If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Before:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
After:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
Fixes: 5a1a99cd2e ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This covers two different use cases. The first one is cgroup
filtering given by -G/--cgroup option which controls the off-cpu
profiling for tasks in the given cgroups only.
The other use case is cgroup sampling which is enabled by
--all-cgroups option and it adds PERF_SAMPLE_CGROUP to the sample_type
to set the cgroup id of the task in the sample data.
Example output.
$ sudo perf record -a --off-cpu --all-cgroups sleep 1
$ sudo perf report --stdio -s comm,cgroup --call-graph=no
...
# Samples: 144 of event 'offcpu-time'
# Event count (approx.): 48452045427
#
# Children Self Command Cgroup
# ........ ........ ............... ..........................................
#
61.57% 5.60% Chrome_ChildIOT /user.slice/user-657345.slice/user@657345.service/app.slice/...
29.51% 7.38% Web Content /user.slice/user-657345.slice/user@657345.service/app.slice/...
17.48% 1.59% Chrome_IOThread /user.slice/user-657345.slice/user@657345.service/app.slice/...
16.48% 4.12% pipewire-pulse /user.slice/user-657345.slice/user@657345.service/session.slice/...
14.48% 2.07% perf /user.slice/user-657345.slice/user@657345.service/app.slice/...
14.30% 7.15% CompositorTileW /user.slice/user-657345.slice/user@657345.service/app.slice/...
13.33% 6.67% Timer /user.slice/user-657345.slice/user@657345.service/app.slice/...
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220518224725.742882-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --off-cpu option to enable the off-cpu profiling with BPF. It'd
use a bpf_output event and rename it to "offcpu-time". Samples will
be synthesized at the end of the record session using data from a BPF
map which contains the aggregated off-cpu time at context switches.
So it needs root privilege to get the off-cpu profiling.
Each sample will have a separate user stacktrace so it will skip
kernel threads. The sample ip will be set from the stacktrace and
other sample data will be updated accordingly. Currently it only
handles some basic sample types.
The sample timestamp is set to a dummy value just not to bother with
other events during the sorting. So it has a very big initial value
and increase it on processing each samples.
Good thing is that it can be used together with regular profiling like
cpu cycles. If you don't want to that, you can use a dummy event to
enable off-cpu profiling only.
Example output:
$ sudo perf record --off-cpu perf bench sched messaging -l 1000
$ sudo perf report --stdio --call-graph=no
# Total Lost Samples: 0
#
# Samples: 41K of event 'cycles'
# Event count (approx.): 42137343851
...
# Samples: 1K of event 'offcpu-time'
# Event count (approx.): 587990831640
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... .................. .........................
#
81.66% 0.00% sched-messaging libc-2.33.so [.] __libc_start_main
81.66% 0.00% sched-messaging perf [.] cmd_bench
81.66% 0.00% sched-messaging perf [.] main
81.66% 0.00% sched-messaging perf [.] run_builtin
81.43% 0.00% sched-messaging perf [.] bench_sched_messaging
40.86% 40.86% sched-messaging libpthread-2.33.so [.] __read
37.66% 37.66% sched-messaging libpthread-2.33.so [.] __write
2.91% 2.91% sched-messaging libc-2.33.so [.] __poll
...
As you can see it spent most of off-cpu time in read and write in
bench_sched_messaging(). The --call-graph=no was added just to make
the output concise here.
It uses perf hooks facility to control BPF program during the record
session rather than adding new BPF/off-cpu specific calls.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220518224725.742882-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Counts expected fields for various commands. No testing added for
summary mode since it is broken.
An example of the summary output is:
summary,263831,,instructions:u,1435072,100.0,0.46,insn per cycle
,,,,,1.37,stalled cycles per insn
This should be:
summary,263831,,instructions:u,1435072,100.0,0.46,insn per cycle
summary,,,,,,1.37,stalled cycles per insn
The output has 7 fields when it should have 8. Additionally, the newline
spacing is wrong, so it was excluded from testing until a fix is made.
Committer testing:
$ perf test "perf stat CSV output"
88: perf stat CSV output linter : Ok
$
$ perf test -v "perf stat CSV output"
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
88: perf stat CSV output linter :
--- start ---
test child forked, pid 2622839
Checking CSV output: no args [Success]
Checking CSV output: system wide [Skip] paranoid and not root
Checking CSV output: system wide [Skip] paranoid and not root
Checking CSV output: interval [Success]
Checking CSV output: event [Success]
Checking CSV output: per core [Skip] paranoid and not root
Checking CSV output: per thread [Skip] paranoid and not root
Checking CSV output: per die [Skip] paranoid and not root
Checking CSV output: per node [Skip] paranoid and not root
Checking CSV output: per socket [Skip] paranoid and not root
test child finished with 0
---- end ----
perf stat CSV output linter: Ok
$
I did a s/parnoia/paranoid/g on the [Skip] lines.
Signed-off-by: Claire Jensen <cjense@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alyssa Ross <hi@alyssa.is>
Cc: Claire Jensen <clairej735@gmail.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220525053814.3265216-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The psock_snd test sends and receives packets over loopback, and
the test results depend on parameter settings:
Set rp_filter=0,
or set rp_filter=1 and accept_local=1
so that the test will pass. Otherwise, this test will fail with
Resource temporarily unavailable:
sudo ./psock_snd.sh
dgram
tx: 128
rx: 142
./psock_snd: recv: Resource temporarily unavailable
For most distro kernel releases(like Ubuntu or Centos), the parameter
rp_filter is enabled by default, so it's necessary to enable the
parameter lo.accept_local in psock_snd test. And this test runs
inside a netns, changing a sysctl is fine.
Signed-off-by: luyun <luyun@kylinos.cn>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220525031819.866684-1-luyun_611@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound updates from Takashi Iwai:
"Not much dramatic changes at this time, but we've received quite a lot
of changes for ASoC, while there are still a few fixes and quirks for
usual HD- and USB-auido. Here are some highlights.
ASoC:
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs
- Initial stages of Intel AVS driver merge
- Introduction of v4 IPC mechanism for SOF
- TDM mode support for AK4613
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
Others:
- A few regression fixes after the USB-audio endpoint management
refactoring
- More enhancements for Cirrus HD-audio codec support (still ongoing)
- Addition of generic serial MIDI driver"
* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
ALSA: hda/realtek - Add new type for ALC245
ALSA: usb-audio: Configure sync endpoints before data
ALSA: ctxfi: fix typo in comment
ALSA: cs5535audio: fix typo in comment
ALSA: ctxfi: Add SB046x PCI ID
ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
ALSA: usb-audio: Workaround for clock setup on TEAC devices
ALSA: lola: Bounds check loop iterator against streams array size
ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
ASoC: rt1308-sdw: add the default value of register 0xc320
ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
ASoC: rt9120: Fix 3byte read, valule offset typo
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
ASoC: SOF: mediatek: remove duplicate include in mt8195.c
ASoC: SOF: mediatek: Add mt8195 debug dump
ASoC: SOF: mediatek: Add mediatek common debug dump
...
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Intel PT:
- Allow hardware tracing on KVM test programs. In this case, the VM
is not running an OS, but only the functions loaded into it by the
hypervisor test program, and conveniently, loaded at the same
virtual addresses.
- Improve documentation:
- Add link to perf wiki's page
- Cleanups:
- Delete now unused perf-with-kcore.sh script
- Remove unused machines__find_host()
ARM SPE (Statistical Profile Extensions):
- Add man page entry.
Vendor Events:
- Update various Intel event topics
- Update various microarch events
- Fix various cstate metrics
- Fix Alderlake metric groups
- Add sapphirerapids events
- Add JSON files for ARM Cortex A34, A35, A55, A510, A65, A73, A75,
A77, A78, A710, X1, X2 and Neoverse E1
- Update Cortex A57/A72
perf stat:
- Introduce stats for the user and system rusage times
perf c2c:
- Prep work to support ARM systems
perf annotate:
- Add --percent-limit option
perf lock:
- Add -t/--thread option for report
- Do not discard broken lock stats
perf bench:
- Add breakpoint benchmarks
perf test:
- Limit to only run executable scripts in tests
- Add basic perf record tests
- Add stat record+report test
- Add basic stat and topdown group test
- Skip several tests when the user hasn't permission to perform them
- Fix test case 81 ("perf record tests") on s390x
perf version:
- debuginfod support improvements
perf scripting python:
- Expose symbol offset and source information
perf build:
- Error for BPF skeletons without LIBBPF
- Use Python devtools for version autodetection rather than runtime
Miscellaneous:
- Add riscv64 support to 'perf jitdump'
- Various fixes/tidy ups related to cpu_map
- Fixes for handling Intel hybrid systems"
* tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (122 commits)
perf intel-pt: Add guest_code support
perf kvm report: Add guest_code support
perf script: Add guest_code support
perf tools: Add guest_code support
perf tools: Factor out thread__set_guest_comm()
perf tools: Add machine to machines back pointer
perf vendors events arm64: Update Cortex A57/A72
perf vendors events arm64: Arm Neoverse E1
perf vendors events arm64: Arm Cortex-X2
perf vendors events arm64: Arm Cortex-X1
perf vendors events arm64: Arm Cortex-A710
perf vendors events arm64: Arm Cortex-A78
perf vendors events arm64: Arm Cortex-A77
perf vendors events arm64: Arm Cortex-A75
perf vendors events arm64: Arm Cortex-A73
perf vendors events arm64: Arm Cortex-A65
perf vendors events arm64: Arm Cortex-A510
perf vendors events arm64: Arm Cortex-A55
perf vendors events arm64: Arm Cortex-A35
perf vendors events arm64: Arm Cortex-A34
...
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. This adds cpu controller selftests and there
are a couple code cleanup patches"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove the superfluous judgment
cgroup: Make cgroup_debug static
kseltest/cgroup: Make test_stress.sh work if run interactively
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
cgroup: Add config file to cgroup selftest suite
cgroup: Add test_cpucg_max_nested() testcase
cgroup: Add test_cpucg_max() testcase
cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
cgroup: Add test_cpucg_weight_underprovisioned() testcase
cgroup: Add test_cpucg_weight_overprovisioned() testcase
cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
cgroup: Add new test_cpu.c test suite in cgroup selftests
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
Pull Kselftest updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests:
- add mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests"
* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftests/ir : Improve readability of modprobe error message
selftests/resctrl: Fix null pointer dereference on open failed
selftests/resctrl: Add missing SPDX license to Makefile
selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
selftests/resctrl: Change the default limited time to 120 seconds
selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
selftests/resctrl: Extend CPU vendor detection
selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
selftests/x86/amx: Use provided __cpuid_count() macro
selftests/vm/pkeys: Use provided __cpuid_count() macro
selftests: Provide local define of __cpuid_count()
selftests/damon: add damon to selftests root Makefile
selftests/binderfs: Improve message to provide more info
selftests: mqueue: drop duplicate min definition
selftests/ftrace: add mips support for kprobe args syntax tests
selftests/ftrace: add mips support for kprobe args string tests
The "test_hmm.sh" file used by run_vmtests.sh dose not be installed into
INSTALL_PATH. Thus run_vmtests.sh can not call it in INSTALL_PATH:
---------------------------
running ./test_hmm.sh smoke
---------------------------
./run_vmtests.sh: line 74: ./test_hmm.sh: No such file or directory
[FAIL]
-----------------------
Add "test_hmm.sh" to TEST_FILES so that it will be installed.
Link: https://lkml.kernel.org/r/20220521083825.319654-3-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: vm: a few fixup patches".
This series contains three fixup patches for vm selftests. They are
independent. Please see the patches.
This patch (of 3):
Currently, ksm_tests operates "merge_across_nodes" with NUMA either
enabled or disabled. In a system with NUMA disabled, these operations
will fail and output a misleading report given "merge_across_nodes" does
not exist in sysfs:
----------------------------
running ./ksm_tests -M -p 10
----------------------------
f /sys/kernel/mm/ksm/merge_across_nodes
fopen: No such file or directory
Cannot save default tunables
[FAIL]
----------------------
So check numa_available() before those operations to skip them if NUMA is
disabled.
Link: https://lkml.kernel.org/r/20220521083825.319654-1-patrick.wang.shcn@gmail.com
Link: https://lkml.kernel.org/r/20220521083825.319654-2-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce process_mrelease syscall sanity tests which include tests
which expect to fail:
- process_mrelease with invalid pidfd and flags inputs
- process_mrelease on a live process with no pending signals
and valid process_mrelease usage which is expected to succeed. Because
process_mrelease has to be used against a process with a pending SIGKILL,
it's possible that the process exits before process_mrelease gets called.
In such cases we retry the test with a victim that allocates twice more
memory up to 1GB. This would require the victim process to spend more
time during exit and process_mrelease has a better chance of catching the
process before it exits and succeeding.
On success the test reports the amount of memory the child had to allocate
for reaping to succeed. Sample output:
$ mrelease_test
Success reaping a child with 1MB of memory allocations
On failure the test reports the failure. Sample outputs:
$ mrelease_test
All process_mrelease attempts failed!
$ mrelease_test
process_mrelease: Invalid argument
Link: https://lkml.kernel.org/r/20220518204316.13131-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fixing side effect of the so-called opportunistic change in the commit.
Fixes: dc8a9febbab0 ("KVM: selftests: x86: Fix test failure on arch lbr capable platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220518170118.66263-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/riscv changes for 5.19
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
On Arch LBR capable platforms, LBR_FMT in perf capability msr is 0x3f,
so the last format test will fail. Use a true invalid format(0x30) for
the test if it's running on these platforms. Opportunistically change
the file name to reflect the tests actually carried out.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220512084046.105479-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
