The new IRQ column shows how many interrupts have occurred on each CPU
during the measurement inteval. This information comes from
the difference between /proc/interrupts shapshots made before
and after the measurement interval.
The first row, the system summary, shows the sum of the IRQS
for all CPUs during that interval.
Signed-off-by: Len Brown <len.brown@intel.com>
skip the open(2)/close(2) on each msr read
by keeping the /dev/cpu/*/msr files open.
The remaining read(2) is generally far fewer cycles
than the removed open(2) system call.
Signed-off-by: Len Brown <len.brown@intel.com>
By default...
Turbostat --debug gconfiguration info goes to stderr.
In FORK mode, turbostat statistics go to stderr.
In PERIODIC mode, turbostat statistics go to stdout.
These defaults do not change, but an option "--out file"
will send all output above only to the specified file.
Signed-off-by: Len Brown <len.brown@intel.com>
some tools processing turbostat output
have difficulty with items that begin with %...
Reported-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Following changes have been made:
- changed MSR_NHM_TURBO_RATIO_LIMIT to MSR_TURBO_RATIO_LIMIT in debug print
for consistency with Developer Manual
- updated definition of bitfields in MSR_TURBO_RATIO_LIMIT and appropriate
parsing code
- added x200 to list of architectures that do not support Nahlem compatible
definition of MSR_TURBO_RATIO_LIMIT register (x200 has the register but
bits definition is custom)
- fixed typo in code that parses MSR_TURBO_RATIO_LIMIT
(logical instead of bitwise operator)
- changed MSR_TURBO_RATIO_LIMIT parsing algorithm so the print out had the
same order as implementations for other platforms
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
x200 does not enable any way to programmatically obtain bus clock
speed. Bclk for the architecture has a fixed value of 100 MHz.
At the same time x200 cannot be included in has_snb_msrs since
it does not support C7 idle state.
prior to this patch, MHz values reported on this chip
were erroneously calculated using bclk of 133MHz,
causing MHz values to be reported 33% higher than actual.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat -i interval_sec
will sample and display statistics every interval_sec.
interval_sec used to be a whole number of seconds,
but now we accept a decimal, as small as 0.001 sec (1 ms).
Signed-off-by: Len Brown <len.brown@intel.com>
The topology test case of 'perf test' seems to be broken on my x86
system - due to the comparison of a "core-id" with # of CPUs online.
There are 8 online CPUs:
$ cat /sys/devices/system/cpu/online
0-7
but core-ids are not sequential and some core-ids exceed the number
of online CPUs.
$ cat /sys/devices/system/cpu/cpu?/topology/core_id
0
1
9
10
0
1
9
10
Looks like we can safely remove the check. Output before:
$ perf --version
perf version 4.4.rc1.g34258a
$ perf test -v topo
36: Test topology in session :
--- start ---
test child forked, pid 5906
templ file: /tmp/perf-test-vCwWG3
core_id number is too big.You may need to upgrade the perf tool.
test child interrupted
---- end ----
Test topology in session: FAILED!
and after:
$ perf test -v topo
36: Test topology in session :
--- start ---
test child forked, pid 6532
templ file: /tmp/perf-test-y10wFJ
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 9, socket 0
CPU 3, core 10, socket 0
CPU 4, core 0, socket 1
CPU 5, core 1, socket 1
CPU 6, core 9, socket 1
CPU 7, core 10, socket 1
test child finished with 0
---- end ----
Test topology in session: Ok
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/20151203233219.GA27696@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add metric only support for -A too. This requires a new print function
that prints the metrics in the right order.
v2: Fix manpage
v3: Simplify nrcpus computation
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new mode to only print metrics. Sometimes we don't care about the
raw values, just want the computed metrics. This allows more compact
printing, so with -I each sample is only a single line. This also
allows easier plotting and processing with other tools.
The main target is with using --topdown, but it also works with -T and
standard perf stat. A few metrics are not supported.
To avoiding having to hardcode all the metrics in the code it uses a two
pass approach: first compute dummy metrics and only print the headers in
the print_metric callback. Then use the callback to print the actual
values.
There are some additional changes in the stat printout code to handle
all metrics being on a single line.
One issue is that the column code doesn't know in advance what events
are not supported by the CPU, and it would be hard to find out as this
could change based on dynamic conditions. That causes empty columns in
some cases.
The output can be fairly wide, often you may need more than 80 columns.
Example:
% perf stat -a -I 1000 --metric-only
1.001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches
1.001452803 158.91% 0.66 2.39 2.92%
2.002192321 180.63% 0.76 2.08 2.96%
3.003088282 150.59% 0.62 2.57 2.84%
4.004369835 196.20% 0.98 1.62 3.79%
5.005227314 231.98% 0.84 1.90 4.71%
v2: Lots of updates.
v3: Use slightly narrower columns
v4: Add comment
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With all the recently added fields in the perf stat CSV output we should
finally document them in the man page. Do this here.
v2: Fix fields in documentation (Jiri)
v3: fix order of fields again (Jiri)
v4: Change order again.
v5: Document more fields (Jiri)
v6: Move time stamp first
v7: More fixes (Jiri)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The context menu in TUI hists browser checks corresponding sort keys
when creating the menu item. But hotkey actions lacks these checks so
it can filter using incorrect info.
For example, default sort key of 'perf top' doesn't contain 'comm' or
'pid' sort key so each hist entry's thread info is not reliable. Thus
it should prohibit using thread filter on 't' key.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 2eafd410e6 ("perf hists browser: Only 'Zoom into thread'
only when sort order has 'pid'") disabled thread filtering in hist
browser for the default sort key. However the he->thread is still valid
even if 'pid' sort key is not given. Only thing it should not use is
the pid (or tid) of the thread. So allow to filter by thread when
'comm' sort key is given and show pid only if 'pid' sort key is given.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sort__has_comm variable is to check whether the comm sort key is
given. This is necessary to support thread filtering in the TUI hists
browser later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hierarchy mode is enabled, each entry in a hierarchy level shares
the period. IOW an upper level entry's period is the sum of lower level
entries. Thus perf uses only one of them to calculate the total period
of hists. It was lowest-level (leaf) entries but it has a problem when
it comes to filters.
If a filter is applied, entries in the same level will be filtered or
not. But upper level entries still have period of their sum including
filtered one. So total sum of upper level entries will not be same as
sum of lower level entries.
This resulted in entries having more than 100% of overhead and it can be
produced using perf top with filter(s).
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist_browser__fprintf_hierarchy_entry() if to dump current output
into a file so it needs to be sync-ed with the corresponding function
hist_browser__show_hierarchy_entry(). So use hists->nr_hpp_node to
indent width and use first fmt_node to print overhead columns instead of
checking whether it's a sort entry (or dynamic entry).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not used anymore and the output format is accessed by the hpp_list
pointer instead when hierarchy is enabled. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a command-line filter is applied in hierarchy mode, output is
broken especially when filtering on lower level. The higher level
entries doesn't show up so it's hard to see the results.
Also it needs to handle multi sort keys in a single hierarchy level.
Before:
$ perf report --hierarchy -s 'cpu,{dso,comm}' --comms swapper --stdio
...
# Overhead CPU / Shared Object+Command
# ........... ...........................
#
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
11.89% [kernel.vmlinux] swapper
9.18% [kernel.vmlinux] swapper
After:
# Overhead CPU / Shared Object+Command
# ........... ...............................
#
33.09% 003
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
21.90% 002
11.89% [kernel.vmlinux] swapper
13.30% 001
9.18% [kernel.vmlinux] swapper
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions are for checkinf if a given perf_hpp_fmt is a
filter-related sort entry. With hierarchy mode, it needs to check
filters on the hist entries with its own hpp format list.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hierarchy mode is enabled each output format is in a separate hpp
list. So when applying a filter it should check all formats in the
list. Currently it only checks a single ->fmt field which was not set
properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Build jitdump only on architectures defined in util/genelf.h file, to avoid
breaking the build on such arches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160310164113.GA11357@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting TF prevents fastpath returns in most cases, which causes the
test to fail on 32-bit kernels because 32-bit kernels do not, in
fact, handle NT correctly on SYSENTER entries.
The next patch will fix 32-bit kernels.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/bd4bb48af6b10c0dc84aec6dbcf487ed25683495.1457578375.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's no need to use a const char pointer, we can used char pointer
from the beginning and omit the unnecessary cast.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160308184230.GB7897@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass perf_hpp_list all the way through setup_sort_list so that the sort
entry can be added on the arbitrary list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160309100417.GA30910@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the union in evsel so that the database id and priv pointer can
be used simultainously without conflicting and crashing.
Detailed Description for the fixed bug follows:
perf script crashes with a segmentation fault on user space tool version
4.5.rc7.ge2857b when using the python database export API. It works
properly in 4.4 and prior versions.
the crash fist appeared in:
cfc8874a48 ("perf script: Process cpu/threads maps")
How to reproduce the bug:
Remove any temporary files left over from a previous crash (if you have
already attemped to reproduce the bug):
$ rm -r test_db-perf-data
$ dropdb test_db
$ perf record timeout 1 yes >/dev/null
$ perf script -s scripts/python/export-to-postgresql.py test_db
Stack Trace:
Program received signal SIGSEGV, Segmentation fault.
__GI___libc_free (mem=0x1) at malloc.c:2929
2929 malloc.c: No such file or directory.
(gdb) bt
at util/stat.c:122
argv=<optimized out>, prefix=<optimized out>) at builtin-script.c:2231
argc=argc@entry=4, argv=argv@entry=0x7fffffffdf70) at perf.c:390
at perf.c:451
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: cfc8874a48 ("perf script: Process cpu/threads maps")
Link: http://lkml.kernel.org/r/1457500314-8912-1-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While building on a Docker container for ubuntu and installing package
by package one ends up with:
MKDIR /tmp/build/util/
CC /tmp/build/util/genelf.o
util/genelf.c:22:19: fatal error: dwarf.h: No such file or directory
#include <dwarf.h>
^
compilation terminated.
mv: cannot stat '/tmp/build/util/.genelf.o.tmp': No such file or directory
Because the jitdump code needs the DWARF related development packages to
be installed. So make it dependent on that so that the build can succeed
without jitdump support.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-le498robnmxd40237wej3w62@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When objtool discovers an issue, it's very common for it to flood the
terminal with a lot of duplicate warnings. For example:
warning: objtool: rtlwifi_rate_mapping()+0x2e7: frame pointer state mismatch
warning: objtool: rtlwifi_rate_mapping()+0x2f3: frame pointer state mismatch
warning: objtool: rtlwifi_rate_mapping()+0x2ff: frame pointer state mismatch
warning: objtool: rtlwifi_rate_mapping()+0x30b: frame pointer state mismatch
...
The first warning is usually all you need. Change it to only warn once
per function.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/c47f3ca38aa01e2a9b6601f9e38efd414c3f3c18.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use hash tables for instruction and rela lookups (and keep the linked
lists around for sequential access).
Also cache the section struct for the "__func_stack_frame_non_standard"
section.
With this change, "objtool check net/wireless/nl80211.o" goes from:
real 0m1.168s
user 0m1.163s
sys 0m0.005s
to:
real 0m0.059s
user 0m0.042s
sys 0m0.017s
for a 20x speedup.
With the same object, it should be noted that the memory heap usage grew
from 8MB to 62MB. Reducing the memory usage is on the TODO list.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/dd0d8e1449506cfa7701b4e7ba73577077c44253.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Copy hashtable.h from include/linux/tools.h. It's needed by objtool in
the next patch in the series.
Add some includes that it needs, and remove references to
kernel-specific features like RCU and __read_mostly.
Also change some if its dependency headers' includes to use quotes
instead of brackets so gcc can find them.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/be3bef72f6540d8a510515408119d968a0e18179.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo reported [1] some false positive objtool warnings:
drivers/net/wireless/realtek/rtlwifi/base.o: warning: objtool: rtlwifi_rate_mapping()+0x2e7: frame pointer state mismatch
drivers/net/wireless/realtek/rtlwifi/base.o: warning: objtool: rtlwifi_rate_mapping()+0x2f3: frame pointer state mismatch
...
And so did the 0-day bot [2]:
drivers/gpu/drm/radeon/cik.o: warning: objtool: cik_tiling_mode_table_init()+0x6ce: call without frame pointer save/setup
drivers/gpu/drm/radeon/cik.o: warning: objtool: cik_tiling_mode_table_init()+0x72b: call without frame pointer save/setup
...
Both sets of warnings involve functions which have multiple switch
statements. When there's more than one switch statement in a function,
objtool interprets all the switch jump tables as a single table. If the
targets of one jump table assume a stack frame and the targets of
another one don't, it prints false positive warnings.
Fix the bug by detecting the size of each switch jump table. For
multiple tables, each one ends where the next one begins.
[1] https://lkml.kernel.org/r/20160308103716.GA9618@gmail.com
[2] https://lists.01.org/pipermail/kbuild-all/2016-March/018124.html
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/2d7eecc6bc52d301f494b80f5fd62c2b6c895658.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename some list heads to distinguish them from hash node heads, which
are added later in the patch series.
Also rename the get_*() functions to add_*(), which is more descriptive:
they "add" data to the objtool_file struct.
Also rename rodata_rela and text_rela to be clearer:
- text_rela refers to a rela entry in .rela.text.
- rodata_rela refers to a rela entry in .rela.rodata.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/ee0eca2bba8482aa45758958c5586c00a7b71e62.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The insns list is initialized twice, in cmd_check() and in
decode_instructions(). Remove the latter.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/be6e21d7eec1f072095d22a1cbe144057135e097.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add some helper macros to make it easier to traverse instructions, and
to abstract the details of the instruction list implementation in
preparation for creating a hash structure.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/8e1715d5035bc02b4db28d0fccef6bb1170d1f12.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With some configs [1], objtool prints a bunch of false positive warnings
like:
arch/x86/events/core.o: warning: objtool: x86_del_exclusive()+0x0: frame pointer state mismatch
For some reason this config has a bunch of sibling calls. When objtool
follows a sibling call jump, it attempts to compare the frame pointer
state. But it also accidentally compares the FENTRY state, resulting in
a false positive warning.
[1] https://lkml.kernel.org/r/20160308154909.GA20956@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/382de77ccaaa8cd79b27a155c3d109ebd4ce0219.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I don't _think_ dead_end_function() can get into a recursive loop, but
just in case, stop the loop and print a warning.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/ff489a63e6feb88abb192cfb361d81626dcf3e89.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo reported an infinite loop in objtool with a certain randconfig [1].
With the given config, two functions in crypto/ablkcipher.o contained
sibling calls to each other, which threw the recursive call in
dead_end_function() for a loop (literally!).
Split the noreturn detection into two passes. In the first pass, check
for return instructions. In the second pass, do the potentially
recursive sibling call check. In most cases, the first pass will be
good enough. In the rare case where a second pass is needed, recursion
should hopefully no longer be possible.
[1] https://lkml.kernel.org/r/20160308154909.GA20956@gmail.com
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/16afb602640ef43b7782087d6cca17bf6fc13603.1457502970.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following upcoming upstream commit:
92b0729c34 ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Adds _ASM_EXTABLE_FAULT(), which is not available in user-space
and breaks the build.
We don't really need _ASM_EXTABLE_FAULT() in user-space, so simply
wrap it to nothing.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Several cases of overlapping changes, as well as one instance
(vxlan) of a bug fix in 'net' overlapping with code movement
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-8-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-7-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Use this info to print entries with multiple sort keys in a
single hierarchy properly.
For example, the below example shows using 4 sort keys with 2 levels.
$ perf report --hierarchy -s '{prev_pid,prev_comm},{next_pid,next_comm}' \
--percent-limit 1 -i perf.data.sched
...
# Overhead prev_pid+prev_comm / next_pid+next_comm
# ........... .......................................
#
22.36% 0 swapper/0
9.48% 17773 transmission-gt
5.25% 109 kworker/0:1H
1.53% 6524 Xephyr
21.39% 17773 transmission-gt
9.52% 0 swapper/0
9.04% 0 swapper/2
1.78% 0 swapper/3
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-6-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When multiple sort keys are used in a single hierarchy, it should indent
using number of hierarchy levels instead of number of sort keys.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-5-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This implements having multiple sort keys in a single hierarchy level.
Originally only single sort key is supported for each level, but now
using the group syntax with '{ }', it can set more than one sort key in
one level. Note that now it needs to quote in order to prevent shell
interpretation.
For example:
$ perf report --hierarchy -s '{comm,dso},sym'
...
# Overhead Command / Shared Object / Symbol
# .............. ..........................................
#
48.67% swapper [kernel.vmlinux]
34.42% [k] intel_idle
1.30% [k] __tick_nohz_idle_enter
1.03% [k] cpuidle_reflect
8.87% firefox libpthread-2.22.so
6.60% [.] __GI___libc_recvmsg
1.18% [.] pthread_cond_signal@@GLIBC_2.3.2
1.09% [.] 0x000000000000ff4b
6.11% Xorg libc-2.22.so
5.27% [.] __memcpy_sse2_unaligned
In the above example, the command name and the shared object name are
shown on the same line but the symbol name is on the different line.
Since the first two are grouped by '{}', they are in the same level.
Suggested-and-Tested=by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-4-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now each hists has its own hpp lists in hierarchy. So instead of having
a pointer to a single perf_hpp_fmt in a hist entry, make it point the
hpp_list for its level. This will be used to support multiple sort keys
in a single hierarchy level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-3-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The perf_hpp__setup_hists_formats() is to build hists-specific output
formats (and sort keys). Currently it's only used in order to build the
output format in a hierarchy with same sort keys, but it could be used
with different sort keys in non-hierarchy mode later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-2-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I'm surprised this remained undocumented since at least 2011. And it is
actually a very useful switch, as Steve and I came to realize recently.
Add the text from
2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
which added the incrementing aspect to -d.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2cba3ffb9a ("perf stat: Add -d -d and -d -d -d options to show more CPU events")
Link: http://lkml.kernel.org/r/1457347294-32546-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The level field is to distinguish levels in the hierarchy mode.
Currently each column (perf_hpp_fmt) has a different level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457103582-28396-2-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit b9511cd761 ("perf/x86: Fix time_shift in perf_event_mmap_page")
altered the time conversion algorithms documented in the perf_event.h
header file, to use 64-bit shifts. That was done to make the code more
future-proof (i.e. some time in the future a 32-bit shift could be
allowed). Reflect those changes in perf tools.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move clockid validation into jit_process() so it can later be made
conditional.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for moving clockid validation into jit_process().
Previously a return value of zero meant the processing had been done and
non-zero meant either the processing was not done (i.e. not the jitdump
file mmap event) or an error occurred.
Change it so that zero means the processing was not done, one means the
processing was done and successful, and negative values are an error.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the stubs are identical so just have one function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, when injecting build ids, if there is AUX data then 'perf
inject' hits all DSOs because it is not known which DSOs the trace data
would hit.
That needs to be done for JIT injection also, and in fact there is no
reason to distinguish what kind of injection is being done. That is,
any time there is AUX data and the HEADER_BUID_ID feature flag is set,
and the AUX data is not being processed, then hit all DSOs. This patch
does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457005856-6143-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The return type is not defined, so it defaults to int, however, the
function is not returning anything, so this is clearly not correct. Make
it a void function.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457008214-14393-1-git-send-email-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add the boiler-plate for a 'clear error' command based on section
9.20.7.6 "Function Index 4 - Clear Uncorrectable Error" from the ACPI
6.1 specification, and add a reference implementation in nfit_test.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Simulate platform-firmware-initiated and asynchronous scrub results.
This injects poison in the middle of all nfit_test pmem address ranges.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The nvdimm unit test infrastructure performs its own initialization of
an acpi_nfit_desc to specify test overrides over the native
implementation. Make it clear which attributes and operations it is
overriding by re-using acpi_nfit_init_desc() as a common starting point.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The return value from an 'ndctl_fn' reports the command execution
status, i.e. was the command properly formatted and was it successfully
submitted to the bus provider. The new 'cmd_rc' parameter allows the bus
provider to communicate command specific results, translated into
common error codes.
Convert the ARS commands to this scheme to:
1/ Consolidate status reporting
2/ Prepare for for expanding ars unit test cases
3/ Make the implementation more generic
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ACPI 6.1 clarifies that "The system shall include an NVDIMM Control
Region Structure for every Function Interface in the NVDIMM."
Implement this clarification in nfit_test.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ACPI 6.1 and JEDEC Annex L Release 3 formalize the format interface
code. Add definitions and update their usage in the unit test.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When building with CONFIG_STACK_VALIDATION on a ppc64le host with an x86
cross-compiler, Stephen Rothwell saw the following objtool build errors:
DESCEND objtool
CC /home/sfr/next/x86_64_allmodconfig/tools/objtool/builtin-check.o
CC /home/sfr/next/x86_64_allmodconfig/tools/objtool/special.o
CC /home/sfr/next/x86_64_allmodconfig/tools/objtool/elf.o
CC /home/sfr/next/x86_64_allmodconfig/tools/objtool/objtool.o
MKDIR /home/sfr/next/x86_64_allmodconfig/tools/objtool/arch/x86/insn/
CC /home/sfr/next/x86_64_allmodconfig/tools/objtool/libstring.o
elf.c:22:23: fatal error: sys/types.h: No such file or directory
compilation terminated.
CC /home/sfr/next/x86_64_allmodconfig/tools/objtool/exec-cmd.o
CC /home/sfr/next/x86_64_allmodconfig/tools/objtool/help.o
builtin-check.c:28:20: fatal error: string.h: No such file or directory
compilation terminated.
objtool.c:28:19: fatal error: stdio.h: No such file or directory
compilation terminated.
It fails to build because it tries to compile objtool with the
cross-compiler instead of the host compiler.
Ensure that it always uses the host compiler by ignoring CROSS_COMPILE.
In order to do that properly, the libsubcmd.a library needs to be built
in tools/objtool/ rather than tools/lib/subcmd/. The latter directory
contains the cross-compiled version which is needed for perf and
possibly other tools.
Note that cross-compiling for x86 on a _big_ endian system would result
in a bunch of false positive objtool warnings during the kernel build
because it isn't endian-aware. But that's generally a rare edge case
and there haven't been any reports of anybody needing that.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/55b63eefc347f1bb28573f972d8d1adbf1f1c31d.1456962210.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When running objtool on a ppc64le host to analyze x86 binaries, it
reports a lot of false warnings like:
ipc/compat_mq.o: warning: objtool: compat_SyS_mq_open()+0x91: can't find jump dest instruction at .text+0x3a5
The warnings are caused by the x86 instruction decoder setting the wrong
value for the jump instruction's immediate field because it assumes that
"char == signed char", which isn't true for all architectures. When
converting char to int, gcc sign-extends on x86 but doesn't sign-extend
on ppc64le.
According to the gcc man page, that's a feature, not a bug:
> Each kind of machine has a default for what "char" should be. It is
> either like "unsigned char" by default or like "signed char" by
> default.
>
> Ideally, a portable program should always use "signed char" or
> "unsigned char" when it depends on the signedness of an object.
Conform to the "standards" by changing the "char" casts to "signed
char". This results in no actual changes to the object code on x86.
Note: the x86 decoder now lives in three different locations in the
kernel tree, which are all kept in sync via makefile checks and
warnings: in-kernel, perf, and objtool. This fixes all three locations.
Eventually we should probably try to at least converge the two separate
"tools" locations into a single shared location.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/9dd4161719b20e6def9564646d68bfbe498c549f.1456962210.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add an extra check for frontend stalled in the metrics. This avoids an
extra column for the --metric-only case when the CPU does not support
frontend stalled.
v2: Add separate init function
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1456858672-21594-8-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with gcc 6 we're getting various build warnings that just
require some trivial function declaration and call fixes:
turbostat.c: In function ‘dump_cstate_pstate_config_info’:
turbostat.c:1973:1: warning: type of ‘family’ defaults to ‘int’
dump_cstate_pstate_config_info(family, model)
turbostat.c:1973:1: warning: type of ‘model’ defaults to ‘int’
turbostat.c: In function ‘get_tdp’:
turbostat.c:2145:8: warning: type of ‘model’ defaults to ‘int’
double get_tdp(model)
turbostat.c: In function ‘perf_limit_reasons_probe’:
turbostat.c:2259:6: warning: type of ‘family’ defaults to ‘int’
void perf_limit_reasons_probe(family, model)
turbostat.c:2259:6: warning: type of ‘model’ defaults to ‘int’
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-wbicer8n0s9qe6ql8h9x478e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sa_flags field is not being initialized, so a garbage value is being
passed to sigaction. Initialize it to zero.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456923322-29697-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That got broken by d3a72fd818 ("perf report: Fix indentation of
dynamic entries in hierarchy"), by using the evlist in setup_sorting()
without checking if it is NULL, as done in some 'perf test' entries:
$ find tools/ -name "*.c" | xargs grep 'setup_sorting(NULL);'
tools/perf/tests/hists_output.c: setup_sorting(NULL);
tools/perf/tests/hists_output.c: setup_sorting(NULL);
tools/perf/tests/hists_output.c: setup_sorting(NULL);
tools/perf/tests/hists_output.c: setup_sorting(NULL);
tools/perf/tests/hists_output.c: setup_sorting(NULL);
tools/perf/tests/hists_cumulate.c: setup_sorting(NULL);
tools/perf/tests/hists_cumulate.c: setup_sorting(NULL);
tools/perf/tests/hists_cumulate.c: setup_sorting(NULL);
tools/perf/tests/hists_cumulate.c: setup_sorting(NULL);
$
Fix it.
Before:
[root@jouet ~]# perf test
<SNIP>
15: Test matching and linking multiple hists : FAILED!
16: Try 'import perf' in python, checking link problems : Ok
17: Test breakpoint overflow signal handler : Ok
18: Test breakpoint overflow sampling : Ok
19: Test number of exit event of a simple workload : Ok
20: Test software clock events have valid period values : Ok
21: Test object code reading : Ok
22: Test sample parsing : Ok
23: Test using a dummy software event to keep tracking : Ok
24: Test parsing with no sample_id_all bit set : Ok
25: Test filtering hist entries : FAILED!
26: Test mmap thread lookup : Ok
27: Test thread mg sharing : Ok
28: Test output sorting of hist entries : FAILED!
29: Test cumulation of child hist entries : FAILED!
<SNIP>
After the patch the above failed tests complete successfully.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: d3a72fd818 ("perf report: Fix indentation of dynamic entries in hierarchy")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a long value is read on 32 bit machines for 64 bit output, the
parsing needs to change "%lu" into "%llu", as the value is read
natively.
Unfortunately, if "%llu" is already there, the code will add another "l"
to it and fail to parse it properly.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20160209204237.337024613@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Had a bug where on error of parsing __print_array() where the fields are
freed after they were allocated, but since they were not set to NULL,
the freeing of the arg also tried to free the already freed fields
causing a double free.
Fix process_hex() while at it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20160209204237.188327674@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When rounding to microseconds, if the timestamp subsecond is between
.999999500 and .999999999, it is rounded to .1000000, when it should
instead increment the second counter due to the overflow.
For example, if the timestamp is 1234.999999501 instead of seeing:
1235.000000
we see:
1234.1000000
Signed-off-by: Chaos.Chen <rainboy1215@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20160209204236.824426460@goodmis.org
[ fixed incrementing "secs" instead of decrementing it ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'command_line' variable is free'd twice if db_export__branch_types()
fails. To avoid this, defer the free'ing of 'command_line' to after this
call so that the error return path will just free 'command_line' once.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1456875980-25606-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "man gcc" says .i extension represents the file is C source code
that should not be preprocessed. Here, .s should be used.
For clarification,
.c ---(preprocess)---> .i
.S ---(preprocess)---> .s
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Lukas Wunner <lukas@wunner.de>
Link: http://lkml.kernel.org/r/1454263140-19670-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now support CSV output for metrics. With the new output callbacks this
is relatively straight forward by creating new callbacks.
This allows to easily plot metrics from CSV files.
The new line callback needs to know the number of fields to skip them
correctly
Example output before:
% perf stat -x, true
0.200687,,task-clock,200687,100.00
0,,context-switches,200687,100.00
0,,cpu-migrations,200687,100.00
40,,page-faults,200687,100.00
730871,,cycles,203601,100.00
551056,,stalled-cycles-frontend,203601,100.00
<not supported>,,stalled-cycles-backend,0,100.00
385523,,instructions,203601,100.00
78028,,branches,203601,100.00
3946,,branch-misses,203601,100.00
After:
% perf stat -x, true
.502457,,task-clock,502457,100.00,0.485,CPUs utilized
0,,context-switches,502457,100.00,0.000,K/sec
0,,cpu-migrations,502457,100.00,0.000,K/sec
45,,page-faults,502457,100.00,0.090,M/sec
644692,,cycles,509102,100.00,1.283,GHz
423470,,stalled-cycles-frontend,509102,100.00,65.69,frontend cycles idle
<not supported>,,stalled-cycles-backend,0,100.00,,,,
492701,,instructions,509102,100.00,0.76,insn per cycle
,,,,,0.86,stalled cycles per insn
97767,,branches,509102,100.00,194.578,M/sec
4788,,branch-misses,509102,100.00,4.90,of all branches
or easier readable
$ perf stat -x, -o x.csv true
$ column -s, -t x.csv
0.490635 task-clock 490635 100.00 0.489 CPUs utilized
0 context-switches 490635 100.00 0.000 K/sec
0 cpu-migrations 490635 100.00 0.000 K/sec
45 page-faults 490635 100.00 0.092 M/sec
629080 cycles 497698 100.00 1.282 GHz
409498 stalled-cycles-frontend 497698 100.00 65.09 frontend cycles idle
<not supported> stalled-cycles-backend 0 100.00
491424 instructions 497698 100.00 0.78 insn per cycle
0.83 stalled cycles per insn
97278 branches 497698 100.00 198.270 M/sec
4569 branch-misses 497698 100.00 4.70 of all branches
Two new fields are added: metric value and metric name.
v2: Split out function argument changes
v3: Reenable metrics for real.
v4: Fix wrong hunk from refactoring.
v5: Remove extra "noise" printing (Jiri), but add it to the not counted case.
Print empty metrics for not counted.
v6: Avoid outputting metric on empty format.
v7: Print metric at the end
v8: Remove extra run, ena fields
v9: Avoid extra new line for unsupported counters
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1456785386-19481-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__mmap_ex() can fail without setting errno (for example, fail
in condition checking. In this case all syscall is success).
If this happen, record__open() incorrectly returns 0. Force setting rc
is a quick way to avoid this problem, or we have to follow all possible
code path in perf_evlist__mmap_ex() to make sure there's at least one
system call before returning an error.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-30-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move code for finalizing 'perf.data' to record__finish_output(). It will
be used by following commits to split output to multiple files.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-23-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create record__synthesize(). It can be used to create tracking events
for each perf.data after perf supporting splitting into multiple
outputs.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-20-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commits in a BPF patchkit will extract kernel and module synthesizing
code into a separated function and call it multiple times. This patch
replace 'if (err < 0)' using WARN_ONCE, makes sure the error message
show one time.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-19-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After babeltrace commit 5cec03e402aa ("ir: copy variants and sequences
when setting a field path"), 'perf data convert' gets incorrect result
if there's bpf output data. For example:
# perf data convert --to-ctf ./out.ctf
# babeltrace ./out.ctf
[10:44:31.186045346] (+?.?????????) evt: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF810E7DD1, perf_tid = 23819, perf_pid = 23819, perf_id = 518, raw_len = 3, raw_data = [ [0] = 0xC028E32F, [1] = 0x815D0100, [2] = 0x1000000 ] }
[10:44:31.286101003] (+0.100055657) evt: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF8105B609, perf_tid = 23819, perf_pid = 23819, perf_id = 518, raw_len = 3, raw_data = [ [0] = 0x35D9F1EB, [1] = 0x15D81, [2] = 0x2 ] }
The expected result of the first sample should be:
raw_data = [ [0] = 0x2FE328C0, [1] = 0x15D81, [2] = 0x1 ] }
however, 'perf data convert' output big endian value to resuling CTF
file.
The reason is a internal change (or a bug?) of babeltrace.
Before this patch, at the first add_bpf_output_values(), byte order of
all integer type is uncertain (is 0, neither 1234 (le) nor 4321 (be)).
It would be fixed by:
perf_evlist__deliver_sample
-> process_sample_event
-> ctf_stream
...
->bt_ctf_trace_add_stream_class
->bt_ctf_field_type_structure_set_byte_order
->bt_ctf_field_type_integer_set_byte_order
during creating the stream.
However, the babeltrace commit mentioned above duplicates types in
sequence to prevent potential conflict in following call stack and link
the newly allocated type into the 'raw_data' sequence:
perf_evlist__deliver_sample
-> process_sample_event
-> ctf_stream
...
-> bt_ctf_trace_add_stream_class
-> bt_ctf_stream_class_resolve_types
...
-> bt_ctf_field_type_sequence_copy
->bt_ctf_field_type_integer_copy
This happens before byte order setting, so only the newly allocated
type is initialized, the byte order of original type perf choose to
create the first raw_data is still uncertain.
Byte order in CTF output is not related to byte order in perf.data.
Setting it to anything other than BT_CTF_BYTE_ORDER_NATIVE solves this
problem (only BT_CTF_BYTE_ORDER_NATIVE needs to be fixed). To reduce
behavior changing, set byte order according to compiling options.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo reported regression on display format of big numbers, which is
missing separators (in default perf stat output).
triton:~/tip> perf stat -a sleep 1
...
127008602 cycles # 0.011 GHz
279538533 stalled-cycles-frontend # 220.09% frontend cycles idle
119213269 instructions # 0.94 insn per cycle
This is caused by recent change:
perf stat: Check existence of frontend/backed stalled cycles
that added call to pmu_have_event, that subsequently calls
perf_pmu__parse_scale, which has a bug in locale handling.
The lc string returned from setlocale, that we use to store old locale
value, may be allocated in static storage. Getting a dynamic copy to
make it survive another setlocale call.
$ perf stat ls
...
2,360,602 cycles # 3.080 GHz
2,703,090 instructions # 1.15 insn per cycle
546,031 branches # 712.511 M/sec
Committer note:
Since the patch introducing the regression didn't made to perf/core,
move it to just before where the regression was introduced, so that we
don't break bisection for this feature.
Reported-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160303095348.GA24511@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
virtio_ring currently sends the device (usually a hypervisor)
physical addresses of its I/O buffers. This is okay when DMA
addresses and physical addresses are the same thing, but this isn't
always the case. For example, this never works on Xen guests, and
it is likely to fail if a physical "virtio" device ever ends up
behind an IOMMU or swiotlb.
The immediate use case for me is to enable virtio on Xen guests.
For that to work, we need vring to support DMA address translation
as well as a corresponding change to virtio_pci or to another
driver.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Load up the non volatile FPU and VMX regs and ensure that they are the
expected value in a signal handler
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Loop in assembly checking the registers with many threads.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test that the non volatile floating point and Altivec registers get
correctly preserved across the fork() syscall.
fork() works nicely for this purpose, the registers should be the same for
both parent and child
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Add include guards to basic_asm.h, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
LTO can cause GCC to inline some functions which have attributes set.
The act of inlining the functions can lead to GCC forgetting about the
attributes which leads to incorrect tests.
Notable example being: __attribute__((__target__("no-vsx")))
LTO can also interact strangely with custom assembly functions and cause
tests to intermittently fail.
Both these cases are hard to detect and require manual inspection of
binaries which is unlikely to happen for all tests. Furthermore, LTO
optimisations are not necessary for selftests and correctness is
paramount and as such it is best to disable LTO.
LTO can be enabled on a per test basis.
A pseries_le_defconfig kernel on a POWER8 was used to determine that the
same subset of selftests pass and fail with and without -flto in the
common Makefile.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gcc helpfully points out that we're accessing past the end of the gprs
array:
tm-signal-msr-resv.c: In function 'signal_usr1':
tm-signal-msr-resv.c:43:37: error: array subscript is above array bounds [-Werror=array-bounds]
ucp->uc_mcontext.regs->gpr[PT_MSR] |= (7ULL);
We haven't noticed previously because -flto was hiding it somehow.
The code is confused, PT_MSR isn't a gpr, instead it's in
uc_regs->gregs, so fix it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We want the fixes in here, and others are sending us pull requests based
on this kernel tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently there's a single function that is used to display a record's
data in human readable format. That's pevent_print_event().
Unfortunately, this gives little room for adding other output within the
line without updating that function call.
I've decided to split that function into 3 parts.
pevent_print_event_task() which prints the task comm, pid and the CPU
pevent_print_event_time() which outputs the record's timestamp
pevent_print_event_data() which outputs the rest of the event data.
pevent_print_event() now simply calls these three functions.
To save time from doing the search for event from the record's type, I
created a new helper function called pevent_find_event_by_record(),
which returns the record's event, and this event has to be passed to the
above functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20160229090128.43a56704@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Format fields of a syscall have the first variable '__syscall_nr' or
'nr' that mean the syscall number. But it isn't relevant here so drop
it.
'nr' among fields of syscall was renamed '__syscall_nr'. So add
exception handling to drop '__syscall_nr' and modify the comment for
this excpetion handling.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1456492465-5946-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The util/python-ext-sources file contains source files required to build
the python extension relative to $(srctree)/tools/perf,
Such a file path $(FILE).c is handed over to the python extension build
system, which builds the final object in the
$(PYTHON_EXTBUILD)/tmp/$(FILE).o path.
After the build is done all files from $(PYTHON_EXTBUILD)lib/ are
carried as the result binaries.
Above system fails when we add source file relative to ../lib, which we
do for:
../lib/bitmap.c
../lib/find_bit.c
../lib/hweight.c
../lib/rbtree.c
All above objects will be built like:
$(PYTHON_EXTBUILD)/tmp/../lib/bitmap.c
$(PYTHON_EXTBUILD)/tmp/../lib/find_bit.c
$(PYTHON_EXTBUILD)/tmp/../lib/hweight.c
$(PYTHON_EXTBUILD)/tmp/../lib/rbtree.c
which accidentally happens to be final library path:
$(PYTHON_EXTBUILD)/lib/
Changing setup.py to pass full paths of source files to Extension build
class and thus keep all built objects under $(PYTHON_EXTBUILD)tmp
directory.
Reported-by: Jeff Bastian <jbastian@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lkml.kernel.org/r/20160227201350.GB28494@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This warning triggers if the .so library has already been linked:
triton:~/tip/tools/lib/lockdep> make
CC common.o
CC lockdep.o
CC rbtree.o
LD liblockdep-in.o
LD liblockdep.a
ln: failed to create symbolic link ‘liblockdep.so’: File exists
LD liblockdep.so.4.5.0-rc6
Overwrite the link.
Cc: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add test for AA and 2 threaded ABBA locking.
Rename AA.c to ABA.c since it was implementing an ABA instead of a pure
AA. Now both cases are covered.
The expected output for AA.c is that the process blocks and lockdep
reports a deadlock.
ABBA_2threads.c differs from ABBA.c in that lockdep keeps separate chains
of held locks per task. This can lead to different behaviour regarding
lock detection. The expected output for this test is that the process
blocks and lockdep reports a circular locking dependency.
These tests found a lockdep bug - fixed by the next commit.
Signed-off-by: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1455864533-7536-3-git-send-email-alfredoalvarezernandez@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This was added to the kernel code in <1658d35ead5d> ("list: Use
READ_ONCE() when testing for empty lists").
There's nothing special we need to do about it in userspace.
Signed-off-by: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1455864533-7536-2-git-send-email-alfredoalvarezernandez@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following upstream commit:
4a389810bc ("kernel/locking/lockdep.c: convert hash tables to hlists")
broke the tools/lib/lockdep build. Add trivial RCU wrappers to fix it.
These wrappers should probably be moved into their own header file.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds a host tool named objtool which has a "check" subcommand which
analyzes .o files to ensure the validity of stack metadata. It enforces
a set of rules on asm code and C inline assembly code so that stack
traces can be reliable.
For each function, it recursively follows all possible code paths and
validates the correct frame pointer state at each instruction.
It also follows code paths involving kernel special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements, for
which gcc sometimes uses jump tables.
Here are some of the benefits of validating stack metadata:
a) More reliable stack traces for frame pointer enabled kernels
Frame pointers are used for debugging purposes. They allow runtime
code and debug tools to be able to walk the stack to determine the
chain of function call sites that led to the currently executing
code.
For some architectures, frame pointers are enabled by
CONFIG_FRAME_POINTER. For some other architectures they may be
required by the ABI (sometimes referred to as "backchain pointers").
For C code, gcc automatically generates instructions for setting up
frame pointers when the -fno-omit-frame-pointer option is used.
But for asm code, the frame setup instructions have to be written by
hand, which most people don't do. So the end result is that
CONFIG_FRAME_POINTER is honored for C code but not for most asm code.
For stack traces based on frame pointers to be reliable, all
functions which call other functions must first create a stack frame
and update the frame pointer. If a first function doesn't properly
create a stack frame before calling a second function, the *caller*
of the first function will be skipped on the stack trace.
For example, consider the following example backtrace with frame
pointers enabled:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff8127f568>] seq_read+0x108/0x3e0
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
It correctly shows that the caller of cmdline_proc_show() is
seq_read().
If we remove the frame pointer logic from cmdline_proc_show() by
replacing the frame pointer related instructions with nops, here's
what it looks like instead:
[<ffffffff81812584>] dump_stack+0x4b/0x63
[<ffffffff812d6dc2>] cmdline_proc_show+0x12/0x30
[<ffffffff812cce62>] proc_reg_read+0x42/0x70
[<ffffffff81256197>] __vfs_read+0x37/0x100
[<ffffffff81256b16>] vfs_read+0x86/0x130
[<ffffffff81257898>] SyS_read+0x58/0xd0
[<ffffffff8181c1f2>] entry_SYSCALL_64_fastpath+0x12/0x76
Notice that cmdline_proc_show()'s caller, seq_read(), has been
skipped. Instead the stack trace seems to show that
cmdline_proc_show() was called by proc_reg_read().
The benefit of "objtool check" here is that because it ensures that
*all* functions honor CONFIG_FRAME_POINTER, no functions will ever[*]
be skipped on a stack trace.
[*] unless an interrupt or exception has occurred at the very
beginning of a function before the stack frame has been created,
or at the very end of the function after the stack frame has been
destroyed. This is an inherent limitation of frame pointers.
b) 100% reliable stack traces for DWARF enabled kernels
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
c) Higher live patching compatibility rate
This is not yet implemented. For more details about what is planned,
see tools/objtool/Documentation/stack-validation.txt.
To achieve the validation, "objtool check" enforces the following rules:
1. Each callable function must be annotated as such with the ELF
function type. In asm code, this is typically done using the
ENTRY/ENDPROC macros. If objtool finds a return instruction
outside of a function, it flags an error since that usually indicates
callable code which should be annotated accordingly.
This rule is needed so that objtool can properly identify each
callable function in order to analyze its stack metadata.
2. Conversely, each section of code which is *not* callable should *not*
be annotated as an ELF function. The ENDPROC macro shouldn't be used
in this case.
This rule is needed so that objtool can ignore non-callable code.
Such code doesn't have to follow any of the other rules.
3. Each callable function which calls another function must have the
correct frame pointer logic, if required by CONFIG_FRAME_POINTER or
the architecture's back chain rules. This can by done in asm code
with the FRAME_BEGIN/FRAME_END macros.
This rule ensures that frame pointer based stack traces will work as
designed. If function A doesn't create a stack frame before calling
function B, the _caller_ of function A will be skipped on the stack
trace.
4. Dynamic jumps and jumps to undefined symbols are only allowed if:
a) the jump is part of a switch statement; or
b) the jump matches sibling call semantics and the frame pointer has
the same value it had on function entry.
This rule is needed so that objtool can reliably analyze all of a
function's code paths. If a function jumps to code in another file,
and it's not a sibling call, objtool has no way to follow the jump
because it only analyzes a single file at a time.
5. A callable function may not execute kernel entry/exit instructions.
The only code which needs such instructions is kernel entry code,
which shouldn't be be in callable functions anyway.
This rule is just a sanity check to ensure that callable functions
return normally.
It currently only supports x86_64. I tried to make the code generic so
that support for other architectures can hopefully be plugged in
relatively easily.
On my Lenovo laptop with a i7-4810MQ 4-core/8-thread CPU, building the
kernel with objtool checking every .o file adds about three seconds of
total build time. It hasn't been optimized for performance yet, so
there are probably some opportunities for better build performance.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/f3efb173de43bd067b060de73f856567c0fa1174.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Without this patch BPF map configuration is not applied.
Command like this:
# ./perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:channel.event=evt/ \
usleep 100000
Load BPF files without error, but since map:channel.event=evt is not
applied, bpf-output event not work.
This patch allows 'perf trace' load and run BPF scripts.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__set_filter() tries to set filter to every evsel linked in
the evlist. However, since filters can only be applied to tracepoints,
checking type of evsel before calling perf_evsel__set_filter() would be
better.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch each subcommand calls perf_config() by themself,
reading the default configuration together with subcommand specific
options. If a subcommand doesn't have it own options, it needs to call
'perf_config(perf_default_config, NULL)' to ensure .perfconfig is
loaded.
This patch brings perf_config(perf_default_config, NULL) to the very
start of main(), so subcommands don't need to do it.
After this patch, 'llvm.clang-path' works for 'perf trace'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The column width of dynamic entries is updated when comparing hist
entries. However some unique entries can miss the chance to update. So
move the update to output resort stage to make sure every entry will get
called before display.
To do that, abuse ->sort callback to update the width when the third
argument is NULL. When resorting entries in normal path, it never be
NULL so it should be fine IMHO.
Before:
# Overhead ptr / bytes_req / gfp_flags
# .............. ..........................................
#
37.50% 0xffff8803f7669400
37.50% 448
37.50% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
10.42% 0xffff8803f766be00
8.33% 96
8.33% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
2.08% 512
2.08% GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP <-- here
After:
# Overhead ptr / bytes_req / gfp_flags
# .............. .....................................................
#
37.50% 0xffff8803f7669400
37.50% 448
37.50% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
10.42% 0xffff8803f766be00
8.33% 96
8.33% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
2.08% 512
2.08% GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP_NOMEMALLOC
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dynamic sort key is used it might not show pretty printed output.
This is because the trace output was not set only for the first dynamic
sort key. During hierarchy_insert_entry() it missed to pass the
trace_output to dynamic entries. Also even if it did, only first entry
will have it. Subsequent entries might set it during collapsing stage
but it's not guaranteed.
Before:
$ perf report --hierarchy --stdio -s ptr,bytes_req,gfp_flags -g none
#
# Overhead ptr / bytes_req / gfp_flags
# .............. ..........................................
#
37.50% 0xffff8803f7669400
37.50% 448
37.50% 66080
10.42% 0xffff8803f766be00
8.33% 96
8.33% 66080
2.08% 512
2.08% 67280
After:
#
# Overhead ptr / bytes_req / gfp_flags
# .............. ..........................................
#
37.50% 0xffff8803f7669400
37.50% 448
37.50% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
10.42% 0xffff8803f766be00
8.33% 96
8.33% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
2.08% 512
2.08% GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dynamic entries are right-aligned unlike other entries since it
usually has numeric value. But for the hierarchy mode, left alignment
is more appropriate IMHO. Also trim spaces on the left so that we can
easily identify the hierarchy.
Before:
$ perf report --hierarchy -i perf.data.kmem -s gfp_flags,ptr,bytes_req --stdio -g none
...
#
# Overhead gfp_flags / ptr / bytes_req
# .............. .................................................................................................
#
91.67% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
37.50% 0xffff8803f7669400
37.50% 448
8.33% 0xffff8803f766be00
8.33% 96
4.17% 0xffff8800d156dc00
4.17% 704
After:
# Overhead gfp_flags / ptr / bytes_req
# .............. ....................................
#
91.67% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
37.50% 0xffff8803f7669400
37.50% 448
8.33% 0xffff8803f766be00
8.33% 96
4.17% 0xffff8800d156dc00
4.17% 704
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dynamic entries are used in the hierarchy mode with multiple
events, the output might not be aligned properly. In the hierarchy
mode, the each sort column is indented using total number of sort keys.
So it keeps track of number of sort keys when adding them. However
a dynamic sort key can be added more than once when multiple events have
same field names. This results in unnecessarily long indentation in the
output.
For example perf kmem records following events:
$ perf evlist --trace-fields -i perf.data.kmem
kmem:kmalloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
kmem:kmalloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
kmem:kfree: trace_fields: call_site,ptr
kmem:kmem_cache_alloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
kmem:kmem_cache_alloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
kmem:kmem_cache_free: trace_fields: call_site,ptr
kmem:mm_page_alloc: trace_fields: page,order,gfp_flags,migratetype
kmem:mm_page_free: trace_fields: page,order
As you can see, many field names shared between kmem events. So adding
'ptr' dynamic sort key alone will set nr_sort_keys to 6. And this adds
many unnecessary spaces between columns.
Before:
$ perf report -i perf.data.kmem --hierarchy -s ptr -g none --stdio
...
# Overhead ptr
# ....................... ...................................
#
99.89% 0xffff8803ffb79720
0.06% 0xffff8803d228a000
0.03% 0xffff8803f7678f00
0.00% 0xffff880401dc5280
0.00% 0xffff880406172380
0.00% 0xffff8803ffac3a00
0.00% 0xffff8803ffac1600
After:
# Overhead ptr
# ........ ....................
#
99.89% 0xffff8803ffb79720
0.06% 0xffff8803d228a000
0.03% 0xffff8803f7678f00
0.00% 0xffff880401dc5280
0.00% 0xffff880406172380
0.00% 0xffff8803ffac3a00
0.00% 0xffff8803ffac1600
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hist_entry__cmp() and hist_entry__collapse() are called, they
should check if the dynamic entry is comparing matching hists only.
Otherwise it might access different hists resulting in incorrect output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like the stdio, it should show messages about omitted hierarchy
entries. Please refer the previous commit for more details.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like the stdio, it should show messages about omitted hierarchy entries.
Please refer the previous commit for more details.
As it needs to check an entry is omitted or not multiple times, add the
has_no_entry field in the hist entry.
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous patch introduced __rb_hierarchy_next() function with
various move direction like HMD_FORCE_CHILD but missed to change using
it some place.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the hierarchy mode is used, some entries might be omiited due to a
percent limit or filter. In this case the output hierarchy is different
than other entries. Add an informative message to users about this.
For example, when 4% of percent limit is applied:
Before:
# Overhead Command / Shared Object / Symbol
# .............. ..........................................
#
49.09% swapper
48.67% [kernel.vmlinux]
34.42% [k] intel_idle
11.51% firefox
8.87% libpthread-2.22.so
6.60% [.] __GI___libc_recvmsg
10.49% gnome-shell
4.74% libc-2.22.so
10.08% Xorg
6.11% libc-2.22.so
5.27% [.] __memcpy_sse2_unaligned
6.15% perf
Note that, gnome-shell/libc has no symbols and perf has no dso/symbols.
With that patch the output will look like below:
After:
# Overhead Command / Shared Object / Symbol
# .............. ..........................................
#
49.09% swapper
48.67% [kernel.vmlinux]
34.42% [k] intel_idle
11.51% firefox
8.87% libpthread-2.22.so
6.60% [.] __GI___libc_recvmsg
10.49% gnome-shell
4.74% libc-2.22.so
no entry >= 4.00%
10.08% Xorg
6.11% libc-2.22.so
5.27% [.] __memcpy_sse2_unaligned
6.15% perf
no entry >= 4.00%
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__overhead_width() is to calculate width occupied by the
overhead (and others) columns before the sort columns.
The hist_entry__has_hiearchy_children() is to check whether an entry has
lower entries (children) in the hierarchy to be shown in the output.
This means the children should not be filtered out and above the percent
limit.
These two functions will be used to show information when all children
of an entry is omitted by the percent limit (or filter).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull libnvdimm fixes from Dan Williams:
- Two fixes for compatibility with the ACPI 6.1 specification.
Without these fixes multi-interface DIMMs will fail to be probed, and
address range scrub commands to find memory errors will give results
that the kernel will mis-interpret. For multi-interface DIMMs Linux
will accept either the original 6.0 implementation or 6.1.
For address range scrub we'll only support 6.1 since ACPI formalized
this DSM differently than the original example [1] implemented in
v4.2. The expectation is that production systems will only ever ship
the ACPI 6.1 address range scrub command definition.
- The wider async address range scrub work targeting 4.6 discovered
that the original synchronous implementation in 4.5 is not sizing its
return buffer correctly.
- Arnd caught that my recent fix to the size of the pfn_t flags missed
updating the flags variable used in the pmem driver.
- Toshi found that we mishandle the memremap() return value in
devm_memremap().
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: use 'u64' for pfn flags
devm_memremap: Fix error value when memremap failed
nfit: update address range scrub commands to the acpi 6.1 format
libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing
nfit: fix multi-interface dimm handling, acpi6.1 compatibility
Only IPC selftest is missing the .gitignore file, so add it.
Also step_after_suspend_test is missing in breakpoints selftest
.gitignore file
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
I named the field representing the current user of GPIO line as
"label" but this is too vague and ambiguous. Before anyone gets
confused, rename it to "consumer" and indicate clearly in the
documentation that this is a string set by the user of the line.
Also clean up leftovers in the documentation.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
script_spec_register() called two functions: script_spec__find() and
script_spec__findnew(). But this way script_spec__find() gets called
two times, directly and via script_spec__findnew().
So remove script_spec__findnew() and make script_spec_register() only
call once script_spec__find().
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1456413190-12378-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create the config file in each directory of testcase which need
more kernel configuration than the default defconfig. User could
use these configs with merge_config.sh script:
Enable config for specific testcase:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/xxx/config
Enable configs for all testcases:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/*/config
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit e56d82a116 ("arm64: cpu hotplug: ensure we mask out
CPU_TASKS_FROZEN in notifiers") fixed a long-standing ARM64 bug that
broke single-stepping after a suspend/resume cycle. Add a kernel
selftest to make sure this doesn't regress or affect other platforms.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This test opens user specified Media Device and calls
MEDIA_IOC_DEVICE_INFO ioctl in a loop once every 10
seconds. This test is for detecting errors in device
removal path.
Usage:
sudo ./media_device_test -d /dev/mediaX
While test is running, remove the device and
ensure there are no use after free errors and
other Oops in the dmesg. Enable KaSan kernel
config option for use-after-free error detection.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
After collecting samples for events 'syscalls:', perf-script with python
script doesn't occasionally work generating a segmentation fault.
The reason is that the print fmt is empty and a value of
event->print_fmt.args is NULL, so dereferencing the null pointer results
in a segmentation fault i.e.:
# perf record -e syscalls:*
# perf script -g python
# perf script -s perf-script.py
in trace_begin
syscalls__sys_enter_brk 3 79841.832099154 3777 test.sh syscall_nr=12, brk=0
... (omitted) ...
Segmentation fault (core dumped)
For example, a format of sys_enter_getuid() hasn't
print fmt as below.
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_getuid/format
name: sys_enter_getuid
ID: 188
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int syscall_nr; offset:8; size:4; signed:1;
print fmt: ""
So add exception handling to avoid this problem.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456413179-12331-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 1d55e8ef34 ("perf tools: Introduce opt_event_config nonterminal") I
removed the unconditional "'/' '/'" for pmu events such as
"intel_pt//" but forgot to use opt_event_config where it expected some
event_config, oops. Fix it.
Noticed when trying to use:
# perf record -e intel_pt// -a sleep 1
event syntax error: 'intel_pt//'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 1d55e8ef34 ("perf tools: Introduce opt_event_config nonterminal")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch improves the error message given by jvmti Makefile when the
alternatives command cannot be found. It now suggests the user locates
the root of their Java installation and pass it with JDIR=
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456378056-18812-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to use strbuf there, its just a simple alloc+formatting, which
asprintf does just fine.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6q6cxfhk8c8ypg3tfpo0i2iy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support hierarchy output for perf-top using --hierarchy option.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-19-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the hierarchy mode, hist entries should decay their children too.
Also update hists__delete_entry() to be able to free child entries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-18-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --hierarchy option is to show output in hierarchy mode. It extends
folding/unfolding in the TUI and GTK browsers to support sort items as
well as callchains. Users can toggle the items to see the performance
result at wanted level.
$ perf report --hierarchy --tui
Overhead Command / Shared Object / Symbol
--------------------------------------------------
+ 32.96% gnome-shell
- 15.11% swapper
- 14.97% [kernel.vmlinux]
6.82% [k] intel_idle
0.66% [k] menu_select
0.43% [k] __hrtimer_start_range_ns
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-17-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-16-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement hierarchy mode in TUI. The output is look like stdio but it
also supports to fold/unfold children dynamically.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'C' and 'E' keys are to collapse/expand all hist entries. Update
nr_hierarchy_entries properly in this case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add nr_hierarchy_entries field to keep current number of (unfolded) hist
entries. And the hist_entry->nr_rows carries number of direct children.
But in the hierarchy mode, entry can have grand children and callchains.
So update the number properly using hierarchy_count_rows() when toggling
the folded state (by pressing ENTER key).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hierarchy output mode is to group entries so the existing columns
won't fit to the new output. Treat all sort keys as a single column and
separate headers by "/".
# Overhead Command / Shared Object
# ........... ................................
#
15.11% swapper
14.97% [kernel.vmlinux]
0.09% [libahci]
0.05% [iwlwifi]
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily. It also helps to find
out which component is most costly. The output will look like below:
15.11% swapper
14.97% [kernel.vmlinux]
0.09% [libahci]
0.05% [iwlwifi]
10.29% irq/33-iwlwifi
6.45% [kernel.vmlinux]
1.41% [mac80211]
1.15% [iwldvm]
1.14% [iwlwifi]
0.14% [cfg80211]
4.81% firefox
3.92% libxul.so
0.34% [kernel.vmlinux]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used for hierarchy output mode to indent entries properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In hierarchy mode, a filter can affect periods of entries in upper
hierarchy. So it needs to resort the hists after filter.
For example, let's look at following example:
Overhead Command / Shared Object / Symbol
------------ --------------------------------
30.00% perf
20.00% perf
10.00% main
5.00% pr_debug
5.00% memcpy
10.00% [kernel.vmlinux]
8.00% memset
2.00% cpu_idle
If we apply simbol filter for 'mem' it should look like this
13.00% perf
8.00% [kernel.vmlinux]
8.00% memset
5.00% perf
5.00% memcpy
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__filter_hierarchy() function implements filtering in hierarchy
mode. Now we have hist_entry__filter() so use it for entries in the
hierarchy. It returns 3 kind of values.
A negative value means that it's not filtered by this type. It marks
current entry as filtered tentatively so if a lower level entry removes
the filter it also removes the all parent so that we can find the entry
in the output.
Zero means it's filtered out by this type. A positive value means it's
not filtered so it removes the filter and shows in the output. In these
cases, it moves to next entry since lower level entry won't match by
this type of filter anymore. Thus all children will be filtered or not
together.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist_entry__filter() function is to filter hist entries using sort
key related info. This is needed to support hierarchy mode since each
hist entry will be associated with a hpp fmt which has a sort key. So
each entry should compare to only matching type of filters.
To do that, add the ->se_filter callback field to struct sort_entry.
This callback takes 'type' argument which determines whether it's
matching sort key or not. It returns -1 for non-matching type, 0 for
filtered entry and 1 for not filtered entries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-6-git-send-email-namhyung@kernel.org
[ 'socket' is reserved in sys/socket.h, so replace it with 'sk' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The rb_hierarchy_{next,prev,last} functions are to traverse all hist
entries in a hierarchy. They will be used by various function which
supports hierarchy output.
As the rb_hierarchy_next() is used to traverse the whole hierarchy, it
sometime needs to visit entries regardless of current folding state. So
add enum hierarchy_move_dir and pass it to __rb_hierarchy_next() for
those cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For hierarchical output, each entry must be sorted in their rbtree
(hroot) properly. Add hists__hierarchy_output_resort() to do the job.
Note that those hierarchy entries share the period counts, it'd be
important to update the hists->stats only once (for leaves).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the hierarchical view, entries will be grouped and sorted on the
first key, and then on the second key, and so on. Add the
he->hroot_{in,out} fields to keep the lower level entries. Actually this
can share space, in a union, with callchain's 'sorted_root' since the
hroots are only used by non-leaf entries and callchain is only used by
leaf entries.
It also adds the 'parent_he' and 'depth' fields which can be used by browsers.
This patch only implements collapsing part which creates internal
entries for each sort key. These need to be sorted by output_sort stage
and to be displayed properly in the later patch(es).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'trace', 'srcline' and 'srcfile' sort keys updates hist entry's
field later. With the hierarchy mode, those fields are passed to a
matching entry so it needs to identify the sort keys.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move code printing binray data from trace_event() to utils.c and allows
passing different printer. Further commits will use this logic to print
bpf output event.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456312845-111583-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat call into scnprintf to easily track number of displayed
bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat/strcpy calls into scnprintf to easily track number of
displayed bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat/strcpy calls into scnprintf to easily track number of
displayed bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving strncat/strcpy calls into scnprintf to easily track
number of displayed bytes. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's lck display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's snp display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's lvl display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move meminfo's tlb display function into mem-events.c object, so it
could be reused later from script code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wrap perf_mem_events[].name into perf_mem_events__name() so we could alter the
events name if needed.
This will be handy when changing latency settings for loads event in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if current kernel support available memory events and display the
status within -e list option:
$ perf mem record -e list
ldlat-loads : available
ldlat-stores : available
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No users, nuke them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kfv2wo8xann8t97wdalttcx7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is the only user of this function, just use the strlen() to skip
the prefix.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-blao710l5cd5hmwrhy51ftgq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error happens during alias parsing currently the complete
parsing of all attributes of the PMU is stopped. This is breaks old perf
on a newer kernel that may have not-yet-know alias attributes (such as
.scale or .per-pkg).
Continue when some attribute is unparseable.
This is IMHO a stable candidate and should be backported to older
versions to avoid problems with newer kernels.
v2: Print warnings when something goes wrong.
v3: Change warning to debug output
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org # v3.6+
Link: http://lkml.kernel.org/r/1455749095-18358-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding data_src and weight column definitions, so it's displayed for
related sample types.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-22-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to define extra macros for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding -e option for perf mem record command, to be able to specify
memory event directly.
Get list of available events:
$ perf mem record -e list
ldlat-loads
ldlat-stores
Monitor ldlat-loads:
$ perf mem record -e ldlat-loads true
Committer notes:
Further testing:
# perf mem record -e ldlat-loads true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (10 samples) ]
# perf evlist
cpu/mem-loads,ldlat=30/P
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will ease up configuration of memory events and addition of other
memory events in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The operation '%' is not implemented on event-parse.c, causing an error
when parsing events with '%' the operation in its printk format. For
example,
# perf record -e sched:sched_deadline_yield ~/yield-test
Warning: [sched:sched_deadline_yield] unknown op '%'
....
# perf script
Warning: [sched:sched_deadline_yield] unknown op '%'
test 1641 [006] 3364.109319: sched:sched_deadline_yield: \
[FAILED TO PARSE] now=3364109314595 \
deadline=3364139295135 runtime=19975597
This patch implements the '%' operation. With this patch, we see the
correct output:
# perf record -e sched:sched_deadline_yield ~/yield-test
No Warning
# perf script
yield-test 4005 [001] 4623.650978: sched:sched_deadline_yield: \
now=4623.650974050 \
deadline=4623.680957364 remaining_runtime=19979611
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Link: http://lkml.kernel.org/r/5c96a395c56cea6d3d13d949051bdece86cc26e0.1456157869.git.bristot@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use %2d for the GPIO line number. This should align the results
horziontally for most gpio chips.
The GPIO label uses quotes for real values. For GPIO names this is
currently missing. The patch adds the missing quote.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Conflicts:
drivers/net/phy/bcm7xxx.c
drivers/net/phy/marvell.c
drivers/net/vxlan.c
All three conflicts were cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
One is by Yang Shi who added a READ_ONCE_NOCHECK() to the scan of the
stack made by the stack tracer. As the stack tracer scans the entire
kernel stack, KASAN triggers seeing it as a "stack out of bounds" error.
As the scan is looking at the contents of the stack from parent functions.
The NOCHECK() tells KASAN that this is done on purpose, and is not some
kind of stack overflow.
The second fix is to the ftrace selftests, to retrieve the PID of executed
commands from the shell with "$!" and not by parsing "jobs".
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWyycyAAoJEKKk/i67LK/8ALoH/RkMZ7Cih7vXb30wB13xSNrB
6o4ApuC4YOS9Un/4ruCXb+cGbW2LJLHkEU2ageoHLOZMvwuAM7iQ6fTUW1KxCRP2
ECvqyqi0ZRyoi/CibxVVH9hHEAJzUTwok67nkLeZBqIN9Fglcfd7toAwgcrH3y59
Pybyv5CV2eaff5IKoLXKZJNRLdrVLeM7v4BvdI0dxEikhWZ0XsA0RoIaNfTPqyQJ
F6sJ/njdoMMJK4N8CCPxlvnvEOzn0DnJnfUNUQEj5J3YU9DbAHAACaBSg5oSh9oK
BcFYKV2GIzPku1cafutRRlErcGyB2yqv7bB8Eo86zXRHbeonaj4XGJmH276ldVg=
=srlj
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two more small fixes.
One is by Yang Shi who added a READ_ONCE_NOCHECK() to the scan of the
stack made by the stack tracer. As the stack tracer scans the entire
kernel stack, KASAN triggers seeing it as a "stack out of bounds"
error. As the scan is looking at the contents of the stack from
parent functions. The NOCHECK() tells KASAN that this is done on
purpose, and is not some kind of stack overflow.
The second fix is to the ftrace selftests, to retrieve the PID of
executed commands from the shell with '$!' and not by parsing 'jobs'"
* tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing, kasan: Silence Kasan warning in check_stack of stack_tracer
ftracetest: Fix instance test to use proper shell command for pids
We can already use yylval in the lexer for encoding the BPF extension
number, so that the parser rules can be further reduced to a single one
for each B/H/W case.
Signed-off-by: Ray Bellis <ray@isc.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Users can pass options to tracepoints defined in the BPF script. For
example:
# perf record -e ./test.c/no-inherit/ bash
# dd if=/dev/zero of=/dev/null count=10000
# exit
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data (139 samples) ]
(no-inherit works, only the sys_read issued by bash are captured, at
least 10000 sys_read issued by dd are skipped.)
test.c:
#define SEC(NAME) __attribute__((section(NAME), used))
SEC("func=sys_read")
int bpf_func__sys_read(void *ctx)
{
return 1;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
no-inherit is applied to the kprobe event defined in test.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces basic facilities to support config different slots
in a BPF map one by one.
array.nr_ranges and array.ranges are introduced into 'struct
parse_events_term', where ranges is an array of indices range (start,
length) which will be configured by this config term. nr_ranges is the
size of the array. The array is passed to 'struct bpf_map_priv'. To
indicate the new type of configuration, BPF_MAP_KEY_RANGES is added as a
new key type. bpf_map_config_foreach_key() is extended to iterate over
those indices instead of all possible keys.
Code in this commit will be enabled by following commit which enables
the indices syntax for array configuration.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf__apply_obj_config() is introduced as the core API to apply object
config options to all BPF objects. This patch also does the real work
for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value
stored in map's private field into the BPF map.
This patch is required because we are not always able to set all BPF
config during parsing. Further patch will set events created by perf to
BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until
perf_evsel__open().
bpf_map_foreach_key() is introduced to iterate over each key needs to be
configured. This function would be extended to support more map types
and different key settings.
In perf record, before start recording, call bpf__apply_config() to turn
on all BPF config options.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
# ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
usleep-19000 [006] d... 2394831.057840: : 101
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the final step for BPF map configuration. A new syntax
is appended into parser so user can config BPF objects through '/' '/'
enclosed config terms.
After this patch, following syntax is available:
# perf record -e ./test_bpf_map_1.c/map:channel.value=10/ ...
It would takes effect after appling following commits.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
- Normal case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
- Error case:
# ./perf record -e './test_bpf_map_1.c/map:channel.value/' usleep 10
event syntax error: '..ps:channel:value/'
\___ Config value not set (missing '=')
Hint: Valid config term:
map:[<arraymap>]:value=[value]
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
# ./perf record -e './test_bpf_map_1.c/xmap:channel.value=10/' usleep 10
event syntax error: '..pf_map_1.c/xmap:channel.value=10/'
\___ Invalid object config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:xchannel.value=10/' usleep 10
event syntax error: '..p_1.c/map:xchannel.value=10/'
\___ Target map not exist
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.xvalue=10/' usleep 10
event syntax error: '..ps:channel.xvalue=10/'
\___ Invalid object map config option
[SNIP]
# ./perf record -e './test_bpf_map_1.c/map:channel.value=x10/' usleep 10
event syntax error: '..nnel.value=x10/'
\___ Incorrect value type for map
[SNIP]
Change BPF_MAP_TYPE_ARRAY to '1' in test_bpf_map_1.c:
# ./perf record -e './test_bpf_map_1.c/map:channel.value=10/' usleep 10
event syntax error: '..ps:channel.value=10/'
\___ Can't use this config term to this type of map
Hint: Valid config term:
map:[<arraymap>].value=[value]
(add -v to see detail)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[for parser part]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf__config_obj() is introduced as a core API to config BPF object after
loading. One configuration option of maps is introduced. After this
patch BPF object can accept assignments like:
map:my_map.value=1234
(map.my_map.value looks pretty. However, there's a small but hard to fix
problem related to flex's greedy matching. Please see [1]. Choose ':'
to avoid it in a simpler way.)
This patch is more complex than the work it does because the
consideration of extension. In designing BPF map configuration, the
following things should be considered:
1. Array indices selection: perf should allow user setting different
value for different slots in an array, with syntax like:
map:my_map.value[0,3...6]=1234;
2. A map should be set by different config terms, each for a part
of it. For example, set each slot to the pid of a thread;
3. Type of value: integer is not the only valid value type. A perf
counter can also be put into a map after commit 35578d7984
("bpf: Implement function bpf_perf_event_read() that get the
selected hardware PMU counter")
4. For a hash table, it should be possible to use a string or other
value as a key;
5. It is possible that map configuration is unable to be setup
during parsing. A perf counter is an example.
Therefore, this patch does the following:
1. Instead of updating map element during parsing, this patch stores
map config options in 'struct bpf_map_priv'. Following patches
will apply those configs at an appropriate time;
2. Link map operations in a list so a map can have multiple config
terms attached, so different parts can be configured separately;
3. Make 'struct bpf_map_priv' extensible so that the following patches
can add new types of keys and operations;
4. Use bpf_obj_config__map_funcs array to support more map config options.
Since the patch changing the event parser to parse BPF object config is
relative large, I've put it in another commit. Code in this patch can be
tested after applying the next patch.
[1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dynamic entry is created for each field in a tracepoint event.
Since they have no fixed hpp format index, it should skip when
perf_hpp__reset_width() is called.
This caused following assertion failure..
$ perf record -e sched:sched_switch -a sleep 1
$ perf report -s comm,next_pid --stdio
perf: ui/hist.c:651: perf_hpp__reset_width:
Assertion `!(fmt->idx >= PERF_HPP__MAX_INDEX)' failed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It missed to update column length of the 'trace' sort key in the
hists__calc_col_len() so it might truncate the output. It calculated
the column length in the ->cmp() callback originally but it doesn't
guarantee it's called always.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The srcline, srcfile and trace sort keys can have long entries. With
commit 89fee70943 ("perf hists: Do column alignment on the format
iterator"), it now aligns output with hist_entry__snprintf_alignment().
So each (possibly long) sort entries don't need to do it themselves.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1456101153-14519-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally the hist entry's srcline and/or srcfile is set during sorting.
However sometime it's possible to a hist entry's srcline is not set yet
after the sorting. This is because the entry is so unique and other
sort keys already make it distinct. Then the srcline/file sort didn't
have a chance to be called during the sorting. In that case it has NULL
srcline/srcfile field and shows nothing.
Before:
$ perf report -s comm,sym,srcline
...
Overhead Command Symbol
-----------------------------------------------------------------
34.42% swapper [k] intel_idle intel_idle.c:0
2.44% perf [.] __poll_nocancel (null)
1.70% gnome-shell [k] fw_domains_get (null)
1.04% Xorg [k] sock_poll (null)
After:
34.42% swapper [k] intel_idle intel_idle.c:0
2.44% perf [.] __poll_nocancel .:0
1.70% gnome-shell [k] fw_domains_get fw_domains_get+42
1.04% Xorg [k] sock_poll socket.c:0
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1456101111-14400-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A dynamic entry is created for each tracepoint event. When it sets up
the sort key, it checks with existing keys using ->equal() callback.
But it missed to set the ->equal for dynamic entries. The following
segfault was due to the missing ->equal() callback.
(gdb) bt
#0 0x0000000000140003 in ?? ()
#1 0x0000000000537769 in fmt_equal (b=0x2106980, a=0x21067a0) at ui/hist.c:548
#2 perf_hpp__setup_output_field (list=0x8c6d80 <perf_hpp_list>) at ui/hist.c:560
#3 0x00000000004e927e in setup_sorting (evlist=<optimized out>) at util/sort.c:2642
#4 0x000000000043cf50 in cmd_report (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>)
at builtin-report.c:932
#5 0x00000000004865a1 in run_builtin (p=p@entry=0x8bbce0 <commands+192>, argc=argc@entry=7,
argv=argv@entry=0x7ffd24d56ce0) at perf.c:390
#6 0x000000000042dc1f in handle_internal_command (argv=0x7ffd24d56ce0, argc=7) at perf.c:451
#7 run_argv (argv=0x7ffd24d56a70, argcp=0x7ffd24d56a7c) at perf.c:495
#8 main (argc=7, argv=0x7ffd24d56ce0) at perf.c:620
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older compilers don't like this, for instance, on RHEL6.7:
CC /tmp/build/perf/util/parse-events.o
util/parse-events.c:844: error: redefinition of typedef ‘config_term_func_t’
util/parse-events.c:353: note: previous declaration of ‘config_term_func_t’ was here
So remove the second definition, that should've been just moved in 43d0b97817
("perf tools: Enable config and setting names for legacy cache events"), not copied.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b97817 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In RHEL 6.7:
CC /tmp/build/perf/util/parse-events.o
cc1: warnings being treated as errors
util/parse-events.c: In function ‘parse_events_add_cache’:
util/parse-events.c:366: error: declaration of ‘error’ shadows a global declaration
util/util.h:136: error: shadowed declaration is here
Rename it to 'err'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 43d0b97817 ("perf tools: Enable config and setting names for legacy cache events")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is mainly testing bitmap construction and conversion to/from u32[]
for now.
Tested:
qemu i386, x86_64, ppc, ppc64 BE and LE, ARM.
Signed-off-by: David Decotigny <decot@googlers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the output length specified in the command to size the receive
buffer rather than the arbitrary 4K limit.
This bug was hiding the fact that the ndctl implementation of
ndctl_bus_cmd_new_ars_status() was not specifying an output buffer size.
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If it returns an error, warn user and bail out instead of silently
ignoring it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently hists__collapse_resort() and hists__collapse_insert_entry()
don't return an error code. Now that callchain_merge() can check for
errors, abort and pass the error to the user. A later patch can add
more work which also can fail.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now it can check the error case, so check and pass it to the caller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now create_child() and add_child() return errors so check and pass it
to the caller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The append_chain() might return either result of match_chain() or other
(error) code. But match_chain() can return any value in s64 type so
it's hard to check the error case. Add new enum match_result and make
match_chain() return non-negative values only so that we can check the
error cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Memory allocation in the fill_node() can fail so change its return type
to int and check it in add_child() too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The create_child() in add_child() can return NULL in case of memory
allocation failure. So check the return value and bail out. The proper
error handling will be added later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1455631723-17345-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf top --tui' decrements percentage of all entries on any
key press. This is because it adds total period as new samples are
added to hists. As perf-top does it currently but added samples are not
passed to the display thread, the percentages are decresing
continuously.
So separate total period stat into a different variable so that it
cannot affect the output total period. This new total period stats are
used only for calcualating callchain percent limit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0f58474ec8 ("perf hists: Update hists' total period when adding entries")
Link: http://lkml.kernel.org/r/1455631723-17345-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove duplicated code that differs only in using the matching
'/a,b,c/' part or NULL if no event configuration is done ('//' or no
pair of slashes at all).
Will be used by some new targets allowing the configuration of hardware
events, etc.
Lifted part of the 'opt_event_config' nonterminal from a patch by Wang
Nan.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-e3xzpx9cqsmwnaguaxyw6r42@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commits will make more events obey /name=newname/ options.
This patch makes pmu_event_name() a generic helper.
Makes new get_config_name() accept NULL input to make life easier.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf stat' accepts some config terms but doesn't apply them. For
example:
# perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
# ls
# exit
Performance counter stats for 'bash':
266258061 instructions/no-inherit/
266258061 instructions/inherit/
1.402183915 seconds time elapsed
The result is confusing, because user may expect the first
'instructions' event exclude the 'ls' command.
This patch forbid most of these config terms for 'perf stat'.
Result:
# ./perf stat -e 'instructions/no-inherit/' -e 'instructions/inherit/' bash
event syntax error: 'instructions/no-inherit/'
\___ 'no-inherit' is not usable in 'perf stat'
...
We can add blocked config terms back when 'perf stat' really supports them.
This patch also removes unavailable config term from error message:
# ./perf stat -e 'instructions/badterm/' ls
event syntax error: 'instructions/badterm/'
\___ unknown term
valid terms: config,config1,config2,name
# ./perf stat -e 'cpu/badterm/' ls
event syntax error: 'cpu/badterm/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
config_term_names[] is introduced for future commits which will be able
to retrieve the config name through the config term.
Utilize this array in parse_events_formats_error_string() so the missing
'{,no-}inherit' terms are added.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to man pages, asprintf returns -1 when failure. This patch
fixes two incorrect return value checker.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Cc: stable@vger.kernel.org # v4.4+
Fixes: ffeb883e56 ("perf tools: Show proper error message for wrong terms of hw/sw events")
Link: http://lkml.kernel.org/r/1455882283-79592-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The name of bpf_prog_priv__clear() doesn't follow perf's naming
convention. bpf_prog_priv__delete() seems to be a better name. However,
bpf_prog_priv__delete() should be a method of 'struct bpf_prog_priv',
but its first parameter is 'struct bpf_program'.
It is callback from libbpf to clear priv structures when destroying a
bpf program. It is actually a method of bpf_program (libbpf object), but
bpf_program__ functions should be provided by libbpf.
This patch removes the prefix of that function.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1455882283-79592-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo pointed out that the earlier cb110f4710 ("perf stat: Move
noise/running printing into printout") change changed behavior for not
counted counters. This patch fixes it again.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: cb110f4710 ("perf stat: Move noise/running printing into printout")
Link: http://lkml.kernel.org/r/1455749045-18098-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using 4 kHz is not necessary and sometimes is more than what was
auto-tuned:
# dmesg | grep max_sample_rate | tail -2
[ 2499.144373] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 3592.413606] perf interrupt took too long (5069 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
Simulating a auto-tune of 2000 we make the test fail, as reported
by Steven Noonan for one of his machines, so reduce it to 500 HZ,
it is enough to get a good number of samples for this test:
# perf test -v 21 2>&1 | grep '^Reading object code for memory address' | tee /tmp/out | tail -5
Reading object code for memory address: 0x479f40
Reading object code for memory address: 0x7f29b7eea80d
Reading object code for memory address: 0x7f29b7eea80d
Reading object code for memory address: 0x7f29b7eea800
Reading object code for memory address: 0xffffffff813b2f23
[root@jouet ~]# wc -l /tmp/out
40 /tmp/out
[root@jouet ~]#
For systems that auto-tune below that, the previous patches will tell the
user what is happening so that he may either ignore the result of this test or
bump /proc/sys/kernel/perf_event_max_sample_rate.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6kufyy1iprdfzrbtuqgxir70@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test -v "code reading" 2>&1 | tail -4
perf_evlist__open failed
test child finished with -1
---- end ----
Test object code reading: FAILED!
#
After:
# perf test -v "code reading" 2>&1 | tail -7
perf_evlist__open() failed!
Error: Invalid argument.
Hint: Check /proc/sys/kernel/perf_event_max_sample_rate.
Hint: The current value is 1000 and 4000 is being requested.
test child finished with -1
---- end ----
Test object code reading: FAILED!
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ifbx7vmrc38loe6317owz2jx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running the "code reading" test we get:
# perf test -v "code reading" 2>&1 | tail -5
Parsing event 'cycles:u'
perf_evlist__open failed
test child finished with -1
---- end ----
Test object code reading: FAILED!
#
And with -vv we get the errno value, -22, i.e. -EINVAL, but we can do
better and handle the case at hand, with this patch it becomes:
# perf test -v "code reading" 2>&1 | tail -7
perf_evlist__open() failed!
Error: Invalid argument.
Hint: Check /proc/sys/kernel/perf_event_max_sample_rate.
Hint: The current value is 1000 and 4000 is being requested.
test child finished with -1
---- end ----
Test object code reading: FAILED!
#
Next patch will make this 'perf test' entry to use perf_evlist__strerror()
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i31ai6kfefn75eapejjokfhc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ftracetest instance test used parsing of the "jobs" output to find the
pid of the subshell that is executed previously. But this is not portable to
all major shells that may run these tests. The proper way to get the pid of
the subshell is the shell command "$!". This will return the pid of the
previously executed command. Use that instead, otherwise the test does not
work in all environments.
Link: http://lkml.kernel.org/r/20151211143617.65f4d7a1@gandalf.local.home
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds a GPIO line ABI for getting name, label and a few select
flags from the kernel.
This hides the kernel internals and only tells userspace what it
may need to know: the different in-kernel consumers are masked
behind the flag "kernel" and that is all userspace needs to know.
However electric characteristics like active low, open drain etc
are reflected to userspace, as this is important information.
We provide information on all lines on all chips, later on we will
likely add a flag for the chardev consumer so we can filter and
display only the lines userspace actually uses in e.g. lsgpio,
but then we first need an ABI for userspace to grab and use
(get/set/select direction) a GPIO line.
Sample output from "lsgpio" on ux500:
GPIO chip: gpiochip7, "8011e000.gpio", 32 GPIO lines
line 0: unnamed unlabeled
line 1: unnamed unlabeled
(...)
line 25: unnamed "SFH7741 Proximity Sensor" [kernel output open-drain]
line 26: unnamed unlabeled
(...)
Tested-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The gpio_chip label is useful for userspace to understand what
kind of GPIO chip it is dealing with. Let's store a copy of this
label in the gpio_device, add it to the struct passed to userspace
for GPIO_GET_CHIPINFO_IOCTL and modify lsgpio to show it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow user to easily switch all events to user or kernel space with simple
--all-user or --all-kernel options.
This will be handy within perf mem/c2c wrappers to switch easily monitoring
modes.
Committer note:
Testing it:
# perf record --all-kernel --all-user -a sleep 2
Error: option `all-user' cannot be used with all-kernel
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-user Configure all used events to run in user space.
--all-kernel Configure all used events to run in kernel space.
# perf record --all-user --all-kernel -a sleep 2
Error: option `all-kernel' cannot be used with all-user
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-kernel Configure all used events to run in kernel space.
--all-user Configure all used events to run in user space.
# perf record --all-user -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.416 MB perf.data (162 samples) ]
# perf report | grep '\[k\]'
# perf record --all-kernel -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.423 MB perf.data (296 samples) ]
# perf report | grep '\[\.\]'
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-2-git-send-email-jolsa@kernel.org
[ Made those options to be mutually exclusive ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were dropping the reference we possibly held but not obtaining one
for the new maps, which we will drop at perf_evlist__delete(), fix it.
This was caught by Steven Noonan in some of the machines which would
produce this output when caught by glibc debug mechanisms:
$ sudo perf test 21
21: Test object code reading :***
Error in `perf': corrupted double-linked list: 0x00000000023ffcd0 ***
======= Backtrace: =========
/usr/lib/libc.so.6(+0x72055)[0x7f25be0f3055]
/usr/lib/libc.so.6(+0x779b6)[0x7f25be0f89b6]
/usr/lib/libc.so.6(+0x7a0ed)[0x7f25be0fb0ed]
/usr/lib/libc.so.6(__libc_calloc+0xba)[0x7f25be0fceda]
perf(parse_events_lex_init_extra+0x38)[0x4cfff8]
perf(parse_events+0x55)[0x4a0615]
perf(perf_evlist__config+0xcf)[0x4eeb2f]
perf[0x479f82]
perf(test__code_reading+0x1e)[0x47ad4e]
perf(cmd_test+0x5dd)[0x46452d]
perf[0x47f4e3]
perf(main+0x603)[0x42c723]
/usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f25be0a1610]
perf(_start+0x29)[0x42c859]
Further investigation using valgrind led to the reference count imbalance fixed
in this patch.
Reported-and-Tested-by: Steven Noonan <steven@uplinklabs.net>
Report-Link: http://lkml.kernel.org/r/CAKbGBLjC2Dx5vshxyGmQkcD+VwiAQLbHoXA9i7kvRB2-2opHZQ@mail.gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: f30a79b012 ("perf tools: Add reference counting for cpu_map object")
Link: http://lkml.kernel.org/n/tip-j0u1bdhr47sa511sgg76kb8h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This catches a regression from the compat syscall rework. The
32-bit variant of this test currently fails. The issue is that, for
a 32-bit tracer and a 32-bit tracee, GETREGS+SETREGS with no changes
should be a no-op. It currently isn't a no-op if RAX indicates
signal restart, because the high bits get cleared and the kernel
loses track of the restart state.
Reported-by: Robert O'Callahan <robert@ocallahan.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c4040b40b5b4a37ed31375a69b683f753ec6788a.1455142412.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I had some obvious typos.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert O'Callahan <robert@ocallahan.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e5e6772d4802986cf7df702e646fa24ac14f2204.1455142412.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This tests the two ABI-preserving cases that DOSEMU cares about, and
it also explicitly tests the new UC_SIGCONTEXT_SS and
UC_STRICT_RESTORE_SS flags.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f3d08f98541d0bd3030ceb35e05e21f59e30232c.1455664054.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a second attempt to make the improvements from c6f2062935
("x86/signal/64: Fix SS handling for signals delivered to 64-bit
programs"), which was reverted by 51adbfbba5c6 ("x86/signal/64: Add
support for SS in the 64-bit signal context").
This adds two new uc_flags flags. UC_SIGCONTEXT_SS will be set for
all 64-bit signals (including x32). It indicates that the saved SS
field is valid and that the kernel supports the new behavior.
The goal is to fix a problems with signal handling in 64-bit tasks:
SS wasn't saved in the 64-bit signal context, making it awkward to
determine what SS was at the time of signal delivery and making it
impossible to return to a non-flat SS (as calling sigreturn clobbers
SS).
This also made it extremely difficult for 64-bit tasks to return to
fully-defined 16-bit contexts, because only the kernel can easily do
espfix64, but sigreturn was unable to set a non-flag SS:ESP.
(DOSEMU has a monstrous hack to partially work around this
limitation.)
If we could go back in time, the correct fix would be to make 64-bit
signals work just like 32-bit signals with respect to SS: save it
in signal context, reset it when delivering a signal, and restore
it in sigreturn.
Unfortunately, doing that (as I tried originally) breaks DOSEMU:
DOSEMU wouldn't reset the signal context's SS when clearing the LDT
and changing the saved CS to 64-bit mode, since it predates the SS
context field existing in the first place.
This patch is a bit more complicated, and it tries to balance a
bunch of goals. It makes most cases of changing ucontext->ss during
signal handling work as expected.
I do this by special-casing the interesting case. On sigreturn,
ucontext->ss will be honored by default, unless the ucontext was
created from scratch by an old program and had a 64-bit CS
(unfortunately, CRIU can do this) or was the result of changing a
32-bit signal context to 64-bit without resetting SS (as DOSEMU
does).
For the benefit of new 64-bit software that uses segmentation (new
versions of DOSEMU might), the new behavior can be detected with a
new ucontext flag UC_SIGCONTEXT_SS.
To avoid compilation issues, __pad0 is left as an alias for ss in
ucontext.
The nitty-gritty details are documented in the header file.
This patch also re-enables the sigreturn_64 and ldt_gdt_64 selftests,
as the kernel change allows both of them to pass.
Tested-by: Stas Sergeev <stsp@list.ru>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/749149cbfc3e75cd7fcdad69a854b399d792cc6f.1455664054.git.luto@kernel.org
[ Small readability edit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
for debugging, dump a few more fields:
CPUID(1): SSE3 MONITOR EIST TM2 TSC MSR ACPI-TM TM
cpu0: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MONITOR)
Signed-off-by: Len Brown <len.brown@intel.com>
Move the running/noise printing into printout to avoid duplicated code
in the callers.
v2: Merged with other patches. Remove unnecessary hunk.
Readd hunk that ended in earlier patch.
v3: Fix noise/running output in CSV mode
v4: Merge with later patch that also moves not supported printing.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1454173616-17710-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can modify the metrics printout functions easily, it's
straight forward to support metric printing for interval mode. All that
is needed is to print the time stamp on every new line. Pass the prefix
into the context and print it out.
v2: Move wrong hunk to here.
Committer note:
Before:
[root@jouet ~]# perf stat -I 1000 -e instructions,cycles sleep 1
# time counts unit events
1.000168216 538,913 instructions
1.000168216 748,765 cycles
1.000660048 153,741 instructions
1.000660048 214,066 cycles
After:
# perf stat -I 1000 -e instructions,cycles sleep 1
# time counts unit events
1.000215928 519,620 instructions # 0.69 insn per cycle
1.000215928 752,003 cycles
1.000946033 148,502 instructions # 0.33 insn per cycle
1.000946033 160,104 cycles
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1454173616-17710-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Abstract the printing of shadow metrics. Instead of every metric calling
fprintf directly and taking care of indentation, use two call backs: one
to print metrics and another to start a new line.
This will allow adding metrics to CSV mode and also using them for other
purposes.
The computation of padding is now done in the central callback, instead
of every metric doing it manually. This makes it easier to add new
metrics.
v2: Refactor functions, printout now does more. Move
shadow printing. Improve fallback callbacks. Don't
use void * callback data.
v3: Remove unnecessary hunk. Add typedef for new_line
v4: Remove unnecessary hunk. Don't print metrics for CSV/interval
mode yet. Move printout change to separate patch.
v5: Fix bisect bugs. Avoid bogus frontend cycles printing.
Fix indentation in different aggregation modes.
v6: Delay newline handling
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1454173616-17710-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting libapi debug output functions to use perf functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1455465826-8426-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adhering to the naming convention used when va_args is in a printf like
function, e.g. stdio.h.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b5l3wt77ct28dcnriguxtvn6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding sysfs__read_str function to ease up reading string files from
sysfs. New interface is:
int sysfs__read_str(const char *entry, char **buf, size_t *sizep);
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1455465826-8426-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already moved similar functions in here, also it'll be useful for
sysfs__read_str addition in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1455465826-8426-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support for warning/info/debug output within libapi code. Adding
following macros:
pr_warning(fmt, ...)
pr_info(fmt, ...)
pr_debug(fmt, ...)
Also adding libapi_set_print function to set above functions. This will
be used in perf to set standard debug handlers for libapi.
Adding 2 header files:
debug.h
- to be used outside libapi, contains
libapi_set_print interface
debug-internal.h
- to be used within libapi, contains
pr_warning/pr_info/pr_debug definitions
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1455465826-8426-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the jvmti makefile to check if the
/usr/sbin/java-update-alternatives utility is present. If so, then use
it, if not then use the altenatives command.
This helps handle the difference between Ubuntu and Fedora Linux
distributions.
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1455604661-9357-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
may brick machines. We use a whitelist of known-safe variables to
allow things like installing distributions to work out of the box, and
instead restrict vendor-specific variable deletion by making
non-whitelist variables immutable - Peter Jones
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJWvbEYAAoJEC84WcCNIz1VatYP/1kkly4lIuSYmaQrvF9V/L75
lYNHjEURT55EDq4VAHH/wey3SbDkwy3wBsmfkkJTV1zhA+SHSAG2k097xGyLP6Xr
X+htIj//HH7U3SRWk66UiwkY/866sXCqVRN2vvjBxvP9Z/rTDKe7zRQdVVdCt80P
88H/1Nxy1S8eDExMGCvq8TbtWCSKV6P8197rUqUMf37Sbqr7yBM/sYDitdwOiGTW
gzLwJjWJgDsKw+BWaj5NNZzVAb1Dgof5oEL5WGCU7gJSis08i4cHoRiwutYk2g8f
ZbMnKvlFmiHGbjriowyNPm+pgRVDbS8JvJtORA1qXuVJFPtqV7Wdvdh+jJpdYXLp
bO8EB/yfc7PTH8ScbNbIcgmCknsItRh2SDNXxM/BY/dzaSkzVI/Wr6GauWKInQJ6
IypOMijITmnJ5Sij0V4aMUTZWS5btZt15iqAg3xUqWT9DJ61bIER+eGEhV6hx+7S
pSydQylbaVFpyswdCpJRsfxHfW5j0G9BxnKZGTh+LHeb6dXaughUq2EIdUNHWyEZ
3geJPC3Mh50MngO8phIq+DzjA4K84JZ9j6M3O27+x3bfLAqiktZS6HiaTSmSGNyM
95swhpyHREeLQqYUUTOWiz1rlQ9cW+Bmkhy7Wn3RBZ033YNtmpyoZup0432mwkMm
Wur3Jxd0GFz7zUkqvN3O
=F4YT
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
* Prevent accidental deletion of EFI variables through efivarfs that
may brick machines. We use a whitelist of known-safe variables to
allow things like installing distributions to work out of the box, and
instead restrict vendor-specific variable deletion by making
non-whitelist variables immutable (Peter Jones)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fixing the following problems, for instance, on RHEL6.7:
CC /tmp/build/perf/tests/bp_signal.o
cc1: warnings being treated as errors
tests/bp_signal.c: In function ‘__event’:
tests/bp_signal.c:106: error: declaration of ‘signal’ shadows a global declaration
/usr/include/signal.h:101: error: shadowed declaration is here
tests/bp_signal.c: In function ‘bp_event’:
tests/bp_signal.c:144: error: declaration of ‘signal’ shadows a global declaration
/usr/include/signal.h:101: error: shadowed declaration is here
tests/bp_signal.c: In function ‘wp_event’:
tests/bp_signal.c:149: error: declaration of ‘signal’ shadows a global declaration
/usr/include/signal.h:101: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/tests/.bp_signal.o.tmp': No such file or directory
make[3]: *** [/tmp/build/perf/tests/bp_signal.o] Error 1
make[2]: *** [tests] Error 2
make[1]: *** [/tmp/build/perf/perf-in.o] Error 2
make[1]: *** Waiting for unfinished jobs....
Reported-by: Vinson Lee <vlee@freedesktop.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Fixes: 8fd34e1cce ("perf test: Improve bp_signal")
Link: http://lkml.kernel.org/n/tip-wlpx6tik1b0jirlkw64bv400@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix spelling typos found in printk and Kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A new patch in libbabeltrace [1] reveals a object leak problem in
'perf data' CTF support: perf code never releases the event_class
which is allocated in add_event() and stored in evsel's private field.
If libbabeltrace has the above patch applied, leaking event_class
prevents the writer from being destroyed and flushing metadata. For
example:
$ perf record ls
perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data (12 samples) ]
$ perf data convert --to-ctf ./out.ctf
[ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
[ perf data convert: Converted and wrote 0.000 MB (12 samples) ]
$ cat ./out.ctf/metadata
$ ls -l ./out.ctf/metadata
-rw-r----- 1 w00229757 mm 0 Jan 27 10:49 ./out.ctf/metadata
The correct result should be:
...
$ cat ./out.ctf/metadata
/* CTF 1.8 */
trace {
[SNIP]
$ ls -l ./out.ctf/metadata
-rw-r----- 1 w00229757 mm 2446 Jan 27 10:52 ./out.ctf/metadata
The full story is:
Patch [1] of babeltrace redesigns its reference counting scheme. In that
patch:
* writer <- trace (bt_ctf_writer_create)
* trace <- stream_class (bt_ctf_trace_add_stream_class)
* stream_class <- event_class (bt_ctf_stream_class_add_event_class)
('<-' means 'is a parent of')
Holding of event_class causes reference count of corresponding 'writer'
to increase through parent chain. Perf expects that 'writer' is released
(so metadata is flushed) through bt_ctf_writer_put() in
ctf_writer__cleanup(). However, since it never releases event_class, the
reference of 'writer' won't be dropped, so bt_ctf_writer_put() won't
lead to the release of writer.
Before this CTF patch, !(writer <- trace). Even with event_class leaking,
the writer ends up being released.
[1] e6a8e8e474
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454680939-24963-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To follow convention used in other tools/perf/ areas. Also remove the
need to check if it is NULL before calling the destructor, again, to
follow convention that goes back to free().
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-w6owu7rb8a46gvunlinxaqwx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing a leak, since code calling parse_events__free_terms() expect it
to free the list_head too.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
[ Spun off from another patch ]
Link: http://lkml.kernel.org/r/1454680939-24963-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In these two cases, a 'perf test' entry and in the PMU code the
list_head is on the stack, so we can't use perf_event__free_terms()
(soon to be renamed to perf_event_terms__delete()), because it will
free the list_head as well.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-i956ryjhz97gnnqe8iqe7m7s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Purges 'struct parse_event_term' entries from a list_head.
Some users need this because they don't allocate space for the list
head, it maybe on the stack or embedded into some other struct.
Next patch will convert users that need just purging and then the
perf_events__free_terms() routine will free the list head as well,
finally being renamed to perf_events_terms__delete().
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-4w3zl4ifcl0ed0j4bu3tckqp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just freeing them, better unlink and init its nodes to catch
bugs faster if we keep dangling references to them.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
[ Spun off from another patch, use list_del_init() instead of list_del() ]
Link: http://lkml.kernel.org/r/1454680939-24963-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.
This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.
This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.
Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.
In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4j67nvlfwbnkg85b969ewnkr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To print syscall names, the audit-libs-python package is required.. If
not installed, it prints this error string:
# perf script syscall-counts
Install the audit-libs-python package to get syscall names.
But the package name is different in Ubuntu, mention that in the error
message, similar to a error message of util/trace-event-scripting.c:
# perf script syscall-counts
Install the audit-libs-python package to get syscall names.
For example:
# apt-get install python-audit (Ubuntu)
# yum install audit-libs-python (Fedora)
etc.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1455018790-13425-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To compile for little-endian systems, you need to pass -EL to CC and LD.
EXTRA_CFLAGS works to pass -EL to CC.
Add EXTRA_LDFLAGS to pass -EL to LD.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1455024818-15842-1-git-send-email-Zubair.Kakakhel@imgtec.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch, if a sample is triggered inside a module not in
/lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf
report' will still be unable to find the correct symbol. For example:
# rm -rf ~/.debug/
# perf buildid-cache -a ./mymodule.ko
# perf probe -m ./mymodule.ko -a get_mymodule_val
Added new event:
probe:get_mymodule_val (on get_mymodule_val in mymodule)
You can now use it in all perf tools, such as:
perf record -e probe:get_mymodule_val -aR sleep 1
# perf record -e probe:get_mymodule_val cat /proc/mymodule
mymodule:3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf report --stdio
[SNIP]
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
100.00% cat [mymodule] [k] 0x0000000000000001
# perf report -vvvv --stdio
dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70
symbol__new: get_mymodule_val 0x70-0x8a
[SNIP]
This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod
is true only when its file is found in some well know directories. All
files loaded from buildid-cache are treated as user programs. Following
dso__load_sym() set map->pgoff incorrectly.
This patch gives kernel modules in buildid-cache a chance to adjust
value of kmod. After dso__load() get the type of symbols, if it is
buildid, check the last 3 chars of original filename against '.ko', and
adjust the value of kmod if the file is a kernel module.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--system' option means $(sysconfdir)/perfconfig and '--user' means
$HOME/.perfconfig. If none is used, both system and user config file are
read. E.g.:
# perf config [<file-option>] [options]
With an specific config file:
# perf config --user | --system
or both user and system config file:
# perf config
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1455126685-32367-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes the checkpatch.pl error to bpf_dbg.c:
ERROR: do not initialise statics to 0
Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately the existing test relied on packet payload in order to
map incoming packets to sockets. In order to get this to work with TCP,
TCP_FASTOPEN needed to be used.
Since the fast open path is slightly different than the standard TCP path,
I created a second test which sends to reuseport group members based
on receiving cpu core id. This will probably serve as a better
real-world example use as well.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"rm -rf" is bricking some peoples' laptops because of variables being
used to store non-reinitializable firmware driver data that's required
to POST the hardware.
These are 100% bugs, and they need to be fixed, but in the mean time it
shouldn't be easy to *accidentally* brick machines.
We have to have delete working, and picking which variables do and don't
work for deletion is quite intractable, so instead make everything
immutable by default (except for a whitelist), and make tools that
aren't quite so broad-spectrum unset the immutable flag.
Signed-off-by: Peter Jones <pjones@redhat.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Lockdep is initialized at compile time now. Get rid of lockdep_init().
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: mm-commits@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This creates GPIO tools under tools/gpio/* and adds a single
example program to list the GPIOs on a system. When proper
devices are created it provides this minimal output:
Cc: Johan Hovold <johan@kernel.org>
Cc: Michael Welling <mwelling@ieee.org>
Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use the local uapi headers to keep in sync with "recently" added #define's
(e.g. VSS_OP_REGISTER1).
Fixes: 3eb2094c59 ("Adding makefile for tools/hv")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds source line information support to perf for jitted code.
The source line info must be emitted by the runtime, such as JVMTI.
Perf injects extract the source line info from the jitdump file and adds
the corresponding .debug_lines section in the ELF image generated for
each jitted function.
The source line enables matching any address in the profile with a
source file and line number.
The improvement is visible in perf annotate with the source code
displayed alongside the assembly code.
The dwarf code leverages the support from OProfile which is also
released under GPLv2. Copyright 2007 OProfile authors.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a standalone JVMTI library to help profile Java jitted code with perf
record/perf report. The library is not installed or compiled automatically by
perf Makefile. It is not used directly by perf. It is arch agnostic and has
been tested on X86 and ARM. It needs to be used with a Java runtime, such as
OpenJDK, as follows:
$ java -agentpath:libjvmti.so .......
See the "Committer Notes" below on how to build it.
When used this way, java will generate a jitdump binary file in
$HOME/.debug/java/jit/java-jit-*
This binary dump file contains information to help symbolize and
annotate jitted code.
The jitdump information must be injected into the perf.data file
using:
$ perf inject --jit -i perf.data -o perf.data.jitted
This injects the MMAP records to cover the jitted code and also generates
one ELF image for each jitted function. The ELF images are created in the
same subdir as the jitdump file. The MMAP records point there too.
Then, to visualize the function or asm profile, simply use the regular
perf commands:
$ perf report -i perf.data.jitted
or
$ perf annotate -i perf.data.jitted
JVMTI agent code adapted from the OProfile's opagent code.
This version of the JVMTI agent is using the CLOCK_MONOTONIC as the time
source to timestamp jit samples. To correlate with perf_events samples,
it needs to run on kernel 4.0.0-rc5+ or later with the following commit
from Peter Zijlstra:
34f439278c ("perf: Add per event clockid support")
With this patch recording jitted code is done as follows:
$ perf record -k mono -- java -agentpath:libjvmti.so .......
--------------------------------------------------------------------------
Committer Notes:
Extended testing instructions:
$ cd tools/perf/jvmti/
$ dnf install java-devel
$ make
Then, create some simple java stuff to record some samples:
$ cat hello.java
public class hello {
public static void main(String[] args) {
System.out.println("Hello, World");
}
}
$ javac hello.java
$ java hello
Hello, World
$
And then record it using this jvmti thing:
$ perf record -k mono java -agentpath:/home/acme/git/linux/tools/perf/jvmti/libjvmti.so hello
java: jvmti: jitdump in /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jit-1908.dump
Hello, World
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (268 samples) ]
$
Now lets insert the PERF_RECORD_MMAP2 records to point jitted mmaps to
files created by the agent:
$ perf inject --jit -i perf.data -o perf.data.jitted
And finally see that it did its job:
$ perf report -D -i perf.data.jitted | grep PERF_RECORD_MMAP2 | tail -5
79197149129422 0xfe10 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428bd60(0x80) @ 0x40 fd:02 1840554 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-283.so
79197149235701 0xfeb0 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428ba60(0x180) @ 0x40 fd:02 1840555 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-284.so
79197149250558 0xff50 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b860(0x180) @ 0x40 fd:02 1840556 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-285.so
79197149714746 0xfff0 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b660(0x180) @ 0x40 fd:02 1840557 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-286.so
79197149806558 0x10090 [0xa0]: PERF_RECORD_MMAP2 1908/1923: [0x7f172428b460(0x180) @ 0x40 fd:02 1840558 1]: --xs /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-287.so
$
So:
$ perf report -D -i perf.data | grep PERF_RECORD_MMAP2 | wc -l
Failed to open /tmp/perf-1908.map, continuing without symbols
21
$ perf report -D -i perf.data.jitted | grep PERF_RECORD_MMAP2 | wc -l
307
$ echo $((307 - 21))
286
$
286 extra PERF_RECORD_MMAP2 records.
All for thise tiny, with just one function, ELF files:
$ file /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so
/home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), corrupted program header size, BuildID[sha1]=ae54a2ebc3ecf0ba547bfc8cabdea1519df5203f, not stripped
$ readelf -sw /home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so
Symbol table '.symtab' contains 2 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000040 9 FUNC LOCAL DEFAULT 1 atomic_cmpxchg_long
$
Inserted into the build-id cache:
$ ls -la ~/.debug/.build-id/ae/54a2ebc3ecf0ba547bfc8cabdea1519df5203f
lrwxrwxrwx. 1 acme acme 111 Feb 5 11:30 /home/acme/.debug/.build-id/ae/54a2ebc3ecf0ba547bfc8cabdea1519df5203f -> ../../home/acme/.debug/jit/java-jit-20160205.XXWIEDls/jitted-1908-9.so/ae54a2ebc3ecf0ba547bfc8cabdea1519df5203f
Note: check why 'file' reports that 'corrupted program header size'.
With a stupid java hog to do some profiling:
$ cat hog.java
public class hog {
private static double do_something_else(int i) {
double total = 0;
while (i > 0) {
total += Math.log(i--);
}
return total;
}
private static double do_something(int i) {
double total = 0;
while (i > 0) {
total += Math.sqrt(i--) + do_something_else(i / 100);
}
return total;
}
public static void main(String[] args) {
System.out.println(String.format("%s=%f & %f", args[0],
do_something(Integer.parseInt(args[0])),
do_something_else(Integer.parseInt(args[1]))));
}
}
$ javac hog.java
$ perf record -F 10000 -g -k mono java -agentpath:/home/acme/git/linux/tools/perf/jvmti/libjvmti.so hog 100000 2345000
java: jvmti: jitdump in /home/acme/.debug/jit/java-jit-20160205.XX4sqd14/jit-8670.dump
100000=291561592.669602 & 32050989.778714
[ perf record: Woken up 6 times to write data ]
[ perf record: Captured and wrote 1.536 MB perf.data (12538 samples) ]
$ perf inject --jit -i perf.data -o perf.data.jitted
Looking at the 'perf report' TUI, at one expanded callchain leading
to the jitted code:
$ perf report --no-children -i perf.data.jitted
Samples: 12K of event 'cycles:pp', Event count (approx.): 3829569932
Overhead Comm Shared Object Symbol
- 93.38% java jitted-8670-291.so [.] class hog.do_something_else(int)
class hog.do_something_else(int)
- Interpreter
- 75.86% call_stub
JavaCalls::call_helper
jni_invoke_static
jni_CallStaticVoidMethod
JavaMain
start_thread
- 17.52% JavaCalls::call_helper
jni_invoke_static
jni_CallStaticVoidMethod
JavaMain
start_thread
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-4-git-send-email-eranian@google.com
[ Made it build on fedora23, added some build/usage instructions ]
[ Check if filename != NULL in compiled_method_load_cb, fixing segfault ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a --jit/-j option to perf inject.
This options injects MMAP records into the perf.data file to cover the
jitted code mmaps. It also emits ELF images for each function in the
jidump file. Those images are created where the jitdump file is. The
MMAP records point to that location as well.
Typical flow:
$ perf record -k mono -- java -agentpath:libpjvmti.so java_class
$ perf inject --jit -i perf.data -o perf.data.jitted
$ perf report -i perf.data.jitted
Note that jitdump.h support is not limited to Java, it works with any
jitted environment modified to emit the jitdump file format, include
those where code can be jitted multiple times and moved around.
The jitdump.h format is adapted from the Oprofile project.
The genelf.c (ELF binary generation) depends on MD5 hash encoding for
the buildid. To enable this, libssl-dev must be installed. If not, then
genelf.c defaults to using urandom to generate the buildid, which is not
ideal. The Makefile auto-detects the presence on libssl-dev.
This version mmaps the jitdump file to create a marker MMAP record in
the perf.data file. The marker is used to detect jitdump and cause perf
inject to inject the jitted mmaps and generate ELF images for jitted
functions.
In V8, the following fixes and changes were made among other things:
- the jidump header format include a new flags field to be used
to carry information about the configuration of the runtime agent.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- Fix mmap pgoff: MMAP event pgoff must be the offset within the ELF file
at which the code resides.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- Fix ELF virtual addresses: perf tools expect the ELF virtual addresses of dynamic
objects to match the file offset.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
- JIT MMAP injection does not obey finished_round semantics. JIT MMAP injection injects all
MMAP events in one go, so it does not obey finished_round semantics, so drop the
finished_round events from the output perf.data file.
Contributed by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ Moved inject.build_ids ordering bits to a separate patch, fixed the NO_LIBELF=1 build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make sure the mmap records are ordered correctly and so that the
correct especially due to jitted code mmaps.
We cannot generate the buildid hit list and inject the jit mmaps (will
come right after this patch) in at the same time for now.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to generate build-ids in the jitdump code.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ tools/perf/Makefile.perf comment about NO_LIBCRYPTO and added it to tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Java function descriptor demangling support. Something bfd cannot
do.
Use the JAVA_DEMANGLE_NORET flag to avoid decoding the return type of
functions.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steam frequently puts game binaries in folders with spaces.
Note: "(deleted)" markers are now treated as part of the file name.
Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 6064803313 ("perf tools: Use sscanf for parsing /proc/pid/maps")
Link: http://lkml.kernel.org/r/20160119190303.GA17579@marcin-Inspiron-7720
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jhmnf9g7y9ryqcjql00unk5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not parallelize 'clean' with other targets, figure out if it is
present and do it first, then the other targets.
Noticed with:
tools/perf> make -j24 clean all
LD arch/libperf-in.o
LD plugin_xen-in.o
arch//libperf-in.o: file not recognized: File truncated
make[3]: *** [arch/libperf-in.o] Error 1
make[2]: *** [arch] Error 2
make[2]: *** Waiting for unfinished jobs....
AR libapi.a
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kb0qs29zbz7hxn32mc5zbsoz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'man.viewer' variable and how to add new man viewer tools.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-6-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'report' section's variables:
'percent-limit', 'queue-size' and 'children'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-4-git-send-email-treeze.taeung@gmail.com
[ Fix some grammar issues, add some more info ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'call-graph' section and its variables:
'record-mode', 'dump-size', 'print-type', 'order', 'sort-key',
'threshold' and 'print-limit'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This option controls display of column headers (like 'Overhead' and
'Symbol') in 'report' and 'top'. If this option is false, they are
hidden. This option is only applied to TUI.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454577913-16401-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we do less visual searching on the 'make build-test' output to
see the feature related variables:
After:
$ make -C tools/perf build-test
<SNIP>
make_no_newt_O: cd . && make NO_NEWT=1 FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP O=/tmp/tmp.dz55IX DESTDIR=/tmp/tmp.X29xxo
make_tags_O: cd . && make tags FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP O=/tmp/tmp.6ecLh8 DESTDIR=/tmp/tmp.6vIla578Ho
make_util_pmu_bison_o_O: cd . && make util/pmu-bison.o FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP O=/tmp/tmp.SVPM2G DESTDIR=/tmp/tmp.C0oAam
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dx4krgzqa566v1pedrbrcchi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since this is the name that 'make' will look for if no explicit -f file
is passed.
This in turn makes the output of 'build-test' more compact:
Before:
$ perf stat make -C tools/perf build-test
<SNIP>
cd . && make FEATURE_DUMP_COPY=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP feature-dump
make_no_libaudit_O: cd . && make -f Makefile O=/tmp/tmp.tHIa0Kkk2Y DESTDIR=/tmp/tmp.foK7rckkVi NO_LIBAUDIT=1 FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP
<SNIP>
After:
$ perf stat make -C tools/perf build-test
<SNIP>
make_no_libaudit_O: cd . && make O=/tmp/tmp.tHIa0Kkk2Y DESTDIR=/tmp/tmp.foK7rckkVi NO_LIBAUDIT=1 FEATURES_DUMP=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m440lb8dkfsywsyah0htif6t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add 'L' hotkey to dynamicly set the percent threshold for histogram
entries and callchains, i.e. dynamicly do what the --percent-limit
command line option to 'top' and 'report' does. (Namhyung Kim)
Infrastructure:
- Per hists field and sort lists, that will be used, for instance,
in the c2c tool (Jiri Olsa)
Documentation:
- Update documentation of --sort and --perf-limit options
for 'perf report' (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWsiK5AAoJENZQFvNTUqpADJoQAIVBlW29iw+qshg0bWM+1xw/
RBKgTCLT2VPK9wE00qIQOmZjf4ZRHLWDBVDf8iB36UMhY4q4vUaWYRJu8dZ/IoPx
AQPg5JFe8INd2voDHo6E8vCdS58Mk7NWRdWs9dctVHGa7LjdDdLhYNLcghIps8Pb
4cSLltmaa/XGxBvu526g6TRSaoaCIVO1W0wxNvoc3XFipI7zqtgCasLr5Hb6RxdD
BUC7WYuJ5n96EqR0vjeV7ajv9m65+RaLFIIa6vjUIEdAB+3sDIpfiMpkIprAzoze
TcsGpSz5+5yAbnezgIoHaRvFWzd/hune62sZmCySd1E3+5Vb8JbUo4WxNTAlTwdS
XbwY1VyLYDnKFVqQSAElFbeXad8kbkd06tzLgUOTfoeHWKMp5qxfH/myLNjF42pK
d5mQ5TnN/ESsj3D/3TcgBzmIOGIS5R2evKsIIwip4rSGAP901U+RRBMDE87vn0M2
TsqrkKPZgQcYTA9FKlWIPCdT0Y+yYr0jvgRabN9rQMCp5r7Wb7hrpwHGMPp16hbT
1mnMm8N+moIMv1Wp0R5C75bls2uFaOiS3Y7XyORjqfwHMfzLUqPWPSmDwtSrbE8a
FTDGInJubTJRXdjTE/0+d+zZbpiEqTybfjOce3AcB2KBMfSJaQRvLcvAei21GMWC
hrBhLY6ngbgd7jD1RTHg
=foQI
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Add 'L' hotkey to dynamicly set the percent threshold for histogram
entries and callchains, i.e. dynamicly do what the --percent-limit
command line option to 'top' and 'report' does. (Namhyung Kim)
Infrastructure changes:
- Per hists field and sort lists, that will be used, for instance,
in the c2c tool (Jiri Olsa)
Documentation changes:
- Update documentation of --sort and --perf-limit options
for 'perf report' (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- tracepoint_error() can receive e=NULL, robustify it, fixes a problem noticed
with a very specific combination: Machine with Intel PT (e.g. Broadwell),
kernel with no perf_event_attr.context_switch feature (e.g. 4.2) and unreadable
tracefs (for instance !root users), making the fallback from
perf_event_attr.context_switch to the sched:sched_switch tracepoint to fail
reading its info from tracefs, fix it. (Adrian Hunter)
- Fix segfault in intel pt, by making it follow the 'struct thread' lifetime cycle
checking expectations, noticed for instance, when processing perf.data files with
Intel PT data using 'perf script' and when exiting 'perf report' (Adrian Hunter)
- Fix CFI usage from .eh_frame and .debug_frame, which sometimes requires that we
fallback from .eh_frame to .debug_frame in architectures such as PowerPC (Hemant Kumar)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0cG5
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- tracepoint_error() can receive e=NULL, robustify it, fixes a problem noticed
with a very specific combination: Machine with Intel PT (e.g. Broadwell),
kernel with no perf_event_attr.context_switch feature (e.g. 4.2) and unreadable
tracefs (for instance !root users), making the fallback from
perf_event_attr.context_switch to the sched:sched_switch tracepoint to fail
reading its info from tracefs, fix it. (Adrian Hunter)
- Fix segfault in intel PT, by making it follow the 'struct thread' lifetime cycle
checking expectations, noticed for instance, when processing perf.data files with
Intel PT data using 'perf script' and when exiting 'perf report' (Adrian Hunter)
- Fix CFI usage from .eh_frame and .debug_frame, which sometimes requires that we
fallback from .eh_frame to .debug_frame in architectures such as PowerPC (Hemant Kumar)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We broke interval data displays with commit:
3f416f22d1 ("perf stat: Do not clean event's private stats")
This commit removed stats cleaning, which is important for '-r' option
to carry counters data over the whole run. But it's necessary to clean
it for interval mode, otherwise the displayed value is avg of all
previous values.
Before:
$ perf stat -e cycles -a -I 1000 record
# time counts unit events
1.000240796 75,216,287 cycles
2.000512791 107,823,524 cycles
$ perf stat report
# time counts unit events
1.000240796 75,216,287 cycles
2.000512791 91,519,906 cycles
Now:
$ perf stat report
# time counts unit events
1.000240796 75,216,287 cycles
2.000512791 107,823,524 cycles
Notice the second value being bigger (91,.. < 107,..).
This could be easily verified by using perf script which displays raw
stat data:
$ perf script
CPU THREAD VAL ENA RUN TIME EVENT
0 -1 23855779 1000209530 1000209530 1000240796 cycles
1 -1 33340397 1000224964 1000224964 1000240796 cycles
2 -1 15835415 1000226695 1000226695 1000240796 cycles
3 -1 2184696 1000228245 1000228245 1000240796 cycles
0 -1 97014312 2000514533 2000514533 2000512791 cycles
1 -1 46121497 2000543795 2000543795 2000512791 cycles
2 -1 32269530 2000543566 2000543566 2000512791 cycles
3 -1 7634472 2000544108 2000544108 2000512791 cycles
The sum of the first 4 values is the first interval aggregated value:
23855779 + 33340397 + 15835415 + 2184696 = 75,216,287
The sum of the second 4 values minus first value is the second interval
aggregated value:
97014312 + 46121497 + 32269530 + 7634472 - 75216287 = 107,823,524
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1454485436-20639-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'L' key action to change the percent limit applied to both of hist
entries and callchains.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --percent-limit option was changed to be applied to callchains as
well as to hist entries recently, but it missed to update the doc.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The description of the memory sort key (used by --mem-mode) was
misplaced. Move it under the --sort option so that it can be referenced
properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the hist object having the perf_hpp_list we can now iterate sort
format entries based in the hists object. Adding
hists__for_each_sort_list macro to do that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-27-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the hist object having the perf_hpp_list we can now iterate output
format entries based in the hists object. Adding hists__for_each_format
macro to do that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-26-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding hpp_list into struct hists object.
Initializing struct hists_evsel hists object to carry global
perf_hpp_list list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-25-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding struct perf_hpp_list argument to following helper functions:
void perf_hpp__setup_output_field(struct perf_hpp_list *list);
void perf_hpp__reset_output_field(struct perf_hpp_list *list);
void perf_hpp__append_sort_keys(struct perf_hpp_list *list);
so they could be used on hists's hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-24-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing perf_hpp_list all the way through setup_output_list so the
output entry could be added on the arbitrary list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-19-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 2 perf_hpp_list register helpers:
perf_hpp_list__column_register()
perf_hpp_list__register_sort_field()
to be called within existing helpers:
perf_hpp__column_register()
perf_hpp__register_sort_field()
to register format entries within global perf_hpp_list object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing perf_hpp_list__init function to have an easy way to
initialize perf_hpp_list struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gather output and sort lists under struct perf_hpp_list, so we could
have multiple instancies of sort/output format entries.
Replacing current perf_hpp__list and perf_hpp__sort_list lists with
single perf_hpp_list instance.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-15-git-send-email-jolsa@kernel.org
[ Renamed fields to .{fields,sorts} as suggested by Namhyung and acked by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating output fields parsing into setup_output_list function, so
it's separated from field_order string setup and could be reused later
in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating sort fields parsing into setup_sort_list function, so it's
separated from sort_order string setup and could be reused later in
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With multiple list holding format entries, we need the support properly
releasing format output/sort fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions are no longer needed. They operate over perf_hpp__format
array which is now used only as template for dynamic entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use static output fields, because we have single global
list of all sort/output fields.
We will add hists specific sort and output lists in following patches,
so we need all format entries to be dynamically allocated. Adding
support to allocate output sort field.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui initialization changes hpp format callbacks, based on the used
browser. Thus we need this init being processed before setup_sorting.
Replica of a patch by Jiri for 'perf report'.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui initialization changes hpp format callbacks, based on the used
browser. Thus we need this init being processed before setup_sorting.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have the 'equal' method implemented for hpp format entries
we can ease up the logic in the following functions and make them
generic wrt comparing format entries:
perf_hpp__setup_output_field
perf_hpp__append_sort_keys
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'hpp__equal' callback function to compare hpp output format
entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To easily compare format entries and make it available for all kinds of
format entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are going to add dynamic hpp format fields, so we need to make the
'len' change for the format itself, not in the perf_hpp__format
template.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently there's no way of comparing hpp format entries, which is
needed in following patches.
Adding _idx fields into struct perf_hpp_fmt to recognize and be able to
compare hpp format entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding evsel specific function to sort hists_evsel based hists. The
hists__output_resort can be now used to sort common hists object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently hists__output_resort() depends on hists based on hists_evsel
struct, but we need to be able to sort common hists as well.
Cutting out the sorting base sorting code into output_resort
function, so it can be reused in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Make --percent-limit apply to callchains also and fix some bugs
related to --percent-limit (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3p/S
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-3' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core callchain fixes and improvements from Arnaldo Carvalho de Melo <acme@redhat.com:
User visible changes:
- Make --percent-limit apply to callchains also and fix some bugs
related to --percent-limit (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
Infrastructure:
- Use the 'feature-dump' target to do the feature checks just once and then
add code to reuse that in the tests/make makefile, speeding up the
'make -C tools/perf build-test' target (Wang Nan)
- Reduce the number of tests the 'build-test' target do to those that don't
pollute the source tree (Arnaldo Carvalho de Melo)
- Improve the output of the build tests a bit by aligning the name of the
tests, more can be done to filter out uninteresting info in the output
(Arnaldo Carvalho de Melo)
- Add perf_evlist pointer to *info_priv_size(), more prep work for
supporting the coresight architecture (Mathieu Poirier)
- Improve the 'perf test bp_signal' test (Wang Nan)
- Check environment before starting the BPF 'perf test', so that we can just
'Skip' older kernels instead of 'FAIL'ing them (Wang Nan)
- Fix cpumode of synthesized buildid event (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CFBX
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf tooling changes from Arnaldo Carvalho de Melo:
New features:
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
Infrastructure changes:
- Use the 'feature-dump' target to do the feature checks just once and then
add code to reuse that in the tests/make makefile, speeding up the
'make -C tools/perf build-test' target (Wang Nan)
- Reduce the number of tests the 'build-test' target do to those that don't
pollute the source tree (Arnaldo Carvalho de Melo)
- Improve the output of the build tests a bit by aligning the name of the
tests, more can be done to filter out uninteresting info in the output
(Arnaldo Carvalho de Melo)
- Add perf_evlist pointer to *info_priv_size(), more prep work for
supporting the coresight architecture (Mathieu Poirier)
- Improve the 'perf test bp_signal' test (Wang Nan)
- Check environment before starting the BPF 'perf test', so that we can just
'Skip' older kernels instead of 'FAIL'ing them (Wang Nan)
- Fix cpumode of synthesized buildid event (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Rename the "colors.code" ~/.perfconfig variable to "colors.jump_arrows",
as it controls just the that UI element in the annotate browser (Taeung Song)
- Avoid trying to read ELF symtabs from device files, noticed while doing
memory profiling work (Jiri Olsa)
- Improve context detection when offering options in the hists browser,
i.e. some options don't make sense when the browser is not working with
a perf.data file ('perf top' mode), only in 'perf report' mode, like
scripting (Namhyung Kim)
Infrastructure:
- Elliminate duplication in the hists browser filter functions, getting the
common part into a function that receives callbacks for filtering by
DSO, thread, etc (Namhyung Kim)
- Fix misleadingly indented assignment, found using
gcc6 -Wmisleading-indentation (Markus Trippelsdorf)
- Handle LLVM relocation oddities in libbpf, introducing a 'perf test' that
detects such problems and then fixing the problem, so that the test now
passes (Wang Nan)
- More improvements to the build infrastructure to allow reusing the
feature detection facilities (Wang Nan)
- Auto initialize the globals needed by cpu__max_{cpu,node}() routines
(Arnaldo Carvalho de Melo)
Documentation:
- Document the perf sysctls in Documentation/sysctl/kernel.txt (Ben Hutchings)
- Document a bunch more ~/.perfconfig knobs (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cuZc
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Rename the "colors.code" ~/.perfconfig variable to "colors.jump_arrows",
as it controls just the that UI element in the annotate browser (Taeung Song)
- Avoid trying to read ELF symtabs from device files, noticed while doing
memory profiling work (Jiri Olsa)
- Improve context detection when offering options in the hists browser,
i.e. some options don't make sense when the browser is not working with
a perf.data file ('perf top' mode), only in 'perf report' mode, like
scripting (Namhyung Kim)
Infrastructure changes:
- Elliminate duplication in the hists browser filter functions, getting the
common part into a function that receives callbacks for filtering by
DSO, thread, etc. (Namhyung Kim)
- Fix misleadingly indented assignment, found using
gcc6 -Wmisleading-indentation (Markus Trippelsdorf)
- Handle LLVM relocation oddities in libbpf, introducing a 'perf test' that
detects such problems and then fixing the problem, so that the test now
passes (Wang Nan)
- More improvements to the build infrastructure to allow reusing the
feature detection facilities (Wang Nan)
- Auto initialize the globals needed by cpu__max_{cpu,node}() routines
(Arnaldo Carvalho de Melo)
Documentation changes:
- Document the perf sysctls in Documentation/sysctl/kernel.txt (Ben Hutchings)
- Document a bunch more ~/.perfconfig knobs (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'perf probe' through debuginfo__find_probes() in util/probe-finder.c
checks for the functions' frame descriptions in either .eh_frame section
of an ELF or the .debug_frame.
The check is based on whether either one of these sections is present.
Depending on distro, toolchain defaults, architetcutre, build flags,
etc., CFI might be found in either .eh_frame and/or .debug_frame.
Sometimes, it may happen that, .eh_frame, even if present, may not be
complete and may miss some descriptions.
Therefore, to be sure, to find the CFI covering an address we will
always have to investigate both if available.
For e.g., in powerpc, this may happen:
$ gcc -g bin.c -o bin
$ objdump --dwarf ./bin
<1><145>: Abbrev Number: 7 (DW_TAG_subprogram)
<146> DW_AT_external : 1
<146> DW_AT_name : (indirect string, offset: 0x9e): main
<14a> DW_AT_decl_file : 1
<14b> DW_AT_decl_line : 39
<14c> DW_AT_prototyped : 1
<14c> DW_AT_type : <0x57>
<150> DW_AT_low_pc : 0x100007b8
If the .eh_frame and .debug_frame are checked for the same binary, we
will find that, .eh_frame (although present) doesn't contain a
description for "main" function.
But, .debug_frame has a description:
000000d8 00000024 00000000 FDE cie=00000000 pc=100007b8..10000838
DW_CFA_advance_loc: 16 to 100007c8
DW_CFA_def_cfa_offset: 144
DW_CFA_offset_extended_sf: r65 at cfa+16
...
Due to this (since, perf checks whether .eh_frame is present and goes on
searching for that address inside that frame), perf is unable to process
the probes:
# perf probe -x ./bin main
Failed to get call frame on 0x100007b8
Error: Failed to add events.
To avoid this issue, we need to check both the sections (.eh_frame and
.debug_frame), which is done in this patch.
Note that, we can always force everything into both .eh_frame and
.debug_frame by:
$ gcc bin.c -fasynchronous-unwind-tables -fno-dwarf2-cfi-asm -g -o bin
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1454426806-13974-1-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_process_auxtrace_info() creates a pt->unknown_thread thread
that eventually needs to be freed by the last thread__put() on it, when
its refcount hits zero, which may happen in
intel_pt_process_auxtrace_info() error handling path and triggers the
following segfault, which would happen as well at intel_pt_free, when
tools using this intel_pt codebase frees up resources:
# perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
0 a anaconda-ks.cfg bin perf.data perf.data.old perf-f23-bringup.todo
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.217 MB perf.data ]
#
# perf script -F event,comm,pid,tid,time,addr,ip,sym,dso,iregs
Samples for 'instructions:u' event do not have IREGS attribute set. Cannot print 'iregs' field.
intel_pt_synth_events: failed to synthesize 'instructions' event type
Segmentation fault (core dumped)
#
The problem is: there's a union in 'struct thread' combines a list_head
and a rb_node. The standard life cycle of a thread is: init rb_node in
the constructor, insert it into machine->threads rbtree using rb_node,
move it to machine->dead_threads using list_head, clean in the last
thread__put: list_del_init(&thread->node).
In the above command, it clean a thread before adding it into list,
causes the above segfault.
Since pt->unknown_thread will never live in an rbtree, initialize its
list node so that when list_del_init() is done on it we don't segfault.
After this patch:
# perf script -F event,comm,pid,tid,time,addr,ip,sym,dso,iregs
Samples for 'instructions:u' event do not have IREGS attribute set. Cannot print 'iregs' field.
intel_pt_synth_events: failed to synthesize 'instructions' event type
0x248 [0x88]: failed to process type: 70
#
Reported-by: Tong Zhang <ztong@vt.edu>
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: http://lkml.kernel.org/r/1454296865-19749-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull libnvdimm fixes from Dan Williams:
"1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
area for storing a struct page array.
2/ Fixes for dax operations on a raw block device to prevent pagecache
collisions with dax mappings.
3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
pointer de-reference.
These have received build success notification from the kbuild robot
across 153 configs and pass the latest ndctl tests"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
phys_to_pfn_t: use phys_addr_t
mm: fix pfn_t to page conversion in vm_insert_mixed
block: use DAX for partition table reads
block: revert runtime dax control of the raw block device
fs, block: force direct-I/O for dax-enabled block devices
devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
libnvdimm, pfn: fix restoring memmap location
libnvdimm: fix mode determination for e820 devices
When all callchains of a hist entry is percent-limited, do not add a
blank line at the end. It makes the entry look like it doesn't have
callchains.
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornet
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report --no-children --percent-limit 0.01 --tui
...
- 0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
- vm_mmap_pgoff
+ 0.02% sys_mmap_pgoff
+ 0.02% vm_mmap
+ 0.02% mprotect_fixup
Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.
Before:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- mmap_region
do_mmap_pgoff
vm_mmap_pgoff
After:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
vm_mmap_pgoff
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass parent node's total period to callchain print functions. This info
is needed by later patch to determine whether it can omit percent or not
correctly.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 8c430a3486 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.
To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a3486 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report -s comm --percent-limit 0.01 --stdio
...
9.95% swapper
|
|--7.57%--intel_idle
| cpuidle_enter_state
| cpuidle_enter
| call_cpuidle
| cpu_startup_entry
| |
| |--4.89%--start_secondary
| |
| --2.68%--rest_init
| start_kernel
| x86_64_start_reservations
| x86_64_start_kernel
|
|--0.15%--__schedule
| |
| |--0.13%--schedule
| | schedule_preempt_disable
| | cpu_startup_entry
| | |
| | |--0.09%--start_secondary
| | |
| | --0.04%--rest_init
| | start_kernel
| | x86_64_start_reservations
| | x86_64_start_kernel
| |
| --0.01%--schedule_preempt_disabled
| cpu_startup_entry
...
Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.
Before:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
--7.57%--intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass hist entry's period to graph callchain print function. This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's just a wrapper function to align the start position ofcallchains to
'comm' of each thread if it's a first sort key. But it doesn't not work
with tracepoint events and also with upcoming hierarchy view.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently --percent-limit option only works for hist entries. However
it'd be better to have same effect to callchains as well
Requested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the hist entry addition path doesn't update total_period of
hists and it's calculated during 'resort' path. But the resort path
needs to know the total period before doing its job because it's used
for calculating percent limit of callchains in hist entries.
So this patch update the total period during the addition path. It
makes the percent limit of callchains working (again).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The total period should be get using hists__total_period() since it
takes filtered entries into account. In addition, if callchain mode is
'fractal', the total period should be the entry's period.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes segmentation fault using, for instance:
(gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
(gdb) bt
#0 0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
#1 0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:433
#2 0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:498
#3 0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:936
#4 0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391
#5 0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361
#6 0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401
#7 0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253
#8 0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364
#9 0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664
#10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539
#11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264
#12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390
#13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451
#14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495
#15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618
(gdb)
Intel PT attempts to find the sched:sched_switch tracepoint but that seg
faults if tracefs is not readable, because the error reporting structure
is null, as errors are not reported when automatically adding
tracepoints. Fix by checking before using.
Committer note:
This doesn't take place in a kernel that supports
perf_event_attr.context_switch, that is the default way that will be
used for tracking context switches, only in older kernels, like 4.2, in
a machine with Intel PT (e.g. Broadwell) for non-priviledged users.
Further info from a similar patch by Wang:
The error is in tracepoint_error: it assumes the 'e' parameter is valid.
However, there are many situation a parse_event() can be called without
parse_events_error. See result of
$ grep 'parse_events(.*NULL)' ./tools/perf/ -r'
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tong Zhang <ztong@vt.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 196581717d ("perf tools: Enhance parsing events tracepoint error output")
Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull timer fixes from Thomas Gleixner:
"The timer departement delivers:
- a regression fix for the NTP code along with a proper selftest
- prevent a spurious timer interrupt in the NOHZ lowres code
- a fix for user space interfaces returning the remaining time on
architectures with CONFIG_TIME_LOW_RES=y
- a few patches to fix COMPILE_TEST fallout"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
clocksource: Fix dependencies for archs w/o HAS_IOMEM
clocksource: Select CLKSRC_MMIO where needed
tick/sched: Hide unused oneshot timer code
kselftests: timers: Add adjtimex SETOFFSET validity tests
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
hrtimer: Handle remaining time proper for TIME_LOW_RES
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
Pull perf fixes from Thomas Gleixner:
"This is much bigger than typical fixes, but Peter found a category of
races that spurred more fixes and more debugging enhancements. Work
started before the merge window, but got finished only now.
Aside of that this contains the usual small fixes to perf and tools.
Nothing particular exciting"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
perf: Remove/simplify lockdep annotation
perf: Synchronously clean up child events
perf: Untangle 'owner' confusion
perf: Add flags argument to perf_remove_from_context()
perf: Clean up sync_child_event()
perf: Robustify event->owner usage and SMP ordering
perf: Fix STATE_EXIT usage
perf: Update locking order
perf: Remove __free_event()
perf/bpf: Convert perf_event_array to use struct file
perf: Fix NULL deref
perf/x86: De-obfuscate code
perf/x86: Fix uninitialized value usage
perf: Fix race in perf_event_exit_task_context()
perf: Fix orphan hole
perf stat: Do not clean event's private stats
perf hists: Fix HISTC_MEM_DCACHELINE width setting
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tests: Remove wrong semicolon in while loop in CQM test
perf: Synchronously free aux pages in case of allocation failure
...
A dma_addr_t is potentially smaller than a phys_addr_t on some archs.
Don't truncate the address when doing the pfn conversion.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Matthew Wilcox <willy@linux.intel.com>
[willy: fix pfn_t_to_phys as well]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
$ make -C tools/perf build-test
make[1]: Entering directory `/home/acme/git/linux/tools/perf'
make_pure_O: cd . && make -f Makefile O=/tmp/tmp.mPx0Cmik3f DESTDIR=/tmp/tmp.U0SUmVbtJm
make_clean_all_O: cd . && make -f Makefile O=/tmp/tmp.Yl5UzhTU7T DESTDIR=/tmp/tmp.fop1E4jdER clean all
make_debug_O: cd . && make -f Makefile O=/tmp/tmp.pMn2ozBoXC DESTDIR=/tmp/tmp.azxhDp5sEp DEBUG=1
make_no_libperl_O: cd . && make -f Makefile O=/tmp/tmp.qJPiINMtA7 DESTDIR=/tmp/tmp.KNMrLeGDxZ NO_LIBPERL=1
<SNIP>
More needs to be done to make it more compact, i.e. elide the '-f Makefile',
remove that 'cd . &&', move the DESTDIR= and O= to the end, as they don't
convey that much information besides the fact that they are being set to some
random directory just for this build, move the meat, i.e. the meaningful
feature disabling bits to the start, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wir3w3o4f1nmbgcxgnx8cj9c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Powerpc provides hcall events that also provides insights into guest
behaviour. Enhance perf kvm stat to record and analyze hcall events.
- To trace hcall events :
perf kvm stat record
- To show the results :
perf kvm stat report --event=hcall
The result shows the number of hypervisor calls from the guest grouped
by their respective reasons displayed with the frequency.
This patch makes use of two additional tracepoints
"kvm_hv:kvm_hcall_enter" and "kvm_hv:kvm_hcall_exit". To map the hcall
codes to their respective names, it needs a mapping. Such mapping is
added in this patch in book3s_hcalls.h.
# pgrep qemu
A sample output :
19378
60515
2 VMs running.
# perf kvm stat record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.153 MB perf.data.guest (39624
samples) ]
# perf kvm stat report -p 60515 --event=hcall
Analyze events for all VMs, all VCPUs:
HCALL-EVENT Samples Samples% Time% MinTime MaxTime AvgTime
H_IPI 822 66.08% 88.10% 0.63us 11.38us 2.05us (+- 1.42%)
H_SEND_CRQ 144 11.58% 3.77% 0.41us 0.88us 0.50us (+- 1.47%)
H_VIO_SIGNAL 118 9.49% 2.86% 0.37us 0.83us 0.47us (+- 1.43%)
H_PUT_TERM_CHAR 76 6.11% 2.07% 0.37us 0.90us 0.52us (+- 2.43%)
H_GET_TERM_CHAR 74 5.95% 2.23% 0.37us 1.70us 0.58us (+- 4.77%)
H_RTAS 6 0.48% 0.85% 1.10us 9.25us 2.70us (+-48.57%)
H_PERFMON 4 0.32% 0.12% 0.41us 0.96us 0.59us (+-20.92%)
Total Samples:1244, Total events handled time:1916.69us.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-4-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf kvm can be used to analyze guest exit reasons. This support already
exists in x86. Hence, porting it to powerpc.
- To trace KVM events :
perf kvm stat record
If many guests are running, we can track for a specific guest by using
--pid as in : perf kvm stat record --pid <pid>
- To see the results :
perf kvm stat report
The result shows the number of exits (from the guest context to
host/hypervisor context) grouped by their respective exit reasons with
their frequency.
Since, different powerpc machines have different KVM tracepoints, this
patch discovers the available tracepoints dynamically and accordingly
looks for them. If any single tracepoint is not present, this support
won't be enabled for reporting. To record, this will fail if any of the
events we are looking to record isn't available. Right now, its only
supported on PowerPC Book3S_HV architectures.
To analyze the different exits, group them and present them (in a slight
descriptive way) to the user, we need a mapping between the "exit code"
(dumped in the kvm_guest_exit tracepoint data) and to its related
Interrupt vector description (exit reason). This patch adds this mapping
in book3s_hv_exits.h.
It records on two available KVM tracepoints for book3s_hv:
"kvm_hv:kvm_guest_exit" and "kvm_hv:kvm_guest_enter".
Here is a sample o/p:
# pgrep qemu
19378
60515
2 Guests are running on the host.
# perf kvm stat record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.153 MB perf.data.guest (39624
samples) ]
# perf kvm stat report -p 60515
Analyze events for pid(s) 60515, all VCPUs:
VM-EXIT Samples Samples% Time% MinTime MaxTime Avg time
SYSCALL 9141 63.67% 7.49% 1.26us 5782.39us 9.87us (+- 6.46%)
H_DATA_STORAGE 4114 28.66% 5.07% 1.72us 4597.68us 14.84us (+-20.06%)
HV_DECREMENTER 418 2.91% 4.26% 0.70us 30002.22us 122.58us (+-70.29%)
EXTERNAL 392 2.73% 0.06% 0.64us 104.10us 1.94us (+-18.83%)
RETURN_TO_HOST 287 2.00% 83.11% 1.53us 124240.15us 3486.52us (+-16.81%)
H_INST_STORAGE 5 0.03% 0.00% 1.88us 3.73us 2.39us (+-14.20%)
Total Samples:14357, Total events handled time:1203918.42us.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-3-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch removes the "const" qualifier from kvm_events_tp declaration
to account for the fact that some architectures may need to update this
variable dynamically. For instance, powerpc will need to update this
variable dynamically depending on the machine type.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-2-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its better to remove the dependency on uapi/kvm_perf.h to allow dynamic
discovery of kvm events (if its needed). To do this, some extern
variables have been introduced with which we can keep the generic
functions generic.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-1-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' knows whether buildid cache is enabled (via
--no-no-buildid-cache) deliberately. Buildid cache can be turned off in
some situations.
Output switching support needs this feature to turn off buildid cache
by default.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-33-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Timestamp generation becomes a public available helper. Which will
be used by 'perf record', help it output to split output file based
on time.
For example:
perf.data.2015122620363710
perf.data.2015122620364092
perf.data.2015122620365423
...
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-27-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will Deacon [1] has some question on patch [2]. This patch improves
test__bp_signal so we can test:
1. A watchpoint and a breakpoint that fire on the same instruction
2. Nested signals
Test result:
On x86_64 and ARM64 (result are similar with patch [2] on ARM64):
# ./perf test -v signal
17: Test breakpoint overflow signal handler :
--- start ---
test child forked, pid 10213
count1 1, count2 3, count3 2, overflow 3, overflows_2 3
test child finished with 0
---- end ----
Test breakpoint overflow signal handler: Ok
So at least 2 cases Will doubted are handled correctly.
[1] http://lkml.kernel.org/g/20160104165535.GI1616@arm.com
[2] http://lkml.kernel.org/g/1450921362-198371-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copying perf to old kernel system results:
# perf test bpf
37: Test BPF filter :
37.1: Test basic BPF filtering : FAILED!
37.2: Test BPF prologue generation : Skip
However, in case when kernel doesn't support a test case it should
return 'Skip', 'FAILED!' should be reserved for kernel tests for when
the kernel supports a feature that then fails to work as advertised.
This patch checks environment before real testcase.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a nasty confusion that, for kernel module, dso->kernel is not
necessary to be DSO_TYPE_KERNEL or DSO_TYPE_GUEST_KERNEL. These two
enums are for vmlinux. See thread [1]. We tried to fix this part but it
is costy.
Code machine__write_buildid_table() is another unfortunate function fall
into this trap that, when issuing buildid event for a kernel module,
cpumode it gives to the event is PERF_RECORD_MISC_USER, not
PERF_RECORD_MISC_KERNEL.
However, even with this bug, most of the time it doesn't causes real
problem. I find this issue when trying to use a perf before commit
3d39ac5386 ("perf machine: No need to have two DSOs lists") to parse a
perf.data generated by newest perf.
[1] https://lkml.org/lkml/2015/9/21/908
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454089251-203152-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On some architecture the size of the private header may be dependent on
the number of tracers used in the session. As such adding a "struct
perf_evlist *" parameter, which should contain all the required
information.
Also adjusting the existing client of the interface to take the new
parameter into account.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: Mike Leach <mike.leach@arm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Tor Jeremiassen <tor@ti.com>
Link: http://lkml.kernel.org/r/1452807977-8069-22-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'tools/perf/test/make' makefile has in its default, 'all' target
builds that will pollute the source code directory, i.e. that will not
use O= variable.
The 'build-test' should be run as often as possible, preferrably after
each non strictly non-code commit, so speed it up by selecting just
the O= targets.
Furthermore it tests both the Makefile.perf file, that is normally
driven by the main Makefile, and the Makefile, reduce the time in half
by having just MK=Makefile, the most usual, tested by 'build-test'.
Please run:
make -C tools/perf -f tests/make
from time to time for testing also the in-place build tests.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jrt9utscsiqkmjy3ccufostd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To prevent the feature check tests to run repeately, one time per
'tests/make' target/test, this patch utilizes the previously introduced
'feature-dump' make target and FEATURES_DUMP variable, making sure that
the feature checkers run only once when doing build-test for normal test
cases.
However, since standard users doesn't reuse features dump result, we'd
better give an option to check their behaviors. The above feature
should be used to make build-test faster only. Only utilize it for
build-test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454068269-235999-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make feature-dump' should give a stable result, so even 'NO_SOMETHING=1'
is given (for babeltrace, if LIBBABELTRACE=1 is not given), we should
try to detect those feature and {C,LD}FLAGS. Build or not should be
controled independent.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1454047050-204993-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This checks that ELF binaries are started with an appropriately
blank register state.
( There's currently a nasty special case in the entry asm to
arrange for this. I'm planning on removing the special case,
and this will help make sure I don't break it. )
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ef54f8d066b30a3eb36bbf26300eebb242185700.1454022279.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Previously the Makefile supported 32-bit-only tests and tests
that were 32-bit and 64-bit. This adds the support for tests
that are only built as 64-bit binaries.
There aren't any yet, but there might be a few some day.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Link: http://lkml.kernel.org/r/99789bfe65706e6df32cc7e13f656e8c9fa92031.1454022279.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I see problem with test-all case speedup, because it does not
comprise checks for 32bits compilations, fix it.
The problem could be noticed by calling:
make -C tools/perf feature-dump
That would end up misdetecting the feature-compile-x32, that, building
using 'gcc -mx32' needs stub headers not present in a fedora 23 devel
machine and thus fail to compile, but ended up appearing as detected,
i.e. present in tools/perf/FEATURE-DUMP as 'feature-compile-x32=1'.
With this fix it correctly appears as 'feature-compile-x32=0' and if we
uninstall the libc devel files for 32 bits (glibc-devel.i686), then the
relevant variable is flipped from 'feature-compile-32=1' to
'feature-compile-32=0'.
The same things happened for bionic and libbabeltrace, that were
misdetected because the are no tested in test-all.c
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u0sjaddf1r9m8icpd98ry7fz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An i386 binary can be linked correctly even without correct headers.
Which causes problem. For exmaple:
$ mv /tmp/oxygen_root/usr/include/gnu/stubs-32.h{,.bak}
$ make tools/perf
Auto-detecting system features:
... dwarf: [ on ]
[SNIP]
GEN common-cmds.h
CC perf-read-vdso32
In file included from /tmp/oxygen_root/usr/include/features.h:388:0,
from /tmp/oxygen_root/usr/include/stdio.h:27,
from perf-read-vdso.c:1:
/tmp/oxygen_root/usr/include/gnu/stubs.h:7:27: fatal error: gnu/stubs-32.h: No such file or directory
# include <gnu/stubs-32.h>
^
compilation terminated.
...
In this patch we checks not only compiler and linker, but also basic
headers in test-compile test case, make it fail on a platform
lacking correct headers.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1453893742-20603-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it was always checking if the initialization was done, use that
branch to do the initialization if not done already.
With this we reduce the number of exported globals from these files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160125212955.GG22501@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The script and data-switch context menu are only meaningful when it
deals with a data file. So add a check so that it cannot be shown when
perf-top is run.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453555902-18401-4-git-send-email-namhyung@kernel.org
[ Use goto skip_scripting instead of two is_report_browser() tests ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set FEATURE_TESTS to 'all' so all possible feature checkers are
executed. Without this setting the output feature dump file miss some
feature, for example, liberity. Select all checker so we won't get an
incomplete feature dump file.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1453715801-7732-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some simple tests to check both valid and invalid
offsets when using adjtimex's ADJ_SETOFFSET method.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Harald Hoyer <harald@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1453417415-19110-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Put feature checkers not in original FEATURE_TESTS to a new list and
allow subproject select all feature checkers by setting FEATURE_TESTS to
'all'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1453715801-7732-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Libbpf should check the target section before doing relocation to ensure
the relocation is correct. If not, a bug in LLVM causes an error. See
[1]. Also, if an incorrect BPF script uses both global variable and
map, global variable whould be treated as map and be relocated without
error.
This patch saves the id of the map section into obj->efile and compare
target section of a relocation symbol against it during relocation.
Previous patch introduces a test case about this problem. After this
patch:
# ~/perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
37.3: Test BPF relocation checker : Ok
# perf test -v BPF
...
37.3: Test BPF relocation checker :
...
libbpf: loading object '[bpf_relocation_test]' from buffer
libbpf: section .strtab, size 126, link 0, flags 0, type=3
libbpf: section .text, size 0, link 0, flags 6, type=1
libbpf: section .data, size 0, link 0, flags 3, type=1
libbpf: section .bss, size 0, link 0, flags 3, type=8
libbpf: section func=sys_write, size 104, link 0, flags 6, type=1
libbpf: found program func=sys_write
libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9
libbpf: section maps, size 16, link 0, flags 3, type=1
libbpf: maps in [bpf_relocation_test]: 16 bytes
libbpf: section license, size 4, link 0, flags 3, type=1
libbpf: license of [bpf_relocation_test] is GPL
libbpf: section version, size 4, link 0, flags 3, type=1
libbpf: kernel version of [bpf_relocation_test] is 40400
libbpf: section .symtab, size 144, link 1, flags 0, type=2
libbpf: map 0 is "my_table"
libbpf: collecting relocating info for: 'func=sys_write'
libbpf: Program 'func=sys_write' contains non-map related relo data pointing to section 65522
bpf: failed to load buffer
Compile BPF program failed.
test child finished with 0
---- end ----
Test BPF filter subtest 2: Ok
[1] https://llvm.org/bugs/show_bug.cgi?id=26243
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's a bug in LLVM that it can generate unneeded relocation
information. See [1] and [2]. Libbpf should check the target section of
a relocation symbol.
This patch adds a testcase which references a global variable (BPF
doesn't support global variables). Before fixing libbpf, the new test
case can be loaded into kernel, the global variable acts like the first
map. It is incorrect.
Result:
# ~/perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
37.3: Test BPF relocation checker : FAILED!
# ~/perf test -v BPF
...
libbpf: loading object '[bpf_relocation_test]' from buffer
libbpf: section .strtab, size 126, link 0, flags 0, type=3
libbpf: section .text, size 0, link 0, flags 6, type=1
libbpf: section .data, size 0, link 0, flags 3, type=1
libbpf: section .bss, size 0, link 0, flags 3, type=8
libbpf: section func=sys_write, size 104, link 0, flags 6, type=1
libbpf: found program func=sys_write
libbpf: section .relfunc=sys_write, size 16, link 10, flags 0, type=9
libbpf: section maps, size 16, link 0, flags 3, type=1
libbpf: maps in [bpf_relocation_test]: 16 bytes
libbpf: section license, size 4, link 0, flags 3, type=1
libbpf: license of [bpf_relocation_test] is GPL
libbpf: section version, size 4, link 0, flags 3, type=1
libbpf: kernel version of [bpf_relocation_test] is 40400
libbpf: section .symtab, size 144, link 1, flags 0, type=2
libbpf: map 0 is "my_table"
libbpf: collecting relocating info for: 'func=sys_write'
libbpf: relocation: insn_idx=7
Success unexpectedly: libbpf error when dealing with relocation
test child finished with -1
---- end ----
Test BPF filter subtest 2: FAILED!
[1] https://llvm.org/bugs/show_bug.cgi?id=26243
[2] https://patchwork.ozlabs.org/patch/571385/
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are cases where looking at just the next and prev entries is not
enough, like with:
$ readelf -sW /usr/lib/debug/lib/modules/4.3.3-301.fc23.x86_64/vmlinux | grep ffffffff81065ec0
4979: ffffffff81065ec0 53 FUNC LOCAL DEFAULT 1 try_to_free_pud_page
4980: ffffffff81065ec0 53 FUNC LOCAL DEFAULT 1 try_to_free_pte_page
4981: ffffffff81065ec0 53 FUNC LOCAL DEFAULT 1 try_to_free_pmd_page
So just search by name to see if the symbol is in kallsyms.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jj1vlljg7ol4i713l60rt5ai@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be used in the 'vmlinux matches kallsyms' 'perf test' entry.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m56g1853lz2c6nhnqxibq4jd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we check more strictly what each of the menu entries need, we
can stop bailing out when 'sym' is not in the --sort order, instead we
let each option be added if what it needs is present.
This way, for instance, we can run scripts on all samples, see DSO map
details when 'dso' is in the --sort provided, etc.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency with the other sort order checks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch, moved check to add_socket_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't offer a zoom into DSO when a bucket (struct hist_entry) may
have samples for more than one DSO, i.e. when 'dso' is not part of
the sort order, ditto for 'Map details', fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch, moved check to add_{dso,map}_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When this feature was introduced a check was made if there was a
resolved symbol under the cursor, it got lost in commit ea7cd59233
("perf hists browser: Split popup menu actions - part 2"), reinstate it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ea7cd59233 ("perf hists browser: Split popup menu actions - part 2")
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't offer a zoom into thread when a bucket (struct hist_entry) may
have samples for more than one thread, i.e. when 'pid' is not part of
the sort order, fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now the UI browsers will be able to offer thread related operations only
if the thread is part of the sort order in use, i.e. if hist_entry stats
are all for a single thread.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'annotate' section and its variables.
'hide_src_code', 'use_offset', 'jump_arrows',
'show_linenr', 'show_nr_jump' and 'show_total_period'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-5-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'tui' and 'gtk' sections and these variables.
'top', 'report' and 'annotate'
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Explain 'colors' section and its variables, used for The variables for
customizing the colors used in the output for the 'report', 'top' and
'annotate' in the TUI, those are:
'top', 'medium', 'normal', 'selected',
'jump_arrows', 'addr' and 'root'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
USe 'jump_arrows' config name instead of 'code' on 'colors' section.
'colors.code' config is only for jump arrows on assembly code listings
i.e.
│ ┌──jmp 1333
│ │ xchg %ax,%ax
│ │ mov %r15,%r10
│ └─→cmp %r15,%r14
But this config name seems unfit.
'jump_arrows' is more descriptive than 'code'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452240971-25418-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event_paranoid was only documented in source code and a perf error
message. Copy the documentation from the error message to
Documentation/sysctl/kernel.txt.
perf_cpu_time_max_percent was already documented but missing from the
list at the top, so add it there.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20160119213515.GG2637@decadent.org.uk
[ Remove reference to external Documentation file, provide info inline, as before ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__filter_by_xxx functions share same logic with different
filters. Factor out the common code into the hists__filter_by_type.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453252521-24398-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --exclude-other option sets HIST_FILTER__PARENT bit and it's only
set when a hist entry was created. DSO filters don't change this so no
need to have the check in hists__filter_by_dso() IMHO.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453252521-24398-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for the following functions to be global:
perf_evsel__reset_stat_priv
perf_evsel__alloc_stat_priv
perf_evsel__free_stat_priv
perf_evsel__alloc_prev_raw_counts
perf_evsel__free_prev_raw_counts
perf_evsel__alloc_stats
They all ended up in util/stat.c, and they no longer need to be called
from outside this object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453290995-18485-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With mem sampling we could get data source within mapped device file.
Processing such sample would block during report phase on trying to read
the device file.
Chacking for device files and skip the processing if it's detected.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453290995-18485-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One line in perf_pmu__parse_unit() is indented wrongly, leading to a
warning (=> error) from gcc 6:
util/pmu.c:156:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
sret = read(fd, alias->unit, UNIT_MAX_LEN);
^~~~
util/pmu.c:153:2: note: ...this 'if' clause, but it is not
if (fd == -1)
^~
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 410136f5dd ("tools/perf/stat: Add event unit and scale support")
Link: http://lkml.kernel.org/r/20151214154440.GC1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mel reported stddev reporting was broken due to following commit:
106a94a0f8 ("perf stat: Introduce read_counters function")
This commit merged interval and overall counters reading into single
read_counters function.
The old interval code cleaned the stddev data for some reason (it's
never displayed in interval mode) and the mentioned commit kept on
cleaning the stddev data in merged function, which resulted in the
stddev not being displayed.
Removing the wrong stddev data cleanup init_stats call.
Reported-and-Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org # v4.2+
Fixes: 106a94a0f8 ("perf stat: Introduce read_counters function")
Link: http://lkml.kernel.org/r/1453290995-18485-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c97cf42219 ("perf top: Live TUI Annotation")
Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The while loop was spinning. Fix by removing a semicolon.
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 035827e9f2 ("perf tests: Add Intel CQM test")
Link: http://lkml.kernel.org/r/20151214154335.GA1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds micro-benchmarks useful for tuning virtio ring layouts.
Three layouts are currently implemented:
- virtio 0.9 compatible one
- an experimental extension bypassing the ring index, polling ring
itself instead
- an experimental extension bypassing avail and used ring completely
Typical use:
sh run-on-all.sh perf stat -r 10 --log-fd 1 -- ./ring
It doesn't depend on the kernel directly, but it's handy
to have as much virtio stuff as possible in one tree.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current scripts parse console output only for cases where one CPU
detect a stall on some other CPU or task. This commit therefore adds
checks for self-detected stalls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, an error-free run produces an empty console.log.diags file.
This can be annoying when using "vi */console.log.diags" to see a full
summary of the errors. This commit therefore removes any empty files
during the analysis process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds checks for rcutorture writer starvation, so that
instances will be added to the test summary.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed through the
RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to dependencies,
acknowledged by Bruce)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5oO7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Initial roundup of 4.5 merge window patches
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed
through the RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to
dependencies, acknowledged by Bruce)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
IB/mlx5: Unify CQ create flags check
IB/mlx5: Expose Raw Packet QP to user space consumers
{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
IB/mlx5: Add Raw Packet QP query functionality
IB/mlx5: Add create and destroy functionality for Raw Packet QP
IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
IB/mlx5: Allocate a Transport Domain for each ucontext
net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
net/mlx5_core: Add RQ and SQ event handling
net/mlx5_core: Export transport objects
IB/mlx5: Expose CQE version to user-space
IB/mlx5: Add CQE version 1 support to user QPs and SRQs
IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
IB/sa: Fix netlink local service GFP crash
IB/srpt: Remove redundant wc array
IB/qib: Improve ipoib UD performance
IB/mlx4: Advertise RoCE v2 support
IB/mlx4: Create and use another QP1 for RoCEv2
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
...
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on
top of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates
of the ACPICA's copyright notices, a code fixup resulting from
a regression fix that was necessary in the upstream code only
(the regression fixed by it has never been present in Linux)
and a compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke
it on practically all architectures other than x86 and make a
couple of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether
or not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on
the problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up
a bit and update the MAINTAINERS information related to it
(Chanwoo Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas Prabhu).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=bKJ9
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"This includes fixes on top of the previous batch of PM+ACPI updates
and some new material as well.
From the new material perspective the most significant are the driver
core changes that should allow USB devices to stay suspended over
system suspend/resume cycles if they have been runtime-suspended
already beforehand. Apart from that, ACPICA is updated to upstream
revision 20160108 (cosmetic mostly, but including one fixup on top of
the previous ACPICA update) and there are some devfreq updates the
didn't make it before (due to timing).
A few recent regressions are fixed, most importantly in the cpuidle
menu governor and in the ACPI backlight driver and some x86 platform
drivers depending on it.
Some more bugs are fixed and cleanups are made on top of that.
Specifics:
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on top
of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates of
the ACPICA's copyright notices, a code fixup resulting from a
regression fix that was necessary in the upstream code only (the
regression fixed by it has never been present in Linux) and a
compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke it
on practically all architectures other than x86 and make a couple
of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether or
not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on the
problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up a
bit and update the MAINTAINERS information related to it (Chanwoo
Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas
Prabhu)"
* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
cpuidle: menu: Avoid pointless checks in menu_select()
sched / idle: Drop default_idle_call() fallback from call_cpuidle()
cpupower: Fix build error in cpufreq-info
cpuidle: Don't enable all governors by default
cpuidle: Default to ladder governor on ticking systems
time: nohz: Expose tick_nohz_enabled
ACPICA: Update version to 20160108
ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
ACPICA: Additional 2016 copyright changes
ACPICA: Reduce regression fix divergence from upstream ACPICA
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
ACPI / fan: Improve acpi_device_update_power error message
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
MAINTAINERS: Add devfreq-event entry
MAINTAINERS: Add missing git repository and directory for devfreq
...
User visible bug fixes:
- Fix reading of build-id from vDSO (Ben Hutchings)
- Fix processing samples for guests, noticed with 'perf kvm',
but noticeable as well via other tools, such as 'perf top'
(Ravi Bangoria)
Build infrastructure:
- Add feature-dump target and FEATURES_DUMP make variable, to
allow reusing the feature detection results among multiple
tools/ living codebases, such as perf and lib/bpf (Jiri Olsa)
- 'make -C tools/perf build-test' improvements, making it more
paralelizable and allowing building it outside of the source
tree, using O= (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XjpY
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf tools improvements and fixes from Arnaldo Carvalho de Melo:
User visible bug fixes:
- Fix reading of build-id from vDSO (Ben Hutchings)
- Fix processing samples for guests, noticed with 'perf kvm',
but noticeable as well via other tools, such as 'perf top'
(Ravi Bangoria)
Build infrastructure:
- Add feature-dump target and FEATURES_DUMP make variable, to
allow reusing the feature detection results among multiple
tools/ living codebases, such as perf and lib/bpf (Jiri Olsa)
- 'make -C tools/perf build-test' improvements, making it more
paralelizable and allowing building it outside of the source
tree, using O= (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix the following build error by including limits.h -
utils/cpufreq-info.c: In function ‘get_latency’:
utils/cpufreq-info.c:437:29: error: ‘UINT_MAX’ undeclared (first use in
this function)
if (!latency || latency == UINT_MAX) {
^
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Fixes: e98f033f94 (cpupower: fix how "cpupower frequency-info" interprets latency)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This 14 patch update:
- adds a new test for intel_pstate driver
- adds empty string and async test cases to
firmware class tests
- fixes and cleans up several existing tests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Vt32
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This 14 patch update:
- adds a new test for intel_pstate driver
- adds empty string and async test cases to firmware class tests
- fixes and cleans up several existing tests"
* tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: firmware: add empty string and async tests
firmware: actually return NULL on failed request_firmware_nowait()
test: firmware_class: add asynchronous request trigger
test: firmware_class: use kstrndup() where appropriate
test: firmware_class: report errors properly on failure
selftests/seccomp: fix 32-bit build warnings
add breakpoints/.gitignore
add ptrace/.gitignore
update .gitignore in selftests/timers
update .gitignore in selftests/vm
tools, testing, add test for intel_pstate driver
selftest/ipc: actually test it
selftests/capabilities: actually test it
selftests/capabilities: clean up for Makefile
- Ground work for the new Power9 MMU from Aneesh Kumar K.V
- Optimise FP/VMX/VSX context switching from Anton Blanchard
- Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica Gupta,
Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling, Andrew Donnellan
- Allow wrapper to work on non-english system from Laurent Vivier
- Add rN aliases to the pt_regs_offset table from Rashmica Gupta
- Fix module autoload for rackmeter & axonram drivers from Luis de Bethencourt
- Include KVM guest test in all interrupt vectors from Paul Mackerras
- Fix DSCR inheritance over fork() from Anton Blanchard
- Make value-returning atomics & {cmp}xchg* & their atomic_ versions fully ordered from Boqun Feng
- Print MSR TM bits in oops messages from Michael Neuling
- Add TM signal return & invalid stack selftests from Michael Neuling
- Limit EPOW reset event warnings from Vipin K Parashar
- Remove the Cell QPACE code from Rashmica Gupta
- Append linux_banner to exception information in xmon from Rashmica Gupta
- Add selftest to check if VSRs are corrupted from Rashmica Gupta
- Remove broken GregorianDay() from Daniel Axtens
- Import Anton's context_switch2 benchmark into selftests from Michael Ellerman
- Add selftest script to test HMI functionality from Daniel Axtens
- Remove obsolete OPAL v2 support from Stewart Smith
- Make enter_rtas() private from Michael Ellerman
- PPR exception cleanups from Michael Ellerman
- Add page soft dirty tracking from Laurent Dufour
- Add support for Nvlink NPUs from Alistair Popple
- Add support for kexec on 476fpe from Alistair Popple
- Enable kernel CPU dlpar from sysfs from Nathan Fontenot
- Copy only required pieces of the mm_context_t to the paca from Michael Neuling
- Add a kmsg_dumper that flushes OPAL console output on panic from Russell Currey
- Implement save_stack_trace_regs() to enable kprobe stack tracing from Steven Rostedt
- Add HWCAP bits for Power9 from Michael Ellerman
- Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
- Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
- scripts/recordmcount.pl: support data in text section on powerpc from Ulrich Weigand
- Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand
- cxl: Fix possible idr warning when contexts are released from Vaibhav Jain
- cxl: use correct operator when writing pcie config space values from Andrew Donnellan
- cxl: Fix DSI misses when the context owning task exits from Vaibhav Jain
- cxl: fix build for GCC 4.6.x from Brian Norris
- cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
- cxl: Enable PCI device ID for future IBM CXL adapter from Uma Krishnan
- Freescale updates from Scott: Highlights include moving QE code out of
arch/powerpc (to be shared with arm), device tree updates, and minor fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=R5bX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Core:
- Ground work for the new Power9 MMU from Aneesh Kumar K.V
- Optimise FP/VMX/VSX context switching from Anton Blanchard
Misc:
- Various cleanups from Krzysztof Kozlowski, John Ogness, Rashmica
Gupta, Russell Currey, Gavin Shan, Daniel Axtens, Michael Neuling,
Andrew Donnellan
- Allow wrapper to work on non-english system from Laurent Vivier
- Add rN aliases to the pt_regs_offset table from Rashmica Gupta
- Fix module autoload for rackmeter & axonram drivers from Luis de
Bethencourt
- Include KVM guest test in all interrupt vectors from Paul Mackerras
- Fix DSCR inheritance over fork() from Anton Blanchard
- Make value-returning atomics & {cmp}xchg* & their atomic_ versions
fully ordered from Boqun Feng
- Print MSR TM bits in oops messages from Michael Neuling
- Add TM signal return & invalid stack selftests from Michael Neuling
- Limit EPOW reset event warnings from Vipin K Parashar
- Remove the Cell QPACE code from Rashmica Gupta
- Append linux_banner to exception information in xmon from Rashmica
Gupta
- Add selftest to check if VSRs are corrupted from Rashmica Gupta
- Remove broken GregorianDay() from Daniel Axtens
- Import Anton's context_switch2 benchmark into selftests from
Michael Ellerman
- Add selftest script to test HMI functionality from Daniel Axtens
- Remove obsolete OPAL v2 support from Stewart Smith
- Make enter_rtas() private from Michael Ellerman
- PPR exception cleanups from Michael Ellerman
- Add page soft dirty tracking from Laurent Dufour
- Add support for Nvlink NPUs from Alistair Popple
- Add support for kexec on 476fpe from Alistair Popple
- Enable kernel CPU dlpar from sysfs from Nathan Fontenot
- Copy only required pieces of the mm_context_t to the paca from
Michael Neuling
- Add a kmsg_dumper that flushes OPAL console output on panic from
Russell Currey
- Implement save_stack_trace_regs() to enable kprobe stack tracing
from Steven Rostedt
- Add HWCAP bits for Power9 from Michael Ellerman
- Fix _PAGE_PTE breaking swapoff from Aneesh Kumar K.V
- Fix _PAGE_SWP_SOFT_DIRTY breaking swapoff from Hugh Dickins
- scripts/recordmcount.pl: support data in text section on powerpc
from Ulrich Weigand
- Handle R_PPC64_ENTRY relocations in modules from Ulrich Weigand
cxl:
- cxl: Fix possible idr warning when contexts are released from
Vaibhav Jain
- cxl: use correct operator when writing pcie config space values
from Andrew Donnellan
- cxl: Fix DSI misses when the context owning task exits from Vaibhav
Jain
- cxl: fix build for GCC 4.6.x from Brian Norris
- cxl: use -Werror only with CONFIG_PPC_WERROR from Brian Norris
- cxl: Enable PCI device ID for future IBM CXL adapter from Uma
Krishnan
Freescale:
- Freescale updates from Scott: Highlights include moving QE code out
of arch/powerpc (to be shared with arm), device tree updates, and
minor fixes"
* tag 'powerpc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (149 commits)
powerpc/module: Handle R_PPC64_ENTRY relocations
scripts/recordmcount.pl: support data in text section on powerpc
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/mm: fix _PAGE_SWP_SOFT_DIRTY breaking swapoff
powerpc/mm: Fix _PAGE_PTE breaking swapoff
cxl: Enable PCI device ID for future IBM CXL adapter
cxl: use -Werror only with CONFIG_PPC_WERROR
cxl: fix build for GCC 4.6.x
powerpc: Add HWCAP bits for Power9
powerpc/powernv: Reserve PE#0 on NPU
powerpc/powernv: Change NPU PE# assignment
powerpc/powernv: Fix update of NVLink DMA mask
powerpc/powernv: Remove misleading comment in pci.c
powerpc: Implement save_stack_trace_regs() to enable kprobe stack tracing
powerpc: Fix build break due to paca mm_context_t changes
cxl: Fix DSI misses when the context owning task exits
MAINTAINERS: Update Scott Wood's e-mail address
powerpc/powernv: Fix minor off-by-one error in opal_mce_check_early_recovery()
powerpc: Fix style of self-test config prompts
powerpc/powernv: Only delay opal_rtc_read() retry when necessary
...
All tool/utility signons.
Dual-license module header.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introducing FEATURES_DUMP make variable to provide features
detection dump file and bypass the feature detection.
The intention is to use this during build tests to skip
repeated features detection, like:
Get feature dump static build into /tmp/fd file:
$ make feature-dump FEATURE_DUMP_COPY=/tmp/fd LDFLAGS=-static
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ OFF ]
SNIP
FEATURE-DUMP file copied into /tmp/fd
Use /tmp/fd to build perf:
$ make FEATURES_DUMP=/tmp/fd LDFLAGS=-static
$ file perf
perf: ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), statically linked, for ...
Suggested-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To provide FEATURE-DUMP into $(FEATURE_DUMP_COPY) if defined, with no
further action.
Get feature dump of the current build:
$ make feature-dump
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
FEATURE-DUMP file available in FEATURE-DUMP
Get feature dump static build into /tmp/fd file:
$ make feature-dump FEATURE_DUMP_COPY=/tmp/fd LDFLAGS=-static
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ OFF ]
SNIP
FEATURE-DUMP file copied into /tmp/fd
Suggested-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kernel makefile only follows an 'O' option passed from command line
explicitely. In build-test with 'O' option set, kernel makefile
contaminate kernel source directory. Build test also fail if we don't
create output directory manually.
K_O_OPT is added and passed to kernel makefile if 'O' is passed
to build-test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If an 'O' is passed to 'make build-test', many 'test -x' and 'test -f'
will fail because perf resides in a different directory. Fix this by
computing PERF_OUT according to 'O' and test correct output files.
For make_kernelsrc and make_kernelsrc_tools, set KBUILD_OUTPUT_DIR
instead because the path is different from others ($(O)/perf vs
$(O)/tools/perf).
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unlike tools/perf/Makefile, tools/perf/Makefile.perf obey 'O' option
when it is passed through cmdline only, due to code in
tools/scripts/Makefile.include:
ifneq ($(O),)
ifeq ($(origin O), command line)
...
ABSOLUTE_O := $(shell cd $(O) ; pwd)
OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/)
endif
endif
This patch passes 'O' to Makefile.perf through cmdline explicitly
to make it follow O variable during build-test.
'make clean' should have identical 'O' option with 'make'. If not,
config-clean may error.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make build-test' is painful because of time consuming. In a full test,
all test cases are built twice with tools/perf/Makefile and
tools/perf/Makefile.perf. 'Makefile' automatically computes parallel
options for make, but 'Makefile.perf' not, so all test cases is built
with one job. It is very slow.
This patch adds '-j' options to Makefile.perf testing. It computes
parallel building options like what tools/perf/Makefile does, and pass
'-j' option to Makefile.perf test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452687442-6186-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to use the long name (the filename) when reading the build-id
from a DSO. Using the short name doesn't work for (at least) vDSOs.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160113172301.GT28542@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While recording guest samples in host using perf kvm record, it will
populate unprocessable sample error, though samples will be recorded
properly. While generating report using perf kvm report, no samples will
be processed and same error will populate. We have seen this behaviour
with upstream perf(4.4-rc3) on x86 and ppc64 hardware.
Reason behind this failure is, when it tries to fetch machine from
rb_tree of machines, it fails. As a part of tracing a bug, we figured
out that this code was incorrectly refactored in commit 54245fdc35
("perf session: Remove wrappers to machines__find").
This patch will change the functionality such that if it can't fetch
machine in first trial, it will create one node of machine and add that to
rb_tree. So next time when it tries to fetch same machine from rb_tree,
it won't fail. Actually it was the case before refactoring of code in
aforementioned commit.
This patch is generated from acme perf/core branch.
Below I've mention an example that demonstrate the behaviour before and
after applying patch.
Before applying patch:
[Note: One needs to run guest before recording data in host]
ravi@ravi-bangoria:~$ ./perf kvm record -a
Warning:
5903 unprocessable samples recorded.
Do you have a KVM guest running and not using 'perf kvm'?
[ perf record: Captured and wrote 1.409 MB perf.data.guest (285 samples) ]
ravi@ravi-bangoria:~$ ./perf kvm report --stdio
Warning:
5903 unprocessable samples recorded.
Do you have a KVM guest running and not using 'perf kvm'?
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 285 of event 'cycles'
# Event count (approx.): 88715406
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ......
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
After applying patch:
ravi@ravi-bangoria:~$ ./perf kvm record -a
[ perf record: Captured and wrote 1.188 MB perf.data.guest (17 samples) ]
ravi@ravi-bangoria:~$ ./perf kvm report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 17 of event 'cycles'
# Event count (approx.): 700746
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
34.19% :5758 [unknown] [g] 0xffffffff818682ab
22.79% :5758 [unknown] [g] 0xffffffff812dc7f8
22.79% :5758 [unknown] [g] 0xffffffff818650d0
14.83% :5758 [unknown] [g] 0xffffffff8161a1b6
2.49% :5758 [unknown] [g] 0xffffffff818692bf
0.48% :5758 [unknown] [g] 0xffffffff81869253
0.05% :5758 [unknown] [g] 0xffffffff81869250
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v3.19+
Fixes: 54245fdc35 ("perf session: Remove wrappers to machines__find")
Link: http://lkml.kernel.org/r/1449471302-11283-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 fixes from Ingo Molnar:
"Misc changes:
- fix lguest bug
- fix /proc/meminfo output on certain configs
- fix pvclock bug
- fix reboot on certain iMacs by adding new reboot quirk
- fix bootup crash
- fix FPU boot line option parsing
- add more x86 self-tests
- small cleanups, documentation improvements, etc"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Remove an unneeded condition in srat_detect_node()
x86/vdso/pvclock: Protect STABLE check with the seqcount
x86/mm: Improve switch_mm() barrier comments
selftests/x86: Test __kernel_sigreturn and __kernel_rt_sigreturn
x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
lguest: Map switcher text R/O
x86/boot: Hide local labels in verify_cpu()
x86/fpu: Disable AVX when eagerfpu is off
x86/fpu: Disable MPX when eagerfpu is off
x86/fpu: Disable XGETBV1 when no XSAVE
x86/fpu: Fix early FPU command-line parsing
x86/mm: Use PAGE_ALIGNED instead of IS_ALIGNED
selftests/x86: Disable the ldt_gdt_64 test for now
x86/mm/pat: Make split_page_count() check for empty levels to fix /proc/meminfo output
x86/boot: Double BOOT_HEAP_SIZE to 64KB
x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
Pull perf fixes from Ingo Molnar:
"Tooling fixes, the biggest patch is one that decouples the kernel's
list.h from tooling list.h"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
perf tools: Fallback to srcdir/Documentation/tips.txt
perf ui/tui: Print helpline message as is
perf tools: Set and pass DOCDIR to builtin-report.c
perf tools: Add file_only config option to strlist
perf tools: Add more usage tips
perf record: Add --buildid-all option
tools subcmd: Add missing NORETURN define for parse-options.h
tools: Fix formatting of the "make -C tools" help message
tools: Make list.h self-sufficient
perf tools: Fix mmap2 event allocation in synthesize code
perf stat: Fix recort_usage typo
perf test: Reset err after using it hold errcode in hist testcases
perf test: Fix false TEST_OK result for 'perf test hist'
tools build: Add BPF feature check to test-all
perf bpf: Fix build breakage due to libbpf
tools: Move Makefile.arch from perf/config to tools/scripts
perf tools: Fix PowerPC native building
perf tools: Fix phony build target for build-test
perf tools: Add -lutil in python lib list for broken python-config
perf tools: Add missing sources to perf's MANIFEST
...
1/ Media error handling: The 'badblocks' implementation that originated
in md-raid is up-levelled to a generic capability of a block device.
This initial implementation is limited to being consulted in the pmem
block-i/o path. Later, 'badblocks' will be consulted when creating
dax mappings.
2/ Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability to
dax-mmap a block device directly.
3/ Increased /dev/mem restrictions: Add an option to treat all io-memory
as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is
actively using an address range. This behavior is controlled via the
new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the
existing "iomem=relaxed" kernel command line option.
4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7V5r
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has appeared in -next and independently received a
build success notification from the kbuild robot. The 'for-4.5/block-
dax' topic branch was rebased over the weekend to drop the "block
device end-of-life" rework that Al would like to see re-implemented
with a notifier, and to address bug reports against the badblocks
integration.
There is pending feedback against "libnvdimm: Add a poison list and
export badblocks" received last week. Linda identified some localized
fixups that we will handle incrementally.
Summary:
- Media error handling: The 'badblocks' implementation that
originated in md-raid is up-levelled to a generic capability of a
block device. This initial implementation is limited to being
consulted in the pmem block-i/o path. Later, 'badblocks' will be
consulted when creating dax mappings.
- Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability
to dax-mmap a block device directly.
- Increased /dev/mem restrictions: Add an option to treat all
io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
while a driver is actively using an address range. This behavior
is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
overridden by the existing "iomem=relaxed" kernel command line
option.
- Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes"
* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
block: kill disk_{check|set|clear|alloc}_badblocks
libnvdimm, pmem: nvdimm_read_bytes() badblocks support
pmem, dax: disable dax in the presence of bad blocks
pmem: fail io-requests to known bad blocks
libnvdimm: convert to statically allocated badblocks
libnvdimm: don't fail init for full badblocks list
block, badblocks: introduce devm_init_badblocks
block: clarify badblocks lifetime
badblocks: rename badblocks_free to badblocks_exit
libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
libnvdimm: Add a poison list and export badblocks
nfit_test: Enable DSMs for all test NFITs
md: convert to use the generic badblocks code
block: Add badblock management for gendisks
badblocks: Add core badblock management code
block: fix del_gendisk() vs blkdev_ioctl crash
block: enable dax for raw block devices
block: introduce bdev_file_inode()
restrict /dev/mem to idle io memory ranges
arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
...
A quiet release for SPI, not even many driver updates:
- Add a dummy loopback driver for use in exercising framework features
during development.
- Move the test utilities to tools/ and add support for transferring
data to and from a file instead of stdin and stdout to spidev_test.
- Support for Mediatek MT2701 and Renesas AG5 deices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlNpkAAoJECTWi3JdVIfQ2rkH/j8fhCJVAGIkFs49+jk/+ZBR
NsvUEnPae9+e7vx/UBFNFJrM/1cpqy5VhDSbl/UnJLnOwiOOGeOR5H7S6YgDcW8m
gwgeCUJU5eqXx1tAuLJrD/qLya8uQQC6XaSlT2Du2Zr15EZ7tUvlRTva9M2nRQCC
OBo6f0FY+ptv/aNL7ME1WY5T4uQJC1FqRfvj0Cle1ZC8A1gONPoI7WLPasMckBEX
g9q76OUxLZ/I9CASUGbJYMtq/eBca5kq+dPcFLPfNTKKJk98TgRcJHzT+NW9igo2
D5r/pcsv8pt6H0Q2df8nkRzfvM/EPk/5VAYVJAxCogelKnqVaI8wlc6P7Rq5Mz0=
=0Z1l
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A quiet release for SPI, not even many driver updates:
- Add a dummy loopback driver for use in exercising framework
features during development.
- Move the test utilities to tools/ and add support for transferring
data to and from a file instead of stdin and stdout to spidev_test.
- Support for Mediatek MT2701 and Renesas AG5 deices"
* tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
spi: loopback: fix typo in MODULE_PARM_DESC
spi: sun4i: Prevent chip-select from being activated twice before a transfer
spi: loopback-test: spi_check_rx_ranges can get always done
spi: loopback-test: rename method spi_test_fill_tx to spi_test_fill_pattern
spi: loopback-test: write rx pattern also when running without tx_buf
spi: fsl-espi: expose maximum transfer size limit
spi: expose master transfer size limitation.
spi: zynq: use to_platform_device()
spi: cadence: use to_platform_device()
spi: mediatek: Add spi support for mt2701 IC
spi: mediatek: merge all identical compat to mtk_common_compat
spi: mtk: Add bindings for mediatek MT2701 soc platform
spi: mediatek: Prevent overflows in FIFO transfers
spi: s3c64xx: Remove unused platform_device_id entries
spi: use to_spi_device
spi: dw: Use SPI_TMOD_TR rather than magic const 0 to set tmode
spi: imx: defer spi initialization, if DMA engine is
spi: imx: return error from dma channel request
spi: imx: enable loopback only for ECSPI controller family
spi: imx: fix loopback mode setup after controller reset
...
Here's the big set of char/misc patches for 4.5-rc1.
Nothing major, lots of different driver subsystem updates, full details
in the shortlog. All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlaV0GsACgkQMUfUDdst+ymlPgCg07GSc4SOWlUL2V36vQ0kucoO
YjAAoMfeUEhsf/NJ7iaAMGQVUQKuYVqr
=BlqH
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here's the big set of char/misc patches for 4.5-rc1.
Nothing major, lots of different driver subsystem updates, full
details in the shortlog. All of these have been in linux-next for a
while"
* tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (71 commits)
mei: fix fasync return value on error
parport: avoid assignment in if
parport: remove unneeded space
parport: change style of NULL comparison
parport: remove unnecessary out of memory message
parport: remove braces
parport: quoted strings should not be split
parport: code indent should use tabs
parport: fix coding style
parport: EXPORT_SYMBOL should follow function
parport: remove trailing white space
parport: fix a trivial typo
coresight: Fix a typo in Kconfig
coresight: checking for NULL string in coresight_name_match()
Drivers: hv: vmbus: Treat Fibre Channel devices as performance critical
Drivers: hv: utils: fix hvt_op_poll() return value on transport destroy
Drivers: hv: vmbus: fix the building warning with hyperv-keyboard
extcon: add Maxim MAX3355 driver
Drivers: hv: ring_buffer: eliminate hv_ringbuffer_peek()
Drivers: hv: remove code duplication between vmbus_recvpacket()/vmbus_recvpacket_raw()
...
The vdso-based sigreturn mechanism is fragile and isn't used by
modern glibc so, if we break it, we'll only notice when someone
tests an unusual libc.
Add an explicit selftest.
[ I wrote this while debugging a Bionic breakage -- my first guess
was that I had somehow messed up sigreturn. I've caused problems in
that code before, and it's really easy to fail to notice it because
there's nothing on a modern distro that needs vdso-based sigreturn. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/32946d714156879cd8e5d8eab044cd07557ed558.1452628504.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Add a debugfs-based interface for interacting with the ACPICA's
AML debugger introduced in the previous cycle and a new user
space tool for that, fix some bugs related to the AML debugger
and clean up the code in question (Lv Zheng, Dan Carpenter,
Colin Ian King, Markus Elfring).
- Update ACPICA to upstream revision 20151218 including a number
of fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng,
Labbe Corentin, Prarit Bhargava, Colin Ian King, David E Box,
Rafael Wysocki).
In particular, the previously added erroneous support for the
_SUB object is dropped, the concatenate operator will support
all ACPI objects now, the Debug Object handling is improved,
the SuperName handling of parameters being control methods is
fixed, the ObjectType operator handling is updated to follow
ACPI 5.0A and the handling of CondRefOf and RefOf is updated
accordingly, module-level code will be executed after loading
each ACPI table now (instead of being run once after all tables
containing AML have been loaded), the Operation Region handlers
management is updated to fix some reported problems and a the
ACPICA code in the kernel is more in line with the upstream
now.
- Update the ACPI backlight driver to provide information on
whether or not it will generate key-presses for brightness
change hotkeys and update some platform drivers (dell-wmi,
thinkpad_acpi) to use that information to avoid sending double
key-events to users pace for these, add new ACPI backlight
quirks (Hans de Goede, Aaron Lu, Adrien Schildknecht).
- Improve the ACPI handling of interrupt GPIOs (Christophe Ricard).
- Fix the handling of the list of device IDs of device objects
found in the ACPI namespace and add a helper for checking if
there is a device object for a given device ID (Lukas Wunner).
- Change the logic in the ACPI namespace scanning code to create
struct acpi_device objects for all ACPI device objects found in
the namespace even if _STA fails for them which helps to avoid
device enumeration problems on Microsoft Surface 3 (Aaron Lu).
- Add support for the APM X-Gene ACPI I2C device to the ACPI
driver for AMD SoCs (Loc Ho).
- Fix the long-standing issue with the DMA controller on Intel
SoCs where ACPI tables have no power management support for
the DMA controller itself, but it can be powered off automatically
when the last (other) device on the SoC is powered off via ACPI
and clean up the ACPI driver for Intel SoCs (acpi-lpss) after
previous attempts to fix that problem (Andy Shevchenko).
- Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King,
Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki,
Sinan Kaya).
- Update the device properties framework for better handling of
built-in properties, add support for built-in properties to
the platform bus type, update the MFD subsystem's handling
of device properties and add support for passing default
configuration data as device properties to the intel-lpss MFD
drivers, convert the designware I2C driver to use the unified
device properties API and add a fallback mechanism for using
default built-in properties if the platform firmware fails
to provide the properties as expected by drivers (Andy Shevchenko,
Mika Westerberg, Heikki Krogerus, Andrew Morton).
- Add new Device Tree bindings to the Operating Performance Points
(OPP) framework and update the exynos4412 DT binding accordingly,
introduce debugfs support for the OPP framework (Viresh Kumar,
Bartlomiej Zolnierkiewicz).
- Migrate the mt8173 cpufreq driver to the new OPP bindings
(Pi-Cheng Chen).
- Update the cpufreq core to make the handling of governors
more efficient, especially on systems where policy objects
are shared between multiple CPUs (Viresh Kumar, Rafael Wysocki).
- Fix cpufreq governor handling on configurations with
CONFIG_HZ_PERIODIC set (Chen Yu).
- Clean up the cpufreq core code related to the boost sysfs knob
support and update the ACPI cpufreq driver accordingly (Rafael
Wysocki).
- Add a new cpufreq driver for ST platforms and corresponding
Device Tree bindings (Lee Jones).
- Update the intel_pstate driver to allow the P-state selection
algorithm used by it to depend on the CPU ID of the processor it
is running on, make it use a special P-state selection algorithm
(with an IO wait time compensation tweak) on Atom CPUs based on
the Airmont and Silvermont cores so as to reduce their energy
consumption and improve intel_pstate documentation (Philippe
Longepe, Srinivas Pandruvada).
- Update the cpufreq-dt driver to support registering cooling
devices that use the (P * V^2 * f) dynamic power draw formula
where V is the voltage, f is the frequency and P is a constant
coefficient provided by Device Tree and update the arm_big_little
cpufreq driver to use that support (Punit Agrawal).
- Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq,
blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia,
Jacob Tanenbaum, Markus Elfring).
- cpuidle core tweaks related to polling and measured_us
calculation (Rik van Riel).
- Removal of modularity from a few cpuidle drivers (clps711x,
ux500, exynos) that cannot be built as modules in practice
(Paul Gortmaker).
- PM core update to prevent devices from being probed during
system suspend/resume which is generally problematic and may
lead to inconsistent behavior (Grygorii Strashko).
- Assorted updates of the PM core and related code (Julia Lawall,
Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki,
Ulf Hansson).
- PNP bus type updates (Christophe Le Roy, Heiner Kallweit).
- PCI PM code cleanups (Jarkko Nikula, Julia Lawall).
- cpupower tool updates (Jacob Tanenbaum, Thomas Renninger).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OlYA
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull oower management and ACPI updates from Rafael Wysocki:
"As far as the number of commits goes, ACPICA takes the lead this time,
followed by cpufreq and the device properties framework changes.
The most significant new feature is the debugfs-based interface to the
ACPICA's AML debugger added in the previous cycle and a new user space
tool for accessing it.
On the cpufreq front, the core is updated to handle governors more
efficiently, particularly on systems where a single cpufreq policy
object is shared between multiple CPUs, and there are quite a few
changes in drivers (intel_pstate, cpufreq-dt etc).
The device properties framework is updated to handle built-in (ie
included in the kernel itself) device properties better, among other
things by adding a fallback mechanism that will allow drivers to
provide default properties to be used in case the plaform firmware
doesn't provide the properties expected by them.
The Operating Performance Points (OPP) framework gets new DT bindings
and debugfs support.
A new cpufreq driver for ST platforms is added and the ACPI driver for
AMD SoCs will now support the APM X-Gene ACPI I2C device.
The rest is mostly fixes and cleanups all over.
Specifics:
- Add a debugfs-based interface for interacting with the ACPICA's AML
debugger introduced in the previous cycle and a new user space tool
for that, fix some bugs related to the AML debugger and clean up
the code in question (Lv Zheng, Dan Carpenter, Colin Ian King,
Markus Elfring).
- Update ACPICA to upstream revision 20151218 including a number of
fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe
Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael
Wysocki).
In particular, the previously added erroneous support for the _SUB
object is dropped, the concatenate operator will support all ACPI
objects now, the Debug Object handling is improved, the SuperName
handling of parameters being control methods is fixed, the
ObjectType operator handling is updated to follow ACPI 5.0A and the
handling of CondRefOf and RefOf is updated accordingly, module-
level code will be executed after loading each ACPI table now
(instead of being run once after all tables containing AML have
been loaded), the Operation Region handlers management is updated
to fix some reported problems and a the ACPICA code in the kernel
is more in line with the upstream now.
- Update the ACPI backlight driver to provide information on whether
or not it will generate key-presses for brightness change hotkeys
and update some platform drivers (dell-wmi, thinkpad_acpi) to use
that information to avoid sending double key-events to users pace
for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu,
Adrien Schildknecht).
- Improve the ACPI handling of interrupt GPIOs (Christophe Ricard).
- Fix the handling of the list of device IDs of device objects found
in the ACPI namespace and add a helper for checking if there is a
device object for a given device ID (Lukas Wunner).
- Change the logic in the ACPI namespace scanning code to create
struct acpi_device objects for all ACPI device objects found in the
namespace even if _STA fails for them which helps to avoid device
enumeration problems on Microsoft Surface 3 (Aaron Lu).
- Add support for the APM X-Gene ACPI I2C device to the ACPI driver
for AMD SoCs (Loc Ho).
- Fix the long-standing issue with the DMA controller on Intel SoCs
where ACPI tables have no power management support for the DMA
controller itself, but it can be powered off automatically when the
last (other) device on the SoC is powered off via ACPI and clean up
the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts
to fix that problem (Andy Shevchenko).
- Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King,
Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki,
Sinan Kaya).
- Update the device properties framework for better handling of
built-in properties, add support for built-in properties to the
platform bus type, update the MFD subsystem's handling of device
properties and add support for passing default configuration data
as device properties to the intel-lpss MFD drivers, convert the
designware I2C driver to use the unified device properties API and
add a fallback mechanism for using default built-in properties if
the platform firmware fails to provide the properties as expected
by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus,
Andrew Morton).
- Add new Device Tree bindings to the Operating Performance Points
(OPP) framework and update the exynos4412 DT binding accordingly,
introduce debugfs support for the OPP framework (Viresh Kumar,
Bartlomiej Zolnierkiewicz).
- Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng
Chen).
- Update the cpufreq core to make the handling of governors more
efficient, especially on systems where policy objects are shared
between multiple CPUs (Viresh Kumar, Rafael Wysocki).
- Fix cpufreq governor handling on configurations with
CONFIG_HZ_PERIODIC set (Chen Yu).
- Clean up the cpufreq core code related to the boost sysfs knob
support and update the ACPI cpufreq driver accordingly (Rafael
Wysocki).
- Add a new cpufreq driver for ST platforms and corresponding Device
Tree bindings (Lee Jones).
- Update the intel_pstate driver to allow the P-state selection
algorithm used by it to depend on the CPU ID of the processor it is
running on, make it use a special P-state selection algorithm (with
an IO wait time compensation tweak) on Atom CPUs based on the
Airmont and Silvermont cores so as to reduce their energy
consumption and improve intel_pstate documentation (Philippe
Longepe, Srinivas Pandruvada).
- Update the cpufreq-dt driver to support registering cooling devices
that use the (P * V^2 * f) dynamic power draw formula where V is
the voltage, f is the frequency and P is a constant coefficient
provided by Device Tree and update the arm_big_little cpufreq
driver to use that support (Punit Agrawal).
- Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq,
blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob
Tanenbaum, Markus Elfring).
- cpuidle core tweaks related to polling and measured_us calculation
(Rik van Riel).
- Removal of modularity from a few cpuidle drivers (clps711x, ux500,
exynos) that cannot be built as modules in practice (Paul
Gortmaker).
- PM core update to prevent devices from being probed during system
suspend/resume which is generally problematic and may lead to
inconsistent behavior (Grygorii Strashko).
- Assorted updates of the PM core and related code (Julia Lawall,
Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf
Hansson).
- PNP bus type updates (Christophe Le Roy, Heiner Kallweit).
- PCI PM code cleanups (Jarkko Nikula, Julia Lawall).
- cpupower tool updates (Jacob Tanenbaum, Thomas Renninger)"
* tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (177 commits)
PM / clk: don't leave clocks enabled when driver not bound
i2c: dw: Add APM X-Gene ACPI I2C device support
ACPI / APD: Add APM X-Gene ACPI I2C device support
ACPI / LPSS: change 'does not have' to 'has' in comment
Revert "dmaengine: dw: platform: provide platform data for Intel"
dmaengine: dw: return immediately from IRQ when DMA isn't in use
dmaengine: dw: platform: power on device on shutdown
ACPI / LPSS: override power state for LPSS DMA device
PM / OPP: Use snprintf() instead of sprintf()
Documentation: cpufreq: intel_pstate: enhance documentation
ACPI, PCI, irq: remove redundant check for null string pointer
ACPI / video: driver must be registered before checking for keypresses
cpufreq-dt: fix handling regulator_get_voltage() result
cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC
PM / sleep: Add support for read-only sysfs attributes
ACPI: Fix white space in a structure definition
ACPI / SBS: fix inconsistent indenting inside if statement
PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching
ACPI / PNP: constify device IDs
ACPI / PCI: Simplify acpi_penalize_isa_irq()
...
minor fixes.
Here's what else is new:
o A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
o New selftest to test the instance create and delete
o Better debug output when ftrace fails
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlU8tAAoJEKKk/i67LK/8JckH/2XIhjwMunm35uCg1308sDqy
d44G3+p0pm8ztjBf8iD8wH2nP3m7z+nC8JBmSPIUgAHsKOYHWsBy2A/36OVWv5lK
1hVXvBwOuZXnyWXr7bC2RO9S9f9acSFaabZXWDi1BCJRJSgEcknz32V7ZAL4jOCO
SfBWBNrWJfUsURbfbElfVxPLArvyUg9Bb5dW5B+QFf6PuoJaORYzNLYXHlbsq++T
WlrlnD+mFZ/DKFZ/gl3FMSGMPaGimw09/3eqMzv/tLQobp6PbCWlJTwjUoxJ/9dO
XOY4sWUrUUZilU8qCk0i0ZSEumWmE+SWS3eq+Ef18B/5haIj/LkoM4UQD3h2Rc4=
=FDR+
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Not much new with tracing for this release. Mostly just clean ups and
minor fixes.
Here's what else is new:
- A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
- New selftest to test the instance create and delete
- Better debug output when ftrace fails"
* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
ftrace: Fix the race between ftrace and insmod
ftrace: Add infrastructure for delayed enabling of module functions
x86: ftrace: Fix the comments for ftrace_modify_code_direct()
tracing: Fix comment to use tracing_on over tracing_enable
metag: ftrace: Fix the comments for ftrace_modify_code
sh: ftrace: Fix the comments for ftrace_modify_code()
ia64: ftrace: Fix the comments for ftrace_modify_code()
ftrace: Clean up ftrace_module_init() code
ftrace: Join functions ftrace_module_init() and ftrace_init_module()
tracing: Introduce TRACE_EVENT_FN_COND macro
tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
bpf: Constify bpf_verifier_ops structure
ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
ftrace: Remove use of control list and ops
ftrace: Fix output of enabled_functions for showing tramp
ftrace: Fix a typo in comment
ftrace: Show all tramps registered to a record on ftrace_bug()
ftrace: Add variable ftrace_expected for archs to show expected code
ftrace: Add new type to distinguish what kind of ftrace_bug()
tracing: Update cond flag when enabling or disabling a trigger
...
Pull networking updates from Davic Miller:
1) Support busy polling generically, for all NAPI drivers. From Eric
Dumazet.
2) Add byte/packet counter support to nft_ct, from Floriani Westphal.
3) Add RSS/XPS support to mvneta driver, from Gregory Clement.
4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
Frederic Sowa.
5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.
6) Add support for VLAN device bridging to mlxsw switch driver, from
Ido Schimmel.
7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.
8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.
9) Reorganize wireless drivers into per-vendor directories just like we
do for ethernet drivers. From Kalle Valo.
10) Provide a way for administrators "destroy" connected sockets via the
SOCK_DESTROY socket netlink diag operation. From Lorenzo Colitti.
11) Add support to add/remove multicast routes via netlink, from Nikolay
Aleksandrov.
12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.
13) Add forwarding and packet duplication facilities to nf_tables, from
Pablo Neira Ayuso.
14) Dead route support in MPLS, from Roopa Prabhu.
15) TSO support for thunderx chips, from Sunil Goutham.
16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.
17) Rationalize, consolidate, and more completely document the checksum
offloading facilities in the networking stack. From Tom Herbert.
18) Support aborting an ongoing scan in mac80211/cfg80211, from
Vidyullatha Kanchanapally.
19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
net: bnxt: always return values from _bnxt_get_max_rings
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
phy: remove an unneeded condition
mdio: remove an unneed condition
mdio_bus: NULL dereference on allocation error
net: Fix typo in netdev_intersect_features
net: freescale: mac-fec: Fix build error from phy_device API change
net: freescale: ucc_geth: Fix build error from phy_device API change
bonding: Prevent IPv6 link local address on enslaved devices
IB/mlx5: Add flow steering support
net/mlx5_core: Export flow steering API
net/mlx5_core: Make ipv4/ipv6 location more clear
net/mlx5_core: Enable flow steering support for the IB driver
net/mlx5_core: Initialize namespaces only when supported by device
net/mlx5_core: Set priority attributes
net/mlx5_core: Connect flow tables
net/mlx5_core: Introduce modify flow table command
net/mlx5_core: Managing root flow table
...
Pull UML updates from Richard Weinberger:
"This contains beside of random fixes/cleanups two bigger changes:
- seccomp support by Mickaël Salaün
- IRQ rework by Anton Ivanov"
* 'for-linus-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Use race-free temporary file creation
um: Do not set unsecure permission for temporary file
um: Fix build error and kconfig for i386
um: Add seccomp support
um: Add full asm/syscall.h support
selftests/seccomp: Remove the need for HAVE_ARCH_TRACEHOOK
um: Fix ptrace GETREGS/SETREGS bugs
um: link with -lpthread
um: Update UBD to use pread/pwrite family of functions
um: Do not change hard IRQ flags in soft IRQ processing
um: Prevent IRQ handler reentrancy
uml: flush stdout before forking
uml: fix hostfs mknod()
Some people don't install perf, but just use compiled version in the
source. Fallback to lookup the source directory for those poor guys. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452334589-8782-4-git-send-email-namhyung@kernel.org
[ Make perf_tip() return NULL for ENOENT, making the fallback to really take place ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a tip message contains a percent sign, it was treated printf format
specifier so broken string was printed like below.
Tip: Limit to show entries above 577nly: perf report --percent-limit 5
^^^
As ui_browser__show receives format string, pass additional "%s" so that
the help (tip) message can be printed as is.
Tip: Limit to show entries above 5% only: perf report --percent-limit 5
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509594-13616-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used to locate perf document directory to find tips.txt in case
it's not installed on the system.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452334589-8782-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If strlist_config.dirname is present, the strlist__new() tries to load
stirngs from dirname/list file first but if it failes it falls back to
add 'list' as string. But sometimes it's not desired so adds new
file_only field to prevent it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452334589-8782-2-git-send-email-namhyung@kernel.org
[ Add documentation for strlist_config::file_only, in the struct definition */
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --buildid-all option is to record build-id of all DSOs in the file.
It might be very costly to postprocess samples to find which DSO hits.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1452519429-31779-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
parse-options.h uses the NORETURN macro without defining it. perf
doesn't see a build error because it defines the macro in util.h before
including parse-options.h. But any other tool including it will see an
error.
Define the macro in parse-options.h (if not already defined) so that
other tools can include it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/6c16294ac6dbe5e2ca28fd935fe4389996588564.1450442274.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Align the x86_energy_perf_policy line with the others and restore the
original alphabetical sorting.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/572931227adbf1fc9ca96e1dae3ef2e89387feca.1450442274.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7f5f873c6a ("rculist: Use WRITE_ONCE() when deleting from
reader-visible list") added the use of the WRITE_ONCE macro to the
kernel version of list.h, which broke the stacktool build because the
tools list.h includes the kernel list.h.
Avoid this type of situation in the future and make list.h
self-sufficient by copying the kernel list.h routines directly into
tools list.h.
This is a straight copy except for adjustments to the include statements
and copying of the tools-specific list routines (list_del_range and
list_for_each_from).
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/59cdc19c6589d1b5ef43d83b0e2d5a4a40301374.1450442274.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event__synthesize_mmap_events() issues mmap2 events, but the memory
of that event is allocated using:
mmap_event = malloc(sizeof(mmap_event->mmap) + machine->id_hdr_size);
If path of mmap source file is long (near PATH_MAX), random crash would
happen. Should use sizeof(mmap_event->mmap2).
Fix two memory allocations.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452593524-138970-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Markus reported gcc 6 complains when compiling perf stat command:
builtin-stat.c:1591:27: error: ‘recort_usage’ defined but not used
[-Werror=unused-const-variable]
static const char * const recort_usage[] = {
^~~~~~~~~~~~
I fixed the typo and realized we already export record_usage, so I also
prefixed it with stat (and included report_usage).
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452591329-27620-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ldt_gdt.c relies on cross-cpu invalidation of SS to do one of
its tests. On 32-bit builds, this works fine, but on 64-bit
builds, it only works if the kernel has proper SS sigcontext
handling for 64-bit user programs.
Since the SS fixes are currently reverted, restrict the test
case to 32 bits for now.
In principle, I could change the test to use a different segment
register, but it would be messy: CS can't point to the LDT for
64-bit code, and the other registers don't result in immediate
faults because they aren't reloaded on kernel -> user
transitions.
When we fix sigcontext (in 4.6?), we can revert this.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/231591d9122d282402d8f53175134f8db5b3bc73.1452561752.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Developer stuff:
- Fix a few clean targets in tools/ (Jiri Olsa)
- Add missing sources to perf's MANIFEST, fixing the out of tree build with
'make perf-tar*-src-pkg' tarballs (Jiri Olsa)
- Fix bpf related build problems in PowerPC (Naveen N. Rao, Wang Nan)
- 'make -C tools/perf build-test' fixes (Wang Nan)
- Fix 'perf test hist' entry (Wang Nan)
- Add BPF feature check to test-all, as in an environment with all other
features enabled, BPF would be considered enabled without doing real
feature check. (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KaRk
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
" - Fix a few clean targets in tools/ (Jiri Olsa)
- Add missing sources to perf's MANIFEST, fixing the out of tree build with
'make perf-tar*-src-pkg' tarballs (Jiri Olsa)
- Fix bpf related build problems in PowerPC (Naveen N. Rao, Wang Nan)
- 'make -C tools/perf build-test' fixes (Wang Nan)
- Fix 'perf test hist' entry (Wang Nan)
- Add BPF feature check to test-all, as in an environment with all other
features enabled, BPF would be considered enabled without doing real
feature check. (Wang Nan)"
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull in fixes from Daniel Lezcano:
- Fix the vt8500 timer leading to a system lock up when dealing with too
small delta (Roman Volkov)
- Select the CLKSRC_MMIO when the fsl_ftm_timer is enabled with COMPILE_TEST
(Daniel Lezcano)
- Prevent to compile timers using the 'iomem' API when the architecture has
not HAS_IOMEM set (Richard Weinberger)
Pull timer updates - and a leftover fix - from Thomas Gleixner:
"A rather large (commit wise) update from the timer side:
- A bulk update to make compile tests work in the clocksource drivers
- An overhaul of the h8300 timers
- Some more Y2038 work
- A few overflow prevention checks in the timekeeping/ntp code
- The usual pile of fixes and improvements to the various
clocksource/clockevent drivers and core code"
Also:
"A single fix for the posix-clock poll code which did not make it into
4.4"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
clocksource/drivers/acpi_pm: Convert to pr_* macros
clocksource: Make clocksource validation work for all clocksources
timekeeping: Cap adjustments so they don't exceed the maxadj value
ntp: Fix second_overflow's input parameter type to be 64bits
ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds
timekeeping: Provide internal function __ktime_get_real_seconds
clocksource/drivers/h8300: Use ioread / iowrite
clocksource/drivers/h8300: Initializer cleanup.
clocksource/drivers/h8300: Simplify delta handling
clocksource/drivers/h8300: Fix timer not overflow case
clocksource/drivers/h8300: Change to overflow interrupt
clocksource/drivers/lpc32: Correct pr_err() output format
clocksource/drivers/arm_global_timer: Fix suspend resume
clocksource/drivers/pistachio: Fix wrong calculated clocksource read value
clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set
clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel
clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path
clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
clocksource/drivers/h8300: Increase the compilation test coverage
...
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-clock: Fix return code on the poll method's error path
* pm-sleep:
PM / sleep: Add support for read-only sysfs attributes
* pm-tools:
cpupower: fix how "cpupower frequency-info" interprets latency
cpupower: rework the "cpupower frequency-info" command
cpupower: Do not analyse offlined cpus
cpupower: Provide STATIC variable in Makefile for debug builds
cpupower: Fix precedence issue
* acpica: (43 commits)
ACPICA: Drop Linux-specific waking vector functions
ACPICA: Update version to 20151218
ACPICA: Add per-table execution of module-level code
ACPICA: Add "root node" case to the ACPI name repair code
ACPICA: Events: Introduce ACPI_REG_DISCONNECT invocation to acpi_ev_execute_reg_methods()
ACPICA: Events: Enhance acpi_ev_execute_reg_method() to ensure no _REG evaluations can happen during OS early boot stages
ACPICA: Events: Split acpi_ev_associate_reg_method() from region initialization code
ACPICA: Events: Fix an issue that region object is re-attached to another scope when it is already attached
ACPICA: Utilities: Reorder initialization code
ACPICA: Events: Uses common_notify for address space handlers
ACPICA: Events: Deploys acpi_ev_find_region_handler()
ACPICA: Cleanup code related to the per-table module level improvement
ACPICA: Update for CondRefOf and RefOf operators
ACPICA: Update internal #defines for ObjectType operator. No functional change
ACPICA: Update parameter type for ObjectType operator
ACPICA: Parser: Fix for SuperName method invocation
ACPICA: Parser: Add constants for internal namepath function
ACPICA: iasl/Disassembler: Support ASL ElseIf operator
ACPICA: Add new exception code, AE_IO_ERROR
ACPICA: Tools: Add spacing and missing options in acpibin tool
...
* acpi-debug:
ACPI / debugger: Fix a redundant mutex unlock issue in acpi_aml_open()
ACPI / debugger: copy_to_user doesn't return errors
ACPI / debugger: remove some unneeded conditions
ACPI / debugger: Fix an issue a flag is modified without locking
ACPI / debugger: Add module support for ACPI debugger
tools/power/acpi: Add userspace AML interface support
ACPI / debugger: Add IO interface to access debugger functionalities
ACPICA: Debugger: Fix runtime stub issues of ACPI_DEBUGGER_EXEC using different stub mechanism
ACPICA: Debugger: Convert some mechanisms to OSPM specific
ACPICA: Debugger: Remove unnecessary status check
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Intel Knights Landing support. (Harish Chegondi)
- Intel Broadwell-EP uncore PMU support. (Kan Liang)
- Core code improvements. (Peter Zijlstra.)
- Event filter, LBR and PEBS fixes. (Stephane Eranian)
- Enable cycles:pp on Intel Atom. (Stephane Eranian)
- Add cycles:ppp support for Skylake. (Andi Kleen)
- Various x86 NMI overhead optimizations. (Andi Kleen)
- Intel PT enhancements. (Takao Indoh)
- AMD cache events fix. (Vince Weaver)
Tons of tooling changes:
- Show random perf tool tips in the 'perf report' bottom line
(Namhyung Kim)
- perf report now defaults to --group if the perf.data file has
grouped events, try it with:
# perf record -e '{cycles,instructions}' -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ]
# perf report
# Samples: 1K of event 'anon group { cycles, instructions }'
# Event count (approx.): 1955219195
#
# Overhead Command Shared Object Symbol
2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle
1.05% 0.33% firefox libxul.so [.] js::SetObjectElement
1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno
0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab
0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1>
0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay
0.62% 1.27% firefox libxul.so [.] js::GetIterator
0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty
0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining
- Introduce the 'perf stat record/report' workflow:
Generate perf.data files from 'perf stat', to tap into the
scripting capabilities perf has instead of defining a 'perf stat'
specific scripting support to calculate event ratios, etc.
Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to
not generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
- Make command line options always available, even when they depend
on some feature being enabled, warning the user about use of such
options (Wang Nan)
- Support hw breakpoint events (mem:0xAddress) in the default output
mode in 'perf script' (Wang Nan)
- Fixes and improvements for supporting annotating ARM binaries,
support ARM call and jump instructions, more work needed to have
arch specific stuff separated into tools/perf/arch/*/annotate/
(Russell King)
- Add initial 'perf config' command, for now just with a --list
command to the contents of the configuration file in use and a
basic man page describing its format, commands for doing edits and
detailed documentation are being reviewed and proof-read. (Taeung
Song)
- Allows BPF scriptlets specify arguments to be fetched using DWARF
info, using a prologue generated at compile/build time (He Kuang,
Wang Nan)
- Allow attaching BPF scriptlets to module symbols (Wang Nan)
- Allow attaching BPF scriptlets to userspace code using uprobe (Wang
Nan)
- BPF programs now can specify 'perf probe' tunables via its section
name, separating key=val values using semicolons (Wang Nan)
Testing some of these new BPF features:
Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.
# cat ssl.bpf.c
#define SEC(NAME) __attribute__((section(NAME), used))
struct pt_regs;
SEC("func=__inet_lookup_established hnum")
int func(struct pt_regs *ctx, int err, unsigned short port)
{
return err == 0 && port == 443;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf record -a -g -e ssl.bpf.c
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
# perf script | head -30
swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
430a br_handle_frame_finish ([bridge])
48bc br_handle_frame ([bridge])
855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
#
- Use 'perf probe' various options to list functions, see what
variables can be collected at any given point, experiment first
collecting without a filter, then filter, use it together with
'perf trace', 'perf top', with or without callchains, if it
explodes, please tell us!
- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry,
facilitating 'perf report' output processing by other tools, such
as Brendan Gregg's flamegraph tools (Namhyung Kim)
E.g:
# perf report | grep -v ^# | head
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--12.07%--start_secondary
|
--6.30%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
#
Becomes, in "folded" mode:
# perf report -g folded | grep -v ^# | head -5
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
12.07% cpu_startup_entry;start_secondary
6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle
11.23% call_cpuidle;cpu_startup_entry;start_secondary
5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter
11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state
#
The user can also select one of "count", "period" or "percent" as
the first column.
... and lots of infrastructure enhancements, plus fixes and other
changes, features I failed to list - see the shortlog and the git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits)
perf evlist: Add --trace-fields option to show trace fields
perf record: Store data mmaps for dwarf unwind
perf libdw: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Use find_map function in access_dso_mem
perf evlist: Remove perf_evlist__(enable|disable)_event functions
perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
perf report: Show random usage tip on the help line
perf hists: Export a couple of hist functions
perf diff: Use perf_hpp__register_sort_field interface
perf tools: Add overhead/overhead_children keys defaults via string
perf tools: Remove list entry from struct sort_entry
perf tools: Include all tools/lib directory for tags/cscope/TAGS targets
perf script: Align event name properly
perf tools: Add missing headers in perf's MANIFEST
perf tools: Do not show trace command if it's not compiled in
perf report: Change default to use event group view
perf top: Decay periods in callchains
tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/
tools lib: Sync tools/lib/find_bit.c with the kernel
...
All hists test cases forget to reset err after using it to hold an
error code. If error occure in setup_fake_machine() it incorrectly
return TEST_OK.
This patch fixes it.
Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-13-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 71d6de64fe ("perf test: Fix hist testcases when kptr_restrict is on")
solves a double free problem when 'perf test hist' calling
setup_fake_machine(). However, the result is still incorrect. For example:
$ ./perf test -v 'filtering hist entries'
25: Test filtering hist entries :
--- start ---
test child forked, pid 4186
Cannot create kernel maps
test child finished with 0
---- end ----
Test filtering hist entries: Ok
In this case the body of this test is not get executed at all, but the
result is 'Ok'.
Actually, in setup_fake_machine() there's no need to create real kernel
maps. What we want are the fake maps. This patch removes the
machine__create_kernel_maps() in setup_fake_machine(), so it won't be
affected by kptr_restrict setting.
Test result:
$ cat /proc/sys/kernel/kptr_restrict
1
$ ~/perf test -v hist
15: Test matching and linking multiple hists :
--- start ---
test child forked, pid 24031
test child finished with 0
---- end ----
Test matching and linking multiple hists: Ok
[SNIP]
Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test-all.c file doesn't check BPF related features. For an
environment with all other features enabled, BPF would be considered
enabled without doing real feature check.
This patch adds test-bpf.c into test-all.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf build is currently (v4.4-rc5) broken on powerpc:
bpf.c:28:4: error: #error __NR_bpf not defined. libbpf does not support
your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fix this by including tools/scripts/Makefile.arch for the proper $ARCH
macro. While at it, remove redundant LP64 macro definition.
Also, since libbpf require $(srctree) now, detect the path of srctree
like perf.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-10-git-send-email-wangnan0@huawei.com
[Use tools/scripts/Makefile.arch]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After this patch other directories can use this architecture detector
without directly including it from perf's directory. Libbpf would
utilize it to get proper $(ARCH) so it can receive correct uapi include
directory.
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452520124-2073-8-git-send-email-wangnan0@huawei.com
[ Add missing srctree definition in tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Checks BPF syscall number, turn off libbpf building on platform doesn't
correctly support sys_bpf instead of blocking compiling.
Reported-and-Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
make_kernelsrc and make_kernelsrc_tools are skiped if a previous
build-test is done, because 'make build-test' creates two files with
same names. To avoid this, they should be included in .PHONY list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On some system the perf-config is broken, causes link failure like this:
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_forkpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3816: undefined reference to `forkpty'
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_openpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3756: undefined reference to `openpty'
collect2: error: ld returned 1 exit status
make[1]: *** [/home/wangnan/kernel-hydrogen/tools/perf/out/perf] Error 1
make: *** [all] Error 2
$ python-config --libs
-lpthread -ldl -lpthread -lutil -lm -lpython2.7
In this case a '-lutil' should be appended to -lpython2.7.
(I know we have --start-group and --end-group. I can see them in command
line of collect2 by strace. However it doesn't work. Seems I have a
broken environment?)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU updates from Ingo Molnar:
"The changes in this cycle were:
- Adding transitivity uniformly to rcu_node structure ->lock
acquisitions. (This is implemented by the first two commits on top
of v4.4-rc2 due to the pervasive nature of this change.)
- Documentation updates, including RCU requirements.
- Expedited grace-period changes.
- Miscellaneous fixes.
- Linked-list fixes, courtesy of KTSAN.
- Torture-test updates.
- Late-breaking fix to sysrq-generated crash.
One thing I should note is that these pieces of documentation are
fairly large files:
.../RCU/Design/Requirements/Requirements.html | 2897 ++++++++++++++++++++
.../RCU/Design/Requirements/Requirements.htmlx | 2741 ++++++++++++++++++
and are written in HTML, not the usual .txt style. I hope they are
fine"
Paul McKenney explains the html docs:
"For whatever it is worth, the reason for this unconventional choice
was that attempts to do the diagrams in ASCII art failed miserably.
And attempts to do ASCII art for the upcoming documentation of the
data structures failed even more miserably"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
sysrq: Fix warning in sysrq generated crash.
list: Add lockless list traversal primitives
rcu: Make rcu_gp_init() be bool rather than int
rcu: Move wakeup out from under rnp->lock
rcu: Fix comment for rcu_dereference_raw_notrace
rcu: Don't redundantly disable irqs in rcu_irq_{enter,exit}()
rcu: Make cpu_needs_another_gp() be bool
rcu: Eliminate unused rcu_init_one() argument
rcu: Remove TINY_RCU bloat from pointless boot parameters
torture: Place console.log files correctly from the get-go
torture: Abbreviate console error dump
rcutorture: Print symbolic name for ->gp_state
rcutorture: Print symbolic name for rcu_torture_writer_state
rcutorture: Remove CONFIG_RCU_USER_QS from rcutorture selftest doc
rcutorture: Default grace period to three minutes, allow override
rcutorture: Dump stack when GP kthread stalls
rcutorture: Flag nonexistent RCU GP kthread
rcutorture: Add batch number to script printout
Documentation/memory-barriers.txt: Fix ACCESS_ONCE thinko
documentation: Update RCU requirements based on expedited changes
...
Adding missing bitmap.[ch] sources to the MANIFEST file. Fixes building
'make perf-*-src-pkg' generated tarballs.
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 915b0882c3 ("tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/")
Link: http://lkml.kernel.org/r/1452509693-13452-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add *.cmd files to be removed within clean target.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509693-13452-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add *.cmd files to be removed within clean target.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509693-13452-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding missing clean targets for following tools directories:
lib/bpf
lib/subcmd
build
This are now cleaned via 'make -C tools clean' command.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509693-13452-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some architectures do not implement PTRACE_GETREGSET nor
PTRACE_SETREGSET (required by HAVE_ARCH_TRACEHOOK) but only implement
PTRACE_GETREGS and PTRACE_SETREGS (e.g. User-mode Linux).
This improve seccomp selftest portability for architectures without
HAVE_ARCH_TRACEHOOK support by defining a new trigger HAVE_GETREGS. For
now, this is only enabled for i386 and x86_64 architectures. This is
required to be able to run this tests on User-mode Linux.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: David Drysdale <drysdale@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Kees Cook <keescook@chromium.org>
In preparation for getting a poison list using ARS DSMs, enable DSMs for
all manufactured NFITs supplied by the test framework. Also, supply
valid response data for ars_status.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull perf fixes from Ingo Molnar:
"Two core subsystem fixes, plus a handful of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix race in swevent hash
perf: Fix race in perf_event_exec()
perf list: Robustify event printing routine
perf list: Add support for PERF_COUNT_SW_BPF_OUT
perf hists browser: Fix segfault if use symbol filter in cmdline
perf hists browser: Reset selection when refresh
perf hists browser: Add NULL pointer check to prevent crash
perf buildid-list: Fix return value of perf buildid-list -k
perf buildid-list: Show running kernel build id fix
Currently we don't synthesize data mmap by default. It depends on -d
option, that enables data address sampling.
But we've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Making data mmaps to be synthesized for dwarf unwind as well.
Reported-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160107133022.GA32115@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Reported-and-Tested-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've seen cases (softice) where DWARF unwinder went through non
executable mmaps, which we need to lookup in MAP__VARIABLE tree.
Reported-and-Tested-by: Noel Grandin <noelgrandin@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The find_map helper is already there, so let's use it.
Also we're going to introduce wider search in following patch, so it'll
be easier to make this change on single place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Noel Grandin <noelgrandin@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing them with perf_evsel__(enable|disable).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' uses perf_evsel__open() to open events and passes the
evsel->cpus and evsel->threads. Many tests and some tools instead use
perf_evlist__open() which passes instead evlist->cpus and
evlist->threads.
Make perf_evlist__open() follow the 'perf record' behaviour so that a
consistent approach is taken.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf report only shows a help message "For a higher level
overview, try: perf report --sort comm,dso" unconditionally (even if
the sort keys were used). Add more help tips and show randomly.
Load tips from ${prefix}/share/doc/perf-tip/tips.txt file.
$ perf report | tail
0.10% swapper [kernel.vmlinux] [k] irq_exit
0.09% swapper [kernel.vmlinux] [k] flush_smp_call_function_queue
0.08% swapper [kernel.vmlinux] [k] native_write_msr_safe
0.03% swapper [kernel.vmlinux] [k] group_sched_in
0.01% perf [kernel.vmlinux] [k] native_write_msr_safe
#
# (Tip: Search options using a keyword: perf report -h <keyword>)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452166913-27046-1-git-send-email-namhyung@kernel.org
[ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These are necessary for multi threaded sample processing:
- hists__get__get_rotate_entries_in()
- hists__collapse_insert_entry()
- __hists__init()
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using perf_hpp__register_sort_field interface instead of directly adding
the entry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently set 'overhead' and 'overhead_children' as default sort keys
within perf_hpp__init function by directly adding into the sort list.
This patch adds 'overhead' and 'overhead_children' in text form into
sort_keys and let them be added by standard sort dimension interface.
We need to eliminate dirrect sort_list additions to be able to add
support for hists specific sort keys.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Besides lockdep we use all the 'tools/lib' code in perf, so include it
completely in tags.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These lost headers are found in arm64 cross buildings, failing to build
perf using tarballs generated using:
$ make perf-targz-src-pkg
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452263041-225488-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The trace command still appears in help message when you run simple
'perf' command.
It's because the generate-cmdlist.sh does not care about the
HAVE_LIBAUDIT_SUPPORT dependency of trace command and puts it into
generated common_cmds array.
Wrapping trace command under HAVE_LIBAUDIT_SUPPORT dependency, which
will exclude it from common_cmds array if HAVE_LIBAUDIT_SUPPORT is not
set.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The event group view feature is to see related events together. To use
the group view, events should be recorded as a group with a dedicated
syntax of surrounding events by braces (-e '{ evt1, evt2, ... }').
Also 'perf report' also requires the --group option to enable it.
However it's almost always beneficial to use the group view to see the
group events as it's more expressive. And I think it's more natural to
see events together if they are recorded as a group.
Thus this patch changes the default value to enable it. If users don't
want to see like it and keep the original behavior, they can set the
report.group config variable to false and/or use --no-group option in
the 'perf report' command line.
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1448807057-3506-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It missed to decay periods in callchains when decaying hist entries.
This resulted in more than 100 percent overhead in callchains in the
fractal style output.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1451963160-17196-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need to move the bitmap.[ch] things from tools/perf/ to tools/lib, will
be done in the next patches.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: George Spelvin <linux@horizon.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lkml.kernel.org/n/tip-5fys65wkd7gu8j7a7xgukc5t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit that introduced it should've moved it to the same place, plus
the 'tools/' prefix, but instead moved it to a bogus tools/lib/util/
directory, being the only file there.
Move it to tools/lib/find_bit.c, picking the name for the file where
these routines live since:
8f6f19dd51 ("lib: move find_last_bit to lib/find_next_bit.c")
Next step is to make tools/lib/find_bit.c to differ from lib/find_bit.c
just in removing what is not used by tools/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: George Spelvin <linux@horizon.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lkml.kernel.org/n/tip-p391cex5mqvahp4pwrton87n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we've added a 'trigger_async_request' knob to test the
request_firmware_nowait() API, let's use it. Also add tests for the
empty ("") string, since there have been a couple errors in that
handling already.
Since we now have real ways that the sysfs write might fail, let's add
the appropriate check on the 'echo' lines too.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The casting was done incorrectly for 32-bit builds. Fixed to use uintptr_t.
Reported-by: Eric Adams <adamse@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Before:
$ perf test -v cqm
48: Test intel cqm nmi context read :
--- start ---
test child forked, pid 1681
parse_events failed
test child finished with -2
---- end ----
Test intel cqm nmi context read: Skip
$
After:
$ perf test -v cqm
48: Test intel cqm nmi context read :
--- start ---
test child forked, pid 1681
parse_events failed, is "intel_cqm/llc_occupancy/" available?
test child finished with -2
---- end ----
Test intel cqm nmi context read: Skip
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eidpiv5x4nkbsx37xwikbnir@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were asking for a 4kHz sample_freq, making the test fail needlessly
when the system reduced /proc/sys/kernel/perf_event_max_sample_rate
below that.
Before:
# perf test -vv dummy
23: Test using a dummy software event to keep tracking :
--- start ---
test child forked, pid 32421
------------------------------------------------------------
perf_event_attr:
type 1
size 112
config 0x9
{ sample_period, sample_freq } 4000
sample_type IP|TID|ID|PERIOD
<SNIP>
sys_perf_event_open failed, error -22
Unable to open dummy and cycles event
test child finished with -2
---- end ----
Test using a dummy software event to keep tracking: Skip
#
[root@zoo ~]# cat /proc/sys/kernel/perf_event_max_sample_rate
1000
After:
[root@zoo ~]# perf test dummy
23: Test using a dummy software event to keep tracking : Ok
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-487iquegrs2379e5n0pi0tcp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing this problem, introduced recently:
$ perf test python
16: Try 'import perf' in python, checking link problems : FAILED!
In verbose mode we find out what is missing:
$ perf test -v python
16: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 24894
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol: find_next_bit
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: f77b57ad4f ("perf cpu_map: Add cpu_map__new_event function")
Link: http://lkml.kernel.org/n/tip-rajx0zkz6czdrnvvwf0jp76p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're not looking at PERF_RECORD_SAMPLE entries and now by default we
use PERF_COUNT_SW_DUMMY, so just remove that setting.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-cly7cnotktv5rqao13pkorem@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we're test just the !PERF_RECORD_SAMPLE records.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qp8radcz3il4q9wbnseh337d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For case where all we need is an evlist with just an "dummy" evsel,
like in some 'perf test' entries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q52le0pblm2k3ncvyilelr9z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were asking for a 4kHz sample_freq, making the test fail needlessly
when the system reduced /proc/sys/kernel/perf_event_max_sample_rate
below that.
In this test we only look at the PERF_SAMPLE_TIME fields in PERF_RECORD_
meta events, no need to set sample_freq.
Thanks to Namhyung for suggesting that max_sample_rate could be the
reason for the test failure, seeing the 'perf test -vv' output I sent.
Before:
# echo 1000 > /proc/sys/kernel/perf_event_max_sample_rate
# perf test TSC
45: Test converting perf time to TSC : FAILED!
After:
# perf test TSC
45: Test converting perf time to TSC : Ok
# cat /proc/sys/kernel/perf_event_max_sample_rate
1000
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lcob05qhawkuvsyuu9g1fld5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a bug in __perf_pmu__new_alias() whereby the
alias->snapshot field was not initialized to false. This led to random
alias->snapshot value for an alias and was breaking some measurements
such as:
$ perf stat -a -e uncore_imc/data_reads/ -I 1000 sleep 100
Because the event ended up being treated as snapshot mode, when it is
not.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1452106201-13073-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding stat-cpi.py as an example of how to do stat scripting.
It computes the CPI metrics from cycles and instructions events.
The CPI is based performance metric showing the Cycles Per Instructions
ratio, which helps to identify cycles-hungry code.
Following stat record/report/script combinations could be used:
- get CPI for given workload
$ perf stat -e cycles,instructions record ls
SNIP
Performance counter stats for 'ls':
2,904,431 cycles
3,346,878 instructions # 1.15 insns per cycle
0.001782686 seconds time elapsed
$ perf script -s ./scripts/python/stat-cpi.py
0.001783: cpu -1, thread -1 -> cpi 0.867803 (2904431/3346878)
$ perf stat -e cycles,instructions record ls | perf script -s ./scripts/python/stat-cpi.py
SNIP
0.001730: cpu -1, thread -1 -> cpi 0.869026 (2928292/3369627)
- get CPI systemwide:
$ perf stat -e cycles,instructions -a -I 1000 record sleep 3
# time counts unit events
1.000158618 594,274,711 cycles (100.00%)
1.000158618 441,898,250 instructions
2.000350973 567,649,705 cycles (100.00%)
2.000350973 432,669,206 instructions
3.000559210 561,940,430 cycles (100.00%)
3.000559210 420,403,465 instructions
3.000670798 780,105 cycles (100.00%)
3.000670798 326,516 instructions
$ perf script -s ./scripts/python/stat-cpi.py
1.000159: cpu -1, thread -1 -> cpi 1.344823 (594274711/441898250)
2.000351: cpu -1, thread -1 -> cpi 1.311972 (567649705/432669206)
3.000559: cpu -1, thread -1 -> cpi 1.336669 (561940430/420403465)
3.000671: cpu -1, thread -1 -> cpi 2.389178 (780105/326516)
$ perf stat -e cycles,instructions -a -I 1000 record sleep 3 | perf script -s ./scripts/python/stat-cpi.py
1.000202: cpu -1, thread -1 -> cpi 1.035091 (940778881/908885530)
2.000392: cpu -1, thread -1 -> cpi 1.442600 (627493992/434974455)
3.000545: cpu -1, thread -1 -> cpi 1.353612 (741463930/547766890)
3.000622: cpu -1, thread -1 -> cpi 2.642110 (784083/296764)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't convert u16 cpu_map_entries::cpu[x] value directly to int,
because it could hold -1, which would be converted as 65535.
Adding special treatment for -1, which is not real cpu number, to be
converted to (int -1).
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to get stat events data in perf python scripts.
The python script shall implement the following new interface to process
stat data:
def stat__<event_name>_[<modifier>](cpu, thread, time, val, ena, run):
- is called for every stat event for given counter,
if user monitors 'cycles,instructions:u" following
callbacks should be defined:
def stat__cycles(cpu, thread, time, val, ena, run):
def stat__instructions_u(cpu, thread, time, val, ena, run):
def stat__interval(time):
- is called for every interval with its time,
in non interval mode it's called after last
stat event with total measured time in ns
The rest of the current interface stays untouched..
Please check example CPI metrics script in following patch
with command line examples in changelogs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-8-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement struct scripting_ops::(process_stat|process_stat_interval)
handlers - calling scripting handlers from stat events handlers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-6-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Python and perl scripting code will define those callbacks and get stat
data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-5-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of stat config event and initialize stat_config
object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of cpu/threads maps. Configuring session's evlist with
these maps.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For pipe sessions we need to keep sample_type zero, because script's
perf_evsel__check_attr is triggered by sample_type != 0, and the check
would fail on stat session.
I was tempted to keep it zero unconditionally, but the pipe session is
sufficient. In perf.data session we are guarded by HEADER_STAT feature.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1451991518-25673-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a perf.data file has multiple events, it's likely to be similar
(tracepoint) events. In that case, they might have same field name so
add all of them to sort keys instead of bailing out.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1451991518-25673-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using FEATURE-DUMP in bpf subproject for features detection in case bpf
is built via perf. Keeping the current features detection otherwise.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the contents of the FEATURE-DUMP file, so it looks like:
feature-backtrace=1
feature-dwarf=0
feature-fortify-source=1
feature-sync-compare-and-swap=0
This way it could get included in sub projects, so they won't be forced
to redo features detection.
Also now storing the complete set of features.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The feature_assign macro generates feature value
assignment for name, like:
$(call feature_assign,dwarf) == feature-dwarf=1
This will be used more in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-4-git-send-email-jolsa@kernel.org
[ Rename it to feature_assign, the original shorter name was misleading, to say the least ;-) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We decide what dwarf unwind to choose way after the Makefile.feature
makefile is included. The $(dwarf-post-unwind) is not even set at that
time. For the same reason it was never included in FEATURE-DUMP file.
Moving it into perf VF=1 verbose display.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
...
... LIBUNWIND_DIR:
... LIBDW_DIR:
... DWARF post unwind library: libunwind
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function is cursed.. ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an evlist contains tracepoint events only, use 'trace' sort key as
default. If --raw-trace option was given, use 'trace_fields' instead.
This will make users more convenient to see trace result.
Suggested-and-Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-14-git-send-email-namhyung@kernel.org
[ Check evlist in get_default_sort_order() fixing a segfault in 'perf test hists' reported by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dynamic sort key requires event name but specifying full event name
is rather inconvenient. This patch adds more ways to identify the event
in a more compact way.
1. If session has just one event, event name can be omitted.
2. Events can be accessed by index preceded by a percent sign.
3. A part of the name can be used, if it's not ambiguous. The partial
name should not contain ':' in it.
4. Full system + event name is still used, it should contain ':'.
So in the below example all does same thing:
$ perf record -e sched:sched_switch -a sleep 1
$ perf report -s next_pid,next_comm
$ perf report -s %1.next_pid,%1.next_comm
$ perf report -s switch.next_pid,switch.next_comm
$ perf report -s sched:sched_switch.next_pid,sched:sched_switch.next_comm
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'trace' sort key is to show tracepoint event output using either
print fmt or plugin. For example sched_switch event (using plugin) will
show output like below:
# perf record -e sched:sched_switch -a usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.197 MB perf.data (69 samples) ]
#
$ perf report -s trace --stdio
...
# Overhead Trace output
# ........ ...................................................
#
9.48% swapper/0:0 [120] R ==> transmission-gt:17773 [120]
9.48% transmission-gt:17773 [120] S ==> swapper/0:0 [120]
9.04% swapper/2:0 [120] R ==> transmission-gt:17773 [120]
8.92% transmission-gt:17773 [120] S ==> swapper/2:0 [120]
5.25% swapper/0:0 [120] R ==> kworker/0:1H:109 [100]
5.21% kworker/0:1H:109 [100] S ==> swapper/0:0 [120]
1.78% swapper/3:0 [120] R ==> transmission-gt:17773 [120]
1.78% transmission-gt:17773 [120] S ==> swapper/3:0 [120]
1.53% Xephyr:6524 [120] S ==> swapper/0:0 [120]
1.53% swapper/0:0 [120] R ==> Xephyr:6524 [120]
1.17% swapper/2:0 [120] R ==> irq/33-iwlwifi:233 [49]
1.13% irq/33-iwlwifi:233 [49] S ==> swapper/2:0 [120]
Note that the 'trace' sort key works only for tracepoint events. If
it's used to other type of events, just "N/A" will be printed.
Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Each tracepoint event has format string for print to improve
readability. Try to parse the output and match the field name. If it
finds one, use that for the result. If not, fallbacks to the original
output.
For example, sort on kmem:kmalloc.gfp_flags looks like below:
(Note: libtraceevent plugins are not installed on my system. They might
affect the output below)
Before:
# Overhead Command gfp_flags
# ........ ....... ..........
#
99.89% perf 32848
0.06% sleep 208
0.03% perf 32976
0.01% perf 208
After:
# Overhead Command gfp_flags
# ........ ....... ...................
#
99.89% perf GFP_NOFS|GFP_ZERO
0.06% sleep GFP_KERNEL
0.03% perf GFP_KERNEL|GFP_ZERO
0.01% perf GFP_KERNEL
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-7-git-send-email-namhyung@kernel.org
[ Fixed clash with earlier, updated patch in this patchkit ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support dynamic sort keys for tracepoint
events. Dynamic sort keys can be created for specific fields in trace
events so it needs the event information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-5-git-send-email-namhyung@kernel.org
[ Moving the evlist creation earlier in top was split to a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support dynamic sort keys for tracepoint
events. Dynamic sort keys can be created for specific fields in trace
events so it needs the event information, so we need to pass the evlist
to the sort routines, create it sooner so that the next patch can do
that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-5-git-send-email-namhyung@kernel.org
[ Split from the patch passing the evlist to the sort routines ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The print_event_field() and print_event_fields() functions print basic
information of a given field or event without the print format. They'll
be used by dynamic sort keys later.
Committer note:
Rename it to pevent_print_field[s]() to get proper namespacing, as
discussed with Steven Rostedt.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450876121-22494-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The raw_data and raw_size fields are to provide tracepoint specific
information. They will be used by dynamic sort keys later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450923377-18641-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to add more info into the hist_entry. Also it
already passes too many argument, so passing sample directly will reduce
the overhead of the function call.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU changes from Paul E. McKenney:
- Adding transitivity uniformly to rcu_node structure ->lock
acquisitions. (This is implemented by the first two commits
on top of v4.4-rc2 due to the pervasive nature of this change.)
- Documentation updates, including RCU requirements.
- Expedited grace-period changes.
- Miscellaneous fixes.
- Linked-list fixes, courtesy of KTSAN.
- Torture-test updates.
- Late-breaking fix to sysrq-generated crash.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This socket-lookup path did not pass along the skb in question
in my original BPF-based socket selection patch. The skb in the
udpN_lib_lookup2 path can be used for BPF-based socket selection just
like it is in the 'traditional' udpN_lib_lookup path.
udpN_lib_lookup2 kicks in when there are greater than 10 sockets in
the same hlist slot. Coincidentally, I chose 10 sockets per
reuseport group in my functional test, so the lookup2 path was not
excersised. This adds an additional set of tests with 20 sockets.
Fixes: 538950a1b7 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF")
Fixes: 3ca8e40299 ("soreuseport: BPF selection functional test")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This program will build classic and extended BPF programs and
validate the socket selection logic when used with
SO_ATTACH_REUSEPORT_CBPF and SO_ATTACH_REUSEPORT_EBPF.
It also validates the re-programing flow and several edge cases.
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ACPICA commit 0d784a90bc3aac75227c4459c3553de18b9ebe7a
Document one of the option string operators.
Link: https://github.com/acpica/acpica/commit/0d784a90
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit dfa394471f6c01b2ee9433dbc143ec70cb9bca72
Mostly indentation inconsistencies across the code. Split
some long lines, etc.
Link: https://github.com/acpica/acpica/commit/dfa39447
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Get the core time(keeping) updates from John Stultz
- NTP robustness tweaks
- Another signed overflow nailed down
- More y2038 changes
- Stop alarmtimer after resume
- MAINTAINERS update
- Selftest fixes
Allowing to override record aggr_mode. It's possible to use perf stat
like:
$ perf stat report -A
$ perf stat report --per-core
$ perf stat report --per-socket
To customize the recorded aggregate mode regardless what was used during
the stat record command.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-19-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of event update events, so perf stat report can store
additional info for events - unit,scale,name.
Committer note:
Before:
# perf stat record -e power/energy-cores/ -a
^C
Performance counter stats for 'system wide':
77.41 Joules power/energy-cores/
1.597176695 seconds time elapsed
# perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e power/energy-cores/ -a':
332,488,114,176 power/energy-cores/
1.597176695 seconds time elapsed
#
After, using the same perf.data file generated in the "Before" case
above:
# perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e power/energy-cores/ -a':
77.41 Joules power/energy-cores/
1.597176695 seconds time elapsed
#
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of stat and stat round events.
The stat data com in stat events, using generic function
process_stat_round_event to store data under perf_evsel object.
The stat-round events comes each interval or as last event in non
interval mode. The function process_stat_round_event process stored data
for each perf_evsel object and print it out.
Committer note:
After this patch:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.498381 task-clock (msec) # 0.571 CPUs utilized
2 context-switches # 0.004 M/sec
0 cpu-migrations # 0.000 K/sec
149 page-faults # 0.299 M/sec
1,271,635 cycles # 2.552 GHz
928,712 stalled-cycles-frontend # 73.03% frontend cycles idle
663,286 stalled-cycles-backend # 52.16% backend cycles idle
792,614 instructions # 0.62 insns per cycle
# 1.17 stalled cycles per insn
136,850 branches # 274.589 M/sec
<not counted> branch-misses (0.00%)
0.000873419 seconds time elapsed
$
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record usleep 1':
0.498381 task-clock (msec) # 0.571 CPUs utilized
2 context-switches # 0.004 M/sec
0 cpu-migrations # 0.000 K/sec
149 page-faults # 0.299 M/sec
1,271,635 cycles # 2.552 GHz
928,712 stalled-cycles-frontend # 73.03% frontend cycles idle
663,286 stalled-cycles-backend # 52.16% backend cycles idle
792,614 instructions # 0.62 insns per cycle
# 1.17 stalled cycles per insn
136,850 branches # 274.589 M/sec
<not counted> branch-misses (0.00%)
0.000873419 seconds time elapsed
$
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we have csv_sep properly initialized before report command leg.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-18-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using perf.data's perf_env data to initialize aggregate config.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-15-git-send-email-jolsa@kernel.org
[ s/stat/st/g, s/socket/socket_id/g to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of stat config event and initialize stat_config
object.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-14-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding processing of cpu/threads maps. Configuring session's evlist with
these maps.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-13-git-send-email-jolsa@kernel.org
[ s/stat/st/g, s/time/tm/g parameters to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'perf stat report' command support. ATM it only processes attr
events and display nothing.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize other events stuff not carried within attr event - unit,
scale, name.
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently don't support storing multiple session in perf.data,
so we can't allow -r option in stat record.
$ perf stat -e cycles -r 2 record ls
Cannot use -r option with perf stat record.
Committer note:
Before this patch we would a perf.data file such as:
$ perf stat -e cycles -r 2 record ls
<SNIP>
Performance counter stats for 'ls' (2 runs):
3,935,236 cycles
0.002353261 seconds time elapsed ( +- 4.76% )
$ perf report -D | grep PERF_RECORD | grep ROUND
0xf0 [0]: failed to process type: 16
Error:
failed to process sample
$
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Writing stat round events on 'perf stat record' for each interval round.
In non interval mode we store round event after the last stat event.
Committer note:
After the patch:
$ perf report -D | grep PERF_RECORD | grep ROUND
0x852 [0x18]: PERF_RECORD_STAT_ROUND
$
Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing storing stat record data into pipe, so report tools
(report/script) could read data directly from record.
Committer note:
Before this patch:
$ perf stat record -o - usleep 1 | perf report -i -
incompatible file format (rerun with -v to learn more)
$ perf stat record -o - usleep 1 | perf script -i -
incompatible file format (rerun with -v to learn more)
$ ls -la perf.data
ls: cannot access perf.data: No such file or directory
$
After:
$ perf stat record -o - usleep 1 | perf report -i -
# To display the perf.data header info, please use
# --header/--header-only options.
#
Error:
The - file has no samples!
$ perf stat record -o - usleep 1 | perf script -i -
Display of symbols requested but neither sample IP nor sample address
is selected. Hence, no addresses to convert to symbols.
0 [0x80]: failed to process type: 64
$ ls -la perf.data
ls: cannot access perf.data: No such file or directory
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Store event IDs in evlist object so it get stored into perf.data file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to storing the event IDs in evlist object so it get stored
into perf.data file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-6-git-send-email-jolsa@kernel.org
[ Split from the patch storing the ids in the perf.data file ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesizing needed stat record data for report/script:
- cpu/thread maps
- stat config
Committer note:
New records generated on a perf.data file with this patch:
$ perf report -D | grep PERF_RECORD_
0x568 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 29097
0x590 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x5a2 [0x40]: PERF_RECORD_STAT_CONFIG
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-5-git-send-email-jolsa@kernel.org
[ Adjusted wrt kernel PERF_RECORD_MMAP added when introducing 'perf stat record' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disabling all non stat related features.
Also as we now enable STAT feature in the data file, adding code to
instruct session open to skip sample type checking for stat data files.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'perf stat record' command support. It creates simple (header only)
perf.data file ATM.
The record command could be specified anywhere among stat options. All
stat command options are valid for stat record command with '-o' option
exception. If specified for record command it denotes the perf data file
name.
Committer note:
Set sample_type to PERF_SAMPLE_IDENTIFIER, which should be harmless
while avoiding that older tools show confusing messages, for instance,
with sample_type = 0, we get:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.630237 task-clock (msec) # 0.528 CPUs utilized
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
52 page-faults # 0.083 M/sec
978,312 cycles # 1.552 GHz
671,931 stalled-cycles-frontend # 68.68% frontend cycles idle
<not supported> stalled-cycles-backend
646,379 instructions # 0.66 insns per cycle
# 1.04 stalled cycles per insn
131,046 branches # 207.931 M/sec
7,073 branch-misses # 5.40% of all branches
0.001193240 seconds time elapsed
$ oldperf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
non matching sample_type
$
While with sample_type set to PERF_SAMPLE_IDENTIFIER, after we re-run 'perf
stat record usleep' we get:
$ oldperf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
task-clock
context-switches
cpu-migrations
page-faults
cycles
stalled-cycles-frontend
stalled-cycles-backend
instructions
branches
branch-misses
$
Which at least shows the names of the events in the perf.data file.
Additionally, such files, when passed to 'perf report' will produce:
$ oldperf report --stdio
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
Warning:
Kernel address maps (/proc/{kallsyms,modules}) were restricted.
Check /proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples
can't be resolved.
Samples in kernel modules can't be resolved as well.
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Which is confusing and can be solved by just adding the kernel mmap record,
which will also remove that warning about the data size field being equal to
zero, after generating the mmap record:
$ perf stat record usleep 1
Performance counter stats for 'usleep 1':
0.600796 task-clock (msec) # 0.478 CPUs utilized
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
54 page-faults # 0.090 M/sec
886,844 cycles # 1.476 GHz
582,169 stalled-cycles-frontend # 65.65% frontend cycles idle
<not supported> stalled-cycles-backend
638,344 instructions # 0.72 insns per cycle
# 0.91 stalled cycles per insn
130,204 branches # 216.719 M/sec
7,500 branch-misses # 5.76% of all branches
0.001255897 seconds time elapsed
$ oldperf evlist
task-clock
context-switches
cpu-migrations
page-faults
cycles
stalled-cycles-frontend
stalled-cycles-backend
instructions
branches
branch-misses
$ oldperf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
[acme@zoo linux]$
No warnings, sensible output about what are the events in the perf.data file and also
a "file has no samples" message, which indeed it doesn't.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: htp://lkml.kernel.org/r/1446734469-11352-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing the 'stat' feature to mark a perf.data as created by the
'perf stat record' command. It contains no data.
It's needed so that the report tools (report/script) can differentiate
sampling data from counting data, because they need to be treated in a
different way.
In the future it might be used to store the version of the stat storage
system used.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-28-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf report -D' command will now display detailed output for these
newly added events:
event_update
thread_map
cpu_map
stat
stat_config
stat_round
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-27-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To display a 'event update' event for raw dump.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-26-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the cpumask 'event update' event, that stores/transfer the
cpumask for a event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-25-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding name type 'event update' event, that stores/transfer events name.
Event's name is stored within perf.data's EVENT_DESC feature, but we
don't have it if we get the report data from pipe.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-24-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A__allocdding scale type 'event update' event, that stores/transfer
events scale value. The PMU events can define the scale
value which is used to multiply events data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding unit type 'event update' event, that stores/transfer events unit
name. The unit name is part of the perf stat output data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-22-git-send-email-jolsa@kernel.org
[ Rename __alloc() to __new() for consistency ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll serve as a base event for additional event attributes details,
that are not part of the attr event.
At the moment this event is just a dummy one without any specific
functionality. The type value will distinguish the update event details.
It'll come in the following patches.
The idea for this event is to be extensible for any update that the
event might need in the future.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-21-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing the following functions to display the stat events for raw
dump.
perf_event__fprintf_stat
perf_event__fprintf_stat_round
perf_event__fprintf_stat_config
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-20-git-send-email-jolsa@kernel.org
[ s/stat/st/g and s/round/rd/g parameters to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce the perf_event__synthesize_stat_round function to
synthesize a 'struct stat_round_event'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-19-git-send-email-jolsa@kernel.org
[ Renamed 'time' parameter to 'evtime' to fix build on older systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the stat round event to be stored after each stat interval round,
so that report tools (report/script) gets notified and process interval
data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-18-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing the perf_event__process_stat_event function to process a
'struct perf_stat' data from a stat event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-17-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce the perf_event__synthesize_stat function to synthesize a
'struct stat_event'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-16-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding a stat event to store a 'struct perf_counter_values' for a given
event/cpu/thread.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-15-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing the perf_event__read_stat_config function to read a struct
perf_stat_config object data from a stat config event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce the perf_event__synthesize_stat_config to synthesize a 'struct
perf_stat_config'.
Storing the stat config in the form of tag-value pairs will, I believe,
sort out future version extensibility issues.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the stat config event to pass/store stat config data, so report
tools (report/script) know how to interpret stat data.
The config data is stored in a 'tag|value' way to allow for easy
extension and backwards compatibility.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-12-git-send-email-jolsa@kernel.org
[ stat_config_term_event -> stat_config_event_entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To display a cpu_map event for raw dump.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing the cpu_map__new_event function to create a struct cpu_map
object from a cpu_map event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce the perf_event__synthesize_cpu_map function to synthesize a
struct cpu_map.
Added generic interface:
cpu_map_data__alloc
cpu_map_data__synthesize
to make the cpu_map synthesizing usable for other events.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the cpu_map event to pass/store cpu maps as data in
a pipe/perf.data.
We store maps in 2 formats:
- list of cpus
- mask of cpus
The format that takes less space is selected transparently in the
following patch.
The interface is made generic, so we could add the cpumap event data
into another event in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-8-git-send-email-jolsa@kernel.org
[ cpu_map_data_cpus -> cpu_map_entries, cpu_map_data_mask -> cpu_map_mask ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To display a thread_map event for a raw dump.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing the thread_map__new_event function to create a struct
thread_map object from a thread_map event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce the perf_event__synthesize_thread_map2 function to synthesize
struct thread_map.
The perf_event__synthesize_thread_map name is already taken for
synthesizing the complete threads data (comm/mmap/fork).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-5-git-send-email-jolsa@kernel.org
[ Rename thread_map_data_event to thread_map_event_entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the thread_map event to pass/store thread maps as data in
the pipe/perf.data.
Storing the thread ID along with the standard comm[16] thread name string.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-4-git-send-email-jolsa@kernel.org
[ Renamed thread_map_data_event to thread_map_event_entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the files that will be moved to the subcmd library, remove all their
perf-specific includes and duplicate any needed functionality.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/6e12946f0f26ce4d543d34db68d9dae3c8551cb9.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for moving exec_cmd.c and run-command.c out of perf and
into a library, remove 'perf' from all the symbol names.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/bc3ee82b40b8f396b644fa49e0f7260ce442635b.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce and use new astrcat() and astrcatf() functions which replace
the strbuf functionality for subcmd.
For now they duplicate strbuf's die-on-allocation-error policy.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/957d207e1254406fa11fc2e405e75a7e405aad8f.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
HMIs (Hypervisor Management|Maintenance Interrupts) are a class of interrupt
on POWER systems.
HMI support has traditionally been exceptionally difficult to test, however
Skiboot ships a tool that, with the correct magic numbers, will inject them.
This, therefore, is a first pass at a script to inject HMIs and monitor
Linux's response. It injects an HMI on each core on every chip in turn
It then watches dmesg to see if it's acknowledged by Linux.
On a Tuletta, I observed that we see 8 (or sometimes 9 or more) events per
injection, regardless of SMT setting, so we wait for 8 before progressing.
It sits in a new scripts/ directory in selftests/powerpc, because it's not
designed to be run as part of the regular make selftests process. In
particular, it is quite possibly going to end up garding lots of your CPUs,
so it should only be run if you know how to undo that.
CC: Mahesh J Salgaonkar <mahesh.salgaonkar@in.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Simply because it touches more code paths that way, and therefore tests
more things.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Anton Blanchard <anton@samba.org>
For ease of use make the context_switch test do something useful when
called with no arguments.
Default to a 30 second run, using threads, doing yield, and use any
online cpu. Make it print out what it's doing to avoid confusion.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Anton Blanchard <anton@samba.org>
This gets referred to a lot in commit messages, so let's pull it into
the selftests.
Almost vanilla from: http://ozlabs.org/~anton/junkcode/context_switch2.c
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Anton Blanchard <anton@samba.org>
We want to use this in another test, so make it available at the top of
the powerpc selftests tree.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a43eec3042 ("bpf: introduce bpf_perf_event_output() helper") added
PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw
array that wasn't initialized, thus set to NULL, fix print_symbol_events()
to check for that case so that we don't crash if this happens again.
(gdb) bt
#0 __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198
#1 strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252
#2 0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall")
at util/parse-events.c:1615
#3 print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675
#4 0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68
#5 0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370
#6 0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429
#7 run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473
#8 main (argc=2, argv=0x7fffffffe390) at perf.c:588
(gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT]
$4 = {symbol = 0x0, alias = 0x0}
(gdb)
A patch to robustify perf to not segfault when the next counter gets added in
the kernel will follow this one.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-57wysblcjfrseb0zg5u7ek10@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've
added it to tools/perf, where it is used just to list events.
This ended up causing a segfault in commands like "perf list stall".
Fix it by adding that new software counter.
A patch to robustify perf to not segfault when the next counter gets
added in the kernel will follow this one.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uya354upi3eprsey6mi5962d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create init functions for exec_cmd.c and pager.c. This allows their
configuration to be specified at runtime so they can be split out into a
separate library which can be used by other programs. Their
configuration is stored in a shared subcmd_config struct.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/21f5f6b38da72c985a8dcfa185700d03e7eecd1d.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Generally, calling exit() from a library is bad practice. Eventually
these functions might be redesigned so that they don't exit. For now,
just document the fact that they do.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/97b1af06cc3b18dd0f49e655d6d659eaa64ecde5.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
strlcpy() will be needed by the subcmd library. Move it to the shared
tools/lib/string.c file which can be used by other tools.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/71e2804b973bf39ad3d3b9be10f99f2ea630be46.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building perf binaries outside the source tree with 'make O=<dir>',
the auto-detected features get re-tested for every build, which is
unnecessary and inconsistent with the behavior seen when building
directly in the source tree.
Another issue is that 'make O=<dir> clean' doesn't remove the feature
files from the object tree.
Fix these problems by looking for the binaries in the $(OUTPUT)
directory.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/113bd01530e9761778c60a75a96c65fc59860f68.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Post processing at 'perf record' takes a long time on big machines.
What it does is to find the build-id of binaries found in the event
stream, so that it can make sure, at 'report' time, that the symtabs (be
it ELF, kallsyms, etc) being used to resolve symbols are the ones
matching the binaries found at 'record' time.
Sometimes we just want to skip this processing of events at the end of
the session to get quicker results, making sure the binaries haven't
changed from 'record' to 'report' time.
Add a new config option to control this behavior.
The record.build-id config variable can have one of the following
values:
- cache: post-process data and save/update the binaries into the
build-id cache (in ~/.debug). This is the default.
- no-cache: post-process the data but not update the build-id cache.
Same effect as using the -N option.
- skip: skip post-processing and do not update the cache.
Same effect as using the -B option.
Reported-and-Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1450144196-22957-1-git-send-email-namhyung@kernel.org
[ Added some more text to the documentation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The unit test infrastructure uses CMA and real memory to emulate nvdimm
resources. The call to devm_memremap_pages() can simply be mocked in
the same manner as memremap and we mock phys_to_pfn_t() to clear PFN_MAP
since these resources are not registered with in the pgmap_radix.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fix the write()'s argument in the daemon code.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HV_FCOPY is already used as identifier in syslog.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently some "Unspecified error 0x80004005" is reported on the Windows
side if something fails. Handle the ENOSPC case and return
ERROR_DISK_FULL, which allows at least Copy-VMFile to report a meaning
full error.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a userspace tool to access Linux kernel AML debugger
interface.
Tow modes are supported by this tool:
1. Interactive: Users are able to launch a debugging shell to talk with
in-kernel AML debugger.
Note that it's user duty to ensure kernel runtime integrity by using
this debugging tool:
A. Some control methods evaluated by the users may result in kernel
panics if those control methods shouldn't be evaluated by the OSPMs
according to the current BIOS/OS configurations.
B. Currently if a single stepping evaluation couldn't run to an end,
then the synchronization primitives acquired by the evaluation may
block normal OSPM control method evaluations.
2. Batch: Users are able to execute debugger commands in a script.
Note that in addition to the above duties, it's user duty to ensure
script runtime integrity by using this debugging tool in this mode:
C. Currently only those commands that are not used for single stepping
are suitable to be used in this mode.
D. If the execution of the command may cause a failure that could result
in an endless kernel execution, the execution of the script may also
get blocked.
To exit the utility, currently "exit/quit" commands are recommended, but
ctrl-C" can also be used.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make perf-record command support --vmlinux option if BPF_PROLOGUE is on.
'perf record' needs vmlinux as the source of DWARF info to generate
prologue for BPF programs, so path of vmlinux should be specified.
Short name 'k' has been taken by 'clockid'. This patch skips the short
option name and uses '--vmlinux' for vmlinux path.
Documentation is also updated.
Test result:
In a production (or broken) environment:
(by:
# rm -rf ~/.debug/
# mv /lib/modules/`uname -r`/build/vmlinux /tmp/
)
# ./perf record -e ./test_bpf_base.c ls
Failed to find the path for kernel: No such file or directory
event syntax error: './test_bpf_base.c'
\___ You need to check probing points in BPF file
...
# ./perf record --vmlinux /tmp/vmlinux -e ./test_bpf_base.c ls
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data ]
Help messages when build with NO_LIBBPF:
# ./perf record -h
--transaction sample transaction flags (special events only)
--vmlinux <file> vmlinux pathname
(not built-in because NO_LIBBPF=1)
# ./perf record --vmlinux /tmp/vmlinux ls /
Warning: option `vmlinux' is being ignored because NO_LIBBPF=1
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (11 samples) ]
Help messages when build with NO_DWARF:
# ./perf record -h
--transaction sample transaction flags (special events only)
--vmlinux <file> vmlinux pathname
(not built-in because NO_DWARF=1)
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1450089563-122430-15-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch keeps options of perf builtins same in all conditions. If
one option is disabled because of compiling options, users should be
notified.
Masami suggested another implementation in [1] that, by adding a
OPTION_NEXT_DEPENDS option before those options in the 'struct option'
array, options parser knows an option is disabled. However, in some
cases this array is reordered (options__order()). In addition, in
parse-option.c that array is const, so we can't simply merge
information in decorator option into the affacted option.
This patch chooses a simpler implementation that, introducing a
set_option_nobuild() function and two option parsing flags. Builtins
with such options should call set_option_nobuild() before option
parsing. The complexity of this patch is because we want some of options
can be skipped safely. In this case their arguments should also be
consumed.
Options in 'perf record' and 'perf probe' are fixed in this patch.
[1] http://lkml.kernel.org/g/50399556C9727B4D88A595C8584AAB3752627CD4@GSjpTKYDCembx32.service.hitachi.net
Test result:
Normal case:
# ./perf probe --vmlinux /tmp/vmlinux sys_write
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
Build with NO_DWARF=1:
# ./perf probe -L sys_write
Error: switch `L' is not available because NO_DWARF=1
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
or: perf probe [<options>] --del '[GROUP:]EVENT' ...
or: perf probe --list [GROUP:]EVENT ...
or: perf probe [<options>] --funcs
-L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]>
Show source code lines.
(not built-in because NO_DWARF=1)
# ./perf probe -k /tmp/vmlinux sys_write
Warning: switch `k' is being ignored because NO_DWARF=1
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
# ./perf probe --vmlinux /tmp/vmlinux sys_write
Warning: option `vmlinux' is being ignored because NO_DWARF=1
Added new event:
[SNIP]
# ./perf probe -l
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
...
-k, --vmlinux <file> vmlinux pathname
(not built-in because NO_DWARF=1)
-L, --line <FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]>
Show source code lines.
(not built-in because NO_DWARF=1)
...
-V, --vars <FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT>
Show accessible variables on PROBEDEF
(not built-in because NO_DWARF=1)
--externs Show external variables too (with --vars only)
(not built-in because NO_DWARF=1)
--no-inlines Don't search inlined functions
(not built-in because NO_DWARF=1)
--range Show variables location range in scope (with --vars only)
(not built-in because NO_DWARF=1)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1450089563-122430-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
help_unknown_cmd() is quite perf-specific because it relies on some
perf_config*() functions. Move it and its supporting functions out into
a separate file so that help.c can be moved to a library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/562d918bcaaf340c1ae3e47586b3f0ae33b9918b.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_PAGER_IN_USE doesn't seem to be used anywhere, so let's remove it.
This will also make it easier to move pager.c into a separate library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ed9e8370db9811746dc590544cf48c36dcfb1731.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the 'pager' function prototypes into a new pager.h so that the
pager code can be moved out to a library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ba7c316474dd6bfc047e5c6dc4dcab39a982caf5.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'LIB_PATH' is a misnomer because there are multiple library paths.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c10df0b749a27f05cc531fe06b8dd71a329341fa.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some missing files to the 'make clean' target.
Reported-and-Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8b1f5a5bd66a652be071d423e64aaa994254be31.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because the Build file writes source code to the generated llvm-src-*.c
files, it should be listed as one of the dependencies, so that any
future changes to the code being echoed won't require a 'make clean'.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/9b9886c295750dc83cbbb29a665d280f9c5e8b3e.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This line always silently fails because it doesn't add the 'test-'
prefix to the .bin file.
And it seems to be unnecessary anyway: the line immediately after it
does all the individual feature checks.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/554a05c18af564ba015c9e68f25730126e0f4acb.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently if kptr_restrict is enabled, all hist tests failed with
segfaults. This is because machine__create_kernel_maps() in
setup_fake_machine() failed in that situation, and it called
machine__delete() on the error path. But outer callers again called
machines__exit() causing double free for the host machine.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1450062673-22312-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[The kernel patch needed for this is in tip now (b16a5b52eb perf/x86:
Add option to disable ...) So this user tools patch to make use of it
should be merged now]
Automatically disable collecting branch flags and cycles with
--call-graph lbr. This allows avoiding a bunch of extra MSR
reads in the PMI on Skylake.
When the kernel doesn't support the new flags they are automatically
cleared in the fallback code.
v2: Switch to use branch_sample_type instead of sample_type.
Adjust description.
Fix the fallback logic.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1449879144-29074-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should always return from thread__new(), the constructor, with the
object with a reference count of one, so that:
struct thread *thread = thread__new();
thread__put(thread);
Will call thread__delete().
If any reference is made to that 'thread' variable, it better use
thread__get(thread) to hold a reference.
We were returning with thread->refcnt set to zero, fix it and some cases
where thread__delete() was being called, which were not a problem
because just one reference was being used, now that we set it to 1, use
thread__put() instead.
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4b9mkuk66to4ecckpmpvqx6s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. don't exit with the signal number, instead set the signal handler
to the default one and then raise it again.
Noticed while trying to dump the stack at segfaults in the 'perf test'
forked process used to run each test, that inspects signal info at
each test.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5x5r176wnoqxi5p6id05wv9w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a transaction is aborted, VSR values should rollback to the
checkpointed values before the transaction began. VSRs used elsewhere in
the kernel during a transaction, or while the transaction is suspended
should not affect the checkpointed values.
Prior to the bug fix in commit d31626f70b ("powerpc: Don't corrupt
transactional state when using FP/VMX in kernel") when VMX was requested
by the kernel the .vr_state (which held the checkpointed state of VSRs
before the transaction) was overwritten with the current state from
outside the transation. Thus if the transaction did not complete, the
VSR values would be "rolled back" to potentially incorrect values.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test the kernels signal generation code to ensure it can handle an
invalid stack pointer when transactional.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Skip if we don't have TM]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test the kernel's signal return code to ensure that it doesn't crash
when both the transactional and suspend MSR bits are set in the signal
context.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Skip if we don't have TM]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move have_htm_nosc() into a new tm.h, and add a new helper, have_htm()
which we'll use in the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
User visible:
- Fix 'perf top' annotation in --stdio (Namhyung Kim)
- Support hw breakpoint events (mem:0xAddress) in the default output mode in
'perf script' (Wang Nan)
Infrastructure:
- Do not hold the hists lock while emitting one specific warning (Namhyung Kim)
- Fetch map names from correct strtab, worked so far because llvm/clang
uses just one string table (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MkFX
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Fix 'perf top' annotation in --stdio (Namhyung Kim)
- Support hw breakpoint events (mem:0xAddress) in the default output mode in
'perf script' (Wang Nan)
Infrastructure changes:
- Do not hold the hists lock while emitting one specific warning (Namhyung Kim)
- Fetch map names from correct strtab, worked so far because llvm/clang
uses just one string table (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new name is irq_poll as iopoll is already taken. Better suggestions
welcome.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
There are so many test cases use stack allocated 'struct machine'.
Including:
test__hists_link
test__hists_filter
test__mmap_thread_lookup
test__thread_mg_share
test__hists_output
test__hists_cumulate
Also, in non-test code (for example, machine__new_host()) there are
code use 'malloc()' to alloc struct machine.
These are dangerous operations, cause some tests fail or hung in
machines__exit(). For example, in
machines__exit ->
machine__destroy_kernel_maps ->
map_groups__remove ->
maps__remove ->
pthread_rwlock_wrlock
a incorrectly initialized lock causes unintended behavior.
This patch memset(0) that structure in machine__init() to ensure all
fields in 'struct machine' are initialized to zero.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449541544-67621-17-git-send-email-wangnan0@huawei.com
[ Use memset, see 'man bzero' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add hexadecimal u32 to base data type, which is useful for raw output
because raw data is u32 aligned.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449541544-67621-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim pointed out a potential problem in original code that it
fetches names of maps from section header string table, which is used
to store section names.
Original code doesn't cause error because of a LLVM behavior that, it
combines shstrtab into strtab. For example:
$ echo 'int func() {return 0;}' | x86_64-oe-linux-clang -x c -o temp.o -c -
$ readelf -h ./temp.o
ELF Header:
Magic: 7f 45 4c 46 02 01 01 03 00 00 00 00 00 00 00 00
...
Section header string table index: 1
$ readelf -S ./temp.o
There are 10 section headers, starting at offset 0x288:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .strtab STRTAB 0000000000000000 00000230
0000000000000051 0000000000000000 0 0 1
...
$ readelf -p .strtab ./temp.o
String dump of section '.strtab':
[ 1] .text
[ 7] .comment
[ 10] .bss
[ 15] .note.GNU-stack
[ 25] .rela.eh_frame
[ 34] func
[ 39] .strtab
[ 41] .symtab
[ 49] .data
[ 4f] -
$ readelf -p .shstrtab ./temp.o
readelf: Warning: Section '.shstrtab' was not dumped because it does not exist!
Where, 'section header string table index' points to '.strtab', and
symbol names are also stored there.
However, in case of gcc:
$ echo 'int func() {return 0;}' | gcc -x c -o temp.o -c -
$ readelf -p .shstrtab ./temp.o
String dump of section '.shstrtab':
[ 1] .symtab
[ 9] .strtab
[ 11] .shstrtab
[ 1b] .text
[ 21] .data
[ 27] .bss
[ 2c] .comment
[ 35] .note.GNU-stack
[ 45] .rela.eh_frame
$ readelf -p .strtab ./temp.o
String dump of section '.strtab':
[ 1] func
They are separated sections.
Although original code doesn't cause error, we'd better use canonical
method for fetching symbol names to avoid potential behavior changing.
This patch learns from readelf's code, fetches string from sh_link
of .symbol section.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reported-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449541544-67621-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 561bbccac7 ("tools lib bpf:
Extract and collect map names from BPF object file") forgets checking
return value of strdup(). This patch fixes it. It also checks names
pointer before strcmp() for safety.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 561bbccac7 ("tools lib bpf: Extract and collect map names from BPF object file")
Link: http://lkml.kernel.org/r/1449541544-67621-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'he' cannot be NULL since it's caller hist_iter__top_callback() is
called only if iter->he is not NULL (see hist_entry_iter__add). So
setting 'sym' before the condition to simplify the code.
Also make it clearer that the top->symbol_filter_entry check is only
meaningful on stdio mode (i.e. when use_browser is 0).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449802616-16170-4-git-send-email-namhyung@kernel.org
[ Complete the simplification replacing one more he->ms.sym with sym ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui__has_annotation() inside perf_top__record_precise_ip() should be
removed since it returns true only for TUI (and when sort key has
symbol). However the 'perf top --stdio' also supports annotation for a
symbol which was specified by 's' key action.
Actually it already does the necessary checks before calling the
function. So it's ok to get rid of the check here.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449802616-16170-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_top__record_precise_ip() releases and regrabs the
he->hists->lock because it can sleep if there's an error. But it should
be done conditionally as it slows down the fast path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449802616-16170-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We call map->unmap_ip() before the function and call map->map_ip()
inside the function. This is meaningless and look strange since only
one of the two checks 'map'. Let's use al->addr directly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449802616-16170-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function can return negative value.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Fix dso__load_sym to put dso because dsos__add already got it.
Refcnt debugger explain the problem:
----
==== [0] ====
Unreclaimed dso: 0x19dd200
Refcount +1 => 1 at
./perf(dso__new+0x1ff) [0x4a62df]
./perf(dso__load_sym+0xe89) [0x503509]
./perf(dso__load_vmlinux+0xbf) [0x4aa77f]
./perf(dso__load_vmlinux_path+0x8c) [0x4aa8dc]
./perf() [0x50539a]
./perf(convert_perf_probe_events+0xd79) [0x50ad39]
./perf() [0x45600f]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f74dd0efaf5]
./perf() [0x4220a9]
Refcount +1 => 2 at
./perf(dso__get+0x34) [0x4a65f4]
./perf(map__new2+0x76) [0x4be216]
./perf(dso__load_sym+0xee1) [0x503561]
./perf(dso__load_vmlinux+0xbf) [0x4aa77f]
./perf(dso__load_vmlinux_path+0x8c) [0x4aa8dc]
./perf() [0x50539a]
./perf(convert_perf_probe_events+0xd79) [0x50ad39]
./perf() [0x45600f]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f74dd0efaf5]
./perf() [0x4220a9]
Refcount +1 => 3 at
./perf(dsos__add+0xf3) [0x4a6bc3]
./perf(dso__load_sym+0xfc1) [0x503641]
./perf(dso__load_vmlinux+0xbf) [0x4aa77f]
./perf(dso__load_vmlinux_path+0x8c) [0x4aa8dc]
./perf() [0x50539a]
./perf(convert_perf_probe_events+0xd79) [0x50ad39]
./perf() [0x45600f]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f74dd0efaf5]
./perf() [0x4220a9]
Refcount -1 => 2 at
./perf(dso__put+0x2f) [0x4a664f]
./perf(map_groups__exit+0xb9) [0x4bee29]
./perf(machine__delete+0xb0) [0x4b93d0]
./perf(exit_probe_symbol_maps+0x28) [0x506718]
./perf() [0x45628a]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f74dd0efaf5]
./perf() [0x4220a9]
Refcount -1 => 1 at
./perf(dso__put+0x2f) [0x4a664f]
./perf(machine__delete+0xfe) [0x4b941e]
./perf(exit_probe_symbol_maps+0x28) [0x506718]
./perf() [0x45628a]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f74dd0efaf5]
./perf() [0x4220a9]
----
So, in the dso__load_sym, dso is gotten 3 times, by dso__new,
map__new2, and dsos__add. The last 2 is actually released by
map_groups and machine__delete correspondingly. However, the
first reference by dso__new, is never released.
Committer note:
Changed the place where the reference count is dropped to:
Fix it by dropping it right after creating curr_map, since we know that
either that operation failed and we need to drop the dso refcount or
that it succeed and we have it referenced via curr_map->dso.
Then only drop the curr_map refcount after we call dsos__add() to make
sure we hold a reference to it via curr_map->dso.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151209021118.10245.49869.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Note that since the thread was already inserted to the session
list, it will be released when the session is released.
Also, in perf_session__register_idle_thread() failure path,
the thread should be put before returning.
Refcnt debugger shows that the perf_session__register_idle_thread
gets the returned thread, but the caller (__cmd_top) does not
put the returned idle thread.
----
==== [0] ====
Unreclaimed thread@0x24e6240
Refcount +1 => 0 at
./perf(thread__new+0xe5) [0x4c8a75]
./perf(machine__findnew_thread+0x9a) [0x4bbdba]
./perf(perf_session__register_idle_thread+0x28) [0x4c63c8]
./perf(cmd_top+0xd7d) [0x43cf6d]
./perf() [0x47ba35]
./perf(main+0x617) [0x4225b7]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5]
./perf() [0x42272d]
Refcount +1 => 1 at
./perf(thread__get+0x2c) [0x4c8bcc]
./perf(machine__findnew_thread+0xee) [0x4bbe0e]
./perf(perf_session__register_idle_thread+0x28) [0x4c63c8]
./perf(cmd_top+0xd7d) [0x43cf6d]
./perf() [0x47ba35]
./perf(main+0x617) [0x4225b7]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5]
./perf() [0x42272d]
Refcount +1 => 2 at
./perf(thread__get+0x2c) [0x4c8bcc]
./perf(machine__findnew_thread+0x112) [0x4bbe32]
./perf(perf_session__register_idle_thread+0x28) [0x4c63c8]
./perf(cmd_top+0xd7d) [0x43cf6d]
./perf() [0x47ba35]
./perf(main+0x617) [0x4225b7]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5]
./perf() [0x42272d]
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151209021122.10245.69707.stgit@localhost.localdomain
[ Drop the refcount in perf_session__register_idle_thread() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After sample processing is done, hist entries are in both of
hists->entries and hists->entries_in (or hists->entries_collapsed). So
I guess perf report does not have leaks on hists.
But for perf top, it's possible to have half-processed entries which are
only in hists->entries_in. Eventually they will go to the
hists->entries and get freed but they cannot be deleted by current
hists__delete_entries(). This patch adds hists__delete_all_entries
function to delete those entries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-and-Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1449734015-9148-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since all of its users call before setup_browser(), there's no need to
call exit_browser() inside of the function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449716459-23004-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is necessary to get rid of the browser dependency from
usage_with_options() and its friends. Because we validate the targets
which are used to create the cpu/thread maps and inform the user about
any override performed via the chosen UI, we don't need to call the
usage routine for that.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-slu7lj7buzpwgop1vo9la8ma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is necessary to get rid of the browser dependency from
usage_with_options() and its friends. Because there's no code
changing the argc and argv, it'd be ok to check it early.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449716459-23004-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling setup_browser(false) with use_browser = 0 is meaningless.
Just get rid of it. This is necessary to remove the browser
dependency from usage_with_options() and friends.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449716459-23004-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move setup_browser after all necessary initialization is done. This is
to remove the browser dependency from usage_with_options and friends.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449716459-23004-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is necessary to get rid of the browser dependency from
usage_with_options() and its friends. Because there's no code changing
the argc and argv, it'd be ok to check it early.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449716459-23004-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two DSCR tests have a hack in them:
/*
* XXX: Force a context switch out so that DSCR
* current value is copied into the thread struct
* which is required for the child to inherit the
* changed value.
*/
sleep(1);
We should not be working around this in the testcase, it is a kernel bug.
Fix it by copying the current DSCR to the child, instead of what we
had in the thread struct at last context switch.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move cmd_version() to its own file so that help.c can be moved to a
library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e908b1b68f20ab6d8d33941d5571c23110622e60.1449548395.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_env__set_cmdline() only saves the arguments the first time it's
called. It doesn't need to be called every time the options and
suboptions are parsed. Instead it can just be called once.
This also has the advantage of making the option parsing code less
perf-specific so it can be moved out to a library.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/19b76a5aa1b688bd635bd65d80bbc103a978d75e.1449548395.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The term functions are needed by help.c which is going to be moved into
a separate library. Move them out of util.c and into their own file.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/9a39c854dd156b55ebda57e427594c9a59dcb40f.1449548395.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix write_numa_topology to put cpu_map instead of free because cpu_map
is managed based on refcnt.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151209021135.10245.79046.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix machine.vmlinux_maps to make sure to clear the old one if it is
renewal. This can leak the previous maps on the vmlinux_maps because
those are just overwritten.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151209021133.10245.93730.stgit@localhost.localdomain
[ Simplified the memset, same end result ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since hists__init doesn't set the destructor of hists_evsel (which is an
extended evsel structure), when hists_evsel is released, the extended
part of the hists_evsel is not deleted (note that the hists_evsel object
itself is freed).
This fixes it to add a destructor for hists__evsel and to set it up.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151209021129.10245.28710.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix cmd_stat() to release cpu_map objects (aggr_map and
cpus_aggr_map) afterwards.
refcnt debugger shows that the cmd_stat initializes cpu_map
but not puts it.
----
# ./perf stat -v ls
....
REFCNT: BUG: Unreclaimed objects found.
==== [0] ====
Unreclaimed cpu_map@0x29339c0
Refcount +1 => 1 at
./perf(cpu_map__empty_new+0x6d) [0x4e64bd]
./perf(cmd_stat+0x5fe) [0x43594e]
./perf() [0x47b785]
./perf(main+0x617) [0x422587]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f2dff420af5]
./perf() [0x4226fd]
REFCNT: Total 1 objects are not reclaimed.
"cpu_map" leaks 1 objects
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151209021127.10245.93697.stgit@localhost.localdomain
[ Remove NULL checks before calling the put operation, it checks it already ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Boris reported that 'perf top' is unusable on his default 'black on
white' terminal, which uses (eye friendly) light-grey as a background
color.
The reason is that the TUI cursor for the current selection line uses
HE_COLORSET_SELECTED, and that has a default background color of
'lightgrey' - which is a common terminal background choice and thus
the colors conflict.
Use yellow as the background color instead: that should be an uncommon
terminal background, yet it's still ergonomic on both black and
white/grey terminals.
[ It would be a better solution to straight out detect color
collisions and resolve them reasonably by converting them to RGB and
calculating color space distances, but I was unable to find
proper documentation for SLtt_get_color_object() to recover the
current color scheme so I gave up ... Yellow works well enough. ]
Reported-and-Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150305103213.GA23046@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the spelling of 'output' in the error message.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add basic support to parse ARM assembly.
This:
* enables perf to correctly show the disassembly, rather than chopping
some constants off at the '#' (which is not a comment character on
ARM).
* allows perf to identify ARM instructions that branch to other parts
within the same function, thereby properly annotating them.
* allows perf to identify function calls, allowing called functions to
be followed in the annotated view.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/n/tip-owp1uj0nmcgfrlppfyeetuyf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's more readable this way and we can save one
perf_evsel__is_group_leader condition in current code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449133606-14429-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we have 2 kinds of stat counters based on when the event is
enabled:
1) tracee command events, which are enable once the
tracee executes exec syscall (enable_on_exec bit)
2) all other events which get alive within the
perf_event_open syscall
And 2) case could raise a problem in case we want additional filter to
be attached for event. In this case we want the event to be enabled
after it's configured with filter.
Changing the behaviour of 2) events, so they all are created as disabled
(disabled bit). Adding extra enable call to make them alive once they
finish setup.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449133606-14429-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to mimic the behaviour of perf_evlist__enable, we can use it
directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449133606-14429-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use perf_evsel__(enable|disable) functions in perf_evlist__(enable|disable)
functions in order to centralize ioctl enable/disable calls. This way we
eliminate 2 places calling directly ioctl.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449133606-14429-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_evsel__disable function to have complement for
perf_evsel__enable function. Both will be used in following patch to
factor perf_evlist__(enable|disable).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449133606-14429-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All events now share proper cpu and thread maps. There's no need to pass
those maps from evlist, it's safe to use evsel maps for enabling event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1449133606-14429-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It fixes segfault within machine__exit, that's caused
but not creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/tip-k4snzv5t4dvdckggzwdzyljo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bpf-output is added under software events, but is not parse-able
within parse_events, which is what round trip test is expecting.
Checking software events only until dummy event.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1449131658-1841-6-git-send-email-jolsa@kernel.org
[ Make it a one liner by keeping __perf_evsel__name_array_test() around ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In error path to try user space event, both cpus and threads map now
owned by evlist and freed by perf_evlist__set_maps call. Getting
reference to keep them alive.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1449131658-1841-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is more straightforward than what we have now.
It also fixes a segfault within machine__exit, that's caused
by not creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1449131658-1841-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is more straightforward than what we have now.
It also fixes a segfault within machine__exit, that's caused by not
creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1449131658-1841-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is more straightforward than what we have now.
It also fixes a segfault within machine__exit, that's caused by not
creating kernel maps for machine.. We're calling
machine__destroy_kernel_maps in machine__exit since commit:
ebe9729c8c perf machine: Fix to destroy kernel maps when machine exits
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1449131658-1841-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's a mistake in dso__adjust_kmod_long_name() that it use strdup()
to dup the new long_name of a dso, but passes the original string to
dso__set_long_name(). Which causes random crash during cleanup.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: c03d5184f0 ("perf machine: Adjust dso->long_name for offline module")
Link: http://lkml.kernel.org/r/1449455785-42020-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit cf561f0d2e ("virtio: introduce
virtio_is_little_endian() helper") changed byteswap logic to
skip feature bit checks for LE platforms, but didn't
update tools/virtio, so vring_bench started failing.
Update the copy under tools/virtio/ (TODO: find a way to avoid this code
duplication).
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If feed perf a symbol filter in cmdline and the result is empty,
pressing 'Enter' in the hist browser causes crash:
# ./perf report perf.data <-- Common mistake for beginners
Then press 'Enter':
perf: Segmentation fault
-------- backtrace --------
/home/wangnan/perf[0x53e578]
/lib64/libc.so.6(+0x3545f)[0x7f76bafe045f]
/home/wangnan/perf[0x539dd4]
/home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d216]
/home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
/home/wangnan/perf[0x47efa2]
/home/wangnan/perf(main+0x5f5)[0x432fa5]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7f76bafccbd4]
/home/wangnan/perf[0x4330d4]
This is because 'perf.data' is interpreted as a symbol filter, and the
result is empty, so selection is empty. However,
hist_browser__toggle_fold() forgets to check it.
This patch simply return false when selection is NULL.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the following steps:
Step 1: perf report
Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'
Step 3: Use '/' to filter symbols, use a filter which returns
empty result
Step 4: Press 'ENTER'
We see that, even if we have filtered all the symbols (and the main
interface is empty), pressing 'ENTER' still selects one symbol. This
behavior surprises the user.
This patch resets browser->{he_,}selection in hist_browser__refresh()
and lets it choose default selection. In this case
browser->{he_,}selection keeps NULL so user won't see annotation item in
menu.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch we can trigger a segfault by following steps:
Step 0: Use 'perf record' to generate a perf.data without callchain
Step 1: perf report
Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'
Step 3: Use '/' to filter symbols, use a filter which returns
empty result
Step 4: Press 'ENTER' (notice here that the old selection is still
there. This is another problem)
Step 5: Press 'ENTER' to annotate that symbol
Step 6: Press 'LEFT' to go out.
Result: segfault:
perf: Segmentation fault
-------- backtrace --------
/home/wangnan/perf[0x53e568]
/lib64/libc.so.6(+0x3545f)[0x7fba75d3245f]
/home/wangnan/perf[0x537516]
/home/wangnan/perf[0x533fef]
/home/wangnan/perf[0x53b347]
/home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d206]
/home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
/home/wangnan/perf[0x47efa2]
/home/wangnan/perf(main+0x5f5)[0x432fa5]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7fba75d1ebd4]
/home/wangnan/perf[0x4330d4]
This is because in this case 'nd' could be NULL in
ui_browser__hists_seek(), but that function never checks it.
This patch adds checker for potential NULL pointer in that function.
After this patch the above steps won't segfault.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --kernel option of perf buildid-list tool should show the running
kernel buildid. The functionality has been lost during other changes of
the related code.
The build_id__sprintf() function should return length of the build-id
string, but it was the length of the build-id raw data instead. Due to
that, some return value checking caused that the final string was not
printed out.
With this patch the build_id__sprintf() returns the correct value, so
the --kernel option works again.
Before:
# perf buildid-list --kernel
#
After:
# perf buildid-list --kernel
972c1edab5bdc06cc224af45d510af662a3c6972
#
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LPU-Reference: 1448632089.24573.114.camel@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, the console output files ("console.log") are placed in the
build directory initially, then copied to the results directory.
One problem with this is if a qemu refuses to die in a timely fashion
after a kernel hang, it will continue to write after the next qemu
starts up, resulting in confusing output from the old instance of
qemu. This commit prevents such confusion by placing the console.log
files into the results directory to begin with, so that a given instance
of qemu is always writing only to its own console.log file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, the scripts print a list of warning/bug indicators from the
console.log file. This works well if there are only a few warnings or
bugs, but can be quite annoying if there is a large number. This commit
therefore prints a summary listing the number of each type of warning/bug
indicator, but only if there is at least one such indicator. The full
list is stored in the results directory at console.log.diags, which
makes it easier to find the warning/bugs in the full console.log.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Commit d1ec4c34c7 ("rcu: Drop RCU_USER_QS in favor of NO_HZ_FULL") has
removed RCU_USER_QS from Kconfig file, so remove it from some documents
to avoid any confusion.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The default test grace period of two minutes is insufficient in some
cases and excessive in others. This commit therefore increases the
default to three minutes, but also adds a --shutdown-grace parameter
to allow the default to be overridden.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, the scripts print "----Start batch" at the beginning of each
batch, which does serve as a good visual delimiter between batches.
Unfortunately, if there are a lot of batches, it is hard to quickly
estimate test runtime from the output of "--dryrun sched". This commit
therefore adds a batch number, so that the beginning-of-batch output
looks like this "----Start batch 10" for the tenth batch.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
the intel-pstate driver does not support the ondemand governor and does not
have a valid value in
/sys/devices/system/cpu/cpu[x]/cpufreq/cpuinfo_transition_latency. The
intel-pstate driver sets cpuinfo_transition_latency to CPUFREQ_ETERNAL (-1),
the value written into cpuinfo_transition_latency is defind as an unsigned
int so checking the read value against max unsigned int will determine if the
value is valid.
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
this patch makes two changes to the way that "cpupower
frequancy-info" operates
1. make it so that querying individual values always returns a
message to the user
currently cpupower frequency info doesn't return anything to the user when
querying an individual value cannot be returned
[root@amd-dinar-09 cpupower]# cpupower -c 4 frequency-info -d
analyzing CPU 4:
[root@amd-dinar-09 cpupower]#
I added messages so that each query prints a message to the terminal
[root@amd-dinar-09 cpupower]# ./cpupower -c 4 frequency-info -d
analyzing CPU 4:
no or unknown cpufreq driver is active on this CPU
[root@amd-dinar-09 cpupower]#
(this is just one example)
2. change debug_output_one() to use the functions already provided
by cpufreq-info.c to query individual values of interest.
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use sysfs_is_cpu_online(cpu) instead of cpufreq_cpu_exists(cpu) to detect offlined cpus.
Re-arrange printfs slightly to have a consistent output even if you have multiple CPUs
as output and even if offlined cores are in between.
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When working on cpupower code, you often want to compile library code into the
binary.
This allows to execute modified cpupower code, even with library changes
without doing "make install"
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When support for _FIT was added, the code presumed that the data
returned by the _FIT method is identical to the NFIT table, which
starts with an acpi_table_header. However, the _FIT is defined
to return a data in the format of a series of NFIT type structure
entries and as a method, has an acpi_object header rather tahn
an acpi_table_header.
To address the differences, explicitly save the acpi_table_header
from the NFIT, since it is accessible through /sys, and change
the nfit pointer in the acpi_desc structure to point to the
table entries rather than the headers.
Reported-by: Jeff Moyer (jmoyer@redhat.com>
Signed-off-by: Linda Knippers <linda.knippers@hpe.com>
Acked-by: Vishal Verma <vishal.l.verma@intel.com>
[vishal: fix up unit test for new header assumptions]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that spidev_test and spidev_fdx have been moved, remove them
from the Documentation index and move their .gitignore file.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Following patches are going to introduce BPF object level configuration
to enable setting values into BPF maps. To avoid confusion, this patch
renames existing 'config' in bpf-loader.c to 'program config'. Following
patches would introduce 'object config'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448614067-197576-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects name of maps in BPF object files and saves them into
'maps' field in 'struct bpf_object'. 'bpf_object__get_map_by_name' is
introduced to retrive fd and definitions of a map through its name.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448614067-197576-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects more information from maps sections in BPF object
files into 'struct bpf_object', enables later patches access those
information (such as the type and size of the map).
In this patch, a new handler 'struct bpf_map' is extracted in parallel
with bpf_object and bpf_program. Its iterator and accessor is also
created.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448614067-197576-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf report on TUI was called with -S symbol filter, it should
update nr entries even if min_pcnt is 0. IIRC the reason was to update
nr entries after applying minimum percent threshold. But if symbol
filter was given on command line (with -S option), it should use
hists->nr_non_filtered_entries instead of hists->nr_entries.
So this patch fixes a bug of navigating hists browser that the cursor
goes beyond the number of entries when -S (or similar) option is used.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448645559-31167-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If user gives a filter, perf marks the corresponding column elided and
omits the output. But it should process and aggregates samples using
the field, otherwise samples will be aggregated as if the column was not
there resulted in incorrect output.
For example, I'd like to set a filter on native_write_msr_safe. The
original overhead of the function is negligible.
$ perf report | grep native_write_msr_safe
0.00% swapper [kernel.vmlinux] native_write_msr_safe
0.00% perf [kernel.vmlinux] native_write_msr_safe
However adding -S option gives different output.
$ perf report -S native_write_msr_safe --percentage absolute | \
> grep -e swapper -e perf
51.47% swapper [kernel.vmlinux]
4.14% perf [kernel.vmlinux]
Since it aggregated samples using comm and dso only. In fact, the above
values are same when it sorts with -s comm,dso.
$ perf report -s comm,dso | grep -e swapper -e perf
51.47% swapper [kernel.vmlinux]
4.14% perf [kernel.vmlinux]
This resulted in TUI failure with -ERANGE since it tries to increase
sample hit count for annotation with wrong symbols due to incorrect
aggregation.
This patch fixes it not to skip elided fields when comparing samples in
order to insert them to the hists.
Commiter note:
After the patch, with a different workloads:
# perf report --show-total-period -S native_write_msr_safe --stdio
#
# symbol: native_write_msr_safe
#
# Samples: 455 of event 'cycles:pp'
# Event count (approx.): 134787489
#
# Overhead Period Command Shared Object
# ........ ...... ............... ................
#
0.22% 293081 qemu-system-x86 [vmlinux]
0.19% 255914 swapper [vmlinux]
0.00% 2054 Timer [vmlinux]
0.00% 1021 firefox [vmlinux]
0.00% 2 perf [vmlinux]
# perf report --show-total-period | grep native_write_msr_safe
Failed to open /tmp/perf-14838.map, continuing without symbols
0.22% 293081 qemu-system-x86 [vmlinux] [k] native_write_msr_safe
0.19% 255914 swapper [vmlinux] [k] native_write_msr_safe
0.00% 2054 Timer [vmlinux] [k] native_write_msr_safe
0.00% 1021 firefox [vmlinux] [k] native_write_msr_safe
0.00% 2 perf [vmlinux] [k] native_write_msr_safe
#
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448645559-31167-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently when perf fails to process samples for some reason, it doesn't
show any message about the failure. This is very inconvenient for users
especially on TUI as screen is reset after the failure.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448645559-31167-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a43eec3042 ("bpf: introduce bpf_perf_event_output() helper") added
PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw
array that wasn't initialized, thus set to NULL, fix print_symbol_events()
to check for that case so that we don't crash if this happens again.
(gdb) bt
#0 __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198
#1 strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252
#2 0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall")
at util/parse-events.c:1615
#3 print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675
#4 0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68
#5 0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370
#6 0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429
#7 run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473
#8 main (argc=2, argv=0x7fffffffe390) at perf.c:588
(gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT]
$4 = {symbol = 0x0, alias = 0x0}
(gdb)
A patch to robustify perf to not segfault when the next counter gets added in
the kernel will follow this one.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-57wysblcjfrseb0zg5u7ek10@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've
added it to tools/perf, where it is used just to list events.
This ended up causing a segfault in commands like "perf list stall".
Fix it by adding that new software counter.
A patch to robustify perf to not segfault when the next counter gets
added in the kernel will follow this one.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uya354upi3eprsey6mi5962d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf test unwind' is failing because it forgot to create the kernel
maps, fix it.
After the patch:
# perf test unwind
40: Test dwarf unwind : Ok
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20151127082121.GA24503@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --kernel option of perf buildid-list tool should show the running
kernel buildid. The functionality has been lost during other changes of
the related code.
The build_id__sprintf() function should return length of the build-id
string, but it was the length of the build-id raw data instead. Due to
that, some return value checking caused that the final string was not
printed out.
With this patch the build_id__sprintf() returns the correct value, so
the --kernel option works again.
Before:
# perf buildid-list --kernel
#
After:
# perf buildid-list --kernel
972c1edab5bdc06cc224af45d510af662a3c6972
#
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LPU-Reference: 1448632089.24573.114.camel@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add bpf_map_update_elem() helper function which calls the sys_bpf
syscall to update elements in bpf maps. Upcoming patches will use it to
adjust data in map through the perf command line.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448372181-151723-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently when debuginfo is separated to vmlinux.debug, it's contents
get ignored. Let's change that and add it to the vmlinux_path list.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1448469166-61363-3-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor vmlinux_path__init() to ease subsequent additions of new
vmlinux locations.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1448469166-61363-2-git-send-email-tumanova@linux.vnet.ibm.com
[ Rename vmlinux_path__update() to vmlinux_path__add() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding OUTPUT path prefix for fixdep target so we use it properly in out
of tree builds.
If the fixdep already existed in the tree, the out of tree build would
see it already exist and did not build the out of tree version, as
reported by Arnaldo:
[acme@zoo linux]$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
make[2]: Nothing to be done for 'fixdep'.
make: Leaving directory '/home/git/linux/tools/perf'
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151126185055.GC19410@krava.brq.redhat.com
[ Fixed conflict with 5725dd8fa8 ("tools build: Clean CFLAGS and LDFLAGS for fixdep") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing perf_script struct into process_event function, so we could
process configuration data for event printing.
It will be used in following patch to get event name string width.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151126175521.GA18979@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When parsing /proc/xxx/maps, the sscanf in perf_event__synthesize_mmap_events
truncate the map name at the space in "/anon_hugepage (deleted)".
is_anon_memory() then only receives the string "/anon_hugepage" and does
not detect it. We change is_anon_memory() to only compare the first
part of the string, effectively ignoring if " (deleted)" is there.
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Joshua Zhu <zhu.wen-jie@hp.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1448538152-2898-1-git-send-email-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Something unexpected may happen if copy statically linked perf to a
production environment:
# ./perf probe -m ./mymodule.ko my_func
[mymodule] with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko
Error: Failed to add events.
# ./perf buildid-cache -a ./mymodule.ko
# ./perf probe -m ./mymodule.ko my_func
Added new event:
probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko)
You can now use it in all perf tools, such as:
perf record -e probe:my_func -aR sleep 1
Where:
# ldd ./perf
not a dynamic executable
# strace -e open ./perf probe -m ./mymodule.ko my_func
...
open("/home/wangnan/kmodule/mymodule.ko", O_RDONLY) = 3
open("/home/wangnan/kmodule/../lib64/elfutils/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
...
open("/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/wangnan/.debug/.build-id/32/6ab42550ef3d24944f53c817533728367effeb", O_RDONLY) = -1 ENOENT (No such file or directory)
open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory)
In the above example, probe fails before we put the module into
buildid-cache. However, user would expect it success in both case
because perf is able to find probe points actually.
The reason is because perf won't utilize module's full path if it failed
to open debuginfo. In:
convert_to_probe_trace_events ->
find_probe_trace_events_from_map ->
get_target_map ->
kernel_get_module_map ->
machine__findnew_module_map ->
map_groups__find_by_name
map_groups__find_by_name() is able to find the map of that module, but
this information is found from /proc/module before it knows the real
path of the offline module. Therefore, the map->dso->long_name is set to
something like '[mymodule]', which prevent dso__load() find the real
path of the module file.
In another aspect, if dso__load() can get the offline module through
buildid cache, it can read symble table from that ko. Even if debuginfo
is not available, 'perf probe' can success if the '.symtab' can be
found.
This patch improves machine__findnew_module_map(): when dso->long_name
is leading with '[' (doesn't find path of module when parsing
/proc/modules), fixes it by dso__set_long_name(), so following
dso__load() is possible to find the symbol table.
This patch won't interfere with buildid matching. Here is the test
result:
# ./perf probe -m ./mymodule.ko my_func
Added new event:
probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko)
You can now use it in all perf tools, such as:
perf record -e probe:my_func -aR sleep 1
# ./perf probe -d '*'
Removed event: probe:my_func
# mv ./mymodule.{ko,.bak}
# mv ./moduleb.ko mymodule.ko
# ./perf probe -m ./mymodule.ko my_func
/home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko
Error: Failed to add events.
# ./perf probe -v -m ./mymodule.ko my_func
probe-definition(0): my_func
symbol:my_func file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Could not open debuginfo. Try to use symbols.
symsrc__init: build id mismatch for /home/wangnan/kmodule/mymodule.ko.
/home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols
Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko
Error: Failed to add events. Reason: No such file or directory (Code: -2)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448510397-187965-1-git-send-email-wangnan0@huawei.com
[ Renamed adjust_dso_long_name() do dso__adjust_kmod_long_name() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo reported following build failure:
$ make clean install
...
CC plugin_kmem.o
fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory
/home/mingo/tip/tools/build/Makefile.build:77: recipe for target
'plugin_hrtimer.o' failed
make[3]: *** [plugin_hrtimer.o] Error 2
Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed
make[2]: *** [plugin_hrtimer-in.o] Error 2
Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed
make[1]: *** [libtraceevent_plugins] Error 2
make[1]: *** Waiting for unfinished jobs....
Currently we have the install-traceevent-plugins target being dependent
on $(LIBTRACEEVENT), which will actualy not build any plugin. So the
install-traceevent-plugins target itself will try to build plugins,
but..
Plugins built is also triggered by perf build itself via
libtraceevent_plugins target.
This might cause a race having one make thread removing temp files from
another and result in above error. Fixing this by having proper plugins
build dependency before installing plugins.
Reported-and-Tested-by:: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448546044-28973-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default script handler (the one that displays samples on screen) is
implemented scripting_ops instance with process_event callback.
This way we can't pass any script config into display function, because
we don't want perl or python handlers to be depended on perf script
internals.
Removing the default_scripting_ops and calling process event function
directly. This way it's possible to pass perf_script struct and process
configuration data in following commit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448546125-29245-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchain rbtree is rebuilt periodically, so it needs to
reinitialize the root everytime. Otherwise it can be stuck in the
rbtree insertion with stale pointers.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1448521700-32062-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If user requested to hide unresolved entries, skip unresolved callchains
as well as hist entries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1448521700-32062-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch libbpf always do feature check even when cleaning.
For example:
$ cd kernel/tools/lib/bpf
$ make
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC libbpf.o
CC bpf.o
LD libbpf-in.o
LINK libbpf.a
LINK libbpf.so
$ make clean
CLEAN libbpf
CLEAN core-gen
$ make clean
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CLEAN libbpf
CLEAN core-gen
$
Although the first 'make clean' doesn't show feature check result, it
still does the check. No output because check result is similar to
FEATURE-DUMP.libbpf.
This patch uses same method as perf to turn off feature checking when
'make clean'.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448372181-151723-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes passing variables to tools/build is dangerous. For example, on
my platform there is a gcc problem (gcc 4.8.1):
It passes the stackprotector-all feature check:
$ gcc -fstack-protector-all -c ./test.c
$ echo $?
0
But requires LDFLAGS support if separate compiling and linking:
$ gcc -fstack-protector-all -c ./test.c
$ gcc ./test.o
./test.o: In function `main':
test.c:(.text+0xb): undefined reference to `__stack_chk_guard'
test.c:(.text+0x21): undefined reference to `__stack_chk_guard'
collect2: error: ld returned 1 exit status
$ gcc -fstack-protector-all ./test.o
$ echo $?
0
$ gcc ./test.o -lssp
$ echo $?
0
$
In this environment building perf throws an error:
$ make
BUILD: Doing 'make -j24' parallel build
config/Makefile:344: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
config/Makefile:403: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
config/Makefile:418: slang not found, disables TUI support. Please install slang-devel or libslang-dev
config/Makefile:432: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
config/Makefile:564: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling
config/Makefile:606: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev
CC fixdep.o
LD fixdep-in.o
LINK fixdep
fixdep-in.o: In function `parse_dep_file':
/kernel/tools/build/fixdep.c:47: undefined reference to `__stack_chk_guard'
/kernel/tools/build/fixdep.c:117: undefined reference to `__stack_chk_guard'
fixdep-in.o: In function `main':
/kernel-hydrogen/tools/build/fixdep.c:156: undefined reference to `__stack_chk_guard'
/kernel/tools/build/fixdep.c:168: undefined reference to `__stack_chk_guard'
collect2: error: ld returned 1 exit status
make[2]: *** [fixdep] Error 1
make[1]: *** [fixdep] Error 2
make: *** [all] Error 2
This is because the CFLAGS used in building perf pollutes the CFLAGS
used for fixdep, passing -fstack-protector-all to buiold fixdep which is
obviously not required. Since fixdep is a small host side tool, we
should keep its CFLAGS/LDFLAGS simple and clean.
This patch clears the CFLAGS and LDFLAGS passed when building fixdep, so
such gcc problem won't block the perf build process.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448372181-151723-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 05c8d802fa ("perf probe: Fix to free temporal Dwarf_Frame")
tried to fix the memory leak of Dwarf_Frame, but it released the frame
at wrong point. Since the dwarf_frame_cfa(frame, &pf->fb_ops, &nops) can
return an address inside the frame data structure to pf->fb_ops, we can
not release the frame before using pf->fb_ops.
This reverts the commit and releases the frame afterwards (right before
returning from call_probe_finder) correctly.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 05c8d802fa ("perf probe: Fix to free temporal Dwarf_Frame")
LPU-Reference: 20151125103432.1473.31009.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create a test to test instance creation and deletion. Several tasks are
created that create 3 directories and delete them. The tasks all create the
same directories. This places a stress on the code that creates and deletes
instances.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a long value is read on 32 bit machines for 64 bit output, the
parsing needs to change "%lu" into "%llu", as the value is read
natively.
Unfortunately, if "%llu" is already there, the code will add another "l"
to it and fail to parse it properly.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20151116172516.4b79b109@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf-config document to describe the perf configuration and a
'list’ subcommand.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/63AD9B57-7B8C-46F8-8F18-0FFEB9A6A1BC@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf configuration file contains many variables to change various
aspects of each of its tools, including output, disk usage, etc.
But looking at the state of configuration is difficult and there's no
documentation about config variables except for the variables in
perfconfig.example exist.
So this patch adds a 'perf-config' command with a '--list' option.
perf config [options]
display current perf config variables.
# perf config -l | --list
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1447768424-17327-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As reported by Milian, currently for DWARF unwind (both libdw and
libunwind) we display callchain in callee order only.
Adding the support to follow callchain order setup to libdw DWARF
unwinder, so we could get following output for report:
$ perf record --call-graph dwarf ls
...
$ perf report --no-children --stdio
21.12% ls libc-2.21.so [.] __strcoll_l
|
---__strcoll_l
mpsort_with_tmp
mpsort_with_tmp
mpsort_with_tmp
sort_files
main
__libc_start_main
_start
$ perf report --stdio --no-children -g caller
21.12% ls libc-2.21.so [.] __strcoll_l
|
---_start
__libc_start_main
main
sort_files
mpsort_with_tmp
mpsort_with_tmp
mpsort_with_tmp
__strcoll_l
Reported-and-Tested-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jan Kratochvil <jkratoch@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20151119130119.GA26617@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding callchain order setup for DWARF unwinder test. The test now runs
unwinder for both callee and caller orders.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1447772739-18471-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As reported by Milian, currently for DWARF unwind (both libdw and
libunwind) we display callchain in callee order only.
Adding the support to follow callchain order setup to libunwind DWARF
unwinder, so we could get following output for report:
$ perf record --call-graph dwarf ls
...
$ perf report --no-children --stdio
39.26% ls libc-2.21.so [.] __strcoll_l
|
---__strcoll_l
mpsort_with_tmp
mpsort_with_tmp
sort_files
main
__libc_start_main
_start
0
$ perf report -g caller --no-children --stdio
...
39.26% ls libc-2.21.so [.] __strcoll_l
|
---0
_start
__libc_start_main
main
sort_files
mpsort_with_tmp
mpsort_with_tmp
__strcoll_l
Based-on-patch-by: Milian Wolff <milian.wolff@kdab.com>
Reported-and-Tested-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151118075247.GA5416@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving initial entry call into get_entries function so all entries
processing is on one place. It will be useful for next change that adds
ordering logic.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1447772739-18471-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This update consists of one minor documentation fix and a fix
to an existing test.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8sYr
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of one minor documentation fix and a fix to an
existing test"
* tag 'linux-kselftest-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/seccomp: Get page size from sysconf
tools:testing/selftests: fix typo in futex/README
This test used the cpupower utility to set the cpu frequency from the
maximum turbo value to the minimum supported value in steps of 100 MHz.
The results are displayed in a table which indicate the "Target" state,
or the requested frequency in MHz, the Actual frequency, as read from
/proc/cpuinfo, the difference between the Target and Actual frequencies,
and the value of MSR 0x199 (MSR_IA32_PERF_CTL) which indicates what
pstate the cpu is in, and the value of
/sys/devices/system/cpu/intel_pstate/max_perf_pct X maximum turbo state
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The ipc testcase exist in selftest but no in the TARGETS list.
Add it to the TARGETS.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The capatabilities exist in selftest but no in the TARGETS list.
Add it to the TARGETS.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Clean up the following things:
1. Avoid the broken when use TARGETS in the command line, eg:
$ make -C tools/testing/selftests TARGETS=capabilities
make[1]: *** No rule to make target 'capabilities', needed by 'all'. Stop.
Replace TARGETS with BINARIES.
2. User need to provide cap-ng.h and libcap-ng.so for cross compiling.
Replace ':=' with '+=' for CFLAGS and introduce LDLIBS to archieve
it. Delete useless EXTRA_CLAGS at the same time.
3. Delete the duplicated definition which is already defined by
lib.mk.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Check the result of sscanf to verify a result was found.
report and error and abort if pattern was not found.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For testing of larger data transfers, output unmodified data
directly to a file.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add input file support to facilitate testing larger data.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the input_tx code into its own small function.
This cleans up some variables from main() that are used only here.
While we are at it, check malloc calls instead of assuming they succeed.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jon Corbet requested this code moved with the last changeset,
https://lkml.org/lkml/2015/3/1/144,
but the patch was not applied because it missed the Makefile.
Moved spidev_test, spidev_fdx and their Makefile infrastructure.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
User visible:
- Allows BPF scriptlets specify arguments to be fetched using
DWARF info, using a prologue generated at compile/build time (He Kuang, Wang Nan)
- Allow attaching BPF scriptlets to module symbols (Wang Nan)
- Allow attaching BPF scriptlets to userspace code using uprobe (Wang Nan)
- BPF programs now can specify 'perf probe' tunables via its section name,
separating key=val values using semicolons (Wang Nan)
Testing some of these new BPF features:
Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.
# cat ssl.bpf.c
#define SEC(NAME) __attribute__((section(NAME), used))
struct pt_regs;
SEC("func=__inet_lookup_established hnum")
int func(struct pt_regs *ctx, int err, unsigned short port)
{
return err == 0 && port == 443;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf record -a -g -e ssl.bpf.c
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
# perf script | head -30
swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
430a br_handle_frame_finish ([bridge])
48bc br_handle_frame ([bridge])
855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
#
Use 'perf probe' various options to list functions, see what variables can
be collected at any given point, experiment first collecting without a filter,
then filter, use it together with 'perf trace', 'perf top', with or without
callchains, if it explodes, please tell us!
- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry, facilitating
'perf report' output processing by other tools, such as Brendan Gregg's
flamegraph tools (Namhyung Kim)
E.g:
# perf report | grep -v ^# | head
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--12.07%--start_secondary
|
--6.30%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
#
Becomes, in "folded" mode:
# perf report -g folded | grep -v ^# | head -5
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
12.07% cpu_startup_entry;start_secondary
6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle
11.23% call_cpuidle;cpu_startup_entry;start_secondary
5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter
11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state
#
The user can also select one of "count", "period" or "percent" as the first column.
Infrastructure:
- Fix multiple leaks found with valgrind and a refcount
debugger (Masami Hiramatsu)
- Add further 'perf test' entries for BPF and LLVM (Wang Nan)
- Improve 'perf test' to suport subtests, so that the series of tests
performed in the LLVM and BPF main tests appear in the default 'perf test'
output (Wang Nan)
- Move memdup() from tools/perf to tools/lib/string.c (Arnaldo Carvalho de Melo)
- Adopt strtobool() from the kernel into tools/lib/ (Wang Nan)
- Fix selftests_install tools/ Makefile rule (Kevin Hilman)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lH0L
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Allows BPF scriptlets specify arguments to be fetched using
DWARF info, using a prologue generated at compile/build time (He Kuang, Wang Nan)
- Allow attaching BPF scriptlets to module symbols (Wang Nan)
- Allow attaching BPF scriptlets to userspace code using uprobe (Wang Nan)
- BPF programs now can specify 'perf probe' tunables via its section name,
separating key=val values using semicolons (Wang Nan)
Testing some of these new BPF features:
Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.
# cat ssl.bpf.c
#define SEC(NAME) __attribute__((section(NAME), used))
struct pt_regs;
SEC("func=__inet_lookup_established hnum")
int func(struct pt_regs *ctx, int err, unsigned short port)
{
return err == 0 && port == 443;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf record -a -g -e ssl.bpf.c
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
# perf script | head -30
swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
430a br_handle_frame_finish ([bridge])
48bc br_handle_frame ([bridge])
855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
#
Use 'perf probe' various options to list functions, see what variables can
be collected at any given point, experiment first collecting without a filter,
then filter, use it together with 'perf trace', 'perf top', with or without
callchains, if it explodes, please tell us!
- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry, facilitating
'perf report' output processing by other tools, such as Brendan Gregg's
flamegraph tools (Namhyung Kim)
E.g:
# perf report | grep -v ^# | head
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--12.07%--start_secondary
|
--6.30%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
#
Becomes, in "folded" mode:
# perf report -g folded | grep -v ^# | head -5
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
12.07% cpu_startup_entry;start_secondary
6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle
11.23% call_cpuidle;cpu_startup_entry;start_secondary
5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter
11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state
#
The user can also select one of "count", "period" or "percent" as the first column.
Infrastructure changes:
- Fix multiple leaks found with Valgrind and a refcount
debugger (Masami Hiramatsu)
- Add further 'perf test' entries for BPF and LLVM (Wang Nan)
- Improve 'perf test' to suport subtests, so that the series of tests
performed in the LLVM and BPF main tests appear in the default 'perf test'
output (Wang Nan)
- Move memdup() from tools/perf to tools/lib/string.c (Arnaldo Carvalho de Melo)
- Adopt strtobool() from the kernel into tools/lib/ (Wang Nan)
- Fix selftests_install tools/ Makefile rule (Kevin Hilman)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf tool fixes from Thomas Gleixner:
"A couple of fixes for perf tools:
- Build system updates
- Plug a memory leak in an error path of perf probe
- Tear down probes correctly when adding fails
- Fixes to the perf symbol handling
- Fix ordering of event processing in buildid-list
- Fix per DSO filtering in the histogram browser"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Clear probe_trace_event when add_probe_trace_event() fails
perf probe: Fix memory leaking on failure by clearing all probe_trace_events
perf inject: Also re-pipe lost_samples event
perf buildid-list: Requires ordered events
perf symbols: Fix dso lookup by long name and missing buildids
perf symbols: Allow forcing reading of non-root owned files by root
perf hists browser: The dso can be obtained from popup_action->ms.map->dso
perf hists browser: Fix 'd' hotkey action to filter by DSO
perf symbols: Rebuild rbtree when adjusting symbols for kcore
tools: Add a "make all" rule
tools: Actually install tmon in the install rule
PageIdle is exported in include/uapi/linux/kernel-page-flags.h, so let's
make page-types.c tool handle it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Revert three recent intel_pstate driver commits one of which
introduced a regression and the remaining two depend on the
problematic one (Rafael Wysocki).
- Fix breakage related to the recently introduced ACPI _CCA object
support in the PCI DMA setup code (Suravee Suthikulpanit).
- Fix up the recently introduced ACPI CPPC support to only
use the hardware-reduced version of the PCCT structure as
the only architecture to support it (ARM64) will only use
hardware-reduced ACPI anyway (Ashwin Chaugule).
- Fix a cpufreq mediatek driver build problem (Arnd Bergmann).
- Fix the SMBus transaction handling implementation in the ACPI
core to avoid re-entrant calls to wait_event_timeout() which
makes intermittent boot stalls related to the Smart Battery
Subsystem initialization go away and revert a workaround of
another problem with the same underlying root cause (Chris
Bainbridge).
- Fix the generic wakeup interrupts framework to avoid using
invalid IRQ numbers (Dmitry Torokhov).
- Remove a redundant check from the ACPI EC driver (Markus Elfring).
- Modify the intel_pstate driver so it can support more Atom flavors
than just one (Baytrail) and add support for Atom Airmont cores
(which require new freqnency tables) to it (Philippe Longepe).
- Clean up MSR-related symbols in turbostat (Len Brown).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=GFs4
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups (ACPI core, PM core, cpufreq, ACPI
EC driver, device properties) including three reverts of recent
intel_pstate driver commits due to a regression introduced by one of
them plus support for Atom Airmont cores in intel_pstate (which really
boils down to adding new frequency tables for Airmont) and additional
turbostat updates.
Specifics:
- Revert three recent intel_pstate driver commits one of which
introduced a regression and the remaining two depend on the
problematic one (Rafael Wysocki).
- Fix breakage related to the recently introduced ACPI _CCA object
support in the PCI DMA setup code (Suravee Suthikulpanit).
- Fix up the recently introduced ACPI CPPC support to only use the
hardware-reduced version of the PCCT structure as the only
architecture to support it (ARM64) will only use hardware-reduced
ACPI anyway (Ashwin Chaugule).
- Fix a cpufreq mediatek driver build problem (Arnd Bergmann).
- Fix the SMBus transaction handling implementation in the ACPI core
to avoid re-entrant calls to wait_event_timeout() which makes
intermittent boot stalls related to the Smart Battery Subsystem
initialization go away and revert a workaround of another problem
with the same underlying root cause (Chris Bainbridge).
- Fix the generic wakeup interrupts framework to avoid using invalid
IRQ numbers (Dmitry Torokhov).
- Remove a redundant check from the ACPI EC driver (Markus Elfring).
- Modify the intel_pstate driver so it can support more Atom flavors
than just one (Baytrail) and add support for Atom Airmont cores
(which require new freqnency tables) to it (Philippe Longepe).
- Clean up MSR-related symbols in turbostat (Len Brown)"
* tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: Fix OF logic in pci_dma_configure()
Revert "Documentation: kernel_parameters for Intel P state driver"
cpufreq: mediatek: fix build error
cpufreq: intel_pstate: Add separate support for Airmont cores
cpufreq: intel_pstate: Replace BYT with ATOM
Revert "cpufreq: intel_pstate: Use ACPI perf configuration"
Revert "cpufreq: intel_pstate: Avoid calculation for max/min"
ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query()
Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"
ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code
PM / wakeirq: check that wake IRQ is valid before accepting it
ACPI / CPPC: Use h/w reduced version of the PCCT structure
x86: remove unused definition of MSR_NHM_PLATFORM_INFO
tools/power turbostat: use new name for MSR_PLATFORM_INFO
The folded callchain mode is to print all chains in a single line.
Currently perf report --gtk doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flat callchain mode is to print all chains in a simple flat
hierarchy so make it easy to see.
Currently perf report --gtk doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
See the previous commit on TUI support for more information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The folded callchain mode prints all chains in a single line.
Currently perf report --tui doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add flat_val list to
struct callchain_node and show them along with the (normal) val list.
For example, folded callchain looks like below:
$ perf report -g folded --tui
Samples: 234 of event 'cycles:pp', Event count (approx.): 32605268
Overhead Command Shared Object Symbol
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
+ 28.63% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
+ 11.30% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flat callchain mode is to print all chains in a single, simple
hierarchy so make it easy to see.
Currently perf report --tui doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
For example, consider following callchains with '-g graph'.
$ perf report -g graph
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
- cpu_startup_entry
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Before:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
- 28.63% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
- 11.30% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function is to print a single callchain list entry. As this
function will be used by other function, factor out to a separate
function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'. The percent is
same as before and it's the default behavior. The period displays the
raw period value rather than the percentage. The count displays the
number of occurrences.
$ perf report --no-children --stdio -g percent
...
39.93% swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--28.63%-- start_secondary
|
--11.30%-- rest_init
$ perf report --no-children --show-total-period --stdio -g period
...
39.93% 13018705 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--9334403-- start_secondary
|
--3684302-- rest_init
$ perf report --no-children --show-nr-samples --stdio -g count
...
39.93% 80 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--57-- start_secondary
|
--23-- rest_init
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's to track the count of occurrences of the callchains.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support for printing other type of callchain
value like count or period.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org
[ renamed new _sprintf_ operation to _scnprintf_ ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.
For example, the following 20 lines can be printed in 3 lines with the
folded output mode:
$ perf report -g flat --no-children | grep -v ^# | head -20
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
5.88%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
$ perf report -g folded --no-children | grep -v ^# | head -3
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
This mode is supported only for --stdio now and intended to be used by
some scripts like in FlameGraphs[1]. Support for other UI might be
added later.
[1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html
Requested-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix machine__findnew_module_map to drop the reference to the dso because
it is already referenced by both machine__findnew_module_dso() and
map__new2().
Refcnt debugger shows:
==== [1] ====
Unreclaimed dso: 0x1ffd980
Refcount +1 => 1 at
./perf(dso__new+0x1ff) [0x4a62df]
./perf(__dsos__addnew+0x29) [0x4a6e19]
./perf() [0x4b8b91]
./perf(modules__parse+0xfc) [0x4a9d5c]
./perf() [0x4b8460]
./perf(machine__create_kernel_maps+0x150) [0x4bb550]
./perf(machine__new_host+0xfa) [0x4bb75a]
./perf(init_probe_symbol_maps+0x93) [0x506623]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5]
./perf() [0x4220a9]
This map_groups__insert(0x4b8b91) already gets a reference to the new
dso:
----
eu-addr2line -e ./perf -f 0x4b8b91
map_groups__insert inlined at util/machine.c:586 in
machine__create_module
util/map.h:207
----
So this dso refcnt will be released when map_groups gets released.
[snip]
Refcount +1 => 2 at
./perf(dso__get+0x34) [0x4a65f4]
./perf() [0x4b8b35]
./perf(modules__parse+0xfc) [0x4a9d5c]
./perf() [0x4b8460]
./perf(machine__create_kernel_maps+0x150) [0x4bb550]
./perf(machine__new_host+0xfa) [0x4bb75a]
./perf(init_probe_symbol_maps+0x93) [0x506623]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5]
./perf() [0x4220a9]
Here, machine__findnew_module_dso(0x4b8b35) gets the dso (and stores it
in a local variable):
----
# eu-addr2line -e ./perf -f 0x4b8b35
machine__findnew_module_dso inlined at util/machine.c:578 in
machine__create_module
util/machine.c:514
----
Refcount +1 => 3 at
./perf(dso__get+0x34) [0x4a65f4]
./perf(map__new2+0x76) [0x4be1c6]
./perf() [0x4b8b4f]
./perf(modules__parse+0xfc) [0x4a9d5c]
./perf() [0x4b8460]
./perf(machine__create_kernel_maps+0x150) [0x4bb550]
./perf(machine__new_host+0xfa) [0x4bb75a]
./perf(init_probe_symbol_maps+0x93) [0x506623]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5]
./perf() [0x4220a9]
But also map__new2() gets the dso which will be put when the map is
released.
So, we have to drop the constructor reference obtained in
machine__findnew_module_dso().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064035.30709.58824.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__dsos__addnew should drop the constructor reference to dso after adding
it to the list, because __dsos__add() will get a reference that will be
kept while it is in the list.
This fixes DSO leaks when entries are removed to the list and the refcount
never gets to zero.
Refcnt debugger shows:
==== [0] ====
Unreclaimed dso: 0x2fccab0
Refcount +1 => 1 at
./perf(dso__new+0x1ff) [0x4a62df]
./perf(__dsos__addnew+0x29) [0x4a6e19]
./perf(dsos__findnew+0xd1) [0x4a7281]
./perf(machine__findnew_kernel+0x27) [0x4a5e17]
./perf() [0x4b8df2]
./perf(machine__create_kernel_maps+0x28) [0x4bb528]
./perf(machine__new_host+0xfa) [0x4bb84a]
./perf(init_probe_symbol_maps+0x93) [0x506713]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5]
./perf() [0x4220a9]
Refcount +1 => 2 at
./perf(__dsos__addnew+0xfb) [0x4a6eeb]
./perf(dsos__findnew+0xd1) [0x4a7281]
./perf(machine__findnew_kernel+0x27) [0x4a5e17]
./perf() [0x4b8df2]
./perf(machine__create_kernel_maps+0x28) [0x4bb528]
./perf(machine__new_host+0xfa) [0x4bb84a]
./perf(init_probe_symbol_maps+0x93) [0x506713]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5]
./perf() [0x4220a9]
Refcount +1 => 3 at
./perf(dsos__findnew+0x7e) [0x4a722e]
./perf(machine__findnew_kernel+0x27) [0x4a5e17]
./perf() [0x4b8df2]
./perf(machine__create_kernel_maps+0x28) [0x4bb528]
./perf(machine__new_host+0xfa) [0x4bb84a]
./perf(init_probe_symbol_maps+0x93) [0x506713]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5]
./perf() [0x4220a9]
[snip]
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064031.30709.81460.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix dso__load_sym to put the map object which is already
insterted to kmaps.
Refcnt debugger shows
==== [0] ====
Unreclaimed map: 0x39113e0
Refcount +1 => 1 at
./perf(map__new2+0xb5) [0x4be155]
./perf(dso__load_sym+0xee1) [0x503461]
./perf(dso__load_vmlinux+0xbf) [0x4aa6df]
./perf(dso__load_vmlinux_path+0x8c) [0x4aa83c]
./perf() [0x50528a]
./perf(convert_perf_probe_events+0xd79) [0x50ac29]
./perf() [0x45600f]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5]
./perf() [0x4220a9]
Refcount +1 => 2 at
./perf(maps__insert+0x9a) [0x4bfffa]
./perf(dso__load_sym+0xf89) [0x503509]
./perf(dso__load_vmlinux+0xbf) [0x4aa6df]
./perf(dso__load_vmlinux_path+0x8c) [0x4aa83c]
./perf() [0x50528a]
./perf(convert_perf_probe_events+0xd79) [0x50ac29]
./perf() [0x45600f]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5]
./perf() [0x4220a9]
Refcount -1 => 1 at
./perf(map_groups__exit+0x94) [0x4bed04]
./perf(machine__delete+0xb0) [0x4b9300]
./perf(exit_probe_symbol_maps+0x28) [0x506608]
./perf() [0x45628a]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5]
./perf() [0x4220a9]
This means that the dso__load_sym calls map__new2 and maps_insert, both
of them bump the map refcount, but map_groups__exit will drop just one
reference.
Fix it by dropping the refcount after inserting it into kmaps.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064026.30709.50038.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since system_path() returns malloc'd string if given path is not an
absolute path, perf_exec_path() sometimes returns a static string and
sometimes returns a malloc'd string depending on the environment
variables or command options.
This may cause a memory leak because the caller can not unconditionally
free the returned string.
This fixes perf_exec_path() and system_path() to always return a
malloc'd string, so the caller can always free it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151119060453.14210.65666.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Actually machine__exit forgot to call machine__destroy_kernel_maps.
This fixes some memory leaks on map as below.
Without this fix.
----
./perf probe vfs_read
Added new event:
probe:vfs_read (on vfs_read)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read -aR sleep 1
REFCNT: BUG: Unreclaimed objects found.
REFCNT: Total 4 objects are not reclaimed.
To see all backtraces, rerun with -v option
----
With this fix.
----
./perf probe vfs_read
Added new event:
probe:vfs_read (on vfs_read)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read -aR sleep 1
REFCNT: BUG: Unreclaimed objects found.
REFCNT: Total 2 objects are not reclaimed.
To see all backtraces, rerun with -v option
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064024.30709.43577.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix machine object to drop the reference to the map object after it
inserted it into machine->kmaps.
refcnt debugger shows what happened:
----
==== [2] ====
Unreclaimed map: 0x346f750
Refcount +1 => 1 at
./perf(map__new2+0xb5) [0x4bdea5]
./perf() [0x4b8aaf]
./perf(modules__parse+0xfc) [0x4a9cbc]
./perf() [0x4b83c0]
./perf(machine__create_kernel_maps+0x148) [0x4bb208]
./perf(machine__new_host+0xfa) [0x4bb3fa]
./perf(init_probe_symbol_maps+0x93) [0x5062b3]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5]
./perf() [0x4220a9]
Refcount +1 => 2 at
./perf(maps__insert+0x9a) [0x4bfd4a]
./perf() [0x4b8acb]
./perf(modules__parse+0xfc) [0x4a9cbc]
./perf() [0x4b83c0]
./perf(machine__create_kernel_maps+0x148) [0x4bb208]
./perf(machine__new_host+0xfa) [0x4bb3fa]
./perf(init_probe_symbol_maps+0x93) [0x5062b3]
./perf() [0x455ffa]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5]
./perf() [0x4220a9]
Refcount -1 => 1 at
./perf(map_groups__exit+0x94) [0x4bea54]
./perf(machine__delete+0x3d) [0x4b91ed]
./perf(exit_probe_symbol_maps+0x28) [0x506358]
./perf() [0x45628a]
./perf(cmd_probe+0x6c) [0x4566bc]
./perf() [0x47abc5]
./perf(main+0x610) [0x421f90]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5]
./perf() [0x4220a9]
----
This pattern clearly shows that the refcnt of the map is acquired twice
by map__new2 and maps__insert but released onlu once at
map_groups__exit, when we purge its maps rbtree.
Since maps__insert already reference counted the map, we have to drop
the constructor (map__new2) reference count right after inserting it.
These happened in machine__findnew_module_map, as below.
----
# eu-addr2line -e ./perf -f 0x4b8aaf
machine__findnew_module_map inlined at util/machine.c:1046
in machine__create_module
util/machine.c:582
# eu-addr2line -e ./perf -f 0x4b8acb
map_groups__insert inlined at util/machine.c:585
in machine__create_module
util/map.h:208
----
(note that both are at util/machine.c:58X which is
machine__findnew_module_map)
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064020.30709.40499.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since dwarf_cfi_addrframe returns malloc'd Dwarf_Frame object, it has to
be freed after it is used.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151118064011.30709.65674.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes error messages in breaks the pretty output of 'perf test'.
For example:
# mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak}
# perf test LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation :Failed to find the path for kernel: No such file or directory FAILED!
This patch mute test cases thoroughly by redirect their stdout and
stderr to /dev/null when verbose == 0. After applying this patch:
# ./perf test LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : FAILED!
# ./perf test -v LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test :
--- start ---
test child forked, pid 13183
Kernel build dir is set to /lib/modules/4.3.0-rc4+/build
set env: KBUILD_DIR=/lib/modules/4.3.0-rc4+/build
...
bpf: config 'func=null_lseek file->f_mode offset orig' is ok
Looking at the vmlinux_path (7 entries long)
Failed to find the path for kernel: No such file or directory
bpf_probe: failed to convert perf probe eventsFailed to add events selected by BPF
test child finished with -1
---- end ----
Test BPF filter subtest 1: FAILED!
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch prints each sub-tests results for BPF testcases.
Before:
# ./perf test BPF
37: Test BPF filter : Ok
After:
# ./perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
When a failure happens:
# cat ~/.perfconfig
[llvm]
clang-path = "/bin/false"
# ./perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Skip
37.2: Test BPF prologue generation : Skip
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-5-git-send-email-wangnan0@huawei.com
[ Fixed up not to use .func in an anonymous union ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests,
but the result is provided in only one line:
# perf test LLVM
35: Test LLVM searching and compiling : Ok
This patch introduces sub-tests support, allowing 'perf test' to report
result for each sub-tests:
# perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
When a failure happens:
# cat ~/.perfconfig
[llvm]
clang-path = "/bin/false"
# perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : FAILED!
35.2: Test kbuild searching : Skip
35.3: Compile source for BPF prologue generation test : Skip
And:
# rm ~/.perfconfig
# ./perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Skip
35.2: Test kbuild searching : Skip
35.3: Compile source for BPF prologue generation test : Skip
Skip by user:
# ./perf test -s 1,`seq -s , 3 42`
1: vmlinux symtab matches kallsyms : Skip (user override)
2: detect openat syscall event : Ok
...
35: Test LLVM searching and compiling : Skip (user override)
...
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com
[ Changed so that func is not on an anonymous union ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some tests have sub-tests we want to run, so allow passing this.
Wang tried to avoid having to touch all tests, but then, having the
test.func in an anonymous union makes the build fail on older compilers,
like the one in RHEL6, where:
test a = {
.func = foo,
};
fails.
To fix it leave the func pointer in the main structure and pass the subtest
index to all tests, end result function is the same, but we have just one
function pointer, not two, with and without the subtest index as an argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5genj0ficwdmelpoqlds0u4y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit fd88d16c58 ("selftests/seccomp: Be more precise with
syscall arguments.") use PAGE_SIZE directly which lead to build
failure on arm64.
Replace it with generic interface(sysconf(_SC_PAGESIZE)) to fix this
failure.
Build and test successful on x86_64 and arm64.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch allows creating only one BPF program for different
'probe_trace_event'(tev) entries generated by one
'perf_probe_event'(pev) if their prologues are identical.
This is done by comparing the argument list of different tev instances,
and the maps type of prologue and tev using a mapping array. This patch
utilizes qsort to sort the tevs. After sorting, tevs with identical
argument lists will be grouped together.
Test result:
Sample BPF program:
#define SEC(NAME) __attribute__((section(NAME), used))
SEC("inlines=no;"
"func=SyS_dup? oldfd")
int func(void *ctx)
{
return 1;
}
It would probe at SyS_dup2 and SyS_dup3, obtaining oldfd as its
argument.
The following cmdline shows a BPF program being loaded into the kernel
by perf:
# perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog
Before this patch:
# perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog
[1] 24858
lrwx------ 1 root root 64 Nov 14 04:09 3 -> anon_inode:bpf-prog
lrwx------ 1 root root 64 Nov 14 04:09 4 -> anon_inode:bpf-prog
...
After this patch:
# perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog
[1] 25699
lrwx------ 1 root root 64 Nov 14 04:10 3 -> anon_inode:bpf-prog
...
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two bugs in 'perf test BPF' are found when testing BPF prologue without
vmlinux:
# mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak}
# ./perf test BPF
37: Test BPF filter :Failed to find the path for kernel: No such file or directory
Ok
Test BPF should fail in this case.
After this patch:
# ./perf test BPF
37: Test BPF filter :Failed to find the path for kernel: No such file or directory
FAILED!
# mv /lib/modules/4.3.0-rc4+/build/vmlinux{.bak,}
# ./perf test BPF
37: Test BPF filter : Ok
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces a new BPF script to test the BPF prologue adding
routines. The new script probes at null_lseek, which is the function pointer
used when we try to lseek on '/dev/null'.
The null_lseek function is chosen because it is used by function pointers, so
we don't need to consider inlining and LTO.
By extracting file->f_mode, bpf-script-test-prologue.c should know whether the
file is writable or readonly. According to llseek_loop() and
bpf-script-test-prologue.c, one fourth of total lseeks should be collected.
Committer note:
Testing it:
# perf test -v BPF
<SNIP>
Kernel build dir is set to /lib/modules/4.3.0+/build
set env: KBUILD_DIR=/lib/modules/4.3.0+/build
unset env: KBUILD_OPTS
include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
set env: NR_CPUS=4
set env: LINUX_VERSION_CODE=0x40300
set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang
set env: CLANG_OPTIONS=-xc
set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
set env: WORKING_DIR=/lib/modules/4.3.0+/build
set env: CLANG_SOURCE=-
llvm compiling command template: echo '/*
* bpf-script-test-prologue.c
* Test BPF prologue
*/
#ifndef LINUX_VERSION_CODE
# error Need LINUX_VERSION_CODE
# error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
#endif
#define SEC(NAME) __attribute__((section(NAME), used))
#include <uapi/linux/fs.h>
#define FMODE_READ 0x1
#define FMODE_WRITE 0x2
static void (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) =
(void *) 6;
SEC("func=null_lseek file->f_mode offset orig")
int bpf_func__null_lseek(void *ctx, int err, unsigned long f_mode,
unsigned long offset, unsigned long orig)
{
if (err)
return 0;
if (f_mode & FMODE_WRITE)
return 0;
if (offset & 1)
return 0;
if (orig == SEEK_CUR)
return 0;
return 1;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
libbpf: loading object '[bpf_prologue_test]' from buffer
libbpf: section .strtab, size 135, link 0, flags 0, type=3
libbpf: section .text, size 0, link 0, flags 6, type=1
libbpf: section .data, size 0, link 0, flags 3, type=1
libbpf: section .bss, size 0, link 0, flags 3, type=8
libbpf: section func=null_lseek file->f_mode offset orig, size 112, link 0, flags 6, type=1
libbpf: found program func=null_lseek file->f_mode offset orig
libbpf: section license, size 4, link 0, flags 3, type=1
libbpf: license of [bpf_prologue_test] is GPL
libbpf: section version, size 4, link 0, flags 3, type=1
libbpf: kernel version of [bpf_prologue_test] is 40300
libbpf: section .symtab, size 168, link 1, flags 0, type=2
bpf: config program 'func=null_lseek file->f_mode offset orig'
symbol:null_lseek file:(null) line:0 offset:0 return:0 lazy:(null)
parsing arg: file->f_mode into file, f_mode(1)
parsing arg: offset into offset
parsing arg: orig into orig
bpf: config 'func=null_lseek file->f_mode offset orig' is ok
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.3.0+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.3.0+/build/vmlinux
Try to find probe point from debuginfo.
Matched function: null_lseek
Probe point found: null_lseek+0
Searching 'file' variable in context.
Converting variable file into trace event.
converting f_mode in file
f_mode type is unsigned int.
Searching 'offset' variable in context.
Converting variable offset into trace event.
offset type is long long int.
Searching 'orig' variable in context.
Converting variable orig into trace event.
orig type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32
libbpf: don't need create maps for [bpf_prologue_test]
prologue: pass validation
prologue: slow path
prologue: fetch arg 0, base reg is %di
prologue: arg 0: offset 68
prologue: fetch arg 1, base reg is %si
prologue: fetch arg 2, base reg is %dx
add bpf event perf_bpf_probe:func and attach bpf program 3
adding perf_bpf_probe:func
adding perf_bpf_probe:func to 0x51672c0
mmap size 1052672B
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Opening /sys/kernel/debug/tracing//uprobe_events write=1
Parsing probe_events: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32
Group:perf_bpf_probe Event:func probe:p
Writing event: -:perf_bpf_probe/func
test child finished with 0
---- end ----
Test BPF filter: Ok
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-13-git-send-email-wangnan0@huawei.com
[ Added tools/perf/tests/llvm-src-prologue.c to .gitignore ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch generates a prologue for each 'struct probe_trace_event' for
fetching arguments for BPF programs.
After bpf__probe(), iterate over each program to check whether prologues are
required. If none of the 'struct perf_probe_event' programs will attach to have
at least one argument, simply skip preprocessor hooking. For those who a
prologue is required, call bpf__gen_prologue() and paste the original
instruction after the prologue.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch generates a prologue for a BPF program which fetches arguments for
it. With this patch, the program can have arguments as follow:
SEC("lock_page=__lock_page page->flags")
int lock_page(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
This patch passes at most 3 arguments from r3, r4 and r5. r1 is still the ctx
pointer. r2 is used to indicate if dereferencing was done successfully.
This patch uses r6 to hold ctx (struct pt_regs) and r7 to hold stack pointer
for result. Result of each arguments first store on stack:
low address
BPF_REG_FP - 24 ARG3
BPF_REG_FP - 16 ARG2
BPF_REG_FP - 8 ARG1
BPF_REG_FP
high address
Then loaded into r3, r4 and r5.
The output prologue for offn(...off2(off1(reg)))) should be:
r6 <- r1 // save ctx into a callee saved register
r7 <- fp
r7 <- r7 - stack_offset // pointer to result slot
/* load r3 with the offset in pt_regs of 'reg' */
(r7) <- r3 // make slot valid
r3 <- r3 + off1 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7 // result put onto stack
call probe_read // read unsafe pointer
jnei r0, 0, err // error checking
r3 <- (r7) // read result
r3 <- r3 + off2 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7
call probe_read
jnei r0, 0, err
...
/* load r2, r3, r4 from stack */
goto success
err:
r2 <- 1
/* load r3, r4, r5 with 0 */
goto usercode
success:
r2 <- 0
usercode:
r1 <- r6 // restore ctx
// original user code
If all of arguments reside in register (dereferencing is not
required), gen_prologue_fastpath() will be used to create
fast prologue:
r3 <- (r1 + offset of reg1)
r4 <- (r1 + offset of reg2)
r5 <- (r1 + offset of reg3)
r2 <- 0
P.S.
eBPF calling convention is defined as:
* r0 - return value from in-kernel function, and exit value
for eBPF program
* r1 - r5 - arguments from eBPF program to in-kernel function
* r6 - r9 - callee saved registers that in-kernel function will
preserve
* r10 - read-only frame pointer to access stack
Committer note:
At least testing if it builds and loads:
# cat test_probe_arg.c
struct pt_regs;
__attribute__((section("lock_page=__lock_page page->flags"), used))
int func(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
# perf record -e ./test_probe_arg.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
# perf evlist
perf_bpf_probe:lock_page
#
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By extending the syntax of BPF object section names, this patch allows users to
config probing options like what they can do in 'perf probe'.
The error message in 'perf probe' is also updated.
Test result:
For following BPF file test_probe_glob.c:
# cat test_probe_glob.c
__attribute__((section("inlines=no;func=SyS_dup?"), used))
int func(void *ctx)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
#
# ./perf record -e ./test_probe_glob.c ls /
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# ./perf evlist
perf_bpf_probe:func_1
perf_bpf_probe:func
After changing "inlines=no" to "inlines=yes":
# ./perf record -e ./test_probe_glob.c ls /
...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# ./perf evlist
perf_bpf_probe:func_3
perf_bpf_probe:func_2
perf_bpf_probe:func_1
perf_bpf_probe:func
Then test 'force':
Use following program:
# cat test_probe_force.c
__attribute__((section("func=sys_write"), used))
int funca(void *ctx)
{
return 1;
}
__attribute__((section("force=yes;func=sys_write"), used))
int funcb(void *ctx)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
#
# perf record -e ./test_probe_force.c usleep 1
Error: event "func" already exists.
Hint: Remove existing event by 'perf probe -d'
or force duplicates by 'perf probe -f'
or set 'force=yes' in BPF source.
event syntax error: './test_probe_force.c'
\___ Probe point exist. Try 'perf probe -d "*"' and set 'force=yes'
(add -v to see detail)
...
Then replace 'force=no' to 'force=yes':
# vim test_probe_force.c
# perf record -e ./test_probe_force.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
# perf evlist
perf_bpf_probe:func_1
perf_bpf_probe:func
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By extending the syntax of BPF object section names, this patch allows
users to attach BPF programs to symbols in modules. For example:
SEC("module=i915;"
"parse_cmds=i915_parse_cmds")
int parse_cmds(void *ctx)
{
return 1;
}
The implementation is very simple: like what 'perf probe' does, for module,
fill 'uprobe' field in 'struct perf_probe_event'. Other parts will be done
automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new syntax to the BPF object section name to support
probing at uprobe event. Now we can use BPF program like this:
SEC(
"exec=/lib64/libc.so.6;"
"libcwrite=__write"
)
int libcwrite(void *ctx)
{
return 1;
}
Where, in section name of a program, before the main config string, we
can use 'key=value' style options. Now the only option key is "exec",
for uprobes.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-4-git-send-email-wangnan0@huawei.com
[ Changed the separator from \n to ; ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() in dwarf-regs.c is required by BPF
prologue. This patch compiles it if CONFIG_BPF_PROLOGUE is on to avoid
build failure when CONFIG_BPF_PROLOGUE is on but CONFIG_DWARF is not
set.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If both LIBBPF and DWARF are detected, it is possible to create prologue
for eBPF programs to help them access kernel data. HAVE_BPF_PROLOGUE and
CONFIG_BPF_PROLOGUE are added as flags for this feature.
PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced in commit
63ab024a5b ("perf tools:
regs_query_register_offset() infrastructure"), which indicates that an
architecture supports converting name of a register to its offset in
'struct pt_regs'. Without this support, BPF_PROLOGUE should be turned
off.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is a preparation for BPF prologue support which allows
generating a series of BPF bytecode for fetching kernel data before
calling program code. With the newly introduced multiple instances
support, perf is able to create different prologues for different kprobe
points.
Before this patch, a bpf_program can be loaded into kernel only once,
and get the only resulting fd. What this patch does is to allow creating
and loading different variants of one bpf_program, then fetching their
fds.
Here we describe the basic idea in this patch. The detailed description
of the newly introduced APIs can be found in comments in the patch body.
The key of this patch is the new mechanism in bpf_program__load().
Instead of loading BPF program into kernel directly, it calls a
'pre-processor' to generate program instances which would be finally
loaded into the kernel based on the original code. To enable the
generation of multiple instances, libbpf passes an index to the
pre-processor so it know which instance is being loaded.
Pre-processor should be called from libbpf's user (perf) using
bpf_program__set_prep(). The number of instances and the relationship
between indices and the target instance should be clear when calling
bpf_program__set_prep().
To retrieve a fd for a specific instance of a program,
bpf_program__nth_fd() is introduced. It returns the resulting fd
according to index.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[ Enclosed multi-line if/else blocks with {}, (*func_ptr)() -> func_ptr() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copying it to tools/lib/string.c, the counterpart to the kernel's
lib/string.c.
This is preparation for enhancing BPF program configuration, which will
allow config string like 'inlines=yes'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-6-git-send-email-wangnan0@huawei.com
[ Copied it to tools/lib/string.c instead, to make it usable by other tools/ ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That will contain more string functions with counterparts, sometimes
verbatim copies, in the kernel.
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-rah6g97kn21vfgmlramorz6o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix copy/paste error in selftests_install rule which was copy-pasted
from the clean rule but not properly changed.
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Cc: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pali Rohar <pali.rohar@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/1447797261-1775-1-git-send-email-khilman@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ rpm -q glibc
glibc-2.12-1.166.el6_7.1.x86_64
<SNIP>
CC /tmp/build/perf/tests/llvm.o
cc1: warnings being treated as errors
tests/llvm.c: In function ‘test_llvm__fetch_bpf_obj’:
tests/llvm.c:53: error: declaration of ‘index’ shadows a global declaration
/usr/include/string.h:489: error: shadowed declaration is here
<SNIP>
CC /tmp/build/perf/tests/bpf.o
cc1: warnings being treated as errors
tests/bpf.c: In function ‘__test__bpf’:
tests/bpf.c:149: error: declaration of ‘index’ shadows a global declaration
/usr/include/string.h:489: error: shadowed declaration is here
<SNIP>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Fixes: b31de018a6 ("perf test: Enhance the LLVM test: update basic BPF test program")
Fixes: ba1fae431e ("perf test: Add 'perf test BPF'")
Link: http://lkml.kernel.org/n/tip-akpo4r750oya2phxoh9e3447@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
1) Fix list tests in netfilter ingress support, from Florian Westphal.
2) Fix reversal of input and output interfaces in ingress hook
invocation, from Pablo Neira Ayuso.
3) We have a use after free in r8169, caught by Dave Jones, fixed by
Francois Romieu.
4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa.
5) Three ipv6 route handling bug fixes from Martin KaFai Lau:
a) Don't create clone routes not managed by the fib6 tree
b) Don't forget to check expiration of DST_NOCACHE routes.
c) Handle rt->dst.from == NULL properly.
6) Several AF_PACKET fixes wrt transport header setting and SKB
protocol setting, from Daniel Borkmann.
7) Fix thunder driver crash on shutdown, from Pavel Fedin.
8) Several Mellanox driver fixes (max MTU calculations, use of correct
DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron
Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich.
9) Several mv88e6060 DSA driver fixes (wrong bit definitions for
certain registers, etc.) from Neil Armstrong.
10) Make sure to disable preemption while updating per-cpu stats of ip
tunnels, from Jason A. Donenfeld.
11) Various ARM64 bpf JIT fixes, from Yang Shi.
12) Flush icache properly in ARM JITs, from Daniel Borkmann.
13) Fix masking of RX and TX interrupts in ravb driver, from Masaru
Nagai.
14) Fix netdev feature propagation for devices not implementing
->ndo_set_features(). From Nikolay Aleksandrov.
15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare.
16) RAW socket code increments incorrect SNMP counters, fix from Ben
Cartwright-Cox.
17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman.
18) Fix handling of VLAN headers on stacked devices when REORDER is
disabled. From Vlad Yasevich.
19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from
Sabrina Dubroca.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
MAINTAINERS: Update Mellanox's Eth NIC driver entries
net/core: revert "net: fix __netdev_update_features return.." and add comment
af_unix: take receive queue lock while appending new skb
rtnetlink: fix frame size warning in rtnl_fill_ifinfo
net: use skb_clone to avoid alloc_pages failure.
packet: Use PAGE_ALIGNED macro
packet: Don't check frames_per_block against negative values
net: phy: Use interrupts when available in NOLINK state
phy: marvell: Add support for 88E1540 PHY
arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS
macvlan: fix leak in macvlan_handle_frame
ipvlan: fix use after free of skb
ipvlan: fix leak in ipvlan_rcv_frame
vlan: Do not put vlan headers back on bridge and macvlan ports
vlan: Fix untag operations of stacked vlans with REORDER_HEADER off
via-velocity: unconditionally drop frames with bad l2 length
ipg: Remove ipg driver
dl2k: Add support for IP1000A-based cards
snmp: Remove duplicate OUTMCAST stat increment
net: thunder: Check for driver data in nicvf_remove()
...
Use the local uapi headers to keep in sync with "recently" added #define's
(e.g. SKF_AD_VLAN_TPID). Refactored CFLAGS, and bpf_asm doesn't need -I.
Fixes: 3f356385e8 ("filter: bpf_asm: add minimal bpf asm tool")
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf updates from Thomas Gleixner:
"Mostly updates to the perf tool plus two fixes to the kernel core code:
- Handle tracepoint filters correctly for inherited events (Peter
Zijlstra)
- Prevent a deadlock in perf_lock_task_context (Paul McKenney)
- Add missing newlines to some pr_err() calls (Arnaldo Carvalho de
Melo)
- Print full source file paths when using 'perf annotate --print-line
--full-paths' (Michael Petlan)
- Fix 'perf probe -d' when just one out of uprobes and kprobes is
enabled (Wang Nan)
- Add compiler.h to list.h to fix 'make perf-tar-src-pkg' generated
tarballs, i.e. out of tree building (Arnaldo Carvalho de Melo)
- Add the llvm-src-base.c and llvm-src-kbuild.c files, generated by
the 'perf test' LLVM entries, when running it in-tree, to
.gitignore (Yunlong Song)
- libbpf error reporting improvements, using a strerror interface to
more precisely tell the user about problems with the provided
scriptlet, be it in C or as a ready made object file (Wang Nan)
- Do not be case sensitive when searching for matching 'perf test'
entries (Arnaldo Carvalho de Melo)
- Inform the user about objdump failures in 'perf annotate' (Andi
Kleen)
- Improve the LLVM 'perf test' entry, introduce a new ones for BPF
and kbuild tests to check the environment used by clang to compile
.c scriptlets (Wang Nan)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/x86/intel/rapl: Remove the unused RAPL_EVENT_DESC() macro
tools include: Add compiler.h to list.h
perf probe: Verify parameters in two functions
perf session: Add missing newlines to some pr_err() calls
perf annotate: Support full source file paths for srcline fix
perf test: Add llvm-src-base.c and llvm-src-kbuild.c to .gitignore
perf: Fix inherited events vs. tracepoint filters
perf: Disable IRQs across RCU RS CS that acquires scheduler lock
perf test: Do not be case sensitive when searching for matching tests
perf test: Add 'perf test BPF'
perf test: Enhance the LLVM tests: add kbuild test
perf test: Enhance the LLVM test: update basic BPF test program
perf bpf: Improve BPF related error messages
perf tools: Make fetch_kernel_version() publicly available
bpf tools: Add new API bpf_object__get_kversion()
bpf tools: Improve libbpf error reporting
perf probe: Cleanup find_perf_probe_point_from_map to reduce redundancy
perf annotate: Inform the user about objdump failures in --stdio
perf stat: Make stat options global
perf sched latency: Fix thread pid reuse issue
...
Pull liblockdep fixes from Thomas Gleixner:
"Three small patches to synchronize liblockdep with the latest core
changes"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: explicitly declare lockdep API we call from liblockdep
tools/liblockdep: add userspace versions of WRITE_ONCE and RCU_INIT_POINTER
tools/liblockdep: remove task argument from debug_check_no_locks_held
Pull libnvdimm fixes from Dan Williams:
- three fixes tagged for -stable including a crash fix, simple
performance tweak, and an invalid i/o error.
- build regression fix for the nvdimm unit tests
- nvdimm documentation update
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: fix __dax_pmd_fault crash
libnvdimm: documentation clarifications
libnvdimm, pmem: fix size trim in pmem_direct_access()
libnvdimm, e820: fix numa node for e820-type-12 pmem ranges
tools/testing/nvdimm, acpica: fix flag rename build breakage
MSR_PLATFORM_INFO is the new name for MSR_NHM_PLATFORM_INFO
no functional change
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When probing with a glob, errors in add_probe_trace_event() won't be
passed to debuginfo__find_trace_events() because it would be modified by
probe_point_search_cb(). It causes a segfault if perf fails to find an
argument for a probe point matched by the glob. For example:
# ./perf probe -v -n 'SyS_dup? oldfd'
probe-definition(0): SyS_dup? oldfd
symbol:SyS_dup? file:(null) line:0 offset:0 return:0 lazy:(null)
parsing arg: oldfd into oldfd
1 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.3.0-rc4+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.3.0-rc4+/build/vmlinux
Try to find probe point from debuginfo.
Matched function: SyS_dup3
found inline addr: 0xffffffff812095c0
Probe point found: SyS_dup3+0
Searching 'oldfd' variable in context.
Converting variable oldfd into trace event.
oldfd type is long int.
found inline addr: 0xffffffff812096d4
Probe point found: SyS_dup2+36
Searching 'oldfd' variable in context.
Failed to find 'oldfd' in this function.
Matched function: SyS_dup3
Probe point found: SyS_dup3+0
Searching 'oldfd' variable in context.
Converting variable oldfd into trace event.
oldfd type is long int.
Matched function: SyS_dup2
Probe point found: SyS_dup2+0
Searching 'oldfd' variable in context.
Converting variable oldfd into trace event.
oldfd type is long int.
Found 4 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:probe/SyS_dup3 _text+2135488 oldfd=%di:s64
Segmentation fault (core dumped)
#
This patch ensures that add_probe_trace_event() doesn't touches
tf->ntevs and tf->tevs if those functions fail.
After the patch:
# perf probe 'SyS_dup? oldfd'
Failed to find 'oldfd' in this function.
Added new events:
probe:SyS_dup3 (on SyS_dup? with oldfd)
probe:SyS_dup3_1 (on SyS_dup? with oldfd)
probe:SyS_dup2 (on SyS_dup? with oldfd)
You can now use it in all perf tools, such as:
perf record -e probe:SyS_dup2 -aR sleep 1
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447417761-156094-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix memory leaking on the debuginfo__find_trace_events() failure path
which frees an array of probe_trace_events but doesn't clears all the
allocated sub-structures and strings.
So, before doing zfree(tevs), clear all the array elements which may
have allocated resources.
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447417761-156094-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf buildid-list' processes events to determine hits (i.e. with-hits
option). That may not work if events are not sorted in order. i.e. MMAP
events must be processed before the samples that depend on them so that
sample processing can 'hit' the DSO to which the MMAP refers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1447408112-1920-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4598a0a6d2 ("perf symbols: Improve DSO long names lookup speed
with rbtree") Added a tree to lookup dsos by long name. That tree gets
corrupted whenever a dso long name is changed because the tree is not
updated.
One effect of that is buildid-list does not work with the 'with-hits'
option because dso lookup fails and results in two structs for the same
dso. The first has the buildid but no hits, the second has hits but no
buildid. e.g.
Before:
$ tools/perf/perf record ls
arch certs CREDITS Documentation firmware include
ipc Kconfig lib Makefile net REPORTING-BUGS
scripts sound usr block COPYING crypto
drivers fs init Kbuild kernel MAINTAINERS
mm README samples security tools virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data (11 samples) ]
$ tools/perf/perf buildid-list
574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms]
30c94dc66a1fe95180c3d68d2b89e576d5ae213c /lib/x86_64-linux-gnu/libc-2.19.so
$ tools/perf/perf buildid-list -H
574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms]
0000000000000000000000000000000000000000 /lib/x86_64-linux-gnu/libc-2.19.so
After:
$ tools/perf/perf buildid-list -H
574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms]
30c94dc66a1fe95180c3d68d2b89e576d5ae213c /lib/x86_64-linux-gnu/libc-2.19.so
The fix is to record the root of the tree on the dso so that
dso__set_long_name() can update the tree when the long name changes.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Fixes: 4598a0a6d2 ("perf symbols: Improve DSO long names lookup speed with rbtree")
Link: http://lkml.kernel.org/r/1447408112-1920-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the root user tries to read a file owned by some other user we get:
# ls -la perf.data
-rw-------. 1 acme acme 20032 Nov 12 15:50 perf.data
# perf report
File perf.data not owned by current user or root (use -f to override)
# perf report -f | grep -v ^# | head -2
30.96% ls [kernel.vmlinux] [k] do_set_pte
28.24% ls libc-2.20.so [.] intel_check_word
#
That wasn't happening when the symbol code tried to read a JIT map,
where the same check was done but no forcing was possible, fix it.
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/2380
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So no need to have a 'dso' member in 'popup_action', remove it as no
code is using it, already.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-76a6s0007slug0op0wkl6o8b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When pressing 'd' the expected action is to filter all entries by the
DSO in the current entry, but for that the action->map needs to be set,
and only action->dso was being set, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 045b80dd03 ("perf hists browser: Use the map to determine if a DSO is being used as a kernel")
Link: http://lkml.kernel.org/n/tip-xqhfzgoblq49lk5h5u82atro@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally symbols are read from the DSO and adjusted, if need be, so that
the symbol start matches the file offset in the DSO file (we want the
file offset because that is what we know from MMAP events). That is done
by dso__load_sym() which inserts the symbols *after* adjusting them.
In the case of kcore, the symbols have been read from kallsyms and the
symbol start is the memory address. The symbols have to be adjusted to
match the kcore file offsets. dso__split_kallsyms_for_kcore() does that,
but now the adjustment is being done *after* the symbols have been
inserted. It appears dso__split_kallsyms_for_kcore() was assuming that
changing the symbol start would not change the order in the rbtree -
which is, of course, not guaranteed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/563CB241.2090701@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Support for the ACPI _CCA configuration object intended to tell
the OS whether or not a bus master device supports hardware
managed cache coherency and a new set of functions to allow
drivers to check the cache coherency support for devices in a
platform firmware interface agnostic way (Suravee Suthikulpanit,
Jeremy Linton).
- ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X
(Aaron Lu, Hans de Goede).
- Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers
(Jon Medhurst, Nicolas Pitre).
- kfree()-related fixup for the recently introduced CPPC cpufreq
frontend (Markus Elfring).
- intel_pstate fix reducing kernel log noise on systems where
P-states are managed by hardware (Prarit Bhargava).
- intel_pstate maintainers information update (Srinivas Pandruvada).
- cpufreq core optimization related to the handling of delayed work
items used by governors (Viresh Kumar).
- Locking fixes and cleanups of the Operating Performance Points
(OPP) framework (Viresh Kumar).
- Generic power domains framework cleanups (Lina Iyer).
- cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan,
Thomas Renninger).
- turbostat tool updates (Len Brown).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=XZiP
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"The only new feature in this batch is support for the ACPI _CCA device
configuration object, which it a pre-requisite for future ACPI PCI
support on ARM64, but should not affect the other architectures.
The rest is fixes and cleanups, mostly in cpufreq (including
intel_pstate), the Operating Performace Points (OPP) framework and
tools (cpupower and turbostat).
Specifics:
- Support for the ACPI _CCA configuration object intended to tell the
OS whether or not a bus master device supports hardware managed
cache coherency and a new set of functions to allow drivers to
check the cache coherency support for devices in a platform
firmware interface agnostic way (Suravee Suthikulpanit, Jeremy
Linton).
- ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X
(Aaron Lu, Hans de Goede).
- Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers
(Jon Medhurst, Nicolas Pitre).
- kfree()-related fixup for the recently introduced CPPC cpufreq
frontend (Markus Elfring).
- intel_pstate fix reducing kernel log noise on systems where
P-states are managed by hardware (Prarit Bhargava).
- intel_pstate maintainers information update (Srinivas Pandruvada).
- cpufreq core optimization related to the handling of delayed work
items used by governors (Viresh Kumar).
- Locking fixes and cleanups of the Operating Performance Points
(OPP) framework (Viresh Kumar).
- Generic power domains framework cleanups (Lina Iyer).
- cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas
Renninger).
- turbostat tool updates (Len Brown)"
* tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
PCI: ACPI: Add support for PCI device DMA coherency
PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
of/pci: Fix pci_get_host_bridge_device leak
device property: ACPI: Remove unused DMA APIs
device property: ACPI: Make use of the new DMA Attribute APIs
device property: Adding DMA Attribute APIs for Generic Devices
ACPI: Adding DMA Attribute APIs for ACPI Device
device property: Introducing enum dev_dma_attr
ACPI: Honor ACPI _CCA attribute setting
cpufreq: CPPC: Delete an unnecessary check before the function call kfree()
PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()
PM / OPP: Hold dev_opp_list_lock for writers
PM / OPP: Protect updates to list_dev with mutex
PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus()
cpufreq: s5pv210-cpufreq: fix wrong do_div() usage
MAINTAINERS: update for intel P-state driver
Creating a common structure initialization pattern for struct option
cpupower: Enable disabled Cstates if they are below max latency
cpupower: Remove debug message when using cpupower idle-set -D switch
cpupower: cpupower monitor reports uninitialized values for offline cpus
...
Commit ca321d1ca6 "ACPICA: Update NFIT table to rename a flags field"
performed a tree-wide s/ACPI_NFIT_MEM_ARMED/ACPI_NFIT_MEM_NOT_ARMED/
operation, but missed the tools/testing/nvdimm/ directory.
Cc: Bob Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* pm-tools:
Creating a common structure initialization pattern for struct option
cpupower: Enable disabled Cstates if they are below max latency
cpupower: Remove debug message when using cpupower idle-set -D switch
cpupower: cpupower monitor reports uninitialized values for offline cpus
tools/power turbostat: bugfix: print MAX_NON_TURBO_RATIO
tools/power turbostat: simplify Bzy_MHz calculation
list.h needs WRITE_ONCE() since 7f5f873c6a ("rculist: Use WRITE_ONCE()
when deleting from reader-visible list") add it before including the
kernel's list.h file.
This fixes builds of 'make perf-tar-src-pkg' perf tool tarball builds,
i.e. out of tree builds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e0rb8f7jwz0jn24ttyick9u6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On kernel with only one out of CONFIG_KPROBE_EVENTS and
CONFIG_UPROBE_EVENTS enabled, 'perf probe -d' causes a segfault because
perf_del_probe_events() calls probe_file__get_events() with a negative
fd.
This patch fixes it by adding parameter validation at the entry of
probe_file__get_events() and probe_file__get_rawlist(). Since they are
both non-static public functions (in .h file), parameter verifying is
required.
v1 -> v2: Verify fd at the head of probe_file__get_rawlist() instead of
checking at call site (suggested by Masami and Arnaldo at [1,2]).
[1] http://lkml.kernel.org/r/50399556C9727B4D88A595C8584AAB37526048E3@GSjpTKYDCembx32.service.hitachi.net
[2] http://lkml.kernel.org/r/20151105155830.GV13236@kernel.org
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446803415-83382-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
[acme@zoo linux]$ perf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
non matching sample_type[acme@zoo linux]$
After:
[acme@zoo linux]$ perf evlist
WARNING: The perf.data file's data size field is 0 which is unexpected.
Was the 'perf record' command properly terminated?
non matching sample_type
[acme@zoo linux]$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wscok3a2s7yrj8156oc2r6qe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --full-paths option did not show the full source file paths in the 'perf
annotate' tool, because the value of the option was not propagated into the
related functions.
With this patch the value of the --full-paths option is known to the function
that composes the srcline string, so it prints the full path when necessary.
Committer Note:
This affects annotate when the --print-line option is used:
# perf annotate -h 2>&1 | grep print-line
-l, --print-line print matching source lines (may be slow)
Looking just at the lines that should be affected by this change:
Before:
# perf annotate --print-line --full-paths --stdio fput | grep '\.[ch]:[0-9]\+'
94.44 atomic64_64.h:114
5.56 file_table.c:265
file_table.c:265 5.56 : ffffffff81219a00: callq ffffffff81769360 <__fentry__>
atomic64_64.h:114 94.44 : ffffffff81219a05: lock decq 0x38(%rdi)
After:
# perf annotate --print-line --full-paths --stdio fput | grep '\.[ch]:[0-9]\+'
94.44 /home/git/linux/arch/x86/include/asm/atomic64_64.h:114
5.56 /home/git/linux/fs/file_table.c:265
/home/git/linux/fs/file_table.c:265 5.56 : ffffffff81219a00: callq ffffffff81769360 <__fentry__>
/home/git/linux/arch/x86/include/asm/atomic64_64.h:114 94.44 : ffffffff81219a05: lock decq 0x38(%rdi)
#
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/2365
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull thermal updates from Zhang Rui:
- Implement generic devfreq cooling mechanism through frequency
reduction for devices using devfreq. From Ørjan Eide and Javi
Merino.
- Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack
and Eduardo Valentin.
- A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and
Rockchip thermal drivers.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits)
thermal: exynos: Directly return 0 instead of using local ret variable
thermal: exynos: Remove unneeded semicolon
thermal: exynos: Use IS_ERR() because regulator cannot be NULL
thermal: exynos: Fix first temperature read after registering sensor
thermal: exynos: Fix unbalanced regulator disable on probe failure
devfreq_cooling: return on allocation failure
thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r
dt-bindings: rockchip-thermal: Add the pinctrl states in this document
thermal: devfreq_cooling: Make power a u64
thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister
thermal: underflow bug in imx_set_trip_temp()
thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula
thermal: imx: register irq handler later in probe
thermal: rockhip: fix setting thermal shutdown polarity
thermal: rockchip: fix handling of invalid readings
devfreq_cooling: add trace information
thermal: Add devfreq cooling
PM / OPP: get the voltage for all OPPs
tools/thermal: tmon: use pkg-config also for CFLAGS
linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS
...
Merge final patch-bomb from Andrew Morton:
"Various leftovers, mainly Christoph's pci_dma_supported() removals"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
pci: remove pci_dma_supported
usbnet: remove ifdefed out call to dma_supported
kaweth: remove ifdefed out call to dma_supported
sfc: don't call dma_supported
nouveau: don't call pci_dma_supported
netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported
cx23885: use pci_set_dma_mask insted of pci_dma_supported
cx25821: use pci_set_dma_mask insted of pci_dma_supported
cx88: use pci_set_dma_mask insted of pci_dma_supported
saa7134: use pci_set_dma_mask insted of pci_dma_supported
saa7164: use pci_set_dma_mask insted of pci_dma_supported
tw68-core: use pci_set_dma_mask insted of pci_dma_supported
pcnet32: use pci_set_dma_mask insted of pci_dma_supported
lib/string.c: add ULL suffix to the constant definition
hugetlb: trivial comment fix
selftests/mlock2: add ULL suffix to 64-bit constants
selftests/mlock2: add missing #define _GNU_SOURCE
This 12 patch update for 4.4-rc1 consists of a new pstore
test and fixes to existing tests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MM4D
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This 12 patch update for 4.4-rc1 consists of a new pstore test and
fixes to existing tests"
* tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoint: Actually build it
selftests: vm: Try harder to allocate huge pages
selftests: Make scripts executable
selftests: kprobe: Choose an always-defined function to probe
selftests: memfd: Stop unnecessary rebuilds
selftests: Add missing #include directives
selftests/seccomp: Be more precise with syscall arguments.
selftests/seccomp: build and pass on arm64
selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned
selftests/pstore: add pstore test scripts going with reboot
selftests/pstore: add pstore test script for pre-reboot
selftests: add .gitignore for efivarfs
On 32-bit (e.g. m68k):
mlock2-tests.c: In function 'lock_check':
mlock2-tests.c:293: warning: integer constant is too large for 'long' type
mlock2-tests.c:294: warning: integer constant is too large for 'long' type
mlock2-tests.c:299: warning: integer constant is too large for 'long' type
...
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On glibc 2.3.6:
mlock2-tests.c: In function 'seek_to_smaps_entry':
mlock2-tests.c:158: warning: implicit declaration of function 'getline'
According to the manpage of getline(), it needs _GNU_SOURCE before glibc
2.10.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1/ Add support for the ACPI 6.0 NFIT hot add mechanism to process
updates of the NFIT at runtime.
2/ Teach the coredump implementation how to filter out DAX mappings.
3/ Introduce NUMA hints for allocations made by the pmem driver, and as
a side effect all devm allocations now hint their NUMA node by
default.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a2/L
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Outside of the new ACPI-NFIT hot-add support this pull request is more
notable for what it does not contain, than what it does. There were a
handful of development topics this cycle, dax get_user_pages, dax
fsync, and raw block dax, that need more more iteration and will wait
for 4.5.
The patches to make devm and the pmem driver NUMA aware have been in
-next for several weeks. The hot-add support has not, but is
contained to the NFIT driver and is passing unit tests. The coredump
support is straightforward and was looked over by Jeff. All of it has
received a 0day build success notification across 107 configs.
Summary:
- Add support for the ACPI 6.0 NFIT hot add mechanism to process
updates of the NFIT at runtime.
- Teach the coredump implementation how to filter out DAX mappings.
- Introduce NUMA hints for allocations made by the pmem driver, and
as a side effect all devm allocations now hint their NUMA node by
default"
* tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
coredump: add DAX filtering for FDPIC ELF coredumps
coredump: add DAX filtering for ELF coredumps
acpi: nfit: Add support for hot-add
nfit: in acpi_nfit_init, break on a 0-length table
pmem, memremap: convert to numa aware allocations
devm_memremap_pages: use numa_mem_id
devm: make allocations numa aware by default
devm_memremap: convert to return ERR_PTR
devm_memunmap: use devres_release()
pmem: kill memremap_pmem()
x86, mm: quiet arch_add_memory()
Core:
- Fix rtctest error path
New drivers:
- Microcrystal RV8803
Subsystem wide cleanups:
- remove misuse of IRQF_NO_SUSPEND flag
Drivers:
- at91rm9200: clear RTC alarm status flag prior to suspending
- davinci: remove incorrect reference to probe function
- ds1307: Fix alarm programming for mcp794xx
- ds1390: trickle charger support, fix ds1390_get_reg
- isl1208: Pass the IRQF_ONESHOT flag
- opal: fix type of token
- pcf2127: fix RTC_READ_VL, remove useless driver version
- pcf85063: return an error when date is invalid
- pcf8563: add CLKOUT to common clock framework
- rx8025: remove unnecessary braces
- s3c: Set year, month, day value for setting alarm
- stmp3xxx: unify register access macros
- License fixes: pcf2127, da9063
- wakeup-source support for isl12057 and opal
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sY2D
-----END PGP SIGNATURE-----
Merge tag 'rtc-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Core:
- Fix rtctest error path
New drivers:
- Microcrystal RV8803
Subsystem wide cleanups:
- remove misuse of IRQF_NO_SUSPEND flag
Drivers:
- at91rm9200: clear RTC alarm status flag prior to suspending
- davinci: remove incorrect reference to probe function
- ds1307: Fix alarm programming for mcp794xx
- ds1390: trickle charger support, fix ds1390_get_reg
- isl1208: Pass the IRQF_ONESHOT flag
- opal: fix type of token
- pcf2127: fix RTC_READ_VL, remove useless driver version
- pcf85063: return an error when date is invalid
- pcf8563: add CLKOUT to common clock framework
- rx8025: remove unnecessary braces
- s3c: Set year, month, day value for setting alarm
- stmp3xxx: unify register access macros
- License fixes: pcf2127, da9063
- wakeup-source support for isl12057 and opal"
* tag 'rtc-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (23 commits)
rtc: Add a driver for Micro Crystal RV8803
rtc: s3c: Set year, month, day value for setting alarm
rtc: ds1307: Fix alarm programming for mcp794xx
rtc: isl12057: enable support for the standard "wakeup-source" property
rtc: opal: enable support for the stardard "wakeup-source" property
rtc: isl1208: Pass the IRQF_ONESHOT flag
rtc: pcf8563: add CLKOUT to common clock framework
rtc: davinci: remove incorrect reference to probe function
rtc: at91rm9200: clear RTC alarm status flag prior to suspending
rtc: pcf2127: remove useless driver version
rtc: pcf2127: fix reading uninitialized value on RTC_READ_VL ioctl
rtc: stmp3xxx: unify register access macros
rtc: da9063: GPL copyright inconsistency fix
rtc: pcf85063: return an error when date is invalid
rtc: rx8025: remove unnecessary braces
rtc: ds1343: remove misuse of IRQF_NO_SUSPEND flag
rtc: ab8500: remove misuse of IRQF_NO_SUSPEND flag
rtc: pl031: remove misuse of IRQF_NO_SUSPEND flag
rtc: opal: fix type of token
rtc: ds1390: Add trickle charger device tree binding
...
Pull liblockdep fixes from Sasha Levin:
" ... three fixes for liblockdep. Just keeping up with kernel
code changes and new gcc versions."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- libbpf error reporting improvements, using a strerror interface to
more precisely tell the user about problems with the provided
scriptlet, be it in C or as a ready made object file (Wang Nan)
- Do not be case sensitive when searching for matching 'perf test'
entries (Arnaldo Carvalho de Melo)
- Inform the user about objdump failures in 'perf annotate' (Andi Kleen)
Infrastructure:
- Improve the LLVM 'perf test' entry, introduce a new ones for
BPF and kbuild tests to check the environment used by clang to
compile .c scriptlets (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9MjN
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Fixes:
- libbpf error reporting improvements, using a strerror interface to
more precisely tell the user about problems with the provided
scriptlet, be it in C or as a ready made object file (Wang Nan)
- Do not be case sensitive when searching for matching 'perf test'
entries (Arnaldo Carvalho de Melo)
- Inform the user about objdump failures in 'perf annotate' (Andi Kleen)
Infrastructure changes:
- Improve the LLVM 'perf test' entry, introduce a new ones for
BPF and kbuild tests to check the environment used by clang to
compile .c scriptlets (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It seems that newer gcc complains about lack of explicit declaration for some
of the API we use, add it in.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
These were added to the kernel code in cee34d88c ("lockdep: Fix a race between
/proc/lock_stat and module unload"). There's nothing special we need to do
about them in userspace.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
The tas argument was removed from the kernel code in 1b1d2fb4 ("lockdep:
remove task argument from debug_check_no_locks_held"). Remove it in loblockdep
too.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Before:
# perf test llvm
# perf test LLVM
35: Test LLVM searching and compiling : Ok
#
After
# perf test llvm
35: Test LLVM searching and compiling : Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c1u05npqbf6epse17ovfejoj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds BPF testcase for testing BPF event filtering.
By utilizing the result of 'perf test LLVM', this patch compiles the
eBPF sample program then test its ability. The BPF script in 'perf test
LLVM' lets only 50% samples generated by epoll_pwait() to be captured.
This patch runs that system call for 111 times, so the result should
contain 56 samples.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a kbuild testcase to check whether kernel headers can be
correctly found.
For example:
# mv /lib/modules/4.3.0-rc5{,.bak}
# perf test LLVM
38: Test LLVM searching and compiling : Skip
# perf test -v LLVM
...
<stdin>:11:10: fatal error: 'uapi/linux/fs.h' file not found
#include <uapi/linux/fs.h>
^
1 error generated.
ERROR: unable to compile -
Hint: Check error message shown above.
Hint: You can also pre-compile it into .o using:
clang -target bpf -O2 -c -
with proper -I and -D options.
Failed to compile test case: 'Test kbuild searching'
test child finished with -2
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch replaces the original toy BPF program with the previously
introduced bpf-script-example.c. Dynamically embeddeding it into
'llvm-src-base.c'.
The newly introduced BPF program attaches a BPF program to
'sys_epoll_pwait()'. perf itself never use that syscall, so further test
can verify their result with it. The program would generate 1 sample in
every 2 calls of epoll_pwait() system call.
Since the resulting BPF object is useful per se for further tests,
test_llvm__fetch_bpf_obj() is introduced for creating BPF objects from
source. The LLVM test was rewritten to use it.
Committer note:
Running it:
[root@zoo wb]# perf test -v LLVM
35: Test LLVM searching and compiling :
--- start ---
test child forked, pid 17740
Kernel build dir is set to /lib/modules/4.3.0-rc1+/build
set env: KBUILD_DIR=/lib/modules/4.3.0-rc1+/build
unset env: KBUILD_OPTS
include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
set env: NR_CPUS=4
set env: LINUX_VERSION_CODE=0x40300
set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang
set env: CLANG_OPTIONS=-xc
set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
set env: WORKING_DIR=/lib/modules/4.3.0-rc1+/build
set env: CLANG_SOURCE=-
llvm compiling command template: echo '/*
* bpf-script-example.c
* Test basic LLVM building
*/
#ifndef LINUX_VERSION_CODE
# error Need LINUX_VERSION_CODE
# error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
#endif
#define BPF_ANY 0
#define BPF_MAP_TYPE_ARRAY 2
#define BPF_FUNC_map_lookup_elem 1
#define BPF_FUNC_map_update_elem 2
static void *(*bpf_map_lookup_elem)(void *map, void *key) =
(void *) BPF_FUNC_map_lookup_elem;
static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) =
(void *) BPF_FUNC_map_update_elem;
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def SEC("maps") flip_table = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_epoll_pwait")
int bpf_func__sys_epoll_pwait(void *ctx)
{
int ind =0;
int *flag = bpf_map_lookup_elem(&flip_table, &ind);
int new_flag;
if (!flag)
return 0;
/* flip flag and store back */
new_flag = !*flag;
bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY);
return new_flag;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
test child finished with 0
---- end ----
Test LLVM searching and compiling: Ok
[root@zoo wb]#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A series of bpf loader related error codes were introduced to help error
reporting. Functions were improved to return these new error codes.
Functions which return pointers were adjusted to encode error codes into
return value using the ERR_PTR() interface.
bpf_loader_strerror() was improved to convert these error messages to
strings. It checks the error codes and calls libbpf_strerror() and
strerror_r() accordingly, so caller don't need to consider checking the
range of the error code.
In bpf__strerror_load(), print kernel version of running kernel and the
object's 'version' section to notify user how to fix his/her program.
v1 -> v2:
Use macro for error code.
Fetch error message based on array index, eliminate for-loop.
Print version strings.
Before:
# perf record -e ./test_kversion_nomatch_program.o sleep 1
event syntax error: './test_kversion_nomatch_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
After:
# perf record -e ./test_kversion_nomatch_program.o ls
event syntax error: './test_kversion_nomatch_program.o'
\___ 'version' (4.4.0) doesn't match running kernel (4.3.0)
SKIP
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com
[ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are 2 places in llvm-utils.c which find kernel version information
through uname. This patch extracts the uname related code into a
fetch_kernel_version() function and puts it into util.h so it can be
reused.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446818135-87310-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_object__get_kversion() can be used to fetch value of object's
'version' section. Following patch will use it for error reporting.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In this patch, a series of libbpf specific error numbers and
libbpf_strerror() are introduced to help reporting errors.
Functions are updated to pass correct the error number through the
CHECK_ERR() macro.
All users of bpf_object__open{_buffer}() and bpf_program__title() in
perf are modified accordingly. In addition, due to the error codes
changing, bpf__strerror_load() is also modified to use them.
bpf__strerror_head() is also changed accordingly so it can parse libbpf
errors. bpf_loader_strerror() is introduced for that purpose, and will
be improved by the following patch.
load_program() is improved not to dump log buffer if it is empty. log
buffer is also used to deduce whether the error was caused by an invalid
program or other problem.
v1 -> v2:
- Using macro for error code.
- Fetch error message based on array index, eliminate for-loop.
- Use log buffer to detect the reason of failure. 3 new error code
are introduced to replace LIBBPF_ERRNO__LOAD.
In v1:
# perf record -e ./test_ill_program.o ls
event syntax error: './test_ill_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
# perf record -e ./test_kversion_nomatch_program.o ls
event syntax error: './test_kversion_nomatch_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
# perf record -e ./test_big_program.o ls
event syntax error: './test_big_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
In v2:
# perf record -e ./test_ill_program.o ls
event syntax error: './test_ill_program.o'
\___ Kernel verifier blocks program loading
SKIP
# perf record -e ./test_kversion_nomatch_program.o
event syntax error: './test_kversion_nomatch_program.o'
\___ Incorrect kernel version
SKIP
(Will be further improved by following patches)
# perf record -e ./test_big_program.o
event syntax error: './test_big_program.o'
\___ Program too big
SKIP
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In find_perf_probe_point_from_map(), the 'ret' variable is initialized
with -ENOENT but overwritten by the return code of
kernel_get_symbol_address_by_name(), and after that it is re-initialized
with -ENOENT again.
Setting ret=-ENOENT twice looks a bit redundant. This avoids the
overwriting and just returns -ENOENT if some error happens to simplify
the code.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-ufp1zgbktzmttcputozneomd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the browser fails to annotate it is difficult for users to find out
what went wrong.
Add some errors for objdump failures that are displayed in the UI.
Note it would be even better to handle these errors smarter, like
falling back to the binary when the debug info is somehow corrupted. But
for now just giving a better error is an improvement.
Committer note:
This works for --stdio, where errors just scroll by the screen:
# perf annotate --stdio intel_idle
Failure running objdump --start-address=0xffffffff81418290 --stop-address=0xffffffff814183ae -l -d --no-show-raw -S -C /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 2>/dev/null|grep -v /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1|expand
Percent | Source code & Disassembly of vmlinux for cycles:pp
------------------------------------------------------------------
And with that one can use that command line to try to find out more about what
happened instead of getting a blank screen, an improvement.
We need tho to improve this further to get it to work with other UIs, like
--tui and --gtk, where it continues showing a blank screen, no messages, as
the pr_err() used is enough just for --stdio.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1446779167-18949-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng
- Refresh ps3_defconfig from Geoff Levand
- Emit GNU & SysV hashes for the vdso from Michael Ellerman
- Define an enum for the bolted SLB indexes from Anshuman Khandual
- Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman
- Add gettimeofday() benchmark from Michael Neuling
- Avoid link stack corruption in __get_datapage() from Michael Neuling
- Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V
- Add ppc64le_defconfig from Michael Ellerman
- pseries: extract of_helpers module from Andy Shevchenko
- Correct string length in pseries_of_derive_parent() from Nathan Fontenot
- Free the MSI bitmap if it was slab allocated from Denis Kirjanov
- Shorten irq_chip name for the SIU from Christophe Leroy
- Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas
- Fix _ALIGN_* errors due to type difference. from Aneesh Kumar K.V
- powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King
- Disable hugepd for 64K page size. from Aneesh Kumar K.V
- Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V
- Make PCI non-optional for pseries from Michael Ellerman
- Individual System V IPC system calls from Sam bobroff
- Add selftest of unmuxed IPC calls from Michael Ellerman
- discard .exit.data at runtime from Stephen Rothwell
- Delete old orphaned PrPMC 280/2800 DTS and boot file. from Paul Gortmaker
- Use of_get_next_parent to simplify code from Christophe Jaillet
- Paginate some xmon output from Sam bobroff
- Add some more elements to the xmon PACA dump from Michael Ellerman
- Allow the tm-syscall selftest to build with old headers from Michael Ellerman
- Run EBB selftests only on POWER8 from Denis Kirjanov
- Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman
- Avoid reference to potentially freed memory in prom.c from Christophe Jaillet
- Quieten boot wrapper output with run_cmd from Geoff Levand
- EEH fixes and cleanups from Gavin Shan
- Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan
- Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman
- Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov
- Fix ps3-lpm white space from Rudhresh Kumar J
- Fix ps3-vuart null dereference from Colin King
- nvram: Add missing kfree in error path from Christophe Jaillet
- nvram: Fix function name in some errors messages. from Christophe Jaillet
- drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen
- agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov
- cxl: Free virtual PHB when removing from Andrew Donnellan
- scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman
- scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman
- Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump
support, a rework of the qoriq clock driver, device tree changes including
qoriq fman nodes, support for a new 85xx board, and some fixes.
- MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x
LocalPlus Bus FIFO with its device tree binding documentation, mpc512x
device tree updates and some minor fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YwcM
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Kconfig: remove BE-only platforms from LE kernel build from Boqun
Feng
- Refresh ps3_defconfig from Geoff Levand
- Emit GNU & SysV hashes for the vdso from Michael Ellerman
- Define an enum for the bolted SLB indexes from Anshuman Khandual
- Use a local to avoid multiple calls to get_slb_shadow() from Michael
Ellerman
- Add gettimeofday() benchmark from Michael Neuling
- Avoid link stack corruption in __get_datapage() from Michael Neuling
- Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar
K.V
- Add ppc64le_defconfig from Michael Ellerman
- pseries: extract of_helpers module from Andy Shevchenko
- Correct string length in pseries_of_derive_parent() from Nathan
Fontenot
- Free the MSI bitmap if it was slab allocated from Denis Kirjanov
- Shorten irq_chip name for the SIU from Christophe Leroy
- Wait 1s for secondaries to enter OPAL during kexec from Samuel
Mendoza-Jonas
- Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V
- powerpc/pseries/hvcserver: don't memset pi_buff if it is null from
Colin Ian King
- Disable hugepd for 64K page size, from Aneesh Kumar K.V
- Differentiate between hugetlb and THP during page walk from Aneesh
Kumar K.V
- Make PCI non-optional for pseries from Michael Ellerman
- Individual System V IPC system calls from Sam bobroff
- Add selftest of unmuxed IPC calls from Michael Ellerman
- discard .exit.data at runtime from Stephen Rothwell
- Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul
Gortmaker
- Use of_get_next_parent to simplify code from Christophe Jaillet
- Paginate some xmon output from Sam bobroff
- Add some more elements to the xmon PACA dump from Michael Ellerman
- Allow the tm-syscall selftest to build with old headers from Michael
Ellerman
- Run EBB selftests only on POWER8 from Denis Kirjanov
- Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael
Ellerman
- Avoid reference to potentially freed memory in prom.c from Christophe
Jaillet
- Quieten boot wrapper output with run_cmd from Geoff Levand
- EEH fixes and cleanups from Gavin Shan
- Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan
- Use of_get_next_parent() in of_get_ibm_chip_id() from Michael
Ellerman
- Fix section mismatch warning in msi_bitmap_alloc() from Denis
Kirjanov
- Fix ps3-lpm white space from Rudhresh Kumar J
- Fix ps3-vuart null dereference from Colin King
- nvram: Add missing kfree in error path from Christophe Jaillet
- nvram: Fix function name in some errors messages, from Christophe
Jaillet
- drivers/macintosh: adb: fix misleading Kconfig help text from Aaro
Koskinen
- agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov
- cxl: Free virtual PHB when removing from Andrew Donnellan
- scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from
Michael Ellerman
- scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building
with O= from Michael Ellerman
- Freescale updates from Scott: Highlights include 64-bit book3e
kexec/kdump support, a rework of the qoriq clock driver, device tree
changes including qoriq fman nodes, support for a new 85xx board, and
some fixes.
- MPC5xxx updates from Anatolij: Highlights include a driver for
MPC512x LocalPlus Bus FIFO with its device tree binding
documentation, mpc512x device tree updates and some minor fixes.
* tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits)
powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc()
powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id()
powerpc/pseries: Correct string length in pseries_of_derive_parent()
powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry
powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)
powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan
powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes
powerpc: handle error case in cpm_muram_alloc()
powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake
powerpc/book3e-64: Enable kexec
powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop
powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32
powerpc/book3e-64/kexec: Enable SMP release
powerpc/book3e-64/kexec: create an identity TLB mapping
powerpc/book3e-64: Don't limit paca to 256 MiB
powerpc/book3e/kdump: Enable crash_kexec_wait_realmode
powerpc/book3e: support CONFIG_RELOCATABLE
powerpc/booke64: Fix args to copy_and_flush
powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts
powerpc/e6500: kexec: Handle hardware threads
...
Test the mmap() flag, and the mlockall() flag. These tests ensure that
pages are not faulted in until they are accessed, that the pages are
unevictable once faulted in, and that VMA splitting and merging works with
the new VM flag. The second test ensures that mlock limits are respected.
Note that the limit test needs to be run a normal user.
Also add tests to use the new mlock2 family of system calls.
[treding@nvidia.com: : Fix mlock2-tests for 32-bit architectures]
[treding@nvidia.com: ensure the mlock2 syscall number can be found]
[treding@nvidia.com: use the right arguments for main()]
Signed-off-by: Eric B Munson <emunson@akamai.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GNUplot `slabinfo -X' stats, collected, for example, using the
following command:
while [ 1 ]; do slabinfo -X >> stats; sleep 1; done
`slabinfo-gnuplot.sh stats' pre-processes collected records
and generate graphs (totals, slabs sorted by size, slabs
sorted by size).
Graphs can be [individually] regenerate with different samples
range and graph width-heigh (-r %d,%d and -s %d,%d options).
To visually compare N `totals' graphs:
slabinfo-gnuplot.sh -t FILE1-totals FILE2-totals ... FILEN-totals
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch.pl complains about globals being explicitly zeroed
out: "ERROR: do not initialise globals to 0 or NULL".
New globals, introduced in this patch set, have no explicit 0
initialization; clean up the old ones to make it less hairy.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix mismatches between usage() output and real opts[] options. Add
missing alternative opt names, e.g., '-S' had no '--Size' opts[] entry,
etc.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce opt "-L|--sort-loss" to sort and output slabs by
loss (waste) in slabcache().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce opt "-N|--lines=K" to limit the number of slabs
being reported in output_slabs().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset adds 'extended' slabinfo mode that provides additional
information:
-- totals summary
-- slabs sorted by size
-- slabs sorted by loss (waste)
The patches also introduces several new slabinfo options to limit the
number of slabs reported, sort slabs by loss (waste); and some fixes.
Extended output example (slabinfo -X -N 2):
Slabcache Totals
----------------
Slabcaches : 91 Aliases : 119->69 Active: 63
Memory used: 199798784 # Loss : 10689376 MRatio: 5%
# Objects : 324301 # PartObj: 18151 ORatio: 5%
Per Cache Average Min Max Total
----------------------------------------------------------------------------
#Objects 5147 1 89068 324301
#Slabs 199 1 3886 12537
#PartSlab 12 0 240 778
%PartSlab 32% 0% 100% 6%
PartObjs 5 0 4569 18151
% PartObj 26% 0% 100% 5%
Memory 3171409 8192 127336448 199798784
Used 3001736 160 121429728 189109408
Loss 169672 0 5906720 10689376
Per Object Average Min Max
-----------------------------------------------------------
Memory 585 8 8192
User 583 8 8192
Loss 2 0 64
Slabs sorted by size
--------------------
Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg
ext4_inode_cache 69948 1736 127336448 3871/0/15 18 3 0 95 a
dentry 89068 288 26058752 3164/0/17 28 1 0 98 a
Slabs sorted by loss
--------------------
Name Objects Objsize Loss Slabs/Part/Cpu O/S O %Fr %Ef Flg
ext4_inode_cache 69948 1736 5906720 3871/0/15 18 3 0 95 a
inode_cache 11628 864 537472 642/0/4 18 2 0 94 a
The last patch in the series addresses Linus' comment from
http://marc.info/?l=linux-mm&m=144148518703321&w=2
(well, it's been some time. sorry.)
gnuplot script takes the slabinfo records file, where every record is a `slabinfo -X'
output. So the basic workflow is, for example, as follows:
while [ 1 ]; do slabinfo -X -N 2 >> stats; sleep 1; done
^C
slabinfo-gnuplot.sh stats
The last command will produce 3 png files (and 3 stats files)
-- graph of slabinfo totals
-- graph of slabs by size
-- graph of slabs by loss
It's also possible to select a range of records for plotting (a range of collected
slabinfo outputs) via `-r 10,100` (for example); and compare totals from several
measurements (to visially compare slabs behaviour (10,50 range)) using
pre-parsed totals files:
slabinfo-gnuplot.sh -r 10,50 -t stats-totals1 .. stats-totals2
This also, technically, supports ktest. Upload new slabinfo to target,
collect the stats and give the resulting stats file to slabinfo-gnuplot
This patch (of 8):
Use getopt constants in `struct option' ->has_arg instead of numerical
representations.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So they can be used in perf stat record command in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The latency subcommand holds a tree of working atoms sorted by thread's
pid/tid. If there's new thread with same pid and tid, the old working atom is
found and assert bug condition is hit in search function:
thread_atoms_search: Assertion `!(thread != atoms->thread)' failed
Changing the sort function to use thread object pointers together with pid and
tid check. This way new thread will never find old one with same pid/tid.
Link: http://lkml.kernel.org/n/tip-o4doazhhv0zax5zshkg8hnys@git.kernel.org
Reported-by: Mohit Agrawal <moagrawa@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446462625-15807-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible that find_perf_probe_point_from_map() fails to find a
symbol but still returns 0 because of an small error when coding:
find_perf_probe_point_from_map() set 'ret' to error code at first, but
also use it to hold return value of kernel_get_symbol_address_by_name().
This patch resets 'ret' to error even kernel_get_symbol_address_by_name()
success, so if !sym, the whole function returns error correctly.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446729565-27592-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -i flag was incorrectly listed as a short flag for --no-inherit. It
should have only been listed as a short flag for --input.
This documentation error has existed since the --input flag was
introduced in 6810fc915f (perf trace: Add
option to analyze events in a file versus live).
Signed-off-by: Peter Feiner <pfeiner@google.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1446657706-14518-1-git-send-email-pfeiner@google.com
Fixes: 6810fc915f ("perf trace: Add option to analyze events in a file versus live")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit ed63f34c02 ("perf tools: Make perf
depend on libbpf") triggers the build of libbpf when building the perf
tools, dynamically creating FEATURE-DUMP.libbpf.
It failed to update the tools/lib/bpf/.gitignore file to have that
prefix, fix it.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 65f041bee7 ("tools lib bpf: Use FEATURE_USER to allow building in the same dir as perf")
Link: http://lkml.kernel.org/r/1446706594-4142-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo suggests to make LINUX_VERSION_CODE works like __func__ and
__FILE__ so user don't need to care setting right linux version too
much. In this patch, perf llvm transfers LINUX_VERSION_CODE macro
through clang cmdline.
[1] http://lkml.kernel.org/r/20151029223744.GK2923@kernel.org
Committer notes:
Before, forgetting to update the version:
# uname -r
4.3.0-rc1+
# cat bpf.c
__attribute__((section("fork=_do_fork"), used))
int fork(void *ctx)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40200;
#
# perf record -e bpf.c sleep 1
event syntax error: 'bpf.c'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
#
After:
# grep version bpf.c
int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE;
# perf record -e bpf.c sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x5ee, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all:
1, exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446636007-239722-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces a new macro "__NR_CPUS__" to perf's embedded clang
compiler, which represent the number of configured CPUs in this system.
BPF programs can use this macro to create a map with the same number of
system CPUs. For example:
struct bpf_map_def SEC("maps") pmu_map = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446636007-239722-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those tests take a long time and sometimes we stop it, so allow randomly
shuffling the tests so that we have a better chance of running more of
them in partial 'make build-test' runs.
Using it just on the 'build-test' target, i.e.:
make -C tools/perf build-test
Is equivalent to:
make SHUF=1 -C tools/perf -f tests/make
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ey7461i9q4k8u0987j8guun6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When new maps are cloned out of split map they are added into origin
map's group, but their groups pointer is not updated.
This could lead to a segfault, because map->groups is expected to be
always set as reported by Markus:
__map__is_kernel (map=map@entry=0x1abb7a0) at util/map.c:238
238 return __machine__kernel_map(map->groups->machine, map->type) =
(gdb) bt
#0 __map__is_kernel (map=map@entry=0x1abb7a0) at util/map.c:238
#1 0x00000000004393e4 in symbol_filter (map=map@entry=0x1abb7a0, sym=sym@entry
#2 0x00000000004fcd4d in dso__load_sym (dso=dso@entry=0x166dae0, map=map@entry
#3 0x00000000004a64e0 in dso__load (dso=0x166dae0, map=map@entry=0x1abb7a0, fi
#4 0x00000000004b941f in map__load (filter=0x4393c0 <symbol_filter>, map=<opti
#5 map__find_symbol (map=0x1abb7a0, addr=40188, filter=0x4393c0 <symbol_filter
...
Adding __map_groups__insert function to add map into groups together
with map->groups pointer update. It takes no lock as opposed to existing
map_groups__insert, as maps__fixup_overlappings(), where it is being
called, already has the necessary lock held.
Using __map_groups__insert to add new maps after map split.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151104140811.GA32664@krava.brq.redhat.com
Fixes: cfc5acd4c8 ("perf top: Filter symbols based on __map__is_kernel(map)")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Here's the big staging driver update for 4.4-rc1. If you were
disappointed for 4.3-rc1 that we didn't contribute enough changesets,
you should be happy with this pull request of over 2400 patches.
But overall we removed more lines of code than we added, which is nice
to see. Full details in the shortlog.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlY6exwACgkQMUfUDdst+ymXiQCeNhbUB5Gv5FZtPevt25reX6wU
IoUAn3+wAsQnwkXhOwaR+15UVJe7/7ua
=s9E4
-----END PGP SIGNATURE-----
Merge tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big staging driver update for 4.4-rc1. If you were
disappointed for 4.3-rc1 that we didn't contribute enough changesets,
you should be happy with this pull request of over 2400 patches.
But overall we removed more lines of code than we added, which is nice
to see. Full details in the shortlog.
All of these have been in linux-next for a while"
Greg, I've never been disappointed in how few commits Staging
contributes to the kernel.. Never.
* tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2431 commits)
Staging: rtl8192u: ieee80211: added missing blank lines
Staging: rtl8192u: ieee80211: removed unnecessary braces
Staging: rtl8192u: ieee80211: corrected block comments
Staging: rtl8192u: ieee80211: corrected indent
Staging: rtl8192u: ieee80211: added missing spaces after if
Staging: rtl8192u: ieee80211: added missing space around '='
Staging: rtl8192u: ieee80211: fixed position of else statements
Staging: rtl8192u: ieee80211: fixed open brace positions
staging: rdma: ipath: Remove unneeded vairable.
staging: rtl8188eu: pwrGrpCnt variable removed in store_pwrindex_offset function
staging: rtl8188eu: new variable for hal_data->MCSTxPowerLevelOriginalOffset[pwrGrpCnt] in store_pwrindex_offset function
staging: rtl8188eu: checkpatch fixes: 'Avoid CamelCase' in hal/bb_cfg.c
staging: rtl8188eu: checkpatch fixes: line over 80 characters splited into two parts
staging: rtl8188eu: checkpatch fixes: alignment should match open parenthesis
staging: rtl8188eu: checkpatch fixes: unnecessary parentheses removed in hal/bb_cfg.c
staging: rtl8188eu: checkpatch fixes: spaces preferred around that '|' in hal/bb_cfg.c
staging: rtl8188eu: operator = replaced by += in loop increment
staging: rtl8188eu: occurrence of the 5 GHz code marked
staging: rtl8188eu: increment placed into for loop header
staging: rtl8188eu: while loop replaced by for loop in rtw_restruct_wmm_ie
...
Here is the big USB patchset for 4.4-rc1.
As usual, most of the changes are in the gadget subsystem, and we
removed a host controller for a device that is no longer in existance,
and probably never was even made public. There is also other minor
driver updates and new device ids, full details in the changelog.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlY6gVMACgkQMUfUDdst+ynLZgCePfhiDuwriaX7osq90HDu8JOc
pTEAn2dBdw2VMPToUlxccR963YSfgu2A
=mMgp
-----END PGP SIGNATURE-----
Merge tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here is the big USB patchset for 4.4-rc1.
As usual, most of the changes are in the gadget subsystem, and we
removed a host controller for a device that is no longer in existance,
and probably never was even made public. There is also other minor
driver updates and new device ids, full details in the changelog.
All of these have been in linux-next for a while"
* tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits)
USB: core: Codestyle fix in urb.c
usb: misc: usb3503: Use i2c_add_driver helper macro
usb: host: lpc32xx: don't unregister phy device
usb: host: lpc32xx: balance clk enable/disable on removal
usb: host: lpc32xx: fix warnings caused by enabling unprepared clock
uwb: drp: Use setup_timer
uwb: neh: Use setup_timer
uwb: rsv: Use setup_timer
USB: qcserial: add Sierra Wireless MC74xx/EM74xx
usb: chipidea: otg: don't wait vbus drops below BSV when starts host
chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()
doc: dt-binding: ci-hdrc-usb2: split vendor specific properties
usb: chipidea: imx: add imx6ul usb support
doc: dt-binding: ci-hdrc-usb2: improve property description
usb: chipidea: imx: add usb support for imx7d
Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry
usb: chipidea: Add support for 'phy-clkgate-delay-us' property
usb: chipidea: Use extcon framework for VBUS and ID detect
usb: gadget: net2280: restore ep_cfg after defect7374 workaround
usb: dwc2: host: Fix use after free w/ simultaneous irqs
...
- ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).
The most significant change is to allow the AML debugger to be
built into the kernel. On top of that there is an update related
to the NFIT table (the ACPI persistent memory interface)
and a few fixes and cleanups.
- ACPI CPPC2 (Collaborative Processor Performance Control v2)
support along with a cpufreq frontend (Ashwin Chaugule).
This can only be enabled on ARM64 at this point.
- New ACPI infrastructure for the early probing of IRQ chips and
clock sources (Marc Zyngier).
- Support for a new hierarchical properties extension of the ACPI
_DSD (Device Specific Data) device configuration object allowing
the kernel to handle hierarchical properties (provided by the
platform firmware this way) automatically and make them available
to device drivers via the generic device properties interface
(Rafael Wysocki).
- Generic device properties API extension to obtain an index of
certain string value in an array of strings, along the lines of
of_property_match_string(), but working for all of the supported
firmware node types, and support for the "dma-names" device
property based on it (Mika Westerberg).
- ACPI core fix to parse the MADT (Multiple APIC Description Table)
entries in the order expected by platform firmware (and mandated
by the specification) to avoid confusion on systems with more than
255 logical CPUs (Lukasz Anaczkowski).
- Consolidation of the ACPI-based handling of PCI host bridges
on x86 and ia64 (Jiang Liu).
- ACPI core fixes to ensure that the correct IRQ number is used to
represent the SCI (System Control Interrupt) in the cases when
it has been re-mapped (Chen Yu).
- New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).
- ACPI EC driver fixes (Lv Zheng).
- Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
Kosina, Rami Rosen, Rasmus Villemoes).
- New mechanism in the PM core allowing drivers to check if the
platform firmware is going to be involved in the upcoming system
suspend or if it has been involved in the suspend the system is
resuming from at the moment (Rafael Wysocki).
This should allow drivers to optimize their suspend/resume
handling in some cases and the changes include a couple of users
of it (the i8042 input driver, PCI PM).
- PCI PM fix to prevent runtime-suspended devices with PME enabled
from being resumed during system suspend even if they aren't
configured to wake up the system from sleep (Rafael Wysocki).
- New mechanism to report the number of a wakeup IRQ that woke up
the system from sleep last time (Alexandra Yates).
- Removal of unused interfaces from the generic power domains
framework and fixes related to latency measurements in that
code (Ulf Hansson, Daniel Lezcano).
- cpufreq core sysfs interface rework to make it handle CPUs that
share performance scaling settings (represented by a common
cpufreq policy object) more symmetrically (Viresh Kumar).
This should help to simplify the CPU offline/online handling among
other things.
- cpufreq core fixes and cleanups (Viresh Kumar).
- intel_pstate fixes related to the Turbo Activation Ratio (TAR)
mechanism on client platforms which causes the turbo P-states
range to vary depending on platform firmware settings (Srinivas
Pandruvada).
- intel_pstate sysfs interface fix (Prarit Bhargava).
- Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
Bhat, Luis de Bethencourt).
- cpuidle mvebu driver cleanups (Russell King).
- OPP (Operating Performance Points) framework code reorganization
to make it more maintainable (Viresh Kumar).
- Intel Broxton support for the RAPL (Running Average Power Limits)
power capping driver (Amy Wiles).
- Assorted power management code fixes and cleanups (Dan Carpenter,
Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
Villemoes).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=1gaH
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"Quite a new features are included this time.
First off, the Collaborative Processor Performance Control interface
(version 2) defined by ACPI will now be supported on ARM64 along with
a cpufreq frontend for CPU performance scaling.
Second, ACPI gets a new infrastructure for the early probing of IRQ
chips and clock sources (along the lines of the existing similar
mechanism for DT).
Next, the ACPI core and the generic device properties API will now
support a recently introduced hierarchical properties extension of the
_DSD (Device Specific Data) ACPI device configuration object. If the
ACPI platform firmware uses that extension to organize device
properties in a hierarchical way, the kernel will automatically handle
it and make those properties available to device drivers via the
generic device properties API.
It also will be possible to build the ACPICA's AML interpreter
debugger into the kernel now and use that to diagnose AML-related
problems more efficiently. In the future, this should make it
possible to single-step AML execution and do similar things.
Interesting stuff, although somewhat experimental at this point.
Finally, the PM core gets a new mechanism that can be used by device
drivers to distinguish between suspend-to-RAM (based on platform
firmware support) and suspend-to-idle (or other variants of system
suspend the platform firmware is not involved in) and possibly
optimize their device suspend/resume handling accordingly.
In addition to that, some existing features are re-organized quite
substantially.
First, the ACPI-based handling of PCI host bridges on x86 and ia64 is
unified and the common code goes into the ACPI core (so as to reduce
code duplication and eliminate non-essential differences between the
two architectures in that area).
Second, the Operating Performance Points (OPP) framework is
reorganized to make the code easier to find and follow.
Next, the cpufreq core's sysfs interface is reorganized to get rid of
the "primary CPU" concept for configurations in which the same
performance scaling settings are shared between multiple CPUs.
Finally, some interfaces that aren't necessary any more are dropped
from the generic power domains framework.
On top of the above we have some minor extensions, cleanups and bug
fixes in multiple places, as usual.
Specifics:
- ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).
The most significant change is to allow the AML debugger to be
built into the kernel. On top of that there is an update related
to the NFIT table (the ACPI persistent memory interface) and a few
fixes and cleanups.
- ACPI CPPC2 (Collaborative Processor Performance Control v2) support
along with a cpufreq frontend (Ashwin Chaugule).
This can only be enabled on ARM64 at this point.
- New ACPI infrastructure for the early probing of IRQ chips and
clock sources (Marc Zyngier).
- Support for a new hierarchical properties extension of the ACPI
_DSD (Device Specific Data) device configuration object allowing
the kernel to handle hierarchical properties (provided by the
platform firmware this way) automatically and make them available
to device drivers via the generic device properties interface
(Rafael Wysocki).
- Generic device properties API extension to obtain an index of
certain string value in an array of strings, along the lines of
of_property_match_string(), but working for all of the supported
firmware node types, and support for the "dma-names" device
property based on it (Mika Westerberg).
- ACPI core fix to parse the MADT (Multiple APIC Description Table)
entries in the order expected by platform firmware (and mandated by
the specification) to avoid confusion on systems with more than 255
logical CPUs (Lukasz Anaczkowski).
- Consolidation of the ACPI-based handling of PCI host bridges on x86
and ia64 (Jiang Liu).
- ACPI core fixes to ensure that the correct IRQ number is used to
represent the SCI (System Control Interrupt) in the cases when it
has been re-mapped (Chen Yu).
- New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).
- ACPI EC driver fixes (Lv Zheng).
- Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
Kosina, Rami Rosen, Rasmus Villemoes).
- New mechanism in the PM core allowing drivers to check if the
platform firmware is going to be involved in the upcoming system
suspend or if it has been involved in the suspend the system is
resuming from at the moment (Rafael Wysocki).
This should allow drivers to optimize their suspend/resume handling
in some cases and the changes include a couple of users of it (the
i8042 input driver, PCI PM).
- PCI PM fix to prevent runtime-suspended devices with PME enabled
from being resumed during system suspend even if they aren't
configured to wake up the system from sleep (Rafael Wysocki).
- New mechanism to report the number of a wakeup IRQ that woke up the
system from sleep last time (Alexandra Yates).
- Removal of unused interfaces from the generic power domains
framework and fixes related to latency measurements in that code
(Ulf Hansson, Daniel Lezcano).
- cpufreq core sysfs interface rework to make it handle CPUs that
share performance scaling settings (represented by a common cpufreq
policy object) more symmetrically (Viresh Kumar).
This should help to simplify the CPU offline/online handling among
other things.
- cpufreq core fixes and cleanups (Viresh Kumar).
- intel_pstate fixes related to the Turbo Activation Ratio (TAR)
mechanism on client platforms which causes the turbo P-states range
to vary depending on platform firmware settings (Srinivas
Pandruvada).
- intel_pstate sysfs interface fix (Prarit Bhargava).
- Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
Bhat, Luis de Bethencourt).
- cpuidle mvebu driver cleanups (Russell King).
- OPP (Operating Performance Points) framework code reorganization to
make it more maintainable (Viresh Kumar).
- Intel Broxton support for the RAPL (Running Average Power Limits)
power capping driver (Amy Wiles).
- Assorted power management code fixes and cleanups (Dan Carpenter,
Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
Villemoes)"
* tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits)
cpufreq: postfix policy directory with the first CPU in related_cpus
cpufreq: create cpu/cpufreq/policyX directories
cpufreq: remove cpufreq_sysfs_{create|remove}_file()
cpufreq: create cpu/cpufreq at boot time
cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask
cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate()
PM / Domains: Merge measurements for PM QoS device latencies
PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
PM / clk: Fix broken build due to non-matching code and header #ifdefs
ACPI / Documentation: add copy_dsdt to ACPI format options
ACPI / sysfs: correctly check failing memory allocation
ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405
ACPI / CPPC: Fix potential memory leak
ACPI / CPPC: signedness bug in register_pcc_channel()
ACPI / PAD: power_saving_thread() is not freezable
ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle
ACPI: Using correct irq when waiting for events
ACPI: Use correct IRQ when uninstalling ACPI interrupt handler
cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
cpuidle: mvebu: clean up multiple platform drivers
...
Instead of every caller deciding whether to call abs or nsec printout
do it all in a single central function. No functional changes.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1446515428-7450-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sw clock metrics printing was missed in the earlier move to
stat-shadow of all the other metric printouts. Move it too.
v2: Fix metrics printing in this version to make bisect safe.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1446515428-7450-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
Pull x86 fpu changes from Ingo Molnar:
"There are two main areas of changes:
- Rework of the extended FPU state code to robustify the kernel's
usage of cpuid provided xstate sizes - and related changes (Dave
Hansen)"
- math emulation enhancements: new modern FPU instructions support,
with testcases, plus cleanups (Denys Vlasnko)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/fpu: Fixup uninitialized feature_name warning
x86/fpu/math-emu: Add support for FISTTP instructions
x86/fpu/math-emu, selftests: Add test for FISTTP instructions
x86/fpu/math-emu: Add support for FCMOVcc insns
x86/fpu/math-emu: Add support for F[U]COMI[P] insns
x86/fpu/math-emu: Remove define layer for undocumented opcodes
x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns
x86/fpu/math-emu: Remove !NO_UNDOC_CODE
x86/fpu: Check CPU-provided sizes against struct declarations
x86/fpu: Check to ensure increasing-offset xstate offsets
x86/fpu: Correct and check XSAVE xstate size calculations
x86/fpu: Add C structures for AVX-512 state components
x86/fpu: Rework YMM definition
x86/fpu/mpx: Rework MPX 'xstate' types
x86/fpu: Add xfeature_enabled() helper instead of test_bit()
x86/fpu: Remove 'xfeature_nr'
x86/fpu: Rework XSTATE_* macros to remove magic '2'
x86/fpu: Rename XFEATURES_NR_MAX
x86/fpu: Rename XSAVE macros
x86/fpu: Remove partial LWP support definitions
...
Pull x86 asm changes from Ingo Molnar:
"The main change in this cycle is another step in the big x86 system
call interface rework by Andy Lutomirski, which moves most of the low
level x86 entry code from assembly to C, for all syscall entries
except native 64-bit system calls:
arch/x86/entry/entry_32.S | 182 ++++------
arch/x86/entry/entry_64_compat.S | 547 ++++++++-----------------------
194 insertions(+), 535 deletions(-)
... our hope is that the final remaining step (converting native
64-bit system calls) will be less painful as all the previous steps,
given that most of the legacies and quirks are concentrated around
native 32-bit and compat environments"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/entry/32: Fix FS and GS restore in opportunistic SYSEXIT
x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on
um/x86: Fix build after x86 syscall changes
x86/asm: Remove the xyz_cfi macros from dwarf2.h
selftests/x86: Style fixes for the 'unwind_vdso' test
x86/entry/64/compat: Document sysenter_fix_flags's reason for existence
x86/entry: Split and inline syscall_return_slowpath()
x86/entry: Split and inline prepare_exit_to_usermode()
x86/entry: Use pt_regs_to_thread_info() in syscall entry tracing
x86/entry: Hide two syscall entry assertions behind CONFIG_DEBUG_ENTRY
x86/entry: Micro-optimize compat fast syscall arg fetch
x86/entry: Force inlining of 32-bit syscall code
x86/entry: Make irqs_disabled checks in exit code depend on lockdep
x86/entry: Remove unnecessary IRQ twiddling in fast 32-bit syscalls
x86/asm: Remove thread_info.sysenter_return
x86/entry/32: Re-implement SYSENTER using the new C path
x86/entry/32: Switch INT80 to the new C syscall path
x86/entry/32: Open-code return tracking from fork and kthreads
x86/entry/compat: Implement opportunistic SYSRETL for compat syscalls
x86/vdso/compat: Wire up SYSENTER and SYSCSALL for compat userspace
...
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Improve accuracy of perf/sched clock on x86. (Adrian Hunter)
- Intel DS and BTS updates. (Alexander Shishkin)
- Intel cstate PMU support. (Kan Liang)
- Add group read support to perf_event_read(). (Peter Zijlstra)
- Branch call hardware sampling support, implemented on x86 and
PowerPC. (Stephane Eranian)
- Event groups transactional interface enhancements. (Sukadev
Bhattiprolu)
- Enable proper x86/intel/uncore PMU support on multi-segment PCI
systems. (Taku Izumi)
- ... misc fixes and cleanups.
The perf tooling team was very busy again with 200+ commits, the full
diff doesn't fit into lkml size limits. Here's an (incomplete) list
of the tooling highlights:
New features:
- Change the default event used in all tools (record/top): use the
most precise "cycles" hw counter available, i.e. when the user
doesn't specify any event, it will try using cycles:ppp, cycles:pp,
etc and fall back transparently until it finds a working counter.
(Arnaldo Carvalho de Melo)
- Integration of perf with eBPF that, given an eBPF .c source file
(or .o file built for the 'bpf' target with clang), will get it
automatically built, validated and loaded into the kernel via the
sys_bpf syscall, which can then be used and seen using 'perf trace'
and other tools.
(Wang Nan)
Various user interface improvements:
- Automatic pager invocation on long help output. (Namhyung Kim)
- Search for more options when passing args to -h, e.g.: (Arnaldo
Carvalho de Melo)
$ perf report -h interface
Usage: perf report [<options>]
--gtk Use the GTK2 interface
--stdio Use the stdio interface
--tui Use the TUI interface
- Show ordered command line options when -h is used or when an
unknown option is specified. (Arnaldo Carvalho de Melo)
- If options are passed after -h, show just its descriptions, not all
options. (Arnaldo Carvalho de Melo)
- Implement column based horizontal scrolling in the hists browser
(top, report), making it possible to use the TUI for things like
'perf mem report' where there are many more columns than can fit in
a terminal. (Arnaldo Carvalho de Melo)
- Enhance the error reporting of tracepoint event parsing, e.g.:
$ oldperf record -e sched:sched_switc usleep 1
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Run 'perf list' for a list of valid events
Now we get the much nicer:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
And after we have those mount point permissions fixed:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
I.e. basically now the event parsing routing uses the strerror_open()
routines introduced by and used in 'perf trace' work. (Jiri Olsa)
- Fail properly when pattern matching fails to find a tracepoint,
i.e. '-e non:existent' was being correctly handled, with a proper
error message about that not being a valid event, but '-e
non:existent*' wasn't, fix it. (Jiri Olsa)
- Do event name substring search as last resort in 'perf list'.
(Arnaldo Carvalho de Melo)
E.g.:
# perf list clock
List of pre-defined events (to be used in -e):
cpu-clock [Software event]
task-clock [Software event]
uncore_cbox_0/clockticks/ [Kernel PMU event]
uncore_cbox_1/clockticks/ [Kernel PMU event]
kvm:kvm_pvclock_update [Tracepoint event]
kvm:kvm_update_master_clock [Tracepoint event]
power:clock_disable [Tracepoint event]
power:clock_enable [Tracepoint event]
power:clock_set_rate [Tracepoint event]
syscalls:sys_enter_clock_adjtime [Tracepoint event]
syscalls:sys_enter_clock_getres [Tracepoint event]
syscalls:sys_enter_clock_gettime [Tracepoint event]
syscalls:sys_enter_clock_nanosleep [Tracepoint event]
syscalls:sys_enter_clock_settime [Tracepoint event]
syscalls:sys_exit_clock_adjtime [Tracepoint event]
syscalls:sys_exit_clock_getres [Tracepoint event]
syscalls:sys_exit_clock_gettime [Tracepoint event]
syscalls:sys_exit_clock_nanosleep [Tracepoint event]
syscalls:sys_exit_clock_settime [Tracepoint event]
Intel PT hardware tracing enhancements:
- Accept a zero --itrace period, meaning "as often as possible". In
the case of Intel PT that is the same as a period of 1 and a unit
of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter)
- Harmonize itrace's synthesized callchains with the existing
--max-stack tool option. (Adrian Hunter)
- Allow time to be displayed in nanoseconds in 'perf script'.
(Adrian Hunter)
- Fix potential infinite loop when handling Intel PT timestamps.
(Adrian Hunter)
- Slighly improve Intel PT debug logging. (Adrian Hunter)
- Warn when AUX data has been lost, just like when processing
PERF_RECORD_LOST. (Adrian Hunter)
- Further document export-to-postgresql.py script. (Adrian Hunter)
- Add option to synthesize branch stack from auxtrace data. (Adrian
Hunter)
Misc notable changes:
- Switch the default callchain output mode to 'graph,0.5,caller', to
make it look like the default for other tools, reducing the
learning curve for people used to 'caller' based viewing. (Arnaldo
Carvalho de Melo)
- various call chain usability enhancements. (Namhyung Kim)
- Introduce the 'P' event modifier, meaning 'max precision level,
please', i.e.:
$ perf record -e cycles:P usleep 1
Is now similar to:
$ perf record usleep 1
Useful, for instance, when specifying multiple events. (Jiri Olsa)
- Add 'socket' sort entry, to sort by the processor socket in 'perf
top' and 'perf report'. (Kan Liang)
- Introduce --socket-filter to 'perf report', for filtering by
processor socket. (Kan Liang)
- Add new "Zoom into Processor Socket" operation in the perf hists
browser, used in 'perf top' and 'perf report'. (Kan Liang)
- Allow probing on kmodules without DWARF. (Masami Hiramatsu)
- Fix 'perf probe -l' for probes added to kernel module functions.
(Masami Hiramatsu)
- Preparatory work for the 'perf stat record' feature that will allow
generating perf.data files with counting data in addition to the
sampling mode we have now (Jiri Olsa)
- Update libtraceevent KVM plugin. (Paolo Bonzini)
- ... plus lots of other enhancements that I failed to list properly,
by: Adrian Hunter, Alexander Shishkin, Andi Kleen, Andrzej Hajda,
Arnaldo Carvalho de Melo, Dima Kogan, Don Zickus, Geliang Tang, He
Kuang, Huaitong Han, Ingo Molnar, Jan Stancek, Jiri Olsa, Kan
Liang, Kirill Tkhai, Masami Hiramatsu, Matt Fleming, Namhyung Kim,
Paolo Bonzini, Peter Zijlstra, Rabin Vincent, Scott Wood, Stephane
Eranian, Sukadev Bhattiprolu, Taku Izumi, Vaishali Thakkar, Wang
Nan, Yang Shi and Yunlong Song"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (260 commits)
perf unwind: Pass symbol source to libunwind
tools build: Fix libiberty feature detection
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event
perf record: Add clang options for compiling BPF scripts
perf bpf: Attach eBPF filter to perf event
perf tools: Make sure fixdep is built before libbpf
perf script: Enable printing of branch stack
perf trace: Add cmd string table to decode sys_bpf first arg
perf bpf: Collect perf_evsel in BPF object files
perf tools: Load eBPF object into kernel
perf tools: Create probe points for BPF programs
perf tools: Enable passing bpf object file to --event
perf ebpf: Add the libbpf glue
perf tools: Make perf depend on libbpf
perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore
perf tools: Enable pre-event inherit setting by config terms
perf symbols: we can now read separate debug-info files based on a build ID
perf symbols: Fix type error when reading a build-id
perf tools: Search for more options when passing args to -h
perf stat: Cache aggregated map entries in extra cpumap
...
If we need to increase the number of huge pages, drop caches first
to reduce fragmentation and then check that we actually allocated
as many as we wanted. Retry once if that doesn't work.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
do_fork() is no longer defined on x86, so probe _do_fork() instead.
Fixes: 3033f14ab7 ("clone: support passing tls argument via C ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Instead of explicitly running the compiler, add dependencies and take
advantage of implicit rules to build only as necessary.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Several C programs fail to include the headers declaring all the
functions they call, resulting in warnings or errors.
After this, memfd_test.c is still missing some function declarations
but can't easily get them because of a conflict between
<linux/fcntl.h> and <sys/fcntl.h>.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Pull RCU changes from Ingo Molnar:
"The main changes in this cycle were:
- Improvements to expedited grace periods (Paul E McKenney)
- Performance improvements to and locktorture tests for percpu-rwsem
(Oleg Nesterov, Paul E McKenney)
- Torture-test changes (Paul E McKenney, Davidlohr Bueso)
- Documentation updates (Paul E McKenney)
- Miscellaneous fixes (Paul E McKenney, Boqun Feng, Oleg Nesterov,
Patrick Marlier)"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
fs/writeback, rcu: Don't use list_entry_rcu() for pointer offsetting in bdi_split_work_to_wbs()
rcu: Better hotplug handling for synchronize_sched_expedited()
rcu: Enable stall warnings for synchronize_rcu_expedited()
rcu: Add tasks to expedited stall-warning messages
rcu: Add online/offline info to expedited stall warning message
rcu: Consolidate expedited CPU selection
rcu: Prepare for consolidating expedited CPU selection
cpu: Remove try_get_online_cpus()
rcu: Stop excluding CPU hotplug in synchronize_sched_expedited()
rcu: Stop silencing lockdep false positive for expedited grace periods
rcu: Switch synchronize_sched_expedited() to IPI
locktorture: Fix module unwind when bad torture_type specified
torture: Forgive non-plural arguments
rcutorture: Fix unused-function warning for torturing_tasks()
rcutorture: Fix module unwind when bad torture_type specified
rcu_sync: Cleanup the CONFIG_PROVE_RCU checks
locking/percpu-rwsem: Clean up the lockdep annotations in percpu_down_read()
locking/percpu-rwsem: Fix the comments outdated by rcu_sync
locking/percpu-rwsem: Make use of the rcu_sync infrastructure
locking/percpu-rwsem: Make percpu_free_rwsem() after kzalloc() safe
...
Pull timer updates from Thomas Gleixner:
"The timer departement provides:
- More y2038 work in the area of ntp and pps.
- Optimization of posix cpu timers
- New time related selftests
- Some new clocksource drivers
- The usual pile of fixes, cleanups and improvements"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
timeconst: Update path in comment
timers/x86/hpet: Type adjustments
clocksource/drivers/armada-370-xp: Implement ARM delay timer
clocksource/drivers/tango_xtal: Add new timer for Tango SoCs
clocksource/drivers/imx: Allow timer irq affinity change
clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr()
clocksource/drivers/h8300_*: Remove unneeded memset()s
clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()
clocksource/drivers/em_sti: Remove unneeded memset()s
clocksource/drivers/mediatek: Use GPT as sched clock source
clockevents/drivers/mtk: Fix spurious interrupt leading to crash
posix_cpu_timer: Reduce unnecessary sighand lock contention
posix_cpu_timer: Convert cputimer->running to bool
posix_cpu_timer: Check thread timers only when there are active thread timers
posix_cpu_timer: Optimize fastpath_timer_check()
timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments
timers: Use __fls in apply_slack()
clocksource: Remove return statement from void functions
net: sfc: avoid using timespec
ntp/pps: use y2038 safe types in pps_event_time
...
CC libbpf.o
cc1: warnings being treated as errors
libbpf.c: In function 'bpf_program__title':
libbpf.c:1037: error: declaration of 'dup' shadows a global declaration
/usr/include/unistd.h:528: error: shadowed declaration is here
mv: cannot stat `./.libbpf.o.tmp': No such file or directory
make[3]: *** [libbpf.o] Error 1
make[2]: *** [libbpf-in.o] Error 2
make[1]: *** [/linux/tools/lib/bpf/libbpf.a] Error 2
make[1]: *** Waiting for unfinished jobs....
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1446549665-2342-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to [1], libbpf should be muted. This patch reset info and
warning message level to ensure libbpf doesn't output anything even
if error happened.
[1] http://lkml.kernel.org/r/20151020151255.GF5119@kernel.org
Committer note:
Before:
Testing it with an incompatible kernel version in the .c file that
generated foo.o:
[root@zoo ~]# perf record -e /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
[root@zoo ~]#
After:
[root@zoo ~]# perf record -e /tmp/foo.o sleep 1
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
[root@zoo ~]#
This, BTW, need fixing to emit a proper message by validating the
version in the foo.o "version" ELF section against the running kernel,
warning the user instead of asking the kernel to load a binary that it
will refuse due to unmatching kernel version.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446547486-229499-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to [1], 'perf test' should avoid output too much information
if '-v' is not set, only 'Ok', 'FAIL' or 'Skip' need to be printed.
This patch removes several messages sent directly to stderr to make
the output clean.
Before this patch:
# perf test dummy
23: Test using a dummy software event to keep tracking : (not supported) Ok
After this patch:
# perf test dummy
23: Test using a dummy software event to keep tracking : Skip
[1] http://lkml.kernel.org/r/20151020134155.GE4400@redhat.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446547486-229499-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling ioctl(..., RTC_UIE_ON, ...) without CONFIG_RTC_INTF_DEV_UIE_EMUL
either ends in rtc_update_irq_enable if rtc->uie_unsupported is true
or in __rtc_set_alarm in the if (!rtc->ops->set_alarm) branch. In both
cases the return value is -EINVAL. So check for that one instead of
ENOTTY.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Certain syscall emulation layers strictly check that the number of
arguments match what the syscall handler expects. The KILL_one_arg_one and
KILL_one_arg_six tests passed more parameters than expected to various
syscalls, causing failures in this emulation mode. Instead, test using
syscalls that take the appropriate number of arguments.
Signed-off-by: Robert Sesek <rsesek@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add a .notify callback to the acpi_nfit_driver that gets called on a
hotplug event. From this, evaluate the _FIT ACPI method which returns
the updated NFIT with handles for the hot-plugged NVDIMM.
Iterate over the new NFIT, and add any new tables found, and
register/enable the corresponding regions.
In the nfit test framework, after normal initialization, update the NFIT
with a new hot-plugged NVDIMM, and directly call into the driver to
update its view of the available regions.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Elliott, Robert <elliott@hpe.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: <linux-acpi@vger.kernel.org>
Cc: <linux-nvdimm@lists.01.org>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch tries to creates a common structure initialization
within the cpupower tool.
Previously the ``struct option`` was initialized
using `designated initializer` technique which was
not needed. There were conflicting initialization methods seen with
bench/main.c & others.
Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpupower idle-set -D <latency>
currently only disables all C-states that have a higher latency than the
specified <latency>. But if deep sleep states were already disabled and
have a lower latency, they should get enabled again.
For example:
This call:
cpupower idle-set -D 30
disables all C-states with a higher or equal latency than 30.
If one then calls:
cpupower idle-set -D 100
C-states with a latency between 30-99 will get enabled again with this patch
now. It is ensured that only C-states with a latency of 100 and higher are
disabled.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[root@hp-dl980g7-02 linux]# cpupower monitor
...
5472| 0| 1|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
10567| 0| 159|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
1661206560|859272560| 150|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
1661206560|943093104| 140|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
because of this cpupower also holds the incorrect value for the number
of physical packages in the machine
Changed cpupower to initialize the values of an offline cpu's socket and
core to -1, warn the user that one or more cpus is/are
offline and not print statistics for offline cpus.
This fix hides offlined cores where topology cannot be accessed.
With a recent kernel patch suggested from Prarit Bhargava it may be possible
that soft offlined cores' topology can still be parsed.
This patch would then show which cores in which package/socket are offline,
when sane toplogoy information is available.
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpica:
ACPICA: Update version to 20150930
ACPICA: Debugger: Fix dead lock issue ocurred in single stepping mode
ACPI: Enable build of AML interpreter debugger
ACPICA: Debugger: Add thread ID support so that single step mode can only apply to the debugger thread
ACPICA: Debugger: Fix "terminate" command by cleaning up subsystem shutdown logic
ACPICA: Debugger: Fix "quit/exit" command by cleaning up user commands termination logic
ACPICA: Linuxize: Export debugger files to Linux
ACPICA: iASL: General cleanup of the file suffix #defines
ACPICA: Improve typechecking, both compile-time and runtime
ACPICA: Update NFIT table to rename a flags field
ACPICA: Debugger: Update mutexes used for multithreaded debugger
ACPICA: Update exception code for "file not found" error
ACPICA: iASL: Add symbolic operator support for Index() operator
ACPICA: Remove unnecessary conditional compilation
Mere possession of vm86 state is strange. Make sure that nothing
gets corrupted if we fork after calling vm86().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Stas Sergeev <stsp@list.ru>
Link: http://lkml.kernel.org/r/08f83295460a80e41dc5e3e81ec40d6844d316f5.1446270067.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Even if --symfs is used to point to the debug binaries, we send in the
non-debug filenames to libunwind, which leads to libunwind not finding
the debug frame. Fix this by preferring the file in --symfs, if it is
available.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Any CFLAGS or LDFLAGS set by the user need to be passed to the feature
build command. This many include for example -I or -L to point to
libraries and include files in custom paths.
In most of the test-*.bin rules in build/feature/Makefile, we use the BUILD
macro which always sends in CFLAGS and LDFLAGS. The libiberty build line
however doesn't use the BUILD macro and thus needs to send in CFLAGS and
LDFLAGS explicitly. Without this, when using custom CFLAGS/LDFLAGS, libiberty
fails to be detected and the perf link fails with something like:
LINK perf
libbfd.a(bfd.o): In function `bfd_errmsg':
bfd.c:(.text+0x168): undefined reference to `xstrerror'
bbfd.a(opncls.o): In function `_bfd_new_bfd':
opncls.c:(.text+0xe8): undefined reference to `objalloc_create'
...
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-2-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch provides infrastructure for passing source files to --event
directly using:
# perf record --event bpf-file.c command
This patch does following works:
1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
expanded to allow caller tell it whether the passed file is source
file or object.
2) llvm__compile_bpf() is called to compile the '.c' file, the result
is saved into memory. Use bpf_object__open_buffer() to load the
in-memory object.
Introduces a bpf-script-example.c so we can manually test it:
# perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1
Note that '--clang-opt' must put before '--event'.
Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although previous patch allows setting BPF compiler related options in
perfconfig, on some ad-hoc situation it still requires passing options
through cmdline. This patch introduces 2 options to 'perf record' for
this propose: --clang-path and --clang-opt.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-9-git-send-email-wangnan0@huawei.com
[ Add the new options to the 'record' man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the final patch which makes basic BPF filter work. After
applying this patch, users are allowed to use BPF filter like:
# perf record --event ./hello_world.o ls
A bpf_fd field is appended to 'struct evsel', and setup during the
callback function add_bpf_event() for each 'probe_trace_event'.
PERF_EVENT_IOC_SET_BPF ioctl is used to attach eBPF program to a newly
created perf event. The file descriptor of the eBPF program is passed to
perf record using previous patches, and stored into evsel->bpf_fd.
It is possible that different perf event are created for one kprobe
events for different CPUs. In this case, when trying to call the ioctl,
EEXIST will be return. This patch doesn't treat it as an error.
Committer note:
The bpf proggie used so far:
__attribute__((section("fork=_do_fork"), used))
int fork(void *ctx)
{
return 0;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
failed to produce any samples, even with forks happening and it being
running in system wide mode.
That is because now the filter is being associated, and the code above
always returns zero, meaning that all forks will be probed but filtered
away ;-/
Change it to 'return 1;' instead and after that:
# trace --no-syscalls --event /tmp/foo.o
0.000 perf_bpf_probe:fork:(ffffffff8109be30))
2.333 perf_bpf_probe:fork:(ffffffff8109be30))
3.725 perf_bpf_probe:fork:(ffffffff8109be30))
4.550 perf_bpf_probe:fork:(ffffffff8109be30))
^C#
And it works with all tools, including 'perf trace'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While doing 'make -C tools/perf build-test':
LD fixdep-in.o
LINK fixdep
/bin/sh: /home/acme/git/linux/tools/build/fixdep: Permission denied
make[6]: *** [bpf.o] Error 1
make[5]: *** [libbpf-in.o] Error 2
make[4]: *** [/home/acme/git/linux/tools/lib/bpf/libbpf.a] Error 2
make[4]: *** Waiting for unfinished jobs....
The fixdep tool needs to be built as the first binary. Libraries are
built in paralel, so each of them needs to depend on fixdep target.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151028204450.GA25553@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch improves perf script by enabling printing of the
branch stack via the 'brstack' and 'brstacksym' arguments to
the field selection option -F. The option is off by default
and operates only if the perf.data file has branch stack content.
The branches are printed in to/from pairs. The most recent branch
is printed first. The number of branch entries vary based on the
underlying hardware and filtering used.
The brstack prints FROM/TO addresses in raw hexadecimal format.
The brstacksym prints FROM/TO addresses in symbolic form wherever
possible.
$ perf script -F ip,brstack
5d3000 0x401aa0/0x5d2000/M/-/-/-/0 ...
$ perf script -F ip,brstacksym
4011e0 noploop+0x0/noploop+0x0/P/-/-/0
The notation F/T/M/X/A/C describes the attributes of the branch.
F=from, T=to, M/P=misprediction/prediction, X=TSX, A=TSX abort, C=cycles (SKL)
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yuanfang Chen <cyfmxc@gmail.com>
Link: http://lkml.kernel.org/r/1441039273-16260-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.
Committer notes:
Testing it:
When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:
int _version __attribute__((section("version"), used)) = 0x40100;
For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:
# perf record --event /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.202 MB perf.data ]
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'bpf-loader.[ch]' files are introduced in this patch. Which will be
the interface between perf and libbpf. bpf__prepare_load() resides in
bpf-loader.c. Following patches will enrich these two files.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By adding libbpf into perf's Makefile, this patch enables perf to build
libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set.
The newly introduced code is similar to how libapi and libtraceevent
are wired into Makefile.perf.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Append make_no_libbpf to tools/perf/tests/make.
The 'bpf' feature check is appended into default FEATURE_TESTS and
FEATURE_DISPLAY, so perf will check the API version of bpf in
/path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except
when we are trying to port this code to an old kernel.
Error messages are also updated to notify users about the lack of BPF
support in 'perf record' if libelf is missing or the BPF API check
failed.
tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf
files when working on perf using tools/perf/tags.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com
[ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we split symbols based on the map comparison, but symbols are stored
within dso objects and maps could point into same dso objects (kernel maps).
Hence we could end up changing rbtree we are currently iterating and mess it
up. It's easily reproduced on s390x by running:
$ perf record -a -- sleep 3
$ perf buildid-list -i perf.data --with-hits
The fix is to compare dso objects instead.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151026135130.GA26003@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recent GDB (at least on a vanilla Debian box) looks for debug information in
/usr/lib/debug/.build-id/nn/nnnnnnn
where nn/nnnnnn is the build-id of the stripped ELF binary. This is
documented here:
https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
This was not working in perf because we didn't read the build id until
AFTER we searched for the separate debug information file. This patch
reads the build ID and THEN does the search.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This was benign, but wrong. The build-id should live in a char[], not a char*[]
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently 'perf <tool> -h' was made aware of arguments and would show
just the help for the arguments specified, but that required a strict
form, i.e.:
$ perf -h --tui
worked, but:
$ perf -h tui
didn't.
Make it support both cases and also look at the option help when neither
matches, so that he following examples works:
$ perf report -h interface
Usage: perf report [<options>]
--gtk Use the GTK2 interface
--stdio Use the stdio interface
--tui Use the TUI interface
$ perf report -h stack
Usage: perf report [<options>]
-g, --call-graph <print_type,threshold[,print_limit],order,
sort_key[,branch]>
Display call graph (stack chain/backtrace):
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: graph,0.5,caller,function
--max-stack <n> Set the maximum stack depth when parsing the
callchain, anything beyond the specified depth
will be ignored. Default: 127
$
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xzqvamzqv3cv0p6w3inhols3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently any time we need to access socket or core id for given cpu, we
access the sysfs topology file.
Adding a cpus_aggr_map cpu_map to cache those entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding cpu_map__empty_new interface to create empty cpumap with given
size. The cpumap entries are initialized with -1.
It'll be used for caching cpu_map in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because the 'perf stat record' patches will use the id_offset member
together with the priv pointer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445784728-21732-29-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now usage_with_options() setup a pager before printing message so normal
printf() or pr_err() will not be shown. The usage_with_options_msg()
can be used to print some help message before usage strings.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's annoying to see error or help message when command has many options
like in perf record, report or top. So setup pager when print parser
error or help message - it should be OK since no UI is enabled at the
parsing time. The usage_with_options() already disables it by calling
exit_browser() anyway.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can be more consistent with other --show-* options. The old
name (--showcpuutilization) is provided only for compatibility.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently if an option name is ambiguous it only prints first two
matched option names but no help. It'd be better it could show all
possible names and help messages too.
Before:
$ perf report --show
Error: Ambiguous option: show (could be --show-total-period or
--show-ref-call-graph)
Usage: perf report [<options>]
After:
$ perf report --show
Error: Ambiguous option: show (could be --show-total-period or
--show-ref-call-graph)
Usage: perf report [<options>]
-n, --show-nr-samples
Show a column with the number of samples
--showcpuutilization
Show sample percentage for different cpu modes
-I, --show-info Display extended information about perf.data file
--show-total-period
Show a column with the sum of periods
--show-ref-call-graph
Show callgraph from reference event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1445701767-12731-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some tools have a lot of options, so, providing a way to show help just
for some of them may come handy:
$ perf report -h --tui
Usage: perf report [<options>]
--tui Use the TUI interface
$ perf report -h --tui --showcpuutilization -b -c
Usage: perf report [<options>]
-b, --branch-stack use branch records for per branch histogram filling
-c, --comms <comm[,comm...]>
only consider symbols in these comms
--showcpuutilization
Show sample percentage for different cpu modes
--tui Use the TUI interface
$
Using it with perf bash completion is also handy, just make sure you
source the needed file:
$ . ~/git/linux/tools/perf/perf-completion.sh
Then press tab/tab after -- to see a list of options, put them after -h
and only the options chosen will have its help presented:
$ perf report -h --
--asm-raw --demangle-kernel --group
--kallsyms --pretty --stdio
--branch-history --disassembler-style --gtk
--max-stack --showcpuutilization --symbol-filter
--branch-stack --dsos --header
--mem-mode --show-info --symbols
--call-graph --dump-raw-trace --header-only
--modules --show-nr-samples --symfs
--children --exclude-other --hide-unresolved
--objdump --show-ref-call-graph --threads
--column-widths --fields --ignore-callees
--parent --show-total-period --tid
--comms --field-separator --input
--percentage --socket-filter --tui
--cpu --force --inverted
--percent-limit --sort --verbose
--demangle --full-source-path --itrace
--pid --source --vmlinux
$ perf report -h --socket-filter
Usage: perf report [<options>]
--socket-filter <n>
only show processor socket that match with this filter
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-83mcdd3wj0379jcgea8w0fxa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When asking for a listing of the options, be it using -h or when an
unknown option is passed, order it by one-letter options, then the ones
having just long names.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-41qh68t35n4ehrpsuazp1dx8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This pull request is large with a total of 136 non-merge
commits. Because of its size, we will only describe the big things in
broad terms.
Many will be happy to know that dwc3 is now almost twice as fast after
some profiling and speed improvements. Also in dwc3, John Youn from
Synopsys added support for their new DWC USB3.1 IP Core and the HAPS
platform which can be used to validate it.
A series of patches from Robert Baldyga cleaned up uses of
ep->driver_data as a flag for "claimed endpoint" in favor of the new
ep->claimed flag.
Sudip Mukherjee fixed a ton of really old problems on the amd5536udc
driver. That should make a few people happy.
Heikki Krogerus worked on converting dwc3 to the unified device property
interface.
Together with these, there's a ton of non-critical fixes, typos and
stuff like that.
Signed-off-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jPoY
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: patches for v4.4 merge window
This pull request is large with a total of 136 non-merge
commits. Because of its size, we will only describe the big things in
broad terms.
Many will be happy to know that dwc3 is now almost twice as fast after
some profiling and speed improvements. Also in dwc3, John Youn from
Synopsys added support for their new DWC USB3.1 IP Core and the HAPS
platform which can be used to validate it.
A series of patches from Robert Baldyga cleaned up uses of
ep->driver_data as a flag for "claimed endpoint" in favor of the new
ep->claimed flag.
Sudip Mukherjee fixed a ton of really old problems on the amd5536udc
driver. That should make a few people happy.
Heikki Krogerus worked on converting dwc3 to the unified device property
interface.
Together with these, there's a ton of non-critical fixes, typos and
stuff like that.
Signed-off-by: Felipe Balbi <balbi@ti.com>
The perf_config() infrastructure we inherited from git calls die() when
the provided config callback returns -1, meaning some key in a config
section is unexpected, that seems ok for a stdio based tool, but in
--tui we end up messing up the output, so just tell the user about the
error, wait for a keystroke and return 0, being more resilient and
proceeding with what we managed to parse.
That die() needs to die, tho :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pqtsffh2kwr5mwm4qg9kgotu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. we want to tell the user about errors found during, for instance,
the ui_browser initialization, so that a call to ui__warning() appears
as a window waiting for a key to be pressed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ederrwizcl6mfz10vfobl5qq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate__configs should be sorted so that it can use bsearch(3).
However commit 0c4a5bcea4 ("perf annotate: Display total number of
samples with --show-total-period") added a new config item at the end.
This resulted in the 'annotate.use_offset' config variable cannot be
found and perf terminated like below:
$ perf report
bad config file line 6 in ~/.perfconfig
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1445396240-3428-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --call-graph option is complex so we should provide better guide for
users. Also change help message to be consistent with config option
names. Now perf top will show help like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph <record_mode[,record_size],print_type,threshold[,print_limit],order,sort_key[,branch]>
setup and enables call-graph (stack chain/backtrace):
record_mode: call graph recording mode (fp|dwarf|lbr)
record_size: if record_mode is 'dwarf', max size of stack recording (<bytes>)
default: 8192 (bytes)
print_type: call graph printing style (graph|flat|fractal|none)
threshold: minimum call graph inclusion threshold (<percent>)
print_limit: maximum number of call graph entry (<number>)
order: call graph order (caller|callee)
sort_key: call graph sort key (function|address)
branch: include last branch info to call graph (branch)
Default: fp,graph,0.5,caller,function
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445524112-5201-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The caller callchain order is useful with --children option since it can
show 'overview' style output, but other commands which don't use
--children feature like 'perf script' or even 'perf report/top' without
--children are better to keep callee order.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445499946-29817-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf top --call-graph' option is same as 'perf record'. But
'perf top' also need to receive display options in 'perf report'. To do
that, change parse_callchain_report_opt() to allow record options too.
Now perf top can receive display options like below:
$ perf top --call-graph
Error: option `call-graph' requires a value
Usage: perf top [<options>]
--call-graph
<mode[,dump_size],output_type,min_percent[,print_limit],call_order[,branch]>
setup and enables call-graph (stack chain/backtrace)
recording: fp dwarf lbr, output_type (graph, flat,
fractal, or none), min percent threshold, optional
print limit, callchain order, key (function or
address), add branches
$ perf top --call-graph callee,graph,fp
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These messages will be used by 'perf top' in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445495330-25416-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commits such as 65dd297ac2 ("xfs: %pF is only for function
pointers") caused a regression because pretty_print() didn't support
%ps/%pS. The current %pf/%pF implementation in pretty_print() is what
%ps/%pS is supposed to do, so use the same code for %ps/%pS.
Addressing the incorrect %pf/%pF implementation is beyond the scope of
this patch.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Chinner <david@fromorbit.com>
Link: http://lkml.kernel.org/r/20150831211637.GA12848@home.buserror.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=6 lock=0)
should print all 7 bits of MAX_NON_TURBO_RATIO (in decimal):
MSR_TURBO_ACTIVATION_RATIO: 0x00000016 (MAX_NON_TURBO_RATIO=22 lock=0)
Signed-off-by: Len Brown <len.brown@intel.com>
ACPICA commit bed456ed2976bdaafdef406b982fdf6c539befc0
Removed some extraneous defines, reordered others.
Link: https://github.com/acpica/acpica/commit/bed456ed
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a missing field to the perf_event_attr debug output.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1445366797-30894-4-git-send-email-andi@firstfloor.org
[ Print it between config2 and sample_regs_user (peterz)]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf will core dump if --per-socket/core -a are applied for perf stat.
The root cause is that cpu_map__build_map set refcnt of evlist's cpu_map
to 1. It should set refcnt for the newly created cpu_map, not evlist's
cpu_map.
Here is the example:
# perf stat -e cycles --per-socket -a sleep 1
Performance counter stats for 'system wide':
S0 36 30,196,257 cycles
S1 28 15,823,536 cycles
1.001126828 seconds time elapsed
*** Error in `./perf': corrupted double-linked list: 0x00000000021f9090 ***
======= Backtrace: =========
/lib64/libc.so.6[0x3002e7bbe7]
/lib64/libc.so.6[0x3002e7d2b5]
./perf(perf_evsel__delete+0x28)[0x485bdd]
./perf[0x4800e8]
./perf(perf_evlist__delete+0x5e)[0x482cd5]
./perf(cmd_stat+0xf25)[0x432328]
./perf[0x4768e0]
./perf[0x476ad6]
./perf[0x476b41]
./perf(main+0x1d0)[0x476db2]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3002e21b45]
./perf[0x4202c5]
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1444388363-35936-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The format of the role word has changed through the years and the plugin
was never updated; some VMX exit reasons were missing too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1443695293-31127-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7c422f5572 ("tools build: Build
fixdep helper from perf and basic libs") dynamically creates fixdep
during the perf building. Add it to .gitignore.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7c422f5572 ("tools build: Build fixdep helper from perf and basic libs")
Link: http://lkml.kernel.org/r/1444899116-8220-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Conflicts:
drivers/net/usb/asix_common.c
net/ipv4/inet_connection_sock.c
net/switchdev/switchdev.c
In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.
The other two conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add a new branch type sampling filter to perf record.
It is named 'call' and maps to PERF_SAMPLE_BRANCH_CALL. It samples
direct call branches only, unlike 'any_call' which includes indirect
calls as well.
$ perf record -j call -e cycles .....
The man page is updated accordingly.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: khandual@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1444720151-10275-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bzy_MHz = TSC_delta*tsc_tweak/APERF_delta/MPERF_delta/measurement_interval
becomes
Bzy_MHz = base_mhz/APERF_delta/MPERF_delta
on systems which support MSR_NHM_PLATFORM_INFO.
base_mhz is calculated directly from the base_ratio
reported in MSR_NHM_PLATFORM_INFO * bclk,
and bclk is discovered via MSR or cpuid.
This reduces the dependency of Bzy_MHz calculation on the TSC.
Previously, there were 4 TSC readings required in each caculation,
the raw TSC delta combined with the measurement_interval.
This also removes the "tsc_tweak" correction factor used when
TSC runs on a different base clock from the CPU's bclk.
After this change, tsc_tweak is used only for %Busy.
The end-result should be a Bzy_MHz result slightly less prone to jitter.
Signed-off-by: Len Brown <len.brown@intel.com>
There's no need to check sampling output fields for events without
perf_event_attr::sample_type field set.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444992092-17897-51-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding data arg to cpu_map__build_map callback, so we could pass data
along to the callback. It'll be needed in following patches to retrieve
topology info from perf.data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444992092-17897-41-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll need to call it from perf stat in the stat_script patchkit
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444992092-17897-40-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding AGGR_UNSET mode, so we could distinguish unset aggr_mode in
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444992092-17897-30-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's used as the perf_evsel::priv data, so the name suits better. Also
we'll need the perf_stat name free for more generic struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444992092-17897-29-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Capitalize 'usage' to make it consistent with all the other 'Usage' in
the codes, e.g., usage_builtin.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Sriram Raghunathan <sriram.r@nokia.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1444894792-2338-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So right now we output this text:
memcpy: Benchmark for memcpy() functions
memset: Benchmark for memset() functions
all: Test all memory access benchmarks
But the right verb to use with benchmarks is to 'run' them, not 'test'
them.
So change this (and all similar texts) to:
memcpy: Benchmark for memcpy() functions
memset: Benchmark for memset() functions
all: Run all memory access benchmarks
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-15-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So right now there's a somewhat inconsistent mess of the benchmarking
code and options sometimes calling benchmarked functions 'functions',
sometimes calling them 'routines'.
Name them 'functions' consistently.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-14-git-send-email-mingo@kernel.org
[ Updated perf-bench man page, pointed out by David Ahern ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have three benchmarking subsystems that specify some sort of 'number
of loops' parameter - but all of them do it inconsistently:
numa: -l/--nr_loops
sched messaging: -l/--loops
mem memset/memcpy: -i/--iterations
Harmonize them to -l/--nr_loops by picking the numa variant - which is
also the most likely one to have existing scripting which we don't want
to break.
Plus improve the parameter help texts to indicate the default value for
the nr_loops variable to keep users from guessing ...
Also propagate the naming to internal variables.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-13-git-send-email-mingo@kernel.org
[ Let the harmonisation reach the perf-bench man page as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reorder functions a bit, so that we synchronize the layout of the
memcpy() and memset() portions of the code.
This improves the code, especially after we'll add an strlcpy() variant
as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-12-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- fix various typos in user visible output strings
- make the output consistent (wrt. capitalization and spelling)
- offer the list of routines to benchmark on '-r help'.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-11-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So 'perf bench mem memcpy/memset' consistently uses 'len' and 'length'
for buffer sizes - while it's really a memory buffer size. (strings have
length.)
Rename all affected variables.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-10-git-send-email-mingo@kernel.org
[ Update perf-bench man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So bench/mem-functions.c has a 'routine' name for the routines parameter
string, but a 'length_str' name for the length parameter string.
We also have another entity named 'routine': 'struct routine'.
This is inconsistent and confusing: rename 'routine' to 'routine_str'.
Also fix typos in the --routine help text.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-9-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So 'perf bench mem memset/memcpy' has a CPU cycles measurement method,
but calls it 'cycle' (singular) throughout the code, which makes it
harder to read.
Rename all related functions, variables and options to a plural 'cycles'
nomenclature.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-8-git-send-email-mingo@kernel.org
[ s/--cycle/--cycles/g in perf-bench man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So 'perf bench -h' is not very helpful when printing the help line
about the output formatting options:
-f, --format <default>
Specify format style
There are two output format styles, 'default' and 'simple', so improve
the help text to:
-f, --format <default|simple>
Specify the output formatting style
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-7-git-send-email-mingo@kernel.org
[ Removed leftovers from the mem-functions.c rename ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So 'perf bench mem memcpy/memset' has elaborate code to measure
memcpy()/memset() performance both with freshly allocated buffers (which
includes initial page fault overhead) and with preallocated buffers.
But the thing is, the resulting bandwidth results are mostly
meaningless, because page faults dominate so much of the cost.
It might make sense to measure cache cold vs. cache hot performance, but
the code does not do this.
So remove this complication, and always prefault the ranges before using
them.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-6-git-send-email-mingo@kernel.org
[ Remove --no-prefault, --only-prefault from docs, noticed by David Ahern ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So mem-memcpy.c started out as a simple memcpy() benchmark, then it grew
memset() functionality and now I plan to add string copy benchmarks as
well.
This makes the file name a misnomer: rename it to the more generic
mem-functions.c name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445241870-24854-5-git-send-email-mingo@kernel.org
[ The "rename" was introducing __unused, wasn't removing the old file,
and didn't update tools/perf/bench/Build, fix it ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently libtraceevent emits warning on unsupported event formats.
However it'd be better to see them only -v option is given. To do that,
it needs to override the warning() function which is used in the
libtracevent. Thus add set_warning_routine() same as set_die_routine()
and check the verbose flag in our warning routine.
Before:
# perf test 5
5: parse events tests :
Warning: [kvmmmu:kvm_mmu_get_page] bad op token {
Warning: [kvmmmu:kvm_mmu_sync_page] bad op token {
Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token {
Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token {
Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined
...
Ok
After:
# perf test 5
5: parse events tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445268229-1601-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, when 'perf test' is run by a normal user, it'll fail to
access tracepoint events. The output becomes somewhat messy because it
tries to be nice with long error messages and hints.
IMHO this is not needed for 'perf test' by default and AFAIK 'perf test'
uses pr_debug() rather than pr_err() for such messages so that one can
use -v option to see further details on failed testcases if needed.
Before:
$ perf test
1: vmlinux symtab matches kallsyms : FAILED!
2: detect openat syscall event :Error:
No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
FAILED!
3: detect openat syscall event on all cpus :Error:
No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
FAILED!
...
After:
$ perf test
1: vmlinux symtab matches kallsyms : FAILED!
2: detect openat syscall event : FAILED!
3: detect openat syscall event on all cpus : FAILED!
...
$ perf test -v 2
2: detect openat syscall event :
--- start ---
test child forked, pid 30575
Error: No permissions to read
/sys/kernel/debug/tracing/events/syscalls/sys_enter_openat
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
test child finished with -1
---- end ----
detect openat syscall event: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1445268229-1601-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
EBB (Event Based Branches) are currently only available on POWER8, so we
should skip them on other CPUs.
I've found that at least one test loops forever on 970MP (cycles_with_freeze_test).
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
[mpe: Minor change log editing, add skip to cpu_event_vs_ebb_test]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU updates from Paul E. McKenney:
- Miscellaneous fixes. (Paul E. McKenney, Boqun Feng, Oleg Nesterov, Patrick Marlier)
- Improvements to expedited grace periods. (Paul E. McKenney)
- Performance improvements to and locktorture tests for percpu-rwsem.
(Oleg Nesterov, Paul E. McKenney)
- Torture-test changes. (Paul E. McKenney, Davidlohr Bueso)
- Documentation updates. (Paul E. McKenney)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Re-enable CONFIG_SCSI_DH in our defconfigs
- Remove unused os_area_db_id_video_mode
- cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew
- cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew
- cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew
- cxl: Workaround malformed pcie packets on some cards from Philippe
- cxl: Fix number of allocated pages in SPA from Christophe Lombard
- Fix checkstop in native_hpte_clear() with lockdep from Cyril
- Panic on unhandled Machine Check on powernv from Daniel
- selftests/powerpc: Fix build failure of load_unaligned_zeropad test
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3ze+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Re-enable CONFIG_SCSI_DH in our defconfigs
- Remove unused os_area_db_id_video_mode
- cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew
- cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew
- cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew
- cxl: Workaround malformed pcie packets on some cards from Philippe
- cxl: Fix number of allocated pages in SPA from Christophe Lombard
- Fix checkstop in native_hpte_clear() with lockdep from Cyril
- Panic on unhandled Machine Check on powernv from Daniel
- selftests/powerpc: Fix build failure of load_unaligned_zeropad test
* tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure of load_unaligned_zeropad test
powerpc/powernv: Panic on unhandled Machine Check
powerpc: Fix checkstop in native_hpte_clear() with lockdep
cxl: Fix number of allocated pages in SPA
cxl: Workaround malformed pcie packets on some cards
cxl: fix leak of ctx->mapping when releasing kernel API contexts
cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API
cxl: fix leak of IRQ names in cxl_free_afu_irqs()
powerpc/ps3: Remove unused os_area_db_id_video_mode
powerpc/configs: Re-enable CONFIG_SCSI_DH
Changing arm64 syscalls is done via a specific register set, more like s390
than like arm (specific ptrace call) and x86 (part of general registers).
Since (restarting) poll doesn't exist on arm64, switch to using nanosleep
for testing restart_syscall. And since it looks like the syscall ABI is
inconsistent on arm-compat, so we must work around it (and document it) in
the test.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
There is a mandate of 16-byte aligned stack on AArch64 [1], so the
STACK_SIZE here should also be 16-byte aligned, otherwise we would
get an error when calling clone().
[1] http://lxr.free-electrons.com/source/arch/arm64/kernel/process.c#L265
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
To test pstore in earnest, we have to cause kernel crash and check
pstore filesystem after reboot.
We add two scripts:
- pstore_crash_test
This script causes kernel crash and reboot. It is executed by
'make run_pstore_crash' in selftests. It can also be used with kdump.
- pstore_post_reboot_tests
This script includes test cases which check pstore's behavior after
crash and reboot. It is executed together with pstore_tests by
'make run_tests [-C pstore]' in selftests.
The test cases in pstore_post_reboot_tests are currently following.
- Check pstore backend is registered
- Mount pstore filesystem
- Check dmesg/console/pmsg files exist in pstore filesystem
- Check dmesg/console files contain oops end marker
- Check pmsg file properly keeps the content written before crash
- Remove all files in pstore filesystem
Example usage is following.
(before reboot)
# cd /path/to/selftests
# make run_tests -C pstore
=== Pstore unit tests (pstore_tests) ===
UUID=b49b02cf-b0c2-4309-be43-b08c3971e37f
...
selftests: pstore_tests [PASS]
=== Pstore unit tests (pstore_post_reboot_tests) ===
UUID=953eb1bc-8e03-48d7-b27a-6552b24c5b7e
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000
pstore_crash_test has not been executed yet. we skip further tests.
selftests: pstore_post_reboot_tests [PASS]
# make run_pstore_crash
=== Pstore unit tests (pstore_crash_test) ===
UUID=93c8972d-1466-430b-8c4a-28d8681e74c6
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000
Causing kernel crash ...
(kernel crash and reboot)
...
(after reboot)
# make run_tests -C pstore
=== Pstore unit tests (pstore_tests) ===
UUID=8e511e77-2285-499f-8bc0-900d9af1fbcc
...
selftests: pstore_tests [PASS]
=== Pstore unit tests (pstore_post_reboot_tests) ===
UUID=2dcc2132-4f3c-45aa-a38f-3b54bff8cef1
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000
Mounting pstore filesystem ... ok
Checking dmesg files exist in pstore filesystem ... ok
dmesg-ramoops-0
dmesg-ramoops-1
Checking console files exist in pstore filesystem ... ok
console-ramoops-0
Checking pmsg files exist in pstore filesystem ... ok
pmsg-ramoops-0
Checking dmesg files contain oops end marker
dmesg-ramoops-0 ... ok
dmesg-ramoops-1 ... ok
Checking console file contains oops end marker ... ok
Checking pmsg file properly keeps the content written before crash ... ok
Removing all files in pstore filesystem
console-ramoops-0 ... ok
dmesg-ramoops-0 ... ok
dmesg-ramoops-1 ... ok
pmsg-ramoops-0 ... ok
selftests: pstore_post_reboot_tests [PASS]
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Seiji Aguchi <seiji.aguchi.tr@hitachi.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The pstore_tests script includes test cases which check pstore's
behavior before crash (and reboot).
The test cases are currently following.
- Check pstore backend is registered
- Check pstore console is registered
- Check /dev/pmsg0 exists
- Write unique string to /dev/pmsg0
The unique string written to /dev/pmsg includes UUID. The UUID is also
left in 'uuid' file in order to enable us to check if the pmsg keeps the
string correctly after reboot.
Example usage is following.
# cd /path/to/selftests
# make run_tests -C pstore (or just .pstore/pstore_tests)
make: Entering directory '/path/to/selftests/pstore'
=== Pstore unit tests (pstore_tests) ===
UUID=b49b02cf-b0c2-4309-be43-b08c3971e37f
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000
Checking pstore console is registered ... ok
Checking /dev/pmsg0 exists ... ok
Writing unique string to /dev/pmsg0 ... ok
selftests: pstore_tests [PASS]
make: Leaving directory '/path/to/selftests/pstore'
We can also see test logs later.
# cat pstore/logs/20151001-072718_b49b02cf-b0c2-4309-be43-b08c3971e37f/pstore_tests.log
Thu Oct 1 07:27:18 UTC 2015
=== Pstore unit tests (pstore_tests) ===
UUID=b49b02cf-b0c2-4309-be43-b08c3971e37f
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait mem=768M ramoops.mem_address=0x30000000 ramoops.mem_size=0x10000
Checking pstore console is registered ... ok
Checking /dev/pmsg0 exists ... ok
Writing unique string to /dev/pmsg0 ... ok
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Seiji Aguchi <seiji.aguchi.tr@hitachi.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When building against older kernel headers, currently the tm-syscall
test fails to build because PPC_FEATURE2_HTM_NOSC is not defined.
Tweak the test so that if PPC_FEATURE2_HTM_NOSC is not defined it still
builds, but prints a warning at run time and marks the test as skipped.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This list has gotten too long. Split it into individual lines and sort
them, so in future we can add new entries more cleanly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Checkpatch is really quite bad for user code like this, but it
caught two legit style issues.
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3335040bdd40d2bca4b1a28a3f8b165361c801b7.1444696194.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
He Kuang the new fixdep tool breaks cross compiling. The reason is it
wouldn't get compiled under host arch, but under cross arch and failed
to run.
We need to add support for host side tools build, meanwhile disabling
fixdep usage for cross arch builds.
Reported-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151013124358.GB9467@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vinson reported build breakage with gcc 4.4 due to strict-aliasing.
CC util/annotate.o
cc1: warnings being treated as errors
util/annotate.c: In function ‘disasm__purge’:
linux-next/tools/include/linux/compiler.h:66: error: dereferencing
pointer ‘res.41’ does break strict-aliasing rules
The reason is READ_ONCE/WRITE_ONCE code we took from kernel sources. They
intentionaly break aliasing rules. While this is ok for kernel because it's
built with -fno-strict-aliasing, it breaks perf which is build with
-Wstrict-aliasing=3.
Using extra __may_alias__ type to allow aliasing in this case.
Reported-and-tested-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Martin Liska <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Cc: linux-next@vger.kernel.org
Link: http://lkml.kernel.org/r/20151013085214.GB2705@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7a5692e6e5 ("arch/powerpc: provide zero_bytemask() for
big-endian") added a call to __fls() in our word-at-a-time.h. That was
fine for the kernel build but missed the fact that we also use
word-at-a-time.h in a userspace test.
Pulling in the kernel version of __fls() gets messy, so just define our
own, it's unlikely to change often.
Fixes: 7a5692e6e5 ("arch/powerpc: provide zero_bytemask() for big-endian")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With horizontal scrolling, the left/right arrow keys are used to scroll
columns and ENTER/ESC keys are used to enter/exit menu. However if
callchain is recorded, the ENTER key is used to toggle callchain
expansion so there's no way to display menu. Use 'm' key to display the
menu for this case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444694521-8136-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
unw_word_t is uint64_t even on 32-bit MIPS. Cast it to uintptr_t before
the cast to void *p to get rid of the following errors:
util/unwind-libunwind.c: In function 'access_mem':
util/unwind-libunwind.c:464:4: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
util/unwind-libunwind.c:475:2: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
cc1: all warnings being treated as errors
make[3]: *** [util/unwind-libunwind.o] Error 1
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1443379079-29133-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When NO_LIBUNWIND_DEBUG_FRAME=0, use the .debug_frame if the .eh_frame
doesn't contain the approprate unwind tables.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1443379079-29133-3-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When in the hists browser, i.e. in 'perf report' or in 'perf top', it is
possible to press '/' and specify a substring to filter by symbol name.
Clarify how to remove a filter by making the prompt be:
Please enter the name of symbol you want to see.
To remove the filter later, press / + ENTER
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vbq2b0kyufwy6p0ctkfswcoe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They were repurposed for horizontal scrolling, so use just ENTER/ESC in
the help messages.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c6c3c02dea ("perf hists browser: Implement horizontal scrolling")
Link: http://lkml.kernel.org/n/tip-n5ar4qg8fs12ax4vhr3rxhxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not as the first attempt at finding a vmlinux for the running kernel,
this way we get a more informative filename to present in tools, it will
check that the build-id is the same as the one previously loaded in the
DSO in dso->build_id, reading from /sys/kernel/notes, for instance.
E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc
kernel function, in the first line:
Before:
scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
After:
scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux
And:
# ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
# file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
/root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
#
The same as:
# file /lib/modules/4.3.0-rc1+/build/vmlinux
/lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
Furthermore:
# sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux
# sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
[root@zoo new]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently a kernel side NTP bug was fixed via the following commit:
2619d7e9c9 ("time: Fix timekeeping_freqadjust()'s incorrect use of abs() instead of abs64()")
When the bug was reported it was difficult to detect, except by
tweaking the adjtimex tick value, and noticing how quickly the
adjustment took:
https://lkml.org/lkml/2015/9/1/488
Thus this patch introduces a new test which manipulates the
adjtimex tick value and validates that the results are what we
expect.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Nuno Gonçalves <nunojpg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1444094217-20258-1-git-send-email-john.stultz@linaro.org
[ Tidied up the code and the changelog a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The header <panel.h> might be in /usr/include/ncursesw, which is not
part of the standard include path. This fixes compile on openSUSE.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
User visible:
- Adding a field via 'perf report -F' that already is enabled makes
the tool get stuck in a loop, fix it (Jiri Olsa)
Infrastructure:
- Support PERF_RECORD_SWITCH in the python binding (Arnaldo Carvalho de Melo)
- Fix handling read() result using a signed variable, found with Coccinelle
(Andrzej Hajda)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Iv+A
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Adding a field via 'perf report -F' that already is enabled makes
the tool get stuck in a loop, fix it. (Jiri Olsa)
Infrastructure changes:
- Support PERF_RECORD_SWITCH in the python binding. (Arnaldo Carvalho de Melo)
- Fix handling read() result using a signed variable, found with Coccinelle.
(Andrzej Hajda)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix build break on (at least) powerpc due to sample_reg_masks, not being
available for linking (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Dr5G
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
- Fix build break on (at least) powerpc due to sample_reg_masks, not being
available for linking. (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_regs.c does not get built on Powerpc as CONFIG_PERF_REGS is false.
So the weak definition for 'sample_regs_masks' doesn't get picked up.
Adding perf_regs.o to util/Build unconditionally, exposes a redefinition
error for 'perf_reg_value()' function (due to the static inline version
in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that
function.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This tests assumptions about how fast syscall works wrt pt_regs
and, in particular, what happens if IP is decremented by 2
during a syscall.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1c44dbfe59000ba135bbf35ccc5d2433a0b31618.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While the kernel itself doesn't use DWARF unwinding, user code
expects to be able to unwind the vDSO. The vsyscall
(AT_SYSINFO) entry is manually CFI-annotated, and this tests
that it unwinds correctly.
I tested the test by incorrectly annotating __kernel_vsyscall,
and the test indeed fails if I do that.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/8bf736d1925cdd165c0f980156a4248e55af47a1.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The function can return negative value, assigning it to unsigned
variable can cause memory corruption.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/1444122017-16856-1-git-send-email-a.hajda@samsung.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_hpp__init currently does not respect sorting dimensions and the
setup_sorting function could endup queueing same format twice. That
screwed up the perf_hpp__list and got stuck in loop within
perf_hpp__setup_output_field function.
$ perf report -F +overhead
0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
1506 {
#0 0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
#1 0x00000000004c139d in perf_hpp__same_sort_entry (a=a@entry=0x880440 <perf_hpp.format>, b=b@entry=0x2bb2fe0) at util/sort.c:1380
#2 0x00000000004f8d3c in perf_hpp__setup_output_field () at ui/hist.c:554
#3 0x00000000004c1d1e in setup_sorting () at util/sort.c:1984
#4 0x000000000042efbf in cmd_report (argc=0, argv=0x7ffea5a0e790, prefix=<optimized out>) at builtin-report.c:874
#5 0x0000000000476f13 in run_builtin (p=p@entry=0x875628 <commands+168>, argc=argc@entry=3, argv=argv@entry=0x7ffea5a0e790) at perf.c:385
#6 0x000000000047710b in handle_internal_command (argc=3, argv=0x7ffea5a0e790) at perf.c:445
#7 0x0000000000477176 in run_argv (argcp=argcp@entry=0x7ffea5a0e5fc, argv=argv@entry=0x7ffea5a0e5f0) at perf.c:489
#8 0x00000000004773e7 in main (argc=3, argv=0x7ffea5a0e790) at perf.c:606
Using hpp_dimension__add_output function to register the output column.
It will also mark the dimension as taken and omit above stuck.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will allow to register output column from ui code and
respect taken sort/output dimensions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call reset_dimensions within __setup_output_field
function. It's already called in its caller setup_sorting right before
perf_hpp__init, which will be changed in following patch to respect
taken dimension.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit allows --bootarg instead of --bootargs, --config instead of
--configs, and --qemu-arg instead of --qemu-args. For those cases where
a native English speaker might auto-correct the argument to be incorrect.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds percpu_rwsem tests based on the earlier rwsem tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Real time mutexes is one of the few general primitives
that we do not have in locktorture. Address this -- a few
considerations:
o To spice things up, enable competing thread(s) to become
rt, such that we can stress different prio boosting paths
in the rtmutex code. Introduce a ->task_boost callback,
only used by rtmutex-torturer. Tasks will boost/deboost
around every 50k (arbitrarily) lock/unlock operations.
o Hold times are similar to what we have for other locks:
only occasionally having longer hold times (per ~200k ops).
So we roughly do two full rt boost+deboosting ops with
short hold times.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently we dont fail properly when pattern matching fails to find any
tracepoint.
Current behaviour:
$ perf record -e 'sched:krava*' sleep 1
WARNING: event parser found nothinginvalid or unsupported event: 'sched:krava*'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
This patch change:
$ perf record -e 'sched:krava*' sleep 1
event syntax error: 'sched:krava*'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/krava* not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444073477-3181-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do it using the recently introduced ui_brower scrolling mode, setting
ui_browser.columns to the number of sort columns and then, when
rendering each line, skipping as many initial columns as the user
pressed the right arrow.
As the user presses the left arrow, the ui_browser code will remove the
scrolling counter and the left scrolling takes place.
The right arrow key was an alias for ENTER, so people used to press it
may get a bit annoyed at first, sorry! Ditto for ESC and the left key.
Callchains can be left as is or we can, when rendering the Symbol
column, store the at what position on the screen it is and then
using ui_browser__gotorc() to print it from there, i.e. the callchain
would move around with the symbol.
Leaving it as is, i.e. at a fixed position, close to the left, saves
precious screen real state for it, so I'm inclined to leave it as is
now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ccqq9sabgfge5dwbqjwh71ij@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the classes derived from ui_browser want to do some sort of
horizontal scrolling, they have just to set ui_browser->columns to
the number of columns available.
Those columns can be the number of characters on the screen, if what is
desired is to scroll character by character, or the number of columns in
a spreadsheet like table.
This is what the hist_browser will do, skipping ui_browser->horiz_scroll
columns when rendering each of its lines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q6a22bpmpgcr1awgzrmd4jrs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Which is the most common default found in other similar tools.
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://www.youtube.com/watch?v=nXaxk27zwlk
Link: http://lkml.kernel.org/n/tip-v8lq36aispvdwgxdmt9p9jd9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter reports that it's possible to trigger a WARN_ON_ONCE() in the
Intel CQM code by combining a hardware event and an Intel CQM
(software) event into a group. Unfortunately, the perf tools are not
able to create this bundle and we need to manually construct a test
case.
For posterity, record Peter's proof of concept test case in tools/perf
so that it presents a model for how we can perform architecture
specific tests, or "arch tests", in perf in the future.
The particular issue triggered in the test case is that when the
counter for the hardware event overflows and triggers a PMI we'll read
both the hardware event and the software event counters.
Unfortunately, for CQM that involves performing an IPI to read the CQM
event counters on all sockets, which in NMI context triggers the
WARN_ON_ONCE().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.uk
Link: http://lkml.kernel.org/n/tip-3p4ra0u8vzm7m289a1m799kf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move out the x86-specific tests into tools/perf/arch/x86/tests and
define an 'arch_tests' array, which is the list of tests that only apply
to the build architecture.
We can also now begin to get rid of some of the #ifdef code that is
present in the generic perf tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-9s68h4ptg06ah0lgnjz55mqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tests that only make sense for some architectures currently live in
the same place as the generic tests. Move out the x86-specific tests
into tools/perf/arch/x86/tests and define an 'arch_tests' array, which
is the list of tests that only apply to the build architecture.
The main idea is to encourage developers to add arch tests to build
out perf's test coverage, without dumping everything in
tools/perf/tests.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/n/tip-p4uc1c15ssbj8xj7ku5slpa6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding handling for '-h' and '-v' options to invoke help and version
command respectively.
Current behaviour is:
$ perf -v
Unknown option: -v
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
$ perf -h
Unknown option: -h
Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
New behaviour:
$ perf -h
usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
The most commonly used perf commands are:
annotate Read perf.data (created by perf record) and display annotated code
archive Create archive with object files with build-ids found in perf.data file
bench General framework for benchmark suites
...
$ perf -v
perf version 4.3.rc3.gc99e32
Updated man page.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to properly initialize column width for symbol_iaddr field, so
all symbols could fit in the column.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sorting on 'symbol' gives to broad a resolution as it can cover a range
of IP address. Use the iaddr instead to get proper sorting on IP
addresses. Need to use the 'mem_sort' feature of perf record.
New sort option is: symbol_iaddr, header label is 'Code Symbol'.
$ perf mem report --stdio -F +symbol_iaddr
# Overhead Samples Code Symbol Local Weight
# ........ ............ ........................ ............
#
54.08% 1 [k] nmi_handle 192
4.51% 1 [k] finish_task_switch 16
3.66% 1 [.] malloc 13
3.10% 1 [.] __strcoll_l 11
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We cant test 'P' modifier gets properly parsed, the functionality test
itself is beyond this suite.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'P' will cause the event to get maximum possible detected precise
level.
Following record:
$ perf record -e cycles:P ...
will detect maximum precise level for 'cycles' event and use it.
Commiter note:
Testing it:
$ perf record -e cycles:P usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (9 samples) ]
$ perf evlist
cycles:P
$ perf evlist -v
cycles:P: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1, mmap2: 1,
comm_exec: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotated_source::sizeof_sym_hist could easily overflow int size,
resulting in crash in __symbol__inc_addr_samples.
Changing its type int size_t as was probably intended from beginning
based on the initialization code in symbol__alloc_hist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because there's no point, PATH_MAX is big enough.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444068369-20978-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --interval-print parameter was limited to 100ms. However, for
example, 10ms is required to do sophisticated bandwidth analysis using
uncore events.
The test shows that the overhead of the system-wide uncore monitoring
with 10ms interval is only ~2%. So this patch reduces the minimal
interval-print allowd to 10ms.
But 10ms may not work well for all cases. For example, when the
cpus/threads number is very large, for system-wide core event monitoring
the overhead could be high.
To handle this issue, a warning will be displayed when the
interval-print is set between 10ms to 100ms. So users can make a
decision according to their specific cases.
# perf stat -e uncore_imc_1/cas_count_read/ -a --interval-print 10 -- sleep 1
print interval < 100ms. The overhead percentage could be high in some
cases. Please proceed with caution.
# time counts unit events
0.010200451 0.10 MiB uncore_imc_1/cas_count_read/
0.020475117 0.02 MiB uncore_imc_1/cas_count_read/
0.030692800 0.01 MiB uncore_imc_1/cas_count_read/
0.040948161 0.02 MiB uncore_imc_1/cas_count_read/
0.051159564 0.00 MiB uncore_imc_1/cas_count_read/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1443776674-42511-1-git-send-email-kan.liang@intel.com
[ Added warning about overhead when using sub 100ms intervals to the man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When run "perf record -e", the number of samples showed up is wrong on some
32 bit systems, i.e. powerpc and arm.
For example, run the below commands on 32 bit powerpc:
perf probe -x /lib/libc.so.6 malloc
perf record -e probe_libc:malloc -a ls perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.036 MB perf.data (13829241621624967218 samples) ]
Actually, "perf script" just shows 21 samples. The number of samples is also
absurd since samples is long type, but it is printed as PRIu64.
Build test ran on x86-64, x86, aarch64, arm, mips, ppc and ppc64.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/1443563383-4064-1-git-send-email-yang.shi@linaro.org
[ Bumped the 'hits' var used together with record.samples to 'unsigned long long' too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow probing on kernel modules when 'perf' is built without debuginfo
support.
Currently perf-probe --module requires linking with libdw, but this
doesn't make sense.
E.g.
----
# make NO_DWARF=1
# ./perf probe -m pcspkr pcspkr_event%return
Error: unknown switch `m'
----
With this patch
----
# ./perf probe -m pcspkr pcspkr_event%return
Added new event:
probe:pcspkr_event (on pcspkr_event%return in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151002125832.18617.78721.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some PMUs, like the 'intel_bts' one can be used as an event name, i.e.:
$ perf record -e intel_bts:// usleep 1
Is a valid event name.
But the code printing such PMUs was not honouring the 'event_glob'
parameter, so the following line was always appearing:
$ intel_bts// [Kernel PMU event]
Fix it:
$ [acme@felicio linux]$ perf list data
List of pre-defined events (to be used in -e):
uncore_imc/data_reads/ [Kernel PMU event]
uncore_imc/data_writes/ [Kernel PMU event]
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ajb71858n7q7ao77b8pyy74w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- intel_idle driver fixup for the recently added Skylake chips
support (Len Brown).
- Operating Performance Points (OPP) library fix related to the
recently added support for new DT bindings and a fix for a typo
in a comment (Viresh Kumar, Stephen Boyd).
- ACPI EC driver fix for a recently introduced memory leak in an
error code path (Lv Zheng).
- ACPI PCI IRQ management fix for the issue where an ISA IRQ is
shared with a PCI device which requires it to be configured in a
different way and may cause an interrupt storm to happen as a
result with an extra ACPI SCI IRQ handling simplification on top
of it (Jiang Liu).
- Update of the PCI power management documentation that became
outdated and started to actively confuse the readers to make
it actually reflect the code (Rafael J Wysocki).
- turbostat fixes including an IVB Xeon regression fix (related to
the --debug command line option), Skylake adjustment for the TSC
running at a frequency that doesn't match the base one exactly,
and a Knights Landing quirk to account for the fact that it only
updates APERF and MPERF every 1024 clock cycles plus bumping up
the turbostat version number (Len Brown, Hubert Chrzaniuk).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ELup
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are fixes mostly, for a few changes made in this cycle (the
intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and
for some issues that have just been discovered (ACPI PCI IRQ
management, PCI power management documentation, turbostat), with a
couple of cleanups on top of them.
Specifics:
- intel_idle driver fixup for the recently added Skylake chips
support (Len Brown).
- Operating Performance Points (OPP) library fix related to the
recently added support for new DT bindings and a fix for a typo in
a comment (Viresh Kumar, Stephen Boyd).
- ACPI EC driver fix for a recently introduced memory leak in an
error code path (Lv Zheng).
- ACPI PCI IRQ management fix for the issue where an ISA IRQ is
shared with a PCI device which requires it to be configured in a
different way and may cause an interrupt storm to happen as a
result with an extra ACPI SCI IRQ handling simplification on top of
it (Jiang Liu).
- Update of the PCI power management documentation that became
outdated and started to actively confuse the readers to make it
actually reflect the code (Rafael J Wysocki).
- turbostat fixes including an IVB Xeon regression fix (related to
the --debug command line option), Skylake adjustment for the TSC
running at a frequency that doesn't match the base one exactly, and
a Knights Landing quirk to account for the fact that it only
updates APERF and MPERF every 1024 clock cycles plus bumping up the
turbostat version number (Len Brown, Hubert Chrzaniuk)"
* tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbosat: update version number
tools/power turbostat: SKL: Adjust for TSC difference from base frequency
tools/power turbostat: KNL workaround for %Busy and Avg_MHz
tools/power turbostat: IVB Xeon: fix --debug regression
ACPI / PCI: Remove duplicated penalty on SCI IRQ
ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
ACPI / EC: Fix a memory leak issue in acpi_ec_query()
PM / OPP: Fix typo modifcation -> modification
PCI / PM: Update runtime PM documentation for PCI devices
PM / OPP: of_property_count_u32_elems() can return errors
intel_idle: Skylake Client Support - updated
The patch f9db0d0f1b ("perf callchain: Allow disabling call graphs
per event") added an ability to enable/disable callchain recording per
event. But it had a problem when the enablement setting is changed at
'perf report' time using -g/--call-graph option.
For example, the following scenario will get a segfault.
$ perf record -ag sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.500 MB perf.data (2555 samples) ]
$ perf report -g none
perf: Segmentation fault
-------- backtrace --------
perf[0x53a98a]
/usr/lib/libc.so.6(+0x335af)[0x7f4e91df95af]
This is because callchain_param.sort() callback was not set but it
tried to call the function as it had the PERF_SAMPLE_CALLCHAIN bit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: f9db0d0f1b ("perf callchain: Allow disabling call graphs per event")
Link: http://lkml.kernel.org/r/1443587640-24242-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top didn't add the idle/swapper thread to the machine's thread
list and its comm was displayed as ':0'. Fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top uses 'dso,symbol' sort keys by default so it overlooked a
problem in task's comm resolving. When the sort key contains 'comm',
some task's comm is not shown properly. This is because the
perf_top__mmap_read_idx() checks the cpumode value improperly.
The cpumode value of non-sample events are 0 (PERF_RECORD_MISC_CPUMODE_
UNKNOWN) so the events will be ignored by the switch statement. This patch
allows it for non-sample events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous patch added a synthesized comm event for forked child process
but it missed that the event should contain area for sample_id_hdr at
the end. It worked by accident since the perf_event union contains
bigger event structs like mmap_events.
This patch fixes it by dynamically allocating event struct including
those area like in perf_event__synthesize_thread_map().
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds a benchmark directory to the powerpc selftests and adds a
gettimeofday() benchmark to it.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the user doesn't specify any event, try the most precise "cycles"
available, i.e. start by "cycles:ppp" and go on removing "p" till it
works.
E.g.
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (11 samples) ]
$ perf evlist
cycles:pp
$ perf evlist -v
cycles:pp: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
$ grep 'model name' /proc/cpuinfo | head -1
model name : Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz
$
When 'cycles' appears explicitely is specified this will not be tried,
i.e. the user has full control of the level of precision to be used:
$ perf record -e cycles usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (9 samples) ]
$ perf evlist
cycles
$ perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2:
1, comm_exec: 1
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://www.youtube.com/watch?v=nXaxk27zwlk
Link: http://lkml.kernel.org/n/tip-b1ywebmt22pi78vjxau01wth@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can, for instance, use it with wc -l:
# perf list *:*write* | wc -l
60
Or to look for the "bio" tracepoints, without 'perf list' headers:
# perf list *:*bio* | head
block:block_bio_backmerge [Tracepoint event]
block:block_bio_bounce [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_frontmerge [Tracepoint event]
block:block_bio_queue [Tracepoint event]
block:block_bio_remap [Tracepoint event]
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ts7sc0x8u4io4cifzkup4j44@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe shows more precisely message when it finds given
%return target function is inlined.
Without this fix:
----
# ./perf probe -V getname_flags%return
Return probe must be on the head of a real function.
Debuginfo analysis failed.
Error: Failed to show vars.
----
With this fix:
----
# ./perf probe -V getname_flags%return
Failed to find "getname_flags%return",
because getname_flags is an inlined function and has no return point.
Debuginfo analysis failed.
Error: Failed to show vars.
----
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164137.3733.55055.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe --list will get a segfault if the first kprobe event is on a
module and the second or latter one is on the kernel.
e.g.
----
# ./perf probe -q -m pcspkr pcspkr_event
# ./perf probe -q vfs_read
# ./perf probe -l
Segmentation fault (core dumped)
----
This is because the debuginfo_cache fails to handle NULL module name,
which causes segfault on strcmp. (Note that strcmp("something", NULL)
always causes segfault)
To fix this debuginfo_cache__open always translates the NULL module name
to "kernel" (this is correct, because NULL module name means opening the
debuginfo for the kernel)
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event@drivers/input/misc/pcspkr.c
in pcspkr)
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164135.3733.23993.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf probe always failed to find appropriate line numbers because of
failing to find .text start address offset from debuginfo.
e.g.
----
# ./perf probe -m pcspkr pcspkr_event:5
Added new events:
probe:pcspkr_event (on pcspkr_event:5 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5 in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event_1 -aR sleep 1
# ./perf probe -l
Failed to find debug information for address ffffffffa031f006
Failed to find debug information for address ffffffffa031f016
probe:pcspkr_event (on pcspkr_event+6 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event+22 in pcspkr)
----
This fixes the above issue as below.
1. Get the relative address of the symbol in .text by using
map->start.
2. Adjust the address by adding the offset of .text section
in the kernel module binary.
With this fix, perf probe -l shows lines correctly.
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164132.3733.24643.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a trival bug about libdwfl usage of the report session, it should
explicitly begin and end a report session around dwfl_report_offline().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164128.3733.59876.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to remove dot suffix (e.g. .const, .isra) from the second or latter
events which has suffix numbers.
Since the previous commit 35a23ff928 ("perf probe: Cut off the gcc
optimization postfixes from function name") didn't care about the suffix
numbered events, therefore we'll have an error when we add additional
events on the same dot suffix functions.
e.g.
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Failed to write event: Invalid argument
Error: Failed to add events.
----
This fixes above issue as below:
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Added new events:
probe:get_sigframe (on get_sigframe.isra.2.constprop.3)
probe:get_sigframe_1 (on get_sigframe.isra.2.constprop.3)
You can now use it in all perf tools, such as:
perf record -e probe:get_sigframe_1 -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164130.3733.26573.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Map 't', 'T' (text, local, global), 'w' and 'W' (weak text, local,
global) as STT_FUNC, and the rest as STT_OBJECT
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-sbwcixulpc5v1xuxn3xvm0nn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is about binding, not type, we have just a letter in kallsyms that
should map both for the ELF type (STT_FUNC, etc) and to the ELF
symbol binding (STB_WEAK, STB_GLOBAL, etc), so rename it now before
introducing kallsyms2_elf_type()
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uu5vj343ms1q2wm55690on6v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And it is also a step in the direction of killing the separation of data
and text maps in map_groups.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rrds86kb3wx5wk8v38v56gw8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In places where we were using its open coded equivalent.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-khkdugcdoqy3tkszm3jdxgbe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_regs.c file does not get built on Powerpc as CONFIG_PERF_REGS
is false. So the weak definition for 'sample_regs_masks' doesn't get
picked up.
Adding perf_regs.o to util/Build unconditionally, exposes a redefinition
error for 'perf_reg_value()' function (due to the static inline version
in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that
function.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --max_stack option was added as an optimization to reduce processing time,
so people specifying --max-stack might get a increased processing time if
combined with synthesized callchains, but otherwise no real harm.
A warning about setting both --max_stack and the synthesized callchains max
depth seems like overkill. Amend the documentation.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/560A5155.4060105@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of map_groups__find_symbol_by_name(), so that we can turn this later
one first into a call to maps__find_symbol_by_name(MAP__FUNCTION) +
MAP__VARIABLE, and then to just one call, we'll merge MAP__FUNCTION with
MAP__VARIABLE maps, to simplify the code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pvkar0jacqn92g148u9sqttt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error variable breaks build on CentOS 6.7, due to a collision with a
global error symbol:
CC util/parse-events.o
cc1: warnings being treated as errors
util/parse-events.c:419: error: declaration of ‘error’ shadows a global
declaration
util/util.h:135: error: shadowed declaration is here
util/parse-events.c: In function ‘add_tracepoint_multi_event’:
...
Using different argument names instead to fix it.
Reported-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-tip-commits@vger.kernel.org
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150929150531.GI27383@krava.redhat.com
[ Fix one more case, at line 770 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error variable breaks build on CentOS 6.7, due to collision with
global error symbol:
CC util/evlist.o
cc1: warnings being treated as errors
In file included from util/evlist.c:28:
tools/include/linux/err.h: In function ‘ERR_PTR’:
tools/include/linux/err.h:34: error: declaration of ‘error’ shadows a global declaration
util/util.h:135: error: shadowed declaration is here
Using 'error_' name instead to fix it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-i9mdgdbrgauy3fe76s9rd125@git.kernel.org
Reported-by: Vinson Lee <vlee@twopensource.com>
[ Use 'error_' instead of 'err' to, visually, not diverge too much from include/linux/err.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New device support
* APDS9960 ALS + proximity driver
* bmg160 SPI devices.
* HDC100x humidity sensors
* Holt HI-8435 threshold detector
* mma8453Q accelerometer added to the mma8452 driver
* mma86452FC and mma8653FC accelerometers added to the mma8452 driver
* mxc4005 accelerometer
* PulsedLight LIDAR
* SensorTech VZ89x volatile organic compound sensor
* UPISEMI uS5182d ALS and proximity sensors
New core functionality
* triggered events - use triggers to check for changes in threshold type
detectors on devices with out interrupt support. First user is the holt
comparator.
* chemical concentration and resistance channel types.
New driver functionality
* vf610
- buffer support.
- followup coccinelle warning fix.
Core rework
* buffers
- break out callback buffer to own module.
- move buffer implementations to a new subdirectory
* percolate the error code form iio_event_getfd out to userspace
rather than giving a missleading error later on.
Cleanups
* adddac drivers
- use BIT macro where appropriate.
* meter drivers
- use BIT macro where appropriate.
* ad7303
- add an OF match table to line up with the binding docs.
* adc128s052
- add an OF match table to line up with the binding docs.
* adf4350
- add an OF match table to line up with the binding docs
* as3935
- add an OF match table to line up with the binding docs.
* berlin2-adc
- use GENMASK and BIT for masks
- prevent attempting to sample multiple channels at once by moving a
mutex scop
- coding style cleanups
* bmg150_magn
- kconfig sort order was wrong - fix it.
* bmg160
- use i2c regmap and drop all uses of i2c_client
- separate i2c and core driver
* cc10001_adc
- kconfig sort order was wrong - fix it.
* evgen (dummy driver helper module)
- move interrupt generation to irq_work to reduce differences between
the dummy driver and real hardware drivers.
* hmc5843
- set the name dynamically rather than to a fixed value for one of the
suported parts.
- export module alias information to allow autoprobing of module.
* lpc32xx
- on failure to get resource or irq return -ENXIO as uppose to -EBUSY
* max1027
- set .of_match_table to actually allow OF style matching.
* max5821
- add MODULE_DEVICE_TABLE for OF table.
* mma8452
- refactor to separate out chip specific data.
- add freefall / motion interrupt source for devices that do their
interrupts slightly differently.
- update copywrite notice.
- leave naming of events directory in sysfs to the core
* mcp320x
- set .of_match_table so that it can be use for OF style matching.
* mlx90614
- Implement filter configuration (note the datasheet changed as a result
of the driver reviews to include the values we needed ;)
* opt3001
- drop .owner field as assigned by platform driver core.
* si7020
- replace a bitmask on the humidity values with a more correct range
check.
* stk310
- improved error handling.
- use BIT macro where appropriate and use the resulting defines
instead of magic numbers in the code.
- fix indentation
* st-sensors
- add debugfs register read hook
* tsl4531
- fix error handling in check_id
* twl6030
- fix module autoload for OF
* iio-trig-sysfs
- document add and remove attribute
* trigger in staging
- code alignment fixes.
- braces on both branches of if statement if needed for one.
* xilinx-xadc
- push interrupts into hardirq context as there isn't much in them
any more and it avoids breaking PREEMPT_RT builds due to the use
of a spinlock between the hardirq and the thread.
Tools
* event-monitor
- report unsupported events. We keep expanding what can come from drivers
so give a helpful error if one turns up in an out of date userspace
program.
* generic-buffer
- helpful message about needing to enable a channel to start the buffer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=E+jf
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new driver, new functionality and cleanups for IIO in the 4.4 cycle
New device support
* APDS9960 ALS + proximity driver
* bmg160 SPI devices.
* HDC100x humidity sensors
* Holt HI-8435 threshold detector
* mma8453Q accelerometer added to the mma8452 driver
* mma86452FC and mma8653FC accelerometers added to the mma8452 driver
* mxc4005 accelerometer
* PulsedLight LIDAR
* SensorTech VZ89x volatile organic compound sensor
* UPISEMI uS5182d ALS and proximity sensors
New core functionality
* triggered events - use triggers to check for changes in threshold type
detectors on devices with out interrupt support. First user is the holt
comparator.
* chemical concentration and resistance channel types.
New driver functionality
* vf610
- buffer support.
- followup coccinelle warning fix.
Core rework
* buffers
- break out callback buffer to own module.
- move buffer implementations to a new subdirectory
* percolate the error code form iio_event_getfd out to userspace
rather than giving a missleading error later on.
Cleanups
* adddac drivers
- use BIT macro where appropriate.
* meter drivers
- use BIT macro where appropriate.
* ad7303
- add an OF match table to line up with the binding docs.
* adc128s052
- add an OF match table to line up with the binding docs.
* adf4350
- add an OF match table to line up with the binding docs
* as3935
- add an OF match table to line up with the binding docs.
* berlin2-adc
- use GENMASK and BIT for masks
- prevent attempting to sample multiple channels at once by moving a
mutex scop
- coding style cleanups
* bmg150_magn
- kconfig sort order was wrong - fix it.
* bmg160
- use i2c regmap and drop all uses of i2c_client
- separate i2c and core driver
* cc10001_adc
- kconfig sort order was wrong - fix it.
* evgen (dummy driver helper module)
- move interrupt generation to irq_work to reduce differences between
the dummy driver and real hardware drivers.
* hmc5843
- set the name dynamically rather than to a fixed value for one of the
suported parts.
- export module alias information to allow autoprobing of module.
* lpc32xx
- on failure to get resource or irq return -ENXIO as uppose to -EBUSY
* max1027
- set .of_match_table to actually allow OF style matching.
* max5821
- add MODULE_DEVICE_TABLE for OF table.
* mma8452
- refactor to separate out chip specific data.
- add freefall / motion interrupt source for devices that do their
interrupts slightly differently.
- update copywrite notice.
- leave naming of events directory in sysfs to the core
* mcp320x
- set .of_match_table so that it can be use for OF style matching.
* mlx90614
- Implement filter configuration (note the datasheet changed as a result
of the driver reviews to include the values we needed ;)
* opt3001
- drop .owner field as assigned by platform driver core.
* si7020
- replace a bitmask on the humidity values with a more correct range
check.
* stk310
- improved error handling.
- use BIT macro where appropriate and use the resulting defines
instead of magic numbers in the code.
- fix indentation
* st-sensors
- add debugfs register read hook
* tsl4531
- fix error handling in check_id
* twl6030
- fix module autoload for OF
* iio-trig-sysfs
- document add and remove attribute
* trigger in staging
- code alignment fixes.
- braces on both branches of if statement if needed for one.
* xilinx-xadc
- push interrupts into hardirq context as there isn't much in them
any more and it avoids breaking PREEMPT_RT builds due to the use
of a spinlock between the hardirq and the thread.
Tools
* event-monitor
- report unsupported events. We keep expanding what can come from drivers
so give a helpful error if one turns up in an out of date userspace
program.
* generic-buffer
- helpful message about needing to enable a channel to start the buffer.
The function returns always non-negative values.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds rules for parsing tracepoint names. Change rules of tracepoint which
derives from PE_NAMEs into tracepoint names directly, so adding more rules
based on tracepoint names will be easier.
Changes v2-v3:
- Change __event_legacy_tracepoint label in bison file to tracepoint_name
- Fix formats error.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-3-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, function config_term() is used for checking config terms of
all types of events, while unknown terms is not reported as an error
because pmu events have valid terms in sysfs.
But this is wrong when unknown terms are specificed to hw/sw events.
This patch Adds the config_term callback so we can use separate check
routines for each type of events.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
autofdo incorrectly expects branch flags to include either mispred or
predicted. In fact mispred = predicted = 0 is valid and means the flags
are not supported, which they aren't by Intel PT.
To make autofdo work, add a config option which will cause Intel PT
decoder to set the mispred flag on all branches.
Below is an example of using Intel PT with autofdo. The example is
also added to the Intel PT documentation. It requires autofdo
(https://github.com/google/autofdo) and gcc version 5. The bubble
sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial)
amended to take the number of elements as a parameter.
$ gcc-5 -O3 sort.c -o sort_optimized
$ ./sort_optimized 30000
Bubble sorting array of 30000 elements
2254 ms
$ cat ~/.perfconfig
[intel-pt]
mispred-all
$ perf record -e intel_pt//u ./sort 3000
Bubble sorting array of 3000 elements
58 ms
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 3.939 MB perf.data ]
$ perf inject -i perf.data -o inj --itrace=i100usle --strip
$ ./create_gcov --binary=./sort --profile=inj --gcov=sort.gcov -gcov_version=1
$ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo
$ ./sort_autofdo 30000
Bubble sorting array of 30000 elements
2155 ms
Note there is currently no advantage to using Intel PT instead of LBR,
but that may change in the future if greater use is made of the data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new option --strip which is used with --itrace to strip out
non-synthesized events. This results in a perf.data file that is
simpler for external tools to parse. In particular, this can be used to
prepare a perf.data file for consumption by autofdo.
A subsequent patch makes a change to Intel PT also to enable use with
autofdo and gives an example of that use.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-25-git-send-email-adrian.hunter@intel.com
[ Made it use perf_evlist__remove() + perf_evsel__delete() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf inject can process instruction traces (using the --itrace option)
which removes aux-related events and replaces them with the requested
synthesized events.
However there are still some leftovers, namely PERF_RECORD_ITRACE_START
events and the original evsel (selected event) e.g. intel_pt//
For the sake of completeness, remove them too.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-24-git-send-email-adrian.hunter@intel.com
[ Made it use perf_evlist__remove() + perf_evsel__delete() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a counterpart to perf_evlist__add() that does the opposite and
deletes the evsel.
This will be used by perf inject to remove unwanted evsels.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-23-git-send-email-adrian.hunter@intel.com
[ Renamed it from perf_evlist__del() to perf_evlist__remove() and removed the perf_evsel__delete() call ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__id2evsel_strict() is the same as perf_evlist__id2evsel()
except that it ensures that the id must match.
This will be used by perf inject to find a specific evsel that is to be
deleted, hence the need to match exactly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-22-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script has a setting to set the maximum stack depth when processing
callchains. The setting defaults to the hard-coded maximum definition
PERF_MAX_STACK_DEPTH which is 127.
It is possible, when processing instruction traces, to synthesize
callchains. Synthesized callchains do not have the kernel size
limitation and are whatever size the user requests, although validation
presently prevents the user requested a value greater that 1024. The
default value is 16.
To allow for synthesized callchains, make the scripting_max_stack value
at least the same size as the synthesized callchain size.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-21-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the max_stack value instead of PERF_MAX_STACK_DEPTH so that
arbitrary-sized callchains can be supported.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report has an option (--max-stack) to set the maximum stack depth
when processing callchains. The option defaults to the hard-coded
maximum definition PERF_MAX_STACK_DEPTH which is 127. The intention of
the option is to allow the user to reduce the processing time by
reducing the amount of the callchain that is processed.
It is also possible, when processing instruction traces, to synthesize
callchains. Synthesized callchains do not have the kernel size
limitation and are whatever size the user requests, although validation
presently prevents the user requested a value greater that 1024. The
default value is 16.
To allow for synthesized callchains, make the max_stack value at least
the same size as the synthesized callchain size.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for generating branch stack context for PT samples. The
decoder reports a configurable number of branches as branch context for
each sample. Internally it keeps track of them by using a simple sliding
window. We also flush the last branch buffer on each sample to avoid
overlapping intervals.
This is useful for:
- Reporting accurate basic block edge frequencies through the perf
report branch view
- Using with --branch-history to get the wider context of samples
- Other users of LBRs
Also the Documentation is updated.
Examples:
Record with Intel PT:
perf record -e intel_pt//u ls
Branch stacks are used by default if synthesized so:
perf report --itrace=ile
is the same as:
perf report --itrace=ile -b
Branch history can be requested also:
perf report --itrace=igle --branch-history
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_synth_branch_sample() skips synthesizing if the branch does not
match the branch filter. That logic was sitting in the middle of the
function but is more efficiently placed at the start of the function, so
move it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch stack feature flag is set by 'perf record' when recording
data that contains branch stacks. Consequently, when 'perf inject'
synthesizes branch stacks, the feature flag should be set also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A non-synthesized event might not have a branch stack if branch stacks
have been synthesized (using itrace options).
An example of that is when Intel PT records sched_switch events for
decoding purposes. Those sched_switch events do not have branch stacks
even though the Intel PT decoder may be synthesizing other events that
do due to the itrace options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf report' tool will default to displaying branch stacks (-b
option) if they are present. Make that also happen for synthesized
branch stacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report looks at event sample types to determine if branch stacks
have been sampled. Adjust the validation to know about instruction
tracing options.
This change allows the use of the -b option which otherwise would
complain with an error like:
Error:
Selected -b but no branch data. Did you call perf record without -b?
# To display the perf.data header info,
# please use --header/--header-only options.
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add AUX area tracing option 'l' to synthesize branch stacks on samples
just like sample type PERF_SAMPLE_BRANCH_STACK. This is taken into use
by Intel PT in a subsequent patch.
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some comments to the script and some 'views' to the created database
that better illustrate the database structure and how it can be used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default 'perf record' will postprocess the perf.data file to
determine build-ids. When that happens, the number of lost perf events
is displayed.
Make that also happen for AUX events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option --ns to display time to 9 decimal places. That is useful in
some cases, for example when using Intel PT cycle accurate mode.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Logging is only used for debugging. Use macros to save calling into the
functions only to return immediately when logging is not enabled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TSC packets contain only 7 bytes of TSC. The 8th byte is assumed to
change so infrequently that its value can be inferred. However the
logic must cater for a 7 byte wraparound, which it does by adding 1 to
the top byte.
The existing code was doing that with a while loop even though the
addition should only need to be done once. That logic won't work (will
loop forever) if TSC wraps around at the 8th byte. Theoretically that
would take at least 10 years, unless something else went wrong.
And what else could go wrong. Well, if the chunks of trace data are
processed out of order, it will make it look like the 7-byte TSC has
gone backwards (i.e. wrapped). If that happens 256 times then stuck in
the while loop it will be.
Fix that by getting rid of the unnecessary while loop.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Processing instruction tracing data (e.g. Intel PT) can synthesize
callchains e.g.
$ perf record -e intel_pt//u uname
$ perf report --stdio --itrace=ige
However perf report's callgraph option gets extra validation, so:
$ perf report --stdio --itrace=ige -gflat
Error:
Selected -g or --branch-history but no callchain data. Did
you call 'perf record' without -g?
# To display the perf.data header info,
# please use --header/--header-only options.
#
Fix the validation to know about instruction tracing options so
above command works.
A side-effect of the change is that the default option to
accumulate the callchain of child functions comes into force.
To get the previous behaviour the --no-children option can be
used e.g.
$ perf report --stdio --itrace=ige -gflat --no-children
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction tracing options (i.e. --itrace) include an option for
sampling instructions at an arbitrary period. e.g.
--itrace=i10us
means make an 'instructions' sample for every 10us of trace.
Currently the logic does not distinguish between a period of
zero and no period being specified at all, so it gets treated
as the default period which is 100000. That doesn't really
make sense.
Fix it so that zero period is accepted and treated as meaning
"as often as possible".
In the case of Intel PT that is the same as a period of 1 and
a unit of 'instructions' (i.e. --itrace=i1i).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-2-git-send-email-adrian.hunter@intel.com
[ Add a few lines describing this in the Documentation/intel-pt.txt file ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the fixdep target into the Makefile.include to ease up building of
fixdep helper, that needs to be built before we dive in to the build itself.
The user can invoke the fixdep target to build the helper.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And use the new 'prepare' target for the $(PERF_IN) target.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making the fixdep helper to be invoked within dep-cmd.
Each user of the build framework needs to make sure fixdep exists before
executing the build itself.
If the build doesn't find fixdep, it falls back to the old style
dependency tracking.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's easier to add more functionality in the following commit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For dependency tracking we currently use targets that fall out of the
gcc -MD command. We store this info in the .cmd file and include as
makefile during the build.
This format put object as target and all the c and header files as
dependencies, like:
util/abspath.o: util/abspath.c /usr/include/stdc-predef.h util/cache.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
...
If any of those dependency header files (krava.h below) is removed the
build fails on:
make[1]: *** No rule to make target 'krava.h', needed by 'inc.o'. Stop.
This patch adds fixdep helper, that is used by kbuild to alter the shape
of the object dependencies like:
source_util/abspath.o := util/abspath.c
deps_util/abspath.o := \
/usr/include/stdc-predef.h \
util/cache.h \
...
util/abspath.o: $(deps_util/abspath.o)
$(deps_util/abspath.o):
With this format the header removal won't make the build fail, because
it'll be picked up by the last empty target defined for each header.
As previously mentioned the fixdep tool is taken from kbuild. It's not
complete backport, only the part that alters the standard dependency
info was taken, the part that adds the CONFIG_* dependency logic will be
probably taken later on.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kai Germaschewski <kai.germaschewski@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current build framework fails to cope with header file removal. The
reason is that the removed header file stays in the .cmd file target
rule and forces the build to fail.
This issue is fixed and explained in the following patches.
Adding a new build test that simulates header removal.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To ease up build framework code setup for users.
More shared code will be added in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Storing the actual tracing path mountpoint to display correct
error message hint ('Hint:' line). The error hint rediscovers
mountpoints, but it could be different from what we actually
used in tracing path.
Before we'd display debugfs mount even though tracefs was used:
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
...
After this change, correct mountpoint is displayed:
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1442674027-19427-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The map is what should say if an ELF (or some other format) image is
being used for some particular purpose, as a kernel, host or guest.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zufousvfar0710p4qj71c32d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using dso->kernel, this is equivalent at the moment,
and helps in reducing the accesses to dso->kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1pc2v63iphtifovw3bv0bo1v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"Another pile of fixes for perf:
- Plug overflows and races in the core code
- Sanitize the flow of the perf syscall so we error out before
handling the more complex and hard to undo setups
- Improve and fix Broadwell and Skylake hardware support
- Revert a fix which broke what it tried to fix in perf tools
- A couple of smaller fixes in various places of perf tools"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix copying of /proc/kcore
perf intel-pt: Remove no_force_psb from documentation
perf probe: Use existing routine to look for a kernel module by dso->short_name
perf/x86: Change test_aperfmperf() and test_intel() to static
tools lib traceevent: Fix string handling in heterogeneous arch environments
perf record: Avoid infinite loop at buildid processing with no samples
perf: Fix races in computing the header sizes
perf: Fix u16 overflows
perf: Restructure perf syscall point of no return
perf/x86/intel: Fix Skylake FRONTEND MSR extrareg mask
perf/x86/intel/pebs: Add PEBS frontend profiling for Skylake
perf/x86/intel: Make the CYCLE_ACTIVITY.* constraint on Broadwell more specific
perf tools: Bool functions shouldn't return -1
tools build: Add test for presence of __get_cpuid() gcc builtin
tools build: Add test for presence of numa_num_possible_cpus() in libnuma
Revert "perf symbols: Fix mismatched declarations for elf_getphdrnum"
perf stat: Fix per-pkg event reporting bug
For ctrl out test, it needs length > vary, so in order to run it with
default parameters, we do this change.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The 'length' is the transfer length, not the packet size, so
change the help text.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Pull turbostat updates for v4.3 from Len Brown.
* 'turbostat' of https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbosat: update version number
tools/power turbostat: SKL: Adjust for TSC difference from base frequency
tools/power turbostat: KNL workaround for %Busy and Avg_MHz
tools/power turbostat: IVB Xeon: fix --debug regression
On a Skylake with 1500MHz base frequency,
the TSC runs at 1512MHz.
This is because the TSC is no longer in the n*100 MHz BCLK domain,
but is now in the m*24MHz crystal clock domain. (24 MHz * 63 = 1512 MHz)
This adds error to several calculations in turbostat,
unless the TSC sample sizes are adjusted for this difference.
Note that calculations in the time domain are immune
from this issue, as the timing sub-system has already
calibrated the TSC against a known wall clock.
AVG_MHz = APERF_delta/measurement_interval
need no adjustment. APERF_delta is in the BCLK domain,
and measurement_interval is in the time domain.
TSC_MHz = TSC_delta/measurement_interval
needs no adjustment -- as we really do want to report
the actual measured TSC delta here, and measurement_interval
is in the accurate time domain.
%Busy = MPERF_delta/TSC_delta
needs adjustment to use TSC_BCLK_DOMAIN_delta.
TSC_BCLK_DOMAIN_delta = TSC_delta * base_hz / tsc_hz
Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
need adjustment as above.
No other metrics in turbostat need to be adjusted.
Before:
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz
- 550 24.84 2216 1512
0 2191 98.73 2219 1514
2 0 0.01 2130 1512
1 9 0.43 2016 1512
3 2 0.08 2016 1512
After:
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz
- 550 25.05 2198 1512
0 2190 99.62 2199 1512
2 0 0.01 2152 1512
1 9 0.46 2000 1512
3 2 0.10 2000 1512
Note that in this example, the "Before" Bzy_MHz
was reported as exceeding the 2200 max turbo rate.
Also, even a pinned spin loop would not be reported
as over 99% busy.
Signed-off-by: Len Brown <len.brown@intel.com>
KNL increments APERF and MPERF every 1024 clocks.
This is compliant with the architecture specification,
which requires that only the ratio of APERF/MPERF need be valid.
However, turbostat takes advantage of the fact that these
two MSRs increment every un-halted clock
at the actual and base frequency:
AVG_MHz = APERF_delta/measurement_interval
%Busy = MPERF_delta/TSC_delta
This quirk is needed for these calculations to also work on KNL,
which would otherwise show a value 1024x smaller than expected.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Staring in Linux-4.3-rc1,
commit 6fb3143b56 ("tools/power turbostat: dump CONFIG_TDP")
touches MSR 0x648, which is not supported on IVB-Xeon.
This results in "turbostat --debug" exiting on those systems:
turbostat: /dev/cpu/2/msr offset 0x648 read failed: Input/output error
Remove IVB-Xeon from the list of machines supporting with that MSR.
Signed-off-by: Len Brown <len.brown@intel.com>
A copy of /proc/kcore containing the kernel text can be made to the
buildid cache. e.g.
perf buildid-cache -v -k /proc/kcore
To workaround objdump limitations, a copy is also made when annotating
against /proc/kcore.
The copying process stops working from libelf about v1.62 onwards (the
problem was found with v1.63).
The cause is that a call to gelf_getphdr() in kcore__add_phdr() fails
because additional validation has been added to gelf_getphdr().
The use of gelf_getphdr() is a misguided attempt to get default
initialization of the Gelf_Phdr structure. That should not be
necessary because every member of the Gelf_Phdr structure is
subsequently assigned. So just remove the call to gelf_getphdr().
Similarly, a call to gelf_getehdr() in gelf_kcore__init() can be
removed also.
Committer notes:
Note to stable@kernel.org, from Adrian in the cover letter for this
patchkit:
The "Fix copying of /proc/kcore" problem goes back to v3.13 if you think
it is important enough for stable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1443089122-19082-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
no_force_psb was dropped as a late change to the kernel driver.
Consequently, remove it from the documentation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443089122-19082-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have map_groups__find_by_name() to look at the list of modules that
are in place for a given machine, so use it instead of traversing the
machine dso list, which also includes DSOs for userspace.
When merging the user and kernel DSO lists a bug was introduced where
'perf probe' stopped being able to add probes to modules using its short
name:
# perf probe -m usbnet --add usbnet_start_xmit
usbnet_start_xmit is out of .text, skip it.
Error: Failed to add events.
#
With this fix it works again:
# perf probe -m usbnet --add usbnet_start_xmit
Added new event:
probe:usbnet_start_xmit (on usbnet_start_xmit in usbnet)
You can now use it in all perf tools, such as:
perf record -e probe:usbnet_start_xmit -aR sleep 1
#
Reported-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 3d39ac5386 ("perf machine: No need to have two DSOs lists")
Link: http://lkml.kernel.org/r/20150924015008.GE1897@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Fix a segfault in 'perf probe' when removing uprobe events (Masami Hiramatsu)
- Synthesize COMM event for workloads started from the command line in 'perf
record' so that we can have the pid->comm mapping before we get the real
PERF_RECORD_COMM switching from perf to the workload (Namhyung Kim)
- Fix build tools/vm/ due to removal of tools/lib/api/fs/debugfs.h
(Arnaldo Carvalho de Melo)
Developer stuff:
- Fix the make tarball targets by including the recently added err.h header in
the perf MANIFEST file (Jiri Olsa)
- Don't assume that the event parser returns a non empty evlist (Wang Nan)
- Add way to disambiguate feature detection state files, needed to use
tools/build feature detection for multiple components in a single O= output
dir, which will be the case with tools/perf/ and tools/lib/bpf/
(Arnaldo Carvalho de Melo)
- Fixup FEATURE_{TESTS,DISPLAY} inversion in tools/lib/bpf/ (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6DJ/
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Fix a segfault in 'perf probe' when removing uprobe events. (Masami Hiramatsu)
- Synthesize COMM event for workloads started from the command line in 'perf
record' so that we can have the pid->comm mapping before we get the real
PERF_RECORD_COMM switching from perf to the workload. (Namhyung Kim)
- Fix build tools/vm/ due to removal of tools/lib/api/fs/debugfs.h.
(Arnaldo Carvalho de Melo)
Infrastructure changes:
- Fix the make tarball targets by including the recently added err.h header in
the perf MANIFEST file. (Jiri Olsa)
- Don't assume that the event parser returns a non empty evlist. (Wang Nan)
- Add way to disambiguate feature detection state files, needed to use
tools/build feature detection for multiple components in a single O= output
dir, which will be the case with tools/perf/ and tools/lib/bpf/.
(Arnaldo Carvalho de Melo)
- Fixup FEATURE_{TESTS,DISPLAY} inversion in tools/lib/bpf/. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When perf creates a new child to profile, the events are enabled on
exec(). And in this case, it doesn't synthesize any event for the
child since they'll be generated during exec(). But there's an window
between the enabling and the event generation.
It used to be overcome since samples are only in kernel (so we always
have the map) and the comm is overridden by a later COMM event.
However it won't work if events are processed and displayed before the
COMM event overrides like in 'perf script'. This leads to those early
samples (like native_write_msr_safe) not having a comm but pid (like
':15328').
So it needs to synthesize COMM event for the child explicitly before
enabling so that it can have a correct comm. But at this time, the
comm will be "perf" since it's not exec-ed yet.
Committer note:
Before this patch:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task-events
:4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429
usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4.
usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so)
usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429)
After:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task
perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446
perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446
usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1
usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so)
usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There were some changes in how this debugfs mounting helper is
implemented/exported and we forgot to check if there were other users
besides perf, fix it.
Need to do a make -C tools/ everytime we do changes to
tools/{lib,include} and other places where we're moving things from
tools/perf/ to be used by other tools/ living code.
Fixed:
$ make -C tools/vm
make: Entering directory '/home/git/linux/tools/vm'
make -C ../lib/api
make[1]: Entering directory '/home/git/linux/tools/lib/api'
CC fd/array.o
LD fd/libapi-in.o
CC fs/fs.o
CC fs/tracing_path.o
LD fs/libapi-in.o
CC cpu.o
LD libapi-in.o
AR libapi.a
make[1]: Leaving directory '/home/git/linux/tools/lib/api'
gcc -Wall -Wextra -I../lib/ -o page-types page-types.c ../lib/api/libapi.a
make: Leaving directory '/home/git/linux/tools/vm'
$
Reported-by: Vinson Lee <vlee@twopensource.com>
Tested-by: Vinson Lee <vlee@twopensource.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 60a1133a5b ("tools lib api fs: Remove debugfs, tracefs and findfs objects")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need to specify an explicit rule in the Makefile, the implicit
one will do the same. The "__EXPORTED_HEADERS__" define is not needed,
because we build the test against the installed kernel headers, not the
in-tree kernel headers. Re-use "$(TEST_PROGS)" in the clean target
rather than spelling the executable name twice. Include <unistd.h>
rather than the rather specific <asm-generic/unistd.h>. Include
<syscall.h> rather than <sys/syscall.h>. In both cases, the former
header is located in a standard location and includes the latter.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On ppc big endian this check fails, the mutex doesn't necessarily need
to be identical for all pages after pthread_mutex_lock/unlock cycles.
The count verification (outside of the pthread_mutex_t structure)
suffices and that is retained.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will report the error in the exit code, in addition of the fprintf.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keep a non-zero placeholder after the count, for the my_bcmp comparison
of the page against the zeropage. The lockless increment between 255 to
256 against a lockless my_bcmp could otherwise return false positives on
ppc32le.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If __NR_userfaultfd is not yet defined by the arch, warn but still build
and run the userfaultfd selftest successfully.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Depend on "make headers_install" to create proper headers to include and
provide syscall numbers.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the usr/include subdirectory of the top-level tree to the include
path, and make sure to include headers without relative paths to make
sure the sanitized headers get picked up. Otherwise the compiler will
not be able to find the linux/compiler.h header included by the non-
sanitized include/uapi/linux/userfaultfd.h.
While at it, make sure to only hardcode the syscall numbers on x86 and
PowerPC if they haven't been properly picked up from the headers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of calling strlen on every iteration of the for loop, just call it
once and cache the result in a temporary local variable which will be used
in the for loop instead.
Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a trace recorded on a 32-bit device is processed with a 64-bit
binary, the higher 32-bits of the address need to ignored.
The lack of this results in the output of the 64-bit pointer
value to the trace as the 32-bit address lookup fails in find_printk().
Before:
burn-1778 [003] 548.600305: bputs: 0xc0046db2s: 2cec5c058d98c
After:
burn-1778 [003] 548.600305: bputs: 0xc0046db2s: RT throttling activated
The problem occurs in PRINT_FIELD when the field is recognized as a
pointer to a string (of the type const char *)
Heterogeneous architectures cases below can arise and should be handled:
* Traces recorded using 32-bit addresses processed on a 64-bit machine
* Traces recorded using 64-bit addresses processed on a 32-bit machine
Reported-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1442928123-13824-1-git-send-email-kapileshwar.singh@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise the tarpkg is incomplete (tarpkg tests fails).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 01ca9fd41d ("tools: Add err.h with ERR_PTR PTR_ERR interface")
Link: http://lkml.kernel.org/r/1442846143-8556-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building tools/lib/bpf as part of the tools/perf/ build process,
which will happend when we introduce a patch wiring that up, we end up
stomping on the feature detection caching mechanism, that uses a file in
the output directory (O=) that is shared by libbpf and perf to check if
something changed from one build to another that requires redoing the
feature detection process.
By using the recently introduced FEATURE_USER tools/build/ knob, we can
avoid that:
Before, every make invokation would run the feature detection:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
<SNIP>
... get_cpuid: [ on ]
... bpf: [ on ]
GEN perf-archive
GEN perf-with-kcore
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
<SNIP>
After:
$ make O=/tmp/build/perf -C tools/perf
make: Entering directory '/home/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
make: Leaving directory '/home/git/linux/tools/perf'
$
Because we now have two different feature detection state files:
$ ls -la /tmp/build/perf/FEATURE-DUMP*
-rw-rw-r--. 1 acme acme 338 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP
-rw-rw-r--. 1 acme acme 33 Sep 21 17:25 /tmp/build/perf/FEATURE-DUMP.libbpf
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-s6ev9wfqy7pvvs58emys2g90@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use the tools/build/ autodetection in the eBPF patchkit
and it is currently sharing the output directory with perf, that
also uses the feature detection logic.
As we keep state in the output directory, so that we can avoid running
all the tests again, we need to have different filenames for the files
used in this state, allow doing that via the FEATURE_USER variable, to
be set alongside the existing FEATURE_{TEST,DISPLAY} variables.
v2: Fix comment describing the FEATURE_DUMP filename to make sure where
it is created, precisely at $(OUTPUT)FEATURE-DUMP$(FEATURE_USER).
Pointed out by Jiri.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-fdbev0vrn3x6idqc3ajbnvcb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libbpf was introduced it wrongly asked for the "libelf" and "bpf"
feature tests to be performed (via FEATURE_TESTS), while asking that
"libbpf", "libelf-mmap", "libelf-getphdrnum" and "bpf" to have the
result of its respective tests to be displayed (via FEATURE_DISPLAY).
Due to another recently bug fixed in the tools/build/ infrastructure
("tools build: Fixup feature detection display function name") the
results for the entries in the FEATURE_DISPLAY, for this case, were
appearing as all succeeding, when two of them (the ones only on the
DISPLAY) were not even being performed.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
After, with FEATURE_TESTS == FEATURE_DISPLAY:
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
I just inverted, so that it tests the four features but displays just
the libelf and mmap ones, to make it more compact. So it becomes:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/n/tip-y4bd59e6j9rzzojiyeqrg2jq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cut'n'paste mistake, it should eval the name of the function
defined right next to it, in the next line, fix it.
Before:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... bpf: [ on ]
<SNIP>
After:
$ make -C tools/lib/bpf/
make: Entering directory '/home/git/linux/tools/lib/bpf'
Auto-detecting system features:
... libelf: [ on ]
... libelf-getphdrnum: [ OFF ]
... libelf-mmap: [ OFF ]
... bpf: [ on ]
<SNIP>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 58d4f00ff1 ("perf build: Fix feature_check name clash")
Link: http://lkml.kernel.org/n/tip-dzu1c4sruukgfq5d5b1c4r30@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't blindly retrieve and use a last element in the lists returned by
parse_events__scanner(), as it may have collected no entries, i.e.
return an empty list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a segfault bug and a small mistake in perf probe -d.
Since the "ulist" in perf_del_probe_events is never initialized,
strlist__add(ulist, *) always causes a segfault when removing
uprobe events by perf probe -d.
Also, the "str" local variable is never released if fail to
allocate the "klist". This fixes it too.
This has been introduced by the commit e607f1426b ("perf probe:
Print deleted events in cmd_probe()").
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150916125241.4446.44805.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull s390 fixes from Martin Schwidefsky:
"A couple of system call updates. The two new system calls userfaultfd
and membarrier have been added, as well as the 17 direct calls for the
multiplexed socket system calls.
In addition the system call compat wrappers have been flagged as
notrace functions and a few wrappers could be removed.
And bug fixes for the vector register handling, cpu_mf, suspend/resume,
compat signals, SMT cputime accounting and the zfcp dumper"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up separate socketcalls system calls
s390/compat: remove superfluous compat wrappers
s390/compat: do not trace compat wrapper functions
s390/s390x: allocate sys_membarrier system call number
s390/configs//zfcpdump_defconfig: Remove CONFIG_MEMSTICK
s390: wire up userfaultfd system call
s390/vtime: correct scaled cputime for SMT
s390/cpum_cf: Corrected return code for unauthorized counter sets
s390/compat: correct uc_sigmask of the compat signal frame
s390: fix floating point register corruption
s390/hibernate: fix save and restore of vector registers
This fixes the virtio-test tool, and improves
the error handling for virtio-ccw.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV+TrqAAoJECgfDbjSjVRpsBwH/0CqspPuCPR/QMHmw0w66lQh
I2kYdkvJy/nAXtY+6JHhVgxbPzJeZ2im5BK3+8pIUoMXSHRn1QMn+/a0WCA0GvC2
iXSnIGFs/gMK80k2ULrf9HmopnxVtEZUY+6/DQXYD3lRDi25k8Xbs5x4ygPwGywD
iV5/JPNjJvWLQQ4uDnlp6SoPfxa/P8lbpdZlIJHKAM0pTuWeU4rgncMo8SvHjVEL
zyrg3ofDq3V0objwLOnLk0Z8i6uwEQrfZzprvDcZglK58B+jWm2cuAiaGoLHgwN6
xkSQEWMKeV66FTuqzI+bCsvWf04+EkGbxk75RLx3GfT2LJg59XgxqEpN7yOCKFg=
=O2nr
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes and cleanups from Michael Tsirkin:
"This fixes the virtio-test tool, and improves the error handling for
virtio-ccw"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: handle failures of READ_VQ_CONF ccw
tools/virtio: propagate V=X to kernel build
vhost: move features to core
tools/virtio: fix build after 4.2 changes
If a session contains no events, we can get stuck in an infinite loop in
__perf_session__process_events, with a non-zero file_size and data_offset, but
a zero data_size.
In this case, we can mmap the entirety of the file (consisting of the file and
attribute headers), and fetch_mmaped_event will correctly refuse to read any
(unmapped and non-existent) event headers. This causes
__perf_session__process_events to unmap the file and retry with the exact same
parameters, getting stuck in an infinite loop.
This has been observed to result in an exit-time hang when counting
rare/unschedulable events with perf record, and can be triggered artificially
with the script below:
----
#!/bin/sh
printf "REPRO: launching perf\n";
./perf record -e software/config=9/ sleep 1 &
PERF_PID=$!;
sleep 0.002;
kill -2 $PERF_PID;
printf "REPRO: waiting for perf (%d) to exit...\n" "$PERF_PID";
wait $PERF_PID;
printf "REPRO: perf exited\n";
----
To avoid this, have __perf_session__process_events bail out early when
the file has no data (i.e. it has no events).
Commiter note:
I only managed to reproduce this when setting
/proc/sys/kernel/kptr_restrict to '1' and changing the code to
purposefully not process any samples and no synthesized samples, i.e.
kptr_restrict prevents 'record' from synthesizing the kernel mmaps for
vmlinux + modules and since it is a workload started from perf, we don't
synthesize mmap/comm records for existing threads.
Adrian Hunter managed to reproduce it in his environment tho.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1442423929-12253-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This new test checks that all x86 registers are preserved across
32-bit syscalls. It tests syscalls through VDSO (if available)
and through INT 0x80, normally and under ptrace.
If kernel is a 64-bit one, high registers (r8..r15) are poisoned
before the syscall is called and are checked afterwards.
They must be either preserved, or cleared to zero (but r11 is
special); r12..15 must be preserved for INT 0x80.
EFLAGS is checked for changes too, but change there is not
considered to be a bug (paravirt kernels do not preserve
arithmetic flags).
Run-tested on 64-bit kernel:
$ ./test_syscall_vdso_32
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by
SYSRET insn [OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
On 32-bit paravirt kernel:
$ ./test_syscall_vdso_32
[NOTE] Not a 64-bit kernel, won't test R8..R15 leaks
[RUN] Executing 6-argument 32-bit syscall via VDSO
[WARN] Flags before=0000000000200ed7 id 0 00 o d i s z 0 a 0 p 1 c
[WARN] Flags after=0000000000200246 id 0 00 i z 0 0 p 1
[WARN] Flags change=0000000000000c91 0 00 o d s 0 a 0 0 c
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1442427809-2027-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- When handling perf_event_open() returning EBUSY and not being able to opendir
the procfs mount point we would tell the user that the oprofile daemon was
found by returning -1 on as the return for a bool function, oops, fix it,
found with Coccinelle (Peter Senna Tschudin).
- Fix per-pkg event reporting bug in 'perf stat' (Stephane Eranian)
Developer visible:
- Fix missing prototype for function provided when it isn't present in the
libelf present, fixing the build on RHEL/CentOS 5.1 systems, for instance
(Arnaldo Carvalho de Melo)
- Detect if the gcc and libnuma have the features needed to avoid requiring
the use of NO_LIBNUMA and/or NO_AUXTRACE to build on older systems
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k6ND
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible changes:
- When handling perf_event_open() returning EBUSY and not being able to opendir
the procfs mount point we would tell the user that the oprofile daemon was
found by returning -1 on as the return for a bool function, oops, fix it,
found with Coccinelle. (Peter Senna Tschudin).
- Fix per-pkg event reporting bug in 'perf stat'. (Stephane Eranian)
Developer visible changes:
- Fix missing prototype for function provided when it isn't present in the
libelf present, fixing the build on RHEL/CentOS 5.1 systems, for instance.
(Arnaldo Carvalho de Melo)
- Detect if the gcc and libnuma have the features needed to avoid requiring
the use of NO_LIBNUMA and/or NO_AUXTRACE to build on older systems.
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Returning a negative value for a boolean function seem to have the
undesired effect of returning true. Replace -1 by false in a
bool-returning function.
The diff of the .s file before and after the change (for x86_64):
3907c3907
< movl $1, %ebx
---
> xorl %ebx, %ebx
while if -1 is replaced by true, the diff is empty.
This issue was found by the following Coccinelle semantic patch:
<smpl>
@@
identifier f;
constant C;
typedef bool;
@@
bool f (...){
<+...
* return -C;
...+>
}
</smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1442484533-19742-1-git-send-email-peter.senna@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 fixes from Ingo Molnar:
- misc fixes all around the map
- block non-root vm86(old) if mmap_min_addr != 0
- two small debuggability improvements
- removal of obsolete paravirt op
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform: Fix Geode LX timekeeping in the generic x86 build
x86/apic: Serialize LVTT and TSC_DEADLINE writes
x86/ioapic: Force affinity setting in setup_ioapic_dest()
x86/paravirt: Remove the unused pv_time_ops::get_tsc_khz method
x86/ldt: Fix small LDT allocation for Xen
x86/vm86: Fix the misleading CONFIG_VM86 Kconfig help text
x86/cpu: Print family/model/stepping in hex
x86/vm86: Block non-root vm86(old) if mmap_min_addr != 0
x86/alternatives: Make optimize_nops() interrupt safe and synced
x86/mm/srat: Print non-volatile flag in SRAT
x86/cpufeatures: Enable cpuid for Intel SHA extensions
Pull perf fixes from Ingo MOlnar:
"Mostly tooling fixes, but also two x86 PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tests: Fix software clock events test setting maps
perf tests: Fix task exit test setting maps
perf evlist: Fix create_syswide_maps() not propagating maps
perf evlist: Fix add() not propagating maps
perf evlist: Factor out a function to propagate maps for a single evsel
perf evlist: Make create_maps() use set_maps()
perf evlist: Make set_maps() more resilient
perf evsel: Add own_cpus member
perf evlist: Fix missing thread_map__put in propagate_maps()
perf evlist: Fix splice_list_tail() not setting evlist
perf evlist: Add has_user_cpus member
perf evlist: Remove redundant validation from propagate_maps()
perf evlist: Simplify set_maps() logic
perf evlist: Simplify propagate_maps() logic
perf top: Fix segfault pressing -> with no hist entries
perf header: Fixup reading of HEADER_NRCPUS feature
perf/x86/intel: Fix constraint access
perf/x86/intel/bts: Set event->hw.itrace_started in pmu::start to match the new logic
perf tools: Fix use of wrong event when processing exit events
perf tools: Fix parse_events_add_pmu caller
The auxtrace code needed by Intel PT uses the __get_cpuid() gcc builtin,
that is not present in old systems, breaking the build.
Add a test to check for that builtin and disable AUXTRACE in those
systems.
[acme@rhel5 linux]$ make NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
<SNIP>
... lzma: [ on ]
... get_cpuid: [ OFF ]
<SNIP>
config/Makefile:630: Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc
MKDIR /tmp/build/perf/util/
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4puslul0jltoodzpx9r4sje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing numa test checks only if numa.h and numa_available() are
present, but that can be satisfied with an old libnuma that is not
enough for the 'perf bench numa' entry, so add a test to check for that:
[acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ on ]
<SNIP>
config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8
INSTALL binaries
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit f785f23576.
We have a test to check if elf_getphdrnum() is present, so, if it fails,
we'll get:
[acme@rhel5 linux]$ cat /tmp/build/perf/feature/test-libelf-getphdrnum.make.output
cc1: warnings being treated as errors
test-libelf-getphdrnum.c: In function ‘main’:
test-libelf-getphdrnum.c:7: warning: implicit declaration of function ‘elf_getphdrnum’
[acme@rhel5 linux]$
And this block will not be compiled:
#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT
static int elf_getphdrnum(Elf *elf, size_t *dst)
...
#endif
So, if elf_getphdrnum() is being defined somewhere, there is a problem
with the test that is not detecting that function, go fix it.
Reported-by: Vinson Lee <vlee@twopensource.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qn459fal6acvcvm50i8zxx9k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per-pkg events need to be captured once per processor socket. The code
in check_per_pkg() ensures only one value per processor package is used.
However there is a problem with this function in case the first CPU of
the package does not measure anything for the per-pkg event, but other
CPUs do.
Consider the following:
$ create cgroup FOO; echo $$ >FOO/tasks; taskset -c 1 noploop &
$ perf stat -a -I 1000 -e intel_cqm/llc_occupancy/ -G FOO sleep 100
1.00000 <not counted> Bytes intel_cqm/llc_occupancy/ FOO
The reason for this is that CPU0 in the cgroup has nothing running on it.
Yet check_per_plg() will mark socket0 as processed and no other event
value will be considered for the socket.
This patch fixes the problem by having check_per_pkg() only consider
events which actually ran.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441286620-10117-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test titled "Test software clock events have valid period values"
was setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test titled "Test number of exit event of a simple workload" was
setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix it by making it call perf_evlist__set_maps() instead of setting the
maps itself.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsels are added after maps are created, then they won't have any
maps propagated to them. Fix that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-12-git-send-email-adrian.hunter@intel.com
[ Moved the moving of propagate_maps() to the patch before, so that this
one does _just_ the one lile fix calling in add()]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent fixes will need a function that just propagates maps for a
single evsel so factor it out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-11-git-send-email-adrian.hunter@intel.com
[ Moved them to before perf_evlist__add() to avoid having to move it in the next patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since there is a function to set maps, perf_evlist__create_maps() should
use it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf_evlist__set_maps() more resilient by allowing for the
possibility that one or another of the maps isn't being changed and
therefore should not be "put".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() cannot easily tell if an evsel has its own
cpu map. To make that simpler, keep a copy of the PMU cpu map and
adjust the propagation logic accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() incorrectly assumes evsel->threads is NULL
before reassigning it, but it won't be NULL when perf_evlist__set_maps()
is used to set different (or NULL) maps. Thus thread_map__put must be
used, which works even if evsel->threads is NULL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d49e469507 ("perf evsel: Add a backpointer to the evlist a
evsel is in") updated perf_evlist__add() but not
perf_evlist__splice_list_tail().
This illustrates that it is better if perf_evlist__splice_list_tail()
calls perf_evlist__add() instead of duplicating the logic, so do that.
This will also simplify a subsequent fix for propagating maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent patches will need to call perf_evlist__propagate_maps without
reference to a "target". Add evlist->has_user_cpus to record whether
the user has specified which cpus to target (and therefore whether that
list of cpus should override the default settings for a selected event
i.e. the cpu maps should be propagated)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The validation checks that the values that were just assigned, got
assigned i.e. the error can't ever happen. Subsequent patches will call
this code in places where errors are not being returned. Changing those
code paths to return this non-existent error is counter-productive, so
just remove it.
That in turn results in perf_evlist__set_maps not needing to return an
error, but callers aren't checking it either, so remove that too.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't need to check for NULL when "putting" evlist->maps and
evlist->threads because the "put" functions already do that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsel->cpus is to be reassigned then the current value must be "put",
which works even if it is NULL. Simplify the current logic by moving
the "put" next to the assignment.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator. Since the function is
identical, try to reuse the code in arch/x86/kernel/ptrace.c.
Comment inside dwarf-regs.c list the differences between this
implementation and kernel code.
get_arch_regstr() switches to regoffset_table and the old string table
is dropped.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-20-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator.
PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET indicates an architecture
supports converting name of a register to its offset in 'struct
pt_regs'.
HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced as the corresponding
CFLAGS of PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-19-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Extracted from eBPF patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhancing parsing events tracepoint error output. Adding
more verbose output when the tracepoint is not found or
the tracing event path cannot be access.
$ sudo perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing//tracing/events/sched/sched_krava not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
...
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing//tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
Run 'perf list' for a list of valid events
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Propagate error info from tp_format via ERR_PTR to get it all the way
down to the parse-event.c tracepoint adding routines. Following
functions now return pointer with encoded error:
- tp_format
- trace_event__tp_format
- perf_evsel__newtp_idx
- perf_evsel__newtp
This affects several other places in perf, that cannot use pointer check
anymore, but must utilize the err.h interface, when getting error
information from above functions list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-5-git-send-email-jolsa@kernel.org
[ Add two missing ERR_PTR() and one IS_ERR() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass 'struct parse_events_error *error' to the parse-event.c tracepoint
adding path. It will be filled with error data in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding part of the kernel's <linux/err.h> interface:
inline void * __must_check ERR_PTR(long error);
inline long __must_check PTR_ERR(__force const void *ptr);
inline bool __must_check IS_ERR(__force const void *ptr);
It will be used to propagate error through pointers in following
patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The init/exit_symbols_maps() functions are to setup and cleanup
necessary info for probe events. But they need to be called from out of
the probe code now, so this patch exports them.
However the names are too generic, so change them to have 'probe'. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441852026-28974-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cleanup_perf_probe_events() frees all resources related to a perf
probe event. However it only freed resources in trace probe events, not
perf probe events. So call clear_perf_probe_event() too.
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441852026-28974-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the previous patch, the installation method change from install
to rsync. There is no need to create subdir during test, the
default EMIT_TESTS is enough.
This patch essentially revert commit 84cbd9e4 ("selftests/exec: do not
install subdir as it is already created").
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The command of install could not handle the special files in exec
testcases, change the default rule to rsync to fix this.
The installation is unchanged after this commit.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use make's implict rule for building simple C programs.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change from = to += in order to allows the user to pass whatever
CFLAGS they wish(E.g. pass the proper headers and librareis
(popt.h and libpopt.so) in cross-compiling)
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
renamed jump_label directory to static_keys and failed to update
the Makefile, causing the selftests build to fail.
This commit fixes it by updating the Makefile with the new name
and also moves the entry into the correct position to keep the
list alphabetically sorted.
Fixes: 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds support for s390 to the seccomp selftests. Some improvements
were made to enhance the accuracy of failure reporting, and additional
tests were added to validate assumptions about the currently traced
syscall. Also adds early asserts for running on older kernels to avoid
noise when the seccomp syscall is not implemented.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Not all shells define a variable UID. This is a bash and zsh feature only.
In other shells, the UID variable is not defined, so here test command
expands to [ != 0 ] which is a syntax error.
Without this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh zram.sh
zram.sh: 8: [: !=: unexpected operator
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
With this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh ./zram.sh
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
'perf top' segfaults with following operation:
# perf top -e page-faults -p 11400 # 11400 never generates page-fault
Then on the resulting empty interface, press right key:
# ./perf top -e page-faults -p 11400
perf: Segmentation fault
-------- backtrace --------
./perf[0x535428]
/lib64/libc.so.6(+0x3545f)[0x7f0dd360745f]
./perf[0x531d46]
./perf(perf_evlist__tui_browse_hists+0x96)[0x5340d6]
./perf[0x44ba2f]
/lib64/libpthread.so.0(+0x81d0)[0x7f0dd49dc1d0]
/lib64/libc.so.6(clone+0x6c)[0x7f0dd36b90dc]
The bug resides in perf_evsel__hists_browse() that, in the above
circumstance browser->selection can be NULL, but code after
skip_annotation doesn't consider it.
This patch fix it by checking browser->selection before fetching
browser->selection->map.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1442226235-117265-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test case for hists socket filter.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, users can zoom in/out for threads and dso in 'perf top' and
'perf report'.
This patch extends it for the processor sockets.
'S' is the short key to zoom into current Processor Socket.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-4-git-send-email-kan.liang@intel.com
[ - Made it elide the Socket column when zooming into it,
just like with the other zoom ops;
- Make it use browser->pstack, to unzoom level by level;
- Rename 'socket' variables to 'socket_id' to make it build on
older systems where it shadows a global glibc declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This information will come from perf.data files of from the current
system, cached when needed, such as when the 'socket' sort order gets
introduced.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441377946-44429-1-git-send-email-kan.liang@intel.com
[ Don't blindly use env->cpu[al.cpu].socket_id & use machine->env, fixes by Jiri & Arnaldo ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'struct machine' represents the machine where the samples were/are
being collected, and we also have a 'struct perf_env' with extra details
about such machine, that we were collecting at 'perf.data' creation time
but we also needed when no perf.data file is being used, such as in
'perf top'.
So, get those structs closer together, as they provide a bigger picture
of the sample's environment.
In 'perf session', when the file argument is NULL, we can assume that
the tool is sampling the running machine, so point machine->env to
the global put in place in previous patches, while set it to the
perf_header.env one when reading from a file.
This paves the way for machine->env to be used in
perf_event__preprocess_sample to populate addr_location.socket.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ajotl0khscutm68exictoy9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code to write the cpu topology map in the perf.data file
header.
Now if one needs the CPU topology map for the running machine, one needs
to call perf_env__read_cpu_topology_map(perf_env) and the info will be
stored in perf_env.cpu.
For now we're using a global perf_env variable, that will have its
contents freed after we run a builtin.
v2: Check perf_env__read_cpu_topology_map() return in
write_cpu_topology() (Kan Liang)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441828225-667-5-git-send-email-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have the tools/lib/ sysfs__read_int() for that, avoid code
duplication.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fqg6vt5ku72pbf54ljg6tmoy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
E.g.:
$ ./cpu__get_max_freq
3200000
It does that, as Kan's patch does, by looking at these files:
$ cat /sys/devices/system/cpu/online
0-3
$ ./sysfs__read_ull
devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq=3200000
$
I.e. find out the first online CPU, then read its cpufreq info.
But do it in tools/lib/api/, so that other tools/ living code can use
it, not just perf.
Based-on-a-patch-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-915v4cvxqplaub8qco66b9mv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To read either an int or an unsigned long long value from the given
file.
E.g.:
$ cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
3200000
$ ./sysfs__read_ull
devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq=3200000
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4a12m4d5k8m4qgc1vguocvei@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Get msr pmu type when processing pmu_mappings
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-3ngei63gepydwxhvytl2wx89@git.kernel.org
[ Fixed it up wrt moving perf_env from header.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding tools/include into tags directories, to have include definitions
reachable via tags/cscope.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have no use for it in evsel.h.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-um03yjrgyi3bj1hzqiqs4dsu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we were not setting it to at least 3 chars ('CPU'), it was being
reset to zero when recalculating the columns width when refreshing the
screen, in 'perf top'. Fix it.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iqcdnkkqm6sew06x01fbijmy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move this from two globals to perf_env global, that eventually will
be just perf_header->env or something else, to ease the refactoring
series, leave it as a global and go on reading more of its fields,
not as part of the header writing process but as a perf_env init one
that will be used for perf.data-less situations.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2j78tdf8zn1ci0y6ji15bifj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ce80d3bef9 ("perf tools: Rename perf_session_env to perf_env") we
forgot to rename a few functions to the "perf_env" prefix, do it now.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b3ui3z6ock89z1814pu2er98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it can be used separately from 'perf_session' and 'perf_header',
move it to separate include file and object, next csets will try to move
a perf_env__init() routine.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ff2rw99tsn670y1b6gxbwdsi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for introducing more arrays of tests, e.g. "arch tests"
(architecture-specific tests), abstract the code to iterate over the
list of tests into a helper function.
This way, code that uses a 'struct test' doesn't need to worry about how
the tests are grouped together and changes to the list of tests doesn't
require changes to the code using it.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1441479742-15402-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch test cpu core_id and socket_id which are stored in perf_env.
Commiter note:
# perf test topo
40: Test topology in session: Ok
# perf test -v topo
40: Test topology in session:
--- start ---
test child forked, pid 31767
templ file: /tmp/perf-test-VTZ1PL
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 0, socket 0
CPU 3, core 1, socket 0
test child finished with 0
---- end ----
Test topology in session: Ok
#
Based-on-a-patch-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441357111-64522-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using tracing_path interface on several places, that more or less
copy the functionality of tracing_path interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have all the functionality in fs.c, let's remove unneeded
objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-15-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switching to the fs.c related filesystem framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making tracing_path__strerror_open_tp message generic by mentioning both
debugfs/tracefs words in error message plus the tracing_path instead of
debugfs_mountpoint.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-7-git-send-email-jolsa@kernel.org
[ Add comment for the ENOENT case out of this patch discussion thread ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
objdump output can contain repeated bytes. At the moment test reads all
output sequentially, assuming each address is represented in output only
once:
ffffffff8164efb3 <retint_swapgs+0x9>:
ffffffff8164efb3: c1 5d 00 eb rcrl $0xeb,0x0(%rbp)
ffffffff8164efb7: 00 4c 8b 5c add %cl,0x5c(%rbx,%rcx,4)
ffffffff8164efb8 <restore_c_regs_and_iret>:
ffffffff8164efb8: 4c 8b 5c 24 30 mov 0x30(%rsp),%r11
ffffffff8164efbd: 4c 8b 54 24 38 mov 0x38(%rsp),%r10
Store objdump output to buffer according to offset calculated from
address on each line.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/ad13289a55d6350f7717757c7e32c2d4286402bd.1441181335.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the membarrier syscall self-test to match the membarrier
interface. Extend coverage of the interface. Consider ENOSYS as a
"SKIP" test, since it is a valid configuration, but does not allow
testing the system call.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a self test for the membarrier system call.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge second patch-bomb from Andrew Morton:
"Almost all of the rest of MM. There was an unusually large amount of
MM material this time"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
zpool: remove no-op module init/exit
mm: zbud: constify the zbud_ops
mm: zpool: constify the zpool_ops
mm: swap: zswap: maybe_preload & refactoring
zram: unify error reporting
zsmalloc: remove null check from destroy_handle_cache()
zsmalloc: do not take class lock in zs_shrinker_count()
zsmalloc: use class->pages_per_zspage
zsmalloc: consider ZS_ALMOST_FULL as migrate source
zsmalloc: partial page ordering within a fullness_list
zsmalloc: use shrinker to trigger auto-compaction
zsmalloc: account the number of compacted pages
zsmalloc/zram: introduce zs_pool_stats api
zsmalloc: cosmetic compaction code adjustments
zsmalloc: introduce zs_can_compact() function
zsmalloc: always keep per-class stats
zsmalloc: drop unused variable `nr_to_migrate'
mm/memblock.c: fix comment in __next_mem_range()
mm/page_alloc.c: fix type information of memoryless node
memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node()
...
This update adds new zram test and fixes to problems found
during testing this new zram test. In addition, there are
a few bug fixes and ksefltest improvement patches from Linaro
developers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV7wEDAAoJEAsCRMQNDUMcH1gQAJFAmc+C7f/8mIqkNjgIHc5g
/hY6F3Rz8pB6WMO5l9K2gDefhUbu+kHX7QB+hbL9KFRewKj3pmrKeiQa3jvBKaOf
gw2oH8ObL32ydghLgePAhw+Y66ELwybofbvh9bcY3ABEwj+y6VyMTceVPNJ+L+Rk
gfacNIPCwJXiJ/d9YncrVZyquULgapSNtJ0KIdYj3//PLbyyFX7MPXKyCiMc0uJW
2gKdFgs4edUsdY0yAj9bdk5x/wWTzgJKeGaJyANRri1fEaedcBdRvSbO3V0aUCv3
d4Lbc2IZ/7LDw7+tWcQmtfjwjqdkGhXqJdo5uihqtSRCPVigBZqfhemCNH2tQuc/
DihU+H3EXRvDXHyT2yyY+RLpSGpelGcnHMJmrXsjDDIpHFGa+6EH/iloZGZJcwDh
bOu9fSaBgeeOrxgtY8CPp4W0l8h58q9NwXqCe/ZzwAyteC02+cD48qwEnic7azuL
aw5V93F2ObvPyW/7FkqDIF/XHcvGV4mMTadwq6FZ38h7DnrvhBOEBf1zcskeCR/X
r+Nq/5nOFZs6Y88G/H0bk9tN7z3gsMCcLolrkRj5OLNVvyQb3IH8PuMdRUeMPDgL
gOYkq5/mZdXj/UfFRqVv18lzqCIYQxfmnlCxL243TvJFudzSev8X1PJZ2SiGOCYG
iMvYk4oTxyi9Ugw6hM8K
=dXt3
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This update adds new zram test and fixes to problems found during
testing this new zram test. In addition, there are a few bug fixes
and ksefltest improvement patches from Linaro developers.
I will send another update later on this week to fix kselftest
breakage due to commit 2bf9e0ab08 ("locking/static_keys: Provide a
selftest") after the fix soaks in next for a couple of days"
* tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/zram: Makefile fix
selftests/zram: must be run as root
selftests: breakpoints: fix installing error on the architecture except x86
selftests: check before install
selftests/zram: Adding zram tests
The hugetlb selftests provide minimal coverage. Have run script point
people at libhugetlbfs for better regression testing.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This manually reverts 7e50533d4b ("selftests: add hugetlbfstest").
The hugetlbfstest test depends on hugetlb pages being counted in a
task's rss. This functionality is not in the kernel, so the test will
always fail. Remove test to avoid confusion.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch sets bit 56 in pagemap if this page is mapped only once. It
allows to detect exclusively used pages without exposing PFN:
present file exclusive state
0 0 0 non-present
1 1 0 file page mapped somewhere else
1 1 1 file page mapped only here
1 0 0 anon non-CoWed page (shared with parent/child)
1 0 1 anon CoWed page (or never forked)
CoWed pages in (MAP_FILE | MAP_PRIVATE) areas are anon in this context.
MMap-exclusive bit doesn't reflect potential page-sharing via swapcache:
page could be mapped once but has several swap-ptes which point to it.
Application could detect that by swap bit in pagemap entry and touch that
pte via /proc/pid/mem to get real information.
See http://lkml.kernel.org/r/CAEVpBa+_RyACkhODZrRvQLs80iy0sqpdrd0AaP_-tgnX3Y9yNQ@mail.gmail.com
Requested by Mark Williamson.
[akpm@linux-foundation.org: fix spello]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Mark Williamson <mwilliamson@undo-software.com>
Tested-by: Mark Williamson <mwilliamson@undo-software.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes page-shift bits (scheduled to remove since 3.11) and
completes migration to the new bit layout. Also it cleans messy macro.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mark Williamson <mwilliamson@undo-software.com>
Tested-by: Mark Williamson <mwilliamson@undo-software.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On 32-bit:
userfaultfd.c: In function 'locking_thread':
userfaultfd.c:152: warning: left shift count >= width of type
userfaultfd.c: In function 'uffd_poll_thread':
userfaultfd.c:295: warning: cast to pointer from integer of different size
userfaultfd.c: In function 'uffd_read_thread':
userfaultfd.c:332: warning: cast to pointer from integer of different size
Fix the shift warning by splitting the shift in two parts, and the
integer/pointer warnigns by adding intermediate casts to "unsigned long".
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map. This facility is used by the pmem driver to
enable pfn_to_page() operations on the page frames returned by DAX
('direct_access' in 'struct block_device_operations'). For now, the
'memmap' allocation for these "device" pages comes from "System
RAM". Support for allocating the memmap from device memory will
arrive in a later kernel.
2/ Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3. Completion of
the conversion is targeted for v4.4.
3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
5/ Miscellaneous updates and fixes to libnvdimm including support
for issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV6Nx7AAoJEB7SkWpmfYgCWyYQAI5ju6Gvw27RNFtPovHcZUf5
JGnxXejI6/AqeTQ+IulgprxtEUCrXOHjCDA5dkjr1qvsoqK1qxug+vJHOZLgeW0R
OwDtmdW4Qrgeqm+CPoxETkorJ8wDOc8mol81kTiMgeV3UqbYeeHIiTAmwe7VzZ0C
nNdCRDm5g8dHCjTKcvK3rvozgyoNoWeBiHkPe76EbnxDICxCB5dak7XsVKNMIVFQ
NuYlnw6IYN7+rMHgpgpRux38NtIW8VlYPWTmHExejc2mlioWMNBG/bmtwLyJ6M3e
zliz4/cnonTMUaizZaVozyinTa65m7wcnpjK+vlyGV2deDZPJpDRvSOtB0lH30bR
1gy+qrKzuGKpaN6thOISxFLLjmEeYwzYd7SvC9n118r32qShz+opN9XX0WmWSFlA
sajE1ehm4M7s5pkMoa/dRnAyR8RUPu4RNINdQ/Z9jFfAOx+Q26rLdQXwf9+uqbEb
bIeSQwOteK5vYYCstvpAcHSMlJAglzIX5UfZBvtEIJN7rlb0VhmGWfxAnTu+ktG1
o9cqAt+J4146xHaFwj5duTsyKhWb8BL9+xqbKPNpXEp+PbLsrnE/+WkDLFD67jxz
dgIoK60mGnVXp+16I2uMqYYDgAyO5zUdmM4OygOMnZNa1mxesjbDJC6Wat1Wsndn
slsw6DkrWT60CRE42nbK
=o57/
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This update has successfully completed a 0day-kbuild run and has
appeared in a linux-next release. The changes outside of the typical
drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
the introduction of ZONE_DEVICE + devm_memremap_pages().
Summary:
- Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map.
This facility is used by the pmem driver to enable pfn_to_page()
operations on the page frames returned by DAX ('direct_access' in
'struct block_device_operations').
For now, the 'memmap' allocation for these "device" pages comes
from "System RAM". Support for allocating the memmap from device
memory will arrive in a later kernel.
- Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3.
Completion of the conversion is targeted for v4.4.
- Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
- Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
- Miscellaneous updates and fixes to libnvdimm including support for
issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes"
* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
libnvdimm, pmem: direct map legacy pmem by default
libnvdimm, pmem: 'struct page' for pmem
libnvdimm, pfn: 'struct page' provider infrastructure
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
add devm_memremap_pages
mm: ZONE_DEVICE for "device memory"
mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
dax: drop size parameter to ->direct_access()
nd_blk: change aperture mapping from WC to WB
nvdimm: change to use generic kvfree()
pmem, dax: have direct_access use __pmem annotation
dax: update I/O path to do proper PMEM flushing
pmem: add copy_from_iter_pmem() and clear_pmem()
pmem, x86: clean up conditional pmem includes
pmem: remove layer when calling arch_has_wmb_pmem()
pmem, x86: move x86 PMEM API to new pmem.h header
libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
pmem: switch to devm_ allocations
devres: add devm_memremap
libnvdimm, btt: write and validate parent_uuid
...
It changed as result of other syscalls, and while the system call list
itself was correctly updated, the selftest program was not.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
User visible:
- Use PERF_RECORD_SWITCH when available in intel-pt, instead of
"sched:sched_switch" events, enabling an unprivileged user to trace
multi-threaded or multi-process workloads (Adrian Hunter)
- Always use non inlined file name for 'srcfile' sort key (Andi Kleen)
- Quieten failed to read counter message, helps in systems without
backend-stalled-cycles (Andi Kleen)
Infrastructure:
- Add a 'perf test' entry for decoding of new x86 instructions (Adrian Hunter)
- Add new instructions (sha, clflushopt, clwb, pcommit, rdpkru, wrpkru, xsavec,
xsaves, xrstors) to the x86 instruction decoder (Adrian Hunter)
- Add a build test to warn when source code drifts happen for the
instruction decoder files in the kernel and in tools/perf (Adrian Hunter)
- Copy linux/filter.h to tools/include (He Kuang)
- Support function __get_dynamic_array_len in libtraceevent (He Kuanguuu)
- Tracing path finding/mounting/error reporting refactorings (Jiri Olsa)
- Store CPU socket and core IDs in perf.data (Kan Liang)
- Reorganize add/del probe insertion routines in 'perf probe' (Namhyung Kim, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uRtf
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Use PERF_RECORD_SWITCH when available in intel-pt, instead of
"sched:sched_switch" events, enabling an unprivileged user to trace
multi-threaded or multi-process workloads. (Adrian Hunter)
- Always use non inlined file name for 'srcfile' sort key. (Andi Kleen)
- Quieten failed to read counter message, helps in systems without
backend-stalled-cycles. (Andi Kleen)
Infrastructure changes:
- Add a 'perf test' entry for decoding of new x86 instructions. (Adrian Hunter)
- Add new instructions (sha, clflushopt, clwb, pcommit, rdpkru, wrpkru, xsavec,
xsaves, xrstors) to the x86 instruction decoder. (Adrian Hunter)
- Add a build test to warn when source code drifts happen for the
instruction decoder files in the kernel and in tools/perf. (Adrian Hunter)
- Copy linux/filter.h to tools/include. (He Kuang)
- Support function __get_dynamic_array_len in libtraceevent. (He Kuanguuu)
- Tracing path finding/mounting/error reporting refactorings. (Jiri Olsa)
- Store CPU socket and core IDs in perf.data. (Kan Liang)
- Reorganize add/del probe insertion routines in 'perf probe'. (Namhyung Kim, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
vm86 exposes an interesting attack surface against the entry
code. Since vm86 is mostly useless anyway if mmap_min_addr != 0,
just turn it off in that case.
There are some reports that vbetool can work despite setting
mmap_min_addr to zero. This shouldn't break that use case,
as CAP_SYS_RAWIO already overrides mmap_min_addr.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This test allocates two virtual areas and bounces the physical memory
across the two virtual areas using only userfaultfd.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test focuses on ambient capabilities. It requires either root or
the ability to create user namespaces. Some of the test cases will be
skipped for nonroot users.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com> # Original author
Cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Showing actual trace event when deleteing perf events is only needed in
perf probe command. But the add functionality itself can be used by
other places. So move the printing code into the cmd_probe().
The output is not changed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The del_perf_probe_events() does 2 things:
1. find existing events which match to filter
2. delete such trace events from kernel
But sometimes we need to do something with the trace events. So split
the funtion into two, so that it can access intermediate trace events
name using strlist if needed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Showing actual trace event when adding perf events is only needed in
perf probe command. But the add functionality itself can be used by
other places. So move the printing code into the cmd_probe().
Also it combines the output if more than one event is added.
Before:
$ sudo perf probe -a do_fork -a do_exit
Added new event:
probe:do_fork (on do_fork)
You can now use it in all perf tools, such as:
perf record -e probe:do_fork -aR sleep 1
Added new events:
probe:do_exit (on do_exit)
probe:do_exit_1 (on do_exit)
You can now use it in all perf tools, such as:
perf record -e probe:do_exit_1 -aR sleep 1
After:
$ sudo perf probe -a do_fork -a do_exit
Added new events:
probe:do_fork (on do_fork)
probe:do_exit (on do_exit)
probe:do_exit_1 (on do_exit)
You can now use it in all perf tools, such as:
perf record -e probe:do_exit_1 -aR sleep 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch drops struct __event_package structure. Instead, it adds a
'struct trace_probe_event' pointer to 'struct perf_probe_event'.
The trace_probe_event information gives further patches a chance to
access actual probe points and actual arguments.
Using them, 'perf probe' can get the whole list of added probes and
print them at once.
Other users like the upcoming bpf_loader will be able to attach one bpf
program to different probing points of an inline function (which has
multiple probing points) and glob functions.
Moreover, by reading the arguments information, bpf code for reading
those arguments can be generated.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-2-git-send-email-namhyung@kernel.org
[namhyung: extract necessary part from the existing patch]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The add_perf_probe_events() does 3 things:
1. convert all perf events to trace events
2. add all trace events to kernel
3. cleanup all trace events
But sometimes we need to do something with the trace events. So split
the funtion into three, so that it can access intermediate trace events
via struct __event_package if needed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for selecting and processing PERF_RECORD_SWITCH events for
use by Intel PT. If they are available, they will be used in preference
to sched_switch events.
This enables an unprivileged user to trace multi-threaded or
multi-process workloads with any level of perf_event_paranoid. However
it depends on kernel support for PERF_RECORD_SWITCH.
Without this patch, tracing a multi-threaded workload will decode
without error but all the data will be attributed to the main thread.
Without this patch, tracing a multi-process workload will result in
decoder errors because the decoder will not know which executable is
executing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439458857-30636-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need to check evsel before passing it to dump_sample().
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441283463-51050-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add xsavec, xsaves and xrstors to the op code map and the perf tools new
instructions test. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep 'xsave\|xrst'
For information about xsavec, xsaves and xrstors, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add rdpkru and wrpkru to the op code map and the perf tools new
instructions test. In the case of the test, only the bytes can be
tested at the moment since binutils doesn't support the instructions
yet. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep pkru
For information about rdpkru and wrpkru, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel Architecture Instruction Set Extensions Programing Reference (Oct
2014) describes 3 new memory instructions, namely clflushopt, clwb and
pcommit. Add them to the op code map and the perf tools new
instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins"
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel SHA Extensions are explained in the Intel Architecture
Instruction Set Extensions Programing Reference (Oct 2014).
There are 7 new instructions. Add them to the op code map
and the perf tools new instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep sha
Committer note:
3 lines of details, for the curious:
$ perf test -v "x86 ins" 2>&1 | grep sha256msg1 | tail -3
Decoded ok: 0f 38 cc 84 08 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,1),%xmm0
Decoded ok: 0f 38 cc 84 c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm0
Decoded ok: 44 0f 38 cc bc c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm15
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The MPX instructions are presently not described in the SDM
opcode maps, and there are not encoding characters for bnd
registers, address method or operand type. So the kernel
opcode map is using 'Gv' for bnd registers and 'Ev' for
everything else. That is fine because the instruction
decoder does not use that information anyway, except as
an indication that there is a ModR/M byte.
Nevertheless, in some cases the 'Gv' and 'Ev' are the wrong
way around, BNDLDX and BNDSTX have 2 operands not 3, and it
wouldn't hurt to identify the mandatory prefixes.
This has no effect on the decoding of valid instructions,
but the addition of the mandatory prefixes will cause some
invalid instructions to error out that wouldn't have
previously.
Note that perf tools has a copy of the instruction decoder
and provides a test for new instructions which includes MPX
instructions e.g.
$ perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ perf test -v "x86 ins"
Commiter notes:
And to see these MPX instructions specifically:
$ perf test -v "x86 ins" 2>&1 | grep bndldx | head -3
Decoded ok: 0f 1a 00 bndldx (%eax),%bnd0
Decoded ok: 0f 1a 05 78 56 34 12 bndldx 0x12345678,%bnd0
Decoded ok: 0f 1a 18 bndldx (%eax),%bnd3
$ perf test -v "x86 ins" 2>&1 | grep bndstx | head -3
Decoded ok: 0f 1b 00 bndstx %bnd0,(%eax)
Decoded ok: 0f 1b 05 78 56 34 12 bndstx %bnd0,0x12345678
Decoded ok: 0f 1b 18 bndstx %bnd3,(%eax)
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new test titled:
Test x86 instruction decoder - new instructions
The purpose of this test is to check the instruction decoder after new
instructions have been added. Initially, MPX instructions are tested
which are already supported, but the definitions in x86-opcode-map.txt
will be tweaked in a subsequent patch, after which this test can be run
to verify those changes.
The data for the test comes from assembly language instructions in
insn-x86-dat-src.c which is converted into bytes by the scripts
gen-insn-x86-dat.sh and gen-insn-x86-dat.awk, and included into the test
program insn-x86.c as insn-x86-dat-32.c and insn-x86-dat-64.c.
The conversion is not done as part of the perf tools build because the
test data must be under (git) change control in order for the test to be
repeatably-correct. Also it may require a recent version of binutils.
Commiter notes:
Using it:
# perf test decoder
39: Test x86 instruction decoder - new instructions : Ok
# perf test -v decoder
39: Test x86 instruction decoder - new instructions :
--- start ---
test child forked, pid 21970
Decoded ok: 0f 31 rdtsc
Decoded ok: f3 0f 1b 00 bndmk (%eax),%bnd0
Decoded ok: f3 0f 1b 05 78 56 34 12 bndmk 0x12345678,%bnd0
Decoded ok: f3 0f 1b 18 bndmk (%eax),%bnd3
<SNIP>
Decoded ok: f2 e9 00 00 00 00 bnd jmpq 402 <main+0x402>
Decoded ok: f2 e9 00 00 00 00 bnd jmpq 408 <main+0x408>
Decoded ok: 67 f2 ff 21 bnd jmpq *(%ecx)
Decoded ok: f2 0f 85 00 00 00 00 bnd jne 413 <main+0x413>
test child finished with 0
---- end ----
Test x86 instruction decoder - new instructions: Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools has a copy of the x86 instruction decoder used by the kernel.
The expectation is that the copy will be kept more-or-less in-synch with
the kernel version. Consequently it is helpful to know if there are
differences.
This patch adds a check into the perf tools build so that a diff is done
on the sources, and a warning is printed if they are different. Note
that the warning is not fatal and the build continues as normal.
The check is done as part of building the instruction decoder, so, like
a compiler warning, it is not seen unless the instruction decoder has to
be re-compiled. e.g.
$ make -C tools/perf >/dev/null
$ echo "/* blah */" >> tools/perf/util/intel-pt-decoder/inat_types.h
$ make -C tools/perf >/dev/null
Warning: Intel PT: x86 instruction decoder differs from kernel
$ make -C tools/perf >/dev/null
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add FSTYPE__configured() (where FSTYPE is one of sysfs, procfs, debugfs,
tracefs) interface that returns bool state of the filesystem mount:
true - mounted, false - not mounted
It will not try to mount the filesystem.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding FSTYPE__mount (where FSTYPE is, as of now, one of sysfs, procfs,
debugfs, tracefs) method that tries to mount the filesystem in case no
mount of FSTYPE is found.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding tracefs support into fs.c framework. It'll replace the tracefs
object functionality in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding debugfs support into fs.c framework. It'll replace the debugfs
object functionality in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to export SYSFS_MAGIC PROC_SUPER_MAGIC in fs.h. Leave
them in the fs.c.
Link: http://lkml.kernel.org/n/tip-b2cd1bb7yvbazq5oua24oz18@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're going to get rid of findfs.h in following patches, but we'll still
need these macros.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving debugfs__strerror_open out of api/fs/debugfs.c, because it's not
debugfs specific. It'll be changed to consider tracefs mount as well in
following patches.
Renaming it into tracing_path__strerror_open_tp to fit into the
namespace. No functional change is intended.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving tracing_path interface into api/fs/tracing_path.c out of util.c.
It seems generic enough to be used by others, and I couldn't think of
better place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt
- EEH fixes for SRIOV from Gavin
- Introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
- Use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras
- Seccomp filter support from Michael Ellerman
- opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar
- Add powerpc timebase as a trace clock source from Naveen N. Rao
- Misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
- Add an inline function to update POWER8 HID0 from Gautham R. Shenoy
- Fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
- Drop support for 64K local store on 4K kernels from Michael Ellerman
- move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan
- Initialize distance lookup table from drconf path from Nikunj A Dadhania
- Enable RTC class support from Vaibhav Jain
- Disable automatically blocked PCI config from Gavin Shan
- Add LEDs driver for PowerNV platform from Vasant Hegde
- Fix endianness issues in the HVSI driver from Laurent Dufour
- Kexec endian fixes from Samuel Mendoza-Jonas
- Fix corrupted pdn list from Gavin Shan
- Fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
- Freescale updates from Scott: Highlights include 32-bit memcpy/memset
optimizations, checksum optimizations, 85xx config fragments and updates,
device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor
fixes.
- A ton of cxl updates & fixes:
- Add explicit precision specifiers from Rasmus Villemoes
- use more common format specifier from Rasmus Villemoes
- Destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
- Destroy afu->contexts_idr on release of an afu from Johannes Thumshirn
- Compile with -Werror from Daniel Axtens
- EEH support from Daniel Axtens
- Plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
- Add alternate MMIO error handling from Ian Munsie
- Allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan
- Remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
- Release irqs if memory allocation fails from Vaibhav Jain
- Remove racy attempt to force EEH invocation in reset from Daniel Axtens
- Fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
- Fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie
- Set up and enable PSL Timebase from Philippe Bergheaud
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n9+X
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
from Benjamin Herrenschmidt
- EEH fixes for SRIOV from Gavin
- introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
- use hardware RNG for arch_get_random_seed_* not arch_get_random_*
from Paul Mackerras
- seccomp filter support from Michael Ellerman
- opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
Salgaonkar
- add powerpc timebase as a trace clock source from Naveen N. Rao
- misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
- add an inline function to update POWER8 HID0 from Gautham R. Shenoy
- fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
- drop support for 64K local store on 4K kernels from Michael Ellerman
- move dma_get_required_mask() from pnv_phb to pci_controller_ops from
Andrew Donnellan
- initialize distance lookup table from drconf path from Nikunj A
Dadhania
- enable RTC class support from Vaibhav Jain
- disable automatically blocked PCI config from Gavin Shan
- add LEDs driver for PowerNV platform from Vasant Hegde
- fix endianness issues in the HVSI driver from Laurent Dufour
- kexec endian fixes from Samuel Mendoza-Jonas
- fix corrupted pdn list from Gavin Shan
- fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
- Freescale updates from Scott: Highlights include 32-bit memcpy/memset
optimizations, checksum optimizations, 85xx config fragments and
updates, device tree updates, e6500 fixes for non-SMP, and misc
cleanup and minor fixes.
- a ton of cxl updates & fixes:
- add explicit precision specifiers from Rasmus Villemoes
- use more common format specifier from Rasmus Villemoes
- destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
- destroy afu->contexts_idr on release of an afu from Johannes
Thumshirn
- compile with -Werror from Daniel Axtens
- EEH support from Daniel Axtens
- plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
- add alternate MMIO error handling from Ian Munsie
- allow release of contexts which have been OPENED but not STARTED
from Andrew Donnellan
- remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
- release irqs if memory allocation fails from Vaibhav Jain
- remove racy attempt to force EEH invocation in reset from Daniel
Axtens
- fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
- fix force unmapping mmaps of contexts allocated through the kernel
api from Ian Munsie
- set up and enable PSL Timebase from Philippe Bergheaud
* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
cxl: Set up and enable PSL Timebase
cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
cxl: Fix + cleanup error paths in cxl_dev_context_init
powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
powerpc/pseries: Fix corrupted pdn list
powerpc/powernv: Enable LEDS support
powerpc/iommu: Set default DMA offset in dma_dev_setup
cxl: Remove racy attempt to force EEH invocation in reset
cxl: Release irqs if memory allocation fails
cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
powerpc/powernv: Reset HILE before kexec_sequence()
powerpc/kexec: Reset secondary cpu endianness before kexec
powerpc/hvsi: Fix endianness issues in the HVSI driver
leds/powernv: Add driver for PowerNV platform
powerpc/powernv: Create LED platform device
powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
powerpc/powernv: Fix the log message when disabling VF
cxl: Allow release of contexts which have been OPENED but not STARTED
...
Pull perf fixes from Ingo Molnar:
"Tooling fixes plus a handful of late arriving tooling changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix link time error with sample_reg_masks on non x86
perf build: Fix Intel PT instruction decoder dependency problem
perf dwarf: Fix potential array out of bounds access
perf record: Add ability to name registers to record
perf/x86: Add list of register names
perf script: Enable printing of interrupted machine state
perf evlist: Open event on evsel cpus and threads
bpf tools: New API to get name from a BPF object
perf tools: Fix build on powerpc broken by pt/bts
Pull locking and atomic updates from Ingo Molnar:
"Main changes in this cycle are:
- Extend atomic primitives with coherent logic op primitives
(atomic_{or,and,xor}()) and deprecate the old partial APIs
(atomic_{set,clear}_mask())
The old ops were incoherent with incompatible signatures across
architectures and with incomplete support. Now every architecture
supports the primitives consistently (by Peter Zijlstra)
- Generic support for 'relaxed atomics':
- _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
- atomic_read_acquire()
- atomic_set_release()
This came out of porting qwrlock code to arm64 (by Will Deacon)
- Clean up the fragile static_key APIs that were causing repeat bugs,
by introducing a new one:
DEFINE_STATIC_KEY_TRUE(name);
DEFINE_STATIC_KEY_FALSE(name);
which define a key of different types with an initial true/false
value.
Then allow:
static_branch_likely()
static_branch_unlikely()
to take a key of either type and emit the right instruction for the
case. To be able to know the 'type' of the static key we encode it
in the jump entry (by Peter Zijlstra)
- Static key self-tests (by Jason Baron)
- qrwlock optimizations (by Waiman Long)
- small futex enhancements (by Davidlohr Bueso)
- ... and misc other changes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
jump_label/x86: Work around asm build bug on older/backported GCCs
locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
locking/static_keys: Make verify_keys() static
jump label, locking/static_keys: Update docs
locking/static_keys: Provide a selftest
jump_label: Provide a self-test
s390/uaccess, locking/static_keys: employ static_branch_likely()
x86, tsc, locking/static_keys: Employ static_branch_likely()
locking/static_keys: Add selftest
locking/static_keys: Add a new static_key interface
locking/static_keys: Rework update logic
locking/static_keys: Add static_key_{en,dis}able() helpers
...
Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?
1) Add conntrack support to openvswitch, from Joe Stringer.
2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.
3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.
4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.
5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.
6) Document the DSA layer, from Florian Fainelli.
7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.
8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.
9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.
10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.
11) Support fragmented SKBs in iwlwifi, from Johannes Berg.
12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.
13) Add BQL support to 3c59x driver, from Loganaden Velvindron.
14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.
15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.
16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.
17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...
In a couple of cases the 'comm' member of 'union event' has been used
instead of the correct member ('fork') when processing exit events.
In the cases where it has been used incorrectly, only the 'pid' and
'tid' are affected. The 'pid' value would be correct anyway because it
is in the same position in 'comm' and 'fork' events, but the 'tid' would
have been incorrectly assigned from 'ppid'.
However, for exit events, the kernel puts the current task in the 'ppid'
and 'ttid' which is the same as the exiting task. That is 'ppid' ==
'pid' and if the task is not multi-threaded, 'pid' == 'tid' i.e. the
data goes wrong only when tracing multi-threaded programs.
It is hard to find an example of how this would produce an error in
practice. There are 3 occurences of the fix:
1. perf script is only affected if !sample_id_all which only happens on
old kernels.
2. intel_pt is only affected when decoding without timestamps
and would probably still decode correctly - the exit event is
only used to flush out data which anyway gets flushed at the
end of the session
3. intel_bts also uses the exit event to flush data which
would probably not cause errors as it would get flushed at
the end of the session instead
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439888825-27708-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming all functions touching tracing_path under same namespace. New
interface is:
char tracing_path[];
- tracing mount path
char tracing_events_path[];
- tracing mount/events path
void tracing_path_set(const char *mountpoint);
- setting directly tracing_path(_events), used by --debugfs-dir option
const char *tracing_path_mount(void);
- initial setup of tracing_(events)_path, called from perf.c
mounts debugfs/tracefs if needed and possible
char *get_tracing_file(const char *name);
void put_tracing_file(char *file);
- get/put tracing file path
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not used by any caller. We either detect the mountpoint or use
hardcoded one.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 3b3eb0445 running perf stat on a system without
backend-stalled-cycles spits out ugly warnings by default.
Since that is quite common, make the message a debug message only.
We know anyways that the counter wasn't read by the normal <unsupported>
output.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441147966-14917-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch stores the cpu socket_id and core_id in a perf.data header,
and reads them into the perf_env struct when processing perf.data files.
The changes modifies the CPU_TOPOLOGY section, making sure it is
backward/forward compatible.
The patch checks the section size before reading the core and socket ids.
It never reads data crossing the section boundary. An old perf binary
without this patch can also correctly read the perf.data from a new perf
with this patch.
Because the new info is added at the end of the cpu_topology section, an
old perf tool ignores the extra data.
Examples:
1. New perf with this patch read perf.data from an old perf without the
patch:
$ perf_new report -i perf_old.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# Core ID and Socket ID information is not available
# node0 meminfo : total = 32823872 kB, free = 29315548 kB
# node0 cpu list : 0-17,36-53
......
2. Old perf without the patch reads perf.data from a new perf with the
patch:
$ perf_old report -i perf_new.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# node0 meminfo : total = 32823872 kB, free = 29190932 kB
# node0 cpu list : 0-17,36-53
......
3. New perf read new perf.data:
$ perf_new report -i perf_new.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# CPU 0: Core ID 0, Socket ID 0
# CPU 1: Core ID 1, Socket ID 0
......
# CPU 61: Core ID 10, Socket ID 1
# CPU 62: Core ID 11, Socket ID 1
# CPU 63: Core ID 16, Socket ID 1
# node0 meminfo : total = 32823872 kB, free = 29190932 kB
# node0 cpu list : 0-17,36-53
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves the code which reads core_id and socket_id into
separate functions.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support helper function __get_dynamic_array_len() in libtraceevent, this
function is used accompany with __print_array() or __print_hex(), but
currently it is not an available function in the function list of
process_function().
The total allocated length of the dynamic array is embedded in the top
half of __data_loc_##item field. This patch adds new arg type
PRINT_DYNAMIC_ARRAY_LEN to return the length to eval_num_arg(),
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-32-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch copies filter.h from include/linux/kernel.h to
tools/include/linux/filter.h to enable other libraries to use macros in it,
like libbpf which will be introduced by further patches.
Currently, the filter.h copy only contains the useful macros needed by
libbpf for not introducing too much dependence.
tools/perf/MANIFEST is also updated for 'make perf-*-src-pkg'.
One change:
The 'imm' field of BPF_EMIT_CALL becomes ((FUNC) - BPF_FUNC_unspec) to
suit user space code generator.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-22-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[ Removed stylistic changes, so that a diff to the original file gets reduced ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When profiling the kernel with the 'srcfile' sort key it's common to
"get stuck" in include. For example a lot of code uses current or other
inlines, so they get accounted to some random include file. This is not
very useful as a high level categorization.
For example just profiling the idle loop usually shows mostly inlines,
so you never see the actual cpuidle file.
This patch changes the 'srcfile' sort key to always unwind the inline
stack using BFD/DWARF. So we always account to the base function that
called the inline.
In a few cases include is still shown (for example for MSR accesses),
but that is because they get inlining expanded as part of assigning to a
global function pointer. For the majority it works fine though.
v2: Use simpler while loop. Add maximum iteration count.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441133239-31254-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit changed parse_events_add_pmu interface:
36adec85a8 perf tools: Change parse_events_add_pmu interface
but forgot to change one caller. Because of lessen compilation rules for
the bison parser, the compiler did not warn on that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 36adec85a8 ("perf tools: Change parse_events_add_pmu interface")
Link: http://lkml.kernel.org/r/1441180605-24737-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore,
Lv Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to
AML method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool
to be built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future
introduction of CPPC support and ACPI PCC mailbox driver
updates (Ashwin Chaugule).
- ACPI interrupts enumeration fix for a regression related
to the handling of IRQ attribute conflicts between MADT
and the ACPI namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael
J Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups
(Pan Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it
to preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support
for them in the OPP framework and in the cpufreq-dt driver plus
related OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=fTgI
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"From the number of commits perspective, the biggest items are ACPICA
and cpufreq changes with the latter taking the lead (over 50 commits).
On the cpufreq front, there are many cleanups and minor fixes in the
core and governors, driver updates etc. We also have a new cpufreq
driver for Mediatek MT8173 chips.
ACPICA mostly updates its debug infrastructure and adds a number of
fixes and cleanups for a good measure.
The Operating Performance Points (OPP) framework is updated with new
DT bindings and support for them among other things.
We have a few updates of the generic power domains framework and a
reorganization of the ACPI device enumeration code and bus type
operations.
And a lot of fixes and cleanups all over.
Included is one branch from the MFD tree as it contains some
PM-related driver core and ACPI PM changes a few other commits are
based on.
Specifics:
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to AML
method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool to be
built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future introduction
of CPPC support and ACPI PCC mailbox driver updates (Ashwin
Chaugule).
- ACPI interrupts enumeration fix for a regression related to the
handling of IRQ attribute conflicts between MADT and the ACPI
namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael J
Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it to
preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support for
them in the OPP framework and in the cpufreq-dt driver plus related
OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu)"
* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
cpufreq: speedstep-lib: Use monotonic clock
cpufreq: powernv: Increase the verbosity of OCC console messages
cpufreq: sfi: use kmemdup rather than duplicating its implementation
cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
cpufreq: remove redundant 'policy' field from user_policy
cpufreq: remove redundant 'governor' field from user_policy
cpufreq: update user_policy.* on success
cpufreq: use memcpy() to copy policy
cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
cpufreq: mediatek: Add MT8173 cpufreq driver
dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
PM / Domains: Fix typo in description of genpd_dev_pm_detach()
PM / Domains: Remove unusable governor dummies
PM / Domains: Make pm_genpd_init() available to modules
PM / domains: Align column headers and data in pm_genpd_summary output
powercap / RAPL: disable the 2nd power limit properly
tools: cpupower: Fix error when running cpupower monitor
PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
PM / OPP: Fix static checker warning (broken 64bit big endian systems)
...
Pull x86 apic updates from Thomas Gleixner:
"This udpate contains:
- rework the irq vector array to store a pointer to the irq
descriptor instead of the irq number to avoid a lookup of the irq
descriptor in the irq entry path
- lguest interrupt handling cleanups
- conversion of the local apic timer to the new clockevent callbacks
- preparatory changes for the irq argument removal of interrupt flow
handlers"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Do not dereference irq descriptor before checking it
tools/lguest: Clean up include dir
tools/lguest: Fix redefinition of struct virtio_pci_cfg_cap
x86/irq: Store irq descriptor in vector array
genirq: Provide irq_desc_has_action
x86/irq: Get rid of an indentation level
x86/irq: Rename VECTOR_UNDEFINED to VECTOR_UNUSED
x86/irq: Replace numeric constant
x86/irq: Protect smp_cleanup_move
x86/lguest: Do not setup unused irq vectors
x86/lguest: Clean up lguest_setup_irq
x86/apic: Drop local_irq_save/restore in timer callbacks
x86/apic: Migrate apic timer to new set_state interface
x86/irq: Use access helper irq_data_get_affinity_mask()
x86/irq: Use accessor irq_data_get_irq_handler_data()
x86/irq: Use accessor irq_data_get_node()
Do not override run_tests, The default rule will just run TEST_PROGS
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adding new functionality check_prereqs() to check test must be run as root
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch makes perf compile on non x86 platforms by defining a weak
symbol for sample_reg_masks[] in util/perf_regs.c.
The patch also moves the REG() and REG_END() macros into the
util/per_regs.h header file. The macros are renamed to
SMPL_REG/SMPL_REG_END to avoid clashes with other header files.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441099814-26783-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I hit following building error randomly:
...
/bin/sh: /path/to/kernel/buildperf/util/intel-pt-decoder/inat-tables.c: No such file or directory
...
LINK /path/to/kernel/buildperf/plugin_mac80211.so
LINK /path/to/kernel/buildperf/plugin_kmem.so
LINK /path/to/kernel/buildperf/plugin_xen.so
LINK /path/to/kernel/buildperf/plugin_hrtimer.so
In file included from util/intel-pt-decoder/intel-pt-insn-decoder.c:25:0:
util/intel-pt-decoder/inat.c:24:25: fatal error: inat-tables.c: No such file or directory
#include "inat-tables.c"
^
compilation terminated.
make[4]: *** [/path/to/kernel/buildperf/util/intel-pt-decoder/intel-pt-insn-decoder.o] Error 1
make[4]: *** Waiting for unfinished jobs....
LINK /path/to/kernel/buildperf/plugin_function.so
This is caused by tools/perf/util/intel-pt-decoder/Build that, it tries
to generate $(OUTPUT)util/intel-pt-decoder/inat-tables.c atomatically
but forget to ensure the existance of $(OUTPUT)util/intel-pt-decoder
directory.
This patch fixes it by adding $(call rule_mkdir) like other similar rules.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441087005-107540-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 asm changes from Ingo Molnar:
"The biggest changes in this cycle were:
- Revamp, simplify (and in some cases fix) Time Stamp Counter (TSC)
primitives. (Andy Lutomirski)
- Add new, comprehensible entry and exit handlers written in C.
(Andy Lutomirski)
- vm86 mode cleanups and fixes. (Brian Gerst)
- 32-bit compat code cleanups. (Brian Gerst)
The amount of simplification in low level assembly code is already
palpable:
arch/x86/entry/entry_32.S | 130 +----
arch/x86/entry/entry_64.S | 197 ++-----
but more simplifications are planned.
There's also the usual laudry mix of low level changes - see the
changelog for details"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (83 commits)
x86/asm: Drop repeated macro of X86_EFLAGS_AC definition
x86/asm/msr: Make wrmsrl() a function
x86/asm/delay: Introduce an MWAITX-based delay with a configurable timer
x86/asm: Add MONITORX/MWAITX instruction support
x86/traps: Weaken context tracking entry assertions
x86/asm/tsc: Add rdtscll() merge helper
selftests/x86: Add syscall_nt selftest
selftests/x86: Disable sigreturn_64
x86/vdso: Emit a GNU hash
x86/entry: Remove do_notify_resume(), syscall_trace_leave(), and their TIF masks
x86/entry/32: Migrate to C exit path
x86/entry/32: Remove 32-bit syscall audit optimizations
x86/vm86: Rename vm86->v86flags and v86mask
x86/vm86: Rename vm86->vm86_info to user_vm86
x86/vm86: Clean up vm86.h includes
x86/vm86: Move the vm86 IRQ definitions to vm86.h
x86/vm86: Use the normal pt_regs area for vm86
x86/vm86: Eliminate 'struct kernel_vm86_struct'
x86/vm86: Move fields from 'struct kernel_vm86_struct' to 'struct vm86'
x86/vm86: Move vm86 fields out of 'thread_struct'
...
There is a problem in the dwarf-regs.c files for sh, sparc and x86 where
it is possible to make an out-of-bounds array access when searching for
register names.
This patch fixes it by replacing '<=' to '<', so when register (number
== XXX_MAX_REGS), get_arch_regstr() will return NULL.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@huawei.com
Link: http://lkml.kernel.org/r/1441078184-105038-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* pm-tools:
tools: cpupower: Fix error when running cpupower monitor
tools/power turbostat: fix typo on DRAM column in Joules-mode
cpupower: Do not change the frequency of offline cpu
tools/power turbostat: fix parameter passing for forked command
tools/power turbostat: dump CONFIG_TDP
tools/power turbostat: cpu0 is no longer hard-coded, so update output
tools/power turbostat: update turbostat(8)
* powercap:
powercap / RAPL: disable the 2nd power limit properly
powercap / RAPL: Add support for Broadwell-H
powercap / RAPL: Add support for Skylake H/S
User visible:
- Add ability to specify to select which registers to record,
to reduce the size of perf.data files, and also allow printing
the registers in 'perf script': (Stephane Eranian)
# perf record --intr-regs=AX,SP usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (8 samples) ]
# perf script -F ip,sym,iregs | tail -5
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff81761ac0 _raw_spin_lock AX:0xffff8801bfcf8020 SP:0xffff8802629c3ce8
ffffffff81202bf8 __vma_adjust_trans_huge AX:0x7ffc75200000 SP:0xffff8802629c3b30
ffffffff8122b089 dput AX:0x101 SP:0xffff8802629c3c78
#
Infrastructure:
- Open event on evsel cpus and threads (Kan Liang)
- New bpf API to get name from a BPF object (Wang Nan)
Build fixes:
- Fix build on powerpc broken by pt/bts (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=unM7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Add ability to specify to select which registers to record,
to reduce the size of perf.data files, and also allow printing
the registers in 'perf script': (Stephane Eranian)
# perf record --intr-regs=AX,SP usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (8 samples) ]
# perf script -F ip,sym,iregs | tail -5
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff81761ac0 _raw_spin_lock AX:0xffff8801bfcf8020 SP:0xffff8802629c3ce8
ffffffff81202bf8 __vma_adjust_trans_huge AX:0x7ffc75200000 SP:0xffff8802629c3b30
ffffffff8122b089 dput AX:0x101 SP:0xffff8802629c3c78
#
Infrastructure changes:
- Open event on evsel cpus and threads. (Kan Liang)
- Add new bpf API to get name from a BPF object. (Wang Nan)
Build fixes:
- Fix build on powerpc broken by pt/bts. (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf updates from Ingo Molnar:
"Main perf kernel side changes:
- uprobes updates/fixes. (Oleg Nesterov)
- Add PERF_RECORD_SWITCH to indicate context switches and use it in
tooling. (Adrian Hunter)
- Support BPF programs attached to uprobes and first steps for BPF
tooling support. (Wang Nan)
- x86 generic x86 MSR-to-perf PMU driver. (Andy Lutomirski)
- x86 Intel PT, LBR and BTS updates. (Alexander Shishkin)
- x86 Intel Skylake support. (Andi Kleen)
- x86 Intel Knights Landing (KNL) RAPL support. (Dasaratharaman
Chandramouli)
- x86 Intel Broadwell-DE uncore support. (Kan Liang)
- x86 hw breakpoints robustization (Andy Lutomirski)
Main perf tooling side changes:
- Support Intel PT in several tools, enabling the use of the
processor trace feature introduced in Intel Broadwell processors:
(Adrian Hunter)
# dmesg | grep Performance
# [0.188477] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
# perf record -e intel_pt//u -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.216 MB perf.data ]
# perf script # then navigate in the tool output to some area, like this one:
184 1030 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba661440 dl_main (/usr/lib64/ld-2.17.so)
185 1457 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba669f10 _dl_new_object (/usr/lib64/ld-2.17.so)
186 9f37 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba677b90 strlen (/usr/lib64/ld-2.17.so)
187 7ba3 strlen (/usr/lib64/ld-2.17.so) => 7f21ba677c75 strlen (/usr/lib64/ld-2.17.so)
188 7c78 strlen (/usr/lib64/ld-2.17.so) => 7f21ba669f3c _dl_new_object (/usr/lib64/ld-2.17.so)
189 9f8a _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba65fab0 calloc@plt (/usr/lib64/ld-2.17.so)
190 fab0 calloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e70 calloc (/usr/lib64/ld-2.17.so)
191 5e87 calloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa90 malloc@plt (/usr/lib64/ld-2.17.so)
192 fa90 malloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e60 malloc (/usr/lib64/ld-2.17.so)
193 5e68 malloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so)
194 fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so) => 7f21ba675d50 __libc_memalign (/usr/lib64/ld-2.17.so)
195 5d63 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e20 __libc_memalign (/usr/lib64/ld-2.17.so)
196 5e40 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675d73 __libc_memalign (/usr/lib64/ld-2.17.so)
197 5d97 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e18 __libc_memalign (/usr/lib64/ld-2.17.so)
198 5e1e __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675df9 __libc_memalign (/usr/lib64/ld-2.17.so)
199 5e10 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba669f8f _dl_new_object (/usr/lib64/ld-2.17.so)
200 9fc2 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba678e70 memcpy (/usr/lib64/ld-2.17.so)
201 8e8c memcpy (/usr/lib64/ld-2.17.so) => 7f21ba678ea0 memcpy (/usr/lib64/ld-2.17.so)
- Add support for using several Intel PT features (CYC, MTC packets),
the relevant documentation was updated in:
tools/perf/Documentation/intel-pt.txt
briefly describing those packets, its purposes, how to configure
them in the event config terms and relevant external documentation
for further reading. (Adrian Hunter)
- Introduce support for probing at an absolute address, for user and
kernel 'perf probe's, useful when one have the symbol maps on a
developer machine but not on an embedded system. (Wang Nan)
- Add Intel BTS support, with a call-graph script to show it and PT
in use in a GUI using 'perf script' python scripting with
postgresql and Qt. (Adrian Hunter)
- Allow selecting the type of callchains per event, including
disabling callchains in all but one entry in an event list, to save
space, and also to ask for the callchains collected in one event to
be used in other events. (Kan Liang)
- Beautify more syscall arguments in 'perf trace': (Arnaldo Carvalho
de Melo)
* A bunch more translate file/pathnames from pointers to strings.
* Convert numbers to strings for the 'keyctl' syscall 'option'
arg.
* Add missing 'clockid' entries.
- Introduce 'srcfile' sort key: (Andi Kleen)
# perf record -F 10000 usleep 1
# perf report --stdio --dsos '[kernel.vmlinux]' -s srcfile
<SNIP>
# Overhead Source File
26.49% copy_page_64.S
5.49% signal.c
0.51% msr.h
#
It can be combined with other fields, for instance, experiment with
'-s srcfile,symbol'.
There are some oddities in some distros and with some specific
DSOs, being investigated, so your mileage may vary.
- Support per-event 'freq' term: (Namhyung Kim)
$ perf record -e 'cpu/instructions,freq=1234/',cycles -c 1000 sleep 1
$ perf evlist -F
cpu/instructions,freq=1234/: sample_freq=1234
cycles: sample_period=1000
$
- Deref sys_enter pointer args with contents from probe:vfs_getname,
showing pathnames instead of pointers in many syscalls in 'perf
trace'. (Arnaldo Carvalho de Melo)
- Stop collecting /proc/kallsyms in perf.data files, saving about
4.5MB on a typical x86-64 system, use the the symbol resolution
routines used in all the other tools (report, top, etc) now that we
can ask libtraceevent to use perf's symbol resolution code.
(Arnaldo Carvalho de Melo)
- Allow filtering out of perf's PID via 'perf record --exclude-perf'.
(Wang Nan)
- 'perf trace' now supports syscall groups, like strace, i.e:
$ trace -e file touch file
Will expand 'file' into multiple, file related, syscalls. More
work needed to add extra groups for other syscall groups, and also
to complement what was added for the 'file' group, included as a
proof of concept. (Arnaldo Carvalho de Melo)
- Add lock_pi stresser to 'perf bench futex', to test the kernel code
related to FUTEX_(UN)LOCK_PI. (Davidlohr Bueso)
- Let user have timestamps with per-thread recording in 'perf record'
(Adrian Hunter)
- ... and tons of other changes, see the shortlog and the Git log for
details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (240 commits)
perf evlist: Add backpointer for perf_env to evlist
perf tools: Rename perf_session_env to perf_env
perf tools: Do not change lib/api/fs/debugfs directly
perf tools: Add tracing_path and remove unneeded functions
perf buildid: Introduce sysfs/filename__sprintf_build_id
perf evsel: Add a backpointer to the evlist a evsel is in
perf trace: Add header with copyright and background info
perf scripts python: Add new compaction-times script
perf stat: Get correct cpu id for print_aggr
tools lib traceeveent: Allow for negative numbers in print format
perf script: Add --[no-]-demangle/--[no-]-demangle-kernel
tracing/uprobes: Do not print '0x (null)' when offset is 0
perf probe: Support probing at absolute address
perf probe: Fix error reported when offset without function
perf probe: Fix list result when address is zero
perf probe: Fix list result when symbol can't be found
tools build: Allow duplicate objects in the object list
perf tools: Remove export.h from MANIFEST
perf probe: Prevent segfault when reading probe point with absolute address
perf tools: Update Intel PT documentation
...
Pull liblockdep fixes from Ingo Molnar:
"Three liblockdep fixes left over from the v4.2 cycle"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: Use the rbtree header provided by common tools headers
tools/liblockdep: Correct macro for WARN
tools: Restore export.h
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- the combination of tree geometry-initialization simplifications and
OS-jitter-reduction changes to expedited grace periods. These two
are stacked due to the large number of conflicts that would
otherwise result.
- privatize smp_mb__after_unlock_lock().
This commit moves the definition of smp_mb__after_unlock_lock() to
kernel/rcu/tree.h, in recognition of the fact that RCU is the only
thing using this, that nothing else is likely to use it, and that
it is likely to go away completely.
- documentation updates.
- torture-test updates.
- misc fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcu,locking: Privatize smp_mb__after_unlock_lock()
rcu: Silence lockdep false positive for expedited grace periods
rcu: Don't disable CPU hotplug during OOM notifiers
scripts: Make checkpatch.pl warn on expedited RCU grace periods
rcu: Update MAINTAINERS entry
rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
rcu: Make rcu_is_watching() really notrace
cpu: Wait for RCU grace periods concurrently
rcu: Create a synchronize_rcu_mult()
rcu: Fix obsolete priority-boosting comment
rcu: Use WRITE_ONCE in RCU_INIT_POINTER
rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
rcu: Add RCU-sched flavors of get-state and cond-sync
rcu: Add fastpath bypassing funnel locking
rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
rcu: Pull out wait_event*() condition into helper function
documentation: Describe new expedited stall warnings
rcu: Add stall warnings to synchronize_sched_expedited()
...
This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.
The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.
With no parameter, the --intr-regs still records all possible registers
based on the architecture.
To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:
$ perf record --intr-regs=si,di,r8,r9 .....
To record any possible registers:
$ perf record -I .....
$ perf report --intr-regs ...
To display the register, one can use perf report -D
To list the available registers:
$ perf record --intr-regs=\?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a way to locate a register identifier (PERF_X86_REG_*)
based on its name, e.g., AX.
This will be used by a subsequent patch to improved flexibility of perf
record.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the output of the interrupted machine state (iregs) to
perf script. It presents them as NAME:VALUE so this is easy to parse
during post processing.
To capture the interrupted machine state:
$ perf record -I ....
to display iregs, use the -F option:
$ perf script -F ip,iregs
40afc2 AX:0x6c5770 BX:0x1e CX:0x5f4d80a DX:0x101010101010101 SI:0x1
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An evsel may have different cpus and threads than the evlist it is in.
Use it's own cpus and threads, when opening the evsel in 'perf record'.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440138194-17001-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch there's no way to connect a loaded bpf object
to its source file. However, during applying perf's '--filter' to BPF
object, without this connection makes things harder, because perf loads
all programs together, but '--filter' setting is for each object.
The API of bpf_object__open_buffer() is changed to allow passing a name.
Fortunately, at this time there's only one user of it (perf test LLVM),
so we change it together.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440742821-44548-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is theoretically possible to process perf.data files created on x86
and that contain Intel PT or Intel BTS data, on any other architecture,
which is why it is possible for there to be build errors on powerpc
caused by pt/bts.
The errors were:
util/intel-pt-decoder/intel-pt-insn-decoder.c: In function ‘intel_pt_insn_decoder’:
util/intel-pt-decoder/intel-pt-insn-decoder.c:138:3: error: switch missing default case [-Werror=switch-default]
switch (insn->immediate.nbytes) {
^
cc1: all warnings being treated as errors
linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_synth_branch_sample':
sources/linux-acme.git/tools/perf/util/intel-pt.c:871: undefined reference to `tsc_to_perf_time'
linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_sample':
sources/linux-acme.git/tools/perf/util/intel-pt.c:915: undefined reference to `tsc_to_perf_time'
sources/linux-acme.git/tools/perf/util/intel-pt.c:962: undefined reference to `tsc_to_perf_time'
linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_process_event':
sources/linux-acme.git/tools/perf/util/intel-pt.c:1454: undefined reference to `perf_time_to_tsc'
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441046384-28663-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Here is the big staging driver updates for 4.3-rc1.
Lots of things all over the place, almost all of them trivial fixups and
changes. The usual IIO updates and new drivers and we have added the
MOST driver subsystem which is getting cleaned up in the tree. The
ozwpan driver is finally being deleted as it is obviously abandoned and
no one cares about it.
Full details are in the shortlog, and all of these have been in
linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlXV9S8ACgkQMUfUDdst+ykAwQCfSOc+y5AG7+63cIdnLwRS3MdZ
p3EAoLoJXl8+5hfIsRBlwXyLEkN33f/7
=dD9z
-----END PGP SIGNATURE-----
Merge tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big staging driver updates for 4.3-rc1.
Lots of things all over the place, almost all of them trivial fixups
and changes. The usual IIO updates and new drivers and we have added
the MOST driver subsystem which is getting cleaned up in the tree.
The ozwpan driver is finally being deleted as it is obviously
abandoned and no one cares about it.
Full details are in the shortlog, and all of these have been in
linux-next with no reported issues"
* tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (912 commits)
staging/lustre/o2iblnd: remove references to ib_reg_phsy_mr()
staging: wilc1000: fix build warning with setup_timer()
staging: wilc1000: remove DECLARE_WILC_BUFFER()
staging: wilc1000: remove void function return statements that are not useful
staging: wilc1000: coreconfigurator.c: fix kmalloc error check
staging: wilc1000: coreconfigurator.c: use kmalloc instead of WILC_MALLOC
staging: wilc1000: remove unused codes of gps8ConfigPacket
staging: wilc1000: remove unnecessary void pointer cast
staging: wilc1000: remove WILC_NEW and WILC_NEW_EX
staging: wilc1000: use kmalloc instead of WILC_NEW
staging: wilc1000: Process WARN, INFO options of debug levels from user
staging: wilc1000: remove unneeded tstrWILC_MsgQueueAttrs typedef
staging: wilc1000: delete wilc_osconfig.h
staging: wilc1000: delete wilc_log.h
staging: wilc1000: delete wilc_timer.h
staging: wilc1000: remove WILC_TimerStart()
staging: wilc1000: remove WILC_TimerCreate()
staging: wilc1000: remove WILC_TimerDestroy()
staging: wilc1000: remove WILC_TimerStop()
staging: wilc1000: remove tstrWILC_TimerAttrs typedef
...
Here is the new patches for the driver core / sysfs for 4.3-rc1.
Very small number of changes here, all the details are in the shortlog,
nothing major happening at all this kernel release, which is nice to
see.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlXV9EwACgkQMUfUDdst+ylv1ACgj7srYyvumehX1zfRVzEWNuez
chQAoKHnSpDMME/WmhQQRxzQ5pfd1Pni
=uGHg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the new patches for the driver core / sysfs for 4.3-rc1.
Very small number of changes here, all the details are in the
shortlog, nothing major happening at all this kernel release, which is
nice to see"
* tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
bus: subsys: update return type of ->remove_dev() to void
driver core: correct device's shutdown order
driver core: fix docbook for device_private.device
selftests: firmware: skip timeout checks for kernels without user mode helper
kernel, cpu: Remove bogus __ref annotations
cpu: Remove bogus __ref annotation of cpu_subsys_online()
firmware: fix wrong memory deallocation in fw_add_devm_name()
sysfs.txt: update show method notes about sprintf/snprintf/scnprintf usage
devres: fix devres_get()
Here's the "big" char/misc driver update for 4.3-rc1.
Not much really interesting here, just a number of little changes all
over the place, and some nice consolidation of the nvmem drivers to a
common framework. As usual, the mei drivers stand out as the largest
"churn" to handle new devices and features in their hardware.
All have been in linux-next for a while with no issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlXV844ACgkQMUfUDdst+ymYfQCgmDKjq3fsVHCxNZPxnukFYzvb
xZkAnRb8fuub5gVQFP29A+rhyiuWD13v
=Bq9K
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver patches from Greg KH:
"Here's the "big" char/misc driver update for 4.3-rc1.
Not much really interesting here, just a number of little changes all
over the place, and some nice consolidation of the nvmem drivers to a
common framework. As usual, the mei drivers stand out as the largest
"churn" to handle new devices and features in their hardware.
All have been in linux-next for a while with no issues"
* tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
auxdisplay: ks0108: initialize local parport variable
extcon: palmas: Fix build break due to devm_gpiod_get_optional API change
extcon: palmas: Support GPIO based USB ID detection
extcon: Fix signedness bugs about break error handling
extcon: Drop owner assignment from i2c_driver
extcon: arizona: Simplify pdata symantics for micd_dbtime
extcon: arizona: Declare 3-pole jack if we detect open circuit on mic
extcon: Add exception handling to prevent the NULL pointer access
extcon: arizona: Ensure variables are set for headphone detection
extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio
extcon: arizona: Add basic microphone detection DT/ACPI bindings
extcon: arizona: Update to use the new device properties API
extcon: palmas: Remove the mutually_exclusive array
extcon: Remove optional print_state() function pointer of struct extcon_dev
extcon: Remove duplicate header file in extcon.h
extcon: max77843: Clear IRQ bits state before request IRQ
toshiba laptop: replace ioremap_cache with ioremap
misc: eeprom: max6875: clean up max6875_read()
misc: eeprom: clean up eeprom_read()
misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write
...
User visible:
- Add new compaction-times python script (Tony Jones)
- Make the --[no-]-demangle/--[no-]-demangle-kernel command line
options available in 'perf script' too (Mark Drayton)
- Allow for negative numbers in libtraceevent's print format,
fixing up misformatting in some tracepoints (Steven Rostedt)
Infrastructure:
- perf_env/perf_evlist changes to allow accessing the data
structure with the environment where some perf data was
collected in functions not necessarily related to perf.data
file processing (Kan Liang)
- Cleanups for the tracepoint definition location paths routines (Jiri Olsa)
- Introduce sysfs/filename__sprintf_build_id, removing code
duplication (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9AFe
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvement and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Add new compaction-times python script. (Tony Jones)
- Make the --[no-]-demangle/--[no-]-demangle-kernel command line
options available in 'perf script' too. (Mark Drayton)
- Allow for negative numbers in libtraceevent's print format,
fixing up misformatting in some tracepoints. (Steven Rostedt)
Infrastructure changes:
- perf_env/perf_evlist changes to allow accessing the data
structure with the environment where some perf data was
collected in functions not necessarily related to perf.data
file processing. (Kan Liang)
- Cleanups for the tracepoint definition location paths routines. (Jiri Olsa)
- Introduce sysfs/filename__sprintf_build_id, removing code
duplication. (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enable the pmem driver to handle PFN device instances. Attaching a pmem
namespace to a pfn device triggers the driver to allocate and initialize
struct page entries for pmem. Memory capacity for this allocation comes
exclusively from RAM for now which is suitable for low PMEM to RAM
ratios. This mechanism will be expanded later for setting an "allocate
from PMEM" policy.
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Implement the base infrastructure for libnvdimm PFN devices. Similar to
BTT devices they take a namespace as a backing device and layer
functionality on top. In this case the functionality is reserving space
for an array of 'struct page' entries to be handed out through
pfn_to_page(). For now this is just the basic libnvdimm-device-model for
configuring the base PFN device.
As the namespace claiming mechanism for PFN devices is mostly identical
to BTT devices drivers/nvdimm/claim.c is created to house the common
bits.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
get_cpu_topology() tries to get topology info from all cpus by reading
files in the topology sysfs dir. If a cpu is offlined, since it doesn't
have topology dir, this function fails and returns -1. This causes
functions relying on get_cpu_topology() to fail. For example-
$ cpupower monitor
Cannot read number of available processors
Fix this by skipping fetching topology info for offline cpus.
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add backpointer to perf_env in evlist, so we can easily access env when
processing something where we have a evsel or evlist.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is not necessarily tied to a perf.data file and needs using in
places where a perf_session is not required.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracing_events_path is the variable we want to change via
--debugfs-dir option, not the debugfs_mountpoint.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1440596813-12844-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for find_tracing_dir, because perf already searches for
debugfs/tracefs mount on start and populate tracing_events_path.
Adding tracing_path to carry tracing dir string to be used in
get_tracing_file instead of calling find_tracing_dir.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1440596813-12844-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that functions that deal primarily with an evsel to access
information that concerns the whole evlist it is in.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440677263-21954-5-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch creates a new script (compaction-times) to report time
spent in mm compaction. It is possible to report times in nanoseconds
(default) or microseconds (-u).
The option -p will break down results by process id, -pv will further
decompose by each compaction entry/exit.
For each compaction entry/exit what is reported is controlled by the
options:
-t report only timing
-m report migration stats
-ms report migration scanner stats
-fs report free scanner stats
The default is to report all.
Entries may be further filtered by pid, pid-range or comm (regex).
The script is useful when analysing workloads that compact memory. The
most common example will be THP allocations on systems with a lot of
uptime that has fragmented memory.
This is an example of using the script to analyse a thpscale from
mmtests which deliberately fragments memory and allocates THP in 4
separate threads
# Recording step, one of the following;
$ perf record -e 'compaction:mm_compaction_*' ./workload
# or:
$ perf script record compaction-times
# Reporting: basic
total: 2444505743ns migration: moved=357738 failed=39275
free_scanner: scanned=2705578 isolated=387875
migration_scanner: scanned=414426 isolated=397013
# Reporting: Per task stall times
$ perf script report compaction-times -- -t -p
total: 2444505743ns
6384[thpscale]: 740800017ns
6385[thpscale]: 274119512ns
6386[thpscale]: 832961337ns
6383[thpscale]: 596624877ns
# Reporting: Per-compaction attempts for task 6385
$ perf script report compaction-times -- -m -pv 6385
total: 274119512ns migration: moved=14893 failed=24285
6385[thpscale]: 274119512ns migration: moved=14893 failed=24285
6385[thpscale].1: 3033277ns migration: moved=511 failed=1
6385[thpscale].2: 9592094ns migration: moved=1524 failed=12
6385[thpscale].3: 2495587ns migration: moved=512 failed=0
6385[thpscale].4: 2561766ns migration: moved=512 failed=0
6385[thpscale].5: 2523521ns migration: moved=512 failed=0
..... output continues ...
Changes since v1:
- report stats for isolate_migratepages and isolate_freepages
(Vlastimil Babka)
- refactor code to achieve above
- add help text
- output to stdout/stderr explicitly
Signed-off-by: Tony Jones <tonyj@suse.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1439840932-8933-1-git-send-email-tonyj@suse.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
print_aggr() fails to print per-core/per-socket statistics after commit
582ec0829b ("perf stat: Fix per-socket output bug for uncore events")
if events have differnt cpus. Because in print_aggr(), aggr_get_id needs
index (not cpu id) to find core/pkg id. Also, evsel cpu maps should be
used to get aggregated id.
Here is an example:
Counting events cycles,uncore_imc_0/cas_count_read/. (Uncore event has
cpumask 0,18)
$ perf stat -e cycles,uncore_imc_0/cas_count_read/ -C0,18 --per-core sleep 2
Without this patch, it failes to get CPU 18 result.
Performance counter stats for 'CPU(s) 0,18':
S0-C0 1 7526851 cycles
S0-C0 1 1.05 MiB uncore_imc_0/cas_count_read/
S1-C0 0 <not counted> cycles
S1-C0 0 <not counted> MiB uncore_imc_0/cas_count_read/
With this patch, it can get both CPU0 and CPU18 result.
Performance counter stats for 'CPU(s) 0,18':
S0-C0 1 6327768 cycles
S0-C0 1 0.47 MiB uncore_imc_0/cas_count_read/
S1-C0 1 330228 cycles
S1-C0 1 0.29 MiB uncore_imc_0/cas_count_read/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 582ec0829b ("perf stat: Fix per-socket output bug for uncore events")
Link: http://lkml.kernel.org/r/1435820925-51091-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was reported that "%-8s" does not parse well when used in the printk
format. The '-' is what is throwing it off. Allow that to be included.
Reporter note:
Example before:
transhuge-stres-10730 [004] 5897.713989: mm_compaction_finished: node=0
zone=>-<8s order=-2119871790 ret=
Example after:
transhuge-stres-4235 [000] 453.149280: mm_compaction_finished: node=0
zone=ffffffff81815d7a order=9 ret=
(I will send patches to fix the string handling in the tracepoints so
it's on par with in-kernel printing via trace_pipe:)
transhuge-stres-10921 [007] ...1 6307.140205: mm_compaction_finished: node=0
zone=Normal order=9 ret=partial
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150827094601.46518bcc@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes when post-processing output from `perf script` one does not
want to demangle C++ symbol names. Add an option to allow this.
Also add --[no-]demangle-kernel to be consistent with top/report/probe.
Signed-off-by: Mark Drayton <mbd@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440616695-32340-1-git-send-email-scientist@fb.com
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should result in a pretty sizeable performance gain for reads. For
rough comparison I did some simple read testing using PMEM to compare
reads of write combining (WC) mappings vs write-back (WB). This was
done on a random lab machine.
PMEM reads from a write combining mapping:
# dd of=/dev/null if=/dev/pmem0 bs=4096 count=100000
100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 9.2855 s, 44.1 MB/s
PMEM reads from a write-back mapping:
# dd of=/dev/null if=/dev/pmem0 bs=4096 count=1000000
1000000+0 records in
1000000+0 records out
4096000000 bytes (4.1 GB) copied, 3.44034 s, 1.2 GB/s
To be able to safely support a write-back aperture I needed to add
support for the "read flush" _DSM flag, as outlined in the DSM spec:
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
This flag tells the ND BLK driver that it needs to flush the cache lines
associated with the aperture after the aperture is moved but before any
new data is read. This ensures that any stale cache lines from the
previous contents of the aperture will be discarded from the processor
cache, and the new data will be read properly from the DIMM. We know
that the cache lines are clean and will be discarded without any
writeback because either a) the previous aperture operation was a read,
and we never modified the contents of the aperture, or b) the previous
aperture operation was a write and we must have written back the dirtied
contents of the aperture to the DIMM before the I/O was completed.
In order to add support for the "read flush" flag I needed to add a
generic routine to invalidate cache lines, mmio_flush_range(). This is
protected by the ARCH_HAS_MMIO_FLUSH Kconfig variable, and is currently
only supported on x86.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When the test cases is not supported by the current architecture
the install files(TEST_PROGS, TEST_PROGS_EXTENDED and TEST_FILES)
will be empty. Check it before installation to dismiss a failure
reported by install program.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
zram: Compressed RAM based block devices
----------------------------------------
The zram module creates RAM based block devices named /dev/zram<id>
(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
in memory itself. These disks allow very fast I/O and compression provides
good amounts of memory savings. Some of the usecases include /tmp storage,
use as swap disks, various caches under /var and maybe many more :)
Statistics for individual zram devices are exported through sysfs nodes at
/sys/block/zram<id>/
This patch is to validate the zram functionality. Test interacts with block
device /dev/zram<id> and sysfs nodes /sys/block/zram<id>/
zram.sh: sanity check of CONFIG_ZRAM and to run zram01 and zram02 tests
zram01.sh: creates general purpose ram disks with different filesystems
zram02.sh: creates block device for swap
zram_lib.sh: create library with initialization/cleanup functions
README: ZRAM introduction and Kconfig required.
Makefile: To run zram tests
zram test output
-----------------
./zram.sh
--------------------
running zram tests
--------------------
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
test that we can set compression algorithm
supported algs: [lzo] lz4
/sys/block/zram0/comp_algorithm = 'lzo' (1/1)
zram set compression algorithm: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '2097152' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '2M' (1/1)
zram set memory limit: OK
make ext4 filesystem on /dev/zram0
zram mkfs.ext4: OK
mount /dev/zram0
zram mount of zram device(s): OK
fill zram0...
zram0 can be filled with '1932' KB
zram used 3M, zram disk sizes 2097152M
zram compression ratio: 699050.66:1: OK
zram cleanup
zram01 : [PASS]
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '1048576' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '1M' (1/1)
zram set memory limit: OK
make swap with zram device(s)
done with /dev/zram0
zram making zram mkswap and swapon: OK
zram swapoff: OK
zram cleanup
zram02 : [PASS]
CC: Shuah Khan <shuahkh@osg.samsung.com>
CC: Tyler Baker <tyler.baker@linaro.org>
CC: Milosz Wasilewski <milosz.wasilewski@linaro.org>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-By: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
It should be useful to allow 'perf probe' probe at absolute offset of a
target. For example, when (u)probing at a instruction of a shared object
in a embedded system where debuginfo is not avaliable but we know the
offset of that instruction by manually digging.
This patch enables following perf probe command syntax:
# perf probe 0xffffffff811e6615
And
# perf probe /lib/x86_64-linux-gnu/libc-2.19.so 0xeb860
In the above example, we don't need a anchor symbol, so it is possible
to compute absolute addresses using other methods and then use 'perf
probe' to create the probing points.
v1 -> v2:
Drop the leading '+' in cmdline;
Allow uprobing at offset 0x0;
Improve 'perf probe -l' result when uprobe at area without debuginfo.
v2 -> v3:
Split bugfix to a separated patch.
Test result:
# perf probe 0xffffffff8119d175 %ax
# perf probe sys_write %ax
# perf probe /lib64/libc-2.18.so 0x0 %ax
# perf probe /lib64/libc-2.18.so 0x5 %ax
# perf probe /lib64/libc-2.18.so 0xd8e40 %ax
# perf probe /lib64/libc-2.18.so __write %ax
# perf probe /lib64/libc-2.18.so 0xd8e49 %ax
# cat /sys/kernel/debug/tracing/uprobe_events
p:probe_libc/abs_0 /lib64/libc-2.18.so:0x (null) arg1=%ax
p:probe_libc/abs_5 /lib64/libc-2.18.so:0x0000000000000005 arg1=%ax
p:probe_libc/abs_d8e40 /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
p:probe_libc/__write /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
p:probe_libc/abs_d8e49 /lib64/libc-2.18.so:0x00000000000d8e49 arg1=%ax
# cat /sys/kernel/debug/tracing/kprobe_events
p:probe/abs_ffffffff8119d175 0xffffffff8119d175 arg1=%ax
p:probe/sys_write _text+1692016 arg1=%ax
# perf probe -l
Failed to find debug information for address 5
probe:abs_ffffffff8119d175 (on sys_write+5 with arg1)
probe:sys_write (on sys_write with arg1)
probe_libc:__write (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_0 (on 0x0 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_5 (on 0x5 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_d8e40 (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_d8e49 (on __GI___libc_write+9 in /lib64/libc-2.18.so with arg1)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a bug that, when offset is provided but function is
lost, parse_perf_probe_point() will give a "" string as function name,
so the checking code at the end of parse_perf_probe_point() become
useless. For example:
# perf probe +0x1234
Failed to find symbol in kernel
Error: Failed to add events.
After this patch:
# perf probe +0x1234
Semantic error :Offset requires an entry function.
Error: Command Parse Error.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When manually added uprobe point with zero address, 'perf probe -l'
reports error. For example:
# echo p:probe_libc/abs_0 /path/to/lib.bin:0x0 arg1=%ax > \
/sys/kernel/debug/tracing/uprobe_events
# perf probe -l
Error: Failed to show event list.
Probing at 0x0 is possible and useful when lib.bin is not a normal
shared object but is manually mapped. However, in this case kernel
report:
# cat /sys/kernel/debug/tracing/uprobe_events
p:probe_libc/abs_0 /path/to/lib.bin:0x (null) arg1=%ax
This patch supports the above kernel output.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe -l' reports error if it is unable find symbol through
address. Here is an example.
# echo 'p:probe_libc/abs_5 /lib64/libc.so.6:0x5' >
/sys/kernel/debug/tracing/uprobe_events
# cat /sys/kernel/debug/tracing/uprobe_events
p:probe_libc/abs_5 /lib64/libc.so.6:0x0000000000000005
# perf probe -l
Error: Failed to show event list
Also, this situation triggers a logical inconsistency in
convert_to_perf_probe_point() that, it returns ENOMEM but actually it
never try strdup().
This patch removes !tp->module && !is_kprobe condition, so it always
uses address to build function name if symbol not found.
Test result:
# perf probe -l
probe_libc:abs_5 (on 0x5 in /lib64/libc.so.6)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's sometimes useful to specify the object affiliation to multiple
config options like:
libperf-$(CONFIG_X86) += tsc.o
libperf-$(CONFIG_AUXTRACE) += tsc.o
while the object itself is linked only once. Adding the support for this
and ignoring duplicate objects in the object list.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150826130103.GF22670@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't carry an export.h wrapper anymore, remove it from the MANIFEST
file to avoid breaking the make perf-tar targets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150826080750.GD22670@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe -l' panic if there is a manually inserted probing point with
absolute address. For example:
# echo 'p:probe/abs_ffffffff811e6615 0xffffffff811e6615' > /sys/kernel/debug/tracing/kprobe_events
# perf probe -l
Segmentation fault (core dumped)
This patch fix this problem by considering the situation that
"tp->symbol == NULL" in find_perf_probe_point_from_dwarf() and
find_perf_probe_point_from_map().
After this patch:
# perf probe -l
probe:abs_ffffffff811e6615 (on SyS_write+5@fs/read_write.c)
And when debug info is missing:
# rm -rf ~/.debug
# mv /lib/modules/4.2.0-rc1+/build/vmlinux /lib/modules/4.2.0-rc1+/build/vmlinux.bak
# perf probe -l
probe:abs_ffffffff811e6615 (on sys_write+5)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440509256-193590-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It contains a symlinked header we use; ignore it and clean it up
on 'make clean'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ours uses a u32 for the data, since we ensure it's always
aligned and it's x86 so it doesn't matter anyway.
lguest.c:128:8: error: redefinition of ‘struct virtio_pci_cfg_cap’
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 3121bb023e ("virtio: define virtio_pci_cfg_cap in header.")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent changes to rbtree.h may break compilation. There is no
reason to use a liblockdep specific header to begin with, so
we'll use the one shared with all other tools/.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440479985-6696-3-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As Peter Zijlstra pointed out, the varargs for WARN() are
optional, so we need to correctly handle the case where they
don't exist.
This would cause a compilation error.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440479985-6696-2-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 3f735377b ("tools: Copy lib/rbtree.c to tools/lib/") has
removed export.h, which was still in use by liblockdep. Restore
it.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1440479985-6696-1-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull turbostat changes for v4.3 from Len Brown.
* 'turbostat' of https://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: fix typo on DRAM column in Joules-mode
tools/power turbostat: fix parameter passing for forked command
tools/power turbostat: dump CONFIG_TDP
tools/power turbostat: cpu0 is no longer hard-coded, so update output
tools/power turbostat: update turbostat(8)
A TRACESTOP packet is produced when an Intel PT trace enters a defined
region of the address space at which point the tracing stops.
This patch just adds decoder support.
Support for specifying TRACESTOP regions is left until later.
For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-25-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CYC packets are a new Intel PT feature.
CYC packets provide even finer grain timestamp information than MTC and
TSC packets. A CYC packet contains the number of CPU cycles since the
last CYC packet. Unlike MTC and TSC packets, CYC packets are only sent
when another packet is also sent.
Support for this feature is indicated by:
/sys/bus/event_source/devices/intel_pt/caps/psb_cyc
which contains "1" if the feature is supported and "0" otherwise.
CYC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/cyc/u sleep 1
The frequency of CYC packets can also be specified. e.g. perf record -e
intel_pt/cyc,cyc_thresh=2/u sleep 1
CYC packets are not requested by default.
Valid cyc_thresh values are given by:
/sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds
which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.
The value represents the minimum number of CPU cycles that must have
passed before a CYC packet can be sent. The number of CPU cycles is:
2 ^ (value - 1)
e.g. value 4 means 8 CPU cycles must pass before a CYC packet can be
sent. Note a CYC packet is still only sent when another packet is sent,
not at, e.g. every 8 CPU cycles.
If an invalid value is entered, the error message will give a list of
valid values e.g.
$ perf record -e intel_pt/cyc,cyc_thresh=15/u uname
Invalid cyc_thresh for intel_pt. Valid values are: 0-12
tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.
For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-24-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CYC packets provide even finer grain timestamp information than MTC and
TSC packets. A CYC packet contains the number of CPU cycles since the
last CYC packet.
This patch just adds decoder support. The CPU frequency can be related
to TSC using the Maximum Non-Turbo Ratio in combination with the CBR
(core-to-bus ratio) packet. However more accuracy is achieved by simply
interpolating the number of cycles between other timing packets like MTC
or TSC. This patch takes the latter approach.
Support for a default value and validation of values is provided by a
later patch. Also documentation is updated in a separate patch.
For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-23-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MTC packets are a new Intel PT feature.
MTC packets provide finer grain timestamp information than TSC packets.
Support for this feature is indicated by:
/sys/bus/event_source/devices/intel_pt/caps/mtc
which contains "1" if the feature is supported and "0" otherwise.
MTC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/mtc/u sleep 1
The frequency of MTC packets can also be specified. e.g. perf record -e
intel_pt/mtc,mtc_period=2/u sleep 1
The default value is 3 or the nearest lower value that is supported. 0
is always supported.
Valid values are given by:
/sys/bus/event_source/devices/intel_pt/caps/mtc_periods
which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.
The value is converted to the MTC frequency as:
CTC-frequency / (2 ^ value)
e.g. value 3 means one eighth of CTC-frequency
Where CTC is the hardware crystal clock, the frequency of which can be
related to TSC via values provided in cpuid leaf 0x15.
If an invalid value is entered, the error message will give a list of
valid values e.g.
$ perf record -e intel_pt/mtc_period=15/u uname
Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9
tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.
For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-22-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MTC packets provide finer grain timestamp information than TSC packets.
MTC packets record time using the hardware crystal clock (CTC) which is
related to TSC packets using a TMA packet.
This patch just adds decoder support.
Support for a default value and validation of values is provided by a
later patch. Also documentation is updated in a separate patch.
For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-21-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record additional information in the AUXTRACE_INFO event in preparation
for decoding MTC and CYC packets. Pass the information to the decoder.
The AUXTRACE_INFO record can be extended by using the size to indicate
the presence of new members.
The additional information includes PMU config bit positions and the TSC
to CTC (hardware crystal clock) ratio needed to decode MTC packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-20-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features have been added to Intel PT which include a number of new
packet definitions.
This patch adds packet definitions for new packets: TMA, MTC, CYC, VMCS,
TRACESTOP and MNT. Also another bit in PIP is defined.
This patch only adds support for the definitions. Later patches add
support for decoding TMA, MTC, CYC and TRACESTOP which is where those
packets are explained.
VMCS and the newly defined bit in PIP are used with virtualization which
is not supported yet. MNT is a maintenance packet which the decoder
should ignore.
For details, refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-19-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PSB packet is a synchronization packet that provides a starting
point for decoding or recovery from errors.
This patch adds support for a new Intel PT feature that allows the
frequency of PSB packets to be specified.
Support for this feature is indicated by
/sys/bus/event_source/devices/intel_pt/caps/psb_cyc which contains "1"
if the feature is supported and "0" otherwise.
The PSB period can be specified as a PMU config term e.g. perf record -e
intel_pt/psb_period=2/u sleep 1
The default value is 3 or the nearest lower value that is supported. 0
is always supported.
Valid values are given by:
/sys/bus/event_source/devices/intel_pt/caps/psb_periods
which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.
The value is converted to the approximate number of trace bytes between
PSB packets as:
2 ^ (value + 11)
e.g. value 3 means 16KiB bytes between PSBs
If an invalid value is entered, the error message will give a list of
valid values e.g.
$ perf record -e intel_pt/psb_period=15/u uname
Invalid psb_period for intel_pt. Valid values are: 0-5
tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.
For more information about PSB periods refer to the Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace from June 2015 or
later.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The period on synthesized 'instructions' samples was being set to a
fixed value, whereas the correct value is the number of instructions
since the last sample, which is a value that the decoder can provide.
So do it that way.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were depending on the next screen operation after a flush() being
one that would redraw the whole screen so that the progress bar would
be overwritten, when that didn't happen a screen artifact of, say, a
error dialog window would be overlaid on top of the progress bar, fix
it by calling ui_browser__finish(), that now has a TUI implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-el0fyw6duemnx62lydjzhs8c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can erase the progress bar after we're done with it, avoiding
things like:
-------------------------------------------------------------------
┌─Error:──────────────────────────────────────────────────────┐
│Can't annotate unmapped_area_topdown: │
│ │
│No vmlinux file with build id a826726b5ddacfab1f0bade868f1a79│
│was found in the path. │
│ │
│Note that annotation using /proc/kcore requires CAP_SYS_RAWIO│
┌Processin│ │──┐
│ │Please use: │ │
└─────────│ │──┘
│ perf buildid-cache -vu vmlinux │
│ │
│or: │
│ │
│ --vmlinux vmlinux │
│ │
│ │
│Press any key... │
└─────────────────────────────────────────────────────────────┘
Can't annotate unmapped_area_topdown:
-------------------------------------------------------------------
I.e. that finished progress bar behind the error window. It is not a
problem when we end up redrawing the whole screen, but its ugly when
we present such error windows, provide a TUI method so that code like
the above may avoid this situation, as will be done with the annotation
code in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qvktnojzwwe37pweging058t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'annotate' tool does some filtering in the entries in a DSO but
forgot to reset the cache done in dso__find_symbol(), cauxing a SEGV:
[root@zoo ~]# perf annotate netlink_poll
perf: Segmentation fault
-------- backtrace --------
perf[0x526ceb]
/lib64/libc.so.6(+0x34960)[0x7faedfbe0960]
perf(rb_erase+0x223)[0x499d63]
perf[0x4213e9]
perf[0x4bc123]
perf[0x4bc621]
perf[0x4bf26b]
perf[0x4bc855]
perf(perf_session__process_events+0x340)[0x4bddc0]
perf(cmd_annotate+0x6bb)[0x421b5b]
perf[0x479063]
perf(main+0x60a)[0x42098a]
/lib64/libc.so.6(__libc_start_main+0xf0)[0x7faedfbcbfe0]
perf[0x420aa9]
[0x0]
[root@zoo ~]#
Fix it by reseting the find cache when removing symbols.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: b685ac22b4 ("perf symbols: Add front end cache for DSO symbol lookup")
Link: http://lkml.kernel.org/n/tip-b2y9x46y0t8yem1ive41zqyp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix some include paths and add missing inat_types.h.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/55D77696.60102@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A problem can occur in a statically linked perf when vmlinux can be found:
# perf probe --add sys_epoll_pwait
probe-definition(0): sys_epoll_pwait
symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_epoll_pwait address found : ffffffff8122bd40
Matched function: SyS_epoll_pwait
Failed to get call frame on 0xffffffff8122bd40
An error occurred in debuginfo analysis (-2).
Error: Failed to add events. Reason: No such file or directory (Code: -2)
The reason is caused by libdw that, if libdw is statically linked, it
can't load libebl_{arch}.so reliable.
In this case it is still possible to get the address from
/proc/kalksyms. However, perf tries that only when libdw returns
-EBADF.
This patch gives it another chance to utilize symbol table, even if
libdw returns an error code other than -EBADF.
After applying this patch:
# perf probe -nv --add sys_epoll_pwait
probe-definition(0): sys_epoll_pwait
symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_epoll_pwait address found : ffffffff8122bd40
Matched function: SyS_epoll_pwait
Failed to get call frame on 0xffffffff8122bd40
An error occurred in debuginfo analysis (-2).
Trying to use symbols.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: p:probe/sys_epoll_pwait _text+2276672
probe:sys_epoll_pwait (on sys_epoll_pwait)
You can now use it in all perf tools, such as:
perf record -e probe:sys_epoll_pwait -aR sleep 1
Although libdw returns an error (Failed to get call frame), perf tries
symbol table and finally gets correct address.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440151770-129878-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Map clone was written before we introduced reference counts for
maps and dsos, so all that was needed was just a copy and then we
would insert it into the new map_groups instance.
Fix it by, after copying, initializing the map->refcnt, grabbing
a struct dso refcount and resetting pointers that may be used
to determine if a map, when deleted, is in a rb_tree.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pd4mr80o5b9gvk50iineacec@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to produce a call-graph from data exported to a postgresql
database and derived from a processor trace event like intel_pt or intel_bts.
Refer to comments in the scripts call-graph-from-postgresql.py and
export-to-postgresql.py for more details on how to set up the environment,
install the required packages, etc.
Committer note:
From the scripts, for convenience while reading 'git log':
An example of using this script with Intel PT:
$ perf record -e intel_pt//u ls
$ perf script -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py pt_example branches calls
2015-05-29 12:49:23.464364 Creating database...
2015-05-29 12:49:26.281717 Writing to intermediate files...
2015-05-29 12:49:27.190383 Copying to database...
2015-05-29 12:49:28.140451 Removing intermediate files...
2015-05-29 12:49:28.147451 Adding primary keys
2015-05-29 12:49:28.655683 Adding foreign keys
2015-05-29 12:49:29.365350 Done
$ python tools/perf/scripts/python/call-graph-from-postgresql.py pt_example
# The result is a GUI window with a tree representing a context-sensitive
# call-graph. Expanding a couple of levels of the tree and adjusting column
# widths to suit will display something like:
Call Graph: pt_example
Call Path |Object |Count|Time(ns)|Time(%)|Branch Count|Branch Count(%)
v- ls
v- 2638:2638
v- _start ld-2.19.so 1 10074071 100.0 211135 100.0
|- unknown unknown 1 13198 0.1 1 0.0
>- _dl_start ld-2.19.so 1 1400980 13.9 19637 9.3
>- _d_linit_internal ld-2.19.so 1 448152 4.4 11094 5.3
v-__libc_start_main@plt ls 1 8211741 81.5 180397 85.4
>- _dl_fixup ld-2.19.so 1 7607 0.1 108 0.1
>- __cxa_atexit libc-2.19.so 1 11737 0.1 10 0.0
>- __libc_csu_init ls 1 10354 0.1 10 0.0
|- _setjmp libc-2.19.so 1 0 0.0 4 0.0
v- main ls 1 8182043 99.6 180254 99.9
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-11-git-send-email-adrian.hunter@intel.com
[ Added 'python-pyside qt-postgresql' to the yum cmdline installing required packages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script, report and inject all have the same itrace options. Put
them into an asciidoc include file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running the following perf-stat command on an arm64 system produces the
following result...
[root@aarch64 ~]# perf stat -e kmem:mm_page_alloc -a sleep 1
Warning: [kmem:mm_page_alloc] function sizeof not defined
Warning: Error: expected type 4 but read 0
Segmentation fault
[root@aarch64 ~]#
The second warning was a result of the first warning not stopping
processing after it detected the issue.
That is, code that found the issue reported the first problem, but
because it did not exit out of the functions smoothly, it caused the
other warning to appear and not only that, it later caused the SIGSEGV.
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150820151632.13927.13791.email-sent-by-dnelson@teal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events that don't sample the timestamp have a timestamp value of -1.
Intel PT processing wasn't taking that into account.
This is particularly noticeable with Intel BTS because timestamps are
not requested by default.
Then, if the conversion of -1 to TSC results in a small number, the
processing is unaffected.
However if the conversion results in a big number, then the data is
processed prematurely before relevant sideband data like mmap events,
which in turn results in samples with unknown dsos.
Commiter note:
Since BTS wasn't upstream, I split the patch to fold the BTS part with
the patch introducing it, to avoid having this bug in the commit
history. PT was already upstream, so this patch contains that part.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1440060692-5585-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "/proc/kcore requires CAP_SYS_RAWIO" message comes up all the time
for 'perf script' if vmlinux is not found and the user isn't root, even
when the kernel is not being traced and even though the message is only
really relevant for annotation.
Change it to pr_debug and instead put a note in the message displayed if
annotation is not possible.
Also, the file being accessed might not be /proc/kcore. Tools can be
directed to a different location using the --kallsyms option in which
case kcore is expected to be in the same directory. Adjust the message
so it is not misleading in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1440065260-8802-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Patch "perf script: Don't assume evsel position of tracking events"
changed 'perf script' to use 'perf_evlist__id2evsel()'. That results
in a segfault if there is more than 1 event and there are
synthesized mmap events e.g.
$ perf record -e cycles,instructions -p$$ sleep 1
$ perf script --show-mmap-events
Segmentation fault (core dumped)
That happens because these synthesized events have an 'id' of zero
which does not match any 'evsel'.
Currently, these synthesized events use the sample type of the first
evsel.
Change 'perf_evlist__id2evsel()' to reflect that which also makes
it consistent with 'perf_evlist__event2evsel()'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 06b234ec26 ("perf script: Don't assume evsel position of tracking events")
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1440059205-1765-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Fix buildid processing done at the end of a 'perf record' session, a
problem that happened in workloads involving lots of small short-lived
processes. That code was not asking the perf_session layer to order
the events.
Make the code more robust to handle some of the problems with such
out-of-order events and fix 'perf record' to ask for ordered events
on systems where we have perf_event_attr.sample_id_all. (Adrian Hunter)
- Show backtrace when handling a SIGSEGV in 'perf top --stdio' (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5Zmg
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix buildid processing done at the end of a 'perf record' session, a
problem that happened in workloads involving lots of small short-lived
processes. That code was not asking the perf_session layer to order
the events.
Make the code more robust to handle some of the problems with such
out-of-order events and fix 'perf record' to ask for ordered events
on systems where we have perf_event_attr.sample_id_all. (Adrian Hunter)
- Show backtrace when handling a SIGSEGV in 'perf top --stdio' (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It was just freezing instead of informing about the SEGV, fix it and
also print a backtrace, just like in the TUI mode and in 'perf trace'.
Tested by provoking a NULL deref when pressing 'z':
0.31% libc-2.20.so [.] malloc_consolidate
0.31% ld-2.20.so [.] _dl_relocate_object
0.28% cc1 [.] ht_lookup
0.28% cc1 [.] ira_init_register_move_cost
perf: Segmentation fault
Obtained 7 stack frames.
perf(dump_stack+0x32) [0x4d69f2]
perf(sighandler_dump_stack+0x29) [0x4d6a89]
/lib64/libc.so.6(+0x34960) [0x7f5064333960]
perf() [0x438790]
/lib64/libpthread.so.0(+0x752a) [0x7f50663dd52a]
/lib64/libc.so.6(clone+0x6d) [0x7f50643ff22d]
#
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pewrpzqd29rgmhu2wkk7fhww@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After recording, 'perf record' post-processes the data to determine
which buildids are needed.
That processing must process the data in time order, if possible,
because otherwise dependent events, like forks and mmaps, will not make
sense.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-4-git-send-email-adrian.hunter@intel.com
[ Moved the sample_id_add to after trying to open the events, use pr_warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing a fork event, the tools lookup the parent thread by its
tid. In a couple of cases, it is possible for that thread to have the
wrong pid.
That can happen if the data is being processed out of order, or if the
(fork) event that would have removed the erroneous thread was lost.
Assume the latter case, print a dump message, remove the erroneous
thread, create a new one with the correct pid, and keep going.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Attempting to clone map groups onto themselves will deadlock.
It only happens because of other bugs, but the code should protect
itself anyway.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439994561-27436-2-git-send-email-adrian.hunter@intel.com
[ Use pr_debug() instead of dump_fprintf() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently register a platform device for e820 type-12 memory and
register a nvdimm bus beneath it. Registering the platform device
triggers the device-core machinery to probe for a driver, but that
search currently comes up empty. Building the nvdimm-bus registration
into the e820_pmem platform device registration in this way forces
libnvdimm to be built-in. Instead, convert the built-in portion of
CONFIG_X86_PMEM_LEGACY to simply register a platform device and move the
rest of the logic to the driver for e820_pmem, for the following
reasons:
1/ Letting e820_pmem support be a module allows building and testing
libnvdimm.ko changes without rebooting
2/ All the normal policy around modules can be applied to e820_pmem
(unbind to disable and/or blacklisting the module from loading by
default)
3/ Moving the driver to a generic location and converting it to scan
"iomem_resource" rather than "e820.map" means any other architecture can
take advantage of this simple nvdimm resource discovery mechanism by
registering a resource named "Persistent Memory (legacy)"
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
I've had this sitting around for a while. Add it to the
selftests tree. Far Cry running under Wine depends on this
behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ee4d63799a9e5294b70930618b71d04d2770eb2d.1439838962.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sigreturn_64 was broken by ed596cde94 ("Revert x86 sigcontext
cleanups"). Turn it off until we have a better fix.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a184e75ff170a0bcd76bf376c41cad2c402fe9f7.1439838962.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Test PACKET_FANOUT_EBPF by inserting a program into the the kernel
with bpf(), then attaching it to the fanout group. Observe the same
payload-based distribution as in the PACKET_FANOUT_CBPF test.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test PACKET_FANOUT_CBPF by inserting a cBPF program that selects a
socket by payload. Requires modifying the test program to send
packets with multiple payloads.
Also fix a bug in testing the return value of mmap()
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Intel Processor Trace.
Intel PT support fits within the new auxtrace infrastructure. Recording
is supporting by identifying the Intel PT PMU, parsing options and
setting up events.
Decoding is supported by queuing up trace data by cpu or thread and then
decoding synchronously delivering synthesized event samples into the
session processing for tools to consume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding an Intel Processor Trace.
Intel PT trace data must be 'decoded' which involves walking the object
code and matching the trace data packets.
The decoder requests a buffer of binary data via a get_trace()
call-back, which it decodes using instruction information which it gets
via another call-back walk_insn().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a facility to log Intel Processor Trace decoding. The log is
intended for debugging purposes only.
The log file name is "intel_pt.log" and is opened in the current
directory. The log contains a record of all packets and instructions
decoded and can get very large (10 MB would be a small one).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding instructions for Intel Processor Trace. The
kernel x86 instruction decoder is copied for this.
This essentially provides intel_pt_get_insn() which takes a binary
buffer, uses the kernel's x86 instruction decoder to get details of the
instruction and then categorizes it for consumption by an Intel PT
decoder.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439450095-30122-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding Intel Processor Trace packets.
This essentially provides intel_pt_get_packet() which takes a buffer of
binary data and returns the decoded packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the Intel Processor Trace type constant PERF_AUXTRACE_INTEL_PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older kernels attempt to prelink vdso to its virtual address. To permit
annotation using objdump, the map__rip_2objdump() calculation must
result in that same address which we can infer from the start and offset
of the text section.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1439556606-11297-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the following 32-bit compilation errors:
util/annotate.c: In function ‘addr_map_symbol__account_cycles’:
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘u64’ [-Werror=format=]
pr_debug2("BB with bad start: addr %lx start %lx sym %lx saddr %lx\n",
^
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ [-Werror=format=]
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘u64’ [-Werror=format=]
These were introduced by the patch:
"perf report: Add infrastructure for a cycles histogram"
Also change the 'saddr' variable from 'unsigned long' to 'u64'
noting that theoretically we could be processing data captured
on a 64-bit machine but processing it on a 32-bit machine.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: d4957633bf ("perf report: Add infrastructure for a cycles histogram")
Link: http://lkml.kernel.org/r/1439536294-18241-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff reported non functional DWARF unwind under perf script. The
reason is that perf script does not properly configure
callchain_param.record_mode, which is needed by unwind code.
Stealing the code from report and leaving the place for more
initialization code in a hope we could merge it with
report__setup_sample_type one day.
Reported-by: Milian Wolff <mail@milianw.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150813071724.GA21322@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We forgot to install the tempfile, so when the selftests are installed
and then run the subpage_prot_file test fails.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently if generic_buffer is invoked without first enabling any
channels in scan_elements/*_en, it will fail unable to enable the
buffer because bytes_per_datum inside the kernel will be zero if
no channels are available.
It is implied that the user of the program should enable channels
manually or with a script before executing generic_buffer.
Be more helpful by stopping execution if no enabled channels can
be found, and print a helptext that will tell you what is wrong
and what needs to be done.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This makes the event monitor bail out with a helpful error
message if a device does not support events, as a related
fix to iio core now makes it return -ENODEV properly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[djbw: tools/testing/nvdimm/ and memunmap_pmem support]
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Kill arch_memremap_pmem() and just let the architecture specify the
flags to be passed to memremap(). Default to writethrough by default.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We were storing the vfs_getname payload (i.e. ptr->string) into
the trace wide storage area (struct trace), so that we could use the
last payload when setting up the fd->pathname per thread tables, oops,
not a good idea for multi cpu tracing sessions...
Fix it by moving it to the per thread area (struct thread_trace).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3j05ttqyaem7kh7oubvr1keo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 75186a9b09 (perf probe: Fix to show lines of sys_ functions
correctly) introduced a bug by a missed brace around if block. This
fixes to add it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 75186a9b09 ("perf probe: Fix to show lines of sys_ functions correctly")
Link: http://lkml.kernel.org/r/20150812215541.9088.62425.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Fedora 22 version of libdw requires a couple of extra libraries to
link. With a dynamic link the dependencies are pulled in automatically,
but this doesn't work for static linking. Add the needed libraries
explicitely to the feature probe and the Makefile.
v2: Explicitly check for static linking and only add the dependencies
when -static is set. This is to avoid regressions on Arnaldo's system.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439419717-20601-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Take 2 also includes a fix set that was too late for the 4.2 cycle.
As we had a lot of tools and docs work in this set, I have broken those
out into their own categories in this description.
Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'.
* Poll functions for both event chardev and the buffer one were returning
negative error codes (via a positive value).
* A recent change to lsiio adding some error handling that was wrong and
stopped the tool working.
* bmg160 was missing some dependencies in Kconfig
* berlin2-adc had a misshandled register (wrote a value rather than a bitmap)
New device support
* TI opt3001 light sensor
* TXC PA12 ALS and proximity sensor.
* mcp3301 ADC support (in mcp320x driver)
* ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors
common support to allow different WHOAMI register addresses, devices with
fixed scale and allow interrupt equiped magnetometers).
* ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver)
* ADIS16266 gyro (in the adis16260 driver)
* ADIS16137 gyro (in the adis16136 driver)
New functionality
* mmc35240 DT bindings.
* Inverse unit conversion macros to aid handing of values written to sysfs
attributes.
Core cleanup
* Forward declaration of struct iio_trigger to avoid a compile warning.
Driver cleanup / fixes
* mxs-lradc
- Clarify which parts are supported.
- Fix spelling erorrs.
- Missing/extra includes
- reorder includes
- add datasheet name listings for all usable channels (to allow them
to be bound by name from consumer drivers)
* acpi-als - add some function prefixes as per general iio style.
* bmc150_magn - replace a magic value with the existing define.
* vf610 - determine possible sample frequencies taking into account the
electrical characteristics (defining a minimum sample time)
* dht11
- whitespace
- additional docs
- avoid mulitple assignments in one line
- Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick
previously used for timing.
* Fix all drivers that consider 0 a valid IRQ for historical reasons.
* Export I2C module alias info where previously missing (to allow autoprobing)
* Export OF module alias info where previously missing.
* mmc35240 - switch some variables into arrays to improve readability.
* mlx90614 - define some magic numbers for readability.
* bmc150_magn
- expand area locked by a mutex to cover all the use of the
data->buffer.
- use descriptive naming for a mask instead of a magic value.
* berin2-adc
- pass up an error code rather that a generic error
- constify the iio_chan_spec
- some other little tidy ups.
* stk8312
- fix a dependency on triggered buffers in kconfig
- add a check for invalid attribute values
- improve error handling by returning error codes where possible and
return immediately where relevant
- rework macro defs to use GENMASK etc
- change some variable types to reduce unnecessary casting
- clean up code style
- drop a local buffer copy for bulk reads and use the one in data->buffer
instead.
* adis16400 - the adis16448 gyroscope scale was wrong.
* adis16480 - some more wrong scales for various parts.
* adis16300 - has an undocumented product id and serial number registers so
use them.
* iio_simple_dummy - fix some wrong code indentation.
* bmc150-accel - use the chip ID to detect the chip present rather than
verifying the expected part was there. This was in response to a wrong
ACPI entry on the WinBook TW100.
* mma8452
- fix _get_hp_filter_index
- drop a double include
- pass up an error code rather than rewriting it
- range check input values to attribute writes
- register defs tidy up using GENMASK and reordering them to be easier to
follow.
- various coding style cleanups
- put the Kconfig entry in the write place (alphabetically).
Tools related
* Tools cleanup - drop an explicity NULL comparison, some unnecessary braces,
use the ARRAY_SIZE macro, send error messages to stderr instead of dropping
them in the middle of normal output.
* Fix tools to allow that scale and offset attributes are optional.
* More tools fixes including allowing true 32bit data (previously an overflow
prevented more than 31bits)
* Drop a stray header guard that ended up in a c file.
* Make calc_digits static as it isn't exported or in the header.
* Set ci_array pointer to NULL after free as a protection against non safe
usage of the tools core code. Also convert a double pointer to a single
one as the extra level of indirection was unnecessary.
Docs
* DocBook introduction by Daniel Baluta. Glad we are beginning to
draw together some more introductory docs to suplement the various
tools / examples.
* Drop bytes_per_datum sysfs attribute docs as it no longer exists.
* A whole load of missing / fixing of kernel-doc for the core of IIO.
* Document the trigger name sysfs attribute in the ABI docs.
* Minor typos in the ABI docs related to power down modes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/b3G
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.3b-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, features and cleanup for the 4.3 cycle.
Take 2 also includes a fix set that was too late for the 4.2 cycle.
As we had a lot of tools and docs work in this set, I have broken those
out into their own categories in this description.
Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'.
* Poll functions for both event chardev and the buffer one were returning
negative error codes (via a positive value).
* A recent change to lsiio adding some error handling that was wrong and
stopped the tool working.
* bmg160 was missing some dependencies in Kconfig
* berlin2-adc had a misshandled register (wrote a value rather than a bitmap)
New device support
* TI opt3001 light sensor
* TXC PA12 ALS and proximity sensor.
* mcp3301 ADC support (in mcp320x driver)
* ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors
common support to allow different WHOAMI register addresses, devices with
fixed scale and allow interrupt equiped magnetometers).
* ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver)
* ADIS16266 gyro (in the adis16260 driver)
* ADIS16137 gyro (in the adis16136 driver)
New functionality
* mmc35240 DT bindings.
* Inverse unit conversion macros to aid handing of values written to sysfs
attributes.
Core cleanup
* Forward declaration of struct iio_trigger to avoid a compile warning.
Driver cleanup / fixes
* mxs-lradc
- Clarify which parts are supported.
- Fix spelling erorrs.
- Missing/extra includes
- reorder includes
- add datasheet name listings for all usable channels (to allow them
to be bound by name from consumer drivers)
* acpi-als - add some function prefixes as per general iio style.
* bmc150_magn - replace a magic value with the existing define.
* vf610 - determine possible sample frequencies taking into account the
electrical characteristics (defining a minimum sample time)
* dht11
- whitespace
- additional docs
- avoid mulitple assignments in one line
- Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick
previously used for timing.
* Fix all drivers that consider 0 a valid IRQ for historical reasons.
* Export I2C module alias info where previously missing (to allow autoprobing)
* Export OF module alias info where previously missing.
* mmc35240 - switch some variables into arrays to improve readability.
* mlx90614 - define some magic numbers for readability.
* bmc150_magn
- expand area locked by a mutex to cover all the use of the
data->buffer.
- use descriptive naming for a mask instead of a magic value.
* berin2-adc
- pass up an error code rather that a generic error
- constify the iio_chan_spec
- some other little tidy ups.
* stk8312
- fix a dependency on triggered buffers in kconfig
- add a check for invalid attribute values
- improve error handling by returning error codes where possible and
return immediately where relevant
- rework macro defs to use GENMASK etc
- change some variable types to reduce unnecessary casting
- clean up code style
- drop a local buffer copy for bulk reads and use the one in data->buffer
instead.
* adis16400 - the adis16448 gyroscope scale was wrong.
* adis16480 - some more wrong scales for various parts.
* adis16300 - has an undocumented product id and serial number registers so
use them.
* iio_simple_dummy - fix some wrong code indentation.
* bmc150-accel - use the chip ID to detect the chip present rather than
verifying the expected part was there. This was in response to a wrong
ACPI entry on the WinBook TW100.
* mma8452
- fix _get_hp_filter_index
- drop a double include
- pass up an error code rather than rewriting it
- range check input values to attribute writes
- register defs tidy up using GENMASK and reordering them to be easier to
follow.
- various coding style cleanups
- put the Kconfig entry in the write place (alphabetically).
Tools related
* Tools cleanup - drop an explicity NULL comparison, some unnecessary braces,
use the ARRAY_SIZE macro, send error messages to stderr instead of dropping
them in the middle of normal output.
* Fix tools to allow that scale and offset attributes are optional.
* More tools fixes including allowing true 32bit data (previously an overflow
prevented more than 31bits)
* Drop a stray header guard that ended up in a c file.
* Make calc_digits static as it isn't exported or in the header.
* Set ci_array pointer to NULL after free as a protection against non safe
usage of the tools core code. Also convert a double pointer to a single
one as the extra level of indirection was unnecessary.
Docs
* DocBook introduction by Daniel Baluta. Glad we are beginning to
draw together some more introductory docs to suplement the various
tools / examples.
* Drop bytes_per_datum sysfs attribute docs as it no longer exists.
* A whole load of missing / fixing of kernel-doc for the core of IIO.
* Document the trigger name sysfs attribute in the ABI docs.
* Minor typos in the ABI docs related to power down modes.
commit acf50b3586
"tools:iio:lsiio: add error handling"
introduced error handling of errors returned from
read_sysfs_string(), but with a simple if (retval),
missing the fact that these functions return a positive
value if the read was successful.
As a result lsiio regresses and does not show any
devices on my filesystem. Fix this by checking for
only negative error codes.
Cc: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add tests in tests/parse-events.c to check call-graph and time option.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"perf probe --lines sys_poll" shows only the first line of sys_poll,
because the SYSCALL_DEFINE macro:
----
SYSCALL_DEFINE*(foo,...)
{
body;
}
----
is expanded as below (on debuginfo)
----
static inline int SYSC_foo(...)
{
body;
}
int SyS_foo(...) <- is an alias of sys_foo.
{
return SYSC_foo(...);
}
----
So, "perf probe --lines sys_foo" decodes SyS_foo function and it also skips
inlined functions(SYSC_foo) inside the target function because those functions
are usually defined somewhere else.
To fix this issue, this fix checks whether the inlined function is defined at
the same point of the target function, and if so, it doesn't skip the inline
function.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150812012406.11811.94691.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to <-, that may be repurposed for horizontal scrolling.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3rctelxr4yxrjufx7z3fclb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w0niblabqrkecs4o0eogfy6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
But we really should have something like 'strace -yy' here...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyrt1ypfq68u4ljagyk2nj1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle the SRCLINE_UNKNOWN case correctly when processing "srcfile".
Commiter note:
We can't just free it, as it was't allocated via malloc, its a guard
variable.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20150811133655.GC4524@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This time using 'trinity' to test these:
fchmodat, futimesat, llistxattr, lremovexattr, lstat, mknodat,
mq_unlink, stat and vmsplice.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a1uqu249nwwh0ixrhm80k4a4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU changes from Paul E. McKenney:
- The combination of tree geometry-initialization simplifications
and OS-jitter-reduction changes to expedited grace periods.
These two are stacked due to the large number of conflicts
that would otherwise result.
[ With one addition, a temporary commit to silence a lockdep false
positive. Additional changes to the expedited grace-period
primitives (queued for 4.4) remove the cause of this false
positive, and therefore include a revert of this temporary commit. ]
- Documentation updates.
- Torture-test updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently perf evlist -F shows the number as if it's always sampling
frequency. But we now support per-event freq/period settings. So it'd
better to show more detailed info whether it's freq or period.
$ perf record -e 'cpu/config=1/,cpu/config=2,period=300000/' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
$ perf evlist -F
cpu/config=1/: sample_freq=4000
cpu/config=2,period=300000/: sample_period=300000
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf can set per-event value of time and (sampling) period. But I
guess most users like me just want to set frequency rather than period.
So add the 'freq' term in the event parser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases it's useful to characterize samples by file. This is
useful to get a higher level categorization, for example to map cost to
subsystems.
Add a srcfile sort key to perf report. It builds on top of the existing
srcline support.
Commiter notes:
E.g.:
# perf record -F 10000 usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ]
[root@zoo ~]# perf report -s srcfile --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File
# ........ ...........
60.99% .
20.62% paravirt.h
14.23% rmap.c
4.04% signal.c
0.11% msr.h
#
The first line is collecting all the files for which srcfiles couldn't somehow
get resolved to:
# perf report -s srcfile,dso --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File Shared Object
# ........ ........... ................
40.97% . ld-2.20.so
20.62% paravirt.h [kernel.vmlinux]
20.02% . libc-2.20.so
14.23% rmap.c [kernel.vmlinux]
4.04% signal.c [kernel.vmlinux]
0.11% msr.h [kernel.vmlinux]
#
XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't
seen this on Fedora 22.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org
[ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we introduce a new sort key, we need to update the
hists__calc_col_len() function accordingly, otherwise the width
will be limited to strlen(header).
We can't update it when obtaining a line value for a column (for
instance, in sort__srcline_cmp()), because we reset it all when doing a
resort (see hists__output_recalc_col_len()), so we need to, from what is
in the hist_entry fields, set each of the column widths.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 409a8be615 ("perf tools: Add sort by src line/number")
Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The iter_add_next_cumulative_entry() function calls hist_entry__cmp(),
which may want to access the hists where this hist_entry is stored,
initialize it to let that happen and avoid segfaults.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iqg98sfn4fvwcxp0pdvqauie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to unset 'perf_event_attr::freq' bit (default 1) when
'period' term is specified within event definition like:
-e 'cpu/cpu-cycles,call-graph=fp,time,period=100000'
otherwise it will handle the period value as frequency
(and fail if it crossed the maximum allowed frequency value).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150808171210.GC17040@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf report/script srcline currently only the base file name of the
source file is printed. This is a good default because it usually fits
on the screen.
But in some cases we want to know the full file name, for example to
aggregate hits per file.
In the later case we need more than the base file name to resolve file
naming collisions: for example the kernel source has ~70 files named
"core.c"
It's also useful as input to post processing tools which want to point
to the right file.
Add a flag to allow full file name output.
Add an option to perf report/script to enable this option.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438986245-15191-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On error, caller's ci_array is freed and set to NULL to avoid
potential double free if some other user of this code is not
sufficiently careful. Counter is reset to zero for consistency.
Signed-off-by: Joo Aun Saw <jasaw@dius.com.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Move callchain option parse related code to util.c, to avoid dragging
more object files into the python binding.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438890294-33409-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'struct perf_counts' and associated functions into separate
object, so we could remove stat.c object dependency from python build.
It makes the python code to build properly, because it fails to load due
to missing stat-shadow.c object dependency if some patches from Kan
Liang are applied.
So apply this one, then Kan's.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150807105103.GB8624@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previous patches introduce llvm__compile_bpf() to compile source file to
eBPF object. This patch adds testcase to test it. It also tests libbpf
by opening generated object after applying next patch which introduces
HAVE_LIBBPF_SUPPORT option.
Since llvm__compile_bpf() prints long messages which users who don't
explicitly test llvm doesn't care, this patch set verbose to -1 to
suppress all debug, warning and error message, and hint user use 'perf
test -v' to see the full output.
For the same reason, if clang is not found in PATH and there's no [llvm]
section in .perfconfig, skip this test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-17-git-send-email-wangnan0@huawei.com
[ Add tools/lib/bpf/ to tools/perf/MANIFEST, so that the tarball targets build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help user find correct kernel include options, this patch extracts
them from kbuild system by an embedded script kinc_fetch_script, which
creates a temporary directory, generates Makefile and an empty dummy.o
then use the Makefile to fetch $(NOSTDINC_FLAGS), $(LINUXINCLUDE) and
$(EXTRA_CFLAGS) options. The result is passed to compiler script using
'KERNEL_INC_OPTIONS' environment variable.
Because options from kbuild contains relative path like
'Iinclude/generated/uapi', the work directory must be changed. This is
done by previous patch.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436445342-1402-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch detects kernel build directory by checking the existence of
include/generated/autoconf.h.
clang working directory is changed to kbuild directory if it is found,
to help user use relative include path. Following patch will detect
kernel include directory, which contains relative include patch so this
workdir changing is needed.
Users are allowed to set 'kbuild-dir = ""' manually to disable this
checking.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-owyfwfbemrjn0tlj6tgk2nf5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the core patch for supporting eBPF on-the-fly compiling, does
the following work:
1. Search clang compiler using search_program().
2. Run command template defined in llvm-bpf-cmd-template option in
[llvm] config section using read_from_pipe(). Patch of clang and
source code path is injected into shell command using environment
variable using force_set_env().
Commiter notice:
When building with DEBUG=1 we get a compiler error that gets fixed with
the same approach described in commit b236512280:
perf kmem: Fix compiler warning about may be accessing uninitialized variable
The last argument to strtok_r doesn't need to be initialized, its
just a placeholder to make this routine reentrant, but gcc doesn't know
about that and complains, breaking the build, fix it by setting it to
NULL.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces [llvm] config section with 5 options. Following
patches will use then to config llvm dynamica compiling.
'llvm-utils.[ch]' is introduced in this patch for holding all
llvm/clang related stuffs.
Example:
[llvm]
# Path to clang. If omit, search it from $PATH.
clang-path = "/path/to/clang"
# Cmdline template. Following line shows its default value.
# Environment variable is used to passing options.
#
# *NOTE*: -D__KERNEL__ MUST appears before $CLANG_OPTIONS,
# so user have a chance to use -U__KERNEL__ in $CLANG_OPTIONS
# to cancel it.
clang-bpf-cmd-template = "$CLANG_EXEC -D__KERNEL__ $CLANG_OPTIONS \
$KERNEL_INC_OPTIONS -Wno-unused-value \
-Wno-pointer-sign -working-directory \
$WORKING_DIR -c $CLANG_SOURCE -target \
bpf -O2 -o -"
# Options passed to clang, will be passed to cmdline by
# $CLANG_OPTIONS.
clang-opt = "-Wno-unused-value -Wno-pointer-sign"
# kbuild directory. If not set, use /lib/modules/`uname -r`/build.
# If set to "" deliberately, skip kernel header auto-detector.
kbuild-dir = "/path/to/kernel/build"
# Options passed to 'make' when detecting kernel header options.
kbuild-opts = "ARCH=x86_64"
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1437477214-149684-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow enumeration of all bpf_objects, keep them in a list (hidden to
caller). bpf_object__for_each_safe() is introduced to do this iteration.
It is safe even user close the object during iteration.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-23-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces accessors for user of libbpf to retrieve section
name and fd of a opened/loaded eBPF program. 'struct bpf_prog_handler'
is used for that purpose. Accessors of programs section name and file
descriptor are provided. Set/get private data are also impelmented.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1435716878-189507-21-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch utilizes previous introduced bpf_load_program to load
programs in the ELF file into kernel. Result is stored in 'fd' field in
'struct bpf_program'.
During loading, it allocs a log buffer and free it before return. Note
that that buffer is not passed to bpf_load_program() if the first
loading try is successful. Doesn't use a statically allocated log buffer
to avoid potention multi-thread problem.
Instructions collected during opening is cleared after loading.
load_program() is created for loading a 'struct bpf_insn' array into
kernel, bpf_program__load() calls it. By this design we have a function
loads instructions into kernel. It will be used by further patches,
which creates different instances from a program and load them into
kernel.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-20-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_load_program() can be used to load bpf program into kernel. To make
loading faster, first try to load without logbuf. Try again with logbuf
if the first try failed.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-19-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If an eBPF program accesses a map, LLVM generates a load instruction
which loads an absolute address into a register, like this:
ld_64 r1, <MCOperand Expr:(mymap)>
...
call 2
That ld_64 instruction will be recorded in relocation section.
To enable the usage of that map, relocation must be done by replacing
the immediate value by real map file descriptor so it can be found by
eBPF map functions.
This patch to the relocation work based on information collected by
patches:
'bpf tools: Collect symbol table from SHT_SYMTAB section',
'bpf tools: Collect relocation sections from SHT_REL sections'
and
'bpf tools: Record map accessing instructions for each program'.
For each instruction which needs relocation, it inject corresponding
file descriptor to imm field. As a part of protocol, src_reg is set to
BPF_PSEUDO_MAP_FD to notify kernel this is a map loading instruction.
This is the final part of map relocation patch. The principle of map
relocation is described in commit message of 'bpf tools: Collect symbol
table from SHT_SYMTAB section'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-18-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch creates maps based on 'map' section in object file using
bpf_create_map(), and stores the fds into an array in 'struct
bpf_object'.
Previous patches parse ELF object file and collects required data, but
doesn't play with the kernel. They belong to the 'opening' phase. This
patch is the first patch in 'loading' phase. The 'loaded' field is
introduced in 'struct bpf_object' to avoid loading an object twice,
because the loading phase clears resources collected during the opening
which becomes useless after loading. In this patch, maps_buf is cleared.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-17-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces bpf.c and bpf.h, which hold common functions
issuing bpf syscall. The goal of these two files is to hide syscall
completely from user. Note that bpf.c and bpf.h deal with kernel
interface only. Things like structure of 'map' section in the ELF object
is not cared by of bpf.[ch].
We first introduce bpf_create_map().
Note that, since functions in bpf.[ch] are wrapper of sys_bpf, they
don't use OO style naming.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch records the indices of instructions which are needed to be
relocated. That information is saved in the 'reloc_desc' field in
'struct bpf_program'. In the loading phase (this patch takes effect in
the opening phase), the collected instructions will be replaced by map
loading instructions.
Since we are going to close the ELF file and clear all data at the end
of the 'opening' phase, the ELF information will no longer be valid in
the 'loading' phase. We have to locate the instructions before maps are
loaded, instead of directly modifying the instruction.
'struct bpf_map_def' is introduced in this patch to let us know how many
maps are defined in the object.
This is the third part of map relocation. The principle of map relocation
is described in commit message of 'bpf tools: Collect symbol table from
SHT_SYMTAB section'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-15-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects relocation sections into 'struct object'. Such
sections are used for connecting maps to bpf programs. 'reloc' field in
'struct bpf_object' is introduced for storing such information.
This patch simply store the data into 'reloc' field. Following patch
will parse them to know the exact instructions which are needed to be
relocated.
Note that the collected data will be invalid after ELF object file is
closed.
This is the second patch related to map relocation. The first one is
'bpf tools: Collect symbol table from SHT_SYMTAB section'. The
principle of map relocation is described in its commit message.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects all programs in an object file into an array of
'struct bpf_program' for further processing. That structure is for
representing each eBPF program. 'bpf_prog' should be a better name, but
it has been used by linux/filter.h. Although it is a kernel space name,
I still prefer to call it 'bpf_program' to prevent possible confusion.
bpf_object__add_program() creates a new 'struct bpf_program' object.
It first init a variable in stack using bpf_program__init(), then if
success, enlarges obj->programs array and copy the new object in.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-13-git-send-email-wangnan0@huawei.com
[ Made bpf_object__add_program() propagate the error (-EINVAL or -ENOMEM) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch collects symbols section. This section is useful when linking
BPF maps.
What 'bpf_map_xxx()' functions actually require are map's file
descriptors (and the internal verifier converts fds into pointers to
'struct bpf_map'), which we don't know when compiling. Therefore, we
should make compiler generate a 'ldr_64 r1, <imm>' instruction, and
fill the 'imm' field with the actual file descriptor when loading in
libbpf.
BPF programs should be written in this way:
struct bpf_map_def SEC("maps") my_map = {
.type = BPF_MAP_TYPE_HASH,
.key_size = sizeof(unsigned long),
.value_size = sizeof(unsigned long),
.max_entries = 1000000,
};
SEC("my_func=sys_write")
int my_func(void *ctx)
{
...
bpf_map_update_elem(&my_map, &key, &value, BPF_ANY);
...
}
Compiler should convert '&my_map' into a 'ldr_64, r1, <imm>'
instruction, where imm should be the address of 'my_map'. According to
the address, libbpf knows which map it actually referenced, and then
fills the imm field with the 'fd' of that map created by it.
However, since we never really 'link' the object file, the imm field is
only a record in relocation section. Therefore libbpf should do the
relocation:
1. In relocation section (type == SHT_REL), positions of each such
'ldr_64' instruction are recorded with a reference of an entry in
symbol table (SHT_SYMTAB);
2. From records in symbol table we can find the indics of map
variables.
Libbpf first record SHT_SYMTAB and positions of each instruction which
required bu such operation. Then create file descriptor. Finally, after
map creation complete, replace the imm field.
This is the first patch of BPF map related stuff. It records SHT_SYMTAB
into object's efile field for further use.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If maps are used by eBPF programs, corresponding object file(s) should
contain a section named 'map'. Which contains map definitions. This
patch copies the data of the whole section. Map data parsing should be
acted just before map loading.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expand bpf_obj_elf_collect() to collect license and kernel version
information in eBPF object file. eBPF object file should have a section
named 'license', which contains a string. It should also have a section
named 'version', contains a u32 LINUX_VERSION_CODE.
bpf_obj_validate() is introduced to validate object file after loaded.
Currently it only check existence of 'version' section.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_obj_elf_collect() is introduced to iterate over each elf sections to
collection information in eBPF object files. This function will futher
enhanced to collect license, kernel version, programs, configs and map
information.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check endianness according to EHDR. Code is taken from
tools/perf/util/symbol-elf.c.
Libbpf doesn't magically convert missmatched endianness. Even if we swap
eBPF instructions to correct byte order, we are unable to deal with
endianness in code logical generated by LLVM.
Therefore, libbpf should simply reject missmatched ELF object, and let
LLVM to create good code.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support dynamic compiling, this patch allows caller to pass a
in-memory buffer to libbpf by bpf_object__open_buffer(). libbpf calls
elf_memory() to open it as ELF object file.
Because __bpf_object__open() collects all required data and won't need
that buffer anymore, libbpf uses that buffer directly instead of clone a
new buffer. Caller of libbpf can free that buffer or use it do other
things after bpf_object__open_buffer() return.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch defines basic interface of libbpf. 'struct bpf_object' will
be the handler of each object file. Its internal structure is hide to
user. eBPF object files are compiled by LLVM as ELF format. In this
patch, libelf is used to open those files, read EHDR and do basic
validation according to e_type and e_machine.
All elf related staffs are grouped together and reside in efile field of
'struct bpf_object'. bpf_object__elf_finish() is introduced to clear it.
After all eBPF programs in an object file are loaded, related ELF
information is useless. Close the object file and free those memory.
The zfree() and zclose() functions are introduced to ensure setting NULL
pointers and negative file descriptors after resources are released.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By libbpf_set_print(), users of libbpf are allowed to register he/she
own debug, info and warning printing functions. Libbpf will use those
functions to print messages. If not provided, default info and warning
printing functions are fprintf(stderr, ...); default debug printing
is NULL.
This API is designed to be used by perf, enables it to register its own
logging functions to make all logs uniform, instead of separated
logging level control.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the first patch of libbpf. The goal of libbpf is to create a
standard way for accessing eBPF object files. This patch creates
'Makefile' and 'Build' for it, allows 'make' to build libbpf.a and
libbpf.so, 'make install' to put them into proper directories.
Most part of Makefile is borrowed from traceevent.
Before building, it checks the existence of libelf in Makefile, and deny
to build if not found. Instead of throwing an error if libelf not found,
the error raises in a phony target "elfdep". This design is to ensure
'make clean' still workable even if libelf is not found.
Because libbpf requires 'kern_version' field set for 'union bpf_attr'
(bpfdep" is used for that dependency), Kernel BPF API is also checked
by intruducing a new feature check 'bpf' into tools/build/feature,
which checks the existence and version of linux/bpf.h. When building
libbpf, it searches that file from include/uapi/linux in kernel source
tree (controlled by FEATURE_CHECK_CFLAGS-bpf). Since it searches kernel
source tree it reside, installing of newest kernel headers is not
required, except we are trying to port these files to an old kernel.
To avoid checking that file when perf building, the newly introduced
'bpf' feature check doesn't added into FEATURE_TESTS and
FEATURE_DISPLAY by default in tools/build/Makefile.feature, but added
into libbpf's specific.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Bcc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the event parser maximum error index from 10 to 13. That allows
PMU config terms of up to 10 characters to display un-truncated in the
error message.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the value of a PMU config term is silently truncated if it is
too big. This is an impediment to validating the value for other
criteria later on i.e. the user provides an invalid value that gets
truncated to a valid one.
The maximum value validation is only done for the parser where the error
is passed back to the user. In other cases the silent truncation
continues so as not to affect tools that perhaps rely on it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_pmu__format_bits() to get the format bits for a PMU config
term. Intel PT will use this to validate terms and to record format
bits to enable later interpreting the config from the attribute stored
in the perf.data file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_ITRACE_PERIOD_INSTRUCTIONS is zero so it got overwritten by the
default period type.
Fix by checking if the period type was set rather than if the value was
zero when applying the default.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display the cycles by default in branch sort mode.
To make enough room for the new column I removed dso_to. It is usually
redundant with dso_from.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-9-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can process branch data in annotate it makes sense to
support enabling branch recording from top too. Most of the code needed
for this is already in shared code with report. But we need to add:
- The option parsing code (using shared code from the previous patch)
- Document the options
- Set up the IPC/cycles accounting state in the top session
- Call the accounting code in the hist iter callback
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-8-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add two new columns to the annotate display and display the average
cycles and the compute IPC if available.
When the LBR was not in any branch mode the IPC computation is
automatically disabled. We still display the cycle information.
Example output (with made up numbers):
The second column is the IPC and third average cycles.
│ __attribute__((noinline)) f2()
│ {
5.15 0.07 │ push %rbp
0.01 0.07 │ mov %rsp,%rbp
│ c = a / b;
9.87 0.07 │ mov a,%eax
0.07 │ mov b,%ecx
0.07 │ cltd
4.92 0.07 123│ idiv %ecx
70.79 0.07 │ mov %eax,__TMC_END__
│ }
9.25 0.07 │ pop %rbp
0.01 0.07 123│ ← retq
v2: Fix display problems.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the IPC and the basic block cycles for the annotate display.
IPC is computed by counting the instructions, and then dividing the
accounted cycles by that count.
The actual IPC computation can only be done at annotate time, because we
need to parse the objdump output first to know the number of
instructions in the basic block.
The cycles/IPC are also put into the perf function annotation so that
the display code can show them.
Again basic block overlaps are not handled, with the longest winning,
but there are some heuristics to hide the IPC when the longest is not
the most common.
v2: Compute IPC correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Call the earlier added cycle histogram infrastructure from the perf
report hist iter callback. For this we walk the branch records.
This allows to use cycle histograms when browsing perf report annotate.
v2: Rename flag
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the basic infrastructure to keep track of cycle counts per
basic block for annotate. We allocate an array similar to the normal
accounting, and then account branch cycles there.
We handle two cases:
cycles per basic block with start and cycles per branch (these are later
used for either IPC or just cycles per BB)
In the start case we cannot handle overlaps, so always the longest basic
block wins.
For the cycles per branch case everything is accurately accounted.
v2: Remove unnecessary checks. Slight restructure. Move
symbol__get_annotation to another patch. Move histogram allocation.
v3: Merged with current tree
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later patches need to cheaply check that the branch mode is in ANY. Add
a new function to check all event attrs and add a flag to the report
state, which is then initialized.
v2: Rename flag
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cycles is a new branch_info field available on some CPUs that indicates
the time deltas between branches in the LBR.
Add a sort key and output code for the cycles to allow to display the
basic block cycles individually in perf report.
We also pass in the cycles for weight when LBRs are processed, which
allows to get global and local weight, to get an estimate of the total
cost.
And also print the cycles information for perf report -D. I also added
printing for the previously missing LBR flags (mispredict etc.)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf currently fails to build on MIPS as there is no
tools/perf/arch/mips/Build file. Adding an empty file fixes this as
there are no MIPS-specific sources to build.
It looks like the same is needed for Alpha and PA-RISC, though I
haven't been able to test those.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 5e8c0fb6a9 ("perf build: Add arch x86 objects building")
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1438704627.7315.2.camel@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving counter processing code into stat object as
perf_stat__process_counter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing 'struct perf_stat_config' into process_counter(), so that we can
make process_counter() non static and use it from other places.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'interval' into struct perf_stat_config. The point is to
centralize the base stat config so it could be used localy together with
other stat routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'output' into struct perf_stat_config. The point is to centralize
the base stat config so it could be used localy together with other stat
routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'scale' into struct perf_stat_config. The point is to centralize
the base stat config so it could be used localy together with other stat
routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'aggr_mode' into new struct. The point is to centralize the base
stat config so it could be used localy together with other stat routines
in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7b6ff0bdbf ("perf probe ppc64le:
Fixup function entry if using kallsyms lookup") adds 'struct map' into
probe-event.h but not forward declares it. This patch fixes it.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 7b6ff0bdbf ("perf probe ppc64le: Fixup function entry if using kallsyms lookup")
Link: http://lkml.kernel.org/n/1436445342-1402-30-git-send-email-wangnan0@huawei.com
[ No need to include map.h, just forward declare 'struct map' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
va_args alternative to eprintf().
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-19-git-send-email-wangnan0@huawei.com
[ split from another patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The CONFIG_FW_LOADER_USER_HELPER is mostly disabled these days, so skip
timeout setting for these kernels.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without this patch, it is cumbersome to read the trace output but
ignoring the normal, potentially verbose, output of the debuggee. One
common example is doing something like the following:
perf trace -s find /tmp > /dev/null
Without this patch, the trace summary will be lost. Now, it will still
be printed at the end. This behavior is also applied by strace.
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-tqnks6y2cnvm5f9g2dsfr7zl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
color_vprintf was including the length of the invisible escape sequences
in its return argument. Don't include them to make the return value
usable for indentation calculations.
v2: Add comment, rebase
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Seems like it's always '\n' through color_fprintf_ln, which is not used
at all, removing.. ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-2-git-send-email-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass global callchain_param into parse_callchain_record_opt and
perf_evsel__config_callgraph as parameter. So we can reuse these
functions to parse/config local param for callchain.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default lsvmbus lists all the devices in the VMBus.
With -v or -vv, more information is printed, including the VMBus
Rel_ID, class ID, device ID and which channel is bound to which
virtual processor, etc.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patchkit adds the ability to turn off time stamps per event.
One usaful case for partial time is to work with per-event callgraph to
enable "PEBS threshold > 1" (https://lkml.org/lkml/2015/5/10/196), which
can significantly reduce the sampling overhead.
The event samples with time stamps off will not be ordered.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To work like strace and dereference syscall pointer args we need to
insert probes (or tracepoints) right after we copy those bytes from
userspace.
Since we're formatting the syscall args at raw_syscalls:sys_enter time,
we need to have a formatter that just stores the position where, later,
when we get the probe:vfs_getname, we can insert the pointer contents.
Now, if a probe:vfs_getname with this format is in place:
# perf probe -l
probe:vfs_getname (on getname_flags:72@/home/git/linux/fs/namei.c with pathname)
That was, in this case, put in place with:
# perf probe 'vfs_getname=getname_flags:72 pathname=filename:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
#
Then 'perf trace' will notice that and do the pointer -> contents
expansion:
# trace -e open touch /tmp/bla
0.165 (0.010 ms): touch/17752 open(filename: /etc/ld.so.cache, flags: CLOEXEC) = 3
0.195 (0.011 ms): touch/17752 open(filename: /lib64/libc.so.6, flags: CLOEXEC) = 3
0.512 (0.012 ms): touch/17752 open(filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
0.582 (0.012 ms): touch/17752 open(filename: /tmp/bla, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3
#
Roughly equivalent to strace's output:
# strace -rT -e open touch /tmp/bla
0.000000 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 <0.000039>
0.000317 open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 <0.000102>
0.001461 open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 <0.000072>
0.000405 open("/tmp/bla", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3 <0.000055>
0.000641 +++ exited with 0 +++
#
Now we need to either look for at all syscalls that are marked as
pointers and have some well known names ("filename", "pathname", etc)
and set the arg formatter to the one used for the "open" syscall in this
patch.
This implementation works for syscalls with just a string being copied
from userspace, for matching syscalls with more than one string being
copied via the same probe/trace point (vfs_getname) we need to extend
the vfs_getname probe spec to include the pointer too, but there are
some problems with that in 'perf probe' or the kernel kprobes code, need
to investigate before considering supporting multiple strings per
syscall.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xvuwx6nuj8cf389kf9s2ue2s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using it as a magic number, 1024, fix that.
Eventually we need to stop doing it per line, and do it per
arg, traversing the args at output time, to avoid the memmove()
calls that will be used in the next cset to replace pointers
present at raw_syscalls:sys_enter time with its contents that
appear at probe:vfs_getname time, before raw_syscalls:sys_exit
time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4sz3wid39egay1pp8qmbur4u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can later decide if we will store where to expand the
pathname once we are handling vfs_getname or if we should instead
just go on and straight away print the pointer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ytxk5s5jpc50wahffmlxgxuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were accessing trace->syscalls.events members even when that struct
wasn't initialized, i.e. --no-syscalls was specified on the command
line, fix it to show that, still in debug mode, when we have an event
qualifier list, i.e. when we actually are doing subset syscall tracing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 19867b6186 ("perf trace: Use event filters for the event qualifier list")
Link: http://lkml.kernel.org/n/tip-7980ym6vujgh3yiai0cqzc88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libtraceevent handler (session->tevent) is only initialized when
there are tracepoints in a perf.data event list, so do not call
pevent_set_function_resolve() in those cases, fixing a segfault.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xyynkucl5p4bcs13zi4i4b1f@git.kernel.org
Report-link: http://lkml.kernel.org/r/20150803174113.GA20282@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Upcoming changes to static keys is interacting/conflicting with the following
pending TSC commits in tip:x86/asm:
4ea1636b04 x86/asm/tsc: Rename native_read_tsc() to rdtsc()
...
So merge it into the locking tree to have a smoother resolution.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Running generic_buffer without enabling any channel of the
sensor will fail without printing any error message.
Add an error message that indicates buffer enable failed.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When the the sensor data uses 32 bits out of 32, generic_buffer prints
the value 0 for all data read.
In this case, the mask is shifted 32 bits, which is beyond the size of
an integer. This will lead to the mask always being 0. Before printing,
the mask is applied to the raw value, thus generating a final value of 0.
Fix the mask by shifting a 64 bit value instead of an integer.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Conflicts:
arch/s390/net/bpf_jit_comp.c
drivers/net/ethernet/ti/netcp_ethss.c
net/bridge/br_multicast.c
net/ipv4/ip_fragment.c
All four conflicts were cases of simple overlapping
changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support to read the dmesg BPF JIT dump also from a
file instead of the klog buffer. I found this quite useful when going
through some 'before/after patch' logs. It also fixes a regex leak
found by valgrind when no image dump was found.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows EC userspace tool to be built as an ACPI tool.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch splits tools/power/acpi/Makefile to support descend compling for
ACPI tools. In this patch tools/ec related stuff is removed as it is
originally not enabled.
Also a missing .o (utnonansi.o) is added to the acpidump/Makefile.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The test failed due to an oversight on my part when run on a
64-bit kernel. vm86 isn't expected to work at all, and I
mistakenly failed one part of the test because no signal was
delivered.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/502c8bef877b33fe4943885ded6125dfcc7892db.1438205722.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This tests general modify_ldt() behavior (only writes, so far) as
well as synchronous updates via IPI. It fails on old kernels.
I called this ldt_gdt because I'll add set_thread_area() tests to
it at some point.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: security@kernel.org <security@kernel.org>
Cc: xen-devel <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/dcfda65dad07ff5a3ea97a9172b5963bf8031b2e.1438291540.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Force period term to overload global settings, i.e. previously this
command line:
$ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
would result in both events having a period equal to 1000, with the fix we
get something saner:
$ perf evlist -v | grep period
cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
cycles: ... { sample_period, sample_freq }: 1000 ...
$
(Jiri Olsa)
Infrastructure:
- Use the dummy software event with freq=0 in the twatch.py python
binding example, to avoid disabling nohz (Arnaldo Carvalho de Melo)
- Add some missing constants to the python binding (Arnaldo Carvalho de Melo)
- Fix mismatched declarations for elf_getphdrnum, that happens
only in the corner case where this function is not found on
the system (Arnaldo Carvalho de Melo).
- Adding build test for having ending double slash (Jiri Olsa)
- Introduce callgraph_set for callgraph option (Kan Liang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVuk2cAAoJENZQFvNTUqpA15IQAIwfXkfs6we+5+VOXp35bKrl
EiXVTBZPo1IW+duas0exur8nEmdYV9VMuZE8t5WpldOsARxJKjnKyB+muFCDMKqA
3yeBXPATawxRKjqIsPVucksFXGHf19v6Nsh2plqY+qqFynKxm7DibcMxIIFMeqY0
VwdUzHEojIMQ2pzHA7Ef2eSdzSgAUqO06+O9BBB+udizcCAonF5KZh4tw5n2795E
gz0rvnYVC8q7EU2oSKEWwWyj2Ti07iaC0b/adg6jY9OU0Mnlx0K3MkREmq6KQjoz
GrayIknp0CoatLPbpuPf9jz3si7lL/WErl3F3Qeg1lfzAPdGDakmfufQmgyHhEfF
in0qAYxYKMnsgRblTWynOMUWISfdKlhjsofXFv3hXOB2iWbulHLU7WdS8ieyuiGq
N0jcYEII4+/qk+Wi/XbiCujOmaZdvG+slSmx9JgZwXhj4kRiBkUYeNk/JCdNhzgX
u6fse5lBQRI+YDmNXe+QQxUTpL+jpx2OnmpD8v2Yx4YvvLN/SU47Y9VYw9YWmkDq
NySRFn/bBc/zlrT6EnYI7ENpydLIovS+Wa8WSmzQFCDGcbWl2TSKjcVAB1aqhhsk
IAMnzv5/0ybcx8WiYcGqd6Z4gh+WuUenzHGKE3sSmSqbbRRS1WvBYeyeZaU1IGkW
8lrAASPd8X3YP76aP8ww
=XBSW
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Force period term to overload global settings, i.e. previously this
command line:
$ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
would result in both events having a period equal to 1000, with the fix we
get something saner:
$ perf evlist -v | grep period
cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
cycles: ... { sample_period, sample_freq }: 1000 ...
$
(Jiri Olsa)
Infrastructure changes:
- Use the dummy software event with freq=0 in the twatch.py python
binding example, to avoid disabling nohz. (Arnaldo Carvalho de Melo)
- Add some missing constants to the python binding. (Arnaldo Carvalho de Melo)
- Fix mismatched declarations for elf_getphdrnum, that happens
only in the corner case where this function is not found on
the system. (Arnaldo Carvalho de Melo)
- Add build test for having ending double slash. (Jiri Olsa)
- Introduce callgraph_set for callgraph option. (Kan Liang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pawel Moll reported build issue for having extra slash (/) at the end of
the prefix variable.
$ make prefix=/usr/local/
CC tests/attr.o
tests/attr.c: In function ‘test__attr’:
tests/attr.c:168:50: error: expected ‘)’ before ‘;’ token
snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR);
^
tests/attr.c:176:1: error: expected ‘;’ before ‘}’ token
}
^
tests/attr.c:176:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
cc1: all warnings being treated as errors
Adding automated test case for this.
Reported-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150727182417.GD20509@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wire up the syscall number and regs so the tests work on powerpc.
With the powerpc kernel support just merged, all tests pass on ppc64,
ppc64 (compat), ppc64le, ppc, ppc64e and ppc64e (compat).
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The seccomp_bpf test uses BPF_LD|BPF_W|BPF_ABS to load 32-bit values
from seccomp_data->args. On big endian machines this will load the high
word of the argument, which is not what the test wants.
Borrow a hack from samples/seccomp/bpf-helper.h which changes the offset
on big endian to account for this.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Introduce callgraph_set to indicate whether the callgraph option was set
by user.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the command line option settings beats the per event period
settings:
With no global settings, we get per-event configuration:
$ perf record -e 'cpu/instructions,period=20000/' sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 20000 ...
With 'c' option period setup, we get 'c' option value:
$ perf record -e 'cpu/instructions,period=20000/' -c 1000 sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 1000 ...
This patch makes the per-event settings overload the global 'c' option
setup:
$ perf record -e 'cpu/instructions,period=20000/' -c 1000 sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 20000 ...
I think the making the per-event settings to overload any other config
makes more sense than current state. However it breaks the current
'period' term handling, which might cause some noise.. so let's see ;-).
Also fixing parse event tests with the new behaviour.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-3-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to overload any global settings for event and force user
specified term value. It will be useful for new time and backtrace
terms.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-2-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The semantic associated in tools/perf/ with foo__delete(instance) is to
release all resources referenced by 'instance' members and then release
the memory for 'instance' itself.
The perf_session_env__delete() function isn't doing this, it just does
the first part, but the space used by 'instance' itself isn't freed, as
it is embedded in a larger structure, that will be freed at other stage.
For these cases we se foo__exit(), i.e. the usage is:
void foo__delete(foo)
{
if (foo) {
foo__exit(foo);
free(foo);
}
}
But when we have something like:
struct bar {
struct foo foo;
. . .
}
Then we can't really call foo__delete(&bar.foo), we must have this
instead:
void bar__exit(bar)
{
foo__exit(&bar.foo);
/* free other bar-> resources */
}
void bar__delete(bar)
{
if (bar) {
bar__exit(bar);
free(bar);
}
}
So just rename perf_session_env__delete() to perf_session_env__exit().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-djbgpcfo5udqptx3q0flwtmk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When HAVE_ELF_GETPHDRNUM_SUPPORT is false we trip on this problem:
CC /tmp/build/perf/util/symbol-elf.o
util/symbol-elf.c:41:12: error: static declaration of ‘elf_getphdrnum’ follows non-static declaration
static int elf_getphdrnum(Elf *elf, size_t *dst)
^
In file included from util/symbol.h:19:0,
from util/symbol-elf.c:8:
/usr/include/libelf.h:206:12: note: previous declaration of ‘elf_getphdrnum’ was here
extern int elf_getphdrnum (Elf *__elf, size_t *__dst);
^
MKDIR /tmp/build/perf/bench/
/home/git/linux/tools/build/Makefile.build:68: recipe for target '/tmp/build/perf/util/symbol-elf.o' failed
make[3]: *** [/tmp/build/perf/util/symbol-elf.o] Error 1
Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qcmekyfedmov4sxr0wahcikr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To not sample, what we want are just the PERF_RECORD_ lifetime events
for threads, using the default, PERF_TYPE_HARDWARE +
PERF_COUNT_HW_CYCLES and freq=1 (the default), makes perf reenable
irq_vectors:local_timer_entry, disabling nohz, not good for some use
cases where all we want is to get notifications when threads comes and
goes...
Fix it by using PERF_TYPE_SOFTWARE (no counter rotation) and
PERF_COUNT_SW_DUMMY (created by Adrian so that we could have access to
those PERF_RECORD_ goodies).
Reported-by: Luiz Fernando Capitulino <lcapitulino@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jaroslav Skarvada <jskarvad@redhat.com>
Cc: Jeremy Eder <jeder@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kfsijirfrs6xfhkcdxeoen06@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those were added to the kernel and tooling but we forgot to
expose them via the python binding, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-sg1m6t2c58gchidfce4hmitg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The python binding still doesn't provide symbol resolving facilities,
but the recent addition of the trace_event__register_resolver() function
made it add as a dependency the machine__resolve_kernel_addr() method,
that in turn drags all the symbol resolving code.
The problem:
[root@zoo ~]# perf test -v python
17: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 6853
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol: machine__resolve_kernel_addr
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
[root@zoo ~]#
Fix it by requiring this function to receive the resolver as a
parameter, just like pevent_register_function_resolver(), i.e. do
not explicitely refer to an object file not included in
tools/perf/util/python-ext-sources.
[root@zoo ~]# perf test python
17: Try 'import perf' in python, checking link problems : Ok
[root@zoo ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: c3168b0db9 ("perf symbols: Provide libtraceevent callback to resolve kernel symbols")
Link: http://lkml.kernel.org/n/tip-vxlhh95v2em9zdbgj3jm7xi5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with a prefix ending with a slash, for example:
$ make prefix=/usr/local/
one of the perf tests fail to compile due to BUILD_STR macro mishandling
bindir_SQ string containing with two slashes:
-DBINDIR="BUILD_STR(/usr/local//bin)"
with the following error:
CC tests/attr.o
tests/attr.c: In function ‘test__attr’:
tests/attr.c:168:50: error: expected ‘)’ before ‘;’ token
snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR);
^
tests/attr.c:176:1: error: expected ‘;’ before ‘}’ token
}
^
tests/attr.c:176:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
cc1: all warnings being treated as errors
This patch works around the problem by "cleaning" the bindir string
using make's abspath function.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1438092613-21014-1-git-send-email-pawel.moll@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The transaction length metrics in perf stat -T broke recently.
It would not match the metric correctly and always print K/sec.
This was caused by a incorrect update of the cycles_in_tx statistics.
Update the correct variable.
Also the check for zero division was reversed, which resulted in K/sec
being printed for no transactions. Fix this also up.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1438039491-22091-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the three ARS DSM commands:
- Query ARS Capabilities - Queries the firmware to check if a given
range supports scrub, and if so, which type (persistent vs. volatile)
- Start ARS - Starts a scrub for a given range/type
- Query ARS Status - Checks status of a previously started scrub, and
provides the error logs if any.
The commands are described by the example DSM spec at:
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
Also add these commands to the nfit_test test framework, and return
canned data.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add option --show-switch-events to show switch events in a similar
fashion to --show-task-events and --show-mmap-events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracking event does not have to be the first event so replace
perf_evlist__first() with perf_evlist__id2evsel() which uses the event
ID to find the correct evsel.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support processing of PERF_RECORD_SWITCH events and
PERF_RECORD_SWITCH_CPU_WIDE events. There is a single
tools callback for them both so that the tool must
check the event type before using the extra members
in PERF_RECORD_SWITCH_CPU_WIDE.
There is still no way to select the events, though.
That is added in a subsequest patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we now ask libtraceevent, the only user of this payload, to use
perf's symbol resolution routines, there is no need to carry about
~4.5MB per perf.data when we can get it from one of the places the perf
symbol resolution looks for that symtab (debuginfo, ~/.debug/,
/proc/kallsyms, --symfs, etc), using the kernel and modules build-ids to
make sure the right table is used.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-h89ituf9rso2rv1v7kjrbeda@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is not used anymore, since 'perf script' switched to asking
libtraceevent to use tools/perf's symbol resolution routines.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-4ilhofz4b7o8yokvutjt9yzz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were storing a copy of kallsyms inside perf.data file so that we
could resolve kernel addresses to function (start, name, mod) tuples,
but that can be achieved using the symbol resolving routines we have
in symbols.c, and that are used elsewhere in tools/perf.
So, do just like 'perf trace' did and ask libtraceevent to use perf's
symbol resolution routines.
The next step is to just skip whatever kallsyms data is embedded in
older perf.data files and finally to stop storing kallsyms in the perf
data file, as the 20-bytes build-id stored in perf.data's header is
enough to find out the right symtab (be it ELF, kcore, kallsyms, etc) to
use.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-d0rtb8tk9j72pz0ehw5fnp24@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that beautifiers wanting to resolve kernel function addresses to
names can do its work, now, for instance, the 'timer' tracepoints
beautifiers works with 'perf trace', see the "function=tick..." part:
# perf trace --event timer:hrtimer_start
<SNIP>
0.000 timer:hrtimer_start:hrtimer=0xffff88026f3101c0 function=tick_sched_timer/0x0 expires=52098339000000 softexpires=52098339000000)
0.003 timer:hrtimer_start:hrtimer=0xffff88026f3101c0 function=tick_sched_timer/0x0 expires=52098339000000 softexpires=52098339000000)
<SNIP>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-n4i0hxpbl1tnleiqkok47fw2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That provides the function signature expected by libtraceevent's
pevent_set_function_resolver().
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-ie6hvlb6u15y4ulg9j1612zg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tools have a symbol resolver that includes solving kernel
symbols using either kallsyms or ELF symtabs, and it also is using
libtraceevent to format the trace events fields, including via
subsystem specific plugins, like the "timer" one.
To solve fields like "timer:hrtimer_start"'s "function", libtraceevent
needs a way to map from its value to a function name and addr.
This patch provides a way for tools that already have symbol resolving
facilities to ask libtraceevent to use it when needing to resolve
kernel symbols.
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fdx1fazols17w5py26ia3bwh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make scale and offset optional by adding -ENOENT check as not all
drivers implement them.
Signed-off-by: Joo Aun Saw <jasaw@dius.com.au>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Check if the cpu is online before changing the frequency/governor of
the cpu.
Reported-by: Pavaman Subramaniyam <pavsubra@linux.vnet.ibm.com>
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To, with members we already have, check if a kernel level map is for the
kernel proper or for a module.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-m5ic7h0z2crmtj7vi1a1rj3b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will reuse argv style data in following change to display counters
header showing monitored command line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tolerating NULL maps in perf_evlist__propagate_maps, so we dont need to
pass evlist with both cpus and threads maps defined.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need only bool info wether user defined her own set of cpus.
Switching target argument to bool so it could be used from places
without target object defined in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Forcing perf_evlist__set_maps to propagate maps through events, so
cpu/thread maps get set within evlist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Checking also for refcnt in thread_map test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The entry_from_vm86 selftest was very weak. Improve it: test
more types of kernel entries from vm86 mode and test them more
carefully.
While we're at it, try to improve behavior on non-SEP CPUs. The
old code was buggy because I misunderstood the intended
semantics of #UD in vm86, so I didn't handle a possible signal.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d8ef1d7368ac70d8342481563ed50f9a7d2eea6f.1436492057.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
New features:
- Allow filtering perf's pid via 'perf record --exclude-perf' (Wang Nan)
- 'perf trace' now supports syscall groups, like strace, i.e:
$ trace -e file touch file
Will expand 'file' into multiple, file related, syscalls. More work needed to
add extra groups for other syscall groups, and also to complement what was
added for the 'file' group, included as a proof of concept. (Arnaldo Carvalho de Melo)
- Add lock_pi stresser to 'perf bench futex', to test the kernel code
related to FUTEX_(UN)LOCK_PI (Davidlohr Bueso)
User visible fixes:
- Apply --filter to all events in a glob matching, not just the last one (Wang Nan)
Documentation:
- Document setting '-e pmu/period=N/' in the 'perf record' man page (Kan Liang)
Infrastructure:
- 'perf probe' code simplifications and movements to separate files (Masami Hiramatsu)
- Fix makefile generation under 'dash' (Sergei Trofimovich)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EM3X
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Allow filtering out of perf's PID via 'perf record --exclude-perf'. (Wang Nan)
- 'perf trace' now supports syscall groups, like strace, i.e:
$ trace -e file touch file
Will expand 'file' into multiple, file related, syscalls. More work needed to
add extra groups for other syscall groups, and also to complement what was
added for the 'file' group, included as a proof of concept. (Arnaldo Carvalho de Melo)
- Add lock_pi stresser to 'perf bench futex', to test the kernel code
related to FUTEX_(UN)LOCK_PI. (Davidlohr Bueso)
User visible fixes:
- Apply --filter to all events in a glob matching, not just the last one. (Wang Nan)
Documentation changes:
- Document setting '-e pmu/period=N/' in the 'perf record' man page. (Kan Liang)
Infrastructure changes:
- 'perf probe' code simplifications and movements to separate files. (Masami Hiramatsu)
- Fix makefile generation under 'dash'. (Sergei Trofimovich)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An earlier (pre-kernel-integration) refactoring of this code mistakenly
replaced the error condition, <, with a >. Use < to detect an error as
opposed to a successful requeue or signal race.
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Allows a way of measuring low level kernel implementation of FUTEX_LOCK_PI and
FUTEX_UNLOCK_PI.
The program comes in two flavors:
(i) single futex (default), all threads contend on the same uaddr. For the
sake of the benchmark, we call into kernel space even when the lock is
uncontended. The kernel will set it to TID, any waters that come in and
contend for the pi futex will be handled respectively by the kernel.
(ii) -M option for multiple futexes, each thread deals with its own futex. This
is a trivial scenario and only measures kernel handling of 0->TID transition.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/1436259353.12255.78.camel@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Under dash 'echo -n' yields '-n' to stdout. Use printf "" instead.
Signed-off-by: Sergei Trofimovich <siarheit@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437298205-29305-1-git-send-email-siarheit@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce SBUILD_ID_SIZE macro and use it instead of using BUILD_ID_SIZE
* 2 + 1.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150715091428.8915.75265.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Simplify the __add_probe_trace_events() code by taking out the
probe_trace_event__set_name() and updating show_perf_probe_event()
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150715091400.8915.85501.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows 'perf record' to exclude events issued by perf itself
by '--exclude-perf' option.
Before this patch, when doing something like:
# perf record -a -e syscalls:sys_enter_write <cmd>
One could easily get result like this:
# /tmp/perf report --stdio
...
# Overhead Command Shared Object Symbol
# ........ ....... .................. ....................
#
99.99% perf libpthread-2.18.so [.] __write_nocancel
0.01% ls libc-2.18.so [.] write
0.01% sshd libc-2.18.so [.] write
...
Where most events are generated by perf itself.
A shell trick can be done to filter perf itself out:
# cat << EOF > ./tmp
> #!/bin/sh
> exec perf record -e ... --filter="common_pid != \$\$" -a sleep 10
> EOF
# chmod a+x ./tmp
# ./tmp
However, doing so is user unfriendly.
This patch extracts evsel iteration framework introduced by patch 'perf
record: Apply filter to all events in a glob matching' into
foreach_evsel_in_last_glob(), and makes exclude_perf() function append
new filter expression to each evsel selected by a '-e' selector.
To avoid losing filters if user pass '--filter' after '--exclude-perf',
this patch uses perf_evsel__append_filter() in both case, instead of
perf_evsel__set_filter() which removes old filter. As a side effect, now
it is possible to use multiple '--filter' option for one selector. They
are combinded with '&&'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is an old problem in perf's filter applying which first posted at
Sep. 2014 at https://lkml.org/lkml/2014/9/9/944 that, if passing
multiple events in a glob matching expression in cmdline then add
'--filter' after them, the filter will be applied on only the last one.
For example:
# dd if=/dev/zero of=/dev/null &
[1] 464
# perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.239 MB perf.data (2094 samples) ]
# perf report --stdio | tee
...
# Samples: 2K of event 'syscalls:sys_enter_read'
# Event count (approx.): 2092
...
# Samples: 2 of event 'syscalls:sys_exit_read'
# Event count (approx.): 2
...
In this example, filter only applied on 'syscalls:sys_exit_read', and
there's no way to set filter for ''syscalls:sys_enter_read'.
This patch adds a 'cmdline_group_boundary' for 'struct evsel', and
apply filter on all events between two boundary marks.
After applying this patch:
# perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.031 MB perf.data (3 samples) ]
# perf report --stdio | tee
...
# Samples: 1 of event 'syscalls:sys_enter_read'
# Event count (approx.): 1
...
# Samples: 2 of event 'syscalls:sys_exit_read'
# Event count (approx.): 2
...
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436513770-8896-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not used anywhere, expose it when/if needed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f6in51stj17avhk4rv11gjgg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So, if we have an strlist equal to:
"file,close"
And we call it as:
struct strlist_config *config = { .dirname = "~/strace/groups", };
struct strlist *slist = strlist__new("file, close", &config);
And we have:
$ cat ~/strace/groups/file
access
open
openat
statfs
Then the resulting strlist will have these contents:
[ "access", "open", "openat", "statfs", "close" ]
This will be used to implement strace syscall groups in 'perf trace',
but can be used in some other tool, thus being implemented in 'strlist'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wi6l6qtomqlywwr6005jvs05@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch indends to make some cleanup and send printf
error messages to stderr. The changes were performed with coccinelle
for failure messages and manual for other cases, such as wrong usage
messages.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Calculation of the length of an array can be done with the ARRAY_SIZE
macro to make code more abstract and remove the associated
checkpatch.pl warning.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Single statement blocks don’t need braces.
Found with checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Remove explicit NULL comparison and write it in its simpler form as
recommended by checkpatch.pl.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
So that we can pass more info to strlist__new() without having to change
its function signature, just adding entries to the strlist_config struct
with sensible defaults for when those fields are not specified.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5uaaler4931i0s9sedxjquhq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Really allow to specify custom CC, AR or LD
perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
perf hists browser: Take the --comm, --dsos, etc filters into account
perf symbols: Store if there is a filter in place
x86, perf: Fix static_key bug in load_mm_cr4()
tools: Copy lib/hweight.c from the kernel sources
perf tools: Fix the detached tarball wrt rbtree copy
perf thread_map: Fix the sizeof() calculation for map entries
tools lib: Improve clean target
perf stat: Fix shadow declaration of close
perf tools: Fix lockup using 32-bit compat vdso
The CONFIG_RCU_CPU_STALL_INFO has been default-y for a couple of
releases with no complaints, so it is time to eliminate this Kconfig
option entirely, so that the long-form RCU CPU stall warnings cannot
be disabled. This commit does just that.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
To match what its users return.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jntpe2lwg1fxn1bku7uccan0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
turbostat supports forked command when sampling cpu state. However,
the forked command is not allowed to be executed with options, otherwise
turbostat might regard these options as invalid turbostat options.
For example:
./turbostat stress -c 4 -t 10
./turbostat: unrecognized option '-t'
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently none of the RCU-tasks scenarios enables lockdep-RCU, which
causes bugs to be missed. This commit therefore enables lockdep-RCU
on TASKS01.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Core and tools new stuff
* Allow explicit flush of hardware fifo by using an non blocking read.
This is needed to support some of the Android requirements for HW fifo
devices - also makes sense generally and clarifies a corner of the ABI.
* Add some missing modifier names. Mostly these exist for weird and
wonderful event types, but should still be present in the name array.
* Update iio_event_monitor to cope with new channel types.
* generic_buffer gains support for single byte scan elements (no idea
how this never got implemented before!)
New device support
* ROHM rpr0521 light and proximity sensor driver.
* bmc150 gains bmc156 support.
* ms5611 gains ms5607 temperature and pressure sensor support.
Driver functionality
* inv-mpu - add scale_available attributes to aid userspace in
configuring these devices.
* isl29125 - add scale_available attributes.
* stk8ba50 - sampling frequency control, triggered buffer support.
* stk8312 - sampling frequency control, triggered buffer support.
* cc10001 - ensure ADC powered up at probe time if shared by non linux
running CPUs.
* bmc150-magn - decouple the buffer and trigger allowing other triggers
to be used to drive this device's sampling.
Documentation
* Add some previously missed *scale_available attributes to the ABI docs.
Cleanups
* Clarify some crazy naming in iio_triggered_buffer_setup that seems to
have somehow ended up backwards (dates back a long way). Avoid the top
half and bottom half naming entirely given we are how dealing with a
handler and a thread in all cases.
* Tools cleanup including coding style, variable naming improvements, also
a new sanity check on a full event having been read.
* stk8ba50 - replace the scale table with a struct for clarity. Also suspend
the sensor if an error occurs in init.
* hid-sensor-prox - drop uneeded line break.
* mma9551 - use size in words for word read / write avoiding accidental
sending of an odd number of bytes.
* mma9553 - fix code alignment and document the use of a mutex.
* light/Kconfig - typo fix in commment.
* cm3323 - don't eat an error value, replace an unneeded local variable with
a generic local variable with the same use, add some blank lines for clarity.
* pressure/Kconfig - typo in Measurement Specialties name.
* bmc150-accel - actually use a mask definition rather than repeating the
value inline, code style cleanup.
* adc/Kconfig - general help description cleanup.
* ssp_sensors - drop redundant spi driver bus initialization (done in the
spi core)
* tmp006 - use genmask rather than hand generated masks.
* ms5611 - drop IIO_CHAN_INFO_SCALE as this driver provides a processed
output and as such the read only scale adds nothing useful.
* kxcjk-1013, adf4350, dummy - drop unwanted blank lines.
* Drop all owner assignments from i2c_drivers and this is done in the
i2c core.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=0E79
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.3a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new drivers, cleanups and functionality for IIO in the 4.3 cycle.
Core and tools new stuff
* Allow explicit flush of hardware fifo by using an non blocking read.
This is needed to support some of the Android requirements for HW fifo
devices - also makes sense generally and clarifies a corner of the ABI.
* Add some missing modifier names. Mostly these exist for weird and
wonderful event types, but should still be present in the name array.
* Update iio_event_monitor to cope with new channel types.
* generic_buffer gains support for single byte scan elements (no idea
how this never got implemented before!)
New device support
* ROHM rpr0521 light and proximity sensor driver.
* bmc150 gains bmc156 support.
* ms5611 gains ms5607 temperature and pressure sensor support.
Driver functionality
* inv-mpu - add scale_available attributes to aid userspace in
configuring these devices.
* isl29125 - add scale_available attributes.
* stk8ba50 - sampling frequency control, triggered buffer support.
* stk8312 - sampling frequency control, triggered buffer support.
* cc10001 - ensure ADC powered up at probe time if shared by non linux
running CPUs.
* bmc150-magn - decouple the buffer and trigger allowing other triggers
to be used to drive this device's sampling.
Documentation
* Add some previously missed *scale_available attributes to the ABI docs.
Cleanups
* Clarify some crazy naming in iio_triggered_buffer_setup that seems to
have somehow ended up backwards (dates back a long way). Avoid the top
half and bottom half naming entirely given we are how dealing with a
handler and a thread in all cases.
* Tools cleanup including coding style, variable naming improvements, also
a new sanity check on a full event having been read.
* stk8ba50 - replace the scale table with a struct for clarity. Also suspend
the sensor if an error occurs in init.
* hid-sensor-prox - drop uneeded line break.
* mma9551 - use size in words for word read / write avoiding accidental
sending of an odd number of bytes.
* mma9553 - fix code alignment and document the use of a mutex.
* light/Kconfig - typo fix in commment.
* cm3323 - don't eat an error value, replace an unneeded local variable with
a generic local variable with the same use, add some blank lines for clarity.
* pressure/Kconfig - typo in Measurement Specialties name.
* bmc150-accel - actually use a mask definition rather than repeating the
value inline, code style cleanup.
* adc/Kconfig - general help description cleanup.
* ssp_sensors - drop redundant spi driver bus initialization (done in the
spi core)
* tmp006 - use genmask rather than hand generated masks.
* ms5611 - drop IIO_CHAN_INFO_SCALE as this driver provides a processed
output and as such the read only scale adds nothing useful.
* kxcjk-1013, adf4350, dummy - drop unwanted blank lines.
* Drop all owner assignments from i2c_drivers and this is done in the
i2c core.
Commit 5ef7bbb09f ("perf tools: Allow to specify custom linker
command") was meant to enable usage non $(CROSS_COMPILE)ld linker during
perf building.
But implementation didn't take into account the fact that LD is a
pre-defined variable in GNU Make. I.e. it is always defined.
Which means there's no point to check "LD ?= ..." because it will never
succeed.
And so LD will be either that explicitly passed to make like this:
------->8-------
make LD=path_to_my_ld ...
------->8-------
or default value, which is host's "ld".
Latter leads to failure of cross-linkage because instead of cross linker
"$(CROSS_COMPILE)ld" host's "ld" is used.
Fortunately there's a way to do correct substitution of $(CROSS_COMPILE)ld
with user defined LD on command-line.
As a reference was used implementation in "tools/lib/traceevent/Makefile".
Build tested for x86_64 and ARC.
Thanks Jiri for this hint.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Fixes: 5ef7bbb09f ("perf tools: Allow to specify custom linker command")
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1436864720-26316-1-git-send-email-abrodkin@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the checking for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT for AUX area mmaps
until after checking if such mmaps are used anyway.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/55A5023C.7020907@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'period' param is not defined in
/sys/bus/event_sources/devices/<pmu>/format/*, but can be used, document
it.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436345097-11113-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point:
commit 2c86c7ca76
Author: Namhyung Kim <namhyung@kernel.org>
Date: Mon Mar 17 18:18:54 2014 -0300
perf report: Merge al->filtered with hist_entry->filtered
We stopped dropping samples for things filtered via the --comms, --dsos,
--symbols, etc, i.e. things marked as filtered in the symbol resolution
routines (thread__find_addr_map(), perf_event__preprocess_sample(),
etc).
But then, in:
commit 268397cb2a
Author: Namhyung Kim <namhyung@kernel.org>
Date: Tue Apr 22 14:49:31 2014 +0900
perf top/tui: Update nr_entries properly after a filter is applied
We don't take into account entries that were filtered in
perf_event__preprocess_sample() and friends, which leads to
inconsistency in the browser seek routines, that expects the number of
hist_entry->filtered entries to match what it thinks is the number of
unfiltered, browsable entries.
So, for instance, when we do:
perf top --symbols ___non_existent_symbol___
the hist_browser__nr_entries() routine thinks there are no filters in
place, uses the hists->nr_entries but all entries are filtered, leading
to a segfault.
Tested with:
perf top --symbols malloc,free --percentage=relative
Freezing, by pressing 'f', at any time and doing the math on the
percentages ends up with 100%, ditto for:
perf top --dsos libpthread-2.20.so,libxul.so --percentage=relative
Both were segfaulting, all fixed now.
More work needed to do away with checking if filters are in place, we
should just use the nr_non_filtered_samples counter, no need to
conditionally use it or hists.nr_filter, as what the browser does is
just show unfiltered stuff. An audit of how it is being accounted is
needed, this is the minimal fix.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 268397cb2a ("perf top/tui: Update nr_entries properly after a filter is applied")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w01d5q97qk0d64kuojme5in@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting yup the symbols library we setup several filter lists,
for dsos, comms, symbols, etc, and there is code that, if there are
filters, do certain operations, like recalculate the number of non
filtered histogram entries in the top/report TUI.
But they were considering just the "Zoom" filters, when they need to
take into account as well the above mentioned filters (perf top --comms,
--dsos, etc).
So store in symbol_conf.has_filter true if any of those filters is in
place.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f5edfmhq69vfvs1kmikq1wep@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull libnvdimm fixes from Dan Williams:
"1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor
bug fixes (patches 1-6)
2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10).
Granted these are slightly large for a -rc update. They have been
out for review in one form or another since the end of May and were
deferred from the merge window while we settled on the "PMEM API"
for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem,
and wmb_pmem).
Now that those apis are merged we implement them in the BLK driver
to guarantee that mmio aperture moves stay ordered with respect to
incoming read/write requests, and that writes are flushed through
those mmio-windows and platform-buffers to be persistent on media.
These pass the sub-system unit tests with the updates to
tools/testing/nvdimm, and have received a successful build-report from
the kbuild robot (468 configs).
With acks from Rafael for the touches to drivers/acpi/"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm:
nfit: add support for NVDIMM "latch" flag
nfit: update block I/O path to use PMEM API
tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test
tools/testing/nvdimm: fix return code for unimplemented commands
tools/testing/nvdimm: mock ioremap_wt
pmem: add maintainer for include/linux/pmem.h
nfit: fix smatch "use after null check" report
nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails
libnvdimm: smatch cleanups in __nd_ioctl
sparse: fix misplaced __pmem definition
In preparation for fixing the BLK path to properly use "directed
pcommit" enable the unit test infrastructure to emit mock "flush"
tables. Writes to these flush addresses trigger a memory controller to
flush its internal buffers to persistent media, similar to the x86
"pcommit" instruction.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The implementation for the new "DIMM Flags" DSM relies on the -ENOTTY
return code to indicate that the flags are unimplimented and to fall
back to a safe default. As is the -ENXIO error code erroneoously
indicates to fail enabling a BLK region.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the 4.2-rc1 merge the default_memremap_pmem() implementation switched
from ioremap_nocache() to ioremap_wt(). Add it to the list of mocked
routines to restore the ability to run the unit tests.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Instead of accessing it directly, as it uses EXPORT_SYMBOL, that has
no meaning in tools/perf and because we removed the stubs for it, i.e.
we removed the tools/include/linux/export.h file.
This fixes the build for the detached tarball sources cases and removes
one more source of entanglement with the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oyqx541o7apa2cskjhcxi6nx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The python binding build process was still looking at the kernel
rbtree.c file, so, when doing a in-tree build it would work, but when
creating a tarball using tools/perf/MANIFEST as the contents list and
then trying to build the resulting detached sources, it failed.
Fix it by removing one level of indirection from rbtree.c in the
tools/perf/util/python-ext-sources file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8u83c2k5guyhxdlkaaqis8k4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we started adding extra stuff per array entry, growing the size of
those entries to more than sizeof(pid_t), we had to convert those sizeof
operations to the more robust sizeof(map->map[0]) idiom, that is future
proof, i.e. if/when we add more stuff to those entries, that expression
will produce the new per-entry size.
And besides that, we need to zero out those extra fields, that sometimes
may not get filled, like when we couldn't care less about the comms,
since we don't need those, but since we will try freeing it at
thread_map__delete(), we better fix it.
That is why a thread_map__realloc() was provided.
But that method wasn't used in thread_map__new_by_uid(), fix it.
Reported-by: Ingo Molnar <mingo@kernel.org>
Fixes: 792402fd5c ("perf thrad_map: Add comm string into array")
Fixes: 9d7e8c3a96 ("perf tools: Add thread_map__(alloc|realloc) helpers")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6a0swlm6m8lnu3wpjv284hkb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vinson reported shadow declaration of close introduced
by the following commit:
106a94a0f8 perf stat: Introduce read_counters function
Using close_counters name instead.
Reported-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 106a94a0f8 ("perf stat: Introduce read_counters function")
Link: http://lkml.kernel.org/r/20150708111731.GA3512@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __machine__findnew_compat() function is called only from
__machine__findnew_vdso_compat() which is called only from
machine__findnew_vdso() which already holds machine->dsos.lock, so
remove locking from __machine__findnew_compat().
This manifests itself tracing 32-bit programs with a 64-bit perf.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436267618-20521-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test passes on 4.0 and fails on some newer kernels.
Fortunately, the failure is likely not a big deal.
This test will make sure that we don't break it further (e.g. OOPSing)
as we clean up the entry code and that we eventually fix the
regression.
There's arguably no need to preserve the old ABI here --
anything that makes it into a fast (vDSO) syscall with a bad
stack is about to crash no matter what we do.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/9cfcc51005168cb1b06b31991931214d770fc59a.1435952415.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that we have two mountpoints, one for debugfs and another, for
tracefs, we end up needing to check permissions for both, so, on
a system with default config we were always asking the user to
check the permission of the debugfs mountpoint, even when it was
already sufficient. Fix it.
E.g.:
$ trace -e nanosleep usleep 1
Error: No permissions to read /sys/kernel/debug/tracing/events/raw_syscalls/sys_(enter|exit)
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
$ sudo mount -o remount,mode=755 /sys/kernel/debug
$ trace -e nanosleep usleep 1
Error: No permissions to read /sys/kernel/debug/tracing/events/raw_syscalls/sys_(enter|exit)
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing'
$ sudo mount -o remount,mode=755 /sys/kernel/debug/tracing
$ trace -e nanosleep usleep 1
0.326 ( 0.061 ms): usleep/11961 nanosleep(rqtp: 0x7ffef1081c50) = 0
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-0viljeuhc7q84ic8kobsna43@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that there is no paravirt TSC, the "native" is
inappropriate. The function does RDTSC, so give it the obvious
name: rdtsc().
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/fd43e16281991f096c1e4d21574d9e1402c62d39.1434501121.git.luto@kernel.org
[ Ported it to v4.2-rc1. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the ->read_tsc() paravirt hook is gone, rdtscll() is
just a wrapper around native_read_tsc(). Unwrap it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/d2449ae62c1b1fb90195bcfb19ef4a35883a04dc.1434501121.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the option -T is used with option --per-thread, then time is still
not sampled. Fix that by using OPT_BOOLEAN_SET to distinguish when the
user used the -T option as opposed to the default case when timestamps
are enabled but only for per-cpu recording.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436183461-1918-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strfilter__delete() function tests whether its argument is NULL and
then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/5597751A.5000506@users.sourceforge.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use raw_syscalls:sys_{enter,exit} events to show the syscalls, but were
using a rather lazy/inneficient way to implement our 'strace -e' equivalent:
filter out after reading the events in the ring buffer.
Deflect more work to the kernel by appending a filter expression for that,
that, together with the pid list, that is always present, if only to filter the
tracer itself, reduces pressure on the ring buffer and otherwise use
infrastructure already in place in the kernel to do early filtering.
If we use it with -v we can see the filter passed to the kernel,
for instance, for this contrieved case:
# trace -v -e \!open,close,write,poll,recvfrom,select,recvmsg,writev,sendmsg,read,futex,epoll_wait,ioctl,eventfd --filter-pids 2189,2566,1398,2692,4475,4532
<SNIP>
(common_pid != 2514 && common_pid != 1398 && common_pid != 2189 && common_pid != 2566 && common_pid != 2692 && common_pid != 4475 && common_pid != 4532) && (id != 3 && id != 232 && id != 284 && id != 202 && id != 16 && id != 2 && id != 7 && id != 0 && id != 45 && id != 47 && id != 23 && id != 46 && id != 1 && id != 20)
0.011 (0.011 ms): caribou/2295 eventfd2(flags: CLOEXEC|NONBLOCK) = 18
16.946 (0.019 ms): caribou/2295 eventfd2(flags: CLOEXEC|NONBLOCK) = 18
38.598 (0.167 ms): chronyd/794 socket(family: INET, type: DGRAM ) = 4
38.603 (0.002 ms): chronyd/794 fcntl(fd: 4<socket:[239307]>, cmd: GETFD) = 0
38.605 (0.001 ms): chronyd/794 fcntl(fd: 4<socket:[239307]>, cmd: SETFD, arg: 1) = 0
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ti2tg18atproqpguc2moinp6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow building filters in evsel->filter, that will eventually be
applied via perf_evsel__apply_filter().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-sjfoes3pycx7nlpmgedca13v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of calling perf_evsel__apply_filter straight away, so that
we can, in the next patches, expand the filter with more conditions
before actually calling the ioctl to pass the end result filter to
the kernel.
Now we need to call perf_evlist__apply_filters() after the filter
is completely setup, i.e. do the ioctl calls.
The perf_evlist__apply_filters() method was already in place, because
that is the model for the other tools that receives filters in the
command line: go on setting then in the evsel->filter and only at
the end, after parsing the whole command line, apply them.
We get, as a bonus, a more expressive message that states which
event, if any, failed to have the filter applied to, with an
error message stating what happened.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f429pgz75ryz7tpe6v74etre@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to be able to go on constructing a complex filter in multiple
stages, since we can only set one filter per event.
For instance, we need to be able, in 'perf trace' to filter by the
'common_pid' field all the time, if only for the tracer itself, to
avoid a feedback loop, and, in addition, we may want to filter the
raw_syscalls:sys_{enter,exit} events by its 'id' filter, when using
'perf trace -e open,close' or 'perf trace -e !open,close', i.e. when
we are interested in just a subset of syscalls or when we are not
interested in it.
So we will have:
perf_evsel__set_filter(evsel, char *filter)
Replaces whatever is in evsel->filter.
perf_evsel__append_filter(evsel, const char *op, char *filter)
Appends, using op ("&&" or "||") with what is in evsel->filter.
perf_evsel__apply_filter(evsel, filter):
That actually applies a filter, be it the one being
constructed in evsel->filter, or any other, for tools
with more specific ways to build the filter, issuing
the appropriate ioctl for all the evsel fds.
The same changes will be made to the evlist__{set,apply} variants to
keep everything consistent.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2s5z9xtpnc2lwio3cv5x0jek@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That we will use to set a filter on raw_syscalls:sys_{enter,exit}
events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2acxrcxyu7tlolrfilpty38y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need to set filters on then.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u8hpgjpf3w8o1prnnjnwegwf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
char *asprintf_expr_in_ints(const char *var, size_t nints, int *ints);
char *asprintf_expr_not_in_ints(const char *var, size_t nints, int *ints);
Example of output formatted with those functions:
# ./tp_filter 6 12 2015
asprintf_expr_in_ints: id == 6 || id == 12 || id == 2015
asprintf_expr_not_in_ints: id != 6 && id != 12 && id != 2015
#
It'll be used with, for instance, perf_evsel__set_filter_in_ints(), that
will be used in turn to ask the kernel to filter out all raw_syscalls:*
except for the ones specified by the user via:
$ perf trace -e some,list,of,syscalls
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jt07vfp6bd8y50c05j1t7hrn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To complete the transitioning to not to share the same files with the
kernel, also moving it from tools/perf/include/linux/ to
tools/include/linux to make the whoke rbtree kit to other tools/ living
codebases.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5bxyehixafckqm6ez25alnfo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous step, copying the contents minus the rcupdate.h parts, was
done as a minimal fix, now do the move from tools/perf/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-52fllxtsgmtke66pmv98mcma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can remove kernel specific stuff we've been stubbing out via
a tools/include/linux/export.h that gets removed in this patch and to
avoid breakages in the future like the one fixed recently where
rcupdate.h started being used in rbtree.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rxuzfsozpb8hv1emwpx06rm6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using the include/linux/rbtree.h directly from the kernel,
which broke the build as soon as it started using rcupdate.h, to
avoid dragging the rcu header files into tools/, for which there is
no use so far, grab a copy of rbtree.h.
This is the minimal fix, later patches will copy as well lib/rbtree.c
and move rbtree.h into tools/include/, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dfmuj0j63w4by7vhlh4hhn74@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need it to build rbtree.c after this cset:
commit d72da4a4d9
Author: Peter Zijlstra <peterz@infradead.org>
Date: Wed May 27 11:09:36 2015 +0930
rbtree: Make lockless searches non-fatal
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qlnzhezv5ddwst0w9fydju0y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some sensors export data in an 8-bit format.
Add a single-byte case for the generic_buffer tool so that
these sensors' buffer data can be visualized.
Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull perf updates from Ingo Molnar:
"This tree includes an x86 PMU scheduling fix, but most changes are
late breaking tooling fixes and updates:
User visible fixes:
- Create config.detected into OUTPUT directory, fixing parallel
builds sharing the same source directory (Aaro Kiskinen)
- Allow to specify custom linker command, fixing some MIPS64 builds.
(Aaro Kiskinen)
- Fix to show proper convergence stats in 'perf bench numa' (Srikar
Dronamraju)
User visible changes:
- Validate syscall list passed via -e argument to 'perf trace'.
(Arnaldo Carvalho de Melo)
- Introduce 'perf stat --per-thread' (Jiri Olsa)
- Check access permission for --kallsyms and --vmlinux (Li Zhang)
- Move toggling event logic from 'perf top' and into hists browser,
allowing freeze/unfreeze with event lists with more than one entry
(Namhyung Kim)
- Add missing newlines when dumping PERF_RECORD_FINISHED_ROUND and
showing the Aggregated stats in 'perf report -D' (Adrian Hunter)
Infrastructure fixes:
- Add missing break for PERF_RECORD_ITRACE_START, which caused those
events samples to be parsed as well as PERF_RECORD_LOST_SAMPLES.
ITRACE_START only appears when Intel PT or BTS are present, so..
(Jiri Olsa)
- Call the perf_session destructor when bailing out in the inject,
kmem, report, kvm and mem tools (Taeung Song)
Infrastructure changes:
- Move stuff out of 'perf stat' and into the lib for further use
(Jiri Olsa)
- Reference count the cpu_map and thread_map classes (Jiri Olsa)
- Set evsel->{cpus,threads} from the evlist, if not set, allowing the
generalization of some 'perf stat' functions that previously were
accessing private static evlist variable (Jiri Olsa)
- Delete an unnecessary check before the calling free_event_desc()
(Markus Elfring)
- Allow auxtrace data alignment (Adrian Hunter)
- Allow events with dot (Andi Kleen)
- Fix failure to 'perf probe' events on arm (He Kuang)
- Add testing for Makefile.perf (Jiri Olsa)
- Add test for make install with prefix (Jiri Olsa)
- Fix single target build dependency check (Jiri Olsa)
- Access thread_map entries via accessors, prep patch to hold more
info per entry, for ongoing 'perf stat --per-thread' work (Jiri
Olsa)
- Use __weak definition from compiler.h (Sukadev Bhattiprolu)
- Split perf_pmu__new_alias() (Sukadev Bhattiprolu)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
perf tools: Allow to specify custom linker command
perf tools: Create config.detected into OUTPUT directory
perf mem: Fill in the missing session freeing after an error occurs
perf kvm: Fill in the missing session freeing after an error occurs
perf report: Fill in the missing session freeing after an error occurs
perf kmem: Fill in the missing session freeing after an error occurs
perf inject: Fill in the missing session freeing after an error occurs
perf tools: Add missing break for PERF_RECORD_ITRACE_START
perf/x86: Fix 'active_events' imbalance
perf symbols: Check access permission when reading symbol files
perf stat: Introduce --per-thread option
perf stat: Introduce print_counters function
perf stat: Using init_stats instead of memset
perf stat: Rename print_interval to process_interval
perf stat: Remove perf_evsel__read_cb function
perf stat: Move perf_stat initialization counter process code
perf stat: Move zero_per_pkg into counter process code
perf stat: Separate counters reading and processing
perf stat: Introduce read_counters function
perf stat: Introduce perf_evsel__read function
...
- Fix system resume problems related to 32-bit and 64-bit versions
of the Firmware ACPI Control Structure (FACS) in the firmare (Lv
Zheng).
- Fix double initialization of the FACS (Lv Zheng).
- Add _CLS object processing code to ACPICA (Suravee Suthikulpanit).
- Add support for the (currently missing) new GIC version field in
the Multiple APIC Description Table (MADT) (Hanjun Guo).
- Add support for overriding objects in the ACPI namespace to
ACPICA and OSDT support (Lv Zheng, Bob Moore, Zhang Rui).
- Updates related to the TCPA and TPM2 ACPI tables (Bob Moore).
- Restore the commit modifying _REV to always return "2" (as
required by ACPI 6) and add a blacklisting mechanism for
systems that may be affected by that change (Rafael J Wysocki).
- Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=MlWS
-----END PGP SIGNATURE-----
Merge tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPICA updates from Rafael Wysocki:
"Additional ACPICA material for v4.2-rc1
This will update the ACPICA code in the kernel to upstream revision
20150619 (a bug-fix release mostly including stable-candidate fixes)
and restore an earlier ACPICA commit that had to be reverted due to a
regression introduced by it (the regression is addressed by
blacklisting the only known system affected by it to date).
The only new feature added by this update is the support for
overriding objects in the ACPI namespace and a new ACPI table that can
be used for that called the Override System Definition Table (OSDT).
That should allow us to "patch" the ACPI namespace built from
incomplete or incorrect ACPI System Definition tables (DSDT, SSDT)
during system startup without the need to provide replacements for all
of those tables in the future.
Specifics:
- Fix system resume problems related to 32-bit and 64-bit versions of
the Firmware ACPI Control Structure (FACS) in the firmare (Lv
Zheng)
- Fix double initialization of the FACS (Lv Zheng)
- Add _CLS object processing code to ACPICA (Suravee Suthikulpanit)
- Add support for the (currently missing) new GIC version field in
the Multiple APIC Description Table (MADT) (Hanjun Guo)
- Add support for overriding objects in the ACPI namespace to ACPICA
and OSDT support (Lv Zheng, Bob Moore, Zhang Rui)
- Updates related to the TCPA and TPM2 ACPI tables (Bob Moore)
- Restore the commit modifying _REV to always return "2" (as required
by ACPI 6) and add a blacklisting mechanism for systems that may be
affected by that change (Rafael J Wysocki)
- Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner)"
* tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
Revert 'Revert "ACPICA: Permanently set _REV to the value '2'."'
ACPI / init: Make it possible to override _REV
ACPICA: Update version to 20150619
ACPICA: Comment update, no functional change
ACPICA: Update TPM2 ACPI table
ACPICA: Update definitions for the TCPA and TPM2 ACPI tables
ACPICA: Split C library prototypes to new header
ACPICA: De-macroize calls to standard C library functions
ACPI / acpidump: Update acpidump manual
ACPICA: acpidump: Convert the default behavior to dump from /sys/firmware/acpi/tables
ACPICA: acpidump: Allow customized tables to be dumped without accessing /dev/mem
ACPICA: Cleanup output for the ASL Debug object
ACPICA: Update for acpi_install_table memory types
ACPICA: Namespace: Change namespace override to avoid node deletion
ACPICA: Namespace: Add support of OSDT table
ACPICA: Namespace: Add support to allow overriding objects
ACPICA: ACPI 6.0: Add values for MADT GIC version field
ACPICA: Utilities: Add _CLS processing
ACPICA: Add dragon_fly support to unix file mapping file
ACPICA: EFI: Add EFI interface definitions to eliminate dependency of GNU EFI
...
ACPICA commit 3b1026e0bdd3c32eb6d5d313f3ba0b1fee7597b4
ACPICA commit 00f0dc83f5cfca53b27a3213ae0d7719b88c2d6b
ACPICA commit 47d22a738d0e19fd241ffe4e3e9d4e198e4afc69
Across all of ACPICA. Replace C library macros such as ACPI_STRLEN with the
standard names such as strlen. The original purpose for these macros is
long since obsolete.
Also cast various invocations as necessary. Bob Moore, Jung-uk Kim, Lv Zheng.
Link: https://github.com/acpica/acpica/commit/3b1026e0
Link: https://github.com/acpica/acpica/commit/00f0dc83
Link: https://github.com/acpica/acpica/commit/47d22a73
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch updates acpidump manual according to the recent changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 04c3bd7e9d6aeb2b3edebe99c90dc271ae4e6353
In order to work without any additional option to dump tables when /dev/mem
doesn't exist, this patch switches the default behavior of acpidump to dump
from /sys/firmware/acpi/tables. Reported by Al Stone, Fixed by Lv Zheng.
Link: https://github.com/acpica/acpica/commit/04c3bd7e
Reported-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ab29013cfa2424140446aff196a70b211ab343a9
The /dev/mem can be configured out, in which case, acpidump should still
work with "-c" option as tables can be found in /sys/firmware/acpi/tables.
This patch allows acpidump to work without /dev/mem.
This patch has been tested with "acpidump -c" and "acpidump -c -n FADT".
And it worked as expected. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/ab29013c
Reported-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow to specify custom linker command. This fixes MIPS64 builds for
64-bit userspace as it will allow to pass a linker using the correct
linker flags for 64-bit ABI (by default GNU binutils ld will assume
N32).
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1435751683-18500-2-git-send-email-aaro.koskinen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create config.detected into OUTPUT directory instead of source
directory.
This fixes parallel builds that share the same source directory.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1435751683-18500-1-git-send-email-aaro.koskinen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435752499-11752-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435677525-28055-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435652124-22414-6-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435652124-22414-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error occur an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435652124-22414-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Missing switch break since introduction of new event:
c4937a91ea perf tools: handle PERF_RECORD_LOST_SAMPLES
Also removing unneeded break for PERF_RECORD_LOST_SAMPLES.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150629112745.GA21507@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
4 drivers / enabling modules:
NFIT:
Instantiates an "nvdimm bus" with the core and registers memory devices
(NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface
table). After registering NVDIMMs the NFIT driver then registers
"region" devices. A libnvdimm-region defines an access mode and the
boundaries of persistent memory media. A region may span multiple
NVDIMMs that are interleaved by the hardware memory controller. In
turn, a libnvdimm-region can be carved into a "namespace" device and
bound to the PMEM or BLK driver which will attach a Linux block device
(disk) interface to the memory.
PMEM:
Initially merged in v4.1 this driver for contiguous spans of persistent
memory address ranges is re-worked to drive PMEM-namespaces emitted by
the libnvdimm-core. In this update the PMEM driver, on x86, gains the
ability to assert that writes to persistent memory have been flushed all
the way through the caches and buffers in the platform to persistent
media. See memcpy_to_pmem() and wmb_pmem().
BLK:
This new driver enables access to persistent memory media through "Block
Data Windows" as defined by the NFIT. The primary difference of this
driver to PMEM is that only a small window of persistent memory is
mapped into system address space at any given point in time. Per-NVDIMM
windows are reprogrammed at run time, per-I/O, to access different
portions of the media. BLK-mode, by definition, does not support DAX.
BTT:
This is a library, optionally consumed by either PMEM or BLK, that
converts a byte-accessible namespace into a disk with atomic sector
update semantics (prevents sector tearing on crash or power loss). The
sinister aspect of sector tearing is that most applications do not know
they have a atomic sector dependency. At least today's disk's rarely
ever tear sectors and if they do one almost certainly gets a CRC error
on access. NVDIMMs will always tear and always silently. Until an
application is audited to be robust in the presence of sector-tearing
the usage of BTT is recommended.
Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
Wysocki, and Bob Moore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VtWG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm
Pull libnvdimm subsystem from Dan Williams:
"The libnvdimm sub-system introduces, in addition to the
libnvdimm-core, 4 drivers / enabling modules:
NFIT:
Instantiates an "nvdimm bus" with the core and registers memory
devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
Interface table).
After registering NVDIMMs the NFIT driver then registers "region"
devices. A libnvdimm-region defines an access mode and the
boundaries of persistent memory media. A region may span multiple
NVDIMMs that are interleaved by the hardware memory controller. In
turn, a libnvdimm-region can be carved into a "namespace" device and
bound to the PMEM or BLK driver which will attach a Linux block
device (disk) interface to the memory.
PMEM:
Initially merged in v4.1 this driver for contiguous spans of
persistent memory address ranges is re-worked to drive
PMEM-namespaces emitted by the libnvdimm-core.
In this update the PMEM driver, on x86, gains the ability to assert
that writes to persistent memory have been flushed all the way
through the caches and buffers in the platform to persistent media.
See memcpy_to_pmem() and wmb_pmem().
BLK:
This new driver enables access to persistent memory media through
"Block Data Windows" as defined by the NFIT. The primary difference
of this driver to PMEM is that only a small window of persistent
memory is mapped into system address space at any given point in
time.
Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
different portions of the media. BLK-mode, by definition, does not
support DAX.
BTT:
This is a library, optionally consumed by either PMEM or BLK, that
converts a byte-accessible namespace into a disk with atomic sector
update semantics (prevents sector tearing on crash or power loss).
The sinister aspect of sector tearing is that most applications do
not know they have a atomic sector dependency. At least today's
disk's rarely ever tear sectors and if they do one almost certainly
gets a CRC error on access. NVDIMMs will always tear and always
silently. Until an application is audited to be robust in the
presence of sector-tearing the usage of BTT is recommended.
Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
Wysocki, and Bob Moore"
* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
arch, x86: pmem api for ensuring durability of persistent memory updates
libnvdimm: Add sysfs numa_node to NVDIMM devices
libnvdimm: Set numa_node to NVDIMM devices
acpi: Add acpi_map_pxm_to_online_node()
libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
pmem: flag pmem block devices as non-rotational
libnvdimm: enable iostat
pmem: make_request cleanups
libnvdimm, pmem: fix up max_hw_sectors
libnvdimm, blk: add support for blk integrity
libnvdimm, btt: add support for blk integrity
fs/block_dev.c: skip rw_page if bdev has integrity
libnvdimm: Non-Volatile Devices
tools/testing/nvdimm: libnvdimm unit test infrastructure
libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
nd_btt: atomic sector updates
libnvdimm: infrastructure for btt devices
libnvdimm: write blk label set
libnvdimm: write pmem label set
libnvdimm: blk labels and namespace instantiation
...
This update adds two new test suites: futex and seccomp.
In addition, it includes fixes for bugs in timers, other
tests, and compile framework. It introduces new quicktest
feature to enable users to choose to run tests that complete
in a short time..
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=co5w
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This update adds two new test suites: futex and seccomp.
In addition, it includes fixes for bugs in timers, other tests, and
compile framework. It introduces new quicktest feature to enable
users to choose to run tests that complete in a short time"
* tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: add quicktest support
selftests: add seccomp suite
selftest, x86: fix incorrect comment
tools selftests: Fix 'clean' target with make 3.81
selftests/futex: Add .gitignore
kselftest: Add exit code defines
selftests: Add futex tests to the top-level Makefile
selftests/futex: Increment ksft pass and fail counters
selftests/futex: Update Makefile to use lib.mk
selftests: Add futex functional tests
kselftests: timers: Check _ALARM clockids are supported before suspending
kselftests: timers: Ease alarmtimer-suspend unreasonable latency value
kselftests: timers: Increase delay between suspends in alarmtimer-suspend
selftests/exec: do not install subdir as it is already created
selftests/ftrace: install test.d
selftests: copy TEST_DIRS to INSTALL_PATH
Test compaction of mlocked memory
selftests/mount: output WARN messages when mount test skipped
selftests/timers: Make git ignore all binaries in timers test suite
Here's the big, really big, staging tree patches for 4.2-rc1.
Loads of stuff in here, almost all just coding style fixes / churn, and
a few new drivers as well, one of which I just disabled from the build a
few minutes ago due to way too many build warnings.
Other than the one "disable this driver" patch, all of these have been
in linux-next for quite a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlWNpc0ACgkQMUfUDdst+ym8EgCg0pL1Qcf9Se3jAc96fLt+itpv
Rd0AoI9uJcq8Qm7d+IXnz3ojLnN9xvN3
=xt0u
-----END PGP SIGNATURE-----
Merge tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big, really big, staging tree patches for 4.2-rc1.
Loads of stuff in here, almost all just coding style fixes / churn,
and a few new drivers as well, one of which I just disabled from the
build a few minutes ago due to way too many build warnings.
Other than the one "disable this driver" patch, all of these have been
in linux-next for quite a while with no reported issues"
* tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits)
staging: wilc1000: disable driver due to build warnings
Staging: rts5208: fix CHANGE_LINK_STATE value
Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis
Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines
Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators
Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs
Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters
Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs
Staging: sm750fb: modedb.h: Shorten lines to under 80 characters
Staging: sm750fb: modedb.h: Replace spaces with tabs
staging: comedi: addi_apci_3120: rename 'this_board' variables
staging: comedi: addi_apci_1516: rename 'this_board' variables
staging: comedi: ni_atmio: cleanup ni_getboardtype()
staging: comedi: vmk80xx: sanity check context used to get the boardinfo
staging: comedi: vmk80xx: rename 'boardinfo' variables
staging: comedi: dt3000: rename 'this_board' variables
staging: comedi: adv_pci_dio: rename 'this_board' variables
staging: comedi: cb_pcidas64: rename 'thisboard' variables
staging: comedi: cb_pcidas: rename 'thisboard' variables
staging: comedi: me4000: rename 'thisboard' variables
...
Here's the big char/misc driver pull request for 4.2-rc1.
Lots of mei, extcon, coresight, uio, mic, and other driver updates in
here. Full details in the shortlog. All of these have been in
linux-next for some time with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlWNn0gACgkQMUfUDdst+ykCCQCgvdF4F2+Hy9+RATdk22ak1uq1
JDMAoJTf4oyaIEdaiOKfEIWg9MasS42B
=H5wD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver pull request for 4.2-rc1.
Lots of mei, extcon, coresight, uio, mic, and other driver updates in
here. Full details in the shortlog. All of these have been in
linux-next for some time with no reported problems"
* tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits)
mei: me: wait for power gating exit confirmation
mei: reset flow control on the last client disconnection
MAINTAINERS: mei: add mei_cl_bus.h to maintained file list
misc: sram: sort and clean up included headers
misc: sram: move reserved block logic out of probe function
misc: sram: add private struct device and virt_base members
misc: sram: report correct SRAM pool size
misc: sram: bump error message level on unclean driver unbinding
misc: sram: fix device node reference leak on error
misc: sram: fix enabled clock leak on error path
misc: mic: Fix reported static checker warning
misc: mic: Fix randconfig build error by including errno.h
uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config
uio: pruss: Add CONFIG_HAS_IOMEM dependence
uio: pruss: Include <linux/sizes.h>
extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration().
Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion
parport: check exclusive access before register
w1: use correct lock on error in w1_seq_show()
...
"monitonic raw". Also some enhancements to make the ring buffer even
faster. But the biggest and most noticeable change is the renaming of
the ftrace* files, structures and variables that have to deal with
trace events.
Over the years I've had several developers tell me about their confusion
with what ftrace is compared to events. Technically, "ftrace" is the
infrastructure to do the function hooks, which include tracing and also
helps with live kernel patching. But the trace events are a separate
entity altogether, and the files that affect the trace events should
not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled()-> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not heard
a single complaint about this rename breaking anything. Mostly because
these functions, variables and structures are mostly internal to the
tracing system and are seldom (if ever) used by anything external to that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJViYhVAAoJEEjnJuOKh9ldcJ0IAI+mytwoMAN/CWDE8pXrTrgs
aHlcr1zorSzZ0Lq6lKsWP+V0VGVhP8KWO16vl35HaM5ZB9U+cDzWiGobI8JTHi/3
eeTAPTjQdgrr/L+ZO1ApzS1jYPhN3Xi5L7xublcYMJjKfzU+bcYXg/x8gRt0QbG3
S9QN/kBt0JIIjT7McN64m5JVk2OiU36LxXxwHgCqJvVCPHUrriAdIX7Z5KRpEv13
zxgCN4d7Jiec/FsMW8dkO0vRlVAvudZWLL7oDmdsvNhnLy8nE79UOeHos2c1qifQ
LV4DeQ+2Hlu7w9wxixHuoOgNXDUEiQPJXzPc/CuCahiTL9N/urQSGQDoOVMltR4=
=hkdz
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This patch series contains several clean ups and even a new trace
clock "monitonic raw". Also some enhancements to make the ring buffer
even faster. But the biggest and most noticeable change is the
renaming of the ftrace* files, structures and variables that have to
deal with trace events.
Over the years I've had several developers tell me about their
confusion with what ftrace is compared to events. Technically,
"ftrace" is the infrastructure to do the function hooks, which include
tracing and also helps with live kernel patching. But the trace
events are a separate entity altogether, and the files that affect the
trace events should not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not
heard a single complaint about this rename breaking anything. Mostly
because these functions, variables and structures are mostly internal
to the tracing system and are seldom (if ever) used by anything
external to that"
* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
ring_buffer: Allow to exit the ring buffer benchmark immediately
ring-buffer-benchmark: Fix the wrong type
ring-buffer-benchmark: Fix the wrong param in module_param
ring-buffer: Add enum names for the context levels
ring-buffer: Remove useless unused tracing_off_permanent()
ring-buffer: Give NMIs a chance to lock the reader_lock
ring-buffer: Add trace_recursive checks to ring_buffer_write()
ring-buffer: Allways do the trace_recursive checks
ring-buffer: Move recursive check to per_cpu descriptor
ring-buffer: Add unlikelys to make fast path the default
tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
tracing: Rename ftrace_event_name() to trace_event_name()
tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
...
Upon detection of an unarmed dimm in a region, arrange for descendant
BTT, PMEM, or BLK instances to be read-only. A dimm is primarily marked
"unarmed" via flags passed by platform firmware (NFIT).
The flags in the NFIT memory device sub-structure indicate the state of
the data on the nvdimm relative to its energy source or last "flush to
persistence". For the most part there is nothing the driver can do but
advertise the state of these flags in sysfs and emit a message if
firmware indicates that the contents of the device may be corrupted.
However, for the case of ACPI_NFIT_MEM_ARMED, the driver can arrange for
the block devices incorporating that nvdimm to be marked read-only.
This is a safe default as the data is still available and new writes are
held off until the administrator either forces read-write mode, or the
energy source becomes armed.
A 'read_only' attribute is added to REGION devices to allow for
overriding the default read-only policy of all descendant block devices.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
'libnvdimm' is the first driver sub-system in the kernel to implement
mocking for unit test coverage. The nfit_test module gets built as an
external module and arranges for external module replacements of nfit,
libnvdimm, nd_pmem, and nd_blk. These replacements use the linker
--wrap option to redirect calls to ioremap() + request_mem_region() to
custom defined unit test resources. The end result is a fully
functional nvdimm_bus, as far as userspace is concerned, but with the
capability to perform otherwise destructive tests on emulated resources.
Q: Why not use QEMU for this emulation?
QEMU is not suitable for unit testing. QEMU's role is to faithfully
emulate the platform. A unit test's role is to unfaithfully implement
the platform with the goal of triggering bugs in the corners of the
sub-system implementation. As bugs are discovered in platforms, or the
sub-system itself, the unit tests are extended to backstop a fix with a
reproducer unit test.
Another problem with QEMU is that it would require coordination of 3
software projects instead of 2 (kernel + libndctl [1]) to maintain and
execute the tests. The chances for bit rot and the difficulty of
getting the tests running goes up non-linearly the more components
involved.
Q: Why submit this to the kernel tree instead of external modules in
libndctl?
Simple, to alleviate the same risk that out-of-tree external modules
face. Updates to drivers/nvdimm/ can be immediately evaluated to see if
they have any impact on tools/testing/nvdimm/.
Q: What are the negative implications of merging this?
It is a unique maintenance burden because the purpose of mocking an
interface to enable a unit test is to purposefully short circuit the
semantics of a routine to enable testing. For example
__wrap_ioremap_cache() fakes the pmem driver into "ioremap()'ing" a test
resource buffer allocated by dma_alloc_coherent(). The future
maintenance burden hits when someone changes the semantics of
ioremap_cache() and wonders what the implications are for the unit test.
[1]: https://github.com/pmem/ndctl
Cc: <linux-acpi@vger.kernel.org>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There 2 problems when reading symbols files:
* It doesn't report any errors even if when users specify symbol
files which don't exist with --kallsyms or --vmlinux. The result
just shows the address without symbols, which is not what is expected.
So it's better to report errors and exit the program.
* When using command perf report --kallsyms=/proc/kallsyms with a
non-root user, symbols are resolved. Then select one symbol and
annotate it, it reports the error as the following:
Can't annotate __clear_user: No vmlinux file with build id xxx was
found.
The problem is caused by reading /proc/kcore without access permission.
/proc/kcore requires CAP_SYS_RAWIO capability to access, so it needs to
change access permission to allow a specific user to read /proc/kcore or
use root to execute the perf command.
This patch is to report errors when symbol files specified by users
don't exist. And check access permission of /proc/kcore when reading it.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1434704253-2632-1-git-send-email-zhlcindy@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently all the -p option PID arguments tasks values get aggregated
and printed as single values.
Adding --per-tasks option to print values per task.
$ perf stat -e cycles,instructions --per-thread -p 30190,30242
^C
Performance counter stats for process id '30190,30242':
cat-30190 0 cycles
yes-30242 3,842,525,421 cycles
cat-30190 0 instructions
yes-30242 10,370,817,010 instructions
1.143155657 seconds time elapsed
Also works under interval mode:
$ perf stat -e cycles,instructions --per-thread -p 30190,30242 -I 1000
# time comm-pid counts unit events
1.000073435 cat-30190 89,058 cycles
1.000073435 yes-30242 3,360,786,902 cycles (100.00%)
1.000073435 cat-30190 14,066 instructions
1.000073435 yes-30242 9,069,937,462 instructions
2.000204830 cat-30190 0 cycles
2.000204830 yes-30242 3,351,667,626 cycles
2.000204830 cat-30190 0 instructions
2.000204830 yes-30242 9,045,796,885 instructions
^C 2.771286639 cat-30190 0 cycles
2.771286639 yes-30242 2,593,884,166 cycles
2.771286639 cat-30190 0 instructions
2.771286639 yes-30242 7,001,171,191 instructions
It works only with -t and -p options, otherwise following error is
printed:
$ perf stat -e cycles --per-thread -I 1000 ls
The --per-thread option is only available when monitoring via -p -t options.
-p, --pid <pid> stat events on existing process id
-t, --tid <tid> stat events on existing thread id
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The init_stats function is meant to init 'struct stats'.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-21-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It suits better, because the function also reads counter's data.
Also the 'print_interval' name will be used in following generalization
of counters display.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-20-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving perf_stat initialization counter process code,
to make the reading path free of processing logic.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-18-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving zero_per_pkg into counter process code,
to make the reading path free of processing logic.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating counters reading and processing so we could use the
processing part in following patches.
Using simple reading via perf_evsel__read function to read counters now,
because part of the processing was in the read_cb callback.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving read counters logic into single read_counters function, which
will be called for both interval and overall processing legs.
The reason is to split reading and processing (following patches)
counters code, so we could read counters from other sources (like
perf.data) and process them in the same way as 'perf stat' command does.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-15-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding simple read function that reads/store data into given struct
perf_counts_values *count object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move all stat allocation logic related to stat object under single
function. This way we can use it separately for stat object out of
evlist object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving perf_evlist__(alloc|free|reset)_stats into stat object,
so it could be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving perf_evsel__(alloc|free)_prev_raw_counts into stat object, so it
could be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving perf_evsel__(alloc|free|reset)_stat_priv into stat object, so it
could be used outside stat command in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To fit in with the rest of the helpers (alloc and free).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming 'struct xyarray *cpu' pointer to more fitting/generic values,
because now we store both cpu and thread values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have space for thread dimension counts, let's store it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switching single dimensional array of 'struct perf_counts_values'
with xyarray object, so we could store thread dimension counts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing perf_counts function, that returns
'struct perf_counts_values' pointer for given cpu.
Also moving perf_counts* structures into stat.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding thread_map object tests for comm name values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to hold comm name together with pids in 'struct
thread_map'. It will be useful for --per-thread option to display task
pid together with task name.
Adding thread_map__read_comms function that reads/set
comm string for the 'struct thread_map'.
Getting the task name from /proc/$pid/comm.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to reset newly allocated 'struct thread_map_data' entries,
because we will introduce new comm memeber, which will get set later or
not at all.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435310967-14570-2-git-send-email-jolsa@kernel.org
[ Use sizeof(map->map[0]) to be independent of the array entry type ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'trace' tool was accepting any names passed and just looking if
syscalls returned via the raw_syscalls:* tracepoints were in that list,
leading to it accepting perf events and then never finding any, as those
are not valid syscall names, confusing users.
Fix it by checking each entry in the list using audit_name_to_syscall,
telling the user which entries are invalid and suggesting where to look
for valid syscall names.
E.g:
[root@zoo ~]# trace -e open,foo,bar,close,baz
Error: Invalid syscall bar, baz, foo
Hint: try 'perf list syscalls:sys_enter_*'
Hint: and: 'man syscalls'
[root@zoo ~]#
Reported-by: Flavio Leitner <fbl@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-4g1i3m1z6fzsrznn2umi02wa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Infrastructure:
- Reference count the cpu_map and thread_map classes. (Jiri Olsa)
- Set evsel->{cpus,threads} from the evlist, if not set,
allowing the generalization of some 'perf stat' functions that
previously were accessing private static evlist variable. (Jiri Olsa)
- Delete an unnecessary check before the calling
free_event_desc() (Markus Elfring)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ztqK
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and refactorings from Arnaldo Carvalho de Melo:
Infrastructure changes:
- Reference count the cpu_map and thread_map classes. (Jiri Olsa)
- Set evsel->{cpus,threads} from the evlist, if not set,
allowing the generalization of some 'perf stat' functions that
previously were accessing private static evlist variable. (Jiri Olsa)
- Delete an unnecessary check before the calling
free_event_desc() (Markus Elfring)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because we now propagate all evlist's cpu_maps and thread_map objects
through all evsels, the perf_evsel__(nr_)cpus no longer need to be
specific to stat object and check evlist and target objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Propagate evlist's thread_map object through all the evsel objects.
It'll be handy to access evsel's threads directly in following patches.
The reason is there's no link from evsel to evlist which hold threads
map now and evlist is not always available.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Propagate evlist's cpu_map object through all the evsel objects, while
keeping already configured evsel->cpus.
It'll be handy to access evsel's cpus directly in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding reference counting for thread_map object, so it could be easily
shared among other objects.
Using thread_map__put instead thread_map__delete and making
thread_map__delete static.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-5-git-send-email-jolsa@kernel.org
[ Adjustments to move it ahead of the "comm" patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding refference counting for cpu_map object, so it could be easily
shared among other objects.
Using cpu_map__put instead cpu_map__delete and making cpu_map__delete
static.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The free_event_desc() function tests whether its argument is NULL and
then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/558C2ABA.3000603@users.sourceforge.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With commit: e1e455f4f4 (perf tools: Work around lack of sched_getcpu
in glibc < 2.6), perf_bench numa mem with -c or -m option is not able to
correctly calculate convergence.
With the above commit, sched_getcpu always seems to return -1. The
intention of commit e1e455f was to add a sched_getcpu in glibc < 2.6.
Hence keep the sched_getcpu definition under an ifdef.
This regression happened occurred between v4.0 and v4.1
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vinson Lee <vlee@twitter.com>
Fixes: e1e455f4f4 ("perf tools: Work around lack of sched_getcpu in glibc < 2.6")
Link: http://lkml.kernel.org/r/20150624111004.GA5220@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Move toggling event logic from 'perf top' and into hists browser, allowing
freeze/unfreeze with event lists with more than one entry (Namhyung Kim)
- Add missing newlines when dumping PERF_RECORD_FINISHED_ROUND and
showing the Aggregated stats in 'perf report -D' (Adrian Hunter)
Infrastructure:
- Allow auxtrace data alignment (Adrian Hunter)
- Allow events with dot (Andi Kleen)
- Fix failure to 'perf probe' events on arm (He Kuang)
- Add testing for Makefile.perf (Jiri Olsa)
- Add test for make install with prefix (Jiri Olsa)
- Fix single target build dependency check (Jiri Olsa)
- Access thread_map entries via accessors, prep patch to hold more info per
entry, for ongoing 'perf stat --per-thread' work (Jiri Olsa)
- Use __weak definition from compiler.h (Sukadev Bhattiprolu)
- Split perf_pmu__new_alias() (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0d3E
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Move toggling event logic from 'perf top' and into hists browser, allowing
freeze/unfreeze with event lists with more than one entry (Namhyung Kim)
- Add missing newlines when dumping PERF_RECORD_FINISHED_ROUND and
showing the Aggregated stats in 'perf report -D' (Adrian Hunter)
Infrastructure changes:
- Allow auxtrace data alignment (Adrian Hunter)
- Allow events with dot (Andi Kleen)
- Fix failure to 'perf probe' events on arm (He Kuang)
- Add testing for Makefile.perf (Jiri Olsa)
- Add test for make install with prefix (Jiri Olsa)
- Fix single target build dependency check (Jiri Olsa)
- Access thread_map entries via accessors, prep patch to hold more info per
entry, for ongoing 'perf stat --per-thread' work (Jiri Olsa)
- Use __weak definition from compiler.h (Sukadev Bhattiprolu)
- Split perf_pmu__new_alias() (Sukadev Bhattiprolu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The main thing here is Ingo's big subdirectory documenting feature support
for each architecture. Beyond that, it's the usual pile of fixes, tweaks,
and small additions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ODt8
-----END PGP SIGNATURE-----
Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation updates from Jonathan Corbet:
"The main thing here is Ingo's big subdirectory documenting feature
support for each architecture. Beyond that, it's the usual pile of
fixes, tweaks, and small additions"
* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (79 commits)
doc:md: fix typo in md.txt.
Documentation/mic/mpssd: don't build x86 userspace when cross compiling
Documentation/prctl: don't build tsc tests when cross compiling
Documentation/vDSO: don't build tests when cross compiling
Doc:ABI/testing: Fix typo in sysfs-bus-fcoe
Doc: Docbook: Change wikipedia's URL from http to https in scsi.tmpl
Doc: Change wikipedia's URL from http to https
Documentation/kernel-parameters: add missing pciserial to the earlyprintk
Doc:pps: Fix typo in pps.txt
kbuild : Fix documentation of INSTALL_HDR_PATH
Documentation: filesystems: updated struct file_operations documentation in vfs.txt
kbuild: edit explanation of clean-files variable
Doc: ja_JP: Fix typo in HOWTO
Move freefall program from Documentation/ to tools/
Documentation: ARM: EXYNOS: Describe boot loaders interface
Doc:nfc: Fix typo in nfc-hci.txt
vfs: Minor documentation fix
Doc: networking: txtimestamp: fix printf format warning
Documentation, intel_pstate: Improve legacy mode internal governors description
Documentation: extend use case for EXPORT_SYMBOL_GPL()
...
Pull networking updates from David Miller:
1) Add TX fast path in mac80211, from Johannes Berg.
2) Add TSO/GRO support to ibmveth, from Thomas Falcon
3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.
4) Lots of new rhashtable tests, from Thomas Graf.
5) Run ingress qdisc lockless, from Alexei Starovoitov.
6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.
7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.
8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.
9) Move page frag allocator under mm/, also from Alexander.
10) Add xmit_more support to hv_netvsc, from KY Srinivasan.
11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.
12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.
13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.
14) Add netdev driver for GENEVE tunnels, from John W Linville.
15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.
16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.
17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.
18) Add tail call support to BPF, from Alexei Starovoitov.
19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.
20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.
21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.
22) Add Cavium ThunderX driver, from Sunil Goutham.
23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.
24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.
25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.
26) Add more entropy inputs to flow dissector, from Tom Herbert.
27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.
28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.
29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...
- Disable the 32-bit vdso when building LE, so we can build with a 64-bit only
toolchain.
- EEH fixes from Gavin & Richard.
- Enable the sys_kcmp syscall from Laurent.
- Sysfs control for fastsleep workaround from Shreyas.
- Expose OPAL events as an irq chip by Alistair.
- MSI ops moved to pci_controller_ops by Daniel.
- Fix for kernel to userspace backtraces for perf from Anton.
- Merge pseries and pseries_le defconfigs from Cyril.
- CXL in-kernel API from Mikey.
- OPAL prd driver from Jeremy.
- Fix for DSCR handling & tests from Anshuman.
- Powernv flash mtd driver from Cyril.
- Dynamic DMA Window support on powernv from Alexey.
- LLVM clang fixes & workarounds from Anton.
- Reworked version of the patch to abort syscalls when transactional.
- Fix the swap encoding to support 4TB, from Aneesh.
- Various fixes as usual.
- Freescale updates from Scott: Highlights include more 8xx optimizations, an
e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and
various fixes and cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=d9Wh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- disable the 32-bit vdso when building LE, so we can build with a
64-bit only toolchain.
- EEH fixes from Gavin & Richard.
- enable the sys_kcmp syscall from Laurent.
- sysfs control for fastsleep workaround from Shreyas.
- expose OPAL events as an irq chip by Alistair.
- MSI ops moved to pci_controller_ops by Daniel.
- fix for kernel to userspace backtraces for perf from Anton.
- merge pseries and pseries_le defconfigs from Cyril.
- CXL in-kernel API from Mikey.
- OPAL prd driver from Jeremy.
- fix for DSCR handling & tests from Anshuman.
- Powernv flash mtd driver from Cyril.
- dynamic DMA Window support on powernv from Alexey.
- LLVM clang fixes & workarounds from Anton.
- reworked version of the patch to abort syscalls when transactional.
- fix the swap encoding to support 4TB, from Aneesh.
- various fixes as usual.
- Freescale updates from Scott: Highlights include more 8xx
optimizations, an e6500 hugetlb optimization, QMan device tree nodes,
t1024/t1023 support, and various fixes and cleanup.
* tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits)
cxl: Fix typo in debug print
cxl: Add CXL_KERNEL_API config option
powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma()
powerpc/mm: Change the swap encoding in pte.
powerpc/mm: PTE_RPN_MAX is not used, remove the same
powerpc/tm: Abort syscalls in active transactions
powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off
powerpc/include: Add opal-prd to installed uapi headers
powerpc/powernv: fix construction of opal PRD messages
powerpc/powernv: Increase opal-irqchip initcall priority
powerpc: Make doorbell check preemption safe
powerpc/powernv: pnv_init_idle_states() should only run on powernv
macintosh/nvram: Remove as unused
powerpc: Don't use gcc specific options on clang
powerpc: Don't use -mno-strict-align on clang
powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it
powerpc: Only use -mabi=altivec if toolchain supports it
powerpc: Fix duplicate const clang warning in user access code
vfio: powerpc/spapr: Support Dynamic DMA windows
vfio: powerpc/spapr: Register memory and define IOMMU v2
...
Allow auxtrace data to be a multiple of something other than page size.
That is needed for BTS where the buffer contains 24-byte records.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to store command names with the pid. Changing map entries to be
a struct holding pid. Process name is coming in shortly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-2-git-send-email-jolsa@kernel.org
[ Split providing the set/get accessors from transforming the entries structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead provide a method to set the array entries, and another to access
the contents.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-2-git-send-email-jolsa@kernel.org
[ Split providing the set/get accessors from transforming the entries structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix failure to probe events on arm, the problem was introduced by commit
5a51fcd1f3 ("perf probe: Skip kernel symbols which is out of .text").
For some architectures, the '_etext' label is not in the .text section
(in the .notes section for arm/arm64). Labels out of the .text section
are not loaded as symbols and we get a zero value when looking up its
addresses, which causes all events to be wrongly skipped.
This patch skips checking the text address range when failing to get the
address of '_etext' and thus fixes the problem.
The problem can be reproduced on arm as follows:
# perf probe --add='generic_perform_write'
generic_perform_write+0 is out of .text, skip it.
Probe point 'generic_perform_write' not found.
Error: Failed to add events.
After this patch:
# perf probe --add='generic_perform_write'
Added new event:
probe:generic_perform_write (on generic_perform_write)
You can now use it in all perf tools, such as:
perf record -e probe:generic_perform_write -aR sleep 1
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1434595750-129791-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dumping events with 'perf report -D' the event print always starts
with a newline (see dump_event()).
Do the same with the "Aggregated stats" print so that it is not jammed
up against the last event print.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1435045969-15999-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With 'perf report -D' the PERF_RECORD_FINISHED_ROUND event was printed
without a newline, resulting in:
0x91a18 [0x8]: PERF_RECORD_FINISHED_ROUNDAggregated stats
Other events print their details, but PERF_RECORD_FINISHED_ROUND doesn't
have any so just add a print for a newline.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1435045969-15999-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Intel events use a dot to separate event name and unit mask. Allow
dot in names in the scanner, and remove special handling of dot as EOF.
Also remove the hack in jevents to replace dot with underscore. This way
dotted events can be specified directly by the user.
I'm not fully sure this change to the scanner is correct (what was the
dot special case good for?), but I haven't found anything that breaks
with it so far at least.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-8-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate the event parsing code in perf_pmu__new_alias() out into a
separate function __perf_pmu__new_alias() so that code can be called
indepdently.
This is based on an earlier patch from Andi Kleen.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-5-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa pointed out, that the <linux/compiler.h> defines the attribute
'__weak'. We might as well use that.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-4-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- ACPICA update to upstream revision 20150515 including basic
support for ACPI 6 features: new ACPI tables introduced by
ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
other tables (DTRM, FADT, LPIT, MADT), new predefined names
(_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
fixes and cleanups (Bob Moore, Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation
in Windows (Rafael J Wysocki).
- Rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling
of DMI quirks that may be involved in that and to make the
code generally more straightforward (Hans de Goede).
- Fixes for the ACPI Embedded Controller (EC) driver related to
the handling of EC transactions (Lv Zheng).
- Fix for a regression related to the ACPI resources management
and resulting from a recent change of ACPI initialization code
ordering (Rafael J Wysocki).
- Fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the
code that switches the platform over to the ACPI mode too
early in the initialization sequence (Rafael J Wysocki).
- Support for the ACPI _CCA device configuration object related
to DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- Cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- Fix for a long-standing issue causing General Protection Faults
to be generated occasionally on return to user space after resume
from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- Fix to make the suspend core code return -EBUSY consistently in
all cases when system suspend is aborted due to wakeup detection
(Ruchi Kandoi).
- Support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- New tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- Wakeup sources framework enhancements (Jin Qian).
- New macro for noirq system PM callbacks (Grygorii Strashko).
- Assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should
reduce the overhead of these operations quite a bit, unless the
CPU in question is physically going away (Viresh Kumar, Saravana
Kannan).
- Serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- New Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- Updates for the common clock operations support code in the PM
core (Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- Fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- Runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=7jTj
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision 20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision 20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
Add quicktest support to enable users to choose to run
tests that complete in a short time. Choosing this option
excludes tests that take longer time complete e.g: timers.
User can specify quicktest option from kernel top level or
selftests directory.
Kernel top level directory:
make quicktest=1 kselftest
tools/testing/selftests directory:
make quicktest=1 run_tests
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
Pull perf fixes from Ingo Molnar:
"These are the left over fixes from the v4.1 cycle"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix build breakage if prefix= is specified
perf/x86: Honor the architectural performance monitoring version
perf/x86/intel: Fix PMI handling for Intel PT
perf/x86/intel/bts: Fix DS area sharing with x86_pmu events
perf/x86: Add more Broadwell model numbers
perf: Fix ring_buffer_attach() RCU sync, again
Pull perf updates from Ingo Molnar:
"Kernel side changes mostly consist of work on x86 PMU drivers:
- x86 Intel PT (hardware CPU tracer) improvements (Alexander
Shishkin)
- x86 Intel CQM (cache quality monitoring) improvements (Thomas
Gleixner)
- x86 Intel PEBSv3 support (Peter Zijlstra)
- x86 Intel PEBS interrupt batching support for lower overhead
sampling (Zheng Yan, Kan Liang)
- x86 PMU scheduler fixes and improvements (Peter Zijlstra)
There's too many tooling improvements to list them all - here are a
few select highlights:
'perf bench':
- Introduce new 'perf bench futex' benchmark: 'wake-parallel', to
measure parallel waker threads generating contention for kernel
locks (hb->lock). (Davidlohr Bueso)
'perf top', 'perf report':
- Allow disabling/enabling events dynamicaly in 'perf top':
a 'perf top' session can instantly become a 'perf report'
one, i.e. going from dynamic analysis to a static one,
returning to a dynamic one is possible, to toogle the
modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo)
- Make Ctrl-C stop processing on TUI, allowing interrupting the load of big
perf.data files (Namhyung Kim)
'perf probe': (Masami Hiramatsu)
- Support glob wildcards for function name
- Support $params special probe argument: Collect all function arguments
- Make --line checks validate C-style function name.
- Add --no-inlines option to avoid searching inline functions
- Greatly speed up 'perf probe --list' by caching debuginfo.
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc.
'perf sched':
- Add option in 'perf sched' to merge like comms to lat output (Josef Bacik)
Plus tons of infrastructure work - in particular preparation for
upcoming threaded perf report support, but also lots of other work -
and fixes and other improvements. See (much) more details in the
shortlog and in the git log"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits)
perf tools: Configurable per thread proc map processing time out
perf tools: Add time out to force stop proc map processing
perf report: Fix sort__sym_cmp to also compare end of symbol
perf hists browser: React to unassigned hotkey pressing
perf top: Tell the user how to unfreeze events after pressing 'f'
perf hists browser: Honour the help line provided by builtin-{top,report}.c
perf hists browser: Do not exit when 'f' is pressed in 'report' mode
perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events
perf annotate: Rename source_line_percent to source_line_samples
perf annotate: Display total number of samples with --show-total-period
perf tools: Ensure thread-stack is flushed
perf top: Allow disabling/enabling events dynamicly
perf evlist: Add toggle_enable() method
perf trace: Fix race condition at the end of started workloads
perf probe: Speed up perf probe --list by caching debuginfo
perf probe: Show usage even if the last event is skipped
perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable
perf tools: Fix a problem when opening old perf.data with different byte order
perf tools: Ignore .config-detected in .gitignore
perf probe: Fix to return error if no probe is added
...
Pull RCU updates from Ingo Molnar:
- Continued initialization/Kconfig updates: hide most Kconfig options
from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single
interactive configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically. Later
on we'll remove this single leftover configuration option as well.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and
rcu_lockdep_assert()
- RCU CPU-hotplug cleanups
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes
- Documentation updates
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcutorture: Allow repetition factors in Kconfig-fragment lists
rcutorture: Display "make oldconfig" errors
rcutorture: Update TREE_RCU-kconfig.txt
rcutorture: Make rcutorture scripts force RCU_EXPERT
rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact
rcutorture: TASKS_RCU set directly, so don't explicitly set it
rcutorture: Test SRCU cleanup code path
rcutorture: Replace barriers with smp_store_release() and smp_load_acquire()
locktorture: Change longdelay_us to longdelay_ms
rcutorture: Allow negative values of nreaders to oversubscribe
rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug
rcutorture: Exchange TREE03 and TREE04 geometries
locktorture: fix deadlock in 'rw_lock_irq' type
rcu: Correctly handle non-empty Tiny RCU callback list with none ready
rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU
rcu: Further shrink Tiny RCU by making empty functions static inlines
rcu: Conditionally compile RCU's eqs warnings
rcu: Remove prompt for RCU implementation
rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO
rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF
...
Currently if we build a single target like:
$ touch util/map.c && make util/map.o
It will not rebuild util/map.o if it already exists and util/map.c is
modified.
The reason is that the top-level 'Makefile' processes util/map.o as an
implicit rule and if util/map.o exists make considers the 'util/map.o'
target as done and will not nest into Makefile.perf.
Adding FORCE for '%', because that's what we want to nest into
Makefile.perf for any target.
Adding Makefile into phony targets, because make tries to rebuild it and
it's also resolved as '%' target.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434977452-32520-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we test only builds through top level Makefile, but seems like
there's a bunch of users using Makefile.perf directly.
Changing the make suite to be run for Makefile.perf as well. It takes
now considerable amount of time, but hopefully we catch more issues.
Also fixing the output indentation for make_kernelsrc and
make_kernelsrc_tools tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434977452-32520-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current 'f' key action to enable/disable events won't work if there're
more than one event since perf_evsel_menu__run() doesn't return the key.
So move it to the hists browser loop so that it can be processed as like
other key action, and it's more natural to handle it there IMHO.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1434858076-6533-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
System wide sampling like 'perf top' or 'perf record -a' read all
threads /proc/xxx/maps before sampling. If there are any threads which
generating a keeping growing huge maps, perf will do infinite loop
during synthesizing. Nothing will be sampled.
This patch fixes this issue by adding per-thread timeout to force stop
this kind of endless proc map processing.
PERF_RECORD_MISC_PROC_MAP_PARSE_TIME_OUT is introduced to indicate that
the mmap record are truncated by time out. User will get warning
notification when truncated mmap records are detected.
Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using a map file from a JIT, due to memory reuse, we can obtain
multiple symbols with the same start address but a different length.
The symbols__find does check for the end so not doing it in
sort__sym_cmp was causing the hist_entry in the annotate part of a
report to match to the wrong entry, causing a fatal error.
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1434584470-17771-1-git-send-email-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When that happens we were just ignoring the key press, now this
message is presented in the bottom line (the help line):
"Press '?' for help on key bindings"
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the user presses 'f' to disable events the visual cues are, well,
the percentages not changing and the number of events freezing.
Be more explicit by changing the help line at the bottom of the screen
to show the following messages when 'f' is pressed:
"Press 'f' again to re-enable the events"
And then, when 'f' is pressed again:
"Press 'f' to disable the events or 'h'
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uhiswg9a9rxm5gxg7ptjskjn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists_browser was replacing whatever helpline provided by 'top' or
'report' with a static "Press '?' for help on key bindings", fix it.
Now the message passed by top appears at the bottom of the screen:
"For a higher level overview, try: perf top --sort comm,dso"
As well the message that will be added when the user presses 'f' to
disable the events, something along the lines of "press f again to
re-enable...".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'f' hotkey is only used when in 'top', dynamic mode, to
enable/disable events, currently not making sense in the 'report',
static mode, where we can't go from showing the histogram entries
created from a perf.data file to adding more events after recreating the
evlist created from the perf.data file, albeit possible, this is not
implemented right now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. 'freeze'/'unfreeze', this is because CTRL+z has a well known
action, i.e. suspend the app, perf needs to follow that convention, that
will be done on a separate patch, tho.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oedcl6ovohara4koig14ayip@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Invoking Makefile.perf with prefix= breaks the build since Makefile.perf
hands that variable down to Makefile.build where it overrides
prefix := $(subst ./,,$(OUTPUT)$(dir)/)
leading to errors like this:
No rule to make target '/usrabspath.o', needed by '/usrlibperf-in.o'
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Fixes: c819e2cf2e
Link: http://lkml.kernel.org/r/5582c48a.84a22b0a.a918.5285SMTPIN_ADDED_MISSING@mx.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To better reflect the purpose of this struct, that is to hold
info about samples, its total number and is percentage.
Cc: Martin Liska <mliska@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-6bf8gwcl975uurl0ttpvtk69@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To compare two records on an instruction base, with --show-total-period
option provided, display total number of samples that belong to a line
in assembly language.
New hot key 't' is introduced for 'perf annotate' TUI.
Signed-off-by: Martin Liska <mliska@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thread-stack represents a thread's current stack. When a thread
exits there can still be many functions on the stack e.g. exit() can be
called many levels deep, so all the callers will never return. To get
that information output, the thread-stack must be flushed.
Previously it was assumed the thread-stack would be flushed when the
struct thread was deleted. With thread ref-counting it is no longer
clear when that will be, if ever. So instead explicitly flush all the
thread-stacks at the end of a session.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the syscall handler to doom (tabort) active
transactions when a syscall is made and return very early without
performing the syscall and keeping side effects to a minimum (no CPU
accounting or system call tracing is performed). Also included is a
new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this
behaviour to userspace.
Currently, the system call instruction automatically suspends an
active transaction which causes side effects to persist when an active
transaction fails.
This does change the kernel's behaviour, but in a way that was
documented as unsupported. It doesn't reduce functionality as
syscalls will still be performed after tsuspend; it just requires that
the transaction be explicitly suspended. It also provides a
consistent interface and makes the behaviour of user code
substantially the same across powerpc and platforms that do not
support suspended transactions (e.g. x86 and s390).
Performance measurements using
http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of
a normal (non-aborted) system call increases by about 0.25%.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* pnp:
PNP / ACPI: use unsigned int in pnpacpi_encode_resources()
PNP / ACPI: use u8 instead of int in acpi_resource_extended_irq context
* pm-tools:
cpupower: mperf monitor: fix output in MAX_FREQ_SYSFS mode
In 0c4a5fc95b (Add leap-second timer edge testing to
leap-a-day.c), we added a timer to the test which checks to make
sure timers near the leapsecond edge behave correctly.
However, the output generated from the timer uses ctime_r, which
isn't async-signal safe, and should that signal land while the
main test is using ctime_r to print its output, its possible for
the test to deadlock on glibc internal locks.
Thus this patch reworks the output to avoid using ctime_r in
the signal handler.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434565003-3386-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This imports the existing seccomp test suite into the kernel's selftests
tree. It contains extensive testing of seccomp features and corner cases.
There remain additional tests to move into the kernel tree, but they have
not yet been ported to all the architectures seccomp supports:
https://github.com/redpig/seccomp/tree/master/tests
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Config TDP is a feature that allows parts to be configured
for different thermal limits after they have left the factory.
This can have an effect on the operation of the part,
particularly in determiniing...
Max Non-turbo Ratio
Turbo Activation Ratio
Signed-off-by: Len Brown <len.brown@intel.com>
Now it is possible to press CTRL+z at anytime and that will disable the
events being monitored, essentially turning 'top' into 'report', with
pressing CTRL+z again making it enable the events again, returning to
the 'top' behaviour, i.e. dynamic + decaying of older samples.
One may want, for instance, play with:
-d, --delay <n> number of seconds to delay between refreshes
and:
-z, --zero zero history across updates
Plus CTRL+z to see only the events since last zeroing, etc.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zq7tnh5462blt2yda0bcxh5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For an upcoming feature in 'perf top' we will have a hotkey to
enable/disable events, so remember if the events in the list are
enabled or disabled and allows toggling this state using a new
method.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-64c4jvdl5feg2zhimxvokqka@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I get following crash on multiple systems and across several releases
(at least since v3.18).
Core was generated by `/tmp/perf trace sleep 0.2 '.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
195 u64 head = ACCESS_ONCE(pc->data_head);
(gdb) bt
#0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
#1 perf_evlist__mmap_read (evlist=0x10027f11910, idx=<optimized out>)
at util/evlist.c:637
#2 0x000000001003ce4c in trace__run (argv=<optimized out>,
argc=<optimized out>, trace=0x3fffd7b28288) at builtin-trace.c:2259
#3 cmd_trace (argc=<optimized out>, argv=<optimized out>,
prefix=<optimized out>) at builtin-trace.c:2799
#4 0x00000000100657b8 in run_builtin (p=0x10176798 <commands+480>, argc=3,
argv=0x3fffd7b2b550) at perf.c:370
#5 0x00000000100063e8 in handle_internal_command (argv=0x3fffd7b2b550, argc=3)
at perf.c:429
#6 run_argv (argv=0x3fffd7b2af70, argcp=0x3fffd7b2af7c) at perf.c:473
#7 main (argc=3, argv=0x3fffd7b2b550) at perf.c:588
The problem seems to be a race condition, when the application has just
exited. Some/all fds associated with the perf-events (tracepoints) go
into a POLLHUP/ POLLERR state and the mmap region associated with those
events are unmapped (in perf_evlist__filter_pollfd()).
But we go back and do a perf_evlist__mmap_read() which assumes that the
mmaps are still valid and we hit the crash.
If the mapping for an event is released, its refcnt is 0 (and ->base
is NULL), so ensure we have non-zero refcount before accessing the map.
Note that perf-record has a similar logic but unlike perf-trace, the
record__mmap_read_all() checks the evlist->mmap[i].base before accessing
the map.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150612060003.GA19913@us.ibm.com
[ Fixed it up to use atomic_read() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Speed up the "perf probe --list" by caching the last used debuginfo.
perf probe --list always open and load debuginfo for each entry of probe
list. This takes very a long time.
E.g. with vfs_* events (total 96 probes)
[root@localhost perf]# time ./perf probe -l &> /dev/null
real 0m25.376s
user 0m24.381s
sys 0m1.012s
To solve this issue, this adds debuginfo_cache to cache the
last used debuginfo on memory.
With this fix, the perf-probe --list significantly improves
its speed.
[root@localhost perf]# time ./perf probe -l &> /dev/null
real 0m0.161s
user 0m0.136s
sys 0m0.025s
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150617145854.19715.15314.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the last part of converted events are blacklisted or out-of-text,
those are skipped and perf probe doesn't show usage examples. This
fixes it to show the example even if the last part of event list is
skipped.
E.g. without this patch, events are added, but suddenly end:
# perf probe vfs_*
vfs_caches_init_early is out of .text, skip it.
vfs_caches_init is out of .text, skip it.
Added new events:
probe:vfs_fallocate (on vfs_*)
probe:vfs_open (on vfs_*)
...
probe:vfs_dentry_acceptable (on vfs_*)
probe:vfs_load_quota_inode (on vfs_*)
#
With this fix:
# perf probe vfs_*
vfs_caches_init_early is out of .text, skip it.
vfs_caches_init is out of .text, skip it.
Added new events:
probe:vfs_fallocate (on vfs_*)
...
probe:vfs_load_quota_inode (on vfs_*)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_load_quota_inode -aR sleep 1
Note that this can be reproduced ONLY IF the vfs_caches_init* is the
last part of matched symbol list. I've checked this happens on
"3.19.0-generic #18-Ubuntu" kernel binary.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115057.19906.5502.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit e3d09ec812 ("tools lib traceevent:
Export dynamic symbols used by traceevent plugins") adds libtraceevent
dynamic list directly into LDFLAGS, which makes all targets depend on
that list through LDFLAGS.
This is not good since some of targets like libgtk.so doesn't use plugin
at all, but require the existance of that list because of linker
options.
This patch isolates the -Xlink option into LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS,
makes only perf and perf.so use it.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434552389-89144-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following error occurs when trying to use 'perf report' on x86_64 to
cross analysis a perf.data generated by an old perf on a big-endian
machine:
# perf report
*** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef]
/lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae]
/lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987]
/path/to/perf[0x4ac734]
/path/to/perf[0x4ac829]
/path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9]
/path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1]
/path/to/perf(perf_session__new+0x168)[0x4bd458]
/path/to/perf(cmd_report+0xfa0)[0x43eb70]
/path/to/perf[0x47adc3]
/path/to/perf(main+0x5f6)[0x42fd06]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5]
/path/to/perf[0x42fe35]
======= Memory map: ========
[SNIP]
The bug is in perf_event__attr_swap(). It swaps all fields in 'struct
perf_event_attr' without checking whether the swapped field exist or
not. In addition, in read_event_desc() allocs memory for attr according
to size read from perf.data.
Therefore, if the perf.data is collected by an old perf (without
aux_watermark, for example), when perf_event__attr_swap() swaping
attr->aux_watermark it destroy malloc's metadata.
This patch introduces boundary checking in perf_event__attr_swap(). It
adds macros bswap_field_64 and bswap_field_32 into
perf_event__attr_swap() to make it only swap exist fields.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --debug option reads a number of per-package MSRs.
Previously we explicitly read them on cpu0, but recently
turbostat changed to read them on the current "base_cpu".
Update the print-out to reflect base_cpu, rather than
the hard-coded cpu0.
Signed-off-by: Len Brown <len.brown@intel.com>
Commit fcfd6611fb ("tools build: Add
detected config support") dynamically creates .config-detected. Add it
to .gitignore.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434542358-5430-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix perf probe to return an error if no probe is added due to the given
probe point being on the blacklist.
To fix this problem, this moves the blacklist checking to right after
finding symbols/probe-points and marks them as skipped.
If all the symbols are skipped, "perf probe" returns an error as it
fails to find the corresponding probe address.
E.g. currently if a blacklisted probe is given:
# perf probe do_trap && echo 'succeed'
Added new event:
Warning: Skipped probing on blacklisted function: sync_regs
succeed
No! It must fail! With this patch, it correctly fails:
# perf probe do_trap && echo 'succeed'
do_trap is blacklisted function, skip it.
Probe point 'do_trap' not found.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115055.19906.31359.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libunwind is on, there is a compile error as :
util/unwind-libunwind.c:363:21: error: 'dso' undeclared (first use in this function)
dso__data_put_fd(dso);
This patch fixes it.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 4bb11d012a ("perf tools: Add dso__data_get/put_fd()")
Link: http://lkml.kernel.org/r/1434453395-10560-1-git-send-email-houpengyang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to have 'struct thread_map' allocation on single place and can
change it easily in following patch.
Using alloc|realloc for static helpers, because thread_map__new is
already used in public interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To zero all the xyarray contents. It will be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 5e17b28f1e ("perf probe: Add --quiet option to
suppress output result message") have replaced printf with pr_info,
perf probe -l outputs its result in stderr. However, that is not
what the commit expected.
E.g.:
# perf probe -l > /dev/null
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
With this fix:
# perf probe -l > list
# cat list
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
Of course, --quiet(-q) still works on --add/--del.
# perf probe -q vfs_write
# perf probe -l
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
probe:vfs_write (on vfs_write@ksrc/linux-3/fs/read_write.c)
-----
Reported-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150613013116.24402.2923.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make build-test' finds an error that make_python_perf_so fails due to
missing of libtraceevent-dynamic-list:
'.../python2' util/setup.py \
--quiet build_ext; \
mkdir -p python && \
cp python_ext_build/lib/perf.so python/
/path/to/ld: cannot open linker script file /path/to/kernel/tools/lib/traceevent/libtraceevent-dynamic-list: No such file or directory
collect2: error: ld returned 1 exit status
error: command 'x86_64-linux-gcc' failed with exit status 1
cp: cannot stat 'python_ext_build/lib/perf.so': No such file or directory
make[3]: *** [python/perf.so] Error 1
make[2]: *** [python/perf.so] Error 2
test: test -f ./python/perf.so
make[1]: *** [make_python_perf_so] Error 1
make: *** [build-test] Error 2
make: Leaving directory `/path/to/kernel/tools/perf'
This is caused by commit e3d09ec812
("tools lib traceevent: Export dynamic symbols used by traceevent
plugins") that, it adds the list file to LDFLAGS but forgot to add it to
dependency list of python/perf.so.
This patch fixes this problem.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434079031-123162-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use just reference counts, so that when no more hist_entry instances
references a map and the thread instance goes away by processing a
PERF_RECORD_EXIT, we can delete the maps.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oym7lfhcc7ss6xpz44h7nbxs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use more appropriate/common variable names:
* namepf instead of nameFile in iio_utils.c
* ret instead of retval in lsiio.c
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cut off the postfixes which gcc added for optimized routines from the
event name automatically generated from symbol name, since *probe-events
doesn't accept it. Those symbols will be used if we don't use debuginfo
to find target functions.
E.g. without this fix;
-----
# perf probe -va alloc_buf.isra.23
probe-definition(0): alloc_buf.isra.23
symbol:alloc_buf.isra.23 file:(null) line:0 offset:0 return:0 lazy:(null)
[...]
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: p:probe/alloc_buf.isra.23 _text+4869328
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
-----
With this fix;
-----
perf probe -va alloc_buf.isra.23
probe-definition(0): alloc_buf.isra.23
symbol:alloc_buf.isra.23 file:(null) line:0 offset:0 return:0 lazy:(null)
[...]
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: p:probe/alloc_buf _text+4869328
probe:alloc_buf (on alloc_buf.isra.23)
You can now use it in all perf tools, such as:
perf record -e probe:alloc_buf -aR sleep 1
-----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150612050820.20548.41625.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prarit reported an issue w/ timers around the leapsecond, where a
timer set for Midnight UTC (00:00:00) might fire a second early right
before the leapsecond (23:59:60 - though it appears as a repeated
23:59:59) is applied.
So I've updated the leap-a-day.c test to integrate a similar test,
where we set a timer and check if it triggers at the right time, and
if the ntp state transition is managed properly.
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434063297-28657-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Building perf out of kernel tree is currently broken because the
MANIFEST file refers to kernel files that have been removed. With this
patch make perf-targz-src-pkg succeeds as does building perf using the
generated tarfile.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1433526173-172332-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Failed in 32bit arch build like this:
CC /opt/h00206996/output/perf/arm32/builtin-record.o
util/session.c: In function ‘perf_session__warn_about_errors’:
util/session.c:1304:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’,
but argument 2 has type ‘long long unsigned int’ [-Werror=format=]
builtin-report.c: In function ‘perf_evlist__tty_browse_hists’:
builtin-report.c:323:2: error: format ‘%lu’ expects argument of type ‘long unsigned int’,
but argument 3 has type ‘u64’ [-Werror=format=]
Replace %lu format strings in warning message with PRIu64 for u64
'total_lost_samples' to fix this problem.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1434026664-71642-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat ignores the unsupported event and continue to count supported
event. But if the unsupported event is group leader, perf tool will
crash. After applying this patch, the unsupported group leader will
error out immediately.
Without this patch:
$ perf stat -x, -e '{node-prefetch-refs,cycles}' -- sleep 1
perf: util/evsel.c:1009: get_group_fd: Assertion `!(fd == -1)' failed.
Aborted (core dumped)
With this patch:
$ perf stat -x, -e '{node-prefetch-refs,cycles}' -- sleep 1
Error:
The node-prefetch-refs event is not supported.
Commiter note: Here I got a different output, but no core dump:
[acme@zoo linux]$ perf stat -x, -e '{node-prefetch-refs,cycles}' -- sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (node-prefetch-refs).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Link: http://lkml.kernel.org/r/1434004360-8570-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Given Linus announced a 4.8rc coming up, hopefully time for one more
lot of IIO patches this cycle. Some of these are actually
improvements / fixes for patches earlier in the cycle.
New device support
* st_accel driver - support devices with 8 bit channels.
Cleanup
* A general cleanup of the iio tools under /tools/ from Hartmut.
I'm more than a little embarassed by how bad some of these were! Are well,
much more refined and less bug prone now.
These cover lots of stuff like unhandled error returns, memory leaks as
well as general refactoring to tidy the code up.
* iio_simple_dummy - fix memory leaks in the init functions, drop some
pointless error returns from functions that never generate errors and
make the module parameter explicitly unsigned.
* More buffer handling reworks from Lars-Peter, this time targetting hardware
buffers (a little used corner that looks likely to get more use in the near
future). Specifically:
- Always compute the masklength as inkernel buffer users may need it.
- Add a means of labeling which buffer modes a given buffer implementation
supports.
- In the case of hardware buffers, require strict scan matching rather than
matching to a superset. Currently the demux is bypassed by these drivers
(this may well not change for efficiency reasons) so allowing a superset
of channels to be selected would otherwise lead to more data than requested
confusing userspace.
Driver funcationality improvments
* mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
own input driver.
* mma8452
- event support
- event debouncing
- high pass filter configuration
- triggers
* vf610 - allow conversion mode to be adjusted
Fixlets
* mmc35240
- Off by one error that by coincidence had no real effect.
- i2c_device_name should be lowercase.
- Lack of null terminator at end of attributes array.
- Avoid computing the fractional part of the magnetic field by moving
the scaling into userspace where floating point is available to simplify
the maths.
- Use a smaller sleep before assuming the measurement is done. This is
safe and improves the possible polling rate.
- Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
code and the value used in the code seems to be correct.
* stk3310 - make a local variable signed to ensure error handling works.
* twl4030
- fix calculation of the temperature sense current - bug unlikely
to have ever been noticed as the difference is small.
- Fix errors in descriptions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sNVc
-----END PGP SIGNATURE-----
Merge tag 'iio-for-v4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle.
Given Linus announced a 4.8rc coming up, hopefully time for one more
lot of IIO patches this cycle. Some of these are actually
improvements / fixes for patches earlier in the cycle.
New device support
* st_accel driver - support devices with 8 bit channels.
Cleanup
* A general cleanup of the iio tools under /tools/ from Hartmut.
I'm more than a little embarassed by how bad some of these were! Are well,
much more refined and less bug prone now.
These cover lots of stuff like unhandled error returns, memory leaks as
well as general refactoring to tidy the code up.
* iio_simple_dummy - fix memory leaks in the init functions, drop some
pointless error returns from functions that never generate errors and
make the module parameter explicitly unsigned.
* More buffer handling reworks from Lars-Peter, this time targetting hardware
buffers (a little used corner that looks likely to get more use in the near
future). Specifically:
- Always compute the masklength as inkernel buffer users may need it.
- Add a means of labeling which buffer modes a given buffer implementation
supports.
- In the case of hardware buffers, require strict scan matching rather than
matching to a superset. Currently the demux is bypassed by these drivers
(this may well not change for efficiency reasons) so allowing a superset
of channels to be selected would otherwise lead to more data than requested
confusing userspace.
Driver funcationality improvments
* mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
own input driver.
* mma8452
- event support
- event debouncing
- high pass filter configuration
- triggers
* vf610 - allow conversion mode to be adjusted
Fixlets
* mmc35240
- Off by one error that by coincidence had no real effect.
- i2c_device_name should be lowercase.
- Lack of null terminator at end of attributes array.
- Avoid computing the fractional part of the magnetic field by moving
the scaling into userspace where floating point is available to simplify
the maths.
- Use a smaller sleep before assuming the measurement is done. This is
safe and improves the possible polling rate.
- Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
code and the value used in the code seems to be correct.
* stk3310 - make a local variable signed to ensure error handling works.
* twl4030
- fix calculation of the temperature sense current - bug unlikely
to have ever been noticed as the difference is small.
- Fix errors in descriptions.
Because there's too many options and I cannot read, I frequently get
confused between -c and -P, and try to do things like:
perf record -P 50000 -- foo
Which does not work; try and make the option description slightly longer
and hopefully less confusing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150610144850.GP19282@twins.programming.kicks-ass.net
[ Do those changes on the man page as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use unique temporary files when copying to buildid dir to prevent races
in case multiple instances are trying to copy same file. This is done by
- creating template in form <path>/.<filename>.XXXXXX where the suffix is
used by mkstemp() to create unique file
- change file mode
- copy content
- if successful link temp file to target file
- unlink temp file
At this point the only file left at target path should be the desired
one either created by us or other instance if we raced. This should also
prevent not yet fully copied files to be visible to to other perf
instances that could try to parse them.
On top of that slow_copyfile no longer needs to deal with file mode when
creating file since temporary file is already created and mode is set.
Succesfully tested by myself by running perf record, archive and reading
the data on other system and by running perf buildid-cache on perf
binary itself. I also did revert fix from 0635b0f that to exposes
previously fixed race with EEXIST and recreator test passed sucessfully.
Signed-off-by: Milos Vyletel <milos@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This has a different model than the 'thread' and 'map' struct lifetimes:
there is not a definitive "don't use this DSO anymore" event, i.e. we may
get many 'struct map' holding references to the '/usr/lib64/libc-2.20.so'
DSO but then at some point some DSO may have no references but we still
don't want to straight away release its resources, because "soon" we may
get a new 'struct map' that needs it and we want to reuse its symtab or
other resources.
So we need some way to garbage collect it when crossing some memory
usage threshold, which is left for anoter patch, for now it is
sufficient to release it when calling dsos__exit(), i.e. when deleting
the whole list as part of deleting the 'struct machine' containing it,
which will leave only referenced objects being used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-majzgz07cm90t2tejrjy4clf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow concurrent access, next step: refcount struct dso instances, so
that we can ditch unused them when the last map pointing to it goes
away.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-yk1k08etpd2aoe3tnrf0oizn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling the function 'machine__new_module' implies a new 'module' will
be allocated, when in fact what is returned is a 'struct map' instance,
that not necessarily will be instantiated, as if one already exists with
the given module name, it will be returned instead.
So be consistent with other "find and if not there, create" like
functions, like machine__findnew_thread, machine__findnew_dso, etc, and
rename it to machine__findnew_module_map(), that in turn will call
machine__findnew_module_dso().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-acv830vd3hwww2ih5vjtbmu3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The size of perf.data is missing update in no-buildid mode, which gives
wrong output result.
Before this patch:
$ perf.perf record -B -e syscalls:sys_enter_open uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB perf.data ]
After this patch:
$ perf.perf record -B -e syscalls:sys_enter_open uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data ]
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819050-30511-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libtrace-dynamic-list file is used to export symbols used by
traceevent plugins.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819735-35040-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Traceevent plugins need dynamic symbols exported from libtraceevent.a,
otherwise a dlopen error will occur during plugins loading.
This patch uses dynamic-list-file to export dynamic symbols which will
be used in plugins to perf executable.
The problem is covered up if feature-libpython is enabled, because
PYTHON_EMBED_LDOPTS contains '-Xlinker --export-dynamic' which adds all
symbols to the dynamic symbol table. So we should reproduce the problem
by setting NO_LIBPYTHON=1.
Before this patch:
(Prepare plugins)
$ ls /root/.traceevent/plugins/
plugin_sched_switch.so
plugin_function.so
...
$ perf record -e 'ftrace:function' ls
$ perf script
Warning: could not load plugin '/mnt/data/root/.traceevent/plugins/plugin_sched_switch.so'
/root/.traceevent/plugins/plugin_sched_switch.so: undefined symbol: pevent_unregister_event_handler
Warning: could not load plugin '/root/.traceevent/plugins/plugin_function.so'
/root/.traceevent/plugins/plugin_function.so: undefined symbol: warning
...
:1049 1049 [000] 9666.754487: ftrace:function: ffffffff8118bc50 <-- ffffffff8118c5b3
:1049 1049 [000] 9666.754487: ftrace:function: ffffffff818e2440 <-- ffffffff8118bc75
:1049 1049 [000] 9666.754487: ftrace:function: ffffffff8106eee0 <-- ffffffff811212e2
After this patch:
$ perf record -e 'ftrace:function' ls
$ perf script
:1049 1049 [000] 9666.754487: ftrace:function: __set_task_comm
:1049 1049 [000] 9666.754487: ftrace:function: _raw_spin_lock
:1049 1049 [000] 9666.754487: ftrace:function: task_tgid_nr_ns
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819735-35040-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating shadow counters code into separate object as a cleanup, but
mainly for upcomming changes, so could use it from script command
context.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for moving shadow counters code into its own object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for moving shadow counters code into its own object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move shadow counters display code into separate function as preparation
for moving it into its own object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move shadow counters reset code into separate function
as preparation for moving it into its own object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's no longer needed, because we use nameid to recognize transaction
events.
Keeping it only in stat code to initialize transaction events.
I.e. struct perf_stat::id, accessible via evsel->priv, will be only set
for transaction related events.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can use already existing parse_events interface.
Both transaction_attrs and transaction_limited_attrs are changed to be
single strings.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using perf_stat::id to check for transaction events, instead of current
position based way.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need fast way to identify evsel as transaction event for shadow
counters computation. Currently we are using possition (in evlist) based
way.
Adding 'id' into 'struct perf_stat' so it can carry transaction event ID
and we can use it for shadow counters computations.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20150604135055.GB23625@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the perf tool to handle the new RECORD type,
PERF_RECORD_LOST_SAMPLES.
The number of lost-sample events is stored in
.nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples
which the kernel dropped is stored in total_lost_samples.
When the percentage of dropped samples is greater than 5%, a warning
is printed.
Here are some examples:
Eg 1, Recording different frequently-occurring events is safe with the
patch. Only a very low drop rate is associated with such actions.
$ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain
$ perf report -D | tail
SAMPLE events: 120243
MMAP2 events: 5
LOST_SAMPLES events: 24
FINISHED_ROUND events: 15
cycles:p stats:
TOTAL events: 59348
SAMPLE events: 59348
instructions:p stats:
TOTAL events: 60895
SAMPLE events: 60895
$ perf report --stdio --group
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 24
#
# Samples: 120K of event 'anon group { cycles:p, instructions:p }'
# Event count (approx.): 24048600000
#
# Overhead Command Shared Object Symbol
# ................ ........... ................
..................................
#
99.74% 99.86% tchain_edit tchain_edit [.] f3
0.09% 0.02% tchain_edit tchain_edit [.] f2
0.04% 0.00% tchain_edit [kernel.vmlinux] [k] ixgbe_read_reg
Eg 2, Recording the same thing multiple times can lead to high drop
rate, but it is not a useful configuration.
$ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain
Warning: Processed 600592 samples and lost 99.73% samples!
[perf record: Woken up 148 times to write data]
[perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)]
[perf record: Woken up 1 times to write data]
[perf record: Captured and wrote 0.121 MB perf.data (1629 samples)]
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds a new branch sampling type support for indirect jumps:
perf record -j ind_jmp .......
It enables analysis of indirect jumps targets. It requires kernel and
possibly hardware support to operate correctly.
Signed-off-by: Stephane Eranian <eranian@google.com>
[ Fixup against: f00898f4e2 (perf tools: Move branch option parsing to own file) ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: dsahern@gmail.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1431637800-31061-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This header containing all MSRs and respective bit definitions
got exported to userspace in conjunction with the big UAPI
shuffle.
But, it doesn't belong in the UAPI headers because userspace can
do its own MSR defines and exporting them from the kernel blocks
us from doing cleanups/renames in that header. Which is
ridiculous - it is not kernel's job to export such a header and
keep MSRs list and their names stable.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433436928-31903-19-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds .gitignore for all the newly added DSCR tests.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test to update the system wide DSCR value repeatedly
and then verifies that any thread on any given CPU on the system must be
able to see the same DSCR value whether its is being read through the
problem state based SPR or the privilege state based SPR.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This test continuously updates the system wide DSCR default value in the
sysfs interface and makes sure that the same is reflected across all the
sysfs interfaces for each individual CPUs present on the system.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test case to verify that the changed DSCR value inside
any process would be inherited to it's child across the fork and exec
system call.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test to verify that the changed DSCR value inside any
process would be inherited to it's child process across the fork system
call.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test which verifies that the DSCR privilege and
problem state SPR read & write accesses while making sure that the
results are always the same irrespective of which SPR number is being
used.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test which modifies the DSCR using mtspr instruction
and verifies the change using mfspr instruction. It uses both the
privilege state SPR as well as the problem state SPR for the purpose.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test case for the system wide DSCR default value,
which when changed through it's sysfs interface must be visible to all
threads reading DSCR either through the privilege state SPR or the
problem state SPR. The DSCR value change should be immediate as well.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- early_idt_handlers[] fix that fixes the build with bleeding edge
tooling
- build warning fix on GCC 5.1
- vm86 fix plus self-test to make it harder to break it again"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
x86/asm/entry/32, selftests: Add a selftest for kernel entries from VM86 mode
x86/boot: Add CONFIG_PARAVIRT_SPINLOCKS quirk to arch/x86/boot/compressed/misc.h
x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
Before patch ba92732e98 ('perf kmaps: Check kmaps to make code more
robust'), 'perf report' and 'perf annotate' will segfault if trace data
contains kernel module information like this:
# perf report -D -i ./perf.data
...
0 0 0x188 [0x50]: PERF_RECORD_MMAP -1/0: [0xffffffbff1018000(0xf068000) @ 0]: x [test_module]
...
# perf report -i ./perf.data --objdump=/path/to/objdump --kallsyms=/path/to/kallsyms
perf: Segmentation fault
-------- backtrace --------
/path/to/perf[0x503478]
/lib64/libc.so.6(+0x3545f)[0x7fb201f3745f]
/path/to/perf[0x499b56]
/path/to/perf(dso__load_kallsyms+0x13c)[0x49b56c]
/path/to/perf(dso__load+0x72e)[0x49c21e]
/path/to/perf(map__load+0x6e)[0x4ae9ee]
/path/to/perf(thread__find_addr_map+0x24c)[0x47deec]
/path/to/perf(perf_event__preprocess_sample+0x88)[0x47e238]
/path/to/perf[0x43ad02]
/path/to/perf[0x4b55bc]
/path/to/perf(ordered_events__flush+0xca)[0x4b57ea]
/path/to/perf[0x4b1a01]
/path/to/perf(perf_session__process_events+0x3be)[0x4b428e]
/path/to/perf(cmd_report+0xf11)[0x43bfc1]
/path/to/perf[0x474702]
/path/to/perf(main+0x5f5)[0x42de95]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7fb201f23bd4]
/path/to/perf[0x42dfc4]
This is because __kmod_path__parse treats '[' leading names as kernel
name instead of names of kernel module.
If perf.data contains build information and the buildid of such modules
can be found, the dso->kernel of it will be set to DSO_TYPE_KERNEL by
__event_process_build_id(), not kernel module.
It will then be passed to dso__load() -> dso__load_kernel_sym() ->
dso__load_kcore() if --kallsyms is provided.
The refered patch adds NULL pointer checker to avoid segfault. However,
such kernel modules are still processed incorrectly.
This patch fixes __kmod_path__parse, makes it treat names like
'[test_module]' as kernel modules.
kmod-path.c is also update to reflect the above changes.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1433321541-170245-1-git-send-email-wangnan0@huawei.com
[ Fixed the merged with 0443f36b0d ("perf machine: Fix the search
for the kernel DSO on the unified list" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove reference to the original Nehalem Turbo white paper,
since it has moved, and these mechanisms have now long since
been documented in the Software Developer's Manual.
Reported-by: Jeremie Lagraviere <jeremie@simula.no>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch moves list.h from tools/perf/util/include/linux/list.h to
tools/include/linux/list.h to enable other libraries use macros in it,
like libbpf which will be introduced by further patches. Since list.h
depend on poison.h, poison.h is also moved.
Both file use relative path, so one '..' is removed for each header to
make them suit for new directory.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves kernel.h from tools/perf/util/include/linux/kernel.h
to tools/include/linux/kernel.h to enable other libraries use macros in
it, like libbpf which will be introduced by further patches.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-2-git-send-email-wangnan0@huawei.com
[ Fixed up the ifdef guard to match other entries in tools/include/linux ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When unifying the user_dsos and kernel_dsos a bug was introduced by
inverting the check for dso->kernel, fix it.
Fixes: 3d39ac5386 ("perf machine: No need to have two DSOs lists")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-xnrnq0kams3s2z9ek1wjb506@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These tests were merged in parallel to the install support, update them
now to use it.
This also adds cross compile support for the VPHN test which was missing
it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU changes from Paul E. McKenney:
- Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single interactive
configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().
- RCU CPU-hotplug cleanups.
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
drivers/net/phy/amd-xgbe-phy.c
drivers/net/wireless/iwlwifi/Kconfig
include/net/mac80211.h
iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.
The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
The <fd979c013207> commit intruduced the perf_event_sysfs_show function
to display the event_str value of an attr in kernel/event/core.c. But
the function returns the value with a newline char.
So, if a event also carries a event.unit file, when printing the counter
data perf tool formatting goes for a spin.
That is, because of the event unit, event name is printed in the newline
because of perf_event_sysfs_show returns with a newline char.
Now fixing perf core will break API, hencing proposing a fix in the perf tool.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1433052383-21802-1-git-send-email-maddy@linux.vnet.ibm.com
[ Add spaces around operators ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mark strings, which are not supposed to be changed (basedir, filename,
value), as const in function parameters.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In generic_buffer.c: sort program parameters alphabetically and provide
usage information
In lsiio.c: drop unused parameters
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In build_channel_array(), count can be initialized already during variable
declaration.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In iioutils_get_type() it is logically better fitting to have sysfsfp
assigned zero right after closing it.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Change the assignment of *is_signed in iioutils_get_type() to a one-liner,
as already done with *be.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Refactor the code in print_event() to reduce code duplication and better
reflect that the type is output unconditionally, as well as cascade the
dependency of the diff-channel. Saves a few lines of code, as well.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add error handling to calls which can indicate a major problem by
returning an error code.
This also involves to change the type of dump_devices() from void to int.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add error handling to calls which can indicate a major problem by
returning an error code.
This also sets ret to -ENOENT in iioutils_get_type() and
iioutils_get_param_float() to indicate if no matching directory entry was
found.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull turbostat tool fixes from Len Brown:
"Just one minor kernel dependency in this batch -- added a #define to
msr-index.h"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number to 4.7
tools/power turbostat: allow running without cpu0
tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
tools/power turbostat: enable turbostat to support Knights Landing (KNL)
tools/power turbostat: correctly display more than 2 threads/core
Add error handling to calls which can indicate a major problem by
returning an error code.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add error handling to calls which can indicate a major problem by
returning an error code.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add handler to catch errors on conversion of numerical arguments.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch catches errors in string allocation in generic_buffer.c,
iio_event_monitor.c, iio_utils.c and lsiio.c.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Functions _write_sysfs_int() and _write_sysfs_string() are supposed to
be called only by public wrappers, so make them static.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Previously, the return value of sscanf() was treated as an indication of
the digits it would have read. Yet, sscanf() only returns the amount of
valid matches.
Therefore, introduce a function to calculate the decimal digits of the
read number and use this one to commence a colon search, as originally
intended.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
fscanf() usually returns the number of input items successfully matched
and assigned, which can be fewer than provided (or even zero).
Add a check in iioutils_get_type() to make sure all items are matched.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Refactor process_scan() to handle signed and unsigned data, respect shifts
and the data mask for 2, 4 and 8 byte sized scan elements.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
find_type_by_name() returns a valid error code in case of an error. Pass
this code up instead of an artificial one.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Since errno contains the value of any of the defined error names, a
negation will not lead to the desired match.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
