When eager FPU is disabled, KVM will still see the MPX bit in CPUID and
presumably the MPX vmentry and vmexit controls. However, it will not
be able to expose the MPX XSAVE features to the guest, because the guest's
accessible XSAVE features are always a subset of host_xcr0.
In this case, we should disable the MPX CPUID bit, the BNDCFGS MSR,
and the MPX vmentry and vmexit controls for nested virtualization.
It is then unnecessary to enable guest eager FPU if the guest has the
MPX CPUID bit set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
- PMU support for guests
- 32bit world switch rewritten in C
- Various optimizations to the vgic save/restore code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rpvb
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM updates for 4.6
- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
- PMU support for guests
- 32bit world switch rewritten in C
- Various optimizations to the vgic save/restore code
Conflicts:
include/uapi/linux/kvm.h
Branch-free code is fun and everybody knows how much Avi loves it,
but last_pte_bitmap takes it a bit to the extreme. Since the code
is simply doing a range check, like
(level == 1 ||
((gpte & PT_PAGE_SIZE_MASK) && level < N)
we can make it branch-free without storing the entire truth table;
it is enough to cache N.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_sync_children can only process up to 16 pages at a time. Check
if we need to reschedule, and do not bother zapping the pages until
that happens.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_mmu_get_page is the only caller of kvm_sync_page_transient
and kvm_sync_pages. Moving the handling of the invalid_list there
removes the need for the underdocumented kvm_sync_page_transient
function.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return true if the page was synced (and the TLB must be flushed)
and false if the page was zapped.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calling kvm_unlink_unsync_page in the middle of __kvm_sync_page makes
things unnecessarily tricky. If kvm_mmu_prepare_zap_page is called,
it will call kvm_unlink_unsync_page too. So kvm_unlink_unsync_page can
be called just as well at the beginning or the end of __kvm_sync_page...
which means that we might do it in kvm_sync_page too and remove the
parameter.
kvm_sync_page ends up being the same code that kvm_sync_pages used
to have before the previous patch.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the last argument is true, kvm_unlink_unsync_page is called anyway in
__kvm_sync_page (either by kvm_mmu_prepare_zap_page or by __kvm_sync_page
itself). Therefore, kvm_sync_pages can just call kvm_sync_page, instead
of going through kvm_unlink_unsync_page+__kvm_sync_page.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By doing this, kvm_sync_pages can use __kvm_sync_page instead of
reinventing it. Because of kvm_mmu_flush_or_zap, the code does not
end up being more complex than before, and more cleanups to kvm_sync_pages
will come in the next patches.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a generalization of mmu_pte_write_flush_tlb, that also
takes care of calling kvm_mmu_commit_zap_page. The next
patches will introduce more uses.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A function that does the same as i8254.c's muldiv64 has been added
(for KVM's own use, in fact!) in include/linux/math64.h. Use it
instead of muldiv64.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Give a special invalid index to the root of the walk, so that we
can check the consistency of kvm_mmu_pages and mmu_page_path.
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
[Extracted from a bigger patch proposed by Guangrong. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_mmu_pages_init is doing some really yucky stuff. It is setting
up a sentinel for mmu_page_clear_parents; however, because of a) the
way levels are numbered starting from 1 and b) the way mmu_page_path
sizes its arrays with PT64_ROOT_LEVEL-1 elements, the access can be
out of bounds. This is harmless because the code overwrites up to the
first two elements of parents->idx and these are initialized, and
because the sentinel is not needed in this case---mmu_page_clear_parents
exits anyway when it gets to the end of the array. However ubsan
complains, and everyone else should too.
This fix does three things. First it makes the mmu_page_path arrays
PT64_ROOT_LEVEL elements in size, so that we can write to them without
checking the level in advance. Second it disintegrates kvm_mmu_pages_init
between mmu_unsync_walk (to reset the struct kvm_mmu_pages) and
for_each_sp (to place the NULL sentinel at the end of the current path).
This is okay because the mmu_page_path is only used in
mmu_pages_clear_parents; mmu_pages_clear_parents itself is called within
a for_each_sp iterator, and hence always after a call to mmu_pages_next.
Third it changes mmu_pages_clear_parents to just use the sentinel to
stop iteration, without checking the bounds on level.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document possible races between readers and concurrent update to the
ioctl.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can do it just once.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
channels has offset 0 and correct size now, but that can change.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PIT is known at that point.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm isn't ever used and pit can be accessed with container_of.
If you *really* need kvm, pit_state_to_pit(ps)->kvm.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Could be easier to read, but git history will become deeper.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Locks are gone, so we don't need to duplicate error paths.
Use goto everywhere.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Discard policy doesn't rely on information from notifiers, so we don't
need to register notifiers unconditionally. We kept correct counts in
case userspace switched between policies during runtime, but that can be
avoided by reseting the state.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- kvm_create_pit had to lock only because it exposed kvm->arch.vpit very
early, but initialization doesn't use kvm->arch.vpit since the last
patch, so we can drop locking.
- kvm_free_pit is only run after there are no users of KVM and therefore
is the sole actor.
- Locking in kvm_vm_ioctl_reinject doesn't do anything, because reinject
is only protected at that place.
- kvm_pit_reset isn't used anywhere and its locking can be dropped if we
hide it.
Removing useless locking allows to see what actually is being protected
by PIT state lock (values accessible from the guest).
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch passes struct kvm_pit into internal PIT functions.
Those functions used to get PIT through kvm->arch.vpit, even though most
of them never used *kvm for other purposes. Another benefit is that we
don't need to set kvm->arch.vpit during initialization.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest could hit this, it would hang the host kernel, bacause of
sheer number of those reports. Internal callers have to be sensible
anyway, so we now only check for it in an API function.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The lock was an overkill, the same can be done with atomics.
A mb() was added in kvm_pit_ack_irq, to pair with implicit barrier
between pit_timer_fn and pit_do_work. The mb() prevents a race that
could happen if pending == 0 and irq_ack == 0:
kvm_pit_ack_irq: | pit_timer_fn:
p = atomic_read(&ps->pending); |
| atomic_inc(&ps->pending);
| queue_work(pit_do_work);
| pit_do_work:
| atomic_xchg(&ps->irq_ack, 0);
| return;
atomic_set(&ps->irq_ack, 1); |
if (p == 0) return; |
where the interrupt would not be delivered in this tick of pit_timer_fn.
PIT would have eventually delivered the interrupt, but we sacrifice
perofmance to make sure that interrupts are not needlessly delayed.
sfence isn't enough: atomic_dec_if_positive does atomic_read first and
x86 can reorder loads before stores. lfence isn't enough: store can
pass lfence, turning it into a nop. A compiler barrier would be more
than enough as CPU needs to stall for unbelievably long to use fences.
This patch doesn't do anything in kvm_pit_reset_reinject, because any
order of resets can race, but the result differs by at most one
interrupt, which is ok, because it's the same result as if the reset
happened at a slightly different time. (Original code didn't protect
the reset path with a proper lock, so users have to be robust.)
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pit_state.pending and pit_state.irq_ack are always reset at the same
time. Create a function for them.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Discard policy uses ack_notifiers to prevent injection of PIT interrupts
before EOI from the last one.
This patch changes the policy to always try to deliver the interrupt,
which makes a difference when its vector is in ISR.
Old implementation would drop the interrupt, but proposed one injects to
IRR, like real hardware would.
The old policy breaks legacy NMI watchdogs, where PIT is used through
virtual wire (LVT0): PIT never sends an interrupt before receiving EOI,
thus a guest deadlock with disabled interrupts will stop NMIs.
Note that NMI doesn't do EOI, so PIT also had to send a normal interrupt
through IOAPIC. (KVM's PIT is deeply rotten and luckily not used much
in modern systems.)
Even though there is a chance of regressions, I think we can fix the
LVT0 NMI bug without introducing a new tick policy.
Cc: <stable@vger.kernel.org>
Reported-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register the notifier to receive write track event so that we can update
our shadow page table
It makes kvm_mmu_pte_write() be the callback of the notifier, no function
is changed
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now, all non-leaf shadow page are page tracked, if gfn is not tracked
there is no non-leaf shadow page of gfn is existed, we can directly
make the shadow page of gfn to unsync
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
non-leaf shadow pages are always write protected, it can be the user
of page track
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Notifier list is introduced so that any node wants to receive the track
event can register to the list
Two APIs are introduced here:
- kvm_page_track_register_notifier(): register the notifier to receive
track event
- kvm_page_track_unregister_notifier(): stop receiving track event by
unregister the notifier
The callback, node->track_write() is called when a write access on the
write tracked page happens
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the page fault is caused by write access on write tracked page, the
real shadow page walking is skipped, we lost the chance to clear write
flooding for the page structure current vcpu is using
Fix it by locklessly waking shadow page table to clear write flooding
on the shadow page structure out of mmu-lock. So that we change the
count to atomic_t
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The page fault caused by write access on the write tracked page can not
be fixed, it always need to be emulated. page_fault_handle_page_track()
is the fast path we introduce here to skip holding mmu-lock and shadow
page table walking
However, if the page table is not present, it is worth making the page
table entry present and readonly to make the read access happy
mmu_need_write_protect() need to be cooked to avoid page becoming writable
when making page table present or sync/prefetch shadow page table entries
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These two functions are the user APIs:
- kvm_slot_page_track_add_page(): add the page to the tracking pool
after that later specified access on that page will be tracked
- kvm_slot_page_track_remove_page(): remove the page from the tracking
pool, the specified access on the page is not tracked after the last
user is gone
Both of these are called under the protection both of mmu-lock and
kvm->srcu or kvm->slots_lock
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The array, gfn_track[mode][gfn], is introduced in memory slot for every
guest page, this is the tracking count for the gust page on different
modes. If the page is tracked then the count is increased, the page is
not tracked after the count reaches zero
We use 'unsigned short' as the tracking count which should be enough as
shadow page table only can use 2^14 (2^3 for level, 2^1 for cr4_pae, 2^2
for quadrant, 2^3 for access, 2^1 for nxe, 2^1 for cr0_wp, 2^1 for
smep_andnot_wp, 2^1 for smap_andnot_wp, and 2^1 for smm) at most, there
is enough room for other trackers
Two callbacks, kvm_page_track_create_memslot() and
kvm_page_track_free_memslot() are implemented in this patch, they are
internally used to initialize and reclaim the memory of the array
Currently, only write track mode is supported
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split rmap_write_protect() and introduce the function to abstract the write
protection based on the slot
This function will be used in the later patch
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Abstract the common operations from account_shadowed() and
unaccount_shadowed(), then introduce kvm_mmu_gfn_disallow_lpage()
and kvm_mmu_gfn_allow_lpage()
These two functions will be used by page tracking in the later patch
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_lpage_info->write_count is used to detect if the large page mapping
for the gfn on the specified level is allowed, rename it to disallow_lpage
to reflect its purpose, also we rename has_wrprotected_page() to
mmu_gfn_lpage_is_disallowed() to make the code more clearer
Later we will extend this mechanism for page tracking: if the gfn is
tracked then large mapping for that gfn on any level is not allowed.
The new name is more straightforward
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the vector stored at interrupt delivery makes the eoi
matching safe agains irq migration in the ioapic.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows backtracking later in case the rtc irq has been
moved to another vcpu/vector.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently this is a bitmap which tracks which CPUs we expect
an EOI from. Move this bitmap to a struct so that we can
track additional information there.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e8dd2d2d64 ("Silence compiler warning in arch/x86/kvm/emulate.c",
2015-09-06) broke boot of the Hurd. The bug is that the "default:"
case actually could modify "la", but after the patch this change is
not reflected in *linear.
The bug is visible whenever a non-zero segment base causes the linear
address to wrap around the 4GB mark.
Fixes: e8dd2d2d64
Cc: stable@vger.kernel.org
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To make the intention clearer, use list_last_entry instead of
list_entry.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use list_for_each_entry*() instead of list_for_each*() to simplify
the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
