The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488860/
Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is currently two function for performing reset: dsi_sw_reset and
dsi_sw_reset_restore. Only difference between those is that latter one
assumes that DSI controller is enabled. In contrary former one assumes
that controller is disabled and executed during power-on. However this
assumtion is not true mobile devices which have boot splash set up by
boot-loader.
This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable
DSI controller during reset sequence if it's enabled.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489152/
Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz
[DB: fixed the typo in the commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for writing CRC values for the interface block to
the debugfs by calling the necessary MISR setup/collect methods.
Changes since V1:
- Set values_cnt to only include phys with backing hw_intf
- Loop over all drm_encs connected to crtc
Changes since V2:
- Remove vblank.h inclusion
- Change `pos + i` to `pos + entries`
- Initialize values_cnt to 0 for encoder
- Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and
"intf" to "enc")
- Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs
- Add checks for setup_misr and collect_misr in
dpu_encoder_get_num_hw_intfs
Changes since V3:
- Remove extra whitespace
- Change "enc" to "encoder"
- Move crcs array to dpu_crtc_get_encoder_crc
- Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490736/
Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move layer mixer-specific section of dpu_crtc_get_crc() into a separate
helper method. This way, we can make it easier to get CRCs from other HW
blocks by adding other get_crc helper methods.
Changes since V1:
- Move common bitmasks to dpu_hw_util.h
- Move common CRC methods to dpu_hw_util.c
- Update copyrights
- Change crcs array to a dynamically allocated array and added it as a
member of crtc_state
Changes since V2:
- Put changes for hw_util into a separate commit
- Revert crcs array to a static array
- Add else case for set_crc_source to return EINVAL if no valid source
is selected
- Add DPU_CRTC_MAX_CRC_ENTRIES macro
Changes since V3:
- Move crcs array into dpu_crtc_get_lm_crc
- Remove comment about crcs array in dpu_crtc_state struct
- Revert `lm` rename
- Remove DPU_CRTC_MAX_CRC_ENTRIES macro
- Return EINVAL in dpu_crtc_get_crc if no valid CRC source is set
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490735/
Link: https://lore.kernel.org/r/20220622171835.7558-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
intf and wb resources are not dependent on the rm global
state so need not be allocated during dpu_encoder_virt_atomic_mode_set().
Move the allocation of intf and wb resources to dpu_encoder_setup_display()
so that we can utilize the hw caps even during atomic_check() phase.
Since dpu_encoder_setup_display() already has protection against
setting invalid intf_idx and wb_idx, these checks can now
be dropped as well.
changes in v2:
- add phys->hw_intf and phys->hw_wb checks back
changes in v3:
- correct the Fixes tag
Fixes: e02a559a72 ("drm/msm/dpu: make changes to dpu_encoder to support virtual encoder")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489885/
Link: https://lore.kernel.org/r/1655406084-17407-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add writeback support for sc7180 devices. This has been
validated on sc7180 chromebook using IGT writeback test
suite.
localhost /usr/local/libexec/igt-gpu-tools # ./kms_writeback
Starting subtest: writeback-pixel-formats
Subtest writeback-pixel-formats: SUCCESS (0.001s)
Starting subtest: writeback-invalid-parameters
Subtest writeback-invalid-parameters: SUCCESS (0.004s)
Starting subtest: writeback-fb-id
Subtest writeback-fb-id: SUCCESS (0.009s)
Starting subtest: writeback-check-output
Subtest writeback-check-output: SUCCESS (0.203s)
Adding this will increase IGT coverage on chromebooks and also
allow using writeback functionality for other use-cases as
necessary.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485787/
Link: https://lore.kernel.org/r/20220510235439.31916-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fixes for v5.19-rc5
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so that
userspace sees the value *after* it is incremented if waiting for vblank
events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash in
probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check in
dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in submit
ioctl
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvswNKdd02EYKYv5Zjv7f+mcqeWC7hHQ1SBjqYzN_ZHnA@mail.gmail.com
Fixes for v5.19-rc4
- Workaround for parade DSI bridge power sequencing
- Fix for multi-planar YUV format offsets
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked access
in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a being hit frequently
in CI.
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to address
bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring interrupt
mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
- Fix to ensure mmap offset is initialized to avoid memory corruption
from unpin/evict
- Fix double runpm disable in probe-defer path
- VMA fenced-unpin fixes
- Fix for WB max-width
- Fix for rare dp resolution change issue
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvdsOF1-+WfTWyEyu33XPcvxOCU00G-dz7EF2J+fdyUHg@mail.gmail.com
The 'vsync_cnt' is used to count the number of frames for a crtc.
Unfortunately, we increment the count after waking up userspace via
dpu_crtc_vblank_callback() calling drm_crtc_handle_vblank().
drm_crtc_handle_vblank() wakes up userspace processes that have called
drm_wait_vblank_ioctl(), and if that ioctl is expecting the count to
increase it won't.
Increment the count before calling into the drm APIs so that we don't
have to worry about ordering the increment with anything else in drm.
This fixes a software video decode test that fails to see frame counts
increase on Trogdor boards.
Cc: Mark Yacoub <markyacoub@chromium.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 885455d6bf ("drm/msm: Change dpu_crtc_get_vblank_counter to use vsync count.")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/490531/
Link: https://lore.kernel.org/r/20220622023855.2970913-1-swboyd@chromium.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
