'err_info' does not support dynamic configuration since it is const type.
Therefore, in order to support new error type later, 'err_info' is changed
to dynamic configuration.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'hpre_cfg_by_dsm' has checked and printed error path internally. It is not
necessary to do it here, so remove it.
It should return error immediately when return value of 'hpre_cfg_by_dsm'
is non-zero, and no need to execute the remaining sentences.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the received sqe is abnormal, the error message in the sqe written
back by the hardware is printed to help to analyze the abnormal causes.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The return value of 'le32_to_cpu' is unsigned, so change the
variable type from 'int' to 'unsigned int'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two spaces after return, just keep one.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do a trivial typo fix.
s/discribed/described
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HPRE can only deal with src_data smaller than 'p' in 'CURVE25519'
algorithm, but 'rfc7748' says:
'Implementations MUST accept non-canonical values and process them as
if they had been reduced modulo the field prime'
So we get its modulus to p, and then deal it with HPRE.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It has newline already by sysfs, so delete redundant '\n'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We must confirm the PASID is disabled before using no-sva mode.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the code related to 'CURRENT_QM' debugfs is exactly same in
sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the configuration of the total number of queues 'ctrl_qp_num'
from sec2/hpre/zip to qm.c. And get the total number of queues
from the hardware register for Kunpeng930.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calling "hpre_ctx_set" fails, stop and put qp,
otherwise will leak qp resource.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
System may be able to get physical address of zero if not reserved by
firmware.
The dma address obtained by 'dma_alloc_coherent' is valid, since already
checking cpu va before, so do not check again.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is redundant code especially when registing new algorithms
in the future.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'CRYPTO_DH' has selected in 'Kconfig', so delete 'CONFIG_CRYPTO_DH'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Algorithm type is brought in to get hardware HPRE queue
to support different algorithms.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A new generation of accelerator Kunpeng930 has appeared, and the
corresponding driver needs to be updated to support some new
algorithms of Kunpeng930. To be compatible with Kunpeng920, we
add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to
identify the chip's version.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to reset hardware when Corrected Error(CE) happens.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add waiting logic for resetting as removing driver,
otherwise call trace will occur due to releasing resource.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable PASID by setting 'sqc' and 'cqc' pasid bits
per queue in Kunpeng 930.
For Kunpeng 920, PASID is effective for all queues once set
in SVA scenarios.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update since some special settings only for Kunpeng920.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HPRE of Kunpeng 930 is updated on cluster numbers,
so we try to update this driver to make it running
okay on Kunpeng920/Kunpeng930 chips.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Uacce SysFS support more algorithms inqury such as
'ecdh/ecdsa/sm2/x25519/x448'
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.One CE error is detecting timeout of generating a random number.
2.Another is detecting timeout of SVA prefetching address.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Delete 'HPRE_RAS_ECC1BIT_TH' register setting of hpre,
since register 'QM_RAS_CE_THRESHOLD' of qm has done this work.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register HPRE device to uacce framework for user space.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since 'qm_create_debugfs_file' always returns 0, change it as 'void'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The parameter type of 'pci_set_drvdata' is 'struct hisi_qm',
so here the return type of 'pci_get_drvdata' should be 'struct hisi_qm'
too.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust some coding style to make code aligned.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to pass kernel CRYPTO test, HPRE module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the devices are removed or not existing, the corresponding algorithms
which are registered by 'hisi-zip' driver can't be used.
Move 'hisi_zip_register_to_crypto' from 'hisi_zip_init' to
'hisi_zip_probe'. The algorithms will be registered to crypto only when
there is device bind on the driver. And when the devices are removed,
the algorithms will be unregistered.
In the previous process, the function 'xxx_register_to_crypto' need a lock
and a static variable to judge if the registration is the first time.
Move this action into the function 'hisi_qm_alg_register'. Each device
will call 'hisi_qm_alg_register' to add itself to qm list in probe process
and registering algs when the qm list is empty.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call trace will appear in the Hisilicon crypto driver unbinding or
disabling SRIOV during task running with TFMs on the corresponding
function.
The log looks like this:
[ 293.908078] Call trace:
[ 293.908080] __queue_work+0x494/0x548
[ 293.908081] queue_work_on+0x84/0xd8
[ 293.908092] qm_irq+0x4c/0xd0 [hisi_qm]
[ 293.908096] __handle_irq_event_percpu+0x74/0x2a0
[ 293.908098] handle_irq_event_percpu+0x40/0x98
[ 293.908099] handle_irq_event+0x4c/0x80
[ 293.908101] handle_fasteoi_irq+0xb0/0x170
[ 293.908102] generic_handle_irq+0x3c/0x58
[ 293.908103] __handle_domain_irq+0x68/0xc0
[ 293.908104] gic_handle_irq+0xb4/0x298
[ 293.908105] el1_irq+0xcc/0x180
[ 293.908107] arch_cpu_idle+0x38/0x228
[ 293.908110] default_idle_call+0x20/0x40
[ 293.908113] do_idle+0x1cc/0x2b8
[ 293.908114] cpu_startup_entry+0x2c/0x30
[ 293.908115] rest_init+0xdc/0xe8
[ 293.908117] arch_call_rest_init+0x14/0x1c
[ 293.908117] start_kernel+0x490/0x4c4
This patch adds a waiting logic as user doing the above two operations
to avoid panic. The two operations will hold on in the driver
remove function until the tasks release all their relative TFMs.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the drivers such as HPRE/SEC/ZIP do not implement
'pci_driver.shutdow', a RAS will be triggered at OS rebooting or shutting
down as the hardware device is processing request.
The log looks like this:
NOTICE: [NimbusSecNodeType1]:[2372L]This is sec, Base = 0x141800000
NOTICE: [NimbusSecHandle]:[2319L] SecIntSt = 0x3
NOTICE: [NimbusSecHandle]:[2320L] SecQmIntStatus = 0x2
NOTICE: [PrintSecurityType]:[344L] SecurityType is RECOVERABLE!
This patch offers a new API in qm to shutdown devices, and add shutdown
callbacks in ACC driver based on this new API.
So the running devices will be stopped when the OS reboot or shutdown.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now, there are three reasons of stopping: 'NORMAL', 'SOFT_RESET' and 'FLR'.
In order to keep this, explicitly pass the stop reason as an input
parameter of 'hisi_qm_stop' function.
Fixes: b67202e8ed30("crypto: hisilicon/qm - add state machine for QM")
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
for Hi1620 hardware, we should disable these hardware flr:
1. BME_FLR - bit 7,
2. PM_FLR - bit 11,
3. SRIOV_FLR - bit 12,
Or HPRE may goto D3 state, when we bind and unbind HPRE quickly,
as it does FLR triggered by BME/PM/SRIOV.
Fixes: c8b4b477079d("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If CONFIG_PCI_IOV is not enabled, we can not use "sriov_configure".
Fixes: 5ec302a364bf("crypto: hisilicon - add SRIOV support for HPRE")
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Bit 1 to bit 5 are NFE, not CE.
2. Macro 'HPRE_VF_NUM' is defined in 'qm.h', so delete it here.
3. Delete multiple blank lines.
4. Adjust format alignment.
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Registers in "hpre_dfx_files" can only be cleaned to zero but
HPRE_OVERTIME_THRHLD, which can be written as any number.
Fixes: 64a6301ebee7("crypto: hisilicon/hpre - add debugfs for ...")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialize current queue number as HPRE_PF_DEF_Q_NUM, or it is zero
and we can't set its value by "current_q_write".
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to be compatible with devices of different versions, V1 in the
accelerator driver is now isolated, and other versions are the previous
V2 processing flow.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add debugfs to provides IO operation debug information
and add BD processing timeout count function
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware device can be configured to report directly through MSI, but
this method will not go through RAS, configure all hardware errors that
should be processed by driver to NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
