Commit Graph

144 Commits

Author SHA1 Message Date
Russell King
026d02a236 [PATCH] Serial: Split 8250 port table (part 2)
Remove legacy ISA serial ports for Accent, Boca, Fourport, Hub6 and MCA
from the architecture specific serial.h include.

The only ports which remain in asm-*/serial.h are the platform specific
entries.  These should really be converted by platform maintainers to
use a platform device, such as can be found in
arch/arm/mach-footbridge/isa.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29 18:45:19 +01:00
Greg KH
8644d2a42b Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-06-27 22:07:56 -07:00
Andrew Morton
bb4a61b6ea [PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n
With CONFIG_PCI=n:

In file included from include/linux/pci.h:917,
                 from lib/iomap.c:6:
include/asm/pci.h:104: warning: `enum pci_dma_burst_strategy' declared inside parameter list
include/asm/pci.h:104: warning: its scope is only this definition or declaration, which is probably not what you want.
include/asm/pci.h: In function `pci_dma_burst_advice':
include/asm/pci.h:106: dereferencing pointer to incomplete type
include/asm/pci.h:106: `PCI_DMA_BURST_INFINITY' undeclared (first use in this function)
include/asm/pci.h:106: (Each undeclared identifier is reported only once
include/asm/pci.h:106: for each function it appears in.)
make[1]: *** [lib/iomap.o] Error 1

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:46 -07:00
David S. Miller
e24c2d963a [PATCH] PCI: DMA bursting advice
After seeing, at best, "guesses" as to the following kind
of information in several drivers, I decided that we really
need a way for platforms to specifically give advice in this
area for what works best with their PCI controller implementation.

Basically, this new interface gives DMA bursting advice on
PCI.  There are three forms of the advice:

1) Burst as much as possible, it is not necessary to end bursts
   on some particular boundary for best performance.

2) Burst on some byte count multiple.  A DMA burst to some multiple of
   number of bytes may be done, but it is important to end the burst
   on an exact multiple for best performance.

   The best example of this I am aware of are the PPC64 PCI
   controllers, where if you end a burst mid-cacheline then
   chip has to refetch the data and the IOMMU translations
   which hurts performance a lot.

3) Burst on a single byte count multiple.  Bursts shall end
   exactly on the next multiple boundary for best performance.

   Sparc64 and Alpha's PCI controllers operate this way.  They
   disconnect any device which tries to burst across a cacheline
   boundary.

   Actually, newer sparc64 PCI controllers do not have this behavior.
   That is why the "pdev" is passed into the interface, so I can
   add code later to check which PCI controller the system is using
   and give advice accordingly.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:45 -07:00
Michael Ellerman
2311b1f2bb [PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patch
This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch
which is in 2.6.12-rc4-mm1.

It fixes the patch to work on PPC iSeries, removes some debug printks
at Ben's request, and incorporates your
fix-pci-mmap-on-ppc-and-ppc64-fix.patch also.

Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch was discussed at length on linux-pci and so far, the last
iteration of it didn't raise any comment.  It's effect is a nop on
architecture that don't define the new pci_resource_to_user() callback
anyway.  It allows architecture like ppc who put weird things inside of
PCI resource structures to convert to some different value for user
visible ones.  It also fixes mmap'ing of IO space on those archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:45 -07:00
Benjamin Herrenschmidt
e4ee69c8c1 [PATCH] ppc32: Bump PMU interrupt priority
The Power Management Unit on PowerMacs is very sensitive to timeouts during
async message exchanges.  It uses rather crude protocol based on a shift
register with an interrupt and is almost continuously exchanging messages with
the host CPU on laptops.

This patch adds a routine to the open_pic driver to be able to select a PMU
driver so that it bumps it's interrupt priority to above the normal level.

This will allow PMU interrupts to occur while another interrupt is pending,
and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to
a timeout in PMU communication caused by excessive interrupt latency.  The
problem is very rare, and usually just doesn't happen, but it is still useful
to make things even more robust.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:11:42 -07:00
Jens Axboe
22e2c507c3 [PATCH] Update cfq io scheduler to time sliced design
This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:33:29 -07:00
Eric W. Biederman
70765aa4bd [PATCH] kexec: kexec ppc support
I have tweaked this patch slightly to handle an empty list
of pages to relocate passed to relocate_new_kernel.  And
I have added ppc_md.machine_crash_shutdown.  To keep up with
the changes in the generic kexec infrastructure.

From: Albert Herranz <albert_herranz@yahoo.es>

The following patch adds support for kexec on the ppc32 platform.

Non-OpenFirmware based platforms are likely to work directly without
additional changes on the kernel side.  The kexec-tools userland package
may need to be slightly updated, though.

For OpenFirmware based machines, additional work is still needed on the
kernel side before kexec support is ready.  Benjamin Herrenschmidt is
kindly working on that part.

In order for a ppc platform to use the kexec kernel services it must
implement some ppc_md hooks.  Otherwise, kexec will be explicitly disabled,
as suggested by benh.

There are 3+1 new ppc_md hooks that a platform supporting kexec may
implement.  Two of them are mandatory for kexec to work.  See
include/asm-ppc/machdep.h for details.

- machine_kexec_prepare(image)

  This function is called to make any arrangements to the image before it
  is loaded.

  This hook _MUST_ be provided by a platform in order to activate kexec
  support for that platform.  Otherwise, the platform is considered to not
  support kexec and the kexec_load system call will fail (that makes all
  existing platforms by default non-kexec'able).

- machine_kexec_cleanup(image)

  This function is called to make any cleanups on image after the loaded
  image data it is freed.  This hook is optional.  A platform may or may
  not provide this hook.

- machine_kexec(image)

  This function is called to perform the _actual_ kexec.  This hook
  _MUST_ be provided by a platform in order to activate kexec support for
  that platform.

  If a platform provides machine_kexec_prepare but forgets to provide
  machine_kexec, a kexec will fall back to a reboot.

  A ready-to-use machine_kexec_simple() generic function is provided to,
  hopefully, simplify kexec adoption for embedded platforms.  A platform
  may call this function from its specific machine_kexec hook, like this:

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}

- machine_shutdown()

  This function is called to perform any machine specific shutdowns, not
  already done by drivers.  This hook is optional.  A platform may or may
  not provide this hook.

An example (trimmed) platform specific module for a platform supporting
kexec through the existing machine_kexec_simple follows:

/* ... */

#ifdef CONFIG_KEXEC
int myplatform_kexec_prepare(struct kimage *image)
{
        /* here, we can place additional preparations
*/
        return 0; /* yes, we support kexec */
}

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}
#endif /* CONFIG_KEXEC */

/* ... */

void __init
platform_init(unsigned long r3, unsigned long r4,
unsigned long r5,
              unsigned long r6, unsigned long r7)
{

/* ... */

#ifdef CONFIG_KEXEC
        ppc_md.machine_kexec_prepare =
myplatform_kexec_prepare;
        ppc_md.machine_kexec         =
myplatform_kexec;
#endif /* CONFIG_KEXEC */

/* ... */

}

The kexec ppc kernel support has been heavily tested on the GameCube Linux
port, and, as reported in the fastboot mailing list, it has been tested too
on a Moto 82xx ppc by Rick Richardson.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
Kumar Gala
3d9077afea [PATCH] ppc32: Remove FSL OCP support
Support for the OCP device model on Freescale (FSL) PPC's is no longer used.
All FSL PPC's that were using OCP have be converted to using the platform
device model.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:27 -07:00
Kumar Gala
33d9e9b56d [PATCH] ppc32: Add support for Freescale e200 (Book-E) core
The e200 core is a Book-E core (similar to e500) that has a unified L1 cache
and is not cache coherent on the bus.  The e200 core also adds a separate
exception level for debug exceptions.  Part of this patch helps to cleanup a
few cases that are true for all Freescale Book-E parts, not just e500.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:26 -07:00
Jesper Juhl
dcd497f99a [PATCH] streamline preempt_count type across archs
The preempt_count member of struct thread_info is currently either defined
as int, unsigned int or __s32 depending on arch.  This patch makes the type
of preempt_count an int on all archs.

Having preempt_count be an unsigned type prevents the catching of
preempt_count < 0 bugs, and using int on some archs and __s32 on others is
not exactely "neat" - much nicer when it's just int all over.

A previous version of this patch was already ACK'ed by Robert Love, and the
only change in this version of the patch compared to the one he ACK'ed is
that this one also makes sure the preempt_count member is consistently
commented.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:19 -07:00
Kumar Gala
5be061eee9 [PATCH] ppc32: Clean up NUM_TLBCAMS usage for Freescale Book-E PPC's
Made the number of TLB CAM entries private and converted the board
consumers to use num_tlbcam_entries which is setup at boot time from
configuration registers.  This way the only consumers of the #define
NUM_TLBCAMS are the arrays used to manage the TLB.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:24 -07:00
Kumar Gala
65145e060b [PATCH] ppc32: Added support for all MPC8548 internal interrupts
The MPC8548 has 48 internal interrupts and 12 external interrupts.  The
previous generation PowerQUICC III devices only had 32 internal and 12
external interrupts on the primary interrupt controller.

Expanded the number of internal interrupts to 48 for all PowerQUICC III
processors and moved the interrupt numbers for the external after the 48
internal interrupt lines, rather than putting the 12 new internal
interrupts at the end and ifdef'ng the whole mess.  As parted of this
created a macro which represents the internal interrupt senses since they
are the same on all PQ3 processors.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:24 -07:00
Kumar Gala
b264c35279 [PATCH] ppc32: Converted MPC10X bridge to use platform devices instead of OCP
Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to used
the standard platform device model.

Signed-off-by: Matt McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:23 -07:00
Kumar Gala
c91999bba3 [PATCH] ppc32: Added preliminary support for the MPC8548 CDS board
Adds support for using the MPC8548 processor on the CDS reference board.
Currently all the major busses (PCI, PCI-X, PCI-Express, sRIO) and eTSEC3
and eTSEC4 are not supported.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:23 -07:00
Kumar Gala
5b37b700f7 [PATCH] ppc32: Added support for new MPC8548 family of PowerQUICC III processors
Added descriptions of the new MPC8548 family processors, e500 core and
peripherals.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:23 -07:00
Ingo Molnar
39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Yani Ioannou
f2d03e1b3f [PATCH] Driver Core: include: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00
David Woodhouse
0107b3cf32 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-06-18 08:36:46 +01:00
Keir Fraser
07eee78ea8 [PATCH] AGP fix for Xen VMM
When Linux is running on the Xen virtual machine monitor, physical
addresses are virtualised and cannot be directly referenced by the AGP
GART.  This patch fixes the GART driver for Xen by adding a layer of
abstraction between physical addresses and 'GART addresses'.

Architecture-specific functions are also defined for allocating and freeing
the GATT.  Xen requires this to ensure that table really is contiguous from
the point of view of the GART.

These extra interface functions are defined as 'no-ops' for all existing
architectures that use the GART driver.

Signed-off-by: Keir Fraser <keir@xensource.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2005-06-07 12:35:43 -07:00
Tom Rini
74262de5d1 [PATCH] ppc32: add <linux/compiler.h> to <asm/sigcontext.h>
On ppc32, <asm/sigcontext.h> uses __user, but doesn't directly include
<linux/compiler.h>.  This adds that in.  Without this, glibc will not
compile.

Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-06 17:02:02 -07:00
David Woodhouse
1c3f45ab2f Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-06-02 16:39:11 +01:00
Vitaly Bordug
a6dbba77a9 [PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge
This patch adds on-chip PCI bridge support for the PQ2 family.  The
incomplete existent code is updated with interrupt handling stuff and
board-specific bits for 8272ADS and PQ2FADS; the related files were renamed
(from m8260_pci to m82xx_pci) to be of more generic fashion.  This is
tested with 8266ADS and 8272ADS, should work on PQ2FADS as well.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 16:46:15 -07:00
David Woodhouse
add6714120 Add missing asm-ppc/seccomp.h. Must learn to use git properly.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 11:36:21 +01:00
David Woodhouse
ea9c102cb0 Add CONFIG_AUDITSC and CONFIG_SECCOMP support for ppc32
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-08 15:56:09 +01:00
Al Viro
b1ecb4c3a9 [PATCH] asm/signal.h unification
New file - asm-generic/signal.h.  Contains declarations of
__sighandler_t, __sigrestore_t, SIG_DFL, SIG_IGN, SIG_ERR and default
definitions of SIG_BLOCK, SIG_UNBLOCK and SIG_SETMASK.

asm-*/signal.h switched to including it.  The only exception is
asm-parisc/signal.h that wants its own declaration of __sighandler_t;
that one is left as-is.

asm-ppc64/signal.h required one more thing - unlike everybody else it
used __sigrestorer_t instead of usual __sigrestore_t.  PPC64 switched to
common spelling.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-04 07:33:15 -07:00
Benjamin Herrenschmidt
e521dca64e [PATCH] ppc32: Fix might_sleep() warning with clock spreading
The clock spreading disable/enable code was called to late/early during
the suspend/resume code on some laptops and would trigger a
might_sleep() warning due to the down() call in the low level i2c code.

This fixes it by calling those functions earlier/later when interrupts
are still enabled.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-02 08:15:22 -07:00
Stas Sergeev
7f261b5f0d [PATCH] move SA_xxx defines to linux/signal.h
The attached patch moves the IRQ-related SA_xxx flags (namely, SA_PROBE,
SA_SAMPLE_RANDOM and SA_SHIRQ) from all the arch-specific headers to
linux/signal.h.  This looks like a left-over after the irq-handling code
was consolidated.  The code was moved to kernel/irq/*, but the flags are
still left per-arch.

Right now, adding a new IRQ flag to the arch-specific header, like this
patch does:
http://cvs.sourceforge.net/viewcvs.py/*checkout*/alsa/alsa-driver/utils/patches/pcsp-kernel-2.6.10-03.diff?rev=1.1
no longer works, it breaks the compilation for all other arches, unless you
add that flag to all the other arch-specific headers too.  So I think such
a clean-up makes sense.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:02 -07:00
Matt Mackall
c8538a7aa5 [PATCH] remove all kernel BUGs
This patch eliminates all kernel BUGs, trims about 35k off the typical
kernel, and makes the system slightly faster.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:01 -07:00
Paul Mackerras
443a848cd3 [PATCH] ppc32: refactor FPU exception handling
Moved common FPU exception handling code out of head.S so it can be used by
several of the sub-architectures that might of a full PowerPC FPU.

Also, uses new CONFIG_PPC_FPU define to fix alignment exception handling
for floating point load/store instructions to only occur if we have a
hardware FPU.

Signed-off-by: Jason McMullan <jason.mcmullan@timesys.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:40 -07:00
Al Viro
92a11f9e7c [PATCH] ppc iomem annotations: ->io_base_virt
* ->io_base_virt in struct pci_controller is iomem pointer.  Marked as such.
  Most of the places that used it are already annotated to expect iomem.
* places that did gratitious (and wrong) casts a-la
	isa_io_base = (unsigned long)ioremap(...);
	hose->io_base_virt = (void *)isa_io_base;
  turned into
	hose->io_base_virt = ioremap(...);
	isa_io_base = (unsigned long)hose->io_base_virt;
* pci_bus_io_base() annotated as returning iomem pointer.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-25 07:55:57 -07:00
Al Viro
9090e001f2 [PATCH] ppc user annotations: sigcontext
sigcontext.regs is a userland pointer

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-25 07:55:57 -07:00
Al Viro
e2178f199b [PATCH] ppc trivial iomem annotations: chrp
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-24 14:58:08 -07:00
Hugh Dickins
d455a3696c [PATCH] freepgt: arch FIRST_USER_ADDRESS 0
Replace misleading definition of FIRST_USER_PGD_NR 0 by definition of
FIRST_USER_ADDRESS 0 in all the MMU architectures beyond arm and arm26.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-19 13:29:23 -07:00
Pavel Machek
b1c42851b0 [PATCH] u32 vs. pm_message_t in ppc and radeon
This fixes pm_message_t vs.  u32 confusion in ppc and aty (I *hope* that's
basically radeon code...).  I was not able to test most of these, but I'm
not really changing anything, so it should be okay.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:34 -07:00
Benjamin Herrenschmidt
7bbd827750 [PATCH] ppc64: very basic desktop g5 sound support
This patch hacks the current PowerMac Alsa driver to add some basic support
of analog sound output to some desktop G5s.  It has severe limitations
though:

 - Only 44100Khz 16 bits
 - Only work on G5 models using a TAS3004 analog code, that is early
   single CPU desktops and all dual CPU desktops at this date, but none
   of the more recent ones like iMac G5.
 - It does analog only, no digital/SPDIF support at all, no native
   AC3 support

Better support would require a complete rewrite of the driver (which I am
working on, but don't hold your breath), to properly support the diversity
of apple sound HW setup, including dual codecs, several i2s busses, all the
new codecs used in the new machines, proper clock switching with digital,
etc etc etc...

This patch applies on top of the other PowerMac sound patches I posted in
the past couple of days (new powerbook support and sleep fixes).  

Note: This is a FAQ entry for PowerMac sound support with TI codecs: They
have a feature called "DRC" which is automatically enabled for the internal
speaker (at least when auto mute control is enabled) which will cause your
sound to fade out to nothing after half a second of playback if you don't
set a proper "DRC Range" in the mixer.  So if you have a problem like that,
check alsamixer and raise your DRC Range to something reasonable.

Note2: This patch will also add auto-mute of the speaker when line-out jack
is used on some earlier desktop G4s (and on the G5) in addition to the
headphone jack.  If that behaviour isn't what you want, just disable
auto-muting and use the manual mute controls in alsamixer.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:32 -07:00
Benoit Boissinot
cd2c169e6a [PATCH] ppc32: fix compilation error in include/asm/prom.h
make defconfig give the following error on ppc (gcc-4):

arch/ppc/syslib/prom_init.c:120: error: static declaration of ‘prom_display_paths’ follows non-static declaration
include/asm/prom.h:17: error: previous declaration of ‘prom_display_paths’ was here
arch/ppc/syslib/prom_init.c:122: error: static declaration of ‘prom_num_displays’ follows non-static declaration
include/asm/prom.h:18: error: previous declaration of ‘prom_num_displays’ was here

Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:28 -07:00
Kumar Gala
f50b153b19 [PATCH] ppc32: Support 36-bit physical addressing on e500
To add support for 36-bit physical addressing on e500 the following changes
have been made.  The changes are generalized to support any physical address
size larger than 32-bits:

* Allow FSL Book-E parts to use a 64-bit PTE, it is 44-bits of pfn, 20-bits
  of flags.

* Introduced new CPU feature (CPU_FTR_BIG_PHYS) to allow runtime handling of
  updating hardware register (SPRN_MAS7) which holds the upper 32-bits of
  physical address that will be written into the TLB.  This is useful since
  not all e500 cores support 36-bit physical addressing.

* Currently have a pass through implementation of fixup_bigphys_addr

* Moved _PAGE_DIRTY in the 64-bit PTE case to free room for three additional
  storage attributes that may exist in future FSL Book-E cores and updated
  fault handler to copy these bits into the hardware TLBs.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:22 -07:00
Kumar Gala
b464fce5ed [PATCH] ppc32: Allow adjust of pfn offset in pte
Allow the pfn to be offset by more than just PAGE_SHIFT in the pte.  Today,
PAGE_SHIFT tends to allow us to have 12-bits of flags in the pte.  In the
future if we have a larger pte we can allocate more bits for flags by
offsetting the pfn even further.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:21 -07:00
Kumar Gala
a85f6d4aca [PATCH] ppc32: make usage of CONFIG_PTE_64BIT & CONFIG_PHYS_64BIT consistent
CONFIG_PTE_64BIT & CONFIG_PHYS_64BIT are not currently consistently used in
the code base.  Fixed up the usage such that CONFIG_PTE_64BIT is used when we
have a 64-bit PTE regardless of physical address width.  CONFIG_PHYS_64BIT is
used if the physical address width is larger than 32-bits, regardless of PTE
size.

These changes required a few sub-arch specific ifdef's to be fixed and the
introduction of a physical address format string.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:21 -07:00
Kumar Gala
7a1e335085 [PATCH] ppc32: Fix pte_update for 64-bit PTEs
While the existing pte_update code handled atomically modifying a 64-bit PTE,
it did not return all 64-bits of the PTE before it was modified.  This causes
problems in some places that expect the full PTE to be returned, like
ptep_get_and_clear().

Created a new pte_update function that is conditional on CONFIG_PTE_64BIT.  It
atomically reads the low PTE word which all PTE flags are required to be in
and returns a premodified full 64-bit PTE.

Since we now have an explicit 64-bit PTE version of pte_update we can also
remove the hack that existed to get the low PTE word regardless of size.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:20 -07:00
Benjamin Herrenschmidt
0c541b4406 [PATCH] ppc32: Fix AGP and sleep again
My previous patch that added sleep support for uninorth-agp and some AGP
"off" stuff in radeonfb and aty128fb is breaking some configs.  More
specifically, it has problems with rage128 setups since the DRI code for
these in X doesn't properly re-enable AGP on wakeup or console switch
(unlike the radeon DRM).

This patch fixes the problem for pmac once for all by using a different
approach.  The AGP driver "registers" special suspend/resume callbacks with
some arch code that the fbdev's can later on call to suspend and resume
AGP, making sure it's resumed back in the same state it was when suspended.
 This is platform specific for now.  It would be too complicated to try to
do a generic implementation of this at this point due to all sort of weird
things going on with AGP on other architectures.  We'll re-work that whole
problem cleanly once we finally merge fbdev's and DRI.

In the meantime, please apply this patch which brings back some r128 based
laptops into working condition as far as system sleep is concerned.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:19 -07:00
Benjamin Herrenschmidt
7a648b9ec0 [PATCH] ppc32: Fix cpufreq problems
This patch updates the PowerMac cpufreq driver.  It depends on the addition
of the suspend() method (my previous patch) and on the new flag I defined
to silence some warnings that are normal for us.

It fixes various issues related to cpufreq on pmac, including some crashes
on some models when sleeping the machine while in low speed, proper voltage
control on some newer machines, and adds voltage control on 750FX based G3
laptops.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:18 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00