Certain HP machines require the full 64 bits of _SUN as allowed
by the ACPI spec. Without this change, we get name collisions in
the lower 32 bits of the _SUN returned by firmware.
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Justin Chen <justin.chen@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch fixes the problem that causes an occupied slot to be turned
off even if it has a working device.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Fix printk format warning:
drivers/pci/hotplug/acpiphp_ibm.c:207: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'long long unsigned int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch refines messages in shpchp module. The main changes are as
follows:
- remove the trailing "."
- remove __func__ as much as possible
- capitalize the first letter of messages
- show PCI device address including its domain
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch refines messages in pciehp module. The main changes are as
follows:
- remove the trailing "."
- remove __func__ as much as possible
- capitalize the first letter of messages
- show PCI device address including its domain
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The following patch fixes the regression in 2.6.27 that causes kernel
NULL pointer dereference at cpqphp driver probe time. This patch should
be backported to the .27 stable series.
Seems to have been introduced by
f46753c5e3.
The root cause of this problem seems that cpqphp driver calls
pci_hp_register() wrongly. In current implementation, cpqphp driver
passes 'ctrl->pci_dev->subordinate' as a second parameter for
pci_hp_register(). But because hotplug slots and it's hotplug controller
(exists as a pci funcion) are on the same bus, it should be
'ctrl->pci_dev->bus' instead.
Cc: <stable@kernel.org>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits)
dock: make dock driver not a module
ACPI: fix ia64 build warning
ACPI: hack around sysfs warning with link order
ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n
intel_menlo: fix build warning
panasonic-laptop: fix build
ACPICA: Update version to 20080926
ACPICA: Add support for zero-length buffer-to-string conversions
ACPICA: New: Validation for predefined ACPI methods/objects
ACPICA: Fix for implicit return compatibility
ACPICA: Fixed a couple memory leaks associated with "implicit return"
ACPICA: Optimize buffer allocation procedure
ACPICA: Fix possible memory leak, error exit path
ACPICA: Fix fault after mem allocation failure in AML parser
ACPICA: Remove unused ACPI register bit definition
ACPICA: Update version to 20080829
ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname
ACPICA: Cleanup for internal Reference Object
ACPICA: Update comments - no functional changes
ACPICA: Update for Reference ACPI_OPERAND_OBJECT
...
The pattern !E && !E->fld is nonsensical. The patch below updates this
according to the assumption that && should be ||. But perhaps another
solution was intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@disable and_comm@
expression E;
identifier fld;
@@
- !E && !E->fld
+ !E || !E->fld
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch adds polling mechanism for Data Link Layer Link Active bit
after turning power on, instead of waiting for 1000 msec. This reduces
reduce the unnecessary long wait.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The PCI core now manages slot names on behalf of slot detection
and slot hotplug drivers, including the handling of duplicate
slot names.
We can use the fakephp driver to help test the new functionality.
Add a 'dup_slots' module param to force fakephp to create multiple
slots with the same name. We can then verify that the PCI core
correctly renamed the slots.
sapphire:/sys/bus/pci/slots # modprobe fakephp dup_slots
sapphire:/sys/bus/pci/slots # ls
fake fake-10 fake-3 fake-5 fake-7 fake-9
fake-1 fake-2 fake-4 fake-6 fake-8
Cc: kristen.c.accardi@intel.com
Cc: matthew@wil.cx
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Now that the PCI core manages the 'name' for each individual
hotplug driver, and all drivers (except rpaphp) have been converted
to use hotplug_slot_name(), there is no need for the PCI hotplug
core to drag around its own copy of name either.
Cc: kristen.c.accardi@intel.com
Cc: matthew@wil.cx
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We do not need to manage our own name parameter, especially since
the PCI core can change it on our behalf, in the case of duplicate
slot names.
Remove 'name' from shpchp's version of struct slot.
This change also removes the unused struct task_event from the
slot structure.
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We no longer need to manage our version of hotplug_slot->name
since the PCI and hotplug core manage it on our behalf.
Update the sn_hp_slot_private_alloc() interface to fill in
the correct name for us, as that function already has all
the parameters needed to determine the name.
Cc: kristen.c.accardi@intel.com
Cc: jpk@sgi.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
rpaphp tends to use slot->name directly everywhere, and doesn't
ever need slot->hotplug_slot->name.
struct hotplug_slot->name is going away, so convert rpaphp directly
manipulate its own slot->name everywhere, and don't bother touching
slot->hotplug_slot->name.
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We do not need to manage our own name parameter, especially since
the PCI core can change it on our behalf, in the case of duplicate
slot names.
Remove 'name' from pciehp's version of struct slot, and remove
unused 'task_list' as well.
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We no longer need to manage our version of hotplug_slot->name
since the PCI and hotplug core manage it on our behalf.
Now, we simply advise the PCI core of the name that we would
like, and let the core take care of the rest.
Additionally, slightly rearrange the members of struct slot
so they are naturally aligned to eliminate holes.
Cc: jbarnes@virtuousgeek.org
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Remove 'name' from fakephp's struct dummy_slot, as the PCI core
will now manage our slot name for us.
Cc: jbarnes@virtuousgeek.org
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We no longer need to manage our version of hotplug_slot->name
since the PCI and hotplug core manage it on our behalf.
Now, we simply advise the PCI core of the name that we would
like, and let the core take care of the rest.
Cc: jbarnes@virtuousgeek.org
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We no longer need to manage our version of hotplug_slot->name
since the PCI and hotplug core manage it on our behalf.
Now, we simply advise the PCI core of the name that we would
like, and let the core take care of the rest.
Cc: kristen.c.accardi@intel.com
Cc: scottm@somanetworks.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We do not need to manage our own name parameter, especially since
the PCI core can change it on our behalf, in the case of duplicate
slot names.
Remove 'name' from acpiphp's version of struct slot.
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Prevent callers of pci_create_slot() from registering slots with
duplicate names. This condition occurs most often when PCI hotplug
drivers are loaded on platforms with broken firmware that assigns
identical names to multiple slots.
We now rename these duplicate slots on behalf of the user.
If firmware assigns the name N to multiple slots, then:
The first registered slot is assigned N
The second registered slot is assigned N-1
The third registered slot is assigned N-2
etc.
This is the permanent fix mentioned in earlier commits d6a9e9b4 and
167e782e (shpchp/pciehp: Rename duplicate slot name...).
We take advantage of the new 'hotplug' parameter in pci_create_slot()
to prevent a slot create/rename race between hotplug drivers and
detection drivers.
Scenario A:
hotplug driver detection driver
-------------- ----------------
pci_create_slot(hotplug=set)
pci_create_slot(hotplug=NULL)
The hotplug driver creates the slot with its desired name, and then
releases the semaphore. Now, the detection driver tries to create
the same slot, but it already exists. We don't care about renaming,
so return the existing slot.
Scenario B:
hotplug driver detection driver
-------------- ----------------
pci_create_slot(hotplug=NULL)
pci_create_slot(hotplug=set)
The detection driver creates the slot with name "X". Then the hotplug
driver tries to create the same slot, but wants the name "Y" instead.
We detect that we're trying to create the same slot and that we also
want a rename, so rename the slot to "Y" and return.
Scenario C:
hotplug driver hotplug driver
-------------- ----------------
pci_create_slot(hotplug=set)
pci_create_slot(hotplug=set)
Two separate hotplug drivers are attempting to claim the slot and
are passing valid hotplug_slot args to pci_create_slot(). We detect
that the slot already has a ->hotplug callback, prevent a rename,
and return -EBUSY.
Cc: kristen.c.accardi@intel.com
Cc: matthew@wil.cx
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Convert the pci_hotplug_slot_list_lock, which only protected the
list of hotplug slots, to a pci_hp_mutex which now protects both
interfaces.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Slot detection drivers can co-exist with hotplug drivers. The names
of the detected/claimed slots may be different depending on module
load order.
For legacy reasons, we need to allow hotplug drivers to override
the slot name if a detection driver is loaded first (and they find
the same slots).
Creating and overriding slot names should be an atomic operation,
otherwise you get a locking nightmare as various drivers race to
call pci_create_slot().
pci_create_slot() is already serialized by grabbing the pci_bus_sem.
We update the API and add a 'hotplug' param, which is:
set if the caller is a hotplug driver
NULL if the caller is a detection driver
pci_create_slot() does not actually use the 'hotplug' parameter in this
patch. A later patch will add the logic that uses it.
Cc: kristen.c.accardi@intel.com
Cc: matthew@wil.cx
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Update pci_hp_register() to take a const char *name parameter.
The motivation for this is to clean up the individual hotplug
drivers so that each one does not have to manage its own name.
The PCI core should be the place where we manage the name.
We update the interface and all callsites first, in a
"no functional change" manner, and clean up the drivers later.
Cc: kristen.c.accardi@intel.com
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The commit 356a9d6f3dd283f83861adf1ac909879f0e66411 (PCI: fix hotplug
get_##name return value problem) doesn't seem to be merged properly.
Because of this, PCI hotplug no longer works (Read/Write PCI hotplug
files always returns -ENODEV).
This patch fixes wrong check of try_module_get() return value check in
get_##name().
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Change debug variable name to one more unique to this driver.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Currently, get_##name in pci_hotplug_core.c will return 0 if module
unload wins the race between unload & reading the hotplug file. Fix
that case to return -ENODEV like it should.
Reviewed-by: Alex Chiang <achiang@hp.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
I think an appropriate name tag of "hpdriver_portdrv" variable
is "pciehp" rather than "hpdriver".
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Current pciehp driver gets irq number from pci_dev->irq. But because
pciehp driver is a pci express port service driver, it should get irq
number from pcie_device->irq.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Please run checkpatch prior to sending patches, this one fixes several style
issues with the list_for_each conversion patch.
Cc: Cordelia Sam <cordesam@gmail.com>
Cc: Cordelia Sam <cordsam@linux.vnet.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Make code more readable with list_for_each_entry().
Signed-off-by: Cordelia Sam <cordesam@gmail.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
As of version 2.0, ACPI can return 64-bit integers. The current
acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms.
Change the argument to take a pointer to an acpi_integer so we support
64-bit integers on all platforms.
lenb: replaced use of "acpi_integer" with "unsigned long long"
lenb: fixed bug in acpi_thermal_trips_update()
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
IO resource and ioremap debugging uncovered this ioremap() done
by drivers/pci/hotplug/ibmphp_ebda.c:
initcall pci_hotplug_init+0x0/0x41 returned 0 after 3 msecs
calling ibmphp_init+0x0/0x360 @ 1
ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
resource map sanity check conflict: 0x9f800 0xaf5e7 0x9f800 0x9ffff reserved
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:175 __ioremap_caller+0x5c/0x226()
Pid: 1, comm: swapper Not tainted 2.6.27-rc7-tip-00914-g347b10f-dirty #36038
[<c013a72d>] warn_on_slowpath+0x41/0x68
[<c0156f00>] ? __lock_acquire+0x9ba/0xa7f
[<c012158c>] ? do_flush_tlb_all+0x0/0x59
[<c015ac31>] ? smp_call_function_mask+0x74/0x17d
[<c012158c>] ? do_flush_tlb_all+0x0/0x59
[<c013b228>] ? printk+0x1a/0x1c
[<c013f302>] ? iomem_map_sanity_check+0x82/0x8c
[<c0a773e8>] ? _read_unlock+0x22/0x25
[<c013f302>] ? iomem_map_sanity_check+0x82/0x8c
[<c0154e17>] ? trace_hardirqs_off+0xb/0xd
[<c0127731>] __ioremap_caller+0x5c/0x226
[<c0156158>] ? trace_hardirqs_on+0xb/0xd
[<c012767d>] ? iounmap+0x9d/0xa5
[<c01279dd>] ioremap_nocache+0x15/0x17
[<c0403c42>] ? ioremap+0xd/0xf
[<c0403c42>] ioremap+0xd/0xf
[<c0f1928f>] ibmphp_access_ebda+0x60/0xa0e
[<c0f17f64>] ibmphp_init+0xb5/0x360
[<c0101057>] do_one_initcall+0x57/0x138
[<c0f17eaf>] ? ibmphp_init+0x0/0x360
[<c0156158>] ? trace_hardirqs_on+0xb/0xd
[<c0148d75>] ? __queue_work+0x2b/0x30
[<c0f17eaf>] ? ibmphp_init+0x0/0x360
[<c0f015a0>] kernel_init+0x17b/0x1e2
[<c0f01425>] ? kernel_init+0x0/0x1e2
[<c01178b3>] kernel_thread_helper+0x7/0x10
=======================
---[ end trace a7919e7f17c0a725 ]---
initcall ibmphp_init+0x0/0x360 returned -19 after 144 msecs
calling zt5550_init+0x0/0x6a @ 1
the problem is this code:
io_mem = ioremap (ebda_seg<<4, 65000);
it assumes that the EBDA is 65000 bytes. But BIOS EBDA pointers are
at most 1K large.
_if_ the Rio code truly extends upon the customary EBDA size it needs
to iounmap() this memory and ioremap() it larger, once it knows it from
the generic descriptors that a Rio system is around.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
dock's uevent reported itself, not ata. It might be difficult to find an
ata device just according to a dock. This patch introduces docking ops
for each device in a dock. when docking, dock driver can send device
specific uevent. This should help dock station too (not just bay)
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch fixes an obvious bug (loop was never entered) caused by
commit 820943b6fc
(pciehp: cleanup pcie_poll_cmd).
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Commit fe99740cac (construct one
fakephp slot per PCI slot) introduced a regression, causing a
deadlock when removing a PCI device.
We also never actually removed the device from the PCI core.
So we:
- remove the device from the PCI core
- do not directly call remove_slot() to prevent deadlock
Yu Zhao reported and diagnosed this defect.
Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Yu Zhao <yu.zhao@intel.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Commit ef0ff95f13 (shpchp: fix slot name)
introduces the shpchp_slot_with_bus module parameter, which was intended
to help work around broken firmware that assigns the same name to multiple
slots.
Commit b3bd307c62 (shpchp: add message about
shpchp_slot_with_bus option) tells the user to use the above parameter
in the event of a name collision.
This approach is sub-optimal because it requires too much work from
the user.
Instead, let's rename the slot on behalf of the user. If firmware
assigns the name N to multiple slots, then:
The first registered slot is assigned N
The second registered slot is assigned N-1
The third registered slot is assigned N-2
The Mth registered slot becomes N-M
In the event we overflow the slot->name parameter, we report an
error to the user.
This is a temporary fix until the entire PCI core can be reworked
such that individual drivers no longer have to manage their own
slot names.
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Commit 3800345f72 (pciehp: fix slot name)
introduces the pciehp_slot_with_bus module parameter, which was intended
to help work around broken firmware that assigns the same name to multiple
slots.
Commit 9e4f2e8d4d (pciehp: add message about
pciehp_slot_with_bus option) tells the user to use the above parameter
in the event of a name collision.
This approach is sub-optimal because it requires too much work from
the user.
Instead, let's rename the slot on behalf of the user. If firmware
assigns the name N to multiple slots, then:
The first registered slot is assigned N
The second registered slot is assigned N-1
The third registered slot is assigned N-2
The Mth registered slot becomes N-M
In the event we overflow the slot->name parameter, we report an
error to the user.
This is a temporary fix until the entire PCI core can be reworked
such that individual drivers no longer have to manage their own
slot names.
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Commit f46753c5e3 ("PCI: introduce pci_slot") removed the need for this error path. Eliminate this warning:
drivers/pci/hotplug/rpaphp_slot.c: In function 'rpaphp_register_slot':
drivers/pci/hotplug/rpaphp_slot.c:151: warning: label 'sysfs_fail' defined but not used
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Consolidate finding of a root bridge and getting its handle to the one
inline function. It's cut & pasted on multiple places. Use this new
inline in those.
Cc: kristen.c.accardi@intel.com
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
_OSC should be ran on a root bridge instead of the device itself. Do
this before touching OSHP since PCI fw specs states that _OSC should be
preferred over OSHP (however if the device has OSHP but not _OSC -- not
a root bridge -- it's not).
Cc: kristen.c.accardi@intel.com
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
