[Why]
In the case where we don't support DMUB aux but we have DPIA links
in the configuration we might try to message AUX using the legacy
path - where DDC pin is NULL. This causes a NULL pointer dereference.
[How]
Guard against NULL DDC pin, return a failure for aux engine acquire.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some parts are consuming dangerously close to maximum number of states
supported when updating the BB (i.e. 8).
[how]
Change maximum stages from 9 to 20.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While applying a state to hardware, there is a transition period where
the back-end is reset using the old state; then enabled using the new
state.
Generally, the link encoder configuration module queries
stream-to-encoder assignments in either the new or old state based on a
mode variable. During the transition there is a need to query both
states, however toggling this mode variable can lead to incorrect
programming of encoders.
[How]
- Add new function to explicity query stream-to-encoder assignment
in the current state rather than intermittently switch the mode
of operation of the link encoder assignment module.
- Add additional checks for encoder assignment defects.
- Explicitly reset the mode of operation if application of state
to hardware ends prematurely.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
When adding/removing a plane to some configurations, unsupported pipe
programming can occur when moving to a new plane. Such cases include pipe
split on multi-display, with MPO, and/or ODM.
[HOW?]
Add a safe transistion state that minimizes pipe usage before programming
new configuration. When adding a plane, the current state has the least
pipes required so it is applied without splitting. This must be applied
prior to updating the plane_state for seamless transition. When removing a
plane, the new state has the least pieps required so it is applied without
splitting.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Found when running igt@kms_atomic.
Userspace attempts to do a TEST_COMMIT when 0 streams which calls
dc_remove_stream_from_ctx. This in turn calls link_enc_unassign which
ends up modifying stream->link = NULL directly, causing the global
link_enc to be removed preventing further link activity and future link
validation from passing.
[How]
We take care of link_enc unassignment at the start of
link_enc_cfg_link_encs_assign so this call is no longer necessary.
Fixes global state from being modified while unlocked.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to enable Firmware Assisted Memory (FAMS) Switching, but first,
we need to add the required code infrastructure in DC before allowing it
in amdgpu_dm.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After some experimental tests, we noticed that we need to set
gpuvm_max_page_table_levels to '4' to meet the hardware requirements.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For Pixel Rate control, when on HDMI, HDMI DTO should be selected
instead of DP DTO.
[How]
Pass HDMI parameter for HDMI stream, and select correct DTO.
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MPO we want to allocate less than maximum DET for MPO pipes because
we need enogh buffer to move DET back to other pipes when removing an
MPO plane. Also update regular DET allocation to use DET override (DCN32
has an internal policy which driver does not want to use)
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we check if pixel_encoding is equal to
PIXEL_ENCODING_YCBCR422 to get the k1/k2 div parameters. This commit
changes this logic slightly by checking if two pixels per container are
used.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Most of the time, a single display uses the ODM combine. When using
multi-display, we use ODM combine only if it is necessary. These cases
are not flexible enough for us, and we can improve them to take
advantage of our hardware. We want to have more control over the ODM
policy.
[How]
This commit add a new debug flag named
enable_single_display_2to1_odm_policy to control the ODM policy and
another flag named enable_dp_dig_pixel_rate_div_policy to fine control
the ODM combine. This is possible by adding a new "pipe.dest" parameter
that can be set to ODM 2:1 combined if we use a single display. For
dynamic ODM combine, when using DP-DIG, DCN applies K2=2 settings for
ODM combine. Note that this feature affects the following registers:
- timing.pix_clk_100khz -> DP_VID_M, DP_VID_N
- requested_pix_clk_100hz -> DP_DTOn_PHASE
- OTGn_PIXEL_RATE_DIVK2
- DP_PIXEL_PER_CYCLE_PROCESSING_MODE
- DIG_FIFO_OUTPUT_PIXEL_MODE
- DP_VID_N_MUL
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]:
Lut pipeline will be hooked up differently in some asics
need to add new interfaces and missing registers.
[HOW]:
Add missing registers and hook up programming from DPP for pre-blend
lut.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit enables the SubVP feature. To achieve that, we need to:
- Don't force p-state disallow on SubVP (can't block dummy p-state)
- Send calculated watermark to DMCUB for SubVP
- Adjust CAB mode message to PMFW
- Add a proper locking sequence for SubVP
- Various fixes to SubVP static analysis and determining SubVP config
- Currently SubVP not supported with pipe split so merge all pipes
before setting up SubVp
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes when trying to enable some feature, we have to define some
values with educated guesses, but we mark those values as TBD, which
means "To Be Determined". However, the correct way to approach it is by
loading that information from the firmware. Anyway, some of the values
that we were experimenting with caused this issue:
ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by removing the division by two since it is
harmless in this case.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Redundant if-else cases for repeater and non-repeater checks
[How]
Without changing the core logic, rearranged the code by removing
redundant checks
Signed-off-by: Chandan Vurdigere Nataraj <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Some userspace expect a backwards compatible modifier on DCN32/321. For
hardware with num_pipes more than 16, we expose the most efficient
modifier first. As a fall back method, we need to expose slightly inefficient
modifier AMD_FMT_MOD_TILE_GFX9_64K_R_X after the best option.
Also set the number of packers to fixed value as required per hardware
documentation. This value is cached during hardware initialization and
can be read through the base driver.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are 4 undocumented fields at struct amdgpu_display_manager.
Add documentation for them, fixing those warnings:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'dmub_outbox_params' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'num_of_edps' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'disable_hpd_irq' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'dmub_aux_transfer_done' not described in 'amdgpu_display_manager'
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:544: warning: Function parameter or member 'delayed_hpd_wq' not described in 'amdgpu_display_manager'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn32/irq_service_dcn32.c:39:20: warning: symbol 'to_dal_irq_source_dcn32' was not declared. Should it be static?
to_dal_irq_source_dnc32() is only referenced in irq_service_dnc32.c, so change its
storage class specifier to static.
Fixes: 0efd4374f6 ("drm/amd/display: add dcn32 IRQ changes")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sparse reports
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3885:6: warning: symbol 'FORCE_RATE' was not declared. Should it be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:3886:10: warning: symbol 'FORCE_LANE_COUNT' was not declared. Should it be static?
Neither of thse variables is used in dc_link_dp.c. Reviewing the commit listed in
the fixes tag shows neither was used in the original patch. So remove them.
Fixes: 265280b998 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel test robot throws below warning ->
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:
In function 'dc_link_reduce_mst_payload':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:3782:32:
warning: variable 'ret' set but not used [-Wunused-but-set-variable]
3782 | enum act_return_status ret;
Removed the unused ret variable.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move more stack variable in to dummy vars structure on the heap.
Fixes stack frame size errors:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3833:1: error: the frame size of 2720 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3833 | } // ModeSupportAndSystemConfigurationFull
| ^
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira Jordao <Rodrigo.Siqueira@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 5089c4a8eb.
This breaks validation and enumeration of display capable modifiers.
The early return true means the rest of the validation code never gets
executed, and we need that to enumerate the right modifiers to userspace
for the format.
The modifiers that are in the initial list generated for a plane are the
superset for all formats and we need the proper checks in this function
to filter some of them out for formats with which they're invalid to be
used.
Furthermore, the safety contract here is that we validate the incoming
modifiers to ensure the kernel can handle them and the display hardware
can handle them. This includes e.g. rejecting multi-plane images with DCC.
Note that the legacy swizzle mechanism allows encoding more swizzles, and
at fb creation time we convert them to modifiers and reject those with
no corresponding modifiers. If we are seeing rejections I'm happy to
help define modifiers that correspond to those, or if absolutely needed
implement a fallback path to allow for less strict validation of the
legacy path.
However, I'd like to revert this patch, since any of these is going to
be a significant rework of the patch, and I'd rather not the regression
gets into a release or forgotten in the meantime.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c:549:4: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation]
pll_req = dc_fixpt_from_int(pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_int);
^
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c:542:3: note: previous statement is here
else
^
1 warning generated.
Indent this statement to the left, as it was clearly intended to be
called unconditionally, which will fix the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1655
Fixes: 3e838f7ccf ("drm/amd/display: Get VCO frequency from registers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DCN20 and above, the code that actually hooks up the provided
input_color_space got lost at some point.
Fixes COLOR_ENCODING and COLOR_RANGE doing nothing on DCN20+.
Tested using Steam Remote Play Together + gamescope.
Update other DCNs the same wasy DCN1.x was updates in
commit a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Fixes: a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
A variety of Lenovo machines with Rembrandt APUs and OLED panels have
stopped showing the display at login. This behavior clears up after
leaving it idle and moving the mouse or touching keyboard.
It was bisected to be caused by commit 559e265522 ("drm/amd/display:
keep eDP Vdd on when eDP stream is already enabled"). Revert this commit
to fix the issue.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2047
Reported-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 559e265522 ("drm/amd/display: keep eDP Vdd on when eDP stream is already enabled")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenovo.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
GCC 12 catches the following incorrect comparison in the if arm
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c: In function ‘dml32_ModeSupportAndSystemConfigurationFull’:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:3740:33: error: the comparison will always evaluate as ‘true’ for the address of ‘USRRetrainingSupport’ will never be NULL [-Werror=address]
3740 | || &mode_lib->vba.USRRetrainingSupport[i][j])) {
| ^~
In file included from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_lib.h:32,
from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dc.h:45,
from drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:30:
./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_vba.h:1175:14: note: ‘USRRetrainingSupport’ declared here
1175 | bool USRRetrainingSupport[DC__VOLTAGE_STATES][2];
|
Fix this by remove preceding & so that value is compared instead of
address
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
When the a 3d array is used by indexing with only one dimension in an if
condition, the addresses get compared instead of the intended value stored in the
array. GCC 12.1 caught this error:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c: In function ‘DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation’:
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:1007:45: error: the comparison will always evaluate as ‘true’ for the address of ‘use_one_row_for_frame_flip’ will never be NULL [-Werror=address]
1007 | if (v->use_one_row_for_frame_flip[k]) {
| ^
In file included from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_lib.h:32,
from ./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dc.h:45,
from drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/dcn32/display_mode_vba_32.c:30:
./drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/dml/display_mode_vba.h:605:14: note: ‘use_one_row_for_frame_flip’ declared here
605 | bool use_one_row_for_frame_flip[DC__VOLTAGE_STATES][2][DC__NUM_DPP__MAX];
|
Fix this by explicitly specifying the last two indices.
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DRM_AMDGPU Kconfig code contains:
select BACKLIGHT_CLASS_DEVICE
So the condition these ifdefs test for is always true, drop them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DCN20 and above, the code that actually hooks up the provided
input_color_space got lost at some point.
Fixes COLOR_ENCODING and COLOR_RANGE doing nothing on DCN20+.
Tested using Steam Remote Play Together + gamescope.
Update other DCNs the same wasy DCN1.x was updates in
commit a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Fixes: a1e07ba89d ("drm/amd/display: Use plane->color_space for dpp if specified")
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
