The BIOS of these machines will try to enable/disable wifi/bt in
their own sqeuence. It won't read the enable/disable parameter
in WMI command, but just iterates the wifi/bt's status described below
1st. enable wifi, enable bt
2nd. disable wifi, enable bt
3rd. enable wifi, disable bt
4th. disable wifi, disable bt
That will totally mess up the rfkill status, since we will try to read
wifi and bt's status and reset it again while booting up.
To avoid this, these machines should set the wapf value to 4,
that will let software totally control the wifi/bt's status and
BIOS will do nothing instead of sending out the 0x88(KEY_RFKILL) event
instead of 0x5e(wifi enable), 0x5f(wifi diable), 0x7d(bt enable), and
0x7e(bt disable) through WMI.
With this patch[1], it will handle the KEY_RFKILL event correctly and
will block/unblock wifi and bt together.
1. https://lkml.org/lkml/2012/5/21/75
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Since ACPI devices ids were changed to use always upper-case letters, the ACPI
id of the extra keys (FNBT0000) was not maching the one defined in the driver
(FnBT0000), causing the extra keys not to work.
The patch replaces the driver id with the one reported by ACPI, fixing the
problem.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Classmate V4 laptop includes a new accelerometer that can't be handled by
previous driver. This patch adds a new driver to handle it.
[mjg: Fixed up the driver pm stuff]
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
According to the ASUS WMI spec., to enable resume on lid open should
use the device ID(0x00120032), but it doesn't work indeed.
After discussing with ASUS' BIOS engineer, they say wake on lid open
doesn't have a uniq device ID(0x00120032) in the BIOS. It shares the same
device ID with deep S3(0x00120031), and the deep S3(resume on lid open)
is disable by default.
Adding this option in asus wmi sysfs
/sys/devices/platform/<platform>/lid_resume
so that userspace apps can enable/disable this feature by themselves.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
BugLink: https://bugs.launchpad.net/bugs/1000146
Some h/w that can adjust screen brightness through ACPI functions, but
can't turn on/off the backlight power correctly. So, we list those h/w in
quirks and try to turn on/off the backlight power through WMI.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
> Chassis Information
> Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
> Type: Other
Type should be "Notebook", "Laptop", .. not "Other".
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of using directly acpi_video_unregister(), use
acpi_video_dmi_promote_vendor() (and make it call
acpi_video_unregister() if needed)
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This device is present on Iconia Tab W500.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: joeyli <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
According to responses from the BIOS team, ASUS_WMI_METHODID_DSTS2
(0x53545344) will be used as future DSTS ID. In addition, calling
asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS2, 0, 0, NULL) returns
ASUS_WMI_UNSUPPORTED_METHOD in new ASUS laptop PCs. This patch fixes
no DSTS ID will be assigned in this case.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
Pull ACPI & power management update from Len Brown:
"Re-write of the turbostat tool.
lower overhead was necessary for measuring very large system when
they are very idle.
IVB support in intel_idle
It's what I run on my IVB, others should be able to also:-)
ACPICA core update
We have found some bugs due to divergence between Linux and the
upstream ACPICA base. Most of these patches are to reduce that
divergence to reduce the risk of future bugs.
Some cpuidle updates, mostly for non-Intel
More will be coming, as they depend on this part.
Some thermal management changes needed by non-ACPI systems.
Some _OST (OS Status Indication) updates for hot ACPI hot-plug."
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits)
Thermal: Documentation update
Thermal: Add Hysteresis attributes
Thermal: Make Thermal trip points writeable
ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check
tools/power: turbostat: fix large c1% issue
tools/power: turbostat v2 - re-write for efficiency
ACPICA: Update to version 20120711
ACPICA: AcpiSrc: Fix some translation issues for Linux conversion
ACPICA: Update header files copyrights to 2012
ACPICA: Add new ACPI table load/unload external interfaces
ACPICA: Split file: tbxface.c -> tbxfload.c
ACPICA: Add PCC address space to space ID decode function
ACPICA: Fix some comment fields
ACPICA: Table manager: deploy new firmware error/warning interfaces
ACPICA: Add new interfaces for BIOS(firmware) errors and warnings
ACPICA: Split exception code utilities to a new file, utexcep.c
ACPI: acpi_pad: tune round_robin_time
ACPICA: Update to version 20120620
ACPICA: Add support for implicit notify on multiple devices
ACPICA: Update comments; no functional change
...
Some of the thermal drivers using the Generic Thermal Framework
require (all/some) trip points to be writeable. This patch makes
the trip point temperatures writeable on a per-trip point basis,
and modifies the required function call in thermal.c. This patch
also updates the Documentation to reflect the new change.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI conversion to PM handling based on struct dev_pm_ops.
* Conversion of a number of platform drivers to PM handling based on struct
dev_pm_ops and removal of empty legacy PM callbacks from a couple of PCI
drivers.
* Suspend-to-both for in-kernel hibernation from Bojan Smojver.
* cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti U Murthy.
* cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
* Suspend and hibernate fixes from Srivatsa S. Bhat and Colin Cross.
* Generic PM domains framework updates.
* RTC CMOS wakeup signaling update from Paul Fox.
* sparse warnings fixes from Sachin Kamat.
* Build warnings fixes for the generic PM domains framework and PM sysfs code.
* sysfs switch for printing device suspend times from Sameer Nanda.
* Documentation fix from Oskar Schirmer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=vC4/
-----END PGP SIGNATURE-----
Merge tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
- ACPI conversion to PM handling based on struct dev_pm_ops.
- Conversion of a number of platform drivers to PM handling based on
struct dev_pm_ops and removal of empty legacy PM callbacks from a
couple of PCI drivers.
- Suspend-to-both for in-kernel hibernation from Bojan Smojver.
- cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti
Murthy.
- cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
- Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross.
- Generic PM domains framework updates.
- RTC CMOS wakeup signaling update from Paul Fox.
- sparse warnings fixes from Sachin Kamat.
- Build warnings fixes for the generic PM domains framework and PM
sysfs code.
- sysfs switch for printing device suspend times from Sameer Nanda.
- Documentation fix from Oskar Schirmer.
* tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch
EXYNOS: bugfix on retrieving old_index from freqs.old
PM / Sleep: call early resume handlers when suspend_noirq fails
PM / QoS: Use NULL pointer instead of plain integer in qos.c
PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock
PM / Sleep: Add missing static storage class specifiers in main.c
cpuilde / ACPI: remove time from acpi_processor_cx structure
cpuidle / ACPI: remove usage from acpi_processor_cx structure
cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure
rtc-cmos: report wakeups from interrupt handler
PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
olpc-xo15-sci: Use struct dev_pm_ops for power management
PM / Domains: Replace plain integer with NULL pointer in domain.c file
PM / Domains: Add missing static storage class specifier in domain.c file
PM / crypto / ux500: Use struct dev_pm_ops for power management
PM / IPMI: Remove empty legacy PCI PM callbacks
tpm_nsc: Use struct dev_pm_ops for power management
tpm_tis: Use struct dev_pm_ops for power management
...
* pm-drivers:
rtc-cmos: report wakeups from interrupt handler
PM / crypto / ux500: Use struct dev_pm_ops for power management
PM / IPMI: Remove empty legacy PCI PM callbacks
tpm_nsc: Use struct dev_pm_ops for power management
tpm_tis: Use struct dev_pm_ops for power management
tpm_atmel: Use struct dev_pm_ops for power management
PM / TPM: Drop unused pm_message_t argument from tpm_pm_suspend()
omap-rng: Use struct dev_pm_ops for power management
mg_disk: Use struct dev_pm_ops for power management
msi-laptop: Use struct dev_pm_ops for power management
hdaps: Use struct dev_pm_ops for power management
sonypi: Use struct dev_pm_ops for power management
intel_mid_thermal: Use struct dev_pm_ops for power management
acer-wmi: Use struct dev_pm_ops for power management
intel_ips: Remove empty legacy PM callbacks
thinkpad_acpi: Use struct dev_pm_ops instead of legacy PM routines
thinkpad_acpi: Drop pm_message_t arguments from suspend routines
Make the msi-laptop driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Lee, Chun-Yi <jlee@suse.com>
Make the HDAPS driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Make the intel_mid_thermal driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Make the acer-wmi driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
The legacy PM callbacks provided by the Intel IPS driver are
empty routines returning 0, so they can be safely dropped.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Make the thinkpad_acpi driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Matthew Garrett <mjg@redhat.com>
Multiple suspend routines in drivers/platform/x86/thinkpad_acpi.c
use take pm_message_t arguments that aren't used by any of them.
Make those routines take no arguments as that's what they should do.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Matthew Garrett <mjg@redhat.com>
Make the fujitsu-tablet driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Make the classmate-laptop driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Make the xo15-ebook driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Make the toshiba_bluetooth driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Vikram Dhillon <opensolarisdev@gmail.com>
Make the panasonic-laptop driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Make the sony-laptop driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Make the hp_accel driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Make the toshiba_acpi driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
None of the drivers implementing the ACPI device suspend callback
uses the pm_message_t argument of it, so this argument may be dropped
entirely from that callback. This will simplify switching the ACPI
bus type to PM handling based on struct dev_pm_ops.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
intel_ips driver spews the warning message
"ME failed to update for more than 1s, likely hung"
at each second endlessly on HP ProBook laptops with IronLake.
As this has never worked, better to blacklist the driver for now.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We only initialize the high bits of "cfg". It probably doesn't cause
a problem given that this is platform specific code and doesn't have to
worry about endianness etc. But it's sort of messy.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Since bab7084c74, find_snc_handle
returns -EINVAL, not -1.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This needs to be signed to handle negative error codes.
Remove a redundant check, read_limits is always called with a valid
handle.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We made this an unsigned long and it causes a bug on 64 bit big endian
systems when we try to pass the value to sony_nc_int_call().
Also value has to be signed because validate() returns negative error
codes.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
SNC needs input devices so better have those ready before starting
handle events.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some models offer the option to store the limits on the battery
(firmware?).
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some Vaios come with both integrated and discrete graphics, plus a
switch for choosing one of the two. When the switch position is changed,
a notification is generated.
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Correct mail address reference to a mail account which I actually read.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Feuerer <peter@piie.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I incorporated the wrong version of the suspend/resume patch for gmux,
and so lost David Woodhouse's fix to leave the backlight level unchanged
over suspend/resume. This fixes it up to v2.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The interface just doesn't work on some machines, and Dell haven't been
able to tell us either which machines those are or what we should be
doing instead. This would be fine, except it results in userspace ending
up confused and general sadness. So let's just rip it out for now.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
I managed to screw up the various backlight changes and ended up memsetting
the props structure after it had already been populated. This should fix it.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add Dell Vostro 3450 quirk to support touchpad LED.
CC: Mariusz Fik <fisiu@opensuse.org>
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acer Extensa 5235, TravelMate 5760 and Aspire 5750 laptop have broken _BCM
implemenation, the AML code wrote value to EC register but firmware didn't
change brighenss.
Fortunately, the brightness control works on those machines with vendor mode.
So, add this machine to video backlight vendor mode quirk table.
Reference: bko#36322
https://bugzilla.kernel.org/show_bug.cgi?id=36322
Reference: bko#42833
https://bugzilla.kernel.org/show_bug.cgi?id=42833
Reference: bko#42993
https://bugzilla.kernel.org/show_bug.cgi?id=42993
Cc: Christopher M. Penalver <christopher.penalver@gmx.com>
Cc: Bence Lukacs <lukacs.bence1@gmail.com>
Cc: Joern Heissler <kernelbugs2012@joern.heissler.de>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This setting is stored in the EC and available across reboots.
[malattia@linux.it: group function specific variables in a struct, use
kstrtoul]
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Also make the initialization function return a value for consistency
with all the other setup functions.
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add support for handle 0x0143 (Vaio SA/SB/SC, CA/CB) and rework the code
to be hable to support different handles for the keyboard backlight
function.
[malattia@linux.it: group function specific variables in a struct]
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
A few models offer the chance to set whether to resume from S3 and/or S4
when opening the lid.
[malattia@linux.it: create three sysfs files for S3/4/5 rather than
using a single one accepting a bitmask. Support S5 since the DSDT
exports it. Use a struct to hold all the related values, caching of the
current status value rather than re-reading all the time in the sysfs
show function.]
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
All handles must be greater than 0, also return more meaningful error
codes on invalid conditions.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
[malattia@linux.it: support string based profiles names]
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Allows limiting the maximum battery charge level to a selectable value
(100%, 80% and 50%).
[malattia@linux.it: group function specific variables in a struct, use
kstrtoul. Allow 0 to 100 values into sysfs files rounding to the actual
limit.]
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Loop through the list of SNC handles and run the proper initialization
function for each of the known handles. Also return void in function
where we are not checking the return value anyway.
For notifications we also know which handle is linked to the event and
the code becomes simpler to read with a switch rather than using
convoluted ifs.
[malattia@linux.it: Code reworked to merge the initialization code
improvements and the notify callback changes. Modified the code paths to
allow easier error exit paths. Also fixed some missing break statements
and spelling mistakes.]
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This avoids surprises like echoing "enable" into a sysfs file and
finding that the feature was actually disabled.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
All calls into the SNC device methods have zero or one arguments and
return an integer or a buffer (some functions go as far as returning an
integer _or_ a buffer depending on the input parameter...).
This allows simplifying a couple of code paths and prepares the field
for other users of functions returning buffers.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The goto target location would still try to free a buffer that was
never allocated.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The SNC device on recent Vaio laptops also stores the soft status and
leaves it available after reboot. Use it and always set the last soft
and hard status on module load.
[malattia@linux.it: patch taken from a largely modified sony-laptop.c,
smaller modifications to the original code to simplify it]
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
rfkill_alloc() returns NULL on failure. Check for it, to make the
static checkers happy.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some Toshiba laptops have the transflective LCD and toshset
can control its backlight state. I brought this feature to the
mainline. To support transflective LCD, it's implemented by
adding an extra level to the backlight and having 0 change to
transflective mode. It was tested on a Toshiba Portege R500.
Signed-off-by: Akio Idehara <zbe64533@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Currently the backlight device is registered unconditionally, but many
(probably most) Toshibas either don't support HCI_LCD_BRIGHTNESS or only
support reading from it. This patch adds a test of HCI_LCD_BRIGHTNESS
during initialization and only registers the backlight device if this
interface supports both reads and writes.
Cc: Akio Idehara <zbe64533@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Otherwise will generate KEY_UNKNOWN on un-listed vpc event,
which means nothing and is hard for user to report the detail
of the event.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
After review the current ideapad-laptop, found an unused define and
a typo.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
I haven't had a working gmail address for many years - update to my
actual working address.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The tp_features.bright_acpimode will not be set correctly for brightness
control because ACPI_VIDEO_HID will not be located in ACPI. As a result,
a duplicated key event will always be sent. acpi_video_backlight_support()
is sufficient to detect standard ACPI brightness control.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
After S3, the brightness might not be restored to the pre-suspend value.
Request status update calls from the backlight core on suspend/resume to
ensure the brightness value is restored.
Reported-and-tested-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The XO-1 rfkill driver should only send EC commands when changing
between blocked/unblocked state.
The rfkill switch is asked to be unblocked on every resume (even when
the card was never blocked before) and sending a EC_WLAN_LEAVE_RESET
command here upsets the resume sequence of the libertas driver. Adding
the check to avoid the spurious EC_WLAN_LEAVE_RESET fixes the wifi resume
behaviour.
The rfkill state is maintained by the hardware over suspend/resume
so no extra consideration is needed here.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch adds a quirk to fix the dock detection for Fujitsu Stylistic
devices and fixes an bug in which tablet mode state was not correctly
reported in Fujitsu Lifebook and Stylistic models.
Signed-off-by: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with
error: $variablename causes a section type conflict
because a section containing const variables is marked read only and so
cannot contain non-const variables.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Cc: platform-driver-x86@vger.kernel.org
Cc: ibm-acpi-devel@lists.sourceforge.net
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add "Vostro 3360", "Vostro 3460", and "Vostro 3560" into quirks,
so that they could have touchpad LED function work.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add Vostro 3350 into quirks so that the touchpad LED works.
Signed-off-by: Ang Way Chuang <wcang79@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In all these files, the .power field was never correctly initialized.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial updates from Jiri Kosina:
"As usual, it's mostly typo fixes, redundant code elimination and some
documentation updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
edac, mips: don't change code that has been removed in edac/mips tree
xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
lib: Change mail address of Oskar Schirmer
net: Change mail address of Oskar Schirmer
arm/m68k: Change mail address of Sebastian Hess
i2c: Change mail address of Oskar Schirmer
net: Fix tcp_build_and_update_options comment in struct tcp_sock
atomic64_32.h: fix parameter naming mismatch
Kconfig: replace "--- help ---" with "---help---"
c2port: fix bogus Kconfig "default no"
edac: Fix spelling errors.
qla1280: Remove redundant NULL check before release_firmware() call
remoteproc: remove redundant NULL check before release_firmware()
qla2xxx: Remove redundant NULL check before release_firmware() call.
aic94xx: Get rid of redundant NULL check before release_firmware() call
tehuti: delete redundant NULL check before release_firmware()
qlogic: get rid of a redundant test for NULL before call to release_firmware()
bna: remove redundant NULL test before release_firmware()
tg3: remove redundant NULL test before release_firmware() call
typhoon: get rid of redundant conditional before all to release_firmware()
...
Pull x86 fixes form Peter Anvin
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
x86, relocs: Remove an unused variable
asm-generic: Use __BITS_PER_LONG in statfs.h
x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
So that the power button still wakes up the platform.
Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.com
Tested-by: Kangkai Yin <kangkai.yin@intel.com>
Tested-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Merge fixes from Andrew Morton:
"13 fixes. The acerhdf patches aren't (really) fixes. But they've
been stuck in my tree for up to two years, sent to Matthew multiple
times and the developers are unhappy."
* emailed from Andrew Morton <akpm@linux-foundation.org>: (13 patches)
mm: fix NULL ptr dereference in move_pages
mm: fix NULL ptr dereference in migrate_pages
revert "proc: clear_refs: do not clear reserved pages"
drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled
arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file
hugetlbfs: lockdep annotate root inode properly
acerhdf: lowered default temp fanon/fanoff values
acerhdf: add support for new hardware
acerhdf: add support for Aspire 1410 BIOS v1.3314
fs/buffer.c: remove BUG() in possible but rare condition
mm: fix up the vmscan stat in vmstat
epoll: clear the tfile_check_list on -ELOOP
mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma
Due to new supported hardware, of which the actual temperature limits of
processor, harddisk and other components are unknown, it feels safer with
lower fanon / fanoff settings.
It won't change much for most people, already using acerhdf, as they use
their own fanon/fanoff variable settings when loading the module.
Furthermore seems like kernel and userspace tools have been improved to
work more efficient and netbooks don't get so hot anymore.
Signed-off-by: Peter Feuerer <peter@piie.net>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for new hardware:
Acer Aspire LT-10Q/531/751/1810/1825,
Acer Travelmate 7730,
Packard Bell ENBFT/DOTVR46
Signed-off-by: Peter Feuerer <peter@piie.net>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add missing DMI_NONE entry to end of the quirks list so
dmi_check_system() won't read past the end of the list.
Signed-off-by: Martin Nyhus <martin.nyhus@gmx.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We can't control order here, and getting it inverted is harmless. So
turn this down to dev_info() and leave a note about how to fix it in
case userspace is insufficiently automagic.
Bugzilla: https://bugzilla.redhat.com/794953
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.
Conflicts:
drivers/net/ethernet/realtek/r8169.c
Pull ACPI & Power Management changes from Len Brown:
- ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup
- cpuidle evolving, more ARM use
- thermal sub-system evolving, ditto
- assorted other PM bits
Fix up conflicts in various cpuidle implementations due to ARM cpuidle
cleanups (ARM at91 self-refresh and cpu idle code rewritten into
"standby" in asm conflicting with the consolidation of cpuidle time
keeping), trivial SH include file context conflict and RCU tracing fixes
in generic code.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits)
ACPI throttling: fix endian bug in acpi_read_throttling_status()
Disable MCP limit exceeded messages from Intel IPS driver
ACPI video: Don't start video device until its associated input device has been allocated
ACPI video: Harden video bus adding.
ACPI: Add support for exposing BGRT data
ACPI: export acpi_kobj
ACPI: Fix logic for removing mappings in 'acpi_unmap'
CPER failed to handle generic error records with multiple sections
ACPI: Clean redundant codes in scan.c
ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()
ACPI: consistently use should_use_kmap()
PNPACPI: Fix device ref leaking in acpi_pnp_match
ACPI: Fix use-after-free in acpi_map_lsapic
ACPI: processor_driver: add missing kfree
ACPI, APEI: Fix incorrect APEI register bit width check and usage
Update documentation for parameter *notrigger* in einj.txt
ACPI, APEI, EINJ, new parameter to control trigger action
ACPI, APEI, EINJ, limit the range of einj_param
ACPI, APEI, Fix ERST header length check
cpuidle: power_usage should be declared signed integer
...
On a system on the thermal limit these are quite noisy and flood the logs.
Better would be a counter anyways. But given that we don't even have
anything for normal throttling this doesn't seem to be urgent either.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull x86 platform driver updates from Matthew Garrett:
"Some significant updates to samsung-laptop, additional hardware
support for Toshibas, misc updates to various hardware and a new
backlight driver for some Apple machines."
Fix up trivial conflicts: geode Geos update happening next to net5501
support, and MSIC thermal platform support added twice.
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (77 commits)
acer-wmi: add quirk table for video backlight vendor mode
drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() avoid NULL deref
samsung-laptop: unregister ACPI video module for some well known laptops
acer-wmi: No wifi rfkill on Sony machines
thinkpad-acpi: recognize Lenovo as version string in newer V-series BIOS
asus-wmi: don't update power and brightness when using scalar
eeepc-wmi: split et2012 specific hacks
eeepc-wmi: refine quirks handling
asus-nb-wmi: set panel_power correctly
asus-wmi: move WAPF variable into quirks_entry
asus-wmi: store backlight power status for AIO machine
asus-wmi: add scalar board brightness adj. support
samsung-laptop: cleanup return type: mode_t vs umode_t
drivers, samsung-laptop: fix usage of isalnum
drivers, samsung-laptop: fix initialization of sabi_data in sabi_set_commandb
asus-wmi: on/off bit is not set when reading the value
eeepc-wmi: add extra keymaps for EP121
asus-nb-wmi: ignore useless keys
acer-wmi: support Lenovo ideapad S205 Brazos wifi switch
acer-wmi: fix out of input parameter size when set
...
This patch updates Jonathan Woithe's contact details across the kernel tree.
Signed-off-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There have some acer laptop have broken _BCM implemenation, the AML
code wrote value to EC register but firmware didn't change brighenss.
Fortunately, the brightness control works on those machines with
vendor mode. So, add quirk table for video backlight vendor mode
and unregister acpi video interface on those machines.
Tested on Acer TravelMate 4750
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In drivers/platform/x86/amilo-rfkill.c::amilo_rfkill_probe() the call
to dmi_first_match() may fail and return NULL. If it does return NULL,
then we'll be dereferencing a NULL pointer in the rfkill_alloc() call
where we do 'system_id->driver_data' --> KABOOM!
Avoid that problem by testing for a NULL return value from
dmi_first_match() and bailing out if it fails.
I was a bit uncertain about what to return in the failure case. In the
end I settled for -ENXIO as the most logical error to return.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
On these laptops, the ACPI video is not functional, and very unlikely
to be fixed by the vendor. Note that intel_backlight works for some
of these laptops, and the backlight from samsung-laptop always work.
The good news is that newer laptops have functional ACPI video device
and won't end up growing this list.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The wireless rfkill should charged by sony-laptop but not acer-wmi.
So, add Sony's SNY5001 acpi device to blacklist in acer-wmi.
Tested on Sony Vaio
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Mattia Dongili <malattia@linux.it>
Cc: Dimitris N <ddarlac@gmail.com>
Tested-by: Dimitris N <ddarlac@gmail.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The newer V series bios reports product version as 'Lenovo'
instead of 'ThinkPad'. Recoginze this new string so that
the module can load.
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Tested-by: James Ferguson <james.ferguson@canonical.com>
Tested-by: Dennis Chua <dennis.chua@canonical.com>
Tested-by: Ike Pan <ike.pan@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
But we can still do it on other boards, as this might happen
if the backlight driver change when update_bl is called.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some models work better with different values of wapf, so move the
variable into quriks_entry to make it more easy to give a specific
value to different models.
Based on original patch from AceLan Kao <acelan.kao@canonical.com>
Cc: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Due to some implementation reasons, ASUS ET2012 All-in-One machines
can't report the correct backlight power status, it will always return
1. To track the backlight power status correctly, we have to store the
status by ourselves.
BTW, by the BIOS design, the backlight power will be turn on/off
sequently, no matter what the value of the parameter will be.
More over, the brightness adjustment command will turn on the backlight
power. Those behaviors will make us fail to track the backlight power
status.
For example, While we are trying to turn on the backlight power,
we will send out the brightness adjustment command and then trying to
figure out if we have to turn on the backlight power, then send out
the command. But, the real case is that, the backlight power turns on
while sending the brightness adjustment command, and then we send out
the command to turn on the backlight power, it actually will turn off
the backlight power and the backlight power status we recorded becomes
wrong. So, we have to seperate these two commands by a if statement.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some ASUS ET2012E/I All-in-One machines that use a scalar board
to control the brightness, and they only accept brightness up and down
command. So, I introduced a get_scalar_command() function to pass the
command to the scalar board through WMI.
Besides, we have to store the brightness value locally, for we need the
old value to know the brightness value is increasing or decreasing.
BTW, since there is no way to retrieve the actual brightness(it would be
a fixed value), and the max brightness value would be fixed to 1, so we
have to keep passing the brightness up/down command when we reached the
max brightness value or 0.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This function returns a umode_t (unsigned short) instead of mode_t which
is an unsigned int on some architectures. Cleaning this up silences a
compile warning:
drivers/platform/x86/samsung-laptop.c:1108:2: warning: initialization
from incompatible pointer type [enabled by default]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
linux/ctype.h is needed for isalnum() to avoid a build error:
drivers/platform/x86/samsung-laptop.c: In function ‘samsung_sabi_diag’:
drivers/platform/x86/samsung-laptop.c:1306: error: implicit declaration of function ‘isalnum’
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fields d0, d1, d2, and d3 are members of an anonymous struct inside an
anonymous union inside struct sabi_data. Initialization must be done by
wrapping the anonymous union and structs with brackets to avoid a build
error:
drivers/platform/x86/samsung-laptop.c: In function ‘sabi_set_commandb’:
drivers/platform/x86/samsung-laptop.c:433: error: unknown field ‘d0’ specified in initializer
drivers/platform/x86/samsung-laptop.c:433: warning: missing braces around initializer
drivers/platform/x86/samsung-laptop.c:433: warning: (near initialization for ‘in.<anonymous>’)
...
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Vaclav found a new ideapad S205 Brazos machine that used the same
EC register of wireless with S205 but has different product name.
So, add this machine to quirk for support wireless rfkill.
Tested on Lenovo ideapad S205 Brazos
Tested-by: Vaclav Mocek <vmocek@gmail.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The input parameter of set device status is different with get device
status. There have volume value element for set status but don't need
for get action.
On Acer TravelMate 4750 creates field on volume value element even
doesn't use it in DSDT. So, add this patch for separate input paramter
between set device status with get status.
Tested on Acer TravelMate 4750
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Currently we set a fixed hot key number to 0x01 for communction button,
but, actually, the key number is different on each acer laptop and it was
reported by SMBIOS.
So, add this patch to get the communication hot key number from Acer
OEM-specific SMBIOS Type AA.
Tested on Acer TravelMate 4750
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Apple laptops with hybrid graphics have a device named gmux that
controls the muxing of the LVDS panel between the GPUs as well as screen
brightness. This driver adds support for the gmux device. Only backlight
control is supported initially.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Pull PCI changes (including maintainer change) from Jesse Barnes:
"This pull has some good cleanups from Bjorn and Yinghai, as well as
some more code from Yinghai to better handle resource re-allocation
when enabled.
There's also a new initcall_debug feature from Arjan which will print
out quirk timing information to help identify slow quirks for fixing
or refinement (Yinghai sent in a few patches to do just that once the
new debug code landed).
Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas.
He's been a core PCI and Linux contributor for some time now, and has
kindly volunteered to take over. I just don't feel I have the time
for PCI review and work that it deserves lately (I've taken on some
other projects), and haven't been as responsive lately as I'd like, so
I approached Bjorn asking if he'd like to manage things. He's going
to give it a try, and I'm confident he'll do at least as well as I
have in keeping the tree managed, patches flowing, and keeping things
stable."
Fix up some fairly trivial conflicts due to other cleanups (mips device
resource fixup cleanups clashing with list handling cleanup, ppc iseries
removal clashing with pci_probe_only cleanup etc)
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits)
PCI: Bjorn gets PCI hotplug too
PCI: hand PCI maintenance over to Bjorn Helgaas
unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h
sparc/PCI: convert devtree and arch-probed bus addresses to resource
powerpc/PCI: allow reallocation on PA Semi
powerpc/PCI: convert devtree bus addresses to resource
powerpc/PCI: compute I/O space bus-to-resource offset consistently
arm/PCI: don't export pci_flags
PCI: fix bridge I/O window bus-to-resource conversion
x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()'
PCI / PCIe: Introduce command line option to disable ARI
PCI: make acpihp use __pci_remove_bus_device instead
PCI: export __pci_remove_bus_device
PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge
PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device
PCI: print out PCI device info along with duration
PCI: Move "pci reassigndev resource alignment" out of quirks.c
PCI: Use class for quirk for usb host controller fixup
PCI: Use class for quirk for ti816x class fixup
PCI: Use class for quirk for intel e100 interrupt fixup
...
Pull x86 platform changes from Ingo Molnar.
Removes the Moorestown platform that nobody ever used.
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform: Move APIC ID validity check into platform APIC code
x86/olpc/xo15/sci: Enable lid close wakeup control
x86/geode/net5501: Add platform driver for Soekris Engineering net5501
x86/geode/alix2: Supplement driver to include GPIO button support
x86/mid/powerbtn: Use MSIC read/write instead of ipc_scu
x86/mid/thermal: Turn off thermistor
x86/mid/thermal: Add msic_thermal alias
x86/mid/thermal: Convert to use Intel MSIC API
x86/mid/scu_ipc: Remove Moorestown support
x86/mid: Kill off Moorestown
x86/mrst: Add msic_thermal platform support
x86/config: Select MSIC MFD driver on Intel Medfield platform
x86/mid: Remove Intel Moorestown
x86/mrst: Set ISA bus type for fake MP IRQs
x86/ioapic: Use legacy_pic to set correct gsi-irq mapping
Several Satellite models have a buggy implementation of the INFO method
that causes ACPI exceptions when executed:
ACPI Error: Result stack is empty! State=ffff88012d70f800 (20110413/dswstate-98)
ACPI Exception: AE_AML_NO_RETURN_VALUE, Missing or null operand (20110413/dsutils-646)
ACPI Exception: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20110413/dsutils-763)
ACPI Error: Method parse/execution failed [\_SB_.VALZ.GETE] (Node ffff880131175eb0), AE_AML_NO_RETURN_VALUE (20110413/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.VALZ.INFO] (Node ffff880131175ed8), AE_AML_NO_RETURN_VALUE (20110413/psparse-536)
toshiba_acpi: ACPI INFO method execution failed
toshiba_acpi: Failed to query hotkey event
All known machines with this implementation also have a WMI interface
with event GUID 59142400-C6A3-40FA-BADB-8A2652834100 which is not seen
on any other models. Refuse to load toshiba_acpi on machines with this
guid.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
These scancodes are used by many of the models now supported with
the addition of TOS1900 device support.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There are two types of problems that prevent hotkeys from working
on many of the machines supported by toshiba_acpi. The first of
these is the lack of a functioning SCI for hotkey events. For these
machines it is possible to filter the Fn keypresses from the
keyboard and generate a notification by executing the ACPI NTFY
method.
The second problem is a lack of support for HCI_SYSTEM_EVENT, which
is used for reading the hotkey scancodes. On these machines the
scancodes can be read by executing the ACPI NTFY method.
This patch fixes both problems by installing an i8042 filter when
the NTFY method is present to generate notifications and by
detecting which of INFO or HCI_SYSTEM_EVENT is supported for
reading scancodes. If neither method of reading scancodes is
supported, the hotkey input device is not registered.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Pull trivial tree from Jiri Kosina:
"It's indeed trivial -- mostly documentation updates and a bunch of
typo fixes from Masanari.
There are also several linux/version.h include removals from Jesper."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
kcore: fix spelling in read_kcore() comment
constify struct pci_dev * in obvious cases
Revert "char: Fix typo in viotape.c"
init: fix wording error in mm_init comment
usb: gadget: Kconfig: fix typo for 'different'
Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
writeback: fix typo in the writeback_control comment
Documentation: Fix multiple typo in Documentation
tpm_tis: fix tis_lock with respect to RCU
Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
Doc: Update numastat.txt
qla4xxx: Add missing spaces to error messages
compiler.h: Fix typo
security: struct security_operations kerneldoc fix
Documentation: broken URL in libata.tmpl
Documentation: broken URL in filesystems.tmpl
mtd: simplify return logic in do_map_probe()
mm: fix comment typo of truncate_inode_pages_range
power: bq27x00: Fix typos in comment
...
In the 2.6.36 kernel we did not have the MSIC driver. Changed
all ipc_scu_reads/writes to use the MSIC driver and defines.
Added a fix from the 2.6.36 kernel where the SCU FW could send
a power button interrupt to the IA32 FW and the kernel was not
running yet. This resulted in the interrupt not getting cleared
and the power button was ignored. this fix just clears the
interrupt on start-up.
Signed-off-by: Michael Demeter <michael.demeter@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Revert style-only changes. Remove unused variable. Fix comment style.]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
All production devices operate in the Oaktrail configuration with legacy PC
elements present and an ACPI BIOS. Continue stripping out the Moorestown
elements from the tree leaving Medfield.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Trivial fix for some -Wuninitialized compiler warnings.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
BugLink: http://launchpad.net/bugs/865807
There is no entry for P key on TM8372, so when P key is pressed, only
"acer_wmi: Unknown key number - 0x29" in dmesg.
Signed-off-by: Merlin Schumacher <merlin.schumacher@gmail.com>
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Touchpad LED will not turn on after S3, it will make the touchpad status
doesn't consist with the LED.
By adding one flag to let the LED device restore it's status.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This doesn't change how the code works, but it silences a Sparse
complaint:
drivers/platform/x86/toshiba_acpi.c:121:37: error: dubious one-bit signed bitfield
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The "wmi_interface *iface" is a useless input argument for internal wmi get/set
functions, remove it to clear up source code.
Tested on Lenovo E520.
Tested on Acer TravelMate 4750.
Tested-by: mr.kobzar <mr.kobzar@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of complaining that the voltage is on, we can just ask the MSIC to
turn the voltage off. This should save some power.
Voltage for thermistors is turned on when ADC conversion is initiated.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Intel MSIC MFD driver provides common register access interface to the
devices in the MSIC die so we use that instead of SCU IPC.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In newer boards this device is called "msic_thermal" instead of
"msic_sensor". To support both we add suitable alias for the driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
asus_acpi only support old models, it has been deprecated since
2009 in favor of asus-laptop, it's not built by any (sane) distro,
so it is time to say good bye.
Thanks to Julien Lerouge and Karol Kozimor for the work they have
done on it, I would never have wrote asus-laptop and other asus
related drivers without asus_acpi.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
But don't try to do than on pegatron tablets to avoid any
conflict.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Let the user tells if BLED and WLED should be exposed as led or
rfkill (the old sysfs are still here, but this adds a standard
interface to control the device).
For example on my A6JC, with WAPF=1, I would do:
$ modprobe asus-laptop wled_type=led bluetooth_type=rfkill
There is still no known way to automatically guess what BLED
and WLED methods will control, it's why user information is needed.
A userspace database could do that automatically, and maybe some DMI
matching in the driver.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use pr_warn not pr_warning.
Coalesce formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
- don't output error when probing features at load
- print the SABI signature if samsung_sabi_init()
succeed
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We still need to figure out exactly what each of different fields
represent, but they contain at least model and version informations.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This enable the driver for everything that look like
a laptop and is from vendor "SAMSUNG ELECTRONICS CO., LTD.".
Note that laptop supported by samsung-q10 seem to have a different
vendor strict.
Also remove every log output until we know that we have a SABI interface
(except if the driver is forced to load, or debug is enabled).
Keeping a whitelist of laptop with a model granularity is something that can't
work without close vendor cooperation (and we don't have that).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The wireless status get and get commands seems to use one
byte per device. First byte is for wlan and third is for bluetooh,
we will have to find what the other are for.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We can now do the self test using debugfs, so remove the code
and keep the debug flag to enable more traces.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This allow to call arbitrary sabi commands wihout
modifying the driver at all. For example, setting
the keyboard backlight brightness to 5 using debugfs
interface can be done like that:
; Set the command
echo 0x78 > command
; Set the data
echo 0x0582 > d0
; Fill the rest with 0
echo 0 > d1
echo 0 > d2
echo 0 > d3
; And issue the command
cat call
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
* SABI command are on 16 bits, not 8
* SABI can read/write up to 11 byte of data
* There is not real difference between "get" and "set"
commands, so refactorise the code of both functions
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Will be usefull later when we will have more platform sysfs files
like battery_life_extender or usb_charge.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
samsung-laptop is not at all related to ACPI, but since this interface
is not documented at all, and the driver has to use it at load to
understand how it works on the laptop, I think it's a good idea to
disable it if a better solution is available.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Create _init()/_exit() function for each subsystem, remove
the local struct samsung_laptop * and only keep a
struct platform_device * that can only be used in samsung_init()
and samsung_exit().
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Even if this driver can only be loaded once, it is still a good
idea to create some kind of context structure.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch converts the drivers in drivers/platform/x86/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Hong Liu <hong.liu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Turn off the following triggered with gcc 4.6.1 on Debian testing:
drivers/platform/x86/hdaps.c: In function ‘hdaps_temp2_show’:
drivers/platform/x86/hdaps.c:398:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized]
drivers/platform/x86/hdaps.c: In function ‘hdaps_temp1_show’:
drivers/platform/x86/hdaps.c:385:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized]
Cc: Frank Seidel <frank@f-seidel.de>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add "Vostro 3555", "Inspiron N311z", and "Inspiron M5110" into quirks,
so that they could have touchpad LED function work.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix scancodes returned by driver to match scancodes used to remap keys.
(Before the patch FN/E returned scancode 0x1B, but to remap scancode
0x14 had to be used).
The scancodes returned by the sony-laptop driver for function keys did not
match the scancodes used to remap keys. Also, since the scancode was sent
to the input subsystem after the mapped keysym the /lib/udev/keymap
utility was confused about which scancode to report for which keysym.
This patch fixes the driver so the correct scancode is shown for each
key. It also adds to the documentation a description of where to find
the scancodes.
Signed-off-by: John Hughes <john@calva.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
All the production devices use the PC compatible version of this device so
don't use the SCU interfaces or the SCU firmware interfaces.
Delete lots of code and conditional paths
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
When the keyboard backlight support was originally added, the commit said
to default it to on with a 10 second timeout. That actually wasn't the
case, as the default value is commented out for the kbd_backlight parameter.
Because it is a static variable, it gets set to 0 by default without some
other form of initialization.
However, it seems the function to set the value wasn't actually called
immediately, so whatever state the keyboard was in initially would remain.
Then commit df410d5224 was introduced during the 2.6.39 timeframe to
immediately set whatever value was present (as well as attempt to
restore/reset the state on module removal or resume). That seems to have
now forced the light off immediately when the module is loaded unless
the option kbd_backlight=1 is specified.
Let's enable it by default again (for the first time). This should solve
https://bugzilla.redhat.com/show_bug.cgi?id=728478
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
num_sifr could go negative since acpi_pcc_get_sqty() returns -EINVAL
on error. Then it could bypass the sanity check (num_sifr > 255).
The subsequent call to kzalloc() would allocate a small buffer, leading
to a memory corruption.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We have several reports which says acer-wmi is loaded on ideapads
and register rfkill for wifi which can not be unblocked.
Since ideapad-laptop also register rfkill for wifi and it works
reliably, it will be fine acer-wmi is not going to register rfkill
for wifi once VPC2004 is found.
Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no
wifi rfkill capability, there are reports which says acer-wmi also
block wireless on Thinkpad E520/E420.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch adds support for some of the devices within a wide variety
of Fujitsu Tablet Computers, both convertibles and slates. Primarily
it allows for the automatic detection of the tablet/notebook mode for
convertible tablet pc's, and orientation for docked slates. It also
adds support for the application panel buttons usually found next to
the tablet screen, and docking station detection for slates.
Signed-off-by: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
An rfkill driver based on the fsaa1655g and fsam7440 drivers for
Fujitsu-Siemens Amilo A1655 and M7440 models found at:
http://sourceforge.net/projects/fsaa1655g/http://sourceforge.net/projects/fsam7440/
This adds DMI matching, replaces the procfs files with rfkill devices,
and uses the proper functions to write to the i8042 safely.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In the 2.6.36 kernel we did not have the MSIC driver. Changed
all ipc_scu_reads/writes to use the MSIC driver and defines.
Added a fix from the 2.6.36 kernel where the SCU FW could send a
power button interrupt to the IA32 FW and the kernel was not
running yet. This resulted in the interrupt not getting cleared
and the power button was ignored. this fix just clears the
interrupt on start-up.
Signed-off-by: Michael Demeter <michael.demeter@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ Revert style-only changes. Remove unused variable. Fix comment style. ]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-4runmso4t49p4waz5gcvy0ux@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of complaining that the voltage is on, we can just ask
the MSIC to turn the voltage off. This should save some power.
Voltage for thermistors is turned on when ADC conversion is
initiated.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Durgadoss R <durgadoss.r@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-85zdo06yve1o27jpwc74gzng@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This device is called "msic_thermal" instead of "msic_sensor" on
actual boards so rename it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ Updated to rename rather than add an entry as er discussion with Mika & Durgadoss R]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-gyrbptvkozsbp2yk3ssu084o@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Intel MSIC MFD driver provides common register access interface
to the devices in the MSIC die so we use that instead of SCU
IPC.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Durgadoss R <durgadoss.r@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-6so0ep0lj0zann68ad5983xh@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All the production devices use the PC compatible version of this
device so don't use the SCU interfaces or the SCU firmware
interfaces.
Delete lots of code and conditional paths
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-4bg4fn9na37b350ohhgiy18n@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All production devices operate in the Oaktrail configuration
with legacy PC elements present and an ACPI BIOS. Continue
stripping out the Moorestown elements from the tree leaving
Medfield.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-z0dxy88f949rvxo5vvd08ybs@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The old pci_remove_bus_device actually did stop and remove.
Make the name reflect that to reduce confusion.
This patch is done by sed scripts and changes back some incorrect
__pci_remove_bus_device changes.
Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This provides unified readq()/writeq() helper functions for 32-bit
drivers.
For some cases, readq/writeq without atomicity is harmful, and order of
io access has to be specified explicitly. So in this patch, new two
header files which contain non-atomic readq/writeq are added.
- <asm-generic/io-64-nonatomic-lo-hi.h> provides non-atomic readq/
writeq with the order of lower address -> higher address
- <asm-generic/io-64-nonatomic-hi-lo.h> provides non-atomic readq/
writeq with reversed order
This allows us to remove some readq()s that were added drivers when the
default non-atomic ones were removed in commit dbee8a0aff ("x86:
remove 32-bit versions of readq()/writeq()")
The drivers which need readq/writeq but can do with the non-atomic ones
must add the line:
#include <asm-generic/io-64-nonatomic-lo-hi.h> /* or hi-lo.h */
But this will be nop in 64-bit environments, and no other #ifdefs are
required. So I believe that this patch can solve the problem of
1. driver-specific readq/writeq
2. atomicity and order of io access
This patch is tested with building allyesconfig and allmodconfig as
ARCH=x86 and ARCH=i386 on top of tip/master.
Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trivial fix for some -Wuninitialized compiler warnings.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel config: Fix the APB_TIMER selection
x86/mrst: Add additional debug prints for pb_keys
x86/intel config: Revamp configuration to allow for Moorestown and Medfield
x86/intel/scu/ipc: Match the changes in the x86 configuration
x86/apb: Fix configuration constraints
x86: Fix INTEL_MID silly
x86/Kconfig: Cyclone-timer depends on x86-summit
x86: Reduce clock calibration time during slave cpu startup
x86/config: Revamp configuration for MID devices
x86/sfi: Kill the IRQ as id hack
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
PM / Hibernate: Implement compat_ioctl for /dev/snapshot
PM / Freezer: fix return value of freezable_schedule_timeout_killable()
PM / shmobile: Allow the A4R domain to be turned off at run time
PM / input / touchscreen: Make st1232 use device PM QoS constraints
PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
PM / shmobile: Remove the stay_on flag from SH7372's PM domains
PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
PM: Drop generic_subsys_pm_ops
PM / Sleep: Remove forward-only callbacks from AMBA bus type
PM / Sleep: Remove forward-only callbacks from platform bus type
PM: Run the driver callback directly if the subsystem one is not there
PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
PM / Sleep: Merge internal functions in generic_ops.c
PM / Sleep: Simplify generic system suspend callbacks
PM / Hibernate: Remove deprecated hibernation snapshot ioctls
PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
ARM: S3C64XX: Implement basic power domain support
PM / shmobile: Use common always on power domain governor
...
Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
reiserfs: Properly display mount options in /proc/mounts
vfs: prevent remount read-only if pending removes
vfs: count unlinked inodes
vfs: protect remounting superblock read-only
vfs: keep list of mounts for each superblock
vfs: switch ->show_options() to struct dentry *
vfs: switch ->show_path() to struct dentry *
vfs: switch ->show_devname() to struct dentry *
vfs: switch ->show_stats to struct dentry *
switch security_path_chmod() to struct path *
vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
vfs: trim includes a bit
switch mnt_namespace ->root to struct mount
vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
vfs: opencode mntget() mnt_set_mountpoint()
vfs: spread struct mount - remaining argument of next_mnt()
vfs: move fsnotify junk to struct mount
vfs: move mnt_devname
vfs: move mnt_list to struct mount
vfs: switch pnode.h macros to struct mount *
...
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.
The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The sysdev.h file should not be needed by any in-kernel code, so remove
the .h file from these random files that seem to still want to include
it.
The sysdev code will be going away soon, so this include needs to be
removed no matter what.
Cc: Jiandong Zheng <jdzheng@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "Venkatesh Pallipadi
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
* master: (848 commits)
SELinux: Fix RCU deref check warning in sel_netport_insert()
binary_sysctl(): fix memory leak
mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
ipmi_watchdog: restore settings when BMC reset
oom: fix integer overflow of points in oom_badness
memcg: keep root group unchanged if creation fails
nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
nilfs2: unbreak compat ioctl
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
evm: prevent racing during tfm allocation
evm: key must be set once during initialization
mmc: vub300: fix type of firmware_rom_wait_states module parameter
Revert "mmc: enable runtime PM by default"
mmc: sdhci: remove "state" argument from sdhci_suspend_host
x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
IB/qib: Correct sense on freectxts increment and decrement
RDMA/cma: Verify private data length
cgroups: fix a css_set not found bug in cgroup_attach_proc
oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
...
Conflicts:
kernel/cgroup_freezer.c
After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Satellite C670-10V generates notifications for hotkeys but does
not support HCI_SYSTEM_EVENT. As a result when a hotkey is pressed
it gets stuck in an infinite loop in toshiba_acpi_notify. To fix
this, detect whether or not HCI_SYSTEM_EVENT is supported up-front
and don't try to read system events if it isn't supported. In
addition, limit the number of retries when reading HCI_SYSTEM_EVENT
fails so that this loop cannot run unbounded.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Writeback and thinkpad_acpi have been using thaw_process() to prevent
deadlock between the freezer and kthread_stop(); unfortunately, this
is inherently racy - nothing prevents freezing from happening between
thaw_process() and kthread_stop().
This patch implements kthread_freezable_should_stop() which enters
refrigerator if necessary but is guaranteed to return if
kthread_stop() is invoked. Both thaw_process() users are converted to
use the new function.
Note that this deadlock condition exists for many of freezable
kthreads. They need to be converted to use the new should_stop or
freezable workqueue.
Tested with synthetic test case.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Fix build warnings:
drivers/platform/x86/dell-laptop.c:592:13: warning: function declaration isn't a prototype
drivers/platform/x86/dell-laptop.c:599:13: warning: function declaration isn't a prototype
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Otherwise we get compile errors like this:
ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined!
ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
when the dell-laptop support is enabled without the necessary LED
support being enabled.
Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
Quoth Andrew:
- Most of MM. Still waiting for the poweroc guys to get off their
butts and review some threaded hugepages patches.
- alpha
- vfs bits
- drivers/misc
- a few core kerenl tweaks
- printk() features
- MAINTAINERS updates
- backlight merge
- leds merge
- various lib/ updates
- checkpatch updates
* akpm: (127 commits)
epoll: fix spurious lockdep warnings
checkpatch: add a --strict check for utf-8 in commit logs
kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete
llist-return-whether-list-is-empty-before-adding-in-llist_add-fix
wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack
fat: follow rename pack_hex_byte() to hex_byte_pack()
security: follow rename pack_hex_byte() to hex_byte_pack()
kgdb: follow rename pack_hex_byte() to hex_byte_pack()
lib: rename pack_hex_byte() to hex_byte_pack()
lib/string.c: fix strim() semantics for strings that have only blanks
lib/idr.c: fix comment for ida_get_new_above()
lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef
lib/bitmap.c: quiet sparse noise about address space
lib/spinlock_debug.c: print owner on spinlock lockup
lib/kstrtox: common code between kstrto*() and simple_strto*() functions
drivers/leds/leds-lp5521.c: check if reset is successful
leds: turn the blink_timer off before starting to blink
leds: save the delay values after a successful call to blink_set()
drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing
drivers/leds/leds-lm3530.c: add __devexit_p where needed
...
Change exported functions to use the device given as parameter
instead of the global one.
Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Witold Pilat <witold.pilat@gmail.com>
Cc: Lyall Pearce <lyall.pearce@hp.com>
Cc: Malte Starostik <m-starostik@versanet.de>
Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After an "unexpected" reboot, I found this Oops in my logs:
divide error: 0000 [#1] PREEMPT SMP=20
CPU 0=20
Modules linked in: lis3lv02d hp_wmi input_polldev [...]
Pid: 390, comm: modprobe Tainted: G C 2.6.39-rc7-wl+=20
RIP: 0010:[<ffffffffa014b427>] [<ffffffffa014b427>]
lis3lv02d_poweron+0x4e/0x94 [lis3lv02d]
RSP: 0018:ffff8801d6407cf8 EFLAGS: 00010246
RAX: 0000000000000bb8 RBX: ffffffffa014e000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffea00066e4708 RDI: ffff8801df002700
RBP: ffff8801d6407d18 R08: ffffea00066c5a30 R09: ffffffff812498c9
R10: ffff8801d7bfcea0 R11: ffff8801d7bfce10 R12: 0000000000000bb8
R13: 00000000ffffffda R14: ffffffffa0154120 R15: ffffffffa0154030
=46S: 00007fc0705db700(0000) GS:ffff8801dfa00000(0000) knlGS:0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f33549174f0 CR3: 00000001d65c9000 CR4: 00000000000406f0
Process modprobe (pid: 390, threadinfo ffff8801d6406000, task ffff8801d6b40=
000)
Stack:
ffffffffa0154120 62ffffffa0154030 ffffffffa014e000 00000000ffffffea
ffff8801d6407d58 ffffffffa014bcc1 0000000000000000 0000000000000048
ffff8801d8bae800 00000000ffffffea 00000000ffffffda ffffffffa0154120
Call Trace:
[<ffffffffa014bcc1>] lis3lv02d_init_device+0x1ce/0x496 [lis3lv02d]
[<ffffffffa01522ff>] lis3lv02d_add+0x10f/0x17c [hp_accel]
[<ffffffff81233e11>] acpi_device_probe+0x49/0x117
[...]
Code: 3a 75 06 80 4d ef 50 eb 04 80 4d ef 40 0f b6 55 ef be 21
00 00 00 48 89 df ff 53 18 44 8b 63 6c e8 3e fc ff ff 89 c1 44
89 e0 99 <f7> f9 89 c7 e8 93 82 ef e0 48 83 7b 30 00 74 2d 45
31 e4 80 7b=20
RIP [<ffffffffa014b427>] lis3lv02d_poweron+0x4e/0x94 [lis3lv02d]
RSP <ffff8801d6407cf8>
>From my POV, it looks like the hardware is not working as expected
and returns a bogus data rate. The driver doesn't check the result
and directly uses it as some sort of divisor in some places:
msleep(lis3->pwron_delay / lis3lv02d_get_odr());
Under this circumstances, this could very well cause the
"divide by zero" exception from above.
For now, I fixed it the easiest and most obvious way:
Check if the result is sane and if it isn't use a sane default
instead. I went for "100" in the latter case, simply because
/sys/devices/platform/lis3lv02d/rate returns it on a successful
boot.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Witold Pilat <witold.pilat@gmail.com>
Cc: Lyall Pearce <lyall.pearce@hp.com>
Cc: Malte Starostik <m-starostik@versanet.de>
Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These files aren't just exporting symbols -- they are also defining
a MODULE_LICENSE etc. so give them the full module.h file.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (45 commits)
acer-wmi: replaced the hard coded bitmap by the communication devices bitmap from SMBIOS
acer-wmi: check the existence of internal wireless device when set capability
acer-wmi: add ACER_WMID_v2 interface flag to represent new notebooks
sony-laptop:irq: Remove IRQF_DISABLED
asus-laptop: Add rfkill support for Pegatron Lucid tablet
asus-laptop: pega_accel - Report accelerometer orientation change through udev
asus-laptop: fix module description
asus-laptop: hide leds on Pegatron Lucid
asus-laptop: Pegatron Lucid accelerometer
asus-laptop: allow boot time control of Pegatron ALS sensor
Platform: samsung_laptop: add support for X520 machines.
platform: samsung_laptop: add dmi information for Samsung R700 laptops
hp_accel: Add axis-mapping for HP ProBook / EliteBook
hp_accel: Add a new PNP id
WMI: properly cleanup devices to avoid crashes
ideapad: remove sysfs node for cfg
ideapad: add debugfs support
ideapad: add event for Novo key
ideapad: change parameter of ideapad_sync_rfk_state
ideapad: define vpc commands
...
Before set communication devices state, we need query out all devices state to set
the states bitmap. That will be better use the devices bitmap in SMBIOS type Aah
instead of hardcode in driver.
Tested on Acer Travelmate 8572.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
That will be better to check the existence of internal wireless device
when we set wireless capability and generate killswitch for it. It can
avoid userland access wireless rfkill but the machine doesn't have internal
wireless device.
Tested on Acer Travelmate 8572
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There have new acer notebooks' BIOS provide new WMID_GUID3 and
ACERWMID_EVENT_GUID methods.
Some of machines still keep the old WMID_GUID1 method but more and
more machines were already removed old wmi methods from DSDT.
So, this patch add a new ACER_WMID_v2 interface flag to represent
new acer notebooks, the following is definition:
+ ACER_WMID:
It means this machine only provides WMID_GUID1/2 methods.
+ ACER_WMID_v2:
It means this machine provide new WMID_GUID3 and WMID_EVENT_GUID
methods.
Some ACER_WMID_v2 machines also provide old WMID_GUID1/2 methods,
but we still query/set communication device's state by new
WMID_GUID3 method.
Tested on Acer Travelmate 8572
Tested on Acer Aspire 4739Z
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).
So now this flag is a NOOP and can be removed.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add three new rfkill switches in this driver that are specific to
Pegatron Lucid tablet.
Please note that you might not need all three switches. For example if
you don't have a 3G module inside your tablet.
Also, on my device, the gpio for the wifi/bt module is connected to the
bluetooth line. Therefore to activate your wireless lan interface, you
need to use the "pega-bt" rfkill switch.
Finally, the rfkill switch only works before the wireless module is
loaded the first time. Unloading ath9k doesn't help, a reboot is
necessary.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Support the built-in accelerometer on the Lucid tablets as a standard
3-axis input device.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
my samsung laptop would be very happy if you add
these lines to the file drivers/platform/x86/samsung-laptop.c
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
My DMI model is this:
>dmesg |grep DMI
[ 0.000000] DMI present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. SR700/SR700, BIOS
04SR 02/20/2008
adding dmi information of Samsung R700 laptops
This adds the dmi information of Samsungs R700 laptops.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
New HP laptops assign a new PNP id "HPQ6000" for DriveGuard.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We need to remove devices that we destroy from the list, otherwise
we'll crash if there are more than one "_WDG" methods in DSDT.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=32052
Tested-by: Ilya Tumaykin <librarian_rus@yahoo.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add two nodes in debugfs which shows cfg value and its meaning,
and status info read from VPC2004.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Novo key is the Lenovo define key on every ideapads, which has two
definition. Long press and short click. Driver will report
KEY_PROG1 on short click and KEY_PROG2 when long press.
On pre-install OS for ideapads there are application waiting for
the event and there is no such application for Linux yet, so I
think to report KEY_PROG is fine in anyway.
Also change the scancode from hex to decimal because they are
related to vpc bit in notify function which is in decimal.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We need to save major device number to be able to use it for
unregister_chrdev() in ipc_module_exit().
ipc_module_init() must return 0 on success, not major device number.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch avoid a page fault in the ideapad-laptop extras when
turning the backlight power on or off.
Signed-off-by: Rene Bolldorf <xsecute@googlemail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There will be better to check the wireless capability flag
(ACER_CAP_WIRELESS) before register wireless rfkill because maybe
the machine doesn't have wifi module or the module removed by user.
Tested on Acer Travelmate 8572
Tested on Acer Aspire 4739Z
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
device_create returns &struct device pointer on success, or ERR_PTR() on error.
Thus if led_classdev_register fails, led_cdev->dev is always not NULL.
Thus to unregister a successful registered led_classdev, we should check
IS_ERR_OR_NULL macro for led_cdev->dev instead of checking if led_cdev->dev
is NULL or not.
we use IS_ERR_OR_NULL instead of IS_ERR because if we havn't call
led_classdev_register, the led_cdev->dev is NULL.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch fixes wrong test for successful registered led_classdev,
and also fixes a leak due to missing led_classdev_unregister call
for asus->kbd_led in asus_wmi_led_exit.
device_create returns &struct device pointer on success, or ERR_PTR() on error.
Thus if led_classdev_register fails, led_cdev->dev is always not NULL.
Thus to unregister a successful registered led_classdev, we should check
(!IS_ERR_OR_NULL(asus->tpd_led.dev)) instead of (asus->tpd_led.dev).
we use IS_ERR_OR_NULL instead of IS_ERR because if we havn't call
led_classdev_register, the led_cdev->dev is NULL.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
device_create returns &struct device pointer on success, or ERR_PTR() on error.
Thus if led_classdev_register fails, led_cdev->dev is always not NULL.
If IS_ERR(eeepc->tpd_led.dev) is ture, it means led_classdev_register fails.
If (asus->tpd_led.dev) is NULL, it means we call eeepc_led_exit before
calling led_classdev_register for &eeepc->tpd_led.
We only want to call led_classdev_unregister for sucessfully registered
led_classdev, then we should check (!IS_ERR_OR_NULL(eeepc->tpd_led.dev)).
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Ambient light sensor for Pegatron Lucid. Supports pre-existing
ls_switch sysfs interface to en/disable automatic control, and exports
the brightness from the device as "ls_value".
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Recognize the Pegatron Lucid tablets by their method signatures.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch depends on the "Platform: Brightness quirk for samsung
laptop driver" patch from Jason Stubbs. This patch adds a check for an
initial brightness level of 0; if the level is 0, this patch changes
the brightness level to 1 before the driver attempts to detect the
brightness quirk.
The Samsung N150 netbook experiences the brightness quirk. Without
Jason's patch, the only brightness levels available on the N150 are 0,
1, and 8. This patch ensures that, when the initial brightness level
is 0, the samsang-laptop driver detects the brightness quirk on the
N150, thereby making brightness levels 0 through 8 available.
Signed-off-by: John Serock <john.serock@gmail.com>
Acked-by: Jason Stubbs <jasonbstubbs@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This quirk fixes the wlan rfkill status on this machine. Without
it, wlan is permanently soft blocked whenever acer-wmi is loaded.
BugLink: https://bugs.launchpad.net/bugs/857297
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch supports Dell laptop with Synaptics and Alps touchpad chip
that with LED to indicate the functionality of touchpad is disabled or
enabled.
The command for touchpad LED is 0x97, and the data 1 means turn on the
touchpad LED, 2 means turn it off.
BTW, I add dell_quirks to white list those machines that supports this
behavior, so that the code won't affect those who don't have a touchpad LED
machine.
We can easily to turn it on/off by
echo 1 > /sys/class/leds/dell-laptop::touchpad/brightness
echo 0 > /sys/class/leds/dell-laptop::touchpad/brightness
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Event 0x82 is emitted whenever a backlight event happens (brightness
change, backlight on/off). For instance, when display is switched
off after a timeout, event 0x82 is emitted, and along with it a keypress
which switches the display back on again.
This patch adds 0x82 to the event ignore list so that the display stays
off when it is automatically switched off.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Test for features up-front to determine whether or not they are
supported, and avoid creating devices and proc files for
unsupported features.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some Toshiba models, notably those with the TOS1900 device, use
the SPFC method for HCI calls instead of GHCI. Test for this method
if GHCI isn't found, and if it exists use it for all HCI calls.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Now that we're using an acpi driver we already have a handle to
the namespace of the HCI call, so there's no need to test various
paths to the HCI call or even be aware of the path at all.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Many routines are returning success on failure, and those that are
indicating failure frequently return incorrect error codes. Fix
these up throughout the driver.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Changes toshiba_acpi to register an acpi driver and eliminates the
platform device it was using. Also eliminates most global
variables, moving them into toshiba_acpi_dev, along with some
other miscellaneous fixes and cleanup.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This is a follow-up for commit 78a7539b, which didn't cover the
Samsung N220 laptop. With this backlight brightness works nicely
on the N220 netbook.
Signed-off-by: Raul Gutierrez Segales <rgs@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch just adds the DMI info for the samsung laptop driver to work with
the NC210/NC110. It needs the brightness quirk patch for proper support.
Signed-off-by: Jason Stubbs <jasonbstubbs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
On some Samsung laptops the brightness regulation works slightly different.
All SABI commands except for set_brightness work as expected. The behaviour
of set_brightness is as follows:
- Setting a new brightness will only step one level toward the new brightness
level. For example, setting a level of 5 when the current level is 2 will
result in a brightness level of 3.
- A spurious KEY_BRIGHTNESS_UP or KEY_BRIGHTNESS_DOWN event is also generated
along with the change in brightness.
- Neither of the above two issues occur when changing from/to brightness
level 0.
This patch adds detection and a non-intrusive workaround for the above issues.
Signed-off-by: Jason Stubbs <jasonbstubbs@gmail.com>
Tested-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
samsung_init() should not return success if not all devices are initialized.
Otherwise, samsung_exit() will dereference sdev NULL pointers and others.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The min_brightness value of the sabi_config is incorrectly used in brightness
calculations. For the config where min_brightness = 1 and max_brightness = 8,
the user visible range should be 0 to 7 with hardware being set in the range
of 1 to 8. What is actually happening is that the user visible range is 0 to
8 with hardware being set in the range of -1 to 7.
This patch fixes the above issue as well as a miscalculation that would occur
in the case of min_brightness > 1.
Signed-off-by: Jason Stubbs <jasonbstubbs@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
patch works for me, but I need to add "acpi_backlight=vendor" to kernel
params
Signed-off-by: Smelov Andrey <xor29a@bk.ru>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.
Fix these broken references, sometimes by dropping the irrelevant text
they were part of.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The AMW0 function in acer-wmi works on Lenovo ideapad S205 for control
the wifi hardware state. We also found there have a 0x78 EC register
exposes the state of wifi hardware switch on the machine.
So, add this patch to support Lenovo ideapad S205 wifi hardware switch
in acer-wmi driver.
Reference: bko#37892
https://bugzilla.kernel.org/show_bug.cgi?id=37892
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Tested-by: Florian Heyer <heyho@flanto.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
It seems that aliases shouldn't contain spaces, as
module-init-tools uses them as delimeters in module.alias file
Signed-off-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In the case of ideapad_backlight_init() failure,
we need to free the resources allocated by ideapad_input_init().
Aslo drop __devexit annotation for ideapad_input_exit() because
we also call it in ideapad_acpi_add() error path.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
When enabling turbo, we need to set both the TDC and TDP bits. IIRC
only the TDC one actually matters, but fix it up anyway since the
current code is confusing.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some samsung latop of the N150/N2{10,20,30} serie are badly detected by the samsung-laptop platform driver, see bug # 36082.
It appears that N230 identifies itself as N150/N210/N220/N230 whereas the other identify themselves as N150/N210/220.
This patch attemtp fix#36082 allowing correct identification for all the said netbook model.
Reported-by: Daniel Eklöf <daniel@ekloef.se>
Signed-off-by: Thomas Courbon <thcourbon@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
All of these keys are being reported on the keyboard
controller but are also generating WMI events. Add them
to the legacy keymap to silence the noise.
BugLink: http://bugs.launchpad.net/bugs/815914
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We only care about if there is any successful match from the dmi table
or no match at all, we can make dmi_check_system return immediately if
we have a successful match instead of iterate thorough the whole table.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This adds backlight control on the Samsung Q10 laptop, which does not support
the SABI interface. Also tested successfully on the Dell Latitude X200.
Signed-off-by: Frederick van der Wyck <fvanderwyck@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The memory for td_info which is allocated in initialize_sensor()
should be properly kfreed in mid_thermal_probe() error patch and
mid_thermal_remove().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The N510 benefits from this code as well. Below is a patch to include support.
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Based on a patch from Nate Weibley. <nweibley@gmail.com>.
Cc: Nate Weibley <nweibley@gmail.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The T101MT Home/Express Gate key autorepeats in hardware, but
sparse-keymap does not support hardware autorepeat. Enable the
input core's software autorepeat to emulate the hardware behavior.
Normal hotkeys are autoreleased, so the behavior of these keys
will not be affected.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This key is different than other hotkeys, having seperate scan
codes for press, release, and hold, so it requires some special
filtering. Press and release events are passed on, and hold events
are ignored since sparse-keymap does not support hardware
autorepeat.
Note that "Home" in the context of this button doesn't mean the
same thing as the usual Home key, and it really isn't clear at
all what is meant by "Home". The manufacurer's description of the
button indicates that it should launch some sort of touch screen
settings interface on short press and apply a desktop rotation on
long press.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This is required for the T101MT home key, which behaves differently
than other hotkeys.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The code was completly broken, and should never had been sent
to the kernel. That's what happens when you write code without
hardware to test it.
Cc: stable@kernel.org
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
When acpi_backlight=vendor in cmdline or no backlight support in acpi video
device, ideapad-laptop will register backlight device and control brightness
and backlight power via the command in VPC2004.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Create /sys/devices/platform/ideapad/cfg for showing cfg value.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
After test, msi-laptop driver also can support MSI U270 netbook.
So, add MSI U270's dmi information to module alias and scm table
for support this machine.
Tested on MSI U270 netbook.
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Would you please consider applying the following patch adding support for
the Aspire 1810TZ BIOS v.1.3314 version to the acerhdf module and avoids the
following error:
acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, ple=
ase report, aborting!
Not sure about the other Aspire models, but it seems at least 1810T should
also be updated.
Signed-off-by: Julien Valroff <julien@kirya.net>
DEFINE_MUTEX() will automatically initialize buffer_mutex,
no need to call mutex_init() in dell_init().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
we can now autodetect internal 3G device and already have the threeg
rfkill device. So, we plan to remove threeg sysfs support for it's no
longer necessary.
We also plan to remove interface sysfs file that exposed which ACPI-WMI
interface that was used by acer-wmi driver. It will replaced by information
log when acer-wmi initial.
We keep it around for userspace compatibility reasons, schedule removal
in 2012.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
[ 191.310008] WARNING: kmemcheck: Caught 32-bit read from freed memory (f0d25f14)
[ 191.310011] c056d2f088000000105fd2f00000000050415353040000000000000000000000
[ 191.310020] i i i i f f f f f f f f f f f f f f f f f f f f f f f f f f f f
[ 191.310027] ^
[ 191.310029]
[ 191.310032] Pid: 737, comm: modprobe Not tainted 3.0.0-rc5+ #268 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h
[ 191.310036] EIP: 0060:[<f80b3104>] EFLAGS: 00010286 CPU: 0
[ 191.310039] EIP is at hp_wmi_perform_query+0x104/0x150 [hp_wmi]
[ 191.310041] EAX: f0d25601 EBX: f0d25f00 ECX: 000121cf EDX: 000121ce
[ 191.310043] ESI: f0d25f10 EDI: f0f97ea8 EBP: f0f97ec4 ESP: c173f34c
[ 191.310045] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 191.310046] CR0: 8005003b CR2: f540c000 CR3: 30f30000 CR4: 000006d0
[ 191.310048] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 191.310050] DR6: ffff4ff0 DR7: 00000400
[ 191.310051] [<f80b317b>] hp_wmi_dock_state+0x2b/0x40 [hp_wmi]
[ 191.310054] [<f80b6093>] hp_wmi_init+0x93/0x1a8 [hp_wmi]
[ 191.310057] [<c10011f0>] do_one_initcall+0x30/0x170
[ 191.310061] [<c107ab9f>] sys_init_module+0xef/0x1a60
[ 191.310064] [<c149f998>] sysenter_do_call+0x12/0x28
[ 191.310067] [<ffffffff>] 0xffffffff
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This reverts commit a3d77411e8,
as it causes a mess in the wireless rfkill status on some models.
It is probably a bad idea to toggle the rfkill for all dell models
without the respect to the claim that it is hardware-controlled.
Cc: stable@kernel.org
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some newly added drivers do not set backlight type, as a result
/sys/class/backlight/<backlight>/type shows incorrect backlight type.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Yin Kangkai <kangkai.yin@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Handle events 0x4010 and 0x4011 so that we do not pester users about them.
These events report when the thinkpad is docked/undocked to a native
hotplug dock (i.e. one that does not need ACPI handling, nor is represented
in the ACPI device tree). Such docks are based on USB 2.0/3.0, and also
work as port replicators.
We really want a proper dock class to report these, or at least new input
EV_SW events. Since it is not clear which one to use yet, keep reporting
them as vendor-specific ThinkPad events.
WARNING: As defined by the thinkpad-acpi sysfs ABI rules of engagement, the
vendor-specific events will be REMOVED as soon as generic events are made
available (duplicate events are a big problem), with an appropriate update
to the thinkpad-acpi sysfs/event ABI versioning. Userspace is already
prepared to provide easy backwards compatibility for such changes when
convenient to the distro (see acpi-fakekey).
* Event 0x4010: docking to hotplug dock/port replicator
* Event 0x4011: undocking from hotplug dock/port replicator
Typical usecase would be to trigger display reconfiguration.
Reports mention T410, T510, and series 3 docks/port replicators. Special
thanks to Robert de Rooy for his extensive report and analysis of the
situation.
http://www.thinkwiki.org/wiki/ThinkPad_Port_Replicator_Series_3http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Series_3http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3_for_Mobile_Workstationshttp://lenovoblogs.com/insidethebox/?p=290
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Claudius Hubig <claudiushubig@chubig.net>
Reported-by: Doctor Bill <docbill@gmail.com>
Reported-by: Korte Noack <gbk.noack@gmx.de>
Reported-by: Robert de Rooy <robert.de.rooy@gmail.com>
Reported-by: Sebastian Will <swill@csail.mit.edu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
data is not freed in the error case of
compal_probe().
Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Handle some user interface events from the newer Lenovo models. We are likely
to do something smart with these events in the future, for now, hide the ones
we are already certain about from the user and userspace both.
* Events 0x6000 and 0x6005 are key-related. 0x6005 is not properly identified
yet. Ignore these events, and do not report them.
* Event 0x6040 has not been properly identified yet, and we don't know if it
is important (looks like it isn't, but still...). Keep reporting it.
* Change the message the driver outputs on unknown 0x6xxx events, as all
recent events are not related to thermal alarms. Degrade log level from
ALERT to WARNING.
Thanks to all users who reported these events or asked about them in a number
of mailing lists. Your help is highly appreciated, even if I did took a lot of
time to act on them. For that I apologise.
I will list those that identified the reasons for the events as "reported-by",
and I apologise in advance if I leave anyone out: it was not done on purpose, I
made the mistake of not properly tagging all event report emails separately,
and might have missed some.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Markus Malkusch <markus@malkusch.de>
Reported-by: Peter Giles <g1l3sp@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix a bitwise bug that was found by Joern Heissler, it must be OR
but not AND when we query current device state.
Acked-by: Joern Heissler <linux-acpi@joern.heissler.de>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
acer-wmi is indiscriminately using the device state from hotkey
events to update the various rfkill states. On the Aspire 1830 this
can result in a soft block on the wlan when the touchpad hotkey is
pressed, as it is reporting a non-zero device state that does not
reflect the wireless status. To fix this, only update rfkill states
when a wlan or bluetooth hotkey is pressed.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits)
acer-wmi: support integer return type from WMI methods
msi-laptop: fix section mismatch in reference from the function load_scm_model_init
acer-wmi: support to set communication device state by new wmid method
acer-wmi: allow 64-bits return buffer from WMI methods
acer-wmi: check the existence of internal 3G device when set capability
platform/x86:delete two unused variables
support wlan hotkey on Acer Travelmate 5735Z
platform-x86: intel_mid_thermal: Fix memory leak
platform/x86: Fix Makefile for intel_mid_powerbtn
platform/x86: Simplify intel_mid_powerbtn
acer-wmi: Delete out-of-date documentation
acerhdf: Clean up includes
acerhdf: Drop pointless dependency on THERMAL_HWMON
acer-wmi: Update MAINTAINERS
wmi: Orphan ACPI-WMI driver
tc1100-wmi: Orphan driver
acer-wmi: does not allow negative number set to initial device state
platform/oaktrail: ACPI EC Extra driver for Oaktrail
thinkpad_acpi: Convert printks to pr_<level>
thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning
...
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI EC: remove redundant code
ACPI: Add D3 cold state
ACPI: processor: fix processor_physically_present in UP kernel
ACPI: Split out custom_method functionality into an own driver
ACPI: Cleanup custom_method debug stuff
ACPI EC: enable MSI workaround for Quanta laptops
ACPICA: Update to version 20110413
ACPICA: Execute an orphan _REG method under the EC device
ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place
ACPICA: Update internal address SpaceID for DataTable regions
ACPICA: Add more methods eligible for NULL package element removal
ACPICA: Split all internal Global Lock functions to new file - evglock
ACPI: EC: add another DMI check for ASUS hardware
ACPI EC: remove dead code
ACPICA: Fix code divergence of global lock handling
ACPICA: Use acpi_os_create_lock interface
ACPI: osl, add acpi_os_create_lock interface
ACPI:Fix goto flows in thermal-sys
Acer WMID_GUID1/2 method's return value was declared to integer
type on Gateway notebook.
So, add this patch for support integer return type.
Reference: bko#33032
https://bugzilla.kernel.org/show_bug.cgi?id=33032
Tested on Gateway NV5909H laptop
Tested-by: Filipus Klutiero <chealer@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There have section mismatch warning message shows up when building
the kernel with make CONFIG_DEBUG_SECTION_MISMATCH=y.
The problem is the load_scm_model_init() calls msi_laptop_input_setup()
which is an __init function, but load_scm_model_init() lacks a __init
annotation.
This patch add __init on load_scm_model_init() to avoid warning message.
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Have many Acer notebooks' BIOS already support new WMID_GUID3 method.
On those machines, that will be better set communication device by
evaluate WMID_GUID3 method.
Tested on Acer Travelmate 8572
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acer WMID_GUID1/2 method's return buffer was declared to 64-bits
on some Acer notebook, but WMI method only use 32-bits in return
buffer.
So, add this patch for allow 64-bits return buffer.
Reference: bko#34142
https://bugzilla.kernel.org/show_bug.cgi?id=34142
Tested on Acer Travelmate 5735Z-452G32Mnss
Tested-by: Melchior FRANZ <melchior.franz@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
That will be better to check the existence of internal 3G device when
we set threeg capability and generate killswitch for threeg. It can
avoid userland access 3G rfkill but the machine doesn't have internal
3G device.
Reference: bko#32862
https://bugzilla.kernel.org/show_bug.cgi?id=32862
Tested on Acer Aspire 8930G, Acer Travelmate 8572
Tested-by: Hector Martin <hector@marcansoft.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
variable handle is not used in these two functions,
just delete them.
Signed-off-by: Weiping Pan <panweiping3@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
On an Acer Travelmate 5735Z-452G32Mnss the WLAN-enable/disable key
doesn't send 0x1 as acpi event key code, but 0x3. This patch also
makes the module ignore hotkey acpi events for functions that are
already handled without. This avoids warning message "keyboard:
can't emulate rawmode for keycode 240".
Signed-off-by: Melchior FRANZ <mfranz@aon.at>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch:
1. Removes unnecessay #defines
2. Removes 'mfld_pb_priv' data structure which results in simpler error
handling and less memory allocations.
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
* The acerhdf driver isn't an ACPI driver, so it needs not include
<acpi/acpi_drivers.h>. All it uses is ec_read() and ec_write(), for
which <linux/acpi.h> is sufficient.
* I couldn't find any reason why <linux/fs.h> and <linux/sched.h> were
included.
This should avoid unneeded rebuilds of the acerhdf driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The THERMAL_HWMON config option simply exposes the thermal zone
temperature values and limits to user-space. It makes no sense for a
kernel driver to depend on this.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The driver set module parameter value: mailled, threeg and brightness
to BIOS by evaluate wmi method when driver was initialed. The default
values for those parameters are -1, so, that will be better don't set
negative value to BIOS.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This driver implements an Extra ACPI EC driver for products based on Intel
Oaktrail platform.
This driver does below things:
1. registers itself in the Linux backlight control in
/sys/class/backlight/intel_oaktrail/
2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/
for these components: wifi, bluetooth, wwan (3g), gps
Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com>
[Extracted from a bigger patch by Yin Kangkai, this version leaves out some
sysfs bits that probably want to be driver managed, and ACPI i2c enumeration]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add pr_fmt.
Removed local TPACPI_<level> #defines, convert to pr_<level>.
Neaten dbg_<foo> macros.
Added a few missing newlines to logging messages.
Added static inline str_supported for !CONFIG_THINKPAD_ACPI_DEBUG vdbg_printk
defect reported by Sedat Dilek <sedat.dilek@googlemail.com>.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Move TPACPI_HANDLE declaration into #ifdef block
and neaten it a bit.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use the current logging styles.
Remove local #define PREFIX.
Add pr_fmt.
Convert printk to pr_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add pr_fmt.
Remove local MY_<foo> #defines.
Convert printks to pr_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use the more normal logging styles.
Removed now unused local logging #defines.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Added pr_fmt.
Removed now unused #define DRV_PFX
Convert dprintk to pr_debug.
Convert printks to pr_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Just making it a bit more like other logging message uses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add #define pr_fmt(fmt) "%s: " fmt, __func__
to prefix function name to each output message.
Convert printks to pr_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add pr_fmt to prefix the logging messages.
Convert printk to pr_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Remove hard coded prefixes from logging messages.
Neaten RTL_DEBUG macro and uses.
Convert __FUNCTION__ to __func__.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Added pr_fmt and converted printks to pr_<level>.
Removed now unused PREFIX and UNIMPL #defines.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Added pr_fmt, converted printks and removed
hard coded prefixes.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Added pr_fmt, converted printks and removed
hard coded prefixes.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Just a trivial pr_warning to pr_warn conversion
while adding a few missing newlines.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add pr_fmt.
Remove hard coded prefixes and use pr_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add pr_fmt, prefixes each log message.
Convert printks to pr_<level>.
Convert pr_warning to pr_warn.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Convert pr_warning to pr_warn.
Add some missing newlines to pr_<level> uses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The presense of a writeq() implementation on 32-bit x86 that splits the
64-bit write into two 32-bit writes turns out to break the mpt2sas driver
(and in general is risky for drivers as was discussed in
<http://lkml.kernel.org/r/adaab6c1h7c.fsf@cisco.com>). To fix this,
revert 2c5643b1c5 ("x86: provide readq()/writeq() on 32-bit too") and
follow-on cleanups.
This unfortunately leads to pushing non-atomic definitions of readq() and
write() to various x86-only drivers that in the meantime started using the
definitions in the x86 version of <asm/io.h>. However as discussed
exhaustively, this is actually the right thing to do, because the right
way to split a 64-bit transaction is hardware dependent and therefore
belongs in the hardware driver (eg mpt2sas needs a spinlock to make sure
no other accesses occur in between the two halves of the access).
Build tested on 32- and 64-bit x86 allmodconfig.
Link: http://lkml.kernel.org/r/x86-32-writeq-is-broken@mdm.bga.com
Acked-by: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Acked-by: James Bottomley <James.Bottomley@parallels.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits)
drivers/gpu/drm/radeon/atom.c: fix warning
drm/radeon/kms: bump kms version number
drm/radeon/kms: properly set num banks for fusion asics
drm/radeon/kms/atom: move dig phy init out of modesetting
drm/radeon/kms/cayman: fix typo in register mask
drm/radeon/kms: fix typo in spread spectrum code
drm/radeon/kms: fix tile_config value reported to userspace on cayman.
drm/radeon/kms: fix incorrect comparison in cayman setup code.
drm/radeon/kms: add wait idle ioctl for eg->cayman
drm/radeon/cayman: setup hdp to invalidate and flush when asked
drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked
agp/uninorth: Fix lockups with radeon KMS and >1x.
drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only
drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices
drm/radeon/kms: fixup eDP connector handling
drm/radeon/kms: bail early for eDP in hotplug callback
drm/radeon/kms: simplify hotplug handler logic
drm/radeon/kms: rewrite DP handling
drm/radeon/kms/atom: add support for setting DP panel mode
drm/radeon/kms: atombios.h updates for DP panel mode
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
b43: fix comment typo reqest -> request
Haavard Skinnemoen has left Atmel
cris: typo in mach-fs Makefile
Kconfig: fix copy/paste-ism for dell-wmi-aio driver
doc: timers-howto: fix a typo ("unsgined")
perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
treewide: fix a few typos in comments
regulator: change debug statement be consistent with the style of the rest
Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
audit: acquire creds selectively to reduce atomic op overhead
rtlwifi: don't touch with treewide double semicolon removal
treewide: cleanup continuations and remove logging message whitespace
ath9k_hw: don't touch with treewide double semicolon removal
include/linux/leds-regulator.h: fix syntax in example code
tty: fix typo in descripton of tty_termios_encode_baud_rate
xtensa: remove obsolete BKL kernel option from defconfig
m68k: fix comment typo 'occcured'
arch:Kconfig.locks Remove unused config option.
treewide: remove extra semicolons
...
The ACPI notification we get from rfkill events on these machines gives
us all the information we need to identify the port that's changed. Do
so rather than assuming that it's always bus 1.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The new style brightness control provides an operating range of 9 values
(seems consistent over a large number of models sharing the same
brightness control methods).
Read and use the minimum and maximum values to limit the backlight
interface between those boundaries.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Check if we were successful in setting the requested brightness and
report failure in that case.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The newer Lenovo ThinkPads have HKEY HID of LEN0068 instead
of IBM0068. Added new HID so that thinkpad_acpi module will
auto load on these newer Lenovo ThinkPads.
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
MXM is a laptop graphics card form-factor + interface specification,
this adds an initial stub driver to talk to the MXM WMI interface.
The only method used is the MUX switching method needed to do switchable
graphics on the nvidia chipsets.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
thinkpad-acpi fails to load with newer Thinkpad X201s BIOS
acer-wmi: Fix capitalisation of GUID in module alias
sony-laptop: keyboard backlight fixes
sony-laptop: only show the handles sysfs file in debug mode
samsung-laptop: set backlight type
staging: samsung-laptop has moved to platform/x86
samsung-laptop: Samsung R410P backlight driver
samsung-laptop: add support for N230 model
platform-drivers: x86: pmic: Restore the dropped buslock/unlock
sony-laptop: fix early NULL pointer dereference
msi-laptop: fix config-dependent build error
eeepc-wmi: add keys found on EeePC 1215T
asus-wmi: swap input name and phys
asus-laptop: remove removed features from feature-removal-schedule.txt
The new BIOS has a slightly different EC version string.
From a1541710300b083a1a9acff2890d721d15ede62b Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Sun, 13 Mar 2011 23:46:22 -0700
Subject: [PATCH] thinkpad-acpi: Some BIOS versions don't end in WW, remove check
My X201s BIOS version string is 6QET46V1 (1.16 ). The
EC version string is 6QHT28WW-1.09. The driver was requiring that both
of these have 'WW' in positions 6 and 7. I don't know what the
significance of having 'V1' there instead is, but removing the test
makes the driver load on my machine.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
wmi:6AF4F258-B401-42Fd-BE91-3D4AC2D7C0D3 needs to be
wmi:6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 in module alias for acer-wmi is
automatically loaded.
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Restore the original state on module removal, set the latest values on
resume.
When setting the keyboard backlight mode try to turn on/off backlight
immediately.
[malattia@linux.it: patch taken from a largely modified sony-laptop.c,
ported and slightly modified to use defines already available.]
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
It makes no sense to expose this type of information to userspace unless
the driver was explicitly loaded with the debug option.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cherry-picked from drivers/staging/samsung-laptop/samsung-laptop.c
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Here's a trivial patch which adds support to the backlight device found
in Samsung R410 Plus laptops.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[mmarek: cherry-picked from staging commit d542f180]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[mmarek: cherry-picked from staging commit 0789b003]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
When I added the buslock/unlock mechanism to the pmic code in order to
get rid of the horrible work queue stuff, stupid me missed to add the
new callbacks to the irq_chip.
In consequence Andrew removed the unused functions, but I missed that.
Add them back and hook them up proper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The SNC acpi driver could get early notifications before it fully
initializes and that could lead to dereferencing the sony_nc_handles
structure pointer that is still NULL at that stage.
Make sure we return early from the handle lookup function in these
cases.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The msi-laptop driver uses input_*() and sparse_keymap_*() interfaces.
It should depend on the INPUT subsystem being present and select
INPUT_SPARSEKMAP so that those interfaces are present.
ERROR: "input_free_device" [drivers/platform/x86/msi-laptop.ko] undefined!
ERROR: "input_register_device" [drivers/platform/x86/msi-laptop.ko] undefined!
ERROR: "sparse_keymap_setup" [drivers/platform/x86/msi-laptop.ko] undefined!
ERROR: "input_allocate_device" [drivers/platform/x86/msi-laptop.ko] undefined!
ERROR: "sparse_keymap_report_event" [drivers/platform/x86/msi-laptop.ko] undefined!
ERROR: "input_unregister_device" [drivers/platform/x86/msi-laptop.ko] undefined!
ERROR: "sparse_keymap_free" [drivers/platform/x86/msi-laptop.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: "Lee, Chun-Yi" <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
static void acpi_ec_gpe_query(void *ec_cxt);
-> The function is right above this declaration -> not needed.
poll_force is also not used, cleaned up in ec.c and its users:
compal-laptop and msi-laptop.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
This is what I intended to do since:
1) the driver handles variable waits just fine, and
2) interruptible waits aren't reported as load in the load avg.
Reported-and-tested-by: Andreas Hartmann <andihartmann@freenet.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acer WMI hotkey event's result include current device status, just
need sync the status to killswitch after acer-wmi driver receive
hotkey event but not always poll device status. This is good for
performance.
But, if use EC raw mode, Acer BIOS will not emit wmi event and
leave EC to control device status. So, still startup polling job
when doesn't detect WMI event GUID or user choice to use ec_raw_mode.
Tested on Acer TravelMate 8572 notebook.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acer BIOS keeps devices state when system reboot, but reset to default
device states (Wlan on, Bluetooth off, wwan on) if system cold boot.
That means BIOS's initial state is not always real persistence.
So, removed rfkill_init_sw_state because it sets initial state to
persistence then replicate to other new killswitch when rfkill-input
enabled.
After removed it, acer-wmi set initial soft-block state after rfkill
register, and doesn't allow set_block until rfkill initial finished.
Reference: bko#31002
https://bugzilla.kernel.org/show_bug.cgi?id=31002
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: OldÅich JedliÄka <oldium.pro@seznam.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In the earlier check we assumed that "obj" could be NULL. I looked at
some of the other places that call evaluate_object() and they check
for NULL as well.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
"err" needs to be signed for the error handling to work.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
dmi_check_system() walks the table running matching functions until
someone returns non zero or we hit the end.
This patch makes dmi_check_cb to return 1 so dmi_check_system() return
immediately when a match is found.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
I found the commit 80183a4b
"compal-laptop/fujitsu-laptop/msi-laptop: make dmi_check_cb to return 1 instead of 0"
has wrong patch merge.
The original patch change the return value for dmi_check_cb():
https://lkml.org/lkml/2010/7/2/88
But commit 80183a4b changed the return value for set_backlight_level.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This adds the samsung-laptop driver to the kernel. It now supports
all known Samsung laptops that use the SABI interface.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch change WMI ID to upper characters. With this patch module
acer-wmi is automatically loaded when WMI ID is detected.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch deactive mail led when laptop is going to hibernete/suspend
or power off. After resume from hibernate/suspend correctly restore
mail led state.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
MSI BIOS's raw behavior is send out KEY_TOUCHPAD_TOGGLE key when user
pressed touchpad hotkey.
Actually, we can capture the real touchpad status by read 0xE4 EC address
on MSI netbook/notebook. So, add msi-laptop input device for send out
KEY_TOUCHPAD_ON or KEY_TOUCHPAD_OFF key when user pressed Fn+F3 touchpad
hotkey. It leave userland applications to know the real touchpad status.
Tested on MSI netbook U-100, U-115, U160(N051), U160DX, N014, N034
Tested on MSI notebook CR620
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Set the touchpad toggle key code from F22 to KEY_TOUCHPAD_TOGGLE,
and userspace should use udev's key re-mapping facilities while X
is unable to process keycodes above 255 to adjust to the keycode.
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In the original code, if "device_enum" was NULL then it would
dereference it when it printed the error message.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Return -ENOMEM if kzalloc() fails. The callers already handle error
returns.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There were two places in sony_nc_add() where we returned zero on failure
instead of a negative error code.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Sparse complains that these variables should be static.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=25922
On ideapad Y530, the brightness key notify will be blocked if the last notify
is not responsed by getting the brightness value. Read value when we get the
notify shall fix the problem and will not have any difference on other ideapads.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix eeepc-wmi build when CONFIG_HOTPLUG_PCI is not enabled:
eeepc-wmi.c:(.text+0x3bc5e9): undefined reference to `pci_hp_deregister'
eeepc-wmi.c:(.text+0x3bcca4): undefined reference to `__pci_hp_register'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
I also found some leds ids (0x00020011-0x00020016 and 0x00040015),
but since they are not really present on the notebook,
I can't guess their name .
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Introduce a new driver for Asus Notebooks shipped with
a WMI device instead of the old ACPI device. The WMI
device is almost the same as the one present in Eee PC,
but the event guid and the keymap are different.
The keymap comes from asus-laptop module.
On Asus notebooks, when you call the WMI device, you always
need a 64bit buffer, even if you only want to get the state
of a device (tested on a G73).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
INIT() call is needed to enable hotkeys on G73
SPEC() and SFUN() allow us to know more about
available features.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This is tricky, new WMI aware notebooks seems to use
0x53545344 while Eee PCs are using 0x53544344. But there
is no way to know if there is an Eee PC in that wild that is
using 0x53545344 or a notebook using 0x53544344. So the
driver try to guess the available DSTS method ... But most Eee PCs
never return 0xFFFFFFFE when a method is not available, they return
0 instead (and that's useless).
So, first, try 0x53544344 then 0x53545344. We will find
a better way when we got more data.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch create a single function to call the
WMI methods. This function handle inexistent methods (when
implemented by the WMI devices, and this is not the case on
Eee PCs), ACPI errors, etc..
Also pack struct bios_arg, and make sure that we always send
a 64bit buffer when calling a WMI method, because this is
needed on Asus notebooks.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
First, this allow use to remove the custom asusrfkill_wlan_query,
but this will also allow us to give struct asus_wmi * to
get_devstate/set_devstate later.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
eeepc-wmi module on Asus notebooks, and we want to
keep the eeepc-wmi module for backward compatibility,
this patch introduce a new module, named asus-wmi, that
will be used by eeepc-wmi and the new Asus Notebook WMI
Driver.
eeepc-wmi's input device strings (device name and phys)
are kept, but rfkill and led names are changed (s/eeepc/asus/).
This should not break anything since rfkill are used by type or
index, not by name, and the eeepc::touchpad led wasn't working
correctly before 2.6.39 anyway.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
a module named eeepc-laptop on Asus Notebooks, start by
copying all the code to asus-wmi.c.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This is the basic thermal sensor driver for Intel MID platform using the
Medfield chipset. It plugs in via the thermal drivers and provides sensor
readings for the device sensors.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some recent HP laptops use a new wireless query command type 0x1b.
Add support for it. Tested on HP Mini 5102.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
hp_wmi_rfkill_setup cleans up after itself now, so failing completely is
no longer necessary.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
NULLify rfkill pointers during initialization. This prevents dereference
of invalid pointer in case the driver is rebound and some rfkill device
isn't detected anymore. Clear them also in hp_wmi_rfkill_setup failure
path so that an rfkill initialization failure doesn't need to be fatal
for the whole driver.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Split initialization of rfkill devices from hp_wmi_bios_setup() to
hp_wmi_rfkill_setup(). This makes the code somewhat cleaner, especially
with the future command 0x1b rfkill support.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Split buffersize parameter of hp_wmi_perform_query to insize and
outsize. Existing callers are changed to use the same value for insize
and outsize to avoid any regressions, with the exception of
hp_wmi_set_block where the output buffer is unused and therefore outsize
is set to 0 (this change is not seen by BIOS code).
The maximum input buffer size is kept at 4 bytes as per struct
bios_args. Some commands exist that take longer buffers, but they
haven't been implemented. The data portion of bios_args can be trivially
made dynamically allocated later when such larger buffers become needed.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Remove the status variable from hp_wmi_perform_query which holds the
return value from wmi_evaluate_method(). It is never checked as the
function bails out if the output buffer hasn't been allocated which
indicates the call failed.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Check BIOS provided return value code in hp_wmi_perform_query and print
a warning on error. Printing is suppressed for HPWMI_RET_UNKNOWN_CMDTYPE
which is returned when the command type is unsupported.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Reasonably recent Vaios have a 0x12f or 0x137 handler that exposes a
fine lid backlight regulation with values ranging from 0 to 255.
The patch is based on findings and code from Javier Achirica
<achirica@gmail.com> and Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Recent Vaios have the opportunity to control the keyboard backlight via
ACPI calls to the SNC device.
Introduce two module parameters to control how keyboard backlight should
be set at module loading (default to on and with 10 seconds timeout).
Tested-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Avoid calling into acpi each time we need to lookup a method handle
and report the available handles to ease collection of information when
debugging issues. Also move initialization of the platform driver
earlier to allow adding files from other setup functions.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There is not much use for these events in userspace and handling the
events themselves seems to get in the way of the actual activation of
the rf devices. The SNC device doesn't expose them already.
https://bugzilla.kernel.org/show_bug.cgi?id=15303
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
intel_mid_powerbtn.c uses input interfaces, so it should depend
on INPUT to fix build errors when CONFIG_INPUT is not enabled:
intel_mid_powerbtn.c:(.text+0x56ca8f): undefined reference to `input_event'
intel_mid_powerbtn.c:(.devinit.text+0x2e7b4): undefined reference to `input_allocate_device'
intel_mid_powerbtn.c:(.devinit.text+0x2e7ff): undefined reference to `input_set_capability'
intel_mid_powerbtn.c:(.devinit.text+0x2e84a): undefined reference to `input_register_device'
intel_mid_powerbtn.c:(.devinit.text+0x2e88b): undefined reference to `input_free_device'
intel_mid_powerbtn.c:(.devexit.text+0x42f0): undefined reference to `input_unregister_device'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Hong Liu <hong.liu@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Enable volume up and down hotkeys on WMI events
GUID 284A0E6B-380E-472A-921F-E52786257FB4 and
GUID 02314822-307C-4F66-bf0E-48AEAEB26CC8.
Also works around a firmware bug where the _WED method
should return an integer containing the key code and in fact
the method returns the key code in element zero of a buffer.
BugLink: http://bugs.launchpad.net/bugs/701530
BugLink: http://bugs.launchpad.net/bugs/676997
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The power button is connected to MSIC on Medfield, we will get two
interrupts from IOAPIC when pressing or releasing the power button.
Signed-off-by: Hong Liu <hong.liu@intel.com>
[Minor fixes as noted by Dmitry]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
These keys are supposed to be handled by any software
using the camera (like webKam or cheese...). They can
also be used to actually move the camera when possible.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Each device seems to be in a "group" (devid >> 16 & 0xFF).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
I should have done that one year ago, so it's more than
time to do it.
These two features use non-standard interfaces. There are the
only features that really need multiple path to guess what's
the right method name on a specific laptop.
Removing them allow to remove a lot of code an significantly
clean the driver.
This will affect the backlight code which won't be able to know
if the backlight is on or off.
The platform display file will also be write only (like the one
in eeepc-laptop).
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Asus took the DSDT from another model (L84F), made some change
to make it work, but forgot to remove WLED method (the laptop
doesn't have a wireless card). They even didn't change the model
name.
ref: https://bugzilla.kernel.org/show_bug.cgi?id=25712
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This key should power off the backlight, not the display,
it is also used in acpi/video.c to do the same thing.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
I checked some more DSDT, and it seems that I wasn't
totally right about the meaning of DSTS return value.
Bit 0 is clearly the status of the device, and I discovered
that bit 16 is set when the device is present.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
eeepc_wmi_get_devstate returns an acpi_status, so each
call need extra logic to handle the return code. This
patch add a simple getter, returning a boolean (or a
negative error code).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
\AMW0.WMBC, which is the main method that we use,
is not reentrant. When wireless hotpluging is enabled,
toggling the status of the wireless device using WMBC will
trigger a notification and the notification handler need to
call WMBC again to get the new status of the device, this
will trigger the following error:
ACPI Error (dswload-0802): [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20100428/psloop-231)
ACPI Error (psparse-0537): Method parse/execution failed [\AMW0.WMBC] (Node f7023b88), AE_ALREADY_EXISTS
ACPI: Marking method WMBC as Serialized because of AE_ALREADY_EXISTS error
Since there is currently no way to tell the acpi subsystem to mark
a method as serialized, we do it in eeepc-wmi.
Of course, we could let the first call fail, and then it would work,
but it doesn't seems really clean, and it will make the first
WMBC call return a random value.
This patch was tested on EeePc 1000H with a RaLink RT2860
wireless card using the rt2800pci driver. rt2860sta driver
seems to deadlock when we remove the pci device...
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Implement wireless like hotplug handling (code stolen from eeepc-laptop).
Reminder: on some models rfkill is implemented by logically unplugging the
wireless card from the PCI bus. Despite sending ACPI notifications, this does
not appear to be implemented using standard ACPI hotplug - nor does the
firmware provide the _OSC method required to support native PCIe hotplug.
The only sensible choice appears to be to handle the hotplugging directly in
the platform driver.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The OLPC XO-1.5 has an ebook switch, triggered when the laptop
screen is rotated then folding down, converting the device into ebook
form.
This switch is exposed through ACPI. Add a driver that exposes it
to userspace as an input device.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There may be multiple ways of controlling the backlight on a given
machine. Allow drivers to expose the type of interface they are
providing, making it possible for userspace to make appropriate policy
decisions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I suspect that the "lis3lv02d" driver name is a legacy from before
the split into several modules. Use a specific name for the hp_accel
driver, for better error messages and easier investigation of issues.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
It is found on Dell Inspiron 1018 that the firmware reports that the hardware
killswitch is not supported. This makes the rfkill key not functional.
This patch forces the driver to toggle the firmware rfkill status in the case
that the hardware killswitch is indicated as unsupported by the firmware.
Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Tested-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some thinkpad hotkeys report key codes like KEY_FN_F8 when something
like KEY_VOLUMEDOWN is desired. Always provide the scan codes in
addition to the key codes to assist with debugging these issues. Also
send the scan code before the key code to match what other drivers do,
as some userspace utilities expect this ordering.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be
6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: stable@kernel.org
Most platform/x86 drivers that use INPUT_SPARSEKMAP also depend on INPUT,
so do the same for ideapad-laptop. This fixes a kconfig warning and
subsequent build errors when CONFIG_INPUT is disabled.
warning: (ACER_WMI && ASUS_LAPTOP && DELL_WMI && HP_WMI && PANASONIC_LAPTOP && IDEAPAD_LAPTOP && EEEPC_LAPTOP && EEEPC_WMI && MSI_WMI && TOPSTAR_LAPTOP && ACPI_TOSHIBA) selects INPUT_SPARSEKMAP which has unmet direct dependencies (!S390 && INPUT)
ERROR: "input_free_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_register_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_allocate_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_unregister_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Don't allow everybody to change ACPI settings. The comment says that it
is done deliberatelly, however, the comment before disp_proc_write()
says that at least one of these setting is experimental.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There is no need to install a chained handler for this hardware. This
is a plain x86 IOAPIC interrupt which is handled by the core code
perfectly fine. There is nothing special about demultiplexing these
gpio interrupts which justifies a custom hack. Replace it by a plain
old interrupt handler installed with request_irq. That makes the code
agnostic about the underlying primary interrupt hardware. The overhead
for this is minimal, but it gives us the advantage of accounting,
balancing and to detect interrupt storms. gpio interrupts are not
really that performance critical.
Patch fixups from akpm
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The set_type function of the pmic irq chip is a horrible hack. It
schedules work because it cannot access the scu chip from the set_type
function. That breaks the assumption, that the type is set after
set_type has returned.
irq_chips provide buslock functions to avoid the above. Convert the
driver to use the proper model.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Old functions will go away soon. Remove the stray semicolons while at
it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
commit 456dc301([PATCH] intel_pmic_gpio: modify EOI handling following
change of kernel irq subsystem) changes
- desc->chip->eoi(irq);
+
+ if (desc->chip->irq_eoi)
+ desc->chip->irq_eoi(irq_get_irq_data(irq));
+ else
+ dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);
With the following explanation:
"Latest kernel has many changes in IRQ subsystem and its interfaces,
like adding irq_eoi" for struct irq_chip, this patch will make it
support both the new and old interface."
This is completely bogus.
#1) The changelog does not match the patch at all
#2) This driver relies on the assumption that it sits behind an eoi
capable interrupt line. If the implementation of the underlying
chip changes from eoi to irq_eoi then this driver has to follow
that change and not add a total bogosity.
Remove the sillyness and retrieve the interrupt data from irq_desc
directly. No need to got through circles to look it up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
busy_loop() returns negative error code, thus change err variable
from u32 to int to properly propagate correct error code.
Also remove unneeded initialization for err and i variables.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including linux/dmi.h once in drivers/platform/x86/acer-wmi.c is enough.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits)
ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
ACPI: fix resource check message
ACPI / Battery: Update information on info notification and resume
ACPI: Drop device flag wake_capable
ACPI: Always check if _PRW is present before trying to evaluate it
ACPI / PM: Check status of power resources under mutexes
ACPI / PM: Rename acpi_power_off_device()
ACPI / PM: Drop acpi_power_nocheck
ACPI / PM: Drop acpi_bus_get_power()
Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
ACPI / Fan: Rework the handling of power resources
ACPI / PM: Register power resource devices as soon as they are needed
ACPI / PM: Register acpi_power_driver early
ACPI / PM: Add function for updating device power state consistently
ACPI / PM: Add function for device power state initialization
ACPI / PM: Introduce __acpi_bus_get_power()
ACPI / PM: Introduce function for refcounting device power resources
ACPI / PM: Add functions for manipulating lists of power resources
ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
ACPICA: Update version to 20101209
...
Use the new function acpi_bus_update_power(), which is safer than
acpi_bus_get_power(), for getting device power state in
acpi_fujitsu_add() and acpi_fujitsu_hotkey_add().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add new mappings for assist, VAIO, zoom and eject buttons present on
refurbished P, Z and EC models.
Reported-by: Gyorgy Jeney <nog.lkml@gmail.com>
Reported-by: Stephan Mueller <smueller@chronox.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Currently the x86 platform devices are not consistent about selecting
or depending on the LEDs Kconfig variables, and this inconsistency
leads to Kconfig getting upset and refusing to offer LEDs (even on
non-x86 platforms):
drivers/platform/x86/Kconfig:422:error: recursive dependency detected!
drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI
drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI
drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS
drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI
Fix this by always selecting rather than depending on the symbols as
slightly more drivers use this approach already and it seems more
user friendly.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix sparse warning for non-ANSI function declaration:
drivers/platform/x86/sony-laptop.c:1134:35: warning: non-ANSI function declaration of function 'sony_nc_rfkill_update'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix sparse warning for non-ANSI function declaration:
drivers/platform/x86/intel_ips.c:1477:25: warning: non-ANSI function declaration of function 'ips_link_to_i915_driver'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add the KHLB2 model identifier to the list of supported models
Signed-off-by: Albert Astals Cid <aacid@kde.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Enabled Acer Launch Manager mode to disable the EC raw behavior for
communication devices when WMID3 method available. And, we also add a
ec_raw_mode kernel module option for enable The EC raw behavior mode
when anyone what reset it back.
When Acer Launch Manager mode enabled, EC will stop to touch any
communication devices' RF state or power state that causes conflict
with rfkill_input or any userland daemon to charge the rfkill rules.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jiri Benc <jbenc@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding
"irq_eoi" for struct irq_chip, this patch will make it support both the new
and old interface.
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Hi,
In drivers/platform/x86/thinkpad_acpi.c::acpi_evalf() we don't always call
va_end() after va_start(). This patch corrects that.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Initial wlan/bluetooth/wwan rfkill software block state when acer-wmi driver
probe. Acer notebook can save the devices state and this patch can use it to
initial the devices' rfkill state.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Check the Acer OEM-specific Type AA to detect the WiFi/Bluetooth/3G
devices available or not, and set the devices capability flag.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jiri Benc <jbenc@suse.cz>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add 3G rfkill sysfs file for provide userland to control 3G device
on/off by using WMI method.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Jiri Benc <jbenc@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Carlos Corbaho <carlos@strangeworlds.co.uk>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
With 'make oldnoconfig' I see these warnings in linux-next (next-20101208):
drivers/platform/x86/Kconfig:422:error: recursive dependency detected!
drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI
drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI
drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS
drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI
This patch replaces all "select on ACPI_WMI" by "depends on ACPI_WMI".
Quote from David Woodhouse:
"A better policy is: "NEVER USE SELECT"."
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Passing ideapad_priv as argument and try not to using too much global variable.
This is part 2 for rfkill.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Passing ideapad_priv as argument and try not to using too much global variable.
This is part 1 for platform driver and input device.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
1. Add markups on init and exit functions
2. Unify the comments in the same style
3. Return result when module initial
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Hotkey enabled by this patch:
Fn+F3: Video mode switch
Fn+F5: software rfkill for wifi
For some ideapad when push Fn+F3, hardware generates Super-P keys, those key
will not be enabled by this patch.
Thanks for Dave Hansen report the problem. If CONFIG_INPUT_SPARSEKMAP is not
set, when building, you will have error message:
ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined!
To select INPUT_SPARSEKMAP solve this issue.
Ref: http://lkml.org/lkml/2010/12/2/340
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The entry was at /sys/devices/LNXSYSTM:00/../VPC2004:00/camera_power
move to /sys/devices/platform/ideapad/camera_power
Add document about usage of ideapad node in sysfs.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Create /sys/devices/platform/ideapad for nodes of ideapad landing.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Annotate pnp_ids as '__used' to fix following warning:
CC drivers/platform/x86/fujitsu-laptop.o
drivers/platform/x86/fujitsu-laptop.c:1243: warning: ‘pnp_ids’ defined but not used
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The break resets the retval to 0 but we want to return an error code.
This was introduced in c64eefd48c "WMI: embed struct device directly
into wmi_block"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
If legacy device (SB.ATKD - ASUS010) used by eeepc-laptop
is enabled, don't allow eeepc-wmi to load because:
- eeepc-laptop may be loaded, and can conflict with
eeepc-wmi (they both try to register eeepc::touchpad
led for example).
- the WMI interface is inteded to be used when the OS is
not detected as Win 7. And when this is the case, the
ASUS010 device is disabled.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Allow te get the current led state in a more accurate way.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Since eeepc-wmi has currently no official maintainer, I claim
maintainership of this driver, and add it to the acpi4asus project.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
eeepc-wmi/ - debugfs root directory
dev_id - current dev_id
ctrl_param - current ctrl_param
devs - call DEVS(dev_id, ctrl_param) and print result
dsts - call DSTS(dev_id) and print result
DEVS and DSTS are the main functions used in eeepc-wmi, this
will allow to test new features without patching the drivers.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
wimax support is missing because I don't have any DSDT
with WMI and wimax support.
Most of the code comes from eeepc-laptop.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The old code was using platform_driver.probe to initialize
eeepc_wmi context. That's a mistake because if probe fail,
eeepc_platform_register() won't tell anyone, and chaos will happen.
Wrap add and remove code inside eeepc_wmi_add() / eeepc_wmi_remove(),
and try to use the static platform_device only in eeepc_wmi_init()
and eeepc_wmi_exit()
The code is now very similar to eeepc-laptop, except eeepc_laptop_add
and eeepc_laptop_remove are called from acpi_driver, not module
init/exit functions, but WMI doesn't provide such functionalities (yet ?).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add missing input_sync call in cmpc_keys_handler function.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
We don't need to call bios/acpi (cmpc_set_rfkill_wlan) if the blocked
state is already set to the same value (little optimization). This can
happen for example if we initialize the module with same initial
hardware state (rfkill core always call cmpc_rfkill_block on
initialization here).
Also GWRI method only accepts 0 or 1 for setting rfkill block, as can be
seen on AML code from acpidump->DSDT from a classmate sample I have, so
should be fine setting state only to 0 or 1 directly.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
WMI data blocks can contain WMI events with the same GUID but with
different notifiy_ids, for example volume up/down hotkeys.
This patch enables a single event handler to be registered and
unregistered against all events with same GUID but different
notify_ids. Since an event handler is passed the notify_id of
an event it can can differentiate between the different events.
The patch also ensures we only register and unregister a device per
unique GUID.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This driver implements ioctl and interfaces with intel scu ipc driver. It
is used to access pmic/msic registers from user space and firmware update
utility.
Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
[Extensive clean up and debug]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, earlyprintk: Move mrst early console to platform/ and fix a typo
x86, apbt: Setup affinity for apb timers acting as per-cpu timer
ce4100: Add errata fixes for UART on CE4100
x86: platform: Move iris to x86/platform where it belongs
x86, mrst: Check platform_device_register() return code
x86/platform: Add Eurobraille/Iris power off support
x86, mrst: Add explanation for using 1960 as the year offset for vrtc
x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
x86: Ce4100: Add reboot_fixup() for CE4100
ce4100: Add PCI register emulation for CE4100
x86: Add CE4100 platform support
x86: mrst: Set vRTC's IRQ to level trigger type
x86: mrst: Add audio driver bindings
rtc: Add drivers/rtc/rtc-mrst.c
x86: mrst: Add vrtc driver which serves as a wall clock device
x86: mrst: Add Moorestown specific reboot/shutdown support
x86: mrst: Parse SFI timer table for all timer configs
x86/mrst: Add SFI platform device parsing code
The IPS driver is designed to be able to run detached from i915 and
just not enable GPU turbo in that case, in order to avoid module
dependencies between the two drivers. This means that we don't know
what the load order between the two is going to be, and we had
previously only supported IPS after (optionally) i915, but not i915
after IPS. If the wrong order was chosen, you'd get no GPU turbo, and
something like half the possible graphics performance.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
While looking for the duplicates in /sys/class/wmi/, I couldn't find
them. The code that looks for duplicates uses strncmp in a binary GUID,
which may contain zero bytes. The right function is memcmp, which is
also used in another section of wmi code.
It was finding 49142400-C6A3-40FA-BADB-8A2652834100 as a duplicate of
39142400-C6A3-40FA-BADB-8A2652834100. Since the first byte is the fourth
printed, they were found as equal by strncmp.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
I didn't know the difference between the two when I wrote this code in
commit c30116c6f0.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add new MUTE key seen on Medion Akoya AIO PC P4010D using MSI motherboard
(Product Name: MS-7621)
Reported-and-tested-by: Mark Huijgen <mark.sf.net@huijgen.tk>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Asus UL30A has a 3G chip, but the radio is disabled by default.
The DSDT also reference a WIMAX device, which is not present on this model.
This patch adds two new files: wwan and wimax to control WWAN and
WIMAX devices. It does not use rfkill, because like WLED and BLED,
we don't know yet that the two ACPI functions will always control the
radio, they may control only the leds on some hardware.
We may add rfkill switchs later.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This fixes the following:
CC [M] drivers/platform/x86/eeepc-wmi.o
drivers/platform/x86/eeepc-wmi.c:322: warning: initialization from incompatible pointer type
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Some of the IBM servers that are supported by ibm_rtl
can run in both Legacy mode (BIOS) and in UEFI mode.
When running in UEFI mode, it is possible that the
EBDA table exists but cannot be mapped and reports
errors. We need to make sure that by default we don't
try to probe the machines if they are running in UEFI
mode.
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Allow all IBM machines to pass the DMI check so that we
don't have to add them one by one to the driver. Any IBM
machine that has the _RTL_ table in the EBDA will work.
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Delete successive assignments to the same location.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression i;
@@
*i = ...;
i = ...;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
A lone FN key press on a Toshiba Portégé R700 without another key in
conjunction results in an ACPI event and a spurious error message on
the console.
Add a key entry to map this event to a KEY_FN keypress. This prevents
the console message.
Signed-off-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix printk format warning:
drivers/platform/x86/ibm_rtl.c:305:warning: format '%#llx' expects type 'long long unsigned int', but argument 2 has type 'phys_addr_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Vernon Mauery <vernux@us.ibm.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
backlight_device_register has been expecting a const "ops" argument, and using
it as such, since 9905a43b2d. Let's make the
remaining backlight_ops instances const.
Inspired by hunks of the grsecurity patch, updated for newer kernels.
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
SFI provides a series of tables. These describe the platform devices present
including SPI and I²C devices, as well as various sensors, keypads and other
glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c)
This patch is a merge of the core elements and relevant fixes from the
Intel development code by Feng, Alek, myself into a single coherent patch
for upstream submission.
It provides the needed infrastructure to register I2C, SPI and platform devices
described by the tables, as well as handlers for some of the hardware already
supported in kernel. The 0.8 firmware also provides GPIO tables.
Devices are created at boot time or if they are SCU dependant at the point an
SCU is discovered. The existing Linux device mechanisms will then handle the
device binding. At an abstract level this is an SFI to Linux device translator.
Device/platform specific setup/glue is in this file. This is done so that the
drivers for the generic I²C and SPI bus devices remain cross platform as they
should.
(Updated from RFC version to correct the emc1403 name used by the firmware
and a wrongly used #define)
Signed-off-by: Alek Du <alek.du@linux.intel.com>
LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain>
[Clean ups, removal of 0.7 support]
Signed-off-by: Feng Tang <feng.tang@linux.intel.com>
[Clean ups]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (44 commits)
eeepc-wmi: Add cpufv sysfs interface
eeepc-wmi: add additional hotkeys
panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata
panasonic-laptop: Handle errors properly if they happen
intel_pmic_gpio: fix off-by-one value range checking
IBM Real-Time "SMI Free" mode driver -v7
Add OLPC XO-1 rfkill driver
Move hdaps driver to platform/x86
ideapad-laptop: Fix Makefile
intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register
ideapad: Add param: no_bt_rfkill
ideapad: Change the driver name to ideapad-laptop
ideapad: rewrite the sw rfkill set
ideapad: rewrite the hw rfkill notify
ideapad: use EC command to control camera
ideapad: use return value of _CFG to tell if device exist or not
ideapad: make sure we bind on the correct device
ideapad: check VPC bit before sync rfkill hw status
ideapad: add ACPI helpers
dell-laptop: Add debugfs support
...
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
eeepc-laptop provides a sysfs interface to read and control what it
calls cpufv. When WMI is enabled, the ACPI interface changes slightly
and becames a write-only control with 3 valid values.
Expose cpufv again to allow for user space utils that can extended battery
life noticably and come a little closer to parity with eeepc-laptop.
Write-only is OK for most user space apps because read status was
mostly used to prevent unneeded mode changes. Since this same check
to ignore changes to same mode also exists in the DSDT then it was
wasted ACPI call.
acpi_osi="!Windows 2009" can be used for get back eeepc-laptop's
read support of cpufv for debugging things such as behaviour
during resume.
This patch was tested with EEE PC 1005PE by monitoring powertop output while
writing values of "0", "1", and "2" and by reviewing the decompiled DSDT of
an 1201NL and comparing it to 1005PE's DSDT.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Added 4 hotkeys using same keymap values as eeepc-latop.
These are mousepad toggle, resolution change, screen off,
and task manager. These were tested on 1005PE and are the
Fn-F3, F4, F7, and F9, respectively.
Also, added a new hot key for power toggles (Fn-Space on 1005PE)
and is meant to drive cpufv interface from userspace.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Function acpi_pcc_retrieve_biosdata is always called with parameters
(pcc, pcc->sinf), so we can drop the second parameter. It was
dangerous to pass the sinf array separately anyway, as its length is
checked as pcc->num_sifr, which pretty much assumed it was pcc->sinf
(or at least had the same size.)
This change makes the code slightly more compact and thus marginally
faster.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
acpi_pcc_retrieve_biosdata() returns success instead of error if
HKEY.SINF is invalid. Fix this.
Furthermore, if acpi_pcc_retrieve_biosdata() returns an error
during device addition, initialization is properly reverted but value
0 is returned, which means success. This would cause a crash when
later using or removing the device, so fix this too.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In pmic_irq_type(), we use gpio as array index for trigger,
thus the valid value range for gpio should be 0 .. NUM_GPIO - 1.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
After a period of RFC for this driver, I think it is ready
for inclusion in the platform-driver-x86 tree, hopefully to
be staged in the next merge window into Linus's tree.
--Vernon
------------------------------------------------------------
IBM Real-Time "SMI Free" mode driver
This driver supports the Real-Time Linux (RTL) BIOS feature.
The RTL feature allows non-fatal System Management Interrupts
(SMIs) to be disabled on supported IBM platforms and is
intended to be coupled with a user-space daemon to monitor
the hardware in a way that can be prioritized and scheduled
to better suit the requirements for the system.
The Device is presented as a special "_RTL_" table to the OS
in the Extended BIOS Data Area. There is a simple protocol
for entering and exiting the mode at runtime. This driver
creates a simple sysfs interface to allow a simple entry and
exit from RTL mode in the UFI/BIOS.
Since the driver is specific to IBM SystemX hardware (x86-
based servers) it only builds on x86 builds. To reduce the
risk of loading on the wrong hardware, the module uses DMI
information and checks a list of servers that are known to
work.
Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add a software rfkill switch for the WLAN interface in the OLPC XO-1
laptop. It uses the OLPC embedded controller to cut/restore power to
the Marvell WLAN chip on the motherboard.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The hdaps driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/platform/x86 seems much more
appropriate, as the driver is only useful on x86 laptops.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Frank Seidel <frank@f-seidel.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The intel_scu_ipc_update_register 2nd paramter should the bits and 3rd
paramter should be the mask.
This typo was introduced during IPC function changing...
Reported-by: Ryan Zhou <ryan.zhou@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add new module parameter that force module not to register bluetooth rfkill.
There is report that saying using this bluetooth rfkill to enable/disable
bluetooth will let bluetooth device initial failed when enable on Lenovo
ideapad S12. Fortunately there is another rfkill registered by bluetooth
driver for S12 and user can shutdown the bluetooth by either bluetooth driver
or HW RF switch.
For dual OS user, it may have some trouble that using Linux after turning off
bluetooth with another OS if we do not register bluetooth rfkill at all. So
we will force bluetooth enable when no_bt_rfkill=1.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Tested-by: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Since the platform drivers doing more for laptops than just using specific
ACPI device. It will be good to change the name from *_acpi to *-laptop.
Reference: http://lkml.org/lkml/2010/8/14/154
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
1. Read hw rfkill status by ec command
2. Not to touch sw status of each rfkill when hw rfkill notify
3. Initial rfkill status when module loaded
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There are several bits of the return value of _CFG shows if RF/Camera devices
exist or not.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
By reading from method _CFG to make sure we bind on the correct VPC2004 device.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There are two methods under VPC2004 which is used to access VDAT/VCMD of EC
register. Add helpers for read and write these two registers.
And add read_method_int for reading the return value from ACPI methods which
requires no parameter.
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Export the status of RF killswitch through debugfs.
The killswitch status is obtained by the SMI to BIOS. Exporting this status
through debugfs can help identify the issue with the misbehaving firmware.
Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of creating wmi_blocks and then register corresponding devices
on a separate pass do it all in one shot, since lifetime rules for both
objects are the same. This also takes care of leaking devices when
device_create fails for one of them.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of adding modalias attribute manually set it up as class's
device attribute so driver core will create and remove it for us.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Do not abuse wmi_block structure to hold the head of list
of blocks, use separate list_head for that.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There is no reason why we allocate memory and copy data into an
intermediate buffer, it is not like we are working with data coming
from userspace.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
If we _WDG returned object that is not buffer we were forgetting
to free memory allocated for that object.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Driver initialization was forgetting to remove EC address space handler
in cases when parse_wdg() method failed.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of registering (and removing) every attribute individually
switch to using sysfs attribute group. This makes sure that we
properly unwind and do not try to remove non-existent attributes which
may not be safe to do in the future.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We need to include the SFI headers. This is fine as the SCU is only
relevant to x86 platforms with SFI.
Fixes the -next warning report.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In 2.6.35 the hex_to_bin() was introduced.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix kconfig recursive dependency error in ACPI_TOSHIBA:
it uses both select and depends on for BACKLIGHT_CLASS_DEVICE.
drivers/video/backlight/Kconfig:117:error: recursive dependency detected!
drivers/video/backlight/Kconfig:117: symbol BACKLIGHT_CLASS_DEVICE is selected by ACPI_TOSHIBA
drivers/platform/x86/Kconfig:490: symbol ACPI_TOSHIBA depends on LEDS_CLASS
drivers/leds/Kconfig:12: symbol LEDS_CLASS is selected by BACKLIGHT_ADP8860
drivers/video/backlight/Kconfig:285: symbol BACKLIGHT_ADP8860 depends on BACKLIGHT_CLASS_DEVICE
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The driver uses sparse keymap library and does not use this field
anymore.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The GPS rfkill crappy code. The ops_data argument wasn't
set, and was totally misused. The fix have been tested
on an Asus R2H.
Cc: stable@kernel.org
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Makes asus-laptop and eeepc-laptop _init/_exit functions
looks exactly the same as they do the same thing.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of implementing its own version of keymap hanlding switch over
to using sparse keymap library.
Also, install notify handler only after we allocated input device,
otherwise we may risk getting event too early and crash. Similarly,
notify handler should be removed before we unregister input device.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of implementing its own version of keymap hanlding switch over
to using sparse keymap library.
Also make sure that we install notify handler only after we allocated
input device and that we remove notify handler before unregistering
input device.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of implementing its own version of keymap hanlding switch over to
using sparse keymap library.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
nstead of implementing its own version of keymap hanlding switch over to
using sparse keymap library.
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Instead of implementing its own version of keymap hanlding switch over to
using sparse keymap library.
Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
The undocumented interface we're using for reading CPU power seems to be
overreporting power. Until we figure out how to correct it, disable CPU
turbo and power reporting to be safe. This will keep the CPU within default
limits and still allow us to increase GPU frequency as needed.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The BIOS may hand us a lower CPU power limit than the default for a
given SKU. We should use it in case the platform isn't designed to
dissapate the full TDP of a given part.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Both when polling the current turbo status (in poll_turbo_status mode)
and when handling thermal events (in ips_irq_handler) the current status
of GPU turbo is updated to match the hardware status. However if during
driver initialisation we were unable aquire linkage to the i915 driver
enabling GPU turbo will lead to an oops on the first attempt to determine
GPU busy status.
Ensure that we do not enable GPU turbo unless we have driver linkage.
BugLink: http://bugs.launchpad.net/bugs/632430
Cc: stable@kernel.org
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Print some interesting values when MCP limits
are exceeded.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
They're optional. If not present or sane, we should use the CPU
defaults.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
If the CPU doesn't support turbo, don't try to enable/disable it.
http://bugzilla.kernel.org/show_bug.cgi?id=18742
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The patch is to create ips_adjust thread before ips_monitor begins
to run because the latter will kthread_stop() or wake up the former
via ips->adjust pointer. Without this change, it is possible that
ips->adjust is NULL when kthread_stop() or wake_up_process() is
called in ips_monitor().
Signed-off-by: minskey guo <chaohong.guo@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In ips_get_i915_syms(), the symbol i915_gpu_busy() is not released
when error occurs.
Signed-off-by: minskey guo <chaohong.guo@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The variable old_cpu_power is used to save the value of THM_CEC
register. In get_cpu_power(), it will be divided by 65535.
Signed-off-by: minskey guo <chaohong.guo@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The mask of sequence number in THM_ITV register is 16bit width instead
of 8bit.
Signed-off-by: minskey guo <chaohong.guo@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Change the code so that it will use the correct size for keymap entries.
Do it in a way that makes it harder to screw it up in the future.
Reported-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We should pass the data to the data register.
Signed-off-by: Jianwei Yang <jianwei.yang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like there is an off-by-one error in one of your changes to
drivers/staging/rar_register/rar_register.c:
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The machines I have appear to provide their return value in the arguments
structure, not the output structure. Rework the driver to use that again
in order to get rfkill working again.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Don't ask how ACPI_TOSHIBA got enabled on in desktop system's .config -
I don't know. But it has silently been there until I tried 2.6.36-rc2,
where it broke the build because I don't have LED support turned on.
Attached patch fixes things up.
(I had to change BACKLIGHT_CLASS_DEVICE to "depends" because otherwise
I get unsightly core dumps out of scripts/kconfig/conf).
jon
--
toshiba: make sure we pull in LED support
The Toshiba extras driver uses the LED module, so make sure we have it
configure in.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Like others in the Mini series, the Dell Mini 1012 does not support
the smbios hook required by dell-laptop.
Signed-off-by: Victor van den Elzen <victor.vde@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
On the T410s and most likely other current models, Fn-F6 is labeled as
Camera/Headphone key. Report key presses as KEY_CAMERA.
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Acked-by: Jerone Young <jerone.young@canonical.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use the quirks engine to select model-specific keymaps, which makes
it much easier to extend should we need it.
Keycodes are based on the tables at
http://www.thinkwiki.org/wiki/Default_meanings_of_special_keys.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Use a safer coding style for the hotkey keymap. This does not fix any
problems, as the current code is correct. But it might help avoid
mistakes in the future.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
acpi_video_backlight_support() already tells us if ACPI is handling
backlight control through the generic ACPI handle. It is better to just
trust it.
While at it, adjust down a printk priority, and test earlier for
brightness_enable=0.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The Linux ACPI core locates the ACPI video devices for us and marks them
with ACPI_VIDEO_HID. Use that information to locate the video device
instead of a half-baked hunt for _BCL.
This uncouples the detection of the number of backlight brightness
levels on ThinkPads from the ACPI paths in vid_handle.
With this change, the driver should be able to always detect whether the
ThinkPad uses a 8-level or 16-level brightness scale even on newer
models for which the vid_handle paths have not been updated yet.
It will skip deactivated devices in the ACPI device tree, which is a
change in behaviour.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
There is a potential NULL dereference of "limits." We can just return
NULL earlier to avoid it. The caller already handles NULL returns.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The assignment of ret to -EIO appears to only make sense if the branch that
it is aligned with is executed, so move it into that branch.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@
(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
if (p1[0].column == p2[0].column):
cocci.print_main("branch",p1)
cocci.print_secs("after",p2)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
IRQ and resource[] may not have correct values until
after PCI hotplug setup occurs at pci_enable_device() time.
The semantic match that finds this problem is as follows:
// <smpl>
@@
identifier x;
identifier request ~= "pci_request.*|pci_resource.*";
@@
(
* x->irq
|
* x->resource
|
* request(x, ...)
)
...
*pci_enable_device(x)
// </smpl>
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We don't need a dev_warn when we exceed a thermal or power limit as
we'll handle it appropriately by clamping down on the CPU, GPU or both
as needed.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Size for PMIC read/write command is byte, while it is DWORD for other
IPC commands.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: ALan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Data is 2-byte per entry for PMIC read-modify-update command.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Don't pass more bytes in the command length field than we filled.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
some messages take 4 bytes, but only fill 3 bytes....
this patch makes sure that whatever we send to the SCU is zeroed first
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The stack buffer for IPC messages was 16 bytes, limiting messages to a
size of 4 (each message is 32 bit).
However, the touch screen driver is trying to send messages of size 5....
(AC: Set to 20 bytes having checked the max size allowed)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This provides an architecture level board identify function to replace the
cpuid direct usage
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The firmware of production devices does not support this interface so this
is dead code.
Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Changes to work on bothMmoorestown and Medfield
New pci id added for Medfield
Return type of ipc_data_readl chnaged from u8 to u32
Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Intel SCU message formats depend upon the processor type. Replace the
module option with automatic detection of the processor type.
Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
My .config contains ACER_WMI=m. On SPARC. That does not make sense.
Restrict the x86 platform driver menu to x86.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Make dell_laptop_i8042_filter() static as it's used only in dell-laptop.c
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch includes below fixes:
1. return -ENOMEM instead of 0 if input_allocate_device fail.
2. fix wrong goto if sparse_keymap_setup fail.
3. fix wrong goto if input_register_device fail.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
backlight is needlessly defined global.
This patch makes the symbol static.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add support for Toshiba Illumination. This is a set of LEDs installed on
some Toshiba laptops. It is controlled through ACPI, the commands has been
found through reverse engineering. It has been tested on a Toshiba Qosmio
G50-122.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Moorestown has PMIC chip which contains GPIO blocks. The PMIC chip is
connected to Langwell by SPI interface. So this GPIO driver will be regarded
as SPI GPIO expander though the actual GPIO access is through IPC and SRAM.
The SPI master contoller will probe this device driver by parsing SPIB table.
Cleaned up for new IPC, GPE removed and some printk and other tidying by
Alan Cox. Fixes for points noted by Matthew Garrett
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In current implementation, acpi_pcc_write_sset return 1
if write is successful, 0 if write is failed.
But all the callers consider acpi_pcc_write_sset return 0
if write is successful and return negtive if write is failed.
This patch changes the implementation of acpi_pcc_write_sset to
return 0 if write is successful, -EIO if write is failed.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The hotplug_disabled module parameter is determinated at the module load
time. Change the value after the module is loaded does not make sense and
has no effect at all, thus set the permissions to 0444 instead of 0644.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The wapf module parameters defines the behavior of the Fn+Fx wlan key.
The wlan_status and bluetooth_status module parameters are for setting the
wlan/bluetooth status on boot.
All above module parameters are determinated only at the module load time.
Change the value after the module is loaded does not make sense and has
no effect at all, thus set the permissions to 0444 instead of 0644.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Remove non-used acer_quirks struct definition.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller
must kfree the returned buffer if AE_OK is returned.
Call Trace:
wmab_execute
-> wmi_evaluate_method
-> acpi_evaluate_object
Thus if callers of wmab_execute() pass ACPI_ALLOCATE_BUFFER, the return
buffer must be kfreed if wmab_execute return AE_OK.
[akpm@linux-foundation.org: avoid multiple return points, remove unneeded cast, remove unneeded initialisation of `status']
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller
must kfree the returned buffer if AE_OK is returned.
The callers of wmi_query_block() pass ACPI_ALLOCATE_BUFFER, and thus must
check its return value before accessing or kfree() on the buffer.
This patch adds a missing kfree(out.pointer) before exit
WMID_set_capabilities() and get_wmid_devices().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
To improve readability rename add_device() to
create_toshiba_proc_entries() and rename remove_device() to
remove_toshiba_proc_entries().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Márton Németh <nm127@freemail.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add error checking and return -ENOMEM if input_allocate_device() fail.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
remove_device() and add_device() are not related to ACPI APIs, it does not
make sense to return acpi_status for both functions.
Current implementation of add_device() always AE_OK, thus the return value
checking for add_device() always return false for ACPI_FAILURE(status).
This patch makes add_device() to be void and remove the unnecessary return
value checking.
remove_proc_entry() won't fail, thus change remove_device() to be void.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Márton Németh <nm127@freemail.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fix resource reclaim in below cases:
1. acerhdf_register_platform() does not properly handle
platform_device_alloc() failure and platform_device_add() failure This
patch adds error handing for acerhdf_register_platform().
2. acerhdf_register_platform() return err with acerhdf_dev == NULL.
as a result, acerhdf_unregister_platform() does not do resource reclaim
in acerhdf_init() error path. This patch adds error handing for
acerhdf_register_platform(), thus correct the error handing path in
acerhdf_init(). goto out_err instead of err_unreg if
acerhdf_register_platform() fail.
3. platform_device_del() should only used in error handling. Current
implementation missed a platform_device_put() in acerhdf_exit. This
patch fixes it by using platform_device_unregister() instead of
platform_device_del() in acerhdf_unregister_platform.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Peter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In current implementation, store_ledd() does not return error if
write_acpi_int fail. This patch fixes it by return -ENODEV if
write_acpi_int fail.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
According to the comments of write_acpi_int_ret(), write_acpi_int_ret()
should return 0 if write is successful, -1 else. Thus if handle is NULL,
the write does not happen, it should return -1.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
rfkill uses a const struct rfkill_ops pointer.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The following symbols are needlessly defined global:
logolamp_led
kblamps_led
This patch makes the symbols static.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
cmpc_accel_sensitivity_attr is needlessly defined global.
This patch makes the symbol static.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: Daniel Oliveira Nascimento <don@syst.com.br>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The following symbols are needlessly defined global:
thz_dev
cl_dev
acerhdf_dev
acerhdf_dev_ops
acerhdf_cooling_ops
This patch makes the symbols static.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Peter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In the case of no match ( hotk->model == END_MODEL ), the only posible
case to return 0 is to have a Samsung P30 detected. This patch improves
readability by moving related code after if/else clause to be inside if
clause.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
In the case of no match ( hotk->model == END_MODEL ), model sholud be
kfreed before return AE_OK.
This patch includes below fixes:
1. adds a missing kfree(model) before return AE_OK.
2. asus_hotk_get_info should return int, thus return 0 instead of AE_OK.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
dmi_check_system() walks the table running matching functions until
someone returns non zero or we hit the end.
This patch makes dmi_check_cb to return 1 so dmi_check_system() return
immediately when a match is found.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Cc: Matthew Garrett <mjg@redhat.com>a
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The driver now supports the Compal JHL90 (which I use) and it has some
added features. The biggest novelties are a battery interface
(power_supply) and a temperature and fan control interface (hmwon). It
also adds a power-off feature to the backlight subsystem and it exports a
few files that can enable/disable wake_on_XXX events.
Much of the original code of the old features is still there, but I've
changed some names to keep the naming more coherent with the added
functionalities. (Sorry for the huge patch)
Some technical stuff about the new driver:
First of all, I'm not sure if the extra features also work on the other
Compal boards. Currently they only get enabled if the DMI data indicates
you are on a JHL90 board.
Secondly, I've noticed a quirk in my fan controller. I have to re-send
the wanted pwm-level to the controller every so often. If I don't do
this, the fanspeed will slowly rise until after a couple of minutes it's
at full speed. (Note that every normal userland application will probably
update the pwm-level every so often anyway, based on temperature readings,
so this might not be an issue in practice) If this turns out to be a
problem with all the controllers, maybe we should implement a kernel timer
and have the driver re-send the pwm level every XX seconds to make this
transparent to userspace? (However, I couldn't immediately find a way to
do this cleanly.)
Additional information can be found in the source comments.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: add missing semicolon]
Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
compal-laptop uses hwmon interfaces, so it should depend on HWMON.
compal-laptop.c:(.devinit.text+0x4071f): undefined reference to `hwmon_device_register'
compal-laptop.c:(.devexit.text+0x6ec0): undefined reference to `hwmon_device_unregister'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roald Frederickx <roald.frederickx@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
input_free_device() should only be used if input_register_device() was not
called yet or if it failed. This patch removes unnecessary
input_free_device calls.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Matthew Garrett <mjg@redhat.com>a
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Driver didn't verify the pointers in which it got product information back
from DMI; on QEMU one of the pointers came back null, which made the
driver crash and subsequently caused a kernel panic.
Signed-off-by: Rahul Chaturvedi <rkc@chromium.org>
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Remove "chk_off" as it was only needed for T31 netbooks. But those
netbooks can also be handled just with "cmd_off" register (0x9e) for
reading the state back.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Add new BIOS versions for Acer 1410 and 1810xx and Packard Bell netbooks.
Fixed registers of Acer AOA150 BIOS version v0.3114: Old registers caused
Fan to spin up at every temperature check.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Thomas Bächler reports that his machine generates two keycodes for zooming
in and out. Add these to the default keymap.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Thomas Bächler <thomas@archlinux.org>
platform_device_unregister calls platform_device_del and platform_device_put,
thus this change is logically equivalent to original code.
I made this change because the documents in platform.c shows that:
platform_device_del and platform_device_put must _only_ be externally called
in error cases. All other usage is a bug.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
If dell_new_hk_type is true, dell_legacy_wmi_keymap will point to a memory
allocated in setup_new_hk_map().
In this case, the memory is not freed in current implementation.
This patch fixes the leak by kfree(dell_wmi_keymap) if dell_new_hk_type is true.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
dmi_check_system() walks the table running matching functions until someone
returns non zero or we hit the end.
This patch makes dmi_matched to return 1 so dmi_check_system() return
immediately when a match is found.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The interface file is not writable, thus set permissions to S_IRUGO.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The callers of write_acpi_int_ret() pass ACPI_ALLOCATE_BUFFER,
the caller must kfree the returned buffer if AE_OK is returned.
This patch adds a missing kfree(buffer.pointer) before return -ENOMEM
if kstrdup fail.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER,
the caller must kfree the returned buffer if AE_OK is returned.
The callers of wmi_get_event_data() pass ACPI_ALLOCATE_BUFFER,
and thus must check its return value before accessing
or kfree() on the buffer.
This patch adds return value checking for wmi_get_event_data()
and adds a missing kfree(obj) in the end of wmi_notify_debug
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Fixes pressing the eject key on Dell Studio 1555 does not work and produces
message :
dell-wmi: Unknown key 0 pressed
Signed-off-by: Islam Amer <pharon@gmail.com>
platform_device_unregister will also call platform_device_put() to drop reference count.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch properly kfree out.pointer and gblock in error path.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This patch fixes the resource reclaim in acer_wmi_init error path.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Stanse found that there are two NULL checks missing in ips_monitor. So
check their value too and bail out appropriately if the allocation
failed.
While at it, add one more kfree to the fail path. It is not necessary
now, but may be needed in the future when a new allocation is added.
And for completeness.
Also remove unneeded initialization of the variables. They are all set
right after their declaration.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Current implementation in hp_wmi_init does not check any error and always
return success.
This patch properly handles recource reclaim and return err in error path.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
rfkill_alloc returns NULL when it fails if RFKILL is enabled. When RFKILL is
disabled, its return value of ERR_PTR(-ENODEV) is OK to use as all rfkill
functions will work with it, as they are simply empty stubs.
Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: platform-driver-x86@vger.kernel.org
Cc: mjg@redhat.com
Cc: don@syst.com.br
Cc: rpurdie@rpsys.net
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Be sure to enable GPU turbo by default at load time and check GPU busy
and MCP exceeded status correctly. Also fix up CPU power comparison and
work around buggy MCH temp reporting.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Intel Core i3/5 platforms with integrated graphics support both CPU and
GPU turbo mode. CPU turbo mode is opportunistic: the CPU will use any
available power to increase core frequencies if thermal headroom is
available. The GPU side is more manual however; the graphics driver
must monitor GPU power and temperature and coordinate with a core
thermal driver to take advantage of available thermal and power headroom
in the package.
The intelligent power sharing (IPS) driver is intended to coordinate
this activity by monitoring MCP (multi-chip package) temperature and
power, allowing the CPU and/or GPU to increase their power consumption,
and thus performance, when possible. The goal is to maximize
performance within a given platform's TDP (thermal design point).
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
msi-laptop uses i8042_*() interfaces, so it should depend on
SERIO_I8042. E.g., when SERIO_I8042=m and MSI_LAPTOP=y:
msi-laptop.c:(.text+0x18a7fe): undefined reference to `i8042_install_filter'
msi-laptop.c:(.init.text+0xd69d): undefined reference to `i8042_remove_filter'
msi-laptop.c:(.exit.text+0x19c3): undefined reference to `i8042_remove_filter'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Randy Dunlap has reported that building classmate-laptop fails when
CONFIG_RFKILL=m and CONFIG_ACPI_CMPC=y. He suggested depending on
RFKILL, but, then, it will not be possible to select classmate-laptop
when RFKILL is off. There's no known problem with building and using
classmate-laptop with RFKILL off. So depend on RFKILL or RFKILL=n.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Daniel Oliveira Nascimento <don@syst.com.br>
Give different error messages if device_enum is NULL or if its type field
has the wrong value.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
expression E,E1;
identifier f;
statement S1,S2,S3;
@@
if ((E == NULL && ...) || ...)
{
... when != if (...) S1 else S2
when != E = E1
* E->f
... when any
return ...;
}
else S3
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
- Improve error handling, by explictly return zero for success, error otherwise
- WMI query command can have arbitrary input sized params
- WMI query command can have specific output sized params (0, 4, 128,..) byte
I like to go on here, but this is a rather intrusive change that should
be looked at first. I am sure the one or other thing can be done better or
there might be typo/bug somewhere.
This did not get any testing yet, only compile tested.
Next steps could be:
- Eventually introduce hp_wmi_perform_{read,write}_query macros
- Introduce new wireless query interface (0x1B)
- more
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
CC: linux-acpi@vger.kernel.org
CC: platform-driver-x86@vger.kernel.org
Depending on ACPI version (1.0 -> 32 bit) an integer could be
32 or 64 bit long. _WED internal concatenates two integers and
the return value will be 8 byte (2* 32 bit) or 16 byte (2* 64 bit)
long, depending on the ACPI version.
Also the data send with the WMI event is defined to be splitted into:
- Event ID -> 4 bytes
- Event Data -> 4 bytes
This gets messed up with new ACPI versions.
But it's a HP BIOS bug that may get fixed in the future
-> Support both, 16 and 8 byte _WED buffers.
Also the wrong assumption that from the event data sent, only the
first byte is relevant got cleaned up that it fits event_id/event_data
as described above.
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: robert.moore@intel.com
Signed-off-by: Matthew Garrett <mjg@redhat.com>
CC: platform-driver-x86@vger.kernel.org
CC: linux-acpi@vger.kernel.org
Event id 0x4 defines the hotkey event.
No need (or even wrong) to query HPWMI_HOTKEY_QUERY if event id is != 0x4.
Reorder the eventcode conditionals and use switch case instead of if/else.
Use an enum for the event ids cases.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
CC: linux-acpi@vger.kernel.org
CC: platform-driver-x86@vger.kernel.org
This patch includes below fixes in error path:
1. fix a memory leak if device_create_file failed in
intel_menlow_add_one_attribute
2. properly free added attributes before return error in
intel_menlow_register_sensor error handler
3. properly call acpi_bus_unregister_driver before return error in
intel_menlow_module_init
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
- fix reversing of command/sub arguments
- fix a crash if the i2c interface is called before the device is found
Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commands with data must set the length in the message.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Found the N014, N051 and CR620 are must the same with N034 there are
load scm serial model. So, this patch move N014, N051 and CR620 dmi
information to right dmi table: msi_load_scm_models_dmi_table[]
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
drivers/platform/x86/eeepc-wmi.c: In function ‘eeepc_wmi_notify’:
drivers/platform/x86/eeepc-wmi.c:209: warning: ‘new’ may be used uninitialized in this function
drivers/platform/x86/eeepc-wmi.c:209: note: ‘new’ was declared here
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Yong Wang <yong.y.wang@intel.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Tejun Heo <tj@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Acked-By: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
To give people easily an idea what could be WMI driven on their system.
Introduces:
wmi.debug=[01]
Tested on an acer:
ACPI: WMI: DEBUG Event INTEGER_TYPE - 65535
Situation where a driver registers for specific event and debug
handler gets overridden and set again if the registering driver gets
unloaded again is untested, but should work.
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: platform-driver-x86@vger.kernel.org
CC: mjg59@srcf.ucam.org
CC: corentin.chary@gmail.com
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Clean up i8042 filter, rfkill and cancel delayed work when msi-laptop driver initial fail or exit on MSI scm model.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
There have some MSI netbook change devices state by EC when user press
wlan/bluetooth/wwan function keys. So, add a i8042 filter to sync sw
state with BIOS when function keys pressed.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Setup Wlan/Bluetooth/3G rfkill initial state to sync with the hardware
state from EC 0x2e address.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup when some other buffer is immediately copied into the
allocated region.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Use kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
eeepc-wmi uses backlight*() interfaces so it should depend on
BACKLIGHT_CLASS_DEVICE.
eeepc-wmi.c:(.text+0x2d7f54): undefined reference to `backlight_force_update'
eeepc-wmi.c:(.text+0x2d8012): undefined reference to `backlight_device_register'
eeepc-wmi.c:(.devinit.text+0x1c31c): undefined reference to `backlight_device_unregister'
eeepc-wmi.c:(.devexit.text+0x2f8b): undefined reference to `backlight_device_unregister'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: stable@kernel.org
The IPC (inter processor communications) is used to provide the
communications between kernel and system control units on some embedded
Intel x86 platforms.
(Various bits of clean up and restructuring by Alan Cox)
Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
The RFKILL device shares the same ACPI device used for backlight. So, it
required a new struct sharing both a backlight_device and a rfkill
device.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Document this, it is no fun to try to second guess why this sort of
stuff is in place years after it was added...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
1. Remove <handle>_path, as its only user was already removed in
a previous commit
2. Move all handle initialization, as well as <handle>_parent and
<handle>_paths to __init.* sections. This reduces the driver's
runtime footprint nicely.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Don't depend on the contents of led_path to know which LED interface
the firmware wants.
This removes the only user of *_path for the thinkpad-acpi ACPI
handlers, which will simplify future code.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Log more human-friendly errors instead of numeric values when
setup_acpi_notify() fails to install a notification handler.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Use acpi_format_exception() in acpi_evalf() instead of logging numeric
errors.
Also, when ACPICA returns an error, we should not be touching the return
object, as it is invalid. In debug mode, acpi_evalf() callers would
printk the returned crap (but fortunately, not use it).
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Use the EC HID (PNP0C09) to locate its main node, instead of a static
list.
Suggested-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg@redhat.com>
Extract the backlight level range size detection from the brightness
subdriver, and allow the other subdrivers access to that information.
This also allows us to relocate some code to a more convenient place.
The moved code was largerly unmodified, except for the return type of
tpacpi_check_std_acpi_brightness_support(), which now is correctly
marked as returning "unsigned int", and and two cosmetic fixes to make
checkpatch.pl happy.
Fixes for the NVRAM polling mode for the brightness hotkeys will need
this.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Move the driver initial greetings out of the first subdriver, as we do a
lot of other initialization before that point, and the initial greetings
should go as soon as the driver decides that it should load.
These greetings are not cosmetic, they make my life easier when users
report bugs.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
The hotkey polling code is supposed to generate hotkey messages as
close to the way the IBM event-based volume hotkey firmware does as
possible, i.e:
* Pressing MUTE issues a mute hotkey event, even if already mute;
* Pressing Volume up/down issues a volume up/down hotkey event,
even if already at maximum or minumum volume;
* The act of unmuting issues a volume up/down event, depending on
which hotkey was used to unmute.
Fix the code to do just that (mute handling was incorrect), and handle
multiple hotkey presses between two polling cycles.
The new code uses the volume_toggle bit in NVRAM only to detect
repeated presses of the mute key and multiple presses of the volume
keys trying to go past the end of the volume scale. This will work
around a bug in recent Lenovo firmware (e.g. T400), which causes the
firmware to not update the volume_toggle bit in certain situations.
Reported-by: Yang Zhe <yangzhe1990@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
The X100e needs some quick fixes to work semi-right with this driver.
There are much better ways to do this, but we can start with a quick
update and do it properly later.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Lenovo is playing around with its ACPI BIOS, and will end up reusing
method names. Their memory is not nearly as long as thinkpad-acpi's...
Secure most of the old IBM codepaths against running in a non-IBM box.
This would happen on the Lenovo X100e in video_init(), for example. We
would misdetect it as an ancient model 570 firmware.
Also, refuse to load the driver if we cannot identify the vendor. No
ACPI ThinkPad in existence lacks this information, AFAIK.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
-tip testing found:
eeepc-wmi.c:(.text+0x36673c): undefined reference to `sparse_keymap_report_event'
drivers/built-in.o: In function `eeepc_wmi_init':
eeepc-wmi.c:(.init.text+0x19cd0): undefined reference to `sparse_keymap_setup'
eeepc-wmi.c:(.init.text+0x19cf0): undefined reference to `sparse_keymap_free'
eeepc-wmi.c:(.init.text+0x19d0b): undefined reference to `sparse_keymap_free'
drivers/built-in.o: In function `eeepc_wmi_exit':
eeepc-wmi.c:(.exit.text+0x2e87): undefined reference to `sparse_keymap_free'
To fix this select INPUT_SPARSEKMAP, like the ASUS driver does.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
We were storing -1 as an unsigned int and as a result the effect of
passing -1 was the same as using 1.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Corentin Chary <corentincj@iksaif.net>
The output of wmi_get_event_data shall be freed before return.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Yong Wang <yong.y.wang@linux.intel.com>
Add backlight support for WMI based Eee PC laptops.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Reviewed-by: Corentin Chary <corentincj@iksaif.net>
Add a platform device and use it as the parent device of all sub-devices.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Reviewed-by: Corentin Chary <corentincj@iksaif.net>
Add an eeepc_wmi context structure to manage all the sub-devices
that will be implemented later on. Put input device into it first.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Reviewed-by: Corentin Chary <corentincj@iksaif.net>
Made necessary by 6992f53349 ("sysfs: Use
one lockdep class per sysfs attribute").
Prevents further "key xxx not in .data" bug-reports. Although some
attributes could probably be converted to static ones, this is left for
people having hardware to test.
Found by this semantic patch:
@ init @
type T;
identifier A;
@@
T {
...
struct device_attribute A;
...
};
@ main extends init @
expression E;
statement S;
identifier err;
T *name;
@@
... when != sysfs_attr_init(&name->A.attr);
(
+ sysfs_attr_init(&name->A.attr);
if (device_create_file(E, &name->A))
S
|
+ sysfs_attr_init(&name->A.attr);
err = device_create_file(E, &name->A);
)
While reviewing, I put the initialization to apropriate places.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg KH <gregkh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Mike Isely <isely@pobox.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a WMI driver for Eee PC laptops. Currently it only supports hotkeys.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
In function 'asus_laptop_get_info':
warning: passing argument 3 of 'asus_handle_init' from incompatible pointer type
note: expected 'char **' but argument is of type 'const char **'
Introduced by commit c21085108a02e1b838c34f3650c8cc9fbd178615
("asus-laptop: fix style problems reported by checkpath.pl").
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Properly return backlight registration error to parent.
Mark struct backlight_ops as const.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Harald Welte <laforge@gnumonks.org> (registration failure)
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Properly return backlight registration error to parent.
Mark struct backlight_ops as const.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Reviewed-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Check newly registered backlight_device for error and properly
return error to parent.
Mark struct backlight_ops as const.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Values such as max_brightness should be set before backlights are
registered, but the current API doesn't allow that. Add a parameter to
backlight_device_register and update drivers to ensure that they
set this correctly.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add ALDI/MEDION netbook E1222 to qurik reset table
Input: ALPS - fix stuck buttons on some touchpads
Input: wm831x-on - convert to use genirq
Input: ads7846 - add wakeup support
Input: appletouch - fix integer overflow issue
Input: ad7877 - increase pen up imeout
Input: ads7846 - add support for AD7843 parts
Input: bf54x-keys - fix system hang when pressing a key
Input: alps - add support for the touchpad on Toshiba Tecra A11-11L
Input: remove BKL, fix input_open_file() locking
Input: serio_raw - remove BKL
Input: mousedev - remove BKL
Input: add driver for TWL4030 vibrator device
Input: enable remote wakeup for PNP i8042 keyboard ports
Input: scancode in get/set_keycodes should be unsigned
Input: i8042 - use platfrom_create_bundle() helper
Input: wacom - merge out and in prox events
Input: gamecon - fix off by one range check
Input: wacom - replace WACOM_PKGLEN_PENABLED
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
doc: fix typo in comment explaining rb_tree usage
Remove fs/ntfs/ChangeLog
doc: fix console doc typo
doc: cpuset: Update the cpuset flag file
Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
Remove drivers/parport/ChangeLog
Remove drivers/char/ChangeLog
doc: typo - Table 1-2 should refer to "status", not "statm"
tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
devres/irq: Fix devm_irq_match comment
Remove reference to kthread_create_on_cpu
tree-wide: Assorted spelling fixes
tree-wide: fix 'lenght' typo in comments and code
drm/kms: fix spelling in error message
doc: capitalization and other minor fixes in pnp doc
devres: typo fix s/dev/devm/
Remove redundant trailing semicolons from macros
fix typo "definetly" -> "definitely" in comment
tree-wide: s/widht/width/g typo in comments
...
Fix trivial conflict in Documentation/laptops/00-INDEX
The HID layer has some scan codes of the form 0xffbc0000 for logitech
devices which do not work if scancode is typed as signed int, so we need
to switch to unsigned it instead. While at it keycode being signed does
not make much sense either.
Acked-by: Márton Németh <nm127@freemail.hu>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
msi-laptop uses rfkill*() interfaces so it should depend on RFKILL.
msi-laptop.c:(.text+0x1fcd1b): undefined reference to `rfkill_alloc'
msi-laptop.c:(.text+0x1fcd76): undefined reference to `rfkill_register'
msi-laptop.c:(.text+0x1fcdc8): undefined reference to `rfkill_destroy'
msi-laptop.c:(.text+0x1fcdd9): undefined reference to `rfkill_unregister'
This repairs "msi-laptop: Detect 3G device exists by standard ec command",
which is in some gregkh tree.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Detect 3G device exists by standard ec command. Driver will not create the threeg sysfs
file and threeg rfkill interface if there have no internal 3G device in MSI notebook/netbook.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement the resume method for set the load SCM flag after system reusme.
Without this patch, the wifi function key on SCM model will back to BIOS
control mode then confuse with the userland software control.
e.g. MSI N034
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some MSI 3G netbook only have one fn key to control Wlan/Bluetooth/3G,
those netbook will load the SCM (windows app) to disable the original
Wlan/Bluetooth control by BIOS when user press fn key, then control
Wlan/Bluetooth/3G by SCM (software control by OS). Without SCM, user
cann't on/off 3G module on those 3G netbook.
On Linux, msi-laptop driver will do the same thing to disable the
original BIOS control, then might need use HAL or other userland
application to do the software control that simulate with SCM.
e.g. MSI N034 netbook
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add threeg sysfs file for support query 3G state by standard 66/62 ec
command, the MSI standard ec interface supported this feature.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Suppport standard ec 66/62 command on MSI notebook and nebook. MSI
netbook and notebook already support 66/62 command, so, add new
get_state function, and put the old model to non-standard model, but
driver still support those old model.
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A pointer to hp_wmi_bios_setup is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Frans Pop <elendil@planet.nl>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (45 commits)
compal-laptop: Make it depend on CONFIG_RFKILL
classmate-laptop: Added some keys present in other devices
MAINTAINERS: Add git tree to x86 Platform Drivers
asus-acpi: remove duplicate comparison of asus_model strings
toshiba-acpi: fix multimedia keys on some machines
dell-laptop: Fix errors on failure and exit paths
dell-laptop: Fix build error by making buffer_mutex static
asus-laptop: fix style problems reported by checkpath.pl
asus-laptop: use device_create_file() instead of platform_group
asus-laptop: clean led code
asus-laptop: add gps rfkill
asus-laptop: set initial lcd state
asus-laptop: leds, remove dead code and fix asus_led_exit()/asus_led_init()
asus-laptop: add backlight changes notifications
asus-laptop: add bluetooth keys found on M9V
asus-laptop: switch to sparse keymap library
asus-laptop: rename wireless_status to wlan_status to avoid confusion
asus-laptop: add error check for write_acpi_int calls
asus-laptop: stop using ASUS_HANDLE and use relative methods instead
asus-laptop: rename function talking directly to acpi with asus_xxx scheme
...
-tip testing found this build failure (x86 randconfig):
drivers/built-in.o: In function `setup_rfkill':
compal-laptop.c:(.text+0x36abe8): undefined reference to `rfkill_alloc'
compal-laptop.c:(.text+0x36abfc): undefined reference to `rfkill_register'
compal-laptop.c:(.text+0x36ac30): undefined reference to `rfkill_alloc'
compal-laptop.c:(.text+0x36ac44): undefined reference to `rfkill_register'
Which can happen with CONFIG_COMPAL_LAPTOP=y but COMPAL_LAPTOP=m.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some new devices have extra keys, which we add to our list. Currently,
they all generate events that allow us to use a simple table/array,
without need for the sparse keymap.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: replace acpi_integer by u64
ACPICA: Update version to 20100121.
ACPICA: Remove unused uint32_struct type
ACPICA: Disassembler: Remove obsolete "Integer64" field in parse object
ACPICA: Remove obsolete ACPI_INTEGER (acpi_integer) type
ACPICA: Predefined name repair: fix NULL package elements
ACPICA: AcpiGetDevices: Eliminate unnecessary _STA calls
ACPICA: Update all ACPICA copyrights and signons to 2010
ACPICA: Update for new gcc-4 warning options
These tests already occur elsewhere
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some Toshibas only send ACPI events on key down, not key release. Ignore
any release events and send key down and key up events on every ACPI key
down event.
Signed-off-by: Frans Pop <elendil@planet.nl>
Make sure that work is cancelled after removing the i8042 filter, and
unregister the platform device rather than deleting it.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The following build bug (x86, allyesconfig):
arch/x86/oprofile/built-in.o:(.data+0x250): multiple definition of `buffer_mutex'
Was triggered in -tip testing, caused by this upstream commit:
116ee77: dell-laptop: Use buffer with 32-bit physical address
There's multiple buffer_mutex's in the kernel. Make this new one
static.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is two reason to do that:
- we don't want a "gps" file if the model doesn't have a gps
- we don't want to use global variables anymore
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
There is no way to find the initial lcd state. A quick workaround
is to set it "on" by default. Anyway this feature is scheduled for removal.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
We don't want to send KEY_BRIGHTNESSDOWN or KEY_BRIGHTNESSUP
because it would be a lie to tell userspace that we want
to change the brightness while it's actually done by the
firmware.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Stop using ASUS_HANDLE because most of the time it is not needed.
This macro was introduced to display_get and lcd_switch which are not
part of the interface provided by Asus, and are scheduled for removal.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
The asus-laptop driver implements a number of interfaces like the
backlight class driver. This change makes it easier to examine the
implementation of one interface at at a time, without having to search
through the file to find init() and exit() functions etc.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
(Changelog stolen from Alan's patch for eeepc-laptop, but this patch
does the same thing for asus-laptop)
Callback methods should not refer to a variable like "asus" (formally
"hotk"). Instead, they should extract the data they need either from
a "driver data" parameter, or the "driver data" field of the object
which they operate on. The "asus" variable can then be removed.
In practice, drivers under "drivers/platform" can get away without using
driver data, because it doesn't make sense to have more than one
instance of them. However this makes it harder to review them for
correctness. This is especially true for core ACPI developers who have
not previously been exposed to this anti-pattern :-).
This will serve as an example of best practice for new driver writers
(whether they find it themselves, or have it pointed out during review
:-).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
asus-laptop now does a lot more than just hotkeys. Replace the "hotk"
names used throughout the driver with some slightly more appropriate
names. The actual strings used in kernel messages and sysfs are left
unchanged.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
We already tell the backlight class our maximum brightness value; it
will validate the user requested values for us.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
These to parameter allow to set the status of wlan and bluetooth
device when the module load. On some models, the device will
always be down on boot, so the default behavior is to always
enable these devices.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Before we mark the wireless device as unplugged, check PCI config space
to see whether the wireless device is really disabled (and vice versa).
This works around newer models which don't want the hotplug code, where
we end up disabling the wired network device.
My old 701 still works correctly with this. I can also simulate an
afflicted model by changing the hardcoded PCI bus/slot number in the
driver, and it seems to work nicely (although it is a bit noisy).
In future this type of hotplug support will be implemented by the PCI
core. The existing blacklist and the new warning message will be
removed at that point.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Clemens Ladisch reports that thinkpad-acpi improperly implements the
ALSA API, and always returns 0 for success for the "put" callbacks
while the API requires it to return "1" when the control value has
been changed in the hardware/firmware.
Rework the volume subdriver to be able to properly implement the ALSA
API. Based on a patch by Clemens Ladisch <clemens@ladisch.de>.
This fix is also needed on 2.6.33.
Reported-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Given the right combination of ThinkPad and X.org, just reading the
video output control state is enough to hard-crash X.org.
Until the day I somehow find out a model or BIOS cut date to not
provide this feature to ThinkPads that can do video switching through
X RandR, change permissions so that only processes with CAP_SYS_ADMIN
can access any sort of video output control state.
This bug could be considered a local DoS I suppose, as it allows any
non-privledged local user to cause some versions of X.org to
hard-crash some ThinkPads.
Reported-by: Jidanni <jidanni@jidanni.org>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Studying the DSDTs of various thinkpads, it looks like bit 3 of the
argument to SBDC and SWAN is not "set radio to last state on resume".
Rather, it seems to be "if this bit is set, enable radio on resume,
otherwise disable it on resume".
So, the proper way to prepare the radios for S3 suspend is: disable
radio and clear bit 3 on the SBDC/SWAN call to to resume with radio
disabled, and enable radio and set bit 3 on the SBDC/SWAN call to
resume with the radio enabled.
Also, for persistent devices, the rfkill core does not restore state,
so we really need to get the firmware to do the right thing.
We don't sync the radio state on suspend, instead we trust the BIOS to
not do anything weird if we never touched the radio state since boot.
Time will tell if that's a wise way of doing things...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Thadeu Lima de Souza Cascardo reports this:
Brightness notification does not work until the user writes to
hotkey_mask attribute. That's because the polling thread will only run
if hotkey_user_mask is set and someone is reading the input device or
if hotkey_driver_mask is set. In this second case, this condition is
not tested after the mask is changed, because the brightness and
volume drivers are started after the hotkey drivers.
Fix tpacpi_hotkey_driver_mask_set() to call hotkey_poll_setup(), so
that the poller kthread will be started when needed.
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
The driver was not starting the NVRAM polling thread if the input
device was bound immediately after registration.
This fixes:
http://bugzilla.kernel.org/show_bug.cgi?id=15118
Reported-by: Florian Zumbiehl <florz@florz.de>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
We can stop pestering users for confirmation of the brightness_mode
default for firmware TP-76.
While at it, add a few missing comments in that quirk table.
Reported-by: Whoopie <whoopie79@gmx.net>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Event 0x3006 is used to help power management of the ODD in the
UltraBay. The EC generates this event when the ODD eject button is
pressed (even if the bay is powered down).
Normally, Linux doesn't need this as we keep the SATA link powered
up (which wastes power). The EC powers up the bay by itself when the
ODD eject button is pressed, and the SATA PHY reports the hotplug.
However, we could also power that SATA link down (and for that matter,
also power down the Ultrabay) if the ODD is left idle for a while with
no disk inside, and use event 0x3006 to know when we need that SATA link
powered back up.
For now, just stop asking for more information when event 0x3006 is
seen, there is no point in pestering users about it anymore.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Calling the ENAB method on Toshiba laptops results in notifications being
sent when laptop hotkeys are pressed. This patch simply calls that method
and sets up an input device if it's successful.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
The Latitude C640 has another variation of dell in its DMI vendor entry.
Add it to the whitelist in order to enjoy the sweet fruits of software
backlight toggling.
Signed-off-by: Erik Andren <erik.andren@gmail.com>
Instead of a MODULE_DEVICE_TABLE for every acpi_driver ids table, we
create a table containing all ids to export to get a module alias for
each one.
This will fix automatic loading of the driver when one of the ACPI
devices is not present (like the accelerometer, which is not present in
some models).
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Right now, we assume that the hardware rfkill switch on Dells toggles all
radio devices. In fact, this can be configured in the BIOS and so right
now we may mark a device as hardware killed even when it isn't. Add code
to query the devices controlled by the switch, and use this when
determining the hardware kill state of a radio.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Calls to communicate with system firmware via a SMI (using dcdbas)
need to use a buffer that has a physical address of 4GB or less.
Currently the dell-laptop driver does not guarantee this, and when the
buffer address is higher than 4GB, the address is truncated to 32 bits
and the SMI handler writes to the wrong memory address.
Signed-off-by: Stuart Hayes <stuart_hayes@dell.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
The Mini family doesn't support smbios 17,11 although it reports it does.
Signed-off-by: Mario Limonciello <superm1@ubuntu.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
The "hardware" switch is tied directly to a BIOS interface that will
connect and disconnect the hardware from the bus.
If you use the software interface to request the BIOS to make these
changes, the HW switch will be in an inconsistent state and LEDs may not
reflect the state of the HW.
Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com>
dell-laptop currently fails to clean up its platform device correctly.
Make sure that it's unregistered.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The rfkill interface on Dells only sends a notification that the switch
has been changed via the keyboard controller. Add a filter so we can
pick these notifications up and update the rfkill state appropriately.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
This drops the support for manually groking the files in sysfs
to turn on and off the WLAN and BT for Compal laptops in favor
of platform rfkill support.
It has been combined into a single patch to not introduce regressions
in the process of simply adding rfkill support
Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
The following Dell laptops are known to have been manufacturer by Compal
and are supported by the compal-laptop platform driver
- Mini 9
- Mini 10
- Mini 12
- Mini 10v
- Inspiron 11z
Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Set the backlight to use the current brightness when loaded, rather than
always resetting the backlight to maximum brightness.
Fixes kernel bugzilla #14207
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Reported-by: Denis Mukhin <denis_mukhin@yahoo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
sysfs_remove_group() removed the wrong attribute_group for
thermal_read_mode TPEC_8, ACPI_TMP07 and ACPI_UPDT
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_integer is now obsolete and removed from the ACPICA code base,
replaced by u64.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
CC [M] drivers/platform/x86/sony-laptop.o
drivers/platform/x86/sony-laptop.c: In function 'sony_nc_rfkill_setup':
drivers/platform/x86/sony-laptop.c:1162: warning: 'i' may be used uninitialized in this function
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Some new models need to disable wireless hotplug.
For the moment, we don't know excactly what models need that,
except 1005HA.
Users will be able to use that param as a workaround.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
This is a short term workaround for Eeepc 1005HA.
refs: <http://bugzilla.kernel.org/show_bug.cgi?id=14570>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The EeePC 4G ("701") implements CFVS, but it is not supported by the
pre-installed OS, and the original option to change it in the BIOS
setup screen was removed in later versions. Judging by the lack of
"Super Hybrid Engine" on Asus product pages, this applies to all "701"
models (4G/4G Surf/2G Surf).
So Asus made a deliberate decision not to support it on this model.
We have several reports that using it can cause the system to hang [1].
That said, it does not happen all the time. Some users do not
experience it at all (and apparently wish to continue "right-clocking").
Check for the EeePC 701 using DMI. If met, then disable writes to the
"cpufv" sysfs attribute and log an explanatory message.
Add a "cpufv_disabled" attribute which allow users to override this
policy. Writing to this attribute will log a second message.
The sysfs attribute is more useful than a module option, because it
makes it easier for userspace scripts to provide consistent behaviour
(according to user configuration), regardless of whether the kernel
includes this change.
[1] <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559578>
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 3e9b988e4e
"wmi: Free the allocated acpi objects through wmi_get_event_data"
had the same purpose as commit
44ef00e648
"hp-wmi: Fix two memleaks"
This should solve this regression:
http://bugzilla.kernel.org/show_bug.cgi?id=14890
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reported-by: Sedat Dilek <sedat.dilek@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It would appear that in BIOS's with nVidia hooks, the GUID
05901221-D566-11D1-B2F0-00A0C9062910 is duplicated. For now, the simplest
solution is to just ignore any duplicate GUIDs. These particular hooks are not
currently supported/ used in the kernel, so whoever does that can figure out
what the 'right' solution should be (if there's a better one).
http://bugzilla.kernel.org/show_bug.cgi?id=14846
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The commit 1fdd407f4e incorrectly made driver
abort loading when known GUID is present when it should have done exactly
the opposite.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER,
the caller must kfree the returned buffer if AE_OK is returned.
The callers of wmi_get_event_data() pass ACPI_ALLOCATE_BUFFER,
and thus must check its return value before accessing
or kfree() on the buffer.
Signed-off-by: Len Brown <len.brown@intel.com>
Emphasize that that wmi_install_notify_handler() returns an acpi_status
rather than -errno by by testing ACPI_SUCCESS(), ACPI_FAILURE().
No functional change in this patch, but this confusion caused a bug in dell-wmi.
Signed-off-by: Len Brown <len.brown@intel.com>
follow 0/-E convention
wmi_install_notify_handler() returns an acpi_error,
but dell_wmi_init() needs return a -errno style error.
Tested-by: Paul Rolland <rol@as2917.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Document that rfkill and ALSA functionality exists, but requires the
subsystems to be available, and not modular if thinkpad-acpi is not
modular.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Allow the user to choose through Kconfig if the Console Audio Control
interface (aka "volume subdriver") should be available or not.
This not only saves some memory, but also allows the thinkpad-acpi
driver to be built-in even if ALSA is modular when the console audio
control interface is not wanted.
This change fixes a build problem that is causing some annoyances, in
a way that doesn't disable the entire driver on kernels without ALSA
support.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Helight Xu <helight.xu@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
If we cannot create the ALSA mixer, it is a good reason to fail to
load the volume subdriver, and not to fail to load the entire module.
While at it, add more debugging messages, as the error paths are being
used a lot more than I'd expect, and it is failing to set up the ALSA
mixer on a number of ThinkPads.
Reported-by: Peter Jordan <usernetwork@gmx.info>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
We don't want to be the first soundcard. We don't want to shift other
soundcards out of the way either, even if they load much later.
Ask ALSA to (by default) load us in one of the last three slots. This
can be overriden at will using the "index" parameter.
Reported-by: Whoopie <whoopie79@gmx.net>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
The function that is executing in workqueue context does not need
to sleep so let's switch to a timer which is more lightweight.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Also use input_set_capability() helper instead of manipulating
bits directly.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
If we reschedule work instead of having work function sleep for 10 msecs
between reads from kfifo we can safely use the main workqueue (keventd)
and not bother with creating driver-private one.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
This add supports for devices like keyboard, backlight, tablet and
accelerometer.
This work is supported by International Syst S/A.
[randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI]
[akpm@linux-foundation.org: readability tweaks]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Now that we have WMI autoloading
the DMI matching is not needed anymore.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
There is no point in having the driver loaded in memory if we fail
to locate particular WMI GUID.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
These function allocate an acpi object by calling wmi_get_event_data, which
then calls acpi_evaluate_object, and it is not freed afterwards.
And kernel doc is fixed for parameters of wmi_get_event_data.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
BIOS information is now checked whether it begins with the strings stored
in the BIOS table. Previous method did a strcmp, what lead to problems if
BIOS information has appended whitespaces.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Add new BIOS versions for following netbooks: Aspire 1810xx, Packard Bell
DOTMU.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
BugLink: https://bugs.launchpad.net/ubuntu/+bug/435958
The module alias currently matches any Acer computer but when loaded the
BIOS checks will only succeed on Aspire One models. This causes a invalid
BIOS warning for all other models (seen on Aspire 4810T). This is not
fatal but worries users that see this message. Limiting the moule alias
to models starting with AOA or DOA for Packard Bell.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Peter Feuerer <peter@piie.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
SN06 makes sure we get back a longer buffer which seems to be necessary
going forward as the SNC devices describes more and more devices (or
features more precisely). Moreover SN06 should be called with only the
descriptor offset to make sure we hit the rfkill controlling function
(F124 or F135) with a 0 argument to get a full list of features.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Tested-by: Miguel Rodríguez Pérez <miguelrp@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Vaio Type X and possibly other new models use F135 as the radio
frequency controlling function attached to the SNC device. In the
indexed table this corresponds to 0x0135 (surpise!).
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix tests on return value from acpi_evaluate_integer(). Based on a patch by
Roel Kluin <roel.kluin@gmail.com> and incorporating suggestions from Len
Brown <lenb@kernel.org>.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
rename kfifo_put... into kfifo_in... to prevent miss use of old non in
kernel-tree drivers
ditto for kfifo_get... -> kfifo_out...
Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc
annotations more readable.
Add mini "howto porting to the new API" in kfifo.h
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the pointer to the spinlock out of struct kfifo. Most users in
tree do not actually use a spinlock, so the few exceptions now have to
call kfifo_{get,put}_locked, which takes an extra argument to a
spinlock.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a new generic kernel FIFO implementation.
The current kernel fifo API is not very widely used, because it has to
many constrains. Only 17 files in the current 2.6.31-rc5 used it.
FIFO's are like list's a very basic thing and a kfifo API which handles
the most use case would save a lot of development time and memory
resources.
I think this are the reasons why kfifo is not in use:
- The API is to simple, important functions are missing
- A fifo can be only allocated dynamically
- There is a requirement of a spinlock whether you need it or not
- There is no support for data records inside a fifo
So I decided to extend the kfifo in a more generic way without blowing up
the API to much. The new API has the following benefits:
- Generic usage: For kernel internal use and/or device driver.
- Provide an API for the most use case.
- Slim API: The whole API provides 25 functions.
- Linux style habit.
- DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros
- Direct copy_to_user from the fifo and copy_from_user into the fifo.
- The kfifo itself is an in place member of the using data structure, this save an
indirection access and does not waste the kernel allocator.
- Lockless access: if only one reader and one writer is active on the fifo,
which is the common use case, no additional locking is necessary.
- Remove spinlock - give the user the freedom of choice what kind of locking to use if
one is required.
- Ability to handle records. Three type of records are supported:
- Variable length records between 0-255 bytes, with a record size
field of 1 bytes.
- Variable length records between 0-65535 bytes, with a record size
field of 2 bytes.
- Fixed size records, which no record size field.
- Preserve memory resource.
- Performance!
- Easy to use!
This patch:
Since most users want to have the kfifo as part of another object,
reorganize the code to allow including struct kfifo in another data
structure. This requires changing the kfifo_alloc and kfifo_init
prototypes so that we pass an existing kfifo pointer into them. This
patch changes the implementation and all existing users.
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
net: fix for utsrelease.h moving to generated
gen_init_cpio: fixed fwrite warning
kbuild: fix make clean after mismerge
kbuild: generate modules.builtin
genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}()
score: add asm/asm-offsets.h wrapper
unifdef: update to upstream revision 1.190
kbuild: specify absolute paths for cscope
kbuild: create include/generated in silentoldconfig
scripts/package: deb-pkg: use fakeroot if available
scripts/package: add KBUILD_PKG_ROOTCMD variable
scripts/package: tar-pkg: use tar --owner=root
Kbuild: clean up marker
net: add net_tstamp.h to headers_install
kbuild: move utsrelease.h to include/generated
kbuild: move autoconf.h to include/generated
drop explicit include of autoconf.h
kbuild: move compile.h to include/generated
kbuild: drop include/asm
kbuild: do not check for include/asm-$ARCH
...
Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
Some models are equipped with an "AVMode" function key that sends
sony-laptop: Unknown event: 0x100 0xa1
sony-laptop: Unknown event: 0x100 0x21
for press and release respectively.
Cc: "Matthew W. S. Bell" <matthew@bells23.org.uk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Any of the platform API functions can fail; driver should be prepared
to handle such failures. Also:
- changed to platform_driver_probe() since the device is created
right there with the driver;
- added __devexit annotation to remove method;
- fixed memory leak on module unload - named platform_device_del() is not
enough to free platform device, need platform_device_unregister().
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Sysfs attribute group takes care of proper creation of a set of attributes
and implements proper error unwinding so the driver does not have to do it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Now depends on BACKLIGHT_CLASS_DEVICE.
Driver will return an error if it can't get actual backlight value
Fix remapping of brightness keys when backlight is not controlled by ACPI.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
There should be less code duplication with usage of gotos
Driver won't load if there's no hardware to control
Safer error handling at input driver allocation
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
This driver serves backlight (including switching) and volume up/down
keys for MSI machines providing a specific wmi interface:
551A1F84-FBDD-4125-91DB-3EA8F44F1D45
B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
Tested-by: Matt Chen <machen@novell.com>
Reviewed-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch adds support for the ACPI events generated by the RFKill
switch on modern Toshiba laptops, and re-enables the Bluetooth USB
device when the switch is flipped back to the 'on' position.
The RFKill switch brute force pulls out the USB device when flipped to
'off', but it doesn't automatically re-enable it. Without this driver,
the Bluetooth is gone until after a reboot on my Portege R500.
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Added new BIOS versions for following netbooks: Acer 1410, Gateway LT31,
Packard Bell DOA150. As the Gateway LT31 machines have different register
values for setting and checking the off-state, the "cmd_off" variable has
been splitted up to "cmd_off" and "chk_off".
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add the basic ALSA mixer functionality. The mixer is event-driven,
and will work fine on IBM ThinkPads. I expect Lenovo ThinkPads will
cause some trouble with the event interface.
Heavily based on work by Lorne Applebaum <lorne.applebaum@gmail.com>
and ideas from Matthew Garrett <mjg@redhat.com>.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Disable volume control by default. It can be enabled at module load
time by a module parameter (volume_control=1).
The audio control mixer that thinkpad-acpi interacts with is fully
functional without any drivers, and operated by hotkeys.
The idea behind the console audio control is that the human operator
is the only one that can interact with it. The ThinkVantage suite in
Windows does not allow any software-based overrides, and only does OSD
(on-screen-display) functions.
The Linux driver will, with the addition of the ALSA interface, try to
follow and enforce the ThinkVantage UI design:
The user is supposed to use the keyboard hotkeys to interact with the
console audio control. The kernel and the desktop environment is
supposed to cooperate to provide proper user feedback through
on-screen-display functions.
Distros are urged to not to enable volume control by default.
Enabling this must be a local admin's decision. This is the reason
why there is no Kconfig option.
Keep in mind that all ThinkPads have a normal, main mixer (AC97 or
HDA) for regular software-based audio control. We are not talking
about that mixer here.
Advanced users are, of course, free to enable volume control and do as
they please.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Lenovo removed the extra mixer since the T61 and thereabouts.
Newer Lenovo models only have the mute gate function, and leave
the volume control to the HDA mixer.
Until a way to automatically query the firmware about its audio
control capabilities is discovered (there might not be any), use a
white/black list.
We will likely need to ask T60 (old and new model) and Z60/Z61 users
whether they have volume control to populate the black/white list.
Meanwhile, provide a volume_capabilities parameter that can be used to
override the defaults.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
I don't trust the coupled EC writes and SMI calls the current volume
control code does very much, although it is exactly what the IBM DSDTs
seem to do (they never do more than a single step though).
Change the driver to stop issuing SMIs, and just drive the EC directly
to the desired level (DSDTs seem to confirm this will work even on
very old models like the 570 and 600e/x).
We checkpoint directly to NVRAM (this can be turned off) at
suspend/shutdown/driver unload, which from what I can see in tbp,
should also work on every ThinkPad.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We already log the initial state of the hardware rfkill switch (WLSW),
might as well log the state of the softswitches as well.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Josip Rodin <joy+kernel@entuzijast.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Before we register the input device, sync the input layer EV_SW state
through a call to input_report_switch(), to avoid issuing a gratuitous
event for the initial state of these switches.
This fixes some annoyances caused by the interaction with rfkill and
EV_SW SW_RFKILL_ALL events.
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.
It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
text data bss dec hex filename
64688 584 592 65864 10148 (TOTALS-BEFORE)
64641 584 592 65817 10119 (TOTALS-AFTER)
Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".
Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
drivers/leds/led-class.c
drivers/leds/ledtrig-timer.c
drivers/video/output.c
@@
expression str;
@@
( // ignore skip_spaces cases
while (*str && isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kbuild.h forces include of autoconf.h on the
commandline using -include - so we do not need to
include the file explicit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Newer Dell systems support HotKey features differently from legacy
systems. A new vendor specifc HotKey SMBIOS table (Type 0xB2) is
defined. This table contains a mapping between scancode and the
corresponding predefined keyfunction ( i.e. keycode).. Also, a new
ACPI-WMI event type (called KeyIDList) with a value of 0x0010 is
defined. Any BIOS containing 0xB2 table will send hotkey notifications
using KeyIDList event.
This is Rezwanul's patch, updated to ensure that brightness events are
not sent if the backlight is controlled via ACPI and with the default
keycode for the display output switching altered to match desktop
expectations.
Signed-off-by: Rezwanul Kabir <Rezwanul_Kabir@dell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
dell-laptop may not need to export any sysfs files, but it should still
create a platform device as a parent for the rfkill and backlight
devices. Otherwise sysfs will display these as "virtual" devices,
with no connection to either physical hardware or the dell-laptop
module.
Apparently this is useful for hardware detection.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
dell_setup_rfkill() already cleans up the rfkill devices on failure.
So if it returns an error, we should not try to unregister the rfkill
devices.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The current code in dell-laptop is confused about the hardware rfkill
state. Fix it up such that it's always reported correctly.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
1) Add support for reading the hardware blocked state. Previously
we read a combination of the hardware and software blocked states,
reporting it as the software blocked state. This caused some
confusing behaviour.
2) The software state is persistent, mark it as such.
3) Check rfkill in the resume handler. Both the hard and soft
blocked states may change over hibernation.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPICA: Update version to 20091112.
ACPICA: Add additional module-level code support
ACPICA: Deploy new create integer interface where appropriate
ACPICA: New internal utility function to create Integer objects
ACPICA: Add repair for predefined methods that must return sorted lists
ACPICA: Fix possible fault if return Package objects contain NULL elements
ACPICA: Add post-order callback to acpi_walk_namespace
ACPICA: Change package length error message to an info message
ACPICA: Reduce severity of predefined repair messages, Warning to Info
ACPICA: Update version to 20091013
ACPICA: Fix possible memory leak for Scope ASL operator
ACPICA: Remove possibility of executing _REG methods twice
ACPICA: Add repair for bad _MAT buffers
ACPICA: Add repair for bad _BIF/_BIX packages
As Corentin points out, we do not create a backlight device if the ACPI
video driver is able to provide equivalent functionality. So we do need
to check before we try to update the backlight device.
We now ignore brightness events completely if we have not created a
backlight device. This is slightly more cautious than the original
check.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
fix styles problems introduced by commit
e86bda235a08b6a8e64c1e8bb9d175f6961554e3
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Lenovo SL series laptop has a very similar DSDT with Asus laptops. We can
easily have the extra ACPI function support with little modification in
asus-laptop.c
Here is the hotkey enablement for Lenovo SL series laptop.
This patch will enable the following hotkey:
- Volumn Up
- Volumn Down
- Mute
- Screen Lock (Fn+F2)
- Battery Status (Fn+F3)
- WLAN switch (Fn+F5)
- Video output switch (Fn+F7)
- Touchpad switch (Fn+F8)
- Screen Magnifier (Fn+Space)
The following function of Lenovo SL laptop is still need to be enabled:
- Hotkey: KEY_SUSPEND (Fn+F4), KEY_SLEEP (Fn+F12), Dock Eject (Fn+F9)
- Rfkill for bluetooth and wlan
- LenovoCare LED
- Hwmon for fan speed
- Fingerprint scanner
- Active Protection System
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The same key is used in toshiba-laptop, and there is no
reserved key for that.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Callback methods should not refer to a variable like "eeepc" (formally
"ehotk"). Instead, they should extract the data they need either from
a "driver data" parameter, or the "driver data" field of the object
which they operate on. The "eeepc" variable can then be removed.
In practice, drivers under "drivers/platform" can get away without using
driver data, because it doesn't make sense to have more than one
instance of them. However this makes it harder to review them for
correctness. This is especially true for core ACPI developers who have
not previously been exposed to this anti-pattern :-).
This will serve as an example of best practice for new driver writers
(whether they find it themselves, or have it pointed out during review
:-).
The hwmon sub-device is a special case. It uses ec_{read,write} which
are defined to communicate with the (first) EC, so it does not require
any driver data. It should still only be instantiated in the context of
an ASUS010 device because we don't have a safe way to probe for it.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
eeepc-laptop now does a lot more than just hotkeys. Replace the "hotk"
names used throughout the driver with some slightly more appropriate
names. The actual strings used in kernel messages and sysfs are left
unchanged.
e.g.
EEEPC_HOTK_FILE -> EEEPC_LAPTOP_FILE
EEEPC_HOTK_HID -> EEEPC_ACPI_HID
eeepc_hotk_notify -> eeepc_acpi_notify
struct eeepc_hotk -> struct eeepc_laptop
ehotk -> eeepc
I'm about to refactor the entire driver to remove the global "ehotk"
variable, and I don't wish to add "struct eeepc_hotk *ehotk" to
functions which have nothing to do with hotkeys.
Also
- fix the name of "eepc_get_entry_by_keycode()"
- remove the unused definition of NOTIFY_WLAN_ON.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Move e.g. backlight_init() and backlight_exit() together along with the
other backlight functions, instead of grouping init() and exit()
functions. Move e.g. backlight_ops to follow the functions it refers
to, and remove the forward declarations. The code itself should remain
unchanged.
The eeepc-laptop driver implements a number of interfaces like the
backlight class driver. This change makes it easier to examine the
implementation of one interface at at a time, without having to search
through the file to find init() and exit() functions etc.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
This moves the sysfs_create_group() call just after the declaration of
the platform device attributes. It should make it easier to examine
the implementation of the platform device attributes in isolation
from the rest of the code. (The next commit will apply this pattern
to all of the sub-devices as well).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk
Signed-off-by: Len Brown <len.brown@intel.com>
Strictly speaking we should register the platform driver exactly once,
whether there are zero, one, or multiple matching acpi devices.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Separate out input_notify(), in a similar way to how notify_brn()
is already separated. This will allow all the functions which refer to
the input device to be grouped together.
This includes a small behaviour change - we now synthesize brightness
up/down key events even if the brightness is already at the
maximum/minimum value. This is consistent with the new uevent
interface.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The hwmon device uses ec_write() to write values to the EC. So for
consistency it should use ec_read() to read values. The extra layers
of indirection used did not add any value.
This may mean we no longer take the ACPI global lock for such reads
(if the EC operation region requires the lock and the EC does not).
But there is no point locking each one-byte read individually, when
write operations do not use the lock at all.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
We don't need to store init_flags after using them. And we don't use
the result of INIT, so we don't need to allocate a buffer for it.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
We already tell the backlight class our maximum brightness value; it
will validate the user requested values for us.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
eeepc_hotk_notify() cannot be called with ehotk == NULL or bd == NULL.
We check both variables for allocation failure and would bail out before
the notifier is registered.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
If the control method does not exist, return -ENODEV for consistency
with get_acpi()
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
If we bail out because we can't create the led class device, we need to
ensure the led workqueue is cleaned up.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Create the workqueue thread used by tpd_led_set() *before* we register
the led device. (And vice versa for unregistration).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Documentation/hwmon/sysfs-interface tells us that automatic fan speed
control should be represented by a value of 2 or above for pwm1_enable.
Fix eeepc_get_fan_ctrl() to return 2 for automatic fan control.
Setting "1" for manual control is already consistent with the
documentation, so this remains unchanged.
Let's preserve the ABI for this specific driver, so that writing "0"
will still invoke automatic control.
(The documentation says setting "0" should leave the fan at full speed
all the time. This mode is not directly supported by our hardware. Full
speed is rather noisy on my 701 and the automatic control has never used
it. If you really want this e.g. to prolong the life of an EeePC used
as a server, you can always use manual mode. hwmon has always been
fairly machine-specific, and you're in a tiny minority (or elite :-).
I'm sure you're smart enough to notice that the fan doesn't turn on to
full speed when you try this mode, either by ear or checking
fan_input1.
We could even claim to be honouring the spirit of the documentation.
"0" really means "safe mode". EeePCs default to automatic mode, ie that
is what Asus will actually test. Since we do not provide any way to
tamper with the temperature threshold, automatic mode _is_ the safe
option).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.
After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = acpi_dev->driver;
if (acpi_drv && acpi_drv->ops.suspend)
return acpi_drv->ops.suspend(acpi_dev, state);
Remove all checks for acpi_dev == NULL within these callbacks.
Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.
After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.
After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = acpi_dev->driver;
if (acpi_drv && acpi_drv->ops.suspend)
return acpi_drv->ops.suspend(acpi_dev, state);
Remove all checks for acpi_dev == NULL within these callbacks.
Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = acpi_dev->driver;
if (acpi_drv && acpi_drv->ops.suspend)
return acpi_drv->ops.suspend(acpi_dev, state);
Remove all checks for acpi_dev == NULL within these callbacks.
Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, reading from the disp attribute fails with "No such device",
which is misleading. According to CMSG table on acpi4asus project site,
no models have a getter method corresponding to SDSP. Change the file
permission to disallow reads.
If some joker changes the permission to permit reads, then return -EIO
to be consistent with sysfs' behaviour when no show() method is
provided.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Use input_set_capability() instead of set_bit.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Log temperatures on any of the EC thermal alarms. It could be
useful to help tracking down what is happening...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
Export the normal (non-command) module paramenters as mode 0444, so
that they will show up in sysfs.
These parameters must not be changed at runtime as a rule, with very
few exceptions.
Reported-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Properly init the parent field of the input device. Thanks to Alan
Jenkins, who noted this problem in a different driver.
Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix this bogus warning during module shutdown, when
backlight event reporting is enabled:
"thinkpad_acpi: required events 0x00018000 not enabled!"
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Take advantage of the new events capabilities of the backlight class to
notify userspace of backlight changes.
This depends on "backlight: Allow drivers to update the core, and
generate events on changes", by Matthew Garrett.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Since the rfkill rework in 2.6.31, the driver is always resuming with
the radios disabled.
Change thinkpad-acpi to ask the firmware to resume with the radios in
the last state. This fixes the Bluetooth and WWAN rfkill switches.
Note that it means we respect the firmware's oddities. Should the
user toggle the hardware rfkill switch on and off, it might cause the
radios to resume enabled.
UWB is an unknown quantity since it has nowhere the same level of
firmware support (no control over state storage in NVRAM, for
example), and might need further fixing. Testers welcome.
This change fixes a regression from 2.6.30.
Reported-by: Jerone Young <jerone.young@canonical.com>
Reported-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: Ian Molton <ian.molton@collabora.co.uk>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
According to a report, the R50e wants EC-based brightness control,
even if it uses an Intel GPU. The current driver default was reported
to not work at all.
This bug can be worked around by the "brightness_mode=3" module
parameter.
Change the default of the R50e and R51 2xxx models (which use the same
EC firmware, 1V) to TPACPI_BRGHT_Q_EC, but keep TPACPI_BRGHT_Q_ASK set
for now, as I'd like to get more reports.
This fixes a regression caused by commit
59fe4fe34d,
"thinkpad-acpi: fix incorrect use of TPACPI_BRGHT_MODE_ECNVRAM"
Kernel 2.6.31 also needs this fix.
Reported-by: Ferenc Wagner <wferi@niif.hu>
Tested-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Return temperature in milidegree instead of degree, as sysfs-api requires
the temperature in milidegree.
Signed-off-by: Peter Feuerer <peter@piie.net>
Tested-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
There is a problem in the quirk tables used by tpacpi_is_fw_known() and
tpacpi_check_outdated_fw(), which causes outdated BIOSes that are lacking
the EC firmware ID DMI field to never match.
This breaks module loading on, e.g. a T23 with outdated BIOS, and the
module will refuse to load unless the "force_load=1" parameter is given.
Fix the quirk tables so that they can also match the outdated BIOSes,
which in turn will both fix the module loading, and also warn the user
that he is using outdated firmware and should upgrade.
This fixes a serious regression, introduced by commit
e675abafcc, "thinkpad-acpi: be more strict
when detecting a ThinkPad".
http://bugzilla.kernel.org/show_bug.cgi?id=14597
Reported-by: Paul Kimoto <kimoto@lightlink.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: Paul Kimoto <kimoto@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
The returned error should be negative
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
The existing interface only has a pre-order callback. This change
adds an additional parameter for a post-order callback which will
be more useful for bus scans. ACPICA BZ 779.
Also update the external calls to acpi_walk_namespace.
http://www.acpica.org/bugzilla/show_bug.cgi?id=779
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
WMI provides interface-specific GUIDs that are exported from modules as
modalises, but the core currently generates no events to trigger module
loading. This patch adds support for registering devices for each WMI GUID
and generating the appropriate uevent.
Based heavily on a patch by Carlos Corbacho (<carlos@strangeworlds.co.uk>).
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Switching the camera takes 500ms, checking if it's on is almost free...
The BIOS remembers the setting through reboots, so there's good chance the
camera is already enabled.
Signed-off-by: Luca Niccoli <lultimouomo@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
rt2860sta is fine with the patch as is, but iwl3945 isn't
(eeepc_rfkill_set() needs to call eeepc_rfkill_hotplug(true) – which means
that we're back to causing the rt2860sta panic
This reverts commit b56ab33d68.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
This works around what I think is actually a bug in rt2860sta which is
triggered when the hardware "disappears" from beneath the driver, i.e. when
wireless is toggled off via ACPI. It does so by ensuring that the rfkill
soft-block flag is set before the hardware is disabled.
I do not know whether this patch is required if rt2800pci is in use instead
of rt2860sta; at the time of submission of this patch, I've not been able to
test this.
(Ref. http://bugzilla.kernel.org/show_bug.cgi?id=13390)
Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently the annotation for function eeepc_enable_camera() is
__init, and refers to a
function eeepc_hotk_add() which is non-init. Use __devinit for both
functions which is
more appropriate and fixes a section mismatch warning.
We were warned by the following warning:
LD drivers/platform/x86/built-in.o
WARNING: drivers/platform/x86/built-in.o(.text+0x12e1): Section
mismatch in reference from the function eeepc_hotk_add() to the
function .init.text:eeepc_enable_camera()
The function eeepc_hotk_add() references
the function __init eeepc_enable_camera().
This is often because eeepc_hotk_add lacks a __init
annotation or the annotation of eeepc_enable_camera is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
A follow-up 2.6.32-rc1's
1e384cb0f9
"fujitsu-laptop: support led-class as module"
It's a trivial fix for one of the CONFIG_LEDS_CLASS ifdefs
which was somehow missed in the original patch.
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
sony-laptop: re-read the rfkill state when resuming from suspend
sony-laptop: check for rfkill hard block at load time
wext: add back wireless/ dir in sysfs for cfg80211 interfaces
wext: Add bound checks for copy_from_user
mac80211: improve/fix mlme messages
cfg80211: always get BSS
iwlwifi: fix 3945 ucode info retrieval after failure
iwlwifi: fix memory leak in command queue handling
iwlwifi: fix debugfs buffer handling
cfg80211: don't set privacy w/o key
cfg80211: wext: don't display BSSID unless associated
net: Add explicit bound checks in net/socket.c
bridge: Fix double-free in br_add_if.
isdn: fix netjet/isdnhdlc build errors
atm: dereference of he_dev->rbps_virt in he_init_group()
ax25: Add missing dev_put in ax25_setsockopt
Revert "sit: stateless autoconf for isatap"
net: fix double skb free in dcbnl
net: fix nlmsg len size for skb when error bit is set.
net: fix vlan_get_size to include vlan_flags size
...
Without this, the hard-blocked state will be reported incorrectly if
the hardware switch is changed while the laptop is suspended.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: Norbert Preining <preining@logic.at>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
"I recently (on a flight) I found out that when I boot with the hard-switch
activated, so turning off all wireless activity on my laptop, the state
is not correctly announced in /dev/rfkill (reading it with rfkill command,
or my own gnome applet)...
After turning off and on again the hard-switch the events were right."
We can fix this by querying the firmware at load time and calling
rfkill_set_hw_state().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: Norbert Preining <preining@logic.at>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Mattia Dongili <malattia@linux.it>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This is unnecessary as OSPM is supposed to call the method already when
the device is discovered.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
The SPIC irq is not really shareable, the IO port cannot be cleared and
always returns some data so there is no real way to understand if the irq
is for us or not. Moreover the _PRS acpi method says the irq is not
shareable.
In addition to this, in some cases, an additional write to the IO port has
to be performed in order to properly decode the event received from the
device. This generates another interrupt which may overlap with the
previous one. In the future this is going to be important for properly
decoding events.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Having separate drivers for SPIC showed to be useless, only type3 has a
slightly different behaviour than the others and there seem to be no real
conflict between them.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix this problem when CONFIG_THINKPAD_ACPI_HOTKEY_POLL is undefined:
CHECK drivers/platform/x86/thinkpad_acpi.c
drivers/platform/x86/thinkpad_acpi.c:1968:21: error: not an lvalue
CC [M] drivers/platform/x86/thinkpad_acpi.o
drivers/platform/x86/thinkpad_acpi.c: In function 'tpacpi_hotkey_driver_mask_set':
drivers/platform/x86/thinkpad_acpi.c:1968: error: lvalue required as left operand of assignment
Reported-by: Noah Dain <noahdain@gmail.com>
Reported-by: Audrius Kazukauskas <audrius@neutrino.lt>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
backlight: new driver for ADP5520/ADP5501 MFD PMICs
backlight: extend event support to also support poll()
backlight/eeepc-laptop: Update the backlight state when we change brightness
backlight/acpi: Update the backlight state when we change brightness
backlight: Allow drivers to update the core, and generate events on changes
backlight: switch to da903x driver to dev_pm_ops
backlight: Add support for the Avionic Design Xanthos backlight device.
backlight: spi driver for LMS283GF05 LCD
backlight: move hp680-bl's probe function to .devinit.text
backlight: Add support for new Apple machines.
backlight: mbp_nvidia_bl: add support for MacBookAir 1,1
backlight: Add WM831x backlight driver
Trivial conflicts due to '#ifdef CONFIG_PM' differences in
drivers/video/backlight/da903x_bl.c
Trigger a status update when the user hits a brightness key, allowing
userspace to present appropriate UI.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Reduce the number of magic numbers in the driver... note that they
were all explained and documented already.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add an internal API to the driver, to allow subdrivers to request and
receive HKEY 0x1000 events. This API will be used by the backlight
(brightness up/down) and upcoming ALSA mixer (volume up/down/mute)
subdrivers.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Update the HKEY event driver to:
1. Handle better the second-gen firmware, which has no HKEY mask
support but does report FN+F3, FN+F4 and FN+F12 without the need
for NVRAM polling.
a) always make the mask-related attributes available in sysfs;
b) use DMI quirks to detect the second-gen firmware;
c) properly report that FN+F3, FN+F4 and FN+F12 are enabled,
and available even on mask-less second-gen firmware;
2. Decouple the issuing of hotkey events towards userspace from
their reception from the firmware. ALSA mixer and brightness
event reporting support will need this feature.
3. Clean up the mess in the hotkey driver a great deal. It is
still very convoluted, and wants a full refactoring into a
proper event API interface, but that is not going to happen
today.
4. Fully reset firmware interface on resume (restore hotkey
mask and status).
5. Stop losing polled events for no good reason when changing the
mask and poll frequencies. We will still lose them when the
hotkey_source_mask is changed, as well as any that happened
between driver suspend and driver resume.
The hotkey subdriver now has the notion of user-space-visible hotkey
event mask, as well as of the set of "hotkey" events the driver needs
(because brightness/volume change reports are not just keypress
reports in most ThinkPad models).
With this rewrite, the ABI level is bumped to 0x020500 should
userspace need to know it is dealing with the updated hotkey
subdriver.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
HKEY event 0x5010 is useless to us: old ThinkPads don't issue it. Newer
ThinkPads won't issue it anymore. And all ThinkPads issue 0x1010 and
0x1011 events.
Just silently drop it instead of sending it to userspace.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
hotkey_exit() is only called if hotkey_init() finished sucessfully, or
by direct calls inside hotkey_init(). The tp_features.hotkey test is
always true, and just adds to the confusion, remove it. Also, avoid
calling hotkey_mask_set() when it won't do anything useful.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
backlight_device_register returns ERR_PTR() in case of problems, and
the current code would leave that ERR_PTR in ibm_backlight_device.
The current code paths won't touch it in that situation, but that could
change. Make sure to set ibm_backlight_device to NULL in the error
path.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
- Apply Borislav Petkov's patch (convert the fancmd[] array to a real
struct thus disambiguating command handling and making code more
readable.)
- Add BIOS product to BIOS table as AOA110 and AOA150 have different
register values
- Add force_product parameter to allow forcing different product
- fix linker warning caused by "acerhdf_drv" not being named
"acerhdf_driver"
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Andreas Mohr <andi@lisas.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy()
In this case, rfkill_destroy was called two times on wifi_rfkill and
never on bluetooth_rfkill.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This adds Topstar Laptop Extras ACPI driver. It enables hotkeys
functionality with Topstar N01 netbook. Besides hotkeys there are
other functions exposed by its ACPI firmware, but for now only
hotkeys reporting on Topstar N01 is supported. Topstar is a chinese
manufacturer, its website can be currently reached at
http://www.topstardigital.cn/
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Reviewed-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy()
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Report KEY_BRIGHTNESSUP and KEY_BRIGHTNESSDOWN input events when the
ThinkPad is in "passive brightness control" mode (because either we or
ACPI video touched _BCL), and ACPI video is not processing these
events by itself.
This happens only on Lenovo ThinkPads with ACPI video support, when
operating with the ACPI video driver in acpi_backlight=vendor mode.
Issuing these events is the right thing to do, and will work around
bugzilla #13368, if userspace is properly configured and actively
handles these events.
For other ThinkPads, and when ACPI video is handling brightness
changes, thinkpad-acpi will continue NOT sending KEY_BRIGHTNESS*
events by default.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Init hotkey_source_mask late, so that we can make use of
hotkey_reserved_mask to avoid polling any of the reserved
hotkeys by default.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
echo "reset" > /proc/acpi/ibm/hotkey should do something non-useless,
so instead of setting it to Fn+F2, Fn+F3, Fn+F5, set it to
hotkey_recommended_mask.
It is not like it will survive for much longer, anyway.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Some analysis of the ACPI DSDTs shows that the HKEY pre-enabled mask
is always 0x80c (FN+F3,FN+F4 and FN+F12), which are the hotkeys that
the second gen of HKEY firmware supported (the first gen didn't report
any hotkeys, the second reported these tree hotkeys but had no mask
support, and the third added mask support).
So, this is probably some sort of backwards compatibility with older
versions of the IBM ThinkVantage suite. We have no use for that, and
I know of exactly ZERO users of that attribute, anyway. Start the
process of getting rid of it.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix some locking, avoid exiting the kthread before kthread_stop() is
called on it, and clean up the hotkey poll routines a little bit.
Also, restore bits in the firmware mask after hotkey_source_mask is
changed. Without this, we leave events disabled...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Use stricter checks to decide that we're running on a supported ThinkPad.
This should remove some possible false positives, although nobody ever
bothered to report any.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Use the quirk infrastructure to warn of outdated firmware and also of
firmware versions that are known to cause problems.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
X40 (firmware 1V) and T41 (firmware 1R) have been confirmed to work
well with the new defaults, so we can stop pestering people to confirm
that fact.
For now, whitelist just these two firmware types. It is best to have
at least one more firmware type confirmed for Radeon 9xxx and Intel
GMA-2 ThinkPads before removing the confirmation requests entirely.
Reported-by: Robert de Rooy <robert.de.rooy@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
The serio ports on i8042 are not completely isolated; while we provide
enough locking to ensure proper serialization when accessing control
and data registers AUX and KBD ports can still have an effect on each
other on PS/2 protocol level. The most prominent effect is that
issuing a command for the device connected to one port may cause
abort of the command currently executing by the device connected to
another port.
Since i8042 nor serio subsystem are not aware of the details of the
PS/2 protocol (length of the commands and their replies and so on) the
locking should be done on libps2 level by adding special handling when
we see that we are dealing with serio port on i8042.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Gets rid of the following warning:
Platform driver 'hp-wmi' needs updating - please use dev_pm_ops
I tested that the resume handler still works on my HP 2510p notebook.
[rjw: Fixed up the definition of hp_wmi_pm_ops.]
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The 900A provides hotplug notifications on a different ACPI object to
other models.
Reported-by: Trevor <trevor.chart@gmail.com>
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy()
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.
Add GPL commment to internal.h while we are there.
This does not change any actual console output,
asside from a whitespace fix.
Signed-off-by: Len Brown <len.brown@intel.com>
checkpatch doesn't like tab+space for a return statement.
WARNING: suspect code indent for conditional statements (8, 17)
+ if (!device)
+ return -EINVAL;
Signed-off-by: Len Brown <len.brown@intel.com>
Add support for the Fn+F3/Fn+F4 keys and map them
as KEY_KBDILLUMUP and KEY_KBDILLUMDOWN.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Add support for keyboard backlight found in Asus U50VG.
The SMC driver for the Apples does it via LED. To be
consistent with that we create /sys/class/leds/asus::kbd_backlight/
to control the keyboard backlight.
SLKB and GLKB are used to get/set the backlight. On
the U50VG is supports 4 brightness level, but this may
change with other models.
SLKB take a 8 bit integer where the higher bit is used
to toggle the backlight, and the over 7 bits control the
brightness level.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Set the right maximum brightness which is one, because
they can only be on or off.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Add support for getting led brightness directly from
the hardware. Currently we don't need it, but it is needed
to support keyboard backlight/led.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Show HRWS in /sys/platform/devices/asus-laptop/infos.
HRWS is a bitfield used to get information about Hardware
available in the laptop.
Also change sprintf format from 0x%04x to %#x.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
This also involves switching the resume handler from the acpi device
to the platform device. Using the more fine grained handlers allows
two improvements:
1. We only need to recheck rfkill state after resume from hibernation.
2. The wireless LED workaround accounts for up to 1.1s out of 1.7s
resuming devices (when wireless is enabled). We can limit the
workaround to thaw(), so that it only delays suspend to disk.
The workaround is only likely to help when hibernation is aborted.
Suspend to ram cannot be aborted by the user. Device suspend errors may
well happen before eeepc-laptop would even be frozen. Suspend errors
which happen after that could be pretty funky anyway.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Actually it is only the LED which is affected. The bios bug does not
disable the wifi.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
All the rfkill devices are treated as "persistent", 3G is no exception.
This means their state may change over hibernation.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_set_sw_state() will already be called by eeepc_rfkill_hotplug().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Sysfs showed the ehotk input device as a "virtual" device - lies!
The input device is provided by a physical device, the eeepc platform.
This requires that we move the creation of the input device to come
after platform device is created. Input initialization is moved from
ehotk_check() [sic] to a new function called eeepc_input_init(). This
brings the input device into line with the other eeepc-laptop devices.
Also, refuse to load if we fail to register the input device.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
1. input and backlight devices were registered after acpi notifications
are enabled. This left a window where eeepc_hotk_notify() might
find these devices in an inconsistent (half-initialized) state.
-> Move all device registration into eeepc_hotk_add(), which is called
before enabling acpi notifications.
2. input and backlight devices were unregistered before acpi
notifications are disabled. This left a window where
eeepc_hotk_notify() might find these devices in an inconsistent
(half-destroyed) state.
-> Move all device unregistration into eeepc_hotk_remove(), which is
called after disabling acpi notifications.
3. The acpi driver was not freed if an error occured further down in
eeepc_laptop_init().
-> The rest of eeepc_laptop_init() has been moved to eeepc_hotk_add(),
so this is no longer a problem.
4. The acpi driver was unregistered before the platform driver. This
left a window where a sysfs access could attempt to read the ehotk
structure after it had been freed by eeepc_hotk_remove().
-> The acpi driver is now unregistered as the last step in
eeepc_laptop_exit(), so this is no longer a problem.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Wifi rfkill state changes can race with pci hotplug cleanup. A simple
fix is to refresh the hotplug state just before deregistering the pci
hotplug slot.
There is also potential for a hotplug notification to fire too early
during setup, while the structures it uses are still being initialised.
(This could only happen if the BIOS performs hotplug itself; a bug
triggered by removing the battery while hibernated). Avoid this by
registering the notifier later. The same refresh mechanism is used
to handle rfkill state changes which can now race with registration.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit d0265f0 "eeepc-laptop: fix hot-unplug on resume" used a workqueue
to protect pci hotplug against multiple simultaneous calls during
resume. It seems to work, but a mutex would be more appropriate.
This is in preparation to fix the potential pci hotplug race on unload.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The whole point of registering as a PCI hotplug driver was to prevent
conflict with pciehp. At the moment it happens to work because
eeepc-laptop is loaded first, but it doesn't work the other way round.
If pciehp is loaded first then we fail to claim the slot - we need to
respect this and not handle hotplug events.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Increment driver version to reflect the changes from this patch series.
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
* Move led_classdev_unregister() calls from fujitsu_cleanup() to
acpi_fujitsu_hotkey_remove().
* Fix ordering in fujitsu_cleanup().
* Fix backlight_device_register() failure handling in fujitsu_init().
* Add missing sysfs group removal on failure to fujitsu_init().
* Add input device unregistering on failure to acpi_fujitsu_add()
and acpi_fujitsu_hotkey_add().
* Add input device unregistering/freeing to acpi_fujitsu_remove()
and acpi_fujitsu_hotkey_remove() (also remove superfluous 'device'
and 'acpi_driver_data(device)' checks while at it).
* Do few minor cleanups.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
This takes care of the following entries from Dan's list:
drivers/platform/x86/fujitsu-laptop.c +327 set_lcd_level(13) warning:
variable derefenced before check 'fujitsu'
drivers/platform/x86/fujitsu-laptop.c +358 set_lcd_level_alt(13) warning:
variable derefenced before check 'fujitsu'
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
device and acpi_driver_data(device) were tested just a few lines above.
A simplified version of the semantic match that finds this problem is as
follows: (http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
expression E;
@@
if (x == NULL || ...) { ... when forall
return ...; }
.. when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\)
(
*x == NULL
|
*x != NULL
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
Support fujitsu-laptop with led-class built as a module instead of
being compiled in.
Signed-off-by: Stephen Gildea <stepheng+linux@gildea.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch is a trivial fix for a config corner case, ensuring that
fujitsu-laptop doesn't get compiled into the kernel when the led class
is a module.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
Return from bt_rfkill_poll() when hci_get_radio_state() fails.
value is invalid in that case and should not be assigned to the rfkill
state.
This also fixes a double unlock bug.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Completed a major update for the acpi_get_object_info external interface.
Changes include:
- Support for variable, unlimited length HID, UID, and CID strings
- Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
- Call the _SxW power methods on behalf of a device object
- Determine if a device is a PCI root bridge
- Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.
Also, update all invocations of acpi_get_object_info interface
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Summary:
Kernel panic arise when stack protection is enabled, since strncat will
add a null terminating byte '\0'; So in functions
like this one (wmi_query_block):
char wc[4]="WC";
....
strncat(method, block->object_id, 2);
...
the length of wc should be n+1 (wc[5]) or stack protection
fault will arise. This is not noticeable when stack protection is
disabled,but , isn't good either.
Config used: [CONFIG_CC_STACKPROTECTOR_ALL=y,
CONFIG_CC_STACKPROTECTOR=y]
Panic Trace
------------
.... stack-protector: kernel stack corrupted in : fa7b182c
2.6.30-rc8-obelisco-generic
call_trace:
[<c04a6c40>] ? panic+0x45/0xd9
[<c012925d>] ? __stack_chk_fail+0x1c/0x40
[<fa7b182c>] ? wmi_query_block+0x15a/0x162 [wmi]
[<fa7b182c>] ? wmi_query_block+0x15a/0x162 [wmi]
[<fa7e7000>] ? acer_wmi_init+0x00/0x61a [acer_wmi]
[<fa7e7135>] ? acer_wmi_init+0x135/0x61a [acer_wmi]
[<c0101159>] ? do_one_initcall+0x50+0x126
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13514
Signed-off-by: Costantino Leandro <lcostantino@gmail.com>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OOPS on resume when the wireless adaptor is disabled during suspend was
introduced by "eeepc-laptop: read rfkill soft-blocked state on resume".
Unable to handle kernel NULL pointer dereference
Process s2disk
Tainted: G W
IP: klist_put
Call trace:
? klist_del
? device_del
? device_unregister
? pci_stop_dev
? pci_stop_bus
? pci_remove_device
? eeepc_rfkill_hotplug [eeepc_laptop]
? eeepc_hotk_resume [eeepc_laptop]
? acpi_device_resume
? device_resume
? hibernation_snapshot
It appears the PCI device is removed twice. The eeepc_rfkill_hotplug()
call from the resume handler is racing against the call from the ACPI
notifier callback. The ACPI notification is triggered by the resume
handler when it refreshes the value of CM_ASL_WLAN.
The fix is to serialize hotplug calls using a workqueue.
http://bugzilla.kernel.org/show_bug.cgi?id=13825
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
HBRV-based default selection of backlight control strategy didn't work
well, at least the X41 defines it but doesn't use it and I don't think
it will stop there.
Switch to a white/blacklist. All models that have HBRV defined have
been included in the list, and initially all ATI GPUs will get
ECNVRAM, and the Intel GPUs will get UCMS_STEP.
Symptoms of incorrect backlight mode selection are:
1. Non-working backlight control through sysfs;
2. Backlight gets reset to the lowest level at every shutdown, reboot
and when thinkpad-acpi gets unloaded;
This fixes a regression in 2.6.30, bugzilla #13826
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Tobias Diedrich <ranma+kernel@tdiedrich.de>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
The standard ACPI dock driver can handle the hotplug bays and docks of
the ThinkPads just fine (including batteries) as of 2.6.27, and the
code in thinkpad-acpi for the dock and bay subdrivers is currently
broken anyway...
Userspace needs some love to support the two-stage ejection nicely,
but it is simple enough to do through udev rules (you don't even need
HAL) so this wouldn't justify fixing the dock and bay subdrivers,
either.
That leaves warm-swap bays (_EJ3) support for thinkpad-acpi, as well
as support for the weird dock of the model 570, but since such support
has never left the "experimental" stage, it is also not a strong
enough reason to find a way to fix this code.
Users of ThinkPads with warm-swap bays are urged to request that _EJ3
support be added to the regular ACPI dock driver, if such feature is
indeed useful for them.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, the ThinkPad-ACPI bay and dock drivers are completely
broken, and cause a NULL pointer derreference in kernel mode (and,
therefore, an OOPS) when they try to issue events (i.e. on dock,
undock, bay ejection, etc).
OTOH, the standard ACPI dock driver can handle the hotplug bays and
docks of the ThinkPads just fine (including batteries) as of 2.6.27.
In fact, it does a much better job of it than thinkpad-acpi ever did.
It is just not worth the hassle to find a way to fix this crap without
breaking the (deprecated) thinkpad-acpi dock/bay ABI. This is old,
deprecated code that sees little testing or use.
As a quick fix suitable for -stable backports, mark the thinkpad-acpi
bay and dock subdrivers as BROKEN in Kconfig. The dead code will be
removed by a later patch.
This fixes bugzilla #13669, and should be applied to 2.6.27 and later.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Joerg Platte <jplatte@naasa.net>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Some systems may not support input events, or registering the input
handler may have failed. So check that an input device exists before
trying to set the docking and tablet mode state during resume.
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13865
Reported-and-tested-by: Cédric Godin <cedric@belbone.be>
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits)
cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
net: irda: init spinlock after memcpy
ixgbe: fix for 82599 errata marking UDP checksum errors
r8169: WakeOnLan fix for the 8168
netxen: reset ring consumer during cleanup
net/bridge: use kobject_put to release kobject in br_add_if error path
smc91x.h: add config for Nomadik evaluation kit
NET: ROSE: Don't use static buffer.
eepro: Read buffer overflow
tokenring: Read buffer overflow
at1700: Read buffer overflow
fealnx: Write outside array bounds
ixgbe: remove unnecessary call to device_init_wakeup
ixgbe: Don't priority tag control frames in DCB mode
ixgbe: Enable FCoE offload when DCB is enabled for 82599
net: Rework mdio-ofgpio driver to use of_mdio infrastructure
register at91_ether using platform_driver_probe
skge: Enable WoL by default if supported
net: KS8851 needs to depend on MII
be2net: Bug fix in the non-lro path. Size of received packet was not updated in statistics properly.
...
Fix another polarity error introduced by the rfkill rewrite,
this time in acer_rfkill_set().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
cxgb3: Fix crash caused by stashing wrong netdev_queue
ixgbe: Fix coexistence of FCoE and Flow Director in 82599
memory barrier: adding smp_mb__after_lock
net: adding memory barrier to the poll and receive callbacks
netpoll: Fix carrier detection for drivers that are using phylib
includecheck fix: include/linux, rfkill.h
p54: tx refused but queue active
Atheros Kconfig needs to be dependent on WLAN_80211
mac80211: fix docbook
mac80211_hwsim: avoid NULL access
ssb: Add support for 4318E
b43: Add support for 4318E
zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
zd1211rw: 07b8:6001 is a ZD1211B
r6040: bump driver version to 0.24 and date to 08 July 2009
r6040: restore MIER register correctly when IRQ line is shared
ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
davinci_emac: fix kernel oops when changing MAC address while interface is down
igb: set lan id prior to configuring phy
mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
...
Fix the third (I think) polarity error I accidentally
introduced in the rfkill rewrite to make wireless work
again on (certain?) HP laptops.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
FYI, there's a post-rc1 build regression with certain configs:
drivers/built-in.o: In function `pci_hp_deregister':
(.text+0xb166): undefined reference to `pci_hp_remove_module_link'
drivers/built-in.o: In function `pci_hp_deregister':
(.text+0xb19f): undefined reference to `pci_destroy_slot'
drivers/built-in.o: In function `__pci_hp_register':
(.text+0xb583): undefined reference to `pci_create_slot'
drivers/built-in.o: In function `__pci_hp_register':
(.text+0xb5b1): undefined reference to `pci_hp_create_module_link'
make: *** [.tmp_vmlinux1] Error 1
Caused by:
| 2b121bc262 is first bad commit
| commit 2b121bc262
| Date: Thu Jun 25 13:25:36 2009 +0200
|
| eeepc-laptop: Register as a pci-hotplug device
which changed the driver to use the PCI hotplug infrastructure, but
didn't do a good job on the Kconfig rules.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CMSG is an ACPI method used to find features available on
an Eee PC. But some features are never repported, even if present.
If the getter of a feature is present, this patch will set
the corresponding bit in cmsg.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
If there is there is no getter defined, get_acpi()
will return -ENODEV.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Refactor rfkill code, because we'll add another
rfkill for wwan3g later.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Convert the unusual printk(EEEPC_<level> uses to
the more standard pr_fmt and pr_<level>(.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The eee contains a logically (but not physically) hotpluggable PCIe slot.
Currently this is handled by adding or removing the PCI device in response
to rfkill events, but if a user has forced pciehp to bind to it (with the
force=1 argument) then both drivers will try to handle the event and
hilarity (in the form of oopses) will ensue. This can be avoided by having
eee-laptop register the slot as a hotplug slot. Only one of pciehp and
eee-laptop will successfully register this, avoiding the problem.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Tested-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Convert the unusual printk(ASUS_<level> uses to
the more standard pr_fmt and pr_<level>(.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
