We were storing viewport relative coordinates for AVIVO/DCE display
engines. However, radeon_crtc_cursor_set2 and radeon_cursor_reset pass
radeon_crtc->cursor_x/y as the x/y parameters of
radeon_cursor_move_locked, which would break if the CRTC isn't located
at (0, 0).
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The cursor size also affects the register programming.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Normally only necessary when the cursor size changes.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The cursor size also affects the register programming.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were storing viewport relative coordinates. However, crtc_cursor_set2
and cursor_reset pass amdgpu_crtc->cursor_x/y as the x/y parameters of
cursor_move_locked, which would break if the CRTC isn't located at
(0, 0).
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GUI idle interrupts should be enabled only after we
have enabled coarse grain clock gating (CGCG). This
prevents GFX engine generating idle interrupt even
though CGCG is not completely enabled.
Most of the time this goes un-noticed, but on some
Stoney ASICs this results in GFX engine hang after
system resumes from suspend. The issue is not
particular to Stoney though and could have occured
on any ASIC. The patch fixes this issue.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Sunil Uttarwar <Sunil.Uttarwar1@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
VCE clocks are set to be disabled, when not in use.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
can't get uvd's state by uvd_enabled. uvd_enabled
is used for request higher mclk.
in multi-display case, mclk has been in highest clock,
no matter uvd's state changed, uvd_enabled will not
be changed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forget to check UCODE_ID_STORAGE case and will cause to print error
message when loading driver, correct it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtualization, firmware loading need the firmware version info,
and will load the right firmware. So, transfer fw_version to toc.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the root cause is we gate the clock to uvd vcpu.
mclk's change should need the response from uvd if
it is power on.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit a693e050ed.
This breaks on systems with huge amounts of system memory as we do not have
enough vram to store the page tables. Additionally, this is less of an issue
with the recent gtt manager changes.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds support for the AU Optronics G185HAN01 18.5" LVDS FullHD TFT
LCD panel, which can be supported by the simple panel driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds support for the AU Optronics G133HAN01 13.3" LVDS FullHD TFT
LCD panel, which can be supported by the simple panel driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert from a single mode to display timings, which allow to describe
the minimum/maximium blanking and clock rates, add enable/disable delays
and provide the bus format.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Sharp LQ123P1JX31 panel support 8 bits per component.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In the loop on .timings, we should check .num_timings to see if it's the
only mode specified, not .num_modes, which should be used with .modes.
Fixes: cda553725c ("drm/panel: simple: Set appropriate mode type")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
supported by the simple panel driver.
Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If we cannot acquire the mode_config.mutex immediately, just back off and
queue a new attempt after the poll interval. This is mostly to stop the
hung task spam when the system is deadlocked, but it will also lessen
the load (in such extreme cases).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
[danvet:s/lock/mutex/ per Eric's comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161206113715.30382-1-chris@chris-wilson.co.uk
This is an attempt to make the previous fix a bit more robust going
forward.
v2:
* Only allow DRM_CAP_TIMESTAMP_MONOTONIC with UMS drivers (Daniel
Vetter, Alex Deucher)
* Different logic to keep DRM_CAP_TIMESTAMP_MONOTONIC separate from
the other caps (Daniel Vetter)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201073731.5716-1-michel@daenzer.net
Backmerge v4.9-rc8 to get at
commit e94bd1736f
Author: Michel Dänzer <michel.daenzer@amd.com>
Date: Wed Nov 30 17:30:01 2016 +0900
drm: Don't call drm_for_each_crtc with a non-KMS driver
so I can apply Michel's follow-up patch.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Since commit 8a357d1004 ("drm: Nerf DRM_CONTROL nodes"), a
struct drm_device's ->control member is always NULL.
In the case of CONFIG_DEBUG_FS=y, amdgpu_debugfs_add_files() accesses
->control->debugfs_root though. This results in a NULL pointer
dereference.
Fix this by omitting the drm_debugfs_create_files() call for the
control minor debugfs directory which is now non-existent anyway.
Fixes: 8a357d1004 ("drm: Nerf DRM_CONTROL nodes")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98915
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205203022.11671-1-nicstange@gmail.com
The drm_atomic_helper_connector_dpms
will set the connector back the old DPMS state
before returning. This makes it impossible to change
DPMS state of the connector.
Fixes: 0853695c3b
v2: edit of commit message
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205120408.13056-1-marta.lofstedt@intel.com
Add myself as maintainer for Amlogic DRM drivers.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add new driver for MXSFB.
* 'drm-next/mxsfb' of git://git.kernel.org/pub/scm/linux/kernel/git/marex/linux-2.6:
drm: Add new driver for MXSFB controller
dt-bindings: mxsfb: Add new bindings for the MXSFB driver
dt-bindings: mxsfb: Indentation cleanup
Add new driver for the MXSFB controller found in i.MX23/28/6SX .
The MXSFB controller is a simple framebuffer controller with one
parallel LCD output. Unlike the MXSFB fbdev driver that is used
on these systems now, this driver uses the DRM/KMS framework.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Add new DT bindings for new MXSFB driver that is using the
OF graph to parse the video output structure instead of
hard-coding the display properties into the MXSFB node.
The old MXSFB fbdev driver bindings are preserved in the
same file in the "Old bindings" section.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Clean up the ad-hoc indentation in the documentation, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Just refactoring HDMI driver by using infoframe helper
function, fixing GSC Kconfig dependency issue and including trivial
cleanups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: Use VIDEO_SAMSUNG_EXYNOS_GSC=n as GSC Kconfig dependency
drm/exynos: gsc: fix spelling mistakes
exynos-drm: Fix error messages to print flags and size
drm/exynos/hdmi: refactor infoframe code
- lots of code cleanup
- lots of bug fixes
- expose rpm based fan info via hwmon
- lots of clock and powergating fixes
- SI register header cleanup and conversion to common format used by newer asics
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (54 commits)
drm/amdgpu: drop is_display_hung from display funcs
drm/amdgpu/uvd: reduce IB parsing overhead on UVD5+ (v2)
drm/amdgpu/uvd: consolidate code for fetching addr from ctx
drm/amdgpu: Disable DPM in virtualization
drm/amdgpu: use AMDGPU_GEM_CREATE_VRAM_CLEARED for VM PD/PTs (v2)
drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)
drm/amdgpu: fix error handling in amdgpu_bo_create_restricted
drm/amdgpu: fix amdgpu_fill_buffer (v2)
drm/amdgpu: remove amdgpu_irq_get_delayed
amdgpu: Wrap dev_err() calls on vm faults with printk_ratelimit()
amdgpu: Use dev_err() over vanilla printk() in vm_decode_fault()
drm/amd/amdgpu: port of DCE v6 to new headers (v3)
drm/amdgpu: cleanup unused iterator members for sdma v2.4
drm/amdgpu: cleanup unused iterator members for sdma v3
drm/amdgpu:impl vgt_flush for VI(V5)
drm/amdgpu: enable uvd mgcg for Fiji.
drm/amdgpu: refine cz uvd clock gate logic.
drm/amdgpu: change log level to KERN_INFO in ci_dpm.c
drm/amdgpu: always un-gate UVD REGS path.
drm/amdgpu/sdma: fix typo in packet setup
...
- fix dma-buf export path to return correct SG table
- trivially implement direct dma-buf mapping
- allow DRAW_INSTANCED commands in validator
- make the driver work on i.MX6SX, yielding a working 2D/3D stack
together with Mareks MXS DRM driver
* 'drm-etnaviv-next' of git://git.pengutronix.de/lst/linux:
MAINTAINERS: add etnaviv mailinglist
drm/etnaviv: move linear window on MC1.0 parts if necessary
drm/etnaviv: don't invoke OOM killer from dump code
drm/etnaviv: fix gem_prime_get_sg_table to return new SG table
drm/etnaviv: Allow DRAW_INSTANCED commands
drm/etnaviv: implement dma-buf mmap
- BIT_PERF_PTRS uses 32-bit pointers to its subtables, we were parsing
them as 16-bit, causing various issues on newer boards.
- Support for MXM on GM20x and up.
- More display-related fixes.
* 'linux-4.10' of git://github.com/skeggsb/linux:
drm/nouveau/mxm: warn more loudly on unsupported DCB version
drm/nouveau/mxm: handle DCB 4.1 modification
drm/nouveau/bios/mxm: handle digital connector table 1.1
drm/nouveau: Queue hpd_work on (runtime) resume
drm/nouveau: Rename acpi_work to hpd_work
drm/nouveau/kms/nv50: Fix atomic pageflip events.
drm/nouveau/fb/ram/gp100-: fix memory detection where FBP_NUM != FBPA_NUM
drm/nouveau/bios/volt: pointers are 32-bit
drm/nouveau/bios/vmap: pointers are 32-bit
drm/nouveau/bios/timing: pointers are 32-bit
drm/nouveau/bios/therm: pointers are 32-bit
drm/nouveau/bios/perf: pointers are 32-bit
drm/nouveau/bios/iccsense: pointers are 32-bit
drm/nouveau/bios/fan: pointers are 32-bit
drm/nouveau/bios/cstep: pointers are 32-bit
drm/nouveau/bios/boost: pointers are 32-bit
I suspect the version bump is just to signify that the table now specifies
pad macro/links instead of SOR/sublinks.
For our usage of the table, just recognising the new version is enough.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In function qxl_release_alloc(), when kmalloc() returns a NULL pointer,
it returns value 0 and parameter *ret is uninitialized. 0 means no error
to the callers of qxl_release_alloc(). The callers keep going and will
try to reference the uninitialized variable. This patch fixes the bug,
returning "-ENOMEM" when kmalloc() fails.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188911
Signed-off-by: Pan Bian <bianpan2016@163.com>
[seanpaul fixed up subject prefix]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1480777902-7648-1-git-send-email-bianpan2016@163.com
Commit aeefb36832 ("drm/exynos: gsc: add device tree support and remove
usage of static mappings") made the DRM_EXYNOS_GSC Kconfig symbol to only
be selectable if the exynos-gsc V4L2 driver isn't enabled, since both use
the same HW IP block.
But added the dependency as depends on !VIDEO_SAMSUNG_EXYNOS_GSC which is
not correct since Kconfig expressions are not boolean but tristate. So it
will only evaluate to 'n' if VIDEO_SAMSUNG_EXYNOS_GSC=y but will evaluate
to 'm' if VIDEO_SAMSUNG_EXYNOS_GSC=m.
This means that both the V4L2 and DRM drivers can be enabled if the former
is enabled as a module, which isn't what we want since otherwise 2 drivers
could attempt to use the hardware at the same time.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Trivial fixes to spelling mistakes "precalser" to "prescaler"
in dev_err messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix exynos_drm_gem_create() error messages to include flags and size when
flags and size are invalid.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use core helpers to generate infoframes and generate vendor frame if necessary.
Changelog:
- changed 'ret >= 0' checks to '!ret'
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, we have an active reference for the request until it is
retired. Though it cannot be retired before it has been executed by
hardware, the request may be completed before we have finished
processing the execute fence, i.e. we may continue to process that fence
as we free the request.
Fixes: 5590af3e11 ("drm/i915: Drive request submission through fence callbacks")
Fixes: 23902e49c9 ("drm/i915: Split request submit/execute phase into two")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-3-chris@chris-wilson.co.uk
(cherry picked from commit 48bc2a4a42)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Some monitors will have noise or even no sound after
applying the patch 6014ac12.
In patch 6014ac12, it will reset the cts value to 0 for HDMI.
However, we need to disable Enable CTS or M Prog bit. This is
the initial setting after HW reset.
Fixes: 6014ac122e ("drm/i915/audio: set proper N/M in modeset")
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478853988-139842-1-git-send-email-libin.yang@intel.com
(cherry picked from commit 60abfbb86a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The i915_next_seqno read value is to be the next seqno used by the
kernel. However, in the conversion to atomics ops for gt.next_seqno, in
commit 28176ef4cf ("drm/i915: Reserve space in the global seqno during
request allocation"), this was changed from a post-increment to a
pre-increment. This increment was missed from the value reported by
debugfs, so in effect it was reporting the current seqno (last
assigned), not the next seqno.
Fixes: 28176ef4cf ("drm/i915: Reserve space in the global seqno during request allocation")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81209
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124094752.19129-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 9607ae7971)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
i915_hws_info() has not been kept upto date (missing new engines) and so
I consider it to be unused. HWS is included in the error state, which
would be an avenue to retrieving it if required in future (possibly via
i915_engine_info). As it is currently oopsing with an rpm testcase, just
remove it.
Fixes: 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98838
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124093401.18852-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 30576a2c46)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Looks like we're only initializing dev_priv->atomic_cdclk_freq
at resume and commit times, not at init time. Let's do that as
well.
We're now hitting the 'WARN_ON(intel_state->cdclk == 0)' in
hsw_compute_linetime_wm() on account of populating
intel_state->cdclk from dev_priv->atomic_cdclk_freq.
Previously we were mispopulating intel_state->cdclk with
dev_priv->cdclk_freq which always had a proper value at init
time and hence the WARN_ON() didn't trigger.
Cc: <stable@vger.kernel.org> # 4.6+: 14676ec6b1 drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things
Cc: <stable@vger.kernel.org> # 4.6+
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98902
Fixes: 14676ec6b1 ("drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480428837-4207-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit 6a259b1f8a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
