At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN provides a hook to check if we can have a new pipe allocation based
on some DC constraints. If the current configuration supports the new
pipe request, DC updates its context; otherwise, it will keep the same
configuration. This behavior is similar across multiple ASICs, and for
this reason, we reused DCN20 on DCN321. However, this DCN32x has some
peculiarities which require its function to avoid weird pipe split
issues. This commit update this issue by using
dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of
dcn20_acquire_idle_pipe_for_layer.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under DCN32/321 we identified some code paths that DC never executes.
This commit removes those unused codes to avoid distractions when
debugging issues.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
when dynamic odm was turned on, there is also logic to halve the pixelclk
this still turned on when we avoided odm in the case of odd h_total timings
how:
block the pixel clk mechanism also in the case of odd h_total timings
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.
[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.
[HOW?]
Increase compbuf size prior to updating clocks.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For SubVP pipe split case we need to use a minimial transition
when opening MPO video since we are transitioning from 4 pipes
to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
there was a shallow copy of the dc->current_state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Analyzer shows incorrect V freq in MSA for some large timing.
[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.
[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why?]
Currently SubVP programming is only done in commit_planes_for_stream, as
it was expected only this call would add/remove planes from a
display.
[How?]
Add SubVP programming to dc_commit_state_no_check.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_bo_kmap() returns error when fails to map buffer object. Add the
error check and propagate the error.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now,
change it to static.
Fixes: c55bf690fe ("drm/amd/display: Add explicit FIFO disable for DP blank")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.1:
Core Changes:
- Add dma_resv_assert_held to vmap/vunmap calls.
- Add kunit tests for some format conversion calls.
- Don't rewrite link config when setting phy test pattern in
DP link training.
Driver Changes:
- Assorted small fixes in bridge/lt8192b, qxl, virtio-gpu, ast.
- Fix corrupted image output in lt8912b.
- Fix driver unbind in meson.
- Add INX, BOE, AUO, Multi-Inno Technology panels to panel-edp.
- Synchronize access to GEM bo's in simpledrm, ssd130x.
- Use dev_err_probe in panel-edp and panel-simple.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/afbd505a-3799-c73b-8008-ef6e156ad7e1@linux.intel.com
This was fixed in initialize_cpsch before, but not in initialize_nocpsch.
Factor sdma bitmap initialization into a helper function to apply the
correct implementation in both cases without duplicating it.
v2: Added a range check
Reported-by: Ellis Michael <ellis@ellismichael.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unified memory usage with xnack off is tracked to avoid oversubscribe
system memory, with xnack on, we don't track unified memory usage to
allow memory oversubscribe. When switching xnack mode from off to on,
subsequent free ranges allocated with xnack off will not unreserve
memory. When switching xnack mode from on to off, subsequent free ranges
allocated with xnack on will unreserve memory. Both cases cause memory
accounting unbalanced.
When switching xnack mode from on to off, need reserve already allocated
svm range memory. When switching xnack mode from off to on, need
unreserve already allocated svm range memory.
v6: Take prange lock to access range child list
v5: Handle prange child ranges
v4: Handle reservation memory failure
v3: Handle switching xnack mode race with svm_range_deferred_list_work
v2: Handle both switching xnack from on to off and from off to on cases
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For xgmi sriov, the reset is handled by host driver and hive->reset_domain
is not initialized so need to check if it exists before doing a put.
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify the logic in amdgpu_gmc_noretry_set by getting rid of the
switch. Also set noretry=1 as default for GFX 10.3.0 and greater since
retry faults are not supported.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On ChromeOS clang build, the following warning is seen:
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:6: error: variable 'mc_umc_status' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (mca_addr == UMC_INVALID_ADDR) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:485:21: note: uninitialized use occurs here
if ((REG_GET_FIELD(mc_umc_status, MCA_UMC_UMC0_MCUMC_STATUST0, Val) == 1 &&
^~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:1208:5: note: expanded from macro 'REG_GET_FIELD'
(((value) & REG_FIELD_MASK(reg, field)) >> REG_FIELD_SHIFT(reg, field))
^~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:2: note: remove the 'if' if its condition is always true
if (mca_addr == UMC_INVALID_ADDR) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:460:24: note: initialize the variable 'mc_umc_status' to silence this warning
uint64_t mc_umc_status, mc_umc_addrt0;
^
= 0
1 error generated.
make[5]: *** [/mnt/host/source/src/third_party/kernel/v5.15/scripts/Makefile.build:289: drivers/gpu/drm/amd/amdgpu/umc_v6_7.o] Error 1
Fix by initializing mc_umc_status = 0.
Fixes: 1014bd1cb3 ("drm/amdgpu: support to convert dedicated umc mca address")
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enabling Z10 optimizations allows DMUB to disable the OTG during PSR
link-off. This theoretically saves power by putting more of the display
hardware to sleep. However, we observe that with PSR SU, it causes
visual artifacts, higher power usage, and potential system hang.
This is partly due to an odd behavior with the VStartup interrupt used
to signal DRM vblank events. If the OTG is toggled on/off during a PSR
link on/off cycle, the vstartup interrupt fires twice in quick
succession. This generates incorrectly timed vblank events.
Additionally, it can cause cursor updates to generate visual artifacts.
Note that this is not observed with PSR1 since PSR is fully disabled
when there are vblank event requestors. Cursor updates are also
artifact-free, likely because there are no selectively-updated (SU)
frames that can generate artifacts.
[How]
A potential solution is to disable z10 idle optimizations only when fast
updates (flips & cursor updates) are committed. A mechanism to do so
would require some thoughtful design. Let's just disable idle
optimizations for PSR2 for now.
Fixes: 7cc191ee76 ("drm/amd/display: Implement MPO PSR SU")
Reported-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/
Tested-by: August Wikerfors <git@augustwikerfors.se>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update umc error address query interface, the mca address can be read
from register or input from parameter.
TODO: define a common address conversion function to simplify the code.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it global so we can convert specific mca address.
v2: rename query_error_address_per_channel to
convert_ras_error_address
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix init SDMA microcode error for sdma v4, which caused by mistake when
rearch sdma init microcode function (coding 4.2.2 to 4.2.0).
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Address the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds]
527 | stream->writeback_info[j] = stream->writeback_info[i];
| ~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29,
from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27:
./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’
241 | struct dc_writeback_info writeback_info[MAX_DWB_PIPES];
|
Currently, we aren't checking to see if j remains within
writeback_info[]'s bounds. So, add a check to make sure that we aren't
overflowing the buffer.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
