Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Proper support for BCM4330 and BMC4334
- Various improvements for firmware download of Intel controllers
- Update management interface revision to 20
- Support for AOSP HCI vendor commands
- Initial Virtio support
====================
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I removed myself as a maintainer of the yaml file, I missed that
some maintainer is required. Oleksij is already listed in MAINTAINERS
for this file, so add him here as well.
Fixes: 1ae6b37808 ("i2c: imx: drop me as maintainer of binding docs")
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Memory controller drivers for v5.13 - Tegra SoC
1. Few cleanups.
2. Add debug statistics to Tegra20 memory controller.
3. Update bindings and convert to dtschema. This update is not
backwards compatible (ABI break) however the broken part was added
recently (v5.11) and there are no users of it yet.
* tag 'memory-controller-drv-tegra-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: tegra20: mc: Convert to schema
dt-bindings: memory: tegra124: emc: Replace core regulator with power domain
dt-bindings: memory: tegra30: emc: Replace core regulator with power domain
dt-bindings: memory: tegra20: emc: Replace core regulator with power domain
memory: tegra: Print out info-level once per driver probe
memory: tegra20: Protect debug code with a lock
memory: tegra20: Correct comment to MC_STAT registers writes
memory: tegra20: Add debug statistics
memory: tegra: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
Link: https://lore.kernel.org/r/20210407161333.73013-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for 5.13
This introduces SC7280 and SM8350 support in the RPMH power-domain
driver, SC7280 support to the LLCC driver, SC7280 support tot he AOSS
QMP driver, cleanups to the RPMH driver and a few smaller fixes to the
SMEM, QMI and EBI2 drivers.
* tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
bus: qcom: Put child node before return
dt-bindings: firmware: scm: Add sc7280 support
soc: qcom: rpmh-rsc: Fold WARN_ON() into if condition
soc: qcom: rpmh-rsc: Loop over fewer bits in irq handler
soc: qcom: rpmh-rsc: Remove tcs_is_free() API
soc: qcom: smem: Update max processor count
soc: qcom: aoss: Add AOSS QMP support for SC7280
dt-bindings: soc: qcom: aoss: Add SC7280 compatible
soc: qcom: llcc: Add configuration data for SC7280
dt-bindings: arm: msm: Add LLCC for SC7280
soc: qcom: Fix typos in the file qmi_encdec.c
soc: qcom: rpmhpd: Add sc7280 powerdomains
dt-bindings: power: rpmpd: Add sc7280 to rpmpd binding
soc: qcom: rpmhpd: Add SM8350 power domains
dt-bindings: power: Add rpm power domain bindings for SM8350
Link: https://lore.kernel.org/r/20210404164951.713045-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add compatible strings to support the system timer, clocksource, OST,
watchdog and PWM blocks of the JZ4760 and JZ4760B SoCs.
Newer SoCs which behave like the JZ4760 or JZ4760B now see their
compatible string require a fallback compatible string that corresponds
to one of these two SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210308212302.10288-1-paul@crapouillou.net
Apple SoCs run firmware that sets up a simplefb-compatible framebuffer
for us. Add a compatible for it, and two missing supported formats.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
AIC is the Apple Interrupt Controller found on Apple ARM SoCs, such as
the M1.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Not all platforms provide the same set of timers/interrupts, and Linux
only needs one (plus kvm/guest ones); some platforms are working around
this by using dummy fake interrupts. Implementing interrupt-names allows
the devicetree to specify an arbitrary set of available interrupts, so
the timer code can pick the right one.
This also adds the hyp-virt timer/interrupt, which was previously not
expressed in the fixed 4-interrupt form.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This introduces bindings for all three 2020 Apple M1 devices:
* apple,j274 - Mac mini (M1, 2020)
* apple,j293 - MacBook Pro (13-inch, M1, 2020)
* apple,j313 - MacBook Air (M1, 2020)
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is different from the legacy AAPL prefix used on PPC, but
consensus is that we prefer `apple` for these new platforms.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This point in gregkh's tty-next tree includes all the samsung_tty
changes that were part of v3 of the M1 bring-up series, and have
already been merged in.
Signed-off-by: Hector Martin <marcan@marcan.st>
Chanwoo writes:
Update extcon next for v5.13
Detailed description for this pull request:
1. Update extcon provider driver
- Add the support of charging interrupt to detect charger connector
for extcon-max8997.c
- Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c
- Add the support for VBUS detection for extcon-qcom-spmi-misc.c
and replace qcom,pm8941-misc binding document with yaml style.
* tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: qcom-spmi: Add support for VBUS detection
bindings: pm8941-misc: Add support for VBUS detection
bindings: pm8941-misc: Convert bindings to YAML
extcon: sm5502: Detect OTG when USB_ID is connected to ground
extcon: max8997: Add CHGINS and CHGRM interrupt handling
Moritz writes:
Second set of FPGA Manager changes for 5.13-rc1
FPGA Manager:
- Russ' first change improves port_enable reliability
- Russ' second change adds a new device ID for a DFL device
- Geert's change updates the examples in binding with dt overlay sugar
syntax
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: pci: add DID for D5005 PAC cards
dt-bindings: fpga: fpga-region: Convert to sugar syntax
fpga: dfl: afu: harden port enable logic
fpga: Add support for Xilinx DFX AXI Shutdown manager
dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager
fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe()
fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
The general trend is to have devicetree bindings in YAML format, to
allow automatic validation of bindings and devicetrees.
Convert the NPCM SoC family's binding to YAML before it accumulates more
entries.
The nuvoton,npcm750-evb compatible string is introduced to keep the
structure of the binding a little simpler.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210320164023.614059-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
arm64: dts: amlogic updates for v5.13
- new boards: MeCool KII & KIII, Minix NEO U9-H
- used fixed index for MMC devices
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add initial device-tree for MeCool KIII Pro
arm64: dts: meson: add initial device-tree for MeCool KII Pro
dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindings
arm64: dts: amlogic: Assign a fixed index to mmc devices
arm64: dts: meson: add initial device-tree for Minix NEO U9-H
dt-bindings: arm: amlogic: add support for the Minix NEO U9-H
Link: https://lore.kernel.org/r/7h5z10mjpp.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Vinod writes:
phy-for-5.13
- Updates:
- Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and
bcm-ns-usb3 bindings
- Mediatek dsi and hdmi phy updates
- TI j721e-wiz updates for AM64
- Cadence-torrent phy updates for SGMII/QSGMII
- New support:
- usb3-dp phy for Qualcomm SM8250
- UTMI phy for Armada CP110
- USB phy for Qualcomm SC7280
- Binding and driver for Sparx5 ethernet serdes
* tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (75 commits)
phy: fix resource_size.cocci warnings
phy: Sparx5 Eth SerDes: Use direct register operations
phy: hisilicon: Use the correct HiSilicon copyright
phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON
phy: qcom-qmp: add support for sm8250-usb3-dp phy
phy: qcom-qmp: rename common registers
phy: qcom-qmp: move DP functions to callbacks
dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250
dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml
phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMII
dt-bindings: phy: fix dt_binding_check warning in mediatek, ufs-phy.yaml
phy: zynqmp: Handle the clock enable/disable properly
dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml
phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5
phy: cadence-torrent: Add delay for PIPE clock to be stable
phy: cadence-torrent: Explicitly request exclusive reset control
phy: cadence-torrent: Do not configure SERDES if it's already configured
phy: cadence-torrent: Group reset APIs and clock APIs
phy: ti: j721e-wiz: Do not configure wiz if its already configured
...
Vinod writes:
soundwire updates for 5.13-rc1
Updates for v5.13-rc1 are:
Core:
- Ability to add quirks for masters
- static checker cleanup for bus code
Drivers:
- DMI quirks for Intel controllers
- static checker cleanup for drivers
- add auto enumeration support qcom controller
* tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits)
soundwire: intel_init: test link->cdns
soundwire: qcom: handle return correctly in qcom_swrm_transport_params
soundwire: qcom: cleanup internal port config indexing
soundwire: qcom: wait for fifo space to be available before read/write
soundwire: qcom: add static port map support
soundwire: qcom: update port map allocation bit mask
soundwire: add static port mapping support
soundwire: stream: fix memory leak in stream config error path
soundwire: qcom: use signed variable for error return
soundwire: qcom: wait for enumeration to be complete in probe
soundwire: qcom: add auto enumeration support
soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add
soundwire: qcom: add support to new interrupts
soundwire: qcom: update register read/write routine
soundwire: qcom: start the clock during initialization
soundwire: qcom: set continue execution flag for ignored commands
soundwire: qcom: add support to missing transport params
dt-bindings: soundwire: qcom: clarify data port bus parameters
soundwire: cadence: only prepare attached devices on clock stop
soundwire: generic_allocation: fix confusion between group and packing
...
Qualcomm ARM64 DT updates for 5.13
This extends the initial SM8350 description merged in v5.12 with
CPUfreq, SMMU, UFS, RPMHPD, SPMI, USB and remoteproc support. It adds
initial PMIC definitions for the 6 PMICs found on the MTP and it
introduces the new SM8350 Hardware Development Kit (HDK).
SC7180 is further polished, the DisplayPort portion of the QMP phy is
defined and several new SKUs of the Trogdor devices are introduced.
The new SC7280 platform is introduced, with RPMH, RPMHPD, RPMCC, SPMI,
CPU idle, SMMU and watchdog defined.
SDM845 gains the camera related nodes and some cleanups.
For SM8250 it brings some cleanups and migrates SPI0 to use GPIO for
chip select.
* tag 'qcom-arm64-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (79 commits)
arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS
arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
arm64: dts: qcom: sm8250: further split of spi pinctrl config
arm64: dts: qcom: sm8250: split spi pinctrl config
arm64: dts: qcom: sdm845-db845c: Enable ov8856 sensor and connect to ISP
arm64: dts: qcom: sdm845-db845c: Configure regulators for camss node
arm64: dts: qcom: sdm845: Add CAMSS ISP node
arm64: dts: qcom: pm8150: Enable RTC
arm64: dts: qcom: sm8350-mtp: Add PMICs
arm64: dts: qcom: pmr735B: Add base dts file
arm64: dts: qcom: pmr735a: Add base dts file
arm64: dts: qcom: pm8350c: Add base dts file
arm64: dts: qcom: pm8350b: Add base dts file
arm64: dts: qcom: pm8350: Add base dts file
arm64: dts: qcom: pmk8350: Add base dts file
arm64: dts: qcom: sm8350: Add spmi node
arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x
dt-bindings: arm: qcom: Add SM8350 HDK
arm64: dts: qcom: sc7180: Drop duplicate dp_hot_plug_det node in trogdor
arm64: dts: qcom: sm8350: fix number of pins in 'gpio-ranges'
...
Link: https://lore.kernel.org/r/20210404164914.712946-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
- New secondary interrupt controller binding to support the wake-up
- Use the RSB bus instead of I2C for the PMIC on the H6
- HDMI support for the BananaPi M2-Zero
- New board: Topwise A721
* tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: beelink-x2: Add power button
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out
ARM: dts: sun4i: Add support for Topwise A721 tablet
dt-bindings: arm: Add Topwise A721
arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc
arm64: dts: allwinner: Use the new r_intc binding
ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc
ARM: dts: sunxi: h3/h5: Add r_intc node
ARM: dts: sunxi: Use the new r_intc binding
Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).
So let's add a property for declaring such secure regions so that the
drivers can skip touching them.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210402150128.29128-3-manivannan.sadhasivam@linaro.org
Binding covering the ad7150, ad7151 and ad7156 capacitance to digital
convertors. The only difference between these is how many channels they
have (1 or 2)
Whilst it is clearly necessary to provide power to the part, we don't
need to know the voltage or anything so if it is always on, there should
be no need to have it specified in the binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210314181511.531414-24-jic23@kernel.org
Updates binding document since the avc and vp8 hardware encoder in
MT8173 are now separated. Separate "mediatek,mt8173-vcodec-enc" to
"mediatek,mt8173-vcodec-enc-vp8" and "mediatek,mt8173-vcodec-enc".
This patch is not a compatible change, but we must do this modifaction
because MediaTek IOMMU add the device_link between the smi-larb
device and venc_device, if the venc device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
There is a bit of backward compatibility for avc encoder, the avc
encoder device node still has compatible "mediatek,mt8173-vcodec-enc".
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Maoguang Meng <maoguang.meng@mediatek.com>
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Changeset 5e4cdca887 ("dt-bindings: i3c: Convert the bus description to yaml")
renamed: Documentation/devicetree/bindings/i3c/i3c.txt
to: Documentation/devicetree/bindings/i3c/i3c.yaml.
Update the cross-references accordingly.
Fixes: 5e4cdca887 ("dt-bindings: i3c: Convert the bus description to yaml")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
