The DT based MSM platforms can join the multi-platform builds, so
introduce a DT based ARCH_MSM option. This option allows DT based
MSM platforms to be built into the multi-platform kernel. Also
introduce a hidden ARCH_MSM config that both the DT and non-DT
platform support code select to avoid churn in places that depend
on CONFIG_ARCH_MSM.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The MSM timer is only used on MSM devices that don't have the
architected timers. Introduce a hidden Kconfig option for this
driver so that we don't build it on the platforms that don't need
it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The functionality provided by clock.c in mach-msm is only needed
on proc_comm based platforms. Only build the file if proc_comm is
enabled. This prevents compile failures for platforms that are
part of the multi-platform kernel.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
* qcom/drivers:
tty: serial: Limit msm_serial_hs driver to platforms that use it
mmc: msm_sdcc: Limit driver to platforms that use it
usb: phy: msm: Move mach dependent code to platform data
Signed-off-by: Olof Johansson <olof@lixom.net>
The msm_serial_hs driver uses mach specific dma APIs. This is not
compatible with the multi-platform ARM effort. Let's only compile
this driver on MSM devices that are prepared to support it;
allowing the DT based MSM devices to enter the multi-platform ARM
build.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The msm_sdcc driver uses mach specific dma APIs. This is not
compatible with the multi-platform ARM effort. Let's only compile
this driver on MSM devices that are prepared to support it,
allowing the DT based MSM devices to enter the multi-platform ARM
build.
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch fix compilation error when driver is compiled
in multi-platform builds.
drivers/built-in.o: In function `msm_otg_link_clk_reset':
./drivers/usb/phy/phy-msm-usb.c:314: undefined reference to `clk_reset'
./drivers/usb/phy/phy-msm-usb.c:318: undefined reference to `clk_reset'
Use platform data supplied reset handlers and adjust error
messages reported when reset sequence fail.
This is an intermediate step before adding support for reset
framework and newer targets.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Instead of keeping a separate snd-page-alloc module, merge into the
core snd-pcm module, as we don't need to keep it as an individual
module due to the drop of page reservation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
From Linus Walleij:
Ux500 core patches for the v3.14 series:
- Enable PRINTK_TIME
- Enable suspend with WFI
* tag 'ux500-core-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Enable system suspend with WFI support
ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
From Christian Daudt, various defconfig udpates to bcm mobile.
* tag 'bcm-for-3.14-soc' of git://github.com/broadcom/bcm11351:
rename ARCH_BCM to ARCH_BCM_MOBILE (clocksource)
ARM: bcm_defconfig: Unset CONFIG_CRYPTO_ANSI_CPRNG
ARM: bcm_defconfig: Do not expect appended DTB
ARM: bcm_defconfig: CONFIG_OABI_COMPAT default off
Signed-off-by: Olof Johansson <olof@lixom.net>
Nowadays we have CMA for obtaining the contiguous memory pages
efficiently. Let's kill the old kludge for reserving the memory pages
for large buffers. It was rarely useful (only for preserving pages
among module reloading or a little help by an early boot scripting),
used only by a couple of drivers, and yet it gives too much ugliness
than its benefit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Broadwell and Haswell have the same behavior on display audio. So this patch
defines is_haswell_plus() to include codecs for both Haswell and its successor
Broadwell, and apply all Haswell fix-ups to Broadwell.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds codec ID (0x80862808) and module alias for Broadwell
display codec.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the device ID for Intel Broadwell display HD-Audio controller,
and applies Haswell properties to this device.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Delete some unused U8540 UART platform data.
- MMC/SD-fixes from Ulf Hansson so everything works with
the device tree again.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vC9c
-----END PGP SIGNATURE-----
Merge tag 'ux500-devicetree-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt
From Linus Walleij:
Ux500 device tree patches for v3.14, take 2
- Delete some unused U8540 UART platform data.
- MMC/SD-fixes from Ulf Hansson so everything works with
the device tree again.
* tag 'ux500-devicetree-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: regulators: Remove dead code for SD-card regulator
ARM: ux500: Configure regulator for I/O voltage for SD-card slot
ARM: ux500: Refactor common DT configs for sdi[n] devices
ARM: ux500: delete U8540 UART auxdata
Signed-off-by: Olof Johansson <olof@lixom.net>
Revert the addition of SSI clocks to DT for the
r8a7790 (R-Car H2) and r8a7791 (R-Car M2) SoCs.
Unfortunately these patches prevent booting the
r8a7790-based Lager board and r8a7791-based Koelsch board
to the point where a serial output is available.
A solution to this problem is being sought but has not
yet been finalised so in the mean time revert the changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQIcBAABAgAGBQJSy1+EAAoJENfPZGlqN0++jeQP/2iOdEyu6u7MW0Sz/4qy8Ak/
7jPl1czO9zsaB2nKmWTyqDvXeBIUONkvNs01vKAcc0/62xQ1AhKllkoBXsWkM9DP
gdQCsIj/FJYpLY3+H/Nndd+lMFv+HKHxh6QJp+R5EI4e8h2LOhYvW18pfRTnNOfK
MDattpOgnu0PyK9mPLXGupxxMxlMku1+5XwCBrycule66Bm8vsG4IQK65jKnZA7w
ND+8rd2k5ARM1hOxtRCHo6rJ4u1C6WSWSt2p8R9pvDQTPZPbX+FYz1GZ3YkvQxf7
pud4AuJHnhIccapaEHXP2/e8xryP13UDBj3PuLedbfiaoiji34QcHbwHyQQVhWrY
rzezzAOFhbT3fhLbp3urcECPlXC0BuJgTzXcZrX8LjIPm9GGqSe9QyKTVCl3CJcp
9+nvtNUtzcC2RtGvt4fnYAxgIr+lETsR3EGyeC4lk4gVY5EnCmxUxn0Ku74qJr80
BweuVLlkCJ7L+5ul4NcQlXnOh3DKQMLp2X+xQBzoNUv9VheafUqs5e7glVOlbALZ
353LSp92Ru6sMTB8jcsQqTFWMeOMz0z4Zwi9TNzRpxn1g93CroM8p6dLdMpLFwuQ
EApzBGutQuoLYepEz0U1J022xsJMJ8tuHxMfxU/vqpVmSGRD3aFdgywihv9hzvrq
8s+xeBLTFrJa90R7HZU9
=pTPp
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Renesas ARM Based SoC DT Fixes for v3.14
Revert the addition of SSI clocks to DT for the
r8a7790 (R-Car H2) and r8a7791 (R-Car M2) SoCs.
Unfortunately these patches prevent booting the
r8a7790-based Lager board and r8a7791-based Koelsch board
to the point where a serial output is available.
A solution to this problem is being sought but has not
yet been finalised so in the mean time revert the changes.
* tag 'renesas-dt-fixes-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"
Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree"
Signed-off-by: Olof Johansson <olof@lixom.net>
SiRF internal interrupts are using level trigger. we need to tell the irq
core this information. otherwise, we might get some problems as below
1. disable_irq(n)
here irq core will mark the disabled flag but still keep the irq enabled
due to involved lazy-disable
2. doing someting after disable_irq(n)
in step 2, if one interrupt n comes, irq core will mark it as pending and
mask the HW interrupt really. we name the coming interrupt as "X".
3. enable_irq(n)
this will unmask the interrupt, so the level-trigger HW interrupt will come
again, irq_handler will enter as "E1". after that, irq core will also check
whether irq n is pending, if yes, and pending interrupt is not level-trigger,
irq core will execute the pending irq_handler.
so if we don't set the IRQ_LEVEL flag here, irq core will execute pending
X again as "E2", but actually the pending interrupt has been handled by "E1".
that makes a level-trigger HW interrupt is executed twice.
here we fix the issue to avoid redundant interrupt overload.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Huayi Li <Huayi.Li@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
We expect to read firmware blobs with a single call to kernel_read(),
which returns int. Therefore the size must be within the range of
int, not long.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchset add new driver of extcon-max14577.c which detect various external
connector and fix minor issue of extcon provider driver(extcon-arizona/palams/
gpio.c). Also, update documentation of previous 'switch' porting guide and
extcon git repository url.
Detailed description for patchset:
- New driver of extcon-max14577.c
: Add extcon-max14577.c drvier to support Maxim MUIC(Micro USB Interface
Controller) which detect USB/TA/JIG/AUDIO-DOCK and additional accessory
according to each resistance when connected external connector.
- extcon-arizoan.c driver
: Code clean to use define macro instead of hex value
: Fix minor issue to reset back to our staring state
: Fix race with microphone detection and removal
- extcon-palmas.c driver
: Fix minor issue and renaming compatible string of Devicetree
- extcon-gpio.c driver
: Fix bug about ordering initialization of gpio pin on probe()
: Send uevent after wakeup from suspend state because some SoC
haven't wakeup interrupt on suspend state.
- Documentation (Documentation/extcon/porting-android-switch-class)
: Fix switch class porting guide
- Update extcon git repository url
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=eIUL
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for v3.14
This patchset add new driver of extcon-max14577.c which detect various external
connector and fix minor issue of extcon provider driver(extcon-arizona/palams/
gpio.c). Also, update documentation of previous 'switch' porting guide and
extcon git repository url.
Detailed description for patchset:
- New driver of extcon-max14577.c
: Add extcon-max14577.c drvier to support Maxim MUIC(Micro USB Interface
Controller) which detect USB/TA/JIG/AUDIO-DOCK and additional accessory
according to each resistance when connected external connector.
- extcon-arizoan.c driver
: Code clean to use define macro instead of hex value
: Fix minor issue to reset back to our staring state
: Fix race with microphone detection and removal
- extcon-palmas.c driver
: Fix minor issue and renaming compatible string of Devicetree
- extcon-gpio.c driver
: Fix bug about ordering initialization of gpio pin on probe()
: Send uevent after wakeup from suspend state because some SoC
haven't wakeup interrupt on suspend state.
- Documentation (Documentation/extcon/porting-android-switch-class)
: Fix switch class porting guide
- Update extcon git repository url
w.r.t PM and reference counting and also a new PHY driver used by SATA
in Marvell SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=/ecS
-----END PGP SIGNATURE-----
Merge tag 'for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next
Kishon writes:
Pull request for PHY subsystem contains few fixes in PHY-CORE mostly
w.r.t PM and reference counting and also a new PHY driver used by SATA
in Marvell SoC.
Sparse lists the following:
CHECK drivers/staging/rtl8188eu/core/rtw_br_ext.c
drivers/staging/rtl8188eu/core/rtw_br_ext.c:700:101: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:700:101: expected unsigned int *ipxNetAddr
drivers/staging/rtl8188eu/core/rtw_br_ext.c:700:101: got restricted __be32 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:700:123: warning: incorrect type in argument 3 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:700:123: expected unsigned short *ipxSocketAddr
drivers/staging/rtl8188eu/core/rtw_br_ext.c:700:123: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:705:99: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:705:99: expected unsigned int *ipxNetAddr
drivers/staging/rtl8188eu/core/rtw_br_ext.c:705:99: got restricted __be32 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:714:101: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:714:101: expected unsigned int *ipxNetAddr
drivers/staging/rtl8188eu/core/rtw_br_ext.c:714:101: got restricted __be32 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:714:121: warning: incorrect type in argument 3 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:714:121: expected unsigned short *ipxSocketAddr
drivers/staging/rtl8188eu/core/rtw_br_ext.c:714:121: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:721:99: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:721:99: expected unsigned int *ipxNetAddr
drivers/staging/rtl8188eu/core/rtw_br_ext.c:721:99: got restricted __be32 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:749:83: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:749:83: expected unsigned short *network
drivers/staging/rtl8188eu/core/rtw_br_ext.c:749:83: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:762:83: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:762:83: expected unsigned short *network
drivers/staging/rtl8188eu/core/rtw_br_ext.c:762:83: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:783:83: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:783:83: expected unsigned short *network
drivers/staging/rtl8188eu/core/rtw_br_ext.c:783:83: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:795:83: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:795:83: expected unsigned short *network
drivers/staging/rtl8188eu/core/rtw_br_ext.c:795:83: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:849:57: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:849:57: expected unsigned short [unsigned] [short] <noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:849:57: got restricted __be16 [usertype] <noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:92:23: warning: restricted __be16 degrades to integer
drivers/staging/rtl8188eu/core/rtw_br_ext.c:876:95: warning: incorrect type in argument 3 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:876:95: expected unsigned short *sid
drivers/staging/rtl8188eu/core/rtw_br_ext.c:876:95: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:912:45: warning: cast to restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:912:45: warning: cast to restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:912:45: warning: cast to restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:912:45: warning: cast to restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:944:112: warning: incorrect type in argument 3 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:944:112: expected unsigned short *sid
drivers/staging/rtl8188eu/core/rtw_br_ext.c:944:112: got restricted __be16 *<noident>
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1019:84: warning: incorrect type in argument 3 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1019:84: expected unsigned int [unsigned] [usertype] len
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1019:84: got restricted __be16 [usertype] payload_len
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1021:110: warning: incorrect type in argument 2 (different base types)
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1021:110: expected int [signed] len
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1021:110: got restricted __be16 [usertype] payload_len
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1145:54: warning: cast to restricted __be32
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1145:54: warning: cast to restricted __be32
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1145:54: warning: cast to restricted __be32
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1145:54: warning: cast to restricted __be32
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1145:54: warning: cast to restricted __be32
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1145:54: warning: cast to restricted __be32
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1148:70: warning: restricted __be16 degrades to integer
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1154:70: warning: invalid assignment: |=
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1154:70: left side has type unsigned short
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1154:70: right side has type restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1157:64: warning: cast to restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1157:64: warning: cast to restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1157:64: warning: cast to restricted __be16
drivers/staging/rtl8188eu/core/rtw_br_ext.c:1157:64: warning: cast to restricted __be16
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse reports the following warning:
CHECK drivers/staging/rtl8188eu/core/rtw_xmit.c
drivers/staging/rtl8188eu/core/rtw_xmit.c:809:23: warning: incorrect type in initializer (different base types)
drivers/staging/rtl8188eu/core/rtw_xmit.c:809:23: expected unsigned short [usertype] *fctrl
drivers/staging/rtl8188eu/core/rtw_xmit.c:809:23: got restricted __le16 *<noident>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse reports the following:
CHECK drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
drivers/staging/rtl8188eu/core/rtw_pwrctrl.c:525:6: warning: symbol 'rtw_free_pwrctrl_priv' was not declared. Should it be static?
That routine is not used and has been deleted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse reports the following:
CHECK drivers/staging/rtl8188eu/core/rtw_sta_mgt.c
drivers/staging/rtl8188eu/core/rtw_sta_mgt.c:152:6: warning: symbol 'rtw_mfree_all_stainfo' was not declared. Should it be static?
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two different enum statements that have been combined.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only handles RTL8188EU with USB interface, thus several hardware
defines and macros can be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only works with the USB bus. Accordingly, enum odm_interface_def
can be removed along with all code that uses ODM_ITRF_XXX, where XXX is not USB.
In enum odm_ic_type, only ODM_RTL8188E is used. Remove the enum, all references
to the others, and define the needed value.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This header contains a number of routines that do not to be available
globally. Once this change was made, a number of the routines were not
used, and could be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This member of struct odm_dm_struct is always set to ODM_RTL8188E for this
driver. Accordingly, the code can be simplified. A number of routines
now are no longer needed and are deleted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This member of struct odm_dm_struct is always set to ODM_CE in this driver.
As a result, a number of switch and if statements can be simplified. In
addition, a number of routines are no longer used and can be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull parisc fix from Helge Deller:
"This patch fixes the kmap/kunmap implementation on parisc and finally
makes AIO work on parisc"
* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Ensure full cache coherency for kmap/kunmap
Pull libata fixes from Tejun Heo:
"Late fixes for libata. Nothing too interesting. Adding missing PM
callbacks to satat_sis and an additional PCI ID for ahci"
* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata_sis: missing PM support
ahci: add PCI ID for Marvell 88SE9170 SATA controller
When system on the suspend state, Some SoC can't get gpio interrupt.
After system resume, need send extcon uevent to userspace.
Signed-off-by: Rongjun Ying <rongjun.ying@csr.com>
Reviewed-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch fixes memory leaks in the error paths of
nfcmrvl_nci_register_dev() routine.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This is equivalent to PHY_GetBBReg.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the same as macro PHY_SetBBReg.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This one is a duplicate od macro PHY_QueryRFReg.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is a duplicate of macro PHY_SetRFReg.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This one is a duplicate of PHY_QueryBBReg.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is essentially a duplicate of macro PHY_SetBBReg
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Any routines that are empty as a result of these changes are also removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
