When we use plain 'perf buildid-list' we use only what is in the buildid
table in the perf.data header. And those have absolute pathnames because
at 'perf record' time we used __perf_session__process_events and that
doesn't sets up the path shortening code in map__new() that happens if
symbol_conf.full_paths is false, the default.
On the other hand, when we use 'perf buildid-list --with-hits' we
process all the events using perf_session__process_events, adding
entries to the global DSO list _after_ removing the current directory
from the DSO name, for presentation purposes.
Because of that we end up having two entries in the DSO list when
recording events for binaries using relative pathnames.
Fix it minimally by setting symbol_conf.full_paths to true when marking
the DSOs with hits in 'perf buildid-list --with-hits', as used by 'perf
archive'
Right fix longer term is to shorten the path only at presentation time.
Will be done for 2.6.36.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100601183837.GC4093@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
trace_unhandled() callback does not allow to access event fields, this patch
resolves the problem.
It can also been used as a more pythonic and flexible way for script writters
to demux event types
This will for example greatly simplify pytimechart event demux.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1275340329-2397-1-git-send-email-tardyp@gmail.com>
Signed-off-by: Pierre Tardy <tardyp@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hist_entry__annotate() runs objdump with -S option so the output may contain
lines of any format. If a line starts with a colon strtoull() returns 0 and
calculated offset will be negative. This causes perf annotate segfaults.
Make sure that strtoull() has parsed at least one digit.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Konstantin Stepanyuk <konstantin.stepanyuk@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When forking the child to be traced, we should check the correct
return value from fork() and not a local variable which is otherwise
unused.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100531211818.GA30175@liondog.tnic>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
event__process_task() doesn't propagate the comm copy on clone,
but only on process fork. So we loose all the tid:comm resolution
for tasks that aren't a main process thread.
Progragate the per thread granularity to event__process_task for
pid resolution.
This fixes various unresolved pids in perf sched, especially when
we trace multithread processes. The problem is quickly reproducible
with the messaging benchmark using the multithread mode "-t" :
perf sched record perf bench sched messaging -t
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
perf sched uses event__process_comm(), which means it can resolve
comms from:
- tasks that have exec'ed (kernel comm events)
- tasks that were running when perf record started the actual
recording (synthetized comm events)
But perf sched can't resolve the pids of tasks that were created
after the recording started.
To solve this, we need to inherit the comms on fork events using
event__process_task().
This fixes various unresolved pids in perf sched, easily visible
with:
perf sched record perf bench sched messaging
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
When we synthetize the existing running tasks though procfs,
we walk through every threads of a process, queuing one comm
events per tid.
But then on report time, event__process_comm() only creates and
sets the comm on a per process granularity. This is the right
thing for comm events that came from the kernel, as they are
only created on exec. Sub-threads then inherit their comm
from fork events. But that doesn't work with our synthetized
comm events taken from procfs informations as the per thread
granularity is done on comm events directly there.
Hence we need event__process_comm() to work with the tid rather
than the pid. It won't change anything for comm events coming
from the kernel but this will fix the synthetized ones.
Before:
$ ./perf report -D | grep COMM | grep firefox
0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5297
After:
$ ./perf report -D | grep COMM | grep firefox
0x2c7b8 [0x18]: PERF_RECORD_COMM: firefox:5297
0x2c7d0 [0x18]: PERF_RECORD_COMM: firefox:5299
0x2c7e8 [0x18]: PERF_RECORD_COMM: firefox:5300
0x2c800 [0x18]: PERF_RECORD_COMM: firefox:5308
0x2c818 [0x18]: PERF_RECORD_COMM: firefox:5309
0x2c830 [0x18]: PERF_RECORD_COMM: firefox:5312
This fixes various unresolved pid on perf sched.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tui: Fix last use_browser problem related to .perfconfig
perf symbols: Add the build id cache to the vmlinux path
perf tui: Reset use_browser if stdout is not a tty
ring-buffer: Move zeroing out excess in page to ring buffer code
ring-buffer: Reset "real_end" when page is filled
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
tracing: Add __used annotation to event variable
perf, trace: Fix !x86 build bug
perf report: Support multiple events on the TUI
perf annotate: Fix up usage of the build id cache
x86/mmiotrace: Remove redundant instruction prefix checks
perf annotate: Add TUI interface
perf tui: Remove annotate from popup menu after failure
perf report: Don't start the TUI if -D is used
perf: Fix getline undeclared
perf: Optimize perf_tp_event_match()
perf: Remove more code from the fastpath
perf: Optimize the !vmalloc backed buffer
perf: Optimize perf_output_copy()
perf: Fix wakeup storm for RO mmap()s
perf-record: Share per-cpu buffers
perf-record: Remove -M
perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
...
When we moved to using ~/.perfconfig to set the value of use_browser,
it changed from a boolean to an int so that the convention used for
use_pager was followed.
That convention is:
-1: unspecified, that is what use_{browser,pager} is initialized
0: Don't use the browser (should be TUI), because was explicitely
set to 0/off/false on ~/.perfconfig [tui] cmd =, or because
we're redirecting the stdout to a file or piping it to some
other command (!isatty()).
1: Use the TUI
Some code was not properly audited and continued testing it as a
boolean, this seems to be the last one.
Reported-by: Frédéric Weisbecker <fweisbec@gmail.com>
Tested-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that if the kernel DSO has a build id because record inserted it in
the perf.data build id table in the header, or a BUILD_ID event was
inserted in the stream, we first look at the build id cache
($HOME/.debug/).
If we find it there, try to use it, allowing offline annotation in
addition to 'perf report'.
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The newt initialization routines weren't being called because the output
was a file (perf annotate > /tmp/bla) but use_browser was still 1,
because ~/.perfconfig had it as 'on', so, later on newt routines
segfaulted.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__tty_browse_tree function was created with the loop to print
all events, and its equivalent, hists__tui_browse_tree, was created in a
similar fashion, where it is possible to switch among the multiple
events, if present, using TAB to go the next event, and shift+TAB
(UNTAB) to go to the previous.
The report TUI now shows as the window title the name of the event and a
leak was fixed wrt pstacks.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was assuming that the cache was always available and also wasn't
checking if the file found in the build id cache was just a kallsyms
file, that is not supported by objdump for disassembly.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When annotating multiple entries, for instance, when running simply as:
$ perf annotate
the right and left keys, as well as TAB can be used to cycle thru the
multiple symbols being annotated.
If one doesn't like TUI annotate, disable it by editing ~/.perfconfig
and adding:
[tui]
annotate = off
Just like it is possible for report.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One day we'll have support for the "dump raw trace in ASCII" in the TUI
frontend, but till then, use the tty code.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to have stdio.h included with _GNU_SOURCEfopr getline,
which is broken with the inclusion of build-id.h.
Keep util.h included first in hist.c
Fixes:
util/hist.c: Dans la fonction «hist_entry__parse_objdump_line» :
util/hist.c:938: attention : déclaration implicite de la fonction « «getline» »
util/hist.c:938: attention : nested extern declaration of «getline»
make: *** [util/hist.o] Erreur 1
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1274438919-5104-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It seems a waste of space to create a buffer per
event, share it per-cpu.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.634824884@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since it is not allowed to create cross-cpu (or
cross-task) buffers, this option is no longer valid.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.582740993@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using the same scheme as for git's/perf's pager setup, i.e. if one
doesn't want to, on a newt enabled perf binary, to disable the TUI for
'perf report', its just a matter of doing:
[root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" >
/root/.perfconfig
[root@doppio linux-2.6-tip]# cat /root/.perfconfig
[tui]
report = off
[root@doppio linux-2.6-tip]#
System wide settings are also possible, by editing /etc/perfconfig, etc,
i.e. the git machinery for config files applies to perf as well, so when
in doubt where to put your settings, consult the git documentation, if
it fails, please let us know.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Discussed-with: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf record repeatedly calls gettimeofday() which adds noise to the performance
measurements. Since gettimeofday() is only used for the error printf, delete
it.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100518225240.GC25589@sgi.com>
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The FunctionFS gadget may provide the source/sink interface
not as the first interface (with id == 0) but some different
interface hence a code to find the interface number is
required.
(Note that you will still configure the gadget to report
idProduct == 0xa4a4 (an "echo 0xa4a4
>/sys/module/g_ffs/parameters/usb_product" should suffice) or
configure host to handle 0x0525:0xa4ac devices using the
usbtest driver.)
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The testusb program just issues ioctls to perform the tests
implemented by the kernel driver. It can generate a variety
of transfer patterns; you should make sure to test both regular
streaming and mixes of transfer sizes (including short transfers).
For more information on how this can be used and on USB testing
refer to <URL:http://www.linux-usb.org/usbtest/>.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds an example user-space FunctionFS driver which
implements a source/sink interface used for testing.
Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We were still using the pathname found on the MMAP event, that could not
be the one we used when recording, so use the build-id cache for that,
only falling back to use the pathname in the MMAP event if no build-ids
are available.
With this we now also are able to do secure, seamless offline annotation.
Example:
[root@doppio linux-2.6-tip]# perf report -g none -v 2> /dev/null | head -10
8.12% Xorg /usr/lib64/libpixman-1.so.0.14.0 0x0000000000026d02 B [.] pixman_rasterize_edges
4.68% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005dbdba B [.] 0x000000005dbdba
3.70% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet
2.96% init /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff81022cea ! [k] read_hpet
2.73% swapper /lib/modules/2.6.34-rc6/build/vmlinux 0xffffffff8100a738 ! [k] mwait_idle_with_hints
[root@doppio linux-2.6-tip]# perf annotate -v pixman_rasterize_edges 2>&1 | grep Executing
Executing: objdump --start-address=0x000000371ce26670 --stop-address=0x000000371ce2709f -dS /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|grep -v /root/.debug/.build-id/bd/6ac5199137aaeb279f864717d8d061477466c1|expand
[root@doppio linux-2.6-tip]# perf buildid-list | grep libpixman-1.so.0.14.0
bd6ac5199137aaeb279f864717d8d061477466c1 /usr/lib64/libpixman-1.so.0.14.0
[root@doppio linux-2.6-tip]#
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like if one is using the stdio based pager, or more/less, for that
matter.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Accessing trace values of an 8 size may end up in a segfault
on archs that can't deal with misaligned access, which is the
case for sparc 64. This is because PERF_SAMPLE_RAW are aligned
to 4 and not to 8.
Fix this on the macros that get the values of 8 size.
This fixes segfaults on perf tools in sparc 64.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: David Miller <davem@davemloft.net>
This is a small fix for a problem affecting live-mode, introduced
recently:
root@tropicana:~# perf trace rwtop
perf trace started with Perl
script /root/libexec/perf-core/scripts/perl/rwtop.pl
Fatal: did not read header event
commit d00a47cce5 added a skip()
function to skip over e.g. header_page, but this doesn't work for
live mode. This patch re-implements skip() to use read() instead of
lseek() to fix that.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1273032130.6383.28.camel@tropicana>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The changes made to support host and guest machines in a session, that
started when the 'perf kvm' tool was introduced ended up introducing a
bug where the host_machine was not having its DSOs traversed for
build-id processing.
Fix it by moving some methods to the right classes and considering the
host_machine when processing build-ids.
Reported-by: Tom Zanussi <tzanussi@gmail.com>
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __dsos__read_build_ids if the dso already had its build-id read,
don't try again.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All the functions that call this can handle the equivalent, non
panic'ing wrapped routines.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Functions that were calling xzalloc also returned -1 when, for other
reasons, it could fail, and the calleds are coping with failures, so
stop using die() and xzalloc().
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That could leave filedescriptors open and leak memory. Also stop using
xmalloc, use malloc and handle results just like other error cases in
the same routine that used it.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without the bloated cplus_demangle from binutils, i.e building with:
$ make NO_DEMANGLE=1 O=~acme/git/build/perf -j3 -C tools/perf/ install
Before:
text data bss dec hex filename
471851 29280 4025056 4526187 45106b /home/acme/bin/perf
After:
[acme@doppio linux-2.6-tip]$ size ~/bin/perf
text data bss dec hex filename
446886 29232 4008576 4484694 446e56 /home/acme/bin/perf
So its a 5.3% size reduction in code, but the interesting part is in the git
diff --stat output:
19 files changed, 20 insertions(+), 1909 deletions(-)
If we ever need some of the things we got from git but weren't using, we just
have to go to the git repo and get fresh, uptodate source code bits.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is hard to read very large numbers so provide an option to perf stat
to separate thousands using a separator. The patch leverages the locale
support of stdio. You need to set your LC_NUMERIC appropriately, for
instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this
feature. This way existing scripts parsing the output do not need to be
changed. Here is an example.
$ perf stat noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.347031 task-clock-msecs # 0.998 CPUs
61 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
118 page-faults # 0.000 M/sec
4,138,410,900 cycles # 2070.917 M/sec (scaled from 70.01%)
2,062,650,268 instructions # 0.498 IPC (scaled from 70.01%)
2,057,653,466 branches # 1029.678 M/sec (scaled from 70.01%)
40,267 branch-misses # 0.002 % (scaled from 30.04%)
2,055,961,348 cache-references # 1028.831 M/sec (scaled from 30.03%)
53,725 cache-misses # 0.027 M/sec (scaled from 30.02%)
2.001393933 seconds time elapsed
$ perf stat -B noploop 2
noploop for 2 seconds
Performance counter stats for 'noploop 2':
1998.297883 task-clock-msecs # 0.998 CPUs
59 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
119 page-faults # 0.000 M/sec
4,131,380,160 cycles # 2067.450 M/sec (scaled from 70.01%)
2,059,096,507 instructions # 0.498 IPC (scaled from 70.01%)
2,054,681,303 branches # 1028.216 M/sec (scaled from 70.01%)
25,650 branch-misses # 0.001 % (scaled from 30.05%)
2,056,283,014 cache-references # 1029.017 M/sec (scaled from 30.03%)
47,097 cache-misses # 0.024 M/sec (scaled from 30.02%)
2.001391016 seconds time elapsed
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
perf tools: Add mode to build without newt support
perf symbols: symbol inconsistency message should be done only at verbose=1
perf tui: Add explicit -lslang option
perf options: Type check all the remaining OPT_ variants
perf options: Type check OPT_BOOLEAN and fix the offenders
perf options: Check v type in OPT_U?INTEGER
perf options: Introduce OPT_UINTEGER
perf tui: Add workaround for slang < 2.1.4
perf record: Fix bug mismatch with -c option definition
perf options: Introduce OPT_U64
perf tui: Add help window to show key associations
perf tui: Make <- exit menus too
perf newt: Add single key shortcuts for zoom into DSO and threads
perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
perf newt: Fix the 'A'/'a' shortcut for annotate
perf newt: Make <- exit the ui_browser
x86, perf: P4 PMU - fix counters management logic
perf newt: Make <- zoom out filters
perf report: Report number of events, not samples
perf hist: Clarify events_stats fields usage
...
Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks the
build if it isn't defined. Use the equivalent one that glibc has on
features.h.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check elfutils version, and if it is old don't compile CFI analysis code. This
allows to compile perf with old elfutils.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Reported-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100510171207.26029.97604.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
make NO_NEWT=1
Will avoid building the newt (tui) support.
Suggested-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That happened for an old perf.data file that had no fake MMAP events for
the kernel modules, but even then it should warn once for each module,
not one time for every symbol in every module not found.
Reported-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At least on rawhide using -lnewt is not enough if we use SLang routines
directly, so add an explicit -lslang since we use SLang routines.
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OPT_SET_INT was renamed to OPT_SET_UINT since the only use in these
tools is to set something that has an enum type, that is builtin
compatible with unsigned int.
Several string constifications were done to make OPT_STRING require a
const char * type.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid problems like the one fixed by Stephane Eranian in 3de29ca, now
we'll got this instead:
bench/sched-messaging.c:259: error: negative width in bit-field ‘<anonymous>’
bench/sched-messaging.c:261: error: negative width in bit-field ‘<anonymous>’
Which is rather cryptic, but is how BUILD_BUG_ON_ZERO works, so kernel
hackers should be already used to this.
With it in place found some problems, fixed by changing the affected
variables to sensible types or changed some OPT_INTEGER to OPT_UINTEGER.
Next csets will go thru converting each of the remaining OPT_ so that
review can be made easier by grouping changes per type per patch.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For unsigned int options to be parsed, next patches will make use of it.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older versions of the slang library didn't used the 'const' specifier,
causing problems with modern compilers of this kind:
util/newt.c:252: error: passing argument 1 of ‘SLsmg_printf’ discards
qualifiers from pointer target type
Fix it by using some wrappers that when needed const the affected
parameters back to plain (char *).
Reported-by: Lin Ming <ming.m.lin@intel.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100517145421.GD29052@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -c option defines the user requested sampling period. It was implemented
using an unsigned int variable but the type of the option was OPT_LONG. Thus,
the option parser was overwriting memory belonging to other variables, namely
the mmap_pages leading to a zero page sampling buffer. The bug was exposed only
when compiling at -O0, probably because the compiler was padding variables at
higher optimization levels.
This patch fixes this problem by declaring user_interval as u64. This also
avoids wrap-around issues for large period on 32-bit systems.
Commiter note:
Made it use OPT_U64(user_interval) after implementing OPT_U64 in the
previous patch.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4bf11ae9.e88cd80a.06b0.ffffa8e3@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have things like user_interval (-c/--count) in 'perf record' that
needs this.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In fact it is now added to the hot key list when newt_form__new is used,
allowing us to remove the explicit assignment in all its users.
The visible change is that <- will exit the menu that pops up when -> is
pressed (and Enter when callchains are not being used).
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'D'/'d' for zooming into the DSO in the current highlighted hist entry,
'T'/'t' for zooming into the current thread.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now that means that pressing the left arrow willl make the symbol
annotation window to exit back to the main symbol histogram browser.
This is another improvement on the UI fastpath, i.e. just the arrows and
enter are enough for most browsing.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After we use the filters to zoom into DSOs or threads, we can use <-
(left arrow) to zoom out from the last filter applied.
It is still possible to zoom out of order by using the popup menu.
With this we now have the zoom out operation on the browsing fast path,
by allowing fast navigation using just the four arrors and the enter key
to expand collapse callchains.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Number of samples is meaningless after we switched to auto-freq, so
report the number of events, i.e. not the sum of the different periods,
but the number PERF_RECORD_SAMPLE emitted by the kernel.
While doing this I noticed that naming "count" to the sum of all the
event periods can be confusing, so rename it to .period, just like in
struct sample.data, so that we become more consistent.
This helps with the next step, that was to record in struct hist_entry
the number of sample events for each instance, we need that because we
use it to generate the number of events when applying filters to the
tree of hist entries like it is being done in the TUI report browser.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The events_stats.total field is too generic, rename it to .total_period,
and also add a comment explaining that it is the sum of all the .period
fields in samples, that is needed because we use auto-freq to avoid
sampling artifacts.
Ditto for events_stats.lost, that is the sum of all lost_event.lost
fields, i.e. the number of events the kernel dropped.
Looking at the users, builtin-sched.c can make use of these fields and
stop doing it again.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is one more thing that started global but are more useful per hist
or per session.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
option option -> option
special special -> special
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1273747165-17242-1-git-send-email-kirr@mns.spb.ru>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default, event inheritance across fork and pthread_create was on but the -i
option of stat and record, which enabled inheritance, led to believe it was off
by default.
This patch fixes this logic by inverting the meaning of the -i option. By
default inheritance is on whether you attach to a process (-p), a thread (-t)
or start a process. If you pass -i, then you turn off inheritance. Turning off
inheritance if you don't need it, helps limit perf resource usage as well.
The patch also fixes perf stat -t xxxx and perf record -t xxxx which did not
start the counters.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4bea9d2f.d60ce30a.0b5b.08e1@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hist.c needs to include util.h so that it gets stdio.h
inclusion with __GNU_SOURCE defined.
Fixes:
util/hist.c: In function ‘hist_entry__parse_objdump_line’:
util/hist.c:931: erreur: implicit declaration of function ‘getline’
util/hist.c:931: erreur: nested extern declaration of ‘getline’
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1273772836-11533-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix mistake in a parameter type of the no-newt hists__browse()
version.
Fixes:
builtin-report.c: In function ‘__cmd_report’:
builtin-report.c:314: erreur: incompatible type for argument 1 of ‘hists__browse’
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1273771378-8577-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Usually "_text" is enough, but I received reports that its not always
available, so fallback to "_stext" for the symbol we use to check if we
need to apply any relocation to all the symbols in the kernel symtab,
for when, for instance, kexec is being used.
Reported-by: Darren Hart <dvhltc@us.ibm.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now we don't anymore use popen to run 'perf annotate' for the selected
symbol, instead we collect per address samplings when processing samples
in 'perf report' if we're using the newt browser, then we use this data
directly to do annotation.
Done this way we can actually traverse the objdump_line objects
directly, matching the addresses to the collected samples and colouring
them appropriately using lower level slang routines.
The new ui_browser class will be reused for the main, callchain aware,
histogram browser, when it will be made generic and don't assume that
the objects are always instances of the objdump_line class maintained
using list_heads.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Initially this was just to be able to have a printf like method to
prepare the formatted string and then pass to newtPushHelpLine, but as
we already have for ui_progress, etc, its a step in identifying a
restricted, highlevel set of widgets we can then have implementations
for multiple widget sets (GTK, etc).
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For Fedora, I want to force perf to link against libiberty.a for
cplus_demangle, rather than libbfd.a for bfd_demangle due to licensing insanity
on binutils. (libiberty is LGPL2, libbfd is GPL3.)
If we just rely on autodetection, we'll end up with libbfd linked against us,
since they're both in binutils-static in the buildroot.
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100510204335.GA7565@bombadil.infradead.org>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check whether elfutils is older than 0.138 (from which version checking
routine has been introduced). And if so, set NO_DWARF because it is hard
to check the API dependency without version checking.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Robert Richter <robert.richter@amd.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100511045953.9913.19485.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are really not specific to the newt code, can be used by other UI
frontends.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The raw_field_ptr() helper, used to retrieve the address of a field
inside a trace event, treats every strings as if they were dynamic
ie: having a secondary level of indirection to retrieve their
contents.
FIELD_IS_STRING doesn't mean FIELD_IS_DYNAMIC, we only need to
compute the secondary dereference for the latter case.
This fixes perf sched segfaults, bad cmdline report and may be
some other bugs.
Reported-by: Jason Baron <jbaron@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
A small fix for the syscall counts script:
- silence the match output in the shell script
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-10-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A small fix for the syscall counts by pid script:
- silence the match output in the shell script
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-9-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A small fixe for the failed syscalls by pid script:
- silence the match output in the shell script
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only print the script start/stop messages in verbose mode - users
normally don't care and it just clutters up the output.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-7-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some minor fixes for the workqueue-stats script:
- Fix nuisance 'use of uninitialized value' warnings
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A couple of fixes for the rwtop script:
- printing the totals and clearing the hashes in the signal handler
eventually leads to various random and serious problems when running
the rwtop script continuously. Moving the print_totals() calls to
the event handlers solves that problem, and the event handlers are
invoked frequently enough that it doesn't affect the timeliness of
the output.
- Fix nuisance 'use of uninitialized value' warnings
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Message-Id: <1273466820-9330-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some minor fixes for the rw-by-pid script:
- Fix nuisance 'use of uninitialized value' warnings
- Change the failed read/write sections to sort by error counts
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A couple small fixes for the failed syscalls script:
- The script description says it can be restricted to a specific comm,
make it so.
- silence the match output in the shell script
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Better done when we are adding entries, be it initially of when we're
re-sorting the histograms.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In cbbc79a we introduced support for multiple events by introducing a
new "event_stat_id" struct and then made several perf_session methods
receive a point to it instead of a pointer to perf_session, and kept the
event_stats and hists rb_tree in perf_session.
While working on the new newt based browser, I realised that it would be
better to introduce a new class, "hists" (short for "histograms"),
renaming the "event_stat_id" struct and the perf_session methods that
were really "hists" methods, as they manipulate only struct hists
members, not touching anything in the other perf_session members.
Other optimizations, such as calculating the maximum lenght of a symbol
name present in an hists instance will be possible as we add them,
avoiding a re-traversal just for finding that information.
The rationale for the name "hists" to replace "event_stat_id" is that we
may have multiple sets of hists for the same event_stat id, as, for
instance, the 'perf diff' tool has, so event stat id is not what
characterizes what this struct and the functions that manipulate it do.
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using machines__create_kernel_maps(..., HOST_KERNEL_ID) it would create
another machine instance for the host machine, and since 1f626bc we have
it out of the machines rb_tree.
Fix it by using machine__create_kernel_maps(&self->host_machine)
directly.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of newtAddComponents(just-one-entry, NULL), that is not needed
if, like in this browser, we're adding just one component at a time.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Works by adding a third parameter to the '-g' argument, after the graph
type and minimum percentage, for example:
[root@doppio linux-2.6-tip]# perf report -g fractal,0.5,2
Will show only the first two symbols where at least 0.5% of the samples
took place.
All the other symbols that don't fall outside these constraints will be
put together in the last entry, prefixed with "[...]" and the total
percentage for them.
Suggested-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have just one host on a given session, and that is the most common
setup right now, so embed a ->host_machine struct machine instance
directly in the perf_session class, check if we're looking for it before
going to the rb_tree.
This also fixes a problem found when we try to process old perf.data
files where we didn't have MMAP events for the kernel and modules and
thus don't create the kernel maps, do it in event__preprocess_sample if
it wasn't already.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Which can happen when processing old files that had no fake kernel MMAP,
events.
That shouldn't result in perf_session__create_kernel_maps not being
called, this will be fixed in a followup patch, for now do these checks
to avoid segfaulting.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By using BITS_PER_LONG / 4, that is the number of chars that will be
used in such cases as the DSO "name".
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch drops "-a" from the default arguments passed to
perf record by perf lock.
If a user wants to do a system wide record of lock events,
perf lock record -a <program> <argument> ...
is enough for this purpose.
This can reduce the size of the perf.data file.
% sudo ./perf lock record whoami
root
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.439 MB perf.data (~19170 samples) ]
% sudo ./perf lock record -a whoami # with -a option
root
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 48.962 MB perf.data (~2139197 samples) ]
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: Message-Id: <1273306229-5216-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
And with that fix at least one bug:
The first hit for an entry, the one that calls malloc to create a new
instance in __perf_session__add_hist_entry, wasn't adding the count to
the per cpumode (PERF_RECORD_MISC_USER, etc) total variable.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some events, such as the PERF_RECORD_FINISHED_ROUND event consist of
only an event header and no data. In this case, a 0-length payload
will be read, and the 0 return value will be wrongly interpreted as an
'unexpected end of event stream'.
This patch allows for proper handling of data-less events by skipping
0-length reads.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1273038527.6383.51.camel@tropicana>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When a lock is acquired after beeing contended, we update the
wait time statistics for the given lock.
But if the min wait time is updated, we don't check the max wait
time. This is wrong because the first time we update the wait time,
we want to update both min and max wait time.
Before:
Name acquired contended total wait (ns) max wait (ns) min wait (ns)
key 8 1 21656 0 21656
After:
Name acquired contended total wait (ns) max wait (ns) min wait (ns)
key 8 1 21656 21656 21656
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Fix the cast made to get the bad rate. It is made in the result
instead of the operands. We need the operands to be cast in double,
otherwise the result will always be zero.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Use enum to get a human view of bad_hist indexes and
put bad histogram output in its own function.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
This adds the "info" subcommand to perf lock which can be used
to dump metadata like threads or addresses of lock instances.
"map" was removed because info should do the work for it.
This will be useful not only for debugging but also for ordinary
analyzing.
v2: adding example of usage
% sudo ./perf lock info -t
| Thread ID: comm
| 0: swapper
| 1: init
| 18: migration/5
| 29: events/2
| 32: events/5
| 33: events/6
...
% sudo ./perf lock info -m
| Address of instance: name of class
| 0xffff8800b95adae0: &(&sighand->siglock)->rlock
| 0xffff8800bbb41ae0: &(&sighand->siglock)->rlock
| 0xffff8800bf165ae0: &(&sighand->siglock)->rlock
| 0xffff8800b9576a98: &p->cred_guard_mutex
| 0xffff8800bb890a08: &(&p->alloc_lock)->rlock
| 0xffff8800b9522a08: &(&p->alloc_lock)->rlock
| 0xffff8800bb8aaa08: &(&p->alloc_lock)->rlock
| 0xffff8800bba72a08: &(&p->alloc_lock)->rlock
| 0xffff8800bf18ea08: &(&p->alloc_lock)->rlock
| 0xffff8800b8a0d8a0: &(&ip->i_lock)->mr_lock
| 0xffff88009bf818a0: &(&ip->i_lock)->mr_lock
| 0xffff88004c66b8a0: &(&ip->i_lock)->mr_lock
| 0xffff8800bb6478a0: &(shost->host_lock)->rlock
v3: fixed some problems Frederic pointed out
* better rbtree tracking in dump_threads()
* removed printf() and used pr_info() and pr_debug()
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <1272863520-16179-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The current events reordering algorithm is based on a heuristic that
gets broken once we deal with a very fast flow of events.
Indeed the time period based flushing is not suitable anymore
in the following case, assuming we have a flush period of two
seconds.
CPU 0 | CPU 1
|
cnt1 timestamps | cnt1 timestamps
|
0 | 0
1 | 1
2 | 2
3 | 3
[...] | [...]
4 seconds later
If we spend too much time to read the buffers (case of a lot of
events to record in each buffers or when we have a lot of CPU buffers
to read), in the next pass the CPU 0 buffer could contain a slice
of several seconds of events. We'll read them all and notice we've
reached the period to flush. In the above example we flush the first
half of the CPU 0 buffer, then we read the CPU 1 buffer where we
have events that were on the flush slice and then the reordering
fails.
It's simple to reproduce with:
perf lock record perf bench sched messaging
To solve this, we use a new solution that doesn't rely on an
heuristical time slice period anymore but on a deterministic basis
based on how perf record does its job.
perf record saves the buffers through passes. A pass is a tour
on every buffers from every CPUs. This is made in order: for
each CPU we read the buffers of every counters. So the more
buffers we visit, the later will be the timstamps of their events.
When perf record finishes a pass it records a
PERF_RECORD_FINISHED_ROUND pseudo event.
We record the max timestamp t found in the pass n. Assuming these
timestamps are monotonic across cpus, we know that if a buffer
still has events with timestamps below t, they will be all available
and then read in the pass n + 1.
Hence when we start to read the pass n + 2, we can safely flush every
events with timestamps below t.
============ PASS n =================
CPU 0 | CPU 1
|
cnt1 timestamps | cnt2 timestamps
1 | 2
2 | 3
- | 4 <--- max recorded
============ PASS n + 1 ==============
CPU 0 | CPU 1
|
cnt1 timestamps | cnt2 timestamps
3 | 5
4 | 6
5 | 7 <---- max recorded
Flush every events below timestamp 4
============ PASS n + 2 ==============
CPU 0 | CPU 1
|
cnt1 timestamps | cnt2 timestamps
6 | 8
7 | 9
- | 10
Flush every events below timestamp 7
etc...
It also works on perf.data versions that don't have
PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that
the events will be only flushed in the end of the perf.data
processing. It will then consume more memory and scale less with
large perf.data files.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
In order to provide a more rubust and deterministic reordering
algorithm, we need to know when we reach a point where we just
did a pass through over every counter buffers to read every thing
they had.
This patch introduces a new PERF_RECORD_FINISHED_ROUND pseudo event
that only consist in an event header and doesn't need to contain
anything.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
This patch improves 'perf report -h' output for the
'--call-graph' command line option by enumerating the
different output types.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1273332783-4268-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It was x86 specific and imcomplete at that, improve the situation by
making it clear where the example provided applies and by adding the
URLs for the Intel and AMD manuals where this is discussed in depth.
Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Reported-by: Robert Richter <robert.richter@amd.com
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_event_attr::precise to perf_event_attr::precise_ip and
widen it to 2 bits. This new field describes the required precision of
the PERF_SAMPLE_IP field:
0 - SAMPLE_IP can have arbitrary skid
1 - SAMPLE_IP must have constant skid
2 - SAMPLE_IP requested to have 0 skid
3 - SAMPLE_IP must have 0 skid
And modify the Intel PEBS code accordingly. The PEBS implementation
now supports up to precise_ip == 2, where we perform the IP fixup.
Also s/PERF_RECORD_MISC_EXACT/&_IP/ to clarify its meaning, this bit
should be set for each PERF_SAMPLE_IP field known to match the actual
instruction triggering the event.
This new scheme allows for a PEBS mode that uses the buffer for more
than a single event.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using explanation given by Ingo Molnar in the oprofile mailing list.
Suggested-by: Nick Black <dank@qemfd.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Black <dank@qemfd.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a couple of inefficiencies and redundancies related to
have_tracepoints() and its use when checking whether to write
TRACE_INFO.
First, there's no need to use get_tracepoints_path() in
have_tracepoints() - we really just want the part that checks whether
any attributes correspondo to tracepoints.
Second, we really don't care about raw_samples per se - tracepoints
are always raw_samples. In any case, the have_tracepoints() check
should be sufficient to decide whether or not to write TRACE_INFO.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1273030770.6383.6.camel@tropicana>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first was always using the ->long_name, while the later used
->short_name if verbose was not set, resulting in the dso column to be
much wider than needed most of the time.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On a large machine we spend a lot of time in perf_header__find_attr when
running perf report.
If we are parsing a file without PERF_SAMPLE_ID then for each sample we call
perf_header__find_attr and loop through all counter IDs, never finding a match.
As the machine gets larger there are more per cpu counters and we spend an
awful lot of time in there.
The patch below initialises each sample id to -1ULL and checks for this in
perf_header__find_attr. We may need to do something more intelligent eventually
(eg a hash lookup from counter id to attr) but this at least fixes the most
common usage of perf report.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Acked-by: Eric B Munson <ebmunson@us.ibm.com>
LKML-Reference: <20100504111915.GB14636@kryten>
Signed-off-by: Anton Blanchard <anton@samba.org>
--
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New commands need to have Documentation and be added to command-list.txt
so that they can appear when 'perf' is called withouth any subcommand:
[root@doppio linux-2.6-tip]# perf
usage: perf [--version] [--help] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
archive Create archive with object files with build-ids found in perf.data file
bench General framework for benchmark suites
buildid-cache Manage build-id cache.
buildid-list List the buildids in a perf.data file
diff Read two perf.data files and display the differential profile
inject Filter to augment the events stream with additional information
kmem Tool to trace/measure kernel memory(slab) properties
kvm Tool to trace/measure kvm guest os
list List all symbolic event types
lock Analyze lock events
probe Define new dynamic tracepoints
record Run a command and record its profile into perf.data
report Read perf.data (created by perf record) and display the profile
sched Tool to trace/measure scheduler properties (latencies)
stat Run a command and gather performance counter statistics
test Runs sanity tests.
timechart Tool to visualize total system behavior during a workload
top System profiling tool.
trace Read perf.data (created by perf record) and display trace output
See 'perf help COMMAND' for more information on a specific command.
[root@doppio linux-2.6-tip]#
The new 'perf inject' command hadn't so it wasn't appearing on that list.
Also fix the long option, that should have no spaces in it, rename the faulty one
to be '--build-ids', instead of '--inject build-ids'.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current perf code implicitly assumes SAMPLE_RAW means tracepoints
are being used, but doesn't check for that. It happily records the
TRACE_INFO even if SAMPLE_RAW is used without tracepoints, but when the
perf data is read it won't go any further when it finds TRACE_INFO but
no tracepoints, and displays misleading errors.
This adds a check for both in perf-record, and won't record TRACE_INFO
unless both are true. This at least allows perf report -D to dump raw
events, and avoids triggering a misleading error condition in perf
trace. It doesn't actually enable the non-tracepoint raw events to be
displayed in perf trace, since perf trace currently only deals with
tracepoint events.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272865861.7932.16.camel@tropicana>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Into two functions, one that actually reads the build_id for the dso if
it wasn't already read, and another taht will inject the event if the
build_id is available.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this I was able to actually test Tom Zanussi's two previous patches
in my usual perf testing ways, i.e. without any tracepoints activated.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.
What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit. Doing
that in perf-record itself, however, is off-limits.
This patch introduces perf-inject, which does the same job while
leaving perf-record untouched. Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:
perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -
perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.
Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It doesn't really make sense to record the build ids at the end of a
live mode session - live mode samples need that information during the
trace rather than at the end.
Leave event__synthesize_build_id() in place, however; we'll still be
using that to synthesize build ids in a more timely fashion in a
future patch.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1272696080-16435-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to refactor code to be explicitely shared by the kernel and at
least the tools/ userspace programs, so, till we do that, copy the bare
minimum bitmap/bitops code needed by tools/perf.
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit e9e94e3bd8
"perf trace: Ignore "overwrite" field if present in
/events/header_page" makes perf trace launching spurious warnings
about unexpected tokens read:
Warning: Error: expected type 6 but read 4
This change tries to handle the overcommit field in the header_page
file whenever this field is present or not.
The problem is that if this field is not present, we try to find it
and give up in the middle of the line when we realize we are actually
dealing with another field, which is the "data" one. And this failure
abandons the file pointer in the middle of the "data" description
line:
field: u64 timestamp; offset:0; size:8; signed:0;
field: local_t commit; offset:8; size:8; signed:1;
field: char data; offset:16; size:4080; signed:1;
^^^
Here
What happens next is that we want to read this line to parse the data
field, but we fail because the pointer is not in the beginning of the
line.
We could probably fix that by rewinding the pointer. But in fact we
don't care much about these headers that only concern the ftrace
ring-buffer. We don't use them from perf.
Just skip this part of perf.data, but don't remove it from recording
to stay compatible with olders perf.data
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
-f, -c 1, -R are now useless for trace events recording, moreover
-M is useless and event hurts.
Remove them from the documentation examples and from record scripts.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
First an example with the first internal test:
[acme@doppio linux-2.6-tip]$ perf test
1: vmlinux symtab matches kallsyms: Ok
So it run just one test, that is "vmlinux symtab matches kallsyms", and it was
successful.
If we run it in verbose mode, we'll see details about errors and extra warnings
for non-fatal problems:
[acme@doppio linux-2.6-tip]$ perf test -v
1: vmlinux symtab matches kallsyms:
--- start ---
Looking at the vmlinux_path (5 entries long)
No build_id in vmlinux, ignoring it
No build_id in /boot/vmlinux, ignoring it
No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it
Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols
Maps only in vmlinux:
ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text
ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2
Maps in vmlinux with a different name in kallsyms:
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as:
*ffffffffff600100-ffffffffff60012f 0 [kernel].2
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8
Maps only in kallsyms:
ffffffffff600130-ffffffffff6003ff 0 [kernel].4
---- end ----
vmlinux symtab matches kallsyms: Ok
[acme@doppio linux-2.6-tip]$
In the above case we only know the name of the non contiguous kernel ranges in
the address space when reading the symbol information from the ELF symtab in
vmlinux.
The /proc/kallsyms file lack this, we only notice they are separate because
there are modules after the kernel and after that more kernel functions, so we
need to have a module rbtree backed by the module .ko path to get symtabs in
the vmlinux case.
The tool uses it to match by address to emit appropriate warning, but don't
considers this fatal.
The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left
these cases just as extra info in verbose mode.
The end of the sections also aren't in kallsyms, so we the symbols layer does
another pass and sets the end addresses as the next map start minus one, which
sometimes pads, causing harmless mismatches.
But at least the symbols match, tested it by copying /proc/kallsyms to
/tmp/kallsyms and doing changes to see if they were detected.
This first test also should serve as a first stab at documenting the
symbol library by providing a self contained example that exercises it
together with comments about what is being done.
More tests to check if actions done on a monitored app, like doing mmaps, etc,
makes the kernel generate the expected events should be added next.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Created when writing the first 'perf test' regression testing routine.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that "make -C tools/perf O=/tmp/some/path" works again.
Problem introduced in:
cd932c5 "perf: Move arch specific code into separate arch director"
Cc: Ian Munsie <imunsie@au.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now those methods don't operate on a global list of dsos, but on lists
of machines, so make this clear by renaming the functions.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions operated on members now grouped in 'struct machine', so
move those methods to this new class.
The changes made to 'perf probe' shows that using this abstraction
inserting probes on guests almost got supported for free.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't blindly assume that the size of the buffer is enough, use
snprintf.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct kernel_info and kerninfo__ are too vague, what they really
describe are machines, virtual ones or hosts.
There are more changes to introduce helpers to shorten function calls
and to make more clear what is really being done, but I left that for
subsequent patches.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The headers required for DWARF support are provided by the libdw-dev
package in Debian-based distros. This patch corrects the elfutils-dev
package name to libdw-dev in the Makefile error message when libdw.h is
not found.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1272292023-9869-1-git-send-email-stefanha@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --max-probes option to change the maximum limit of
findable probe points per event, since inlined function can be
expanded into thousands of probe points. Default value is 128.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195640.24664.62984.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to exit callback soon after finding too many probe points.
Don't try to continue searching because it already failed.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195632.24664.42598.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix perf probe to use symtab only if there is no debuginfo, because debuginfo
has more information than symtab.
If we can't find a function in debuginfo, we never find it in symtab.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100421195624.24664.46214.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If dso->node member is not initialized, it causes a segmentation fault when
adding to other lists.
It should be initilized in dso__new().
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: : <20100421195616.24664.89980.stgit@localhost6.localdomain6>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
asciidoc does not allow the "===" to be longer than the line
above it.
Also fix a couple types and formatting errors.
Signed-off-by: William Cohen <wcohen@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4BD204C5.9000504@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
To ensure sample events time reordering is reliable, add a -d option
to perf trace to check that automatically.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Use the new generic sample events reordering from perf timechart,
this drops the ad hoc sample reordering it was using before.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Use the new generic sample events reordering from perf trace.
Before that, the displayed traces were ordered as they were
in the input as recorded by perf record (not time ordered).
This makes eventually perf trace displaying the events as beeing
time ordered.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Use the new generic sample events reordering from perf kmem,
this drops the need of multiplexing the buffers on record time,
improving the scalability of perf kmem.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Use the new generic sample events reordering from perf sched,
this drops the need of multiplexing the buffers on record time,
improving the scalability of perf sched.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
The sample events recorded by perf record are not time ordered
because we have one buffer per cpu for each event (even demultiplexed
per task/per cpu for task bound events). But when we read trace events
we want them to be ordered by time because many state machines are
involved.
There are currently two ways perf tools deal with that:
- use -M to multiplex every buffers (perf sched, perf kmem)
But this creates a lot of contention in SMP machines on
record time.
- use a post-processing time reordering (perf timechart, perf lock)
The reordering used by timechart is simple but doesn't scale well
with huge flow of events, in terms of performance and memory use
(unusable with perf lock for example).
Perf lock has its own samples reordering that flushes its memory
use in a regular basis and that uses a sorting based on the
previous event queued (a new event to be queued is close to the
previous one most of the time).
This patch proposes to export perf lock's samples reordering facility
to the session layer that reads the events. So if a tool wants to
get ordered sample events, it needs to set its
struct perf_event_ops::ordered_samples to true and that's it.
This prepares tracing based perf tools to get rid of the need to
use buffers multiplexing (-M) or to implement their own
reordering.
Also lower the flush period to 2 as it's sufficient already.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
The parse_single_tracepoint_event() was setting some attributes
before it validated the event was indeed a tracepoint event. This
caused problems with other initialization routines like in the
builtin-top.c module whereby sample_period is not set if not 0.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4bcf232b.698fd80a.6fbe.ffffb737@mx.google.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Previous state machine of perf lock was really broken.
This patch improves it a little.
This patch prepares the list of state machine that represents
lock sequences for each threads.
These state machines can be one of these sequences:
1) acquire -> acquired -> release
2) acquire -> contended -> acquired -> release
3) acquire (w/ try) -> release
4) acquire (w/ read) -> release
The case of 4) is a little special.
Double acquire of read lock is allowed, so the state machine
counts read lock number, and permits double acquire and release.
But, things are not so simple. Something in my model is still wrong.
I counted the number of lock instances with bad sequence,
and ratio is like this (case of tracing whoami): bad:233, total:2279
version 2:
* threads are now identified with tid, not pid
* prepared SEQ_STATE_READ_ACQUIRED for read lock.
* bunch of struct lock_seq_stat is now linked list
* debug information enhanced (this have to be removed someday)
e.g.
| === output for debug===
|
| bad:233, total:2279
| bad rate:0.000000
| histogram of events caused bad sequence
| acquire: 165
| acquired: 0
| contended: 0
| release: 68
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1271852634-9351-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[rename SEQ_STATE_UNINITED to SEQ_STATE_UNINITIALIZED]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This adds mappings from the register numbers from DWARF to the
register names used in the PowerPC Regs and Stack Access API. This
allows perf probe to be used to record variable contents on PowerPC.
This requires the functionality represented by the config symbol
HAVE_REGS_AND_STACK_ACCESS_API in order to function, although it will
compile without it. That functionality is added for PowerPC in commit
359e4284 ("powerpc: Add kprobe-based event tracer").
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The perf userspace tool included some architecture specific code to map
registers from the DWARF register number into the names used by the regs
and stack access API.
This moves the architecture specific code out into a separate
arch/x86 directory along with the infrastructure required to use it.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we run into dry run mode, we want to make
write_kprobe_trace_event to succeed on writing the event. Let's
initialize it to 0.
Fixes the following build error:
util/probe-event.c:1266: attention : «ret» may be used uninitialized in this function
util/probe-event.c:1266: note: «ret» was declared here
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1271808065-25290-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Trace events are mostly used for tracing and then require not to
be lost when possible. As opposite to hardware events that really
require to trigger after a given sample period, trace events mostly
need to trigger everytime.
It is a frustrating experience to trace with perf and realize we
lost a lot of events because we forgot the "-c 1" option.
Then default sample_period to 1 for trace events but let the user
override it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Trace events are mostly used for tracing rather than simple
counting. Don't bother anymore with adding -R when using them,
just record raw samples of trace events every time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Force the overwriting mode by default if append mode is not explicit.
Adding -f every time one uses perf on a daily basis quickly becomes a
burden.
Keep the -f among the options though to avoid breaking some random
users scripts.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Checking if a tracing field is an array with a dynamic length
requires to check the field type and seek the "__data_loc"
string that prepends the actual type, as can be found in a trace
event format file:
field:__data_loc char[] name; offset:16; size:4; signed:1;
But we actually use strcmp() to check if the field type fully
matches "__data_loc", which may fail as we trip over the rest of
the type.
To fix this, use strncmp to only check if it starts with
"__data_loc".
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1271282283-23721-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Function entry line should be shown as probe-able line,
because each function has declared line attribute.
LKML-Reference: <20100414224007.14630.96915.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
DW_OP_plus_uconst can be used for DW_AT_data_member_location.
This patch adds DW_OP_plus_uconst support when getting
structure member offset.
Commiter note:
Fixed up the size_t format specifier in one case:
cc1: warnings being treated as errors
util/probe-finder.c: In function ‘die_get_data_member_location’:
util/probe-finder.c:270: error: format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
make: *** [/home/acme/git/build/perf/util/probe-finder.o] Error 1
LKML-Reference: <20100414223958.14630.5230.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Line range should reject the range if the number of lines is 0
(e.g. "sched.c:1024+0"), and it should show the lines include
the end of line number (e.g. "sched.c:1024-2048" should show
2048th line).
LKML-Reference: <20100414223950.14630.42263.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since line_finder.lno_s/e are signed int but line_range.start/end
are unsigned int, it is possible to be overflow when converting
line_range->start/end to line_finder->lno_s/e.
This changes line_range.start/end and line_list.line to signed int
and adds overflow checks when setting line_finder.lno_s/e.
LKML-Reference: <20100414223942.14630.72730.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix mis-estimation size for making a short filename.
Since the buffer size is 32 bytes and there are '@' prefix and
'\0' termination, maximum shorten filename length should be
30. This means, before searching '/', it should be 31 bytes.
LKML-Reference: <20100414223935.14630.11954.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using debugfs_path, use debugfs_find_mountpoint()
to find actual debugfs path.
LKML-Reference: <20100414223928.14630.38326.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove all xstr*dup() calls from util/probe-{event,finder}.c since
it may cause 'sudden death' in utility functions and it makes
reusing it from other code difficult.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171756.3790.89607.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove all xzalloc() calls from util/probe-{event,finder}.c since
it may cause 'sudden death' in utility functions and it makes
reusing it from other code difficult.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171749.3790.33303.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove die() and DIE_IF() code from util/probe-event.c since
these 'sudden death' in utility functions make reusing it from
other code (especially tui/gui) difficult.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171742.3790.33650.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove die() and DIE_IF() code from util/probe-finder.c since
these 'sudden death' in utility functions make reusing it from
other code (especially tui/gui) difficult.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171735.3790.88853.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building kernel without CONFIG_FRAME_POINTER, gcc uses
CFA (canonical frame address) for frame base. With this patch,
perf probe just gets CFI (call frame information) from debuginfo
and search corresponding CFA from the CFI. IOW, this allows
perf probe works correctly on the kernel without CONFIG_FRAME_POINTER.
<Before>
./perf probe -fn sched_slice:12 lw.weight
Fatal: DW_OP 156 is not supported.
(^^^ DW_OP_call_frame_cfa)
<After>
./perf probe -fn sched_slice:12 lw.weight
Add new event:
probe:sched_slice (on sched_slice:12 with weight=lw.weight)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171728.3790.98217.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic type casting for arguments to perf probe. This allows
users to specify the actual type of arguments. Of course, if
user sets invalid types, kprobe-tracer rejects that.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171722.3790.50372.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Query the basic type information (byte-size and signed-flag) from
debuginfo and pass that to kprobe-tracer. This is especially useful
for tracing the members of data structure, because each member has
different byte-size on the memory.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171715.3790.23730.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set the last field name to the argument name when the argument
is refering a data-structure member.
e.g.
./perf probe --add 'vfs_read file->f_mode'
Add new event:
probe:vfs_read (on vfs_read with f_mode=file->f_mode)
This probe records file->f_mode, but the argument name becomes "f_mode".
This enables perf-trace command to parse trace event format correctly.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171700.3790.72961.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set given names to event arguments. The syntax is same as kprobe-tracer,
you can add 'NAME=' right before each argument.
e.g.
./perf probe vfs_read foo=file
then, 'foo' is set to the argument name as below.
./perf probe -l
probe:vfs_read (on vfs_read@linux-2.6-tip/fs/read_write.c with foo)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171653.3790.74624.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct sort_entry has a callback named snprintf that turns an
entry into a string result.
But there are glibc versions that implement snprintf through a
macro. The following expression is then going to get the snprintf
call preprocessed:
ent->snprintf(...)
to finally end up in a build error:
util/hist.c: Dans la fonction «hist_entry__snprintf» :
util/hist.c:539: erreur: «struct sort_entry» has no member named «__builtin___snprintf_chk»
To fix this, prepend struct sort_entry callbacks with an "se_"
prefix.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, live mode is invoked by explicitly invoking the
record and report sides and connecting them with a pipe e.g.
$ perf trace record rwtop -o - | perf trace report rwtop 5 -i -
In terms of usability, it's not that bad, but it does require
the user to type and remember more than necessary.
This patch allows the user to accomplish the same thing without
specifying the separate record/report steps or the pipe. So the
same command as above can be accomplished more simply as:
$ perf trace rwtop 5
Notice that the '-i -' and '-o -' aren't required in this case -
they're added internally, and that any extra arguments are
passed along to the report script (but not to the record
script).
The overall effect is that any of the scripts listed in 'perf
trace -l' can now be used directly in live mode, with the
expected arguments, by simply specifying the script and args to
'perf trace'.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-12-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It should be possible to run any perf trace script in 'live
mode'. This requires being able to pass in e.g. '-i -' or other
args, which the current shell scripts aren't equipped to handle.
In a few cases, there are required or optional args that also
need special handling. This patch makes changes the current set
of shell scripts as necessary.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-11-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A couple of scripts, one in Python and the other in Perl, that
demonstrate 'live mode' tracing. For each, the output of the
perf event stream is fed continuously to the script, which
continuously aggregates the data and reports the current results
every 3 seconds, or at the optionally specified interval. After
the current results are displayed, the aggregations are cleared
and the cycle begins anew.
To run the scripts, simply pipe the output of the 'perf trace
record' step as input to the corresponding 'perf trace report'
step, using '-' as the filename to -o and -i:
$ perf trace record sctop -o - | perf trace report sctop -i -
Also adds clear_term() utility functions to the Util.pm and
Util.py utility modules, for use by any script to clear the
screen.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-10-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the build_id perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-9-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the tracing_data perf header code and replaces it with
a synthesized event and processing function that accomplishes
the same thing, used when reading/writing perf data to/from a
pipe.
The tracing data is pretty large, and this patch doesn't attempt
to break it down into component events. The tracing_data event
itself doesn't actually contain the tracing data, rather it
arranges for the event processing code to skip over it after
it's read, using the skip return value added to the event
processing loop in a previous patch.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the event type perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-7-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the attr perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Making the attrs into events allows them to be streamed over a
pipe along with the rest of the header data (in later patches).
It also paves the way to allowing events to be added and removed
from perf sessions dynamically.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds special treatment for stdin - if the user specifies '-i -'
to perf trace, the intent is that the event stream be read from
stdin rather than from a disk file.
The actual handling of the '-' filename is done by the session;
this just adds a signal handler to stop reporting, and turns off
interference by the pager.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds special treatment for stdin - if the user specifies '-i -'
to perf report, the intent is that the event stream be written
to stdin rather than from a disk file.
The actual handling of the '-' filename is done by the session;
this just adds a signal handler to stop reporting, and turns off
interference by the pager.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds special treatment for stdout - if the user specifies '-o -'
to perf record, the intent is that the event stream be written
to stdout rather than to a disk file.
Also, redirect stdout of forked child to stderr - in pipe mode,
stdout of the forked child interferes with the stdout perf
stream, so redirect it to stderr where it can still be seen but
won't be mixed in with the perf output.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch makes several changes to allow the perf event stream
to be sent and received over a pipe:
- adds pipe-specific versions of the header read/write code
- adds pipe-specific version of the event processing code
- adds a range of event types to be used for header or other
pseudo events, above the range used by the kernel
- checks the return value of event handlers, which they can use
to skip over large events during event processing rather than actually
reading them into event objects.
- unifies the multiple do_read() functions and updates its
users.
Note that none of these changes affect the existing perf data
file format or processing - this code only comes into play if
perf output is sent to stdout (or is read from stdin).
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Parsing an option from the command line with OPT_BOOLEAN on a
bool data type would not work on a big-endian machine due to the
manner in which the boolean was being cast into an int and
incremented. For example, running 'perf probe --list' on a
PowerPC machine would fail to properly set the list_events bool
and would therefore print out the usage information and
terminate.
This patch makes OPT_BOOLEAN work as expected with a bool
datatype. For cases where the original OPT_BOOLEAN was
intentionally being used to increment an int each time it was
passed in on the command line, this patch introduces OPT_INCR
with the old behaviour of OPT_BOOLEAN (the verbose variable is
currently the only such example of this).
I have reviewed every use of OPT_BOOLEAN to verify that a true
C99 bool was passed. Where integers were used, I verified that
they were only being used for boolean logic and changed them to
bools to ensure that they would not be mistakenly used as ints.
The major exception was the verbose variable which now uses
OPT_INCR instead of OPT_BOOLEAN.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport
Cc: Git development list <git@vger.kernel.org>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: WANG Cong <amwang@redhat.com>
Cc: Thiago Farina <tfransosi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to create the $O/scripts/perl/Perf-Trace-Util/ directory too.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is not used in perf where we have the LOST events.
Without this patch we get:
[root@doppio ~]# perf lock report | head -3
Warning: Error: expected 'data' but read 'overwrite'
So, to make the same perf command work with kernels with and without
this field, introduce variants for the parsing routines to not warn the
user in such case.
Discussed-with: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct typos in perf bench & perf sched help text.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20100331113100.cc898487.randy.dunlap@oracle.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Fix spello in user message.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Cc: Paul Mackerra <paulus@samba.org>s
LKML-Reference: <20100331113056.2c7df509.randy.dunlap@oracle.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Esc + Enter should be enough warning to avoid accidentaly exiting from
the browser.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 5a0e3ad ("include cleanup: Update gfp.h and slab.h
includes to prepare for breaking implicit slab.h inclusion
from percpu.h") added a '#include <linux/slab.h>' to
tools/perf/builtin-kmem.h because: that tool has lines like
this:
if (!strcmp(event->name, "kmalloc") ||
!strcmp(event->name, "kmem_cache_alloc")) {
process_alloc_event(data, event, cpu, timestamp, thread, 0);
return;
}
So, using the script regex:
>>> import re
>>> s = re.compile(r'^(|.*[^a-zA-Z0-9_])_*(slab_is_available|kmem_cache_|k[mzc]alloc|krealloc|kz?free|ksize|__getname|putname)')
>>> l = ' !strcmp(event->name, "kmem_cache_alloc")) {'
>>> s.search(l)
<_sre.SRE_Match object at 0xb77b1ad0>
>>>
Remove that file that is not available in the tools/perf include
path and thus builtin-kmem.c couldn't be compiled.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1270561053-14308-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently util/string.c includes headers in this order: string.h, util.h
But this causes a build error because __USE_GNU definition
is needed for strndup() definition:
% make -j
touch .perf.dev.null
CC util/string.o
cc1: warnings being treated as errors
util/string.c: In function ‘argv_split’:
util/string.c:171: error: implicit declaration of function ‘strndup’
util/string.c:171: error: incompatible implicit declaration of built-in function ‘strndup’
So this patch swaps the headers inclusion order.
util.h defines _GNU_SOURCE, and /usr/include/features.h defines
__USE_GNU as 1 if _GNU_SOURCE is defined.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1270368798-27232-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Now one can press the right arrow key and in addition to being able to
filter by DSO, filter out by thread too, or a combination of both
filters.
With this one can start collecting events for the whole system, then
focus on a subset of the collected data quickly.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clicking on -> will bring as one of the popup menu options a "Zoom into
CURRENT DSO", i.e. CURRENT will be replaced by the name of the DSO in
the current line.
Choosing this option will filter out all samples that didn't took place
in a symbol in this DSO.
After that the option reverts to "Zoom out of CURRENT DSO", to allow
going back to the more compreensive view, not filtered by DSO.
Future similar operations will include zooming into a particular thread,
COMM, CPU, "last minute", "last N usecs", etc.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can use it in the 'perf annotate' command line, otherwise
it'll use the default and not the specified -i filename passed to 'perf
report'.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
