The DT binding for system controller is not allowed to contain only the
compatible string "syscon", the Hisilicon peripheral subsystem controller
should add compatible string "hisilicon,peri-subctrl". Otherwise, the
error "compatible: ['syscon'] is too short" will be reported.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Look at the clock-names schema defined in synopsys-dw-mshc.yaml:
clock-names:
items:
- const: biu
- const: ciu
The "biu" needs to be placed before the "ciu".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Make the memory node name match the regex "^memory(@[0-9a-f]+)?$" which
is described in memory.yaml. Otherwise, it will be treated as root node,
and misreported by root-node.yaml.
Errors misreported by root-node.yaml:
/: memory: False schema does not allow {'device_type': ['memory'], 'reg':
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change bus node name from "amba" to "amba-bus" to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^usb(@.*)?'
These errors are detected by generic-ehci.yaml and generic-ohci.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same
clock.
3. Change pinctrl-names to "default", "sleep".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Ux500 DTS updates for the v5.11 kernels:
- Rename the DSI controllers to match the preferred
schema.
- Pull down the SDI2 feedback clock on the Skomer.
- Add proper supplies to the MaxToch touchscreen on
the Golden.
* tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500-golden: Add proper supplies to touchscreen
ARM: dts: ux500: skomer: Pull down SDI2 FBCLK
ARM: dts: ux500: Rename DSI controller nodes
Link: https://lore.kernel.org/r/CACRpkdY_M4xj++QhRPqX6N3x9YmFNJkz70DnvBj7Ai-dOtCJSQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.11
1. Many cleanups of DTS and alignments to dtschema. Most of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two
ports, missing supply to the USB over-current and VBUS control pins
and finally missing pin configuration for these pins.
3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of
using interrupts.
4. Correct the usage of "opp-shared" properties which lead to disabling
the bus frequency and voltage scaling.
5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards.
6. Enable dual-role USB on Odroid U3+ board.
7. Add Ethernet description in multiple Odroid DTS allowing also easy
MAC address filling by bootloader.
8. Add Ethernet to Artik 5 (Exynos3250) board.
9. Add interconnect properties to Exynos4412 to fix old Mixer issues.
* tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: exynos: use hyphens in MFC reserved memory node names
ARM: dts: exynos: use hyphens in Exynos5 node names
ARM: dts: exynos: use generic name for max77693 motor in Midas
ARM: dts: exynos: use hyphens in Exynos4 node names
ARM: dts: exynos: use hyphens in Exynos3250 node names
ARM: dts: exynos: Add interconnects to Exynos4412 mixer
ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
ARM: dts: exynos: Add Ethernet to Artik 5 board
ARM: dts: exynos: Add a placeholder for a MAC address
ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2
ARM: dts: exynos: Add Ethernet interface description for Odroid U3
ARM: dts: exynos: Add Ethernet interface description for Odroid XU
ARM: dts: exynos: Add Ethernet interface description for Odroid XU3 Lite
ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boards
ARM: dts: s5pv210: adjust node names to DT spec
ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards
ARM: dts: exynos: adjust node names to DT spec in Odroid XU
ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards
ARM: dts: exynos: remove redundant status=okay in Exynos4412 boards
ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards
...
Link: https://lore.kernel.org/r/20201113162211.10020-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM DT updates for v5.11
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
* tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404
arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device
arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: r8a77965: Add DRIF support
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node
arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances
arm64: dts: renesas: r8a77961: Add MSIOF nodes
arm64: dts: renesas: Align GPIO hog names with dtschema
ARM: dts: r8a7742-iwg21d-q7: Add LCD support
Link: https://lore.kernel.org/r/20201113150854.3923885-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull EFI fixes from Borislav Petkov:
"Forwarded EFI fixes from Ard Biesheuvel:
- fix memory leak in efivarfs driver
- fix HYP mode issue in 32-bit ARM version of the EFI stub when built
in Thumb2 mode
- avoid leaking EFI pgd pages on allocation failure"
* tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Free efi_pgd with free_pages()
efivarfs: fix memory leak in efivarfs_create()
efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP
The board is using McASP2 for both analog (tlv320aic3106) and
HDMI (SiI9022) audio.
12.288MHz oscillator provides the MCLK for both aic3106 and SiI9022.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
- Maxime introduces a quirk to avoid EMI between WiFi and HDMI@1440p on
RPi4b.
- Pavel fixes dwc2's fifo size to properly support isochronous
transfers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide an empty 'ports' container node with the correct #address-cells
and #size-cells properties. This silences the following warning:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed:
'ports' is a required property
'ethernet-ports' is a required property
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide a valid compatible string for the Ethernet switch node based on
the board including the switch. This allows us to have sane defaults and
silences the following warnings:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@36000: compatible: 'oneOf' conditional failed,
one
must be fixed:
['brcm,bcm5301x-srab'] is too short
'brcm,bcm5325' was expected
'brcm,bcm53115' was expected
'brcm,bcm53125' was expected
'brcm,bcm53128' was expected
'brcm,bcm5365' was expected
'brcm,bcm5395' was expected
'brcm,bcm5389' was expected
'brcm,bcm5397' was expected
'brcm,bcm5398' was expected
'brcm,bcm11360-srab' was expected
'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
'brcm,bcm53019-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The register name should be "sgmii_config", not "sgmii", this is not a
functional change since no code is currently looking for that register
by name (or at all).
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the switch unit name from srab to ethernet-switch, allowing us
to fix warnings such as:
CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
srab@18007000: $nodename:0: 'srab@18007000' does not match
'^(ethernet-)?switch(@.*)?$'
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide an empty 'ports' container node with the correct #address-cells
and #size-cells properties. This silences the following warning:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
'ports' is a required property
'ethernet-ports' is a required property
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide a default compatible string which is based on the 53011 SRAB
compatible by default. The 4709 and 47094 default to the 53012 SRAB
compatible.
This allows us to have sane defaults and silences the following
warnings:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
ethernet-switch@18007000: compatible: 'oneOf' conditional failed, one
must be fixed:
['brcm,bcm5301x-srab'] is too short
'brcm,bcm5325' was expected
'brcm,bcm53115' was expected
'brcm,bcm53125' was expected
'brcm,bcm53128' was expected
'brcm,bcm5365' was expected
'brcm,bcm5395' was expected
'brcm,bcm5389' was expected
'brcm,bcm5397' was expected
'brcm,bcm5398' was expected
'brcm,bcm11360-srab' was expected
'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
'brcm,bcm53019-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the switch unit name from srab to ethernet-switch, allowing us to
fix warnings such as:
CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
srab@18007000: $nodename:0: 'srab@18007000' does not match
'^(ethernet-)?switch(@.*)?$'
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The previous version of the dwc2 overlay set the RX FIFO size to
256 4-byte words. This is not enough for 1024 bytes of the largest
isochronous high speed packet allowed, because it doesn't take into
account extra space needed by dwc2.
RX FIFO's size is calculated based on the following (in 4byte words):
- 13 locations for SETUP packets
5*n + 8 for Slave and Buffer DMA mode where n is number of control
endpoints which is 1 on the bcm283x core
- 1 location for Global OUT NAK
- 2 * 257 locations for status information and the received packet.
Typically two spaces are recommended so that when the previous packet
is being transferred to AHB, the USB can receive the subsequent
packet.
- 10 * 1 location for transfer complete status for last packet of each
endpoint. The bcm283x core has 5 IN and 5 OUT EPs
- 10 * 1 additional location for EPDisable status for each endpoint
- 5 * 2 additional locations are recommended for each OUT endpoint
Total is 558 locations.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/e9e7d070-593c-122f-3a5c-2435bb147ab2@ivitera.com/
Add remaining PRM instances for the omap5 SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver.
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add remaining PRM instances for the dra7 SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add remaining PRM instances for the omap4 SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MAC0 was not functional in the AST2600A0 SoC. This has been resolved
with the A1, so allow use of this port on EVBs with the A1 and
subsequent revisions.
A0 EVBs will still boot with this change, but the first Ethernet device
will not be functional.
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Quanta GSJ BMC uses the Nuvoton NPCM730 SoC.
Included features:
1. Image partitions
2. PWM fan controller
3. USB device
4. Serial port
5. FIU
6. LEDs and GPIOs
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Nuvoton NPCN730 SoC is a part of the Nuvoton NPCM7xx SoCs family.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reserve a 1.5MiB region of memory to record kmsg dumps, console and
userspace message state into 16kiB ring-buffer slots. The sizing allows
for up to 16 dumps to be captured and read out.
Set max-reason to KMSG_DUMP_EMERG to capture bad-path reboots.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201022014731.2035438-7-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
