Commit Graph

1560 Commits

Author SHA1 Message Date
David S. Miller
2a171788ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Files removed in 'net-next' had their license header updated
in 'net'.  We take the remove from 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04 09:26:51 +09:00
Linus Torvalds
ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Wei Yongjun
dc82673f0c sctp: fix error return code in sctp_send_add_streams()
Fix to returnerror code -ENOMEM from the sctp_make_strreset_addstrm()
error handling case instead of 0. 'retval' can be overwritten to 0 after
call sctp_stream_alloc_out().

Fixes: e090abd0d8 ("sctp: factor out stream->out allocation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01 21:24:41 +09:00
David S. Miller
e1ea2f9856 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several conflicts here.

NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.

Parallel additions to net/pkt_cls.h and net/sch_generic.h

A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.

The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-30 21:09:24 +09:00
Xin Long
978aa04741 sctp: fix some type cast warnings introduced since very beginning
These warnings were found by running 'make C=2 M=net/sctp/'.
They are there since very beginning.

Note after this patch, there still one warning left in
sctp_outq_flush():
  sctp_chunk_fail(chunk, SCTP_ERROR_INV_STRM)

Since it has been moved to sctp_stream_outq_migrate on net-next,
to avoid the extra job when merging net-next to net, I will post
the fix for it after the merging is done.

Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 18:03:24 +09:00
Xin Long
f6fc6bc0b8 sctp: fix a type cast warnings that causes a_rwnd gets the wrong value
These warnings were found by running 'make C=2 M=net/sctp/'.

Commit d4d6fb5787 ("sctp: Try not to change a_rwnd when faking a
SACK from SHUTDOWN.") expected to use the peers old rwnd and add
our flight size to the a_rwnd. But with the wrong Endian, it may
not work as well as expected.

So fix it by converting to the right value.

Fixes: d4d6fb5787 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 18:03:24 +09:00
Xin Long
8d32503efd sctp: fix some type cast warnings introduced by transport rhashtable
These warnings were found by running 'make C=2 M=net/sctp/'.

They are introduced by not aware of Endian for the port when
coding transport rhashtable patches.

Fixes: 7fda702f93 ("sctp: use new rhlist interface on sctp transport rhashtable")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 18:03:24 +09:00
Xin Long
1da4fc97cb sctp: fix some type cast warnings introduced by stream reconf
These warnings were found by running 'make C=2 M=net/sctp/'.

They are introduced by not aware of Endian when coding stream
reconf patches.

Since commit c0d8bab6ae ("sctp: add get and set sockopt for
reconf_enable") enabled stream reconf feature for users, the
Fixes tag below would use it.

Fixes: c0d8bab6ae ("sctp: add get and set sockopt for reconf_enable")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 18:03:24 +09:00
Xin Long
d04adf1b35 sctp: reset owner sk for data chunks on out queues when migrating a sock
Now when migrating sock to another one in sctp_sock_migrate(), it only
resets owner sk for the data in receive queues, not the chunks on out
queues.

It would cause that data chunks length on the sock is not consistent
with sk sk_wmem_alloc. When closing the sock or freeing these chunks,
the old sk would never be freed, and the new sock may crash due to
the overflow sk_wmem_alloc.

syzbot found this issue with this series:

  r0 = socket$inet_sctp()
  sendto$inet(r0)
  listen(r0)
  accept4(r0)
  close(r0)

Although listen() should have returned error when one TCP-style socket
is in connecting (I may fix this one in another patch), it could also
be reproduced by peeling off an assoc.

This issue is there since very beginning.

This patch is to reset owner sk for the chunks on out queues so that
sk sk_wmem_alloc has correct value after accept one sock or peeloff
an assoc to one sock.

Note that when resetting owner sk for chunks on outqueue, it has to
sctp_clear_owner_w/skb_orphan chunks before changing assoc->base.sk
first and then sctp_set_owner_w them after changing assoc->base.sk,
due to that sctp_wfree and it's callees are using assoc->base.sk.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 12:06:57 +09:00
Kees Cook
9c3b575183 net: sctp: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-sctp@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25 12:02:09 +09:00
Laszlo Toth
b71d21c274 sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND
Commit 9b97420228 ("sctp: support ipv6 nonlocal bind")
introduced support for the above options as v4 sctp did,
so patched sctp_v6_available().

In the v4 implementation it's enough, because
sctp_inet_bind_verify() just returns with sctp_v4_available().
However sctp_inet6_bind_verify() has an extra check before that
for link-local scope_id, which won't respect the above options.

Added the checks before calling ipv6_chk_addr(), but
not before the validation of scope_id.

before (w/ both options):
 ./v6test fe80::10 sctp
 bind failed, errno: 99 (Cannot assign requested address)
 ./v6test fe80::10 tcp
 bind success, errno: 0 (Success)

after (w/ both options):
 ./v6test fe80::10 sctp
 bind success, errno: 0 (Success)

Signed-off-by: Laszlo Toth <laszlth@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-24 18:39:46 +09:00
David S. Miller
f8ddadc4db Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
There were quite a few overlapping sets of changes here.

Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.

Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly.  If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.

In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().

Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.

The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 13:39:14 +01:00
Xin Long
1cc276cec9 sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
Now sctp processes icmp redirect packet in sctp_icmp_redirect where
it calls sctp_transport_dst_check in which tp->dst can be released.

The problem is before calling sctp_transport_dst_check, it doesn't
check sock_owned_by_user, which means tp->dst could be freed while
a process is accessing it with owning the socket.

An use-after-free issue could be triggered by this.

This patch is to fix it by checking sock_owned_by_user before calling
sctp_transport_dst_check in sctp_icmp_redirect, so that it would not
release tp->dst if users still hold sock lock.

Besides, the same issue fixed in commit 45caeaa5ac ("dccp/tcp: fix
routing redirect race") on sctp also needs this check.

Fixes: 55be7a9c60 ("ipv4: Add redirect support to all protocol icmp error handlers")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20 12:53:45 +01:00
Xin Long
df80cd9b28 sctp: do not peel off an assoc from one netns to another one
Now when peeling off an association to the sock in another netns, all
transports in this assoc are not to be rehashed and keep use the old
key in hashtable.

As a transport uses sk->net as the hash key to insert into hashtable,
it would miss removing these transports from hashtable due to the new
netns when closing the sock and all transports are being freeed, then
later an use-after-free issue could be caused when looking up an asoc
and dereferencing those transports.

This is a very old issue since very beginning, ChunYu found it with
syzkaller fuzz testing with this series:

  socket$inet6_sctp()
  bind$inet6()
  sendto$inet6()
  unshare(0x40000000)
  getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST()
  getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF()

This patch is to block this call when peeling one assoc off from one
netns to another one, so that the netns of all transport would not
go out-sync with the key in hashtable.

Note that this patch didn't fix it by rehashing transports, as it's
difficult to handle the situation when the tuple is already in use
in the new netns. Besides, no one would like to peel off one assoc
to another netns, considering ipaddrs, ifaces, etc. are usually
different.

Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19 13:16:07 +01:00
Colin Ian King
1a37b770cf sctp: make array sctp_sched_ops static
The array sctp_sched_ops  is local to the source and
does not need to be in global scope, so make it static.

Cleans up sparse warning:
symbol 'sctp_sched_ops' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11 20:18:25 -07:00
David S. Miller
53954cf8c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 18:19:22 -07:00
Marcelo Ricardo Leitner
ac1ed8b82c sctp: introduce round robin stream scheduler
This patch introduces RFC Draft ndata section 3.2 Priority Based
Scheduler (SCTP_SS_RR).

Works by maintaining a list of enqueued streams and tracking the last
one used to send data. When the datamsg is done, it switches to the next
stream.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
637784ade2 sctp: introduce priority based stream scheduler
This patch introduces RFC Draft ndata section 3.4 Priority Based
Scheduler (SCTP_SS_PRIO).

It works by having a struct sctp_stream_priority for each priority
configured. This struct is then enlisted on a queue ordered per priority
if, and only if, there is a stream with data queued, so that dequeueing
is very straightforward: either finish current datamsg or simply dequeue
from the highest priority queued, which is the next stream pointed, and
that's it.

If there are multiple streams assigned with the same priority and with
data queued, it will do round robin amongst them while respecting
datamsgs boundaries (when not using idata chunks), to be reasonably
fair.

We intentionally don't maintain a list of priorities nor a list of all
streams with the same priority to save memory. The first would mean at
least 2 other pointers per priority (which, for 1000 priorities, that
can mean 16kB) and the second would also mean 2 other pointers but per
stream. As SCTP supports up to 65535 streams on a given asoc, that's
1MB. This impacts when giving a priority to some stream, as we have to
find out if the new priority is already being used and if we can free
the old one, and also when tearing down.

The new fields in struct sctp_stream_out_ext and sctp_stream are added
under a union because that memory is to be shared with other schedulers.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
0ccdf3c7fd sctp: add sockopt to get/set stream scheduler parameters
As defined per RFC Draft ndata Section 4.3.3, named as
SCTP_STREAM_SCHEDULER_VALUE.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
13aa8770fe sctp: add sockopt to get/set stream scheduler
As defined per RFC Draft ndata Section 4.3.2, named as
SCTP_STREAM_SCHEDULER.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
5bbbbe32a4 sctp: introduce stream scheduler foundations
This patch introduces the hooks necessary to do stream scheduling, as
per RFC Draft ndata.  It also introduces the first scheduler, which is
what we do today but now factored out: first come first served (FCFS).

With stream scheduling now we have to track which chunk was enqueued on
which stream and be able to select another other than the in front of
the main outqueue. So we introduce a list on sctp_stream_out_ext
structure for this purpose.

We reuse sctp_chunk->transmitted_list space for the list above, as the
chunk cannot belong to the two lists at the same time. By using the
union in there, we can have distinct names for these moments.

sctp_sched_ops are the operations expected to be implemented by each
scheduler. The dequeueing is a bit particular to this implementation but
it is to match how we dequeue packets today. We first dequeue and then
check if it fits the packet and if not, we requeue it at head. Thus why
we don't have a peek operation but have dequeue_done instead, which is
called once the chunk can be safely considered as transmitted.

The check removed from sctp_outq_flush is now performed by
sctp_stream_outq_migrate, which is only called during assoc setup.
(sctp_sendmsg() also checks for it)

The only operation that is foreseen but not yet added here is a way to
signalize that a new packet is starting or that the packet is done, for
round robin scheduler per packet, but is intentionally left to the
patch that actually implements it.

Support for I-DATA chunks, also described in this RFC, with user message
interleaving is straightforward as it just requires the schedulers to
probe for the feature and ignore datamsg boundaries when dequeueing.

See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-sctp-ndata-13
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:29 -07:00
Marcelo Ricardo Leitner
f952be79ce sctp: introduce struct sctp_stream_out_ext
With the stream schedulers, sctp_stream_out will become too big to be
allocated by kmalloc and as we need to allocate with BH disabled, we
cannot use __vmalloc in sctp_stream_init().

This patch moves out the stats from sctp_stream_out to
sctp_stream_out_ext, which will be allocated only when the application
tries to sendmsg something on it.

Just the introduction of sctp_stream_out_ext would already fix the issue
described above by splitting the allocation in two. Moving the stats
to it also reduces the pressure on the allocator as we will ask for less
memory atomically when creating the socket and we will use GFP_KERNEL
later.

Then, for stream schedulers, we will just use sctp_stream_out_ext.

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Marcelo Ricardo Leitner
1fdb8d8fef sctp: factor out stream->in allocation
There is 1 place allocating it and another reallocating. Move such
procedures to a common function.

v2: updated changelog

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Marcelo Ricardo Leitner
e090abd0d8 sctp: factor out stream->out allocation
There is 1 place allocating it and 2 other reallocating. Move such
procedures to a common function.

Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Marcelo Ricardo Leitner
1ae2eaaa22 sctp: silence warns on sctp_stream_init allocations
As SCTP supports up to 65535 streams, that can lead to very large
allocations in sctp_stream_init(). As Xin Long noticed, systems with
small amounts of memory are more prone to not have enough memory and
dump warnings on dmesg initiated by user actions. Thus, silence them.

Also, if the reallocation of stream->out is not necessary, skip it and
keep the memory we already have.

Reported-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03 16:27:28 -07:00
Dan Carpenter
c2cc187e53 sctp: Fix a big endian bug in sctp_diag_dump()
The sctp_for_each_transport() function takes an pointer to int.  The
cb->args[] array holds longs so it's only using the high 32 bits.  It
works on little endian system but will break on big endian 64 bit
machines.

Fixes: d25adbeb0c ("sctp: fix an use-after-free issue in sctp_sock_dump")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 21:16:29 -07:00
Xin Long
8c7c19a55e sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill
returns err, in which case it shouldn't mark sk dumped by setting
cb->args[3] as 1 in sctp_sock_dump().

Otherwise, it could cause some asocs to have no parent's sk dumped
in 'ss --sctp'.

So this patch is to not set cb->args[3] when inet_sctp_diag_fill()
returns err in sctp_sock_dump().

Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15 14:51:15 -07:00
Xin Long
d25adbeb0c sctp: fix an use-after-free issue in sctp_sock_dump
Commit 86fdb3448c ("sctp: ensure ep is not destroyed before doing the
dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep
with holding sock and sock lock.

But Paolo noticed that endpoint could be destroyed in sctp_rcv without
sock lock protection. It means the use-after-free issue still could be
triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks
!ep, although it's pretty hard to reproduce.

I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close
and sctp_sock_dump long time.

This patch is to add another param cb_done to sctp_for_each_transport
and dump ep->assocs with holding tsp after jumping out of transport's
traversal in it to avoid this issue.

It can also improve sctp diag dump to make it run faster, as no need
to save sk into cb->args[5] and keep calling sctp_for_each_transport
any more.

This patch is also to use int * instead of int for the pos argument
in sctp_for_each_transport, which could make postion increment only
in sctp_for_each_transport and no need to keep changing cb->args[2]
in sctp_sock_filter and sctp_sock_dump any more.

Fixes: 86fdb3448c ("sctp: ensure ep is not destroyed before doing the dump")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15 14:47:49 -07:00
Marcelo Ricardo Leitner
7906b00f5c sctp: fix missing wake ups in some situations
Commit fb586f2530 ("sctp: delay calls to sk_data_ready() as much as
possible") minimized the number of wake ups that are triggered in case
the association receives a packet with multiple data chunks on it and/or
when io_events are enabled and then commit 0970f5b366 ("sctp: signal
sk_data_ready earlier on data chunks reception") moved the wake up to as
soon as possible. It thus relies on the state machine running later to
clean the flag that the event was already generated.

The issue is that there are 2 call paths that calls
sctp_ulpq_tail_event() outside of the state machine, causing the flag to
linger and possibly omitting a needed wake up in the sequence.

One of the call paths is when enabling SCTP_SENDER_DRY_EVENTS via
setsockopt(SCTP_EVENTS), as noticed by Harald Welte. The other is when
partial reliability triggers removal of chunks from the send queue when
the application calls sendmsg().

This commit fixes it by not setting the flag in case the socket is not
owned by the user, as it won't be cleaned later. This works for
user-initiated calls and also for rx path processing.

Fixes: fb586f2530 ("sctp: delay calls to sk_data_ready() as much as possible")
Reported-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08 10:02:47 -07:00
David S. Miller
6026e043d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 17:42:05 -07:00
Stefano Brivio
ee6c88bb75 sctp: Avoid out-of-bounds reads from address storage
inet_diag_msg_sctp{,l}addr_fill() and sctp_get_sctp_info() copy
sizeof(sockaddr_storage) bytes to fill in sockaddr structs used
to export diagnostic information to userspace.

However, the memory allocated to store sockaddr information is
smaller than that and depends on the address family, so we leak
up to 100 uninitialized bytes to userspace. Just use the size of
the source structs instead, in all the three cases this is what
userspace expects. Zero out the remaining memory.

Unused bytes (i.e. when IPv4 addresses are used) in source
structs sctp_sockaddr_entry and sctp_transport are already
cleared by sctp_add_bind_addr() and sctp_transport_new(),
respectively.

Noticed while testing KASAN-enabled kernel with 'ss':

[ 2326.885243] BUG: KASAN: slab-out-of-bounds in inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag] at addr ffff881be8779800
[ 2326.896800] Read of size 128 by task ss/9527
[ 2326.901564] CPU: 0 PID: 9527 Comm: ss Not tainted 4.11.0-22.el7a.x86_64 #1
[ 2326.909236] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
[ 2326.917585] Call Trace:
[ 2326.920312]  dump_stack+0x63/0x8d
[ 2326.924014]  kasan_object_err+0x21/0x70
[ 2326.928295]  kasan_report+0x288/0x540
[ 2326.932380]  ? inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.938500]  ? skb_put+0x8b/0xd0
[ 2326.942098]  ? memset+0x31/0x40
[ 2326.945599]  check_memory_region+0x13c/0x1a0
[ 2326.950362]  memcpy+0x23/0x50
[ 2326.953669]  inet_sctp_diag_fill+0x42c/0x6c0 [sctp_diag]
[ 2326.959596]  ? inet_diag_msg_sctpasoc_fill+0x460/0x460 [sctp_diag]
[ 2326.966495]  ? __lock_sock+0x102/0x150
[ 2326.970671]  ? sock_def_wakeup+0x60/0x60
[ 2326.975048]  ? remove_wait_queue+0xc0/0xc0
[ 2326.979619]  sctp_diag_dump+0x44a/0x760 [sctp_diag]
[ 2326.985063]  ? sctp_ep_dump+0x280/0x280 [sctp_diag]
[ 2326.990504]  ? memset+0x31/0x40
[ 2326.994007]  ? mutex_lock+0x12/0x40
[ 2326.997900]  __inet_diag_dump+0x57/0xb0 [inet_diag]
[ 2327.003340]  ? __sys_sendmsg+0x150/0x150
[ 2327.007715]  inet_diag_dump+0x4d/0x80 [inet_diag]
[ 2327.012979]  netlink_dump+0x1e6/0x490
[ 2327.017064]  __netlink_dump_start+0x28e/0x2c0
[ 2327.021924]  inet_diag_handler_cmd+0x189/0x1a0 [inet_diag]
[ 2327.028045]  ? inet_diag_rcv_msg_compat+0x1b0/0x1b0 [inet_diag]
[ 2327.034651]  ? inet_diag_dump_compat+0x190/0x190 [inet_diag]
[ 2327.040965]  ? __netlink_lookup+0x1b9/0x260
[ 2327.045631]  sock_diag_rcv_msg+0x18b/0x1e0
[ 2327.050199]  netlink_rcv_skb+0x14b/0x180
[ 2327.054574]  ? sock_diag_bind+0x60/0x60
[ 2327.058850]  sock_diag_rcv+0x28/0x40
[ 2327.062837]  netlink_unicast+0x2e7/0x3b0
[ 2327.067212]  ? netlink_attachskb+0x330/0x330
[ 2327.071975]  ? kasan_check_write+0x14/0x20
[ 2327.076544]  netlink_sendmsg+0x5be/0x730
[ 2327.080918]  ? netlink_unicast+0x3b0/0x3b0
[ 2327.085486]  ? kasan_check_write+0x14/0x20
[ 2327.090057]  ? selinux_socket_sendmsg+0x24/0x30
[ 2327.095109]  ? netlink_unicast+0x3b0/0x3b0
[ 2327.099678]  sock_sendmsg+0x74/0x80
[ 2327.103567]  ___sys_sendmsg+0x520/0x530
[ 2327.107844]  ? __get_locked_pte+0x178/0x200
[ 2327.112510]  ? copy_msghdr_from_user+0x270/0x270
[ 2327.117660]  ? vm_insert_page+0x360/0x360
[ 2327.122133]  ? vm_insert_pfn_prot+0xb4/0x150
[ 2327.126895]  ? vm_insert_pfn+0x32/0x40
[ 2327.131077]  ? vvar_fault+0x71/0xd0
[ 2327.134968]  ? special_mapping_fault+0x69/0x110
[ 2327.140022]  ? __do_fault+0x42/0x120
[ 2327.144008]  ? __handle_mm_fault+0x1062/0x17a0
[ 2327.148965]  ? __fget_light+0xa7/0xc0
[ 2327.153049]  __sys_sendmsg+0xcb/0x150
[ 2327.157133]  ? __sys_sendmsg+0xcb/0x150
[ 2327.161409]  ? SyS_shutdown+0x140/0x140
[ 2327.165688]  ? exit_to_usermode_loop+0xd0/0xd0
[ 2327.170646]  ? __do_page_fault+0x55d/0x620
[ 2327.175216]  ? __sys_sendmsg+0x150/0x150
[ 2327.179591]  SyS_sendmsg+0x12/0x20
[ 2327.183384]  do_syscall_64+0xe3/0x230
[ 2327.187471]  entry_SYSCALL64_slow_path+0x25/0x25
[ 2327.192622] RIP: 0033:0x7f41d18fa3b0
[ 2327.196608] RSP: 002b:00007ffc3b731218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 2327.205055] RAX: ffffffffffffffda RBX: 00007ffc3b731380 RCX: 00007f41d18fa3b0
[ 2327.213017] RDX: 0000000000000000 RSI: 00007ffc3b731340 RDI: 0000000000000003
[ 2327.220978] RBP: 0000000000000002 R08: 0000000000000004 R09: 0000000000000040
[ 2327.228939] R10: 00007ffc3b730f30 R11: 0000000000000246 R12: 0000000000000003
[ 2327.236901] R13: 00007ffc3b731340 R14: 00007ffc3b7313d0 R15: 0000000000000084
[ 2327.244865] Object at ffff881be87797e0, in cache kmalloc-64 size: 64
[ 2327.251953] Allocated:
[ 2327.254581] PID = 9484
[ 2327.257215]  save_stack_trace+0x1b/0x20
[ 2327.261485]  save_stack+0x46/0xd0
[ 2327.265179]  kasan_kmalloc+0xad/0xe0
[ 2327.269165]  kmem_cache_alloc_trace+0xe6/0x1d0
[ 2327.274138]  sctp_add_bind_addr+0x58/0x180 [sctp]
[ 2327.279400]  sctp_do_bind+0x208/0x310 [sctp]
[ 2327.284176]  sctp_bind+0x61/0xa0 [sctp]
[ 2327.288455]  inet_bind+0x5f/0x3a0
[ 2327.292151]  SYSC_bind+0x1a4/0x1e0
[ 2327.295944]  SyS_bind+0xe/0x10
[ 2327.299349]  do_syscall_64+0xe3/0x230
[ 2327.303433]  return_from_SYSCALL_64+0x0/0x6a
[ 2327.308194] Freed:
[ 2327.310434] PID = 4131
[ 2327.313065]  save_stack_trace+0x1b/0x20
[ 2327.317344]  save_stack+0x46/0xd0
[ 2327.321040]  kasan_slab_free+0x73/0xc0
[ 2327.325220]  kfree+0x96/0x1a0
[ 2327.328530]  dynamic_kobj_release+0x15/0x40
[ 2327.333195]  kobject_release+0x99/0x1e0
[ 2327.337472]  kobject_put+0x38/0x70
[ 2327.341266]  free_notes_attrs+0x66/0x80
[ 2327.345545]  mod_sysfs_teardown+0x1a5/0x270
[ 2327.350211]  free_module+0x20/0x2a0
[ 2327.354099]  SyS_delete_module+0x2cb/0x2f0
[ 2327.358667]  do_syscall_64+0xe3/0x230
[ 2327.362750]  return_from_SYSCALL_64+0x0/0x6a
[ 2327.367510] Memory state around the buggy address:
[ 2327.372855]  ffff881be8779700: fc fc fc fc 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2327.380914]  ffff881be8779780: fb fb fb fb fb fb fb fb fc fc fc fc 00 00 00 00
[ 2327.388972] >ffff881be8779800: 00 00 00 00 fc fc fc fc fb fb fb fb fb fb fb fb
[ 2327.397031]                                ^
[ 2327.401792]  ffff881be8779880: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[ 2327.409850]  ffff881be8779900: 00 00 00 00 00 04 fc fc fc fc fc fc 00 00 00 00
[ 2327.417907] ==================================================================

This fixes CVE-2017-7558.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1480266
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23 22:35:15 -07:00
David S. Miller
e2a7c34fb2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-08-21 17:06:42 -07:00
Alexander Potapenko
15339e441e sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and
sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below).
Make sure all fields of an IPv6 address are initialized, which
guarantees that the IPv4 fields are also initialized.

==================================================================
 BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
 net/sctp/ipv6.c:517
 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
 01/01/2011
 Call Trace:
  dump_stack+0x172/0x1c0 lib/dump_stack.c:42
  is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
  kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
  native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
  arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
  arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
  __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
  sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
  sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
  sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
  sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
  inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
  sock_sendmsg_nosec net/socket.c:633 [inline]
  sock_sendmsg net/socket.c:643 [inline]
  SYSC_sendto+0x608/0x710 net/socket.c:1696
  SyS_sendto+0x8a/0xb0 net/socket.c:1664
  entry_SYSCALL_64_fastpath+0x13/0x94
 RIP: 0033:0x44b479
 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
 R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
 R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
 origin description: ----dst_saddr@sctp_v6_get_dst
 local variable created at:
  sk_fullsock include/net/sock.h:2321 [inline]
  inet6_sk include/linux/ipv6.h:309 [inline]
  sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
==================================================================
 BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0
 net/sctp/ipv6.c:517
 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
 01/01/2011
 Call Trace:
  dump_stack+0x172/0x1c0 lib/dump_stack.c:42
  is_logbuf_locked mm/kmsan/kmsan.c:59 [inline]
  kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938
  native_save_fl arch/x86/include/asm/irqflags.h:18 [inline]
  arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline]
  arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline]
  __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467
  sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517
  sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
  sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651
  sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871
  inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
  sock_sendmsg_nosec net/socket.c:633 [inline]
  sock_sendmsg net/socket.c:643 [inline]
  SYSC_sendto+0x608/0x710 net/socket.c:1696
  SyS_sendto+0x8a/0xb0 net/socket.c:1664
  entry_SYSCALL_64_fastpath+0x13/0x94
 RIP: 0033:0x44b479
 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479
 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006
 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c
 R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff
 R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000
 origin description: ----dst_saddr@sctp_v6_get_dst
 local variable created at:
  sk_fullsock include/net/sock.h:2321 [inline]
  inet6_sk include/linux/ipv6.h:309 [inline]
  sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241
  sctp_transport_route+0x101/0x570 net/sctp/transport.c:292
==================================================================

Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:00:47 -07:00
Xin Long
327c0dab8d sctp: fix some indents in sm_make_chunk.c
There are some bad indents of functions' defination in sm_make_chunk.c.
They have been there since beginning, it was probably caused by that
the typedef sctp_chunk_t was replaced with struct sctp_chunk.

So it's the best time to fix them in this patchset, it's also to fix
some bad indents in other functions' defination in sm_make_chunk.c.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
172a1599ba sctp: remove the typedef sctp_disposition_t
This patch is to remove the typedef sctp_disposition_t, and
replace with enum sctp_disposition in the places where it's
using this typedef.

It's also to fix the indent for many functions' defination.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
8ee821aea3 sctp: remove the typedef sctp_sm_table_entry_t
This patch is to remove the typedef sctp_sm_table_entry_t, and
replace with struct sctp_sm_table_entry in the places where it's
using this typedef.

It is also to fix some indents.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
e08af95df1 sctp: remove the typedef sctp_verb_t
This patch is to remove the typedef sctp_verb_t, and
replace with enum sctp_verb in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
c488b7704e sctp: remove the typedef sctp_arg_t
This patch is to remove the typedef sctp_arg_t, and
replace with union sctp_arg in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
a85bbeb221 sctp: remove the typedef sctp_cmd_seq_t
This patch is to remove the typedef sctp_cmd_seq_t, and
replace with struct sctp_cmd_seq in the places where it's
using this typedef.

Note that it doesn't fix many indents although it should,
as sctp_disposition_t's removal would mess them up again.
So better to fix them when removing sctp_disposition_t in
the later patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
e2c3108ab2 sctp: remove the typedef sctp_cmd_t
This patch is to remove the typedef sctp_cmd_t, and
replace with enum sctp_cmd in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
b7ef2618a0 sctp: remove the typedef sctp_socket_type_t
This patch is to remove the typedef sctp_socket_type_t, and
replace with enum sctp_socket_type in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:44 -07:00
Xin Long
d38ef5ae35 sctp: remove the typedef sctp_dbg_objcnt_entry_t
This patch is to remove the typedef sctp_dbg_objcnt_entry_t, and
replace with struct sctp_dbg_objcnt_entry in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:43 -07:00
Xin Long
a05437ac5d sctp: remove the typedef sctp_cmsgs_t
This patch is to remove the typedef sctp_cmsgs_t, and
replace with struct sctp_cmsgs in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:43 -07:00
Xin Long
edf903f83e sctp: remove the typedef sctp_sender_hb_info_t
This patch is to remove the typedef sctp_sender_hb_info_t, and
replace with struct sctp_sender_hb_info in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 10:02:43 -07:00
Xin Long
bfc6f8270f sctp: remove the typedef sctp_subtype_t
This patch is to remove the typedef sctp_subtype_t, and
replace with union sctp_subtype in the places where it's
using this typedef.

Note that it doesn't fix many indents although it should,
as sctp_disposition_t's removal would mess them up again.
So better to fix them when removing sctp_disposition_t in
later patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:33:42 -07:00
Xin Long
61f0eb0722 sctp: remove the typedef sctp_event_t
This patch is to remove the typedef sctp_event_t, and
replace with enum sctp_event in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:33:42 -07:00
Xin Long
19cd1592a2 sctp: remove the typedef sctp_event_timeout_t
This patch is to remove the typedef sctp_event_timeout_t, and
replace with enum sctp_event_timeout in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:33:42 -07:00
Xin Long
5210601945 sctp: remove the typedef sctp_state_t
This patch is to remove the typedef sctp_state_t, and
replace with enum sctp_state in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:33:42 -07:00
Xin Long
4785c7ae18 sctp: remove the typedef sctp_ierror_t
This patch is to remove the typedef sctp_ierror_t, and
replace with enum sctp_ierror in the places where it's
using this typedef.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:33:42 -07:00