The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:
The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
is supported for all modes indicated by the DC_XXbit flags.
So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.
In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d0c94692e0 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-4-maxime@cerno.tech
The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.
This specification, in its section 6.2.4, indeed states:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is not permitted for any Deep Color mode.
This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is also 36-bit mode but does not require the further use
of the Deep Color modes described in section 6.5.2 and 6.5.3.
This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.
This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.
Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()
Fixes: d0c94692e0 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-3-maxime@cerno.tech
The drm_hdmi_avi_infoframe_colorspace() function actually sets the
colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe
structure with DRM_MODE_COLORIMETRY_* values.
To make things worse, the hdmi_avi_infoframe structure also has a
colorspace field used to signal whether an RGB or YUV output is being
used.
Let's remove the inconsistency and allow for the colorspace usage by
renaming the function.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-2-maxime@cerno.tech
Improve non-desktop quirk logging if the EDID indicates non-desktop. If
both are set, note about redundant quirk. If there's no quirk but the
EDID indicates non-desktop, don't log non-desktop is set to 0.
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211228101051.317989-1-jani.nikula@intel.com
Now that there is support for the Microsoft VSDB for HMDs, remove the
non-desktop quirk for two devices that are verified to contain it in
their EDID: HPN-3515 and LEN-B800.
Presumably most of the other Windows Mixed Reality headsets contain it
as well, but there are ACR-7FCE and SEC-5194 devices without it.
Tested with LEN-B800.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220123101653.147333-2-philipp.zabel@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF298ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIJYH/1rsEFQQ6caeQdy1
z9eFIe48DNM4l7bFk+qEj2UAbzPdahVJ299Mg5fW0n2CDemOc9/n0b9TxQ37YObi
mOzu0xwJVupIxkyFMPQSSc2q8aLm67NSpJy08DsmaNses5hSvu8x15RPHLQTybjt
SwtKns+jpCq79P1GWbrB5e5UkLb0VNoxNp4L1U4pMrYGcEkJUXbaxNY2V/JcXdM7
Vtn+qN0T/J6V6QVftv0t8Ecj3bjEnmL3kZHaTaNg3dGeKRpCGyHc5lcBQ0cNFG6t
vjZ9VbuhBzGI3TN2tHH5hpA1UXo7HPBBCwQqxF1jeGLGHULikYwZ3TAPWqL3QZqC
9cxr9SY=
=p75d
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15-rc7' into drm-next
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In commit e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.
Let's fix this by adding a bounds check.
This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`.
Fixes: e11f5bd822 ("drm: Add support for DP 1.4 Compliance edid corruption test")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid
Signed-off-by: Dave Airlie <airlied@redhat.com>
- fbdev/efifb: Release PCI device's runtime PM ref during FB destr\
oy (Imre)
i915 Core Driver Changes:
- Only access SFC_DONE in media when not fused off for graphics 12 and newer.
- Double Memory latency values from pcode for DG2 (Matt Roper)
- ADL-S PCI ID update (Tejas)
- New DG1 PCI ID (Jose)
- Fix regression with uncore refactoring (Dave)
i915 Display Changes:
- ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita)
- DG2 display fixes (Ankit, Jani)
- Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman)
- General display simplifications and clean-ups (Jani, Swati, Jose, Ville)
- PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong)
- Nuke ORIGIN_GTT (Jose)
- Return proper DPRX link training result (Lee)
- FBC related refactor and fixes (Ville)
- Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng)
- DP 2.0 preparation work (Jani)
- Silence __iomem sparse warn (Ville)
- Clean up DPLL stuff (Ville)
- Fix various dp/edp max rates (Matt Atwood, Animesh, Jani)
- Remove VBT ddi_port_info caching (Jani)
- DSI driver improvements (Lee)
- HDCP fixes (Juston)
- Associate ACPI connector nodes with connector entries (Heikki)
- Add support for out-of-bound hotplug events (Hans)
- VESA vendor block and drm/i915 MSO use of it (Jani)
- Fixes for bigjoiner (Ville)
- Update memory bandwidth parameters (RK)
- DMC related fixes (Chris, Jose)
- HDR related fixes and improvements (Tejas)
- g4x/vlv/chv CxSR/wm fixes/cleanups (Ville)
- Use BIOS provided value for RKL Audio's HDA link (Kai-Heng)
- Fix the dsc check while selecting min_cdclk (Vandita)
- Split and constify vtable (Dave)
- Add ww context to intel_dpt_pin (Maarten)
- Fix bdb version check (Lukasz)
- DP per-lane drive settings prep work and other DP fixes (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmFbTsgACgkQ+mJfZA7r
E8onwQf/QLOtlY0Al7oVEQrWu7I6vzajyQz6oGbj3rTNMG6m/sDNCgKZaNmxRnQo
O+YjccMW/dnsFhSqckm8JzQUrHPSmDExBu+HGSkxNTod7UYVEEd0MYETnBShF4hv
vwoPgRuzny5+jEDuBv9GBD/6d2su9Hl/OWTQ/YPjdJKyIWLjKhbxET7FExlV6MtG
I80OyJSaV2L4EAgPT5TBSAXvzeUFAevw2O9aOSI+rTtAOfXI7TkB7E38Tjzc7uSd
YN9/43NXoJYVB9yhVXKJgK90COMSREFv/lUupSXqN/W5lOD4xLg0W6vD6kKX5Z4T
IrfvR6T5Cz+OfwSLUlzmWeO+l9VcqQ==
=9tCx
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2021-10-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
- fbdev/efifb: Release PCI device's runtime PM ref during FB destr\
oy (Imre)
i915 Core Driver Changes:
- Only access SFC_DONE in media when not fused off for graphics 12 and newer.
- Double Memory latency values from pcode for DG2 (Matt Roper)
- ADL-S PCI ID update (Tejas)
- New DG1 PCI ID (Jose)
- Fix regression with uncore refactoring (Dave)
i915 Display Changes:
- ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita)
- DG2 display fixes (Ankit, Jani)
- Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman)
- General display simplifications and clean-ups (Jani, Swati, Jose, Ville)
- PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong)
- Nuke ORIGIN_GTT (Jose)
- Return proper DPRX link training result (Lee)
- FBC related refactor and fixes (Ville)
- Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng)
- DP 2.0 preparation work (Jani)
- Silence __iomem sparse warn (Ville)
- Clean up DPLL stuff (Ville)
- Fix various dp/edp max rates (Matt Atwood, Animesh, Jani)
- Remove VBT ddi_port_info caching (Jani)
- DSI driver improvements (Lee)
- HDCP fixes (Juston)
- Associate ACPI connector nodes with connector entries (Heikki)
- Add support for out-of-bound hotplug events (Hans)
- VESA vendor block and drm/i915 MSO use of it (Jani)
- Fixes for bigjoiner (Ville)
- Update memory bandwidth parameters (RK)
- DMC related fixes (Chris, Jose)
- HDR related fixes and improvements (Tejas)
- g4x/vlv/chv CxSR/wm fixes/cleanups (Ville)
- Use BIOS provided value for RKL Audio's HDA link (Kai-Heng)
- Fix the dsc check while selecting min_cdclk (Vandita)
- Split and constify vtable (Dave)
- Add ww context to intel_dpt_pin (Maarten)
- Fix bdb version check (Lukasz)
- DP per-lane drive settings prep work and other DP fixes (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 05 Oct 2021 04:58:16 AEST
# gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown]
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YVtPk6llsxBFiw7W@intel.com
In the commit bac9c29482 ("drm/edid: Break out reading block 0 of
the EDID") I broke out reading the base block of the EDID to its own
function. Unfortunately, when I did that I messed up the handling when
drm_edid_is_zero() indicated that we had an EDID that was all 0x00 or
when we went through 4 loops and didn't get a valid EDID. Specifically
I needed to pass the broken EDID to connector_bad_edid() but now I was
passing an error-pointer.
Let's re-jigger things so we can pass the bad EDID in properly.
Fixes: bac9c29482 ("drm/edid: Break out reading block 0 of the EDID")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004092100.1.Ic90a5ebd44c75db963112be167a03cc96f9fb249@changeid
In the patch ("drm/edid: Allow the querying/working with the panel ID
from the EDID") we introduced a different way of working with the
panel ID stored in the EDID. Let's use this new way for the quirks
code.
Advantages of the new style:
* Smaller data structure size. Saves 4 bytes per panel.
* Iterate through quirks structure with just "==" instead of strncmp()
* In-kernel storage is more similar to what's stored in the EDID
itself making it easier to grok that they are referring to the same
value.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.4.I6103ce2b16e5e5a842b14c7022a034712b434609@changeid
EDIDs have 32-bits worth of data which is intended to be used to
uniquely identify the make/model of a panel. This has historically
been used only internally in the EDID processing code to identify
quirks with panels.
We'd like to use this panel ID in panel drivers to identify which
panel is hooked up and from that information figure out power sequence
timings. Let's expose this information from the EDID code and also
allow it to be accessed early, before a connector has been created.
To make matching in the panel drivers code easier, we'll return the
panel ID as a 32-bit value. We'll provide some functions for
converting this value back and forth to something more human readable.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.3.I4a672175ba1894294d91d3dbd51da11a8239cf4a@changeid
A future change wants to be able to read just block 0 of the EDID, so
break it out of drm_do_get_edid() into a sub-function.
This is intended to be a no-op change--just code movement.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.2.I62e76a034ac78c994d40a23cd4ec5aeee56fa77c@changeid
The VESA Organization Vendor-Specific Data Block, defined in VESA
DisplayID Standard v2.0, specifies the eDP Multi-SST Operation (MSO)
stream count and segment pixel overlap.
DisplayID v1.3 has Appendix B: DisplayID as an EDID Extension,
describing how DisplayID sections may be embedded in EDID extension
blocks. DisplayID v2.0 does not have such a section, perhaps implying
that DisplayID v2.0 data should not be included in EDID extensions, but
rather in a "pure" DisplayID structure at its own DDC address pair
A4h/A5h, as described in VESA E-DDC Standard v1.3 chapter 3.
However, in practice, displays out in the field have embedded DisplayID
v2.0 data blocks in EDID extensions, including, in particular, some eDP
MSO displays, where a pure DisplayID structure is not available at all.
Parse the MSO data from the DisplayID data block. Do it as part of
drm_add_display_info(), extending it to parse also DisplayID data to
avoid requiring extra calls to update the information.
v2: Check for VESA OUI (Ville)
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73ca2887e7b37880690f5c9ba4594c9cd1170669.1630419362.git.jani.nikula@intel.com
We'll be adding more DisplayID specific functions going forward, so
start off by splitting out a few functions to a separate file.
We don't bother with exporting the functions; at least for now they
should be needed solely within drm.ko.
No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07942d5011891b8e8f77245c78b34f4af97a9315.1617024940.git.jani.nikula@intel.com
We have DRM drivers based on USB, SPI and platform devices. All of them
are fine with storing their device reference in struct drm_device.dev.
PCI devices should be no exception. Therefore struct drm_device.pdev is
deprecated.
Instead upcast from struct drm_device.dev with to_pci_dev(). PCI-specific
code can use dev_is_pci() to test for a PCI device. This patch changes
the DRM core code and documentation accordingly.
v4:
* split-off pdev deprecation into separate patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Andy Lavr <andy.lavr@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118131420.15874-2-tzimmermann@suse.de
Add support for DP-HDMI2.1 PCON
From the series cover letter:
This patch series attempts to add support for a DP-HDMI2.1 Protocol
Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata
E5 to DisplayPort_v2.0:
https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299
The details are mentioned in:
VESA DP-to-HDMI PCON Specification Standalone Document
https://groups.vesa.org/wg/DP/document/15651
This series starts with adding support for FRL (Fixed Rate Link)
Training between the PCON and HDMI2.1 sink.
As per HDMI2.1 specification, a new data-channel or lane is added in
FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher
bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4
lanes).
With these patches, the HDMI2.1 PCON can be configured to achieve FRL
training based on the maximum FRL rate supported by the panel, source
and the PCON.
The approach is to add the support for FRL training between PCON and
HDMI2.1 sink and gradually add other blocks for supporting higher
resolutions and other HDMI2.1 features, that can be supported by pcon
for the sources that do not natively support HDMI2.1.
This is done before the DP Link training between the source and PCON
is started. In case of FRL training is not achieved, the PCON will
work in the regular TMDS mode, without HDMI2.1 feature support.
Any interruption in FRL training between the PCON and HDMI2.1 sink is
notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD
registers are read and FRL training is re-attempted.
Currently, we have tested the FRL training and are able to enable 4K
display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting
panel.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfdpndkt.fsf@intel.com
This patch parses HFVSDB fields for DSC1.2 capabilities of an
HDMI2.1 sink. These fields are required by a source to understand the
DSC capability of the sink, to set appropriate PPS parameters,
before transmitting compressed data stream.
v2: Addressed following issues as suggested by Uma Shankar:
-Added a new struct for hdmi dsc cap
-Fixed bugs in macros usage.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-4-ankit.k.nautiyal@intel.com
This patch parses MAX_FRL field to get the MAX rate in Gbps that
the HDMI 2.1 panel can support in FRL mode. Source need this
field to determine the optimal rate between the source and sink
during FRL training.
v2: Fixed minor bugs, and removed extra wrapper function (Uma Shankar)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
[Jani: Fixed checkpatch FROM_SIGN_OFF_MISMATCH, PARENTHESIS_ALIGNMENT.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-3-ankit.k.nautiyal@intel.com
Commit 991fcb77f4 ("drm/edid: Fix uninitialized variable in
drm_cvt_modes()") just replaced one warning with another.
The original warning about a possibly uninitialized variable was due to
the compiler not being smart enough to see that the case statement
actually enumerated all possible cases. And the initial fix was just to
add a "default" case that had a single "unreachable()", just to tell the
compiler that that situation cannot happen.
However, that doesn't actually fix the fundamental reason for the
problem: the compiler still doesn't see that the existing case
statements enumerate all possibilities, so the compiler will still
generate code to jump to that unreachable case statement. It just won't
complain about an uninitialized variable any more.
So now the compiler generates code to our inline asm marker that we told
it would not fall through, and end end result is basically random. We
have created a bridge to nowhere.
And then, depending on the random details of just exactly what the
compiler ends up doing, 'objtool' might end up complaining about the
conditional branches (for conditions that cannot happen, and that thus
will never be taken - but if the compiler was not smart enough to figure
that out, we can't expect objtool to do so) going off in the weeds.
So depending on how the compiler has laid out the result, you might see
something like this:
drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0()
and now you have a truly inscrutable warning that makes no sense at all
unless you start looking at whatever random code the compiler happened
to generate for our bare "unreachable()" statement.
IOW, don't use "unreachable()" unless you have an _active_ operation
that generates code that actually makes it obvious that something is not
reachable (ie an UD instruction or similar).
Solve the "compiler isn't smart enough" problem by just marking one of
the cases as "default", so that even when the compiler doesn't otherwise
see that we've enumerated all cases, the compiler will feel happy and
safe about there always being a valid case that initializes the 'width'
variable.
This also generates better code, since now the compiler doesn't generate
comparisons for five different possibilities (the four real ones and the
one that can't happen), but just for the three real ones and "the rest"
(which is that last one).
A smart enough compiler that sees that we cover all the cases won't care.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Noticed this when trying to compile with -Wall on a kernel fork. We
potentially don't set width here, which causes the compiler to complain
about width potentially being uninitialized in drm_cvt_modes(). So, let's
fix that.
Changes since v1:
* Don't emit an error as this code isn't reachable, just mark it as such
Changes since v2:
* Remove now unused variable
Fixes: 3f649ab728 ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com
We have a few displays in CI that always report their EDID as a bunch of
zeroes. This is consistent behaviour, so one assumes intentional
indication of an "absent" EDID. Flagging these consistent warnings
detracts from CI.
One option would be to ignore the zero EDIDs as intentional behaviour,
but Ville would like to keep the information available for debugging.
The simple alternative then is to reduce the loglevel for all the EDID
dumping from WARN to DEBUG so the information is present but not annoy
CI. Note that the bad EDID dumping is already only shown if
drm.debug=KMS, it's just the loglevel chosen was set to be caught by CI
if it ever occurred as it was expected to be an internal error not
external.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2203
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029213042.11672-1-chris@chris-wilson.co.uk
The name of the argument is different, causing those warnings:
./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic'
./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic'
Fixes: 7af655bce2 ("drm/dp: Add drm_dp_downstream_mode()")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7f4d6c3ff6df63ebd006eb90a5108006c23e2168.1603791716.git.mchehab+huawei@kernel.org
The name of the argument is different, causing those warnings:
./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic'
./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic'
Fixes: 7af655bce2 ("drm/dp: Add drm_dp_downstream_mode()")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922175357.42998-3-lyude@redhat.com
The downstream facing port caps in the DPCD can give us a hint
as to what kind of display mode the sink can use if it doesn't
have an EDID. Use that information to pick a suitable mode.
v2: Use Returns: for kdoc (Lyude)
Add kdocs for drm_display_mode_from_cea_vic() (Lyude)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-14-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larget cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
-
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages
-----BEGIN PGP SIGNATURE-----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=Yvtd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Apparently there are EDIDs in the wild with multiple DispID extension
blocks. Iterate through them all.
In one particular case the tile information is specicied in the
second DispID ext block, and since the current parser only looks
at the first DispID ext block we don't notice that we're dealing
with a tiled display.
While at it change a few functions to return void since we have
no use for the errno.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527130310.27099-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Apparently EDIDs with multiple DispID ext blocks is a thing, so prepare
for iterating through multiple ext blocks of the same type by
passing the starting ext block index to drm_find_edid_extension(). Well
also have drm_find_edid_extension() update the index to point to the
next ext block on success. Thus we should be able to call
drm_find_edid_extension() in loop.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527130310.27099-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
This counter will be used by drm_helper_probe_detect caller to determine
if anything had changed(including edid, connection status and etc).
Hardware specific driver detect hooks are responsible for updating this
counter when some change is detected to notify the drm part,
which can trigger for example hotplug event.
Also now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v2: Added documentation for the new counter. Rename change_counter to
epoch_counter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-3-kunal1.joshi@intel.com
Many drivers would benefit from using
drm helper to compare edid, rather
than bothering with own implementation.
v2: Added documentation for this function.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-2-kunal1.joshi@intel.com
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
-----BEGIN PGP SIGNATURE-----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=ZmKI
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
The drm_hdmi_avi_infoframe_from_display_mode(),
drm_hdmi_vendor_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range() functions take a drm_connector that
they don't modify. Mark it as const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-10-laurent.pinchart+renesas@ideasonboard.com
Let's just calculate the hsync rate on demand. No point in wasting
space storing it and risking the cached value getting out of sync
with reality.
v2: Move drm_mode_hsync() next to its only users
Drop the TODO
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com
The DispID DTD pixel clock is documented as:
"00 00 00 h → FF FF FF h | Pixel clock ÷ 10,000 0.01 → 167,772.16 Mega Pixels per Sec"
Which seems to imply that we to add one to the raw value.
Reality seems to agree as there are tiled displays in the wild
which currently show a 10kHz difference in the pixel clock
between the tiles (one tile gets its mode from the base EDID,
the other from the DispID block).
Cc: stable@vger.kernel.org
References: https://gitlab.freedesktop.org/drm/intel/-/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423151743.18767-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Currently the DispID tile block gets parsed in drm_get_edid(), which
is an odd place for it considering we parse nothing else there. Also
this doesn't work for override EDIDs since
drm_connector_update_edid_property() refuses to do its job twice
in such cases. Thus we never update the tile property with results
of the DispID tile block parsing during drm_get_edid().
To fix this let's just move the tile block parsing to happen during
drm_connector_update_edid_property(), which is where we parse a bunch
of other stuff as well (and where we update both the EDID and tile
properties).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313162054.16009-10-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Throw out the magic '5' from validate_displayid() and replace with
the actual thing we mean sizeof(header)+checksum. Also rewrite the
checksum loop to be less hard to parse for mere mortals.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313162054.16009-9-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Currently the code assumes that the entire EDID extesion block
can be taken up by the DispID blocks. That is not true. There
is at least always the DispID checksum, and potentially fill
bytes if the extension block uses the interior fill scheme
to pad out to fill EDID block size.
So let's not parse the checksum or the fill bytes as DispID
blocks by having drm_find_displayid_extension() return the
actual length of the DispID data to the caller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313162054.16009-7-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
As with the byte offset (idx) drm_find_displayid_extension() is
the only one who actually knows how much data the resulting DispID
block can contain. So return the length from therein instead of
assuming it's the EDID block length all over.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313162054.16009-5-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The fact that the DispID starts at byte offset 1 is due to
the DispID coming from and EDID extension block (the first byte
being the extesion block tag). Instead of hadrdocoding that idx==1
assumptions all over let's just have drm_find_displayid_extension()
return it since it actually knows what it's talking about.
If at some point someone comes across a DispID which is not embedded
inside an EDID the function that returns the new type of DispID
can return it's own byte offset without having to updated all the
code.
TODO: should probably just get rid of that idx thing altogether
and just return the thing we want directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313162054.16009-4-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, lift such variables up into the next code
block.
drivers/gpu/drm/drm_edid.c: In function ‘drm_edid_to_eld’:
drivers/gpu/drm/drm_edid.c:4395:9: warning: statement will never be
executed [-Wswitch-unreachable]
4395 | int sad_count;
| ^~~~~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
v2: move into function block instead being switch-local (Ville Syrjälä)
Signed-off-by: Kees Cook <keescook@chromium.org>
[danvet: keep the changelog]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/202003060930.DDCCB6659@keescook
Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers
v6:
* Call it monitor_range (Ville)
v5:
* Use the renamed flags
v4:
* Use is_display_descriptor() (Ville)
* Name the monitor range flags (Ville)
v3:
* Remove the edid parsing restriction for just DP (Nicholas)
* Use drm_for_each_detailed_block (Ville)
* Make the drm_get_adaptive_sync_range function static (Harry, Jani)
v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-2-manasi.d.navare@intel.com
The drm_display_info structure contains many fields related to HDMI
sinks, but none that identifies if a sink compliant with CEA-861 (EDID)
shall be treated as an HDMI sink or a DVI sink. Add such a flag, and
populate it according to section 8.3.3 ("DVI/HDMI Device
Discrimination") of the HDMI v1.3 specification.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-4-laurent.pinchart@ideasonboard.com
The hdmi_avi_infoframe_init() never needs to return an error, change its
return type to void.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-2-laurent.pinchart@ideasonboard.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5JsVQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHZEH+wddtJO4dZk5TZdF
KZB2w2ldsCvrBZAmas1TVvm8ncvUf+ATUZcSIzvZ3YbLmxsuLF2Cz3kD+n+36Mvy
ejwq8Scl7jwnouYps/Gfd6rRj/uCafqST4qp15GMGeiy2ST4A8dJrv5IAgZhD8/N
SN1bSr1AXpZ2JlEzzLDQ/NdVoNMS6IzCOsaINZcc60/XQoQZFRBWamMJFqu+CmXD
SBJOybQNFJhziy45cGZSAl+67sSCcoPftwTs0Stu4CJsvFWRb3MsbNTDS51Hjcc4
3tdgGOhoNXzyzZr96MEAHmiaW4VLQv0PGgUfOajE35viMz48OrwCTru8Kbuae3XM
YHV4qJk=
=yiem
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkpecgAKCRDj7w1vZxhR
xU4CAQD/8ZzfYroiiEI7FHEgvnuldGYZqA9kbNAO2Vueeac0OgD+Jojewdxy+pJ9
dxfA/POdtzx3hOdN+U1YgaDC0hbXwww=
=XgKq
-----END PGP SIGNATURE-----
Merge v5.6-rc2 into drm-misc-next
Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
I don't understand what the DispID CEA data block revision
means. The spec doesn't say. I guess some DispID must have
a value of >= 3 in there or else we generally wouldn't
even parse the CEA data blocks. Or does all this code
actually not do anything?
Cc: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-6-ville.syrjala@linux.intel.com
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
After much head scratching I managed to convince myself that
for_each_displayid_db() has already done the bounds checks for
the DispID CEA data block. Which is why we don't need to repeat
them in cea_db_offsets(). To avoid having to go through that
pain again in the future add a comment which explains this fact.
Cc: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-5-ville.syrjala@linux.intel.com
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Let's introduce is_detailed_timing_descritor() as the opposite
counterpart of is_display_descriptor().
Cc: Allen Chen <allen.chen@ite.com.tw>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-3-ville.syrjala@linux.intel.com
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Currently we assume any 18 byte descriptor to be a display descritor
if only the tag byte matches the expected value. But for detailed
timing descriptors that same byte is just the lower 8 bits of
hblank, and as such can match any display descriptor tag. To
properly validate that the 18 byte descriptor is in fact a
display descriptor we must also examine bytes 0-2 (just byte 1
should actually suffice but the spec does say that bytes 0 and
2 must also always be zero for display descriptors so we check
those too).
Unlike Allen's original proposed patch to just fix is_rb() we
roll this out across the board to fix everything.
Cc: Allen Chen <allen.chen@ite.com.tw>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-2-ville.syrjala@linux.intel.com
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
CEA-861 says :
"d = offset for the byte following the reserved data block.
If no data is provided in the reserved data block, then d=4.
If no DTDs are provided, then d=0."
So let's not look for DTDs when d==0. In fact let's just make that
<4 since those values would just mean that he DTDs overlap the block
header. And let's also check that d isn't so big as to declare
the descriptors to live past the block end, although the code
does already survive that case as we'd just end up with a negative
number of descriptors and the loop would not do anything.
Cc: Allen Chen <allen.chen@ite.com.tw>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-1-ville.syrjala@linux.intel.com
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Unlike DP 1.2 edid corruption test, DP 1.4 requires to calculate
real CRC value of the last edid data block, and write it back.
Current edid CRC calculates routine adds the last CRC byte,
and check if non-zero.
This behavior is not accurate; actually, we need to return
the actual CRC value when corruption is detected.
This commit changes this issue by returning the calculated CRC,
and initiate the required sequence.
Change since v7
- Fix for CI.CHECKPATCH
Change since v6
- Add return check
Change since v5
- Obtain real CRC value before dumping bad edid
Change since v4
- Fix for CI.CHECKPATCH
Change since v3
- Fix a minor typo.
Change since v2
- Rewrite checksum computation routine to avoid duplicated code.
- Rename to avoid confusion.
Change since v1
- Have separate routine for returning real CRC.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211160832.24259-1-Jerry.Zuo@amd.com
We depend on a specific relationship between the VIC number and the
index in the CEA mode arrays. Assert that the arrays have the expected
size to make sure we've not accidentally left holes in them.
v2: Pimp the BUILD_BUG_ON()s
v3: Fix typos (Manasi)
Cc: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-5-ville.syrjala@linux.intel.com
Now that the cea mode handling is not 100% tied to the single
array the dummy VIC 0 mode is pretty much pointles. Throw it
out.
v2: Rebase
Cc: Tom Anderson <thomasanderson@google.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-4-ville.syrjala@linux.intel.com
Reviewed-by: Thomas Anderson <thomasanderson@google.com>
Add a second table to the cea modes with VIC >= 193.
v2: Improve the comment for cea_modes_*[] to indicate
that one should always use cea_mode_for_vic() (Tom)
Cc: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Thomas Anderson <thomasanderson@google.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-3-ville.syrjala@linux.intel.com
We're going to need two cea mode tables (one for VICs < 128,
another one for VICs >= 193). To that end replace the direct
edid_cea_modes[] lookups with a function call. And we'll rename
the array to edid_cea_modes_0[] to indicate how it's to be
indexed.
v2: Fix typos (Tom)
Drop the pointless NULL checks in the loops (Tom)
Assign when declaring (Tom)
Improve the comment for cea_modes_*[] to indicate
that one should always use cea_mode_for_vic() (Tom)
Cc: Tom Anderson <thomasanderson@google.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213174348.27261-2-ville.syrjala@linux.intel.com
Reviewed-by: Thomas Anderson <thomasanderson@google.com>
[Why]
In hdmi_mode_alternate_clock(), it adds an exception for VIC 4
mode (4096x2160@24) due to there is no alternate clock defined for
that mode in HDMI1.4b. But HDMI2.0 adds 23.98Hz for that mode.
[How]
Remove the exception
v2: Adjust the comment description of hdmi_mode_alternate_clock()
due to there is no more exception for VIC 4 mode.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118101832.15487-2-Wayne.Lin@amd.com
[Why]
HDMI 2.0 adds aspect ratio attribute to distinguish different
4k modes. According to Appendix E of HDMI 2.0 spec, source should
use VSIF to indicate video mode only when the mode is one defined
in HDMI 1.4b 4K modes. Otherwise, use AVI infoframes to convey VIC.
Current code doesn't take aspect ratio into consideration while
constructing avi infoframe. Should modify that.
[How]
Inherit Ville Syrjälä's work
"drm/edid: Prep for HDMI VIC aspect ratio" at
https://patchwork.kernel.org/patch/11174639/
Add picture_aspect_ratio attributes to edid_4k_modes[] and
construct VIC and HDMI_VIC by taking aspect ratio into
consideration.
v2: Correct missing initializer error at adding aspect ratio of
SMPTE mode.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118101832.15487-1-Wayne.Lin@amd.com
It is fine for displays without audio functionality to not implement
CEA v3 extension in their EDID. Do not return an error in that case,
instead return 0 as if there was a CEA v3 extension with no audio or
speaker block.
This fixes the second half of bug fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115170736.7d88593d@endymion
Parroting Daniel's backmerge justification from
2e79e22e09:
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl2su/AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvm4H/1jkheCrvB/GJS69
wd18vizAg+eFmNCzxlGVhpQTKGymNRy+g6clnoli3cNJ3pSVKcYgVyB3oXaONIhp
g/ANudnBjTdjqYgJzfLij5AGecrGwDpF3YL0kuKrCB63s2I/HwQGYy/aPrYY8emy
gAYdaf1DGRu5/DIIB6soTo/TnpKoAyTE+XY5MaPSug++t/Flov19tlU40IZxXW94
bjTXbm0yklrsIx+LL5mYYGGnygSTCF66JjFg1qhDCBQaS2MZ21h1ZgaOtGZTwZcc
WgEiqLC5S1Iyj96zir1t78RcVQ4RzgvDbhUOgIqUFsYAO2wOicvxyFE3Hj8rPOKd
uGgVPRM=
=xgZa
-----END PGP SIGNATURE-----
Merge v5.4-rc4 into drm-next
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Some adjacent changes conflicts, plus some clashes in i915 due to
cherry-picking and git trying to be helpful and leaving both versions
in.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a function to fill the AVI infoframe bar information from
the standard tv margin properties.
Cc: Eric Anholt <eric@anholt.net>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008164814.5894-1-ville.syrjala@linux.intel.com
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Extract drm_mode_hdmi_vic() to correctly calculate the final HDMI
VIC for us. Currently this is being done a bit differently between
the AVI and HDMI infoframes. Let's get both to agree on this.
We need to allow the case where a mode is both 3D and has a HDMI
VIC. Currently we'll just refuse to generate the HDMI infoframe when
we really should be setting HDMI VIC to 0 and instead enabling 3D
stereo signalling.
If the sink doesn't even support the HDMI infoframe we should
not be picking the HDMI VIC in favor of the CEA VIC, because then
we'll end up not sending either VIC in the end.
Cc: Wayne Lin <waynelin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141914.20600-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Extract the logic to compute the final CEA VIC to a small helper.
We'll reorder it a bit to make future modifications more
straightforward. No function changes.
Cc: Wayne Lin <waynelin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141914.20600-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Refer to EDID 1.3 spec, display FEATURE (byte 18h) bit #0 said
"If this bit is set to 1, the display supports timings based on the
GTF standard using default GTF parameter values".
And EDID 1.4 spec shows "If bit 0 is set to 0, then the display
is noncontinuous frequency (multi-mode) and is only specified to accept
the video timing formats that are listed in BASE EDID and certain
EXTENSION Blocks.
When display feature did not support CVT or GFT2 and monitor's EDID version
greater than or equal to "1.2". DRM driver would select GTF as default
for standard timing calculation. It may generated some video timing
that can't display properly by external monitor.
For example. When driver retrieved "0xD1 0xFC" (FHD, 120Hz) and
"0xD1 0xE8" (FHD, 100Hz) from "Standard Timings". GTF formula
would generate video timing like below. It already over monitor's
spec to cause black screen issue.
"1920x1080" 120 368881 1920 2072 2288 2656 1080 1081 1084 1157 0x0 0x6
"1920x1080" 100 301992 1920 2072 2280 2640 1080 1081 1084 1144 0x0 0x6
v2: Just confirm GTF flag and omit the revision check.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007135127.9538-1-shawn.c.lee@intel.com
Add helper to check if a drm debug category is enabled. Convert drm core
to use it. No functional changes.
v2: Move unlikely() to drm_debug_enabled() (Eric)
v3: Keep unlikely() when combined with other conditions (Eric)
Cc: Eric Engestrom <eric@engestrom.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001140614.26909-1-jani.nikula@intel.com
Fill out our list of cea modes with the new stuff from CTA-861-G.
We only do the modes with VIC < 128 here. Adding the higher
numbered VICs will need some slight code refactoring first.
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711103234.6294-2-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
- it's what we recommend in our docs:
https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html#recommended-ioctl-return-values
- it's the overwhelmingly used error code for "operation not
supported", at least in drm core (slightly less so in drivers):
$ git grep EOPNOTSUPP -- drivers/gpu/drm/*c | wc -l
83
$ git grep ENOTSUPP -- drivers/gpu/drm/*c | wc -l
5
- include/linux/errno.h makes it fairly clear that these are for nfsv3
(plus they also have error codes above 512, which is the block with
some special behaviour ...)
/* Defined for the NFSv3 protocol */
If the above isn't reflecting current practice, then I guess we should
at least update the docs.
Noralf commented:
Ben Hutchings made this comment[1] in a thread about use of ENOTSUPP in
drivers:
glibc's strerror() returns these strings for ENOTSUPP and EOPNOTSUPP
respectively:
"Unknown error 524"
"Operation not supported"
So at least for errors returned to userspace EOPNOTSUPP makes sense.
José asked:
> Hopefully this will not break any userspace
None of the functions in drm_edid.c affected by this reach userspace,
it's all driver internal.
Same for the mipi function, that error code should be handled by
drivers. Drivers are supposed to remap "the hw is on fire" to EIO when
reporting up to userspace, but I think if a driver sees this it would
be a driver bug.
v2: Augment commit message with comments from Noralf and José
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andres Rodriguez <andresx7@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904143942.31756-1-daniel.vetter@ffwll.ch
DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.
This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.
This change fixes audio support for the Valve Index HMD.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Gj1MeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGctkH/0At3+SQPY2JJSy8
i6+TDeytFx9OggeGLPHChRfehkAlvMb/kd34QHnuEvDqUuCAMU6HZQJFKoK9mvFI
sDJVayPGDSqpm+iv8qLpMBPShiCXYVnGZeVfOdv36jUswL0k6wHV1pz4avFkDeZa
1F4pmI6O2XRkNTYQawbUaFkAngWUCBG9ECLnHJnuIY6ohShBvjI4+E2JUaht+8gO
M2h2b9ieddWmjxV3LTKgsK1v+347RljxdZTWnJ62SCDSEVZvsgSA9W2wnebVhBkJ
drSmrFLxNiM+W45mkbUFmQixRSmjv++oRR096fxAnodBxMw0TDxE1RiMQWE6rVvG
N6MC6xA=
=+B0P
-----END PGP SIGNATURE-----
Merge v5.2-rc5 into drm-next
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier
removal topic branch into drm-misc-next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We've moved the override and firmware EDID (simply "override EDID" from
now on) handling to the low level drm_do_get_edid() function in order to
transparently use the override throughout the stack. The idea is that
you get the override EDID via the ->get_modes() hook.
Unfortunately, there are scenarios where the DDC probe in drm_get_edid()
called via ->get_modes() fails, although the preceding ->detect()
succeeds.
In the case reported by Paul Wise, the ->detect() hook,
intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the
case reported by Ilpo Järvinen, there is no ->detect() hook, which is
interpreted as connected. The subsequent DDC probe reached via
->get_modes() fails, and we don't even look at the override EDID,
resulting in no modes being added.
Because drm_get_edid() is used via ->detect() all over the place, we
can't trivially remove the DDC probe, as it leads to override EDID
effectively meaning connector forcing. The goal is that connector
forcing and override EDID remain orthogonal.
Generally, the underlying problem here is the conflation of ->detect()
and ->get_modes() via drm_get_edid(). The former should just detect, and
the latter should just get the modes, typically via reading the EDID. As
long as drm_get_edid() is used in ->detect(), it needs to retain the DDC
probe. Or such users need to have a separate DDC probe step first.
The EDID caching between ->detect() and ->get_modes() done by some
drivers is a further complication that prevents us from making
drm_do_get_edid() adapt to the two cases.
Work around the regression by falling back to a separate attempt at
getting the override EDID at drm_helper_probe_single_connector_modes()
level. With a working DDC and override EDID, it'll never be called; the
override EDID will come via ->get_modes(). There will still be a failing
DDC probe attempt in the cases that require the fallback.
v2:
- Call drm_connector_update_edid_property (Paul)
- Update commit message about EDID caching (Daniel)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583
Reported-by: Paul Wise <pabs3@bonedaddy.net>
Cc: Paul Wise <pabs3@bonedaddy.net>
References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fi
Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References: 15f080f08d ("drm/edid: respect connector force for drm_get_edid ddc probe")
Fixes: 53fd40a90f ("drm: handle override and firmware EDID at drm_do_get_edid() level")
Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2a3 drm/edid: abstract override/firmware EDID retrieval
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Tested-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com
Abstract the debugfs override and the firmware EDID retrieval
function. We'll be needing it in the follow-up. No functional changes.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Tested-by: Paul Wise <pabs3@bonedaddy.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607110513.12072-1-jani.nikula@intel.com
From VESA EDID implementation guide v1.0:
"For EDID version 1 revision 2 or earlier data structures when offset 14h
bit 7 is set to one, the value of bits 6-0 are undefined, and therefore
cannot be interpreted to mean anything."
And since EDID 1.4 redefines that bit let's consult it only for
EDID 1.3.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110204.2384-2-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Give the "DFP 1.x" bit a proper name, and clean up the rest
of the bits defines as well.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110204.2384-1-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Fixes the following warnings:
../drivers/gpu/drm/drm_edid.c:4925: warning: Function parameter or member 'conn_state' not described in 'drm_hdmi_infoframe_set_hdr_metadata'
../drivers/gpu/drm/drm_edid.c:4925: warning: Excess function parameter 'hdr_metadata' description in 'drm_hdmi_infoframe_set_hdr_metadata'
Fixes: 2cdbfd66a8 ("drm: Enable HDR infoframe support")
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190523135504.184354-1-sean@poorly.run
ADD HLG EOTF to the list of EOTF transfer functions supported.
Hybrid Log-Gamma (HLG) is a high dynamic range (HDR) standard.
HLG defines a nonlinear transfer function in which the lower
half of the signal values use a gamma curve and the upper half
of the signal values use a logarithmic curve.
v2: Rebase
v3: Fixed a warning message
v4: Addressed Shashank's review comments
v5: Addressed Jonas Karlman's review comment and dropped the i915
tag from header.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-8-git-send-email-uma.shankar@intel.com
Enable Dynamic Range and Mastering Infoframe for HDR
content, which is defined in CEA 861.3 spec.
The metadata will be computed based on blending
policy in userspace compositors and passed as a connector
property blob to driver. The same will be sent as infoframe
to panel which support HDR.
Added the const version of infoframe for DRM metadata
for HDR.
v2: Rebase and added Ville's POC changes.
v3: No Change
v4: Addressed Shashank's review comments and merged the
patch making drm infoframe function arguments as constant.
v5: Rebase
v6: Fixed checkpatch warnings with --strict option. Addressed
Shashank's review comments and added his RB.
v7: Addressed Brian Starkey's review comments. Merged 2 patches
into one.
v8: Addressed Jonas Karlman review comments.
v9: Addressed Jonas Karlman review comments.
v10: Addressed Ville's review comments.
v11: Added BUILD_BUG_ON and sizeof instead of magic numbers as
per Ville's comments.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-5-git-send-email-uma.shankar@intel.com
HDR metadata block is introduced in CEA-861.3 spec.
Parsing the same to get the panel's HDR metadata.
v2: Rebase and added Ville's POC changes to the patch.
v3: No Change
v4: Addressed Shashank's review comments
v5: Addressed Shashank's comment and added his RB.
v6: Addressed Jonas Karlman review comments.
v7: Adressed Ville's review comments and fixed the issue
with length handling.
v8: Put the length check as per the convention followed in
existing code, as suggested by Ville.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-4-git-send-email-uma.shankar@intel.com
