Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
Pull arm64 updates from Catalin Marinas:
- Initial support for the ARMv9 Scalable Matrix Extension (SME).
SME takes the approach used for vectors in SVE and extends this to
provide architectural support for matrix operations. No KVM support
yet, SME is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for
monitoring coherent I/O traffic, support for Arm's CMN-650 and
CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits)
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Move sve_free() into SVE code section
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: kdump: Do not allocate crash low memory if not needed
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
...
* for-next/esr-elx-64-bit:
: Treat ESR_ELx as a 64-bit register.
KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high
KVM: arm64: Treat ESR_EL2 as a 64-bit register
arm64: Treat ESR_ELx as a 64-bit register
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
arm64: Make ESR_ELx_xVC_IMM_MASK compatible with assembly
KVM/arm64 fixes for 5.18, take #3
- Correctly expose GICv3 support even if no irqchip is created
so that userspace doesn't observe it changing pointlessly
(fixing a regression with QEMU)
- Don't issue a hypercall to set the id-mapped vectors when
protected mode is enabled (fix for pKVM in combination with
CPUs affected by Spectre-v3a)
* for-next/sme: (29 commits)
: Scalable Matrix Extensions support.
arm64/sve: Make kernel FPU protection RT friendly
arm64/sve: Delay freeing memory in fpsimd_flush_thread()
arm64/sme: More sensibly define the size for the ZA register set
arm64/sme: Fix NULL check after kzalloc
arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding()
arm64/sme: Provide Kconfig for SME
KVM: arm64: Handle SME host state when running guests
KVM: arm64: Trap SME usage in guest
KVM: arm64: Hide SME system registers from guests
arm64/sme: Save and restore streaming mode over EFI runtime calls
arm64/sme: Disable streaming mode and ZA when flushing CPU state
arm64/sme: Add ptrace support for ZA
arm64/sme: Implement ptrace support for streaming mode SVE registers
arm64/sme: Implement ZA signal handling
arm64/sme: Implement streaming SVE signal handling
arm64/sme: Disable ZA and streaming mode when handling signals
arm64/sme: Implement traps and syscall handling for SME
arm64/sme: Implement ZA context switching
arm64/sme: Implement streaming SVE context switching
arm64/sme: Implement SVCR context switching
...
* kvm-arm64/its-save-restore-fixes-5.19:
: .
: Tighten the ITS save/restore infrastructure to fail early rather
: than late. Patches courtesy of Rocardo Koller.
: .
KVM: arm64: vgic: Undo work in failed ITS restores
KVM: arm64: vgic: Do not ignore vgic_its_restore_cte failures
KVM: arm64: vgic: Add more checks when restoring ITS tables
KVM: arm64: vgic: Check that new ITEs could be saved in guest memory
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/misc-5.19:
: .
: Misc fixes and general improvements for KVMM/arm64:
:
: - Better handle out of sequence sysregs in the global tables
:
: - Remove a couple of unnecessary loads from constant pool
:
: - Drop unnecessary pKVM checks
:
: - Add all known M1 implementations to the SEIS workaround
:
: - Cleanup kerneldoc warnings
: .
KVM: arm64: vgic-v3: List M1 Pro/Max as requiring the SEIS workaround
KVM: arm64: pkvm: Don't mask already zeroed FEAT_SVE
KVM: arm64: pkvm: Drop unnecessary FP/SIMD trap handler
KVM: arm64: nvhe: Eliminate kernel-doc warnings
KVM: arm64: Avoid unnecessary absolute addressing via literals
KVM: arm64: Print emulated register table name when it is unsorted
KVM: arm64: Don't BUG_ON() if emulated register table is unsorted
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/per-vcpu-host-pmu-data:
: .
: Pass the host PMU state in the vcpu to avoid the use of additional
: shared memory between EL1 and EL2 (this obviously only applies
: to nVHE and Protected setups).
:
: Patches courtesy of Fuad Tabba.
: .
KVM: arm64: pmu: Restore compilation when HW_PERF_EVENTS isn't selected
KVM: arm64: Reenable pmu in Protected Mode
KVM: arm64: Pass pmu events to hyp via vcpu
KVM: arm64: Repack struct kvm_pmu to reduce size
KVM: arm64: Wrapper for getting pmu_events
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
We generally want to disallow hypercall bitmaps being changed
once vcpus have already run. But we must allow the write if
the written value is unchanged so that userspace can rewrite
the register file on reboot, for example.
Without this, a QEMU-based VM will fail to reboot correctly.
The original code was correct, and it is me that introduced
the regression.
Fixes: 05714cab7d ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Failed ITS restores should clean up all state restored until the
failure. There is some cleanup already present when failing to restore
some tables, but it's not complete. Add the missing cleanup.
Note that this changes the behavior in case of a failed restore of the
device tables.
restore ioctl:
1. restore collection tables
2. restore device tables
With this commit, failures in 2. clean up everything created so far,
including state created by 1.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-5-ricarkol@google.com
Restoring a corrupted collection entry (like an out of range ID) is
being ignored and treated as success. More specifically, a
vgic_its_restore_cte failure is treated as success by
vgic_its_restore_collection_table. vgic_its_restore_cte uses positive
and negative numbers to return error, and +1 to return success. The
caller then uses "ret > 0" to check for success.
Fix this by having vgic_its_restore_cte only return negative numbers on
error. Do this by changing alloc_collection return codes to only return
negative numbers on error.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-4-ricarkol@google.com
Try to improve the predictability of ITS save/restores (and debuggability
of failed ITS saves) by failing early on restore when trying to read
corrupted tables.
Restoring the ITS tables does some checks for corrupted tables, but not as
many as in a save: an overflowing device ID will be detected on save but
not on restore. The consequence is that restoring a corrupted table won't
be detected until the next save; including the ITS not working as expected
after the restore. As an example, if the guest sets tables overlapping
each other, which would most likely result in some corrupted table, this is
what we would see from the host point of view:
guest sets base addresses that overlap each other
save ioctl
restore ioctl
save ioctl (fails)
Ideally, we would like the first save to fail, but overlapping tables could
actually be intended by the guest. So, let's at least fail on the restore
with some checks: like checking that device and event IDs don't overflow
their tables.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-3-ricarkol@google.com
Try to improve the predictability of ITS save/restores by failing
commands that would lead to failed saves. More specifically, fail any
command that adds an entry into an ITS table that is not in guest
memory, which would otherwise lead to a failed ITS save ioctl. There
are already checks for collection and device entries, but not for
ITEs. Add the corresponding check for the ITT when adding ITEs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510001633.552496-2-ricarkol@google.com
Moving kvm_pmu_events into the vcpu (and refering to it) broke the
somewhat unusual case where the kernel has no support for a PMU
at all.
In order to solve this, move things around a bit so that we can
easily avoid refering to the pmu structure outside of PMU-aware
code. As a bonus, pmu.c isn't compiled in when HW_PERF_EVENTS
isn't selected.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/202205161814.KQHpOzsJ-lkp@intel.com
Will reported the following splat when running with Protected KVM
enabled:
[ 2.427181] ------------[ cut here ]------------
[ 2.427668] WARNING: CPU: 3 PID: 1 at arch/arm64/kvm/mmu.c:489 __create_hyp_private_mapping+0x118/0x1ac
[ 2.428424] Modules linked in:
[ 2.429040] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc2-00084-g8635adc4efc7 #1
[ 2.429589] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2.430286] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.430734] pc : __create_hyp_private_mapping+0x118/0x1ac
[ 2.431091] lr : create_hyp_exec_mappings+0x40/0x80
[ 2.431377] sp : ffff80000803baf0
[ 2.431597] x29: ffff80000803bb00 x28: 0000000000000000 x27: 0000000000000000
[ 2.432156] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 2.432561] x23: ffffcd96c343b000 x22: 0000000000000000 x21: ffff80000803bb40
[ 2.433004] x20: 0000000000000004 x19: 0000000000001800 x18: 0000000000000000
[ 2.433343] x17: 0003e68cf7efdd70 x16: 0000000000000004 x15: fffffc81f602a2c8
[ 2.434053] x14: ffffdf8380000000 x13: ffffcd9573200000 x12: ffffcd96c343b000
[ 2.434401] x11: 0000000000000004 x10: ffffcd96c1738000 x9 : 0000000000000004
[ 2.434812] x8 : ffff80000803bb40 x7 : 7f7f7f7f7f7f7f7f x6 : 544f422effff306b
[ 2.435136] x5 : 000000008020001e x4 : ffff207d80a88c00 x3 : 0000000000000005
[ 2.435480] x2 : 0000000000001800 x1 : 000000014f4ab800 x0 : 000000000badca11
[ 2.436149] Call trace:
[ 2.436600] __create_hyp_private_mapping+0x118/0x1ac
[ 2.437576] create_hyp_exec_mappings+0x40/0x80
[ 2.438180] kvm_init_vector_slots+0x180/0x194
[ 2.458941] kvm_arch_init+0x80/0x274
[ 2.459220] kvm_init+0x48/0x354
[ 2.459416] arm_init+0x20/0x2c
[ 2.459601] do_one_initcall+0xbc/0x238
[ 2.459809] do_initcall_level+0x94/0xb4
[ 2.460043] do_initcalls+0x54/0x94
[ 2.460228] do_basic_setup+0x1c/0x28
[ 2.460407] kernel_init_freeable+0x110/0x178
[ 2.460610] kernel_init+0x20/0x1a0
[ 2.460817] ret_from_fork+0x10/0x20
[ 2.461274] ---[ end trace 0000000000000000 ]---
Indeed, the Protected KVM mode promotes __create_hyp_private_mapping()
to a hypercall as EL1 no longer has access to the hypervisor's stage-1
page-table. However, the call from kvm_init_vector_slots() happens after
pKVM has been initialized on the primary CPU, but before it has been
initialized on secondaries. As such, if the KVM initcall procedure is
migrated from one CPU to another in this window, the hypercall may end up
running on a CPU for which EL2 has not been initialized.
Fortunately, the pKVM hypervisor doesn't rely on the host to re-map the
vectors in the private range, so the hypercall in question is in fact
superfluous. Skip it when pKVM is enabled.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
[maz: simplified the checks slightly]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513092607.35233-1-qperret@google.com
When adding support for the slightly wonky Apple M1, we had to
populate ID_AA64PFR0_EL1.GIC==1 to present something to the guest,
as the HW itself doesn't advertise the feature.
However, we gated this on the in-kernel irqchip being created.
This causes some trouble for QEMU, which snapshots the state of
the registers before creating a virtual GIC, and then tries to
restore these registers once the GIC has been created. Obviously,
between the two stages, ID_AA64PFR0_EL1.GIC has changed value,
and the write fails.
The fix is to actually emulate the HW, and always populate the
field if the HW is capable of it.
Fixes: 562e530fd7 ("KVM: arm64: Force ID_AA64PFR0_EL1.GIC=1 when exposing a virtual GICv3")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220503211424.3375263-1-maz@kernel.org
Now that the pmu code does not access hyp data, reenable it in
protected mode.
Once fully supported, protected VMs will not have pmu support,
since that could leak information. However, non-protected VMs in
protected mode should have pmu support if available.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-5-tabba@google.com
Instead of the host accessing hyp data directly, pass the pmu
events of the current cpu to hyp via the vcpu.
This adds 64 bits (in two fields) to the vcpu that need to be
synced before every vcpu run in nvhe and protected modes.
However, it isolates the hypervisor from the host, which allows
us to use pmu in protected mode in a subsequent patch.
No visible side effects in behavior intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-4-tabba@google.com
Unsusprisingly, Apple M1 Pro/Max have the exact same defect as the
original M1 and generate random SErrors in the host when a guest
tickles the GICv3 CPU interface the wrong way.
Add the part numbers for both the CPU types found in these two
new implementations, and add them to the hall of shame. This also
applies to the Ultra version, as it is composed of 2 Max SoCs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220514102524.3188730-1-maz@kernel.org
The pVM-specific FP/SIMD trap handler just calls straight into the
generic trap handler. Avoid the indirection and just call the hyp
handler directly.
Note that the BUILD_BUG_ON() pattern is repeated in
pvm_init_traps_aa64pfr0(), which is likely a better home for it.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220509162559.2387784-2-oupton@google.com
Don't use begin-kernel-doc notation (/**) for comments that are not in
kernel-doc format.
This prevents these kernel-doc warnings:
arch/arm64/kvm/hyp/nvhe/switch.c:126: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Disable host events, enable guest events
arch/arm64/kvm/hyp/nvhe/switch.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Disable guest events, enable host events
arch/arm64/kvm/hyp/nvhe/switch.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Handler for protected VM restricted exceptions.
arch/arm64/kvm/hyp/nvhe/switch.c:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Handler for protected VM MSR, MRS or System instruction execution in AArch64.
arch/arm64/kvm/hyp/nvhe/switch.c:196: warning: Function parameter or member 'vcpu' not described in 'kvm_handle_pvm_fpsimd'
arch/arm64/kvm/hyp/nvhe/switch.c:196: warning: Function parameter or member 'exit_code' not described in 'kvm_handle_pvm_fpsimd'
arch/arm64/kvm/hyp/nvhe/switch.c:196: warning: expecting prototype for Handler for protected floating(). Prototype was for kvm_handle_pvm_fpsimd() instead
Fixes: 09cf57eba3 ("KVM: arm64: Split hyp/switch.c to VHE/nVHE")
Fixes: 1423afcb41 ("KVM: arm64: Trap access to pVM restricted features")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: David Brazdil <dbrazdil@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220430050123.2844-1-rdunlap@infradead.org
There are a few cases in the nVHE code where we take the absolute
address of a symbol via a literal pool entry, and subsequently translate
it to another address space (PA, kimg VA, kernel linear VA, etc).
Originally, this literal was needed because we relied on a different
translation for absolute references, but this is no longer the case, so
we can simply use relative addressing instead. This removes a couple of
RELA entries pointing into the .text segment.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220428140350.3303481-1-ardb@kernel.org
When a sysreg table entry is out-of-order, KVM attempts to print the
address of the table:
[ 0.143911] kvm [1]: sys_reg table (____ptrval____) out of order (1)
Printing the name of the table instead of a pointer is more helpful in this
case. The message has also been slightly tweaked to be point out the
offending entry (and to match the missing reset error message):
[ 0.143891] kvm [1]: sys_reg table sys_reg_descs+0x50/0x7490 entry 1 out of order
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220428103405.70884-3-alexandru.elisei@arm.com
To emulate a register access, KVM uses a table of registers sorted by
register encoding to speed up queries using binary search.
When Linux boots, KVM checks that the table is sorted and uses a BUG_ON()
statement to let the user know if it's not. The unfortunate side effect is
that an unsorted sysreg table brings down the whole kernel, not just KVM,
even though the rest of the kernel can function just fine without KVM. To
make matters worse, on machines which lack a serial console, the user is
left pondering why the machine is taking so long to boot.
Improve this situation by returning an error from kvm_arch_init() if the
sysreg tables are not in the correct order. The machine is still very much
usable for the user, with the exception of virtualization, who can now
easily determine what went wrong.
A minor typo has also been corrected in the check_sysreg_table() function.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220428103405.70884-2-alexandru.elisei@arm.com
Since adversising GICR_CTLR.{IC,CES} is directly observable from
a guest, we need to make it selectable from userspace.
For that, bump the default GICD_IIDR revision and let userspace
downgrade it to the previous default. For GICv2, the two distributor
revisions are strictly equivalent.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-5-maz@kernel.org
Since GICv4.1, it has become legal for an implementation to advertise
GICR_{INVLPIR,INVALLR,SYNCR} while having an ITS, allowing for a more
efficient invalidation scheme (no guest command queue contention when
multiple CPUs are generating invalidations).
Provide the invalidation registers as a primitive to their ITS
counterpart. Note that we don't advertise them to the guest yet
(the architecture allows an implementation to do this).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220405182327.205520-4-maz@kernel.org
When disabling LPIs, a guest needs to poll GICR_CTLR.RWP in order
to be sure that the write has taken effect. We so far reported it
as 0, as we didn't advertise that LPIs could be turned off the
first place.
Start tracking this state during which LPIs are being disabled,
and expose the 'in progress' state via the RWP bit.
We also take this opportunity to disallow enabling LPIs and programming
GICR_{PEND,PROP}BASER while LPI disabling is in progress, as allowed by
the architecture (UNPRED behaviour).
We don't advertise the feature to the guest yet (which is allowed by
the architecture).
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220405182327.205520-3-maz@kernel.org
* kvm-arm64/aarch32-idreg-trap:
: .
: Add trapping/sanitising infrastructure for AArch32 systen registers,
: allowing more control over what we actually expose (such as the PMU).
:
: Patches courtesy of Oliver and Alexandru.
: .
KVM: arm64: Fix new instances of 32bit ESRs
KVM: arm64: Hide AArch32 PMU registers when not available
KVM: arm64: Start trapping ID registers for 32 bit guests
KVM: arm64: Plumb cp10 ID traps through the AArch64 sysreg handler
KVM: arm64: Wire up CP15 feature registers to their AArch64 equivalents
KVM: arm64: Don't write to Rt unless sys_reg emulation succeeds
KVM: arm64: Return a bool from emulate_cp()
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/wfxt:
: .
: Add support for the WFET/WFIT instructions that provide the same
: service as WFE/WFI, only with a timeout.
: .
KVM: arm64: Expose the WFXT feature to guests
KVM: arm64: Offer early resume for non-blocking WFxT instructions
KVM: arm64: Handle blocking WFIT instruction
KVM: arm64: Introduce kvm_counter_compute_delta() helper
KVM: arm64: Simplify kvm_cpu_has_pending_timer()
arm64: Use WFxT for __delay() when possible
arm64: Add wfet()/wfit() helpers
arm64: Add HWCAP advertising FEAT_WFXT
arm64: Add RV and RN fields for ESR_ELx_WFx_ISS
arm64: Expand ESR_ELx_WFx_ISS_TI to match its ARMv8.7 definition
Signed-off-by: Marc Zyngier <maz@kernel.org>
ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND" describes a PSCI call that allows
software to request that a system be placed in the deepest possible
low-power state. Effectively, software can use this to suspend itself to
RAM.
Unfortunately, there really is no good way to implement a system-wide
PSCI call in KVM. Any precondition checks done in the kernel will need
to be repeated by userspace since there is no good way to protect a
critical section that spans an exit to userspace. SYSTEM_RESET and
SYSTEM_OFF are equally plagued by this issue, although no users have
seemingly cared for the relatively long time these calls have been
supported.
The solution is to just make the whole implementation userspace's
problem. Introduce a new system event, KVM_SYSTEM_EVENT_SUSPEND, that
indicates to userspace a calling vCPU has invoked PSCI SYSTEM_SUSPEND.
Additionally, add a CAP to get buy-in from userspace for this new exit
type.
Only advertise the SYSTEM_SUSPEND PSCI call if userspace has opted in.
If a vCPU calls SYSTEM_SUSPEND, punt straight to userspace. Provide
explicit documentation of userspace's responsibilites for the exit and
point to the PSCI specification to describe the actual PSCI call.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-8-oupton@google.com
Introduce a new MP state, KVM_MP_STATE_SUSPENDED, which indicates a vCPU
is in a suspended state. In the suspended state the vCPU will block
until a wakeup event (pending interrupt) is recognized.
Add a new system event type, KVM_SYSTEM_EVENT_WAKEUP, to indicate to
userspace that KVM has recognized one such wakeup event. It is the
responsibility of userspace to then make the vCPU runnable, or leave it
suspended until the next wakeup event.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-7-oupton@google.com
Depending on a fallthrough to the default case for hiding SYSTEM_RESET2
requires that any new case statements clean up the failure path for this
PSCI call.
Unhitch SYSTEM_RESET2 from the default case by setting val to
PSCI_RET_NOT_SUPPORTED outside of the switch statement. Apply the
cleanup to both the PSCI_1_1_FN_SYSTEM_RESET2 and
PSCI_1_0_FN_PSCI_FEATURES handlers.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-2-oupton@google.com
Fix the new instances of ESR being described as a u32, now that
we consistently are using a u64 for this register.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce the firmware register to hold the vendor specific
hypervisor service calls (owner value 6) as a bitmap. The
bitmap represents the features that'll be enabled for the
guest, as configured by the user-space. Currently, this
includes support for KVM-vendor features along with
reading the UID, represented by bit-0, and Precision Time
Protocol (PTP), represented by bit-1.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
[maz: tidy-up bitmap values]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-5-rananta@google.com
Introduce the firmware register to hold the standard hypervisor
service calls (owner value 5) as a bitmap. The bitmap represents
the features that'll be enabled for the guest, as configured by
the user-space. Currently, this includes support only for
Paravirtualized time, represented by bit-0.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
[maz: tidy-up bitmap values]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-4-rananta@google.com
