The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode. Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:
BUG: unable to handle kernel NULL pointer dereference at 00000014
IP: [<c039d282>] _spin_lock+0x8/0x19
*pde = 00000000
Oops: 0002 [#1] SMP
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We found a problem with buffer head reference leaks when using an ext4
partition without a journal. In particular, calls to ext4_forget() would
not to a brelse() on the input buffer head, which will cause pages they
belong to to not be reclaimable.
Further investigation showed that all places where ext4_journal_forget() and
ext4_journal_revoke() are called are subject to the same problem. The patch
below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit
release of the buffer head when the journal handle isn't valid.
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch fixes the mmap/truncate race that was fixed for delayed
allocation by merging ext4_{journalled,normal,da}_writepage() into
ext4_writepage().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It is possible to see buffer_heads which are not mapped in the
writepage callback in the following scneario (where the fs blocksize
is 1k and the page size is 4k):
1) truncate(f, 1024)
2) mmap(f, 0, 4096)
3) a[0] = 'a'
4) truncate(f, 4096)
5) writepage(...)
Now if we get a writepage callback immediately after (4) and before an
attempt to write at any other offset via mmap address (which implies we
are yet to get a pagefault and do a get_block) what we would have is the
page which is dirty have first block allocated and the other three
buffer_heads unmapped.
In the above case the writepage should go ahead and try to write the
first blocks and clear the page_dirty flag. Further attempts to write
to the page will again create a fault and result in allocating blocks
and marking page dirty. If we don't write any other offset via mmap
address we would still have written the first block to the disk and
rest of the space will be considered as a hole.
So to address this, we change all of the places where we look for
delayed, unmapped, or unwritten buffer heads, and only check for
delayed or unwritten buffer heads instead.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Buffer heads outside i_size will be unmapped. So when we
are doing "walk_page_buffers" limit ourself to i_size.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
----
The goal inode is specificed by inode number which belongs
to [1; s_inodes_count].
Signed-off-by: Johann Lombardi <johann@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If there is no journal, ext4_should_writeback_data() should return
TRUE. This will fix ext4_set_aops() to set ext4_da_ops in the case of
delayed allocation; otherwise ext4_journaled_aops gets used by
default, which doesn't handle delayed allocation properly.
The advantage of using ext4_should_writeback_data() approach is that
it should handle nobh better as well.
Thanks to Curt Wohlgemuth for investigating this problem, and Aneesh
Kumar for suggesting this approach.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we have space in the extent tree leaf node we should be able to
insert the extent with much less journal credits. The code was doing
proper calculation but missed a return statement.
Reported-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Contents of long symlinks is written via standard write methods. So
when the write fails, we add inode to orphan list. But symlinks don't
have .truncate method defined so nobody properly removes them from the
on disk orphan list.
Fix this by calling ext4_truncate() directly instead of calling
vmtruncate() (which is saner anyway since we don't need anything
vmtruncate() does except from calling .truncate in these paths). We
also add inode to orphan list only if ext4_can_truncate() is true
(currently, it can be false for symlinks when there are no blocks
allocated) - otherwise orphan list processing will complain and
ext4_truncate() will not remove inode from on-disk orphan list.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The following race can happen:
CPU1 CPU2
checkpointing code checks the buffer, adds
it to an array for writeback
do_get_write_access()
...
lock_buffer()
unlock_buffer()
flush_batch() submits the buffer for IO
__jbd2_journal_file_buffer()
So a buffer under writeout is returned from
do_get_write_access(). Since the filesystem code relies on the fact
that journaled buffers cannot be written out, it does not take the
buffer lock and so it can modify buffer while it is under
writeout. That can lead to a filesystem corruption if we crash at the
right moment.
We fix the problem by clearing the buffer dirty bit under buffer_lock
even if the buffer is on BJ_None list. Actually, we clear the dirty
bit regardless the list the buffer is in and warn about the fact if
the buffer is already journalled.
Thanks for spotting the problem goes to dingdinghua <dingdinghua85@gmail.com>.
Reported-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4 module uses rcu_call() thus it should use rcu_barrier()on
module unload.
The kmem cache ext4_pspace_cachep is sometimes free'ed using
call_rcu() callbacks. Thus, we must wait for completion of call_rcu()
before doing kmem_cache_destroy().
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Ted noticed a stack-deep callchain through
writepages->ext4_mb_regular_allocator->ext4_mb_init_cache->submit_bh ...
With all the static functions in mballoc.c, gcc helpfully
inlines for us, and we get something like this:
ext4_mb_regular_allocator (232 bytes stack)
ext4_mb_init_cache (232 bytes stack)
submit_bh (starts 464 deeper)
the 2 ext4 functions here get several others inlined; by telling
gcc not to inline them, we can save stack space for when we
head off into submit_bh land and associated block layer callchains.
The following noinlined functions are only called once, so this
won't impact any other callchains:
ext4_mb_regular_allocator (104) (was 232)
ext4_mb_find_by_goal (56) (noinlined)
ext4_mb_init_group (24) (noinlined)
ext4_mb_init_cache (136) (was 232)
ext4_mb_generate_buddy (88) (noinlined)
ext4_mb_generate_from_pa (40) (noinlined)
submit_bh
ext4_mb_simple_scan_group (24) (noinlined)
ext4_mb_scan_aligned (56) (noinlined)
ext4_mb_complex_scan_group (40) (noinlined)
ext4_mb_try_best_found (24) (noinlined)
now when we head off into submit_bh() we're only 264 bytes deeper
in stack than when we entered ext4_mb_regular_allocator()
(vs. 464 bytes before). Every 200 bytes helps. :)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
nfsd_open() gets an unrefcounted pointer to the current process's effective
credentials at the top of the function, then calls nfsd_setuser() via
fh_verify() - which may replace and destroy the current process's effective
credentials - and then passes the unrefcounted pointer to dentry_open() - but
the credentials may have been destroyed by this point.
Instead, the value from current_cred() should be passed directly to
dentry_open() as one of its arguments, rather than being cached in a variable.
Possibly fh_verify() should return the creds to use.
This is a regression introduced by
745ca2475a "CRED: Pass credentials through
dentry_open()".
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-and-Verified-By: Steve Dickson <steved@redhat.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: fix error message formatting
Btrfs: fix use after free in btrfs_start_workers fail path
Btrfs: honor nodatacow/sum mount options for new files
Btrfs: update backrefs while dropping snapshot
Btrfs: account for space we may use in fallocate
Btrfs: fix the file clone ioctl for preallocated extents
Btrfs: don't log the inode in file_write while growing the file
Make an error msg look nicer by inserting a space between number and word.
Signed-off-by: Hu Tao <hu.taoo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
worker memory is already freed on one fail path in btrfs_start_workers,
but is still dereferenced. Switch the dereference and kfree.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The btrfs attr patches unconditionally inherited the inode flags field
without honoring nodatacow and nodatasum. This fix makes sure
we properly record the nodatacow/sum mount options in new inodes.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The new backref format has restriction on type of backref item. If a tree
block isn't referenced by its owner tree, full backrefs must be used for the
pointers in it. When a tree block loses its owner tree's reference, backrefs
for the pointers in it should be updated to full backrefs. Current
btrfs_drop_snapshot misses the code that updates backrefs, so it's unsafe for
general use.
This patch adds backrefs update code to btrfs_drop_snapshot. It isn't a
problem in the restricted form btrfs_drop_snapshot is used today, but for
general snapshot deletion this update is required.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Using Eric Sandeen's xfstest for fallocate, you can easily trigger a ENOSPC
panic on btrfs. This is because we do not account for data we may use when
doing the fallocate. This patch fixes the problem by properly reserving space,
and then just freeing it when we are done. The reservation stuff was made with
delalloc in mind, so its a little crude for this case, but it keeps the box
from panicing.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The per-user inotify_devs value is incremented each time a new file is
allocated, but never decremented. This led to inotify_init failing after a
limited number of calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
* git://git.infradead.org/mtd-2.6:
mtd: nand: fix build failure and incorrect return from omap_wait()
mtd: Use BLOCK_NIL consistently in NFTL/INFTL
mtd: m25p80 timeout too short for worst-case m25p16 devices
mtd: atmel_nand: Fix typo s/parititions/partitions/
mtd: cmdlineparts: Use 64-bit format when printing a debug message.
mtd: maps: Remove BUS_ID_SIZE from integrator_flash
jffs2: fix another potential leak on error path in scan.c
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: invalidation reverse calls
fuse: allow umask processing in userspace
fuse: fix bad return value in fuse_file_poll()
fuse: fix return value of fuse_dev_write()
Check before use it.
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs. Each bip slab
has an embedded bio_vec array at the end. This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version. Only the largest bip slab is backed by a mempool. The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
Maximum file size for hostfs mounts defaults to 2GB, so bigger files cannot be
read/written through hostfs. This patch initializes the maximum file size to
MAX_LFS_SIZE.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13531
Signed-off-by: Wolfgang Illmeyer <wolfgang@illmeyer.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ext2_iget() returns -ESTALE if invoked on a deleted inode, in order to
report errors to NFS properly. However, in ext[234]_lookup(), this
-ESTALE can be propagated to userspace if the filesystem is corrupted such
that a directory entry references a deleted inode. This leads to a
misleading error message - "Stale NFS file handle" - and confusion on the
part of the admin.
The bug can be easily reproduced by creating a new filesystem, making a
link to an unused inode using debugfs, then mounting and attempting to ls
-l said link.
This patch thus changes ext2_lookup to return -EIO if it receives -ESTALE
from ext2_iget(), as ext2 does for other filesystem metadata corruption;
and also invokes the appropriate ext*_error functions when this case is
detected.
Signed-off-by: Bryan Donlan <bdonlan@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With ELF, at generating coredump, some more headers other than used
vmas are added.
When max_map_count == 65536, a core generated by following kinds of
code can be unreadable because the number of ELF's program header is
written in 16bit in Ehdr (please see elf.h) and the number overflows.
==
... = mmap(); (munmap, mprotect, etc...)
if (failed)
abort();
==
This can happen in mmap/munmap/mprotect/etc...which calls split_vma().
I think 65536 is not safe as _default_ and reduce it to 65530 is good
for avoiding unexpected corrupted core.
Anyway, max_map_count can be enlarged by sysctl if a user is brave..
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jakub Jelinek <jakub@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the eventfd interface to de-couple the eventfd memory context, from
the file pointer instance.
Without such change, there is no clean way to racely free handle the
POLLHUP event sent when the last instance of the file* goes away. Also,
now the internal eventfd APIs are using the eventfd context instead of the
file*.
This patch is required by KVM's IRQfd code, which is still under
development.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't unlock on vfs_rejected_lock path in afs_do_setlk, since the lock
is unlocked after abort_attempt label.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add notification messages that allow the filesystem to invalidate VFS
caches.
Two notifications are added:
1) inode invalidation
- invalidate cached attributes
- invalidate a range of pages in the page cache (this is optional)
2) dentry invalidation
- try to invalidate a subtree in the dentry cache
Care must be taken while accessing the 'struct super_block' for the
mount, as it can go away while an invalidation is in progress. To
prevent this, introduce a rw-semaphore, that is taken for read during
the invalidation and taken for write in the ->kill_sb callback.
Cc: Csaba Henk <csaba@gluster.com>
Cc: Anand Avati <avati@zresearch.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
This patch lets filesystems handle masking the file mode on creation.
This is needed if filesystem is using ACLs.
- The CREATE, MKDIR and MKNOD requests are extended with a "umask"
parameter.
- A new FUSE_DONT_MASK flag is added to the INIT request/reply. With
this the filesystem may request that the create mode is not masked.
CC: Jean-Pierre André <jean-pierre.andre@wanadoo.fr>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
On 64 bit systems -- where sizeof(ssize_t) > sizeof(int) -- the following test
exposes a bug due to a non-careful return of an int or unsigned value:
implement a FUSE filesystem which sends an unsolicited notification to
the kernel with invalid opcode. The respective write to /dev/fuse
will return (1 << 32) - EINVAL with errno == 0 instead of -1 with
errno == EINVAL.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
This patch fixes an imbalance message as reported by J.R. Okajima.
The IMA file counters are incremented in ima_path_check. If the
actual open fails, such as ETXTBSY, decrement the counters to
prevent unnecessary imbalance messages.
Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Fixes a regression caused by commit a6ce4932fb
When this lock was converted to a mutex, the locks were turned into
unlocks and vice-versa.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] remove unknown mount option warning message
[CIFS] remove bkl usage from umount begin
cifs: Fix incorrect return code being printed in cFYI messages
[CIFS] cleanup asn handling for ntlmssp
[CIFS] Copy struct *after* setting the port, instead of before.
cifs: remove rw/ro options
cifs: fix problems with earlier patches
cifs: have cifs parse scope_id out of IPv6 addresses and use it
[CIFS] Do not send tree disconnect if session is already disconnected
[CIFS] Fix build break
cifs: display scopeid in /proc/mounts
cifs: add new routine for converting AF_INET and AF_INET6 addrs
cifs: have cifs_show_options show forceuid/forcegid options
cifs: remove unneeded NULL checks from cifs_show_options
Jeff's previous patch which removed the unneeded rw/ro
parsing can cause a minor warning in dmesg (about the
unknown rw or ro mount option) at mount time. This
patch makes cifs ignore them in kernel to remove the warning
(they are already handled in the mount helper and VFS).
Signed-off-by: Steve French <sfrench@us.ibm.com>
The lock_kernel call moved into the fs for umount_begin
is not needed. This adds a check to make sure we don't
call umount_begin twice on the same fs.
umount_begin for cifs is probably not needed and
may eventually be able to be removed, but in
the meantime this smaller patch is safe and
gets rid of the bkl from this path which provides
some benefit.
Acked-by: Jeff Layton <redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
FreeXid() along with freeing Xid does add a cifsFYI debug message that
prints rc (return code) as well. In some code paths where we set/return
error code after calling FreeXid(), incorrect error code is being
printed when cifsFYI is enabled.
This could be misleading in few cases. For eg.
In cifs_open() if cifs_fill_filedata() returns a valid pointer to
cifsFileInfo, FreeXid() prints rc=-13 whereas 0 is actually being
returned. Fix this by setting rc before calling FreeXid().
Basically convert
FreeXid(xid); rc = -ERR;
return -ERR; => FreeXid(xid);
return rc;
[Note that Christoph would like to replace the GetXid/FreeXid
calls, which are primarily used for debugging. This seems
like a good longer term goal, but although there is an
alternative tracing facility, there are no examples yet
available that I know of that we can use (yet) to
convert this cifs function entry/exit logging, and for
creating an identifier that we can use to correlate
all dmesg log entries for a particular vfs operation
(ie identify all log entries for a particular vfs
request to cifs: e.g. a particular close or read or write
or byte range lock call ... and just using the thread id
is harder). Eventually when a replacement
for this is available (e.g. when NFS switches over and various
samples to look at in other file systems) we can remove the
GetXid/FreeXid macro but in the meantime multiple people
use this run time configurable logging all the time
for debugging, and Suresh's patch fixes a problem
which made it harder to notice some low
memory problems in the log so it is worthwhile
to fix this problem until a better logging
approach is able to be used]
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Also removes obsolete distinction between rawntlmssp and ntlmssp (in asn/SPNEGO)
since as jra noted we can always send raw ntlmssp in session setup now.
remove check for experimental runtime flag (/proc/fs/cifs/Experimental) in
ntlmssp path.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
cifs: remove rw/ro options
These options are handled at the VFS layer. They only ever set the
option in the smb_vol struct. Nothing was ever done with them afterward
anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
