Commit Graph

217 Commits

Author SHA1 Message Date
Stephen Rothwell
8cef9c6735 v9fs: fixup for inode_setattr being removed
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-11 00:08:00 -04:00
Linus Torvalds
5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Al Viro
b57922d97f convert remaining ->clear_inode() to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:37 -04:00
Christoph Hellwig
1025774ce4 remove inode_setattr
Replace inode_setattr with opencoded variants of it in all callers.  This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

 spufs: explicitly checks for ATTR_SIZE earlier
 btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
 ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:37 -04:00
Eric Van Hensbergen
327aec03ac 9p: fix sparse warnings in new xattr code
fixes:

  CHECK   fs/9p/xattr.c
	fs/9p/xattr.c:73:6: warning: Using plain integer as NULL pointer
	fs/9p/xattr.c:135:6: warning: Using plain integer as NULL pointer

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:38 -05:00
Eric Van Hensbergen
ea1375333e fs/9p: remove sparse warning in vfs_inode
make v9fs_dentry_from_dir_inode static

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:37 -05:00
Aneesh Kumar K.V
a534c8d15b fs/9p: Prevent parallel rename when doing fid_lookup
During fid lookup we need to make sure that the dentry->d_parent doesn't
change so that we can safely walk the parent dentries. To ensure that
we need to prevent cross directory rename during fid_lookup. Add a
per superblock rename_sem rw_semaphore to prevent parallel fid lookup and
rename.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:35 -05:00
Aneesh Kumar K.V
ebf46264a0 fs/9p: Add support user. xattr
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:35 -05:00
M. Mohan Kumar
ef56547efa 9p: Implement LOPEN
Implement 9p2000.L version of open(LOPEN) interface in 9p client.

For LOPEN, no need to convert the flags to and from 9p mode to VFS mode.

Synopsis:

    size[4] Tlopen tag[2] fid[4] mode[4]

    size[4] Rlopen tag[2] qid[13] iounit[4]

[Fix mode bit format - jvrao@linux.vnet.ibm.com]

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
2010-08-02 14:28:32 -05:00
Venkateswararao Jujjuri (JV)
5643135a28 fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:32 -05:00
M. Mohan Kumar
01a622bd74 9p: Implement TMKDIR
Implement TMKDIR as part of 2000.L Work

Synopsis

    size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4]

    size[4] Rmkdir tag[2] qid[13]

Description

    mkdir asks the file server to create a directory with given name,
    mode and gid. The qid for the new directory is returned with
    the mkdir reply message.

Note: 72 is selected as the opcode for TMKDIR from the reserved list.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:31 -05:00
M. Mohan Kumar
4b43516ab1 9p: Implement TMKNOD
Synopsis

    size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4]

    size[4] Rmknod tag[2] qid[13]

Description

    mknod asks the file server to create a device node with given major and
    minor number, mode and gid. The qid for the new device node is returned
    with the mknod reply message.

[sripathik@in.ibm.com: Fix error handling code]

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:30 -05:00
Venkateswararao Jujjuri (JV)
50cc42ff3d 9p: Define and implement TSYMLINK for 9P2000.L
Create a symbolic link

SYNOPSIS

size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4]

size[4] Rsymlink tag[2] qid[13]

DESCRIPTION

Create a symbolic link named 'name' pointing to 'symtgt'.
gid represents the effective group id of the caller.
The  permissions of a symbolic link are irrelevant hence it is omitted
from the protocol.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:29 -05:00
Eric Van Hensbergen
09d34ee5f9 9p: Define and implement TLINK for 9P2000.L
This patch adds a helper function to get the dentry from inode and
uses it in creating a Hardlink

SYNOPSIS

size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s]

size[4] Rlink tag[2]

DESCRIPTION

Create a link 'newpath' in directory pointed by dfid linking to oldfid path.

[sripathik@in.ibm.com : p9_client_link should not free req structure
if p9_client_rpc has returned an error.]

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:28:09 -05:00
Sripathi Kodi
87d7845aa0 9p: Implement client side of setattr for 9P2000.L protocol.
SYNOPSIS

      size[4] Tsetattr tag[2] attr[n]

      size[4] Rsetattr tag[2]

    DESCRIPTION

      The setattr command changes some of the file status information.
      attr resembles the iattr structure used in Linux kernel. It
      specifies which status parameter is to be changed and to what
      value. It is laid out as follows:

         valid[4]
            specifies which status information is to be changed. Possible
            values are:
            ATTR_MODE       (1 << 0)
            ATTR_UID        (1 << 1)
            ATTR_GID        (1 << 2)
            ATTR_SIZE       (1 << 3)
            ATTR_ATIME      (1 << 4)
            ATTR_MTIME      (1 << 5)
            ATTR_ATIME_SET  (1 << 7)
            ATTR_MTIME_SET  (1 << 8)

            The last two bits represent whether the time information
            is being sent by the client's user space. In the absense
            of these bits the server always uses server's time.

         mode[4]
            File permission bits

         uid[4]
            Owner id of file

         gid[4]
            Group id of the file

         size[8]
            File size

         atime_sec[8]
            Time of last file access, seconds

         atime_nsec[8]
            Time of last file access, nanoseconds

         mtime_sec[8]
            Time of last file modification, seconds

         mtime_nsec[8]
            Time of last file modification, nanoseconds

Explanation of the patches:
--------------------------

*) The kernel just copies relevent contents of iattr structure to
   p9_iattr_dotl structure and passes it down to the client. The
   only check it has is calling inode_change_ok()
*) The p9_iattr_dotl structure does not have ctime and ia_file
   parameters because I don't think these are needed in our case.
   The client user space can request updating just ctime by calling
   chown(fd, -1, -1). This is handled on server side without a need
   for putting ctime on the wire.
*) The server currently supports changing mode, time, ownership and
   size of the file.
*) 9P RFC says "Either all the changes in wstat request happen, or
   none of them does: if the request succeeds, all changes were made;
   if it fails, none were."
   I have not done anything to implement this specifically because I
   don't see a reason.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:10 -05:00
Sripathi Kodi
f085312204 9p: getattr client implementation for 9P2000.L protocol.
SYNOPSIS

              size[4] Tgetattr tag[2] fid[4] request_mask[8]

              size[4] Rgetattr tag[2] lstat[n]

           DESCRIPTION

              The getattr transaction inquires about the file identified by fid.
              request_mask is a bit mask that specifies which fields of the
              stat structure is the client interested in.

              The reply will contain a machine-independent directory entry,
              laid out as follows:

                 st_result_mask[8]
                    Bit mask that indicates which fields in the stat structure
                    have been populated by the server

                 qid.type[1]
                    the type of the file (directory, etc.), represented as a bit
                    vector corresponding to the high 8 bits of the file's mode
                    word.

                 qid.vers[4]
                    version number for given path

                 qid.path[8]
                    the file server's unique identification for the file

                 st_mode[4]
                    Permission and flags

                 st_uid[4]
                    User id of owner

                 st_gid[4]
                    Group ID of owner

                 st_nlink[8]
                    Number of hard links

                 st_rdev[8]
                    Device ID (if special file)

                 st_size[8]
                    Size, in bytes

                 st_blksize[8]
                    Block size for file system IO

                 st_blocks[8]
                    Number of file system blocks allocated

                 st_atime_sec[8]
                    Time of last access, seconds

                 st_atime_nsec[8]
                    Time of last access, nanoseconds

                 st_mtime_sec[8]
                    Time of last modification, seconds

                 st_mtime_nsec[8]
                    Time of last modification, nanoseconds

                 st_ctime_sec[8]
                    Time of last status change, seconds

                 st_ctime_nsec[8]
                    Time of last status change, nanoseconds

                 st_btime_sec[8]
                    Time of creation (birth) of file, seconds

                 st_btime_nsec[8]
                    Time of creation (birth) of file, nanoseconds

                 st_gen[8]
                    Inode generation

                 st_data_version[8]
                    Data version number

              request_mask and result_mask bit masks contain the following bits
                 #define P9_STATS_MODE          0x00000001ULL
                 #define P9_STATS_NLINK         0x00000002ULL
                 #define P9_STATS_UID           0x00000004ULL
                 #define P9_STATS_GID           0x00000008ULL
                 #define P9_STATS_RDEV          0x00000010ULL
                 #define P9_STATS_ATIME         0x00000020ULL
                 #define P9_STATS_MTIME         0x00000040ULL
                 #define P9_STATS_CTIME         0x00000080ULL
                 #define P9_STATS_INO           0x00000100ULL
                 #define P9_STATS_SIZE          0x00000200ULL
                 #define P9_STATS_BLOCKS        0x00000400ULL

                 #define P9_STATS_BTIME         0x00000800ULL
                 #define P9_STATS_GEN           0x00001000ULL
                 #define P9_STATS_DATA_VERSION  0x00002000ULL

                 #define P9_STATS_BASIC         0x000007ffULL
                 #define P9_STATS_ALL           0x00003fffULL

        This patch implements the client side of getattr implementation for
        9P2000.L. It introduces a new structure p9_stat_dotl for getting
        Linux stat information along with QID. The data layout is similar to
        stat structure in Linux user space with the following major
        differences:

        inode (st_ino) is not part of data. Instead qid is.

        device (st_dev) is not part of data because this doesn't make sense
        on the client.

        All time variables are 64 bit wide on the wire. The kernel seems to use
        32 bit variables for these variables. However, some of the architectures
        have used 64 bit variables and glibc exposes 64 bit variables to user
        space on some architectures. Hence to be on the safer side we have made
        these 64 bit in the protocol. Refer to the comments in
        include/asm-generic/stat.h

        There are some additional fields: st_btime_sec, st_btime_nsec, st_gen,
        st_data_version apart from the bitmask, st_result_mask. The bit mask
        is filled by the server to indicate which stat fields have been
        populated by the server. Currently there is no clean way for the
        server to obtain these additional fields, so it sends back just the
        basic fields.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
2010-08-02 14:25:09 -05:00
Aneesh Kumar K.V
9ffaf63e34 fs/9p: Pass the correct user credentials during attach
We need to make sure we pass the right uid value
during attach. dotl is similar to dotu in this regard.
Without this mapped security model on dotl doesn't work

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:08 -05:00
Sripathi Kodi
7751bdb3a0 9p: readdir implementation for 9p2000.L
This patch implements the kernel part of readdir() implementation for 9p2000.L

    Change from V3: Instead of inode, server now sends qids for each dirent

    SYNOPSIS

    size[4] Treaddir tag[2] fid[4] offset[8] count[4]
    size[4] Rreaddir tag[2] count[4] data[count]

    DESCRIPTION

    The readdir request asks the server to read the directory specified by 'fid'
    at an offset specified by 'offset' and return as many dirent structures as
    possible that fit into count bytes. Each dirent structure is laid out as
    follows.

            qid.type[1]
              the type of the file (directory, etc.), represented as a bit
              vector corresponding to the high 8 bits of the file's mode
              word.

            qid.vers[4]
              version number for given path

            qid.path[8]
              the file server's unique identification for the file

            offset[8]
              offset into the next dirent.

            type[1]
              type of this directory entry.

            name[256]
              name of this directory entry.

    This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L.
    This function sends P9_TREADDIR command to the server. In response the server
    sends a buffer filled with dirent structures. This is different from the
    existing v9fs_dir_readdir() call which receives stat structures from the server.
    This results in significant speedup of readdir() on large directories.
    For example, doing 'ls >/dev/null' on a directory with 10000 files on my
    laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds
    with the new readdir.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:07 -05:00
M. Mohan Kumar
97e8442b09 9p: Make use of iounit for read/write
Change the v9fs_file_readn function to limit the maximum transfer size
based on the iounit or msize.

Also remove the redundant check for limiting the transfer size in
v9fs_file_write. This check is done by p9_client_write.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02 14:25:06 -05:00
Latchesar Ionkov
da7ddd3296 9p: Pass the correct end of buffer to p9stat_read
Pass the correct end of the buffer to p9stat_read.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-07-27 14:52:04 -05:00
Christoph Hellwig
7ea8085910 drop unused dentry argument to ->fsync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:05:02 -04:00
Linus Torvalds
4fd5ec509b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: Optimize TCREATE by eliminating a redundant fid clone.
  9p: cleanup: remove unneeded assignment
  9p: Add mksock support
  fs/9p: Make sure we properly instantiate dentry.
  9p: add 9P2000.L rename operation
  9p: add 9P2000.L statfs operation
  9p: VFS switches for 9p2000.L: VFS switches
  9p: VFS switches for 9p2000.L: protocol and client changes
2010-05-24 07:41:13 -07:00
Venkateswararao Jujjuri
6d27e64d74 9p: Optimize TCREATE by eliminating a redundant fid clone.
This patch removes a redundant fid clone on the directory fid and hence
reduces a server transaction while creating new filesystem object.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-22 12:39:02 -05:00
Dan Carpenter
fe5bd0736b 9p: cleanup: remove unneeded assignment
We never use "v9ses" and so we can remove it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-22 12:34:12 -05:00
Venkateswararao Jujjuri
75cc5c9b82 9p: Add mksock support
Without this patch, an attempt to mksock will get an EINVAL.

Before this patch:
[root@localhost 1dir]# mksock mysock
mksock: error making mysock: Invalid argument

With this patch:
[root@localhost 1dir]# mksock mysock
[root@localhost 1dir]# ls    -l mysock
s--------- 1 root root 0 2010-03-31 17:44 mysock

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-22 12:34:12 -05:00
Aneesh Kumar K.V
85e0df240e fs/9p: Make sure we properly instantiate dentry.
For lookup if we get ENOENT error from the server we still
instantiate the dentry. We need to make sure we have dentry
operations set in that case so that a later dput on the dentry
does the expected. Without the patch we get the below error

#ln  -sf abc abclink
ln: creating symbolic link `abclink': No such file or directory

Now on the host do
$ touch abclink

Guest now gives ENOENT error.
# ls
ls: cannot access abclink: No such file or directory

Debugged-by:Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-22 12:34:11 -05:00
Dmitry Monakhov
217f206d68 9p: replace inode uid,gid,mode initialization with helper function
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:23 -04:00
Sripathi Kodi
4681dbdacb 9p: add 9P2000.L rename operation
I made a V2 of this patch on top of my patches for VFS switches.
All the changes were due to change in some offsets.

rename - change name of file or directory

size[4] Trename tag[2] fid[4] newdirfid[4] name[s]
size[4] Rrename tag[2]

The rename message is used to change the name of a file, possibly moving it
to a new directory.  The 9P wstat message can only rename a file within the
same directory.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-21 16:44:34 -05:00
Sripathi Kodi
bda8e77520 9p: add 9P2000.L statfs operation
I made a V2 of this patch on top of my patches for VFS switches. The
change was adding v9fs_statfs pointer to v9fs_super_ops_dotl
instead of v9fs_super_ops.

statfs - get file system statistics

size[4] Tstatfs tag[2] fid[4]
size[4] Rstatfs tag[2] type[4] bsize[4] blocks[8] bfree[8] bavail[8]
                files[8] ffree[8] fsid[8] namelen[4]

The statfs message is used to request file system information returned
by the statfs(2) system call, which is used by df(1) to report file
system and disk space usage.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-21 16:44:33 -05:00
Sripathi Kodi
9b6533c9b3 9p: VFS switches for 9p2000.L: VFS switches
Implements VFS switches for 9p2000.L protocol.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-21 16:44:33 -05:00
Jens Axboe
0ed07ddb56 9p: add bdi backing to mount session
This ensures that dirty data gets flushed properly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22 11:42:00 +02:00
Linus Torvalds
749d229761 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: saving negative to unsigned char
  9p: return on mutex_lock_interruptible()
  9p: Creating files with names too long should fail with ENAMETOOLONG.
  9p: Make sure we are able to clunk the cached fid on umount
  9p: drop nlink remove
  fs/9p: Clunk the fid resulting from partial walk of the name
  9p: documentation update
  9p: Fix setting of protocol flags in v9fs_session_info structure.
2010-04-05 13:42:54 -07:00
Dan Carpenter
85a770a888 9p: return on mutex_lock_interruptible()
If "err" is -EINTR here the original code calls mutex_unlock() and then
returns, but it should just return directly.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
2010-04-05 14:32:33 -05:00
Sripathi Kodi
11e9b49b7f 9p: Creating files with names too long should fail with ENAMETOOLONG.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-05 10:37:37 -05:00
Aneesh Kumar K.V
6d96d3ab7a 9p: Make sure we are able to clunk the cached fid on umount
dcache prune happen on umount. So we cannot mark the client
satus disconnect. That will prevent a 9p call to the server

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-05 10:37:36 -05:00
Aneesh Kumar K.V
d994f4058d 9p: drop nlink remove
We need to drop the link count on the inode of a sucessfull remove

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-05 10:37:36 -05:00
Aneesh Kumar K.V
5b0fa207d1 fs/9p: Clunk the fid resulting from partial walk of the name
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-05 10:37:36 -05:00
Sripathi Kodi
476ada0436 9p: Fix setting of protocol flags in v9fs_session_info structure.
This patch fixes a simple bug I left behind in my earlier protocol
negotiation patch.

Thanks,
Sripathi.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-05 10:37:36 -05:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Sachin Prabhu
f78233dd44 9p: Skip check for mandatory locks when unlocking
While investigating a bug, I came across a possible bug in v9fs. The
problem is similar to the one reported for NFS by ASANO Masahiro in
http://lkml.org/lkml/2005/12/21/334.

v9fs_file_lock() will skip locks on file which has mode set to 02666.
This is a problem in cases where the mode of the file is changed after
a process has obtained a lock on the file. Such a lock will be skipped
during unlock and the machine will end up with a BUG in
locks_remove_flock().

v9fs_file_lock() should skip the check for mandatory locks when
unlocking a file.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13 09:05:37 -06:00
jvrao
fc0f296126 9p: Fixes a simple bug enabling writes beyond 2GB.
Fixes a simple bug so that large files beyond 2GB can be created.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13 08:59:54 -06:00
Sripathi Kodi
45bc21edb5 9p: Change the name of new protocol from 9p2010.L to 9p2000.L
This patch changes the name of the new 9P protocol from 9p2010.L to
9p2000.u. This is because we learnt that the name 9p2010 is already
being used by others.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13 08:57:29 -06:00
Aneesh Kumar K.V
fae4528b23 fs/9p: re-init the wstat in readdir loop
This ensure that on failure when we free the stat buf we don't end up
freeing an already freed pointer in the earlier loop

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13 08:57:29 -06:00
Aneesh Kumar K.V
5717144a01 fs/9p: Add hardlink support to .u extension
For regular file and directories we put the link
count in th extension field in a tagged string format.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05 15:04:42 -06:00
Sripathi Kodi
342fee1d5c 9P2010.L handshake: Remove "dotu" variable
Removes 'dotu' variable and make everything dependent
on 'proto_version' field.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05 15:04:42 -06:00
Sripathi Kodi
dd6102fbd9 9P2010.L handshake: Add VFS flags
Add 9P2000.u and 9P2010.L protocol flags to V9FS VFS

This patch adds 9P2000.u and 9P2010.L protocol flags into V9FS VFS side code
and removes the single flag used for 'extended'.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05 15:04:41 -06:00
Eric Van Hensbergen
bf2d29c64d 9p: fix memory leak in v9fs_parse_options()
If match_strdup() fail this function exits without freeing the options string.

Signed-off-by: Venkateswararao Jujjuri <jvrao@us.ibm.com>
Sigend-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-02-08 17:59:34 -06:00
Eric Van Hensbergen
d8c8a9e365 9p: fix option parsing
Options pointer is being moved before calling kfree() which seems
to cause problems.  This uses a separate pointer to track and free
original allocation.

Signed-off-by: Venkateswararao Jujjuri <jvrao@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>w
2010-02-08 16:23:23 -06:00
M. Mohan Kumar
7a4439c406 9p: Include fsync support for 9p client
Implement the fsync in the client side by marking stat field values to 'don't touch' so that server may 
interpret it as a request to guarantee that the contents of the associated file are committed to stable 
storage before the Rwstat message is returned.

Without this patch, calling fsync on a 9p file results in "Invalid argument" error. Please check the attached 
C program.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> 
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> 
Acked-by: Venkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-02-08 15:36:48 -06:00
Al Viro
083c73c253 fix oops in fs/9p late mount failure
if 9P ->get_sb() fails late (at root inode or root dentry
allocation), we'll hit its ->kill_sb() with NULL ->s_root

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26 22:22:27 -05:00