[Why]
Find out that when we are registering vertical interrupt0, we get
DC_IRQ_SOURCE_INVALID when call dc_interrupt_to_irq_source for
DCN_1_0__SRCID__OTG6_VERTICAL_INTERRUPT0_CONTROL.
After analyzing, it's due to the defined value for
DCN_1_0__SRCID__OTG6_VERTICAL_INTERRUPT0_CONTROL is not
(DCN_1_0__SRCID__OTG5_VERTICAL_INTERRUPT0_CONTROL + 1). It's not
incremental sequence.
[How]
Use an array to record all vertical interrupt0 SRCID. While registering
interrupt, use an incremental index to visit the array to get the right
SRCID to register.
Also add error handling to avoid potential pointer problem.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since this is a "revert of a revert", the end effect is that freesync
video is back to its original state, the way it was before the first
revert.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When driver disabled, we driver force the YCbCr420 to RGB,
which means some register will be changed, such as
RDPCS_PHY_DP_MPLLB_TX_CLK_DIV changed from 1 to 0
When driver re-enabled, OS will Set Mode YCbCr420 again,
which means the register RDPCS_PHY_DP_MPLLB_TX_CLK_DIV
should to be 1 again, but dmub fw can’t update the
register to 1 due to the mpll is not off
[How]
Adds an interface to disable accelerated mode bit,
which allows DM to decide to call during driver
disable/unload scenarios.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
* Add debug out when viewport too small
* use max lb for latency hiding
* System black screen hangs on driver load
* Fix UBSAN warning for not a valid value for type '_Bool'
* Fix for outbox1 ring buffer typecasting issue
* Bypass sink detect when there are no eDPs connected
* Increase precision for bpp in DSC calculations
* Add changes for dsc bpp in 16ths and unify bw calculations
* Correct algorithm for reversed gamma
* Remove MPC gamut remap logic for DCN30
* Fix typo for helpers function name
* Fix secure display lock problems
* Fix no previous prototype warning
* Separate caps for maximum RGB and YUV plane counts
* Add debugfs to control DMUB trace buffer events
* [FW Promotion] Release 0.0.56
* DCHUB underflow counter increasing in some scenarios
* fix dml prefetch validation
* fix dcn3+ bw validation soc param update sequence
* add a func to disable accelerated mode
* Fix potential memory leak
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When unplugging a display, the underflow counter can be seen to
increase because PSTATE switch is allowed even when some planes are not
blanked.
[How]
Check that all planes are not active instead of all streams before
allowing PSTATE change.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Received compiling warning:
All warnings (new ones prefixed by >>):
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5574:5:
warning: no previous prototype for 'amdgpu_dm_crtc_late_register'
[-Wmissing-prototypes]
5574 | int amdgpu_dm_crtc_late_register(struct drm_crtc *crtc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In
function 'dm_update_mst_vcpi_slots_for_dsc':
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6405:46:
warning: variable 'old_con_state' set but not used
[-Wunused-but-set-variable]
6405 | struct drm_connector_state *new_con_state, *old_con_state;
| ^~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In
function 'amdgpu_dm_commit_cursors':
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8006:44:
warning: variable 'new_plane_state' set but not used
[-Wunused-but-set-variable]
8006 | struct drm_plane_state *old_plane_state, *new_plane_state;
| ^~~~~~~~~~~~~~~
vim +/amdgpu_dm_crtc_late_register +5574
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c
5572
5573 #ifdef CONFIG_DRM_AMD_SECURE_DISPLAY
> 5574 int amdgpu_dm_crtc_late_register(struct drm_crtc *crtc)
5575 {
5576 crtc_debugfs_init(crtc);
5577
5578 return 0;
5579 }
5580 #endif
5581
[How]
Fix it with declaration as "static"
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Find out few locks problems while doing secure display. They are
following few parts:
1. crc_rd_work_lock in amdgpu_dm_crtc_handle_crc_window_irq() should
also use spin_lock_irqsave instead of spin_lock_irq.
2. In crc_win_update_set(), crc_rd_work_lock should be grabbed after
obtaining lock event_lock. Otherwise, will cause deadlock by conflicting
the lock order in amdgpu_dm_crtc_handle_crc_window_irq()
3. flush_work() in crc_win_update_set() is no need and will cause
deadlock since amdgpu_dm_crtc_notify_ta_to_read() also tries to grab
lock crc_rd_work_lock.
[How]
Fix above problems.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Solomon Chiu <Solomon.Chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why?]
Some code still expected bpp to be used in whole bits, not 16ths. dsc.c uses
redundant function now found in dc to calculate stream bandwidth from timing.
[How?]
Fix code to work with 16ths instead of whole bits for dsc bpp.
Refactor get_dsc_bandwidth to accept inputs in 16ths of a bit.
Use dc function to calculate bandwidth from timing, and make dsc bw calculation
a part of dsc.c.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable max memory lb config to improve stutter efficiency and
latency hiding. Also increase max number of lb lines to be
used by dml since experiments have shown that there isnt a hard max
beyond what fits in lb.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable result is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
the dcn301_calculate_wm_and_dl() calculation exposed a issue
- switch to dcn30 version for now.
still need to follow up with dcn301 watermark updates version.
v2: squash in warning fix
Signed-off-by: Charles Sun <charles.sun@amd.com>
Reviewed-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Charles Sun <charles.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
CONFIG_DRM_AMD_DC_DCN3_0 has been folded into
CONFIG_DRM_AMD_DC_DCN and is not needed.
[How]
Drop CONFIG_DRM_AMD_DC_DCN3_0.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC needs to communicate with PM FW through GPU memory. In order
to do so we need to be able to allocate memory from within DC.
[How]
Call amdgpu_bo_create_kernel to allocate GPU memory and use a
list in amdgpu_display_manager to track our allocations so we
can clean them up later.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DGPU Navi, the wm_table.nv_entries are used. These entires are not
populated for DCN301 Vangogh APU, but instead wm_table.entries are.
[How]
Use DCN21 Renoir style wm calculations.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'dce110_resource.h' included in 'dcn21_resource.c' is duplicated.
'hw_gpio.h' included in 'hw_factory_dce110.c' is duplicated.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'drm/drm_hdcp.h' included in 'amdgpu_dm.c' is duplicated.
It is also included in the 79th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The registers for the address of the cursor are aligned to 2KB, so all
cursor surfaces also need to be aligned to 2KB. Currently, the
provided cursor cache surface is not aligned, so we need a workaround
until alignment is enforced by the surface provider.
[How]
- round up surface address to nearest multiple of 2048
- current policy is to provide a much bigger cache size than
necessary,so this operation is safe
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Panel control always programs instance 0. With multi eDP we need to
support multiple instances.
[How]
Use link index to set different instances for panel control.
Refactored LVTMA control to support multiple instances.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver get wrap around dmub trace data due to read pointer being
increased incorrectly when there are multiple interrupt
queues with very short interval
[How]
Check read/write pointer before copying data from ring buffer
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If interval of two interrupt from dmub outbox0 is too short,
some event might be skipped
[How]
Compare read pointer and write pointer until all the event
entry is processed
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
pflip interrupt would not be enabled promptly if a pipe is disabled
and re-enabled, causing flip_done timeout error during DP
compliance tests
[How]
Enable pflip interrupt upon pipe enablement
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In some boot configurations we need to retrieve the currently
UEFI-set dppclk, but there was a typo in the calculation
[how]
Fix typo to make dpp_clk calculate off dpp_clk divider instead of
disp_clk
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On baco-enabled systems running virtual dal, can get set power
state when hw is not initialized
[How]
Skip DC hw part of setPowerState when hw not available
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Ported logic from dcn21 for reading in pipe fusing to dcn30.
Supported configurations are 1 and 6 pipes. Invalid fusing
will revert to 1 pipe being enabled.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
