Pull x86 mm changes from Ingo Molnar:
"The main changes are: continued PAT work by Toshi Kani, plus a new
boot time warning about insecure RWX kernel mappings, by Stephen
Smalley.
The new CONFIG_DEBUG_WX=y warning is marked default-y if
CONFIG_DEBUG_RODATA=y is already eanbled, as a special exception, as
these bugs are hard to notice and this check already found several
live bugs"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Warn on W^X mappings
x86/mm: Fix no-change case in try_preserve_large_page()
x86/mm: Fix __split_large_page() to handle large PAT bit
x86/mm: Fix try_preserve_large_page() to handle large PAT bit
x86/mm: Fix gup_huge_p?d() to handle large PAT bit
x86/mm: Fix slow_virt_to_phys() to handle large PAT bit
x86/mm: Fix page table dump to show PAT bit
x86/asm: Add pud_pgprot() and pmd_pgprot()
x86/asm: Fix pud/pmd interfaces to handle large PAT bit
x86/asm: Add pud/pmd mask interfaces to handle large PAT bit
x86/asm: Move PUD_PAGE macros to page_types.h
x86/vdso32: Define PGTABLE_LEVELS to 32bit VDSO
Pull x86 sigcontext header cleanups from Ingo Molnar:
"This series reorganizes and cleans up various aspects of the main
sigcontext UAPI headers, such as unifying the data structures and
updating/adding lots of comments to explain all the ABI details and
quirks. The headers can now also be built in user-space standalone"
* 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Clean up too long lines
x86/headers: Remove <asm/sigcontext.h> references on the kernel side
x86/headers: Remove direct sigcontext32.h uses
x86/headers: Convert sigcontext_ia32 uses to sigcontext_32
x86/headers: Unify 'struct sigcontext_ia32' and 'struct sigcontext_32'
x86/headers: Make sigcontext pointers bit independent
x86/headers: Move the 'struct sigcontext' definitions into the UAPI header
x86/headers: Clean up the kernel's struct sigcontext types to be ABI-clean
x86/headers: Convert uses of _fpstate_ia32 to _fpstate_32
x86/headers: Unify 'struct _fpstate_ia32' and i386 struct _fpstate
x86/headers: Unify register type definitions between 32-bit compat and i386
x86/headers: Use ABI types consistently in sigcontext*.h
x86/headers: Separate out legacy user-space structure definitions
x86/headers: Clean up and better document uapi/asm/sigcontext.h
x86/headers: Clean up uapi/asm/sigcontext32.h
x86/headers: Fix (old) header file dependency bug in uapi/asm/sigcontext32.h
Pull x86 fpu changes from Ingo Molnar:
"There are two main areas of changes:
- Rework of the extended FPU state code to robustify the kernel's
usage of cpuid provided xstate sizes - and related changes (Dave
Hansen)"
- math emulation enhancements: new modern FPU instructions support,
with testcases, plus cleanups (Denys Vlasnko)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/fpu: Fixup uninitialized feature_name warning
x86/fpu/math-emu: Add support for FISTTP instructions
x86/fpu/math-emu, selftests: Add test for FISTTP instructions
x86/fpu/math-emu: Add support for FCMOVcc insns
x86/fpu/math-emu: Add support for F[U]COMI[P] insns
x86/fpu/math-emu: Remove define layer for undocumented opcodes
x86/fpu/math-emu, selftests: Add tests for FCMOV and FCOMI insns
x86/fpu/math-emu: Remove !NO_UNDOC_CODE
x86/fpu: Check CPU-provided sizes against struct declarations
x86/fpu: Check to ensure increasing-offset xstate offsets
x86/fpu: Correct and check XSAVE xstate size calculations
x86/fpu: Add C structures for AVX-512 state components
x86/fpu: Rework YMM definition
x86/fpu/mpx: Rework MPX 'xstate' types
x86/fpu: Add xfeature_enabled() helper instead of test_bit()
x86/fpu: Remove 'xfeature_nr'
x86/fpu: Rework XSTATE_* macros to remove magic '2'
x86/fpu: Rename XFEATURES_NR_MAX
x86/fpu: Rename XSAVE macros
x86/fpu: Remove partial LWP support definitions
...
Pull x86 kgdb fixlet from Ingo Molnar:
"A single debugging related commit: compress the memory usage of a kgdb
data structure"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kgdb: Replace bool_int_array[NR_CPUS] with bitmap
Pull x86 cpu changes from Ingo Molnar:
"Two changes in this cycle: a Kconfig help text enhancement, and an AMD
CLZERO instruction capability detection and enumeration"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add CLZERO detection
x86/Kconfig/cpus: Fix/complete CPU type help texts
Pull x86 cleanups from Ingo Molnar:
"An early_printk cleanup plus deinlining enhancements"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/early_printk: Set __iomem address space for IO
x86/signal: Deinline get_sigframe, save 240 bytes
x86: Deinline early_console_register, save 403 bytes
x86/e820: Deinline e820_type_to_string, save 126 bytes
Pull x86 boot cleanup from Ingo Molnar:
"A single commit: remove an obsolete kcrash boot flag"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kexec: Remove obsolete 'in_crash_kexec' flag
Both early_enable_events() and apply_trace_boot_options() parse a boot
string that may get parsed later on. They both use strsep() which converts a
comma into a nul character. To still allow the boot string to be parsed
again the same way, the nul character gets converted back to a comma after
the token is processed.
The problem is that these two functions check for an empty parameter (two
commas in a row ",,"), and continue the loop if the parameter is empty, but
fails to place the comma back. In this case, the second parsing will end at
this blank field, and not process fields afterward.
In most cases, users should not have an empty field, but if its going to be
checked, the code might as well be correct.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull x86 asm changes from Ingo Molnar:
"The main change in this cycle is another step in the big x86 system
call interface rework by Andy Lutomirski, which moves most of the low
level x86 entry code from assembly to C, for all syscall entries
except native 64-bit system calls:
arch/x86/entry/entry_32.S | 182 ++++------
arch/x86/entry/entry_64_compat.S | 547 ++++++++-----------------------
194 insertions(+), 535 deletions(-)
... our hope is that the final remaining step (converting native
64-bit system calls) will be less painful as all the previous steps,
given that most of the legacies and quirks are concentrated around
native 32-bit and compat environments"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/entry/32: Fix FS and GS restore in opportunistic SYSEXIT
x86/entry/32: Fix entry_INT80_32() to expect interrupts to be on
um/x86: Fix build after x86 syscall changes
x86/asm: Remove the xyz_cfi macros from dwarf2.h
selftests/x86: Style fixes for the 'unwind_vdso' test
x86/entry/64/compat: Document sysenter_fix_flags's reason for existence
x86/entry: Split and inline syscall_return_slowpath()
x86/entry: Split and inline prepare_exit_to_usermode()
x86/entry: Use pt_regs_to_thread_info() in syscall entry tracing
x86/entry: Hide two syscall entry assertions behind CONFIG_DEBUG_ENTRY
x86/entry: Micro-optimize compat fast syscall arg fetch
x86/entry: Force inlining of 32-bit syscall code
x86/entry: Make irqs_disabled checks in exit code depend on lockdep
x86/entry: Remove unnecessary IRQ twiddling in fast 32-bit syscalls
x86/asm: Remove thread_info.sysenter_return
x86/entry/32: Re-implement SYSENTER using the new C path
x86/entry/32: Switch INT80 to the new C syscall path
x86/entry/32: Open-code return tracking from fork and kthreads
x86/entry/compat: Implement opportunistic SYSRETL for compat syscalls
x86/vdso/compat: Wire up SYSENTER and SYSCSALL for compat userspace
...
Currently, the trace_options parameter is only applied in
tracer_alloc_buffers() when global_trace.current_trace is nop_trace,
so a tracer specific option will not be applied even when the specific
tracer is also enabled from kernel command line. For example, the
'func_stack_trace' option can't be enabled with the following kernel
parameter:
ftrace=function ftrace_filter=kfree trace_options=func_stack_trace
We can enable tracer specific options by simply apply the options again
if the specific tracer is also supplied from command line and started
in register_tracer().
To make trace_boot_options_buf can be parsed again, a comma and a space
is put back if they were replaced by strsep and strstrip respectively.
Also make register_tracer() be __init to access the __init data, and
in fact register_tracer is only called from __init code.
Link: http://lkml.kernel.org/r/1446599669-9294-1-git-send-email-hello.wjx@gmail.com
Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull x86 apic changes from Ingo Molnar:
"The main changes in this cycle were:
- Numachip updates: new hardware support, fixes and cleanups.
(Daniel J Blueman)
- misc smaller cleanups and fixlets"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/io_apic: Make eoi_ioapic_pin() static
x86/irq: Drop unlikely before IS_ERR_OR_NULL
x86/x2apic: Make stub functions available even if !CONFIG_X86_LOCAL_APIC
x86/apic: Deinline various functions
x86/numachip: Fix timer build conflict
x86/numachip: Introduce Numachip2 timer mechanisms
x86/numachip: Add Numachip IPI optimisations
x86/numachip: Add Numachip2 APIC support
x86/numachip: Cleanup Numachip support
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle were:
- sched/fair load tracking fixes and cleanups (Byungchul Park)
- Make load tracking frequency scale invariant (Dietmar Eggemann)
- sched/deadline updates (Juri Lelli)
- stop machine fixes, cleanups and enhancements for bugs triggered by
CPU hotplug stress testing (Oleg Nesterov)
- scheduler preemption code rework: remove PREEMPT_ACTIVE and related
cleanups (Peter Zijlstra)
- Rework the sched_info::run_delay code to fix races (Peter Zijlstra)
- Optimize per entity utilization tracking (Peter Zijlstra)
- ... misc other fixes, cleanups and smaller updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS
sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop()
sched: Start stopper early
stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark()
stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark()
stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled
stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works()
stop_machine: Ensure that a queued callback will be called before cpu_stop_park()
sched/x86: Fix typo in __switch_to() comments
sched/core: Remove a parameter in the migrate_task_rq() function
sched/core: Drop unlikely behind BUG_ON()
sched/core: Fix task and run queue sched_info::run_delay inconsistencies
sched/numa: Fix task_tick_fair() from disabling numa_balancing
sched/core: Add preempt_count invariant check
sched/core: More notrace annotations
sched/core: Kill PREEMPT_ACTIVE
sched/core, sched/x86: Kill thread_info::saved_preempt_count
sched/core: Simplify preempt_count tests
sched/core: Robustify preemption leak checks
sched/core: Stop setting PREEMPT_ACTIVE
...
Pull RAS changes from Ingo Molnar:
"The main system reliability related changes were from x86, but also
some generic RAS changes:
- AMD MCE error injection subsystem enhancements. (Aravind
Gopalakrishnan)
- Fix MCE and CPU hotplug interaction bug. (Ashok Raj)
- kcrash bootup robustness fix. (Baoquan He)
- kcrash cleanups. (Borislav Petkov)
- x86 microcode driver rework: simplify it by unmodularizing it and
other cleanups. (Borislav Petkov)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/mce: Add a default case to the switch in __mcheck_cpu_ancient_init()
x86/mce: Add a Scalable MCA vendor flags bit
MAINTAINERS: Unify the microcode driver section
x86/microcode/intel: Move #ifdef DEBUG inside the function
x86/microcode/amd: Remove maintainers from comments
x86/microcode: Remove modularization leftovers
x86/microcode: Merge the early microcode loader
x86/microcode: Unmodularize the microcode driver
x86/mce: Fix thermal throttling reporting after kexec
kexec/crash: Say which char is the unrecognized
x86/setup/crash: Check memblock_reserve() retval
x86/setup/crash: Cleanup some more
x86/setup/crash: Remove alignment variable
x86/setup: Cleanup crashkernel reservation functions
x86/amd_nb, EDAC: Rename amd_get_node_id()
x86/setup: Do not reserve crashkernel high memory if low reservation failed
x86/microcode/amd: Do not overwrite final patch levels
x86/microcode/amd: Extract current patch level read to a function
x86/ras/mce_amd_inj: Inject bank 4 errors on the NBC
x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts
...
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Improve accuracy of perf/sched clock on x86. (Adrian Hunter)
- Intel DS and BTS updates. (Alexander Shishkin)
- Intel cstate PMU support. (Kan Liang)
- Add group read support to perf_event_read(). (Peter Zijlstra)
- Branch call hardware sampling support, implemented on x86 and
PowerPC. (Stephane Eranian)
- Event groups transactional interface enhancements. (Sukadev
Bhattiprolu)
- Enable proper x86/intel/uncore PMU support on multi-segment PCI
systems. (Taku Izumi)
- ... misc fixes and cleanups.
The perf tooling team was very busy again with 200+ commits, the full
diff doesn't fit into lkml size limits. Here's an (incomplete) list
of the tooling highlights:
New features:
- Change the default event used in all tools (record/top): use the
most precise "cycles" hw counter available, i.e. when the user
doesn't specify any event, it will try using cycles:ppp, cycles:pp,
etc and fall back transparently until it finds a working counter.
(Arnaldo Carvalho de Melo)
- Integration of perf with eBPF that, given an eBPF .c source file
(or .o file built for the 'bpf' target with clang), will get it
automatically built, validated and loaded into the kernel via the
sys_bpf syscall, which can then be used and seen using 'perf trace'
and other tools.
(Wang Nan)
Various user interface improvements:
- Automatic pager invocation on long help output. (Namhyung Kim)
- Search for more options when passing args to -h, e.g.: (Arnaldo
Carvalho de Melo)
$ perf report -h interface
Usage: perf report [<options>]
--gtk Use the GTK2 interface
--stdio Use the stdio interface
--tui Use the TUI interface
- Show ordered command line options when -h is used or when an
unknown option is specified. (Arnaldo Carvalho de Melo)
- If options are passed after -h, show just its descriptions, not all
options. (Arnaldo Carvalho de Melo)
- Implement column based horizontal scrolling in the hists browser
(top, report), making it possible to use the TUI for things like
'perf mem report' where there are many more columns than can fit in
a terminal. (Arnaldo Carvalho de Melo)
- Enhance the error reporting of tracepoint event parsing, e.g.:
$ oldperf record -e sched:sched_switc usleep 1
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Run 'perf list' for a list of valid events
Now we get the much nicer:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/sched/sched_switc
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
And after we have those mount point permissions fixed:
$ perf record -e sched:sched_switc ls
event syntax error: 'sched:sched_switc'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing/events/sched/sched_switc not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
I.e. basically now the event parsing routing uses the strerror_open()
routines introduced by and used in 'perf trace' work. (Jiri Olsa)
- Fail properly when pattern matching fails to find a tracepoint,
i.e. '-e non:existent' was being correctly handled, with a proper
error message about that not being a valid event, but '-e
non:existent*' wasn't, fix it. (Jiri Olsa)
- Do event name substring search as last resort in 'perf list'.
(Arnaldo Carvalho de Melo)
E.g.:
# perf list clock
List of pre-defined events (to be used in -e):
cpu-clock [Software event]
task-clock [Software event]
uncore_cbox_0/clockticks/ [Kernel PMU event]
uncore_cbox_1/clockticks/ [Kernel PMU event]
kvm:kvm_pvclock_update [Tracepoint event]
kvm:kvm_update_master_clock [Tracepoint event]
power:clock_disable [Tracepoint event]
power:clock_enable [Tracepoint event]
power:clock_set_rate [Tracepoint event]
syscalls:sys_enter_clock_adjtime [Tracepoint event]
syscalls:sys_enter_clock_getres [Tracepoint event]
syscalls:sys_enter_clock_gettime [Tracepoint event]
syscalls:sys_enter_clock_nanosleep [Tracepoint event]
syscalls:sys_enter_clock_settime [Tracepoint event]
syscalls:sys_exit_clock_adjtime [Tracepoint event]
syscalls:sys_exit_clock_getres [Tracepoint event]
syscalls:sys_exit_clock_gettime [Tracepoint event]
syscalls:sys_exit_clock_nanosleep [Tracepoint event]
syscalls:sys_exit_clock_settime [Tracepoint event]
Intel PT hardware tracing enhancements:
- Accept a zero --itrace period, meaning "as often as possible". In
the case of Intel PT that is the same as a period of 1 and a unit
of 'instructions' (i.e. --itrace=i1i). (Adrian Hunter)
- Harmonize itrace's synthesized callchains with the existing
--max-stack tool option. (Adrian Hunter)
- Allow time to be displayed in nanoseconds in 'perf script'.
(Adrian Hunter)
- Fix potential infinite loop when handling Intel PT timestamps.
(Adrian Hunter)
- Slighly improve Intel PT debug logging. (Adrian Hunter)
- Warn when AUX data has been lost, just like when processing
PERF_RECORD_LOST. (Adrian Hunter)
- Further document export-to-postgresql.py script. (Adrian Hunter)
- Add option to synthesize branch stack from auxtrace data. (Adrian
Hunter)
Misc notable changes:
- Switch the default callchain output mode to 'graph,0.5,caller', to
make it look like the default for other tools, reducing the
learning curve for people used to 'caller' based viewing. (Arnaldo
Carvalho de Melo)
- various call chain usability enhancements. (Namhyung Kim)
- Introduce the 'P' event modifier, meaning 'max precision level,
please', i.e.:
$ perf record -e cycles:P usleep 1
Is now similar to:
$ perf record usleep 1
Useful, for instance, when specifying multiple events. (Jiri Olsa)
- Add 'socket' sort entry, to sort by the processor socket in 'perf
top' and 'perf report'. (Kan Liang)
- Introduce --socket-filter to 'perf report', for filtering by
processor socket. (Kan Liang)
- Add new "Zoom into Processor Socket" operation in the perf hists
browser, used in 'perf top' and 'perf report'. (Kan Liang)
- Allow probing on kmodules without DWARF. (Masami Hiramatsu)
- Fix 'perf probe -l' for probes added to kernel module functions.
(Masami Hiramatsu)
- Preparatory work for the 'perf stat record' feature that will allow
generating perf.data files with counting data in addition to the
sampling mode we have now (Jiri Olsa)
- Update libtraceevent KVM plugin. (Paolo Bonzini)
- ... plus lots of other enhancements that I failed to list properly,
by: Adrian Hunter, Alexander Shishkin, Andi Kleen, Andrzej Hajda,
Arnaldo Carvalho de Melo, Dima Kogan, Don Zickus, Geliang Tang, He
Kuang, Huaitong Han, Ingo Molnar, Jan Stancek, Jiri Olsa, Kan
Liang, Kirill Tkhai, Masami Hiramatsu, Matt Fleming, Namhyung Kim,
Paolo Bonzini, Peter Zijlstra, Rabin Vincent, Scott Wood, Stephane
Eranian, Sukadev Bhattiprolu, Taku Izumi, Vaishali Thakkar, Wang
Nan, Yang Shi and Yunlong Song"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (260 commits)
perf unwind: Pass symbol source to libunwind
tools build: Fix libiberty feature detection
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event
perf record: Add clang options for compiling BPF scripts
perf bpf: Attach eBPF filter to perf event
perf tools: Make sure fixdep is built before libbpf
perf script: Enable printing of branch stack
perf trace: Add cmd string table to decode sys_bpf first arg
perf bpf: Collect perf_evsel in BPF object files
perf tools: Load eBPF object into kernel
perf tools: Create probe points for BPF programs
perf tools: Enable passing bpf object file to --event
perf ebpf: Add the libbpf glue
perf tools: Make perf depend on libbpf
perf symbols: Fix endless loop in dso__split_kallsyms_for_kcore
perf tools: Enable pre-event inherit setting by config terms
perf symbols: we can now read separate debug-info files based on a build ID
perf symbols: Fix type error when reading a build-id
perf tools: Search for more options when passing args to -h
perf stat: Cache aggregated map entries in extra cpumap
...
This seems to be a mis-reading of how alpha memory ordering works, and
is not backed up by the alpha architecture manual. The helper functions
don't do anything special on any other architectures, and the arguments
that support them being safe on other architectures also argue that they
are safe on alpha.
Basically, the "control dependency" is between a previous read and a
subsequent write that is dependent on the value read. Even if the
subsequent write is actually done speculatively, there is no way that
such a speculative write could be made visible to other cpu's until it
has been committed, which requires validating the speculation.
Note that most weakely ordered architectures (very much including alpha)
do not guarantee any ordering relationship between two loads that depend
on each other on a control dependency:
read A
if (val == 1)
read B
because the conditional may be predicted, and the "read B" may be
speculatively moved up to before reading the value A. So we require the
user to insert a smp_rmb() between the two accesses to be correct:
read A;
if (A == 1)
smp_rmb()
read B
Alpha is further special in that it can break that ordering even if the
*address* of B depends on the read of A, because the cacheline that is
read later may be stale unless you have a memory barrier in between the
pointer read and the read of the value behind a pointer:
read ptr
read offset(ptr)
whereas all other weakly ordered architectures guarantee that the data
dependency (as opposed to just a control dependency) will order the two
accesses. As a result, alpha needs a "smp_read_barrier_depends()" in
between those two reads for them to be ordered.
The coontrol dependency that "READ_ONCE_CTRL()" and "atomic_read_ctrl()"
had was a control dependency to a subsequent *write*, however, and
nobody can finalize such a subsequent write without having actually done
the read. And were you to write such a value to a "stale" cacheline
(the way the unordered reads came to be), that would seem to lose the
write entirely.
So the things that make alpha able to re-order reads even more
aggressively than other weak architectures do not seem to be relevant
for a subsequent write. Alpha memory ordering may be strange, but
there's no real indication that it is *that* strange.
Also, the alpha architecture reference manual very explicitly talks
about the definition of "Dependence Constraints" in section 5.6.1.7,
where a preceding read dominates a subsequent write.
Such a dependence constraint admittedly does not impose a BEFORE (alpha
architecture term for globally visible ordering), but it does guarantee
that there can be no "causal loop". I don't see how you could avoid
such a loop if another cpu could see the stored value and then impact
the value of the first read. Put another way: the read and the write
could not be seen as being out of order wrt other cpus.
So I do not see how these "x_ctrl()" functions can currently be necessary.
I may have to eat my words at some point, but in the absense of clear
proof that alpha actually needs this, or indeed even an explanation of
how alpha could _possibly_ need it, I do not believe these functions are
called for.
And if it turns out that alpha really _does_ need a barrier for this
case, that barrier still should not be "smp_read_barrier_depends()".
We'd have to make up some new speciality barrier just for alpha, along
with the documentation for why it really is necessary.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul E McKenney <paulmck@us.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull locking changes from Ingo Molnar:
"The main changes in this cycle were:
- More gradual enhancements to atomic ops: new atomic*_read_ctrl()
ops, synchronize atomic_{read,set}() ordering requirements between
architectures, add atomic_long_t bitops. (Peter Zijlstra)
- Add _{relaxed|acquire|release}() variants for inc/dec atomics and
use them in various locking primitives: mutex, rtmutex, mcs, rwsem.
This enables weakly ordered architectures (such as arm64) to make
use of more locking related optimizations. (Davidlohr Bueso)
- Implement atomic[64]_{inc,dec}_relaxed() on ARM. (Will Deacon)
- Futex kernel data cache footprint micro-optimization. (Rasmus
Villemoes)
- pvqspinlock runtime overhead micro-optimization. (Waiman Long)
- misc smaller fixlets"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM, locking/atomics: Implement _relaxed variants of atomic[64]_{inc,dec}
locking/rwsem: Use acquire/release semantics
locking/mcs: Use acquire/release semantics
locking/rtmutex: Use acquire/release semantics
locking/mutex: Use acquire/release semantics
locking/asm-generic: Add _{relaxed|acquire|release}() variants for inc/dec atomics
atomic: Implement atomic_read_ctrl()
atomic, arch: Audit atomic_{read,set}()
atomic: Add atomic_long_t bitops
futex: Force hot variables into a single cache line
locking/pvqspinlock: Kick the PV CPU unconditionally when _Q_SLOW_VAL
locking/osq: Relax atomic semantics
locking/qrwlock: Rename ->lock to ->wait_lock
locking/Documentation/lockstat: Fix typo - lokcing -> locking
locking/atomics, cmpxchg: Privatize the inclusion of asm/cmpxchg.h
Pull RCU changes from Ingo Molnar:
"The main changes in this cycle were:
- Improvements to expedited grace periods (Paul E McKenney)
- Performance improvements to and locktorture tests for percpu-rwsem
(Oleg Nesterov, Paul E McKenney)
- Torture-test changes (Paul E McKenney, Davidlohr Bueso)
- Documentation updates (Paul E McKenney)
- Miscellaneous fixes (Paul E McKenney, Boqun Feng, Oleg Nesterov,
Patrick Marlier)"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
fs/writeback, rcu: Don't use list_entry_rcu() for pointer offsetting in bdi_split_work_to_wbs()
rcu: Better hotplug handling for synchronize_sched_expedited()
rcu: Enable stall warnings for synchronize_rcu_expedited()
rcu: Add tasks to expedited stall-warning messages
rcu: Add online/offline info to expedited stall warning message
rcu: Consolidate expedited CPU selection
rcu: Prepare for consolidating expedited CPU selection
cpu: Remove try_get_online_cpus()
rcu: Stop excluding CPU hotplug in synchronize_sched_expedited()
rcu: Stop silencing lockdep false positive for expedited grace periods
rcu: Switch synchronize_sched_expedited() to IPI
locktorture: Fix module unwind when bad torture_type specified
torture: Forgive non-plural arguments
rcutorture: Fix unused-function warning for torturing_tasks()
rcutorture: Fix module unwind when bad torture_type specified
rcu_sync: Cleanup the CONFIG_PROVE_RCU checks
locking/percpu-rwsem: Clean up the lockdep annotations in percpu_down_read()
locking/percpu-rwsem: Fix the comments outdated by rcu_sync
locking/percpu-rwsem: Make use of the rcu_sync infrastructure
locking/percpu-rwsem: Make percpu_free_rwsem() after kzalloc() safe
...
Pull EFI changes from Ingo Molnar:
"The main changes in this cycle were:
- further EFI code generalization to make it more workable for ARM64
- various extensions, such as 64-bit framebuffer address support,
UEFI v2.5 EFI_PROPERTIES_TABLE support
- code modularization simplifications and cleanups
- new debugging parameters
- various fixes and smaller additions"
* 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
efi: Fix warning of int-to-pointer-cast on x86 32-bit builds
efi: Use correct type for struct efi_memory_map::phys_map
x86/efi: Fix kernel panic when CONFIG_DEBUG_VIRTUAL is enabled
efi: Add "efi_fake_mem" boot option
x86/efi: Rename print_efi_memmap() to efi_print_memmap()
efi: Auto-load the efi-pstore module
efi: Introduce EFI_NX_PE_DATA bit and set it from properties table
efi: Add support for UEFIv2.5 Properties table
efi: Add EFI_MEMORY_MORE_RELIABLE support to efi_md_typeattr_format()
efifb: Add support for 64-bit frame buffer addresses
efi/arm64: Clean up efi_get_fdt_params() interface
arm64: Use core efi=debug instead of uefi_debug command line parameter
efi/x86: Move efi=debug option parsing to core
drivers/firmware: Make efi/esrt.c driver explicitly non-modular
efi: Use the generic efi.memmap instead of 'memmap'
acpi/apei: Use appropriate pgprot_t to map GHES memory
arm64, acpi/apei: Implement arch_apei_get_mem_attributes()
arm64/mm: Add PROT_DEVICE_nGnRnE and PROT_NORMAL_WT
acpi, x86: Implement arch_apei_get_mem_attributes()
efi, x86: Rearrange efi_mem_attributes()
...
Pull wchan kernel address hiding from Ingo Molnar:
"This fixes a wchan related information leak in /proc/PID/stat.
There's a bit of an ABI twist to it: instead of setting the wchan
field to 0 (which is our usual technique) we set it conditionally to a
0/1 flag to keep ABI compatibility with older procps versions that
only fetches /proc/PID/wchan (symbolic names) if the absolute wchan
address is nonzero"
* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/proc, core/debug: Don't expose absolute kernel addresses via wchan
"nlb_pr_rq" can't be more than u32 because "len" is a u32. Later we
truncate it to u32 anyway when we calculate min_t().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull irq updates from Thomas Gleixner:
"The irq departement delivers:
- Rework the irqdomain core infrastructure to accomodate ACPI based
systems. This is required to support ARM64 without creating
artificial device tree nodes.
- Sanitize the ACPI based ARM GIC initialization by making use of the
new firmware independent irqdomain core
- Further improvements to the generic MSI management
- Generalize the irq migration on CPU hotplug
- Improvements to the threaded interrupt infrastructure
- Allow the migration of "chained" low level interrupt handlers
- Allow optional force masking of interrupts in disable_irq[_nosysnc]
- Support for two new interrupt chips - Sigh!
- A larger set of errata fixes for ARM gicv3
- The usual pile of fixes, updates, improvements and cleanups all
over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
Document that IRQ_NONE should be returned when IRQ not actually handled
PCI/MSI: Allow the MSI domain to be device-specific
PCI: Add per-device MSI domain hook
of/irq: Use the msi-map property to provide device-specific MSI domain
of/irq: Split of_msi_map_rid to reuse msi-map lookup
irqchip/gic-v3-its: Parse new version of msi-parent property
PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing
of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing
of/irq: Add support code for multi-parent version of "msi-parent"
irqchip/gic-v3-its: Add handling of PCI requester id.
PCI/MSI: Add helper function pci_msi_domain_get_msi_rid().
of/irq: Add new function of_msi_map_rid()
Docs: dt: Add PCI MSI map bindings
irqchip/gic-v2m: Add support for multiple MSI frames
irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec
irqchip/mxs: Add Alphascale ASM9260 support
irqchip/mxs: Prepare driver for hardware with different offsets
irqchip/mxs: Panic if ioremap or domain creation fails
irqdomain: Documentation updates
irqdomain/msi: Use fwnode instead of of_node
...
Pull timer updates from Thomas Gleixner:
"The timer departement provides:
- More y2038 work in the area of ntp and pps.
- Optimization of posix cpu timers
- New time related selftests
- Some new clocksource drivers
- The usual pile of fixes, cleanups and improvements"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
timeconst: Update path in comment
timers/x86/hpet: Type adjustments
clocksource/drivers/armada-370-xp: Implement ARM delay timer
clocksource/drivers/tango_xtal: Add new timer for Tango SoCs
clocksource/drivers/imx: Allow timer irq affinity change
clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr()
clocksource/drivers/h8300_*: Remove unneeded memset()s
clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()
clocksource/drivers/em_sti: Remove unneeded memset()s
clocksource/drivers/mediatek: Use GPT as sched clock source
clockevents/drivers/mtk: Fix spurious interrupt leading to crash
posix_cpu_timer: Reduce unnecessary sighand lock contention
posix_cpu_timer: Convert cputimer->running to bool
posix_cpu_timer: Check thread timers only when there are active thread timers
posix_cpu_timer: Optimize fastpath_timer_check()
timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments
timers: Use __fls in apply_slack()
clocksource: Remove return statement from void functions
net: sfc: avoid using timespec
ntp/pps: use y2038 safe types in pps_event_time
...
Pull ARM updates from Russell King:
"In this ARM merge, we remove more lines than we add. Changes include:
- Enable imprecise aborts early, so that bus errors aren't masked
until later in the boot. This has the side effect that boot
loaders which provoke these aborts can cause the kernel to crash
early in boot, so we install a handler to report this event around
the site where these are enabled.
- Remove the buggy but impossible to enable cmpxchg syscall code.
- Add unwinding annotations to some assembly code.
- Add support for atomic half-word exchange for ARMv6k+.
- Reduce ioremap() alignment for SMP/LPAE cases where we don't need
the large alignment.
- Addition of an "optimal" 3G configuration for systems with 1G of
RAM.
- Increase vmalloc space by 128M.
- Constify some SMP operations structures, which have never been
writable.
- Improve ARMs dma_mmap() support for mapping DMA coherent mappings
into userspace.
- Fix to the NMI backtrace code in the IPI case on ARM where the
failing CPU gets stuck for 10s waiting for its own IPI to be
delivered.
- Removal of legacy PM support from the AMBA bus driver.
- Another fix for the previous fix of vdsomunge"
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (23 commits)
ARM: 8449/1: fix bug in vdsomunge swab32 macro
arm: add missing of_node_put
ARM: 8447/1: catch pending imprecise abort on unmask
ARM: 8446/1: amba: Remove unused callbacks for legacy system PM
ARM: 8443/1: Adding support for atomic half word exchange
ARM: clean up TWD after previous patch
ARM: 8441/2: twd: Don't set CLOCK_EVT_FEAT_C3STOP unconditionally
ARM: 8440/1: remove obsolete documentation
ARM: make highpte an expert option
ARM: 8433/1: add a VMSPLIT_3G_OPT config option
ARM: 8439/1: Fix backtrace generation when IPI is masked
ARM: 8428/1: kgdb: Fix registers on sleeping tasks
ARM: 8427/1: dma-mapping: add support for offset parameter in dma_mmap()
ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()
ARM: remove user cmpxchg syscall
ARM: 8438/1: Add unwinding to __clear_user_std()
ARM: 8436/1: hw_breakpoint: remove unnecessary header
ARM: 8434/2: Revert "7655/1: smp_twd: make twd_local_timer_of_register() no-op for nosmp"
ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000
ARM: 8430/1: use default ioremap alignment for SMP or LPAE
...
Some generic THP bits are touched - all ACKed by Kirill
- Platform framework updates to prepare for EZChip arrival (still in works)
- ARC Public Mailing list setup finally (linux-snps-arc@lists.infraded.org)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=H+Sl
-----END PGP SIGNATURE-----
Merge tag 'arc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- Support for new MM features in ARCv2 cores (THP, PAE40) Some generic
THP bits are touched - all ACKed by Kirill
- Platform framework updates to prepare for EZChip arrival (still in works)
- ARC Public Mailing list setup finally (linux-snps-arc@lists.infraded.org)
* tag 'arc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (42 commits)
ARC: mm: PAE40 support
ARC: mm: PAE40: tlbex.S: Explicitify the size of pte_t
ARC: mm: PAE40: switch to using phys_addr_t for physical addresses
ARC: mm: HIGHMEM: populate high memory from DT
ARC: mm: HIGHMEM: kmap API implementation
ARC: mm: preps ahead of HIGHMEM support #2
ARC: mm: preps ahead of HIGHMEM support
ARC: mm: use generic macros _BITUL()/_AC()
ARC: mm: Improve Duplicate PD Fault handler
MAINTAINERS: Add public mailing list for ARC
ARC: Ensure DT mem base is same as what kernel is built with
ARC: boot: Non Master cpus only need to call EARLY_CPU_SETUP once
ARCv2: smp: [plat-*]: No need to explicitly call mcip_init_smp()
ARC: smp: Introduce smp hook @init_irq_cpu called for all cores
ARC: smp: Rename platform hook @init_smp -> @init_cpu_smp
ARCv2: smp: [plat-*]: No need to explicitly call mcip_init_early_smp()
ARC: smp: Introduce smp hook @init_early_smp for Master core
ARC: remove @init_time, @init_irq platform callbacks
ARC: smp: irqchip: handle IPI as percpu irq like timer
ARC: boot: Support Halt-on-reset and Run-on-reset SMP booting modes
...
wake_up_process() has a memory barrier before doing anything, thus adding a
memory barrier before calling it is redundant.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAlY3tC4ACgkQ31LbvUHyf1f/sgCeMpoZMTPgFTeBWCQDtp6zF6Fz
0YUAn22qMO9dlLVzKYaCoBWXd36tXnp3
=NVeF
-----END PGP SIGNATURE-----
Merge tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
Pull CRIS changes from Jesper Nilsson:
"Mostly another batch of code removal due to move to standard
frameworks for CRISv32, initial devicetree configuration for a couple
of boards, and some small fixes for kgdb and time handling"
* tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
cris: Drop reference to get_cmos_time()
CRIS: Drop code related to obsolete or unused kconfigs
cris: time: Cleanup of persistent clock stuff
cris: re-use helpers to dump data in hex format
CRIS v32: remove old GPIO and LEDs code
CRIS v32: remove I2C bitbanging driver
CRIS v32: add ARTPEC-3 and P1343 device trees
CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensor
CRIS: add dt-bindings symlink
CRIS v32: increase NR_IRQS
cris: arch-v10: kgdb: Add '__used' for static variable is_dyn_brkp
cris: arch-v10: kgdb: Use BAR instead of DTP0 for register P12
cris: kgdb: use native hex2bin
We don't init iter->started when dumping the ftrace buffer, and there's no
real need to do so - so allow skipping that check if the iter doesn't have
an initialized ->started cpumask.
Link: http://lkml.kernel.org/r/1441385156-27279-1-git-send-email-sasha.levin@oracle.com
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The commit b44754d826 ("ring_buffer: Allow to exit the ring
buffer benchmark immediately") added a hack into ring_buffer_producer()
that set @kill_test when kthread_should_stop() returned true. It improved
the situation a lot. It stopped the kthread in most cases because
the producer spent most of the time in the patched while cycle.
But there are still few possible races when kthread_should_stop()
is set outside of the cycle. Then we do not set @kill_test and
some other checks pass.
This patch adds a better fix. It renames @test_kill/TEST_KILL() into
a better descriptive @test_error/TEST_ERROR(). Also it introduces
break_test() function that checks for both @test_error and
kthread_should_stop().
The new function is used in the producer when the check for @test_error
is not enough. It is not used in the consumer because its state
is manipulated by the producer via the "reader_finish" variable.
Also we add a missing check into ring_buffer_producer_thread()
between setting TASK_INTERRUPTIBLE and calling schedule_timeout().
Otherwise, we might miss a wakeup from kthread_stop().
Link: http://lkml.kernel.org/r/1441629518-32712-3-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It seems that complete(&read_done) might be called too early
in some situations.
1st scenario:
-------------
CPU0 CPU1
ring_buffer_producer_thread()
wake_up_process(consumer);
wait_for_completion(&read_start);
ring_buffer_consumer_thread()
complete(&read_start);
ring_buffer_producer()
# producing data in
# the do-while cycle
ring_buffer_consumer();
# reading data
# got error
# set kill_test = 1;
set_current_state(
TASK_INTERRUPTIBLE);
if (reader_finish) # false
schedule();
# producer still in the middle of
# do-while cycle
if (consumer && !(cnt % wakeup_interval))
wake_up_process(consumer);
# spurious wakeup
while (!reader_finish &&
!kill_test)
# leaving because
# kill_test == 1
reader_finish = 0;
complete(&read_done);
1st BANG: We might access uninitialized "read_done" if this is the
the first round.
# producer finally leaving
# the do-while cycle because kill_test == 1;
if (consumer) {
reader_finish = 1;
wake_up_process(consumer);
wait_for_completion(&read_done);
2nd BANG: This will never complete because consumer already did
the completion.
2nd scenario:
-------------
CPU0 CPU1
ring_buffer_producer_thread()
wake_up_process(consumer);
wait_for_completion(&read_start);
ring_buffer_consumer_thread()
complete(&read_start);
ring_buffer_producer()
# CPU3 removes the module <--- difference from
# and stops producer <--- the 1st scenario
if (kthread_should_stop())
kill_test = 1;
ring_buffer_consumer();
while (!reader_finish &&
!kill_test)
# kill_test == 1 => we never go
# into the top level while()
reader_finish = 0;
complete(&read_done);
# producer still in the middle of
# do-while cycle
if (consumer && !(cnt % wakeup_interval))
wake_up_process(consumer);
# spurious wakeup
while (!reader_finish &&
!kill_test)
# leaving because kill_test == 1
reader_finish = 0;
complete(&read_done);
BANG: We are in the same "bang" situations as in the 1st scenario.
Root of the problem:
--------------------
ring_buffer_consumer() must complete "read_done" only when "reader_finish"
variable is set. It must not be skipped due to other conditions.
Note that we still must keep the check for "reader_finish" in a loop
because there might be spurious wakeups as described in the
above scenarios.
Solution:
----------
The top level cycle in ring_buffer_consumer() will finish only when
"reader_finish" is set. The data will be read in "while-do" cycle
so that they are not read after an error (kill_test == 1)
or a spurious wake up.
In addition, "reader_finish" is manipulated by the producer thread.
Therefore we add READ_ONCE() to make sure that the fresh value is
read in each cycle. Also we add the corresponding barrier
to synchronize the sleep check.
Next we set the state back to TASK_RUNNING for the situation where we
did not sleep.
Just from paranoid reasons, we initialize both completions statically.
This is safer, in case there are other races that we are unaware of.
As a side effect we could remove the memory barrier from
ring_buffer_producer_thread(). IMHO, this was the reason for
the barrier. ring_buffer_reset() uses spin locks that should
provide the needed memory barrier for using the buffer.
Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull m68k update from Geert Uytterhoeven.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/sun3: Use %pM format specifier to print ethernet address
- Add 'invert' sysfs attribute to the heartbeat trigger.
- Add Device Tree support to the leds-netxbig driver and add
related DT nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts
files. Remove static LED setup from the related board files.
- Remove redundant brightness conversion operation from leds-netxbig.
- Improve leds-bcm6328 driver: improve default-state handling, add more
init configuration options, print invalid LED instead of warning only
about maximum LED value.
- Add a shutdown function for setting gpio-leds into off state
when shutting down.
- Fix DT flash timeout property naming in leds-aat1290.txt.
- Switch to using devm prefixed version of led_classdev_register()
(leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro,
leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx,
leds-wrap).
- Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328,
leds-88pm860x).
- Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=X8+e
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
- Move the out-of-LED-tree led-sead3 driver to the LED subsystem.
- Add 'invert' sysfs attribute to the heartbeat trigger.
- Add Device Tree support to the leds-netxbig driver and add related DT
nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts files.
Remove static LED setup from the related board files.
- Remove redundant brightness conversion operation from leds-netxbig.
- Improve leds-bcm6328 driver: improve default-state handling, add more
init configuration options, print invalid LED instead of warning only
about maximum LED value.
- Add a shutdown function for setting gpio-leds into off state when
shutting down.
- Fix DT flash timeout property naming in leds-aat1290.txt.
- Switch to using devm prefixed version of led_classdev_register()
(leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro,
leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx, leds-wrap).
- Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328,
leds-88pm860x).
- Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro.
* tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (27 commits)
leds: 88pm860x: add missing of_node_put
leds: bcm6328: add missing of_node_put
leds: bcm6358: add missing of_node_put
powerpc/powernv: add missing of_node_put
leds: leds-wrap.c: Use devm_led_classdev_register
leds: aat1290: Fix property naming of flash-timeout-us
leds: leds-net48xx: Use devm_led_classdev_register
leds: leds-menf21bmc.c: Use devm_led_class_register
leds: leds-locomo.c: Use devm_led_classdev_register
leds: leds-gpio: add shutdown function
Documentation: leds: update DT bindings for leds-bcm6328
leds-bcm6328: add more init configuration options
leds-bcm6328: simplify and improve default-state handling
leds-bcm6328: print invalid LED
leds: netxbig: set led_classdev max_brightness
leds: netxbig: convert to use the devm_ functions
ARM: mvebu: remove static LED setup for netxbig boards
ARM: Kirkwood: add LED DT entries for netxbig boards
leds: netxbig: add device tree binding
leds: triggers: add invert to heartbeat
...
TP_ARGS is not used anywhere in trace.h nor trace_entries.h
Firstly, I left just #undef TP_ARGS and had no errors - remove it.
Link: http://lkml.kernel.org/r/1446576560-14085-1-git-send-email-0x7f454c46@gmail.com
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 7d7355f58b ("sh_eth: Ensure proper ordering of descriptor active
bit write/read") did the right thing but used too "heavy" barriers while
there were already "lighter" DMA barriers exactly for this case...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that max_stack_lock is a global variable, it requires a naming
convention that is unlikely to collide. Rename it to the same naming
convention that the other stack_trace variables have.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A stack frame may be used in a different way depending on cpu architecture.
Thus it is not always appropriate to slurp the stack contents, as current
check_stack() does, in order to calcurate a stack index (height) at a given
function call. At least not on arm64.
In addition, there is a possibility that we will mistakenly detect a stale
stack frame which has not been overwritten.
This patch makes check_stack() a weak function so as to later implement
arch-specific version.
Link: http://lkml.kernel.org/r/1446182741-31019-5-git-send-email-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were
fixing the "BH-ness" of the counter bumps whilst in 'net-next'
the functions were modified to take an explicit 'net' parameter.
Signed-off-by: David S. Miller <davem@davemloft.net>
Caller passing down the SKIP_EOPNOTSUPP switchdev flag expects that
-EOPNOTSUPP cannot be returned. But in case of direct op call without
recurtion, this may happen. So fix this by checking it always on the
end of __switchdev_port_attr_set function.
Fixes: 464314ea6c ("switchdev: skip over ports returning -EOPNOTSUPP when recursing ports")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The irlmp_unregister_service() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For cases where CONFIG_LBDAF is not set. The struct ppa_addr exceeds its
type on 32 bit architectures. ppa_addr requires a 64bit integer to hold
the generic ppa format. We therefore refactor it to u64 and
replaces the sector_t usages with u64 for physical addresses.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This driver uses 'struct timeval' which we are trying to remove since
32 bit time types will break in the year 2038 by replacing it with
ktime_t.
This patch changes do_gettimeofday() to ktime_get() because
ktime_get() returns a ktime_t while do_gettimeofday() returns struct
timeval.
This patch also uses ktime_us_delta() to get the elapsed time.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace wait_event_killable with wait_event_interruptible
so that a program waiting for a posix lock can be
interrupted by a signal. With the killable version,
a program was not interruptible by a signal if it
had a signal handler set for it, overriding the default
action of terminating the process.
Signed-off-by: Eric Ren <zren@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
* remove a warning on a check that can trigger without any
errors having happened (Andrei)
* correctly handle deauth request while in the process of
associating (Andrei)
* fix TDLS HT operation (Arik)
* allow changing AID/listen interval during client setup (Ayala)
* be more forgiving with WMM parameters to get HT/VHT in case of
broken APs with bad WMM settings (Emmanuel, myself)
* a number of other fixes (some in documentation)
-----BEGIN PGP SIGNATURE-----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=/d5+
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2015-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Another set of fixes:
* remove a warning on a check that can trigger without any
errors having happened (Andrei)
* correctly handle deauth request while in the process of
associating (Andrei)
* fix TDLS HT operation (Arik)
* allow changing AID/listen interval during client setup (Ayala)
* be more forgiving with WMM parameters to get HT/VHT in case of
broken APs with bad WMM settings (Emmanuel, myself)
* a number of other fixes (some in documentation)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA ports must be members of a VLAN in order to ensure frame bridging
between chained switch chips.
Thus tag them in addition to the CPU port when adding a VLAN, and skip
them when deleting a VLAN and reporting VLAN members.
Also use the UNMODIFIED egress policy, so that frames egress on these
ports as they ingress, tagged or untagged.
Fixes: 0d3b33e602 ("net: dsa: mv88e6xxx: add VLAN Load support")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>