Currently the driver marks the controller as unrecoverable if there is an
asynchronous reset or fault during the initialization, reinitialization
post reset, and OS resume.
Enhance driver to retry the initialization, re-initialization, and resume
sequences for a maximum of 3 times if the controller became faulty or
asynchronously reset due to a firmware activation during the initialization
sequence.
Link: https://lore.kernel.org/r/20211220141159.16117-15-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Save snapdump and fault the controller with the given reason code if it is
already not in the fault or not in asynchronous reset. This ensures that
soft reset is issued from the watchdog thread. This will also be used to
handle initialization time faults/resets/timeout as in those cases
immediate soft reset invocation is not required.
Link: https://lore.kernel.org/r/20211220141159.16117-12-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following special handling is needed for UNMAP commands issued to NVMe
drives:
- On B0 boards, if the parameter list length is greater than 24 and not a
16-byte multiple, then truncate the parameter list length to a 16-byte
multiple.
- On A0 boards, if the parameter list length is greater than block
descriptor data length + 8, then truncate the parameter list length to
block descriptor data length + 8 value.
Link: https://lore.kernel.org/r/20211220141159.16117-10-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SAS4 Controller firmware exposes the SES devices in Managed PCIe Switch
as a PCIe Device Type SCSI Device
(MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE).
Driver is enhanced to handle this device type by:
- Exposing the device to the upper layers and
- Not updating any hardware sectors & virtual boundary settings as these
settings are needed only for NVMe devices.
Link: https://lore.kernel.org/r/20211220141159.16117-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
I intended to move from snprintf() to scnprintf() in the previous patch but
I messed up and did not do that. The result of my bug is that it this
function could trigger a WARN() if the buffer is too large.
Link: https://lore.kernel.org/r/20211013083005.GA8592@kili
Fixes: 76a4f7cc59 ("scsi: mpi3mr: Clean up mpi3mr_print_ioc_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This function is more complicated than necessary.
If we change from scnprintf() to snprintf() that lets us remove the if
bytes_wrote < sizeof(protocol) checks. Also, we can use bytes_wrote ? ","
: "" to print the comma and remove the separate if statement and the
"is_string_nonempty" variable.
[mkp: a few formatting cleanups and s/wrote/written/]
Link: https://lore.kernel.org/r/20210916132605.GF25094@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pci_alloc_irq_vectors_affinity() function returns negative error codes
or it returns a number between the minimum vectors (1 in this case) and
max_vectors. It won't return zero. Because "i" is a u16 then the error
handling won't work. And also if it did work the error code was not set.
Really "max_vectors" can be an int as well because we're doing a min_t() on
int type. The other change is that it's better to remove unnecessary
initialization so that static checkers can warn us if there are ever
uninitialized variable bugs introduced in the future.
I changed the error code from -1 (-EPERM) if the kmalloc() failed to
-ENOMEM. And on success path I changed it from "return retval;" to "return
0;" which shouldn't affect the compiled code but makes it more readable.
Link: https://lore.kernel.org/r/YMCJcnmSI4kOIyv/@mwanda
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register driver for threaded interrupts.
By default the driver will attempt I/O completion from interrupt context
(primary handler). Since the driver tracks per reply queue outstanding
I/Os, it will schedule threaded ISR if there are any outstanding I/Os
expected on that particular reply queue.
Threaded ISR (secondary handler) will loop for I/O completion as long as
there are outstanding I/Os (speculative method using same per reply queue
outstanding counter) or it has completed some X amount of commands
(something like budget).
Link: https://lore.kernel.org/r/20210520152545.2710479-18-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Detection of firmware fault or any kind of unresponsiveness in the
controller (any admin command which times out) results in resetting the
controller. The primary reset mechanisms used are either soft reset or diag
fault reset. A reset is performed if the host sets the ResetAction field in
the HostDiagnostic register to either 001b (soft reset) or 007b (diag fault
reset). After successfully resetting the controller the driver
reinitializes the controller by going through start of the day
initialization procedure. Pending I/Os during the reset are returned back
to the SCSI midlayer for retry.
Link: https://lore.kernel.org/r/20210520152545.2710479-10-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.co
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
