Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Small number of cleanups that were either missed in previous versions
or detected by new cppcheck version.
There is no reason to set type_base here: the chip doesn't set
num_type_regs and none of the IRQs have type information so it's
not possible for regmap-irq to configure IRQ types.
Type registers are also deprecated in regmap-irq, so any IRQ type
support in the future should be implemented using config registers
instead.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220721102558.25457-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Type registers in regmap-irq have been deprecated in favor of config
registers, which are more general. Chips using type_base can switch
over to a single config base register and a standard ->set_irq_type()
callback provided by regmap-irq, which uses the type info associated
with each 'struct regmap_irq' to update type registers in the same
way as the old code did.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220721102558.25457-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.
(This mirrors commit 1e5907bcb3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
(This mirrors commit c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns:
sound/soc/codecs/src4xxx.c:280:3: error: variable 'd' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:298:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_11, d);
^
sound/soc/codecs/src4xxx.c:223:20: note: initialize the variable 'd' to silence this warning
int val, pj, jd, d;
^
= 0
sound/soc/codecs/src4xxx.c:280:3: error: variable 'jd' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:293:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_10, jd);
^~
sound/soc/codecs/src4xxx.c:223:17: note: initialize the variable 'jd' to silence this warning
int val, pj, jd, d;
^
= 0
sound/soc/codecs/src4xxx.c:280:3: error: variable 'pj' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
sound/soc/codecs/src4xxx.c:288:59: note: uninitialized use occurs here
ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_0F, pj);
^~
sound/soc/codecs/src4xxx.c:223:13: note: initialize the variable 'pj' to silence this warning
int val, pj, jd, d;
^
= 0
3 errors generated.
The datasheet does not have any default values for these regmap values
so pick some arbitrary values and print to the user that this is the
case to silence the warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1691
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Suggested-by: Matt Flax <flatmax@flatmax.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Matt Flax <flatmax@flatmax.com>
Link: https://lore.kernel.org/r/20220823151939.2493697-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
nau8540 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
nau8825 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
nau8824 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
nau8821 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
we've been stuck with problems in the dual-amplifier configurations where
one of the two devices seems to become UNATTACHED and never regains sync,
see https://github.com/thesofproject/linux/issues/3638.
This is a rather infrequent issue that may happen once or twice per month,
but still it remains a concern.
One possibility is that the device does lose sync but somehow our hardware
detection fails to see it resync.
This series just adds a basic read directly from the PING frames to help
confirm if yes/no the device regain sync.
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a patch set for rather simple conversions from the plain
sprintf() & co to the new helpers, sysfs_emit() and sysfs_emit_at().
No functional changes are expected.
Only report a button state change if the interrupt status shows that
there was a button event.
Previously the code would always drop into the button reporting at the
end of interrupt handling if the jack was present. If neither of the
button report interrupts were pending it would report all buttons
released. This could then lead to a button being reported as released
while it is still pressed.
Fixes: c5b8ee0879 ("ASoC: cs42l42: Report jack and button detection")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815123138.3810249-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two commits referenced below break mono playback via I2S DAI because
they set BCLK to half the required speed. For PCM transport over I2S, the
number of transmitted channels is always 2, even for mono playback.
Fixes: dcd79364bf ("ASoC: codec: tlv3204: Enable 24 bit audio support")
Fixes: 40b3713628 ("ASoC: tlv320aic32x4: Fix bdiv clock rate derivation")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220810104156.665452-1-p.zabel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
The first two fixes should be straightforward.
The latter two clean up what looks to me like a mess in the setting of
power levels. However we settle it, we should then do the same changes
to TAS2764, which has the same template (and maybe there are other
drivers).
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one can mute an ongoing stream
by toggling a speaker pin control.
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
