ETHTOOL_MSG_MODULE_EEPROM_GET is missing from the list of messages.
ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY is sadly a rather long name
so we need to adjust column length.
v2: use spaces (Andrew)
Fixes: c781ff12a2 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device tree bindings for ethernet controller integrated into
IDT 79RC3243x SoCs.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mention the required compatible string and base address for the
Integrated Endpoint Register Block node.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-drivers-next patches for v5.13
Second set of patches for v5.13. A lot of iwlwifi and mt76 patches
this time, and also smaller features and fixes all over.
mt76
* mt7915/mt7615 decapsulation offload support
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support
iwlwifi
* passive scan support for 6GHz
* new hardware support
wilc1000
* CRC support for SPI bus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the ti,secure-proxy to yaml for better checks and documentation.
Differences being mostly in the examples:
- Dropped the example usage of mailbox client, it is better done in
tisci node definition.
- Switched reg usage for address-cells and size-cells 1 - aligned with
schema checks as well.
- included header in example for a buildable example.
While at this, lets make sure to support upto 100 rx threads even though
typically upto 1 threads is practically in use.
NOTE: The following checkpatch warning is generated since we do include the header
in the example, but this is a false positive warning.
WARNING: DT binding docs and includes should be a separate patch. See:
Documentation/devicetree/bindings/submitting-patches.rst
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc8, including fixes from netfilter, and
bpf. BPF verifier changes stand out, otherwise things have slowed
down.
Current release - regressions:
- gro: ensure frag0 meets IP header alignment
- Revert "net: stmmac: re-init rx buffers when mac resume back"
- ethernet: macb: fix the restore of cmp registers
Previous releases - regressions:
- ixgbe: Fix NULL pointer dereference in ethtool loopback test
- ixgbe: fix unbalanced device enable/disable in suspend/resume
- phy: marvell: fix detection of PHY on Topaz switches
- make tcp_allowed_congestion_control readonly in non-init netns
- xen-netback: Check for hotplug-status existence before watching
Previous releases - always broken:
- bpf: mitigate a speculative oob read of up to map value size by
tightening the masking window
- sctp: fix race condition in sctp_destroy_sock
- sit, ip6_tunnel: Unregister catch-all devices
- netfilter: nftables: clone set element expression template
- netfilter: flowtable: fix NAT IPv6 offload mangling
- net: geneve: check skb is large enough for IPv4/IPv6 header
- netlink: don't call ->netlink_bind with table lock held"
* tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
netlink: don't call ->netlink_bind with table lock held
MAINTAINERS: update my email
bpf: Update selftests to reflect new error states
bpf: Tighten speculative pointer arithmetic mask
bpf: Move sanitize_val_alu out of op switch
bpf: Refactor and streamline bounds check into helper
bpf: Improve verifier error messages for users
bpf: Rework ptr_limit into alu_limit and add common error path
bpf: Ensure off_reg has no mixed signed bounds for all types
bpf: Move off_reg into sanitize_ptr_alu
bpf: Use correct permission flag for mixed signed bounds arithmetic
ch_ktls: do not send snd_una update to TCB in middle
ch_ktls: tcb close causes tls connection failure
ch_ktls: fix device connection close
ch_ktls: Fix kernel panic
i40e: fix the panic when running bpf in xdpdrv mode
net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta
net/mlx5e: Fix setting of RS FEC mode
net/mlx5: Fix setting of devlink traps in switchdev mode
Revert "net: stmmac: re-init rx buffers when mac resume back"
...
CONFIG_SCHED_DEBUG is the build-time Kconfig knob, the boot param
sched_debug and the /debug/sched/debug_enabled knobs control the
sched_debug_enabled variable, but what they really do is make
SCHED_DEBUG more verbose, so rename the lot.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
mt76 patches for 5.13
* code cleanup
* mt7915/mt7615 decap offload support
* driver fixes
* mt7613 eeprom support
* MCU code unification
* threaded NAPI support
* new device IDs
* mt7921 device reset support
* rx timestamp support
# gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
Make the lack of expectations for switching NICs explicit,
describe the new stats.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new optional firmware-name property to the IPA DT node. It
is used only if the modem is not doing early initialization (i.e.,
if the modem-init property is not present). Its value is the name
of the firmware file to use; if it's not specified, a default name
("ipa_fws.mdt") is used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add optional brcm,ccode-map property to support translation from ISO3166
country code to brcmfmac firmware country code and revision.
The country revision is needed because the RF parameters that provide
regulatory compliance are tweaked per platform/customer. So depending
on the RF path tight to the chip, certain country revision needs to be
specified. As such they could be seen as device specific calibration
data which is a good fit into device tree.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://lore.kernel.org/r/20210415104728.8471-2-shawn.guo@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Similarly to pause statistics add stats for FEC.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
where block is a block of bits FEC operates on.
Each of these counters is defined per lane (PCS instance).
Multiple vendors provide number of corrected _bits_ rather
than/as well as blocks.
This set adds the 2 standard-based block counters and a extra
one for corrected bits.
Counters are exposed to user space via netlink in new attributes.
Each attribute carries an array of u64s, first element is
the total count, and the following ones are a per-lane break down.
Much like with pause stats the operation will not fail when driver
does not implement the get_fec_stats callback (nor can the driver
fail the operation by returning an error). If stats can't be
reported the relevant attributes will be empty.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel now has a number of testing and debugging tools, and we've
seen a bit of confusion about what the differences between them are.
Add a basic documentation outlining the testing tools, when to use each,
and how they interact.
This is a pretty quick overview rather than the idealised "kernel
testing guide" that'd probably be optimal, but given the number of times
questions like "When do you use KUnit and when do you use Kselftest?"
are being asked, it seemed worth at least having something. Hopefully
this can form the basis for more detailed documentation later.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Link: https://lore.kernel.org/r/20210415054036.581117-1-davidgow@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
MTD core:
* Handle possible -EPROBE_DEFER from parse_mtd_partitions()
NAND core:
* Fix error handling in nand_prog_page_op() (x2)
* Add a helper to retrieve the number of ECC bytes per step
* Add a helper to retrieve the number of ECC steps
* Let ECC engines advertize the exact number of steps
* ECC Hamming:
- Populate the public nsteps field
- Use the public nsteps field
* ECC BCH:
- Populate the public nsteps field
- Use the public nsteps field
Raw NAND core:
* Add support for secure regions in NAND memory
* Try not to use the ECC private structures
* Remove duplicate include in rawnand.h
* BBT:
- Skip bad blocks when searching for the BBT in NAND
Raw NAND controller drivers:
* Qcom:
- Convert bindings to YAML
- Use dma_mapping_error() for error check
- Add missing nand_cleanup() in error path
- Return actual error code instead of -ENODEV
- Update last code word register
- Add helper to configure location register
- Rename parameter name in macro
- Add helper to check last code word
- Convert nandc to chip in Read/Write helper
- Update register macro name for 0x2c offset
* GPMI:
- Fix a double free in gpmi_nand_init
* Rockchip:
- Use flexible-array member instead of zero-length array
* Atmel:
- Update ecc_stats.corrected counter
* MXC:
- Remove unneeded of_match_ptr()
* R852:
- replace spin_lock_irqsave by spin_lock in hard IRQ
* Brcmnand:
- Move to polling in pio mode on oops write
- Read/write oob during EDU transfer
- Fix OOB R/W with Hamming ECC
* FSMC:
- Fix error code in fsmc_nand_probe()
* OMAP:
- Use ECC information from the generic structures
SPI-NAND core:
* Add missing MODULE_DEVICE_TABLE()
SPI-NAND drivers:
* gigadevice: Support GD5F1GQ5UExxG
* for-next/misc:
: Miscellaneous patches
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64/sve: Remove redundant system_supports_sve() tests
arm64: mte: Remove unused mte_assign_mem_tag_range()
arm64: Add __init section marker to some functions
arm64/sve: Rework SVE access trap to convert state in registers
docs: arm64: Fix a grammar error
arm64: smp: Add missing prototype for some smp.c functions
arm64: setup: name `tcr` register
arm64: setup: name `mair` register
arm64: stacktrace: Move start_backtrace() out of the header
arm64: barrier: Remove spec_bar() macro
arm64: entry: remove test_irqs_unmasked macro
ARM64: enable GENERIC_FIND_FIRST_BIT
arm64: defconfig: Use DEBUG_INFO_REDUCED
* for-next/kselftest:
: Various kselftests for arm64
kselftest: arm64: Add BTI tests
kselftest/arm64: mte: Report filename on failing temp file creation
kselftest/arm64: mte: Fix clang warning
kselftest/arm64: mte: Makefile: Fix clang compilation
kselftest/arm64: mte: Output warning about failing compiler
kselftest/arm64: mte: Use cross-compiler if specified
kselftest/arm64: mte: Fix MTE feature detection
kselftest/arm64: mte: common: Fix write() warnings
kselftest/arm64: mte: user_mem: Fix write() warning
kselftest/arm64: mte: ksm_options: Fix fscanf warning
kselftest/arm64: mte: Fix pthread linking
kselftest/arm64: mte: Fix compilation with native compiler
* for-next/xntable:
: Add hierarchical XN permissions for all page tables
arm64: mm: use XN table mapping attributes for user/kernel mappings
arm64: mm: use XN table mapping attributes for the linear region
arm64: mm: add missing P4D definitions and use them consistently
* for-next/vdso:
: Minor improvements to the compat vdso and sigpage
arm64: compat: Poison the compat sigpage
arm64: vdso: Avoid ISB after reading from cntvct_el0
arm64: compat: Allow signal page to be remapped
arm64: vdso: Remove redundant calls to flush_dcache_page()
arm64: vdso: Use GFP_KERNEL for allocating compat vdso and signal pages
* for-next/fiq:
: Support arm64 FIQ controller registration
arm64: irq: allow FIQs to be handled
arm64: Always keep DAIF.[IF] in sync
arm64: entry: factor irq triage logic into macros
arm64: irq: rework root IRQ handler registration
arm64: don't use GENERIC_IRQ_MULTI_HANDLER
genirq: Allow architectures to override set_handle_irq() fallback
* for-next/epan:
: Support for Enhanced PAN (execute-only permissions)
arm64: Support execute-only permissions with Enhanced PAN
* for-next/kasan-vmalloc:
: Support CONFIG_KASAN_VMALLOC on arm64
arm64: Kconfig: select KASAN_VMALLOC if KANSAN_GENERIC is enabled
arm64: kaslr: support randomized module area with KASAN_VMALLOC
arm64: Kconfig: support CONFIG_KASAN_VMALLOC
arm64: kasan: abstract _text and _end to KERNEL_START/END
arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC
* for-next/fgt-boot-init:
: Booting clarifications and fine grained traps setup
arm64: Require that system registers at all visible ELs be initialized
arm64: Disable fine grained traps on boot
arm64: Document requirements for fine grained traps at boot
* for-next/vhe-only:
: Dealing with VHE-only CPUs (a.k.a. M1)
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
arm64: cpufeature: Allow early filtering of feature override
* arm64/for-next/perf:
arm64: perf: Remove redundant initialization in perf_event.c
perf/arm_pmu_platform: Clean up with dev_printk
perf/arm_pmu_platform: Fix error handling
perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors
docs: perf: Address some html build warnings
docs: perf: Add new description on HiSilicon uncore PMU v2
drivers/perf: hisi: Add support for HiSilicon PA PMU driver
drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver
drivers/perf: hisi: Update DDRC PMU for programmable counter
drivers/perf: hisi: Add new functions for HHA PMU
drivers/perf: hisi: Add new functions for L3C PMU
drivers/perf: hisi: Add PMU version for uncore PMU drivers.
drivers/perf: hisi: Refactor code for more uncore PMUs
drivers/perf: hisi: Remove unnecessary check of counter index
drivers/perf: Simplify the SMMUv3 PMU event attributes
drivers/perf: convert sysfs sprintf family to sysfs_emit
drivers/perf: convert sysfs scnprintf family to sysfs_emit_at() and sysfs_emit()
drivers/perf: convert sysfs snprintf family to sysfs_emit
* for-next/neon-softirqs-disabled:
: Run kernel mode SIMD with softirqs disabled
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
Georgi writes:
interconnect changes for 5.13
These are the interconnect changes for the 5.13-rc1 merge window
with the highlights being drivers for two new platforms.
Driver changes:
- New driver for SM8350 platforms.
- New driver for SDM660 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: sm8350: Add missing link between nodes
interconnect: qcom: sm8350: Use the correct ids
interconnect: qcom: sdm660: Fix kerneldoc warning
MAINTAINERS: icc: add interconnect tree
interconnect: qcom: Add SM8350 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings
interconnect: qcom: icc-rpm: record slave RPM id in error log
interconnect: qcom: Add SDM660 interconnect provider driver
dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC
Saeed Mahameed says:
====================
mlx5-updates-2021-04-13
mlx5 core and netdev driver updates
1) E-Switch updates from Parav,
1.1) Devlink parameter to control mlx5 metadata enablement for E-Switch
1.2) Trivial cleanups for E-Switch code
1.3) Dynamically allocate vport steering namespaces only when required
2) From Jianbo, Use variably sized data structures for Software steering
3) Several minor cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's have all seg6 sysctl at the same place.
Fixes: a6dc6670cd ("ipv6: sr: Add documentation for seg_flowlabel sysctl")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently each packet inserted in eswitch is tagged with a internal
metadata to indicate source vport. Metadata tagging is not always
needed. Metadata insertion is needed for multi-port RoCE, failover
between representors and stacked devices. In many other cases,
metadata enablement is not needed.
Metadata insertion slows down the packet processing rate of the E-switch
when it is in switchdev mode.
Below table show performance gain with metadata disabled for VXLAN
offload rules in both SMFS and DMFS steering mode on ConnectX-5 device.
----------------------------------------------
| steering | metadata | pkt size | rx pps |
| mode | | | (million) |
----------------------------------------------
| smfs | disabled | 128Bytes | 42 |
----------------------------------------------
| smfs | enabled | 128Bytes | 36 |
----------------------------------------------
| dmfs | disabled | 128Bytes | 42 |
----------------------------------------------
| dmfs | enabled | 128Bytes | 36 |
----------------------------------------------
Hence, allow user to disable metadata using driver specific devlink
parameter. Metadata setting of the eswitch is applicable only for the
switchdev mode.
Example to show and disable metadata before changing eswitch mode:
$ devlink dev param show pci/0000:06:00.0 name esw_port_metadata
pci/0000:06:00.0:
name esw_port_metadata type driver-specific
values:
cmode runtime value true
$ devlink dev param set pci/0000:06:00.0 \
name esw_port_metadata value false cmode runtime
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
changelog:
v1->v2:
- added performance numbers in commit log
- updated commit log and documentation for switchdev mode
- added explicit note on when user can disable metadata in
documentation
Convert pm8xxx bindings from .txt to .yaml format. Also,
split this binding into two: parent binding(qcom-pm8xxx.yaml)
and child node RTC binding(qcom-pm8xxx-rtc.yaml).
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Convert the RN5T618 binding to DT schema format. Also
clearly state which regulators are available.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window
Immutable branch between MFD and Extcon due for the v5.13 merge window
Immutable branch between MFD and Input due for the v5.13 merge window
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
Immutable branch between MFD and Power due for the v5.13 merge window
Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
