Many controller implementations will return errors to commands that will
not succeed, but without the DNR bit set. The driver previously retried
these commands an unlimited number of times until the command timeout
has exceeded, which takes an unnecessarilly long period of time.
This patch limits the number of retries a command can have, defaulting
to 5, but is user tunable at load or runtime.
The struct request's 'retries' field is used to track the number of
retries attempted. This is in contrast with scsi's use of this field,
which indicates how many retries are allowed.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
When disabling the controller, the specification says the register
NVME_REG_CC should be written and then driver needs to wait the
adapter to be ready, which is checked by reading another register
bit (NVME_CSTS_RDY). There's a timeout validation in this checking,
so in case this timeout is reached the driver gives up and removes
the adapter from the system.
After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003)
(HGST adapter) end up being removed if we issue a reset_controller,
because driver keeps verifying the NVME_REG_CSTS until the timeout is
reached. This patch adds a necessary quirk for this adapter, by
introducing a delay before nvme_wait_ready(), so the reset procedure
is able to be completed. This quirk is needed because just increasing
the timeout is not enough in case of this adapter - the driver must
wait before start reading NVME_REG_CSTS register on this specific
device.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvme fabric (RDMA, FC, etc...) can introduce port, link or node
failures that may require a reconnect to re-establish the connection.
Add a new reconnecting state that will initially be used by the RDMA
driver.
Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Periodic keep-alive is a mandatory feature in NVMe over Fabrics, and
optional in NVMe 1.2.1 for PCIe. This patch adds periodic keep-alive
sent from the host to verify that the controller is still responsive
and vice-versa. The keep-alive timeout is user-defined (with
keep_alive_tmo connection parameter) and defaults to 5 seconds.
In order to avoid a race condition where the host sends a keep-alive
competing with the target side keep-alive timeout expiration, the host
adds a grace period of 10 seconds when publishing the keep-alive timeout
to the target.
In case a keep-alive failed (or timed out), a transport specific error
recovery kicks in.
For now only NVMe over Fabrics is wired up to support keep alive, but
we can add PCIe support easily once controllers actually supporting it
become available.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The NVMe over Fabrics library provides an interface for both transports
and the nvme core to handle fabrics specific commands and attributes
independent of the underlying transport.
In addition, the fabrics library adds a misc device interface that allow
actually creating a fabrics controller, as we can't just autodiscover
it like in the PCI case. The nvme-cli utility has been enhanced to use
this interface to support fabric connect and discovery.
Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>,
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>,
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
- delete_controller: This attribute allows to delete a controller.
A driver is not obligated to support it (pci doesn't) so it is
created only if the driver supports it. The new fabrics drivers
will support it (essentialy a disconnect operation).
Usage:
echo > /sys/class/nvme/nvme0/delete_controller
- subsysnqn: This attribute shows the subsystem nqn of the configured
device. If a driver does not implement the get_subsysnqn method, the
file will not appear in sysfs.
- transport: This attribute shows the transport name. Added a "name"
field to struct nvme_ctrl_ops.
For loop,
cat /sys/class/nvme/nvme0/transport
loop
For RDMA,
cat /sys/class/nvme/nvme0/transport
rdma
For PCIe,
cat /sys/class/nvme/nvme0/transport
pcie
- address: This attributes shows the controller address. The fabrics
drivers that will implement get_address can show the address of the
connected controller.
example:
cat /sys/class/nvme/nvme0/address
traddr=192.168.2.2,trsvcid=1023
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
NVMe over fabrics will use __nvme_submit_sync_cmd in the the
transport and require a few tweaks to it. For that we export it
and add a few more paramters:
1. allow passing a queue ID to the block layer
For the NVMe over Fabrics connect command we need to able to specify a
queue ID that we want to send the command on. Add a qid parameter to
the relevant functions to enable this behavior.
2. allow submitting at_head commands
In cases where we want to (re)connect to a controller
where we have inflight queued commands we want to first
connect and only then allow the other queued commands to
be kicked. This will prevents failures in controller resets
and reconnects.
3. allow passing flags to blk_mq_allocate_request
Both for Fabrics connect the the keep-alive feature in NVMe 1.2.1 we
want to be able to use reserved requests.
Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
So it can be used by fabrics driver also.
Signed-off-by: Ming Lin <ming.l@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Keith Busch <keith.bsuch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The req operation REQ_OP is separated from the rq_flag_bits
definition. This converts the block layer drivers to
use req_op to get the op from the request struct.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch adds a new state that when set has the core automatically
kill request queues prior to removing namespaces.
If PCI device is not present at the time the nvme driver's remove is
called, we can kill all IO queues immediately instead of waiting for
the watchdog thread to do that at its polling interval. This improves
scenarios where multiple hot plug events occur at the same time since
it doesn't block the pci enumeration for as long.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This hides command cleanup into nvme.h and fabrics drivers will
also use it.
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The transport driver still needs to do the actual submission, but all the
higher level code can be shared.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Move the scan work item and surrounding code to the common code. For now
we need a new finish_scan method to allow the PCI driver to set the
irq affinity hints, but I have plans in the works to obsolete this as well.
Note that this moves the namespace scanning from nvme_wq to the system
workqueue, but as we don't rely on namespace scanning to finish from reset
or I/O this should be fine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Replace the adhoc flags in the PCI driver with a state machine in the
core code. Based on code from Sagi Grimberg for the Fabrics driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Controller IDs in NVMe are unsigned 16-bit types. In the Fabrics driver we
actually pass ctrl->id by reference, so we need it to have the correct type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This moves nvme_setup_{flush,discard,rw} calls into a common
nvme_setup_cmd() helper. So we can eventually hide all the command
setup in the core module and don't even need to update the fabrics
drivers for any specific command type.
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The helper returns the number of bytes that need to be mapped
using PRPs/SGL entries.
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block driver updates from Jens Axboe:
"This is the block driver pull request for this merge window. It sits
on top of for-4.6/core, that was just sent out.
This contains:
- A set of fixes for lightnvm. One from Alan, fixing an overflow,
and the rest from the usual suspects, Javier and Matias.
- A set of fixes for nbd from Markus and Dan, and a fixup from Arnd
for correct usage of the signed 64-bit divider.
- A set of bug fixes for the Micron mtip32xx, from Asai.
- A fix for the brd discard handling from Bart.
- Update the maintainers entry for cciss, since that hardware has
transferred ownership.
- Three bug fixes for bcache from Eric Wheeler.
- Set of fixes for xen-blk{back,front} from Jan and Konrad.
- Removal of the cpqarray driver. It has been disabled in Kconfig
since 2013, and we were initially scheduled to remove it in 3.15.
- Various updates and fixes for NVMe, with the most important being:
- Removal of the per-device NVMe thread, replacing that with a
watchdog timer instead. From Christoph.
- Exposing the namespace WWID through sysfs, from Keith.
- Set of cleanups from Ming Lin.
- Logging the controller device name instead of the underlying
PCI device name, from Sagi.
- And a bunch of fixes and optimizations from the usual suspects
in this area"
* 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits)
NVMe: Expose ns wwid through single sysfs entry
drivers:block: cpqarray clean up
brd: Fix discard request processing
cpqarray: remove it from the kernel
cciss: update MAINTAINERS
NVMe: Remove unused sq_head read in completion path
bcache: fix cache_set_flush() NULL pointer dereference on OOM
bcache: cleaned up error handling around register_cache()
bcache: fix race of writeback thread starting before complete initialization
NVMe: Create discard zero quirk white list
nbd: use correct div_s64 helper
mtip32xx: remove unneeded variable in mtip_cmd_timeout()
lightnvm: generalize rrpc ppa calculations
lightnvm: remove struct nvm_dev->total_blocks
lightnvm: rename ->nr_pages to ->nr_sects
lightnvm: update closed list outside of intr context
xen/blback: Fit the important information of the thread in 17 characters
lightnvm: fold get bb tbl when using dual/quad plane mode
lightnvm: fix up nonsensical configure overrun checking
xen-blkback: advertise indirect segment support earlier
...
The method to uniquely identify a namespace depends on the controller's
specification revision level and implemented capabilities. This patch
has the driver figure this out and exports the unique string through a
single 'wwid' attribute so the user doesn't have this burden.
The longest namespace unique identifier is used if available. If not
available, the driver will concat the controller's vendor, serial,
and model with the namespace ID. The specification provides this as a
unique indentifier.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The NVMe specification does not require discarded blocks return zeroes on
read, but provides that behavior as a possibility. Some applications more
efficiently use an SSD if reads on discarded blocks were deterministically
zero, based on the "discard_zeroes_data" queue attribute.
There is no specification defined way to determine device behavior on
discarded blocks, so the driver always left the queue setting disabled. We
can only know behavior based on individual device models, so this patch
adds a flag to the NVMe "quirk" list that vendors may set if they know
their controller works that way. The patch also sets the new flag for one
such known device.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Suggested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This moves failed queue handling out of the namespace removal path and
into the reset failure path, fixing a hanging condition if the controller
fails or link down during del_gendisk. Previously the driver had to see
the controller as degraded prior to calling del_gendisk to setup the
queues to fail. But, if the controller happened to fail after this,
there was no task to end outstanding requests.
On failure, all namespace states are set to dead. This has capacity
revalidate to 0, and ends all new requests with error status.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch makes nvme namespace removal lockless. It is up to the caller
to ensure no active namespace scanning is occuring. To ensure no scan
work occurs, the nvme pci driver adds a removing state to the controller
device to avoid queueing scan work during removal. The work is flushed
after setting the state, so no new scan work can be queued.
The lockless removal allows the driver to cleanup a namespace
request_queue if the controller fails during removal. Previously this
could deadlock trying to acquire the namespace mutex in order to handle
such events.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
A namespace may be detached from a controller, but a user may be holding
a reference to it. Attaching a new namespace with the same NSID will create
duplicate names when using the NSID to name the disk.
This patch uses an IDA that is released only when the last reference is
released instead of using the namespace ID.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
For NVMe over Fabrics, the cntlid will be used by systemd/udev to
create link to the device, for example,
/dev/disk/by-path/<fabrics-info>-<cntlid>-<namespace> -> /dev/nvme0n1
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Both LighNVM and NVMe over Fabrics need to look at more than just the
status and result field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matias Bj?rling <m@bjorling.me>
Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The function returns true when the controller can't handle IO.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Split dev_list_lock into one in the core and one in the PCI driver.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We don't want to be able to unload the fabric driver when we have
openened referenced to our namespaces. Thus, for each nvme_open we
take a reference on the fabric driver and put it in nvme_release.
This behavior is consistent with the scsi model.
This resolves the panic when unloading a fabric module with
mpath holders.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ian Bakshan <ianb@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull NVMe updates from Jens Axboe:
"Last branch for this series is the nvme changes. It's in a separate
branch to avoid splitting too much between core and NVMe changes,
since NVMe is still helping drive some blk-mq changes. That said, not
a huge amount of core changes in here. The grunt of the work is the
continued split of the code"
* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
uapi: update install list after nvme.h rename
NVMe: Export NVMe attributes to sysfs group
NVMe: Shutdown controller only for power-off
NVMe: IO queue deletion re-write
NVMe: Remove queue freezing on resets
NVMe: Use a retryable error code on reset
NVMe: Fix admin queue ring wrap
nvme: make SG_IO support optional
nvme: fixes for NVME_IOCTL_IO_CMD on the char device
nvme: synchronize access to ctrl->namespaces
nvme: Move nvme_freeze/unfreeze_queues to nvme core
PCI/AER: include header file
NVMe: Export namespace attributes to sysfs
NVMe: Add pci error handlers
block: remove REQ_NO_TIMEOUT flag
nvme: merge iod and cmd_info
nvme: meta_sg doesn't have to be an array
nvme: properly free resources for cancelled command
nvme: simplify completion handling
nvme: special case AEN requests
...
NVMe submits all commands through the block layer now. This means we
can let requests queue at the blk-mq hardware context since there is no
path that bypasses this anymore so we don't need to freeze the queues
anymore. The driver can simply stop the h/w queues from running during
a reset instead.
This also fixes a WARN in percpu_ref_reinit when the queue was unfrozen
with requeued requests.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently traversal and modification of ctrl->namespaces happens completely
unsynchronized, which can be fixed by the addition of a simple mutex.
Note: nvme_dev_ioctl will be handled in the next patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Nothing pci specific about them and We'll need them exported
in other transports too.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Exposes the NGUID, EUI-64, and NSID to sysfs entries under the disk's
kobject.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We'll need them in other places later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We don't want to allow new references to open on a device that is
removed. This ties the lifetime of these handles to the physical device's
presence rather than to the open reference count.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The NVMe 1.1 specification provides an identify mode to return a
list of active namespaces. This is more efficient to discover which
namespace identifiers are active on a controller, providing potentially
significant improvement in scan time for controllers with sparesly
populated namespaces.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: add quirk for the broken Qemu Identify implementation. To be relaxed
later]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
There is no lock to sychronize access to the abort_limit field of
struct nvme_ctrl, so switch it to an atomic_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
To properly document how we are using a negative Linux error value to
communicate request cancellations inside the driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Split out a helper that just issues the Set Features and interprets the
result which can go to common code, and document why we are ignoring
non-timeout error returns in the PCIe driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
For this we need to add a proper controller init routine and a list of
all controllers that is in addition to the list of PCIe controllers,
which stays in pci.c. Note that we remove the sysfs device when the
last reference to a controller is dropped now - the old code would have
kept it around longer, which doesn't make much sense.
This requires a new ->reset_ctrl operation to implement controleller
resets, and a new ->write_reg32 operation that is required to implement
subsystem resets. We also now store caches copied of the NVMe compliance
version and the flag if a controller is attached to a subsystem or not in
the generic controller structure now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Fixes for pr merge]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The namespace scanning code has been mostly generic already, we just
need to store a pointer to the tagset in the nvme_ctrl structure, and
add a method to check if a controller is I/O incapable. The latter
will hopefully be replaced by a proper controller state machine soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Fixed pr conflicts]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
And add the 64-bit register read operation for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add an enum for all workarounds not in the spec and identify the affected
controllers at probe time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This moves the block_device_operations over to common code mostly
as-is. The only change is that the ns and ctrl refcounting got some
small refcounting to have wrappers around the kref_put operations.
A new free_ctrl operation is added to allow the PCI driver to free
it's ressources on the final drop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Moved the integrity and pr changes due to merge conflict]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use the integrity API to pass through metadata from userspace. For PI
enabled devices this means that we now validate the reftag, which seems
like an unintentional ommission in the old code.
Thanks to Keith Busch for testing and fixes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Skip metadata setup on admin commands]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a separate nvme_submit_user_cmd for commands that directly DMA
to or from userspace. We'll add metadata support to that soon and
the common version would become too messy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
And mark them inline so that we don't slow down the I/O submission path by
having to turn it into a forced out of line call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
And mark it inline so that we don't slow down the completion path by
having to turn it into a forced out of line call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
