[Why]
We don't write out attributes after disabling and re-enabling the link
on some monitors, causing some, but not all, HDMI displays to fail to
lightup on DCN314.
[How]
Firmware used to do this after DIG link setup.
Since firmware is no longer doing this to support USB4 and dynamic link
remapping we'll need to add this to driver in the equivalent paths.
New optional callbacks were created in the stream encoder interface and
implementations were added for DCN314.
Reviewed-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In some cases MPC tree bottom pipe ends up point to itself. This causes
iterating from top to bottom to hang the system in an infinite loop.
[how]
When looping to next MPC bottom pipe, check that the pointer is not same
as current to avoid infinite loop.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move additional dummy structures off the stack and into
the dummy vars structure.
Fixes the following:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1659:1: error: the frame size of 2144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
1659 | }
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3799 | } // ModeSupportAndSystemConfigurationFull
| ^
v2: move more stuff to dummy structure, fix init order (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
[Why]
While parsing dc_version redundant check leads to
invalid dc_version for dcn314.
[How]
Remove redundant check
Fixes: ee7b62e127 ("drm/amd/display: Enable DCN314 in DC")
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The -mno-gnu-attribute option in dcn301 clk mgr makefile hides a soft vs
hard fp error for powerpc. After removing this flag, we can see some FPU
code remains there:
gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.o
uses soft float
Therefore, remove the -mno-gnu-attribute flag for dcn301/powerpc and
move FPU-associated code to DML folder.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The -mno-gnu-attribute option in clk mgr makefile for dcn30 hides a soft
vs hard fp error for powerpc. After removing this flag, we can see some
FPU code remains there:
gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.o
uses soft float
Therefore, remove the -mno-gnu-attribute flag for dcn30/powerpc and move
FPU-associated code to DML folder.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The -mno-gnu-attribute option in dcn21 clk mgr makefile hides a soft vs
hard fp error for powerpc. After removing this flag, we can see some FPU
code remains there:
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses
hard float,
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.o uses
soft float
Therefore, remove the -mno-gnu-attribute flag for dcn21/powerpc and move
FPU-associated code to DML folder.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Many lines of code in dcn31_resource_construct are wrapped by DC_FP
macro to protect FPU operations; however, there is no FPU in this
region. Therefore, just remove the wrapper for clarity.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move remaining FPU code to DML folder that caused compilation error for
powerpc. This patch depends on [1] to prevent the error below:
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o uses soft float
/gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o
[1] https://lore.kernel.org/amd-gfx/20220716195144.342960-1-mwen@igalia.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Isolate FPU operation for DCN32/321 under the DML folder
- Create a specific file for CRTC and plane based on amdgpu_dm
- Fix DSC issues
- Update DML logic
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The file dcn321_resource has a lot of FPU operations that should be
inside the dml folder. This commit introduces the dcn321_fpu file and
moves some of the FPU operation functions to this new file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The insert_entry_into_table_sorted function uses FPU operation and calls
other static functions support. This commit moves the insert entry
function with all the required struct and static functions to the FPU
file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_predict_pipe_split uses FPU operations. This commit
moves this function to the dcn32_fpu file, and we ensure that we only
invoke it under the kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_helper_populate_phantom_dlg_params uses FPU
operations. For this reason, this commit moves this function to the
dcn32_fpu file, and we ensure that we only invoke it under the
kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are working to isolate FPU operations inside the DML folder, and the
file dcn32_clk_mgr has some of these operations. This commit moves the
FPU operations inside the clock manager and creates the dcn32_fpu file
to aggregate those operations. Note that there is no functional change
ere, just moving code from one part to another.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e7ef5569e71bf3fec01ea513c27c6081c0dbbc64.
Idle optimization was disabled due to SMU and firmware bugs. Enable it
back for DCN32. DCN321 has them enabled already
Fixes: 6a640b95b0 ("drm/amd/display: disable idle optimizations")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Unbounded request logic in resource/DML has some issues where unbounded
request is being enabled incorrectly. SW today enables unbounded request
unconditionally in hardware, on the assumption that HW can always
support it in single pipe scenarios.
This worked until now because the same assumption is made in DML. A new
DML update is needed to fix a bug, where there are single pipe scenarios
where unbounded cannot be enabled, and this change in DML needs to be
ported in, and dcn32 resource logic fixed.
[how]
First, dcn32_resource should program unbounded req in HW according to
unbounded req enablement output from DML, as opposed to DML input.
Second, port in DML update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There are cases where the pipes populated are not all at the top
of the pipes list under context. Loop through all pipes for DET
allocation instead of just the number of populated ones, even if
some unpopulated pipes are iterated through unnecessarily.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VM enabled in IP configuration causes UCLK not
reaching DPM0. The expectation for VM enable should
be that KMD will indicate to DAL when VM is enabled,
then DAL will set the bit accordingly
[How]
Set gpuvm_enable to zero in DCN3_20 and DCN3_21 resource.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although dcn31_update_soc_for_wm_a() is only called in dml/dcn31/dcn31_fpu by
dc->res_pool->funcs->update_soc_for_wm_a(dc, context), it's declared in
dcn31_resource that is not FPU protected. Move this function to dcn31_fpu
file as part of the work to isolate FPU code.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variable MaxUsedBW from the function
DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation.
As a side-effect, the variables MaxPerPlaneVActiveWRBandwidth and
WRBandwidth are also removed.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3043:10:
warning: variable 'MaxUsedBW' set but not used [-Wunused-but-set-variable]
double MaxUsedBW = 0;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable regval from the function enc1_update_generic_info_packet
and the variables dynamic_range_rgb and dynamic_range_ycbcr from the
function enc1_stream_encoder_dp_set_stream_attribute are not currently
used.
This was pointed by clang with the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:62:11:
warning: variable 'regval' set but not used [-Wunused-but-set-variable]
uint32_t regval;
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:262:10:
warning: variable 'dynamic_range_rgb' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_rgb = 0; /*full range*/
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:263:10:
warning: variable 'dynamic_range_ycbcr' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_ycbcr = 1; /*bt709*/
^
3 warnings generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variables dispclk_delay_subtotal and dppclk_delay_subtotal from
the function dml_rq_dlg_get_dlg_params.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:920:15:
warning: variable 'dispclk_delay_subtotal' set but not used [-Wunused-but-set-variable]
unsigned int dispclk_delay_subtotal;
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:919:15:
warning: variable 'dppclk_delay_subtotal' set but not used [-Wunused-but-set-variable]
unsigned int dppclk_delay_subtotal;
^
2 warnings generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the unused unsigned int NumberOfStates from the file, which was
declared but never hooked up.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:33:27:
warning: unused variable 'NumberOfStates' [-Wunused-const-variable]
static const unsigned int NumberOfStates = DC__VOLTAGE_STATES;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dml32_CalculatedoublePipeDPPCLKAndSCLThroughput function, which is not used in
the codebase.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:6:
warning: no previous prototype for function
'dml32_CalculatedoublePipeDPPCLKAndSCLThroughput' [-Wmissing-prototypes]
void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput(
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:1:
note: declare 'static' if the function is not intended to be used outside of
this translation unit
void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput(
^
static
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variable clk_src from the function dcn3_get_pix_clk_dividers.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1279:25: warning:
variable 'clk_src' set but not used [-Wunused-but-set-variable]
struct dce110_clk_src *clk_src;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain MPO configurations, DML will split a pipe after DET buffer has
already been allocated by driver, resulting in allocation of more DET
segments than the configurable return buffer has, causing underflow.
[How]
Determine during DET override calculation whether or not a pipe will be
split later on by DML, and distribute DET segments based on expected
number of pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In general cases we want to keep the dram clock change requirement (we
prefer configs that support MCLK switch). Only override to false for
SubVP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to calculate the DTB clock values when DSC is enabled; however,
this is not the current behavior implemented in DCN32. Right now, DML is
trying to calculate DSC values even if DSC is disabled; as a result, we
can have a hard hang due to wrong clock calculation. This commit fixes
this issue by moving the calculation after the DSC check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Number of DSC slices is an input to DML with high dependency
on display specific capability. This isn't something DML can decide
on its own. DML has to use the original number of DSC slices input
to DML during validation without modification. Otherwise the
computed DSC delay will not reflect the current configuration
and therefore causes validation failures.
[how]
Remove DML override for number of DSC slices parameter.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When CONFIG_DRM_AMD_SECURE_DISPLAY is enabled, it will try
to register vertical interrupt 0 for specific task.
Currently, only dcn10 have defined relevant info for vertical interrupt
0. If we enable CONFIG_DRM_AMD_SECURE_DISPLAY for other dcn ASIC, will
get DC_IRQ_SOURCE_INVALID while calling dc_interrupt_to_irq_source() and
cause pointer errors.
[How]
Add support of vertical interrupt 0 for all dcn ASIC.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains that:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3369 commit_planes_for_stream()
warn: variable dereferenced before check 'stream' (see line 3114)
The 'stream' pointer cannot be NULL and the check can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
