SPI NOR core changes:
- Add non-uniform erase fixes.
- Add Global Block Unlock command. It is defined by few flash
vendors, and it is used for now just by sst.
SPI NOR controller drivers changes:
- intel-spi: Add support for Intel Alder Lake-P SPI serial flash.
- hisi-sfc: Put child node np on error path.
Qualcomm driver updates for 5.12
The socinfo driver gains support for dumping information about the platform's
PMICs, as well as new definitions for a number of platforms. The LLCC driver
gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains
support for MSM8994 power domains. In addition to this it contains a few minor
fixes in the ocmem, rpmh and llcc drivers.
* tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ocmem: don't return NULL in of_get_ocmem
soc: qcom: socinfo: Remove unwanted le32_to_cpu()
soc: qcom: aoss: Add SM8350 compatible
drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains
soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()
soc: qcom: socinfo: Fix off-by-one array index bounds check
soc: qcom: socinfo: Add MDM9607 IDs
soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998
soc: qcom: socinfo: Add SoC IDs for 630 family
soc: qcom: socinfo: Open read access to all for debugfs
soc: qcom: socinfo: add info from PMIC models array
soc: qcom: socinfo: add several PMIC IDs
soc: qcom: socinfo: add qrb5165 SoC ID
soc: qcom: rpmh: Remove serialization of TCS commands
soc: qcom: smem: use %*ph to print small buffer
dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
drivers: qcom: rpmh-rsc: Do not read back the register write on trigger
soc: qcom: llcc-qcom: Add support for SM8250 SoC
soc: qcom: llcc-qcom: Extract major hardware version
dt-bindings: msm: Add LLCC for SM8250
Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards: Radxa Rock Pi E, NanoPi M4B
More fixed indices for mmc nodes; removal of obsolete amba bus nodes;
nand-flash-controller nodes for px30 and rk3308; rk3399 pcie ranges fix;
board-level fixes for Helios64, NanoPi and Rock960; more sound support
for rock64 and rockpro64 and cleanups to make dt-bindings happier.
* tag 'v5.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
arm64: dts: rockchip: more user friendly name of sound nodes
arm64: dts: rockchip: rename pinctrl nodename to gmac2io for nanopi-r2s board
arm64: dts: rockchip: assign a fixed index to mmc devices on rk3368 boards
arm64: dts: rockchip: assign a fixed index to mmc devices on rk3308 boards
arm64: dts: rockchip: assign a fixed index to mmc devices on px30 boards
arm64: dts: rockchip: cleanup cpu_thermal node of rk3399-rock960.dts
arm64: dts: rockchip: Remove bogus "amba" bus nodes
arm64: dts: rockchip: Light "sys" LED on NanoPi R2S
arm64: dts: rockchip: fix ranges property format for rk3399 pcie node
arm64: dts: rockchip: Rely on SoC external pull up on pmic-int-l on Helios64
arm64: dts: rockchip: Add NanoPi M4B board
arm64: dts: rockchip: Move ep-gpios property to nanopc-t4 from nanopi4
arm64: dts: rockchip: Add NFC node for PX30 SoC
arm64: dts: rockchip: Add NFC node for RK3308 SoC
arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E
dt-bindings: arm: rockchip: Add Radxa ROCK Pi E
arm64: dts: rockchip: rk3328: Add clock_in_out property to gmac2phy node
arm64: dts: rockchip: rename thermal subnodes for rk3399
arm64: dts: rockchip: rename thermal subnodes for rk3368
arm64: dts: rockchip: add SPDIF node for rk3399-rockpro64
...
Link: https://lore.kernel.org/r/12699743.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert the SPI-NOR binding to DT schema format. Like other memory chips,
the compatible strings are a mess with vendor prefixes not being used
consistently and some compatibles not documented. The resulting schema
passes on 'compatible' checks for most in tree users with the exception
of some oddballs.
I dropped the 'm25p.*-nonjedec' compatible strings as these don't appear
to be used anywhere.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210202175340.3902494-1-robh@kernel.org
BCM4908 is a family of SoCs with integrated Ethernet controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the compatible value for the ROHM Semiconductor BR24G01 I2C bus
EEPROM.
While at it, sort the entries alphabetically.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The current PRUSS Interrupt Controller binding doesn't exactly specify
the convention for the node name. These interrupt-controllers will always
have a unit address. Update the binding with the '$nodename' using the
expected generic name, this shall ensure the interrupt-controller.yaml
is automatically applied to this binding.
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210126163251.29468-1-s-anna@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Qualcomm ARM64 DT updates for 5.12
This introduces initial support for the new SM8350 platform, aka
Snapdragon 888, and the MTP device for this.
It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC
support to the SM8250 platform and RB5 in particular, as well as improve
the definition of CPUs, thermal zones and fixes a few smaller issues.
It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone
2 Laser and BQ Aquaris X5, based on the MSM8916 platform.
It contains an overhaul of the existing MSM8992 and MSM8994 platform
files and introduces RPM power domains and SMP2P nodes. It adds
touchscreen, additional regulators, microSD card support and adds the
Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common
parts of the Lumia 950 and 950XL and extend these with support for
sensors, NFC, bluetooth, audio, microSD and Type-C mux pins.
It introduces support for the OnePlus6 and 6t, adds the missing higher
frequences for the SDM850 laptops, adds CPU cluster idle support on
SM8150 and a few tweaks to the SC7180 platform.
* tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (100 commits)
arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels
arm64: dts: qcom: msm8996: Add missing device_type under pcie[01]
arm64: dts: qcom: sc7180: Add support for gpu fuse
arm64: dts: qcom: msm8998: Disable some components by default
arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores
arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming
arm64: dts: qcom: msm8998: Add DMA to I2C hosts
arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi
arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors
arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec
arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5
arm64: dts: qcom: msm8994-octagon: Add NXP NFC node
arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes
arm64: dts: qcom: msm8994-octagon: Configure PON keys
arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA
arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC
arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins
arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth
arm64: dts: qcom: msm8994-octagon: Configure regulators
...
Link: https://lore.kernel.org/r/20210204052043.388621-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"make dtbs_check" complains that the number of interconnect-cells
for some RPMh platforms is not "const: 1" (as defined in the schema).
That's because the interconnect-cells now can be 1 or 2, depending
on what is supported by the specific interconnect provider. Let's
reflect this in the schema.
Fixes: 9a34e7ad2e ("dt-bindings: interconnect: Document the support of optional path tag")
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20210121145320.2383-1-georgi.djakov@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
In 7497d4a66c ("hwmon: (gsc-hwmon) add fan sensor") a mode
was added to report RPM's from a fan tach input.
Add this mode to the dt-bindings for the Gateworks System Controller.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
According to the definition in leds-pwm.yaml, the node name of each LED
must match the regular expression "^led(-[0-9a-f]+)?$". "led" or "led-"
followed by a decimal or hexadecimal ID number.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip SoC dtsi files only
the fallback string "snps,dw-wdt" is used, so add the following
compatible strings:
"rockchip,px30-wdt", "snps,dw-wdt"
"rockchip,rk3228-wdt", "snps,dw-wdt"
"rockchip,rk3308-wdt", "snps,dw-wdt"
"rockchip,rk3328-wdt", "snps,dw-wdt"
"rockchip,rk3399-wdt", "snps,dw-wdt"
"rockchip,rv1108-wdt", "snps,dw-wdt"
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20201218120534.13788-1-jbx6244@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
