The FPU usage related to task FPU management is either protected by
disabling interrupts (switch_to, return to user) or via fpregs_lock() which
is a wrapper around local_bh_disable(). When kernel code wants to use the
FPU then it has to check whether it is possible by calling irq_fpu_usable().
But the condition in irq_fpu_usable() is wrong. It allows FPU to be used
when:
!in_interrupt() || interrupted_user_mode() || interrupted_kernel_fpu_idle()
The latter is checking whether some other context already uses FPU in the
kernel, but if that's not the case then it allows FPU to be used
unconditionally even if the calling context interrupted a fpregs_lock()
critical region. If that happens then the FPU state of the interrupted
context becomes corrupted.
Allow in kernel FPU usage only when no other context has in kernel FPU
usage and either the calling context is not hard interrupt context or the
hard interrupt did not interrupt a local bottomhalf disabled region.
It's hard to find a proper Fixes tag as the condition was broken in one way
or the other for a very long time and the eager/lazy FPU changes caused a
lot of churn. Picked something remotely connected from the history.
This survived undetected for quite some time as FPU usage in interrupt
context is rare, but the recent changes to the random code unearthed it at
least on a kernel which had FPU debugging enabled. There is probably a
higher rate of silent corruption as not all issues can be detected by the
FPU debugging code. This will be addressed in a subsequent change.
Fixes: 5d2bd7009f ("x86, fpu: decouple non-lazy/eager fpu restore from xsave")
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220501193102.588689270@linutronix.de
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to
host-side polling after suspend/resume. Non-bootstrap CPUs are
restored correctly by the haltpoll driver because they are hot-unplugged
during suspend and hot-plugged during resume; however, the BSP
is not hotpluggable and remains in host-sde polling mode after
the guest resume. The makes the guest pay for the cost of vmexits
every time the guest enters idle.
Fix it by recording BSP's haltpoll state and resuming it during guest
resume.
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A crash was observed in the ORC unwinder:
BUG: stack guard page was hit at 000000000dd984a2 (stack is 00000000d1caafca..00000000613712f0)
kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
CPU: 93 PID: 23787 Comm: context_switch1 Not tainted 5.4.145 #1
RIP: 0010:unwind_next_frame
Call Trace:
<NMI>
perf_callchain_kernel
get_perf_callchain
perf_callchain
perf_prepare_sample
perf_event_output_forward
__perf_event_overflow
perf_ibs_handle_irq
perf_ibs_nmi_handler
nmi_handle
default_do_nmi
do_nmi
end_repeat_nmi
This was really two bugs:
1) The perf IBS code passed inconsistent regs to the unwinder.
2) The unwinder didn't handle the bad input gracefully.
Fix the latter bug. The ORC unwinder needs to be immune against bad
inputs. The problem is that stack_access_ok() doesn't recheck the
validity of the full range of registers after switching to the next
valid stack with get_stack_info(). Fix that.
[ jpoimboe: rewrote commit log ]
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/1650353656-956624-1-git-send-email-dmtrmonakhov@yandex-team.ru
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:
...
PM: Calling lapic_suspend+0x0/0x210
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
Call Trace:
<TASK>
? restore_processor_state
x86_acpi_suspend_lowlevel
acpi_suspend_enter
suspend_devices_and_enter
pm_suspend.cold
state_store
kobj_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
__x64_sys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
RIP: 0033:0x7fda13c260a7
To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.
[ Pawan: write commit message and productize it. ]
Fixes: e2a1256b17 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Pull x86 fixes from Thomas Gleixner:
"Two x86 fixes related to TSX:
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX
to cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update
which provides TSX development mode does not suddenly make the
system vulnerable to TSX Asynchronous Abort"
* tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Disable TSX development mode at boot
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
Commit 3ee48b6af4 ("mm, x86: Saving vmcore with non-lazy freeing of
vmas") introduced set_iounmap_nonlazy(), which sets vmap_lazy_nr to
lazy_max_pages() + 1, ensuring that any future vunmaps() immediately
purge the vmap areas instead of doing it lazily.
Commit 690467c81b ("mm/vmalloc: Move draining areas out of caller
context") moved the purging from the vunmap() caller to a worker thread.
Unfortunately, set_iounmap_nonlazy() can cause the worker thread to spin
(possibly forever). For example, consider the following scenario:
1. Thread reads from /proc/vmcore. This eventually calls
__copy_oldmem_page() -> set_iounmap_nonlazy(), which sets
vmap_lazy_nr to lazy_max_pages() + 1.
2. Then it calls free_vmap_area_noflush() (via iounmap()), which adds 2
pages (one page plus the guard page) to the purge list and
vmap_lazy_nr. vmap_lazy_nr is now lazy_max_pages() + 3, so the
drain_vmap_work is scheduled.
3. Thread returns from the kernel and is scheduled out.
4. Worker thread is scheduled in and calls drain_vmap_area_work(). It
frees the 2 pages on the purge list. vmap_lazy_nr is now
lazy_max_pages() + 1.
5. This is still over the threshold, so it tries to purge areas again,
but doesn't find anything.
6. Repeat 5.
If the system is running with only one CPU (which is typicial for kdump)
and preemption is disabled, then this will never make forward progress:
there aren't any more pages to purge, so it hangs. If there is more
than one CPU or preemption is enabled, then the worker thread will spin
forever in the background. (Note that if there were already pages to be
purged at the time that set_iounmap_nonlazy() was called, this bug is
avoided.)
This can be reproduced with anything that reads from /proc/vmcore
multiple times. E.g., vmcore-dmesg /proc/vmcore.
It turns out that improvements to vmap() over the years have obsoleted
the need for this "optimization". I benchmarked `dd if=/proc/vmcore
of=/dev/null` with 4k and 1M read sizes on a system with a 32GB vmcore.
The test was run on 5.17, 5.18-rc1 with a fix that avoided the hang, and
5.18-rc1 with set_iounmap_nonlazy() removed entirely:
|5.17 |5.18+fix|5.18+removal
4k|40.86s| 40.09s| 26.73s
1M|24.47s| 23.98s| 21.84s
The removal was the fastest (by a wide margin with 4k reads). This
patch removes set_iounmap_nonlazy().
Link: https://lkml.kernel.org/r/52f819991051f9b865e9ce25605509bfdbacadcd.1649277321.git.osandov@fb.com
Fixes: 690467c81b ("mm/vmalloc: Move draining areas out of caller context")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
[*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557
[ bp: Drop unstable web link, massage heavily. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
Paolo reported that the instruction sequence that is used to replace:
call __static_call_return0
namely:
66 66 48 31 c0 data16 data16 xor %rax,%rax
decodes to something else on i386, namely:
66 66 48 data16 dec %ax
31 c0 xor %eax,%eax
Which is a nonsensical sequence that happens to have the same outcome.
*However* an important distinction is that it consists of 2
instructions which is a problem when the thing needs to be overwriten
with a regular call instruction again.
As such, replace the instruction with something that decodes the same
on both i386 and x86_64.
Fixes: 3f2a8fc4b1 ("static_call/x86: Add __static_call_return0()")
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220318204419.GT8939@worktop.programming.kicks-ass.net
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e8 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
Use the offset calculation to do the size calculation which avoids yet
another series of CPUID instructions for each invocation.
[ Fix the FP/SSE only case which missed to take the xstate
header into account, as
Reported-by: kernel test robot <oliver.sang@intel.com> ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/87o81pgbp2.ffs@tglx
The size calculation in __xstate_request_perm() fails to take supervisor
states into account because the permission bitmap is only relevant for user
states.
Up to 5.17 this does not matter because there are no supervisor states
supported, but the (re-)enabling of ENQCMD makes them available.
Fixes: 7c1ef59145 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.681768598@linutronix.de
So far the cached fixed compacted offsets worked, but with (re-)enabling
of ENQCMD this does no longer work with KVM fpstate.
KVM does not have supervisor features enabled for the guest FPU, which
means that KVM has then a different XSAVE area layout than the host FPU
state. This in turn breaks the copy from/to UABI functions when invoked for
a guest state.
Remove the pre-calculated compacted offsets and calculate the offset
of each component at runtime based on the XCOMP_BV field in the XSAVE
header.
The runtime overhead is not interesting because these copy from/to UABI
functions are not used in critical fast paths. KVM uses them to save and
restore FPU state during migration. The host uses them for ptrace and for
the slow path of 32bit signal handling.
Fixes: 7c1ef59145 ("x86/cpufeatures: Re-enable ENQCMD")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.627636809@linutronix.de
In preparation for runtime calculation of XSAVE offsets cache the feature
flags for each XSTATE component during feature enumeration via CPUID(0xD).
EDX has two relevant bits:
0 Supervisor component
1 Feature storage must be 64 byte aligned
These bits are currently only evaluated during init, but the alignment bit
must be cached to make runtime calculation of XSAVE offsets efficient.
Cache the full EDX content and use it for the existing alignment and
supervisor checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.573656209@linutronix.de
Reading XSTATE feature information from CPUID over and over does not make
sense. The information has to be cached anyway, so it can be done early.
Prepare for runtime calculation of XSTATE offsets and allow
consolidation of the size calculation functions in a later step.
Rename the function while at it as it does not setup any features.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.519411939@linutronix.de
fpu_copy_uabi_to_guest_fpstate() initializes the XCOMP_BV field in the
XSAVE header. That's a leftover from the old KVM FPU buffer handling code.
Since
d69c1382e1 ("x86/kvm: Convert FPU handling to a single swap buffer")
KVM uses the FPU core allocation code, which initializes the XCOMP_BV
field already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220324134623.408932232@linutronix.de
Currently arch_rethook_trampoline() generates an almost complete
pt_regs on-stack, everything except regs->ss that is, that currently
points to the fake return address, which is not a valid segment
descriptor.
Since interpretation of regs->[sb]p should be done in the context of
regs->ss, and we have code actually doing that (see
arch/x86/lib/insn-eval.c for instance), complete the job by also
pushing ss.
This ensures that anybody who does do look at regs->ss doesn't
mysteriously malfunction, avoiding much future pain.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/164826164851.2455864.17272661073069737350.stgit@devnote2
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups
and new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list (a
common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
dt-bindings: usb: mtk-xhci: add compatible for mt8186
usb: dwc3: Issue core soft reset before enabling run/stop
usb: gadget: Makefile: remove ccflags-y
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
usb: gadget: eliminate anonymous module_init & module_exit
usb: usbip: eliminate anonymous module_init & module_exit
xen/usb: harden xen_hcd against malicious backends
usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: ep_queue simplify isoc start condition
xen/usb: don't use arbitrary_virt_to_machine()
usb: isp1760: remove redundant max_packet() macro
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
usb: common: usb-conn-gpio: Make VBUS supply completely optional
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
usb: early: xhci-dbc: Fix xdbc number parsing
usb: early: xhci-dbc: Remove duplicate keep parsing
x86/tsc: Be consistent about use_tsc_delay()
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
...
Pull RAS updates from Borislav Petkov:
- More noinstr fixes
- Add an erratum workaround for Intel CPUs which, in certain
circumstances, end up consuming an unrelated uncorrectable memory
error when using fast string copy insns
- Remove the MCE tolerance level control as it is not really needed or
used anymore
* tag 'ras_core_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Remove the tolerance level control
x86/mce: Work around an erratum on fast string copy instructions
x86/mce: Use arch atomic and bit helpers
Merge yet more updates from Andrew Morton:
"This is the material which was staged after willystuff in linux-next.
Subsystems affected by this patch series: mm (debug, selftests,
pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise),
and selftests"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits)
selftests: kselftest framework: provide "finished" helper
mm: madvise: MADV_DONTNEED_LOCKED
mm: fix race between MADV_FREE reclaim and blkdev direct IO read
mm: generalize ARCH_HAS_FILTER_PGPROT
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
mm: warn on deleting redirtied only if accounted
mm/huge_memory: remove stale locking logic from __split_huge_pmd()
mm/huge_memory: remove stale page_trans_huge_mapcount()
mm/swapfile: remove stale reuse_swap_page()
mm/khugepaged: remove reuse_swap_page() usage
mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
mm: streamline COW logic in do_swap_page()
mm: slightly clarify KSM logic in do_swap_page()
mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
mm: optimize do_wp_page() for exclusive pages in the swapcache
mm/huge_memory: make is_transparent_hugepage() static
userfaultfd/selftests: enable hugetlb remap and remove event testing
selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
mm: enable MADV_DONTNEED for hugetlb mappings
kasan: disable LOCKDEP when printing reports
...
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
Merge more updates from Andrew Morton:
"Various misc subsystems, before getting into the post-linux-next
material.
41 patches.
Subsystems affected by this patch series: procfs, misc, core-kernel,
lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump,
taskstats, panic, kcov, resource, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
kernel/resource: fix kfree() of bootmem memory again
kcov: properly handle subsequent mmap calls
kcov: split ioctl handling into locked and unlocked parts
panic: move panic_print before kmsg dumpers
panic: add option to dump all CPUs backtraces in panic_print
docs: sysctl/kernel: add missing bit to panic_print
taskstats: remove unneeded dead assignment
kasan: no need to unset panic_on_warn in end_report()
ubsan: no need to unset panic_on_warn in ubsan_epilogue()
panic: unset panic_on_warn inside panic()
docs: kdump: add scp example to write out the dump file
docs: kdump: update description about sysfs file system support
arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible
cgroup: use irqsave in cgroup_rstat_flush_locked().
fat: use pointer to simple type in put_user()
minix: fix bug when opening a file with O_DIRECT
...
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
Pull hyperv updates from Wei Liu:
"Minor patches from various people"
* tag 'hyperv-next-signed-20220322' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Output host build info as normal Windows version number
hv_balloon: rate-limit "Unhandled message" warning
drivers: hv: log when enabling crash_kexec_post_notifiers
hv_utils: Add comment about max VMbus packet size in VSS driver
Drivers: hv: Compare cpumasks and not their weights in init_vp_index()
Drivers: hv: Rename 'alloced' to 'allocated'
Drivers: hv: vmbus: Use struct_size() helper in kmalloc()
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
Pull ACPI updates from Rafael Wysocki:
"From the new functionality perspective, the most significant items
here are the new driver for the 'ARM Generic Diagnostic Dump and
Reset' device, the extension of fine grain fan control in the ACPI fan
driver, and the change making it possible to use CPPC information to
obtain CPU capacity.
There are also a few new quirks, a bunch of fixes, including the
platform-level _OSC handling change to make it actually take the
platform firmware response into account, some code and documentation
cleanups, and a notable update of the ACPI device enumeration
documentation.
Specifics:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Use ida_alloc() instead of ida_simple_get() for ACPI enumeration of
devices (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
- Add power management debug messages related to suspend-to-idle in
two places (Rafael Wysocki).
- Fix __acpi_node_get_property_reference() return value and clean up
that function (Andy Shevchenko, Sakari Ailus).
- Fix return value of the __setup handler in the ACPI PM timer clock
source driver (Randy Dunlap).
- Clean up double words in two comments (Tom Rix).
- Add "skip i2c clients" quirks for Lenovo Yoga Tablet 1050F/L and
Nextbook Ares 8 (Hans de Goede).
- Clean up frequency invariance handling on x86 in the ACPI CPPC
library (Huang Rui).
- Work around broken XSDT on the Advantech DAC-BJ01 board (Mark
Cilissen).
- Make wakeup events checks in the ACPI EC driver more
straightforward and clean up acpi_ec_submit_event() (Rafael
Wysocki).
- Make it possible to obtain the CPU capacity with the help of CPPC
information (Ionela Voinescu).
- Improve fine grained fan control in the ACPI fan driver and
document it (Srinivas Pandruvada).
- Add device HID and quirk for Microsoft Surface Go 3 to the ACPI
battery driver (Maximilian Luz).
- Make the ACPI driver for Intel SoCs (LPSS) let the SPI driver know
the exact type of the controller (Andy Shevchenko).
- Force native backlight mode on Clevo NL5xRU and NL5xNU (Werner
Sembach).
- Fix return value of __setup handlers in the APEI code (Randy
Dunlap).
- Add Arm Generic Diagnostic Dump and Reset device driver (Ilkka
Koskinen).
- Limit printable size of BERT table data (Darren Hart).
- Fix up HEST and GHES initialization (Shuai Xue).
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko)"
* tag 'acpi-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
clocksource: acpi_pm: fix return value of __setup handler
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU
arm64, topology: enable use of init_cpu_capacity_cppc()
arch_topology: obtain cpu capacity using information from CPPC
x86, ACPI: rename init_freq_invariance_cppc() to arch_init_invariance_cppc()
ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
ACPI: tables: Add AGDI to the list of known table signatures
ACPI/APEI: Limit printable size of BERT table data
ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
ACPI / x86: Work around broken XSDT on Advantech DAC-BJ01 board
ACPI: APEI: fix return value of __setup handlers
x86/ACPI: CPPC: Move init_freq_invariance_cppc() into x86 CPPC
x86: Expose init_freq_invariance() to topology header
x86/ACPI: CPPC: Move AMD maximum frequency ratio setting function into x86 CPPC
x86/ACPI: CPPC: Rename cppc_msr.c to cppc.c
ACPI / x86: Add skip i2c clients quirk for Lenovo Yoga Tablet 1050F/L
ACPI / x86: Add skip i2c clients quirk for Nextbook Ares 8
ACPICA: Avoid walking the ACPI Namespace if it is not there
...
Pull x86 PASID support from Thomas Gleixner:
"Reenable ENQCMD/PASID support:
- Simplify the PASID handling to allocate the PASID once, associate
it to the mm of a process and free it on mm_exit().
The previous attempt of refcounted PASIDs and dynamic
alloc()/free() turned out to be error prone and too complex. The
PASID space is 20bits, so the case of resource exhaustion is a pure
academic concern.
- Populate the PASID MSR on demand via #GP to avoid racy updates via
IPIs.
- Reenable ENQCMD and let objtool check for the forbidden usage of
ENQCMD in the kernel.
- Update the documentation for Shared Virtual Addressing accordingly"
* tag 'x86-pasid-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Update documentation for SVA (Shared Virtual Addressing)
tools/objtool: Check for use of the ENQCMD instruction in the kernel
x86/cpufeatures: Re-enable ENQCMD
x86/traps: Demand-populate PASID MSR via #GP
sched: Define and initialize a flag to identify valid PASID in the task
x86/fpu: Clear PASID when copying fpstate
iommu/sva: Assign a PASID to mm on PASID allocation and free it on mm exit
kernel/fork: Initialize mm's PASID
iommu/ioasid: Introduce a helper to check for valid PASIDs
mm: Change CONFIG option for mm->pasid field
iommu/sva: Rename CONFIG_IOMMU_SVA_LIB to CONFIG_IOMMU_SVA
Pull x86 cleanups from Borislav Petkov:
- Remove a misleading message and an unused function
* tag 'x86_cleanups_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Remove the 'strange power saving mode' hint from unknown NMI handler
x86/pat: Remove the unused set_pages_array_wt() function
Pull x86 confidential computing updates from Borislav Petkov:
- Add shared confidential computing code which will be used by both
vendors instead of proliferating home-grown solutions for
technologies (SEV/SNP and TDX) which are pretty similar
* tag 'x86_cc_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/cpa: Generalize __set_memory_enc_pgtable()
x86/coco: Add API to handle encryption mask
x86/coco: Explicitly declare type of confidential computing platform
x86/cc: Move arch/x86/{kernel/cc_platform.c => coco/core.c}
Pull x86 SEV fix from Borislav Petkov:
- Add a missing function section annotation
* tag 'x86_sev_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head64: Add missing __head annotation to sme_postprocess_startup()
Pull x86 cpu feature updates from Borislav Petkov:
- Merge the AMD and Intel PPIN code into a shared one by both vendors.
Add the PPIN number to sysfs so that sockets can be identified when
replacement is needed
- Minor fixes and cleanups
* tag 'x86_cpu_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Clear SME feature flag when not in use
x86/cpufeatures: Put the AMX macros in the word 18 block
topology/sysfs: Add PPIN in sysfs under cpu topology
topology/sysfs: Add format parameter to macro defining "show" functions for proc
x86/cpu: Read/save PPIN MSR during initialization
x86/cpu: X86_FEATURE_INTEL_PPIN finally has a CPUID bit
x86/cpu: Merge Intel and AMD ppin_init() functions
x86/CPU/AMD: Use default_groups in kobj_type
Merge changes related to system sleep, PM domains changes and power
management documentation changes for 5.18-rc1:
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
* pm-sleep:
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
PM: sleep: Add device name to suspend_report_result()
PM: suspend: fix return value of __setup handler
PM: hibernate: fix __setup handler error handling
PM: hibernate: Clean up non-kernel-doc comments
PM: sleep: wakeup: Fix typos in comments
PM: hibernate: fix load_image_and_restore() error path
* pm-domains:
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
PM: domains: use dev_err_probe() to simplify error handling
PM: domains: Prevent power off for parent unless child is in deepest state
* pm-docs:
Documentation: admin-guide: pm: Document uncore frequency scaling
