These is no LBPW on Renoir. So removing program of lbpw for renoir.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
debugfs_remove and kfree has taken the null check in account.
hence it is unnecessary to check it. Just remove the condition.
No functional change.
This issue was detected by using the Coccinelle software.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is fine for displays without audio functionality to not provide
any SAD block in their EDID. Do not log an error in that case,
just return quietly.
This fixes half of bug fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not try to allocate any amount of memory requested by the user.
Instead limit it to 128 registers. Actually the longest series of
consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and
mmGB_MACROTILE_MODE0-15 (0x2644-0x2673).
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273
Signed-off-by: Trek <trek00@inbox.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e01f2d4189.
VG20 did not require this workaround, as the fix is in the VBIOS.
Leave VG10/12 workaround as some older shipped cards do not have the
VBIOS fix in place, and the kernel workaround is required in those
situations
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Next step towards HMM support. For now just silence the retry fault and
optionally redirect the request to the dummy page.
v2: make sure the VM is not destroyed while we handle the fault.
v3: fix VM destroy check, cleanup comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free the pasid only while the root PD is reserved. This prevents use after
free in the page fault handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While handling a page fault we can't wait for other ongoing GPU
operations or we can potentially run into deadlocks.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For handling PD/PT clears directly in the fault handler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For handling PTE updates directly in the fault handler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For handling PDE updates directly in the fault handler.
v2: fix typo in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to update page tables directly while in a page fault.
v2: use direct/delayed entities and still wait for moves
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For page fault handling we need to use a direct update which can't be
blocked by ongoing user CS.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV case, the autoload sequence is the same
as bare metal, except VF won't load TOC.
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In SRIOV case, SMU and powerplay are handled in HV.
VF shouldn't have control over SMU and powerplay.
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma_v4 should be ungated when the IP resume back,
otherwise it will hang up and resume time out error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mailbox functions and interrupts are only for Navi12 VF.
Register functions and irqs during initialization.
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp v11 code missed ring stop in ring create function(VMR)
while psp v3.1 code had the code. This will cause VM destroy1
fail and psp ring create fail.
For SIOV-VF, ring_stop should not be deleted in ring_create
function.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set mp1 state properly for SW SMU suspend/reset routine.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawaii needs to flush caches explicitly, submitting an IB in a user
VMID from kernel mode. There is no s_fence in this case.
Fixes: eb3961a574 ("drm/amdgpu: remove fence context from the job")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
amdgpu_ras_reserve_bad_pages was moved to amdgpu_ras_reset_gpu
because writing to EEPROM during ASIC reset was unstable.
But for ERREVENT_ATHUB_INTERRUPT amdgpu_ras_reset_gpu is called
directly from ISR context and so locking is not allowed. Also it's
irrelevant for this partilcular interrupt as this is generic RAS
interrupt and not memory errors specific.
Fix:
Avoid calling amdgpu_ras_reserve_bad_pages if not in task context.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mimic the ones for Vega10, add mailbox backend for Navi1x
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Jiange Zhao <Jiange.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add and_mask since the programming logic of golden setting changed
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The table grows quickly during debug/development effort when
multiple RAS errors are injected. Allow to avoid this by setting
table header back to empty if needed.
v2: Switch to debugfs entry instead of load time parameter.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow to reset the table on the fly.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this interface is related to specific version of umc, distinguish it
from ras_late_init
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move umc ras init from ras module to umc block, generic ras module
should pay less attention to specific ras block.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umc late init is umc specific, it's more suitable to be put in umc block
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
define sched_policy in case CONFIG_HSA_AMD is not
enabled, with this there is no need to check for CONFIG_HSA_AMD
else where in driver code.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If CONFIG_HSA_AMD is not set, build fails:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.o: In function `amdgpu_device_ip_early_init':
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1626: undefined reference to `sched_policy'
Use CONFIG_HSA_AMD to guard this.
Fixes: 1abb680ad371 ("drm/amdgpu: disable gfxoff while use no H/W scheduling policy")
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the ASIC specific code into a new callback function.
v2: mask the flags for SI and CIK instead of a BUG_ON().
v3: remove last missed BUG_ON().
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unify how we map the UAPI flags to the PTE hardware flags for a mapping.
Only the MTYPE is actually ASIC dependent, all other flags should be
copied over 1 to 1 and ASIC differences are handled later on.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add asic flag to enable device probe during kfd init.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While gfxoff is enabled, the mmVM_XXX registers will be 0xfffffff while the GFX
is in "off" state. KFD queue creattion doesn't use ring based method, so it will
trigger a VM fault.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no point retrying page faults in VMID0. Those faults are
always fatal.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As more and more new asics start to reuse the old device IDs before
launch, there is a need to quickly override the existing asic type
corresponding to the reused device ID through a kernel parameter. With
this, engineers no longer need to rely on local hack patches,
facilitating cooperation across teams.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to check if the nbios funcs exist before
checking the individual pointers.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
ras recovery_init should be called after ttm init,
bad page reserve should be put in front of gpu reset since i2c
may be unstable during gpu reset.
add cleanup for recovery_init and recovery_fini
v2: add more comment and print.
remove cancel_work_sync in recovery_init.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
save umc error records to ras bad page array
v2: add bad pages before gpu reset
v3: add NULL check for adev->umc.funcs
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support eeprom records load and save for ras,
move EEPROM records storing to bad page reserving
v2: remove redundant check for con->eh_data
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change bps type from retired page to eeprom table record, prepare for
saving umc error records to eeprom
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix typo which messed up the calculation.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Restoring clock gating break SMU opeartion afterwards, avoid
this until this further invistigated with SMU.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This optimizes out the pci device id usage in KFD and makes the code
more maintainable.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These wptrs must be pinned and GPU accessible when this is called
from hqd_load functions. So they should never fault. This resolves
a circular lock dependency issue involving four locks including the
DQM lock and mmap_sem.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for loading XGMI/RAS FW
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change r type from bool to int, suitable for both bool and int return
value
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add sw_fini interface of df_funcs.
This interface will remove sysfs file of df_cntr_avail
function.
The old behavior only create sysfs of df_cntr_avail
in sw_init, but never remove it for lack of sw_fini
interface. With this,driver will report create
sysfs fail when it's loaded for the second time.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_nbio_ras_late_init is used to init nbio specfic
ras debugfs/sysfs node and nbio specific interrupt handler.
It can be shared among nbio generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_mmhub_ras_late_init is used to init mmhub specfic
ras debugfs/sysfs node and mmhub specific interrupt handler.
It can be shared among mmhub generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_sdma_ras_late_init is used to init sdma specfic
ras debugfs/sysfs node and sdma specific interrupt handler.
It can be shared among sdma generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_gfx_ras_late_init is used to init gfx specfic
ras debugfs/sysfs node and gfx specific interrupt handler.
It can be shared among gfx generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_gmc_ras_late_init is used to init gmc specfic
ras debugfs/sysfs node and gmc specific interrupt handler.
It can be shared among gmc generations.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to prevent access to dangling pointers
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of RAS error allow user configure auto system
reboot through ras_ctrl.
This is also part of the temproray work around for the RAS
hang problem.
v4: Use latest kernel API for disk sync.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
Under certain conditions, when some IP bocks take a RAS error,
we can get into a situation where a GPU reset is not possible
due to issues in RAS in SMU/PSP.
Temporary fix until proper solution in PSP/SMU is ready:
When uncorrectable error happens the DF will unconditionally
broadcast error event packets to all its clients/slave upon
receiving fatal error event and freeze all its outbound queues,
err_event_athub interrupt will be triggered.
In such case and we use this interrupt
to issue GPU reset. THe GPU reset code is modified for such case to avoid HW
reset, only stops schedulers, deatches all in progress and not yet scheduled
job's fences, set error code on them and signals.
Also reject any new incoming job submissions from user space.
All this is done to notify the applications of the problem.
v2:
Extract amdgpu_amdkfd_pre/post_reset from amdgpu_device_lock/unlock_adev
Move amdgpu_job_stop_all_jobs_on_sched to amdgpu_job.c
Remove print param from amdgpu_ras_query_error_count
v3:
Update based on prevoius bug fixing patch to properly call amdgpu_amdkfd_pre_reset
for other XGMI hive memebers.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Issue 1:
In XGMI case amdgpu_device_lock_adev for other devices in hive
was called to late, after access to their repsective schedulers.
So relocate the lock to the begining of accessing the other devs.
Issue 2:
Using amdgpu_device_ip_need_full_reset to switch the device list from
all devices in hive to the single 'master' device who owns this reset
call is wrong because when stopping schedulers we iterate all the devices
in hive but when restarting we will only reactivate the 'master' device.
Also, in case amdgpu_device_pre_asic_reset conlcudes that full reset IS
needed we then have to stop schedulers for all devices in hive and not
only the 'master' but with amdgpu_device_ip_need_full_reset we
already missed the opprotunity do to so. So just remove this logic and
always stop and start all schedulers for all devices in hive.
Also minor cleanup and print fix.
v4: Minor coding style fix.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trying to evict things from the current working set doesn't work that
well anymore because of per VM BOs.
Rely on reserving VRAM for page tables to avoid contention.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This hopefully helps reduce the contention for page tables.
v2: adjust maximum reported VRAM size as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make VM updates depend on the moving fence instead of the exclusive one.
Makes it less likely to actually have a dependency.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gds clearing workaround should only be applied on asics that support gfx ras
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
free ras_if if ras is not supported
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub callback functions are not initialized for all the ASICs
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This workaround is better handled in user mode in a way that doesn't
require allocating extra memory and breaking userptr BOs.
The TLB bug is a performance bug, not a functional or security bug.
Hence it is safe to remove this kernel part of the workaround to
allow a better workaround using only virtual address alignments in
user mode.
v2: Removed VI_BO_SIZE_ALIGN definition
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For compute VRAM allocations on Arturus use the new RW mtype
for non-coherent local memory, CC mtype for coherent local
memory and PTE_SNOOPED bit for invalidating non-dirty cache
lines on remote XGMI mappings.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same BO can be mapped with different PTE flags by different GPUs.
Therefore determine the PTE flags separately for each mapping instead
of storing them in the KFD buffer object.
Add a helper function to determine the PTE flags to be extended with
ASIC and memory-type-specific logic in subsequent commits.
v2: Split Arcturus-specific MTYPE changes into separate commit
v3: Fix return type of get_pte_flags to uint64_t
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arcturus repurposed mtype WC to RW. Modify gmc functions
to support the new mtype
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
call helper function in late init phase to handle ras init
for nbio ip block
v2: init local var r to 0 in case the function return failure
on asics that don't have ras_late_init implementation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ras_late_init callback function will be used to do common ras
init in late init phase.
v2: call ras_late_fini to do cleanup when fails to enable interrupt
v3: rename sysfs/debugfs node name to pcie_bif_xxx
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function will be called in late init phase to do mmhub
ras init
v2: check ras_late_init function pointer before invoking the
function
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
call helper function in late init phase to handle ras init
for gmc ip block
v2: call ras_late_fini to do clean up when fail to enable interrupt
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
call helper function in late init phase to handle ras init
for sdma ip block
v2: call ras_late_fini to do clean up when fail to enable interrupt
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
call helper function in late init phase to handle ras init
for gfx ip block
v2: call ras_late_fini to do clean up when fail to enable interrupt
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In late_init for ras, the helper function will be used to
1). disable ras feature if the IP block is masked as disabled
2). send enable feature command if the ip block was masked as enabled
3). create debugfs/sysfs node per IP block
4). register interrupt handler
v2: check ih_info.cb to decide add interrupt handler or not
v3: add ras_late_fini for cleanup all the ras fs node and remove
interrupt handler
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the hardware that can not enable BIF ring for IH cookies for both
ras_controller_irq and err_event_athub_irq, the driver has to poll the
status register in irq handling and ack the hardware properly when there
is interrupt triggered
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ras controller interrupt and Ras err event athub interrupt are two dedicated
interrupts for RAS support.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ras_controller_interrupt and err_event_interrupt are ras specific interrupts.
add functions to check their status and ack them if they are generated. both
funcitons should only be invoked in ISR when BIF ring is disabled or even not
initialized.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no functional change, just switch to new structures
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More nbio funcitonalities will be added and nbio could
be treated as an ip block like gfx/sdma.etc
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-6-kraxel@redhat.com
Rename the embedded struct vma_offset_manager, new name is _vma_manager.
ttm_bo_device.vma_manager changed to a pointer.
The ttm_bo_device_init() function gets an additional vma_manager
argument which allows to initialize ttm with a different vma manager.
When passing NULL the embedded _vma_manager is used.
All callers are updated to pass NULL, so the behavior doesn't change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190905070509.22407-2-kraxel@redhat.com
drm-next-5.4-2019-08-30:
amdgpu:
- Add DC support for Renoir
- Add some GPUVM hw bug workarounds
- add support for the smu11 i2c controller
- GPU reset vram lost bug fixes
- Navi1x powergating fixes
- Navi12 power fixes
- Renoir power fixes
- Misc bug fixes and cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830212650.5055-1-alexander.deucher@amd.com
There is missing "if defined" CONFIG_DRM_AMD_DC block for non DC
configurations. This will cause link error. The patch is fixing that.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110979
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In renoir's vega10_ih model, there's a security change in mmIH_CHICKEN
register, that limits IH to use physical address (FBPA, GPA) directly.
Those chicken bits need to be programmed first.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should be checked at all places job is accessed.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DC support for renoir.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init SDMA HW base configuration and enable idle INT for rn.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix compute ring test failure in sriov scenario.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
stolen memory should be fixed in visible region.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DRM_DEBUG_DRIVER debug message.
Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to add new asic cases. This is a sw display
implementation, so just drop the error message so when
we add new asics, all we have to do is add the virtual
dce IP module.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a3755341 ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver does not support these sensors yet and there is no point in
creating sysfs attributes which will always return an error.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SOC15/vega10 the BACO reset & mode1 would introduce vram lost
in high end address range, current kmd's vram lost checking cannot
catch it since it only check very ahead visible frame buffer
v2:
cover NV as well
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in_suspend flag should be set in amdgpu_device_suspend/resume in pairs,
instead of gfx10 ip suspend/resume function.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For picasso(adev->pdev->device == 0x15d8)&raven2(adev->rev_id >= 0x8),
firmware is sufficient to support gfxoff.
In commit 98f58ada2d, for picasso&raven2,
return directly and cause gfxoff disabled.
Fixes: 98f58ada2d ("drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible")
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs ATPX rather than _PR3 to really turn off the dGPU. This can save
~5W when dGPU is runtime-suspended.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement HW I2C enigne controller to be used by the RAS EEPROM
table manager. This is based on code from ATITOOLs.
v2:
Rename the file and all function prefixes to smu_v11_0_i2c
By Luben's observation always fill the TX fifo to full so
we don't have garbadge interpreted by the slave as valid data.
v3:
Remove preemption disable as the HW I2C controller will not
stop the clock on empty TX fifo and so it's not critical to
keep not empty queue.
Switch to fast mode 400 khz SCL clock for faster read and write.
v5:
Restore clock gating before releasing I2C bus and fix some
style comments.
v6:
squash in warning fix, fix includes (Alex)
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RAS EEPROM table manager to eanble RAS errors to be stored
upon appearance and retrived on driver load.
v2: Fix some prints.
v3:
Fix checksum calculation.
Make table record and header structs packed to do correct byte value sum.
Fix record crossing EEPROM page boundry.
v4:
Fix byte sum val calculation for record - look at sizeof(record).
Fix some style comments.
v5: Add description to EEPROM_TABLE_RECORD_SIZE and syntax fixes.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4f8bc72fbf.
It turned out that a single reserved queue wouldn't be
sufficient for page fault handling.
Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface. This has caused a problem where status
registers requiring HW to update have a 1 cycle delay, due to the
register update having to go through GRBM.
SW may operate on an incorrect value if they write a register and
immediately check the corresponding status register.
Registers requiring HW to clear or set fields may be delayed by 1 cycle.
For example,
1. write VM_INVALIDATE_ENG0_REQ mask = 5a
2. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
a. HW will reset VM_INVALIDATE_ENG0_ACK = 0 until invalidation is complete
3. write VM_INVALIDATE_ENG0_REQ mask = 5a
4. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
a. First read of VM_INVALIDATE_ENG0_ACK = 5a instead of 0
b. Second read of VM_INVALIDATE_ENG0_ACK = 0 because
the remote GRBM h/w register takes one extra cycle to be cleared
c. In this case, SW will see a false ACK if they exit on first read
Affected registers (only GC variant) | Recommended Dummy Read
--------------------------------------+----------------------------
VM_INVALIDATE_ENG*_ACK | VM_INVALIDATE_ENG*_REQ
VM_L2_STATUS | VM_L2_STATUS
VM_L2_PROTECTION_FAULT_STATUS | VM_L2_PROTECTION_FAULT_STATUS
VM_L2_PROTECTION_FAULT_ADDR_HI/LO32 | VM_L2_PROTECTION_FAULT_ADDR_HI/LO32
VM_L2_IH_LOG_BUSY | VM_L2_IH_LOG_BUSY
MC_VM_L2_PERFCOUNTER_HI/LO | MC_VM_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER_HI/LO | ATC_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER2_HI/LO | ATC_L2_PERFCOUNTER2_HI/LO
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-next-5.4-2019-08-23:
amdgpu:
- Enable power features on Navi12
- Enable power features on Arcturus
- RAS updates
- Initial Renoir APU support
- Enable power featyres on Renoir
- DC gamma fixes
- DCN2 fixes
- GPU reset support for Picasso
- Misc cleanups and fixes
scheduler:
- Possible race fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823202620.3870-1-alexander.deucher@amd.com
So that we properly handle them on older asics.
Fixes: 3ff985485b ("drm/amdgpu: Export function to flush TLB of specific vm hub")
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use unsigned long type for the same ras count variable.
This will avoid overflow on 64 bit system.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will enable indirect SRAM loading for VCN DPG mode initialization.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 444a0fea51.
We are ready to enable it now.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates gc/sdma goldensetting for renoir
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable SDMA PG flag during device ip early init.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for SDMA clockgating on RN.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DF clock gating during DF IP early init.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable athub MG and LS clock gating.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable IH clock gating during IH block initialized.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates gfxoff feature.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add set_gfx_cgpg implement
v2: check if using sw_smu (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Implement PowerUpSDMA/PowerDownSDMA interfaces in the swSMU for renoir
2.adjust smu ip block ahead of gfx&sdma ip block
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: set num_types based on num_instances
navi1x has 2 sdma engines but commit
"e7b58d03b678 drm/amdgpu: reorganize sdma v4 code to support more instances"
changes the max number of sdma irq types (AMDGPU_SDMA_IRQ_LAST) from 2 to 8
which causes amdgpu_irq_gpu_reset_resume_helper() to recover irq of sdma
engines with following logic:
(enable irq for sdma0) * 1 time
(enable irq for sdma1) * 1 time
(disable irq for sdma1) * 6 times
as a result, after gpu reset, interrupt for sdma1 is lost.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to grab a reference to the fence we wait for.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
arcturus for sriov would use the unified mc base address
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since agp is not used for sriov, just disable it
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/nv.c: In function 'nv_common_early_init':
drivers/gpu/drm/amd/amdgpu/nv.c:471:7: warning:
variable 'psp_enabled' set but not used [-Wunused-but-set-variable]
It's not used since inroduction in
commit c6b6a42175 ("drm/amdgpu: add navi10 common ip block (v3)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error out if the AMDGPU_CS ioctl is called with multiple SYNCOBJ_OUT and/or
TIMELINE_SIGNAL chunks, since otherwise the last chunk wins while the
allocated array as well as the reference counts of sync objects are leaked.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable MMHUB PG for navi10 according to the production requirement.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not expose those unsupported clock domains through sysfs on
Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
so that more visible vram can be available for umd.
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is to improve performance.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
firmware header information is printed for direct fw loading but not
added for psp fw loading yet
v2: squash in warning fix (Alex)
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/r list in rlc firmware is ready, so remove the special autoload handling
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to set certain power gating flags after we determine
if the firmware version is sufficient to support gfxoff.
Previously we set the pg flags in early init, but we later
we might have disabled gfxoff if the firmware versions didn't
support it. Move adding the additional pg flags after we
determine whether or not to support gfxoff.
Fixes: 005440066f ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
From rdma.git
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies, and is being taken
into hmm.git due to dependencies in the next patches.
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXVqvpwAKCRDj7w1vZxhR
xa3RAQDzAnt5zeesAxX4XhRJzHoCEwj2PJj9Re6xMJ9PlcfcvwD+OS+bcB6jfiXV
Ug9IBd/DqjlmD9G9MxFxfSV946rksAw=
=8uv4
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dma-buf: add reservation_object_fences helper, relax
reservation_object_add_shared_fence, remove
reservation_object seq number (and then
restored)
- dma-fence: Shrinkage of the dma_fence structure,
Merge dma_fence_signal and dma_fence_signal_locked,
Store the timestamp in struct dma_fence in a union with
cb_list
Driver Changes:
- More dt-bindings YAML conversions
- More removal of drmP.h includes
- dw-hdmi: Support get_eld and various i2s improvements
- gm12u320: Few fixes
- meson: Global cleanup
- panfrost: Few refactors, Support for GPU heap allocations
- sun4i: Support for DDC enable GPIO
- New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
Toppoly TD043MTEA1
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixup dma_resv rename fallout]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
This is a significant simplification, it eliminates all the remaining
'hmm' stuff in mm_struct, eliminates krefing along the critical notifier
paths, and takes away all the ugly locking and abuse of page_table_lock.
mmu_notifier_get() provides the single struct hmm per struct mm which
eliminates mm->hmm.
It also directly guarantees that no mmu_notifier op callback is callable
while concurrent free is possible, this eliminates all the krefs inside
the mmu_notifier callbacks.
The remaining krefs in the range code were overly cautious, drivers are
already not permitted to free the mirror while a range exists.
Link: https://lore.kernel.org/r/20190806231548.25242-6-jgg@ziepe.ca
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This reverts
67c97fb79a ("dma-buf: add reservation_object_fences helper")
dd7a7d1ff2 ("drm/i915: use new reservation_object_fences helper")
0e1d8083bd ("dma-buf: further relax reservation_object_add_shared_fence")
5d344f58da ("dma-buf: nuke reservation_object seq number")
The scenario that defeats simply grabbing a set of shared/exclusive
fences and using them blissfully under RCU is that any of those fences
may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this
scenario, while keeping the rcu_read_lock we need to establish that no
fence was changed in the dma_resv after a read (or full) memory barrier.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814182401.25009-1-chris@chris-wilson.co.uk
Integrate the mode2 reset into rest sequence.
v2:
Check ppfuncs pointer for NULL
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Double defintion of 'i'
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When VM state changed and system in large bar mode,
make sure to use CPU update function, otherwise use
SDMA function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gang Ba <gaba@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have done this for pre-GFX10 asics, but GFX10 did not pick up the
new change. The below is the commit message for that change.
This is recommended by HW designers. Previously when it was set to 1,
the PDE walk error in VM fault will be treated as
PERMISSION_OR_INVALID_PAGE_FAULT rather than usually expected OTHER_FAULT.
As a result, the retry control in VM_CONTEXT*_CNTL will change accordingly.
The above behavior is kind of abnormal. Furthermore, the
PDE_FAULT_CLASSIFICATION == 1 feature was targeted for very old ASICs
and it never made it way to production. Therefore, we should set it to 0.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The printing we did for GFX9 was not propogated to GFX10 somehow, so fix
it now.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RW is also useful in most cases.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calling amdgpu function to invalidate TLB, instead of using a
kfd implementation. Delete the kfd local TLB invalidation
implementation.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for kfd to reuse amdgpu TLB invalidation function.
On gfx10, kfd only needs to flush TLB on gfx hub but not
on mm hub. So export a function for KFD flush TLB only on
specific hub.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get mmhub ea ras error count by accessing EDC_CNT register
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
simplify driver code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo error:
change function name from "amdgput_ctx_total_num_entities" to
"amdgpu_ctx_total_num_entities".
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use dma_set_mask_and_coherent to set both masks in one go, and remove
the no longer required fallback, as the kernel now always accepts
larger than required DMA masks. Fail the driver probe if we can't
set the DMA mask, as that means the system can only support a larger
mask.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu uses a need_dma32 flag to indicate to the drm core that some
allocations need to be done using GFP_DMA32, but it only checks the
device addressing capabilities to make that decision. Unfortunately
PCIe root ports that have limited addressing exist as well. Use the
dma_addressing_limited instead to also take those into account.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Be more consistent with the naming of the other DMA-buf objects.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/323401/
The SOC15_REG_OFFSET() macro wasn't used, making the soft recovery fail.
v2: use WREG32_SOC15 instead of WREG32 + SOC15_REG_OFFSET
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The current code won't likely work on production hw when
it ships so leave it as experimental until it's ready.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir need not load mec2 jump table with psp.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP has issue for renoir, that will cause VCN fw failed to be loaded. So use
direct loading for the moment till the issue is addressed.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default, set amdgpu ucode type to AMDGPU_FW_LOAD_PSP.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thus enable VCN2.0 for Renoir
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCN range aperture to NBIO 7.0
v2: rebase (Alex)
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By adding new Renoir VCN firmware
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds gfx golden settings for renoir real asic.
v2: update settings (Alex)
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Add psp ip block
2. Use direct loading type by default and it can also config psp
loading type.
3. Bypass sos fw loading and xgmi&ras interface
v2: drop TA loading
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In renoir's ih model, there's a change in mmIH_CHICKEN
register, that limits IH to use physical address directly.
Those chicken bits need to be programmed first.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch sets fw load type as direct for renoir for the moment.
Will switch to psp when psp is ready.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds common ip support for renoir.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds renoir support for gpu_info firmware and ip block setting.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SOC15_REG_OFFSET() macro wasn't used, making the soft recovery fail.
v2: use WREG32_SOC15 instead of WREG32 + SOC15_REG_OFFSET
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init MC_MGCG/LS flag. Also apply to athub CG.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 2 mmhub instances CG
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Follow the hw spec, and no need to consider gfxoff on Arcturus
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missed AMD_CG_SUPPORT_GFX_CP_LS accidently when commit patch before
drm/amdgpu: enable gfx clock gating for Arcturus
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
feature mask info is enough for rocm tool,
"cat /sys/class/drm/card0/device/ras/features" will get the
info like this:
feature mask: 0x3ffb
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Untie the bind of get/set athub CG state from mmhub, for cosmetic fix and Asic
not using mmhub 1.0. Besides, also fix wrong athub CG state in amdgpu_pm_info.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init sdma MGCG/LS flag
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ARCTURUS case in sdma set clockgating function
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shorten the code with RREG32_SDMA/WREG32_SDMA macro in CG part.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init hdp MGCG/LS flag as Vega20
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add hdp CGLS for Arcturus in set common clockgating function
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ARCTURUS case in gfx set clockgating function. No 3d clock on Arcturus.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ras sub block index could be passed from shell command
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sub_block_index can be passed from user level, so
add one check before accessing the array first to
prevent array index out of bound problem.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC already handles this correctly since amdgpu minor version 31. Bump
the minor version again so that xf86-video-amdgpu can take advantage of
this working without DC as well now.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9ed2c993d7.
SET_CONFIG_REG writes to memory if register shadowing is enabled,
causing a VM fault.
NGG streamout is unstable anyway, so all UMDs should use legacy
streamout. I think Mesa is the only driver using NGG streamout.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-next-5.4-2019-08-09:
Same as drm-next-5.4-2019-08-06, but with the
readq/writeq stuff fixed and 5.3-rc3 backmerged.
amdgpu:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- Enable mclk DPM for Navi
- Misc DC display fixes
- Add perfmon support for DF
- Add scatter/gather display support for Raven
- Improve SMU handling for GPU reset
- RAS support for GFX
- Drop last of drmP.h
- Add support for wiping memory on buffer release
- Allow cursor async updates for fb swaps
- Misc fixes and cleanups
amdkfd:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- CWSR trap handlers updates for gfx9, 10
- Drop last of drmP.h
- Update MAINTAINERS
radeon:
- Misc fixes and cleanups
- Make kexec more reliable by tearing down the GPU
ttm:
- Add release_notify callback
uapi:
- Add wipe memory on release flag for buffer creation
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: resolved conflicts with ttm resv moving]
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809184807.3381-1-alexander.deucher@amd.com
Other cores don't busy wait any more and we removed the last user of checking
the seqno for changes. Drop updating the number for shared fences altogether.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/322379/?series=64837&rev=1
atomic 64 bits REG operations are useless currently
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
implement 64 bits operations via 32 bits interface
v2: make use of lower_32_bits() and upper_32_bits() macros
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
what we really want is a read or write that is guaranteed to be 64 bits
at a time, atomic64 operations are supported on all architectures
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXUwPUAAKCRDj7w1vZxhR
xQ4lAQDK2ijx29YHeZspbOwP4Nwq95DFs1uQcSm5GvbRt1JSowD9EwkLeNfkPkel
Xv1Ts/Frgq7ckH2e2zkLPyCOFCHd0wA=
=rIUl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
Make HMM_MIRROR an option that is selected by drivers wanting to use it
instead of a user visible option as it is just a low-level implementation
detail.
Link: https://lore.kernel.org/r/20190806160554.14046-15-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All users pass PAGE_SIZE here, and if we wanted to support single entries
for huge pages we should really just add a HMM_FAULT_HUGEPAGE flag instead
that uses the huge page size instead of having the caller calculate that
size once, just for the hmm code to verify it.
Link: https://lore.kernel.org/r/20190806160554.14046-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The start, end and page_shift values are all saved in the range structure,
so we might as well use that for argument passing.
Link: https://lore.kernel.org/r/20190806160554.14046-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The list is used to add the range to another list as an entry in the core
hmm code, and intended as a private member not exposed to drivers. There
is no need to initialize it in a driver.
Link: https://lore.kernel.org/r/20190806160554.14046-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hmm_range_fault can only return -EAGAIN if called with the
HMM_FAULT_ALLOW_RETRY flag, which amdgpu never does. Remove the handling
for the -EAGAIN case with its non-standard locking scheme.
Link: https://lore.kernel.org/r/20190806160554.14046-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This reverts commit 9ed2c993d7.
SET_CONFIG_REG writes to memory if register shadowing is enabled,
causing a VM fault.
NGG streamout is unstable anyway, so all UMDs should use legacy
streamout. I think Mesa is the only driver using NGG streamout.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Tested-by: Paul Gover <pmw.gover@yahoo.co.uk>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ip_block.status.hw for GMC wasn't set to
false on suspend during GPU reset and so on resume gmc_v9_0_resume
wasn't called.
Caused by 'drm/amdgpu: fix double ucode load by PSP(v3)'
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move amdgpu_discovery_reg_base_init() from navi1*_reg_base_init() to a
common function nv_reg_base_init().
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove confused ras error type info
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear the flag after hw suspend, otherwise it skips the corresponding hw
resume.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Tested-by: Paul Gover <pmw.gover@yahoo.co.uk>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Complete the abstraction of the ww_mutex inside the reservation object.
This allows us to add more handling and debugging to the reservation
object in the future.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/320761/
VCN 2.0 firmware now requires a packet start command to be sent before
any other decode ring buffer command.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This
bit was previously set by the RBC HW on older firmware. Newer firmware
uses a SW RBC and this bit has to be set by the driver.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi12 has the same interface as Navi10
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Load DC and amdgpu display manager
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCN2 ip block for Navi12
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Navi12 to VCN family
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rlc save restore list is not ready yet for navi12
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as other navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the enablement bit of SMU RLC handshake.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
common golden settings are put in golden_settings_sdma_5 array
v2: update settings (Alex)
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual display is a sw display interface for
bring up and virtualization or for cards without
display hardware.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi10.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as other navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Declare the firmwares and load the proper ones for navi12.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as other navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as other navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used yet.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the name properly to load the right ucode.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
got from mmCP_MAX_CONTEXT and mmPA_SC_FIFO_SIZE
v2: squash all navi asics together because the
settings are the same.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as other navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi10.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
don't enable any cg/pg features yet.
v2: calculate external revision id from revision id so that we can
differentiate navi12 A0 from A1 directly.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as other navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
same with navi10
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up the register offset map for navi12.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed loading duplicate instances of SDMA FW for Arcturus.
We use a single image for all instances.
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arcturus has 8 instances of SDMA. Update host to PSP interface
to handle it.
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need to handle it like other asics.
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the response in hex with the apprpriate mask.
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the arcturus specific psp metadata to the
amdgpu firmware and properly parse it when loading it.
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hook up the SW SMU power profile switch in KFD routine.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ce can also trigger interrupt, and even both ce and ue error can be
found in one ras query, distinguishing between ce and ue in interrupt
handler is uncessary.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Suggested-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we only read error information for correctable error in interrupt
handler, gpu reset is unnecessary since there is no data lost
in correctable error
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the initial value of ecc error count can be adjusted
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable umc ce interrupt and initialize ecc error count
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
correctable error can also trigger interrupt in some ras blocks
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umc error address query can get ce/ue error address and clear error
status
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use umc_for_each_channel to make code simpler
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
common function for all umc versions, loop for each umc channel is
a frequent used operation in umc block, define it as a macro to
simplify code
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add initialization for new members of amdgpu_umc structure
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
expose more parameters and functions of specific umc version to common
umc layer, so amdgpu_umc layer and other blocks could access them
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clearing MCA_STATUS is enough to reset the whole MCA, writing zero to
MCA_ADDR is unnecessary
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currenly the error check on variable instance is always false because
it is a uint32_t type and this is never less than zero. Fix this by
making it an int type.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 7d0e6329df ("drm/amdgpu: update more sdma instances irq support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Following bitmap layout logic introduced by:
"drm/amdgpu: support get_cu_info for Arcturus".
v2: squash in fixup for gfx_v9_0.c (Alex)
v3: squash in debug print output fix
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change is because SE/SH layout on Arcturus is 8*1, different from
4*2(or 4*1) on Vega ASICs.
Currently the cu bitmap array is 4x4 size, and besides the bitmap is used widely
across SW stack. To mostly reduce the scale of impact, we make the cu bitmap
array compatible with SE/SH layout on Arcturus. Then the store of cu bits of
each shader array for Arcturus will be like below:
SE0,SH0 --> bitmap[0][0]
SE1,SH0 --> bitmap[1][0]
SE2,SH0 --> bitmap[2][0]
SE3,SH0 --> bitmap[3][0]
SE4,SH0 --> bitmap[0][1]
SE5,SH0 --> bitmap[1][1]
SE6,SH0 --> bitmap[2][1]
SE7,SH0 --> bitmap[3][1]
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The registers used for VG20 are different in that certain performance
counters were split off to TXCLK3/4. Vega10/12 doesn't have this, so add
a new vg20_get_pcie_usage to reflect this change.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Memory used by KFD applications can contain sensitive information that
should not be leaked to other processes. The current approach to prevent
leaks is to clear VRAM at allocation time. This is not effective because
memory can be reused in other ways without being cleared. Synchronously
clearing memory on the allocation path also carries a significant
performance penalty.
Stop clearing memory at allocation time. Instead mark the memory for
wipe on release.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wipe VRAM memory containing sensitive data when moving or releasing
BOs. Clearing the memory is pipelined to minimize any impact on
subsequent memory allocation latency. Use of a poison value should
help debug future use-after-free bugs.
When moving BOs, the existing ttm_bo_pipelined_move ensures that the
memory won't be reused before being wiped.
When releasing BOs, the BO is fenced with the memory fill operation,
which results in queuing the BO for a delayed delete.
v2: Move amdgpu_amdkfd_unreserve_memory_limit into
amdgpu_bo_release_notify so that KFD can use memory that's still
being cleared in the background
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
previously the ucode loading of PSP was repreated, one executed in
phase_1 init/re-init/resume and the other in fw_loading routine
Avoid this double loading by clearing ip_blocks.status.hw in suspend or reset
prior to the FW loading and any block's hw_init/resume
v2:
still do the smu fw loading since it is needed by bare-metal
v3:
drop the change in reinit_early_sriov, just clear all block's status.hw
in the head place and set the status.hw after hw_init done is enough
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SRIOV the SOS fw of PSP is loaded in hypervisor thus
guest won't tell the version of it, and judging feature by
reading the sos fw version in guest side is completely wrong
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we can simplify all those unnecessary function under
SRIOV for vega10 since:
1) PSP L1 policy is by force enabled in SRIOV
2) original logic always set all flags which make itself
a dummy step
besides,
1) the ih_doorbell_range set should also be skipped
for VEGA10 SRIOV.
2) the gfx_common registers should also be skipped
for VEGA10 SRIOV.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-fixes-5.3-2019-07-31:
amdgpu:
- Fix temperature granularity for navi
- Fix stable pstate setting for navi
- Fix VCN DPM enablement on navi
- Fix error handling on CS ioctl when processing dependencies
- Fix possible information leak in debugfs
amdkfd:
- fix memory alignment for VegaM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731191648.25729-1-alexander.deucher@amd.com
some subblocks of gfx fail in inject test, disable them
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check gfx error count in both ras querry function and
ras interrupt handler.
gfx ras is still disabled by default due to known stability
issue found in gpu reset.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add functions for RAS error inject and query error counter
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
error injection address is not in gpu address space
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
only ue and ce errors are supported
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add err_data parameter in interrupt cb for ras clients
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add error data as parameter for ras interrupt cb and process it
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
query umc ras error address, translate it to gpu 4k page view
and save it.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add related registers, callback function and channel index table
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
more than one error address may be recorded in one query
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove the check of ErrorCodeExt
v2: refine the if condition for ue counting
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
create new amdgpu_umc structure to for more umc
settings in future and switch to the new structure
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
replace some 32bit macros with 64bit operations to simplify code
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add 64 bits register access functions
v2: implement 64 bit functions in low level
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: increase ras ce/ue error count
v2: log the number of correctable and uncorrectable errors
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check umc error count in both ras querry function and
ras interrupt handler
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
init umc callback function for vega20 in sw early init phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement umc query_ras_error_count function to support querry
both correctable and uncorrectable error
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is common structure as UMC callback function
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the driver needs to program RSMU and UMC registers to
support vega20 RAS feature
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are common structures that can be included by IP specific
source files
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.
Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.
Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Michel Dänzer" <michel.daenzer@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: Amber Lin <Amber.Lin@amd.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Thomas Zimmermann <contact@tzimmermann.org>
Cc: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-4-daniel.vetter@ffwll.ch
VCN should be used for Vega20 later ASICs while UVD and VCE
are for previous ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().
Fix the path by allocating the array with kcalloc().
The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed during the addition of VegaM support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we should pass irq type, instead of irq client id,
to irq_get/put interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN should be used for Vega20 later ASICs while UVD and VCE
are for previous ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update for sdma ras ecc_irq and other minors.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arcturus VCN should powergate in the way as Navi.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arcturus powerplay is ready to use.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize base address for those IPs which are used in powerplay.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().
Fix the path by allocating the array with kcalloc().
The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN 2.0 firmware now requires a packet start command to be sent before
any other decode ring buffer command.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Unified feature enable status format in sysfs
2. Rename ppfeature to pp_features to adapt other pp sysfs node name
3. this function support all asic, not asic related function.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Rui Huang <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Units in the GDS block default to allowing all VMIDs access to all
entries. Disable shader access to the GDS, GWS, and OA blocks from all
compute and gfx VMIDs by default. For compute, HWS firmware will set
up the access bits for the appropriate VMID when a compute queue
requires access to these blocks.
The driver will handle enabling access on-demand for graphics VMIDs.
Leaving VMID0 with full access because otherwise HWS cannot save or
restore values during task switch.
v2: Fixed code and comment styling.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This
bit was previously set by the RBC HW on older firmware. Newer firmware
uses a SW RBC and this bit has to be set by the driver.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add restriction to dissallow GTT domain if the relevant BO
doesn't have USWC flag set to avoid the APU hang scenario.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When doing a GPU reset or unloading the driver, we need to
put the SMU into the apprpriate state for the re-init after
the reset or unload to reliably work.
I don't think this is necessary for BACO because the SMU actually
controls the BACO state to it needs to be active.
For suspend (S3), the asic is put into D3 so the SMU would be
powered down so I don't think we need to put the SMU into
any special state.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi uses either mode1 or baco depending on various
conditions.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APUs only support mode2 reset. dGPUs use either mode1 or
baco depending on various conditions.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes the driver may have to behave differently depending
on the method we are using to reset the GPU.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add checking for possible invalid input and null pointer. And
drop redundant code.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enables gpu_vm_support in dm and adds
AMDGPU_GEM_DOMAIN_GTT as supported domain
v2:
Move BO placement logic into amdgpu_display_supported_domains
v3:
Use amdgpu_bo_validate_uswc in amdgpu_display_supported_domains.
v4:
amdgpu_bo_validate_uswc moved to sepperate patch.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This verifies we don't add GTT as allowed domain for APUs when USWC
is disabled.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the logic to clear AMDGPU_GEM_CREATE_CPU_GTT_USWC in
amdgpu_bo_do_create into standalone helper so it can be reused
in other functions.
v4:
Switch to return bool.
v5: Fix typos.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HW requires for caching to be unset for scanout BO
mappings when the BO placement is in GTT memory.
Usually the flag to unset is passed from user mode
but for FB mode this was missing.
v2:
Keep all BO placement logic in amdgpu_display_supported_domains
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
monitor xgmi errors via mc pie status through fica registers.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Kent Russell <Kent.Russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adding perfmon and fica atomic operations to adhere to data fabrics finite
state machine requirements for indirect register access.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Kent Russell <Kent.Russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navi14 share same PTE format with navi10.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we are using the signed FW now, and also using PSP firmware loading,
but it's still potential to break driver when loading FW directly
instead of PSP, so we should add offset.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop redundant check, duplicate check, duplicate setting
and fix the return value.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed during the addition of VegaM support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hi Linus,
Please, pull the following patches that mark switch cases where we are
expecting to fall through. These patches are part of the ongoing efforts
to enable -Wimplicit-fallthrough. Most of them have been baking in linux-next
for a whole development cycle.
Also, pull the Makefile patch that globally enables the
-Wimplicit-fallthrough option.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
Notice that with these changes, we completely get rid of all the
fall-through warnings in the kernel.
Thanks
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-----BEGIN PGP SIGNATURE-----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=J2sO
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
"This marks switch cases where we are expecting to fall through, and
globally enables the -Wimplicit-fallthrough option in the main
Makefile.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
With these changes, we completely get rid of all the fall-through
warnings in the kernel"
* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
Makefile: Globally enable fall-through warning
drm/i915: Mark expected switch fall-throughs
drm/amd/display: Mark expected switch fall-throughs
drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
drm/amdgpu/gfx10: Fix missing break in switch statement
drm/amdkfd: Fix missing break in switch statement
perf/x86/intel: Mark expected switch fall-throughs
mtd: onenand_base: Mark expected switch fall-through
afs: fsclient: Mark expected switch fall-throughs
afs: yfsclient: Mark expected switch fall-throughs
can: mark expected switch fall-throughs
firewire: mark expected switch fall-throughs
This allows easier expansion to other flags, and also makes the callers a
little easier to read.
Link: https://lore.kernel.org/r/20190726005650.2566-4-rcampbell@nvidia.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hmm_mirror_ops callback function sync_cpu_device_pagetables() passes a
struct hmm_update which is a simplified version of struct
mmu_notifier_range. This is unnecessary so replace hmm_update with
mmu_notifier_range directly.
Link: https://lore.kernel.org/r/20190726005650.2566-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
[jgg: white space tuning]
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
drm-fixes-5.3-2019-07-24:
amdgpu:
- RAS fixes for vega20
- Navi VCN fix
- DC audio fixes
- DC DSC fixes
- DC dongle fixes
- DC clk mgr fixes
- Fix DDC lines on some RV2 boards
- GDS fixes for compute
- Navi SMU fixes
ttm:
- Use the same attributes when freeing d_page->vaddr
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724210527.3415-1-alexander.deucher@amd.com
Add missing break statement in order to prevent the code from falling
through to case AMDGPU_IRQ_STATE_ENABLE.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: a644d85a5c ("drm/amdgpu: add gfx v10 implementation (v10)")
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
On vega20, there is an SMU message to query it. On navi, it's fetched
from the metrics table.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
