SLPC min/max frequency updates require H2G calls. We are seeing
timeouts when GuC channel is backed up and it is unable to respond
in a timely fashion causing warnings and affecting CI.
This is seen when waitboosting happens during a stress test.
this patch updates the waitboost path to use a non-blocking
H2G call instead, which returns as soon as the message is
successfully transmitted.
v2: Use drm_notice to report any errors that might occur while
sending the waitboost H2G request (Tvrtko)
v3: Add drm_notice inside force_min_freq (Ashutosh)
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220623003225.23301-1-vinay.belgaumkar@intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sync up with v5.18-rc1, in particular to get 5e3094cfd9
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Freq caps (i.e. RP0, RP1 and RPn frequencies) are read from HW. However the
formats (bit positions, widths, registers and units) of these vary for
different generations with even more variations arriving in the future. In
order not to have to do identical computation for these caps in multiple
places, here we centralize the computation of these caps. This makes the
code cleaner and also more extensible for the future.
v2: Clarify that caps are in "hw units" in comments (Lucas De Marchi)
v3: Minor checkpatch fix
v4: s/intel_rps_get_freq_caps/gen6_rps_get_freq_caps/ (Badal Nilawar)
v5: Changes comments to kernel doc (Anshuman Gupta)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406191848.20895-1-ashutosh.dixit@intel.com
Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.
For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):
* Pre-gen6: 0x10000
* Gen6-Gen11 + RKL: 0x140000
v2:
- Create separate patch to swtich a few register definitions to be
relative to the MCHBAR mirror base.
- Drop upper bound of MCHBAR mirror from commit message; there are too
many different combinations between various platforms to list out,
and the documentation is spotty for the older pre-gen6 platforms
anyway.
Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
Define helpers and struct members required to record boost info.
Boost frequency is initialized to RP0 at SLPC init. Also define num_waiters
which can track the pending boost requests.
Boost will be done by scheduling a worker thread. This will avoid
the need to make H2G calls inside an interrupt context. Initialize the
worker function during SLPC init as well. Had to move intel_guc_slpc_init
a few lines below to accommodate this.
v2: Add a workqueue to handle waitboost
v3: Code review comments (Ashutosh)
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-2-vinay.belgaumkar@intel.com
Cache rp0, rp1 and rpn platform limits into SLPC structure
for range checking while setting min/max frequencies.
Also add "soft" limits which keep track of frequency changes
made from userland. These are initially set to platform min
and max.
v2: Address review comments (Michal W)
v3: Formatting (Michal W)
v4: Add separate function to parse rp values (Michal W)
v5: Perform range checking for set min/max (Michal W)
v6: checkpatch() and rename static functions (Michal W)
v7: check ret code while setting SLPC limits (Michal W)
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-12-vinay.belgaumkar@intel.com
Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.
v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)
v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)
v4: Optimize the stringify function and other comments (Michal W)
v5: Enable slpc as well before declaring GuC submission status (Michal W)
v6: Checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com
