front end is initialized during init_hw, but not
power gated. There are some left over valuse and will
cause some diags test failed. Power gated all front
end pipes will make sure every test has same starting
point.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the programming sequence to allow DMCU firmware to be loaded by
PSP. This code detects whether the firmware is loaded and does a check
to verify the expected interface version and checks for correct response
from micro controller.
Added registry key method to allow force loading of firmware from kernel
mode driver for test purposes. This is old method of firmware loading
without PSP.
Moved some init sequences into dc/dmcu.
Changed loading sequence to initialize IRAM after firmware completely
loaded. Firmware will now disable features that use IRAM
until initialized.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program cursor attributes during set mode is only needed
in case of pipe slipt, bottom pipe should be programmed
same as top pipe. Need to program if address is 0.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
reading dpcd 0x600 cause link loss for a particular USB-C dock with
thurderbolt. workaround by avoiding dcpd 0x600 read unless it's
necessary.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1001
acquire_free_pipe_for_stream() error: we previously assumed 'head_pipe'
could be null (see line 998)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1808
dc_validate_global_state() error: we previously assumed 'new_ctx' could
be null (see line 1778)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:148 create_links()
error: potential null dereference 'link->link_enc'. (kzalloc returns
null)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:298
dc_stream_set_cursor_position() error: we previously assumed 'hubp'
could be null (see line 294)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_timing_generator.c:1124
dce110_timing_generator_validate_timing() warn: variable dereferenced
before check 'timing' (see line 1116)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/log_helpers.c:79
dc_conn_log() error: buffer overflow 'signal_type_info_tbl' 10 <= 10
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:266
bios_parser_get_dst_obj() error: uninitialized symbol 'id'.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_audio.c:357
dce_aud_az_enable() warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_resource.c:958
dcn10_acquire_idle_pipe_for_layer() error: we previously assumed
'head_pipe' could be null (see line 952)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
in eDP+ HDMI/DP clone or extended configuration, audio inst changed from inst 1 to inst0.
No failure related this though, just playback device endpoint inst changed.
Also remove one addition register read.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently in the case where some of the allocations fail for dce110_tgv,
dce110_xfmv, dce110_miv or dce110_oppv then the exit return path ends
up leaking allocated objects. Fix this by kfree'ing them before returning.
Also re-work the comparison of the null pointers to use the !ptr idiom.
Detected by CoverityScan, CID#1460246, 1460325, 1460324, 1460392
("Resource Leak")
Fixes: c4562236b3bc ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While validation fbc, array_mode of the pipe is accessed
without checking plane_state exists for it.
Causing to null pointer dereferencing followed by
reboot when a crtc associated with external display(not
connected) is page flipped.
This patch adds a check for plane_state before using
it to validate fbc.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DP active dongles, the dpcd dongle caps are read but not
used to validate mode timing. This addresses this.
In particular, this change fixes light up on the HDMI 4k TV
connected through DP active dongle. Since the 4k TV defaults
to YCbCr420, which the dongle don't support.
This change does not address MST cases, a more generalized
approach must be taken for that.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core_link_disable_stream should be called when the new stream is null
(i.e. want to disable). Modify the if condition to reflect that.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When link training fail in MST case, we will divide by 0
when calculating avg_time_slots_per_mtp, so we cannot
proceed.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smatch reported:
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce80/command_table_helper_dce80.c:351:71: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce80_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce110/command_table_helper_dce110.c:361:72: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce110_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce112/command_table_helper_dce112.c:415:72: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce112_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce112/command_table_helper2_dce112.c:415:73: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce112_get_table2'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_surface.c:148:34: warning: non-ANSI function declaration of function 'dc_create_gamma'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_surface.c:178:50: warning: non-ANSI function declaration of function 'dc_create_transfer_func'
This fixes them.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We assign "v_init = asic_blank_start;" a few lines earlier so there is
no need to do it again inside the if statements. Also "v_init" is
unsigned so it can't be less than zero.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis tools get annoyed that we don't indent this if
statement. Actually, the if statement isn't required because kfree()
can handle NULL pointers just fine. The DCE110STRENC_FROM_STRENC()
macro is a wrapper around container_of() but it's basically a no-op or a
cast. Anyway, it's not really appropriate here so it should be removed
as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc warns about an ambiguous integer calculation:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function 'calculate_bandwidth':
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:534:5: error: this decimal constant is unsigned only in ISO C90 [-Werror]
data->lb_line_pitch = bw_ceil2(bw_mul(bw_div(bw_frc_to_fixed(2401171875, 100000000), bw_int_to_fixed(3)), bw_ceil2(data->source_width_in_lb, bw_int_to_fixed(8))), bw_int_to_fixed(48));
^~~~
Marking the constant as explicitly unsigned makes it work fine everywhere
without warnings.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
