Before this patch the existence of vlan filters was conditional on the vlan
protocol being matched in the tc rule. For example, the following rule:
tc filter add dev eth1 ingress flower vlan_prio 5
was illegal because vlan protocol (e.g. 802.1q) does not appear in the rule.
Remove the above restriction by looking at the num_of_vlans filter to
allow further matching on vlan attributes. The following rule becomes
legal as a result of this commit:
tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5
because having num_of_vlans==1 implies that the packet is single tagged.
Change is_vlan_key helper to look at the number of vlans in addition to
the vlan ethertype. The outcome of this change is that outer (e.g. vlan_prio)
and inner (e.g. cvlan_prio) tag vlan filters require the number of vlan
tags to be greater then 0 and 1 accordingly.
As a result of is_vlan_key change, the ethertype may be set to 0 when
matching on the number of vlans. Update fl_set_key_vlan to avoid setting
key, mask vlan_tpid for the 0 ethertype.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are bookkeeping parts of the new num_of_vlans filter.
Defines, dump, load and set are being done here.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The goal is to make the following TC commands possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
From our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are somewhat repetitive ethertype checks in fl_set_key. Refactor
them into is_vlan_key helper function.
To make the changes clearer, avoid touching identation levels. This is
the job for the next patch in the series.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A cross-chip notifier with "targeted_match=true" is one that matches
only the local port of the switch that emitted it. In other words,
passing through the cross-chip notifier layer serves no purpose.
Eliminate this concept by calling directly ds->ops->port_change_mtu
instead of emitting a targeted cross-chip notifier. This leaves the
DSA_NOTIFIER_MTU event being emitted only for MTU updates on the CPU
port, which need to be reflected also across all DSA links.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can get a hold of the "ds" pointer directly from "dp", no need for
the dsa_slave_priv.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We could retrieve the cpu_dp pointer directly from the "dp" we already
have, no need to resort to dsa_to_port(ds, port).
This change also removes the need for an "int port", so that is also
deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the more conventional iterator over user ports instead of explicitly
ignoring them, and use the more conventional name "other_dp" instead of
"dp_iter", for readability.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To determine whether a given port should react to the port targeted by
the notifier, dsa_port_host_vlan_match() and dsa_port_host_address_match()
look at the positioning of the switch port currently executing the
notifier relative to the switch port for which the notifier was emitted.
To maintain stylistic compatibility with the other match functions from
switch.c, the host address and host VLAN match functions take the
notifier information about targeted port, switch and tree indices as
argument. However, these functions only use that information to retrieve
the struct dsa_port *targeted_dp, which is an invariant for the outer
loop that calls them. So it makes more sense to calculate the targeted
dp only once, and pass it to them as argument.
But furthermore, the targeted dp is actually known at the time the call
to dsa_port_notify() is made. It is just that we decide to only save the
indices of the port, switch and tree in the notifier structure, just to
retrace our steps and find the dp again using dsa_switch_find() and
dsa_to_port().
But both the above functions are relatively expensive, since they need
to iterate through lists. It appears more straightforward to make all
notifiers just pass the targeted dp inside their info structure, and
have the code that needs the indices to look at info->dp->index instead
of info->port, or info->dp->ds->index instead of info->sw_index, or
info->dp->ds->dst->index instead of info->tree_index.
For the sake of consistency, all cross-chip notifiers are converted to
pass the "dp" directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dsa_port_switchdev_unsync_attrs() there is a comment that resetting
the VLAN filtering isn't done where it is expected. And since commit
108dc8741c ("net: dsa: Avoid cross-chip syncing of VLAN filtering"),
there is no reason to handle this in switch.c either.
Therefore, move the logic to port.c, and adapt it slightly to the data
structures and naming conventions from there.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_{sk,task,inode}_storage_free() do not need to use
call_rcu_tasks_trace as no BPF program should be accessing the owner
as it's being destroyed. The only other reader at this point is
bpf_local_storage_map_free() which uses normal RCU.
The only path that needs trace RCU are:
* bpf_local_storage_{delete,update} helpers
* map_{delete,update}_elem() syscalls
Fixes: 0fe4b381a5 ("bpf: Allow bpf_local_storage to be used by sleepable programs")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220418155158.2865678-1-kpsingh@kernel.org
If IFLA_ALT_IFNAME is set and given interface is not found,
we should return ENODEV and be consistent with IFLA_IFNAME
behaviour
This commit extends feature of commit 76c9ac0ee8,
"net: rtnetlink: add possibility to use alternative names as message handle"
CC: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
buffer called "ifname" given in function rtnl_dev_get
is always valid when called by setlink/newlink,
but contains only empty string when IFLA_IFNAME is not given. So
IFLA_ALT_IFNAME is always ignored
This patch fixes rtnl_dev_get function with a remove of ifname argument,
and move ifname copy in do_setlink when required.
It extends feature of commit 76c9ac0ee8,
"net: rtnetlink: add possibility to use alternative names as message
handle""
CC: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the interface does not exist, and a group is given, the given
parameters are being set to all interfaces of the given group. The given
IFNAME/ALT_IF_NAME are being ignored in that case.
That can be dangerous since a typo (or a deleted interface) can produce
weird side effects for caller:
Case 1:
IFLA_IFNAME=valid_interface
IFLA_GROUP=1
MTU=1234
Case 1 will update MTU and group of the given interface "valid_interface".
Case 2:
IFLA_IFNAME=doesnotexist
IFLA_GROUP=1
MTU=1234
Case 2 will update MTU of all interfaces in group 1. IFLA_IFNAME is
ignored in this case
This behaviour is not consistent and dangerous. In order to fix this issue,
we now return ENODEV when the given IFNAME does not exist.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Brian Baboch <brian.baboch@wifirst.fr>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fixes issue:
* If we install tc filters with act_skbedit in clsact hook.
It doesn't work, because netdev_core_pick_tx() overwrites
queue_mapping.
$ tc filter ... action skbedit queue_mapping 1
And this patch is useful:
* We can use FQ + EDT to implement efficient policies. Tx queues
are picked by xps, ndo_select_queue of netdev driver, or skb hash
in netdev_core_pick_tx(). In fact, the netdev driver, and skb
hash are _not_ under control. xps uses the CPUs map to select Tx
queues, but we can't figure out which task_struct of pod/containter
running on this cpu in most case. We can use clsact filters to classify
one pod/container traffic to one Tx queue. Why ?
In containter networking environment, there are two kinds of pod/
containter/net-namespace. One kind (e.g. P1, P2), the high throughput
is key in these applications. But avoid running out of network resource,
the outbound traffic of these pods is limited, using or sharing one
dedicated Tx queues assigned HTB/TBF/FQ Qdisc. Other kind of pods
(e.g. Pn), the low latency of data access is key. And the traffic is not
limited. Pods use or share other dedicated Tx queues assigned FIFO Qdisc.
This choice provides two benefits. First, contention on the HTB/FQ Qdisc
lock is significantly reduced since fewer CPUs contend for the same queue.
More importantly, Qdisc contention can be eliminated completely if each
CPU has its own FIFO Qdisc for the second kind of pods.
There must be a mechanism in place to support classifying traffic based on
pods/container to different Tx queues. Note that clsact is outside of Qdisc
while Qdisc can run a classifier to select a sub-queue under the lock.
In general recording the decision in the skb seems a little heavy handed.
This patch introduces a per-CPU variable, suggested by Eric.
The xmit.skip_txqueue flag is firstly cleared in __dev_queue_xmit().
- Tx Qdisc may install that skbedit actions, then xmit.skip_txqueue flag
is set in qdisc->enqueue() though tx queue has been selected in
netdev_tx_queue_mapping() or netdev_core_pick_tx(). That flag is cleared
firstly in __dev_queue_xmit(), is useful:
- Avoid picking Tx queue with netdev_tx_queue_mapping() in next netdev
in such case: eth0 macvlan - eth0.3 vlan - eth0 ixgbe-phy:
For example, eth0, macvlan in pod, which root Qdisc install skbedit
queue_mapping, send packets to eth0.3, vlan in host. In __dev_queue_xmit() of
eth0.3, clear the flag, does not select tx queue according to skb->queue_mapping
because there is no filters in clsact or tx Qdisc of this netdev.
Same action taked in eth0, ixgbe in Host.
- Avoid picking Tx queue for next packet. If we set xmit.skip_txqueue
in tx Qdisc (qdisc->enqueue()), the proper way to clear it is clearing it
in __dev_queue_xmit when processing next packets.
For performance reasons, use the static key. If user does not config the NET_EGRESS,
the patch will not be compiled.
+----+ +----+ +----+
| P1 | | P2 | | Pn |
+----+ +----+ +----+
| | |
+-----------+-----------+
|
| clsact/skbedit
| MQ
v
+-----------+-----------+
| q0 | q1 | qn
v v v
HTB/FQ HTB/FQ ... FIFO
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Wei Wang <weiwan@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The memory size of ip_vs_conn_tab changed after we use hlist
instead of list.
Fixes: 731109e784 ("ipvs: use hlist instead of list")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In case the checksum calculation is offloaded to the DSA master network
interface, it will include the switch trailing tag. As soon as the switch strips
that tag on egress, the calculated checksum is wrong.
Therefore, add the checksum calculation to the tagger (if required) before
adding the switch tag. This way, the hellcreek code works with all DSA master
interfaces regardless of their declared feature set.
Fixes: 01ef09caad ("net: dsa: Add tag handling for Hirschmann Hellcreek switches")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220415103320.90657-1-kurt@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to properly inform user about relationship between port and
line card, introduce a driver API to set line card for a port. Use this
information to extend port devlink netlink message by line card index
and also include the line card index into phys_port_name and by that
into a netdevice name.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow driver to mark a line card as active. Expose this state to the
userspace over devlink netlink interface with proper notifications.
'active' state means that line card was plugged in after
being provisioned.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to be able to configure all needed stuff on a port/netdevice
of a line card without the line card being present, introduce line card
provisioning. Basically by setting a type, provisioning process will
start and driver is supposed to create a placeholder for instances
(ports/netdevices) for a line card type.
Allow the user to query the supported line card types over line card
get command. Then implement two netlink command SET to allow user to
set/unset the card type.
On the driver API side, add provision/unprovision ops and supported
types array to be advertised. Upon provision op call, the driver should
take care of creating the instances for the particular line card type.
Introduce provision_set/clear() functions to be called by the driver
once the provisioning/unprovisioning is done on its side. These helpers
are not to be called directly due to the async nature of provisioning.
Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
lc 1 state unprovisioned
supported_types:
16x100G
lc 2 state unprovisioned
supported_types:
16x100G
lc 3 state unprovisioned
supported_types:
16x100G
lc 4 state unprovisioned
supported_types:
16x100G
lc 5 state unprovisioned
supported_types:
16x100G
lc 6 state unprovisioned
supported_types:
16x100G
lc 7 state unprovisioned
supported_types:
16x100G
lc 8 state unprovisioned
supported_types:
16x100G
$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4
$ devlink lc set pci/0000:01:00.0 lc 8 notype
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the devlink API so the driver is going to be able to create and
destroy linecard instances. There can be multiple line cards per devlink
device. Expose this new type of object over devlink netlink API to the
userspace, with notifications.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel test robot reported:
smatch warnings:
net/ipv4/tcp_input.c:5966 tcp_rcv_established() warn: unsigned 'reason' is never less than zero.
I actually had one packetdrill failing because of this bug,
and was about to send the fix :)
v2: Andreas Schwab also pointed out that @reason needs to be negated
before we reach tcp_drop_reason()
Fixes: 4b506af9c5 ("tcp: add two drop reasons for tcp_ack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The receiving interface might have used GRO to receive more fragments than
MAX_SKB_FRAGS fragments. In this case, these will not be stored in
skb_shinfo(skb)->frags but merged into the frag list.
batman-adv relies on the function skb_split to split packets up into
multiple smaller packets which are not larger than the MTU on the outgoing
interface. But this function cannot handle frag_list entries and is only
operating on skb_shinfo(skb)->frags. If it is still trying to split such an
skb and xmit'ing it on an interface without support for NETIF_F_FRAGLIST,
then validate_xmit_skb() will try to linearize it. But this fails due to
inconsistent information. And __pskb_pull_tail will trigger a BUG_ON after
skb_copy_bits() returns an error.
In case of entries in frag_list, just linearize the skb before operating on
it with skb_split().
Reported-by: Felix Kaechele <felix@kaechele.ca>
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Felix Kaechele <felix@kaechele.ca>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The first attempt to fix a the 'impossible' WARN_ON_ONCE(1) in
isotp_tx_timer_handler() focussed on the identical CAN IDs created by
the syzbot reproducer and lead to upstream fix/commit 3ea566422c
("can: isotp: sanitize CAN ID checks in isotp_bind()"). But this did
not catch the root cause of the wrong tx.state in the tx_timer handler.
In the isotp 'first frame' case a timeout monitoring needs to be started
before the 'first frame' is send. But when this sending failed the timeout
monitoring for this specific frame has to be disabled too.
Otherwise the tx_timer is fired with the 'warn me' tx.state of ISOTP_IDLE.
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20220405175112.2682-1-socketcan@hartkopp.net
Reported-by: syzbot+2339c27f5c66c652843e@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
packets in OFO queue might be redundant, and dropped.
tcp_drop() is no longer needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) A valid RST packet should be consumed, to not confuse drop monitor.
2) Same remark for packet validating cross syn setup,
even if we might ignore part of it.
3) When third packet of 3WHS is delayed, do not pretend
the SYNACK was dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add one reason for packets dropped from OFO queue because
of memory pressure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TCP_TOO_OLD_ACK and TCP_ACK_UNSENT_DATA drop
reasons so that tcp_rcv_established() can report
them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic support for drop reasons in tcp_rcv_state_process()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_rcv_state_process() incorrectly drops packets
instead of consuming it, making drop monitor very noisy,
if not unusable.
Calling tcp_time_wait() or tcp_done() is part
of standard behavior, packets triggering these actions
were not dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Creates four new drop reasons for the following cases:
1) packet being rejected by RFC 7323 PAWS check
2) packet being rejected by SEQUENCE check
3) Invalid RST packet
4) Invalid SYN packet
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Small cleanup in tcp_validate_incoming(), no need for rst_seq_match
setting and testing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever tcp_validate_incoming() handles a valid RST packet,
we should not pretend the packet was dropped.
Create a special section at the end of tcp_validate_incoming()
to handle this case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reads and Writes to ip6_rt_gc_expire always have been racy,
as syzbot reported lately [1]
There is a possible risk of under-flow, leading
to unexpected high value passed to fib6_run_gc(),
although I have not observed this in the field.
Hosts hitting ip6_dst_gc() very hard are under pretty bad
state anyway.
[1]
BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc
read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1:
ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
dst_alloc+0x9b/0x160 net/core/dst.c:86
ip6_dst_alloc net/ipv6/route.c:344 [inline]
icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
mld_send_cr net/ipv6/mcast.c:2119 [inline]
mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0:
ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
dst_alloc+0x9b/0x160 net/core/dst.c:86
ip6_dst_alloc net/ipv6/route.c:344 [inline]
icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
mld_send_cr net/ipv6/mcast.c:2119 [inline]
mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
value changed: 0x00000bb3 -> 0x00000ba9
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido reported that the commit referenced in the Fixes tag broke
a gre use case with dummy devices. Add a check to ip_tunnel_init_flow
to see if the oif is an l3mdev port and if so set the oif to 0 to
avoid the oif comparison in fib_lookup_good_nhc.
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While investigating a related syzbot report,
I found that whenever call to tcf_exts_init()
from u32_init_knode() is failing, we end up
with an elevated refcount on ht->refcnt
To avoid that, only increase the refcount after
all possible errors have been evaluated.
Fixes: b9a24bb76b ("net_sched: properly handle failure case of tcf_exts_init()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
