The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.
But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.
So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.
Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Balazs Nemeth says:
====================
net: prevent infinite loop caused by incorrect proto from virtio_net_hdr_set_proto
These patches prevent an infinite loop for gso packets with a protocol
from virtio net hdr that doesn't match the protocol in the packet.
Note that packets coming from a device without
header_ops->parse_protocol being implemented will not be caught by
the check in virtio_net_hdr_to_skb, but the infinite loop will still
be prevented by the check in the gso layer.
Changes from v2 to v3:
- Remove unused *eth.
- Use MPLS_HLEN to also check if the MPLS header length is a multiple
of four.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.
An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.
Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.
Fixes: 9274124f02 ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't assign dp to partner if it's the same port that xrs700x_hsr_join
was called with. The partner port is supposed to be the other port in
the HSR/PRP redundant pair not the same port. This fixes an issue
observed in testing where forwarding between redundant HSR ports on this
switch didn't work depending on the order the ports were added to the
hsr device.
Fixes: bd62e6f5e6 ("net: dsa: xrs700x: add HSR offloading support")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.
In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.
If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"
To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".
We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.
fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.
I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.
Fixes: 194ccc8829 ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error
return code of bond_neigh_init() is assigned.
To fix this bug, ret is assigned with -EINVAL in these cases.
Fixes: 9e99bfefdb ("bonding: fix bond_neigh_init()")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The txtime is passed to the driver in skb->skb_mstamp_ns, which is
actually in a union with skb->tstamp (the place where software
timestamps are kept).
Since commit b50a5c70ff ("net: allow simultaneous SW and HW transmit
timestamping"), __sock_recv_timestamp has some logic for making sure
that the two calls to skb_tstamp_tx:
skb_tx_timestamp(skb) # Software timestamp in the driver
-> skb_tstamp_tx(skb, NULL)
and
skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver
will both do the right thing and in a race-free manner, meaning that
skb_tx_timestamp will deliver a cmsg with the software timestamp only,
and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg
with the hardware timestamp only.
Why are races even possible? Well, because although the software timestamp
skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb)
lives in skb_shinfo(skb), an area which is shared between skbs and their
clones. And skb_tstamp_tx works by cloning the packets when timestamping
them, therefore attempting to perform hardware timestamping on an skb's
clone will also change the hardware timestamp of the original skb. And
the original skb might have been yet again cloned for software
timestamping, at an earlier stage.
So the logic in __sock_recv_timestamp can't be as simple as saying
"does this skb have a hardware timestamp? if yes I'll send the hardware
timestamp to the socket, otherwise I'll send the software timestamp",
precisely because the hardware timestamp is shared.
Instead, it's quite the other way around: __sock_recv_timestamp says
"does this skb have a software timestamp? if yes, I'll send the software
timestamp, otherwise the hardware one". This works because the software
timestamp is not shared with clones.
But that means we have a problem when we attempt hardware timestamping
with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp
will say "oh, yeah, this must be some sort of odd clone" and will not
deliver the hardware timestamp to the socket. And this is exactly what
is happening when we have txtime enabled on the socket: as mentioned,
that is put in a union with skb->tstamp, so it is quite easy to mistake
it.
Do what other drivers do (intel igb/igc) and write zero to skb->tstamp
before taking the hardware timestamp. It's of no use to us now (we're
already on the TX confirmation path).
Fixes: 0d08c9ec7d ("enetc: add support time specific departure base on the qos etf")
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The second IRQ line really is optional, so use
platform_get_irq_optional() to obtain it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We must disable the regulator that was enabled in the probe function.
Fixes: 7994fe55a4 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the probe fails or requests to be defered, we must disable the
regulator that was previously enabled.
Fixes: 7994fe55a4 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias reports that after the blamed patch, VLAN objects being added to
a bridge device are being added to all slave ports instead (swp2, swp3).
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br0
bridge vlan add dev br0 vid 100 self
This is because the fix was too broad: we made dsa_port_offloads_netdev
say "yes, I offload the br0 bridge" for all slave ports, but we didn't
add the checks whether the switchdev object was in fact meant for the
physical port or for the bridge itself. So we are reacting on events in
a way in which we shouldn't.
The reason why the fix was too broad is because the question itself,
"does this DSA port offload this netdev", was too broad in the first
place. The solution is to disambiguate the question and separate it into
two different functions, one to be called for each switchdev attribute /
object that has an orig_dev == net_bridge (dsa_port_offloads_bridge),
and the other for orig_dev == net_bridge_port (*_offloads_bridge_port).
In the case of VLAN objects on the bridge interface, this solves the
problem because we know that VLAN objects are per bridge port and not
per bridge. And when orig_dev is equal to the net_bridge, we offload it
as a bridge, but not as a bridge port; that's how we are able to skip
reacting on those events. Note that this is compatible with future plans
to have explicit offloading of VLAN objects on the bridge interface as a
bridge port (in DSA, this signifies that we should add that VLAN towards
the CPU port).
Fixes: 99b8202b17 ("net: dsa: fix SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING getting ignored")
Reported-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of
uhdlc_init() is assigned.
To fix this bug, ret is assigned with -ENOMEM in these cases.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hns_assemble_skb() returns NULL to skb, no error return code of
hns_nic_clear_all_rx_fetch() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Errors in protocol should be logged when the driver aborts operations.
If the driver can carry on and "humor" the device, then emitting
the message as debug output level is fine.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several error paths in bind/probe code will only emit
output using dev_dbg. But if we are going to fail the
bind/probe, emit related output with "err" priority.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mundane typos fixes throughout the file.
s/establised/established/
s/availbale/available/
s/vaues/values/
s/Incase/In case/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As of commit bb475230b8 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.
This allows to unconditionally return errors from
devm_reset_control_get_optional_exclusive.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect enum type definition in nfnetlink_cthelper UAPI,
from Dmitry V. Levin.
2) Remove extra space in deprecated automatic helper assignment
notice, from Klemen Košir.
3) Drop early socket demux socket after NAT mangling, from
Florian Westphal. Add a test to exercise this bug.
4) Fix bogus invalid packet report in the conntrack TCP tracker,
also from Florian.
5) Fix access to xt[NFPROTO_UNSPEC] list with no mutex
in target/match_revfn(), from Vasily Averin.
6) Disallow updates on the table ownership flag.
7) Fix double hook unregistration of tables with owner.
8) Remove bogus check on the table owner in __nft_release_tables().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Trim all 4 bytes of the received FCS; not just 2 of them. Leaving 2
bytes of the FCS on the frame breaks DSA tailing tag drivers.
Fixes: a8db76d40e ("lan743x: boost performance on cpu archs w/o dma cache snooping")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using jumbo packets and overrunning rx queue with napi enabled,
the following sequence is observed in gfar_add_rx_frag:
| lstatus | | skb |
t | lstatus, size, flags | first | len, data_len, *ptr |
---+--------------------------------------+-------+-----------------------+
13 | 18002348, 9032, INTERRUPT LAST | 0 | 9600, 8000, f554c12e |
12 | 10000640, 1600, INTERRUPT | 0 | 8000, 6400, f554c12e |
11 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, f554c12e |
10 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, f554c12e |
09 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, f554c12e |
08 | 14000640, 1600, INTERRUPT FIRST | 0 | 1600, 0, f554c12e |
07 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, f554c12e |
06 | 1c000080, 128, INTERRUPT LAST FIRST | 1 | 0, 0, abf3bd6e |
05 | 18002348, 9032, INTERRUPT LAST | 0 | 8000, 6400, c5a57780 |
04 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, c5a57780 |
03 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, c5a57780 |
02 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, c5a57780 |
01 | 10000640, 1600, INTERRUPT | 0 | 1600, 0, c5a57780 |
00 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, c5a57780 |
So at t=7 a new packets is started but not finished, probably due to rx
overrun - but rx overrun is not indicated in the flags. Instead a new
packets starts at t=8. This results in skb->len to exceed size for the LAST
fragment at t=13 and thus a negative fragment size added to the skb.
This then crashes:
kernel BUG at include/linux/skbuff.h:2277!
Oops: Exception in kernel mode, sig: 5 [#1]
...
NIP [c04689f4] skb_pull+0x2c/0x48
LR [c03f62ac] gfar_clean_rx_ring+0x2e4/0x844
Call Trace:
[ec4bfd38] [c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable)
[ec4bfda8] [c03f6a44] gfar_poll_rx_sq+0x48/0xe4
[ec4bfdc8] [c048d504] __napi_poll+0x54/0x26c
[ec4bfdf8] [c048d908] net_rx_action+0x138/0x2c0
[ec4bfe68] [c06a8f34] __do_softirq+0x3a4/0x4fc
[ec4bfed8] [c0040150] run_ksoftirqd+0x58/0x70
[ec4bfee8] [c0066ecc] smpboot_thread_fn+0x184/0x1cc
[ec4bff08] [c0062718] kthread+0x140/0x144
[ec4bff38] [c0012350] ret_from_kernel_thread+0x14/0x1c
This patch fixes this by checking for computed LAST fragment size, so a
negative sized fragment is never added.
In order to prevent the newer rx frame from getting corrupted, the FIRST
flag is checked to discard the incomplete older frame.
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
RXMAC_BC_FRM_CNT_COUNT added to mp->rx_bcasts twice in a row
in niu_xmac_interrupt(). Remove the second addition.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"len > sp->mtu" checked twice in a row in sp_encaps().
Remove the second check.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The (0xBAF70000 & 0x00FFF000) << 6 should be (0xf70 << 18).
Fixes: 561535b0f2 ("r8169: fix OCP access on RTL8117")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fix semicolon.cocci warning:
tools/testing/selftests/net/ipsec.c:1788:2-3: Unneeded semicolon
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
ibmvnic_remove locks multiple spinlocks while disabling interrupts:
spin_lock_irqsave(&adapter->state_lock, flags);
spin_lock_irqsave(&adapter->rwi_lock, flags);
As reported by coccinelle, the second _irqsave() overwrites the value
saved in 'flags' by the first _irqsave(), therefore when the second
_irqrestore() comes,the value in 'flags' is not valid,the value saved
by the first _irqsave() has been lost.
This likely leads to IRQs remaining disabled. So remove the second
_irqsave():
spin_lock_irqsave(&adapter->state_lock, flags);
spin_lock(&adapter->rwi_lock);
Generated by: ./scripts/coccinelle/locks/flags.cocci
./drivers/net/ethernet/ibm/ibmvnic.c:5413:1-18:
ERROR: nested lock+irqsave that reuses flags from line 5404.
Fixes: 4a41c421f3 ("ibmvnic: serialize access to work queue on remove")
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to use put_unaligned when writing 32-bit DOI value
in cipso_v4_gentag_hdr to avoid unaligned memory access.
v2: unneeded type cast removed as Ondrej Mosnacek suggested.
Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Issue seen when enumerating multiple Intel mGbE interfaces in EHL.
[ 6.898141] intel-eth-pci 0000:00:1d.2: enabling device (0000 -> 0002)
[ 6.900971] intel-eth-pci 0000:00:1d.2: Fail to register stmmac-clk
[ 6.906434] intel-eth-pci 0000:00:1d.2: User ID: 0x51, Synopsys ID: 0x52
We fix it by making the clock name to be unique following the format
of stmmac-pci_name(pci_dev) so that we can differentiate the clock for
these Intel mGbE interfaces in EHL platform as follow:
/sys/kernel/debug/clk/stmmac-0000:00:1d.1
/sys/kernel/debug/clk/stmmac-0000:00:1d.2
/sys/kernel/debug/clk/stmmac-0000:00:1e.4
Fixes: 58da0cfa6c ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For Intel mGbE controller, MAC VLAN filter delete operation will time-out
if serdes power-down sequence happened first during driver remove() with
below message.
[82294.764958] intel-eth-pci 0000:00:1e.4 eth2: stmmac_dvr_remove: removing driver
[82294.778677] intel-eth-pci 0000:00:1e.4 eth2: Timeout accessing MAC_VLAN_Tag_Filter
[82294.779997] intel-eth-pci 0000:00:1e.4 eth2: failed to kill vid 0081/0
[82294.947053] intel-eth-pci 0000:00:1d.2 eth1: stmmac_dvr_remove: removing driver
[82295.002091] intel-eth-pci 0000:00:1d.1 eth0: stmmac_dvr_remove: removing driver
Therefore, we delay the serdes power-down to be after unregister_netdev()
which triggers the VLAN filter delete.
Fixes: b9663b7ca6 ("net: stmmac: Enable SERDES power up/down sequence")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When iavf_process_config() fails, no error return code of
iavf_init_get_resources() is assigned.
To fix this bug, err is assigned with the return value of
iavf_process_config(), and then err is checked.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bdx_read_mac() fails, no error return code of bdx_probe()
is assigned.
To fix this bug, err is assigned with -EFAULT as error return code.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a bug that the moderation config will not be
applied when calling mlx4_en_reset_config. For example, when
turning on rx timestamping, mlx4_en_reset_config() will be called,
causing the NIC to forget previous moderation config.
This fix is in phase with a previous fix:
commit 79c54b6bbf ("net/mlx4_en: Fix TX moderation info loss
after set_ringparam is called")
Tested: Before this patch, on a host with NIC using mlx4, run
netserver and stream TCP to the host at full utilization.
$ sar -I SUM 1
INTR intr/s
14:03:56 sum 48758.00
After rx hwtstamp is enabled:
$ sar -I SUM 1
14:10:38 sum 317771.00
We see the moderation is not working properly and issued 7x more
interrupts.
After the patch, and turned on rx hwtstamp, the rate of interrupts
is as expected:
$ sar -I SUM 1
14:52:11 sum 49332.00
Fixes: 79c54b6bbf ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called")
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
CC: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-03-04
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 4 day(s) which contain
a total of 9 files changed, 128 insertions(+), 40 deletions(-).
The main changes are:
1) Fix 32-bit cmpxchg, from Brendan.
2) Fix atomic+fetch logic, from Ilya.
3) Fix usage of bpf_csum_diff in selftests, from Yauheni.
====================
As pointed out by Ilya and explained in the new comment, there's a
discrepancy between x86 and BPF CMPXCHG semantics: BPF always loads
the value from memory into r0, while x86 only does so when r0 and the
value in memory are different. The same issue affects s390.
At first this might sound like pure semantics, but it makes a real
difference when the comparison is 32-bit, since the load will
zero-extend r0/rax.
The fix is to explicitly zero-extend rax after doing such a
CMPXCHG. Since this problem affects multiple archs, this is done in
the verifier by patching in a BPF_ZEXT_REG instruction after every
32-bit cmpxchg. Any archs that don't need such manual zero-extension
can do a look-ahead with insn_is_zext to skip the unnecessary mov.
Note this still goes on top of Ilya's patch:
https://lore.kernel.org/bpf/20210301154019.129110-1-iii@linux.ibm.com/T/#u
Differences v5->v6[1]:
- Moved is_cmpxchg_insn and ensured it can be safely re-used. Also renamed it
and removed 'inline' to match the style of the is_*_function helpers.
- Fixed up comments in verifier test (thanks for the careful review, Martin!)
Differences v4->v5[1]:
- Moved the logic entirely into opt_subreg_zext_lo32_rnd_hi32, thanks to Martin
for suggesting this.
Differences v3->v4[1]:
- Moved the optimization against pointless zext into the correct place:
opt_subreg_zext_lo32_rnd_hi32 is called _after_ fixup_bpf_calls.
Differences v2->v3[1]:
- Moved patching into fixup_bpf_calls (patch incoming to rename this function)
- Added extra commentary on bpf_jit_needs_zext
- Added check to avoid adding a pointless zext(r0) if there's already one there.
Difference v1->v2[1]: Now solved centrally in the verifier instead of
specifically for the x86 JIT. Thanks to Ilya and Daniel for the suggestions!
[1] v5: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
v4: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t
v3: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
v2: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t
v1: https://lore.kernel.org/bpf/d7ebaefb-bfd6-a441-3ff2-2fdfe699b1d2@iogearbox.net/T/#t
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Fixes: 5ffa25502b ("bpf: Add instructions for atomic_[cmp]xchg")
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current CIPSO and CALIPSO refcounting scheme for the DOI
definitions is a bit flawed in that we:
1. Don't correctly match gets/puts in netlbl_cipsov4_list().
2. Decrement the refcount on each attempt to remove the DOI from the
DOI list, only removing it from the list once the refcount drops
to zero.
This patch fixes these problems by adding the missing "puts" to
netlbl_cipsov4_list() and introduces a more conventional, i.e.
not-buggy, refcounting mechanism to the DOI definitions. Upon the
addition of a DOI to the DOI list, it is initialized with a refcount
of one, removing a DOI from the list removes it from the list and
drops the refcount by one; "gets" and "puts" behave as expected with
respect to refcounts, increasing and decreasing the DOI's refcount by
one.
Fixes: b1edeb1023 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
Fixes: d7cce01504 ("netlabel: Add support for removing a CALIPSO DOI.")
Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last change to ibmvnic_set_mac(), 8fc3672a8a, meant to prevent
users from setting an invalid MAC address on an ibmvnic interface
that has not been brought up yet. The change also prevented the
requested MAC address from being stored by the adapter object for an
ibmvnic interface when the state of the ibmvnic interface is
VNIC_PROBED - that is after probing has finished but before the
ibmvnic interface is brought up. The MAC address stored by the
adapter object is used and sent to the hypervisor for checking when
an ibmvnic interface is brought up.
The ibmvnic driver ignoring the requested MAC address when in
VNIC_PROBED state caused LACP bonds (bonds in 802.3ad mode) with more
than one slave to malfunction. The bonding code must be able to
change the MAC address of its slaves before they are brought up
during enslaving. The inability of kernels with 8fc3672a8a to set
the MAC addresses of bonding slaves is observable in the output of
"ip address show". The MAC addresses of the slaves are the same as
the MAC address of the bond on a working system whereas the slaves
retain their original MAC addresses on a system with a malfunctioning
LACP bond.
Fixes: 8fc3672a8a ("ibmvnic: fix ibmvnic_set_mac")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Fixes for v5.12
These patches from the MPTCP tree fix a few multipath TCP issues:
Patches 1 and 5 clear some stale pointers when subflows close.
Patches 2, 4, and 9 plug some memory leaks.
Patch 3 fixes a memory accounting error identified by syzkaller.
Patches 6 and 7 fix a race condition that slowed data transmission.
Patch 8 adds missing wakeups when write buffer space is freed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the port number is mismatched with the announced ones, use
'goto dispose_child' to free the resources instead of using 'goto out'.
This patch also moves the port number checking code in
subflow_syn_recv_sock before mptcp_finish_join, otherwise subflow_drop_ctx
will fail in dispose_child.
Fixes: 5bc56388c7 ("mptcp: add port number check for MP_JOIN")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__mptcp_clean_una() can free write memory and should wake-up
user-space processes when needed.
When such function is invoked by the MPTCP receive path, the wakeup
is not needed, as the TCP stack will later trigger subflow_write_space
which will do the wakeup as needed.
Other __mptcp_clean_una() call sites need an additional wakeup check
Let's bundle the relevant code in a new helper and use it.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/165
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Fixes: 64b9cea7a0 ("mptcp: fix spurious retransmissions")
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we receive a MPTCP_PUSH_PENDING even from a subflow when
mptcp_release_cb() is serving the previous one, the latter
will be delayed up to the next release_sock(msk).
Address the issue implementing a test/serve loop for such
event.
Additionally rename the push helper to __mptcp_push_pending()
to be more consistent with the existing code.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will simplify the following patch, no functional change
intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
