Commit Graph

560 Commits

Author SHA1 Message Date
Lorenzo Castelli
1839221293 HID: add mappings for a few keys found on Logitech MX3200
The keys are added to the generic wireless mappings in case other
keyboards use them. Note that the product ID for the MX3200 is the same
as USB_DEVICE_ID_S510_RECEIVER_2.

Signed-off-by: Lorenzo Castelli <lcastelli@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-19 13:26:28 +02:00
Stephane Chatty
653efbb4b2 HID: fixed missing inits in hid-cando.c
With flags non initialized, the single touch emulation has an erratic
behavior. Fixed this.

Signed-off-by: Stephane Chatty <chatty@lii-enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-19 13:20:13 +02:00
Bastien Nocera
b5e5a37e36 HID: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE
Add two quirks to make it possible for usbhid module options to
override whether a device is ignored (HID_QUIRK_NO_IGNORE) and
whether to connect a hiddev device (HID_QUIRK_HIDDEV_FORCE).

Passing HID_QUIRK_NO_IGNORE for your device means that it will
not be ignored by the HID layer, even if present in a blacklist.

HID_QUIRK_HIDDEV_FORCE will force the creation of a hiddev for that
device, making it accessible from user-space.

Tested with an Apple IR Receiver, switching it from using appleir
to using lirc's macmini driver.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-19 13:11:43 +02:00
Stephane Chatty
36213e1e40 HID: added support for the Cando dual touch panel
Added support for the Cando dual touch panels, found in the Lenovo S10-3t.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Tested-by: Priya Vijayan <priya.vijayan@intel.com>
Tested-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-15 00:28:11 +02:00
Pete Zaitcev
75c28df87e HID: non-overlapping zeroing of extra bits
From my review of the way the unused bits of report are being zeroed,
it seems like there must be a bug. Currently, the zeroing is done
in hid_output_field and it covers any bits between the last used bit
and the end of the byte. But in case of, say, my keyboard, NumLock is
mask 0x01 and CapsLock is 0x02. Invoking hid_output_field for NumLock
definitely zeroes across CapsLock. The only reason this works is that
the fields are sorted by the offset.

It would be more correct and simpler to zero-fill the buffer into
which the fields are set.

The patch is tested with an IBM keyboard that is improperly sensitive
to out-of-report pad bits, the extra bits are still zeroed and the
fields continue to work as expected. It is also tested with good
keyboards.

In case, a related bug in RHEL 5 is tracked with Red Hat bug 513934.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-13 15:55:49 +02:00
Rafi Rubin
2170c5a8ae HID: ntrig: Emit TOUCH with DOUBLETAP for single touch
I squelched TipSwitch in a recent patch which resulted in the loss
of Touch events for single touch firmwares.  This patch just puts Touch back
in for single touch, and bundles it with DoubleTap (like the multitouch code).
The two events are used to convey the same message to different drivers.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-13 15:22:59 +02:00
Stephane Chatty
6dec143a50 HID: add support for 3M multitouch 22" display
Now support the 22" display and its updated firmware, including touch
width and height.

The number of touches can now go up to 60, and our single touch emulation
will fail when there are more than 6-7 touches; further work is needed on
this.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-11 20:34:50 +02:00
Bruno Prémont
5435f2818e HID: hid-picolcd depends on LCD_CLASS_DEVICE
HID_PICOLCD should depend on LCD_CLASS_DEVICE, otherwise the
build fails when HID_PICOLCD=y and LCD_CLASS_DEVICE=m:

hid-picolcd.c:(.text+0x84523f): undefined reference to `lcd_device_unregister'
hid-picolcd.c:(.text+0x8478ab): undefined reference to `lcd_device_register'
hid-picolcd.c:(.text+0x84c15f): undefined reference to `lcd_device_unregister'

Same applies to FB, BACKLIGHT_CLASS_DEVICE and LEDS_CLASS.

Add suboptions for those features to handle the deps on kbuild side
and just check HID_PICOLCD_* in the code.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-11 20:26:46 +02:00
Jiri Kosina
c872b0fccc HID: egalax: update slab.h include
Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
slab.h is included as necessary.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-10 21:29:09 +02:00
Stephane Chatty
0c3910c255 HID: add support for the eGalax dual-touch panel
Added support for the eGalax dual-touch panel, found on the Asus EeePC T101MT

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Tested-by: Philipp Merkel <linux@philmerk.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-10 21:28:35 +02:00
Raphaël Doursenaud
1ce31b255c HID: add support for cymotion master solar keyboard
Support the solar version of the Cherry's cymotion keyboard line using
existing cherry driver.

Signed-off-by: Raphaël Doursenaud <rdoursenaud@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-08 13:40:52 +02:00
Jiri Kosina
c0858552c0 HID: ntrig: explain firmware quirk
Commit 6549981bc5 ("HID: fix N-trig touch panel with recent firmware")
adds a quirk that is needed for devices with more recent firmware so that
they become operational.

As it's not directly obvious from the code why is it needed, a comment
is worthwile.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-07 12:10:29 +02:00
Stephane Chatty
6549981bc5 HID: fix N-trig touch panel with recent firmware
Added an init message that avoids device freeze with recent firmware.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Tested-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-06 23:14:07 +02:00
Tejun Heo
336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Alan Stern
3d61510f4e HID: usbhid: enable remote wakeup for keyboards
This patch (as1365) enables remote wakeup by default for USB keyboard
devices.  Keyboards in general are supposed to be wakeup devices, but
the correct place to enable it depends on the device's bus; no single
approach will work for all keyboard devices.  In particular, this
covers only USB keyboards (and then only those supporting the boot
protocol).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-03 01:36:03 +02:00
Jiri Kosina
eb741103f1 HID: picolcd: fix build failure
Using copy_{to,from}_user requires the include of linux/uaccess.h.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-01 08:24:42 +02:00
Bruno Prémont
9bbf2b98ba HID: add experimental access to PicoLCD device's EEPROM and FLASH
The PicoLCD device has a small amount of EEPROM and also provides access
to its FLASH where firmware and splash image are saved.
In flasher mode FLASH access is the only active feature.

Give read/write access to both via debugfs files.

NOTE: EEPROM and FLASH access should be switched to better suited API,
      until then the will reside in debugfs

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-31 11:32:31 +02:00
Bruno Prémont
467d652306 HID: add GPO (leds) support to PicoLCD device
Add leds support to PicoLCD device to drive the GPO pins.

GPO support depends on leds class and is only being
compiled if leds class has been selected.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-31 11:32:29 +02:00
Bruno Prémont
e8d931bb59 HID: add lcd support to PicoLCD device
Add lcd support to PicoLCD device.

LCD support depends on lcd class and is only being
compiled if lcd class has been selected.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-31 11:32:26 +02:00
Bruno Prémont
f1c2176140 HID: add backlight support to PicoLCD device
Add backlight support to PicoLCD device.

Backlight support depends on backlight class and is only being
compiled if backlight class has been selected.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-31 11:32:11 +02:00
Bruno Prémont
b8c21cf697 HID: add framebuffer support to PicoLCD device
Add framebuffer support to PicoLCD device with use of deferred-io.

Only changed areas of framebuffer get sent to device in order to
save USB bandwidth and especially resources on PicoLCD device or
allow higher refresh rate for a small area. Changed tiles are
determined while updating shadow framebuffer.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-31 11:21:29 +02:00
Bruno Prémont
236db47c2b HID: new driver for PicoLCD device
Add basic driver for PicoLCD graphics device.
Initially support keypad with input device and provide support
for debugging communication via events file from debugfs.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-31 11:20:59 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jiri Kosina
da54a0ced4 HID: update BKL comment in hiddev
Update comment explaining BKL usage in legacy hiddev driver.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-30 10:16:33 +02:00
Tejun Heo
ed28f04b27 HID: update gfp/slab.h includes
Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-30 00:41:35 +02:00
Anisse Astier
c565c54d9b HID: Add NOGET quirk for Quanta Pixart touchscreen
Add the NOGET quirk for the Quanta optical touchscreen present on MSI AE2220,
Otherwise, the hid-quanta driver timeouts at load time:

drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
quanta-touch 0003:0408:3001.0003: timeout initializing reports
input: PixArt Imaging Inc. Optical Touch Screen as /class/input/input7
quanta-touch 0003:0408:3001.0003: input: USB HID v1.10 Device [PixArt Imaging Inc. Optical Touch Screen] on usb-0000:00:06.0-2/input0

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-29 16:32:57 +02:00
Jiri Kosina
0a504541b3 HID: remove excessive _EMERG messages from hidraw
We don't need to shout loudly when device gets disconnected
while hidraw node has been open, as this is properly handled
in disconnect() and protected by minors_lock already.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-25 15:20:01 +01:00
Jiri Kosina
2e57480b2a HID: remove BKL from hidraw
Remove BKL from hidraw, which is possible through fixing the
locking of minors_lock mutex properly -- it is now used to
guard all accessess to hidraw_table[], preventing it to becoming
NULL unexpectedly by unregistering the device.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-25 14:29:14 +01:00
Jiri Kosina
d8e4ebf8b6 HID: fix oops in gyration_event()
Fix oops caused by dereferencing field->hidinput in cases where
the device hasn't been claimed by hid-input.

Reported-by: Andreas Demmer <mail@andreas-demmer.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-23 16:32:37 +01:00
Jiri Kosina
23d386d85a HID: fixup Kconfig entry for Roccat Kone
Make it independent on CONFIG_EMBEDDED (to be in sync with other
"full-fledged" HID drivers which are not simple quirks) and provide
a little bit better text description.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-22 16:33:15 +01:00
Stefan Achatz
14bf62cde7 HID: add driver for Roccat Kone gaming mouse
This Patch adds support for Kone gaming mouse from Roccat.
It provides access to profiles, settings, firmware, weight,
actual settings etc. through sysfs attributes.
Event handling of this mouse differs from standard hid behaviour
in that tilt button press is reported in each move event which
results in strange behaviour if not handled by the driver.

This is a heavily reworked version of the previously introduced driver.
The changes include most of the previously raised concerns,
memory leak and other fixes, code cleanups, adoption of additional
achieved knowlege about the hardware and is (IMHO) a much better version
than before even when I exchanged reduced USB-IO with a bigger memory
consumption.

I refused to implement one mentioned point:
Removing the 'just-because-we-can' attributes. Motivation:
Reading the clipped in weight: I'm no gamer and can't determine the
usefulness of this feature but if the manufacturer implements such a
feature it might make sense to someone and I would unwillingly limit the
functionality besides its such a small feature.
Reading the actual profile and dpi settings: Here I can testify that one
can get lost of the actual settings when switching back and forth.
The manufacturers windows driver has the ability for on-screen-display
of the values and there is a mouse in the market that has an lcd on the
underside of it to show these values. So I think this feature makes sense
not only for me and shouldn't be removed.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-22 16:31:42 +01:00
Przemo Firszt
20a3ce7e49 HID: add sysfs speed attribute for wacom bluetooth tablet
The attribute allows to change reporting speed of tablet from userspace through
sysfs file. The attribute is RW, valid values: 0 is low speed, 1 is high speed.
High speed is the default setting. Using low speed is a workaround if you
experience lag when using the tablet.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-22 09:55:26 +01:00
Przemo Firszt
06c7c313b5 HID: separate mode switching function for wacom bluetooth driver
wacom_poke function allows to switch tablet reporting speed. The patch
dosen't add any new functionality, but it's preparation for user-space
speed switching through sysfs.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-22 09:55:04 +01:00
Linus Torvalds
c6b9e73f2f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: avoid '\0' in hid debugfs events file
  HID: Add RGT Clutch Wheel clutch device id
  HID: ntrig: fix touch events
  HID: add quirk for UC-Logik WP4030 tablet
  HID: magicmouse: fix oops after device removal
2010-03-18 16:52:31 -07:00
Jiri Kosina
f77e347bd4 HID: simplify error handling in hid_input_report()
The handling of failed debugging buffer allocation got overly
complicated. We simply want to skip the debugging code if allocation
fails and go on with event processing.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-18 14:11:53 +01:00
Jiri Kosina
1caea61eda HID: output event in debugfs even if hid_get_report() fails
if hid_get_report() fails for whatever reason, the raw output of
the report doesn't make it into 'events' file in debugfs at all, because
we leave hid_input_report() too soon.

We want the report to be always present for debugging reasons. Move the
code around, so that the event makes it to 'events' file all the time,
even if we are going to discard the report.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-18 12:09:53 +01:00
Bruno Prémont
e639ba481b HID: avoid '\0' in hid debugfs events file
When dumping /sys/kernel/debug/hid/$device/events '\0' characters show up
(invisible if cat to console but shown by less or while looking at a dump
 file).  These are due to hid_debug_event() adding strlen()+1 bytes to the ring
buffer (e.g. including the trailing '\0').  Any roll-over causes a '\0' as well
as hid_debug_event() handles the ring buffers with HID_DEBUG_BUFSIZE-1 size
while hid_debug_events_read() handles it with full HID_DEBUG_BUFSIZE size.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16 13:36:01 +01:00
Przemo Firszt
59d2334ac9 HID: expose wacom pen tablet battery through power_supply class
This patch exposes wacom pen tablet battery capacity and ac state thru
power_supply class is sysfs.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16 11:55:43 +01:00
Bruno Prémont
4da361b691 HID: register debugfs entries before adding device
Register debugfs entries before calling device_add() so debugfs entries are
already present when HID driver's probe function gets called on device hotplug.

Also undo debugfs entry registration if device_add() fails so status
HID_STAT_ADDED and debugfs registration status remain consistent and we don't
leak the debugfs entries.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-15 14:55:40 +01:00
Markus Rathgeb
3ee8f0a2b1 HID: Add RGT Clutch Wheel clutch device id
This patch enables force feedback for the "RGT Force Feedback CLUTCH Racing Wheel".
It only modifies hid-core.c (hid_blacklist) and hid-tmff.c to add the new USB IDs.

Signed-off-by: Markus Rathgeb <rathgeb.markus@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-13 23:30:02 +01:00
Rafi Rubin
2886539d5e HID: ntrig: fix touch events
This reinstates the lost unpressing of BTN_TOUCH.  To prevent undesireably
touch toggles this also deals with tip switch events.

Added a trap to prevent going out of bounds for hidinputs with empty reports.

Clear bits of unused buttons which result in misidentification.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-10 16:10:28 +01:00
Andrej Gelenberg
eff7f270e9 HID: add quirk for UC-Logik WP4030 tablet
Add HID_QUIRK_MULTI_INPUT for UC-Logik tablet.

$ lsusb
...
Bus 004 Device 002: ID 5543:0003 UC-Logic Technology Corp. Genius MousePen 4x3 Tablet/Aquila L1 Tablet

Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-09 13:49:54 +01:00
Michael Poole
28918c211d HID: magicmouse: fix oops after device removal
Ask the HID core not to register an input device for the mouse.
Fix an oops after removing the device, due to leaving the new
input device registered.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-09 13:42:19 +01:00
Dmitry Torokhov
58b939959d Input: scancode in get/set_keycodes should be unsigned
The HID layer has some scan codes of the form 0xffbc0000 for logitech
devices which do not work if scancode is typed as signed int, so we need
to switch to unsigned it instead. While at it keycode being signed does
not make much sense either.

Acked-by: Márton Németh <nm127@freemail.hu>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-08 23:19:15 -08:00
Oliver Neukum
86266452f8 USB: Push BKL on open down into the drivers
Straightforward push into the drivers to allow
auditing individual drivers separately

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:23 -08:00
Jiri Kosina
14ef2b0c02 Merge branches 'upstream', 'raw_report_modifications' and 'apple_magic_mouse' into for-linus
Conflicts:
	drivers/hid/Kconfig
2010-02-25 17:39:16 +01:00
Jiri Kosina
57ab12e418 HID: usbhid: initialize interface pointers early enough
Move the initialization of USB interface pointers from _start()
over to _probe() callback, which is where it belongs.

This fixes case where interface is NULL when parsing of report
descriptor fails.

LKML-Reference: <20100213135720.603e5f64@neptune.home>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-17 14:25:01 +01:00
Jiri Kosina
7f978b9bf5 HID: extend mask for BUTTON usage page
Now that joystick button usages can expand over 15 buttons, we
have to properly mask out the code from hid usage to cover the
whole 0xffff available space.

Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-17 09:36:35 +01:00
Rafi Rubin
ff5cf34c80 HID: hid-ntrig: Single touch mode tap
Add DOUBLETAP to events emitted when in single touch only mode.

Users with a single touch firmware report not seeing the DOUBLETAP events; this
is a side effect of dropping old mapping for confidence. The confidence mapping
may be fine for singletouch mode but causes problems in multitouch mode.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 17:56:20 +01:00
Rafi Rubin
dbf2b17de5 HID: hid-ntrig: multitouch cleanup and fix
This cleans up the identification of multitouch groups and enables
the end of group sync.

Taps are now explicitly handled to adjust for the changes in the
event stream in multitouch mode.  Added triple and quad tap for the
benefit of tools that recognize different tap types but do not have
full multi touch support.

This cleans up the behavior particularly for the latest firmware, which
didn't work particularly well with the older version of the driver.

In this form, when multitouch is active, both mt and st events will come out of
the "N-Trig MultiTouch" device.  And when its not st events will come out of
"N-Trig Touchscreen".

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 13:54:23 +01:00
Rafi Rubin
b0549cf1a3 HID: n-trig: remove unnecessary tool switching
With the pen and touch split apart, we no longer need to inject
additional tool switching events.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 13:53:52 +01:00
Rafi Rubin
943ed464f3 HID: hid-ntrig add multi input quirk and clean up
Added a quirk to enable distinct input devices.  The digitizer utilizes
three inputs to represent pen, multitouch and a normal touch screen.

With the Pen partitioned, it behaves well and does not need special
handling.

Also, I set names to the input devices to clarify the functions of the
various inputs.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-16 13:53:22 +01:00
Oliver Neukum
858155fbcc HID: usbhid: introduce timeout for stuck ctrl/out URBs
Some devices do not react to a control request (seen on APC UPS's) resulting in
a slow stream of messages, "generic-usb ... control queue full".  Therefore
request needs a timeout.

Cc: stable@kernel.org
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-12 13:07:51 +01:00
Michael Poole
71b38bd4c1 HID: magicmouse: coding style and probe failure fixes
Use proper values to initialize bool configuration variables, tabs rather than
spaces, no braces for one-line else clause, __set_bit() when the operation
doesn't have to be atomic, input_set_abs_params() rather than writing the
fields directly, and call hid_hw_stop() when appropriate to handle failures in
the probe.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-11 11:22:35 +01:00
Jiri Kosina
c8a8602b76 HID: remove MODULE_VERSION from new drivers
MODULE_VERSION doesn't make too much sense for drivers merged
into main tree, as git is much better tracking revisions than
any developer might ever be.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 15:29:02 +01:00
Jiri Kosina
9f52314723 HID: fix up Kconfig entry for MagicMouse
Make Apple MagicMouse Kconfig entry consistent with other dirvers.
Also expand the tristate text a little bit more, so that it doesn't
clash with already existing HID_APPLE.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:59:03 +01:00
Michael Poole
128537cea4 HID: add a device driver for the Apple Magic Mouse.
The Magic Mouse requires that a driver send an unlock Report(Feature) command,
similar to the Wacom wireless tablet and Sixaxis controller quirks.  This turns
on an Input Report that isn't published in the input Report descriptor that
contains touch data (and usually overrides the normal motion and click Report).

Because the mouse has only one switch and no scroll wheel, the driver
(under control of parameters) emulates a middle button and scroll wheel.
User space could also ignore and/or re-synthesize those events based on
the reported events.

Some user-space tools to talk to the mouse directly (that is, when it is not
associated with the host's HIDP stack) are at
http://github.com/entrope/linux-magicmouse

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:57:33 +01:00
Michael Poole
90a006abf8 HID: Export hid_register_report
The Apple Magic Mouse (and probably other devices) publish reports that are not
called out in their HID report descriptors -- they only send them when enabled
through other writes to the device.  This allows a driver to handle these
unlisted reports.

Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:57:30 +01:00
Stephane Chatty
77f720b71d HID: Support for MosArt multitouch panel
Added support for MosArt dual-touch panels, present in the Asus T91MT notebook.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 14:52:12 +01:00
Stephane Chatty
580363db92 HID: add pressure support for the Stantum multitouch panel
Added pressure handling for Stantum multitouch panels

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 12:12:43 +01:00
Stephane Chatty
b32758c721 HID: fixed bug in single-touch emulation on the stantum panel
Fixed stupid copy-paste bug in touchscreen emulation for the Stantum multitouch
panel: a flag was reset just before being tested.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10 12:09:17 +01:00
Bastien Nocera
eabe5c9058 HID: fix typo in error message
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:43:19 +01:00
Leo P White
0690535d6b HID: add mapping for "AL Network Chat" usage
Adding a mapping for the 'AL Network Chat' usage from the 'Consumer' usage
page (USB HID Usage Tables v1.11). This usage is used by some keyboards for
a multimedia key.

Signed-off-by: Leo P White <lpw25@cam.ac.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:23:00 +01:00
Thadeu Lima de Souza Cascardo
c2c3489c5b HID: use multi input quirk for TouchPack touchscreen
This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Daniel Oliveira Nascimento <don@syst.com.br>
[jkosina@suse.cz: fixed blacklist ordering while resolving conflict]
[jkosina@suse.cz: fixed typo to make it compile]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-04 18:50:23 +01:00
Jiri Kosina
2dbf209d7a HID: make full-fledged hid-bus drivers properly selectable
For historical reasons, we don't have most of the in-tree
drivers residing on hid-bus properly selectable in kernel
configuration unless CONFIG_EMBEDDED is set.

This has been introduced on Linus' request from 14 Oct

===
As to the Kconfig options - do they really add so much space that you need to
ask for the quirks? You didn't use to. Can you make the questions depend on
EMBEDDED, or at least on the HID_COMPAT thing or whatever?
===

This still makes perfect sense for small and tiny drivers, which
just fix report descriptors, fix up HID->input mappings that slightly
violates HUT standard, send one extra packet to the device that is
needed before it becomes functional, etc.

Since then, we have been gathering more and more HID-bus drivers,
which are full-fledged drivers. For these, the size argument becomes
more valid. Plus the devices are much more special than "just violates
HID specification in this one or two tiny unimportant points".

Therefore I am marking such drivers as properly selectable no matter
the setting of CONFIG_EMBEDDED, while keeping all the small and tiny
ones compiled by default.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 16:23:45 +01:00
Jiri Kosina
342f31e84e HID: make Wacom modesetting failures non-fatal
With Wacom tablet mode-setting moved from userspace into kernel,
we don't have to consider failures of device queries through the
_raw callback as hard failure, as the driver can safely continue
anyway.

This is consistent with the current USB driver in wacom_sys.c

Reported-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:52:31 +01:00
Bastien Nocera
f9ce7c283c HID: Enable Sixaxis controller over Bluetooth
Now that hid_output_raw_report works, port the PS3 Sixaxis
Bluetooth quirk from user-space, into kernel-space.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:47:53 +01:00
Bastien Nocera
46a709b900 HID: Implement Wacom quirk in the kernel
The hid-wacom driver required user-space to poke at the tablet
to make it send data about the cursor location.

This patch makes it do the same thing but in the kernel.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:45:49 +01:00
Jiri Kosina
d4bfa033ed HID: make raw reports possible for both feature and output reports
In commit 2da31939a4 ("Bluetooth: Implement raw output support for HIDP
layer"), support for Bluetooth hid_output_raw_report was added, but it
pushes the data to the intr socket instead of the ctrl one. This has been
fixed by 6bf8268f9a ("Bluetooth: Use the control channel for raw HID reports")

Still, it is necessary to distinguish whether the report in question should be
either FEATURE or OUTPUT. For this, we have to extend the generic HID API,
so that hid_output_raw_report() callback provides means to specify this
value so that it can be passed down to lower level hardware drivers (currently
Bluetooth and USB).

Based on original patch by Bastien Nocera <hadess@hadess.net>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 15:41:52 +01:00
Alex Neblett
f54405db66 HID: add support for Pixart Imaging Optical Touch Screen
Added support for the Pixart Imaging Inc. Optical Touch Screen found in the MSI
AE2220 and other new all in one computers to the Quanta Optical Touch
dual-touch panel driver found in the latest git clone
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git.

Signed-off-by: Alex Neblett <alexneblett01@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 12:03:26 +01:00
Jiri Kosina
e1a0bdd802 Merge branch 'master' into upstream
Conflicts:
	drivers/hid/hid-ids.h
2010-02-02 23:10:39 +01:00
Thadeu Lima de Souza Cascardo
8127f4e883 HID: use multi input quirk for eTurboTouch touchscreen
This device generates ABS_Z and ABS_RX events, while it should be
generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves
this issue.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Daniel Oliveira Nascimento <don@syst.com.br>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-02 23:05:38 +01:00
Alexander Shishkin
1c3a02c215 HID: add NOGET quirk for Prodige Cordless Combo
I happen to own a keyboard identified as 05af:3062 which is labeled as
"FlatX Coldless Combo" by "Prodige", which exhibits input problems without
NOGET quirk. For some reason, lsusb reports this device as "Jing-Mold
Enterprise Co., Ltd", which is not mentioned anywhere on the package.
A quick search on the intenet shows that there a other people who have
this in their lsusb output, but apparently they don't have the problem
I am seeing (or they are not such furious typists as myself).

Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-02 21:30:34 +01:00
Jiri Kosina
7d39e84991 HID: update copyright
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-02 20:46:34 +01:00
Johnathon Harris
cd9ec30da5 HID: add support for Ortek WKB-2000
This patch adds a new USB HID driver for the Ortek WKB-2000, working around an
incorrect LogicalMaximum value in the USB resource descriptor.

Tracked by http://bugzilla.kernel.org/show_bug.cgi?id=14787
Bug originally reported by Ubuntu users: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/405390

Signed-off-by: Johnathon Harris <jmharris@gmail.com>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-26 01:57:35 +01:00
H Hartley Sweeten
62e62da856 HID: hid-debug.c: make local symbols static
hid-debug.c: make local symbols static

The symbols hid_resolv_event and hid_dump_input_mapping
are only used locally in this file. Make them static to prevent
the following sparse warnings:

warning: symbol 'hid_resolv_event' was not declared. Should it be static?
warning: symbol 'hid_dump_input_mapping' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-15 11:38:51 +01:00
Linus Torvalds
8866f9df4a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Add BTN_TOOL_FINGER for pad button reporting
  HID: add device IDs for new model of Apple Wireless Keyboard
  HID: fix pad button definition in hid-wacom
  HID: Support 171 byte variant of Samsung USB IR receiver
  HID: blacklist ET&T TC5UH touchscreen controller
2010-01-13 16:10:13 -08:00
Jiri Kosina
4bb9508bbb HID: remove TENX iBuddy from blacklist
There were multiple reports which indicate that vendor messed up horribly
and the same VID/PID combination is used for completely different devices,
some of them requiring the blacklist entry and other not.

Remove the blacklist entry for this combination of VID/PID completely, and let
the user decide and unbind the driver via sysfs eventually, if needed. Proper
fix would be fixing the vendor.

References:

http://lkml.org/lkml/2009/2/10/434
http://bugzilla.kernel.org/show_bug.cgi?id=13411

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-13 12:00:43 +01:00
Przemo Firszt
0e253fdb3b HID: wacom: Add BTN_TOOL_FINGER for pad button reporting
Without this patch xf86-input-wacom driver wasn't able to properly recognise
pad button events. It was also causing some problems with button mapping.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-13 12:00:33 +01:00
Christian Schuerer-Waldheim
23aeb61e7e HID: add device IDs for new model of Apple Wireless Keyboard
Added device IDs for the new model of the Apple Wireless Keyboard
(November 2009).

Signed-off-by: Christian Schuerer-Waldheim <csw@xray.at>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-13 12:00:33 +01:00
Przemo Firszt
d01799b2f3 HID: fix pad button definition in hid-wacom
This fix is required for xorg driver to recognise 2 pad buttons

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-13 12:00:32 +01:00
Stephane Chatty
49e4739a0c HID: add support for Acer T230H multitouch
Add support for the Quanta Optical Touch dual-touch panel, present in the Acer
T230H monitor, HP L2105tm, and Packard-Bell Video 200t.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Tested-by: Jerome Vidal <jerom3@free.fr>
Tested-by: Cedric Berthier <berthiec@gmail.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-13 00:29:16 +01:00
Gary Stein
74f292ca8c HID: add driver for the Logitech Flight System G940
Implements a new USB-HID for Force Feedback based on the normal
Logitech Force Feedback code and FF-Memless.

Currently only supports the FF_CONSTANT effect although the joystick
appears to support additional non-standard ones.

Signed-off-by: Gary Stein <LordCnidarian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-13 00:26:31 +01:00
Márton Németh
d67dec5b2c HID: make USB device id constant
The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-12 14:34:43 +01:00
Stefan Glasenhardt
54a6593d65 HID: allow disabling hard-coded ISO-layout for Apple keyboards
This patch adds a new option named "iso_layout" to the driver
"hid-apple.ko", to allow disabling of the hard-coded ISO-layout.

Disabling the hard-coded layout solves the problem that the kernel-module only
works perfectly for the english/american version of the Apple aluminum
keyboard. Other versions have swapped keys, e.g. the "<"-key  is swapped with
"^"-key on the german keyboard. There is a very long bug-entry on Launchpad to
this problem:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/214786

Signed-off-by: Stefan Glasenhardt <stefan@glasen-hardt.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-06 11:21:37 +01:00
Jiri Kosina
722612cd51 HID: fix parsing of local delimiter with size 0
Acording to HID standard 1.11, value 0 allows for size being 0.
Local delimiter tag has has 0 one of the possible values.

Therefore we need to handle this case properly, to be fully compliant
with the specification.

Reported-by: Marcin Tolysz <tolysz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-05 11:45:52 +01:00
Jiri Kosina
cf2f765f18 HID: handle joysticks with large number of buttons
Current HID code doesn't properly handle HID joysticks which have
larger number of buttons than what fits into current range reserved
for BTN_JOYSTICK.

One such joystick reported to not work properly is Saitek X52 Pro
Flight System.

We can't extend the range to fit more buttons in, because of backwards
compatibility reasons.

Therefore this patch introduces a new BTN_TRIGGER_HAPPY range, and
uses these to map the buttons which are over BTN_JOYSTICK limit.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [for the input.h part]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-04 12:20:56 +01:00
Jiri Kosina
92688c0c3c HID: make Stantum driver standalone config option
Analogically to commit "HID: make 3M PCT touchscreen driver
standalone config option", remove the dependency of Stantum
driver on CONFIG_EMBEDDED, as it is a standalone driver rather
than device quirk.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-04 12:04:59 +01:00
Stephane Chatty
d3fb5454a8 HID: add support for Stantum multitouch panel
Added support for the Stantum multitouch panel.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-04 12:04:08 +01:00
Jiri Kosina
4b186f7203 HID: make 3M PCT touchscreen driver standalone config option
The point behind 'default !EMBEDDED' for certain HID drivers that simple and
straightforward quirks for HID devices (which are implemented as drivers on
HID bus) wouldn't have to be enabled separately, if the device is otherwise
more-or-less HID standard compliant.

But this driver is rather standalone driver, so we'd want to have it normally
selectable.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-23 13:21:34 +01:00
Stephane Chatty
b6353f4f36 HID: Support for 3M multitouch panel
Add support for 3M multitouch panels.

Signed-off-by: Stephane Chatty <chatty@enac.fr>
[jkosina@suse.cz: fix build failure because of inconsistent 3M/MMM defines]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-23 01:28:37 +01:00
Sam Ravnborg
98b8788ae9 drop explicit include of autoconf.h
kbuild.h forces include of autoconf.h on the
commandline using -include - so we do not need to
include the file explicit.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Alan Stern
fb34d53752 USB: remove the auto_pm flag
This patch (as1302) removes the auto_pm flag from struct usb_device.
The flag's only purpose was to distinguish between autosuspends and
external suspends, but that information is now available in the
pm_message_t argument passed to suspend methods.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:21 -08:00
Robert Schedel
3975bc5630 HID: Support 171 byte variant of Samsung USB IR receiver
Extends the existing Samsung USB IrDA (0419:0001) quirk with newly reported 171
byte variant. It needs the same quirk as the other devices already supported
by hid-samsung (wrong logical range)

Refactors duplicate trace call into local helper function.

The original bug report for the new variant is available at the second half of
this ticket page:

  https://bugs.launchpad.net/bugs/326986

Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-11 10:59:02 +01:00
Petr Štetiar
70c66567d1 HID: blacklist ET&T TC5UH touchscreen controller
This patch adds ET&T TC5UH touchscreen controller to HID blacklist,
because this device is handled by input/usbtouchscreen driver.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-10 12:19:39 +01:00
Linus Torvalds
fa395aaec8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...
2009-12-09 19:52:01 -08:00
Jiri Kosina
447753d977 Merge branches 'bkl-removal', 'upstream' and 'upstream-fixes' into for-linus 2009-12-07 18:30:49 +01:00
Peter Hutterer
9db630b48a HID: add multi-input quirk for NextWindow Touchscreen.
These touchscreens are mounted onto HP TouchSmart and the Dell Studio One
19. Without a quirk they report a wrong button set and the x/y coordinates
through ABS_Z/ABS_RX, confusing the higher levels (most notably X.Org's
evdev driver).

Device id 0x003 covers models 1900, 2150, and 2700 [1] though testing could
only be performed on a model 1900.

[1] http://www.nextwindow.com/nextwindow_support/latest_tech_info.html

Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-03 10:51:32 +01:00
Jiri Kosina
e8d0eab4d9 HID: add support for Acan FG-8100 barcode reader
Acan FG-8100 barcode reader (0x04b4/0xbca1) has vendor ID of
cypress and requires the same MIN/MAX swap descriptor quirk
as other barcode readers from cypress.

Reported-by: Stijn Ghesquiere <stijn@applesnail.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-02 22:54:11 +01:00
Jiri Kosina
66d61bec69 HID: make Media key on Logitech DiNovo Mini work
Put proper mapping of Media key on Logitech DiNovo Mini.

According to the specification from Logitech webpage, this
key is intended to launch a Media center.

Reported-by: Stefan Plattner <Stefan.Plattner@ilogs.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-25 16:20:52 +01:00