b79f9f93eb
809583 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
e2f34e2671 |
xprtrdma: Yet another double DMA-unmap
While chasing yet another set of DMAR fault reports, I noticed that the frwr recycler conflates whether or not an MR has been DMA unmapped with frwr->fr_state. Actually the two have only an indirect relationship. It's in fact impossible to guess reliably whether the MR has been DMA unmapped based on its fr_state field, especially as the surrounding code and its assumptions have changed over time. A better approach is to track the DMA mapping status explicitly so that the recycler is less brittle to unexpected situations, and attempts to DMA-unmap a second time are prevented. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.20 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> |
||
|
|
8e143b90e4 |
IOMMU Updates for Linux v4.21
Including (in no particular order): - Page table code for AMD IOMMU now supports large pages where smaller page-sizes were mapped before. VFIO had to work around that in the past and I included a patch to remove it (acked by Alex Williamson) - Patches to unmodularize a couple of IOMMU drivers that would never work as modules anyway. - Work to unify the the iommu-related pointers in 'struct device' into one pointer. This work is not finished yet, but will probably be in the next cycle. - NUMA aware allocation in iommu-dma code - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver - Scalable mode support for the Intel VT-d driver - PM runtime improvements for the ARM-SMMU driver - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom - Various smaller fixes and improvements -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJcKkEoAAoJECvwRC2XARrjCCoQAJxsgaAF5Z0s7z8j2A9SkaGp SIMnUAI5mDOdyhTOAI+eehpRzg5UVYt/JjFYnHz8HWqbSc8YOvDvHafmhMFIwYvO hq5knbs6ns2jJNFO+M4dioDq+3THdqkGIF5xoHdGTP7cn9+XyQ8lAoHo0RuL122U PJGqX7Cp4XnFP4HMb3uQYhVeBV7mU+XqAdB+4aDnQkzI5LkQCRr74GcqOm+Rlnyc cmQWc2arUMjgc1TJIrex8dx9dT6lq8kOmhyEg/IjHeGaZyJ3HqA+30XDDLEExN0G MeVawuxJz40HgXlkXr+iZTQtIFYkXdKvJH6rptMbOfbDeDz+YZ01TbtAMMH9o4jX yxjjMjdcWTsWYQ/MHHdsoMP34cajCi/EYPMNksbycw+E3Y+X/bSReCoWC0HUK8/+ Z4TpZ9mZVygtJR+QNZ+pE9oiJpb4sroM10zTnbMoVHNnvfsO01FYk7FMPkolSKLw zB4MDswQYgchoFR9Z4ZB4PycYTzeafLKYgDPDoD1vIJgDavuidwvDWDRTDc+aMWM siIIewq19To9jDJkVjX4dsT/p99KVKgAR/Ps6jjWkAroha7g6GcmlYZHIJnyop04 jiaSXUsk8aRucP/CRz5xdMmaGoN7BsNmpUjcrquc6Povk/6gvXvpY04oCs1+gNMX ipL9E3GTFCVBubRFrksv =DT9A -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Page table code for AMD IOMMU now supports large pages where smaller page-sizes were mapped before. VFIO had to work around that in the past and I included a patch to remove it (acked by Alex Williamson) - Patches to unmodularize a couple of IOMMU drivers that would never work as modules anyway. - Work to unify the the iommu-related pointers in 'struct device' into one pointer. This work is not finished yet, but will probably be in the next cycle. - NUMA aware allocation in iommu-dma code - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver - Scalable mode support for the Intel VT-d driver - PM runtime improvements for the ARM-SMMU driver - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom - Various smaller fixes and improvements * tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits) iommu: Check for iommu_ops == NULL in iommu_probe_device() ACPI/IORT: Don't call iommu_ops->add_device directly iommu/of: Don't call iommu_ops->add_device directly iommu: Consolitate ->add/remove_device() calls iommu/sysfs: Rename iommu_release_device() dmaengine: sh: rcar-dmac: Use device_iommu_mapped() xhci: Use device_iommu_mapped() powerpc/iommu: Use device_iommu_mapped() ACPI/IORT: Use device_iommu_mapped() iommu/of: Use device_iommu_mapped() driver core: Introduce device_iommu_mapped() function iommu/tegra: Use helper functions to access dev->iommu_fwspec iommu/qcom: Use helper functions to access dev->iommu_fwspec iommu/of: Use helper functions to access dev->iommu_fwspec iommu/mediatek: Use helper functions to access dev->iommu_fwspec iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec iommu/dma: Use helper functions to access dev->iommu_fwspec iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec ACPI/IORT: Use helper functions to access dev->iommu_fwspec iommu: Introduce wrappers around dev->iommu_fwspec ... |
||
|
|
78e8696c23 |
dmaengine-4.21-rc1
dmaengine updates for v4.21-rc1 - New driver for UniPhier MIO DMA controller - Remove R-Mobile APE6 support - Sprd driver updates and support for cyclic link-list - Remove dma_slave_config direction usage from rest of drivers - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcKipaAAoJEHwUBw8lI4NH87kQAJF5tSQzvh4alAwntJ+rNZfw bgiUW29f7PxEzEGDsTBuFsw9zPhGxPnwtXzLm2iSDBGqkEcwKc+yretuX3Pgkce+ IpPkCBGcfXptSJxFz4XxBi3HCkZ+jlhy33pH+hkW/tA4SIcA+VJjfQLePiY3sVMO 1QUFDaL9NEyEfgJTmUShaPvCiz+3OHjY/3LAMlbLqQer4C9zC3iyvZIf9lvPQQnt qJaFuEiqlhw6eOAGw+2frMYDEV57QEiRgghBZyFm5RxG19XCcPkVV9id22rz5TQb +mQXhyaLvDiztWf71dFlXW2nW8mjewcjNU4h5g3RTyLA7fpLNcpMyZY2WizIADVS x6a7/HSrDjD4CN6pGDmRi8vvqkTAEDCsrfUM6K43rAsoZzU5elVJwOv4m8WB3CCF pRlUwFi6ENt8Ov8CWgCCaY0/Bzj1FgjN3BY87amBsI9wF4fkpCPNdWw34a6lg1Kf SzyPty8Z+i+6rtKps7Mh9VOZI2tryPJzyAWrcOCDWQoiR/RWzgC3y6SuwCdiyaDf 8hFV4xnB0oVJ8vsTjF1AgxVwEsqQ7TVTIsLAns6jEnTC5FAnOLd0iwh56a+rw+lR 7e1iuQYllZ1rdMi+r5gWG4OCsZehmZgCqc250om51tzA1SDVDQ3bbx8clxZeha80 AKr5MVrIVp7riYFEICvp =+pTt -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This includes a new driver, removes R-Mobile APE6 as it is no longer used, sprd cyclic dma support, last batch of dma_slave_config direction removal and random updates to bunch of drivers. Summary: - New driver for UniPhier MIO DMA controller - Remove R-Mobile APE6 support - Sprd driver updates and support for cyclic link-list - Remove dma_slave_config direction usage from rest of drivers - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers" * tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits) dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: pxa: remove DBGFS_FUNC_DECL() dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: Documentation: Add documentation for multi chan testing dmaengine: dmatest: Add transfer_size parameter dmaengine: dmatest: Add alignment parameter dmaengine: dmatest: Use fixed point div to calculate iops dmaengine: dmatest: Add support for multi channel testing dmaengine: rcar-dmac: Document R8A774C0 bindings dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave dmaengine: sprd: Add me as one of the module authors dmaengine: sprd: Support DMA 2-stage transfer mode dmaengine: sprd: Support DMA link-list cyclic callback dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel dmaengine: sprd: Fix the last link-list configuration dmaengine: sprd: Get transfer residue depending on the transfer direction dmaengine: sprd: Remove direction usage from struct dma_slave_config dmaengine: dmatest: fix a small memory leak in dmatest_func() ... |
||
|
|
fcf010449e |
kgdb patches for 4.20-rc1
Mostly clean ups although whilst Doug's was chasing down a odd
lockdep warning he also did some work to improved debugger resilience
when some CPUs fail to respond to the round up request.
The main changes are:
* Fixing a lockdep warning on architectures that cannot use an NMI for
the round up plus related changes to make CPU round up and all CPU
backtrace more resilient.
* Constify the arch ops tables
* A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope
(and directly related to kgdb). Didn't get comprehensive acks but
all impacted maintainers were Cc:ed in good time.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Aqlc
-----END PGP SIGNATURE-----
Merge tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Mostly clean ups although while Doug's was chasing down a odd lockdep
warning he also did some work to improved debugger resilience when
some CPUs fail to respond to the round up request.
The main changes are:
- Fixing a lockdep warning on architectures that cannot use an NMI
for the round up plus related changes to make CPU round up and all
CPU backtrace more resilient.
- Constify the arch ops tables
- A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope (and
directly related to kgdb). Didn't get comprehensive acks but all
impacted maintainers were Cc:ed in good time"
* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
mips/kgdb: prepare arch_kgdb_ops for constness
kdb: use bool for binary state indicators
kdb: Don't back trace on a cpu that didn't round up
kgdb: Don't round up a CPU that failed rounding up before
kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
kgdb: Remove irq flags from roundup
|
||
|
|
fbea8c7c79 |
OpenRISC updates for 4.21
Just one change for 4.21: - Update comments for name change or32 -> or1k from Geert Uytterhoeven -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcKpJrAAoJEMOzHC1eZifkDC4QAJCia7c68WOSv6AfCPkf4dNQ xAnBB4iMn041QnmXm90XVx5IVrupNrtUVWqqwGqD6R7FuRQDbz+LpKY6jRSUDQpk E7HgFmvUbjU9WOUFqPClZ9hu/5NdnrcmXsV9fld4nUwMpIjay2ehgDFQlf/PZoSo P2Mh4WBVY+3ARSrEqtDxkFKlYushvueVjJLofRwjjb3CdryY9pQEyf521K94DUeS UUFSxZTXgHHRn3jXaMiXsIp5PXL/XOics1D1u+n/8/hBiMOKo/j/+byFmmF3LU15 jz7P1XUSZ/UI6Ulkwh9GSQWKMrxTbPSQvEExHqtLx5fgITKOhNxeBAh+c9Kzt8a0 pWsMioBsvDlZ07i9kfhpCfMZMzxLDy8c7aiCSthxSeKNPf5+NTJE3Z+7glyUT12s u8m4FnTHGsbnfQgRt3GwNRLpp/Mhp7SNqgKGw2xRR2EbsxBooQeycdkoldW2EoBW bL6DGXFIivsf1iuonDeybV/FMGeeV/3IwXKGzatwjkirgkbbB9gDH1gCCJOpUwC5 PWjxQw+4OL4/7z9bvnCCH75hYg0MjcLfxdJfczJfRLaSL2xyfyrmt0mav4Xs06rQ NNGfX8Yl7BQgxf6jVB/jRL33GXx/lpE/J5XT7i3T917T0bOhfuhQJJoo2+15lc/M uxEES4JraL6NXCkr06dv =bY+D -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://github.com/openrisc/linux Pull OpenRISC update from Stafford Horne: "Just one change for 4.21: Update comments for name change or32 -> or1k from Geert Uytterhoeven" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Fix broken paths to arch/or32 |
||
|
|
28e8c4bc8e |
RTC for 4.21
Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Drivers: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlwqU44ACgkQAyWl4gNJ NJJjGxAAgQMTkarMx16icKpN35iuXgwZdIKKmWIHGyCJeB1ykHS8TgwkP+4pE1aN UwTw6x9TBxa9KpuexCgrx8/zppM0i1jacaxJkDbrj1OBPAlGrbJrwcSH029qHAu6 N1Oo0GvAIPlEmIJkKVWkgZhGqUwvMvcy2amk06S92PPOIfr5zJsRzNmduEE7bpcl 86EckuFOp9c1p4IayeQhIT+GHPtum4WkmGVw3+j0j/E6aCUD3thLohT+KuGfzzKn jHbtZ+/d17etKtxxI26YrmixH603t66ZSuc64rSvKRKYR8u/qqR3ZTotYVonsPHj NNQsWiNRzwkpiN9n1Big0tLJyXJ6qbYQIrJLMc19Jr10tS815WF5rjmNinfdSazX 4xucIJpMh7VgA3W5BpvN1+UEahiznp2QGiLjauoruMrB7XUUSLPv6VohFiKAfd9S 7SyV2moPWVnj4pJPH6Af2zVLE9YyPoWGvUSwosLZKhpoFNLOnVZAU0vo32M/23wv ejv4YPhtqxqT94XUyrWKE1DaTpxMqBHcHj2ThV+NGCWe4C0+KfW0zmbKm1X588UJ ZhmGODV9acU+46It5mFoE2Zb9WPyEwljjxbvXKQZhdONKIoZ6lz1i7nzy6C2qerQ ZW5baiaCvQ5e/NyWLxEZwvHukBo2OBxkXe8isuk/wz+7Qyw3l34= =5He5 -----END PGP SIGNATURE----- Merge tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ... |
||
|
|
c9bef4a651 |
Pin control bulk changes for the v4.21 kernel cycle:
No core changes this time.
New drivers:
- NXP (ex Freescale) i.MX 8 QXP SoC driver.
- Mediatek MT6797 SoC driver.
- Mediatek MT7629 SoC driver.
- Actions Semiconductor S700 SoC driver.
- Renesas RZ/A2 SoC driver.
- Allwinner sunxi suniv F1C100 SoC driver.
- Qualcomm PMS405 PMIC driver.
- Microsemi Ocelot Jaguar2 SoC driver.
Improvements:
- Some RT improvements (using raw spinlocks where appropriate).
- A lot of new pin sets on the Renesas PFC pin controllers.
- GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
chips, and Xway.
- Major modernization of the Intel pin control drivers.
- STM32 pin control driver will now synchronize usage of pins
with another CPU using a hardware spinlock.
-----BEGIN PGP SIGNATURE-----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=cm6m
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have no core changes but lots of incremental development in drivers
all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
keep churning out new SoCs.
I have some subtree maintainers for Renesas and Intel helping out to
keep down the load, it's been working smoothly (Samsung also have a
subtree but it was not used this cycle.)
New drivers:
- NXP (ex Freescale) i.MX 8 QXP SoC driver.
- Mediatek MT6797 SoC driver.
- Mediatek MT7629 SoC driver.
- Actions Semiconductor S700 SoC driver.
- Renesas RZ/A2 SoC driver.
- Allwinner sunxi suniv F1C100 SoC driver.
- Qualcomm PMS405 PMIC driver.
- Microsemi Ocelot Jaguar2 SoC driver.
Improvements:
- Some RT improvements (using raw spinlocks where appropriate).
- A lot of new pin sets on the Renesas PFC pin controllers.
- GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
chips, and Xway.
- Major modernization of the Intel pin control drivers.
- STM32 pin control driver will now synchronize usage of pins with
another CPU using a hardware spinlock"
* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
pinctrl: imx-scu: Depend on IMX_SCU
pinctrl: ocelot: Add dependency on HAS_IOMEM
pinctrl: ocelot: add MSCC Jaguar2 support
pinctrl: bcm: ns: support updated DT binding as syscon subnode
dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
MAINTAINERS: merge at91 pinctrl entries
pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
pinctrl: uniphier: constify uniphier_pinctrl_socdata
pinctrl: mediatek: improve Kconfig dependencies
pinctrl: msm: mark PM functions as __maybe_unused
dt-bindings: pinctrl: sunxi: Add supply properties
pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
...
|
||
|
|
115502a6f3 |
linux-watchdog 4.21-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAlwopYUACgkQ+iyteGJfRsqOZwCfXM0u0XQJS6TZFtEOZp5gKq+d f/4AnRXcblmb1wJiEVItizB03leOWHqk =jry0 -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add TQ-Systems TQMX86 watchdog driver - add Qualcomm PM8916 watchdog driver - w83627hf_wdt: add quirk for Inves system - renesas_wdt: several improvements and document r8a774c0 support - mena21_wdt, mtx-1: Convert to use GPIO descriptor - bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE - documentation: add PM usage and kernel-api: don't reference removed functions - update bindings for MT7629 SoC - several small fixes * tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: tqmx86: Add watchdog driver for the IO controller dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support watchdog: docs: kernel-api: don't reference removed functions watchdog: add documentation for PM usage watchdog: mtx-1: Convert to use GPIO descriptor watchdog: mena21_wdt: Convert to GPIO descriptors dt-bindings: watchdog: Add Qualcomm PM8916 watchdog watchdog: Add pm8916 watchdog driver dt-bindings: watchdog: update bindings for MT7629 SoC watchdog: renesas_wdt: don't keep timer value during suspend/resume watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE watchdog: asm9260_wdt: make array mode_name static, shrinks object size watchdog/hpwdt: Update driver version. watchdog/hpwdt: Do not claim unsupported hardware watchdog/hpwdt: Exclude via blacklist Watchdog: remove outdated comment watchdog: w83627hf_wdt: Add quirk for Inves system watchdog: cpwd: add of_node_put() watchdog: renesas_wdt: don't set divider while watchdog is running ... |
||
|
|
57b0e31453 |
KEYS: fix parsing invalid pkey info string
We need to check the return value of match_token() for Opt_err before doing anything with it. [ Not only did the old "-1" value for Opt_err cause problems for the __test_and_set_bit(), as fixed in commit |
||
|
|
e1ef035d27 |
ARM: SoC defconfig updates
Most changes here are to enable new drivers and platforms in the various configs that affect them. Most of these have been covered and described in the other branches, we mostly keep defconfig separate to avoid conflicts between SoC/dt/driver updates that they otherwise would be grouped with. One thing worth mentioning here is that OMAP changes from using their own UART driver, to 8250, for the multi_v7_defconfig shared config on 32-bit. This means that the console is now named ttyS* instead of ttyO*. This change was already done for omap2_defconfig a while back, so most users of these configs have either already updated, or can easily follow the same patterns as they did at that time. This makes platform support slightly easier for distros, since they no longer need to keep track of a separate console prefix for these platforms. -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqg+4PHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3nHcQAKrzSPsi3NWZHAIyP9Gcsu/mqebeB7ATnUVB EfsYl+0ZLwZjex2pI7YmDih4QgOui3caOYU3rlqcu+zTSXYp03GnzA/fuW/aOBr3 Y4UYQcUIJULJyYzE14y5MhYxMfedF5U4yfayQj/6Xn4dojSICb19/CxD7lEtxUBQ DqYizTnR5ABRVDnRXmgo0TcHCSa05xP5Hn48DL02fJUc1oHzv3RoH2MrC4j4a2QO k0INYeq9cRFv9kcuz4S0VRXDvpA6cLsa9RZ8I3eJ+tpDFK8HmNyrij98CQLBwb/S UzuC+DvD5MdJsf6Tp15enXIKtLKBtEQiXVncX5dCFLGW+lfZb0FyMa6Q4herGEL3 NLifwcxDwiATKJkGuQKJHhCnMVGanUz+fn+7nXbHtloOsR/2ttofaTFCCURN0Pr+ oIa79JSd58SES+Rqz7V17r08SuK5iMjF8XENDMuim095WIt2ysoKW7P11eq/CjNf qheaiBK/ANHeYaVLb6OG7V5SMjsxWYcUfvwONiA5Qs1HbjiOXamUBOAiBF8zMBZc rd21X2kqVpfU/IDgqhWTEawtl76gh9+1uCbbL5l+qiwyFfRw0b/9pakMs3szgD+v 2w49p/WwOQQoxzV5jCBlo36ZzKISrKGnTEQhRadtxCPPnrg/8emUNU6S/aHB2OmH x1Vehuja =65qL -----END PGP SIGNATURE----- Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Olof Johansson: "Most changes here are to enable new drivers and platforms in the various configs that affect them. Most of these have been covered and described in the other branches, we mostly keep defconfig separate to avoid conflicts between SoC/dt/driver updates that they otherwise would be grouped with. One thing worth mentioning here is that OMAP changes from using their own UART driver, to 8250, for the multi_v7_defconfig shared config on 32-bit. This means that the console is now named ttyS* instead of ttyO*. This change was already done for omap2_defconfig a while back, so most users of these configs have either already updated, or can easily follow the same patterns as they did at that time. This makes platform support slightly easier for distros, since they no longer need to keep track of a separate console prefix for these platforms" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO" arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE arm64: defconfig: Regenerate for v4.20 ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver ARM: multi_v7_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver ARM: exynos_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers ARM: imx_v6_v7_defconfig: add imx7ulp support ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX ARM: multi_v7_defconfig: enable STM32 analog & timer drivers arm64: defconfig: Enable GCC and PINCTRL for MSM8998 arm64: defconfig: Enable core Qualcomm SDM845 options ARM: defconfig: Enable the PL111 DRM driver on vexpress ARM: defconfig: Update the vexpress defconfig arm64: defconfig: Enable some qcom remoteproc configs arm64: defconfig: Enable QCS404 configs ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES ARM: imx_v6_v7_defconfig: Enable BT_BNEP ... |
||
|
|
b7badd1d7a |
ARM: Device-tree updates
As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqgVYPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3ybAQAKAhd7XI5oY/wgdZZmxwcX+p7sU6LXeIlpWU XsPN1c14KU0siQv/znVA5OpF+fgn9eRqfWnMoDPlvdScTq07FM2NBmOJfVJYDPJa uvsll5m+84FCYanIR//YybS0tCM0b0BHoHo2DoyIxWeAwmw7BBVslddBdNg6R7hG S9rU9rUeqfCj7HbcPLqVn0DecMtEe7R8zmDtG1CSMqrhncifmoV4gtUnbYAg0GGT cSvj/zT8A1j0oJcU2Upl/Fr+7WJ7XB9pnku91nUOSXLv5VkyctLGomKq5F7O2/Xs 2DhpH2yKwQt7S7TDiDd0jy64Of6+Xup35wEHevCeKrzGXcVRqqHwCkanLz9FdjVt yg4UrI/P1nY7h4ifZPplgigv+kA+IjRGiMrTRIEgSE5YK9U5AYkgembTWksRDikd 5EpeJcMj2tBv4SDellNNtzh6GGTPBf3GJw3P9uRuxnQY/T31N2eX0XGeRikL+Lzf 9nbQdJealmql3rCa5oFEJwSxrSaAv/ub7/294kPdEmXj8+3qUuH3hZAZOI9LSXGW GCuxsgccB2GF1M48x48/QpHgxb93okyXmndONZnU8uN8ba0zS4b8QLwvIY5rqv5Z kqD1VPBQf9kGVyzDyABRjFmGCDJcoOJf4QrzvNk9+xo8fXVk1xNtxu4MUsHvc2lS cU2RYWm/ =sFVi -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ... |
||
|
|
d36377c6eb |
ARM: SoC driver updates
Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
+ misc cleanups across several platforms
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqd4APHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3HXoP/icWJTGrbf9R6T7r0RWB3xeV8ouTPMM8YM5C
6wD4LkkjgZ16Hz/ellJ0Oug77LdnJ/ZI7jH2u0IcKRXr4sL94hEo11jAJLLtCHpt
rGiItMuEDMhNFcAK/yREI6FtRqjNZhsTuR+gkcjzMnGLCaTA1+RwQNdugH0hh0fF
z8C6tjN+fRIeS0wInBzR/402GcgRU0DIJrr0kmklS0u6tc2QW24ffv8ymvMiVO46
l8VemmdxVZsBU2iehraPy6mSXsyTm04dNTuHnrIw3nE3kTJF7jMvpqI/euU1eZl6
6EzrrCym8nC66IlqhHMBB427PK8sRqJTqwqSXO6e90AqiK4H2bMovXKiob/Psq+e
yWqPOrAr8YBLqTgauvCzVm/xneT5rZM4N0BYhOk172Uk52qenNWDnqHj41A4CMSM
/id3L1cHs5nf2qwuMncXvLX+Y2vO2n6cMmF8cDRLu592OBZRcVepUM0xoaSdZScv
LJsP3jH3RRcY3L2rf7bY2Mitp48bDgZMZdw/viSHsFS+SVr225uNFALFDQ9kNEoZ
2d9i9IvC7xOMhdVAX03U7DuRcpKXBPcv+arA57PiVvR4M1HeU7VvD4ayP5loVX2J
GoDIKiPQitAsOKzyPyZ5Jw04lxio3xZbrbmmVzEH8uKWIV5omdiMnSrFsEfduRCT
rU+Mqe2j
=yEX2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
|
||
|
|
0922275ef1 |
ARM: SoC platform updates
SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups
- SoCFPGA adds explicit selection of ARM errata and removes some unused code
This tag also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release.
-----BEGIN PGP SIGNATURE-----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=m7me
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
console setups
- SoCFPGA adds explicit selection of ARM errata and removes some
unused code
This also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: omap2: avoid section mismatch warning
ARM: tegra: avoid section mismatch warning
ARM: ks8695: fix section mismatch warning
ARM: pxa: avoid section mismatch warning
ARM: mmp: fix pxa168_device_usb_phy use on aspenite
ARM: mmp: fix timer_init calls
ARM: OMAP1: fix USB configuration for device-only setups
ARM: OMAP1: add MMC configuration for Palm Tungsten E
ARM: imx: fix dependencies on imx7ulp
ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
ARM: imx: add initial support for imx7ulp
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: davinci: da850-evm: remove unnecessary include
...
|
||
|
|
cac1fc8fb5 |
Merge branch 'fixes' into next/soc
Merge in fixes here, since the last batch didn't make it in before the release of 4.20, and we might as well group them with this set of patches. * fixes: (822 commits) arm64: dts: renesas: draak: Fix CVBS input ARM: dts: Fix OMAP4430 SDP Ethernet startup ARM: dts: am335x-pdu001: Fix polarity of card detection input ARM: OMAP1: ams-delta: Fix audio permanently muted ARM: dts: omap5: Fix dual-role mode on Super-Speed port arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K" ARM: dts: imx7d-pico: Describe the Wifi clock ARM: dts: realview: Fix some more duplicate regulator nodes MAINTAINERS: update entry for MMP platform ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt MAINTAINERS: mediatek: Update SoC entry ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs + Linux 4.20-rc5 Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
|
495d714ad1 |
Tracing changes for v4.21:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure.
This will allow for multiple users of hooking onto functions
to get the callback (return) of the function. This is the ground
work for having kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently
is a similar function strstart() that is used in a few places, but
only returns a bool and not a length. These instances will be
removed in the future to use str_has_prefix() instead.
- A few other various clean ups as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXCawlBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhbcAQCFeT0fWWTUxofBQz5jqsHaRnVg21+9
X4sTldYRYEn4YgEAmWOyiwq7zvrsAu4ZwkNBMeqxn3tVymYHiGOGe3Y4BAw=
=u96o
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure. This
will allow for multiple users of hooking onto functions to get the
callback (return) of the function. This is the ground work for having
kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently is
a similar function strstart() that is used in a few places, but only
returns a bool and not a length. These instances will be removed in
the future to use str_has_prefix() instead.
- A few other various clean ups as well.
* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
tracing: Use the return of str_has_prefix() to remove open coded numbers
tracing: Have the historgram use the result of str_has_prefix() for len of prefix
tracing: Use str_has_prefix() instead of using fixed sizes
tracing: Use str_has_prefix() helper for histogram code
string.h: Add str_has_prefix() helper function
tracing: Make function ‘ftrace_exports’ static
tracing: Simplify printf'ing in seq_print_sym
tracing: Avoid -Wformat-nonliteral warning
tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
tracing: Add hist trigger comments for variable-related fields
tracing: Remove hist trigger synth_var_refs
tracing: Use hist trigger's var_ref array to destroy var_refs
tracing: Remove open-coding of hist trigger var_ref management
tracing: Use var_refs[] for hist trigger reference checking
tracing: Change strlen to sizeof for hist trigger static strings
tracing: Remove unnecessary hist trigger struct field
tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
seq_buf: Use size_t for len in seq_buf_puts()
seq_buf: Make seq_buf_puts() null-terminate the buffer
arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
...
|
||
|
|
f12e840c81 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha architecture updates from Matt Turner: "A few small changes for alpha as well as the new system call table generation support from Firoz Khan" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: Remove some unused variables alpha: rtc: simplify alpha_rtc_init alpha: Fix a typo on ptrace.h alpha: fix spelling mistake QSD_PORT_ACTUVE -> QSD_PORT_ACTIVE alpha: generate uapi header and syscall table header files alpha: add system call table generation support alpha: add __NR_syscalls along with NR_SYSCALLS alpha: remove CONFIG_OSF4_COMPAT flag from syscall table alpha: move __IGNORE* entries to non uapi header |
||
|
|
e3ed513bcf |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"This is a revert for a lockup in cgroups-intense workloads - the real
fixes will come later"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix infinite loop in update_blocked_averages() by reverting
|
||
|
|
2a1a2c1a76 |
dax fix 4.21
* Clean up unnecessary usage of prepare_to_wait_exclusive() -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcJ8sYAAoJEB7SkWpmfYgCdJ8QAJ6uPXu26SOfwew3MITNfNGO 8VXnjDlOq8mi9u51xPeurcT+4h3g1AiEMGl6ugI8Jxx704a4/P80fnAjVTmYvugy 7Ub29tTpqFPaermaT2N/K4zyqZxo/ozo5k1q3EqvNYc2IIBDlHKwKcirQpTqzIJ/ hv8sgLLf/f9J6CtBNSXeGfsV6DKp8bmqXvSGzSsphhbkcW/i1UMCey5rXN5iIT4/ gSdSeLxP6asjzeGm1/sC1G6g3Pi6USVmWe6Cs7dMbPSgkmzpGirkobmx+e34npBQ gmabFMxaClPCar2vAGorhPbtXu5uZrHCURirVpMvmIj9MJlK/8uX4kbgn6r6N5nS hZRZlnIvvjfucb66xCyFE/1I2xL7iIdOlcLSyG4f6bGAZTmupFGGOsoyf+BQSeT0 08n4rvmBWQ/thUXAzkR4yUu77zRmQkmwbTjnOXUv4GNocvMoUcLwazh1QeY8W2rW RnUkk8B3iEgjfpKrjok/6MWd8qokwUVozOKUSVvKc8MEMraPVNzQMDKIl0hWUuE5 kjF+YXv+qozYvLR7IToqx+2TZp6VcZUujV5qof05nPQGHIztkwHIKZg7EimZe8qa hKZA2X+1XOv2EGYLq5XexxR8rehiqgH7HlaMwuQBYqEnmkTx4tVWHwax2+vzVnVh UcpyHRN2RFwPWIIUTaeN =2anQ -----END PGP SIGNATURE----- Merge tag 'dax-fix-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax fix from Dan Williams: "Clean up unnecessary usage of prepare_to_wait_exclusive(). While I feel a bit silly sending a single-commit pull-request there is nothing else queued up for dax this cycle. This change has shipped in -next for multiple releases" * tag 'dax-fix-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Use non-exclusive wait in wait_entry_unlocked() |
||
|
|
9ab97aea85 |
f2fs-for-4.21-rc1
In this round, we've focused on bug fixes since Pixel devices have been shipping with f2fs. Some of them were related to hardware encryption support which are actually not an issue in mainline, but would be better to merge them in order to avoid potential bugs. Enhancement: - do GC sub-sections when the section is large - add a flag in ioctl(SHUTDOWN) to trigger fsck for QA - use kvmalloc() in order to give another chance to avoid ENOMEM Bug fix: - fix accessing memory boundaries in a malformed iamge - GC gives stale unencrypted block - GC counts in large sections - detect idle time more precisely - block allocation of DIO writes - race conditions between write_begin and write_checkpoint - allow GCs for node segments via ioctl() There are various clean-ups and minor bug fixes as well. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAlwmkzcACgkQQBSofoJI UNLIlw//RUd8rH8VMW/BcXQ3fwB8qFCk296cIVlWQu12BV7vmMKY886Sc+C9uAuR 9Lze4D6Iyg1k2KLkaWKhnE2E4ZWQ2O5zVf11r4amm1bN9glPJAKfLWbenJhMfeGa IdWo1ksntxgjfqLim2QlGSv5cBUjEo8zf32D446BbQURQMD/mm/lndywItS5vTx1 2eGKJ3pSXX6geFzyf1pD/wmC/7j6roKaTKAIMBagIuINNukeHctT/gRfklmYmOFC lRbXlsYhjIfGln6gktY6r4qyZbouOMad2fDl+dkp+UewQM4/2xLUaMqiN2eqd7Hr cag9LGe80MGgWwesqS6VOJHQviOlNd78Ie//iO1+ZsaIxKrvgzocRSDdxZswv+Vq reZNsEKH0s4/0ik9hiprW1NdQLvtg7e/UWPyrRvVRlDVitW/BXOWRBpGVgkdg01K OmAxNrVcr2+Gxp8jZL7M+rQdpApL/ms31x9HE/8u5ABBZfmCy3zhpICTZ6Hdngp1 3iUi2PvKUg+Y7KgII1nK2HLDpmZZ5UkLm8NhxLI0ntBWExjQjOBasOxPJf4en/UR TAtK3ozNKim3fQ01NCBy3B8WMKRtovxLK6PgqNPROJparlKJ3FEHnPIrYKglDUPg sxWCm1gFSraRGP86TaeGeD+v+PP6erI9CTaf6F/U3pWFgIpHoPg= =NEns -----END PGP SIGNATURE----- Merge tag 'f2fs-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've focused on bug fixes since Pixel devices have been shipping with f2fs. Some of them were related to hardware encryption support which are actually not an issue in mainline, but would be better to merge them in order to avoid potential bugs. Enhancements: - do GC sub-sections when the section is large - add a flag in ioctl(SHUTDOWN) to trigger fsck for QA - use kvmalloc() in order to give another chance to avoid ENOMEM Bug fixes: - fix accessing memory boundaries in a malformed iamge - GC gives stale unencrypted block - GC counts in large sections - detect idle time more precisely - block allocation of DIO writes - race conditions between write_begin and write_checkpoint - allow GCs for node segments via ioctl() There are various clean-ups and minor bug fixes as well" * tag 'f2fs-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (43 commits) f2fs: sanity check of xattr entry size f2fs: fix use-after-free issue when accessing sbi->stat_info f2fs: check PageWriteback flag for ordered case f2fs: fix validation of the block count in sanity_check_raw_super f2fs: fix missing unlock(sbi->gc_mutex) f2fs: fix to dirty inode synchronously f2fs: clean up structure extent_node f2fs: fix block address for __check_sit_bitmap f2fs: fix sbi->extent_list corruption issue f2fs: clean up checkpoint flow f2fs: flush stale issued discard candidates f2fs: correct wrong spelling, issing_* f2fs: use kvmalloc, if kmalloc is failed f2fs: remove redundant comment of unused wio_mutex f2fs: fix to reorder set_page_dirty and wait_on_page_writeback f2fs: clear PG_writeback if IPU failed f2fs: add an ioctl() to explicitly trigger fsck later f2fs: avoid frequent costly fsck triggers f2fs: fix m_may_create to make OPU DIO write correctly f2fs: fix to update new block address correctly for OPU ... |
||
|
|
0ad30ff67b |
nfs: fixed broken compilation in nfs_callback_up_net()
Patch fixes compilation error in nfs_callback_up_net()
serv->sv_bc_enabled is defined under enabled CONFIG_SUNRPC_BACKCHANNEL,
however nfs_callback_up_net() can access it even if this config option
was not set.
Fixes:
|
||
|
|
660611827c | Merge branch 'topic/xilinx' into for-linus | ||
|
|
69ca36b3d6 | Merge branch 'topic/uniphier' into for-linus | ||
|
|
990beed934 | Merge branch 'topic/sprd' into for-linus | ||
|
|
f782086a49 | Merge branch 'topic/sh' into for-linus | ||
|
|
56e8e1a118 | Merge branch 'topic/sa11x0' into for-linus | ||
|
|
68ded1dcd1 | Merge branch 'topic/mtk' into for-linus | ||
|
|
23a1bff764 | Merge branch 'topic/imx' into for-linus | ||
|
|
b7ff66ca30 | Merge branch 'topic/ep93xx' into for-linus | ||
|
|
010299bfc2 | Merge branch 'topic/dw' into for-linus | ||
|
|
466e601a68 | Merge branch 'topic/dmatest' into for-linus | ||
|
|
77ee1aacdd | Merge branch 'topic/dirn_remove' into for-linus | ||
|
|
5f443256e3 | Merge branch 'topic/coh' into for-linus | ||
|
|
7c2269e958 | Merge branch 'topic/bcm' into for-linus | ||
|
|
36e14f5fdf |
rtc: rename core files
Rename core files so there is a clearer separation between the RTC core and the RTC drivers. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
|
fea170804b |
cifs: update internal module version number
To version 2.15 Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
|
e77fe73c7e |
cifs: we can not use small padding iovs together with encryption
We can not append small padding buffers as separate iovs when encryption is used. For this case we must flatten the request into a single buffer containing both the data from all the iovs as well as the padding bytes. This is at least needed for 4.20 as well due to compounding changes. CC: Stable <stable@vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
|
bba3d2daa8 |
rtc: nvmem: fix possible use after free
In cas of probe failure, devres may free the memory allocated for
rtc->nvram before devm_rtc_release_device() is called. This leads to
rtc_nvram_unregister using it after being freed which may lead to a crash.
This has been shown to happen after commit
|
||
|
|
c40f7d74c7 |
sched/fair: Fix infinite loop in update_blocked_averages() by reverting a9e7f6544b
Zhipeng Xie, Xie XiuQi and Sargun Dhillon reported lockups in the scheduler under high loads, starting at around the v4.18 time frame, and Zhipeng Xie tracked it down to bugs in the rq->leaf_cfs_rq_list manipulation. Do a (manual) revert of: |
||
|
|
cc0282975b |
kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
checkpatch.pl reports the following: WARNING: struct kgdb_arch should normally be const #28: FILE: arch/mips/kernel/kgdb.c:397: +struct kgdb_arch arch_kgdb_ops = { This report makes sense, as all other ops struct, this one should also be const. This patch does the change. Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> |
||
|
|
911b7afdeb |
mips/kgdb: prepare arch_kgdb_ops for constness
MIPS is the only architecture modifying arch_kgdb_ops during init. This patch makes the init static, so that it can be changed to const in following patch, as recommended by checkpatch.pl Suggested-by: Paul Burton <paul.burton@mips.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> |
||
|
|
7faedcd4de |
kdb: use bool for binary state indicators
defcmd_in_progress is the state trace for command group processing - within a command group or not - usable is an indicator if a command set is valid (allocated/non-empty) - so use a bool for those binary indication here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> |
||
|
|
162bc7f5af |
kdb: Don't back trace on a cpu that didn't round up
If you have a CPU that fails to round up and then run 'btc' you'll end up crashing in kdb becaue we dereferenced NULL. Let's add a check. It's wise to also set the task to NULL when leaving the debugger so that if we fail to round up on a later entry into the debugger we won't backtrace a stale task. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> |
||
|
|
87b0959285 |
kgdb: Don't round up a CPU that failed rounding up before
If we're using the default implementation of kgdb_roundup_cpus() that uses smp_call_function_single_async() we can end up hanging kgdb_roundup_cpus() if we try to round up a CPU that failed to round up before. Specifically smp_call_function_single_async() will try to wait on the csd lock for the CPU that we're trying to round up. If the previous round up never finished then that lock could still be held and we'll just sit there hanging. There's not a lot of use trying to round up a CPU that failed to round up before. Let's keep a flag that indicates whether the CPU started but didn't finish to round up before. If we see that flag set then we'll skip the next round up. In general we have a few goals here: - We never want to end up calling smp_call_function_single_async() when the csd is still locked. This is accomplished because flush_smp_call_function_queue() unlocks the csd _before_ invoking the callback. That means that when kgdb_nmicallback() runs we know for sure the the csd is no longer locked. Thus when we set "rounding_up = false" we know for sure that the csd is unlocked. - If there are no timeouts rounding up we should never skip a round up. NOTE #1: In general trying to continue running after failing to round up CPUs doesn't appear to be supported in the debugger. When I simulate this I find that kdb reports "Catastrophic error detected" when I try to continue. I can overrule and continue anyway, but it should be noted that we may be entering the land of dragons here. Possibly the "Catastrophic error detected" was added _because_ of the future failure to round up, but even so this is an area of the code that hasn't been strongly tested. NOTE #2: I did a bit of testing before and after this change. I introduced a 10 second hang in the kernel while holding a spinlock that I could invoke on a certain CPU with 'taskset -c 3 cat /sys/...". Before this change if I did: - Invoke hang - Enter debugger - g (which warns about Catastrophic error, g again to go anyway) - g - Enter debugger ...I'd hang the rest of the 10 seconds without getting a debugger prompt. After this change I end up in the debugger the 2nd time after only 1 second with the standard warning about 'Timed out waiting for secondary CPUs.' I'll also note that once the CPU finished waiting I could actually debug it (aka "btc" worked) I won't promise that everything works perfectly if the errant CPU comes back at just the wrong time (like as we're entering or exiting the debugger) but it certainly seems like an improvement. NOTE #3: setting 'kgdb_info[cpu].rounding_up = false' is in kgdb_nmicallback() instead of kgdb_call_nmi_hook() because some implementations override kgdb_call_nmi_hook(). It shouldn't hurt to have it in kgdb_nmicallback() in any case. NOTE #4: this logic is really only needed because there is no API call like "smp_try_call_function_single_async()" or "smp_csd_is_locked()". If such an API existed then we'd use it instead, but it seemed a bit much to add an API like this just for kgdb. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> |
||
|
|
3cd99ac355 |
kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
When I had lockdep turned on and dropped into kgdb I got a nice splat on my system. Specifically it hit: DEBUG_LOCKS_WARN_ON(current->hardirq_context) Specifically it looked like this: sysrq: SysRq : DEBUG ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(current->hardirq_context) WARNING: CPU: 0 PID: 0 at .../kernel/locking/lockdep.c:2875 lockdep_hardirqs_on+0xf0/0x160 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0 #27 pstate: 604003c9 (nZCv DAIF +PAN -UAO) pc : lockdep_hardirqs_on+0xf0/0x160 ... Call trace: lockdep_hardirqs_on+0xf0/0x160 trace_hardirqs_on+0x188/0x1ac kgdb_roundup_cpus+0x14/0x3c kgdb_cpu_enter+0x53c/0x5cc kgdb_handle_exception+0x180/0x1d4 kgdb_compiled_brk_fn+0x30/0x3c brk_handler+0x134/0x178 do_debug_exception+0xfc/0x178 el1_dbg+0x18/0x78 kgdb_breakpoint+0x34/0x58 sysrq_handle_dbg+0x54/0x5c __handle_sysrq+0x114/0x21c handle_sysrq+0x30/0x3c qcom_geni_serial_isr+0x2dc/0x30c ... ... irq event stamp: ...45 hardirqs last enabled at (...44): [...] __do_softirq+0xd8/0x4e4 hardirqs last disabled at (...45): [...] el1_irq+0x74/0x130 softirqs last enabled at (...42): [...] _local_bh_enable+0x2c/0x34 softirqs last disabled at (...43): [...] irq_exit+0xa8/0x100 ---[ end trace adf21f830c46e638 ]--- Looking closely at it, it seems like a really bad idea to be calling local_irq_enable() in kgdb_roundup_cpus(). If nothing else that seems like it could violate spinlock semantics and cause a deadlock. Instead, let's use a private csd alongside smp_call_function_single_async() to round up the other CPUs. Using smp_call_function_single_async() doesn't require interrupts to be enabled so we can remove the offending bit of code. In order to avoid duplicating this across all the architectures that use the default kgdb_roundup_cpus(), we'll add a "weak" implementation to debug_core.c. Looking at all the people who previously had copies of this code, there were a few variants. I've attempted to keep the variants working like they used to. Specifically: * For arch/arc we passed NULL to kgdb_nmicallback() instead of get_irq_regs(). * For arch/mips there was a bit of extra code around kgdb_nmicallback() NOTE: In this patch we will still get into trouble if we try to round up a CPU that failed to round up before. We'll try to round it up again and potentially hang when we try to grab the csd lock. That's not new behavior but we'll still try to do better in a future patch. Suggested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> |
||
|
|
9ef7fa507d |
kgdb: Remove irq flags from roundup
The function kgdb_roundup_cpus() was passed a parameter that was documented as: > the flags that will be used when restoring the interrupts. There is > local_irq_save() call before kgdb_roundup_cpus(). Nobody used those flags. Anyone who wanted to temporarily turn on interrupts just did local_irq_enable() and local_irq_disable() without looking at them. So we can definitely remove the flags. Signed-off-by: Douglas Anderson <dianders@chromium.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> |
||
|
|
195303136f |
Kconfig file consolidation for v4.21
Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcJilwAAoJED2LAQed4NsGt1YP/RMTEUqbCSwS/CnTLrE+aVTC O2aWwB80ZlVwpeBbHLW5/M88OvOev0UaCr+gyzgpFRl5ITzS7Jevb8VbpGzblbH7 bFxIEyZFGQiy9oEWw3Lfu9JRSsLm3jNo7hkmdBSn2Rw3KkEd/YF7K3q9GuA7BpCS ZxAirebvEpr4KYEzkuc57NqCYx2Tc8G+JWr5D7pZCFaq9vxYt3TddGqw/c7iQVSQ 1Og1809IdhGyCSlA/ExfaqaBMaJHMRAOHX5GgkqZw1EbFcizUFhAAsKCrGL5nBtX NiWF9jhgHR1M+L69jfctOstrmGQD2KicNgWQf1aS5RQkPfjuqIKGT/i9g6J1pVyX TaW1J36Hcl8PpsKoPBnnrixd1T41O3/PuqtEJRm7LCBYOQiwS9sEmLO09RDRjER8 SPAAyvkhE8oq+0RHiTYN4tm8dyJc1djZ5wzgLnwFPAnU6SR+mbN02RzBMsYZXD+x RNbBSGBRJFQDBw6Rn+ktcIQvcKYmUqe1k1YNHMy6kG3QqvhBaDy+8PA/YjIKPQYQ B/NNUAMEJMys1OQrRL2UDXb2ysaCpzwMmlrBW2IwYsQrX5OwbPkNuQ5Mbe1Lr+mc 4NXR+HubvojsHaAby+OhFbrUX2Jcz3wqYj7aannb9sMRmw0VJXV5dPYUqje3ZhPS P2AovKT8O9nWsEttqER5 =WxId -----END PGP SIGNATURE----- Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option |
||
|
|
769e47094d |
Kconfig updates for v4.21
- support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcJieuAAoJED2LAQed4NsGHlIP/1s0fQ86XD9dIMyHzAO0gh2f 7rylfe2kEXJgIzJ0DyZdLu4iZtwbkEUqTQrRS1abriNGVemPkfBAnZdM5d92lOQX 3iREa700AJ2xo7V7gYZ6AbhZoG3p0S9U9Q2qE5S+tFTe8c2Gy4xtjnODF+Vel85r S0P8tF5sE1/d00lm+yfMI/CJVfDjyNaMm+aVEnL0kZTPiRkaktjWgo6Fc2p4z1L5 HFmMMP6/iaXmRZ+tHJGPQ2AT70GFVZw5ePxPcl50EotUP25KHbuUdzs8wDpYm3U/ rcESVsIFpgqHWmTsdBk6dZk0q8yFZNkMlkaP/aYukVZpUn/N6oAXgTFckYl8dmQL fQBkQi6DTfr9EBPVbj18BKm7xI3Y4DdQ2fzTfYkJ2XwNRGFA5r9N3sjd7ZTVGjxC aeeMHCwvGdSx1x8PeZAhZfsUHW8xVDMSQiT713+ljBY+6cwzA+2NF0kP7B6OAqwr ETFzd4Xu2/lZcL7gQRH8WU3L2S5iedmDG6RnZgJMXI0/9V4qAA+nlsWaCgnl1TgA mpxYlLUMrd6AUJevE34FlnyFdk8IMn9iKRFsvF0f3doO5C7QzTVGqFdJu5a0CuWO 4NBJvZjFT8/4amoWLfnDlfApWXzTfwLbKG+r6V2F30fLuXpYg5LxWhBoGRPYLZSq oi4xN1Mpx3TvXz6WcKVZ =r3Fl -----END PGP SIGNATURE----- Merge tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ... |
||
|
|
668c35f69c |
Kbuild updates for v4.21
Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcJiVeAAoJED2LAQed4NsGXEMP/1fdkBfZGxYlxp4w1tEBeRKZ GInxxMfHiHZlu7nFPQ3k1mncczZjeLbnKcLaybnPmqBSfQe1F7tN0ux1sHtWkVfI DvqoKaHObZ3lEMEVxCHXQ2bKrN/j9nB2xSxzr4dvc9DscW8dwKElZuKVE7nHKdhl z70xsalxHGEGY6hptJrucbv8KTBOSleZ8Gaat79sEDkDSLCTjxXB3WcVMWqDT0M/ IqN5QCwiPjZC3UCwuqq6+vnG1gyvDUORcbrVgHrBIKxLYAABYzugB5IlLpi8B31C ZUDmijSTandHd4SG5gw5uZoyYuK4YhZeI7g4yNyXSqnPurmcJxrGdpiuwRcE7xet 5yB2uaNbAFO6Fbz4gUdDEvryA9IZEPPn1Z0Btfpp7UOxiWEqE61oHReCNdkiad94 Oonl+ROZw5UOT3AZD3xCZTf9bTnQoCFccHTmnbaKqqSiDWxxLUXum7sNfnJ6GXEb fNQDuwuxtsPStaWoU93QNrGyl5e8jYTKFdphUCnZZ2/hE8ygoQ06PYmeBAk+UKfN UI2IqR8PHgmA97XJg+fHhbw6X4nQcPsg/usLqxGItAZNO2O4uXgaN24dOcHG74Bu 2Dk/gQQB2sVB/Dxfmlaxvvj98MVg7IMtpusAT2bQ7miiSS3EqPFT8KQMZYLICWuZ u7QQe20yCho3ZULmsRwH =0PCt -----END PGP SIGNATURE----- Merge tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files" * tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: remove unused cmd_gentimeconst kbuild: remove $(obj)/ prefixes in ./Kbuild treewide: add intermediate .s files to targets treewide: remove explicit rules for *offsets.s firmware: refactor firmware/Makefile firmware: remove unnecessary patterns from .gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore um: remove unused filechk_gen_header in Makefile scripts: add a tool to produce a compile_commands.json file kbuild: add -Werror=implicit-int flag unconditionally kbuild: add -Werror=strict-prototypes flag unconditionally kbuild: add -fno-PIE flag unconditionally scripts: coccinelle: Correct warning message scripts: coccinelle: only suggest true/false in files that already use them kbuild: handle part-of-module correctly for *.ll and *.symtypes kbuild: refactor part-of-module kbuild: refactor quiet_modtag kbuild: remove redundant quiet_modtag for $(obj-m) kbuild: refactor Makefile.asm-generic user/Makefile: Fix typo and capitalization in comment section ... |
||
|
|
d8372ba8ce |
lib: don't depend on linux headers being installed.
gen_crc64table requires linux include files to be installed in
/usr/include/linux. This is a new requrement so hosts that could
previously build the kernel, now cannot.
gen_crc64table makes this requirement by including <linux/swab.h>, but
nothing from that header is actaully used.
So remove the #include, so that the linux headers no longer need to be
installed.
Fixes:
|
||
|
|
3868772b99 |
A fairly normal cycle for documentation stuff. We have a new
document on perf security, more Italian translations, more
improvements to the memory-management docs, improvements to the
pathname lookup documentation, and the usual array of smaller
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAlwmSPkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y9ZoH/joPnMFykOxS0SmdfI7Z+F4EiJct/ZwF9bHx
T673T0RC30IgnUXGmBl5OtktfWqVh9aGqHOGwgh65ybp2QvzemdP0k6Lu6RtwNk9
6LfkpvuUb8FzaQmCHnSMzMSDmXtZUw3Z/mOjCBcQtfGAsUULNT08xl+Dr+gwWIWt
H+gPEEP+MCXTOQO1jm2dHOHW8NGm6XOijMTpOxp/pkoEY5tUxkVB1T//8EeX7LVh
c1QHzFrufE3bmmubCLtIuyVqZbm/V5l6rHREDQ46fnH/G9fM4gojzsrAL/Y2m4bt
E4y0XJHycjLMRDimAnYhbPm1ryTFAX1lNzHP3M/EF6Heqx8YHAk=
=vtwu
-----END PGP SIGNATURE-----
Merge tag 'docs-5.0' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"A fairly normal cycle for documentation stuff. We have a new document
on perf security, more Italian translations, more improvements to the
memory-management docs, improvements to the pathname lookup
documentation, and the usual array of smaller fixes.
As is often the case, there are a few reaches outside of
Documentation/ to adjust kerneldoc comments"
* tag 'docs-5.0' of git://git.lwn.net/linux: (38 commits)
docs: improve pathname-lookup document structure
configfs: fix wrong name of struct in documentation
docs/mm-api: link slab_common.c to "The Slab Cache" section
slab: make kmem_cache_create{_usercopy} description proper kernel-doc
doc:process: add links where missing
docs/core-api: make mm-api.rst more structured
x86, boot: documentation whitespace fixup
Documentation: devres: note checking needs when converting
doc🇮🇹 add some process/* translations
doc🇮🇹 fixes in process/1.Intro
Documentation: convert path-lookup from markdown to resturctured text
Documentation/admin-guide: update admin-guide index.rst
Documentation/admin-guide: introduce perf-security.rst file
scripts/kernel-doc: Fix struct and struct field attribute processing
Documentation: dev-tools: Fix typos in index.rst
Correct gen_init_cpio tool's documentation
Document /proc/pid PID reuse behavior
Documentation: update path-lookup.md for parallel lookups
Documentation: Use "while" instead of "whilst"
dmaengine: Add mailing list address to the documentation
...
|