Add NAND support. The sama7g5's SMC IP is the same as sama5d2's with
a slightly change: it provides a synchronous clock output (SMC clock)
that is dedicated to FPGA usage. Since this doesn't interfere with the SMC
NAND configuration, thus code will not be added in the current nand driver
to address the FPGA usage, use the sama5d2's compatible and choose not to
introduce dedicated compatibles for sama7g5.
Tested with Micron MT29F4G08ABAEAWP NAND flash.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
[nicolas.ferre@microchip.com: add the definition of PMC_MCK1 in
include/dt-bindings/clock/at91.h from another patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111130556.905978-1-tudor.ambarus@microchip.com
dt-bindings: Changes for v5.18-rc1
This contains additions to various DT bindings includes (such as clocks,
resets, power domains, memory controller clients and SMMU stream IDs)
for Tegra234.
* tag 'tegra-for-5.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: Add Tegra234 PCIe memory
dt-bindings: power: Add Tegra234 PCIe power domains
dt-bindings: Add Tegra234 PCIe clocks and resets
dt-bindings: Document Tegra234 HDA support
dt-bindings: Add HDA support for Tegra234
dt-bindings: Add Tegra234 APE support
dt-bindings: Add headers for Tegra234 PWM
dt-bindings: Add headers for Tegra234 I2C
Link: https://lore.kernel.org/r/20220225164741.1064416-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM DT updates for v5.18 (take two)
- Document the use of the renesas-soc IRC channel,
- Watchdog support for the R-Car S4-8, RZ/N1D, and RZ/G2LC SoCs on the
Spider, RZN1D-DB, and RZ/G2LC SMARC EVK development boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: Align GPIO hog names with dtschema
arm64: dts: renesas: Align GPIO hog names with dtschema
arm64: dts: renesas: rzg2lc-smarc-som: Enable watchdog
ARM: dts: r9a06g032-rzn1d400-db: Enable watchdog0 with a 60s timeout
ARM: dts: r9a06g032: Add the watchdog nodes
dt-bindings: clock: r9a06g032: Add the definition of the watchdog clock
arm64: dts: renesas: spider-cpu: Enable watchdog timer
arm64: dts: renesas: r8a779f0: Add RWDT node
MAINTAINERS: Specify IRC channel for Renesas ARM64 port
MAINTAINERS: Specify IRC channel for Renesas ARM32 port
arm64: dts: renesas: ulcb-kf: fix wrong comment
Link: https://lore.kernel.org/r/cover.1645784466.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM DT updates for v5.18
- External interrupt (INTC-EX) support for the R-Car V3U SoC,
- Initial support for the RZ/G2LC and RZ/V2L SoCs, and the RZ/G2LC and
RZ/V2L SMARC EVK development boards,
- Support for MAX9286 GMSL deserializers and GSML cameras on the Eagle
and Condor development boards,
- NAND support for the RZ/N1D SoC,
- DMA engine (SYS-DMAC) support for the R-Car S4-8 SoC,
- LVDS support for the R-Car M3-W+ SoC,
- HDMI output and 9-axis sensor support for the Kingfisher (ULCB
extension) board,
- MAX96712 GMSL serializer support for the Falcon development board,
- MOST network support for the R-Car H3, M3-W, M3-W+, M3-N, E3, and D3
SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (27 commits)
arm64: dts: renesas: rzg2lc-smarc: Use SW_SD0_DEV_SEL macro for eMMC/SDHI device selection
arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1
arm64: dts: renesas: rzg2lc-smarc: Enable SCIF1 on carrier board
arm64: dts: renesas: rzg2lc-smarc: Add macros for DIP-Switch settings
arm64: dts: renesas: rzg2l-smarc: Add common dtsi file
arm64: dts: renesas: rzg2lc-smarc: Enable microSD on SMARC platform
arm64: dts: renesas: rzg2lc-smarc-som: Enable eMMC on SMARC platform
arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC
dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
arm64: dts: renesas: ulcb/ulcb-kf: switch to use audio-graph-card2 for sound
arm64: dts: renesas: rcar-gen3: Add MOST devices
arm64: dts: renesas: Miscellaneous whitespace fixes
arm64: dts: renesas: falcon-csi-dsi: Add and connect MAX96712
arm64: dts: renesas: ulcb-kf: Add 9-asix sensor device
arm64: dts: renesas: ulcb-kf: Add KF HDMI output
arm64: dts: renesas: r8a77961: Add lvds0 device node
arm64: dts: renesas: r8a779f0: Add sys-dmac nodes
ARM: dts: r9a06g032: Describe the NAND controller
arm64: dts: renesas: Add GMSL cameras .dtsi
...
Link: https://lore.kernel.org/r/cover.1644587200.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the clocks and resets used by the PCIe hardware found on
Tegra234 SoCs.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add clocks, power-domain and memory bindings to support APE subsystem
on Tegra234.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
These new RTC variants all have a single alarm, like the R40 variant.
For the new SoCs, start requiring a complete list of input clocks. The
H616 has three required clocks. The R329 also has three required clocks
(but one is different), plus an optional crystal oscillator input. The
D1 RTC is identical to the one in the R329.
And since these new SoCs will have a well-defined output clock order as
well, they do not need the clock-output-names property.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-3-samuel@sholland.org
Fixes for omaps
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
* tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Don't use legacy clock defines for dra7 clkctrl
clk: ti: Move dra7 clock devices out of the legacy section
ARM: dts: Fix timer regression for beagleboard revision c
ARM: dts: am335x-wega: Fix typo in mcasp property rx-num-evt
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
ARM: OMAP2+: hwmod: Add of_node_put() before break
Link: https://lore.kernel.org/r/pull-1641801310-149268@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull clk updates from Stephen Boyd:
"We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support.
Per usual (or maybe just recent trends), Qualcomm gains a handful of
SoC drivers additions and has the largest diffstat. After that there
are quite a few updates to the Allwinner (sunxi) drivers to support
modular drivers and Renesas is heavily updated to add more support for
various clks.
Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in
drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
clock drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
clk: bm1880: remove kfrees on static allocations
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
clk: Enable/Disable runtime PM for clk_summary
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
...
- Clock and reset driver for Toshiba Visconti SoCs
* clk-socfpga:
clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource()
clk: socfpga: remove redundant assignment after a mask operation
clk: socfpga: remove redundant assignment on division
* clk-toshiba:
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC
dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC
* clk-st:
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
* clk-bitmain:
clk: bm1880: remove kfrees on static allocations
* clk-x86:
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: Introduce clk-tps68470 driver
platform/x86: int3472: Deal with probe ordering issues
platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
platform/x86: int3472: Add get_sensor_adev_and_name() helper
platform/x86: int3472: Split into 2 drivers
platform_data: Add linux/platform_data/tps68470.h file
i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
* clk-stm:
clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell
* clk-amlogic:
clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB
* clk-allwinner:
clk: sunxi-ng: Add support for the D1 SoC clocks
clk: sunxi-ng: gate: Add macros for gates with fixed dividers
clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw
clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw
dt-bindings: clk: Add compatibles for D1 CCUs
clk: sunxi-ng: Allow the CCU core to be built as a module
clk: sunxi-ng: Convert early providers to platform drivers
clk: sunxi-ng: Allow drivers to be built as modules
clk: sunxi-ng: Export symbols used by CCU drivers
Pull RISC-V SoC updates from Arnd Bergmann:
"Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype board,
with additional boards to be added later. This SoC promises to be the
first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding a
few other Arm based SoCs as well, but those did not pass the review in
time, so it's only this one"
* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
reset: starfive-jh7100: Fix 32bit compilation
RISC-V: Add BeagleV Starlight Beta device tree
RISC-V: Add initial StarFive JH7100 device tree
serial: 8250_dw: Add StarFive JH7100 quirk
dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
pinctrl: starfive: Add pinctrl driver for StarFive SoCs
dt-bindings: pinctrl: Add StarFive JH7100 bindings
dt-bindings: pinctrl: Add StarFive pinctrl definitions
reset: starfive-jh7100: Add StarFive JH7100 reset driver
dt-bindings: reset: Add Starfive JH7100 reset bindings
dt-bindings: reset: Add StarFive JH7100 reset definitions
clk: starfive: Add JH7100 clock generator driver
dt-bindings: clock: starfive: Add JH7100 bindings
dt-bindings: clock: starfive: Add JH7100 clock definitions
dt-bindings: interrupt-controller: Add StarFive JH7100 plic
dt-bindings: timer: Add StarFive JH7100 clint
RISC-V: Add StarFive SoC Kconfig option
The Ingenic JZ4760 and JZ4770 both have an extra DMA core named BDMA
dedicated to the NAND and BCH controller, but which can also do
memory-to-memory transfers. The JZ4760 additionally has a DMA core named
MDMA dedicated to memory-to-memory transfers. The programming manual for
the JZ4770 does have a bit for a MDMA clock, but does not seem to have
the hardware wired in.
Add macros for the MDMA and BDMA clocks to the dt-bindings include
files, so that they can be used within Device Tree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211220193319.114974-2-paul@crapouillou.net
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Qualcomm ARM64 DeviceTree updates for v5.17
This introduces initial support for the brand new Snapdragon 8 Gen 1,
aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses,
TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and
USB currently supported.
SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo
Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are
described as thermal zones. OnePlus devices gains msm-id and board-id,
to facilitate a single firmware image for the multiple devices.
On SM8350 the Sony Xperia 1 III and 5 III, as well as initial
description of Microsoft's Surface Duo 2 are introduced. On the
platform side, LLCC, QUP nodes, redistributor stride and all the
low-speed QUPs are added
MSM8996 gained various regulator fixes, and adsp firmware name to
faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained
touchkey controller definition.
On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and
regulator definitions, USB, eMMC and SD-card and a simple-framebuffer
description.
MSM8916 has the mmc aliases corrected, to stop the storage devices to
move around and the RPM sleep stats memory is described. Support for the
Samsung J5 2015 smartphone is introduced.
SM6350 validation errors are fixed and and description of the audio,
compute and modem remoteprocs are added.
A couple new revisions of the SC7180 based Google devices are added.
The SC7280 platform gains venus and a few fixes. The CRD development
device is introduced, with the EC, touchscreen and touchpad.
On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based
on CPU frequency, are added. As is TX, RX macros and SoundWire blocks
and used to enable audio on the SM8350 MTP.
* tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (92 commits)
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes
arm64: dts: qcom: sm8450: add cpufreq support
arm64: dts: qcom: sm8450: Add rpmhpd node
arm64: dts: qcom: sm8450-qrd: enable ufs nodes
arm64: dts: qcom: sm8450: add ufs nodes
arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes
arm64: dts: qcom: Add base SM8450 QRD DTS
arm64: dts: qcom: sm8450: add smmu nodes
arm64: dts: qcom: sm8450: Add reserved memory nodes
arm64: dts: qcom: sm8450: Add tlmm nodes
arm64: dts: qcom: Add base SM8450 DTSI
arm64: dts: qcom: ipq6018: Fix gpio-ranges property
arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible
arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
arm64: qcom: dts: drop legacy property #stream-id-cells
Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer"
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I accidentally added some dra7 clock defines to the legacy section that
we want to stop using. Let's move the defines to the right location.
Note that this is just a cosmetic fix.
Cc: linux-clk@vger.kernel.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
* tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Drop input-name property
ARM: dts: qcom: sdx65: Add pincontrol node
ARM: dts: qcom: Add SDX65 platform and MTP board support
dt-bindings: arm: qcom: Document SDX65 platform and boards
dt-bindings: clock: Add SDX65 GCC clock bindings
ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32
ARM: dts: qcom: sdx55-t55: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable PCIe EP
ARM: dts: qcom: sdx55: Add support for PCIe EP
ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY
ARM: dts: qcom: sdx55: Add support for PCIe PHY
ARM: dts: qcom: update USB nodes with new platform specific compatible
Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
