Fixed ops were already identical, this adds support for non-fixed ops by
sharing between trion and lucid.
This also changes the names for trion ops to be consistent with the rest.
Note LUCID_PCAL_DONE is renamed to TRION_PCAL_DONE because it is wrong for
lucid, LUCID_PCAL_DONE should be BIT(27). Next patch will address this.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-4-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Reusing the generic struct vc5_hw_data for all blocks is handy. However it
implies we allocate space the div_int and div_frc fields even for the
output drivers where they are unused, and the clk_output_cfg0 and
clk_output_cfg0_mask fields for all components even though they are used
only for the output drivers.
Use a dedicated struct for the output drivers so that each block uses
exactly the fields it needs, not more.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20200723072603.1795-1-luca@lucaceresoli.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When getting the names of the child nodes, kasprintf is used to
allocate memory which is used to create the string for the node
name. Unfortunately, there is no memory check to determine
if this allocation fails, it may cause an error when trying
to get child node name.
This patch will check if the memory allocation fails, and returns
and -ENOMEM error instead of blindly moving on.
Fixes: 260249f929 ("clk: vc5: Enable addition output configurations of the Versaclock")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20200716122620.4538-1-aford173@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are a several places where printing an error message of
init.name occurs after init.name has been kfree'd. Also the failure
message is duplicated each time in the code. Fix this by adding
a registration error failure path for these cases, moving the
duplicated error messages to one common point and kfree'ing init.name
only after it has been used.
Changes also shrink the object code size by 171 bytes (x86-64, gcc 9.3):
Before:
text data bss dec hex filename
21057 3960 64 25081 61f9 drivers/clk/clk-versaclock5.o
After:
text data bss dec hex filename
20886 3960 64 24910 614e drivers/clk/clk-versaclock5.o
Addresses-Coverity: ("Use after free")
Fixes: f491276a51 ("clk: vc5: Allow Versaclock driver to support multiple instances")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200625132736.88832-1-colin.king@canonical.com
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[sboyd@kernel.org: Drop stray newline]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk-qcom:
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
The display gpll0 branch clock inside GCC needs to always be enabled.
Otherwise the AHB clk (disp_cc_mdss_ahb_clk_src) for the display clk
controller (dispcc) will stop clocking while sourcing from gpll0 when
this branch inside GCC is turned off during unused clk disabling. We can
never turn this branch off because the AHB clk for the display subsystem
is needed to read/write any registers inside the display subsystem
including clk related ones. This makes this branch a really easy way to
turn off AHB access to the display subsystem and cause all sorts of
mayhem. Let's just make the clk ops keep the clk enabled forever and
ignore any attempts to disable this clk so that dispcc accesses keep
working.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reported-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/1594796050-14511-1-git-send-email-tdas@codeaurora.org
Fixes: 17269568f7 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Fixes: 06391eddb6 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
[sboyd@kernel.org: Fill out commit text more]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull clk fixes from Stephen Boyd:
"A couple build fixes for issues exposed this merge window and a fix
for the eMMC clk on AST2600 SoCs that fixes the rate that is
calculated by the clk framework"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Specify IOMEM dependency for HSDK pll driver
clk: AST2600: Add mux for EMMC clock
clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
initialization of rate range when clock supports discrete rate.
Fix this by using the first and the last rate in the sorted list of the
discrete clock rates while registering the clock.
Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com
Fixes: 6d6a1d82ea ("clk: add support for clocks provided by SCMI")
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reported-and-tested-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The HSDK pll driver uses the devm_ioremap_resource function, but does
not specify a dependency on IOMEM in Kconfig. This causes a build
failure on architectures without IOMEM, for example, UML (notably with
make allyesconfig).
Fix this by making CONFIG_CLK_HSDK depend on CONFIG_IOMEM.
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20200630043214.1080961-1-davidgow@google.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When building arm32 allmodconfig:
ld.lld: error: undefined symbol: ap_cp_unique_name
>>> referenced by ap-cpu-clk.c
>>> clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a
ap_cp_unique_name is only compiled into the kernel image when
CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable).
However, CONFIG_ARMADA_AP_CPU_CLK does not select it.
This has been a problem since the driver was added to the kernel but it
was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq
driver needs ap cpu clk") so it was never noticed.
Fixes: f756e362d9 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200701201128.2448427-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk-renesas:
clk: renesas: rzg2: Mark RWDT clocks as critical
clk: renesas: rcar-gen3: Mark RWDT clocks as critical
clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot
dt-bindings: clock: renesas: cpg: Convert to json-schema
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200703175114.15027-1-grandmaster@al2klimov.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Enable CPU clks on Qualcomm MSM8996 SoCs
* clk-qcom:
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: qcom: Fix return value check in apss_ipq6018_probe()
Each of the CPU clusters (Power and Perf) on msm8996 are
clocked via 2 PLLs, a primary and alternate. There are also
2 Mux'es, a primary and secondary all connected together
as shown below
+-------+
XO | |
+------------------>0 |
| |
PLL/2 | SMUX +----+
+------->1 | |
| | | |
| +-------+ | +-------+
| +---->0 |
| | |
+---------------+ | +----------->1 | CPU clk
|Primary PLL +----+ PLL_EARLY | | +------>
| +------+-----------+ +------>2 PMUX |
+---------------+ | | | |
| +------+ | +-->3 |
+--^+ ACD +-----+ | +-------+
+---------------+ +------+ |
|Alt PLL | |
| +---------------------------+
+---------------+ PLL_EARLY
The primary PLL is what drives the CPU clk, except for times
when we are reprogramming the PLL itself (for rate changes) when
we temporarily switch to an alternate PLL. A subsequent patch adds
support to switch between primary and alternate PLL during rate
changes.
The primary PLL operates on a single VCO range, between 600MHz
and 3GHz. However the CPUs do support OPPs with frequencies
between 300MHz and 600MHz. In order to support running the CPUs
at those frequencies we end up having to lock the PLL at twice
the rate and drive the CPU clk via the PLL/2 output and SMUX.
So for frequencies above 600MHz we follow the following path
Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk
and for frequencies between 300MHz and 600MHz we follow
Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk
ACD stands for Adaptive Clock Distribution and is used to
detect voltage droops.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Ilia Lin: - reworked clock registering
- Added clock-tree diagram
- non-builtin support
- clock notifier on rate change
- https://lkml.org/lkml/2018/5/24/123
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain: - fixed driver remove / clk deregistering
- Removed useless memory barriers
- devm usage when possible
- Fixed Kconfig depends
Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
HHI_VIID_CLK_CNTL[19] is not part of the public S805 datasheet. However,
the GXBB driver defines this bit as a gate called "vclk2" and in the
3.10 kernel GPL code dump the following line can found:
WRITE_LCD_CBUS_REG_BITS(HHI_VIID_CLK_CNTL, 0, 19, 1); //disable vclk2_en
Add this gate clock to the Meson8/Meson8b/Meson8m2 clock controller to
complete the VCLK2 clock tree.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200629203904.2989007-3-martin.blumenstingl@googlemail.com
This reverts commit 82f4b67f01.
According to a subsequent revert in the vendor kernel, the original
change was based on unclear documentation and was in fact incorrect.
Emprically, my board's HS200 eMMC at 200MHZ apparently gets lucky with a
phase where this had no impact, but limiting max-frequency to 150MHz to
match the nominal capability of the I/O pins made it virtually unusable,
constantly throwing errors and retuning. With this revert, it starts
behaving perfectly at 150MHz too.
Fixes: 82f4b67f01 ("clk: rockchip: fix wrong mmc sample phase shift for rk3328")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/c80eb52e34c03f817586b6b7912fbd4e31be9079.1589475794.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Make defines for bcm63xx-gate clks to use in DT
- Support gate clks on BCM6318 SoCs
- Add HDMI clks for BCM2711 SoCs
- Support BCM2711 SoC firmware clks
* clk-bcm: (42 commits)
clk: bcm: dvp: Add missing module informations
clk: bcm: rpi: Remove the quirks for the CPU clock
clk: bcm2835: Don't cache the PLLB rate
clk: bcm2835: Allow custom CCF flags for the PLLs
Revert "clk: bcm2835: remove pllb"
clk: bcm: rpi: Give firmware clocks a name
clk: bcm: rpi: Discover the firmware clocks
clk: bcm: rpi: Add an enum for the firmware clocks
clk: bcm: rpi: Add DT provider for the clocks
clk: bcm: rpi: Make the PLLB registration function return a clk_hw
clk: bcm: rpi: Split pllb clock hooks
clk: bcm: rpi: Rename is_prepared function
clk: bcm: rpi: Pass the clocks data to the firmware function
clk: bcm: rpi: Add clock id to data
clk: bcm: rpi: Create a data structure for the clocks
clk: bcm: rpi: Use CCF boundaries instead of rolling our own
clk: bcm: rpi: Make sure the clkdev lookup is removed
clk: bcm: rpi: Switch to clk_hw_register_clkdev
clk: bcm: rpi: Remove pllb_arm_lookup global pointer
clk: bcm: rpi: Make sure pllb_arm is removed
...
The (struct __prci_data).hw_clks.hws is an array with dynamic elements.
Using struct_size(pd, hw_clks.hws, ARRAY_SIZE(__prci_init_clocks))
instead of sizeof(*pd) to get the correct memory size of
struct __prci_data for sifive/fu540-prci. After applying this
modifications, the kernel runs smoothly with CONFIG_SLAB_FREELIST_RANDOM
enabled on the HiFive unleashed board.
Fixes: 30b8e27e3b ("clk: sifive: add a driver for the SiFive FU540 PRCI IP block")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Drop CLK_IS_CRITICAL from fclk_div2. This was added because we didn't
know the relation between this clock and RGMII Ethernet. It turns out
that fclk_div2 is used as "timing adjustment clock" to generate the RX
delay on the MAC side - which was enabled by u-boot on Odriod-C1. When
using the RX delay on the PHY side or not using a RX delay at all then
this clock can be disabled.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200620161422.24114-1-martin.blumenstingl@googlemail.com
