Commit Graph

6803 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
2c52b1efd6 Third set of IIO new device support, features and cleanup for the 4.10 cycle.
Includes Peter Rosin's interesting drivers for a comparator. First complex
 use we have had with an analog front end made from discrete components.
 
 Brian Masney's work on moving the tsl2583 driver out of staging also
 feature extensively!
 
 New Drivers
 * DAC based on a digital potentiometer
   - New driver for the use of a dpot as a DAC. Includes bindings and Axentia
   entry in vendor prefixes.
 * Envelope detector baed on DAC and a comparator including device tree
   bindings.
 
 Staging Graduation
 * tsl2583.
 
 Core new features
 - Core provision for _available attributes.   This one had been stalled for
   a long time until Peter picked it up and ran with it!
 - In kernel interface helpers to retrieve available info from channels.
 
 Driver new features
 * mcp4531
   - Add range of available raw values (used for the dpot dac driver).
 
 Driver cleanups and fixes for issues introduced
 * ad7766
   - Testing the wrong variable following devm_regulator_bulk_get introduced
   with the driver earlier in this cycle.
 * ad9832
   - Fix a wrong ordering in the probe introduced in the previous set of
     patches.  A use before allocation bug.
 * cros_ec_sensors
   - Testing for an error in a u8 will never work.
 * mpu3050
   - Remove duplicate initializer for the module owner.
   - Add missing i2c dependency.
   - Inform the i2c mux core how it is used - step one in implifying device
   tree bindings.
 * st-sensors
   - Get rid of large number of uninformative defines in favour of putting the
   constants where they are relevant. It is clear what they are from where
   they are used.
 * tsl2583
   - Fix unused function warning when CONFIG_PM disabled and remove the
   ifdefs in favour of __maybe_unused.
   - Refactor taos_chip_on  to only read relevant registers.
   - Make sure calibscale and integration time are being set.
   - Verify chip is in ready to be used before calibration.
   - Remove some repeated checks for chip status (it's protected by a mutex
   so can't change until it's released)
   - Change current state storage from a tristate enum to a boolean seeing as
   only two values are actually used now.
   - Drop a redundant write to the control regiser in taos_probe (it's a noop)
   - Drop the FSF mailing address.
   - Clean up logging to not use hard coded function names (use __func__
   instead).
   - Cleanup up variable and function name prefixes.
   - Alignment of #define fixes.
   - Fix comparison between signed and unsigned integer warnings.
   - Add some newlines in favour of readability.
   - Combine the two sysfs ABI docs that somehow ended up in different places.
   - Fix multiline comment syntax.
   - Move a code block to inside an else statement as it makes more sense there.
   - Change tsl2583_als_calibrate to return 0 rather than a value nothing
   reads.
   - Drop some pointless brackets
   - Don't assume 32bit unsigned int.
   - Change to a per device instance lux table.
   - Add missing tsl2583 to the list of supported devices in the intro comments.
   - Improve commment on clearing of interrupts.
   - Drop some uninformative comments.
   - Drop a memset call that doesn't do anything useful any more.
   - Don't initialize some return variables that are always set.
   - Add Brian Masney as a module author after all these changes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJYKMYhERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIiNMP
 /00ZTTfPR/I5VtriTchGTgXN6lDTnypFk9Z4niynK3EIdF6Mw5XphQjtUzg7sJl4
 U7yH89lzt0PxAJHylW5x0YOwrr6fyau+rNA2Kj26psaQpf5Yva0UDRexsomTZaad
 P005cf0yc4fuG/7KvjeONeLeaRXf9Qfs20r8htECLFhIGSE0qsGtfzUMn6tdbyn/
 r/hxHR7oE2YThuFytX2sNJEJVmCDz+tTOz7kJv5L0e6Cg6cvMFizYUsoFYcZYGOQ
 DNicdRfW5FOidBMCqXzYLDBn+oY+a35g90hFV3CvYsfEm+X6BzTgr3FI3PHmtXHT
 RRAmRdgxg2z/rqp475f5EamRtZxEg0uktbqcs9bH8Bx7IDe8KtoNKLdPdxIT3T1D
 ZYb0RkpPmfnBq3bDGh7DJVWl+Ht9Fj0jaKRNyWgiyopA9c6zN4MKRA+HNSxKRvD7
 Qizw0QIPbtEGkw6WbQrrOSSwzNY/dq51vrT0eBmMaGpjmdDpRKrK53/k7uwk3/Wv
 hjGWD5kdLRCAHL+EQKFssN/RgLS5PRhXsJQFeIYbH8VJFlEZ28j09gXJnjcpDucK
 CXv37q8CX6wJ2NB+i+skOvKpxArgv+Mr4oE9LNYZie65EUyN28/Ii1n9vYmTPTlG
 KXGKPynaR0sfrl+ir6+FCtuFXJnYC5WUqJH/yMRjA2z8
 =mPkb
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.10c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of IIO new device support, features and cleanup for the 4.10 cycle.

Includes Peter Rosin's interesting drivers for a comparator. First complex
use we have had with an analog front end made from discrete components.

Brian Masney's work on moving the tsl2583 driver out of staging also
feature extensively!

New Drivers
* DAC based on a digital potentiometer
  - New driver for the use of a dpot as a DAC. Includes bindings and Axentia
  entry in vendor prefixes.
* Envelope detector baed on DAC and a comparator including device tree
  bindings.

Staging Graduation
* tsl2583.

Core new features
- Core provision for _available attributes.   This one had been stalled for
  a long time until Peter picked it up and ran with it!
- In kernel interface helpers to retrieve available info from channels.

Driver new features
* mcp4531
  - Add range of available raw values (used for the dpot dac driver).

Driver cleanups and fixes for issues introduced
* ad7766
  - Testing the wrong variable following devm_regulator_bulk_get introduced
  with the driver earlier in this cycle.
* ad9832
  - Fix a wrong ordering in the probe introduced in the previous set of
    patches.  A use before allocation bug.
* cros_ec_sensors
  - Testing for an error in a u8 will never work.
* mpu3050
  - Remove duplicate initializer for the module owner.
  - Add missing i2c dependency.
  - Inform the i2c mux core how it is used - step one in implifying device
  tree bindings.
* st-sensors
  - Get rid of large number of uninformative defines in favour of putting the
  constants where they are relevant. It is clear what they are from where
  they are used.
* tsl2583
  - Fix unused function warning when CONFIG_PM disabled and remove the
  ifdefs in favour of __maybe_unused.
  - Refactor taos_chip_on  to only read relevant registers.
  - Make sure calibscale and integration time are being set.
  - Verify chip is in ready to be used before calibration.
  - Remove some repeated checks for chip status (it's protected by a mutex
  so can't change until it's released)
  - Change current state storage from a tristate enum to a boolean seeing as
  only two values are actually used now.
  - Drop a redundant write to the control regiser in taos_probe (it's a noop)
  - Drop the FSF mailing address.
  - Clean up logging to not use hard coded function names (use __func__
  instead).
  - Cleanup up variable and function name prefixes.
  - Alignment of #define fixes.
  - Fix comparison between signed and unsigned integer warnings.
  - Add some newlines in favour of readability.
  - Combine the two sysfs ABI docs that somehow ended up in different places.
  - Fix multiline comment syntax.
  - Move a code block to inside an else statement as it makes more sense there.
  - Change tsl2583_als_calibrate to return 0 rather than a value nothing
  reads.
  - Drop some pointless brackets
  - Don't assume 32bit unsigned int.
  - Change to a per device instance lux table.
  - Add missing tsl2583 to the list of supported devices in the intro comments.
  - Improve commment on clearing of interrupts.
  - Drop some uninformative comments.
  - Drop a memset call that doesn't do anything useful any more.
  - Don't initialize some return variables that are always set.
  - Add Brian Masney as a module author after all these changes.
2016-11-16 17:20:40 +01:00
Greg Kroah-Hartman
ce0347c2b0 Merge 4.9-rc5 into staging-next
We want the staging/iio fixes in here as well to resolve issues and
merge problems.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14 08:53:56 +01:00
Peter Rosin
b475f80b35 iio: envelope-detector: ADC driver based on a DAC and a comparator
The DAC is used to find the peak level of an alternating voltage input
signal by a binary search using the output of a comparator wired to
an interrupt pin. Like so:
                          _
                         | \
    input +------>-------|+ \
                         |   \
           .-------.     |    }---.
           |       |     |   /    |
           |    dac|-->--|- /     |
           |       |     |_/      |
           |       |              |
           |       |              |
           |    irq|------<-------'
           |       |
           '-------'

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 13:07:17 +00:00
Peter Rosin
e778aa142a dt-bindings: iio: document envelope-detector bindings
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 13:07:16 +00:00
Peter Rosin
7fde1484af iio: dpot-dac: DAC driver based on a digital potentiometer
It is assumed that the dpot is used as a voltage divider between the
current dpot wiper setting and the maximum resistance of the dpot. The
divided voltage is provided by a vref regulator.

                  .------.
   .-----------.  |      |
   | vref      |--'    .---.
   | regulator |--.    |   |
   '-----------'  |    | d |
                  |    | p |
                  |    | o |  wiper
                  |    | t |<---------+
                  |    |   |
                  |    '---'       dac output voltage
                  |      |
                  '------+------------+

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 13:07:15 +00:00
Peter Rosin
ed13134ba8 dt-bindings: iio: document dpot-dac bindings
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 11:40:28 +00:00
Peter Rosin
2704e30014 iio: mcp4531: provide range of available raw values
Example:

$ cat '/sys/bus/iio/devices/iio:device0/out_resistance_raw_available'
[0 1 256]

Meaning: min 0, step 1 and max 256.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13 11:40:26 +00:00
Linus Torvalds
8233008f5d pci-v4.9-fixes-3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYJg7LAAoJEFmIoMA60/r8J3UP/04+KrtlbNWV4UzIadry4NJ4
 w05NUZZQnCc4PfN63Yab9IS6UjDiuK0spe3tzjPub/1uKrjEVZzOTnKZLaJe5hKA
 /eRavTTeBwYfI1/Otw1pMLzbEOe/OMjvMuf96KRla/dlnVG6QTppD81jwW+lYZ51
 I7gRqD+cL6f2X4tw3ORWi0EsqvOvbhSiNBklkQkEXH9epDXFnqiKgpom+Wqhl3TP
 G7ZPX4PAk8eScEfwkAOCP9QSdCFaKlRMMLNXCScKsxRGKkkXUrGQxj17GWYjInAx
 tAbjUwImrAHuVYQMggawXlmRI4+gdbpOYVV7yl2yuHecYFqr2o+9KX7A7hUJatYJ
 37TeWUHZKONiQ31+fYFIUM814H6Yzl76m7ZrexYQ0Dq3roDLZSP9/RtFxO1/ADlJ
 VKlGZ7clvklKPU2GfVCL6GR2mvIxBv8AOZi1YuK0haMXuPJmgkxnoBvM7W4krWhR
 Ynffu5HI7+BWi1syp/tay1fYhWy08TmKTnSZFiIxOQgC3MCjB4uEHa31RB3BxnpV
 tJiPYxikjO6hXwTWJJRULsP9P2fMObX/+fphb5FamHbx0kRr+wSqlmjCJJA2g338
 1cK6TLAJ2Zl6aF2l7FWtr6YYvLBfPAj5PVxpySSS+yYt4Pq41weKKH0XUn7u+OXG
 xLcZcDEUdjqoZnjkEG8X
 =5c2j
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

 - Update MAINTAINERS for Intel VMD driver filename

 - Update Rockchip rk3399 host bridge driver DTS and resets

 - Fix ROM shadow problem that made some video device initialization
   fail

* tag 'pci-v4.9-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: VMD: Update filename to reflect move
  arm64: dts: rockchip: add three new resets for rk3399 PCIe controller
  PCI: rockchip: Add three new resets as required properties
  PCI: Don't attempt to claim shadow copies of ROM
2016-11-11 16:38:26 -08:00
Keith Busch
bc79c9851a PCI: VMD: Update filename to reflect move
Updating MAINTAINERS to reflect the new location of the VMD driver.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-10 16:26:32 -06:00
Greg Kroah-Hartman
7970b9e6a5 Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle
This includes two branch merges for elements that may also go via MFD.
 
 New device support
 * cros_ec
   - new driver to support these Chrome OS contiguous sensors which are behind
     the Chrome OS embedded controller.  Requires a few minor MFD and chrome
     platform changes.  One follow up fix deals with some dependency issues in
     Kconfig.
 * mpu-3050
   - new driver and device tree bindings for this venerable device.
 * st_accel
   - support for the lng2dm an
 
 Driver features
 * ad7192
   - Add DVdd regulator handling
 * ad9832
   - Add DVDD regulator handling
 * at91
   - Suspend and resume support
 * si7020
   - Device tree bindings
 * ti-am335x
   - DMA support - uses dma to accelerate short bursts of read back rather
   than full blown DMA buffer support.  Greatly improved performance.
   Includes an MFD addition to give access to the address needed for DMA.
 * tsl2583
   - Device tree bindings
 
 Cleanups and minor fixes
 * ad7192
   - Fix regulator naming to match datasheet
   - Handle regulator errors correctly (so as to not break deferred probing)
   - Rename reg variable to reflect which regulator it is
 * ad5933
   - Fix regulator naming to match datasheet
   - Handle regulator errors correctly (so as to not break deferred probing)
 * ad7746
   - Fix a missing return value (fallout from previous patch set)
 * ad7780
   - Fix regulator naming to match datasheet
   - Handle regulator errors correctly (so as to not break deferred probing)
 * ad9832
   - Fix regulator naming to match datasheet
   - Handle regulator errors correctly (so as to not break deferred probing)
   - Rename reg regulator to reflect which one it is
 * ad9834
   - Fix regulator naming to match datasheet
   - Handle regulator errors correctly (so as to not break deferred probing)
 * hts221
   - Remove a duplicated include
 * maxim thermocouple
   - Handle a wrong storage side in read function.  Prevent any problems that
   might be introduced by additions to this driver in future.
 * tsl2583 - big set from Brian Masney to drive this towards a staging
   graduation.
   - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps)
   - Improved error handling in various functions
   - Drop redundant power_state custom sysfs attribute.
   - Use IIO_*_ATTR* macros for remaining attributes.
   - Return an error code to userspace on invalid parameters being writen to
     sysfs files.
   - Add locking to various attribute accesses to remove possible races.
   - Add defines for various magic numbers.
   - Use smbus_read_byte_data instead of a write_byte followed by read_byte.
   - Query only relevant registers in probe.
   - Tidy up ordering of code comments.
   - Remove a pointless power off sequence in taos_chip_on.
   - Don't bother shutting down the chip when updating the lux table.
   The table is held entirely in the driver and doesn't effect the chip at all.
   - Drop a redundant i2c call in taos_als_calibrate where the same register
   is read twice in a row.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJYH22HERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIUg4P
 /1GRFGpTbqyzDOX6KZKAdBRsRMn3XPL0XslvbKpupY4T9WFEJbZi01z4P/x+uRIk
 6TtRlhdWBLdzVQ6sLpVAZVXR2/FxGj+nsc2ONgHJXm02/fDBmjI89Ed9WVS1HR73
 D2yLAFhflvE6mDMExvAnUVBh9ClR2SXoGL0N1k+VQM08Rs+F6IzBAg2albiPkct/
 7UQB9apn4VCCaRY02gllvWrUiJV3w8jsSikwDACZsprQGIxKjLiH4evtRfSOI8bg
 Z7UoJYaYNMiQtn6+rFaNUjFQtzlnWcjB92RUy/MqnpXmkuAvw3+CbXYteYnailO1
 eTsIjKpwssKaQh5HHALrxIwP/a/9a+Wyrd8iheygUQvzSNx3gcxXrtNrUk8eI/9W
 N8pBRBbu+2pzSzVLQb+7SR5wJG1zQ5NEXI1gpZuyed94g30Be0vQpeiZRNCUL+J0
 ta28Xa25cREzHrXGXrhfyxNJuriav/8A5PTtnGJSZZ8RhuHZq24TcC8h6KVOWR+3
 BBiehupFcIErbrGcMKuhq01q8A9+Vj/1z6hQaZzfIpXFjEEUvkBo3OMiNtgpkQYM
 XYdaF2bH25t8wx020z4FrmN48nxg2HDTLtKissP/6bInh4kYyGneKhf6QQVnG2IX
 41XLE/fw4QoAnLuTBXD3boydC08uJmVkXeOH2sfaCYwG
 =ptGw
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.10b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle

This includes two branch merges for elements that may also go via MFD.

New device support
* cros_ec
  - new driver to support these Chrome OS contiguous sensors which are behind
    the Chrome OS embedded controller.  Requires a few minor MFD and chrome
    platform changes.  One follow up fix deals with some dependency issues in
    Kconfig.
* mpu-3050
  - new driver and device tree bindings for this venerable device.
* st_accel
  - support for the lng2dm an

Driver features
* ad7192
  - Add DVdd regulator handling
* ad9832
  - Add DVDD regulator handling
* at91
  - Suspend and resume support
* si7020
  - Device tree bindings
* ti-am335x
  - DMA support - uses dma to accelerate short bursts of read back rather
  than full blown DMA buffer support.  Greatly improved performance.
  Includes an MFD addition to give access to the address needed for DMA.
* tsl2583
  - Device tree bindings

Cleanups and minor fixes
* ad7192
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
  - Rename reg variable to reflect which regulator it is
* ad5933
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* ad7746
  - Fix a missing return value (fallout from previous patch set)
* ad7780
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* ad9832
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
  - Rename reg regulator to reflect which one it is
* ad9834
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* hts221
  - Remove a duplicated include
* maxim thermocouple
  - Handle a wrong storage side in read function.  Prevent any problems that
  might be introduced by additions to this driver in future.
* tsl2583 - big set from Brian Masney to drive this towards a staging
  graduation.
  - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps)
  - Improved error handling in various functions
  - Drop redundant power_state custom sysfs attribute.
  - Use IIO_*_ATTR* macros for remaining attributes.
  - Return an error code to userspace on invalid parameters being writen to
    sysfs files.
  - Add locking to various attribute accesses to remove possible races.
  - Add defines for various magic numbers.
  - Use smbus_read_byte_data instead of a write_byte followed by read_byte.
  - Query only relevant registers in probe.
  - Tidy up ordering of code comments.
  - Remove a pointless power off sequence in taos_chip_on.
  - Don't bother shutting down the chip when updating the lux table.
  The table is held entirely in the driver and doesn't effect the chip at all.
  - Drop a redundant i2c call in taos_als_calibrate where the same register
  is read twice in a row.
2016-11-07 09:14:03 +01:00
Linus Torvalds
785bcb40a0 MTD updates for 4.9-rc4:
* MAINTAINERS updates to reflect some new maintainers/submaintainers -- we
    have some great volunteers who've been developing and reviewing already.
    We're going to try a group maintainership model, so eventually you'll
    probably see pull requests from people besides me.
 
  * NAND fixes from Boris:
    """
    Three simple fixes:
 
    - the first one is fixing a non-critical bug in the gpmi driver
    - the second one is fixing a bug in the 'automatic NAND timings
      selection' feature introduced in 4.9-rc1
    - the last one is fixing a false positive uninitialized-var warning
    """
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYHSUHAAoJEFySrpd9RFgtnzYQAKROCvMsD8+2k2kxAQiR4HXk
 HtAVi7Pma3zBxbNYXyr1ThGS+Woiy4Ln4xrFyo2M4WQBjbwxZJmQ6BZi0WJ1Hmo0
 aZ0J+jxZHAqXFMlMqaD40w7khW97oTmQ7elCp7agpunQYo1QkbT/Kq/oO3Jet1GX
 lDA3JIbdpdk0nhS5p61tzlgzr6YaXvKQjbUxbtPgMi/sfEBAlG9AaoQWgYrvy0YD
 8JXV74Mo7tG/gNVhsNqTAnzgOHevaW1h2Oiy87Rn7os2eCVzSR0TkQ7AEMEBF55x
 2PpMhxPvxFn/rwAVyecgtkw8SJODng/ROa7iALoEGJiqSdWjhqpWkqhw4UQiHR2J
 mBHFL5+wzsNGyUCPtSmxP+QDK2pueQale3skZivz7twxrRI5OF4DLHMLqktoeqEL
 QGXZUzR+2guK0GK70UfsBiNkVjNH0AMCO+AedwhC6cc2Gei2qhivfIdwWNIY9otn
 2JMVW+pWYlCCtczatgMb1+7/ZlPH+iLpJZHcs/fAh/MGrSDEcXxP5jOxXo3ZS1sK
 jo8CbyRu/QfwWmnkskWfnmPvfbUpIyDmVddYoDmjDvtsea3s3zxvmUb0JhHY8se7
 594NRqEXThmf7LkbVIAS5260fBTELu6jh+y+Fsnpd73nUnrZTspDEYKX1CbNM2k7
 qpEeyozBpihUF9C6hq7o
 =7VFh
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20161104' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Brian Norris:

 - MAINTAINERS updates to reflect some new maintainers/submaintainers.

   We have some great volunteers who've been developing and reviewing
   already. We're going to try a group maintainership model, so
   eventually you'll probably see pull requests from people besides me.

 - NAND fixes from Boris:
    "Three simple fixes:

      - fix a non-critical bug in the gpmi driver
      - fix a bug in the 'automatic NAND timings selection' feature
        introduced in 4.9-rc1
      - fix a false positive uninitialized-var warning"

* tag 'for-linus-20161104' of git://git.infradead.org/linux-mtd:
  mtd: mtk: avoid warning in mtk_ecc_encode
  mtd: nand: Fix data interface configuration logic
  mtd: nand: gpmi: disable the clocks on errors
  MAINTAINERS: add more people to the MTD maintainer team
  MAINTAINERS: add a maintainer for the SPI NOR subsystem
2016-11-05 10:52:29 -07:00
Linus Torvalds
04659febcb virtio: tests, fixes and cleanups
Just minor tweaks, there's nothing major in this cycle.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYFnb+AAoJECgfDbjSjVRpBD4IAKjmFLG6rcswWwYVSNwxMcEX
 6gxStyojtx9jTdQhjYUeC4KJmPozGn9mxEyHuWHNAqWWP/nASbViXYDwVm9xv/14
 TxuApiOJ9tFB0DYlduGDQbS5D6m3WSk7U2s71pwC0g2YPx1EQc8jHbeT09Jn5qVw
 6A099BILekts/lN6s9ST+6CAHBLTkZGB6iyAb+zAh+KN+VRX3ikpOjebgUjzO1+P
 hLJc+lgfls+cwuhwO5A+Pg1PMrJ455A/gdEVUfMbbj8BAkihueUHPUzkc702Y5h2
 j3AfCLJdCBIR/k3+R9Du0IcK0mXioZtiBPfREGQ+kI0ukauFDhtKgjaOd0bmU4s=
 =ASeM
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "Tests, fixes and cleanups.

  Just minor tweaks, there's nothing major in this cycle"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_ring: mark vring_dma_dev inline
  virtio/vhost: add Jason to list of maintainers
  virtio_blk: Delete an unnecessary initialisation in init_vq()
  virtio_blk: Use kmalloc_array() in init_vq()
  virtio: remove config.c
  virtio: console: Unlock vqs while freeing buffers
  ringtest: poll for new buffers once before updating event index
  ringtest: commonize implementation of poll_avail/poll_used
  ringtest: use link-time optimization
  virtio: update balloon size in balloon "probe"
  virtio_ring: Make interrupt suppression spec compliant
  virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices
2016-11-01 16:56:05 -06:00
Michael S. Tsirkin
678ff27d25 virtio/vhost: add Jason to list of maintainers
Jason's been one of the mst active contributors
to virtio and vhost, it will help to formalize this
and list him as co-maintainer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-31 00:21:48 +02:00
Greg Kroah-Hartman
bdc065666a Merge 4.9-rc3 into staging-next
This resolves a merge issue with
drivers/staging/iio/accel/sca3000_core.c and we want the fixes all in
here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-30 06:38:44 -04:00
Linus Torvalds
2a26d99b25 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Lots of fixes, mostly drivers as is usually the case.

   1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey
      Khoroshilov.

   2) Fix element timeouts in netfilter's nft_dynset, from Anders K.
      Pedersen.

   3) Don't put aead_req crypto struct on the stack in mac80211, from
      Ard Biesheuvel.

   4) Several uninitialized variable warning fixes from Arnd Bergmann.

   5) Fix memory leak in cxgb4, from Colin Ian King.

   6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann.

   7) Several VRF semantic fixes from David Ahern.

   8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper.

   9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet.

  10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev.

  11) Fix stale link state during failover in NCSCI driver, from Gavin
      Shan.

  12) Fix netdev lower adjacency list traversal, from Ido Schimmel.

  13) Propvide proper handle when emitting notifications of filter
      deletes, from Jamal Hadi Salim.

  14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen.

  15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac.

  16) Several routing offload fixes in mlxsw driver, from Jiri Pirko.

  17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy.

  18) Validate chunk len before using it in SCTP, from Marcelo Ricardo
      Leitner.

  19) Revert a netns locking change that causes regressions, from Paul
      Moore.

  20) Add recursion limit to GRO handling, from Sabrina Dubroca.

  21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon.

  22) Avoid accessing stale vxlan/geneve socket in data path, from
      Pravin Shelar"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits)
  geneve: avoid using stale geneve socket.
  vxlan: avoid using stale vxlan socket.
  qede: Fix out-of-bound fastpath memory access
  net: phy: dp83848: add dp83822 PHY support
  enic: fix rq disable
  tipc: fix broadcast link synchronization problem
  ibmvnic: Fix missing brackets in init_sub_crq_irqs
  ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context
  Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context"
  arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold
  net/mlx4_en: Save slave ethtool stats command
  net/mlx4_en: Fix potential deadlock in port statistics flow
  net/mlx4: Fix firmware command timeout during interrupt test
  net/mlx4_core: Do not access comm channel if it has not yet been initialized
  net/mlx4_en: Fix panic during reboot
  net/mlx4_en: Process all completions in RX rings after port goes up
  net/mlx4_en: Resolve dividing by zero in 32-bit system
  net/mlx4_core: Change the default value of enable_qos
  net/mlx4_core: Avoid setting ports to auto when only one port type is supported
  net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec
  ...
2016-10-29 20:33:20 -07:00
Linus Torvalds
2674235fd4 ARM: SoC fixes
We haven't seen a whole lot of fixes for the first two weeks since the merge
 window, but here is the batch that we have at the moment.
 
 Nothing sticks out as particularly bad or scary, it's mostly a handful of
 smaller fixes to several platforms. The Uniphier reset controller changes
 could probably have been delayed to 4.10, but they're not scary and just
 plumbing up driver changes that went in during the merge window.
 
 We're also adding another maintainer to Marvell Berlin platforms, to help
 out when Sebastian is too busy. Yay teamwork!
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYFPA2AAoJEIwa5zzehBx3dlgP/jh5sFyP0siTIKDvHInadQUg
 BXYPtMHQ0t7JZrFbwcNbMDYWiI/W5xtgvbBW3FVMRuwYVbHQnNTYSmg/z458yEPC
 E74Q4ykwvLy8KN3uZXnne7NUjccBcYKnrXNP1IiTsgXYx19iz2j/jXa5O6Js9wHi
 iYsWfPUDhWFautMcN6zxaqlXeC0EuzvqI94bPJzZJE6ZjYbuTUDDk1kopeutJsBa
 DEryAERFiPAXt0YggjLFvFlhoWjUjCMu0S9ilJovx7f3SC93NuLzDdCGOC2tH4oS
 wDPWIMvMdEHnUXF5VYLmzkXovLMloPKTDXYHh5fo8QXQ56RIkjGPgTX4KIm86vJS
 QdZhSE+NY5tYNGr+ErmOWwNail/A4hxT8HWswSrF07ZcN7FOScPGAV+dTfl+/Am/
 RZd6nfSW5X8Yvtr19BZ9TK5HowoDsF+ynQNIlg/fTu+v+KtHGZWVmmSVZrWzJPmf
 6czsfQUDjOVEwg0wcDbHpy3BO69iEFn/45OVDKmrXz1juTehOBviYJ+6L5TsD/n7
 hFVUuCCqBsgIeSIu0xpqoTHrFPK1wd8FoTkUwRBAvOja7D6BmoartvsUvMVeXbLm
 c/2vdoutR6ZDuzoyL3za0FRnngC42AXM+WoPrqSJnqrfX2I8TH0uE6F5gxruxVC9
 ggrXTlCtC6KlC9DhRXh2
 =OGbj
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We haven't seen a whole lot of fixes for the first two weeks since the
  merge window, but here is the batch that we have at the moment.

  Nothing sticks out as particularly bad or scary, it's mostly a handful
  of smaller fixes to several platforms. The Uniphier reset controller
  changes could probably have been delayed to 4.10, but they're not
  scary and just plumbing up driver changes that went in during the
  merge window.

  We're also adding another maintainer to Marvell Berlin platforms, to
  help out when Sebastian is too busy. Yay teamwork!"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  ARM: multi_v7_defconfig: Enable Intel e1000e driver
  MAINTAINERS: add myself as Marvell berlin SoC maintainer
  bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
  ARM: dts: fix the SD card on the Snowball
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
  arm64: dts: marvell: fix clocksource for CP110 master SPI0
  ARM: mvebu: Select corediv clk for all mvebu v7 SoC
2016-10-29 12:07:29 -07:00
Linus Torvalds
2a290036a1 Char/Misc driver fixes for 4.9-rc3
Here are a few small char/misc driver fixes for reported issues.  The
 "biggest" are two binder fixes for reported issues that have been
 shipping in Android phones for a while now, the others are various fixes
 for reported problems.
 
 And there's a MAINTAINERS update for good measure.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlgUz3APHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspNGgAnibp
 VyUJZjQ7CDeIm2lD+Qgz/4a4AJ9xUaO6xmmmkov5QJ7LqscBmiw+jA==
 =1qM6
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc driver fixes for reported issues.

  The "biggest" are two binder fixes for reported issues that have been
  shipping in Android phones for a while now, the others are various
  fixes for reported problems.

  And there's a MAINTAINERS update for good measure.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  extcon: qcom-spmi-misc: Sync the extcon state on interrupt
  hv: do not lose pending heartbeat vmbus packets
  mei: txe: don't clean an unprocessed interrupt cause.
  ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
  ANDROID: binder: Add strong ref checks
2016-10-29 11:19:02 -07:00
Brian Norris
0e2ce9d3fc Three simple fixes:
- the first one is fixing a non-critical bug in the gpmi driver
 - the second one is fixing a bug in the 'automatic NAND timings
   selection' feature introduced in 4.9-rc1
 - the last one is fixing a false positive uninitialized-var warning
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYEwsOAAoJEGXtNgF+CLcAef0P/jEfwHzg9PM+4Nb9z1W42Cug
 llY//idJZJvQd/ui8jLrjpvKIbaYUKquEnADX/ZIAqglAOnKPgT4tkrffHTMq4UC
 d2bND6dG6V3WcBlOgb1+ejOOlKbSEf5sIIvSa/IRLiSjQPBY9IoZqZFEWjzk9B/6
 8x7MwWKkFMnol/xBAI9QXQcausVIyf2KdbzUFLlypo98KelOfFWwn1efK2SgqgmH
 BbLi0Fxo/X+AXOq3ymWvXqQkEh4OJnlA0I3b8v9rofmOFxfZEAkbuBPVj0r8kDLX
 cID6/QcnkHP2rrVmMjD/hllkYRdKXj4EgdbOVWtoYju6EhaTcSAEM2z7wD1syEHt
 Ks82NQo+H/LlyuizgPntll1dM+dVYYLN452kP3fKMGImNJxk+ZPqVSQIlio5mLxi
 6mPb8arx+V6zxtjMmkkkcouctg14ffH2SuGhfdm03jFuc/Kwz6JfB88c029t3Ejh
 1qdlsuPo7rw0SasbBYYrydwafkZ1w1zlBWCoq+xu4ZZXAUXQrZYJCw+gY++mgZBk
 JVpo+dG6wcB3A5vz7ntX/Ri6rtc3VgzXvTUacw9jkjlBGn3cTdNDPZY2l+pqn4RM
 hjGGIUe0W3qQfHtOe1uamdKfLy9LgKe40hcfFDAKMl8eJqcnCPKdiZzoF7scDiEN
 qID3AFfmhPomDloCXOTx
 =75Gw
 -----END PGP SIGNATURE-----

Merge tag 'nand/fixes-for-4.9-rc3' of github.com:linux-nand/linux

From Boris:
"""
Three simple fixes:

- the first one is fixing a non-critical bug in the gpmi driver
- the second one is fixing a bug in the 'automatic NAND timings
  selection' feature introduced in 4.9-rc1
- the last one is fixing a false positive uninitialized-var warning
"""

Acked-by: Marek Vasut <marex@denx.de>
2016-10-28 19:05:25 -07:00
Gabriel Krisman Bertazi
a7d5afe82d MAINTAINERS: Add entry for genwqe driver
Frank and I maintain this

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: haver@linux.vnet.ibm.com
Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com>=
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28 08:28:24 -04:00
Boris Brezillon
30656167bd MAINTAINERS: add more people to the MTD maintainer team
Brian has been maintaining the MTD subsystem alone for several years
now, and maintaining such a subsystem can really be time consuming.

Create a maintainer team formed of the most active MTD contributors
to help Brian with this task, which will hopefully improve the
subsystem reactivity.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-10-27 13:25:05 -07:00
Cyrille Pitchen
e2796541ef MAINTAINERS: add a maintainer for the SPI NOR subsystem
I would like to volunteer as a maintainer for the SPI NOR part of the MTD
subsystem.

Over the last months, a significant number of SPI NOR related patches have
been submitted, some of them have been reviewed, but very few have finally
been merged. Hence, the number of pending SPI NOR related patches continues
to increase over the time.

Through my work on SPI NOR memories from many manufacturers over the last
two years, I've gained a solid understanding of this technology.
I've already helped by reviewing patches from other contributors on the
mailing list, and would like to help getting those patches integrated by
volunteering as a maintainer for this specific area.

Boris Brezillon has already stepped up as a maintainer for the NAND
sub-subsystem in MTD, and the SPI NOR sub-subsystem could be handled in
the same way: I would be reviewing patches touching this area, collecting
them and sending pull requests to Brian Norris.

Also Marek Vasut has volunteered as well as maintainer for the SPI NOR
subsystem.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-10-27 13:12:58 -07:00
Stuart Yoder
d8b97569b6 staging: fsl-mc: update MAINTAINERS
-German has moved on to other things and wished to be
 removed as a maintainer
-cleanup the driver description to use the proper name
 of the driver (i.e. the fsl-mc bus driver) and remove incorrect
 references to Freescale

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 15:15:10 +02:00
Mintz, Yuval
67f0160fe3 MAINTAINERS: Update qlogic networking drivers
Following Cavium's acquisition of qlogic we need to update all the qlogic
drivers maintainer's entries to point to our new e-mail addresses,
as well as update some of the driver's maintainers as those are no longer
working for Cavium.

I would like to thank Sony Chacko and Rajesh Borundia for their support
and development of our various networking drivers.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 23:29:12 -04:00
Rusty Russell
a467a672cf MAINTAINERS: Begin module maintainer transition
Being a Linux kernel maintainer has been my proudest professional
accomplishment, spanning the last 19 years.  But now we have a surfeit
of excellent hackers, and I can hand this over without regret.

I'll still be around as co-maintainer for another cycle, but Jessica
is now the one to convince if you want your patches applied.  She
rocks, and is far more timely than me too!

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jessica Yu <jeyu@redhat.com>
2016-10-26 10:11:30 +10:30
Linus Walleij
3904b28efb iio: gyro: Add driver for the MPU-3050 gyroscope
This adds a new driver for the Invensense MPU-3050 gyroscope.
This driver is based on information from the rough input driver
in drivers/input/misc/mpu3050.c and the scratch misc driver
posted by Nathan Royer in 2011. Some years have passed but this
is finally a fully-fledged driver for this gyroscope. It was
developed and tested on the Qualcomm APQ8060 Dragonboard.

The driver supports both raw and buffered input. It also
supports the internal trigger mechanism by registering a trigger
that can fire in response to the internal sample engine of the
component. In addition to reading out the gyroscope sensor
values, the driver also supports reading the temperature from
the sensor.

The driver currently only supports I2C but the MPU-3050 can
also be used from SPI, so the I2C portions are split in their
own file and we just use regmap to access all registers, so
it will be trivial to plug in SPI support if/when someone has
a system requiring this.

To conserve power, the driver utilizes the runtime PM
framework and will put the sensor in off mode and disable the
regulators when unused, after a timeout of 10 seconds.

The fullscale can be set for the sensor to 250, 500, 1000 or
2000 deg/s. This corresponds to scale values of rougly 0.000122,
0.000275, 0.000512 or 0.001068. By writing such values (or close
to these) into "in_anglevel_scale", the corresponding fullscale
can be chosen. It will default to 2000 deg/s (~35 rad/s).

The gyro component can have DC offsets on all axes. These can be
compensated using the standard sysfs ABI property
"in_anglevel_[xyz]_calibbias". This is in positive/negative
values of the raw values, so a suitable calibration bias can be
determined by userspace by reading the "in_anglevel_[xyz]_raw"
for a few iterations while holding the sensor still, create an
average integer, and writing the negative inverse of that into
"in_anglevel_[xyz]_calibbias". After this the hardware will
automatically subtract the bias, also when using buffered
readings.

Since the MPU-3050 has an outgoing I2C port it needs to act as
an I2C mux. This means that the device is switching I2C traffic
to devices beyond it. On my system this is the only way to reach
the accelerometer. The "sensor fusion" ability of the MPU-3050
to directly talk to the device on the outgoing I2C port is
currently not used by the driver, but it has code to allow I2C
traffic to pass through so that the Linux kernel can reach the
device on the other side with a kernel driver.

Example usage with the native trigger:

$ generic_buffer -a -c10 -n mpu3050
iio device number being used is 0
iio trigger number being used is 0
No channels are enabled, enabling all channels
Enabling: in_anglvel_z_en
Enabling: in_timestamp_en
Enabling: in_anglvel_y_en
Enabling: in_temp_en
Enabling: in_anglvel_x_en
/sys/bus/iio/devices/iio:device0 mpu3050-dev0
29607.142578 -0.117493 0.074768 0.012817 180788797150
29639.285156 -0.117493 0.076904 0.013885 180888982335
29696.427734 -0.116425 0.076904 0.012817 180989178039
29742.857422 -0.117493 0.076904 0.012817 181089377742
29764.285156 -0.116425 0.077972 0.012817 181189574187
29860.714844 -0.115356 0.076904 0.012817 181289772705
29864.285156 -0.117493 0.076904 0.012817 181389971520
29910.714844 -0.115356 0.076904 0.013885 181490170483
29917.857422 -0.116425 0.076904 0.011749 181590369742
29975.000000 -0.116425 0.076904 0.012817 181690567075
Disabling: in_anglvel_z_en
Disabling: in_timestamp_en
Disabling: in_anglvel_y_en
Disabling: in_temp_en
Disabling: in_anglvel_x_en

The first column is the temperature in millidegrees, then the x,y,z
axes in succession followed by the timestamp. Also tested successfully
using the HRTimer trigger.

Cc: Nick Vaccaro <nvaccaro@google.com>
Cc: Ge Gao <ggao@invensense.com>
Cc: Anna Si <asi@invensense.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Crestez Dan Leonard <leonard.crestez@intel.com>
Cc: Daniel Baluta <daniel.baluta@intel.com>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-25 17:24:05 +01:00
Eric Anholt
4a5a7a662a MAINTAINERS: Add the staging vchiq driver as a bcm2835 responsibility.
It's being merged to support firmware communication on the Raspberry
Pi, so we should probably send its patches to linux-rpi-kernel.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-25 09:54:26 +02:00
Greg Kroah-Hartman
c7c88e998a First round of IIO new device support, features and cleanups for the 4.10 cycle.
Fair number of outreachy related patches in here. Some of these may well
 have already been picked up by Greg but git will sort that out for us.
 
 Also some good staging cleanup work from other sources. Thanks Brian and Lars
 in particular for this.
 
 New device support
 * ACCES 104-quad-8
   - New driver for this 8 channel encoder input board. Lots of new ABI with
     this one.
 * AD7766
   - New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and
     AD7767-2 24 bit ADCs.
 * dmard 10
   - New driver for this 3 axis accelerometer.
 * Honeywell ABP pressure sensors.
   - New driver covering 56 parts in this series (too many to list here!)
 * HTS221
   - New driver to support this relative humidiy and temperature device.
 * LMP91000
   - New driver for this potentiostat (form of chemical sensor). Nice example
     of use of the buffered consumer interfaces and the use of a consumer
     provided trigger.
 * MiraMEMS DA311
   - New driver for this 3 axis accelerometer.
 * MiraMEMS DA280
   - New driver for this 3 axis accelerometer. Follow up caught up with
   vendor prefixes for these.
 
 Staging graduations
 * isl29018 light sensor
   - Fixes and cleanups listed below (thanks for your hard work on this Brian!)
 * sca3000
   - Fixes and cleanups listed below.  This was one of the small set of drivers
   that went into staging when IIO was first added.  Turns out it had a few
   bugs and needed to be brought into the modern era!  Not clear if I am
   the only person who actually has one of these still wired to a board.
 
 New features (Core)
  - Add an iio_trigger_validate_own_device helper which relies on the device
    and trigger having the same parent.  Convenient to have this for some
    of the more complex trigger / device interactions. Was hand rolled in
    a few drivers already so good to bring it into the core.
  - Add an iio_read_channel_offset in kernel access helper (similar to
    the existing one for scale).
  - IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros.  These
    lead some rather contrived function naming, but there is no denying they
    do reduced boilerplate.  I'm going to resist their introduction in
    drivers 'unless' they form part of a larger set of cleanups.
  - Counter channel type and index type.
 
 New features (Drivers)
 * hdc100x
   - Triggered buffer support.
 * mcp4725
   - Device tree bindings and support.
   - Voltage reference selection.
 * ti-adc0832
   - Triggered buffer support.
 * ti-adc161s626
   - Add regulator support allowing _scale and _offset values to be established
   and exported.
 
 New features (Tools)
 * iio_generic_buffer
   - -A option to force enable all channels rather than faulting if some are
   already enabled (like -a does).  Followup patches tidied this support up.
 
 Cleanups (Core)
  - Use kmalloc_array in iio_scan_mask_set.
  - Take event_attrs field of iio_info structure constant
  - Staging todo list updates. Most of it was long done.
  - MAINTAINERS had a wrong directory listing.
 
 Cleanups (Drivers)
 * Missing i2c trivial devices entries.
 * ad5592r
   - Fix an endian type related sparse warnings.
 * ad7150
   - Constify the event attribute_group structures.
 * ad7152
   - Add some blank lines to improve readability.
   - Sampling frequency control via chan-info element rather than hand rolled
   attributes.
   - add a new lock to avoid use of mlock for non state change related locking.
 * ad7280
   - Constify atrribute_group structure (second patch covers the event ones)
 * ad7606 (Lars is driving most of the cleanup on this with some additions from
   Eva)
   - Fix improper setting of oversampling pins.  This has been broken a very
   long time in this staging driver, so not going to push this back to stable.
   - Implement oversampling configuration via the chan_info mask element.
   - Remove an unused int_vref_mv field.
   - Remove a reundant name field from ad7606_chip_info.
   - Remove default device configuration from platform_data in favour of
   whatever the power on defaults are.
   - Remove out of band error reporting in the kernel log as not providing
   much information.
   - Fix oversampling ratio by having 1 be the value for no oversampling.
   - Avoid allocating buffer for each data capture.
   - Factor out common code between periodic and one-shot capture.
   - Move set_drvdat into common code.
   - Let the common probe function return int rather than jumping through
   an ERR_PTR.
   - Pass struct device * into common remove to simplify code.
   - Always run trigger handler only once per event (no one can remember why
   it was being possibly done twice).
   - Move over to the GPIO descriptor API to shorten and clarify code.
   - Move the buffer code into the main file as it's not optional and is
   now rather short in this driver.
   - Fix the naming of the supply regulator.
   - Rework regulator handling to handle errors including deferred probing.
   - Tidy up a ptr_err or 0 return.
 * ad7746
   - Sampling frequency control via info_mask element rather than hand rolled
 * ad7758
   - Sampling frequency control via info_mask element rather than hand rolled
   attributes.
 * ad7816
   - Constify the event attribute_group structure.
 * adt7316
   - Constify the event attribute group structures.
 * ak8974
   - Cleanup some sparse warnings about endian types.
 * ak8975
   - Cleanup some sparse warnings about endian types.
 * bmi160
   - Spare endian warning cleanups.
 * isl29018 (towards staging graduation)
   - Remove unusedvariables and defines.
   - Improve consistency of error handling.
   - Signed / unsigned comparison fixes.
   - Use the IIO_DEVICE_ATTR_{RO, RW} macros
   - Fix a race in in_illuminance_scale_available_show.
   - Cleanup exit points of _read_raw
   - Sanity check if in suspended state during a write_raw call as was already
     done for read_raw.
   - Document device tree bidnings.
   - Document infrared supression controls.
   - Add some newlines to improve readability and drop one that shouldn't be
     there.
   - Fix a poorly named functions name.
   - Fix multiline coment syntax.
   - Tidy up a pair or return statements by unifying them.
   - Rename description in Kconfig for consistency with similar drivers.
 * lidar
   - cleanup power management by dropping unnecessary call.
 * ltr501
   - Use the claim_direct_mode helpers. Fix a race condition along the way.
 * max1027
   - Fix a dubious x | !y sparse warning.
   - Use the new iio_trigger_validate_own_device helper.
 * max440000
   - Clean up some sparse warnings about endian types.
 * mcp4725
   - Use the regulator framework to establish the reference voltage rather than
     getting it from platform data.
   - Tidy up a comment typo.
   - Fix a wrong PTR_ERR query (wrong regulator).
 * mma7660
   - Take a mma7660_nscale static.
 * mma8452
   - Use the new iio_trigger_validate_own_device helper.
   - Use claim_direct_mode helpers - fix a race condition along the way.
 * mpl3115
   - Use claim_direct_mode helpers - fix a race condition along the way.
 * ms65611
   - Tidy up regulator error handling and clean out a static warning in the mix.
 * sca3000
   - Avoid a potential unitialized variable if a hardware read returns a value
   that isn't actually supported (mostly warning supression).
   - Fix a use before setting of the indio_dev->buffer pointer. Broken for
   a very long time so not going to rush this into stable.
   - Merge buffer file with core file.  We used to always split these.
   Sometimes it's just not worth the hassle. In this case the device's main
   feature is it's hardware fifos so unlikely anyone would want to run it
   without.
   - Drop the sca3000_register_ring_funcs function as it's a pointless wrapper
   once we have only one file.
   - Fix cleaning of flag + setting of size of scan. Without this you can't
   start the buffer twice and expect sensible (or any) results.  Again,
   broken for a long time so not heading for stable.
   - Drop the custom watershed setting ABI - for now we'll just support one
   value.
   - Move to a hybrid hard / soft buffer design (how we've been doing it
   for similar devices for a while now!)
   - Cleanup some unusued variables.
   - Use a fake channel to support core handling of freefall event registration.
   - Cleanup the register defines.
   - Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value.
   Been broken since first admission of IIO to the staging tree.
   - Add readback of the 3db low pass filter frequency and later writing
     allowing droppign of custom measurement mode attributes as they can
     be represented by the filter choices that is their main characteristic.
   - Drop non standard revision attr and replace with dev_info on probe.
   - Avoid a race in probe.
   - Various formatting fixes.
   - Kernel-docify docs that were very nearly in the write format.
 * tsl2583
   - Constify attribute_group structure.
 * zpa2326
   - Drop a redundant DEBUG ifdef.
 
 Cleanups (Tools)
 * iio_generic_buffer
   - Fix the ? arguement. Previously it sort of worked as you got the help
     message as a result of it not recognising the arguement.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJYDSX+ERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIQSEP
 /2HRMqDXeIh2N0oVLBFK5pEaAZ52tjsEmf1XgfCJ3D1PczS0vzqkFKuG/078BU3v
 e9MTj39sF1EOyGJv4mdfnHygLPvjaTU/A6HoIaP1t9cUgSQ1jzPN0tO8/Hj/ESlU
 U3mNgUNUIa9cnVIfWk2cPJqgKJ/w52vRk00yRnOKZjHZkxbYQq9rPJ7ks12jQSGT
 IBEipiYMnRovc2w4NWbAry5pAXBmttVFKyi5FZ7uIM5EH34+SAY6laXSoZQl8E74
 LKgIwdPUn9yeujyX6ohBFRFloOf/4VYedV6NIUz8k5BzuTeAJcp4DSMLXSWIwZVd
 sdza6el3Tt0MkjIgioTg7N07FvatbQVIsnWnLjLb/zpMjGQPigfTnIi7kYcH3wHx
 NwpTy1MZg5U571LOYXsEhNvIFiQICoV6+8d/PzrO1J+rphuQYreOm0WzjvIqW4q/
 dU2uCAMOHd82gjm9QrKjvrc+4M3oGc3ENE/i5P2YNQhdkdNKp9PMWgL6RO9QXgeQ
 9TrjbDr9OSFLatZg5IswWFa5CHL9AZ6OuvaRyx/8n5cBdY3n8+wMIowRQJlMUdGY
 Aa5ByntMsvhwCu+M1+fDihZyx4suTNvW7+Emqd/8lCb+BRjHoamBb6uGBGx6Txvy
 6TPluNWE+cK5Tjkrn+jDbTzhwdaaSRtO4ECRwxXYAqfn
 =ZRUt
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.10 cycle.

Fair number of outreachy related patches in here. Some of these may well
have already been picked up by Greg but git will sort that out for us.

Also some good staging cleanup work from other sources. Thanks Brian and Lars
in particular for this.

New device support
* ACCES 104-quad-8
  - New driver for this 8 channel encoder input board. Lots of new ABI with
    this one.
* AD7766
  - New driver supporting AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1 and
    AD7767-2 24 bit ADCs.
* dmard 10
  - New driver for this 3 axis accelerometer.
* Honeywell ABP pressure sensors.
  - New driver covering 56 parts in this series (too many to list here!)
* HTS221
  - New driver to support this relative humidiy and temperature device.
* LMP91000
  - New driver for this potentiostat (form of chemical sensor). Nice example
    of use of the buffered consumer interfaces and the use of a consumer
    provided trigger.
* MiraMEMS DA311
  - New driver for this 3 axis accelerometer.
* MiraMEMS DA280
  - New driver for this 3 axis accelerometer. Follow up caught up with
  vendor prefixes for these.

Staging graduations
* isl29018 light sensor
  - Fixes and cleanups listed below (thanks for your hard work on this Brian!)
* sca3000
  - Fixes and cleanups listed below.  This was one of the small set of drivers
  that went into staging when IIO was first added.  Turns out it had a few
  bugs and needed to be brought into the modern era!  Not clear if I am
  the only person who actually has one of these still wired to a board.

New features (Core)
 - Add an iio_trigger_validate_own_device helper which relies on the device
   and trigger having the same parent.  Convenient to have this for some
   of the more complex trigger / device interactions. Was hand rolled in
   a few drivers already so good to bring it into the core.
 - Add an iio_read_channel_offset in kernel access helper (similar to
   the existing one for scale).
 - IIO_ATTR_{RO, WO, RW} and IIO_DEVICE_ATTR_{RO, WO, RW} macros.  These
   lead some rather contrived function naming, but there is no denying they
   do reduced boilerplate.  I'm going to resist their introduction in
   drivers 'unless' they form part of a larger set of cleanups.
 - Counter channel type and index type.

New features (Drivers)
* hdc100x
  - Triggered buffer support.
* mcp4725
  - Device tree bindings and support.
  - Voltage reference selection.
* ti-adc0832
  - Triggered buffer support.
* ti-adc161s626
  - Add regulator support allowing _scale and _offset values to be established
  and exported.

New features (Tools)
* iio_generic_buffer
  - -A option to force enable all channels rather than faulting if some are
  already enabled (like -a does).  Followup patches tidied this support up.

Cleanups (Core)
 - Use kmalloc_array in iio_scan_mask_set.
 - Take event_attrs field of iio_info structure constant
 - Staging todo list updates. Most of it was long done.
 - MAINTAINERS had a wrong directory listing.

Cleanups (Drivers)
* Missing i2c trivial devices entries.
* ad5592r
  - Fix an endian type related sparse warnings.
* ad7150
  - Constify the event attribute_group structures.
* ad7152
  - Add some blank lines to improve readability.
  - Sampling frequency control via chan-info element rather than hand rolled
  attributes.
  - add a new lock to avoid use of mlock for non state change related locking.
* ad7280
  - Constify atrribute_group structure (second patch covers the event ones)
* ad7606 (Lars is driving most of the cleanup on this with some additions from
  Eva)
  - Fix improper setting of oversampling pins.  This has been broken a very
  long time in this staging driver, so not going to push this back to stable.
  - Implement oversampling configuration via the chan_info mask element.
  - Remove an unused int_vref_mv field.
  - Remove a reundant name field from ad7606_chip_info.
  - Remove default device configuration from platform_data in favour of
  whatever the power on defaults are.
  - Remove out of band error reporting in the kernel log as not providing
  much information.
  - Fix oversampling ratio by having 1 be the value for no oversampling.
  - Avoid allocating buffer for each data capture.
  - Factor out common code between periodic and one-shot capture.
  - Move set_drvdat into common code.
  - Let the common probe function return int rather than jumping through
  an ERR_PTR.
  - Pass struct device * into common remove to simplify code.
  - Always run trigger handler only once per event (no one can remember why
  it was being possibly done twice).
  - Move over to the GPIO descriptor API to shorten and clarify code.
  - Move the buffer code into the main file as it's not optional and is
  now rather short in this driver.
  - Fix the naming of the supply regulator.
  - Rework regulator handling to handle errors including deferred probing.
  - Tidy up a ptr_err or 0 return.
* ad7746
  - Sampling frequency control via info_mask element rather than hand rolled
* ad7758
  - Sampling frequency control via info_mask element rather than hand rolled
  attributes.
* ad7816
  - Constify the event attribute_group structure.
* adt7316
  - Constify the event attribute group structures.
* ak8974
  - Cleanup some sparse warnings about endian types.
* ak8975
  - Cleanup some sparse warnings about endian types.
* bmi160
  - Spare endian warning cleanups.
* isl29018 (towards staging graduation)
  - Remove unusedvariables and defines.
  - Improve consistency of error handling.
  - Signed / unsigned comparison fixes.
  - Use the IIO_DEVICE_ATTR_{RO, RW} macros
  - Fix a race in in_illuminance_scale_available_show.
  - Cleanup exit points of _read_raw
  - Sanity check if in suspended state during a write_raw call as was already
    done for read_raw.
  - Document device tree bidnings.
  - Document infrared supression controls.
  - Add some newlines to improve readability and drop one that shouldn't be
    there.
  - Fix a poorly named functions name.
  - Fix multiline coment syntax.
  - Tidy up a pair or return statements by unifying them.
  - Rename description in Kconfig for consistency with similar drivers.
* lidar
  - cleanup power management by dropping unnecessary call.
* ltr501
  - Use the claim_direct_mode helpers. Fix a race condition along the way.
* max1027
  - Fix a dubious x | !y sparse warning.
  - Use the new iio_trigger_validate_own_device helper.
* max440000
  - Clean up some sparse warnings about endian types.
* mcp4725
  - Use the regulator framework to establish the reference voltage rather than
    getting it from platform data.
  - Tidy up a comment typo.
  - Fix a wrong PTR_ERR query (wrong regulator).
* mma7660
  - Take a mma7660_nscale static.
* mma8452
  - Use the new iio_trigger_validate_own_device helper.
  - Use claim_direct_mode helpers - fix a race condition along the way.
* mpl3115
  - Use claim_direct_mode helpers - fix a race condition along the way.
* ms65611
  - Tidy up regulator error handling and clean out a static warning in the mix.
* sca3000
  - Avoid a potential unitialized variable if a hardware read returns a value
  that isn't actually supported (mostly warning supression).
  - Fix a use before setting of the indio_dev->buffer pointer. Broken for
  a very long time so not going to rush this into stable.
  - Merge buffer file with core file.  We used to always split these.
  Sometimes it's just not worth the hassle. In this case the device's main
  feature is it's hardware fifos so unlikely anyone would want to run it
  without.
  - Drop the sca3000_register_ring_funcs function as it's a pointless wrapper
  once we have only one file.
  - Fix cleaning of flag + setting of size of scan. Without this you can't
  start the buffer twice and expect sensible (or any) results.  Again,
  broken for a long time so not heading for stable.
  - Drop the custom watershed setting ABI - for now we'll just support one
  value.
  - Move to a hybrid hard / soft buffer design (how we've been doing it
  for similar devices for a while now!)
  - Cleanup some unusued variables.
  - Use a fake channel to support core handling of freefall event registration.
  - Cleanup the register defines.
  - Fix an off by one error in axis due to IIO_NO_MOD taking up the 0 value.
  Been broken since first admission of IIO to the staging tree.
  - Add readback of the 3db low pass filter frequency and later writing
    allowing droppign of custom measurement mode attributes as they can
    be represented by the filter choices that is their main characteristic.
  - Drop non standard revision attr and replace with dev_info on probe.
  - Avoid a race in probe.
  - Various formatting fixes.
  - Kernel-docify docs that were very nearly in the write format.
* tsl2583
  - Constify attribute_group structure.
* zpa2326
  - Drop a redundant DEBUG ifdef.

Cleanups (Tools)
* iio_generic_buffer
  - Fix the ? arguement. Previously it sort of worked as you got the help
    message as a result of it not recognising the arguement.
2016-10-24 11:34:22 +02:00
Dan Carpenter
d5d4602e04 Staging: iio: fix a MAINTAINERS entry
The "drivers/" part of the path name was missing.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23 19:33:44 +01:00
Linus Torvalds
90e01058bc Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
 "Add Ard Biesheuvel as EFI co-maintainer, plus fix an ARM build bug
  with older toolchains"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm: Fix absolute relocation detection for older toolchains
  MAINTAINERS: Add myself as EFI maintainer
2016-10-22 09:32:10 -07:00
Linus Torvalds
e59f30b417 pci-v4.9-fixes-1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYCjA7AAoJEFmIoMA60/r8uUQP/1rNPSFgW1JeBKBKI0qRKyR+
 uTZHSb4Udy3MKHf7zzEtMuX/xI4kCctgGPv47dqBW4L93kmagA9WxmDSmVtJg+5Z
 usDBXpm3/Wvuj4YiDL6HmKjwWrL0vC+8q2psBtbj6wWRgSooj+NiTmGSiyhtkIba
 OsKy5g73k04owW64i9BJNavbMP8/tGZv47C/3tM3413aYk1ydvVPdYKdyxrCUrVG
 KGfCXn9Seg11/C2dWf6S5nGW3TlqicMzniOIrCsJIj+Ky2teWYeCPiDht5vUHPZa
 T+BsZ/YEjwvK7h1y7/jGAP1utkoNxX4I4wOZ7ts0IExYggrFs9+n+S//PdiqOVdH
 HE0gmt8qM1lHzB82+B8bIfsp76+PHetxbApq7GrWuoroVWAzTThntXWRYCneZjqv
 yNDOjQxAZiKWS1JRCWPyw0x/VpqqUbL2mGeTR521HtP/6l5on1cn9WocTz+VuXe2
 vM3+Hdomijr88zXqNFv58Hws1WnZBJjE4ScakCl0eKb85GYrzaL5qkjM0FMCRUdS
 32+23FrCToVow1B0MA/c6kub6gJmKK8EDlQGkoqsCizWZFUhgAUFLp1Tt2oWQoTC
 P/vOQWh8zvkw4mWlTAnl8XvVWcUHfq14eV+nCT8BzFRB5BEt6Xvag5IUeFggzITu
 r/xpKfEqnfVYgMl0370r
 =pwKi
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "This includes:

   - Fix for a Layerscape driver issue that causes a use-before-set
     crash

   - Maintainer update for the Synopsis prototyping device driver"

* tag 'pci-v4.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: designware-plat: Update author email address
  PCI: layerscape: Fix drvdata usage before assignment
  PCI: designware-plat: Change maintainer to Jose Abreu
2016-10-21 10:48:58 -07:00
Linus Torvalds
0ea67fae9e MMC core:
- Update MAINTAINERS as the mmc tree moved to kernel.org
  - A few fixes for HS400es mode
  - A few other minor fixes
 
 MMC host:
  - sdhci: Fix an issue when dealing with stop commands
  - sdhci-pci: Fix a bus power failure issue
  - sdhci-esdhc-imx: Correct two register accesses
  - sdhci-of-arasan: Fix the 1.8V I/O signal switch behaviour
  - rtsx_usb_sdmmc: Fix runtime PM issues
 
 Other: (Because of no maintainer)
  - memstick: rtsx_usb_ms: Fix runtime PM issues
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYCJimAAoJEP4mhCVzWIwpCi0P/0IQuR0GoR1DSYz6L8WXshn0
 xsHyOB19/vWoQQZH41UzpqvMQq8AMSnkTPjoEYtUDzRsmyncsb4W+OV6I957RihM
 saKmz71hPm8AqN6IyoYIXYubDNAQ4mWcY75StkbQ1UHuFgW66Dn2Yncm1Kq4a9px
 e0/GKS3gAE5fG/524PwW6J8JvtkkZ8QTOun9ltZolAIZ7uqLYBL2n77d0AtO94Wf
 ZeUW+Ud+W5Pf1PeEvAfgAEz9FTiUQEft/KI37nX6qOD9YDJszZnN29gf+kTxIGmk
 b67yDHx2YaLMqP2yYO+7QtMPpIAJpmhZw9llVDJInqad8EmQIqHZU54I7F+2SoAq
 nE71LFSNuXk+ZPE4ty5KvnnftbOi97x0FfqslspNdvl+wnprChPKTJCw7H4cZLEs
 vUUiUDZg8SEfg3S/iX/9C1CdpYx0inVN8SzyG6EhVFotsHAJvK3jZ4mW/YDCaz3n
 RVVjE9mgFemW2Q3OW+Ow4mNgcIOevfXJZoX4vZxNU/YV7NPxUhkcxLTzaWYyon+U
 H52ClmLGNUhmm39vMGOC9ZhSGTlzjM/CdRBUQgUeUDDfARLg1+YABSzDAWf3WcH7
 7vtxjGyCleMXU+c6MdkvlFmkuhGsZhkON+0Po5rZfYqLluKaM4U3Z4vO4oKpDFVT
 XpfC33TvafXmlSEcGQxp
 =Oy6R
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.9 rc2.

  This time I have also included a few changes for a memstick driver
  which has a corresponding mmc driver. They use the same USB device as
  parent, hence both needs to play nice with runtime PM, which they
  didn't.

  MMC core:
   - Update MAINTAINERS as the mmc tree moved to kernel.org
   - A few fixes for HS400es mode
   - A few other minor fixes

  MMC host:
   - sdhci: Fix an issue when dealing with stop commands
   - sdhci-pci: Fix a bus power failure issue
   - sdhci-esdhc-imx: Correct two register accesses
   - sdhci-of-arasan: Fix the 1.8V I/O signal switch behaviour
   - rtsx_usb_sdmmc: Fix runtime PM issues

  Other: (Because of no maintainer)
   - memstick: rtsx_usb_ms: Fix runtime PM issues"

* tag 'mmc-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  MAINTAINERS: mmc: Move the mmc tree to kernel.org
  memstick: rtsx_usb_ms: Manage runtime PM when accessing the device
  memstick: rtsx_usb_ms: Runtime resume the device when polling for cards
  mmc: rtsx_usb_sdmmc: Handle runtime PM while changing the led
  mmc: rtsx_usb_sdmmc: Avoid keeping the device runtime resumed when unused
  mmc: sdhci: cast unsigned int to unsigned long long to avoid unexpeted error
  mmc: sdhci-esdhc-imx: Correct two register accesses
  mmc: sdhci-pci: Fix bus power failing to enable for some Intel controllers
  mmc: sdhci-pci: Let devices define their own sdhci_ops
  mmc: sdhci: Rename sdhci_set_power() to sdhci_set_power_noreg()
  mmc: sdhci: Fix SDHCI_QUIRK2_STOP_WITH_TC
  mmc: core: Annotate cmd_hdr as __le32
  mmc: sdhci-of-arasan: add sdhci_arasan_voltage_switch for arasan, 5.1
  mmc: core: changes frequency to hs_max_dtr when selecting hs400es
  mmc: core: switch to 1V8 or 1V2 for hs400es mode
  mmc: block: add missing header dependencies
  mmc: sdhci-of-arasan: Fix non static symbol warning
2016-10-20 08:59:12 -07:00
Ard Biesheuvel
6026ed2fe2 MAINTAINERS: Add myself as EFI maintainer
At the request of Matt, I am taking up co-maintainership of the EFI
subsystem. So add my name to the EFI section in MAINTAINERS, and
change the SCM tree reference to point to the new shared Git repo.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20161018143318.15673-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-18 17:11:14 +02:00
Jisheng Zhang
70e1a28fe1 MAINTAINERS: add myself as Marvell berlin SoC maintainer
I would like to take maintainership for Marvell berlin SoCs.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-17 14:31:37 -07:00
Ulf Hansson
82bb095ee9 MAINTAINERS: mmc: Move the mmc tree to kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-10-17 15:46:05 +02:00
Joao Pinto
dabe7ecc57 PCI: designware-plat: Change maintainer to Jose Abreu
Change designware-plat maintainer to Jose Abreu.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-17 07:53:26 -05:00
Linus Torvalds
133d970e0d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...
2016-10-15 09:26:12 -07:00
Linus Torvalds
5d89d9f502 linux-kselftest-4.9-rc1-update
This update consists of:
 
 - Fixes and improvements to existing tests
 - Moving code from Documentation to selftests, samples, and tools.
 
   Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and networking
   tests from Documentation to selftests.
 
   Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay, and
   blackfin examples from Documentation to samples.
 
   Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
   Documentation to tools.
 
   Deletes BUILD_DOCSRC and its dependencies.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX/6zUAAoJEAsCRMQNDUMczIEP/0kH+yjJ3El4GYIokspR1/UU
 ++sy4XMzrD1UPy90v+ftcg4ss5R80r0v7EZ59k1UjDJSZ6WATHHGoZKCS2Dy3xcq
 i+0vm7Bawh7YWrXD3TunwaL97lwb2DdVTSxRXuU4Hfv+oVynUfh/+ZlCH6RCM2nm
 ZJE5PDYiq4nTVSRqFB2FyRE6yay5dPvpQ2ArwnSEw+ku4C+ZdGTGCWzS+aZBwZM/
 ykePkGLVRXz9FsWTCmipJzYu0Z/M4xEGlfXQZiiLG2HicbJNP6AqJImbQrANm+TW
 RFigYpofdhr9XG5TKTLIudaRt9qB6BE0mYEApZXH8U7NrHElfO9BBMEwzajl0V/2
 q/r5iej/CJult3zsfkhdHo7GLXpOaDLyoXiUI6UTgL0XOdWLAWTqDYx4JJz9sXxp
 B9dwKJeP5HLipk6FMkAHgJM90JKQFd/nLDKxeWexbMu/b/yQ2C9AR7NpdQ+c1X7I
 8W8UNEi/fnK75+r4t3NfeD2/5boq/jwujSKEMDQm/3R8L8EFYYb/TRoujFn89Na3
 wbZLV3hBL+KQ5lRyIx7X8RKyVJv1nlo9Wh57ItJed6zvGp5EmsI8w+DER2RfbO2c
 HR2JPDKSxmU8O2WBfDW5QoiPQH8Lssd147Ir0UFE7mwBXgWWsmxJxDpufizAXwyJ
 qnELJ9X3UFIdydtoObLr
 =60kH
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This update consists of:

   - Fixes and improvements to existing tests

   - Moving code from Documentation to selftests, samples, and tools:

     * Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and
       networking tests from Documentation to selftests.

     * Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay,
       and blackfin examples from Documentation to samples.

     * Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
       Documentation to tools.

     * Deletes BUILD_DOCSRC and its dependencies"

* tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
  selftests/futex: Check ANSI terminal color support
  Doc: update 00-INDEX files to reflect the runnable code move
  samples: move blackfin gptimers-example from Documentation
  tools: move pcmcia crc32hash tool from Documentation
  tools: move laptops dslm tool from Documentation
  tools: move accounting tool from Documentation
  samples: move auxdisplay example code from Documentation
  samples: move watchdog example code from Documentation
  samples: move timers example code from Documentation
  samples: move misc-devices/mei example code from Documentation
  samples: move mic/mpssd example code from Documentation
  selftests: Move networking/timestamping from Documentation
  selftests: move watchdog tests from Documentation/watchdog
  selftests: move ia64 tests from Documentation/ia64
  selftests: move vDSO tests from Documentation/vDSO
  selftests: move ptp tests from Documentation/ptp
  selftests: move prctl tests from Documentation/prctl
  selftests: move dnotify_test from Documentation/filesystems
  selftests/timers: Add missing error code assignment before test
  selftests/zram: replace ZRAM_LZ4_COMPRESS
  ...
2016-10-14 15:17:12 -07:00
Linus Torvalds
689f891c98 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull some more input subsystem updates from Dmitry Torokhov:
 "An update to the ALPS driver to support the V8 protocol with
  touchstick, a change for i8042 to skip selftest on many Asus laptops
  which helps to keep their touchpads working after resume, and a couple
  other driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - skip selftest on ASUS laptops
  Input: melfas_mip4 - add ic_name sysfs attribute
  Input: melfas_mip4 - add maintainer information
  Input: melfas_mip4 - add devicetree binding documentations
  Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled
  Input: synaptics-rmi4 - fix error handling in I2C transport driver
  Input: synaptics-rmi4 - fix error handling in SPI transport driver
  Input: ALPS - add V8 protocol documentation
  Input: ALPS - set DualPoint flag for 74 03 28 devices
  Input: ALPS - allow touchsticks to report pressure
  Input: ALPS - handle 0-pressure 1F events
  Input: ALPS - add touchstick support for SS5 hardware
  Input: elantech - force needed quirks on Fujitsu H760
  Input: elantech - fix Lenovo version typo
2016-10-14 13:19:30 -07:00
Linus Torvalds
b41d037a1f More ACPI updates for v4.9-rc1
- Fix an unused function warning that started to appear after recent
    changes in the ACPI EC driver (Eric Biggers).
 
  - Fix the KERN_CONT usage in acpi_os_vprintf() that has become
    (particularly) annoying recently (Joe Perches).
 
  - Fix the fan status checking in the ACPI fan driver to avoid
    returning incorrect error codes sometimes (Srinivas Pandruvada).
 
  - Fix the ACPI Processor Aggregator driver (PAD) to always let the
    special processor_aggregator driver from Xen take over when
    running as Xen dom0 (Juergen Gross).
 
  - Update the handling of reference device properties in ACPI by
    allowing empty rows ("holes") to appear in reference property
    lists (Mika Westerberg).
 
  - Add a new MAINTAINERS entry for ACPI on ARM64 (Lorenzo Pieralisi).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJYANsFAAoJEILEb/54YlRxl/QP/1ZT7CtX5/gsXRZs3z71qgLb
 ULtnDbHUbztmTypg9Igt5RmCwjJm6a70HpLLes4fdRKq54V1EVT0vchncKsxyGQ/
 KoWBtq8e+1jXJcVehwxxleQZ8F65GFjvJ8wZz1YJZ/5t6/5LSkculCFF1fXLXfaI
 ux8Pm/nCXEyn1Z791/47HNMJ7wWnOehAxOpal6ozPkGOA55nEyk5E9zXg2Il9+4u
 kx68DWDkLGkXGHRfiXo/M2TyID7NsCx0IKTaauihIAic49hN+k1ysfpj73yx3FE2
 3wzW0eW6pLqhO3JwgUIGHfZEsFfOuh9PUA2RPpz4iOYh+a16PoVkh2sQ4BuS1vuo
 8WVUCZotXwQ4RI68sa4NC1y2JpktVdPzx+JXX/3jqNpSMtpFfsPDEQaGkM9oTu39
 BaRpaPm0nonCfH9rd0KPkOocWddBW3aNsZFW+SCiwSpuLNXvjUIdzAJPiKLLoyV1
 CL0EwikBCSHWWccaPZLch7zLNyAtFhymUR1dmLK5EtU4sujExJa4tuAz/MfqHN1C
 EzkGNpTHHUW6jO1C46L3o83iEsHg6R8PYvSSi5CwezdbXGoJjrOaB3lAUfklpvKW
 uJ6oiD08RpwYY+yw6qLaHuxClUeK2Ja/NfIr9fGL2ID20lzWvS+BBSR0ZTz+Fglr
 xAtf5yQVu0JQSNgIXbnZ
 =vpTd
 -----END PGP SIGNATURE-----

Merge tag 'acpi-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "This includes a couple of fixes needed after recent changes, two ACPI
  driver fixes (fan and "Processor Aggregator"), an update of the ACPI
  device properties handling code and a new MAINTAINERS entry for ACPI
  on ARM64.

  Specifics:

   - Fix an unused function warning that started to appear after recent
     changes in the ACPI EC driver (Eric Biggers).

   - Fix the KERN_CONT usage in acpi_os_vprintf() that has become
     (particularly) annoying recently (Joe Perches).

   - Fix the fan status checking in the ACPI fan driver to avoid
     returning incorrect error codes sometimes (Srinivas Pandruvada).

   - Fix the ACPI Processor Aggregator driver (PAD) to always let the
     special processor_aggregator driver from Xen take over when running
     as Xen dom0 (Juergen Gross).

   - Update the handling of reference device properties in ACPI by
     allowing empty rows ("holes") to appear in reference property lists
     (Mika Westerberg).

   - Add a new MAINTAINERS entry for ACPI on ARM64 (Lorenzo Pieralisi)"

* tag 'acpi-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT
  ACPI / PAD: don't register acpi_pad driver if running as Xen dom0
  ACPI / property: Allow holes in reference properties
  MAINTAINERS: Add ARM64-specific ACPI maintainers entry
  ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n
  ACPI / fan: Fix error reading cur_state
2016-10-14 12:50:05 -07:00
Linus Torvalds
b56061b04e SCSI misc on 20161014
This is just a set of minor updates and fixes which weren't quite ready in
 time for the first pull request.  The only real thing of note is Mike Christie
 is stepping down as Maintainer of iscsi to be replaced by Lee Duncan and Chris
 Leech.
 
 Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYAHcdAAoJEAVr7HOZEZN4vVcP/RaPUje4SVeQDHHBBFDCBJks
 cX7AmpLNFF8Wha3L3ARkQIF1MlaUDurU8LXTjgS8YW9q+xs0mEhmt9VHhE39sWI4
 9d27d2kor2ajgKH0/1Q1+I/2IsPx9wV6vJwb0vDxfqin2puzNk9qdkSeioLmaOca
 L91Sg96YbfTdWyW9VkAclUCy/QuoeUVQm08FdvnLscwI/wO7vHPP7qYQ8NJYfJq6
 RM9YdRdwFENAey9RtD+6x3SPRifixhxlgYVrf60EOqjiZppCn5AHeNtB23nfEj2u
 Sf58ZPmxF3vfnwJcDAsy5HmnssqqsN+fgpE884ja/+afSY05wrquTQMJ2osdnE13
 br80bOAxaOM71Sm7dfSMW5LudtDhuhzd/mDA+XJ2fy8d6yS+Odw/wMT6u+bl2OF3
 3rXKwiiB6+tStVrMEKZugftBMDcNX5U+kjsF/tw9nE7VduB5aBHlA1SdMzPlzHgz
 3CzQ5aGrIV1aHqn1OOttU7qaxH7fCHgVvGXco4+6gmIR4fxgnbHEeaMqVW9YblFm
 jId5DfI3QuNuBfpyLSJle7lGxuBZp1J9VsFkM20ScFw7Hbz9+zdxDNNRLHeB+ZXn
 LtzvY4XCnPqyhoZ9wYVZaHAbO5EHJCdPjpSa5ezyMUBVlb8g1Jme0bcPN7U2pOVL
 eWl3zBJ2g6uths++Nde1
 =bAub
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is just a set of minor updates and fixes which weren't quite
  ready in time for the first pull request.

  The only real thing of note is Mike Christie is stepping down as
  Maintainer of iscsi to be replaced by Lee Duncan and Chris Leech"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Kconfig fix
  scsi: g_NCR5380: Stop using scsi_module.c
  scsi: g_NCR5380: Reduce overrides[] from array to struct
  scsi: g_NCR5380: Remove deprecated __setup
  scsi: ufs: Fix error return code in ufshcd_init()
  scsi: ufs: Data Segment only needed for WRITE DESCRIPTOR
  scsi: cxgb4i: Set completion bit in work request
  MAINTAINERS: Update open-iscsi maintainers
  scsi: ufs: Enable no vccq quirk for skhynix device
  scsi: be2iscsi: mark symbols static where possible
2016-10-14 11:37:50 -07:00
Linus Torvalds
d8bfb96a2e powerpc updates for 4.9 #2
Freescale updates from Scott:
 
 "Highlights include qbman support (a prerequisite for datapath drivers
 such as ethernet), a PCI DMA fix+improvement, reset handler changes, more
 8xx optimizations, and some cleanups and fixes."
 
 Fixes:
  - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman)
  - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman)
  - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour)
  - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin)
  - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras)
  - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman)
 
 Other:
  - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson)
  - MAINTAINERS: Drop separate pseries entry (Michael Ellerman)
  - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX/1EOAAoJEFHr6jzI4aWAu0UQAIsmnc361a4xOl1ODRzJNWSD
 OqBbuGQPZ3I3XPMxB6BBK4mnpR507nb+L1yxMDidDebJal/pRJdXkGi7I5pe9uq+
 12XJcaePtVfmrHKKWAhC/fef0gQHSusBDpIIDquN5QE1BVvUDGbynG4GjnpX9ZaT
 gmXGL03u/yJvUoUNexG7lrMAJ7bZgU8BzFKyojzWtoEDF4SM7rpWKs1hGwojW4/T
 EYcek5uTNo01UsN/WNrtBkHA8eC9unnLk9NisOxvBXu7eJfEq38Bz71fhoowFO+C
 FDRboPdkXxySzzNTBb3hROontLZS2S13upzjcrRo2/f4gxvcimRJtDzxuRKrYX5n
 xdXcZVdFSRsKanbuV0Dwjki05IU4zeOhsHUqYqaS2UD+QlAbNCu0N9DZOhPMn+H2
 8uT3cOOrBLBrhIH3e7DMK9Rx97FBeuCvwrbjnZp8My7s55VXXd2CZTFYf5/wW0b2
 VEf5eoXM1BB2zuh9kFZ785Sq5iYnsKoNhKjoXULkBrf3m7WtmjPIbHzRTJM5ltwt
 YUvFMG6nncQB0ERVOvDIXXNzwVB0JkJTVX2BBZ2a7Fr+8KHE6rTYkgcQiosibUmq
 gLV9M59MFamAgJlna3A1OmGIpEiZ3RrriYL2mgraWwuLUn/qW3yPiPE6hBk0uomL
 cARvlIjGf8rWhi+3qAb1
 =lwsd
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
 "Some more powerpc updates for 4.9:

  Freescale updates from Scott Wood:
   - qbman support (a prerequisite for datapath drivers such as ethernet)
   - a PCI DMA fix+improvement
   - reset handler changes
   - more 8xx optimizations
   - some cleanups and fixes.'

  Fixes:
   - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman)
   - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman)
   - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour)
   - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin)
   - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras)
   - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman)

  Other:
   - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson)
   - MAINTAINERS: Drop separate pseries entry (Michael Ellerman)
   - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman):

* tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (35 commits)
  powerpc/mm/hash64: Fix might_have_hea() check
  powerpc/64: Fix incorrect return value from __copy_tofrom_user
  powerpc/64s: Fix power4_fixup_nap placement
  powerpc/pseries: Fix stack corruption in htpe code
  selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes
  MAINTAINERS: Update powerpc website & add selftests
  MAINTAINERS: Drop separate pseries entry
  MAINTAINERS: Remove myself from PA Semi entries
  selftests/powerpc: Add missing binaries to .gitignores
  arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig
  soc/qman: Add self-test for QMan driver
  soc/bman: Add self-test for BMan driver
  soc/fsl: Introduce DPAA 1.x QMan device driver
  soc/fsl: Introduce DPAA 1.x BMan device driver
  powerpc/8xx: make user addr DTLB miss the short path
  powerpc/8xx: Move additional DTLBMiss handlers out of exception area
  powerpc/8xx: use r3 to scratch CR in ITLBmiss
  soc/fsl/qe: fix gpio save_regs functions
  powerpc/8xx: add dedicated machine check handler
  powerpc/8xx: add system_reset_exception
  ...
2016-10-14 11:07:42 -07:00
Rafael J. Wysocki
3f62d5269b Merge branches 'device-properties' and 'acpi-misc'
* device-properties:
  ACPI / property: Allow holes in reference properties

* acpi-misc:
  MAINTAINERS: Add ARM64-specific ACPI maintainers entry
2016-10-14 14:09:57 +02:00
Linus Torvalds
40bd3a5f34 PCI changes for the v4.9 merge window:
Altera host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
     Rename altera_pcie_valid_config() to altera_pcie_valid_device() (Bjorn Helgaas)
     Simplify TLB_CFG_DW0 usage (Bjorn Helgaas)
     Simplify TLP_CFG_DW1 usage (Bjorn Helgaas)
 
   APM X-Gene host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     Pass struct xgene_pcie_port to setup functions (Bjorn Helgaas)
     Add register accessors (Bjorn Helgaas)
 
   Axis ARTPEC-6 host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     Add register accessors (Bjorn Helgaas)
     Use generic DesignWare accessors (Bjorn Helgaas)
     Remove unnecessary artpec6_pcie_link_up() (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Add resource name comments (Bjorn Helgaas)
 
   Broadcom iProc host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Set drvdata at end of probe function (Bjorn Helgaas)
     Validate CSR base in BCMA setup code (Bjorn Helgaas)
     Remove redundant null pointer checking (Bjorn Helgaas)
     Hard-code PCIe capability offset instead of searching (Bjorn Helgaas)
 
   Freescale i.MX6 host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove redundant of_node pointer (Bjorn Helgaas)
     Removed unused struct imx6_pcie.mem_base (Bjorn Helgaas)
     Pass struct imx6_pcie to PHY accessors (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Use generic DesignWare accessors (Bjorn Helgaas)
     Reorder struct imx6_pcie (Bjorn Helgaas)
     Remove unused return values (Bjorn Helgaas)
 
   Freescale Layerscape host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     Remove redundant struct ls_pcie.dbi (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Move struct pcie_port setup to probe function (Bjorn Helgaas)
     Remove unused ls_add_pcie_port() platform_device arg (Bjorn Helgaas)
     Reorder struct ls_pcie (Bjorn Helgaas)
 
   HiSilicon host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     Name private struct pointer "hisi_pcie" consistently (Bjorn Helgaas)
     Remove redundant struct hisi_pcie.reg_base (Bjorn Helgaas)
     Use generic DesignWare accessors (Bjorn Helgaas)
     Include register block base in PCIE_SYS_STATE4 address (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Reorder struct hisi_pcie (Bjorn Helgaas)
 
   Marvell Aardvark host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer (Thomas Petazzoni)
 
   Marvell Armada host bridge driver
     Remove unused platform data (Bjorn Helgaas)
     Add local base pointer (Bjorn Helgaas)
     Remove redundant struct armada8k_pcie.base (Bjorn Helgaas)
     Use generic DesignWare accessors (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Reorder struct armada8k_pcie (Bjorn Helgaas)
     MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver (Thomas Petazzoni)
 
   Marvell MVEBU host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Use existing of_node pointer (Bjorn Helgaas)
 
   NVIDIA Tegra host bridge driver
     Fix argument order in tegra_pcie_phy_disable() (Bjorn Helgaas)
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
 
   Qualcomm host bridge driver
     Remove unused platform data (Bjorn Helgaas)
     Remove redundant struct qcom_pcie.dbi (Bjorn Helgaas)
     Remove redundant struct qcom_pcie.dev (Bjorn Helgaas)
     Reorder struct qcom_pcie (Bjorn Helgaas)
 
   Renesas R-Car host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     Remove unused rcar_pcie_get_resources() platform_device arg (Bjorn Helgaas)
     Remove DRV_NAME macro (Bjorn Helgaas)
     rcar-gen2: Add local struct device pointers (Bjorn Helgaas)
 
   Rockchip host bridge driver
     Remove unused platform data (Bjorn Helgaas)
     Indent "if" statement body (Dan Carpenter)
 
   Samsung Exynos host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Uninline register accessors (Bjorn Helgaas)
     Name private struct pointer "exynos_pcie" consistently (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Reorder struct exynos_pcie (Bjorn Helgaas)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Remove unused constants (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Reorder struct spear13xx_pcie (Bjorn Helgaas)
     Clean up struct device usage (Bjorn Helgaas)
 
   Synopsys DesignWare host bridge driver
     Rename dw_pcie_valid_config() to dw_pcie_valid_device() (Bjorn Helgaas)
     Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces (Bjorn Helgaas)
     Swap order of dw_pcie_writel_rc() reg/val arguments (Bjorn Helgaas)
     Export dw_pcie_readl_rc(), dw_pcie_writel_rc() (Bjorn Helgaas)
     Uninline register accessors (Bjorn Helgaas)
     Simplify dw_pcie_readl_unroll(), dw_pcie_writel_unroll() (Kishon Vijay Abraham I)
     Swap order of dw_pcie_writel_unroll() reg/val arguments (Bjorn Helgaas)
     designware-plat: Remove redundant dw_plat_pcie.mem_base (Bjorn Helgaas)
     designware-plat: Add local struct device pointers (Bjorn Helgaas)
     designware-plat: Remove unused platform data (Bjorn Helgaas)
 
   TI DRA7xx host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove redundant struct device pointer from dra7xx_pcie (Bjorn Helgaas)
     Set drvdata at end of probe function (Bjorn Helgaas)
     Use generic DesignWare accessors (Bjorn Helgaas)
     Pass device-specific struct to internal functions (Bjorn Helgaas)
     Move struct pcie_port setup to probe function (Bjorn Helgaas)
     Reorder struct dra7xx_pcie (Bjorn Helgaas)
 
   TI Keystone host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Use generic DesignWare accessors (Bjorn Helgaas)
     Pass keystone_pcie, not address, to IRQ functions (Bjorn Helgaas)
     Pass keystone_pcie, not va_app_base, to DBI functions (Bjorn Helgaas)
     Add app register accessors (Bjorn Helgaas)
     Reorder struct keystone_pcie (Bjorn Helgaas)
 
   Xilinx AXI host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
     Removed unused xilinx_pcie_assign_msi() argument (Bjorn Helgaas)
 
   Xilinx NWL host bridge driver
     Add local struct device pointers (Bjorn Helgaas)
     Remove unused platform data (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX/5JSAAoJEFmIoMA60/r8DgwQAL3rqok3OMp5mOFPTosLiGA5
 Pibrke/01imrOGT+vxo07K7AZhTkiOoVDDdwrYSOdTELc0bk8cjZUtjjzwQ0p1KP
 Xpq8mbX9EIZKrVhRYAFvtBMehw51l4D8RENF5GnyeJ04MDWzV7re1zsHuWAkUGC5
 9BP6DE0RGjddnyi8gRe39ZRVQofvZT9WgLb5LgnjpTgCpAcSBQBUlyynRlKcqmcY
 S2noNrIDb9KElpbw45egy11p79z6A6h9n6pfrzKff07Y3N1DFK2XeFoyoEHUnABM
 sicjjbR0W/udWm2eONLB8s1tYTJKL3zvNzWI1ywC3ESfmmt2iZ22pu0yxnjmdCRa
 vbBpQp/BfXH0yBd2Onl06EvyIBMEO35vBgiRUW/Su76JTh0jAHQh1k0lvK3l85qK
 mcpWQ5AwGquwywr3IhcAtuGI8SbrTZ2wElOJhRukwbZYF/RDKMKn71dSqd9ULTKl
 0w2hpeJW8Csl+2UwJQTtH9Pld3FXslBa1zM9WqUskxgbsch+ARb1zRwzXJj50E1A
 ekbWb/W7oxDPHKkK+hh5jc0zb/sEBdoBL0Vz1QuP7Al50b1FOS3tX4FdnfVZntTL
 vhDdo+0tCmbVAI6bRLPi0Q2Uyw6fl0f0preDXNs9siNDUjqRSqpGmY/qYXX97MRk
 /pFdD9BJw9uUONm4AQOf
 =Zq8E
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

PCI changes for the v4.9 merge window:
 "Here are some more changes I'd like to have in v4.9.  There's one
  small Tegra bug fix in the PHY poweroff path, which is only used in
  failure paths.

  The rest is all strictly cleanup that should make host bridge drivers
  more readable, but shouldn't actually change any behavior.

  Summary:

   - use local struct device pointers in many host bridge drivers for
     clarity

   - remove unused platform data

   - use generic DesignWare accessors

   - misc cleanups: remove redundant structure entries and re-order
     structure members to put comon generic fields first etc"

* tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
  MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer
  PCI: rockchip: Indent "if" statement body
  PCI: hisi: Reorder struct hisi_pcie
  PCI: hisi: Pass device-specific struct to internal functions
  PCI: hisi: Include register block base in PCIE_SYS_STATE4 address
  PCI: dra7xx: Reorder struct dra7xx_pcie
  PCI: xilinx-nwl: Remove unused platform data
  PCI: xilinx-nwl: Add local struct device pointers
  PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument
  PCI: xilinx: Remove unused platform data
  PCI: xilinx: Add local struct device pointers
  PCI: xgene: Add register accessors
  PCI: xgene: Pass struct xgene_pcie_port to setup functions
  PCI: xgene: Remove unused platform data
  PCI: tegra: Remove unused platform data
  PCI: tegra: Add local struct device pointers
  PCI: tegra: Fix argument order in tegra_pcie_phy_disable()
  PCI: rockchip: Remove unused platform data
  PCI: rcar-gen2: Add local struct device pointers
  ...
2016-10-13 17:08:58 -07:00
Linus Torvalds
084165a3f8 fbdev changes for 4.9
Main changes:
 
 - amba-cldc: DT backlight support, Nomadik support, Versatile improvements, fixes
 - efifb: fix fbcon RGB565 palette
 - exynos: remove unused DSI driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX/f2zAAoJEPo9qoy8lh71a4sP/2lEHhzzqBri63FOrLaIGxUh
 lBZLSC9mMMzlsJtZhalaKBPe7dQ4EwPPqb7QiIuY71Q7Ap+j6oqaY7m4hgxsH4Zm
 jSgWNwVy+LhQ/r4eI355opvvHpGLZaIl6ZN8tFmvcm9bTE4iIkNkxq5Bhk6Bjwkc
 8jV8vwYRDfJA4NZgSuGIzRzLkscryy/QApaH536jDx4xoc+un6a759B6FQLAFVkS
 GwcjHbr3SSf5aj+0eEaJ59I3rgdPJy8YkFO7PpwKhgqTuCskOXKBvVtmlgfOh2vI
 76W2l3SELXCY7VmFkN0sp6xbPWYKIygdT849oF2grAPh/7ykOb0IsT4i4iVSzL29
 Nhl/G2s93NGFb3HtO0gAlBq9M0FSLQEywXPbN8GmiGVI5yHVYlFwKOL0H0uQANNl
 pCVCHuBkEkY2mX1QoCRhRl1ps9d+VfZzNo8I1JR6A8M52WtYjGiomISYz0dUmSFR
 3X5V6TLYFya+1sf3Gkvpl5yLkFB8NkCkdn6kcT1cpU2SyxzmQX5J/EwMlOXL1qSE
 d+pZZlMQ2Kli6LeMoAyzfdYgDWldP1CqU06Zcu3aFrAKmIZmLZGgJPq72TApK4L7
 o5R795aS6a/0CbihEuJt1LhR3QIQfYXlXJq860YT5he6yBO1wGC+JN2qMEFdU+SH
 phnxFjO2n/kI0JjQsewF
 =FN42
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 "Main changes:

   - amba-cldc: DT backlight support, Nomadik support, Versatile
     improvements, fixes

   - efifb: fix fbcon RGB565 palette

   - exynos: remove unused DSI driver"

* tag 'fbdev-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits)
  video: smscufx: remove unused variable
  matroxfb: fix size of memcpy
  fbdev: ssd1307fb: fix a possible NULL dereference
  fbdev: ssd1307fb: constify the device_info pointer
  simplefb: Disable and release clocks and regulators in destroy callback
  video: fbdev: constify fb_fix_screeninfo and fb_var_screeninfo structures
  matroxfb: constify local structures
  video: fbdev: i810: add in missing white space in error message text
  video: fbdev: add missing \n at end of printk error message
  ARM: exynos_defconfig: Remove old non-working MIPI driver
  video: fbdev: exynos: Remove old non-working MIPI driver
  omapfb: fix return value check in dsi_bind()
  MAINTAINERS: update fbdev entries
  video: fbdev: offb: Call pci_enable_device() before using the PCI VGA device
  fbdev: vfb: simplify memory management
  fbdev: vfb: add option for video mode
  fbdev: vfb: add description to module parameters
  video: fbdev: intelfb: remove impossible condition
  fb: adv7393: off by one in probe function
  video: fbdev: pxafb: add missing of_node_put() in of_get_pxafb_mode_info()
  ...
2016-10-12 11:01:37 -07:00
Bjorn Helgaas
217c6d21e9 Merge branches 'pci/host-armada', 'pci/host-artpec', 'pci/host-dra7xx', 'pci/host-exynos', 'pci/host-hisi', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-layerscape', 'pci/host-qcom' and 'pci/host-spear' into next
* pci/host-armada:
  MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
  PCI: armada: Reorder struct armada8k_pcie
  PCI: armada: Pass device-specific struct to internal functions
  PCI: armada: Use generic DesignWare accessors
  PCI: armada: Remove redundant struct armada8k_pcie.base
  PCI: armada: Add local base pointer
  PCI: armada: Remove unused platform data

* pci/host-artpec:
  PCI: artpec6: Add resource name comments
  PCI: artpec6: Pass device-specific struct to internal functions
  PCI: artpec6: Remove unnecessary artpec6_pcie_link_up()
  PCI: artpec6: Use generic DesignWare accessors
  PCI: artpec6: Add register accessors
  PCI: artpec6: Remove unused platform data
  PCI: artpec6: Add local struct device pointers

* pci/host-dra7xx:
  PCI: dra7xx: Reorder struct dra7xx_pcie
  PCI: dra7xx: Move struct pcie_port setup to probe function
  PCI: dra7xx: Pass device-specific struct to internal functions
  PCI: dra7xx: Use generic DesignWare accessors
  PCI: dra7xx: Set drvdata at end of probe function
  PCI: dra7xx: Remove redundant struct device pointer from dra7xx_pcie
  PCI: dra7xx: Add local struct device pointers

* pci/host-exynos:
  PCI: exynos: Reorder struct exynos_pcie
  PCI: exynos: Pass device-specific struct to internal functions
  PCI: exynos: Name private struct pointer "exynos_pcie" consistently
  PCI: exynos: Uninline register accessors
  PCI: exynos: Add local struct device pointers

* pci/host-hisi:
  PCI: hisi: Reorder struct hisi_pcie
  PCI: hisi: Pass device-specific struct to internal functions
  PCI: hisi: Include register block base in PCIE_SYS_STATE4 address
  PCI: hisi: Use generic DesignWare accessors
  PCI: hisi: Remove redundant struct hisi_pcie.reg_base
  PCI: hisi: Name private struct pointer "hisi_pcie" consistently
  PCI: hisi: Remove unused platform data
  PCI: hisi: Add local struct device pointers

* pci/host-imx6:
  PCI: imx6: Remove unused return values
  PCI: imx6: Reorder struct imx6_pcie
  PCI: imx6: Use generic DesignWare accessors
  PCI: imx6: Pass device-specific struct to internal functions
  PCI: imx6: Pass struct imx6_pcie to PHY accessors
  PCI: imx6: Removed unused struct imx6_pcie.mem_base
  PCI: imx6: Remove redundant of_node pointer
  PCI: imx6: Add local struct device pointers

* pci/host-keystone:
  PCI: keystone: Reorder struct keystone_pcie
  PCI: keystone: Add app register accessors
  PCI: keystone: Pass keystone_pcie, not va_app_base, to DBI functions
  PCI: keystone: Pass keystone_pcie, not address, to IRQ functions
  PCI: keystone: Use generic DesignWare accessors
  PCI: keystone: Add local struct device pointers

* pci/host-layerscape:
  PCI: layerscape: Reorder struct ls_pcie
  PCI: layerscape: Remove unused ls_add_pcie_port() platform_device arg
  PCI: layerscape: Move struct pcie_port setup to probe function
  PCI: layerscape: Pass device-specific struct to internal functions
  PCI: layerscape: Remove redundant struct ls_pcie.dbi
  PCI: layerscape: Remove unused platform data
  PCI: layerscape: Add local struct device pointers

* pci/host-qcom:
  PCI: qcom: Reorder struct qcom_pcie
  PCI: qcom: Remove redundant struct qcom_pcie.dev
  PCI: qcom: Remove redundant struct qcom_pcie.dbi
  PCI: qcom: Remove unused platform data

* pci/host-spear:
  PCI: spear: Clean up struct device usage
  PCI: spear: Reorder struct spear13xx_pcie
  PCI: spear: Pass device-specific struct to internal functions
  PCI: spear: Remove unused constants
2016-10-12 11:15:06 -05:00
Thomas Petazzoni
3dc9d38c0c MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-12 11:13:36 -05:00
Thomas Petazzoni
441106d934 MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-12 11:12:24 -05:00
Linus Torvalds
6b25e21fa6 Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Core:
   - Fence destaging work
   - DRIVER_LEGACY to split off legacy drm drivers
   - drm_mm refactoring
   - Splitting drm_crtc.c into chunks and documenting better
   - Display info fixes
   - rbtree support for prime buffer lookup
   - Simple VGA DAC driver

  Panel:
   - Add Nexus 7 panel
   - More simple panels

  i915:
   - Refactoring GEM naming
   - Refactored vma/active tracking
   - Lockless request lookups
   - Better stolen memory support
   - FBC fixes
   - SKL watermark fixes
   - VGPU improvements
   - dma-buf fencing support
   - Better DP dongle support

  amdgpu:
   - Powerplay for Iceland asics
   - Improved GPU reset support
   - UVD/VEC powergating support for CZ/ST
   - Preinitialised VRAM buffer support
   - Virtual display support
   - Initial SI support
   - GTT rework
   - PCI shutdown callback support
   - HPD IRQ storm fixes

  amdkfd:
   - bugfixes

  tilcdc:
   - Atomic modesetting support

  mediatek:
   - AAL + GAMMA engine support
   - Hook up gamma LUT
   - Temporal dithering support

  imx:
   - Pixel clock from devicetree
   - drm bridge support for LVDS bridges
   - active plane reconfiguration
   - VDIC deinterlacer support
   - Frame synchronisation unit support
   - Color space conversion support

  analogix:
   - PSR support
   - Better panel on/off support

  rockchip:
   - rk3399 vop/crtc support
   - PSR support

  vc4:
   - Interlaced vblank timing
   - 3D rendering CPU overhead reduction
   - HDMI output fixes

  tda998x:
   - HDMI audio ASoC support

  sunxi:
   - Allwinner A33 support
   - better TCON support

  msm:
   - DT binding cleanups
   - Explicit fence-fd support

  sti:
   - remove sti415/416 support

  etnaviv:
   - MMUv2 refactoring
   - GC3000 support

  exynos:
   - Refactoring HDMI DCC/PHY
   - G2D pm regression fix
   - Page fault issues with wait for vblank

  There is no nouveau work in this tree, as Ben didn't get a pull
  request in, and he was fighting moving to atomic and adding mst
  support, so maybe best it waits for a cycle"

* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
  drm/crtc: constify drm_crtc_index parameter
  drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
  drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
  drm/i915: Reset the breadcrumbs IRQ more carefully
  drm/i915: Force relocations via cpu if we run out of idle aperture
  drm/i915: Distinguish last emitted request from last submitted request
  drm/i915: Allow DP to work w/o EDID
  drm/i915: Move long hpd handling into the hotplug work
  drm/i915/execlists: Reinitialise context image after GPU hang
  drm/i915: Use correct index for backtracking HUNG semaphores
  drm/i915: Unalias obj->phys_handle and obj->userptr
  drm/i915: Just clear the mmiodebug before a register access
  drm/i915/gen9: only add the planes actually affected by ddb changes
  drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
  drm/i915/bxt: Fix HDMI DPLL configuration
  drm/i915/gen9: fix the watermark res_blocks value
  drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
  drm/i915/gen9: minimum scanlines for Y tile is not always 4
  drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
  drm/i915/kbl: KBL also needs to run the SAGV code
  ...
2016-10-11 18:12:22 -07:00
Linus Torvalds
de34f4da7f media updates for v4.9-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX/QbjAAoJEAhfPr2O5OEVDKkP/30o73ZhzBkDR3xgApbmVdrw
 1NQYZq8UKibZ87hv949535N3lwaHFV0mA8ylheu2MMArd1GoZvyXKqNbJN9316kQ
 mSI8wVK77UiBP7RRolEepCuliQExNmayUm+kNZEZsF67+flilkcumCBqlPf114Sl
 ruhpGTSAIz2mgbxGsPkFiN+4xl2AZFOjiiHsp9doBE8HAtEp3PyCrPv5T6zkK7PQ
 KKf7ribcIB65tx0zBmhkfJOef/mqK/t7XgQS7kVRB3G4zr1nkh4g2iw/QbUreBtE
 94p1VYAMBFfpCNe1rWaaBOxYRLsDBMQHz2LvOvj8HZKrsuBCKQQ4jAoYQ4bNi8cu
 nWAb5Z19npoxJRYCGrPs8MJtCFD1IoT4zjiA8Ld5BT4SqBsCQ6VrgiUpQESzjtlj
 Xp7V1D2ak3vx40FAuDGZsb7JwGTuIrK18rZyKSjvHbnydWiJlaHY9kR3lOe91wc2
 MZOiD3K4lM5Lvse07nLVgOTjXW1fC3ScliRCQVLU/Wbm6A8UKiejES8sy0bFk9sU
 8Go3RaAPVeQLGFLqOJG+6yu7sJ1FCZzAthKbpxtY8p/iKZE4QO0n4Y6Q2NjcjHJt
 lDKYp83jne+AMthbLR+Ab6IL2GoOxaW6fnTrDioDxGc9Cvba90xYsZCIxbcGrM4h
 cu1bOLUp5Ei1wHvaqRla
 =JqCR
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Documentation improvements: conversion of all non-DocBook documents
   to Sphinx and lots of fixes to the uAPI media book

 - New PCI driver for Techwell TW5864 media grabber boards

 - New SoC driver for ATMEL Image Sensor Controller

 - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera
   drivers)

 - Addition of ST CEC driver

 - Lots of drivers fixes, improvements and additions

* tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits)
  [media] ttusb_dec: avoid the risk of go past buffer
  [media] cx23885: Fix some smatch warnings
  [media] si2165: switch to regmap
  [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging
  [media] si2165: Remove legacy attach
  [media] cx231xx: attach si2165 driver via i2c_client
  [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers
  [media] cx23885: attach si2165 driver via i2c_client
  [media] si2165: support i2c_client attach
  [media] si2165: avoid division by zero
  [media] rcar-vin: add R-Car gen2 fallback compatibility string
  [media] lgdt3306a: remove 20*50 msec unnecessary timeout
  [media] cx25821: Remove deprecated create_singlethread_workqueue
  [media] cx25821: Drop Freeing of Workqueue
  [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported
  [media] redrat3: hardware-specific parameters
  [media] redrat3: remove hw_timeout member
  [media] cxd2841er: BER and SNR reading for ISDB-T
  [media] dvb-usb: avoid link error with dib3000m{b,c|
  [media] dvb-usb: split out common parts of dibusb
  ...
2016-10-11 13:22:22 -07:00
Linus Torvalds
6b5e09a748 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Netfilter list handling fix, from Linus.

 2) RXRPC/AFS bug fixes from David Howells (oops on call to serviceless
    endpoints, build warnings, missing notifications, etc.) From David
    Howells.

 3) Kernel log message missing newlines, from Colin Ian King.

 4) Don't enter direct reclaim in netlink dumps, the idea is to use a
    high order allocation first and fallback quickly to a 0-order
    allocation if such a high-order one cannot be done cheaply and
    without reclaim. From Eric Dumazet.

 5) Fix firmware download errors in btusb bluetooth driver, from Ethan
    Hsieh.

 6) Missing Kconfig deps for QCOM_EMAC, from Geert Uytterhoeven.

 7) Fix MDIO_XGENE dup Kconfig entry. From Laura Abbott.

 8) Constrain ipv6 rtr_solicits sysctl values properly, from Maciej
    Żenczykowski.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  netfilter: Fix slab corruption.
  be2net: Enable VF link state setting for BE3
  be2net: Fix TX stats for TSO packets
  be2net: Update Copyright string in be_hw.h
  be2net: NCSI FW section should be properly updated with ethtool for BE3
  be2net: Provide an alternate way to read pf_num for BEx chips
  wan/fsl_ucc_hdlc: Fix size used in dma_free_coherent()
  net: macb: NULL out phydev after removing mdio bus
  xen-netback: make sure that hashes are not send to unaware frontends
  Fixing a bug in team driver due to incorrect 'unsigned int' to 'int' conversion
  MAINTAINERS: add myself as a maintainer of xen-netback
  ipv6 addrconf: disallow rtr_solicits < -1
  Bluetooth: btusb: Fix atheros firmware download error
  drivers: net: phy: Correct duplicate MDIO_XGENE entry
  ethernet: qualcomm: QCOM_EMAC should depend on HAS_DMA and HAS_IOMEM
  net: ethernet: mediatek: remove hwlro property in the device tree
  net: ethernet: mediatek: get hw lro capability by the chip id instead of by the dtsi
  net: ethernet: mediatek: get the chip id by ETHDMASYS registers
  net: bgmac: Fix errant feature flag check
  netlink: do not enter direct reclaim from netlink_dump()
  ...
2016-10-11 08:10:19 -07:00