a5c6d65093
12372 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
|
06dd3dfeea |
Char/Misc patches for 4.17-rc1
Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - and a handfull of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsShSQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykNqwCfUbfvopswb1PesHCLABDBsFQChgoAniDa6pS9 kI8TN5MdLN85UU27Mkb6 =BzFR -----END PGP SIGNATURE----- Merge tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc driver patches for 4.17-rc1. There are a lot of little things in here, nothing huge, but all important to the different hardware types involved: - thunderbolt driver updates - parport updates (people still care...) - nvmem driver updates - mei updates (as always) - hwtracing driver updates - hyperv driver updates - extcon driver updates - ... and a handful of even smaller driver subsystem and individual driver updates All of these have been in linux-next with no reported issues" * tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits) hwtracing: Add HW tracing support menu intel_th: Add ACPI glue layer intel_th: Allow forcing host mode through drvdata intel_th: Pick up irq number from resources intel_th: Don't touch switch routing in host mode intel_th: Use correct method of finding hub intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate stm class: Make dummy's master/channel ranges configurable stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate MAINTAINERS: Bestow upon myself the care for drivers/hwtracing hv: add SPDX license id to Kconfig hv: add SPDX license to trace Drivers: hv: vmbus: do not mark HV_PCIE as perf_device Drivers: hv: vmbus: respect what we get from hv_get_synint_state() /dev/mem: Avoid overwriting "err" in read_mem() eeprom: at24: use SPDX identifier instead of GPL boiler-plate eeprom: at24: simplify the i2c functionality checking eeprom: at24: fix a line break eeprom: at24: tweak newlines eeprom: at24: refactor at24_probe() ... |
||
|
df34df483a |
Staging/IIO patches for 4.17-rc1
Here is the big set of Staging/IIO driver patches for 4.17-rc1. It is a lot, over 500 changes, but not huge by previous kernel release standards. We deleted more lines than we added again (27k added vs. 91k remvoed), thanks to finally being able to delete the IRDA drivers and networking code. We also deleted the ccree crypto driver, but that's coming back in through the crypto tree to you, in a much cleaned-up form. Added this round is at lot of "mt7621" device support, which is for an embedded device that Neil Brown cares about, and of course a handful of new IIO drivers as well. And finally, the fsl-mc core code moved out of the staging tree to the "real" part of the kernel, which is nice to see happen as well. Full details are in the shortlog, which has all of the tiny cleanup patches described. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSnAA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yn60ACgxKvU/5XBP14hBkBpAcD0Q43OHe0AniEti65M Kw03GWK3NNM3pzk49BjZ =sj3K -----END PGP SIGNATURE----- Merge tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big set of Staging/IIO driver patches for 4.17-rc1. It is a lot, over 500 changes, but not huge by previous kernel release standards. We deleted more lines than we added again (27k added vs. 91k remvoed), thanks to finally being able to delete the IRDA drivers and networking code. We also deleted the ccree crypto driver, but that's coming back in through the crypto tree to you, in a much cleaned-up form. Added this round is at lot of "mt7621" device support, which is for an embedded device that Neil Brown cares about, and of course a handful of new IIO drivers as well. And finally, the fsl-mc core code moved out of the staging tree to the "real" part of the kernel, which is nice to see happen as well. Full details are in the shortlog, which has all of the tiny cleanup patches described. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits) staging: rtl8723bs: Remove yield call, replace with cond_resched() staging: rtl8723bs: Replace yield() call with cond_resched() staging: rtl8723bs: Remove unecessary newlines from 'odm.h'. staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style. staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style. staging: rtl8723bs: Replace NULL pointer comparison with '!'. staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections. staging: rtl8723bs: Fix function signature that goes over 80 characters. staging: rtl8723bs: Fix lines too long in update_recvframe_attrib(). staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'. staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'. staging: rtl8723bs: Add missing braces in else statement. staging: rtl8723bs: Add spaces around ternary operators. staging: rtl8723bs: Fix lines with trailing open parentheses. staging: rtl8723bs: Remove unnecessary length #define's. staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants. staging: rtl8723bs: Fix alignment in rtw_wx_set_auth(). staging: rtl8723bs: Remove braces from single statement conditionals. staging: rtl8723bs: Remove unecessary braces from switch statement. staging: rtl8723bs: Fix newlines in rtw_wx_set_auth(). ... |
||
|
9abf8acea2 |
TTY/Serial driver patches for 4.17-rc1
Here is the big set of tty and serial driver patches for 4.17-rc1 Not all that big really, most are just small fixes and additions to existing drivers. There's a bunch of work on the imx serial driver recently for some reason, and a new embedded serial driver added as well. Full details are in the shortlog. All of these have been in the linux-next tree for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSn+w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynb6wCdEf5dAUrSB37ptZY78n4kc6nI6NAAniDO+rjL ppZZp7QTIB/bnPfW8cOH =+tfY -----END PGP SIGNATURE----- Merge tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver patches for 4.17-rc1 Not all that big really, most are just small fixes and additions to existing drivers. There's a bunch of work on the imx serial driver recently for some reason, and a new embedded serial driver added as well. Full details are in the shortlog. All of these have been in the linux-next tree for a while with no reported issues" * tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits) serial: expose buf_overrun count through proc interface serial: mvebu-uart: fix tx lost characters tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe() tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP 8250-men-mcb: add support for 16z025 and 16z057 powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused serial: stm32: fix initialization of RS485 mode ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards vt: change SGR 21 to follow the standards serdev: Fix typo in serdev_device_alloc ARM: dts: STi: Fix aliases property name for STi boards tty: st-asc: Update tty alias serial: stm32: add support for RS485 hardware control mode dt-bindings: serial: stm32: add RS485 optional properties selftests: add devpts selftests devpts: comment devpts_mntget() devpts: resolve devpts bind-mounts devpts: hoist out check for DEVPTS_SUPER_MAGIC serial: 8250: Add Nuvoton NPCM UART serial: mxs-auart: disable clks of Alphascale ASM9260 ... |
||
|
ac9053d2dc |
USB/PHY patches for 4.17-rc1
Here is the big set of USB and PHY driver patches for 4.17-rc1. Lots of USB typeC work happened this round, with code moving from the staging directory into the "real" part of the kernel, as well as new infrastructure being added to be able to handle the different types of "roles" that typeC requires. There is also the normal huge set of USB gadget controller and driver updates, along with XHCI changes, and a raft of other tiny fixes all over the USB tree. And the PHY driver updates are merged in here as well as they interacted with the USB drivers in some places. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWsSpJw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylGawCdED2xS3HUxOIqfh81d8B1py8ji04AoJXdLAsH JgwXbdbibZBabYTVi5s5 =LrRH -----END PGP SIGNATURE----- Merge tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 4.17-rc1. Lots of USB typeC work happened this round, with code moving from the staging directory into the "real" part of the kernel, as well as new infrastructure being added to be able to handle the different types of "roles" that typeC requires. There is also the normal huge set of USB gadget controller and driver updates, along with XHCI changes, and a raft of other tiny fixes all over the USB tree. And the PHY driver updates are merged in here as well as they interacted with the USB drivers in some places. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits) Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" usb: musb: gadget: misplaced out of bounds check usb: chipidea: imx: Fix ULPI on imx53 usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag usb: chipidea: usbmisc: small clean up usb: chipidea: usbmisc: evdo can be set e/o reset usb: chipidea: usbmisc: evdo is only specific to OTG port USB: serial: ftdi_sio: add Id for Physik Instrumente E-870 usb: dwc3: gadget: never call ->complete() from ->ep_queue() usb: gadget: udc: core: update usb_ep_queue() documentation usb: host: Remove the deprecated ATH79 USB host config options usb: roles: Fix return value check in intel_xhci_usb_probe() USB: gadget: f_midi: fixing a possible double-free in f_midi usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks usb: core: Copy parameter string correctly and remove superfluous null check USB: announce bcdDevice as well as idVendor, idProduct. USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw usb: hub: Reduce warning to notice on power loss USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator USB: serial: cp210x: add ELDAT Easywave RX09 id ... |
||
|
9eb31227cb |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - add AEAD support to crypto engine - allow batch registration in simd Algorithms: - add CFB mode - add speck block cipher - add sm4 block cipher - new test case for crct10dif - improve scheduling latency on ARM - scatter/gather support to gcm in aesni - convert x86 crypto algorithms to skcihper Drivers: - hmac(sha224/sha256) support in inside-secure - aes gcm/ccm support in stm32 - stm32mp1 support in stm32 - ccree driver from staging tree - gcm support over QI in caam - add ks-sa hwrng driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits) crypto: ccree - remove unused enums crypto: ahash - Fix early termination in hash walk crypto: brcm - explicitly cast cipher to hash type crypto: talitos - don't leak pointers to authenc keys crypto: qat - don't leak pointers to authenc keys crypto: picoxcell - don't leak pointers to authenc keys crypto: ixp4xx - don't leak pointers to authenc keys crypto: chelsio - don't leak pointers to authenc keys crypto: caam/qi - don't leak pointers to authenc keys crypto: caam - don't leak pointers to authenc keys crypto: lrw - Free rctx->ext with kzfree crypto: talitos - fix IPsec cipher in length crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array() crypto: doc - clarify hash callbacks state machine crypto: api - Keep failed instances alive crypto: api - Make crypto_alg_lookup static crypto: api - Remove unused crypto_type lookup function crypto: chelsio - Remove declaration of static function from header crypto: inside-secure - hmac(sha224) support crypto: inside-secure - hmac(sha256) support .. |
||
|
5b1f3dc927 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner: "The usual pile of boring changes: - Consolidate tasklet functions to share code instead of duplicating it - The first step for making the low level entry handler management on multi-platform kernels generic - A new sysfs file which allows to retrieve the wakeup state of interrupts. - Ensure that the interrupt thread follows the effective affinity and not the programmed affinity to avoid cross core wakeups. - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm PDC) - Fix the wakeup path clock handling for Reneasas interrupt chips. - Rework the boot time register reset for ARM GIC-V2/3 - Better suspend/resume support for ARM GIV-V3/ITS - Add missing locking to the ARM GIC set_type() callback - Small fixes for the irq simulator code - SPDX identifiers for the irq core code and removal of boiler plate - Small cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) openrisc: Set CONFIG_MULTI_IRQ_HANDLER arm64: Set CONFIG_MULTI_IRQ_HANDLER genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER irqchip/gic: Take lock when updating irq type irqchip/gic: Update supports_deactivate static key to modern api irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling irqchip: Add a driver for the Microsemi Ocelot controller dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn irqchip/gic-v3: Don't try to reset AP0Rn irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs genirq: Remove license boilerplate/references genirq: Add missing SPDX identifiers genirq/matrix: Cleanup SPDX identifier genirq: Cleanup top of file comments genirq: Pass desc to __irq_free instead of irq number irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER ... |
||
|
a23867f1d2 |
Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: "Nothing too interesting. The biggest change is refcnting fix for ata_host - the bug is recent and can only be triggered on controller hotplug, so very few are hitting it. There also are a number of trivial license / error message changes and some hardware specific changes" * 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits) ahci: imx: add the imx8qm ahci sata support libata: ensure host is free'd on error exit paths ata: ahci-platform: add reset control support ahci: imx: fix the build warning ata: add Amiga Gayle PATA controller driver ahci: imx: add the imx6qp ahci sata support ata: change Tegra124 to Tegra ata: ahci_tegra: Add AHCI support for Tegra210 ata: ahci_tegra: disable DIPM ata: ahci_tegra: disable devslp for Tegra124 ata: ahci_tegra: initialize regulators from soc struct ata: ahci_tegra: Update initialization sequence dt-bindings: Tegra210: add binding documentation libata: add refcounting to ata_host pata_bk3710: clarify license version and use SPDX header pata_falcon: clarify license version and use SPDX header pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command() pata_macio: Delete an error message for a failed memory allocation in two functions pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe() sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start() ... |
||
|
ef1c4a6fa9 |
media updates for v4.17-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaw1yeAAoJEAhfPr2O5OEVDDgQAIYpin6obedJOm7zIm741Q0S fS2FL2pygyvHlVtU20ERHgvM6aD5tujekpDM4+GNgnq0aAabxvqBvdohmHQjyVSw FgszgY6kQSnI8S4Oy9RB8H/MFRq7Wz9Qf+KmJh0SfuUoMzBe2A40yLjYQ+sAMJr9 mm0ijxxRpFYikVtIBgKDbjnx6wdkOs12M7YlJuI8N/tMBHMt+p2EfvqcX6GF725i sgLGcMsTJr1sUSyY8vnM2pAlKfZL2tZqigx5f9sB4UM7uHSw/oL/a/8I+t6Mju1X J1BD3L7UtTpwqO9sAR5BsJQ+0pAkXNOF+eLGs2p9rx4sO0DOLKoUptMI+YryvE86 /SOlTskSSAeX/rBFyZJw1zv0/9mdGrHoyCy0q/lfDkD/mQkrUJDDZ7GPLqZ9rLUe 2cXn1xMWB/soeR70oTyew0D2SZkp6y4DQr0Rwje7V8/SOWMmJvhaVIWhVIP9ZrS6 AvCS7WUYTTVIX+td2glnLkJ5SaXXJyRYv8Utp/TUrYvCFOX7wsk7F0pRY4PE4PeZ BL7Bl8H9l3HGWWhdqPvw+ETdJgcbq/IwVUcpuuEPjkhDZEqHz//vzwoPt1nT4v6M gfqfaW5LaYuj0MYYqyxZMDwP3FWk4SsQ0NZzmaFs+yfE17bcWUMuf3ZVJtjmLxzk RUo0E/7RZsrw7LkCy0KF =bzhS -----END PGP SIGNATURE----- Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new CEC pin injection code for testing purposes - DVB frontend cxd2099 promoted from staging - new platform driver for Sony cxd2880 DVB devices - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x, tw9910.c - removal of unused cx18 and ivtv alsa mixers - the reneseas-ceu driver doesn't depend on soc_camera anymore and moved from staging - removed the mantis_vp3028 driver, unused since 2009 - s5p-mfc: add support for version 10 of the MSP - added a decoder for imon protocol - atomisp: lots of cleanups - imx074 and mt9t031: don't depend on soc_camera anymore, being promoted from staging - added helper functions to better support DVB I2C binding - lots of driver improvements and cleanups * tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits) media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd) media: fimc-capture: get rid of two warnings media: dvb-usb-v2: fix a missing dependency of I2C_MUX media: uvc: to the right check at uvc_ioctl_enum_framesizes() media: cec-core: fix a bug at cec_error_inj_write() media: tda9840: cleanup a warning media: tm6000: avoid casting just to print pointer address media: em28xx-input: improve error handling code media: zr364xx: avoid casting just to print pointer address media: vivid-radio-rx: add a cast to avoid a warning media: saa7134-alsa: don't use casts to print a buffer address media: solo6x10: get rid of an address space warning media: zoran: don't cast pointers to print them media: ir-kbd-i2c: change the if logic to avoid a warning media: ir-kbd-i2c: improve error handling code media: saa7134-input: improve error handling media: s2255drv: fix a casting warning media: ivtvfb: Cleanup some warnings media: videobuf-dma-sg: Fix a weird cast soc_camera: fix a weird cast on printk ... |
||
|
5bb053bef8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ... |
||
|
cc5ada7ca3 |
Mostly small changes, as usual.
This does add an IPMI BMC server-side driver, to allow a Linux system to act as an IPMI controller. That's the biggest change, but it is just a new driver that is fairly narrow in use. The other largish change is removing ACPI SPMI probe support, which should have never really been there in the beginning. -corey -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaw8XOAAoJEGHzjJCRm/+BeoQQAIBokkgHSAl6y8jlmmTmu9fV gXl0GT97yAMyuTUaTvkWLdWm8GWCrSSUTAqjbcTzMWya87KRODsUg9eTO58fFw8m ODbD7ruTGmBQggJEqDaS5NHAiU22ce2aDn5I0WjJkH8vaJ3nQSa6nEgBOzXDMC1A OmaVQE6BnEAIA+nmlzbUgcuduB3iv7gTua2gy7MQSG/5jBPIAOQtpsgHtCZMA+Dt bk9LqDpOa6dZry7eIn5/u62YRVLX+iVO/DoxCgZyOxVfgnV/ykKT3PvWO9vviBQV QXXLAzLO3niDQ/ZwwpqrUWjR7oGWDKe4ntMATfnxCP7LQNrSF7LnAxz8oCcwuBxq ELrwME8LEQmMYGFg3SYcLA0k1teTP2UVWURUH6zBTft2xzo8bJN0JU7J52tTL4xa yC7JgTVeq8uQB8gkYKf43LGHlXlaxFQsnRKeCJ2JG+1yD+sOmxbZshfiLroMZ5DM nPKOuMdoqPCd7JVUMs/c0IgcDHd6vtkiDRA0jh38JdIdp9B/i+dFYs61bSzrkBD9 tXUua56QTVl5WEWy2lGX+ZH/JUJbQnTxjiaW99Q9Soml6qXqIVjR5ZvLtls0PeW0 ZytaQEGuV8758YEmOGk/1pUys/oC37mDlyjTpONGYzvAyzJqU258/YU9eJMkcQ/G FFEEkWILLuGgtFnyxwN/ =p993 -----END PGP SIGNATURE----- Merge tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Mostly small changes, as usual. This does add an IPMI BMC server-side driver, to allow a Linux system to act as an IPMI controller. That's the biggest change, but it is just a new driver that is fairly narrow in use. The other largish change is removing ACPI SPMI probe support, which should have never really been there in the beginning" * tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi: ipmi/parisc: Add IPMI chassis poweroff for certain HP PA-RISC and IA-64 servers ipmi_ssif: Fix kernel panic at msg_done_handler ipmi:pci: Blacklist a Realtek "IPMI" device ipmi: Remove ACPI SPMI probing from the system interface driver ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driver ipmi: missing error code in try_smi_init() ipmi: use ARRAY_SIZE for poweroff_functions array sizing calculation ipmi: Consolidate cleanup code ipmi: Remove some unnecessary initializations ipmi: Fix some error cleanup issues ipmi: Add or fix SPDX-License-Identifier in all files ipmi: Re-use existing macros for built-in properties ipmi:pci: Make the PCI defines consistent with normal Linux ones ipmi: kcs_bmc: coding-style fixes and use new poll type char/ipmi: add documentation for sysfs interface ipmi: kcs_bmc: mark expected switch fall-through in kcs_bmc_handle_data ipmi: add an Aspeed KCS IPMI BMC driver ipmi: add a KCS IPMI BMC driver |
||
|
77624cd2a7 |
Pin control bulk changes for the v4.17 kernel cycle:
New drivers: - Qualcomm SDM845: this is their new flagship SoC platform which seems to be targeted at premium mobile handsets. - Renesas R-Car M3-N SoC. - Renesas R8A77980 SoC. - NXP (ex Freescale) i.MX 6SLL SoC. - Mediatek MT2712 SoC. - Allwinner H6 SoC. Improvements: - Uniphier adds a few new functions and pins. - Renesas refactorings and additional pin definitions. - Improved pin groups for Axis Artpec6. Cleanup: - Drop the TZ1090 drivers. This platform is no longer maintained and is being deleted. - Drop ST-Ericsson U8540/U9540 support as this was never productified. - Overall minor fixes and janitorial. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJawz1oAAoJEEEQszewGV1zWUUQAJEIXW0vEsgwwFCIQYrKZBbi ovfQtpPgv5wbRmvLy/IaIFvO7eFedlOqjLTU0a3wuFZdHn9y0VkebVOjdG97TTeF g4fyqQ7pzdCKmxlDMm4zcOUycho9ZMa8lG3tKdyxI4tal6ygl81BypzKVi/WIxLA po2Vr1MHfKicWyPbgD1VRJV6oSzXSOMFkEcPUqx+6m5OM/GTKTKasU/fa4uu12jI OHF1TVr9glMbPiU0wC8bvKilgXCxhDYMYf1JCaxojr0Rt/DlR2vBgbfU7dIeRtO1 MJ1nyJm0yZQfN/bBV1roSg/GGRS3jGbdHDzMnK8pI6LJNJYRa6vfLD/NHKUciSnf 5cgpWloyvR+rbfObr6CYTirKE7iGBYvAH+do2TwmfvfwUYOI9lnbJrtnqtIovdVA R5FxrvI/Ol/j2t4V5wZGC1BBDsC6GH/1YV+W+n9fwKMdDIRgEsOTFsCNEWmSShWP Z53NzyZRVL32RK35g3WEqicfXOtmw3XXuHJZqWjlmXyVitEElMAVWySd6oG0HhvU sdRaoVGjXL9EVM3iZrqHtaRazRjItBA2CFnloC1PVjwi+dkHDcwWDvtOur+AF3wz VORi0xlWXd0Gzolo/ccsk7JUVmrkfCDnZx9uiTKQ+jgiSDfoEuQOvBfTI6LdeoNY upTZIfEhR/dMcjcdKIKe =IT6S -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "New drivers: - Qualcomm SDM845: this is their new flagship SoC platform which seems to be targeted at premium mobile handsets. - Renesas R-Car M3-N SoC. - Renesas R8A77980 SoC. - NXP (ex Freescale) i.MX 6SLL SoC. - Mediatek MT2712 SoC. - Allwinner H6 SoC. Improvements: - Uniphier adds a few new functions and pins. - Renesas refactorings and additional pin definitions. - Improved pin groups for Axis Artpec6. Cleanup: - Drop the TZ1090 drivers. This platform is no longer maintained and is being deleted. - Drop ST-Ericsson U8540/U9540 support as this was never productified. - Overall minor fixes and janitorial" * tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: uniphier: add UART hardware flow control pin-mux settings pinctrl: sunxi: add support for the Allwinner H6 main pin controller pinctrl: sunxi: change irq_bank_base to irq_bank_map pinctrl: sunxi: introduce IRQ bank conversion function pinctrl: sunxi: refactor irq related register function to have desc pinctrl: msm8998: Remove owner assignment from platform_driver pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings pinctrl/amd: poll InterruptEnable bits in enable_irq pinctrl: ocelot: fix gpio direction pinctrl: mtk: fix check warnings. pintcrl: mtk: support bias-disable of generic and special pins simultaneously pinctrl: add mt2712 pinctrl driver pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0 pinctrl: imx: Add pinctrl driver support for imx6sll dt-bindings: imx: update pinctrl doc for imx6sll pinctrl: intel: Implement intel_gpio_get_direction callback pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency pinctrl: mediatek: mtk-common: use true and false for boolean values pinctrl: sunxi: always look for apb block ... |
||
|
dc73d6a8d4 |
MMC core:
- Export host capabilities through debugfs - Export card RCA register via sysfs - Improve card initializing sequence while enabling 4-bit bus - Export a function to enable/disable wakeup for card detect IRQ MMC host: - dw_mmc: Add support for new hi3798cv200 variant - dw_mmc: Remove support for some deprecated DT properties - mediatek: Add support for new variant used on MT7622 SoC - sdhci: Improve wakeup support for SDIO IRQs - sdhci: Improve wakeup support for card detect IRQs - sdhci-omap: Add tuning support - sdhci_omap: Add UHS-I mode support - sunxi: Prepare for runtime PM support via a few re-factorings - tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property - tmio/renesas_sdhi: Consolidate code supporting write protect - tmio: Improve DMA vs PIO handling - tmio: Add support for IP-builtin card detection logic -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaw0MuAAoJEP4mhCVzWIwpW78P/2N2qPt21OfvnIbSexY1nyPd 5+rjScgy+oTUnNxITA9LOnM4P6Wg/9PgvhjUdNdHzd5ZaXIchw372+Xu6hZHdujI vBfnpsI/xtyL1TQ6nvJc9b+Sp4W4LL2MlCqxi+btAKLvTAU3NNm7uJRRP6xRNDd5 8wcsCoIN4C3k5hmh5++DDLCfuzpwmbC1cEbGtL/QEV9xeCY5+fJq4Qpq14L2TJ0g LeDls3X4HAJa3SsgSGOdNr8rttKUSS+j7i1XsShHMyq89DD21PJ8fvMhdzlXJub9 A4PatcOXALS/Xd2YVjeLHrRRlTitssD+Sllt46NsB4eJJOO+DempecY+i0WoW60y p9IUSSX86yokGoyweiL2GI0Ja1Bg8xgdzTGVbfZ6w6UKHjQAcItnojyMghDM5+zt VjDIU59rzm+BEDqcktsbGgLPjOZ0ZWgJPPp2NPkechxsojvCJ9Smm6yPjzaUnZ60 U9PxsYbs4NB+nE9iKDioyA1ABP0N+BloUkTf/cVHdPBBPMmOyI7jYEDS7mqollZU bQCFx+BqcQMbnvI/TZxNDTr4HsiyiXJa0GTCB77sge8tZdcUTjUsWyhc+BYpIqgA 68/dlwTcawSXDliup5XxtYcAjGugtHbPnS/39uBXvscqWVej1WI5RTyzKdC/hnos BP5uz0K1Wic1Dl+jqlWc =2Pd6 -----END PGP SIGNATURE----- Merge tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Export host capabilities through debugfs - Export card RCA register via sysfs - Improve card initializing sequence while enabling 4-bit bus - Export a function to enable/disable wakeup for card detect IRQ MMC host: - dw_mmc: Add support for new hi3798cv200 variant - dw_mmc: Remove support for some deprecated DT properties - mediatek: Add support for new variant used on MT7622 SoC - sdhci: Improve wakeup support for SDIO IRQs - sdhci: Improve wakeup support for card detect IRQs - sdhci-omap: Add tuning support - sdhci_omap: Add UHS-I mode support - sunxi: Prepare for runtime PM support via a few re-factorings - tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property - tmio/renesas_sdhi: Consolidate code supporting write protect - tmio: Improve DMA vs PIO handling - tmio: Add support for IP-builtin card detection logic" * tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (55 commits) mmc: renesas_sdhi: replace EXT_ACC with HOST_MODE mmc: update sdio_claim_irq documentation mmc: Export host capabilities to debugfs. mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards mmc: block: fix updating ext_csd caches on ioctl call mmc: sunxi: Set our device drvdata earlier mmc: sunxi: Move the reset deassertion before enabling the clocks mmc: sunxi: Move resources management to separate functions mmc: dw_mmc: add support for hi3798cv200 specific extensions of dw-mshc dt-bindings: mmc: add bindings for hi3798cv200-dw-mshc mmc: core: Export card RCA register via sysfs mmc: renesas_sdhi: fix WP detection mmc: core: Use memdup_user() rather than duplicating its implementation mmc: dw_mmc-rockchip: correct property names in debug mmc: sd: Remove redundant err assignment from mmc_read_switch mmc: sdio: Check the return value of sdio_enable_4bit_bus mmc: core: Don't try UHS-I mode if 4-bit mode isn't supported arm64: dts: hi3660: remove 'num-slots' property for dwmmc ARM: dts: lpc18xx: remove 'num-slots' property for dwmmc arm64: dts: stratix10: remove 'num-slots' property for dwmmc ... |
||
|
3ac684b881 |
power supply and reset changes for the v4.17 series
* Microsemi Ocelot reset support * Spreadtrum SC27xx reset support * generic gpio charger: lot's of cleanups * axp20x fuel gauge: add AXP813 support * misc. fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlrCZVQACgkQ2O7X88g7 +ppKgQ/8Cmgfta6nX5N8U3jAbBmduFkxmV+WaVE2yMned7ABL5ZAXBOBIDXW0Cvk yFNhu4fgpb2tDW/NEsYiyu61ES7F4W+q0AlvTNaPcM4oh+j8+E3B8C26qUaojw7E rB5FrRJA7/1RQeBl8RrWplT3bmYyL8qPrEca3hPPrrVPYsvf7TqJlgJRqOEu5bIG GBcU+aPZsd6T0u3SloErm0LL9Q4S6YpuW/gqR69azcQUacfalA7kjZ5gpiN9YXYq xSsm3zoJl77x4HTAnKN+7Kzyl3gugKJXIN8kN19F9iYwpc3ccii9FROrx7T3trps nUojvRorlZHawwAOYxp/6C21u6N7SXZ+TyVnPWgjP24Fr7DI5OxqWEZ8fZqaN7M4 nNjhZYpquJDwgg63E1WoA3aPOUCQp7ZLz2xKUWuwX6n1zXr/R3qVeguFPORvhp9Q uu9nfoZXo5ThVz5JK5eGP7pE1OU/qpnzF2ZLHyeNULjAJcnxQjNzN2nTG35IxiO0 BKlYmy31GcMwooRqarJrKavzMU1xGKZtIGxOm6uIluqA1cGfH+8ahk84tzLgYAZ4 4MYnPjDyR31gzt9AB3eb7wGo+TP7djnIzeooeyz8Q71oNcCx263QgrmaKcPZjQtm QcLA+/jyGNg0T5t6l2Kj7mLKNdiGb6bHMqMs5KrezTruJcDhlRg= =VY8H -----END PGP SIGNATURE----- Merge tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - Microsemi Ocelot reset support - Spreadtrum SC27xx reset support - generic gpio charger: lot's of cleanups - axp20x fuel gauge: add AXP813 support - misc fixes, including one devicetree change for the Nokia N900, that has been Acked-by Tony Lindgren * tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (27 commits) power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging functions power: reset: at91-poweroff: Remove redundant dev_err call in at91_poweroff_probe() power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging functions power: reset: make function sc27xx_poweroff_shutdown static power: supply: da9150-fg: remove VLA usage ARM: dts: omap3-n900: Add link between battery and charger power: supply: bq2415x: add DT referencing support power: supply: bq27xxx: support missing supplier device max17042: propagate of_node to power supply device power: supply: axp288_fuel_gauge: Fix full status reporting power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA power: reset: gpio-poweroff: Support for timeout from device property dt-bindings: power: reset: gpio-poweroff: Add 'timeout-ms' property power: reset: Add Spreadtrum SC27xx PMIC power off support power: supply: axp20x_battery: add support for AXP813 dt-bindings: power: supply: axp20x: add AXP813 battery DT binding power: supply: axp20x_battery: use data struct for variant specific code power: supply: gpio-charger: Remove pdata from gpio_charger power: supply: gpio-charger: Use GPIOF_ACTIVE_LOW for legacy setup power: supply: gpio-charger: Remove redundant dev_err call in probe function ... |
||
|
75dcc7ef95 |
spi: SPI updates for v4.17
A quiet release for SPI, some fixes and small updates for individual drivers with one bigger change from Linus Walleij which coverts the bitbanging SPI driver to use the GPIO descriptor API from Linus Walleij. Since GPIO descriptors were used by platform data this means there's a few changes in arch/ making relevant updates for a few platforms and one misc driver that are affected. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCYDYTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0DXhB/9Hueo2D1Pku0iAwq+yIAPvk2N0fyGP YWJWbDQGngSZEnU3dUzdfaOHh4MMiMgs0q8hxOYnmkIhhTs7cXsPj8x6rlZP8bee TtSEEgHSuHlVWyADquFIel8OCq8BWd7p4aQKqP3LaojCH/wqswxtn4I+RH/xw1Rd LIPgU12fxGUpRMO7uGNiMhqqkQDH1ZBFzCUYRPqQk2E+5hyZraQYoROgZkEBPzb1 EWjLxLxytj/Zj4N5eQkW4BWfX5HKJb9CpwKIIdyNuybr14yC5FR83VxOf9wW4/pG 39DIn8LtGTkuMRF4Yw5rPlC9KqnLpUDTnQCcOW4lt+z8QtZQ+LP3boxE =xNln -----END PGP SIGNATURE----- Merge tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull SPI updates from Mark Brown: "A quiet release for SPI, some fixes and small updates for individual drivers with one bigger change from Linus Walleij which coverts the bitbanging SPI driver to use the GPIO descriptor API from Linus Walleij. Since GPIO descriptors were used by platform data this means there's a few changes in arch/ making relevant updates for a few platforms and one misc driver that are affected" * tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (24 commits) MAINTAINERS: update Andi's e-mail spi: spi-atmel: Use correct enum for DMA transfer direction spi: sh-msiof: Document R-Car M3-N support spi: sh-msiof: Use correct enum for DMA transfer direction spi: sprd: Add the support of restarting the system spi: sprd: Simplify the transfer function spi: Fix unregistration of controller with fixed SPI bus number spi: rspi: use correct enum for DMA transfer direction spi: jcore: disable ref_clk after getting its rate spi: bcm-qspi: fIX some error handling paths spi: pxa2xx: Disable runtime PM if controller registration fails spi: tegra20-slink: use true and false for boolean values spi: Fix scatterlist elements size in spi_map_buf spi: atmel: init FIFOs before spi enable spi: orion: Prepare space for per-child options spi: orion: Make the error message greppable spi: orion: Rework GPIO CS handling spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc spi: spi-gpio: Augment device tree bindings spi: spi-gpio: Rewrite to use GPIO descriptors ... |
||
|
b51c4354df |
regulator: Updates for v4.17
A very small set of updates for the regulator API this time around, there's a few bug fixes and also: - Conversion of the regulator API to use GPIO descriptors rather than numbers from Linus Walleij. - New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlrCWysTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0GRNB/46x233PDi9o0GWsVYyCy5BLwINq9xC K1pPNoTWN9BS6VkDwaQIXOXS0qIjf5OCMCFLcAc1wncGVQDEUUNb8ndDYb+zLksn Ra5n8vX5qmWHdZHyecy8gFqHzLbsNUvR0E62vtghsGSuM2EeKNcHOCnd852TkcF6 Bh9GKHXIDvQcos1bHBTbkRfb/CM4uF9rzN38NdTiyxYVqvhdBbo4h33tcuKHrvHn vO3tkrnhUvDdX9YNbhIal/qecouX3KsZZuLdHt/l8ygSx2eoVEzdoA9uyvU9rywe FZkc45DIYYH7Yz+faFHVRMU4oBN8jwalVjlGTWBD8Iyje+BT2w0eFUCJ =/rLA -----END PGP SIGNATURE----- Merge tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A very small set of updates for the regulator API this time around, there's a few bug fixes and also: - Conversion of the regulator API to use GPIO descriptors rather than numbers from Linus Walleij. - New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998" * tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom: smd: Add pm8998 and pmi8998 regulators regulator: core: Add missing blank line between functions regulator: qcom_smd: Drop regulator/{machine,of_regulator} includes regulator: giving regulator controlling gpios a non-empty label when used through the devicetree. regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()' regulator: 88pg86x: new i2c dual regulator chip regulator: 88pg86x: add DT bindings document regulator: da9211: Pass descriptors instead of GPIO numbers regulator: da9055: Pass descriptor instead of GPIO number regulator: core: Support passing an initialized GPIO enable descriptor regulator: dt: regulator-name is required property regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()' |
||
|
f2d285669a |
Power management updates for 4.17-rc1
- Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring). -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJawgTUAAoJEILEb/54YlRxI48QALc6IUfj/O+gLAWAf8qHk+8V eLn9E1NrZXUtNMNYItBcgZfuMImIj7MC5qRo/BhzYdd0VyUzFYEyd9liUVFBDEXA SH65jyjRrXORKfLrSP5H8lcCdckTFXfxzonVFN2n4l7Gdv540UFuqloU+vS4Wrfp wMg9UvKRxr+7LwOI4q2sMFtB8Uki+lySY5UECqRIKUIJKIH6RPo3m73Kps7kw8kU c2RCU8w/9PoomPaEjvwZ0vT5lNrQXmBbC5hxcMzBHtLS0Cwb3xJsUB4w6niezdGY e+n6Vx7XeId7+Ujnn4praxUwyVq2wEirJccvAEgKFcZzjmGAXrHl8rOgMLvb3ugN P+ftkYk+Vizci9hmACeA1LGw4hN/dXMfephnezCsy9Q/QK8QPJV8XO0vxfyaQYhZ ie6SKcdZimFDzqd6oHLFftRou3imvq8RUvKTx2CR0KVkApnaDDiTeP5ay1Yd+UU3 EomWe7/mxoSgJ9kB/9GlKifQXBof62/fbrWH0AdM1oliONbbOZcLqg5x4DZUmfTK hTAx3SSxMRZSlc4Zl1CzbrHnFKi9cRBYCs0tPdOSnAO2ZfCsOmokJE+ig5I8lZre SlaciUpG2Vvf7m61mVlrqLLos8T9rTVM2pqwsoxII7A+dFrWK3HpqoypEN/87tm7 4/zjPF6LK2eTKL9WdTCk =6JC2 -----END PGP SIGNATURE----- Merge tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update the cpuidle poll state definition to reduce excessive energy usage related to it, add new CPU ID to the RAPL power capping driver, update the ACPI system suspend code to handle some special cases better, extend the PM core's device links code slightly, add new sysfs attribute for better suspend-to-idle diagnostics and easier hibernation handling, update power management tools and clean up cpufreq quite a bit. Specifics: - Modify the cpuidle poll state implementation to prevent CPUs from staying in the loop in there for excessive times (Rafael Wysocki). - Add Intel Cannon Lake chips support to the RAPL power capping driver (Joe Konno). - Add reference counting to the device links handling code in the PM core (Lukas Wunner). - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system suspend code (Rafael Wysocki). - Allow devices to be put into deeper low-power states via ACPI if both _SxD and _SxW are missing (Daniel Drake). - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a keyboard wakeup issue on Asus UX331UA (Chris Chiu). - Prevent the PCMCIA library code from aborting suspend-to-idle due to noirq suspend failures resulting from incorrect assumptions (Rafael Wysocki). - Add coupled cpuidle supprt to the Exynos3250 platform (Marek Szyprowski). - Add new sysfs file to make it easier to specify the image storage location during hibernation (Mario Limonciello). - Add sysfs files for collecting suspend-to-idle usage and time statistics for CPU idle states (Rafael Wysocki). - Update the pm-graph utilities (Todd Brandt). - Reduce the kernel log noise related to reporting Low-power Idle constraings by the ACPI system suspend code (Rafael Wysocki). - Make it easier to distinguish dedicated wakeup IRQs in the /proc/interrupts output (Tony Lindgren). - Add the frequency table validation in cpufreq to the core and drop it from a number of cpufreq drivers (Viresh Kumar). - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT bindings (Viresh Kumar). - Clean up the CPU online error code path in the cpufreq core (Viresh Kumar). - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186 cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh Kumar). - Drop memory allocation error messages from a few places in cpufreq and cpuildle drivers (Markus Elfring)" * tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits) ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA cpufreq: CPPC: Use transition_delay_us depending transition_latency PM / hibernate: Change message when writing to /sys/power/resume PM / hibernate: Make passing hibernate offsets more friendly cpuidle: poll_state: Avoid invoking local_clock() too often PM: cpuidle/suspend: Add s2idle usage and time state attributes cpuidle: Enable coupled cpuidle support on Exynos3250 platform cpuidle: poll_state: Add time limit to poll_idle() cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice ... |
||
|
f5a8eb632b |
arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s 3iIVHovno/JuJnTOE8LY =fQ8z -----END PGP SIGNATURE----- Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ... |
||
|
c9297d2841 |
This tag contains the core nds32 Linux port(including interrupt controller
driver and timer driver), which has been through 7 rounds of review on mailing list. It is able to boot to shell and passes most LTP-2017 testsuites in nds32 AE3XX platform. Total Tests: 1901 Total Skipped Tests: 618 Total Failures: 78 Copied below is the ChangeLog that contains the history of this patch set: Changes in v7: - Update cpu binding document to add "andestech,nds32v3" as fallback - Remove unnecessary configs of arch/nds32/Kconfig - Use GENERIC_CALIBRATE_DELAY - Add more help texts for minimum CPU type config - Update defconfig because of Kconfig changed and bug fixed - Move early_trap_init() declaration to nds32.h - Refine dma.c - Remove apply_relocate() in module.c and include <linux/moduleloader.h> to catch it - Add do_kernel_restart() in machine_restart() - Clean up setup.c to remove CONFIG_VGA_CONSOLE and some extern declaration functions - Add negative dependency for VGA_CONSOLE on nds32 - Refine ptrace.c and arch/nds32/include/asm/ptrace.h - Refine syscall restart flow and arch/nds32/kernel/signal.c - Fix a bug in VDSO - Remove the handling for kernel code unaligned accessing - Add a description for unaligned access handling in git commit message. - Rebase to v4.16-rc1 - Replace ACCESS_ONCE with READ_ONCE - Replace atomic_long_dec(&mm->nr_ptes) with mm_dec_nr_ptes(mm) - Remove print_symbol(%s) with printk(%pS) - Add bpf_perf_event.h - Remove init_stack and init_thread_info Changes in v6: - Refine naming for atl2c - Refine ae3xx.dts - Remove CONFIG_TIMER_ATCPIT100 in defconfig - Refine elf.h - Fix a vdso bug - Separate arch patchset and timer patchset - To select TIMER_OF in drivers/clocksource/Kconfig instead of arch/nds32/Kconfig Changes in v5: - Remove __NR__llseek and sys_mmap() - Add a comment to explain that we don't have clocksource cycle counter in the CPU - Add volatile in iounmap() - Fix typo Featuretures to Features - Replace CPU_CACHE_NONALIASING with !CPU_CACHE_ALIASING - Fix a endian bug when we try to get val = of_get_property(cpu,"clock-frequency", NULL) - Add screen_info to fix the building error when CONFIG_ VGA_CONSOLE is enabled - Remove unnecessary msync() - Add depends on !64BIT || BROKEN for faraday Kconfig because the descriptor only supports 32bit - Add atl2c binding document - Remove unnecessary include headers - Fix a vector table bug. It placed wrong vector handlers for 2 exceptions. - Fix a vdso bug. It may encounter TLB multi-hit exception because we accidently set it as a global page. - Add proper isb and barrier after some cache operations - Fix a bug in system call restart flow. $r0 ~ $r5 does not be recovered before restarting system call - Fix the build errors for OpenRISC and SPARC because io.h changed. - Update ae3xx.dts to support atl2c. Changes in v4: - Add atcpit100 timer driver due to it include vdso implementations and sent them together with nds32 may help reviewer to review. - Update ae3xx.dts for atcpit100 clock setting and remove vdso settings. - To get cycle counter register by timer driver instead of dts. - Use "depends on NDS32 || COMPILE_TEST" in atcpit100 driver because it is needed for nds32 vdso - Update defconfig becasue kconfig rename from CONFIG_CLKSRC_ATCPIT100 to CONFIG_TIMER_ATCPIT100 - Remove ag101p.dts because we are not yet ready for ag101p platform. - Update copyright style to SPDX-License-Identifier - Include <linux/uaccess.h> instead of <asm/uaccess.h> - Add local_irq_save()/local_irq_restore() to protect SR_TLB_VPN in update_mmu_cache(). - Update cpu_dcache_inval_all implementation to make sure all level cache are writeback. Changes in v3: - Use arch's io.h instead of generic one - Add andestech-boards binding document - Update nds32/cpus.txt binding document - Remove atcpit100 timer drivers - Select NO_BOOTMEM and delete HAVE_MEMBLOCK_NODE_MAP - make CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN are dependent - Add cpu type to select HWZOL/CPU_CACHE_ALIASING - Change CPU_CACHE_NONALIASING to CPU_CACHE_ALIASING - Remove bootarg from device tree script - Update ag101p.dts and ae3xx.dts for correct board name. - Clear and simplify defconfig - Implement L2C_R_REG/ L2C_W_REG with readl/writel instead of __raw_readl/__raw_writel for endian save - Remove early_init_dt_add_memory_arch/early_init_dt_alloc_memory_arch to use the generic ones - Refine devicetree.c - Fix bug https://lkml.kernel.org/r/1499782590-31366-1-git-send-ema... - Refine irqchip/irq-ativic32.c implementations - Add COMPILE_TEST in drivers/net/ethernet/faraday/Kconfig - Refine cache operations - Add CONFIG_HW_SUPPORT_UNALIGNMENT_ACCESS - Fix ZERO_PAGE define - Remove SA_RESTORER - Remove uapi/asm/signal.h - Redefine user_pt_regs - Remove spinlock.h - Remove __ARCH_WANT_RENAMEAT and __ARCH_WANT_SYSCALL_OFF_T from unistd.h - Remove set_fs(USER_DS) because flush_old_exec() will do this setting - Replace in_atomic() with faulthandler_disabled() - Add barrier.h - Select COMMON_CLK - Add clk_pll in dts - Add of_clk_init() in arch/nds32/kernel/time.c Changes in v2: - Set GENERIC_CALIBRATE_DELAY default n - Add earlycon support - Remove earlyprintk - Add CPU_BIG_ENDIAN, CPU_LITTLE_ENDIAN support - Refine unalignment access exception handler - Add VMSPLIT support - Use only one defconfig - Change interrupt-cells from 2 to 1 - Refine andestech cpu names in bindings/nds32/cpus.txt - Get clock frequency in dts because fpga bitmap doesn't include this feature - Update MAINTAINERS for bindings - Remove unused configs in Kconfig - Refine device tree scripts - Refine coding style - Use generic ioremap_nocache - Remove L2CC_PA_BASE define and its codes in head.S. It will be moved to bootloader. - Set PHYS_OFFSET to 0x0 instead of CONFIG_MEMORY_START - Remove unused macros - Simplify cpu_cache_* API - Change __asm__ __volatile__ to asm volatile - Refine uaccess.h - Remove unused/deprecated syscall - Use generic posix_types.h - Remove arch_trace_hardirqs_on/arch_trace_hardirqs_off - Fix bug of restart syscall - Refine syscall implementations - Use IS_ENABLED to replace ifdef as possible - Remove device_initcall(nds32_device_probe) - Refine vdso implementations - Refine copy_from_user()/copy_to_user()/clear_user()/get_user()/memmove()/memcpy() - Refine ioremap.c - Refine irq-ativic32.c - Fix a bug of earlycon.c - Export ioremap_nocache/ioremap_uc/ioremap_wc/ioremap_wt - Add atcpit100 driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (GNU/Linux) iQIcBAABAgAGBQJawZ28AAoJEHfB0l0b2JxExKYQAJ7btaPeIplIndrphlTQkfzW d1AhVBhwAlvqsOcFf+kwVIqOnfcLCtzVvgc63qc6mAroDZKcd+uuqOtkC801b33i jxcfSX802PciT3VhE8xz9OWFY9D3in/UCBhGe2OvY/cD/eC34gZhUqJhML/ioR5q DNPvua6lgYIN9VrFds19MjRzl7RwDBqNccQoFTXWc9Hl1Vs0YdKdbkOz0IWNtoLQ crP0v/UuHMC++WdU+MvDIEFqNVuXikg/NA+odPIbp3eF3xcmQBM0blWAi37eOKFo rzTw7TKtL8xObjvhyzx3aYFKPpLBfuYwk8onoZlthlqcwFClZy4lzdDdDxJhKiJ6 5hilzCSqEWXB9osQsrWgAuK1rNRvroChIp6/rcdGAq33mTPLVydx7hSKELhE7wuN UUaiJSSNRG1ZrR8tkccQpaRBjJ/gfXWGC3ys723oWz8A4bDzMkvZVzdOGOEZ+CsI w4HKNHLeY50wztV6dDSiVPhvUXQjBH9qd2zVHlutbfulPI/XNkGRfWpEGVT1zD4y pO3aHVJfsv+8aeyVBcXyN74O34a9HYa7811v7V5RI+uftdPhkzOwxuMQVMMJPe3s 4u4NglP7fekeWyDGCXFKOGoVOuCAUPHuzBUCFjL/cStHjrkBGVQvL1I925sJNabu IatFh62x8Ez4m2hIf5fg =J/YF -----END PGP SIGNATURE----- Merge tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 architecture support from Greentime Hu: "This contains the core nds32 Linux port (including interrupt controller driver and timer driver), which has been through seven rounds of review on mailing list. It is able to boot to shell and passes most LTP-2017 testsuites in nds32 AE3XX platform: Total Tests: 1901 Total Skipped Tests: 618 Total Failures: 78" Reviewed-by: Arnd Bergmann <arnd@arndb.de> * tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: (44 commits) nds32: To use the generic dump_stack() nds32: fix building failed if using elf toolchain. nios2: add ioremap_nocache declaration before include asm-generic/io.h. nds32: fix building failed if using older version gcc. dt-bindings: timer: Add andestech atcpit100 timer binding doc clocksource/drivers/atcpit100: VDSO support clocksource/drivers/atcpit100: Add andestech atcpit100 timer net: faraday add nds32 support. irqchip: Andestech Internal Vector Interrupt Controller driver dt-bindings: interrupt-controller: Andestech Internal Vector Interrupt Controller dt-bindings: nds32 SoC Bindings dt-bindings: nds32 L2 cache controller Bindings dt-bindings: nds32 CPU Bindings MAINTAINERS: Add nds32 nds32: Build infrastructure nds32: defconfig nds32: Miscellaneous header files nds32: Device tree support nds32: Generic timers support nds32: Loadable modules ... |
||
|
cea061e455 |
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - Add "Jailhouse" hypervisor support (Jan Kiszka) - Update DeviceTree support (Ivan Gorinov) - Improve DMI date handling (Andy Shevchenko)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/PCI: Fix a potential regression when using dmi_get_bios_year() firmware/dmi_scan: Uninline dmi_get_bios_year() helper x86/devicetree: Use CPU description from Device Tree of/Documentation: Specify local APIC ID in "reg" MAINTAINERS: Add entry for Jailhouse x86/jailhouse: Allow to use PCI_MMCONFIG without ACPI x86: Consolidate PCI_MMCONFIG configs x86: Align x86_64 PCI_MMCONFIG with 32-bit variant x86/jailhouse: Enable PCI mmconfig access in inmates PCI: Scan all functions when running over Jailhouse jailhouse: Provide detection for non-x86 systems x86/devicetree: Fix device IRQ settings in DT x86/devicetree: Initialize device tree before using it pci: Simplify code by using the new dmi_get_bios_year() helper ACPI/sleep: Simplify code by using the new dmi_get_bios_year() helper x86/pci: Simplify code by using the new dmi_get_bios_year() helper dmi: Introduce the dmi_get_bios_year() helper function x86/platform/quark: Re-use DEFINE_SHOW_ATTRIBUTE() macro x86/platform/atom: Re-use DEFINE_SHOW_ATTRIBUTE() macro |
||
|
0930437e8f
|
Merge remote-tracking branches 'spi/topic/sh-msiof', 'spi/topic/sprd' and 'spi/topic/tegra20-slink' into spi-next | ||
|
70a3550b8c
|
Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm-qspi', 'spi/topic/bcm2835aux', 'spi/topic/dw' and 'spi/topic/gpio' into spi-next | ||
|
a9f36db7ec |
Merge branch 'pm-cpufreq'
* pm-cpufreq: (38 commits) cpufreq: CPPC: Use transition_delay_us depending transition_latency cpufreq: tegra186: Don't validate the frequency table twice cpufreq: speedstep: Don't validate the frequency table twice cpufreq: sparc: Don't validate the frequency table twice cpufreq: sh: Don't validate the frequency table twice cpufreq: sfi: Don't validate the frequency table twice cpufreq: scpi: Don't validate the frequency table twice cpufreq: sc520: Don't validate the frequency table twice cpufreq: s3c24xx: Don't validate the frequency table twice cpufreq: qoirq: Don't validate the frequency table twice cpufreq: pxa: Don't validate the frequency table twice cpufreq: ppc_cbe: Don't validate the frequency table twice cpufreq: powernow: Don't validate the frequency table twice cpufreq: p4-clockmod: Don't validate the frequency table twice cpufreq: mediatek: Don't validate the frequency table twice cpufreq: longhaul: Don't validate the frequency table twice cpufreq: ia64-acpi: Don't validate the frequency table twice cpufreq: elanfreq: Don't validate the frequency table twice cpufreq: e_powersaver: Don't validate the frequency table twice cpufreq: cpufreq-dt: Don't validate the frequency table twice ... |
||
|
c0b458a946 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
a5af1fb94f |
dt-bindings: net: meson-dwmac: add support for the Meson8m2 SoC
The Meson8m2 SoC uses a similar (potentially even identical) register layout for the dwmac glue as Meson8b and GXBB. Unfortunately there is no documentation available. Testing shows that both, RMII and RGMII PHYs are working if they are configured as on Meson8b. Add a new compatible string to the documentation so differences (if there are any) between Meson8m2 and the other SoCs can be taken care of within the driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
9b85756341 |
dt-bindings: net: renesas-ravb: Add support for r8a77470 SoC
Add a new compatible string for the RZ/G1C (R8A77470) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
9217e566bd |
of_net: Implement of_get_nvmem_mac_address helper
It's common practice to store MAC addresses for network interfaces into nvmem devices. However the code to actually do this in the kernel lacks, so this patch adds of_get_nvmem_mac_address() for drivers to obtain the address from an nvmem cell provider. This is particulary useful on devices where the ethernet interface cannot be configured by the bootloader, for example because it's in an FPGA. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
75530a78de |
dt-bindings: net: Add bindings for National Instruments XGE netdev
This adds bindings for the NI XGE 1G/10G network device. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
a0306db6e5 |
Merge 4.16-rc7 into staging-next
We want the IIO and staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
b24d0d5b12 |
Merge 4.16-rc7 into char-misc-next
We want the hyperv fix in here for merging and testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
2b4f44eec2 |
Linux 4.16-rc7
-----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8 MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY= =YKUG -----END PGP SIGNATURE----- Backmerge tag 'v4.16-rc7' into drm-next Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though. |
||
|
36fd679f45
|
Merge remote-tracking branches 'regulator/topic/88pg86x', 'regulator/topic/dt', 'regulator/topic/formatting' and 'regulator/topic/gpio' into regulator-next | ||
|
9a13ce38eb
|
Merge remote-tracking branch 'regulator/topic/qcom' into regulator-next | ||
|
7bb5e54515
|
spi: sh-msiof: Document R-Car M3-N support
Document support for the MSIOF module in the Renesas M3-N (r8a77965) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
3cdb741efa
|
regulator: qcom: smd: Add pm8998 and pmi8998 regulators
Add the pm8998 and pmi8998 regulators as used in the MSM8998 platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
c8a8309049 |
pinctrl: sunxi: add support for the Allwinner H6 main pin controller
The Allwinner H6 SoC has two pin controllers, one main controller (called CPUX-PORT in user manual) and one controller in CPUs power domain (called CPUS-PORT in user manual). This commit introduces support for the main pin controller on H6. The pin bank A and B are not wired out and hidden from the SoC's documents, however it's shown that the "ATE" (an AC200 chip co-packaged with the H6 die) is connected to the main SoC die via these pin banks. The information about these banks is just copied from the BSP pinctrl driver, but re-formatted to fit the mainline pinctrl driver format. The GPIO functions are dropped, as they're impossible to use -- except a GPIO&IRQ only pin (PB20) which might be the IRQ of ATE. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
8396764154 |
dt-bindings: net: ave: add PXs3 support
Add a compatible string for ethernet controller on UniPhier PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
f0f56716fc |
ata: ahci-platform: add reset control support
Add support to get and control a list of resets for the device as optional and shared. These resets must be kept de-asserted until the device is enabled. This is specified as shared because some SoCs like UniPhier series have common reset controls with all ahci controller instances. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
|
aa4afa2cdd |
serial: remove cris/etrax uart drivers
The cris architecture is getting removed, so we don't need the uart driver any more. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
9a95e8d25a |
gpio: remove etraxfs driver
The cris architecture is getting removed, so we no longer need the etraxfs driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
7f2e858408 |
of/Documentation: Specify local APIC ID in "reg"
Use the "reg" property to specify the processor's local APIC ID instead of setting it to the CPU node index in Device Tree. Local APIC ID is assigned by hardware and visible in the APIC ID register. Some processor models allow APIC ID to be changed by software, but CPUID instruction executed with %eax = 0x0b always returns the initial ID in %edx. Local APIC ID does not match the node index in many systems. Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Link: https://lkml.kernel.org/r/4b1a471a56ac0ebd7510f4759afce9104595d6da.1521753738.git.ivan.gorinov@intel.com |
||
|
935c200aa7 |
Staging/IIO fixes for 4.16-rc7
Here are a few small Staging and IIO fixes for various reported issues. All of them are tiny, the majority being iio driver fixes for small issues, and one staging driver fix for a memory corruption issue. All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWrUALw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymorwCffuZhZWs6fVk4W9L1NAOqGmNOLmwAn3cQb9XE FQM0o0L0QvERfvFSpdDd =tU/Q -----END PGP SIGNATURE----- Merge tag 'staging-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are a few small staging and IIO fixes for various reported issues. All of them are tiny, the majority being iio driver fixes for small issues, and one staging driver fix for a memory corruption issue. All have been in linux-next with no reported issues" * tag 'staging-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ncpfs: memory corruption in ncp_read_kernel() iio: st_pressure: st_accel: pass correct platform data to init Revert "iio: accel: st_accel: remove redundant pointer pdata" iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock() dt-bindings: iio: adc: sd-modulator: fix io-channel-cells iio: adc: stm32-dfsdm: fix multiple channel initialization iio: adc: stm32-dfsdm: fix clock source selection iio: adc: stm32-dfsdm: fix call to stop channel iio: adc: stm32-dfsdm: fix compatible data use iio: chemical: ccs811: Corrected firmware boot/application mode transition |
||
|
2805894c1e |
dt-bindings: rng: add bindings doc for Keystone SA HWRNG driver
The Keystone SA module has a hardware random generator module. This commit adds binding doc for the KS2 SA HWRNG driver. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
1d17cbfbb5 |
crypto: inside-secure - fix clock resource by adding a register clock
On Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updated accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
03fe2debbb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit |
||
|
6d23ee9caa |
usb: changes for v4.17 merge window
Quite a lot happened in this cycle, with a total of 95 non-merge commits. The most interesting parts are listed below: Synopsys has been adding better support for USB 3.1 to dwc3. The same series also sets g_mass_storage's max speed to SSP. Roger Quadros (TI) added support for dual-role using the OTG block available in some dwc3 implementations, this makes sure that AM437x can swap roles in runtime. We have a new SoC supported in dwc3 now - Amlogic Meson GX - thanks to the work of Martin Blumenstingl. We also have a ton of changes in dwc2 (51% of all changes, in fact). The most interesting part there is the support for Hibernation (a Synopsys PM feature). Apart from these, we have our regular set of non-critical fixes all over the place. -----BEGIN PGP SIGNATURE----- iQJRBAABCgA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAlq03lYdHGZlbGlwZS5i YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQYfDg/+KAupmSBOJDXKIMD6 MZiIVLhSkBYFM5vwIs2+SwLl4H9wXmvoxqvcZaBH2qk5zWy0wdwnTLLCSDt/dCCy Rhrz//KFZStmPP1chJg8fU0yV4Wy4NIif3paTy4P2hEdPcn1XrDoekP+DhLKg6dz RbFRxEHnOhGvB4Wo2Rd/H1E6Pi6Vdd7iMCQdoDpatdrsIrplXZ8qnUOvIBY2Xi1K LEj7d+SAAEmwGm4QyzDzItR4wqKqhrcQ7Xlvi7pW/22AlJfMD82+Gr0JAnKCeshX 3+ksnAbDz3p5AXJm5I+T3c4Zyd3BPyZevc72jTFkf0ggwNjMOtUuxTQhCRQSRRwA +gofFEvJ/vrWQWZzVhvzZQmTrc8sP2vUaAoGpfIBMBEVqxP89BfMgvf3wU9/if37 WvICdpZ0o0pOGUkLduhyDIm0/SEBEIAqSY/uU1m5LsZzboR7B3Gm6IWsHhHSMZz8 Dd8aljQxR1fNnHoqUlc2yu1IiI9PQCNJcY6Waah3CKMgp0EH1KbK00E34oxUQUwF Edl6jsOrkv4L4X8BonKuipezwl1TTXjiAK1fE3N8SkorcndIww35kVVLKqFrCQOf 5VBuGYTgGNCubb2wk8wx/TSBXsM/zpQ6y0uPKg/1icpMmXqFrrv2emyTKa2YS7y8 KPqBQmz6Cj9g8Sn4OcffWACMiHU= =F6OC -----END PGP SIGNATURE----- Merge tag 'usb-for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: changes for v4.17 merge window Quite a lot happened in this cycle, with a total of 95 non-merge commits. The most interesting parts are listed below: Synopsys has been adding better support for USB 3.1 to dwc3. The same series also sets g_mass_storage's max speed to SSP. Roger Quadros (TI) added support for dual-role using the OTG block available in some dwc3 implementations, this makes sure that AM437x can swap roles in runtime. We have a new SoC supported in dwc3 now - Amlogic Meson GX - thanks to the work of Martin Blumenstingl. We also have a ton of changes in dwc2 (51% of all changes, in fact). The most interesting part there is the support for Hibernation (a Synopsys PM feature). Apart from these, we have our regular set of non-critical fixes all over the place. |
||
|
72fd9bc8f5 |
dt-bindings: imx: update pinctrl doc for imx6sll
Add pinctrl binding doc update for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
76a16885a7 |
pinctrl: sh-pfc: Updates for v4.17 (take two)
- Add USB pin groups on R-Car M3-N, - Add support for the new R-Car V3H SoC, - Add EtherAVB pin groups on R-Car V3M, - Miscellaneous fixes and cleanups. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJas+IJAAoJEEgEtLw/Ve77034P/037wFBewWZSj1+/5cGMQ9Cm NJtWyPMXlmTW7pzT59Q6rErePnC21oCp33tYAeC3+Pja3IbCj2UDHStravEFRlXb 0n7caWWudHl4aPmDWhtzfDs6+NSUWaFCrz8kbwQVHrYU1RhAMtP2vZVFV0af/5EB paQkUItYDYGG5Rjc9Sz/L3PegvAbJ8Wt+61jETLU4DMTa1ZGDWXL7YC8DTAkULGM xCCNoj5x3UJfbY6MhqmPG5EOmjEOUvi8cQcW/Ch2JQkojNf1U1WnsRUL5DNkBHiE Zrttn8+y02ssIpjYdpmw/KU/tpMGdtoRnhGrBfeeb9HDOqw3q8Lb7XDR7/wVxdKD nvbb8urWj3UiHCVlAebqu3vAuhFPR2wq3LXMv5/7/BJRjAjhQRtkLiEJl41WGQlZ BIITfcQ7Yv2EZ+6fahmZHQ2BcEoTBfOg8Y6yEjmRHXV6gO27IIx0cjp8xKbLjGWz a3zyT+LYSNJhO47QpgOCwHbuXiiExAoRiUChLDhrgd75s6qFQ5kX0gtWyTGUNgam Q60zD1Vx2+LXD0B4K1gYkrMqLZy081sxinRC7I7B0xKPU/gXz8yvGhZW8cQpunRd VOb9rkYu5ec51/7oRuwb4aoHtV5IGDxri5T/8R/0zpwVZwJJ4YWS0OJuYufVS3hX 6bWdE9+32/c8CVfHt5zX =swQl -----END PGP SIGNATURE----- Merge tag 'sh-pfc-for-v4.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.17 (take two) - Add USB pin groups on R-Car M3-N, - Add support for the new R-Car V3H SoC, - Add EtherAVB pin groups on R-Car V3M, - Miscellaneous fixes and cleanups. |
||
|
9ec7ccc8f4 |
core, i915, amdgpu, imx, sun4i, ast, tegra, vmwgfx fixes.
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJatEGeAAoJEAx081l5xIa+I48P/1hikZ9+JzL3paYkknLVsBCg TkVxOLFDk+1vd4MtmEhiDgwR1VxETgQJv/Y6wRqBALGu/kYcyRq5S1j6B65ZLFMx sKVSmp2quGE2myJeFVQj3mi2N2duVbaNk1hbZDXDh/tvvlAfnpX2XkjR2gtKGjOM LfY4AFYggoBeMEFWBk287b/O/qk1BvVNZxyxnvpsm6HboCwOB6QFt5Du8MFafxbp lqqfXEHFVUQ8ukqphoYcrRzr3d6AGtR6HBHDC8ooVIe2QAyZftsWaxHgbyZnBExG obH/e9ssrIQBQsOky2VVxS1QesWarUwV+m3j/u4N2OvNZ7uSTKt4meHHdpihujLf H8xErUbkMMGYCgatqHCSCAFz8TNRDWutecMxSoAmpsF+6rKr4T+oKvbHiubN6rPa s4m1BA2SjSmeowNcUNeTfcKeyRFKYrCepRtlTCibLB+1Nco5oArVEXEMqti3VMvk cJW1qLpdQVyQHk7EA5lZHB5iFtPsxhOpyzjIWScdyFjTx0JcmnVxraUbnqFU8J5X aNhBz6tbfxTn1r2bTZgkW+zKpVJd6LCWleUNsKHTNcyHffz2ny4kiK8TdcUJBTkC sK26IPIY8X5lM1p3/Lytrki7+Ul+ChfyDaUcXC3VEqseznaRxzzlDhKpLohOmuAt z5VQUFYxZR6EYQ6oOo1W =4caQ -----END PGP SIGNATURE----- Merge tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of fixes all over the place (core, i915, amdgpu, imx, sun4i, ast, tegra, vmwgfx), nothing too serious or worrying at this stage. - one uapi fix to stop multi-planar images with getfb - Sun4i error path and clock fixes - udl driver mmap offset fix - i915 DP MST and GPU reset fixes - vmwgfx mutex and black screen fixes - imx array underflow fix and vblank fix - amdgpu: display fixes - exynos devicetree fix - ast mode fix" * tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux: (29 commits) drm/ast: Fixed 1280x800 Display Issue drm: udl: Properly check framebuffer mmap offsets drm/i915: Specify which engines to reset following semaphore/event lockups drm/vmwgfx: Fix a destoy-while-held mutex problem. drm/vmwgfx: Fix black screen and device errors when running without fbdev drm: Reject getfb for multi-plane framebuffers drm/amd/display: Add one to EDID's audio channel count when passing to DC drm/amd/display: We shouldn't set format_default on plane as atomic driver drm/amd/display: Fix FMT truncation programming drm/amd/display: Allow truncation to 10 bits drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()' drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()' drm/i915/dp: Write to SET_POWER dpcd to enable MST hub. drm/amd/display: fix dereferencing possible ERR_PTR() drm/amd/display: Refine disable VGA drm/tegra: Shutdown on driver unbind drm/tegra: dsi: Don't disable regulator on ->exit() drm/tegra: dc: Detach IOMMU group from domain only once dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node drm/imx: move arming of the vblank event to atomic_flush ... |
||
|
c4f4d2f917 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ... |
||
|
f3924ae723 |
Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
Changes this time mostly come down to: - hook up the DRM GPU scheduler - prep work for GC7000L support, to be completed in the next cycle * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (22 commits) drm/etnaviv: bump HW job limit to 4 drm/etnaviv: etnaviv_sched: Staticize functions when possible drm/etnaviv: add PTA handling to MMUv2 drm/etnaviv: add function to load the initial PTA state drm/etnaviv: handle security states drm/etnaviv: add security handling mode enum drm/etnaviv: add hardware database drm/etnaviv: add more minor features fields drm/etnaviv: update hardware headers from rnndb drm/etnaviv: add support for slave interface clock drm/etnaviv: split out and optimize MMU fault dumping drm/etnaviv: remove the need for a gpu-subsystem DT node dt-bindings: etnaviv: add slave interface clock drm/etnaviv: use correct format specifier for size_t drm/etnaviv: replace hangcheck with scheduler timeout drm/etnaviv: lock BOs after all other submit work is done drm/etnaviv: move dependency handling to scheduler drm/etnaviv: hook up DRM GPU scheduler drm/etnaviv: track fences by IDR instead of seqno drm/etnaviv: add missing major features field to debugfs ... |