Here, If devm_ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference. This error check
will avoid NULL pointer dereference.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
stih416 chip family is no more supported in Linux v4.9.
It is then useless to keep sti_vtac.c file since it not used at all for
the stih407/10 chip family supported by sti driver.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
This update allows to have a clearer fps log trace by adding information
about plane size and plane pixel format.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Do not process update requests with unmodified parameters.
Since the HQVDP command queue is limited to 2, we shall take care of
not posting unneeded commands, which would abusively fill the command
queue leading to frame update skip.
This typically happens when the driver is called with legacy
(non-atomic) IOCTL : in that case atomic_update() is called multiple
times with the same parameters.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
When a plane is enabled, after having been disabled, do not reload XP70
firmware again, but only register VTG again
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
This fix allows to play audio while HDMI is disconnected.
When HDMI is disable, audio configuration is stored and samples
are dropped (by HDMI IP).
When HDMI is enabled, audio HDMI configuration is applied and samples
are outputted on HDMI wire.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Some SoC without MMU have display driver where a drm/kms driver
could be implemented.
Before doing such kind of thing drm/kms must allow to use mmuless devices.
This patch propose to remove MMU configuration flag and add a cma helper
function to help implementing mmuless display driver
version 4:
- add documentation about drm_gem_cma_get_unmapped_area()
- stub it MMU case
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
[danvet: Use recommended struct member references in kernel-doc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483521177-21794-4-git-send-email-benjamin.gaignard@linaro.org
drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU.
Use a new DRM_VM to define when drm_vm.c in needed.
stub drm_legacy_vma_flush() to avoid compilation issues
version 4:
- a "config DRM_VM" in Kconfig
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
[danvet: Fix conflict.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we skip before banning, we have an inconsistent interface between
execbuf still queueing valid request but those requests already queued
being cancelled. If we only cancel the pending requests once we stop
accepting new requests, the user interface is more consistent.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105170059.344-1-chris@chris-wilson.co.uk
Now that we have split out a header file for simple macros (that maybe
we can promote into a core header), move a few macros across from
i915_drv.h
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105164148.26875-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Missed when rebasing patches, I failed to set ret to zero before
starting the unbind loop (which depends upon ret being zero).
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Fixes: 9332f3b1b9 ("drm/i915: Combine loops within i915_gem_evict_something")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105155940.10033-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v4.9+
The GuC uses a special mapping for the upper end of the Global GTT,
similar to the way it uses a special mapping for the lower end, so
exclude it from our drm_mm to prevent us using it.
v2: Rename to reflect that it is unmappable similar to the region at the
bottom of the GGTT, and couple it into the assertion that we don't feed
unmappable addresses to the GuC.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-5-chris@chris-wilson.co.uk
In order to defeat some circular dependencies between headers to allow use
of e.g. range_overflows() in a header, move the simple independent macros
into their own header.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-4-chris@chris-wilson.co.uk
Empirically we restart following a GPU reset more successfully if we call
lrc_init_hws() (which contains a posting read) last. (The failure mode
that was observed was that breadcrumb writes into the HWS from the
recovered requests went astray leading to the context-switch maintaining
forward progress, but the requests not being retired/completed.)
For clarity, lrc_init_hws() is inlined (and the unused function then
removed).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170105153023.30575-3-chris@chris-wilson.co.uk
Don't return from the open() call on the crc/data file until the HW has
produced a first frame, as there's great variability in when the HW is
able to do that and userspace shouldn't have to guess when this specific
HW is ready to start giving frame CRCs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102125912.22305-3-tomeu.vizoso@collabora.com
There's no reason any more for callers of this function to take the lock
themselves, so just move the lock to the function to avoid confusion and
bugs when more callers are contributed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102125912.22305-2-tomeu.vizoso@collabora.com
This reverts commit a5ad0fd852.
It results in kconfing complaining about recursive depencies:
drivers/usb/Kconfig:39:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/input/mouse/Kconfig:187: symbol MOUSE_APPLETOUCH depends on INPUT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/input/Kconfig:8: symbol INPUT is selected by VT
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/tty/Kconfig:12: symbol VT is selected by FB_STI
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:678: symbol FB_STI depends on FB
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:72: symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/Kconfig:128: symbol DRM_KMS_CMA_HELPER is selected by DRM_HDLCD
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/arm/Kconfig:6: symbol DRM_HDLCD depends on COMMON_CLK
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by X86_INTEL_QUARK
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
arch/x86/Kconfig:554: symbol X86_INTEL_QUARK depends on X86_PLATFORM_DEVICES
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/platform/x86/Kconfig:5: symbol X86_PLATFORM_DEVICES is selected by DRM_NOUVEAU
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/gpu/drm/nouveau/Kconfig:1: symbol DRM_NOUVEAU depends on LEDS_CLASS
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/leds/Kconfig:16: symbol LEDS_CLASS is selected by ATH9K_HTC
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
drivers/net/wireless/ath/ath9k/Kconfig:158: symbol ATH9K_HTC depends on USB
warning: (DRM_NOUVEAU && DRM_I915 && DRM_GMA500) selects ACPI_VIDEO which has unmet direct dependencies (ACPI && X86 &&
+BACKLIGHT_CLASS_DEVICE && INPUT)
And there's apparently a better patch available already.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The fence registers are clobbered by a GPU reset. If there is concurrent
user access to a fenced region via a GTT mmaping, the access will not be
fenced during the reset (until we restore the fences afterwards). In order
to prevent invalid access during the reset, before we clobber the fences
first we must invalidate the GTT mmapings. Access to the mmap will then
be forced to fault in the page, and in handling the fault, i915_gem_fault()
will take the struct_mutex and wait upon the reset to complete.
v2: Fix up commentary.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99274
Testcase: igt/gem_mmap_gtt/hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104145110.1486-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Gen9+ platforms have been seeing a lot of screen flickerings and
underruns, so I never felt comfortable in enabling FBC on these
platforms since I didn't want to throw yet another feature on top of
the already complex problem. We now have code that automatically
disables FBC if we ever get an underrun, and the screen flickerings
seem to be mostly gone, so it may be a good time to try to finally
enable FBC by default on the newer platforms.
Besides, BDW FBC has been working fine over the year, which gives me a
little more confidence now.
For a little more information, please refer to commit a98ee79317
("drm/i915/fbc: enable FBC by default on HSW and BDW").
v2: Enable not only on SKL, but for everything new (Daniel).
v3: Rebase after the intel_sanitize_fbc_option() change.
v4: New rebase after 8 months, drop expired R-B tags.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482495839-27041-1-git-send-email-paulo.r.zanoni@intel.com
Back in 2014, commit fb7023e0e2 ("drm/i915: BDW: Adding Reserved PCI
IDs.") added the reserved PCI IDs in order to try to make sure we had
working drivers in case we ever released products using these IDs
(since we had instances of this type of problem in the past). The
problem is that the patch only touched the macros used by
early-quirks.c and by the user space components that rely on
i915_pciids.h, it didn't touch the macros used by i915_pci.c. So we
correctly handled the stolen memory for these theoretical IDs, but we
didn't actually drive the devices from i915.ko.
So this patch fixes the original commit by actually making i915.ko
drive these IDs, which was the goal. There's no information on what
would be the GT count on these IDs, so we just go with the safer
intel_broadwell_info, at the risk of ignoring a possibly inexistent
BSD2_RING.
I did some checking, and it seems that these IDs are driven by
intel-gpu-tools, xf86-video-intel and libdrm (since they contain old
copies of i915_pciids.h), but they are not checked by mesa.
The alternative to this patch would be to just assume we're actually
never going to use these IDs, and then remove them from our ID lists
and make sure our user space components sync the latest i915_pciids.h
copy. I'm fine with either approaches, as long as we make sure that
every component tries to drive the same list of PCI IDs.
Fixes: fb7023e0e2 ("drm/i915: BDW: Adding Reserved PCI IDs.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-3-git-send-email-paulo.r.zanoni@intel.com
Commit 0853695c3b ("drm: Add reference counting to drm_atomic_state")
adds reference counting to atomic state, but didn't update the comments
in drm_atomic_(nonblocking_)commit. Clarify lifetime a bit more.
Fixes: 0853695c3b ("drm: Add reference counting to drm_atomic_state")
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/7acd1c78-ea86-7776-d98d-c846186e4b88@linux.intel.com
Add module alias for Sony ACX565AKM LCD panel. This makes it probe on Nokia
N900 when panel driver is built as a module.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
dsi.c compile fails if PRINT_VERBOSE_VM_TIMINGS is enabled, as the
video timings were not converted in the code behind that ifdef. Note
that PRINT_VERBOSE_VM_TIMINGS has to be enabled by hand, there's no
config option for it.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tomi.valkeinen@ti.com: fixed the patch description]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This commit fixes the VDAC disabling register write values.
Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
When the HDMI output is configured by the bootloader, there is mismatch is the
pipeline configuration and the Vsync interrupt fails to trigger.
This commit disables the HDMI blocks in the probe phase.
Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Directly merge drm-misc into drm-intel since Dave is on vacation and
we need the various drm-misc patches (fb format rework, drm mm fixes,
selftest framework and others). Also pulled back -rc2 in first to
resync with drm-intel-fixes and make sure I can reuse the exact rerere
solutions from drm-tip for safety, and because I'm lazy.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYaYNlAAoJEHm+PkMAQRiGtCUH/18PMUJpHqRKjxL3Yscw+QZC
RmGlD/hwBRLUSgiTCfURNGKP4QZv2kQW7BGsGC72oL01lmxozsU72ixUIO+wXzDY
K2b0OOKGZZWzFtaVm7Qs+5JhHAEKZcT046mLD8sjJuqkrFAhmNLKdwHjihKBEkm9
J3s2tpdXdN0x/Uyga/GY9khEYIrvLPeBoKSz+JXcQKdC0iq3/+PMpWnN47QCNScr
7azojkJkj/rs2cqVdOi7Wbh6PSqIvPsl8E3qJefpaVJF/IQaU1pFdy5g8kYm4V7T
fr6HgIbuN4EQWdN/5cgKrUdpQyV7D8iYx02klk4R8WgfS0QMYoUcsg+XsTd02TI=
=OhGe
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc2' into drm-intel-next-queued
Backmerge Linux 4.10-rc2 to resync with our -fixes cherry-picks. I've
done the backmerge directly because Dave is on vacation.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
When writing the generic nonblocking commit code I assumed that
through clever lifetime management I can assure that the completion
(stored in drm_crtc_commit) only gets freed after it is completed. And
that worked.
I also wanted to make nonblocking helpers resilient against driver
bugs, by having timeouts everywhere. And that worked too.
Unfortunately taking boths things together results in oopses :( Well,
at least sometimes: What seems to happen is that the drm event hangs
around forever stuck in limbo land. The nonblocking helpers eventually
time out, move on and release it. Now the bug I tested all this
against is drivers that just entirely fail to deliver the vblank
events like they should, and in those cases the event is simply
leaked. But what seems to happen, at least sometimes, on i915 is that
the event is set up correctly, but somohow the vblank fails to fire in
time. Which means the event isn't leaked, it's still there waiting for
eventually a vblank to fire. That tends to happen when re-enabling the
pipe, and then the trap springs and the kernel oopses.
The correct fix here is simply to refcount the crtc commit to make
sure that the event sticks around even for drivers which only
sometimes fail to deliver vblanks for some arbitrary reasons. Since
crtc commits are already refcounted that's easy to do.
References: https://bugs.freedesktop.org/show_bug.cgi?id=96781
Cc: Jim Rees <rees@umich.edu>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161221102331.31033-1-daniel.vetter@ffwll.ch
The code was moved, but the comment not updated. It confused me.
Fixes: 7f4c62840c ("drm/i915: Assign hwmode after encoder state readout")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219082423.27798-6-daniel.vetter@ffwll.ch
Fix build errors in nouveau driver when CONFIG_LEDS_CLASS=m and
CONFIG_DRM_NOUVEAU=y.
If LEDS_CLASS is enabled, DRM_NOUVEAU is restricted to the same
kconfig value as LEDS_CLASS.
drivers/built-in.o: In function `nouveau_do_suspend':
nouveau_drm.c:(.text+0x2030b1): undefined reference to `nouveau_led_suspend'
drivers/built-in.o: In function `nouveau_do_resume':
nouveau_drm.c:(.text+0x2034ca): undefined reference to `nouveau_led_resume'
drivers/built-in.o: In function `nouveau_drm_unload':
nouveau_drm.c:(.text+0x203a15): undefined reference to `nouveau_led_fini'
drivers/built-in.o: In function `nouveau_drm_load':
nouveau_drm.c:(.text+0x204423): undefined reference to `nouveau_led_init'
BTW, this line in Kbuild:
nouveau-$(CONFIG_LEDS_CLASS) += nouveau_led.o
does nothing when CONFIG_LEDS_CLASS=m and CONFIG_DRM_NOUVEAU=y.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/029a1ec5-48ac-a3ce-3106-430e0f2584bb@infradead.org
Revision 2 of LCDC suffers from an issue where a SYNC_LOST error
caused by limited memory bandwidth may leave the picture shifted a
couple pixels to the right.
This issue has not been observed on revision 1, while the recovery
mechanism introduces a different issue, where the END_OF_FRAME
interrupt doesn't fire while drm is waiting for vblanks.
On rev1: recover from sync lost errors by simply clearing the
RASTER_ENABLE bit in the RASTER_CTRL register and re-enabling it
again as is suggested by the datasheet.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
After commit 1c74eeaf16 ("drm/i915: Move number of scalers initialization to
runtime init"), scalers are not initialized properly for skl and glk
since num_scalers is left as 0 for those platforms.
Fixes: 1c74eeaf16 ("drm/i915: Move number of scalers initialization to runtime init")
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483365281-10569-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Ville explained that the wakelock was being acquired during set-idle in
order to flush the voltage change from the punit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170102152845.32352-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This function is only used by intel_guc_send() and it doesn't
need to be exposed outside of intel_uc.o file. Also when defined
as static, compiler will generate smaller code. Additionally let
it take guc param instead dev_priv to match function name.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220115531.76120-1-michal.wajdeczko@intel.com
As the fence may be signaled concurrently from an interrupt on another
device, it is possible for the list of requests on the timeline to be
modified as we walk it. Take both (the context's timeline and the global
timeline) locks to prevent such modifications.
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-10-chris@chris-wilson.co.uk
(cherry picked from commit 00c25e3f40)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As trimming the sg table is merely an optimisation that gracefully fails
if we cannot allocate a new table, we do not need to report the failure
either.
Fixes: 0c40ce130e ("drm/i915: Trim the object sg table")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-4-chris@chris-wilson.co.uk
(cherry picked from commit 8bfc478fa4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When we teardown the backing storage for the phys object, we copy from
the coherent contiguous block back to the shmemfs object, clflushing as
we go. Trying to clflush the invalid sg beforehand just oops and would
be redundant (due to it already being coherent, and clflushed
afterwards).
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-3-chris@chris-wilson.co.uk
(cherry picked from commit e5facdf964)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The vma will be NULL if the overlay was previously off, so
dereferencing it will oops. Check for NULL before doing that.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 9b3b7841b8 ("drm/i915/overlay: Use VMA as the primary tracker for images")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481131693-27993-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 4a15cdbbc5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The i915_gem_active stuff doesn't like a NULL ->retire hook, but
the overlay code can set it to NULL. That obviously ends up oopsing.
Fix it by introducing a new helper to assign the retirement callback
that will switch out the NULL function pointer with
i915_gem_retire_noop.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 0d9bdd886f ("drm/i915: Convert intel_overlay to request tracking")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207175647.10018-1-chris@chris-wilson.co.uk
(cherry picked from commit ecd9caa052)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Trying to determine the pixel rate of the pipe can't be done until we
know the clock, which means it can't be done until the encoder
.get_config() hooks have been called. So let's move the min_pixclk[]
stuff to the end of intel_modeset_readout_hw_state() when we actually
have gathered all the required infromation.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Fixes: 565602d750 ("drm/i915: Do not acquire crtc state to check clock during modeset, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220153902.15621-1-ville.syrjala@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit aca1ebf491)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Apparently some VLV BIOSen like to leave the VDD force bit enabled
even for power seqeuncers that aren't properly hooked up to any
port. That will result in a imbalance in the AUX power domain
refcount when we stat to use said power sequencer as edp_panel_vdd_on()
will not grab the power domain reference if it sees that the VDD is
already on.
To fix this let's make sure we turn off the VDD force bit when we
initialize the power sequencer registers. That is, unless it's
being done from the init path since there we are actually
initializing the registers for the current power sequencer and
we don't want to turn VDD off needlessly as that would require
waiting for the power cycle delay before we turn it back on.
This fixes the following kind of warnings:
WARNING: CPU: 0 PID: 123 at ../drivers/gpu/drm/i915/intel_runtime_pm.c:1455 intel_display_power_put+0x13a/0x170 [i915]()
WARN_ON(!power_domains->domain_use_count[domain])
...
v2: Fix typos in comment (David)
Cc: stable@vger.kernel.org
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98695
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220165117.24801-1-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
(cherry picked from commit 5d5ab2d26f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When no CRTC is associated with the plane, the meson_plane_atomic_check()
call breaks the kernel with an Oops.
Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
In future patches, we require greater flexibility in describing
the number of scalers available on each CRTC. To ease that transition
we move the current assignment to intel_device_info.
Scaler structure initialisation is done if scaler is available on the CRTC.
Gen9 check is not required as on depending upon numbers of scalers we
initialize scalers or return without doing anything in skl_init_scalers.
v3: Changed skl_init_scaler to intel_crtc_init_scalers
v2: Added Chris's comments.
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480398794-22741-1-git-send-email-nabendu.bikash.maiti@intel.com
The function intel_atomic_get_shared_dpll_state() is only called from
intel_dpll_mgr.c and it concerns the same data structures as the other
functions in that file, so move it there and make it static.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-8-git-send-email-ander.conselvan.de.oliveira@intel.com
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
[danvet: Remove spurious hunk that Archit spotted.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-13-git-send-email-daniel.vetter@ffwll.ch
The read of the page pin count and the bind count are unordered,
presenting races in the assert and it firing off incorrectly. Prevent
this by restricting the assert to the vma bind/unbind routines where we
have local cpu ordering between the two.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161231112012.29263-1-chris@chris-wilson.co.uk
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
v2: Review from Laurent:
- Move misplaced doc change to the right patch.
- Remove "DRM driver's", it's redundant.
- Spotted 3 more places where where we could add prose reference with
a real one.
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-14-git-send-email-daniel.vetter@ffwll.ch
If we store the fb funcs pointer, we can remove a bit of boilerplate.
Also remove the _fbdev_ in the example code, since the fb_funcs->dirty
callback has nothing to do with fbdev. It's a KMS feature, only
used by the fbdev deferred_io support to implement flushing/upload.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Move the misplaced kerneldoc change from a later patch to
this one here.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-11-git-send-email-daniel.vetter@ffwll.ch
I reported the include issue for tracepoints a while ago, but nothing
seems to have happened. Now it bit us, since the drm_mm_print
conversion was broken for armada. Fix it, so I can re-enable armada
in the drm-misc build configs.
v2: Rebase just the compile fix on top of Chris' build fix.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483115932-19584-1-git-send-email-daniel.vetter@ffwll.ch
Abstract access to mdev_device so that we can define which interfaces
are public rather than relying on comments in the structure.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jike Song <jike.song@intel.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Rather than hoping for good behavior by marking some elements
internal, enforce it by making the entire structure private and
creating an accessor function for the one useful external field.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Jike Song <jike.song@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Add an mdev_ prefix so we're not poluting the namespace so much.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Jike Song <jike.song@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
For a virtual device, drm_device.dev is NULL, so becareful not to
dereference it unconditionally in core code such as drm_dev_register().
Fixes: 75f6dfe3e6 ("drm: Deduplicate driver initialization message")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161230141639.10487-1-chris@chris-wilson.co.uk
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i
Originally I wasnt a friend of this style because I thought a
line-break between the "&struct" and "foo" part would break it. But a
quick test shows that " * &struct \n * foo\n" works pefectly well with
current kernel-doc. So time to mass-apply these changes!
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
Added some boilerplate for the structs, documented members where they
are relevant and plenty of markup for hyperlinks all over. And a few
small wording polish.
Note that the intro needs some more love after the DRM_MM_INSERT_*
patch from Chris has landed.
v2: Spelling fixes (Chris).
v3: Use &struct foo instead of &foo structure (Chris).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-3-git-send-email-daniel.vetter@ffwll.ch
ttm_global_reference was renamed to drm_global_reference. This updates
the documentation to reflect that. While we are there, document the
drm_global_reference API and update the initialization interface
documentation.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
[danvet: Keep the warning, ttm docs are still massively inadequate.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161228143216.26821-7-krisman@collabora.co.uk
Several DRM drivers print the same initialization message right after
drm_dev_register, so move that to common code. The exception is i915,
which uses its own register handle, so let it keep its own message.
Notice that this was tested only with Exynos, but looks simple enough
for the other drivers.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161228143216.26821-2-krisman@collabora.co.uk
Currently at the end of drm_core_init() we print
[ 0.735185] [drm] Initialized
which does not provide any user information and is only a breadcrumb for
developers, so reduce it from info to debug.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161229133729.32673-1-chris@chris-wilson.co.uk
Including all drivers. I thought about keeping small compat functions
to avoid having to change all drivers. But I really like the
drm_printer idea, so figured spreading it more widely is a good thing.
v2: Review from Chris:
- Natural argument order and better name for drm_mm_print.
- show_mm() macro in the selftest.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483009764-8281-1-git-send-email-daniel.vetter@ffwll.ch
Remove the IS_PLATFORM() macros from intel_dump_pipe_config() and split
that logic in platform specific implementations inside the dpll code,
accessed through a platform independent interface.
v2: Rebase.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-7-git-send-email-ander.conselvan.de.oliveira@intel.com
The documentation for most of the non-static members and structs were
missing. Fix that.
v2: Fix typos (Durga)
v3: Rebase.
Fix make docs warnings.
Document more.
v4: capitilize CRTC; say that the prepare hook is a nop if the DPLL is
already enabled; link to struct intel_dpll_hw_state from @hw_state
field in struct intel_shared_dpll_state; reorganize DPLL flags; link
intel_shared_dpll_state to other structs and functions. (Daniel)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-6-git-send-email-ander.conselvan.de.oliveira@intel.com
The function intel_shared_dpll_commit() performs the equivalent of
drm_atomic_helper_swap_state() for the shared dpll state, which is not
handled by the helpers. So make it do a full swap of the state and
rename it for consistency.
v2: Fix typo in the commit message. (Durga)
v3: Rebase.
v4: Swap the states instead of just renaming the function. (Daniel)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com> (v2)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v3)
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-3-git-send-email-ander.conselvan.de.oliveira@intel.com
While the details of getting a shared dpll are wrapped by
intel_get_shared_dpll(), the release was still hand rolled into the
modeset code. Fix that by creating an entry point for releasing the
pll and move that code there.
v2: Take old_dpll from crtc->state instead of crtc_state. (CI)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-2-git-send-email-ander.conselvan.de.oliveira@intel.com
For every submission buffer object one of MSM_SUBMIT_BO_WRITE
and MSM_SUBMIT_BO_READ must be set (and nothing else). If we
allowed zero then the buffer object would never get queued to
be unreferenced.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The error cases in submit_reloc() need to put back the virtual
address of the bo before failling. Add a single failure path
for the function.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currently the value written to CP_RB_WPTR is calculated on the fly as
(rb->next - rb->start). But as the code is designed rb->next is wrapped
before writing the commands so if a series of commands happened to
fit perfectly in the ringbuffer, rb->next would end up being equal to
rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR.
The easiest way to fix this is to mask WPTR when writing it to the
hardware; it makes the hardware happy and the rest of the ringbuffer
math appears to work and there isn't any point in upsetting anything.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[squash in is_power_of_2() check]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Drivers need to take care. Motivated by a discussion between Mark and
Rob on dri-devel.
Cc: Mark yao <mark.yao@rock-chips.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: s/alloc|freeing/modifications/ per Chris' suggestion.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482833457-29592-1-git-send-email-daniel.vetter@ffwll.ch
Remove a superfluous helper as drm_mm_insert_node is equivalent to
insert_node_in_range with a range of [0, U64_MAX].
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-37-chris@chris-wilson.co.uk
mm->color_adjust() compares the hole with its neighbouring nodes. They
only abutt before we restrict the hole, so we have to apply color_adjust
before we apply the range restriction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-36-chris@chris-wilson.co.uk
Insulate users from changes to the internal hole tracking within
struct drm_mm_node by using an accessor for hole_follows.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: resolve conflicts in i915_vma.c]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Using mm->color_adjust makes the eviction scanner much tricker since we
don't know the actual neighbours of the target hole until after it is
created (after scanning is complete). To work out whether we need to
evict the neighbours because they impact upon the hole, we have to then
check the hole afterwards - requiring an extra step in the user of the
eviction scanner when they apply color_adjust.
v2: Massage kerneldoc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-34-chris@chris-wilson.co.uk
Since we mandate a strict reverse-order of drm_mm_scan_remove_block()
after drm_mm_scan_add_block() we can further simplify the list
manipulations when generating the temporary scan-hole.
v2: Highlight the games being played with the lists to track the scan
holes without allocation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-33-chris@chris-wilson.co.uk
Add an assertion to the plain i915_ggtt_offset() to double check that
any offset we hand to the GuC is outside of its unmappable ranges.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161224193146.4402-1-chris@chris-wilson.co.uk
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
For power-of-two alignments, we can avoid the 64bit divide and do a
simple bitwise add instead.
v2: s/alignment_mask/remainder_mask/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-32-chris@chris-wilson.co.uk
Compute the minimal required hole during scan and only evict those nodes
that overlap. This enables us to reduce the number of nodes we need to
evict to the bare minimum.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-31-chris@chris-wilson.co.uk
The range restriction should be applied after the color adjustment, or
else we may inadvertently apply the color adjustment to the restricted
hole (and not against its neighbours).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-30-chris@chris-wilson.co.uk
Doing the check is trivial (low cost in comparison to overall eviction)
and helps simplify the code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-29-chris@chris-wilson.co.uk
Acknowledging that we were building up the hole was more useful to me
when reading the code, than knowing the relationship between this node
and the previous node.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-28-chris@chris-wilson.co.uk
Kbuild really doesn't like non-recursive Makefiles, but they do work
as long as you build without O=
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 50f0033d1a ("drm: Add some kselftests for the DRM range manager (struct drm_mm)")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482918077-30027-1-git-send-email-daniel.vetter@ffwll.ch
The scan state occupies a large proportion of the struct drm_mm and is
rarely used and only contains temporary state. That makes it suitable to
moving to its struct and onto the stack of the callers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: Fix up etnaviv to compile, was missing a BUG_ON.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A simple assert to ensure that we don't overflow start + size when
initialising the drm_mm, or its scanner.
In future, we may want to switch to tracking the value of ranges (rather
than size) so that we can cover the full u64, for example like resource
tracking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-26-chris@chris-wilson.co.uk
Since commit ea7b1dd448 ("drm: mm: track free areas implicitly"),
to test whether there are any nodes allocated within the range manager,
we merely have to ask whether the node_list is empty.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-25-chris@chris-wilson.co.uk
Protect ourselves from a caller passing in node.start + node.size that
will overflow and trick us into reserving that node.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-24-chris@chris-wilson.co.uk
The nodes must be removed in the *reverse* order. This is correct in the
overview, but backwards in the function description. Whilst here add
Intel's copyright statement and tweak some formatting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-23-chris@chris-wilson.co.uk
In places (e.g. i915.ko), the alignment is exported to userspace as u64
and there now exists hardware for which we can indeed utilize a u64
alignment. As such, we need to keep 64bit integers throughout when
handling alignment.
Testcase: igt/drm_mm/align64
Testcase: igt/gem_exec_alignment
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-22-chris@chris-wilson.co.uk
Check that after applying the driver's color adjustment, restricted
eviction scanning finds a suitable hole.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-20-chris@chris-wilson.co.uk
Check that after applying the driver's color adjustment, eviction
scanning finds a suitable hole.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-19-chris@chris-wilson.co.uk
Check that after applying the driver's color adjustment, fitting of the
node and its alignment are still correct.
v2: s/no_color_touching/separate_adjacent_colors/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-18-chris@chris-wilson.co.uk
Check that if we request top-down allocation from drm_mm_insert_node()
we receive the next available hole from the top.
v2: Flip sign on conditional assert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-17-chris@chris-wilson.co.uk
Check that we add arbitrary blocks to a restrited eviction scanner in
order to find the first minimal hole that matches our request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-16-chris@chris-wilson.co.uk
Check that we add arbitrary blocks to the eviction scanner in order to
find the first minimal hole that matches our request.
v2: Refactor out some common eviction code for later
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-15-chris@chris-wilson.co.uk
Check that we can request alignment to any power-of-two or prime using a
plain drm_mm_node_insert(), and also handle a reasonable selection of
primes.
v2: Exercise all allocation flags
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-14-chris@chris-wilson.co.uk
Exercise drm_mm_insert_node_in_range(), check that we only allocate from
the specified range.
v2: Use all allocation flags
v3: Don't pass in invalid ranges - these will be asserted later.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-13-chris@chris-wilson.co.uk
Reuse drm_mm_insert_node() with a temporary node to exercise
drm_mm_replace_node(). We use the previous test in order to exercise the
various lists following replacement.
v2: Check that we copy across the important (user) details of the node.
The internal details (such as lists and hole tracking) we hope to detect
errors by exercise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-12-chris@chris-wilson.co.uk
Exercise drm_mm_insert_node(), check that we can't overfill a range and
that the lists are correct after reserving/removing.
v2: Extract helpers for the repeated tests
v3: Iterate over all allocation flags
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-11-chris@chris-wilson.co.uk
Exercise drm_mm_reserve_node(), check that we can't reserve an already
occupied range and that the lists are correct after reserving/removing.
v2: Check for invalid node reservation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-10-chris@chris-wilson.co.uk
First we introduce a smattering of infrastructure for writing selftests.
The idea is that we have a test module that exercises a particular
portion of the exported API, and that module provides a set of tests
that can either be run as an ensemble via kselftest or individually via
an igt harness (in this case igt/drm_mm). To accommodate selecting
individual tests, we export a boolean parameter to control selection of
each test - that is hidden inside a bunch of reusable boilerplate macros
to keep writing the tests simple.
v2: Choose a random random_seed unless one is specified by the user.
v3: More parameters to control max_iterations and max_prime of the
tests.
Testcase: igt/drm_mm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-7-chris@chris-wilson.co.uk
When testing, we want a random but yet reproducible order in which to
process elements. Here we create an array which is a random (using the
Tausworthe PRNG) permutation of the order in which to execute.
Note these are simple helpers intended to be merged upstream in lib/
v2: Tidier code by David Herrmann
v3: Add reminder that this code is intended to be temporary, with at
least the bulk of the prandom changes going to lib/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-6-chris@chris-wilson.co.uk
Fairly commonly we want to inspect the node list on the struct drm_mm,
which is buried within an embedded node. Bring it to the surface with a
bit of syntatic sugar.
Note this was intended to be split from commit ad579002c8 ("drm: Add
drm_mm_for_each_node_safe()") before being applied, but my timing sucks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-3-chris@chris-wilson.co.uk
i915 does not set DRIVER_ATOMIC by default yet but uses atomic_check and
atomic_commit. drm_object_property_get_value() does not read the correct
value of atomic properties if DRIVER_ATOMIC is not set. Checking whether
the driver uses atomic modeset is a better check instead as the property
values are tracked in the state structures.
v2: Included header
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482396643-32456-2-git-send-email-dhinakaran.pandiyan@intel.com
This check is useful for drivers that do not have DRIVER_ATOMIC set but
have atomic modesetting internally implemented. Wrap the check into a
function since this is used in many places and as a bonus, the function
name helps to document what the check is for.
v2:
Change return type to bool (Ville)
Move the function drm_atomic.h (Daniel)
Fixed comment marker for documentation
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[danvet: Move back to drmP.h because include hell.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482396643-32456-1-git-send-email-dhinakaran.pandiyan@intel.com
PCI basic config space's size is 256 bytes. When check if access crosses
space range, should use "> 256".
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
There's an issue in current cfg space emulation for PCI_COMMAND (offset
0x4): when guest changes some bits other than PCI_COMMAND_MEMORY, this
write operation will not be written to virutal cfg space successfully.
This patch is to fix the wrong behavior above.
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The release action might be triggered from either user's closing
mdev or the detaching event of kvm and vfio_group, so this patch
introduces an atomic to prevent double-release.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
gfn_to_memslot() may return NULL if the gfn is mmio
or invalid. A malicious user might input a bad gfn
to panic the host if we don't check it.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Though there is no issue exposed yet, it's possible that another
thread releases the entry while our trying to deref it out of the
lock. Fit it by moving the dereference within lock.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The GGTT space is partitioned between vGPUs, it could be reused by
next vGPU after previous one is release, the stale entries need
point to scratch page when vGPU created.
v2: Reset logic move to vGPU create.
v3: Correct the commit msg.
v4: Move the reset function to vGPU init gtt function, as result it's no
need explicitly in vGPU reset logic as vGPU init gtt called during
reset.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It should be vgpu_opregion(vgpu)->va, not vgpu_opregion(vgpu).
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
The context has to obey the same offset requirements as the ring,
so we can re-use the same bias value we computed for the ring instead of
unconditionally using GUC_WOPCM_TOP.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1482537382-28584-2-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
GuC will validate the ring offset and fail if it is in the
[0, GUC_WOPCM_TOP) range. The bias is conditionally applied only
if GuC loading is enabled (we can't check for guc submission enabled as
in other cases because HuC loading requires this fix).
Note that the default context is processed before enable_guc_loading is
sanitized, so we might still apply the bias to its ring even if it is
not needed.
v2: compute the value during ctx init and pass it to
intel_ring_pin (Chris), updated commit message
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482537382-28584-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As the fence may be signaled concurrently from an interrupt on another
device, it is possible for the list of requests on the timeline to be
modified as we walk it. Take both (the context's timeline and the global
timeline) locks to prevent such modifications.
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-10-chris@chris-wilson.co.uk
When creating a partial VMA assert that it first fits with the parent
object, and that if it covers the whole of the parent a normal view was
created instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-5-chris@chris-wilson.co.uk
As trimming the sg table is merely an optimisation that gracefully fails
if we cannot allocate a new table, we do not need to report the failure
either.
Fixes: 0c40ce130e ("drm/i915: Trim the object sg table")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-4-chris@chris-wilson.co.uk
When we teardown the backing storage for the phys object, we copy from
the coherent contiguous block back to the shmemfs object, clflushing as
we go. Trying to clflush the invalid sg beforehand just oops and would
be redundant (due to it already being coherent, and clflushed
afterwards).
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-3-chris@chris-wilson.co.uk
The idle work handler is self-arming - if it detects that it needs to
run again it will queue itself from its work handler. Take greater care
when trying to drain the idle work, and double check that it is flushed.
The free worker has a similar issue where it is armed by an RCU task
which may be running concurrently with us.
This should hopefully help with the sporadic WARN_ON(dev_priv->gt.awake)
from i915_gem_suspend.
v2: Reuse drain_freed_objects.
v3: Don't try to flush the freed objects from the shrinker, as it may be
underneath the struct_mutex already.
v4: do while and comment upon the excess rcu_barrier in drain_freed_objects
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-2-chris@chris-wilson.co.uk
Since commit db6c2b4151 ("drm/i915: Store the vma in an rbtree under
the object") the vma are once again sorted into GGTT first, then ppGTT
so that the typical case of walking the GGTT vma can stop as soon as we
find a non-ppGTT. Apply that optimisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-1-chris@chris-wilson.co.uk
On enable intel_dsi_enable() directly calls intel_enable_dsi_pll(),
make intel_dsi_disable() also directly call intel_disable_dsi_pll(),
rather then hiding the call in intel_dsi_clear_device_ready(),
no functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201202925.12220-7-hdegoede@redhat.com
The upper bits of the vsync width, vsync offset and hsync width
were not parsed from the VBT. Parse these fields in this patch.
V2: Renamed lvds dvo timing structure members and code identation
fix (Jani's review comments)
V3: Corrected commit message, used "from the VBT"
Signed-off-by: Vincente Tsou <vincente.tsou@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482430993-3265-1-git-send-email-madhav.chauhan@intel.com
BSpec says:
"Overlay Clock Gating Must be Disabled: Overlay & L2 Cache clock gating
must be disabled in order to prevent device hangs when turning off overlay.SW
must turn off Ovrunit clock gating (6200h) and L2 Cache clock gating (C8h)."
We only turned off the overlay clock gating (due to lack of docs I
presume). After a bit of experimentation it looks like the the magic
C8h register lives in the PCI config space of device 0, and the magic
bit appears to be bit 2. Or at the very least this eliminates the GPU
death after MI_OVERLAY_OFF.
L2 clock gating seems to save ~80mW, so let's keep it on unless we need
to actually use the overlay.
Also let's move the OVRUNIT clock gating to the same place since we can,
and 845 supposedly doesn't need it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481131693-27993-11-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Do the overlay frontbuffer tracking properly so that it matches
the state of the overlay on/off/continue requests.
One slight problem is that intel_frontbuffer_flip_complete()
may get delayed by an arbitrarily liong time due to the fact that
the overlay code likes to bail out when a signal occurs. So the
flip may not get completed until the ioctl is restarted. But fixing
that would require bigger surgery, so I decided to ignore it for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481131693-27993-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
First set of i915 fixes for code in next.
* tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: skip the first 4k of stolen memory on everything >= gen8
drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping
drm/i915: Fix use after free in logical_render_ring_init
drm/i915: disable PSR by default on HSW/BDW
drm/i915: Fix setting of boost freq tunable
drm/i915: tune down the fast link training vs boot fail
drm/i915: Reorder phys backing storage release
drm/i915/gen9: Fix PCODE polling during SAGV disabling
drm/i915/gen9: Fix PCODE polling during CDCLK change notification
drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting
drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET
drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating
drm/i915: drop the struct_mutex when wedged or trying to reset
Here's the one lonely bugfix I talked about on irc.
* tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc:
drivers/gpu/drm/ast: Fix infinite loop if read fails
The i915_gem_active stuff doesn't like a NULL ->retire hook, but
the overlay code can set it to NULL. That obviously ends up oopsing.
Fix it by introducing a new helper to assign the retirement callback
that will switch out the NULL function pointer with
i915_gem_retire_noop.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 0d9bdd886f ("drm/i915: Convert intel_overlay to request tracking")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207175647.10018-1-chris@chris-wilson.co.uk
- fix display regression on DCE6/8
- Powergating fixes for GFX8
- amdgpu SI fixes (golden settings, proper rev id setup, etc.)
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amdgpu: update tile table for oland/hainan
drm/amdgpu: update tile table for verde
drm/amdgpu: update rev id for verde
drm/amdgpu: update golden setting for verde
drm/amdgpu: update rev id for oland
drm/amdgpu: update golden setting for oland
drm/amdgpu: update rev id for hainan
drm/amdgpu: update golden setting for hainan
drm/amdgpu: update rev id for pitcairn
drm/amdgpu: update golden setting for pitcairn
drm/amdgpu: update golden setting/tiling table of tahiti
drm/amdgpu: fix cursor setting of dce6/dce8
drm/amdgpu: refine set clock gating for tonga/polaris
drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11.
drm/amdgpu: add new gfx cg flags.
drm/amdgpu: fix pg can't be disabled by PG mask.
drm/amdgpu: always initialize gfx pg for gfx_v8.0.
drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney.
drm/amdgpu: fix init save/restore list in gfx_v8.0
drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0.
...
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng).
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=55TG
-----END PGP SIGNATURE-----
Merge tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Here are new versions of two ACPICA changes that were deferred
previously due to a problem they had introduced, two cleanups on top
of them and the removal of a useless warning message from the ACPI
core.
Specifics:
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng)
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui)"
* tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
ACPI: do not warn if _BQC does not exist
Trying to determine the pixel rate of the pipe can't be done until we
know the clock, which means it can't be done until the encoder
.get_config() hooks have been called. So let's move the min_pixclk[]
stuff to the end of intel_modeset_readout_hw_state() when we actually
have gathered all the required infromation.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Fixes: 565602d750 ("drm/i915: Do not acquire crtc state to check clock during modeset, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220153902.15621-1-ville.syrjala@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* acpica:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
* acpi-scan:
ACPI: do not warn if _BQC does not exist
Apparently some VLV BIOSen like to leave the VDD force bit enabled
even for power seqeuncers that aren't properly hooked up to any
port. That will result in a imbalance in the AUX power domain
refcount when we stat to use said power sequencer as edp_panel_vdd_on()
will not grab the power domain reference if it sees that the VDD is
already on.
To fix this let's make sure we turn off the VDD force bit when we
initialize the power sequencer registers. That is, unless it's
being done from the init path since there we are actually
initializing the registers for the current power sequencer and
we don't want to turn VDD off needlessly as that would require
waiting for the power cycle delay before we turn it back on.
This fixes the following kind of warnings:
WARNING: CPU: 0 PID: 123 at ../drivers/gpu/drm/i915/intel_runtime_pm.c:1455 intel_display_power_put+0x13a/0x170 [i915]()
WARN_ON(!power_domains->domain_use_count[domain])
...
v2: Fix typos in comment (David)
Cc: stable@vger.kernel.org
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98695
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220165117.24801-1-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
There is at least one APL based system using port A in DP mode
(connecting to an on-board DP->VGA adaptor). Atm we'll configure port A
unconditionally as eDP which is incorrect in this case. Fix this by
relying on the VBT DDI port 'internal port' flag instead on all ports on
DDI platforms. For now chicken out from using VBT for port A before
GEN9.
v2:
- Move the DDI port info lookup to intel_bios_is_port_edp() (David, Jani)
- Use the DDI port info on all DDI platforms starting from port B.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482315444-24750-1-git-send-email-imre.deak@intel.com
when num_pipes is zero, it indicates there is no display and HDMI
audio doesn't exist.
v2: Move the check from caller to callee for consistency.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Elaine Wang <elaine.wang@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482142746-21663-1-git-send-email-elaine.wang@intel.com
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This macro got useless after commit 8d9c20e1d1
"drm/i915: Remove .is_mobile field from platform struct"
that removed is_mobile split from VLV definition.
Also this was never reused on any following platform.
So let's clean up a bit here.
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482184508-18346-1-git-send-email-rodrigo.vivi@intel.com
BSpec got updated and this workaround is now listed as standard
required programming for all subsequent projects. This is confirmed to
fix Skylake screen flickering issues (probably caused by the fact that
we initialized a ring in the first page of stolen, but I didn't 100%
confirm this theory).
v2: this is the patch that fixes the screen flickering, document it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Cc: stable@vger.kernel.org
Tested-by: Dominik Klementowski <dominik232@gmail.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481727338-9901-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit d435376104)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we at first do not succeed with attempting to remap our physical
pages using a coalesced scattergather list, try again with one
scattergather entry per page. This should help with swiotlb as it uses a
limited buffer size and only searches for contiguous chunks within its
buffer aligned up to the next boundary - i.e. we may prematurely cause a
failure as we are unable to utilize the unused space between large
chunks and trigger an error such as:
i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes)
Reported-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Fixes: 871dfbd67d ("drm/i915: Allow compaction upto SWIOTLB max segment size")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit d766ef5300)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs
structure only for the enabled engines") introduced the
dynanically allocated engine instances and created an
potential use after free scenario in logical_render_ring_init
where lrc_destroy_wa_ctx_obj could be called after the engine
instance has been freed.
This can only happen during engine setup/init error handling
which luckily does not happen ever in practice.
Fix is to not call lrc_destroy_wa_ctx_obj since it would have
already been executed from the preceding engine cleanup.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481894322-2145-1-git-send-email-tvrtko.ursulin@linux.intel.com
(cherry picked from commit d038fc7e4f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For limiting the max frequency of gpu, the max freq tunable
is not enough to hard limit the max gap. We now have also per
client boost max freq. When this tunable was introduced,
it was mistakenly made read only. Allow user to gain control by
setting it writable.
Fixes: 29ecd78d3b ("drm/i915: Define a separate variable and control for RPS waitboost frequency")
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 73a7987113)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In commit a4f5ea64f0 ("drm/i915: Refactor object page API"), I
reordered the object->pages teardown to be more friendly wrt to a
separate obj->mm.lock. However, I overlooked the phys object and left it
with a dangling use-after-free of its phys_handle. Move the allocation
of the phys handle to get_pages and it release to put_pages to prevent
the invalid access and to improve symmetry.
v2: Add commentary about always aligning to page size.
Testcase: igt/drv_selftest/objects
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: a4f5ea64f0 ("drm/i915: Refactor object page API")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207133411.8028-1-chris@chris-wilson.co.uk
(cherry picked from commit dbb4351bab)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to the previous patch, it's possible atm that we call
intel_do_sagv_disable() only once during the 1ms period and time out if
that call fails. As opposed to this the spec says that we need to keep
retrying this request for a 1ms duration, so let's do this similarly to
the CDCLK change notification request.
v4-5:
- Rebased on the reply_mask, reply change.
v6:
- Remove w/s change. (Lyude)
- Rebased on the timeout_base argument change.
Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 656d1b89e5 ("drm/i915/skl: Add support for the SAGV, fix underrun hangs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com
(cherry picked from commit b3b8e99984)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit 848496e590
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Jul 13 16:32:03 2016 +0300
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
increased the timeout to match the spec, but we still see a timeout on
at least one SKL. A CDCLK change request following the failed one will
succeed nevertheless.
I could reproduce this problem easily by running kms_pipe_crc_basic in a
loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
the worst case - when the pre-emption happened right after calculating
timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
once which failed and so _wait_for() timed out. As opposed to this the
spec says to keep retrying the request for at most a 3ms period.
To fix this send the first request explicitly to guarantee that there is
3ms between the first and last request. Though this matches the spec, I
noticed that in rare cases this can still time out if we sent only a few
requests (in the worst case 2) _and_ PCODE is busy for some reason even
after a previous request and a 3ms delay. To work around this retry the
polling with pre-emption disabled to maximize the number of requests.
Also increase the timeout to 10ms to account for interrupts that could
reduce the number of requests. With this change I couldn't trigger
the problem.
v2:
- Use 1ms poll period instead of 10us. (Chris)
v3:
- Poll with pre-emption disabled to increase the number of request
attempts. (Ville, Chris)
- Factor out a helper to poll, it's also needed by the next patch.
v4:
- Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
reply is generic. (Ville)
v5:
- List the request specific timeout values as code comment. (Ville)
v6:
- Try the poll first with preemption enabled.
- Add code comment about first request being queued by PCODE. (Art)
- Add timeout_base_ms argument. (Ville)
v7:
- Clarify code comment about first queued request. (Chris)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms
Cc: <stable@vger.kernel.org> # v4.2-
Fixes: 5d96d8afcf ("drm/i915/skl: Deinit/init the display at suspend/resume")
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
(cherry picked from commit a0b8a1fe34)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio.
Fixes: a0a6d4ffd2 ("drm/i915/dsi: add support for gpio elements on CHV")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201202925.12220-3-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit b2b45fcd92)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Looking at the ADF code from the Android kernel sources for a
cherrytrail tablet I noticed that it is calling the
MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook.
Until commit b1cb1bd291 ("drm/i915/dsi: update reset and power sequences
in panel prepare/unprepare hooks") the mainline i915 code was doing the
same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET /
MIPI_SEQ_DEASSERT_RESET.
Looking at the naming of the sequences that is the right thing to do,
but the problem is, that the old mainline code and the ADF code was
actually calling the right sequence (tested on a cube iwork8 air tablet),
and the swapping of the calling breaks things.
This breakage was likely not noticed in testing because on cherrytrail,
currently chv_exec_gpio ends up disabling the gpio pins rather then
setting them (this is fixed in the next patch in this patch-set).
This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's
places in the enum defining them, so that their (new) names match their
actual use.
Changes in v2:
-Add a comment to the enum explaining that the assert/reassert names
are swapped in the spec
Fixes: b1cb1bd291 ("drm/i915/dsi: update reset and power sequences...")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 2b8208ac93)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.
The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.
Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.
This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.
Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and
comment
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 721d484563)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged
or a reset is in progress we bail early but never seem to actually
release the lock.
Fixes: 7f1847ebf4 ("drm/i915: Simplify checking of GPU reset_counter in display pageflips")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.7+
(cherry picked from commit ddbb271aea)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e411072d57)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Don't even tell the mm allocator to handle the first page of stolen on
the affected platforms. This means that we won't inherit the FB in
case the BIOS decides to put it at the start of stolen. But the BIOS
should not be putting it at the start of stolen since it's going to
get corrupted. I suppose the bug here is that some pixels at the very
top of the screen will be corrupted, so it's not exactly easy to
notice.
We have confirmation that the first page of stolen does actually get
corrupted, so I really think we should do this in order to avoid any
possible future headaches, even if that means losing BIOS framebuffer
inheritance. Let's not use the HW in a way it's not supposed to be
used.
Notice that now ggtt->stolen_usable_size won't reflect the ending
address of the stolen usable range anymore, so we have to fix the
places that rely on this. To simplify, we'll just use U64_MAX.
v2: don't even put the first page on the mm (Chris)
v3: drm_mm_init() takes size instead of end as argument (Ville)
v4: add a comment explaining the reserved ranges (Chris)
use 0 for start and U64_MAX for end when possible (Chris)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481808235-27607-1-git-send-email-paulo.r.zanoni@intel.com
BSpec got updated and this workaround is now listed as standard
required programming for all subsequent projects. This is confirmed to
fix Skylake screen flickering issues (probably caused by the fact that
we initialized a ring in the first page of stolen, but I didn't 100%
confirm this theory).
v2: this is the patch that fixes the screen flickering, document it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Cc: stable@vger.kernel.org
Tested-by: Dominik Klementowski <dominik232@gmail.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481727338-9901-1-git-send-email-paulo.r.zanoni@intel.com
In commit 0c40ce130e ("drm/i915: Trim the object sg table"), we expect
to copy exactly orig_st->nents across and allocate the table thusly.
The copy loop should therefore end with the new_sg being NULL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-2-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If we at first do not succeed with attempting to remap our physical
pages using a coalesced scattergather list, try again with one
scattergather entry per page. This should help with swiotlb as it uses a
limited buffer size and only searches for contiguous chunks within its
buffer aligned up to the next boundary - i.e. we may prematurely cause a
failure as we are unable to utilize the unused space between large
chunks and trigger an error such as:
i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes)
Reported-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Fixes: 871dfbd67d ("drm/i915: Allow compaction upto SWIOTLB max segment size")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 7c83d7abc9 ("drm/amdgpu: Only update the CUR_SIZE register when
necessary")
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let's take usage of IS_LP to simplify the gem stolen
initialization as suggest by Tvrtko.
Also assume that all new LP platforms follows the chv+
and others bdw+.
v2: Remove the wrong commit message about bxt and glk. (Ander)
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482174347-24911-1-git-send-email-rodrigo.vivi@intel.com
gen8 is used for both Broadwell and Cherryview but this
function here is only Cherryview and all next atom LP platforms.
So let's rename it to avoid confusion as suggested by Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482096988-400-2-git-send-email-rodrigo.vivi@intel.com
Valleyview/Baytrail (gen7_lp) and Cherryview/Braswell (gen8_lp)
are both Atom platforms like Broxton/Apollolake and Geminilake.
So let's expand this is_lp back to these platforms and
create the IS_LP(dev_priv) so we can start simplifying a bit
our if/else for platform lists.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482096988-400-1-git-send-email-rodrigo.vivi@intel.com
Do something similar to vc4, only allow updating the cursor state
in-place through a fastpath when the watermarks are unaffected. This
will allow cursor movement to be smooth, but changing cursor size or
showing/hiding cursor will still fall back so watermarks can be updated.
Only moving and changing fb is allowed.
Changes since v1:
- Set page flip to always_unused for trybot.
- Copy fence correctly, ignore plane_state->state, should be NULL.
- Check crtc_state for !active and modeset, go to slowpath if the case.
Changes since v2:
- Make error handling work correctly. (Matthew Auld)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/a8e4cb00-5171-14e5-bbe3-dadb654ff296@linux.intel.com
There's 2 reasons for doing a vblank wait:
- To fulfill uabi expectations, but the legacy ioctls are ill-defined
enough that we really only need this when we do send out an event.
- To make sure we don't tear down mappings before the scanout engine
stops accessing it.
The later is problematic with the current code since e.g. rotation
might need a different mapping than normal orientation. And rotation
is a plane property, and not on the fb. Hence we need to remove this
optimization.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Completely new commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-5-git-send-email-maarten.lankhorst@linux.intel.com
Stop relying on a per crtc_state last_vblank_count, we shouldn't touch
crtc_state after commit. Move it to atomic_state->crtcs.
Also stop re-using new_crtc_state->enable, we can now simply set a
bitmask with crtc_crtc_mask.
Changes since v1:
- Keep last_vblank_count in __drm_crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8e4759a4-24d3-3f80-bd1a-1e7a9c83b612@linux.intel.com
Atomic drivers may set properties like rotation on the same fb, which
may require a call to prepare_fb even when framebuffer stays identical.
Instead of handling all the special cases in the core, let the driver
decide when prepare_fb and cleanup_fb are noops.
This is a revert of:
commit fcc60b413d
Author: Keith Packard <keithp@keithp.com>
Date: Sat Jun 4 01:16:22 2016 -0700
drm: Don't prepare or cleanup unchanging frame buffers [v3]
The original commit mentions that this prevents waiting in i915 on all
previous rendering during cursor updates, but there are better ways to
fix this.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/6d82f9b6-9d16-91d1-d176-4a37b09afc44@linux.intel.com
VLV apparently gets upset if the PPS for a pipe currently driving an
external DP port gets used for VDD stuff on another eDP port. The DP
port falls over and fails to retrain when this happens, leaving the
user staring at a black screen.
Let's fix it by also tracking which pipe is driving which DP/eDP port.
We'll track this under intel_dp so that we'll share the protection
of the pps_mutex alongside the pps_pipe tracking, since the two
things are intimately related.
I had plans to reduce the protection of pps_mutex to cover only eDP
ports, but with this we can't do that. Well, for for VLV/CHV at least.
For other platforms it should still be possible, which would allow
AUX communication to occur in parallel for multiple DP ports.
v2: Drop stray crap from a comment (Imre)
Grab pps_mutex when clearing active_pipe
Fix a typo in the commit message
v3: Make vlv_active_pipe() static
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481738423-29738-1-git-send-email-ville.syrjala@linux.intel.com
The kref_put_mutex() returns with the mutex held after freeing the
object - so we must remember to drop it...
Fixes: 69df05e11a ("drm/i915: Simplify releasing context reference")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219101357.28140-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.
For consistency inline the .unload() handler in the remove function as
well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Calling drm_vblank_cleanup() in drm_dev_unregister() causes issues with
drivers that have moved away from the .load() and .unload() midlayer.
Those drivers call drm_dev_unregister() as the first operation at unbind
time, before shutting down the device. This results in warnings due to
drm_vblank_cleanup() being called with vblank interrupts still active,
and then to vblank events being sent after cleanup.
Fix the problem by moving vblank cleanup from drm_dev_unregister() to
drm_dev_release() that is guaranteed to be called after drivers shut
down the device.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
By linking the sizeof to a variable type the code will be less prone to
bugs due to future type changes of variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Move the list of pending IRQ wait instances to the omap_drm_private
structure and the wait queue head to the IRQ wait structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Now that the IRQ list is used for IRQ wait only we can merge
omap_drm_irq and omap_irq_wait and simplify the implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function is only used in omap_irq.c and is just a wrapper around
dispc_mgr_get_vsync_irq(). Remove it and call the dispc function
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The IRQ wait functions are called from the DSS enable and disable
operations only, where the DISPC is guaranteed to be enabled. There's no
need for manual DISPC power management there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The only omap_drm_irq handler doesn't use the irqstatus parameter passed
to the function. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The IRQ registration functions are not used outside of their compilation
unit, make them static. As the __omap_irq_(un)register() functions are
only called by their omap_irq_(un)register() counterparts, merge them
together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of going through a complicated private IRQ registration
mechanism, handle the vblank interrupt activation with the standard
drm_crtc_vblank_get() and drm_crtc_vblank_put() mechanism. This will let
the DRM core keep the vblank interrupt enabled as long as needed to
update the frame counter.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The CRTC pending flag will need to be accessed atomically in the vblank
interrupt handler, memory barriers won't be enough to protect it. Use a
spinlock instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The vblank interrupt is disabled after one occurrence, preventing the
atomic update event from being processed twice. However, this also
prevents the software frame counter from being updated correctly that
would require vblank interrupts to be kept enabled while the CRTC is
active.
In preparation for vblank interrupt fixes, make sure that the atomic
update event will be processed once only when the vblank interrupt will
be kept enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm DSS manager enable/disable operations check the DSS manager
state to avoid double enabling/disabling. Check the CRTC software state
instead to decrease the dependency of the DRM layer to the DSS layer.
The dispc_mgr_is_enabled() function then be turned into a static
function, but needs to be moved up in its compilation unit to avoid a
forward declaration.
Add a WARN_ON to catch double enable or disable that should be prevented
by the DRM core and would be a clear sign of a bug. The warning should
eventually be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM core supports skipping plane update for inactive CRTCs for
hardware that don't need it or can't cope with it. That's our case, and
the driver already skips flushing planes on inactice CRTCs.
We can't remove the check from the driver, as active CRTCs are disabled
at the hardware level when an atomic flush is performed if a mode set is
pending. There's however no need to forward the plane commit calls to
the driver, so use the DRM core infrastructure to skip them with a
detailed comment to explain why the check must still be kept in the
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of conditioning planes update based on the DSS manager hardware
state, use the enabled field newly added to the omap_crtc structure.
This reduces the dependency from the DRM layer to the DSS layer.
The enabled field is a transitory measure, the implementation should use
the CRTC atomic state instead. However, given that CRTCs are currently
not enabled/disabled through their .enable() and .disable() operations
but through a convoluted code paths starting at the associated encoder
operations, there is not clear guarantee that the atomic state always
matches the hardware state. This will be refactored later, at which
point the enabled field will be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of going through a complicated registration mechanism, just
call the OCP error IRQ handler directly from the main IRQ handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of going through a complicated registration mechanism, just
expose the CRTC error IRQ function and call it directly from the main
IRQ handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As the FIFO underflow IRQ handler just prints an error message to the
kernel log, simplify the code by not registering one IRQ handler per
plane but print the messages directly from the main IRQ handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Don't print userspace parameters validation failures as error messages
to avoid giving userspace the ability to flood the kernel log.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The hardware requires all planes to have an identical pitch in number of
pixels. Given that all supported formats use the same number of bytes
per pixel in all planes, framebuffer creation checks can be simplified.
The implementations assumes that no format use more than two planes
which is true with the existing hardware.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Merge the single-user objects_lookup inline function into its caller,
allowing reuse of the error code path.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver stores in a custom structure named format several pieces of
information about the format that are available in the DRM core. Remove
them and get the information from the DRM core instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The only multi-planar format supported by the driver is NV12, there will
thus never be more than two planes per framebuffer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
A fairly trivial move of a matching pair of routines (for preparing a
request for construction) onto an engine vfunc. The ulterior motive is
to be able to create a mock request implementation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-7-chris@chris-wilson.co.uk
PIN_HIGH is an expensive operation (in comparison to allocating from the
hole stack) unsuitable for frequent use (such as switching between
contexts). However, the kernel context should be pinned just once for
the lifetime of the driver, and here it is appropriate to keep it out of
the mappable range (in order to maximise mappable space for users).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-6-chris@chris-wilson.co.uk
As the shadow gvt is not user accessible and does not have an associated
vm, we can mark it as closed during its construction. This saves leaking
the internal knowledge of i915_gem_context into gvt/.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-5-chris@chris-wilson.co.uk
A few users only take the struct_mutex in order to release a reference
to a context. We can expose a kref_put_mutex() wrapper in order to
simplify these users, and optimise taking of the mutex to the final
unref.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-4-chris@chris-wilson.co.uk
The requests conversion introduced a nasty bug where we could generate a
new request in the middle of constructing a request if we needed to idle
the system in order to evict space for a context. The request to idle
would be executed (and waited upon) before the current one, creating a
minor havoc in the seqno accounting, as we will consider the current
request to already be completed (prior to deferred seqno assignment) but
ring->last_retired_head would have been updated and still could allow
us to overwrite the current request before execution.
We also employed two different mechanisms to track the active context
until it was switched out. The legacy method allowed for waiting upon an
active context (it could forcibly evict any vma, including context's),
but the execlists method took a step backwards by pinning the vma for
the entire active lifespan of the context (the only way to evict was to
idle the entire GPU, not individual contexts). However, to circumvent
the tricky issue of locking (i.e. we cannot take struct_mutex at the
time of i915_gem_request_submit(), where we would want to move the
previous context onto the active tracker and unpin it), we take the
execlists approach and keep the contexts pinned until retirement.
The benefit of the execlists approach, more important for execlists than
legacy, was the reduction in work in pinning the context for each
request - as the context was kept pinned until idle, it could short
circuit the pinning for all active contexts.
We introduce new engine vfuncs to pin and unpin the context
respectively. The context is pinned at the start of the request, and
only unpinned when the following request is retired (this ensures that
the context is idle and coherent in main memory before we unpin it). We
move the engine->last_context tracking into the retirement itself
(rather than during request submission) in order to allow the submission
to be reordered or unwound without undue difficultly.
And finally an ulterior motive for unifying context handling was to
prepare for mock requests.
v2: Rename to last_retired_context, split out legacy_context tracking
for MI_SET_CONTEXT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-3-chris@chris-wilson.co.uk
Just a simple move to avoid a forward declaration, though the diff likes
to present itself as a move of intel_logical_ring_alloc_request_extras()
in the opposite direction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-2-chris@chris-wilson.co.uk
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161217010442.GA140619@beast
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161217010402.GA140546@beast
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161217010011.GA140300@beast
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161217005929.GA140260@beast
ast_get_dram_info() configures a window in order to access BMC memory.
A BMC register can be configured to disallow this, and if so, causes
an infinite loop in the ast driver which renders the system unusable.
Fix this by erroring out if an error is detected. On powerpc systems with
EEH, this leads to the device being fenced and the system continuing to
operate.
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215051241.20815-1-ruscur@russell.cc
- Modeset state needs mode_config->connection mutex, that covers
figuring out the encoder, and reading properties (since in the
atomic case those need to look at connector->state).
- Don't hold any locks for stuff that's invariant (i.e. possible
connectors).
- Same for connector lookup and unref, those don't need any locks.
- And finally the probe stuff is only protected by mode_config->mutex.
While at it updated the kerneldoc for these fields in drm_connector
and add docs explaining what's protected by which locks.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-10-daniel.vetter@ffwll.ch
If we're unlucky then the registration from a hotplugged connector
might race with the final registration step on driver load. And since
MST topology discover is asynchronous that's even somewhat likely.
v2: Also update the kerneldoc for @registered!
v3: Review from Chris:
- Improve kerneldoc for late_register/early_unregister callbacks.
- Use mutex_destroy.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218133545.2106-1-daniel.vetter@ffwll.ch
Only static connectors should be left at this point, and we should be
able to clean them out by simply dropping that last reference still
around from drm_connector_init.
If that leaves anything behind then we have a driver bug.
Doing the final cleanup this way also allows us to use
drm_connector_iter, removing the very last place where we walk
connector_list explicitly in drm core&helpers.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-8-daniel.vetter@ffwll.ch
Mostly nothing special (except making sure that really all error paths
and friends call iter_put).
v2: Don't forget the raw connector_list walking in
drm_helper_move_panel_connectors_to_head. That one unfortunately can't
be converted to the iterator helpers, but since it's just some list
splicing best to just wrap the entire thing up in one critical
section.
v3: Bail out after iter_put (Harry).
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215155843.13408-1-daniel.vetter@ffwll.ch
The requirements for connector_list locking are a bit tricky:
- We need to be able to jump over zombie conectors (i.e. with refcount
== 0, but not yet removed from the list). If instead we require that
there's no zombies on the list then the final kref_put must happen
under the list protection lock, which means that locking context
leaks all over the place. Not pretty - better to deal with zombies
and wrap the locking just around the list_del in the destructor.
- When we walk the list we must _not_ hold the connector list lock. We
walk the connector list at an absolutely massive amounts of places,
if all those places can't ever call drm_connector_unreference the
code would get unecessarily complicated.
- connector_list needs it own lock, again too many places that walk it
that we could reuse e.g. mode_config.mutex without resulting in
inversions.
- Lots of code uses these loops to look-up a connector, i.e. they want
to be able to call drm_connector_reference. But on the other hand we
want connectors to stay on that list until they're dead (i.e.
connector_list can't hold a full reference), which means despite the
"can't hold lock for the loop body" rule we need to make sure a
connector doesn't suddenly become a zombie.
At first Dave&I discussed various horror-show approaches using srcu,
but turns out it's fairly easy:
- For the loop body we always hold an additional reference to the
current connector. That means it can't zombify, and it also means
it'll stay on the list, which means we can use it as our iterator to
find the next connector.
- When we try to find the next connector we only have to jump over
zombies. To make sure we don't chase bad pointers that entire loop
is protected with the new connect_list_lock spinlock. And because we
know that we're starting out with a non-zombie (need to drop our
reference for the old connector only after we have our new one),
we're guranteed to still be on the connector_list and either find
the next non-zombie or complete the iteration.
- Only downside is that we need to make sure that the temporary
reference for the loop body doesn't leak. iter_get/put() functions +
lockdep make sure that's the case.
- To avoid a flag day the new iterator macro has an _iter postfix. We
can rename it back once all the users of the unsafe version are gone
(there's about 100 list walkers for the connector_list).
For now this patch only converts all the list walking in the core,
leaving helpers and drivers for later patches. The nice thing is that
we can now finally remove 2 FIXME comments from the
register/unregister functions.
v2:
- use irqsafe spinlocks, so that we can use this in drm_state_dump
too.
- nuke drm_modeset_lock_all from drm_connector_init, now entirely
cargo-culted nonsense.
v3:
- do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave).
- pretty kerneldoc
- add EXPORT_SYMBOL, helpers&drivers are supposed to use this.
v4: Change lockdep annotations to only check whether we release the
iter fake lock again (i.e. make sure that iter_put is called), but
not check any locking dependecies itself. That seams to require a
recursive read lock in trylock mode.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch
This is single-threaded setup code, no need for locks. And anyway,
all properties need to be set up before the driver is registered
anyway, they can't be hot-added.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-5-daniel.vetter@ffwll.ch
This is not driver interface stuff.
Fixes: 6559c901cb ("drm/atomic: add debugfs file to dump out atomic state")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-3-daniel.vetter@ffwll.ch
Spotted while auditing our ioctl table. Also nuke the
not-really-kerneldoc comments, we don't document internals and
definitely don't want to mislead people with the old dragons.
I think with this all the legacy ioctls now have proper drm_legacy_
prefixes.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-2-daniel.vetter@ffwll.ch
Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Stefan Agner <stefan@agner.ch> # For DCU
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc
Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon
Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.
As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.
<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
Pull i915/gvt KVMGT updates from Zhenyu Wang:
"KVMGT support depending on the VFIO/mdev framework"
* tag 'kvmgt-vfio-mdev-for-v4.10-rc1' of git://github.com/01org/gvt-linux:
drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT
drm/i915/gvt/kvmgt: read/write GPA via KVM API
drm/i915/gvt/kvmgt: replace kmalloc() by kzalloc()
Convert some of the obvious hand-rolled ranged overflow sanity checks to
our shiny new range_overflows macro.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-4-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In a number places we hand-roll the overflow sanity check for ranges, so
roll that into single macro, conceived by Chris, along with its typed
variant.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-3-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If we move the sanity checking from gen8_alloc_va_range_3lvl and
gen6_alloc_va_range into i915_vma_bind, we will increase our coverage to
now both callbacks. We also convert each WARN_ON over to a GEM_WARN_ON.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-2-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In a similar spirit to GEM_BUG_ON we now also have GEM_WARN_ON, with the
simple goal of expressing warnings which are truly insane, and so are
only really useful for CI where we have some abusive tests.
v2:
- use BUILD_BUG_ON_INVALID for !DEBUG_GEM
- clarify commit message
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
If we remember that node_list is a circular list containing the fake
head_node, we can use a simple list_next_entry() and skip the NULL check
for the allocated check against the head_node.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161216074718.32500-3-chris@chris-wilson.co.uk
Commit 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs
structure only for the enabled engines") introduced the
dynanically allocated engine instances and created an
potential use after free scenario in logical_render_ring_init
where lrc_destroy_wa_ctx_obj could be called after the engine
instance has been freed.
This can only happen during engine setup/init error handling
which luckily does not happen ever in practice.
Fix is to not call lrc_destroy_wa_ctx_obj since it would have
already been executed from the preceding engine cleanup.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481894322-2145-1-git-send-email-tvrtko.ursulin@linux.intel.com
A complement to drm_mm_for_each_node(), wraps list_for_each_entry_safe()
for walking the list of nodes safe against removal.
Note from Joonas:
"Most of the diff is about __drm_mm_nodes(mm), which could be split into
own patch and keep the R-b's."
But I don't feel like insisting on the resend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: Add note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161216074718.32500-4-chris@chris-wilson.co.uk
udelay_range(1, 2) is inefficient and as discussions with Jani Nikula
<jani.nikula@linux.intel.com> unnecessary here. This replaces this
tight setting with a relaxed delay of min=20 and max=50 which helps
the hrtimer subsystem optimize timer handling.
Fixes: commit be4fc046be ("drm/i915: add VLV DSI PLL Calculations")
Link: http://lkml.org/lkml/2016/12/15/147
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481853578-19834-1-git-send-email-hofrat@osadl.org
udelay_range(2, 3) is inefficient and as discussions with Jani Nikula
<jani.nikula@linux.intel.com> unnecessary here. This replaces this
tight setting with a relaxed delay of min=20 and max=50. which helps
the hrtimer subsystem optimize timer handling.
Link: http://lkml.org/lkml/2016/12/15/127
Fixes: commit 37ab0810c9 ("drm/i915/bxt: DSI enable for BXT")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481853560-19795-1-git-send-email-hofrat@osadl.org
KVMGT leverages vfio/mdev to mediate device accesses from guest,
this patch adds the vfio/mdev support, thereby completes the
functionality. An intel_vgpu is presented as a mdev device,
and full userspace API compatibility with vfio-pci is kept.
An intel_vgpu_ops is provided to mdev framework, methods get
called to create/remove a vgpu, to open/close it, and to
access it.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Previously to read/write a GPA, we at first try to pin the GFN it belongs
to, then translate the pinned PFN to a kernel HVA, then read/write it.
This is however not necessary. A GFN should be pinned IFF it would be
accessed by peripheral devices (DMA), not by CPU. This patch changes
the read/write method to KVM API, which will leverage userspace HVA
and copy_{from|to}_usr instead.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We usually use 'client' as identifier for the i915_guc_client.
For unknown reason, few functions were using 'gc' name.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[joonas.lahtinen@linux.intel.com: Split two lines over 80]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215195321.63804-1-michal.wajdeczko@intel.com
v2: always init gfx pg for asics that can support.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set valid data to mmRLC_SRM_INDEX_CNTL_ADDRx/DATAx.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the CP_PG_DISABLE bit was reversed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
it does not work with GPU pass through if the VM
is not cleanly shutdown leading to a hang when the
modules is reloaded.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Apparently my arm .config had reverted to CMA=n at some point, so I
failed to notice that I typoed the code. Fix it up so that the
cma helper will compile again.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: ca984a998a ("drm/fb_cma_helper: Replace drm_format_info() with fb->format")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215142927.20761-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cast VM pointers before substraction to save the compiler
doing a smart one which includes multiplication.
v2: Only keep the first optimisation and prettify it. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481639847-9214-1-git-send-email-tvrtko.ursulin@linux.intel.com
No point in spamming the log whenever a non-RGB fb is being
constructed. And since there's nothing to do anymore that
fb->bits_per_pixel and fb->depth are gone, we can just kill
off this entire piece of code.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-36-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Rather than compare the format u32s of two format infos, we can direclty
compare the format info pointers themselves. Noramlly all the ->format
pointers all point to somwehere in the big array, so this is a valid
way to test for equality.
Also drivers may want to point ->format at a private format info struct
instead (eg. for special compressed formats with extra planes), so
just comparing the pixel format values wouldn't necessaritly even work.
But comparing the pointers will also take care of that case.
@@
struct drm_framebuffer *a;
struct drm_framebuffer *b;
@@
(
- a->format->format != b->format->format
+ a->format != b->format
|
- a->format->format == b->format->format
+ a->format == b->format
)
@@
struct drm_plane_state *a;
struct drm_plane_state *b;
@@
(
- a->fb->format->format != b->fb->format->format
+ a->fb->format != b->fb->format
|
- a->fb->format->format == b->fb->format->format
+ a->fb->format == b->fb->format
)
@@
struct drm_crtc *crtc;
struct drm_framebuffer *x;
@@
(
- crtc->primary->fb->format->format != x->format->format
+ crtc->primary->fb->format != x->format
|
- x->format->format != crtc->primary->fb->format->format
+ x->format != crtc->primary->fb->format
)
@@
struct drm_mode_set *set;
@@
- set->fb->format->format != set->crtc->primary->fb->format->format
+ set->fb->format != set->crtc->primary->fb->format
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-35-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add variants of drm_format_plane_{width,height}() that take an entire fb
object instead of just the format. These should be more efficent as they
can just look up the format info from the fb->format pointer rather than
having to look it up (using a linear search based on the format).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-30-git-send-email-ville.syrjala@linux.intel.com
Any framebuffer that doesn't have proper format information when
drm_framebuffer_init() is called is a bug. Let's warn and return
an error to avoid oopsing the kernel later due to dereferencing the
NULL fb->format pointer.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-23-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To avoid having to look up the format information struct every time,
let's just store a pointer to it under drm_framebuffer.
v2: Don't populate the fb->format pointer in drm_framebuffer_init().
instead we'll treat a NULL format as an error later
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-20-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Populating fb->dev before drm_framebuffer_init() allows us to use
fb->dev already while validating the framebuffer. Let's have
drm_helper_mode_fill_fb_struct() do that for us.
Also make drm_framebuffer_init() warn us if a different device
pointer is passed to it than was passed to
drm_helper_mode_fill_fb_struct().
v2: Reject fbs with invalid fb->dev (Laurent)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-19-git-send-email-ville.syrjala@linux.intel.com
We want framebuffers to be mostly useable already before
drm_framebuffer_init() get called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-17-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want framebuffers to be mostly useable already before
drm_framebuffer_init() is called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-16-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It looks like the BOE panel FW didn't ack the DPCD600 signal from the
host device, this will cause the panel to hang on the startup display.
The root cause is that we use the fast link mode when we enter and
exit PSR, the issue is gone if we switch from the fast link to main
link mode.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481338159-7189-1-git-send-email-wxt@rock-chips.com
virtio_gpu_queue_ctrl_buffer_locked is called with ctrlq.qlock taken, it
releases and acquires this lock. This causes a sparse warning. Add
appropriate annotations for sparse context checking.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When virtio_gpu_free_vbufs exits due to list empty, it does not
drop the free_vbufs lock that it took.
list empty is not expected to happen anyway, but it can't hurt to fix
this and drop the lock.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_gpu_cmd_transfer_to_host_2d expects x and y
parameters in LE, but virtio_gpu_primary_plane_update
passes in the CPU format instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Every single user of vmf->virtual_address typed that entry to unsigned
long before doing anything with it so the type of virtual_address does
not really provide us any additional safety. Just use masked
vmf->address which already has the appropriate type.
Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: unexport __get_user_pages_unlocked()".
This patch series continues the cleanup of get_user_pages*() functions
taking advantage of the fact we can now pass gup_flags as we please.
It firstly adds an additional 'locked' parameter to
get_user_pages_remote() to allow for its callers to utilise
VM_FAULT_RETRY functionality. This is necessary as the invocation of
__get_user_pages_unlocked() in process_vm_rw_single_vec() makes use of
this and no other existing higher level function would allow it to do
so.
Secondly existing callers of __get_user_pages_unlocked() are replaced
with the appropriate higher-level replacement -
get_user_pages_unlocked() if the current task and memory descriptor are
referenced, or get_user_pages_remote() if other task/memory descriptors
are referenced (having acquiring mmap_sem.)
This patch (of 2):
Add a int *locked parameter to get_user_pages_remote() to allow
VM_FAULT_RETRY faulting behaviour similar to get_user_pages_[un]locked().
Taking into account the previous adjustments to get_user_pages*()
functions allowing for the passing of gup_flags, we are now in a
position where __get_user_pages_unlocked() need only be exported for his
ability to allow VM_FAULT_RETRY behaviour, this adjustment allows us to
subsequently unexport __get_user_pages_unlocked() as well as allowing
for future flexibility in the use of get_user_pages_remote().
[sfr@canb.auug.org.au: merge fix for get_user_pages_remote API change]
Link: http://lkml.kernel.org/r/20161122210511.024ec341@canb.auug.org.au
Link: http://lkml.kernel.org/r/20161027095141.2569-2-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So it looks like the code is trying to pick between the passed in fb and
crtc->primary->fb based on that funky 'bool atomic'. But later it will
mix uses of both drm_fb (which was picked by the aforementioned logic)
and crtc->primary->fb. So looks like a bug to me. Let's make it use
drm_fb only.
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-11-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my ppor
coccinelle skills later.
In some places the local variable was already there, just not used
consistently.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-10-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Use DIV_ROUND_UP() instead of hand rolling it. Just a drive-by change.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-4-git-send-email-ville.syrjala@linux.intel.com
Add a local 'fb' variable to a few places to get rid of the
'crtc->primary->fb' stuff. Looks neater and helps me with my poor
coccinelle skills later.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-3-git-send-email-ville.syrjala@linux.intel.com
For limiting the max frequency of gpu, the max freq tunable
is not enough to hard limit the max gap. We now have also per
client boost max freq. When this tunable was introduced,
it was mistakenly made read only. Allow user to gain control by
setting it writable.
Fixes: 29ecd78d3b ("drm/i915: Define a separate variable and control for RPS waitboost frequency")
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com
THS8135 is a configurable video DAC, but no configuration is actually
necessary to make it work.
For now use the dumb-vga-dac driver to support it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-4-git-send-email-bgolaszewski@baylibre.com
fsl is already fully demidlayered in the probe function, but for
convenience stuck with drm_put_dev. Call the unregister/unref parts
separately, to make sure this driver works correct.
v2: Rebase.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213175449.24525-1-daniel.vetter@ffwll.ch
-----BEGIN PGP SIGNATURE-----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=7s/c
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux into drm-misc-next
Main pull request for drm for 4.10 kernel - resync drm-misc with full
4.10 state (2 new drivers) so that we can start pulling in all the
refactorings for 4.11!
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
If atomic state is available, use this to read the current plane in
GetCrtc/GetPlane, rather than the legacy points.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213181912.92904-1-daniels@collabora.com
-----BEGIN PGP SIGNATURE-----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=7s/c
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main pull request for drm for 4.10 kernel.
New drivers:
- ZTE VOU display driver (zxdrm)
- Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson)
- MXSFB support (mxsfb)
Core:
- Format handling has been reworked
- Better atomic state debugging
- drm_mm leak debugging
- Atomic explicit fencing support
- fbdev helper ops
- Documentation updates
- MST fbcon fixes
Bridge:
- Silicon Image SiI8620 driver
Panel:
- Add support for new simple panels
i915:
- GVT Device model
- Better HDMI2.0 support on skylake
- More watermark fixes
- GPU idling rework for suspend/resume
- DP Audio workarounds
- Scheduler prep-work
- Opregion CADL handling
- GPU scheduler and priority boosting
amdgfx/radeon:
- Support for virtual devices
- New VM manager for non-contig VRAM buffers
- UVD powergating
- SI register header cleanup
- Cursor fixes
- Powermanagement fixes
nouveau:
- Powermangement reworks for better voltage/clock changes
- Atomic modesetting support
- Displayport Multistream (MST) support.
- GP102/104 hang and cursor fixes
- GP106 support
hisilicon:
- hibmc support (BMC chip for aarch64 servers)
armada:
- add tracing support for overlay change
- refactor plane support
- de-midlayer the driver
omapdrm:
- Timing code cleanups
rcar-du:
- R8A7792/R8A7796 support
- Misc fixes.
sunxi:
- A31 SoC display engine support
imx-drm:
- YUV format support
- Cleanup plane atomic update
mali-dp:
- Misc fixes
dw-hdmi:
- Add support for HDMI i2c master controller
tegra:
- IOMMU support fixes
- Error handling fixes
tda998x:
- Fix connector registration
- Improved robustness
- Fix infoframe/audio compliance
virtio:
- fix busid issues
- allocate more vbufs
qxl:
- misc fixes and cleanups.
vc4:
- Fragment shader threading
- ETC1 support
- VEC (tv-out) support
msm:
- A5XX GPU support
- Lots of atomic changes
tilcdc:
- Misc fixes and cleanups.
etnaviv:
- Fix dma-buf export path
- DRAW_INSTANCED support
- fix driver on i.MX6SX
exynos:
- HDMI refactoring
fsl-dcu:
- fbdev changes"
* tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits)
drm/nouveau/kms/nv50: fix atomic regression on original G80
drm/nouveau/bl: Do not register interface if Apple GMUX detected
drm/nouveau/bl: Assign different names to interfaces
drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
drm/nouveau/ltc: protect clearing of comptags with mutex
drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
drm/nouveau/core: recognise GP106 chipset
drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
drm/nouveau/fifo/gf100-: recover from host mmu faults
drm: Add fake controlD* symlinks for backwards compat
drm/vc4: Don't use drm_put_dev
drm/vc4: Document VEC DT binding
drm/vc4: Add support for the VEC (Video Encoder) IP
drm: Add TV connector states to drm_connector_state
drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum
drm/vc4: Fix ->clock_select setting for the VEC encoder
drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
drm/amdgpu: use pin rather than pin_restricted in a few cases
...
drm_put_dev is the old midlayer-broken device cleanup function, but
etnaviv has a proper unbind function which first unregisters and then
drops the final reference. No functional change since
drm_dev_unregister happens to be idempotent.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161208110739.24417-1-daniel.vetter@ffwll.ch
fsl is already fully demidlayered in the probe function, but for
convenience stuck with drm_put_dev. Call the unregister/unref parts
separately, to make sure this driver works correct.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161208110739.24417-3-daniel.vetter@ffwll.ch
This patch does not change anything functionally, just cleans up
the DP compliance related variables and stores them all together
in a separate struct intel_dp_compliance. There is another struct
intel_dp_compliance_data to store all the test data. This makes it easy to
reset the compliance variables through a memset instead of
individual resetting.
v2:
* Removed functional changes for EDID (Jani Nikula)
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwl.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481329371-16306-1-git-send-email-manasi.d.navare@intel.com
If link training fails, then we need to fallback to lower
link rate first and if link training fails at RBR, then
fallback to lower lane count.
This function finds the next lower link rate/lane count
value after link training failure and limits the max
link_rate and lane_count values to these fallback values.
v7:
* Remove unnecessary intializations and remove redundant
call to intel_dp_common_rates (Jani Nikula)
v6:
* Cap the max link rate and lane count to the max
values obtained during fallback link training (Daniel Vetter)
v5:
* Start the fallback at the lane count value passed not
the max lane count (Jani Nikula)
v4:
* Remove the redundant variable link_train_failed
v3:
* Remove fallback_link_rate_index variable, just obtain
that using the helper intel_dp_link_rate_index (Jani Nikula)
v2:
Squash the patch that returns the link rate index (Jani Nikula)
Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481252712-12925-1-git-send-email-manasi.d.navare@intel.com
Sink's capabilities are advertised through DPCD registers and get
updated only on hotplug. So they should be computed only once in the
long pulse handler and saved off in intel_dp structure for the use
later. For this reason two new fields max_sink_lane_count and
max_sink_link_bw are added to intel_dp structure.
This also simplifies the fallback link rate/lane count logic
to handle link training failure. In that case, the max_sink_link_bw
and max_sink_lane_count can be reccomputed to match the fallback
values lowering the sink capabilities due to link train failure.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480984058-552-3-git-send-email-manasi.d.navare@intel.com
Request the GPIO by index through the consumer API. For now, use a quick
hack to store the already requested ones, simply because I have no idea
whether this actually works or not, and I have no way to test it.
v2 by Mika: switch *NULL* to *"panel"* when requesting gpio for MIPI/DSI
panel.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480923034-21916-1-git-send-email-mika.kahola@intel.com
It's deprecated and only should be used by drivers which still use
drm_platform_init, not by anyone else.
And indeed it's entirely unused and can be nuked.
This required a bit more fudging, but I guess kirin_dc_ops really
wants to operate on the platform_device, not something else. Also
bonus points for implementing abstraction, and then storing the vfunc
in a global variable.
v2: Don't break the build soooo badly :(
Note that the cleanup function is a bit confused: ade_data was never
set as drvdata, and calling drm_crtc_cleanup directly is a bug - this
is called indirectly through drm_mode_config_cleanup, which calls into
crtc->destroy, which already has the call to drm_crtc_cleanup. Which
means we can just nuke it.
Note this is the 2nd attempt after the first one failed and had to be
reverted again in
commit 9cd2e854d6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Aug 17 13:59:40 2016 +0200
Revert "drm/hisilicon: Don't set drm_device->platformdev"
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209141944.22121-1-daniel.vetter@ffwll.ch
In preparation to using a generic API in the DRM core for continuous CRC
generation, move the related code out of i915_debugfs.c into a new file.
Eventually, only the Intel-specific code will remain in this new file.
v2: Rebased.
v6: Rebased.
v7: Fix whitespace issue.
v9: Have intel_display_crc_init accept a drm_i915_private instead.
v12: Rebased.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481545788-18194-1-git-send-email-tomeu.vizoso@collabora.com
With the last round of changes all ioctls called by modern drivers now
have their own locking. Everything else is only allowed for legacy
drivers and hence the lack of locking doesn't matter.
One exception is nouveau, due to the DRIVER_KMS_LEGACY_CONTEXT flag.
But that only works its magic on the context and bufs ioctls. And
drm_bufs.c is protected with dev->struct_mutex, and drm_context.c by
the same and dev->ctxlist_mutex. That should be all safe, and we can
finally mandata drm-bkl-less ioctls for everyone!
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161210215255.7765-3-daniel.vetter@ffwll.ch
It only updates per-file feature flags. And all the ioctl which change
behaviour depending upon these flags (they're all kms features) do
_not_ hold the BKL. Therefor this is pure cargo-cult and can be
removed.
Note that there's a risk that the ioctl will behave inconsistently
when userspace is racing with itself, but that's ok. The only thing
it's not allowed to do is oops the kernel, and from an audit all
places are safe.
v2: Clarify that the inconsistency is only when userspace races
(Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161210215255.7765-2-daniel.vetter@ffwll.ch
No one looks at the major/minor versions except the unique/busid
stuff. If we protect that with the master_mutex (since it also affects
the unique of each master, oh well) we can mark these two IOCTL with
DRM_UNLOCKED.
While doing this I realized that the comment for the magic_map is
outdated, I've forgotten to update it in:
commit d2b34ee62b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jun 17 09:33:21 2016 +0200
drm: Protect authmagic with master_mutex
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161210215255.7765-1-daniel.vetter@ffwll.ch
.c and .h source files should not be executable, change
the permissions to 0644.
[ This would normally go through Andrew Morton, but his ancient
patch-based toolchain doesn't do permission changes ]
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Regression fix from atomic conversion (rotation on the original G80).
- Concurrency fix when clearing compression tags.
- Fixes DP link training issues on GP102/4/6.
- Fixes backlight handling in the presence of Apple GMUX.
- Improvements to GPU error recovery in a number of scenarios.
- GP106 support.
* 'linux-4.10' of git://github.com/skeggsb/linux:
drm/nouveau/kms/nv50: fix atomic regression on original G80
drm/nouveau/bl: Do not register interface if Apple GMUX detected
drm/nouveau/bl: Assign different names to interfaces
drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
drm/nouveau/ltc: protect clearing of comptags with mutex
drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
drm/nouveau/core: recognise GP106 chipset
drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
drm/nouveau/fifo/gf100-: recover from host mmu faults
This has a couple of fixes for IOMMU support and some fixes for error
handling.
-----BEGIN PGP SIGNATURE-----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=sDMr
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.10-rc1
This has a couple of fixes for IOMMU support and some fixes for error
handling.
* tag 'drm/tegra/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Set sgt pointer in BO pin
drm/tegra: Support kernel mappings with IOMMU
gpu: host1x: Add locking to syncpt
gpu: host1x: Store device address to all bufs
drm/tegra: gem: Remove some dead code
drm/tegra: sor: No need to free devm_ allocated memory
drm/tegra: Fix error handling
drm/tegra: dpaux: Fix error handling
This adds support for a couple more panels to the simple-panel driver.
There is also a fix for a long-standing bug, but it's not critical since
no code will currently trigger it.
-----BEGIN PGP SIGNATURE-----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=BSYh
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.10-rc1
This adds support for a couple more panels to the simple-panel driver.
There is also a fix for a long-standing bug, but it's not critical since
no code will currently trigger it.
* tag 'drm/panel/for-4.10-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: simple: Add support for AUO G185HAN01
drm/panel: simple: Add support for AUO G133HAN01
drm/panel: simple: Add more properties to Innolux G121I1-L01
drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31
drm/panel: simple: Check against num_timings when setting preferred for timing
drm/panel: Add support for Chunghwa CLAA070WP03XG panel
drm/panel: simple: Add NVD9128 as a simple panel
drm/panel: simple: Add support for AUO T215HVN01
drm/panel: simple: Add support for Sharp LQ150X1LG11 panels
dt-bindings: display: Add Sharp LQ150X1LG11 panel binding
single fix for backwards compat.
* tag 'drm-misc-next-fixes-2016-12-10' of git://anongit.freedesktop.org/git/drm-misc:
drm: Add fake controlD* symlinks for backwards compat
pageflipping race fix.
-----BEGIN PGP SIGNATURE-----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=Sh9P
-----END PGP SIGNATURE-----
Merge tag 'drm-vc4-next-2016-12-09' of https://github.com/anholt/linux into drm-next
This pull request brings in VEC (TV-out) support for vc4, along with a
pageflipping race fix.
* tag 'drm-vc4-next-2016-12-09' of https://github.com/anholt/linux:
drm/vc4: Don't use drm_put_dev
drm/vc4: Document VEC DT binding
drm/vc4: Add support for the VEC (Video Encoder) IP
drm: Add TV connector states to drm_connector_state
drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum
drm/vc4: Fix ->clock_select setting for the VEC encoder
drm/vc4: Fix race between page flip completion event and clean-up
The Apple GMUX is the one managing the backlight, so there is no need for
Nouveau to register its own backlight interface.
v2: Do not split information message on two lines as it prevents from grepping
it, as pointed out by Lukas Wunner
v3: Add a missing end-of-line character to the printed message
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, every backlight interface created by Nouveau uses the same name,
nv_backlight. This leads to a sysfs warning as it tries to create an already
existing folder. This patch adds a incremented number to the name, but keeps
the initial name as nv_backlight, to avoid possibly breaking userspace; the
second interface will be named nv_backlight1, and so on.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86539
v2:
* Switch to using ida for generating unique IDs, as suggested by Ilia Mirkin;
* Allocate backlight name on the stack, as suggested by Ilia Mirkin;
* Move `nouveau_get_backlight_name()` to avoid forward declaration, as
suggested by Ilia Mirkin;
* Fix reference to bug report formatting, as reported by Nick Tenney.
v3:
* Define a macro for the size of the backlight name, to avoid defining
it multiple times;
* Use snprintf in place of sprintf.
v4:
* Do not create similarly named interfaces when reaching the maximum
amount of unique names, but fail instead, as pointed out by Lukas Wunner
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
TTM was changed a while back to allow for pipelining of buffer moves, and
part of this was the removal of waiting for a BO to idle before calling
move(), placing the responsibility on the driver to do this if required.
That's all well and good, except, we make use of move_notify() to handle
mapping/unmapping from the GPU VMM as move() isn't called on all paths.
This commit adds a wait before unmapping from a VMM in move_notify(), to
prevent GPU page faults where a buffer is still being accessed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [v4.8+]
This has been on the TODO list for a while now, recovering from things
such as attempting to execute a push buffer or touch a semaphore in an
unmapped memory area.
The only thing required on the HW side here is that the offending
channel is removed from the runlist, and *not* a full reset of PFIFO.
This used to be a bit messier to handle before the rework to make use
of engine topology info, but is apparently now trivial.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently the backlight controller is taken as 0. It needs to derive
value from the VBT. Adding the necessary changes.
v2 by Jani:
- drop obsolete comments, drop redundant initialization (Bob)
- merge debug logging into one
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481189178-426-1-git-send-email-jani.nikula@intel.com
Some object retain an extra pin whilst they are active (e.g. contexts).
This excludes them from being considered for eviction unless we idle the
GPU. If before we look at the active list, we retire beforehand we can
hopefully remove a few excess pins and reduce the amount of searching
required.
v2: Similar principle applies to evict_for_vma
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209150555.602-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In commit a4f5ea64f0 ("drm/i915: Refactor object page API"), I
reordered the object->pages teardown to be more friendly wrt to a
separate obj->mm.lock. However, I overlooked the phys object and left it
with a dangling use-after-free of its phys_handle. Move the allocation
of the phys handle to get_pages and it release to put_pages to prevent
the invalid access and to improve symmetry.
v2: Add commentary about always aligning to page size.
Testcase: igt/drv_selftest/objects
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: a4f5ea64f0 ("drm/i915: Refactor object page API")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207133411.8028-1-chris@chris-wilson.co.uk
Looping twice when we can do it once is silly. Also use a consistent
style. Note that there's a good race with the connector list walking,
since that is no longer protected by mode_config.mutex. But that's for
a later patch to fix.
v2: Actually try to not blow up, somehow I lost the hunk that checks
we don't copy too much. Noticed by Chris.
v3:
- squash all drm_mode_getresources cleanups into one
- use consistent style for walking objects (Chris)
v4:
- Use u64_to_user_ptr (Chris)
- Don't forget to copy the last connector (Chris)
v5: Chris was right ...
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161211192019.29603-1-daniel.vetter@ffwll.ch
We thought that no userspace is using them, but oops libdrm is using
them to figure out whether a driver supports modesetting. Check out
drmCheckModesettingSupported but maybe don't because it's horrible and
totally runs counter to where we want to go with libdrm device
handling. The function looks in the device hierarchy for whether
controlD* exist using the following format string:
/sys/bus/pci/devices/%04x:%02x:%02x.%d/drm/controlD%d
The "/drm" subdirectory is the glue directory from the sysfs class
stuff, and the only way to get at it seems to through
kdev->kobj.parent (when kdev is represents e.g. the card0 chardev
instance in sysfs). Git grep says we're not the only ones touching
that, so I hope it's ok we dig into such internals - I couldn't find a
proper interface for getting at the glue directory.
Quick git grep shows that at least -amdgpu, -ati are using this.
-modesetting do not, and on -intel it's only about the 4th fallback
path for device lookup, which is why this didn't blow up earlier.
Oh well, we need to keep it working, and the simplest way is to add a
symlink at the right place in sysfs from controlD* to card*.
v2:
- Fix error path handling by adding if (!minor) return checks (David)
- Fix the controlD* numbers to match what's been there (David)
- Add a comment what exactly userspace minimally needs.
- Correct the analysis for -intel (Chris).
Fixes: 8a357d1004 ("drm: Nerf DRM_CONTROL nodes")
Cc: Dave Airlie <airlied@gmail.com>
Reported-and-tested-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209135656.14881-1-daniel.vetter@ffwll.ch
For PSR2 , as per spec, PSR2_CTL bit 31 to be set.
for psr1, bit 31 in SRD_CTL to be set. Reporting
"HW Enabled & Active bit" status for psr2 from SRD_CTL
gives wrong status.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481307129-29354-1-git-send-email-vathsala.nagaraju@intel.com
vc4 already has a proper load sequence, but the unload one needed some
fixups: First unregister, and last drop the final ref.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The VEC IP is a TV DAC, providing support for PAL and NTSC standards.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Some generic TV connector properties are exposed in drm_mode_config, but
they are currently handled independently in each DRM encoder driver.
Extend the drm_connector_state to store TV related states, and modify the
drm_atomic_connector_{set,get}_property() helpers to fill the connector
state accordingly.
Each driver is then responsible for checking and applying the new config
in its ->atomic_mode_{check,set}() operations.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and
rework the vc4_set_crtc_possible_masks() to cover the full range of the
PV_CONTROL_CLK_SELECT field.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This adds a 'Perf' section to i915.rst with the following sub sections:
- Overview
- Comparison with Core Perf
- i915 Driver Entry Points
- i915 Perf Stream
- i915 Perf Observation Architecture Stream
- All i915 Perf Internals
v2:
section headers in i915.rst (Daniel Vetter)
missing symbol docs + other fixups (Matthew Auld)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214033.3581-1-robert@sixbynine.org
Some fixes and cleanup, mainly around fbdev emulation. It also adds a
new module parameter which allows to specify the color depth/bpp for
the fbdev emulation (like the IMX DRM driver).
* tag 'drm-fsl-dcu-for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: introduce kernel parameter to specify fbdev depth
drm/fsl-dcu: remove separate compilation unit for fbdev emulation
drm/fsl-dcu: Propagate the real error code
drm/fsl-dcu: Remove unneeded NULL check
drm/fsl-dcu: disable outputs before unloading driver
drm/fsl-dcu: unload driver before disabling clocks
Another pile of misc stuff, final one for 4.10. If there's some serious
bugfix still I'll send you a pull for drm-misc-next-fixes (like we do with
intel), otherwise this is it and next pull next year for 4.11.
Most interesting bits are probably Chris' fb helper fixes against mst
hotplug oopses.
* tag 'drm-misc-next-2016-12-08' of git://anongit.freedesktop.org/git/drm-misc: (22 commits)
drm: Take ownership of the dmabuf->obj when exporting
drm: Allow CAP_PRIME on !MODESET
drm/fence: add drm_crtc_create_fence()
drm/bridge: analogix: Don't return -EINVAL when panel doesn't support PSR
drm/atomic: doc: remove old comment about nonblocking commits
drm: Don't block the kworker waiting for mode_config.mutex in output_poll()
drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver
drm/amdgpu: don't add files at control minor debugfs directory
drm: allow changing DPMS mode
drm/qxl: fix use of uninitialized variable
drm/qxl: Don't register debugfs for control minors
drm/radeon: don't add files at control minor debugfs directory
drm/vmwgfx: Switch to mode_cmd2
drm/vgem: Use ww_mutex_(un)lock even with a NULL context
drm: Make the connector .detect() callback optional
drm/bridge: tc358767: don't warn if display side ASSR enable fails
drm: Initialise drm_mm.head_node.allocated
drm: Fix locking cargo-cult in encoder/plane init/cleanup
drm/doc: Fix indenting in drm_modeset_lock.c comment
drm: Protect fb_helper list manipulation with a mutex
...
Misc fixes and cleanups for 4.10. Highlights:
- Cursor fixes for radeon and amdgpu
- DPM fixes for some new SI variants
- Powerplay fixes
- Clock and powergating fixes
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (39 commits)
drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
drm/amdgpu: use pin rather than pin_restricted in a few cases
drm/amd/powerplay: use pr_debug to print function not implemented message
drm/amd/amdgpu: Add gpr reading for GFX v7
drm/amd/amdgpu: Add gpr reading for GFX v6
drm/amd/amdgpu: Add debugfs support for reading GPRs (v2)
drm/amd/amdgpu: export vbios information (v2)
drm/amd/amdgpu: stored bios_size
drm/amdgpu: update golden setting of tonga
drm/amdgpu/si: load the proper firmware on 0x87 oland boards
drm/amdgpu: add additional pci revision to dpm workaround
drm/radeon/si: load the proper firmware on 0x87 oland boards
drm/radeon: add additional pci revision to dpm workaround
drm/amd/powerplay: Fix potential NULL pointer issue
drm/amdgpu: Don't touch GFX hw during HW fini
drm/amd/powerplay: Adjust the position of data size initial
drm/amd/powerplay: Ignore smu buffer usage
drm/amd/powerplay: cut digest part
drm/amdgpu: drop redundant vi_mqd define
drm/amdgpu: fix gtt available page num accounting
...
* fix tpd12s015's error handling, which causes omap5 uevm HDMI to fail
* fix omapdrm primary plane allocation bug, which makes the display to fail to
come up
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fhmU
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm fixes for v4.10
* fix tpd12s015's error handling, which causes omap5 uevm HDMI to fail
* fix omapdrm primary plane allocation bug, which makes the display to fail to
come up
* tag 'omapdrm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
drm/omap: tpd12s015: fix error handling
drm/omap: fix primary-plane's possible_crtcs
drm: fix possible_crtc's type
According to the previous patch, it's possible atm that we call
intel_do_sagv_disable() only once during the 1ms period and time out if
that call fails. As opposed to this the spec says that we need to keep
retrying this request for a 1ms duration, so let's do this similarly to
the CDCLK change notification request.
v4-5:
- Rebased on the reply_mask, reply change.
v6:
- Remove w/s change. (Lyude)
- Rebased on the timeout_base argument change.
Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 656d1b89e5 ("drm/i915/skl: Add support for the SAGV, fix underrun hangs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com
commit 848496e590
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Jul 13 16:32:03 2016 +0300
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
increased the timeout to match the spec, but we still see a timeout on
at least one SKL. A CDCLK change request following the failed one will
succeed nevertheless.
I could reproduce this problem easily by running kms_pipe_crc_basic in a
loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
the worst case - when the pre-emption happened right after calculating
timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
once which failed and so _wait_for() timed out. As opposed to this the
spec says to keep retrying the request for at most a 3ms period.
To fix this send the first request explicitly to guarantee that there is
3ms between the first and last request. Though this matches the spec, I
noticed that in rare cases this can still time out if we sent only a few
requests (in the worst case 2) _and_ PCODE is busy for some reason even
after a previous request and a 3ms delay. To work around this retry the
polling with pre-emption disabled to maximize the number of requests.
Also increase the timeout to 10ms to account for interrupts that could
reduce the number of requests. With this change I couldn't trigger
the problem.
v2:
- Use 1ms poll period instead of 10us. (Chris)
v3:
- Poll with pre-emption disabled to increase the number of request
attempts. (Ville, Chris)
- Factor out a helper to poll, it's also needed by the next patch.
v4:
- Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
reply is generic. (Ville)
v5:
- List the request specific timeout values as code comment. (Ville)
v6:
- Try the poll first with preemption enabled.
- Add code comment about first request being queued by PCODE. (Art)
- Add timeout_base_ms argument. (Ville)
v7:
- Clarify code comment about first queued request. (Chris)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms
Cc: <stable@vger.kernel.org> # v4.2-
Fixes: 5d96d8afcf ("drm/i915/skl: Deinit/init the display at suspend/resume")
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
Looks like this was missed when dce_v6_0.c was added.
Fixes: e2cdf640cb ("drm/amdgpu: add display controller implementation for si v10")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We don't require a resticted pinning in these cases, so just
use plain pin.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For CZ, some function pointers like display_configuration_changed
are not set. So when HW manager tries to configure display, we
end up with messages like
"[ powerplay ] this function not implement!"
in the logs. This message is informational, but lacks details
on which function is not implemented and why.
Rather than using KERN_INFO to print the message everytime the
system boots, we rather use pr_debug so that it is only printed
when debug prints are enabled at runtime.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implemented for SGPRs for GFX v8 initially.
(v2) cleanup minor whitespace and remove sanity check and
addressing is in dwords not bytes
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows userspace components to fetch information
from the vbios image.
v2: agd: fix warning
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's necessary if we want to export vbios image out.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When DPMS was introduced to atomic, vblanks only worked when the crtc
was enabled and active. wait_for_vblanks were not converted to check for
crtc_state->active, which may cause an attempt for vblank_get to fail.
This is probably harmless, but convert from enable to active anyway.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-2-git-send-email-maarten.lankhorst@linux.intel.com
tpd12s015 driver is missing error value handling for gpio
initialization, causing 0 to be returned as an error if gpiod_get_*
fails. This may cause deferred probing to fail.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1",
which is fine as the HW planes can be used fro all crtcs. However, when
we're doing that, we are still incrementing 'num_crtcs', and we'll end
up with bad possible_crtcs, preventing the use of the primary planes.
This patch passes a possible_crtcs mask to plane init function so that
we get correct possible_crtc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
