With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The btrfs fiemap code was incorrectly returning duplicate or overlapping
extents in some cases. cp was blindly trusting this result and we would
end up with a destination file that was bigger than the original because
some bytes were copied twice.
The fix here adjusts our offsets to make sure we're always moving
forward in the fiemap results.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When copy_from_user is only able to copy some of the bytes we requested,
we may end up creating a partially up to date page. To avoid garbage in
the page, we need to treat a partial copy as a zero length copy.
This makes the rest of the file_write code drop the page and
retry the whole copy instead of marking the partially up to
date page as dirty.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
cc: stable@kernel.org
Commit 914ee295af fixed deadlocks in
btrfs_file_write where we would catch page faults on pages we had
locked.
But, there were a few problems:
1) The x86-32 iov_iter_copy_from_user_atomic code always fails to copy
data when the amount to copy is more than 4K and the offset to start
copying from is not page aligned. The result was btrfs_file_write
looping forever retrying the iov_iter_copy_from_user_atomic
We deal with this by changing btrfs_file_write to drop down to single
page copies when iov_iter_copy_from_user_atomic starts returning failure.
2) The btrfs_file_write code was leaking delalloc reservations when
iov_iter_copy_from_user_atomic returned zero. The looping above would
result in the entire filesystem running out of delalloc reservations and
constantly trying to flush things to disk.
3) btrfs_file_write will lock down page cache pages, make sure
any writeback is finished, do the copy_from_user and then release them.
Before the loop runs we check the first and last pages in the write to
see if they are only being partially modified. If the start or end of
the write isn't aligned, we make sure the corresponding pages are
up to date so that we don't introduce garbage into the file.
With the copy_from_user changes, we're allowing the VM to reclaim the
pages after a partial update from copy_from_user, but we're not
making sure the page cache page is up to date when we loop around to
resume the write.
We deal with this by pushing the up to date checks down into the page
prep code. This fits better with how the rest of file_write works.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org>
cc: stable@kernel.org
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: fix fiemap bugs with delalloc
Btrfs: set FMODE_EXCL in btrfs_device->mode
Btrfs: make btrfs_rm_device() fail gracefully
Btrfs: Avoid accessing unmapped kernel address
Btrfs: Fix BTRFS_IOC_SUBVOL_SETFLAGS ioctl
Btrfs: allow balance to explicitly allocate chunks as it relocates
Btrfs: put ENOSPC debugging under a mount option
The Btrfs fiemap code wasn't properly returning delalloc extents,
so applications that trust fiemap to decide if there are holes in the
file see holes instead of delalloc.
This reworks the btrfs fiemap code, adding a get_extent helper that
searches for delalloc ranges and also adding a helper for extent_fiemap
that skips past holes in the file.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This fixes a bug introduced in d4d77629, where the device added online
(and therefore initialized via btrfs_init_new_device()) would be left
with the positive bdev->bd_holders after unmount. Since d4d77629 we no
longer OR FMODE_EXCL explicitly on blkdev_put(), set it in
btrfs_device->mode.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If shrinking done as part of the online device removal fails add that
device back to the allocation list and increment the rw_devices counter.
This fixes two bugs:
1) we could have a perfectly good device out of alloc list for no good
reason;
2) in the btrfs consisting of two devices, failure in btrfs_rm_device()
could lead to a situation where it was impossible to remove any of the
devices because of the "unable to remove the only writeable device"
error.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When decompressing a chunk of data, we'll copy the data out to
a working buffer if the data is stored in more than one page,
otherwise we'll use the mapped page directly to avoid memory
copy.
In the latter case, we'll end up accessing the kernel address
after we've unmapped the page in a corner case.
Reported-by: Juan Francisco Cantero Hurtado <iam@juanfra.info>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
- Check user-specified flags correctly
- Check the inode owership
- Search root item in root tree but not fs tree
Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs device shrinking and balancing ends up reallocating all the blocks
in order to allow COW to move them to new destinations. It is somewhat
awkward in terms of ENOSPC because most of the enospc code is built
around the idea that some operation on a reference counted tree triggers
allocations in the non-reference counted trees.
This commit changes the balancing code to deal with enospc by trying to
allocate a new chunk. If that allocation succeeds, we go ahead and
retry whatever failed due to enospc.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
ENOSPC in btrfs is getting to the point where the extra debugging isn't
required. I've put it under mount -o enospc_debug just in case someone
is having difficult problems.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I add the check on the return value of alloc_extent_map() to several places.
In addition, alloc_extent_map() returns only the address or NULL.
Therefore, check by IS_ERR() is unnecessary. So, I remove IS_ERR() checking.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Memory allocated by calling kstrdup() should be freed.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Commit bf5fc093c5 refactored
btrfs_ioctl_space_info() and introduced several security issues.
space_args.space_slots is an unsigned 64-bit type controlled by a
possibly unprivileged caller. The comparison as a signed int type
allows providing values that are treated as negative and cause the
subsequent allocation size calculation to wrap, or be truncated to 0.
By providing a size that's truncated to 0, kmalloc() will return
ZERO_SIZE_PTR. It's also possible to provide a value smaller than the
slot count. The subsequent loop ignores the allocation size when
copying data in, resulting in a heap overflow or write to ZERO_SIZE_PTR.
The fix changes the slot count type and comparison typecast to u64,
which prevents truncation or signedness errors, and also ensures that we
don't copy more data than we've allocated in the subsequent loop. Note
that zero-size allocations are no longer possible since there is already
an explicit check for space_args.space_slots being 0 and truncation of
this value is no longer an issue.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Mark the cloned backref_node as checked in clone_backref_node()
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs tracks uptodate state in an rbtree as well as in the
page bits. This is supposed to enable us to use block sizes other than
the page size, but there are a few parts still missing before that
completely works.
But, our readpage routine trusts this additional range based tracking
of uptodateness, much in the same way the buffer head up to date bits
are trusted for the other filesystems.
The problem is that sometimes we need to allocate memory in order to
split records in the rbtree, even when we are just clearing bits. This
can be difficult when our clearing function is called GFP_ATOMIC, which
can happen in the releasepage path.
So, what happens today looks like this:
releasepage called with GFP_ATOMIC
btrfs_releasepage calls clear_extent_bit
clear_extent_bit fails to allocate ram, leaving the up to date bit set
btrfs_releasepage returns success
The end result is the page being gone, but btrfs thinking the range is
up to date. Later on if someone tries to read that same page, the
btrfs readpage code will return immediately thinking the page is already
up to date.
This commit fixes things to fail the releasepage when we can't clear the
extent state bits. It covers both data pages and metadata tree blocks.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There is a race where btrfs_releasepage can drop the
page->private contents just as alloc_extent_buffer is setting
up pages for metadata. Because of how the Btrfs page flags work,
this results in us skipping the crc on the page during IO.
This patch sovles the race by waiting until after the extent buffer
is inserted into the radix tree before it sets page private.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (33 commits)
Btrfs: Fix page count calculation
btrfs: Drop __exit attribute on btrfs_exit_compress
btrfs: cleanup error handling in btrfs_unlink_inode()
Btrfs: exclude super blocks when we read in block groups
Btrfs: make sure search_bitmap finds something in remove_from_bitmap
btrfs: fix return value check of btrfs_start_transaction()
btrfs: checking NULL or not in some functions
Btrfs: avoid uninit variable warnings in ordered-data.c
Btrfs: catch errors from btrfs_sync_log
Btrfs: make shrink_delalloc a little friendlier
Btrfs: handle no memory properly in prepare_pages
Btrfs: do error checking in btrfs_del_csums
Btrfs: use the global block reserve if we cannot reserve space
Btrfs: do not release more reserved bytes to the global_block_rsv than we need
Btrfs: fix check_path_shared so it returns the right value
btrfs: check return value of btrfs_start_ioctl_transaction() properly
btrfs: fix return value check of btrfs_join_transaction()
fs/btrfs/inode.c: Add missing IS_ERR test
btrfs: fix missing break in switch phrase
btrfs: fix several uncheck memory allocations
...
take offset of start position into account when calculating page count.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
As this function is called in some error paths while not
removing the module, the __exit attribute prevents the kernel
image from linking when btrfs is compiled in statically.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When btrfs_alloc_path() fails, btrfs_free_path() need not be called.
Therefore, it changes the branch ahead.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This has been resulting in a BUT_ON(ret) after btrfs_reserve_extent in
btrfs_cow_file_range. The reason is we don't actually calculate the bytes_super
for a block group until we go to cache it, which means that the space_info can
hand out reservations for space that it doesn't actually have, and we can run
out of data space. This is also a problem if you are using space caching since
we don't ever calculate bytes_super for the block groups. So instead everytime
we read a block group call exclude_super_stripes, which calculates the
bytes_super for the block group so it can be left out of the space_info. Then
whenever caching completes we just call free_excluded_extents so that the super
excluded extents are freed up. Also if we are unmounting and we hit any block
groups that haven't been cached we still need to call free_excluded_extents to
make sure things are cleaned up properly. Thanks,
Reported-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we're cleaning up the tree log we need to be able to remove free space from
the block group. The problem is if that free space spans bitmaps we would not
find the space since we're looking for too many bytes. So make sure the amount
of bytes we search for is limited to either the number of bytes we want, or the
number of bytes left in the bitmap. This was tested by a user who was hitting
the BUG() after search_bitmap. With this patch he can now mount his fs.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
The error check of btrfs_start_transaction() is added, and the mistake
of the error check on several places is corrected.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Because NULL is returned when the memory allocation fails,
it is checked whether it is NULL.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This one isn't really an uninit variable, but for pretty
obscure reasons. Let's make it clearly correct.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_sync_log returns -EAGAIN when we need full transaction commits
instead of small log commits, but sometimes we were dropping the return
value.
In practice, we check for this a few different ways, but this is still a
bug that can leave off full log commits when we really need them.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Xfstests 224 will just sit there and spin for ever until eventually we give up
flushing delalloc and exit. On my box this took several hours. I could not
interrupt this process either, even though we use INTERRUPTIBLE. So do 2 things
1) Keep us from looping over and over again without reclaiming anything
2) If we get interrupted exit the loop
I tested this and the test now exits in a reasonable amount of time, and can be
interrupted with ctrl+c. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Instead of doing a BUG_ON(1) in prepare_pages if grab_cache_page() fails, just
loop through the pages we've already grabbed and unlock and release them, then
return -ENOMEM like we should. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Got a report of a box panicing because we got a NULL eb in read_extent_buffer.
His fs was borked and btrfs_search_path returned EIO, but we don't check for
errors so the box paniced. Yes I know this will just make something higher up
the stack panic, but that's a problem for future Josef. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We call use_block_rsv right before we make an allocation in order to make sure
we have enough space. Now normally people have called btrfs_start_transaction()
with the appropriate amount of space that we need, so we just use some of that
pre-reserved space and move along happily. The problem is where people use
btrfs_join_transaction(), which doesn't actually reserve any space. So we try
and reserve space here, but we cannot flush delalloc, so this forces us to
return -ENOSPC when in reality we have plenty of space. The most common symptom
is seeing a bunch of "couldn't dirty inode" messages in syslog. With
xfstests 224 we end up falling back to start_transaction and then doing all the
flush delalloc stuff which causes to hang for a very long time.
So instead steal from the global reserve, which is what this is meant for
anyway. With this patch and the other 2 I have sent xfstests 224 now passes
successfully. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we do btrfs_block_rsv_release, if global_block_rsv is not full we will
release all the extra bytes to global_block_rsv, even if it's only a little
short of the amount of space that we need to reserve. This causes us to starve
ourselves of reservable space during the transaction which will force us to
shrink delalloc bytes and commit the transaction more often than we should. So
instead just add the amount of bytes we need to add to the global reserve so
reserved == size, and then add the rest back into the space_info for general
use. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When running xfstests 224 I kept getting ENOSPC when trying to remove the files,
and this is because we were returning ret from check_path_shared while it was
uninitalized, which isn't right. Fix this to return 0 properly, and now
xfstests 224 doesn't freak out when it tries to clean itself up. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_start_ioctl_transaction() returns ERR_PTR(), not NULL.
So, it is necessary to use IS_ERR() to check the return value.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The error check of btrfs_join_transaction()/btrfs_join_transaction_nolock()
is added, and the mistake of the error check in several places is
corrected.
For more stable Btrfs, I think that we should reduce BUG_ON().
But, I think that long time is necessary for this.
So, I propose this patch as a short-term solution.
With this patch:
- To more stable Btrfs, the part that should be corrected is clarified.
- The panic isn't done by the NULL pointer reference etc. (even if
BUG_ON() is increased temporarily)
- The error code is returned in the place where the error can be easily
returned.
As a long-term plan:
- BUG_ON() is reduced by using the forced-readonly framework, etc.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
After the conditional that precedes the following code, inode may be an
ERR_PTR value. This can eg result from a memory allocation failure via the
call to btrfs_iget, and thus does not imply that root is different than
sub_root. Thus, an IS_ERR check is added to ensure that there is no
dereference of inode in this case.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
identifier f;
@@
f(...) { ... return ERR_PTR(...); }
@@
identifier r.f, fld;
expression x;
statement S1,S2;
@@
x = f(...)
... when != IS_ERR(x)
(
if (IS_ERR(x) ||...) S1 else S2
|
*x->fld
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
To make btrfs more stable, add several missing necessary memory allocation
checks, and when no memory, return proper errno.
We've checked that some of those -ENOMEM errors will be returned to
userspace, and some will be catched by BUG_ON() in the upper callers,
and none will be ignored silently.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_submit_compressed_read() is lack of memory allocation checks and
corresponding error route.
After this fix, if it comes to "no memory" case, errno will be returned
to userland step by step, and tell users this operation cannot go on.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Suppose:
- the source extent is: [0, 100]
- the src offset is 10
- the clone length is 90
- the dest offset is 0
This statement:
new_key.offset = key.offset + destoff - off
will produce such an extent for the dest file:
[ino, BTRFS_EXTENT_DATA_KEY, -10]
, which is obviously wrong.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
fixup, which is allocated when starting page write to fix up the
extent without ORDERED bit set, should be freed after this work
is done.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
We must save and free the original kstrdup()'ed pointer
because strsep() modifies its first argument.
Signed-off-by: Tero Roponen <tero.roponen@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
We missed a memory deallocation in commit 450ba0ea.
If an existing super block is found at mount and there is no
error condition then the pre-allocated tree_root and fs_info
are no not used and are not freeded.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
After returing extents from a cluster to the block group, some
extents in the block group may be mergeable.
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
When adding a new extent, we'll firstly see if we can merge
this extent to the left or/and right extent. Extract this as
a helper try_merge_free_space().
As a side effect, we fix a small bug that if the new extent
has non-bitmap left entry but is unmergeble, we'll directly
link the extent without trying to drop it into bitmap.
This also prepares for the next patch.
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
When allocating extent entry from a cluster, we should update
the free_space and free_extents fields of the block group.
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
If there's no more free space in a bitmap, we should free it.
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Remove some duplicated code.
This prepares for the next patch.
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
If a block group is smaller than 1GB, the extent entry threadhold
calculation will always set the threshold to 0.
So as free space gets fragmented, btrfs will switch to use bitmap
to manage free space, but then will never switch back to extents
due to this bug.
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits)
Btrfs: forced readonly mounts on errors
btrfs: Require CAP_SYS_ADMIN for filesystem rebalance
Btrfs: don't warn if we get ENOSPC in btrfs_block_rsv_check
btrfs: Fix memory leak in btrfs_read_fs_root_no_radix()
btrfs: check NULL or not
btrfs: Don't pass NULL ptr to func that may deref it.
btrfs: mount failure return value fix
btrfs: Mem leak in btrfs_get_acl()
btrfs: fix wrong free space information of btrfs
btrfs: make the chunk allocator utilize the devices better
btrfs: restructure find_free_dev_extent()
btrfs: fix wrong calculation of stripe size
btrfs: try to reclaim some space when chunk allocation fails
btrfs: fix wrong data space statistics
fs/btrfs: Fix build of ctree
Btrfs: fix off by one while setting block groups readonly
Btrfs: Add BTRFS_IOC_SUBVOL_GETFLAGS/SETFLAGS ioctls
Btrfs: Add readonly snapshots support
Btrfs: Refactor btrfs_ioctl_snap_create()
btrfs: Extract duplicate decompress code
...
This patch comes from "Forced readonly mounts on errors" ideas.
As we know, this is the first step in being more fault tolerant of disk
corruptions instead of just using BUG() statements.
The major content:
- add a framework for generating errors that should result in filesystems
going readonly.
- keep FS state in disk super block.
- make sure that all of resource will be freed and released at umount time.
- make sure that fter FS is forced readonly on error, there will be no more
disk change before FS is corrected. For this, we should stop write operation.
After this patch is applied, the conversion from BUG() to such a framework can
happen incrementally.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Currently all filesystems except XFS implement fallocate asynchronously,
while XFS forced a commit. Both of these are suboptimal - in case of O_SYNC
I/O we really want our allocation on disk, especially for the !KEEP_SIZE
case where we actually grow the file with user-visible zeroes. On the
other hand always commiting the transaction is a bad idea for fast-path
uses of fallocate like for example in recent Samba versions. Given
that block allocation is a data plane operation anyway change it from
an inode operation to a file operation so that we have the file structure
available that lets us check for O_SYNC.
This also includes moving the code around for a few of the filesystems,
and remove the already unnedded S_ISDIR checks given that we only wire
up fallocate for regular files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of various home grown checks that might need updates for new
flags just check for any bit outside the mask of the features supported
by the filesystem. This makes the check future proof for any newly
added flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix the build failure in some configurations:
CC [M] fs/btrfs/ctree.o
In file included from fs/btrfs/ctree.c:21:0:
fs/btrfs/ctree.h:1003:17: error: field 'super_kobj' has incomplete type
fs/btrfs/ctree.h:1074:17: error: field 'root_kobj' has incomplete type
make[2]: *** [fs/btrfs/ctree.o] Error 1
make[1]: *** [fs/btrfs] Error 2
make: *** [fs] Error 2
caused by commit 57cc7215b7 ("headers: kobject.h redux")
We need to include kobject.h here.
Reported-by: Jeff Garzik <jeff@garzik.org>
Fix-suggested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Filesystem rebalancing (BTRFS_IOC_BALANCE) affects the entire
filesystem and may run uninterruptibly for a long time. This does not
seem to be something that an unprivileged user should be able to do.
Reported-by: Aron Xu <happyaron.xu@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we run low on space we could get a bunch of warnings out of
btrfs_block_rsv_check, but this is mostly just called via the transaction code
to see if we need to end the transaction, it expects to see failures, so let's
not WARN and freak everybody out for no reason. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In btrfs_read_fs_root_no_radix(), 'root' is not freed if
btrfs_search_slot() returns error.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Hi,
In fs/btrfs/inode.c::fixup_tree_root_location() we have this code:
...
if (!path) {
err = -ENOMEM;
goto out;
}
...
out:
btrfs_free_path(path);
return err;
btrfs_free_path() passes its argument on to other functions and some of
them end up dereferencing the pointer.
In the code above that pointer is clearly NULL, so btrfs_free_path() will
eventually cause a NULL dereference.
There are many ways to cut this cake (fix the bug). The one I chose was to
make btrfs_free_path() deal gracefully with NULL pointers. If you
disagree, feel free to come up with an alternative patch.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I happened to pass swap partition as root partition in cmdline,
then kernel panic and tell me about "Cannot open root device".
It is not correct, in fact it is a fs type mismatch instead of 'no device'.
Eventually I found btrfs mounting failed with -EIO, it should be -EINVAL.
The logic in init/do_mounts.c:
for (p = fs_names; *p; p += strlen(p)+1) {
int err = do_mount_root(name, p, flags, root_mount_data);
switch (err) {
case 0:
goto out;
case -EACCES:
flags |= MS_RDONLY;
goto retry;
case -EINVAL:
continue;
}
print "Cannot open root device"
panic
}
SO fs type after btrfs will have no chance to mount
Here fix the return value as -EINVAL
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
It seems to me that we leak the memory allocated to 'value' in
btrfs_get_acl() if the call to posix_acl_from_xattr() fails.
Here's a patch that attempts to correct that problem.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we store data by raid profile in btrfs with two or more different size
disks, df command shows there is some free space in the filesystem, but the
user can not write any data in fact, df command shows the wrong free space
information of btrfs.
# mkfs.btrfs -d raid1 /dev/sda9 /dev/sda10
# btrfs-show
Label: none uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64
Total devices 2 FS bytes used 28.00KB
devid 1 size 5.01GB used 2.03GB path /dev/sda9
devid 2 size 10.00GB used 2.01GB path /dev/sda10
# btrfs device scan /dev/sda9 /dev/sda10
# mount /dev/sda9 /mnt
# dd if=/dev/zero of=tmpfile0 bs=4K count=9999999999
(fill the filesystem)
# sync
# df -TH
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda9 btrfs 17G 8.6G 5.4G 62% /mnt
# btrfs-show
Label: none uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64
Total devices 2 FS bytes used 3.99GB
devid 1 size 5.01GB used 5.01GB path /dev/sda9
devid 2 size 10.00GB used 4.99GB path /dev/sda10
It is because btrfs cannot allocate chunks when one of the pairing disks has
no space, the free space on the other disks can not be used for ever, and should
be subtracted from the total space, but btrfs doesn't subtract this space from
the total. It is strange to the user.
This patch fixes it by calcing the free space that can be used to allocate
chunks.
Implementation:
1. get all the devices free space, and align them by stripe length.
2. sort the devices by the free space.
3. check the free space of the devices,
3.1. if it is not zero, and then check the number of the devices that has
more free space than this device,
if the number of the devices is beyond the min stripe number, the free
space can be used, and add into total free space.
if the number of the devices is below the min stripe number, we can not
use the free space, the check ends.
3.2. if the free space is zero, check the next devices, goto 3.1
This implementation is just likely fake chunk allocation.
After appling this patch, df can show correct space information:
# df -TH
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda9 btrfs 17G 8.6G 0 100% /mnt
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With this patch, we change the handling method when we can not get enough free
extents with default size.
Implementation:
1. Look up the suitable free extent on each device and keep the search result.
If not find a suitable free extent, keep the max free extent
2. If we get enough suitable free extents with default size, chunk allocation
succeeds.
3. If we can not get enough free extents, but the number of the extent with
default size is >= min_stripes, we just change the mapping information
(reduce the number of stripes in the extent map), and chunk allocation
succeeds.
4. If the number of the extent with default size is < min_stripes, sort the
devices by its max free extent's size descending
5. Use the size of the max free extent on the (num_stripes - 1)th device as the
stripe size to allocate the device space
By this way, the chunk allocator can allocate chunks as large as possible when
the devices' space is not enough and make full use of the devices.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
- make it return the start position and length of the max free space when it can
not find a suitable free space.
- make it more readability
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There are two tiny problem:
- One is When we check the chunk size is greater than the max chunk size or not,
we should take mirrors into account, but the original code didn't.
- The other is btrfs shouldn't use the size of the residual free space as the
length of of a dup chunk when doing chunk allocation. It is because the device
space that a dup chunk needs is twice as large as the chunk size, if we use
the size of the residual free space as the length of a dup chunk, we can not
get enough free space. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We cannot write data into files when when there is tiny space in the filesystem.
Reproduce steps:
# mkfs.btrfs /dev/sda1
# mount /dev/sda1 /mnt
# dd if=/dev/zero of=/mnt/tmpfile0 bs=4K count=1
# dd if=/dev/zero of=/mnt/tmpfile1 bs=4K count=99999999999999
(fill the filesystem)
# umount /mnt
# mount /dev/sda1 /mnt
# rm -f /mnt/tmpfile0
# dd if=/dev/zero of=/mnt/tmpfile0 bs=4K count=1
(failed with nospec)
But if we do the last step again, we can write data successfully. The reason of
the problem is that btrfs didn't try to commit the current transaction and
reclaim some space when chunk allocation failed.
This patch fixes it by committing the current transaction to reclaim some
space when chunk allocation fails.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef has implemented mixed data/metadata chunks, we must add those chunks'
space just like data chunks.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
CC [M] fs/btrfs/ctree.o
In file included from fs/btrfs/ctree.c:21:0:
fs/btrfs/ctree.h:1003:17: error: field <91>super_kobj<92> has incomplete type
fs/btrfs/ctree.h:1074:17: error: field <91>root_kobj<92> has incomplete type
make[2]: *** [fs/btrfs/ctree.o] Error 1
make[1]: *** [fs/btrfs] Error 2
make: *** [fs] Error 2
We need to include kobject.h here.
Reported-by: Jeff Garzik <jeff@garzik.org>
Fix-suggested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
Btrfs doesn't have the ability to punch holes yet, so make sure we return
EOPNOTSUPP if we try to use hole punching through fallocate. This support can
be added later. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This simple implementation just checks for no ACLs on the inode, and
if so, then the rcu-walk may proceed, otherwise fail it.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Change d_delete from a dentry deletion notification to a dentry caching
advise, more like ->drop_inode. Require it to be constant and idempotent,
and not take d_lock. This is how all existing filesystems use the callback
anyway.
This makes fine grained dentry locking of dput and dentry lru scanning
much simpler.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
When we read in block groups, we'll set non-redundant groups
readonly if we find a raid1, DUP or raid10 group. But the
ro code has an off by one bug in the math around testing to
make sure out accounting doesn't go wrong.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This allows us to set a snapshot or a subvolume readonly or writable
on the fly.
Usage:
Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and then
call ioctl(BTRFS_IOCTL_SUBVOL_SETFLAGS);
Changelog for v3:
- Change to pass __u64 as ioctl parameter.
Changelog for v2:
- Add _GETFLAGS ioctl.
- Check if the passed fd is the root of a subvolume.
- Change the name from _SNAP_SETFLAGS to _SUBVOL_SETFLAGS.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Usage:
Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and call
ioctl(BTRFS_I0CTL_SNAP_CREATE_V2).
Implementation:
- Set readonly bit of btrfs_root_item->flags.
- Add readonly checks in btrfs_permission (inode_permission),
btrfs_setattr, btrfs_set/remove_xattr and some ioctls.
Changelog for v3:
- Eliminate btrfs_root->readonly, but check btrfs_root->root_item.flags.
- Rename BTRFS_ROOT_SNAP_RDONLY to BTRFS_ROOT_SUBVOL_RDONLY.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Update defrag ioctl, so one can choose lzo or zlib when turning
on compression in defrag operation.
Changelog:
v1 -> v2
- Add incompability flag.
- Fix to check invalid compress type.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Lzo is a much faster compression algorithm than gzib, so would allow
more users to enable transparent compression, and some users can
choose from compression ratio and speed for different applications
Usage:
# mount -t btrfs -o compress[=<zlib,lzo>] dev /mnt
or
# mount -t btrfs -o compress-force[=<zlib,lzo>] dev /mnt
"-o compress" without argument is still allowed for compatability.
Compatibility:
If we mount a filesystem with lzo compression, it will not be able be
mounted in old kernels. One reason is, otherwise btrfs will directly
dump compressed data, which sits in inline extent, to user.
Performance:
The test copied a linux source tarball (~400M) from an ext4 partition
to the btrfs partition, and then extracted it.
(time in second)
lzo zlib nocompress
copy: 10.6 21.7 14.9
extract: 70.1 94.4 66.6
(data size in MB)
lzo zlib nocompress
copy: 185.87 108.69 394.49
extract: 193.80 132.36 381.21
Changelog:
v1 -> v2:
- Select LZO_COMPRESS and LZO_DECOMPRESS in btrfs Kconfig.
- Add incompability flag.
- Fix error handling in compress code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Make the code aware of compression type, instead of always assuming
zlib compression.
Also make the zlib workspace function as common code for all
compression types.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Return failure if alloc_page() fails to allocate memory,
and the upper code will just give up compression.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: prevent RAID level downgrades when space is low
Btrfs: account for missing devices in RAID allocation profiles
Btrfs: EIO when we fail to read tree roots
Btrfs: fix compiler warnings
Btrfs: Make async snapshot ioctl more generic
Btrfs: pwrite blocked when writing from the mmaped buffer of the same page
Btrfs: Fix a crash when mounting a subvolume
Btrfs: fix sync subvol/snapshot creation
Btrfs: Fix page leak in compressed writeback path
Btrfs: do not BUG if we fail to remove the orphan item for dead snapshots
Btrfs: fixup return code for btrfs_del_orphan_item
Btrfs: do not do fast caching if we are allocating blocks for tree_root
Btrfs: deal with space cache errors better
Btrfs: fix use after free in O_DIRECT
The extent allocator has code that allows us to fill
allocations from any available block group, even if it doesn't
match the raid level we've requested.
This was put in because adding a new drive to a filesystem
made with the default mkfs options actually upgrades the metadata from
single spindle dup to full RAID1.
But, the code also allows us to allocate from a raid0 chunk when we
really want a raid1 or raid10 chunk. This can cause big trouble because
mkfs creates a small (4MB) raid0 chunk for data and metadata which then
goes unused for raid1/raid10 installs.
The allocator will happily wander in and allocate from that chunk when
things get tight, which is not correct.
The fix here is to make sure that we provide duplication when the
caller has asked for it. It does all the dups to be any raid level,
which preserves the dup->raid1 upgrade abilities.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we mount in RAID degraded mode without adding a new device to
replace the failed one, we can end up using the wrong RAID flags for
allocations.
This results in strange combinations of block groups (raid1 in a raid10
filesystem) and corruptions when we try to allocate blocks from single
spindle chunks on drives that are actually missing.
The first device has two small 4MB chunks in it that mkfs creates and
these are usually unused in a raid1 or raid10 setup. But, in -o degraded,
the allocator will fall back to these because the mask of desired raid groups
isn't correct.
The fix here is to count the missing devices as we build up the list
of devices in the system. This count is used when picking the
raid level to make sure we continue using the same levels that were
in place before we lost a drive.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we just get a plain IO error when we read tree roots, the code
wasn't properly sending that error up the chain. This allowed mounts to
continue when they should failed, and allowed operations
on partially setup root structs. The end result was usually oopsen
on spinlocks that hadn't been spun up correctly.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
... regarding an unused function when !MIGRATION, and regarding a
printk() format string vs argument mismatch.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we had reserved some bytes in struct btrfs_ioctl_vol_args, we
wouldn't have to create a new structure for async snapshot creation.
Here we convert async snapshot ioctl to use a more generic ABI, as
we'll add more ioctls for snapshots/subvolumes in the future, readonly
snapshots for example.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This problem is found in meego testing:
http://bugs.meego.com/show_bug.cgi?id=6672
A file in btrfs is mmaped and the mmaped buffer is passed to pwrite to write to the same page
of the same file. In btrfs_file_aio_write(), the pages is locked by prepare_pages(). So when
btrfs_copy_from_user() is called, page fault happens and the same page needs to be locked again
in filemap_fault(). The fix is to move iov_iter_fault_in_readable() before prepage_pages() to make page
fault happen before pages are locked. And also disable page fault in critical region in
btrfs_copy_from_user().
Reviewed-by: Yan, Zheng<zheng.z.yan@intel.com>
Signed-off-by: Zhong, Xin <xin.zhong@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We should drop dentry before deactivating the superblock, otherwise
we can hit this bug:
BUG: Dentry f349a690{i=100,n=/} still in use (1) [unmount of btrfs loop1]
...
Steps to reproduce the bug:
# mount /dev/loop1 /mnt
# mkdir save
# btrfs subvolume snapshot /mnt save/snap1
# umount /mnt
# mount -o subvol=save/snap1 /dev/loop1 /mnt
(crash)
Reported-by: Michael Niederle <mniederle@gmx.at>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We were incorrectly taking the async path even for the sync ioctls by
passing in &transid unconditionally.
There's ample room for further cleanup here, but this keeps the fix simple.
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
"start + num_bytes >= actual_end" can happen when compressed page writeback races
with file truncation. In that case we need unlock and release pages past the end
of file.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Not being able to delete an orphan item isn't a horrible thing. The worst that
happens is the next time around we try and do the orphan cleanup and we can't
find the referenced object and just delete the item and move on.
Signed-off-by: Josef Bacik <josef@redhat.com>
If the orphan item doesn't exist, we return 1, which doesn't make any sense to
the callers. Instead return -ENOENT if we didn't find the item. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Since the fast caching uses normal tree locking, we can possibly deadlock if we
get to the caching via a btrfs_search_slot() on the tree_root. So just check to
see if the root we are on is the tree root, and just don't do the fast caching.
Reported-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josef Bacik <josef@redhat.com>
Currently if the space cache inode generation number doesn't match the
generation number in the space cache header we will just fail to load the space
cache, but we won't mark the space cache as an error, so we'll keep getting that
error each time somebody tries to cache that block group until we actually clear
the thing. Fix this by marking the space cache as having an error so we only
get the message once. This patch also makes it so that we don't try and setup
space cache for a block group that isn't cached, since we won't be able to write
it out anyway. None of these problems are actual problems, they are just
annoying and sub-optimal. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This fixes a bug where we use dip after we have freed it. Instead just use the
file_offset that was passed to the function. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits)
Btrfs: don't use migrate page without CONFIG_MIGRATION
Btrfs: deal with DIO bios that span more than one ordered extent
Btrfs: setup blank root and fs_info for mount time
Btrfs: fix fiemap
Btrfs - fix race between btrfs_get_sb() and umount
Btrfs: update inode ctime when using links
Btrfs: make sure new inode size is ok in fallocate
Btrfs: fix typo in fallocate to make it honor actual size
Btrfs: avoid NULL pointer deref in try_release_extent_buffer
Btrfs: make btrfs_add_nondir take parent inode as an argument
Btrfs: hold i_mutex when calling btrfs_log_dentry_safe
Btrfs: use dget_parent where we can UPDATED
Btrfs: fix more ESTALE problems with NFS
Btrfs: handle NFS lookups properly
btrfs: make 1-bit signed fileds unsigned
btrfs: Show device attr correctly for symlinks
btrfs: Set file size correctly in file clone
btrfs: Check if dest_offset is block-size aligned before cloning file
Btrfs: handle the space_cache option properly
btrfs: Fix early enospc because 'unused' calculated with wrong sign.
...
The new DIO bio splitting code has problems when the bio
spans more than one ordered extent. This will happen as the
generic DIO code merges our get_blocks calls together into
a bigger single bio.
This fixes things by walking forward in the ordered extent
code finding all the overlapping ordered extents and completing them
all at once.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There is a problem with how we use sget, it searches through the list of supers
attached to the fs_type looking for a super with the same fs_devices as what
we're trying to mount. This depends on sb->s_fs_info being filled, but we don't
fill that in until we get to btrfs_fill_super, so we could hit supers on the
fs_type super list that have a null s_fs_info. In order to fix that we need to
go ahead and setup a blank root with a blank fs_info to hold fs_devices, that
way our test will work out right and then we can set s_fs_info in
btrfs_set_super, and then open_ctree will simply use our pre-allocated root and
fs_info when setting everything up. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There are two big problems currently with FIEMAP
1) We return extents for holes. This isn't supposed to happen, we just don't
return extents for holes and then userspace interprets the lack of an extent as
a hole.
2) We sometimes don't set FIEMAP_EXTENT_LAST properly. This is because we wait
to see a EXTENT_FLAG_VACANCY flag on the em, but this won't happen if say we ask
fiemap to map up to the last extent in a file, and there is nothing but holes up
to the i_size. To fix this we need to lookup the last extent in this file and
save the logical offset, so if we happen to try and map that extent we can be
sure to set FIEMAP_EXTENT_LAST.
With this patch we now pass xfstest 225, which we never have before.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When mounting a btrfs file system btrfs_test_super() may attempt to
use sb->s_fs_info, the btrfs root, of a super block that is going away
and that has had the btrfs root set to NULL in its ->put_super(). But
if the super block is going away it cannot be an existing super block
so we can return false in this case.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Currently we fail xfstest 236 because we're not updating the inode ctime on
link. This is a simple fix, and makes it so we pass 236 now.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We have been failing xfstest 228 forever, because we don't check to make sure
the new inode size is acceptable as far as RLIMIT is concerned. Just check to
make sure it's ok to create a inode with this new size and error out if not.
With this patch we now pass 228.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There is a typo in __btrfs_prealloc_file_range() where we set the i_size to
actual_len/cur_offset, and then just set it to cur_offset again, and do the same
with btrfs_ordered_update_i_size(). This fixes it back to keeping i_size in a
local variable and then updating i_size properly. Tested this with
xfs_io -F -f -c "falloc 0 1" -c "pwrite 0 1" foo
stat'ing foo gives us a size of 1 instead of 4096 like it was. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Everybody who calls btrfs_add_nondir just passes in the dentry of the new file
and then dereference dentry->d_parent->d_inode, but everybody who calls
btrfs_add_nondir() are already passed the parent's inode. So instead of
dereferencing dentry->d_parent, just make btrfs_add_nondir take the dir inode as
an argument and pass that along so we don't have to worry about d_parent.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Since we walk up the path logging all of the parts of the inode's path, we need
to hold i_mutex to make sure that the inode is not renamed while we're logging
everything. btrfs_log_dentry_safe does dget_parent and all of that jazz, but we
may get unexpected results if the rename changes the inode's location while
we're higher up the path logging those dentries, so do this for safety reasons.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There are lots of places where we do dentry->d_parent->d_inode without holding
the dentry->d_lock. This could cause problems with rename. So instead we need
to use dget_parent() and hold the reference to the parent as long as we are
going to use it's inode and then dput it at the end.
Signed-off-by: Josef Bacik <josef@redhat.com>
Cc: raven@themaw.net
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When creating new inodes we don't setup inode->i_generation. So if we generate
an fh with a newly created inode we save the generation of 0, but if we flush
the inode to disk and have to read it back when getting the inode on the server
we'll have the right i_generation, so gens wont match and we get ESTALE. This
patch properly sets inode->i_generation when we create the new inode and now I'm
no longer getting ESTALE. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
People kept reporting NFS issues, specifically getting ESTALE alot. I figured
out how to reproduce the problem
SERVER
mkfs.btrfs /dev/sda1
mount /dev/sda1 /mnt/btrfs-test
<add /mnt/btrfs-test to /etc/exports>
btrfs subvol create /mnt/btrfs-test/foo
service nfs start
CLIENT
mount server:/mnt/btrfs /mnt/test
cd /mnt/test/foo
ls
SERVER
echo 3 > /proc/sys/vm/drop_caches
CLIENT
ls <-- get an ESTALE here
This is because the standard way to lookup a name in nfsd is to use readdir, and
what it does is do a readdir on the parent directory looking for the inode of
the child. So in this case the parent being / and the child being foo. Well
subvols all have the same inode number, so doing a readdir of / looking for
inode 256 will return '.', which obviously doesn't match foo. So instead we
need to have our own .get_name so that we can find the right name.
Our .get_name will either lookup the inode backref or the root backref,
whichever we're looking for, and return the name we find. Running the above
reproducer with this patch results in everything acting the way its supposed to.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Set src_offset = 0, src_length = 20K, dest_offset = 20K. And the
original filesize of the dest file 'file2' is 30K:
# ls -l /mnt/file2
-rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2
Now clone file1 to file2, the dest file should be 40K, but it
still shows 30K:
# ls -l /mnt/file2
-rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We've done the check for src_offset and src_length, and We should
also check dest_offset, otherwise we'll corrupt the destination
file:
(After cloning file1 to file2 with unaligned dest_offset)
# cat /mnt/file2
cat: /mnt/file2: Input/output error
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When I added the clear_cache option I screwed up and took the break out of
the space_cache case statement, so whenever you mount with space_cache you also
get clear_cache, which does you no good if you say set space_cache in fstab so
it always gets set. This patch adds the break back in properly.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
'unused' calculated with wrong sign in reserve_metadata_bytes().
This might have lead to unwanted over-reservations.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
extent_bio_alloc() and compressed_bio_alloc() are similar, cleanup
similar source code.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
bio_endio() will free dip and dip->csums, so dip and dip->csums twice will
be freed twice. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Migrate page will directly call the btrfs btree writepage function,
which isn't actually allowed.
Our writepage assumes that you have locked the extent_buffer and
flagged the block as written. Without doing these steps, we can
corrupt metadata blocks.
A later commit will remove the btree writepage function since
it is really only safely used internally by btrfs. We
use writepages for everything else.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().
blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.
All users are converted. Most conversions are mechanical and don't
introduce any behavior difference. There are several exceptions.
* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
reason to OR it explicitly on blkdev_put().
* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
sb->s_mode.
* With the above changes, sb->s_mode now always should contain
FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect
errors.
The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.
* blkdev_get/put() are the primary open and close functions.
* bd_claim/release() deal with exclusive open.
* open/close_bdev_exclusive() are combination of open and claim and
the other way around, respectively.
* bd_link/unlink_disk_holder() to create and remove holder/slave
symlinks.
* open_by_devnum() wraps bdget() + blkdev_get().
The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access. Reorganize the interface such that,
* blkdev_get() is extended to include exclusive access management.
@holder argument is added and, if is @FMODE_EXCL specified, it will
gain exclusive access atomically w.r.t. other exclusive accesses.
* blkdev_put() is similarly extended. It now takes @mode argument and
if @FMODE_EXCL is set, it releases an exclusive access. Also, when
the last exclusive claim is released, the holder/slave symlinks are
removed automatically.
* bd_claim/release() and close_bdev_exclusive() are no longer
necessary and either made static or removed.
* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
is no longer necessary and removed.
* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
and blkdev_get(). It also has an unexpected extra bdev_read_only()
test which probably should be moved into blkdev_get().
* open_by_devnum() is modified to take @holder argument and pass it to
blkdev_get().
Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should). This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.
open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features. Well, let's leave them for another day.
Most conversions are straight-forward. drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
In the failure path of __btrfs_open_devices(), close_bdev_exclusive()
is called with @flags which doesn't match the one used during
open_bdev_exclusive(). Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Mason <chris.mason@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (39 commits)
Btrfs: deal with errors from updating the tree log
Btrfs: allow subvol deletion by unprivileged user with -o user_subvol_rm_allowed
Btrfs: make SNAP_DESTROY async
Btrfs: add SNAP_CREATE_ASYNC ioctl
Btrfs: add START_SYNC, WAIT_SYNC ioctls
Btrfs: async transaction commit
Btrfs: fix deadlock in btrfs_commit_transaction
Btrfs: fix lockdep warning on clone ioctl
Btrfs: fix clone ioctl where range is adjacent to extent
Btrfs: fix delalloc checks in clone ioctl
Btrfs: drop unused variable in block_alloc_rsv
Btrfs: cleanup warnings from gcc 4.6 (nonbugs)
Btrfs: Fix variables set but not read (bugs found by gcc 4.6)
Btrfs: Use ERR_CAST helpers
Btrfs: use memdup_user helpers
Btrfs: fix raid code for removing missing drives
Btrfs: Switch the extent buffer rbtree into a radix tree
Btrfs: restructure try_release_extent_buffer()
Btrfs: use the flusher threads for delalloc throttling
Btrfs: tune the chunk allocation to 5% of the FS as metadata
...
Fix up trivial conflicts in fs/btrfs/super.c and fs/fs-writeback.c, and
remove use of INIT_RCU_HEAD in fs/btrfs/extent_io.c (that init macro was
useless and removed in commit 5e8067adfd: "rcu head remove init")
During unlink we remove any references to the inode from
the tree log. It can return -ENOENT and other errors,
and this changes the unlink code to deal with it.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Add a mount option user_subvol_rm_allowed that allows users to delete a
(potentially non-empty!) subvol when they would otherwise we allowed to do
an rmdir(2). We duplicate the may_delete() checks from the core VFS code
to implement identical security checks (minus the directory size check).
We additionally require that the user has write+exec permission on the
subvol root inode.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There is no reason to force an immediate commit when deleting a snapshot.
Users have some expectation that space from a deleted snapshot be freed
immediately, but even if we do commit the reclaim is a background process.
If users _do_ want the deletion to be durable, they can call 'sync'.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Create a snap without waiting for it to commit to disk. The ioctl is
ordered such that subsequent operations will not be contained by the
created snapshot, and the commit is initiated, but the ioctl does not
wait for the snapshot to commit to disk.
We return the specific transid to userspace so that an application can wait
for this specific snapshot creation to commit via the WAIT_SYNC ioctl.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
START_SYNC will start a sync/commit, but not wait for it to
complete. Any modification started after the ioctl returns is
guaranteed not to be included in the commit. If a non-NULL
pointer is passed, the transaction id will be returned to
userspace.
WAIT_SYNC will wait for any in-progress commit to complete. If a
transaction id is specified, the ioctl will block and then
return (success) when the specified transaction has committed.
If it has already committed when we call the ioctl, it returns
immediately. If the specified transaction doesn't exist, it
returns EINVAL.
If no transaction id is specified, WAIT_SYNC will wait for the
currently committing transaction to finish it's commit to disk.
If there is no currently committing transaction, it returns
success.
These ioctls are useful for applications which want to impose an
ordering on when fs modifications reach disk, but do not want to
wait for the full (slow) commit process to do so.
Picky callers can take the transid returned by START_SYNC and
feed it to WAIT_SYNC, and be certain to wait only as long as
necessary for the transaction _they_ started to reach disk.
Sloppy callers can START_SYNC and WAIT_SYNC without a transid,
and provided they didn't wait too long between the calls, they
will get the same result. However, if a second commit starts
before they call WAIT_SYNC, they may end up waiting longer for
it to commit as well. Even so, a START_SYNC+WAIT_SYNC still
guarantees that any operation completed before the START_SYNC
reaches disk.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Add support for an async transaction commit that is ordered such that any
subsequent operations will join the following transaction, but does not
wait until the current commit is fully on disk. This avoids much of the
latency associated with the btrfs_commit_transaction for callers concerned
with serialization and not safety.
The wait_for_unblock flag controls whether we wait for the 'middle' portion
of commit_transaction to complete, which is necessary if the caller expects
some of the modifications contained in the commit to be available (this is
the case for subvol/snapshot creation).
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We calculate timeout (either 1 or MAX_SCHEDULE_TIMEOUT) based on whether
num_writers > 1 or should_grow at the top of the loop. Then, much much
later, we wait for that timeout if either num_writers or should_grow is
true. However, it's possible for a racing process (calling
btrfs_end_transaction()) to decrement num_writers such that we wait
forever instead of for 1.
Fix this by deciding how long to wait when we wait. Include a smp_mb()
before checking if the waitqueue is active to ensure the num_writers
is visible.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I'm no lockdep expert, but this appears to make the lockdep warning go
away for the i_mutex locking in the clone ioctl.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We had an edge case issue where the requested range was just
following an existing extent. Instead of skipping to the next
extent, we used the previous one which lead to having zero
sized extents.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The lookup_first_ordered_extent() was done on the wrong inode, and the
->delalloc_bytes test was wrong, as the following
btrfs_wait_ordered_range() would only invoke a range write and wouldn't
write the entire file data range. Also, a bad parameter was passed to
btrfs_wait_ordered_range().
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
These are all the cases where a variable is set, but not read which are
not bugs as far as I can see, but simply leftovers.
Still needs more review.
Found by gcc 4.6's new warnings
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
These are all the cases where a variable is set, but not
read which are really bugs.
- Couple of incorrect error handling fixed.
- One incorrect use of a allocation policy
- Some other things
Still needs more review.
Found by gcc 4.6's new warnings.
[akpm@linux-foundation.org: fix build. Might have been bitrot]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T x;
identifier f;
@@
T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
...+> }
@@
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Use memdup_user when user data is immediately copied into the
allocated region.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = memdup_user(from,size);
if (
- to==NULL
+ IS_ERR(to)
|| ...) {
<+... when != goto l1;
- -ENOMEM
+ PTR_ERR(to)
...+>
}
- if (copy_from_user(to, from, size) != 0) {
- <+... when != goto l2;
- -EFAULT
- ...+>
- }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When btrfs is mounted in degraded mode, it has some internal structures
to track the missing devices. This missing device is setup as readonly,
but the mapping code can get upset when we try to write to it.
This changes the mapping code to return -EIO instead of oops when we try
to write to the readonly device.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch reduces the CPU time spent in the extent buffer search by using the
radix tree instead of the rbtree and using the rcu lock instead of the spin
lock.
I did a quick test by the benchmark tool[1] and found the patch improve the
file creation/deletion performance problem that I have reported[2].
Before applying this patch:
Create files:
Total files: 50000
Total time: 0.971531
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.366761
Average time: 0.000027
After applying this patch:
Create files:
Total files: 50000
Total time: 0.927455
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.292280
Average time: 0.000026
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
[2] http://marc.info/?l=linux-btrfs&m=128212635122920&w=2
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
restructure try_release_extent_buffer() and write a function to release the
extent buffer. It will be used later.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We have a fairly complex set of loops around walking our list of
delalloc inodes when we find metadata delalloc space running low.
It doesn't work very well, can use large amounts of CPU and doesn't
do very efficient writeback.
This switches us to kick the bdi flusher threads instead. All dirty
data in btrfs is accounted as delalloc data, so this is very similar
in terms of what it writes, but we're able to just kick off the IO
and wait for progress.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
An earlier commit tried to keep us from allocating too many
empty metadata chunks. It was somewhat too restrictive and could
lead to ENOSPC errors on empty filesystems.
This increases the limits to about 5% of the FS size, allowing more
metadata chunks to be preallocated.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When btrfs discovers the generation number in a btree block is
incorrect, it can loop forever without forcing the RAID
code to try a valid mirror, and without returning EIO.
This changes things to properly kick out the EIO.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If you mount -o space_cache, the option will be persistent across mounts, but to
make sure the user knows that they did this, emit a message telling them if they
didn't mount with -o space_cache but the feature is still used.
Signed-off-by: Josef Bacik <josef@redhat.com>
If something goes wrong with the free space cache we need a way to make sure
it's not loaded on mount and that it's cleared for everybody. When you pass the
clear_cache option it will make it so all block groups are setup to be cleared,
which keeps them from being loaded and then they will be truncated when the
transaction is committed. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
There are just a few things that need to be fixed in the kernel to support mixed
data+metadata block groups. Mostly we just need to make sure that if we are
using mixed block groups that we continue to allocate mixed block groups as we
need them. Also we need to make sure __find_space_info will find our space info
if we search for DATA or METADATA only. Tested this with xfstests and it works
nicely. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
With the free space disk caching we can mark the block group as started with the
caching, but we don't have a caching ctl. This can race with anybody else who
tries to get the caching ctl before we cache (this is very hard to do btw). So
instead check to see if cache->caching_ctl is set, and if not return NULL.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This patch actually loads the free space cache if it exists. The only thing
that really changes here is that we need to cache the block group if we're going
to remove an extent from it. Previously we did not do this since the caching
kthread would pick it up. With the on disk cache we don't have this luxury so
we need to make sure we read the on disk cache in first, and then remove the
extent, that way when the extent is unpinned the free space is added to the
block group. This has been tested with all sorts of things.
Signed-off-by: Josef Bacik <josef@redhat.com>
This is a simple bit, just dump the free space cache out to our preallocated
inode when we're writing out dirty block groups. There are a bunch of changes
in inode.c in order to account for special cases. Mostly when we're doing the
writeout we're holding trans_mutex, so we need to use the nolock transacation
functions. Also we can't do asynchronous completions since the async thread
could be blocked on already completed IO waiting for the transaction lock. This
has been tested with xfstests and btrfs filesystem balance, as well as my ENOSPC
tests. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
In order to save free space cache, we need an inode to hold the data, and we
need a special item to point at the right inode for the right block group. So
first, create a special item that will point to the right inode, and the number
of extent entries we will have and the number of bitmaps we will have. We
truncate and pre-allocate space everytime to make sure it's uptodate.
This feature will be turned on as soon as you mount with -o space_cache, however
it is safe to boot into old kernels, they will just generate the cache the old
fashion way. When you boot back into a newer kernel we will notice that we
modified and not the cache and automatically discard the cache.
Signed-off-by: Josef Bacik <josef@redhat.com>
Because btrfs_dirty_inode does a btrfs_join_transaction, it doesn't actually
reserve space. It does this so we can try and dirty the inode quickly without
having to deal with the ENOSPC problems. But if it does get back ENOSPC it
handles it properly. The problem is use_block_rsv does a WARN_ON whenever this
case happens, even tho btrfs_dirty_inode takes it into account and actually
expects to get -ENOSPC if things are particularly tight. So instead just remove
the warning. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
btrfs_commit_transaction will free our trans, but because we pass trans to
shrink_delalloc we could possibly have a use after free situation. So instead
if we commit the transaction, set trans to null and set committed to true so we
don't keep trying to commit a transaction. This fixes a panic I could reproduce
at will. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
xen-blkfront: disable barrier/flush write support
Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
block: remove BLKDEV_IFL_WAIT
aic7xxx_old: removed unused 'req' variable
block: remove the BH_Eopnotsupp flag
block: remove the BLKDEV_IFL_BARRIER flag
block: remove the WRITE_BARRIER flag
swap: do not send discards as barriers
fat: do not send discards as barriers
ext4: do not send discards as barriers
jbd2: replace barriers with explicit flush / FUA usage
jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
jbd: replace barriers with explicit flush / FUA usage
nilfs2: replace barriers with explicit flush / FUA usage
reiserfs: replace barriers with explicit flush / FUA usage
gfs2: replace barriers with explicit flush / FUA usage
btrfs: replace barriers with explicit flush / FUA usage
xfs: replace barriers with explicit flush / FUA usage
block: pass gfp_mask and flags to sb_issue_discard
dm: convey that all flushes are processed as empty
...
If we failed to find the root subvol id, or the subvol=<name>, we would
deactivate the locked super and close the devices. The problem is at this point
we have gotten the SB all setup, which includes setting super_operations, so
when we'd deactiveate the super, we'd do a close_ctree() which closes the
devices, so we'd end up closing the devices twice. So if you do something like
this
mount /dev/sda1 /mnt/test1
mount /dev/sda1 /mnt/test2 -o subvol=xxx
umount /mnt/test1
it would blow up (if subvol xxx doesn't exist). This patch fixes that problem.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
With multi-threaded writes we were getting ENOSPC early because somebody would
come in, start flushing delalloc because they couldn't make their reservation,
and in the meantime other threads would come in and use the space that was
getting freed up, so when the original thread went to check to see if they had
space they didn't and they'd return ENOSPC. So instead if we have some free
space but not enough for our reservation, take the reservation and then start
doing the flushing. The only time we don't take reservations is when we've
already overcommitted our space, that way we don't have people who come late to
the party way overcommitting ourselves. This also moves all of the retrying and
flushing code into reserve_metdata_bytes so it's all uniform. This keeps my
fs_mark test from returning -ENOSPC as soon as it starts and actually lets me
fill up the disk. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Because the ENOSPC code over reserves super aggressively we end up allocating
chunks way more often than we should. For example with my fs_mark tests on a
2gb fs I can end up reserved 1gb just for metadata, when only 34mb of that is
being used. So instead check to see if the amount of space actually used is
less than 30% of the total space, and if so don't allocate a chunk, but only if
we have at least 256mb of free space to make sure we don't put too much pressure
on free space.
Signed-off-by: Josef Bacik <josef@redhat.com>
Currently we try and flush delalloc, but we only do that in a sort of weak way,
which works fine in most cases but if we're under heavy pressure we need to be
able to wait for flushing to happen. Also instead of checking the bytes
reserved in the block_rsv, check the space info since it is more accurate. The
sync option will be used in a future patch.
Signed-off-by: Josef Bacik <josef@redhat.com>
The global reservation stuff tries to add together DATA and METADATA used in
order to figure out how much to reserve for everything, but this doesn't work
right for mixed block groups. Instead if we have mixed block groups just set
data used to 0. Also with mixed block groups we will use bytes_may_use for
keeping track of delalloc bytes, so we need to take that into account in our
reservation calculations.
Signed-off-by: Josef Bacik <josef@redhat.com>
The new ENOSPC stuff breaks out the raid types which breaks the way we were
reporting df to the system. This fixes it back so that Available is the total
space available to data and used is the actual bytes used by the filesystem.
This means that Available is Total - data used - all of the metadata space.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
The new ENOSPC stuff broke the df ioctl since we no longer create seperate space
info's for each RAID type. So instead, loop through each space info's raid
lists so we can get the right RAID information which will allow the df ioctl to
tell us RAID types again. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
In very severe ENOSPC cases we can run out of inodes to do delalloc on, which
means we'll just keep looping trying to shrink delalloc. Instead, if we fail to
shrink delalloc 3 times in a row break out since we're not likely to make any
progress. Tested this with a 100mb fs an xfstests test 13. Before the patch it
would hang the box, with the patch we get -ENOSPC like we should. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP
detection for barriers and stop setting the barrier flag for discards.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
xen-blkfront: fix missing out label
blkdev: fix blkdev_issue_zeroout return value
block: update request stacking methods to support discards
block: fix missing export of blk_types.h
writeback: fix bad _bh spinlock nesting
drbd: revert "delay probes", feature is being re-implemented differently
drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
drbd: Disable delay probes for the upcomming release
writeback: cleanup bdi_register
writeback: add new tracepoints
writeback: remove unnecessary init_timer call
writeback: optimize periodic bdi thread wakeups
writeback: prevent unnecessary bdi threads wakeups
writeback: move bdi threads exiting logic to the forker thread
writeback: restructure bdi forker loop a little
writeback: move last_active to bdi
writeback: do not remove bdi from bdi_list
writeback: simplify bdi code a little
writeback: do not lose wake-ups in bdi threads
...
Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
BTRFS does not define a '->write_super()' method, so it should
not mark its superblock as dirty. This looks like some left-over.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
NB: do we want btrfs_wait_ordered_range() on eviction of
inodes with positive i_nlink on subvolume with zero root_refs?
If not, btrfs_evict_inode() can be simplified by unconditionally
bailing out in case of i_nlink > 0 in the very beginning...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
add I_CLEAR instead of replacing I_FREEING with it. I_CLEAR is
equivalent to I_FREEING for almost all code looking at either;
it's there to keep track of having called clear_inode() exactly
once per inode lifetime, at some point after having set I_FREEING.
I_CLEAR and I_FREEING never get set at the same time with the
current code, so we can switch to setting i_flags to I_FREEING | I_CLEAR
instead of I_CLEAR without loss of information. As the result of
such change, checks become simpler and the amount of code that needs
to know about I_CLEAR shrinks a lot.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.
In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:
spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above
In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver. There were two flags in the bio that were
missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've
renamed two request flags that had a superflous RW in them.
Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
1. The BTRFS_IOC_CLONE and BTRFS_IOC_CLONE_RANGE ioctls should check
whether the donor file is append-only before writing to it.
2. The BTRFS_IOC_CLONE_RANGE ioctl appears to have an integer
overflow that allows a user to specify an out-of-bounds range to copy
from the source file (if off + len wraps around). I haven't been able
to successfully exploit this, but I'd imagine that a clever attacker
could use this to read things he shouldn't. Even if it's not
exploitable, it couldn't hurt to be safe.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
cc: stable@kernel.org
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The CLONE and CLONE_RANGE ioctls round up the range of extents being
cloned to the block size when the range to clone extends to the end of file
(this is always the case with CLONE). It was then using that offset when
extending the destination file's i_size. Fix this by not setting i_size
beyond the originally requested ending offset.
This bug was introduced by a22285a6 (2.6.35-rc1).
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
split_leaf was not properly balancing leaves when it was forced to
split a leaf twice. This commit adds an extra push left and right
before forcing the double split in hopes of getting the slot where
we want to insert at either the start or end of the leaf.
If the extra pushes do work, then we are able to avoid splitting twice
and we keep the tree properly balanced.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This was just an odd wrapper around writeback_inodes_wb. Removing this
also allows to get rid of the bdi member of struct writeback_control
which was rather out of place there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: The file argument for fsync() is never null
Btrfs: handle ERR_PTR from posix_acl_from_xattr()
Btrfs: avoid BUG when dropping root and reference in same transaction
Btrfs: prohibit a operation of changing acl's mask when noacl mount option used
Btrfs: should add a permission check for setfacl
Btrfs: btrfs_lookup_dir_item() can return ERR_PTR
Btrfs: btrfs_read_fs_root_no_name() returns ERR_PTRs
Btrfs: unwind after btrfs_start_transaction() errors
Btrfs: btrfs_iget() returns ERR_PTR
Btrfs: handle kzalloc() failure in open_ctree()
Btrfs: handle error returns from btrfs_lookup_dir_item()
Btrfs: Fix BUG_ON for fs converted from extN
Btrfs: Fix null dereference in relocation.c
Btrfs: fix remap_file_pages error
Btrfs: uninitialized data is check_path_shared()
Btrfs: fix fallocate regression
Btrfs: fix loop device on top of btrfs
The "file" argument for fsync is never null so we can remove this check.
What drew my attention here is that 7ea8085910: "drop unused dentry
argument to ->fsync" introduced an unconditional dereference at the
start of the function and that generated a smatch warning.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to
pass null values to set_cached_acl()
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes
with end_transaction(), the cleaner kthread may come in and
drop the root in the same transaction. If that's the case, the
root's refs still == 1 in the tree when btrfs_del_root() deletes
the item, because commit_fs_roots() hasn't updated it yet (that
happens during the commit).
This wasn't a problem before only because
btrfs_ioctl_snap_destroy() would commit the transaction before dropping
the dentry reference, so the dead root wouldn't get queued up until
after the fs root item was updated in the btree.
Since it is not an error to drop the root reference and the root in the
same transaction, just drop the BUG_ON() in btrfs_del_root().
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
when used Posix File System Test Suite(pjd-fstest) to test btrfs,
some cases about setfacl failed when noacl mount option used.
I simplified used commands in pjd-fstest, and the following steps
can reproduce it.
------------------------
# cd btrfs-part/
# mkdir aaa
# setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest.
------------------------
I checked ext3, a warning message occured, like as:
setfacl: aaa/: Operation not supported
Certainly, it's expected by pjd-fstest.
So, i compared acl.c of btrfs and ext3. Based on that, a patch created.
Fortunately, it works.
Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
On btrfs, do the following
------------------
# su user1
# cd btrfs-part/
# touch aaa
# getfacl aaa
# file: aaa
# owner: user1
# group: user1
user::rw-
group::rw-
other::r--
# su user2
# cd btrfs-part/
# setfacl -m u::rwx aaa
# getfacl aaa
# file: aaa
# owner: user1
# group: user1
user::rwx <- successed to setfacl
group::rw-
other::r--
------------------
but we should prohibit it that user2 changing user1's acl.
In fact, on ext3 and other fs, a message occurs:
setfacl: aaa: Operation not permitted
This patch fixed it.
Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_lookup_dir_item() can return either ERR_PTRs or null.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_read_fs_root_no_name() returns ERR_PTRs on error so I added a
check for that. It's not clear to me if it can also return NULL
pointers or not so I left the original NULL pointer check as is.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This was added by a22285a6a3: "Btrfs: Integrate metadata reservation
with start_transaction". If we goto out here then we skip all the
unwinding and there are locks still held etc.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_iget() returns an ERR_PTR() on failure and not null.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Unwind and return -ENOMEM if the allocation fails here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If btrfs_lookup_dir_item() fails, we should can just let the mount fail
with an error.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tree blocks can live in data block groups in FS converted from extN.
So it's easy to trigger the BUG_ON.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Fix a potential null dereference in relocation.c
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
when we use remap_file_pages() to remap a file, remap_file_pages always return
error. It is because btrfs didn't set VM_CAN_NONLINEAR for vma.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
refs can be used with uninitialized data if btrfs_lookup_extent_info()
fails on the first pass through the loop. In the original code if that
happens then check_path_shared() probably returns 1, this patch
changes it to return 1 for safety.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Seems that when btrfs_fallocate was converted to use the new ENOSPC stuff we
dropped passing the mode to the function that actually does the preallocation.
This breaks anybody who wants to use FALLOC_FL_KEEP_SIZE. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We cannot use the loop device which has been connected to a file in the btrf
The reproduce steps is following:
# dd if=/dev/zero of=vdev0 bs=1M count=1024
# losetup /dev/loop0 vdev0
# mkfs.btrfs /dev/loop0
...
failed to zero device start -5
The reason is that the btrfs don't implement either ->write_begin or ->write
the VFS API, so we fix it by setting ->write to do_sync_write().
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (27 commits)
Btrfs: add more error checking to btrfs_dirty_inode
Btrfs: allow unaligned DIO
Btrfs: drop verbose enospc printk
Btrfs: Fix block generation verification race
Btrfs: fix preallocation and nodatacow checks in O_DIRECT
Btrfs: avoid ENOSPC errors in btrfs_dirty_inode
Btrfs: move O_DIRECT space reservation to btrfs_direct_IO
Btrfs: rework O_DIRECT enospc handling
Btrfs: use async helpers for DIO write checksumming
Btrfs: don't walk around with task->state != TASK_RUNNING
Btrfs: do aio_write instead of write
Btrfs: add basic DIO read/write support
direct-io: do not merge logically non-contiguous requests
direct-io: add a hook for the fs to provide its own submit_bio function
fs: allow short direct-io reads to be completed via buffered IO
Btrfs: Metadata ENOSPC handling for balance
Btrfs: Pre-allocate space for data relocation
Btrfs: Metadata ENOSPC handling for tree log
Btrfs: Metadata reservation for orphan inodes
Btrfs: Introduce global metadata reservation
...
The ENOSPC code will now return ENOSPC to btrfs_start_transaction.
btrfs_dirty_inode needs to check for this and error out appropriately.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In order to support DIO that isn't aligned to the filesystem blocksize,
we fall back to buffered for any unaligned DIOs.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
After the path is released, the generation number got from block
pointer is no long valid. The race may cause disk corruption, because
verify_parent_transid() calls clear_extent_buffer_uptodate() when
generation numbers mismatch.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The O_DIRECT code wasn't checking for multiple references
on preallocated or nodatacow extents. This means it
wasn't honoring snapshots properly.
The fix here is to add an explicit check for multiple references
This also fixes the math for selecting the correct disk block,
making sure not to go past the end of the extent.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_dirty_inode tries to sneak in without much waiting or
space reservation, mostly for performance reasons. This
usually works well but can cause problems when there are
many many writers.
When btrfs_update_inode fails with ENOSPC, we fallback
to a slower btrfs_start_transaction call that will reserve
some space.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This moves the delalloc space reservation done for O_DIRECT
into btrfs_direct_IO. This way we don't leak reserved space
if the generic O_DIRECT write code errors out before it
calls into btrfs_direct_IO.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This changes O_DIRECT write code to mark extents as delalloc
while it is processing them. Yan Zheng has reworked the
enospc accounting based on tracking delalloc extents and
this makes it much easier to track enospc in the O_DIRECT code.
There are a few space cases with the O_DIRECT code though,
it only sets the EXTENT_DELALLOC bits, instead of doing
EXTENT_DELALLOC | EXTENT_DIRTY | EXTENT_UPTODATE, because
we don't want to mess with clearing the dirty and uptodate
bits when things go wrong. This is important because there
are no pages in the page cache, so any extent state structs
that we put in the tree won't get freed by releasepage. We have
to clear them ourselves as the DIO ends.
With this commit, we reserve space at in btrfs_file_aio_write,
and then as each btrfs_direct_IO call progresses it sets
EXTENT_DELALLOC on the range.
btrfs_get_blocks_direct is responsible for clearing the delalloc
at the same time it drops the extent lock.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This adds:
alias: devname:<name>
to some common kernel modules, which will allow the on-demand loading
of the kernel module when the device node is accessed.
Ideally all these modules would be compiled-in, but distros seems too
much in love with their modularization that we need to cover the common
cases with this new facility. It will allow us to remove a bunch of pretty
useless init scripts and modprobes from init scripts.
The static device node aliases will be carried in the module itself. The
program depmod will extract this information to a file in the module directory:
$ cat /lib/modules/2.6.34-00650-g537b60d-dirty/modules.devname
# Device nodes to trigger on-demand module loading.
microcode cpu/microcode c10:184
fuse fuse c10:229
ppp_generic ppp c108:0
tun net/tun c10:200
dm_mod mapper/control c10:235
Udev will pick up the depmod created file on startup and create all the
static device nodes which the kernel modules specify, so that these modules
get automatically loaded when the device node is accessed:
$ /sbin/udevd --debug
...
static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184
static_dev_create_from_modules: mknod '/dev/fuse' c10:229
static_dev_create_from_modules: mknod '/dev/ppp' c108:0
static_dev_create_from_modules: mknod '/dev/net/tun' c10:200
static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235
udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666
udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666
A few device nodes are switched to statically allocated numbers, to allow
the static nodes to work. This might also useful for systems which still run
a plain static /dev, which is completely unsafe to use with any dynamic minor
numbers.
Note:
The devname aliases must be limited to the *common* and *single*instance*
device nodes, like the misc devices, and never be used for conceptually limited
systems like the loop devices, which should rather get fixed properly and get a
control node for losetup to talk to, instead of creating a random number of
device nodes in advance, regardless if they are ever used.
This facility is to hide the mess distros are creating with too modualized
kernels, and just to hide that these modules are not compiled-in, and not to
paper-over broken concepts. Thanks! :)
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The async helper threads offload crc work onto all the
CPUs, and make streaming writes much faster. This
changes the O_DIRECT write code to use them. The only
small complication was that we need to pass in the
logical offset in the file for each bio, because we can't
find it in the bio's pages.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Yan Zheng noticed two places we were doing a lot of work
without task->state set to TASK_RUNNING. This sets the state
properly after we get ready to sleep but decide not to.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In order for AIO to work, we need to implement aio_write. This patch converts
our btrfs_file_write to btrfs_aio_write. I've tested this with xfstests and
nothing broke, and the AIO stuff magically started working. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This provides basic DIO support for reading and writing. It does not do the
work to recover from mismatching checksums, that will come later. A few design
changes have been made from Jim's code (sorry Jim!)
1) Use the generic direct-io code. Jim originally re-wrote all the generic DIO
code in order to account for all of BTRFS's oddities, but thanks to that work it
seems like the best bet is to just ignore compression and such and just opt to
fallback on buffered IO.
2) Fallback on buffered IO for compressed or inline extents. Jim's code did
it's own buffering to make dio with compressed extents work. Now we just
fallback onto normal buffered IO.
3) Use ordered extents for the writes so that all of the
lock_extent()
lookup_ordered()
type checks continue to work.
4) Do the lock_extent() lookup_ordered() loop in readpage so we don't race with
DIO writes.
I've tested this with fsx and everything works great. This patch depends on my
dio and filemap.c patches to work. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch adds metadata ENOSPC handling for the balance code.
It is consisted by following major changes:
1. Avoid COW tree leave in the phrase of merging tree.
2. Handle interaction with snapshot creation.
3. make the backref cache can live across transactions.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Pre-allocate space for data relocation. This can detect ENOPSC
condition caused by fragmentation of free space.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Previous patches make the allocater return -ENOSPC if there is no
unreserved free metadata space. This patch updates tree log code
and various other places to propagate/handle the ENOSPC error.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reserve metadata space for extent tree, checksum tree and root tree
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Introduce metadata reservation context for delayed allocation
and update various related functions.
This patch also introduces EXTENT_FIRST_DELALLOC control bit for
set/clear_extent_bit. It tells set/clear_bit_hook whether they
are processing the first extent_state with EXTENT_DELALLOC bit
set. This change is important if set/clear_extent_bit involves
multiple extent_state.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Besides simplify the code, this change makes sure all metadata
reservation for normal metadata operations are released after
committing transaction.
Changes since V1:
Add code that check if unlink and rmdir will free space.
Add ENOSPC handling for clone ioctl.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Introducing metadata reseravtion contexts has two major advantages.
First, it makes metadata reseravtion more traceable. Second, it can
reclaim freed space and re-add them to the itself after transaction
committed.
Besides add btrfs_block_rsv structure and related helper functions,
This patch contains following changes:
Move code that decides if freed tree block should be pinned into
btrfs_free_tree_block().
Make space accounting more accurate, mainly for handling read only
block groups.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
All code in init_btrfs_i can be moved into btrfs_alloc_inode()
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Shrink delayed allocation space in a synchronized manner is more
controllable than flushing all delay allocated space in an async
thread.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We already have fs_info->chunk_mutex to avoid concurrent
chunk creation.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The size of reserved space is stored in space_info. If block groups
of different raid types are linked to separate space_info, changing
allocation profile will corrupt reserved space accounting.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (69 commits)
fix handling of offsets in cris eeprom.c, get rid of fake on-stack files
get rid of home-grown mutex in cris eeprom.c
switch ecryptfs_write() to struct inode *, kill on-stack fake files
switch ecryptfs_get_locked_page() to struct inode *
simplify access to ecryptfs inodes in ->readpage() and friends
AFS: Don't put struct file on the stack
Ban ecryptfs over ecryptfs
logfs: replace inode uid,gid,mode initialization with helper function
ufs: replace inode uid,gid,mode initialization with helper function
udf: replace inode uid,gid,mode init with helper
ubifs: replace inode uid,gid,mode initialization with helper function
sysv: replace inode uid,gid,mode initialization with helper function
reiserfs: replace inode uid,gid,mode initialization with helper function
ramfs: replace inode uid,gid,mode initialization with helper function
omfs: replace inode uid,gid,mode initialization with helper function
bfs: replace inode uid,gid,mode initialization with helper function
ocfs2: replace inode uid,gid,mode initialization with helper function
nilfs2: replace inode uid,gid,mode initialization with helper function
minix: replace inode uid,gid,mode init with helper
ext4: replace inode uid,gid,mode init with helper
...
Trivial conflict in fs/fs-writeback.c (mark bitfields unsigned)
