Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
Pull scheduler fixes from Borislav Petkov:
- Adjust code to not trip up CFI
- Fix sched group cookie matching
* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Introduce struct balance_callback to avoid CFI mismatches
sched/core: Fix comparison in sched_group_cookie_match()
Pull objtool fix from Borislav Petkov:
- Fix ORC stack unwinding when GCOV is enabled
* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unreliable stack dump with gcov
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
Jonathan writes:
"1st set of IIO fixes for the 6.1 cycle.
Usual bunch of driver fixes + one set of fixes for driver bugs
introduced by a core change to how buffer attributes are handled.
- buffer attributes
* Remove usage of IIO_CONST_ATTR() for buffer attributes in all drivers
where this occurred as that broke wrapping code need to duplicate these
for multiple buffer support. The minimal fix is moving to
IIO_DEVICE_ATTR_RO() with separate _show() routines. A cleanup of
this code, preventing similar issues in future will follow next merge
window.
- tools/iio
* Wrong handling of number of digits in the number 0.
- adi,ltc2983
* Avoid reallocating channels on each wake up from sleep by moving
that step out of the ltc2983_setup() function.
- microchip,mcp3911
* Wrong ID bits + masking in debug prints.
* Fix ARRAY_SIZE() vs sizeof() mix up.
* Handle NULL return on trigger allocation failure correctly.
- st,stm32-adc:
* Ensure we initialize sampling time even when optional property not
provided in DT. Internal channels require a minimum value that will
not otherwise be set.
- taos,tsl2583
* Fix a double call of iio_device_unregister() via device managed and
un-managed paths."
* tag 'iio-fixes-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
iio: light: tsl2583: Fix module unloading
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
Pull i2c fixes from Wolfram Sang:
"RPM fix for qcom-cci, platform module alias for xiic, build warning
fix for mlxbf, typo fixes in comments"
* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxbf: depend on ACPI; clean away ifdeffage
i2c: fix spelling typos in comments
i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
i2c: xiic: Add platform module alias
Pull pci fixes from Bjorn Helgaas:
- Revert a simplification that broke pci-tegra due to a masking error
- Update MAINTAINERS for Kishon's email address change and TI
DRA7XX/J721E maintainer change
* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. The following ranges of CPUID.80000008H are reserved
and should be masked off:
ECX[31:18]
ECX[11:8]
In addition, the PerfTscSize field at ECX[17:16] should also be zero
because KVM does not set the PERFTSC bit at CPUID.80000001H.ECX[27].
Fixes: 24c82e576b ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220929225203.2234702-3-jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. CPUID.80000001:EBX[27:16] are reserved bits and
should be masked off.
Fixes: 0771671749 ("KVM: Enhance guest cpuid management")
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Fixes: 17601bfed9 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit fc274c1e99 ("USB: gadget: Add a new bus for gadgets"),
the gadget devices are proper driver core devices, which caused each
device to request pinmux settings:
aspeed_vhub 1e6a0000.usb-vhub: Initialized virtual hub in USB2 mode
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin A7 already requested by 1e6a0000.usb-vhub; cannot claim for gadget.0
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin-232 (gadget.0) status -22
aspeed-g5-pinctrl 1e6e2080.pinctrl: could not request pin 232 (A7) from group USB2AD on device aspeed-g5-pinctrl
g_mass_storage gadget.0: Error applying setting, reverse things back
The vhub driver has already claimed the pins, so prevent the gadgets
from requesting them too by setting the magic of_node_reused flag. This
causes the driver core to skip the mux request.
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Reported-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Cc: stable@vger.kernel.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Link: https://lore.kernel.org/r/20221017053006.358520-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there is a transmission error the buffer will be returned too early,
causing a memory fault as subsequent requests for that buffer are still
queued up to be sent. Refactor the error handling to wait for the final
request to come in before reporting back the buffer to userspace for all
transfer types (bulk/isoc/isoc_sg). This ensures userspace knows if the
frame was successfully sent.
Fixes: e81e7f9a0e ("usb: gadget: uvc: add scatter gather support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-4-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the re-use of the previous completion status in 0d1c407b1a749
("usb: dwc3: gadget: Return proper request status") it could be possible
that the next frame would also get dropped if the current frame has a
missed isoc error. Ensure that an interrupt is requested for the start
of a new frame.
Fixes: fc78941d81 ("usb: gadget: uvc: decrease the interrupt load to a quarter")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-2-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget driver may wait on the request completion when it sets the
USB_GADGET_DELAYED_STATUS. Make sure that the End Transfer command can
go through if the dwc->delayed_status is set so that the request can
complete. When the delayed_status is set, the Setup packet is already
processed, and the next phase should be either Data or Status. It's
unlikely that the host would cancel the control transfer and send a new
Setup packet during End Transfer command. But if that's the case, we can
try again when ep0state returns to EP0_SETUP_PHASE.
Fixes: e1ee843488 ("usb: dwc3: gadget: Force sending delayed status during soft disconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3f9f59e5d74efcbaee444cf4b30ef639cc7b124e.1666146954.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki writes:
"coresight: Fixes for v6.1
Fixes for coresight drivers for v6.1
- Fix possible deadlock CTI mutexes (LOCKDEP)
- Fix hang in CTI with runtime power management"
* tag 'coresight-fixes-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: cti: Fix hang in cti_disable_hw()
coresight: Fix possible deadlock with lock dependency
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.
This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254ff ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 fixes for 6.1, take #2
- Fix a bug preventing restoring an ITS containing mappings
for very large and very sparse device topology
- Work around a relocation handling error when compiling
the nVHE object with profile optimisation
KVM/arm64 fixes for 6.1, take #1
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
Currently `sp_indiff` is cleaned when driver is removed. This will
cause problem in multi-PF/multi-host case, considering one PF is
removed while another is still in use.
Since `sp_indiff` is the application firmware property, it should
only be cleaned when the firmware is unloaded. Now let management
firmware to clean it when necessary, driver only set it.
Fixes: b1e4f11e42 ("nfp: refine the ABI of getting `sp_indiff` info")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221020081411.80186-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raju Rangoju says:
====================
amd-xgbe: Miscellaneous fixes
(1) Fix the rrc for Yellow carp devices. CDR workaround path
is disabled for YC devices, receiver reset cycle is not
needed in such cases.
(2) Add enumerations for mailbox command and sub-commands.
Instead of using hard-coded values, use enums.
(3) Enable PLL_CTL for fixed PHY modes only. Driver does not
implement SW RRCM for Autoneg Off configuration, hence PLL
is needed for fixed PHY modes only.
(4) Fix the SFP compliance codes check for DAC cables. Some of
the passive cables have non-zero data at offset 6 in
SFP EEPROM data. So, fix the sfp compliance codes check.
(5) Add a quirk for Molex passive cables to extend the rate
ceiling to 0x78.
====================
Link: https://lore.kernel.org/r/20221020064215.2341278-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected
to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex
passive cables have the rate ceiling 0x78 at offset 12.
Add a quirk for Molex passive cables to extend the rate ceiling to 0x78.
Fixes: abf0a1c2b2 ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive)
cables is NULL. However, some cables (the 5 meter and 7 meter Molex
passive cables) have non-zero data at offset 6. Fix the logic by moving
the passive cable check above the active checks, so as not to be
improperly identified as an active cable. This will fix the issue for
any passive cable that advertises 1000Base-CX in offset 6.
Fixes: abf0a1c2b2 ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PLL control setting(RRC) is needed only in fixed PHY configuration to
fix the peer-peer issues. Without the PLL control setting, the link up
takes longer time in a fixed phy configuration.
Driver implements SW RRC for Autoneg On configuration, hence PLL control
setting (RRC) is not needed for AN On configuration, and can be skipped.
Also, PLL re-initialization is not needed for PHY Power Off and RRC
commands. Otherwise, they lead to mailbox errors. Added the changes
accordingly.
Fixes: daf182d360 ("net: amd-xgbe: Toggle PLL settings during rate change")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using hardcoded values, use enumerations for mailbox command
and sub commands.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link stability issues are noticed on Yellow carp platforms when Receiver
Reset Cycle is issued. Since the CDR workaround is disabled on these
platforms, the Receiver Reset Cycle is not needed.
So, avoid issuing rrc on Yellow carp platforms.
Fixes: dbb6c58b5a ("net: amd-xgbe: Add Support for Yellow Carp Ethernet device")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
