Commit Graph

71 Commits

Author SHA1 Message Date
Rob Gill
67c20de35a net: Add MODULE_DESCRIPTION entries to network modules
The user tool modinfo is used to get information on kernel modules, including a
description where it is available.

This patch adds a brief MODULE_DESCRIPTION to the following modules:

9p
drop_monitor
esp4_offload
esp6_offload
fou
fou6
ila
sch_fq
sch_fq_codel
sch_hhf

Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20 21:33:57 -07:00
Eric Dumazet
39d010504e net_sched: sch_fq: add horizon attribute
QUIC servers would like to use SO_TXTIME, without having CAP_NET_ADMIN,
to efficiently pace UDP packets.

As far as sch_fq is concerned, we need to add safety checks, so
that a buggy application does not fill the qdisc with packets
having delivery time far in the future.

This patch adds a configurable horizon (default: 10 seconds),
and a configurable policy when a packet is beyond the horizon
at enqueue() time:
- either drop the packet (default policy)
- or cap its delivery time to the horizon.

$ tc -s -d qd sh dev eth0
qdisc fq 8022: root refcnt 257 limit 10000p flow_limit 100p buckets 1024
 orphan_mask 1023 quantum 10Kb initial_quantum 51160b low_rate_threshold 550Kbit
 refill_delay 40.0ms timer_slack 10.000us horizon 10.000s
 Sent 1234215879 bytes 837099 pkt (dropped 21, overlimits 0 requeues 6)
 backlog 0b 0p requeues 6
  flows 1191 (inactive 1177 throttled 0)
  gc 0 highprio 0 throttled 692 latency 11.480us
  pkts_too_long 0 alloc_errors 0 horizon_drops 21 horizon_caps 0

v2: fixed an overflow on 32bit kernels in fq_init(), reported
    by kbuild test robot <lkp@intel.com>

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04 11:56:17 -07:00
Eric Dumazet
348e289b0f net_sched: sch_fq: perform a prefetch() earlier
The prefetch() done in fq_dequeue() can be done a bit earlier
after the refactoring of the code done in the prior patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 15:50:45 -07:00
Eric Dumazet
c288b0ca86 net_sched: sch_fq: do not call fq_peek() twice per packet
This refactors the code to not call fq_peek() from fq_dequeue_head()
since the caller can provide the skb.

Also rename fq_dequeue_head() to fq_dequeue_skb() because 'head' is
a bit vague, given the skb could come from t_root rb-tree.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 15:50:45 -07:00
Eric Dumazet
82a0aa53b5 net_sched: sch_fq: use bulk freeing in fq_gc()
fq_gc() already builds a small array of pointers, so using
kmem_cache_free_bulk() needs very little change.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 15:50:31 -07:00
Eric Dumazet
7ba0537c2b net_sched: sch_fq: change fq_flow size/layout
sizeof(struct fq_flow) is 112 bytes on 64bit arches.

This means that half of them use two cache lines, but 50% use
three cache lines.

This patch adds cache line alignment, and makes sure that only
the first cache line is touched by fq_enqueue(), which is more
expensive that fq_dequeue() in general.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 15:50:31 -07:00
Eric Dumazet
dde0a648fc net_sched: sch_fq: avoid touching f->next from fq_gc()
A significant amount of cpu cycles is spent in fq_gc()

When fq_gc() does its lookup in the rb-tree, it needs the
following fields from struct fq_flow :

f->sk       (lookup key in the rb-tree)
f->fq_node  (anchor in the rb-tree)
f->next     (used to determine if the flow is detached)
f->age      (used to determine if the flow is candidate for gc)

This unfortunately spans two cache lines (assuming 64 bytes cache lines)

We can avoid using f->next, if we use the low order bit of f->{age|tail}

This low order bit is 0, if f->tail points to an sk_buff.
We set the low order bit to 1, if the union contains a jiffies value.

Combined with the following patch, this makes sure we only need
to bring into cpu caches one cache line per flow.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-03 15:50:31 -07:00
Eric Dumazet
583396f4ca net_sched: sch_fq: enable use of hrtimer slack
Add a new attribute to control the fq qdisc hrtimer slack.

Default is set to 10 usec.

When/if packets are throttled, fq set up an hrtimer that can
lead to one interrupt per packet in the throttled queue.

By using a timer slack, we allow better use of timer interrupts,
by giving them a chance to call multiple timer callbacks
at each hardware interrupt.

Also, giving a slack allows FQ to dequeue batches of packets
instead of a single one, thus increasing xmit_more efficiency.

This has no negative effect on the rate a TCP flow can sustain,
since each TCP flow maintains its own precise vtime (tp->tcp_wstamp_ns)

v2: added strict netlink checking (as feedback from Jakub Kicinski)

Tested:
 1000 concurrent flows all using paced packets.
 1,000,000 packets sent per second.

Before the patch :

$ vmstat 2 10
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa st
 0  0      0 60726784  23628 3485992    0    0   138     1  977  535  0 12 87  0  0
 0  0      0 60714700  23628 3485628    0    0     0     0 1568827 26462  0 22 78  0  0
 1  0      0 60716012  23628 3485656    0    0     0     0 1570034 26216  0 22 78  0  0
 0  0      0 60722420  23628 3485492    0    0     0     0 1567230 26424  0 22 78  0  0
 0  0      0 60727484  23628 3485556    0    0     0     0 1568220 26200  0 22 78  0  0
 2  0      0 60718900  23628 3485380    0    0     0    40 1564721 26630  0 22 78  0  0
 2  0      0 60718096  23628 3485332    0    0     0     0 1562593 26432  0 22 78  0  0
 0  0      0 60719608  23628 3485064    0    0     0     0 1563806 26238  0 22 78  0  0
 1  0      0 60722876  23628 3485236    0    0     0   130 1565874 26566  0 22 78  0  0
 1  0      0 60722752  23628 3484908    0    0     0     0 1567646 26247  0 22 78  0  0

After the patch, slack of 10 usec, we can see a reduction of interrupts
per second, and a small decrease of reported cpu usage.

$ vmstat 2 10
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa st
 1  0      0 60722564  23628 3484728    0    0   133     1  696  545  0 13 87  0  0
 1  0      0 60722568  23628 3484824    0    0     0     0 977278 25469  0 20 80  0  0
 0  0      0 60716396  23628 3484764    0    0     0     0 979997 25326  0 20 80  0  0
 0  0      0 60713844  23628 3484960    0    0     0     0 981394 25249  0 20 80  0  0
 2  0      0 60720468  23628 3484916    0    0     0     0 982860 25062  0 20 80  0  0
 1  0      0 60721236  23628 3484856    0    0     0     0 982867 25100  0 20 80  0  0
 1  0      0 60722400  23628 3484456    0    0     0     8 982698 25303  0 20 80  0  0
 0  0      0 60715396  23628 3484428    0    0     0     0 981777 25176  0 20 80  0  0
 0  0      0 60716520  23628 3486544    0    0     0    36 978965 27857  0 21 79  0  0
 0  0      0 60719592  23628 3486516    0    0     0    22 977318 25106  0 20 80  0  0

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17 21:16:35 -07:00
Jakub Kicinski
7e6dc03eeb net: fq: add missing attribute validation for orphan mask
Add missing attribute validation for TCA_FQ_ORPHAN_MASK
to the netlink policy.

Fixes: 06eb395fa9 ("pkt_sched: fq: better control of DDOS traffic")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 13:28:48 -08:00
Eric Dumazet
d9e15a2733 pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
As diagnosed by Florian :

If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :

if (f->credit <= 0) {
  f->credit += q->quantum;
  goto begin;
}

... because f->credit is either 0 or -2147483648.

Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.

Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Florian Westphal <fw@strlen.de>
Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-08 12:40:47 -08:00
Eric Dumazet
bb3d0b8bf5 net_sched: sch_fq: properly set sk->sk_pacing_status
If fq_classify() recycles a struct fq_flow because
a socket structure has been reallocated, we do not
set sk->sk_pacing_status immediately, but later if the
flow becomes detached.

This means that any flow requiring pacing (BBR, or SO_MAX_PACING_RATE)
might fallback to TCP internal pacing, which requires a per-socket
high resolution timer, and therefore more cpu cycles.

Fixes: 218af599fa ("tcp: internal implementation for pacing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26 15:35:09 -08:00
Eric Dumazet
e9c43add67 net_sched: sch_fq: remove one obsolete check in fq_dequeue()
After commit eeb84aa0d0 ("net_sched: sch_fq: do not assume EDT
packets are ordered"), all skbs get a non zero time_to_send
in flow_queue_add()

This means @time_next_packet variable in fq_dequeue()
can no longer be zero.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15 20:19:20 -07:00
Thomas Gleixner
2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Eric Dumazet
37c0aead79 net_sched: sch_fq: handle non connected flows
FQ packet scheduler assumed that packets could be classified
based on their owning socket.

This means that if a UDP server uses one UDP socket to send
packets to different destinations, packets all land
in one FQ flow.

This is unfair, since each TCP flow has a unique bucket, meaning
that in case of pressure (fully utilised uplink), TCP flows
have more share of the bandwidth.

If we instead detect unconnected sockets, we can use a stochastic
hash based on the 4-tuple hash.

This also means a QUIC server using one UDP socket will properly
spread the outgoing packets to different buckets, and in-kernel
pacing based on EDT model will no longer risk having big rb-tree on
one flow.

Note that UDP application might provide the skb->hash in an
ancillary message at sendmsg() time to avoid the cost of a dissection
in fq packet scheduler.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:09:25 -07:00
Eric Dumazet
eeb84aa0d0 net_sched: sch_fq: do not assume EDT packets are ordered
TCP stack makes sure packets for a given flow are monotically
increasing, but we want to allow UDP packets to use EDT as
well, so that QUIC servers can use in-kernel pacing.

This patch adds a per-flow rb-tree on which packets might
be stored. We still try to use the linear list for the
typical cases where packets are queued with monotically
increasing skb->tstamp, since queue/dequeue packets on
a standard list is O(1).

Note that the ability to store packets in arbitrary EDT
order will allow us to implement later a per TCP socket
mechanism adding delays (with jitter eventually) and reorders,
to implement convenient network emulators.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07 12:09:25 -07:00
Johannes Berg
8cb081746c netlink: make validation more configurable for future strictness
We currently have two levels of strict validation:

 1) liberal (default)
     - undefined (type >= max) & NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted
     - garbage at end of message accepted
 2) strict (opt-in)
     - NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted

Split out parsing strictness into four different options:
 * TRAILING     - check that there's no trailing data after parsing
                  attributes (in message or nested)
 * MAXTYPE      - reject attrs > max known type
 * UNSPEC       - reject attributes with NLA_UNSPEC policy entries
 * STRICT_ATTRS - strictly validate attribute size

The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().

Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.

We end up with the following renames:
 * nla_parse           -> nla_parse_deprecated
 * nla_parse_strict    -> nla_parse_deprecated_strict
 * nlmsg_parse         -> nlmsg_parse_deprecated
 * nlmsg_parse_strict  -> nlmsg_parse_deprecated_strict
 * nla_parse_nested    -> nla_parse_nested_deprecated
 * nla_validate_nested -> nla_validate_nested_deprecated

Using spatch, of course:
    @@
    expression TB, MAX, HEAD, LEN, POL, EXT;
    @@
    -nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
    +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression TB, MAX, NLA, POL, EXT;
    @@
    -nla_parse_nested(TB, MAX, NLA, POL, EXT)
    +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)

    @@
    expression START, MAX, POL, EXT;
    @@
    -nla_validate_nested(START, MAX, POL, EXT)
    +nla_validate_nested_deprecated(START, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, MAX, POL, EXT;
    @@
    -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
    +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)

For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.

Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.

Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.

In effect then, this adds fully strict validation for any new command.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:07:21 -04:00
Michal Kubecek
ae0be8de9a netlink: make nla_nest_start() add NLA_F_NESTED flag
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.

Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().

Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:

@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)

@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27 17:03:44 -04:00
Eric Dumazet
6b015a523f net_sched: sch_fq: avoid calling ktime_get_ns() if not needed
There are two cases were we can avoid calling ktime_get_ns() :

1) Queue is empty.
2) Internal queue is not empty.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20 09:51:32 -08:00
David S. Miller
f2be6d710d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-11-19 10:55:00 -08:00
Eric Dumazet
08e14fe429 net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows
When EDT conversion happened, fq lost the ability to enfore a maxrate
for all flows. It kept it for non EDT flows.

This commit restores the functionality.

Tested:

tc qd replace dev eth0 root fq maxrate 500Mbit
netperf -P0 -H host -- -O THROUGHPUT
489.75

Fixes: ab408b6dc7 ("tcp: switch tcp and sch_fq to new earliest departure time model")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15 11:42:12 -08:00
Eric Dumazet
48872c11b7 net_sched: sch_fq: add dctcp-like marking
Similar to 80ba92fa1a ("codel: add ce_threshold attribute")

After EDT adoption, it became easier to implement DCTCP-like CE marking.

In many cases, queues are not building in the network fabric but on
the hosts themselves.

If packets leaving fq missed their Earliest Departure Time by XXX usec,
we mark them with ECN CE. This gives a feedback (after one RTT) to
the sender to slow down and find better operating mode.

Example :

tc qd replace dev eth0 root fq ce_threshold 2.5ms

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11 13:59:21 -08:00
Eric Dumazet
7baf33bdac net_sched: sch_fq: no longer use skb_is_tcp_pure_ack()
With the new EDT model, sch_fq no longer has to special
case TCP pure acks, since their skb->tstamp will allow them
being sent without pacing delay.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
76a9ebe811 net: extend sk_pacing_rate to unsigned long
sk_pacing_rate has beed introduced as a u32 field in 2013,
effectively limiting per flow pacing to 34Gbit.

We believe it is time to allow TCP to pace high speed flows
on 64bit hosts, as we now can reach 100Gbit on one TCP flow.

This patch adds no cost for 32bit kernels.

The tcpi_pacing_rate and tcpi_max_pacing_rate were already
exported as 64bit, so iproute2/ss command require no changes.

Unfortunately the SO_MAX_PACING_RATE socket option will stay
32bit and we will need to add a new option to let applications
control high pacing rates.

State      Recv-Q Send-Q Local Address:Port             Peer Address:Port
ESTAB      0      1787144  10.246.9.76:49992             10.246.9.77:36741
                 timer:(on,003ms,0) ino:91863 sk:2 <->
 skmem:(r0,rb540000,t66440,tb2363904,f605944,w1822984,o0,bl0,d0)
 ts sack bbr wscale:8,8 rto:201 rtt:0.057/0.006 mss:1448
 rcvmss:536 advmss:1448
 cwnd:138 ssthresh:178 bytes_acked:256699822585 segs_out:177279177
 segs_in:3916318 data_segs_out:177279175
 bbr:(bw:31276.8Mbps,mrtt:0,pacing_gain:1.25,cwnd_gain:2)
 send 28045.5Mbps lastrcv:73333
 pacing_rate 38705.0Mbps delivery_rate 22997.6Mbps
 busy:73333ms unacked:135 retrans:0/157 rcv_space:14480
 notsent:2085120 minrtt:0.013

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15 22:56:42 -07:00
Eric Dumazet
fb420d5d91 tcp/fq: move back to CLOCK_MONOTONIC
In the recent TCP/EDT patch series, I switched TCP and sch_fq
clocks from MONOTONIC to TAI, in order to meet the choice done
earlier for sch_etf packet scheduler.

But sure enough, this broke some setups were the TAI clock
jumps forward (by almost 50 year...), as reported
by Leonard Crestez.

If we want to converge later, we'll probably need to add
an skb field to differentiate the clock bases, or a socket option.

In the meantime, an UDP application will need to use CLOCK_MONOTONIC
base for its SCM_TXTIME timestamps if using fq packet scheduler.

Fixes: 72b0094f91 ("tcp: switch tcp_clock_ns() to CLOCK_TAI base")
Fixes: 142537e419 ("net_sched: sch_fq: switch to CLOCK_TAI")
Fixes: fd2bca2aa7 ("tcp: switch internal pacing timer to CLOCK_TAI")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01 23:18:51 -07:00
Eric Dumazet
90caf67b01 net_sched: sch_fq: remove dead code dealing with retransmits
With the earliest departure time model, we no longer plan
special casing TCP retransmits. We therefore remove dead
code (since most compilers understood skb_is_retransmit()
was false)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 19:38:00 -07:00
Eric Dumazet
ab408b6dc7 tcp: switch tcp and sch_fq to new earliest departure time model
TCP keeps track of tcp_wstamp_ns by itself, meaning sch_fq
no longer has to do it.

Thanks to this model, TCP can get more accurate RTT samples,
since pacing no longer inflates them.

This has the nice effect of removing some delays caused by FQ
quantum mechanism, causing inflated max/P99 latencies.

Also we might relax TCP Small Queue tight limits in the future,
since this new model allow TCP to build bigger batches, since
sch_fq (or a device with earliest departure time offload) ensure
these packets will be delivered on time.

Note that other protocols are not converted (they will probably
never be) so sch_fq has still support for SO_MAX_PACING_RATE

Tested:

Test showing FQ pacing quantum artifact for low-rate flows,
adding unexpected throttles for RPC flows, inflating max and P99 latencies.

The parameters chosen here are to show what happens typically when
a TCP flow has a reduced pacing rate (this can be caused by a reduced
cwin after few losses, or/and rtt above few ms)

MIBS="MIN_LATENCY,MEAN_LATENCY,MAX_LATENCY,P99_LATENCY,STDDEV_LATENCY"
Before :
$ netperf -H 10.246.7.133 -t TCP_RR -Cc -T6,6 -- -q 2000000 -r 100,100 -o $MIBS
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.133 () port 0 AF_INET : first burst 0 : cpu bind
 Minimum Latency Microseconds,Mean Latency Microseconds,Maximum Latency Microseconds,99th Percentile Latency Microseconds,Stddev Latency Microseconds
19,82.78,5279,3825,482.02

After :
$ netperf -H 10.246.7.133 -t TCP_RR -Cc -T6,6 -- -q 2000000 -r 100,100 -o $MIBS
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.133 () port 0 AF_INET : first burst 0 : cpu bind
Minimum Latency Microseconds,Mean Latency Microseconds,Maximum Latency Microseconds,99th Percentile Latency Microseconds,Stddev Latency Microseconds
20,49.94,128,63,3.18

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 19:38:00 -07:00
Eric Dumazet
142537e419 net_sched: sch_fq: switch to CLOCK_TAI
TCP will soon provide per skb->tstamp with earliest departure time,
so that sch_fq does not have to determine departure time by looking
at socket sk_pacing_rate.

We chose in linux-4.19 CLOCK_TAI as the clock base for transports,
qdiscs, and NIC offloads.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 19:37:59 -07:00
David S. Miller
a8305bff68 net: Add and use skb_mark_not_on_list().
An SKB is not on a list if skb->next is NULL.

Codify this convention into a helper function and use it
where we are dequeueing an SKB and need to mark it as such.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10 10:06:54 -07:00
Eric Dumazet
7df40c2673 net_sched: fq: take care of throttled flows before reuse
Normally, a socket can not be freed/reused unless all its TX packets
left qdisc and were TX-completed. However connect(AF_UNSPEC) allows
this to happen.

With commit fc59d5bdf1 ("pkt_sched: fq: clear time_next_packet for
reused flows") we cleared f->time_next_packet but took no special
action if the flow was still in the throttled rb-tree.

Since f->time_next_packet is the key used in the rb-tree searches,
blindly clearing it might break rb-tree integrity. We need to make
sure the flow is no longer in the rb-tree to avoid this problem.

Fixes: fc59d5bdf1 ("pkt_sched: fq: clear time_next_packet for reused flows")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02 16:37:38 -04:00
Alexander Aring
2030721cc0 net: sched: sch: add extack for change qdisc ops
This patch adds extack support for change callback for qdisc ops
structtur to prepare per-qdisc specific changes for extack.

Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 12:32:50 -05:00
Alexander Aring
e63d7dfd2d net: sched: sch: add extack for init callback
This patch adds extack support for init callback to prepare per-qdisc
specific changes for extack.

Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 12:32:50 -05:00
Michal Hocko
dcda9b0471 mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator.  This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER.  It has been always
ignored for smaller sizes.  This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.

Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic.  Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success.  This will work independent of the order and overrides the
default allocator behavior.  Page allocator users have several levels of
guarantee vs.  cost options (take GFP_KERNEL as an example)

 - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
   attempt to free memory at all. The most light weight mode which even
   doesn't kick the background reclaim. Should be used carefully because
   it might deplete the memory and the next user might hit the more
   aggressive reclaim

 - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
   allocation without any attempt to free memory from the current
   context but can wake kswapd to reclaim memory if the zone is below
   the low watermark. Can be used from either atomic contexts or when
   the request is a performance optimization and there is another
   fallback for a slow path.

 - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
   non sleeping allocation with an expensive fallback so it can access
   some portion of memory reserves. Usually used from interrupt/bh
   context with an expensive slow path fallback.

 - GFP_KERNEL - both background and direct reclaim are allowed and the
   _default_ page allocator behavior is used. That means that !costly
   allocation requests are basically nofail but there is no guarantee of
   that behavior so failures have to be checked properly by callers
   (e.g. OOM killer victim is allowed to fail currently).

 - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
   and all allocation requests fail early rather than cause disruptive
   reclaim (one round of reclaim in this implementation). The OOM killer
   is not invoked.

 - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
   behavior and all allocation requests try really hard. The request
   will fail if the reclaim cannot make any progress. The OOM killer
   won't be triggered.

 - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
   and all allocation requests will loop endlessly until they succeed.
   This might be really dangerous especially for larger orders.

Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic.  No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.

This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.

[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
  Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
  Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Eric Dumazet
218af599fa tcp: internal implementation for pacing
BBR congestion control depends on pacing, and pacing is
currently handled by sch_fq packet scheduler for performance reasons,
and also because implemening pacing with FQ was convenient to truly
avoid bursts.

However there are many cases where this packet scheduler constraint
is not practical.
- Many linux hosts are not focusing on handling thousands of TCP
  flows in the most efficient way.
- Some routers use fq_codel or other AQM, but still would like
  to use BBR for the few TCP flows they initiate/terminate.

This patch implements an automatic fallback to internal pacing.

Pacing is requested either by BBR or use of SO_MAX_PACING_RATE option.

If sch_fq happens to be in the egress path, pacing is delegated to
the qdisc, otherwise pacing is done by TCP itself.

One advantage of pacing from TCP stack is to get more precise rtt
estimations, and less work done from TX completion, since TCP Small
queue limits are not generally hit. Setups with single TX queue but
many cpus might even benefit from this.

Note that unlike sch_fq, we do not take into account header sizes.
Taking care of these headers would add additional complexity for
no practical differences in behavior.

Some performance numbers using 800 TCP_STREAM flows rate limited to
~48 Mbit per second on 40Gbit NIC.

If MQ+pfifo_fast is used on the NIC :

$ sar -n DEV 1 5 | grep eth
14:48:44         eth0 725743.00 2932134.00  46776.76 4335184.68      0.00      0.00      1.00
14:48:45         eth0 725349.00 2932112.00  46751.86 4335158.90      0.00      0.00      0.00
14:48:46         eth0 725101.00 2931153.00  46735.07 4333748.63      0.00      0.00      0.00
14:48:47         eth0 725099.00 2931161.00  46735.11 4333760.44      0.00      0.00      1.00
14:48:48         eth0 725160.00 2931731.00  46738.88 4334606.07      0.00      0.00      0.00
Average:         eth0 725290.40 2931658.20  46747.54 4334491.74      0.00      0.00      0.40
$ vmstat 1 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa st
 4  0      0 259825920  45644 2708324    0    0    21     2  247   98  0  0 100  0  0
 4  0      0 259823744  45644 2708356    0    0     0     0 2400825 159843  0 19 81  0  0
 0  0      0 259824208  45644 2708072    0    0     0     0 2407351 159929  0 19 81  0  0
 1  0      0 259824592  45644 2708128    0    0     0     0 2405183 160386  0 19 80  0  0
 1  0      0 259824272  45644 2707868    0    0     0    32 2396361 158037  0 19 81  0  0

Now use MQ+FQ :

lpaa23:~# echo fq >/proc/sys/net/core/default_qdisc
lpaa23:~# tc qdisc replace dev eth0 root mq

$ sar -n DEV 1 5 | grep eth
14:49:57         eth0 678614.00 2727930.00  43739.13 4033279.14      0.00      0.00      0.00
14:49:58         eth0 677620.00 2723971.00  43674.69 4027429.62      0.00      0.00      1.00
14:49:59         eth0 676396.00 2719050.00  43596.83 4020125.02      0.00      0.00      0.00
14:50:00         eth0 675197.00 2714173.00  43518.62 4012938.90      0.00      0.00      1.00
14:50:01         eth0 676388.00 2719063.00  43595.47 4020171.64      0.00      0.00      0.00
Average:         eth0 676843.00 2720837.40  43624.95 4022788.86      0.00      0.00      0.40
$ vmstat 1 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa st
 2  0      0 259832240  46008 2710912    0    0    21     2  223  192  0  1 99  0  0
 1  0      0 259832896  46008 2710744    0    0     0     0 1702206 198078  0 17 82  0  0
 0  0      0 259830272  46008 2710596    0    0     0     0 1696340 197756  1 17 83  0  0
 4  0      0 259829168  46024 2710584    0    0    16     0 1688472 197158  1 17 82  0  0
 3  0      0 259830224  46024 2710408    0    0     0     0 1692450 197212  0 18 82  0  0

As expected, number of interrupts per second is very different.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Van Jacobson <vanj@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16 15:43:31 -04:00
Michal Hocko
da6bc57a8f net: use kvmalloc with __GFP_REPEAT rather than open coded variant
fq_alloc_node, alloc_netdev_mqs and netif_alloc* open code kmalloc with
vmalloc fallback.  Use the kvmalloc variant instead.  Keep the
__GFP_REPEAT flag based on explanation from Eric:

 "At the time, tests on the hardware I had in my labs showed that
  vmalloc() could deliver pages spread all over the memory and that was
  a small penalty (once memory is fragmented enough, not at boot time)"

The way how the code is constructed means, however, that we prefer to go
and hit the OOM killer before we fall back to the vmalloc for requests
<=32kB (with 4kB pages) in the current code.  This is rather disruptive
for something that can be achived with the fallback.  On the other hand
__GFP_REPEAT doesn't have any useful semantic for these requests.  So
the effect of this patch is that requests which fit into 32kB will fall
back to vmalloc easier now.

Link: http://lkml.kernel.org/r/20170306103327.2766-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Johannes Berg
fceb6435e8 netlink: pass extended ACK struct to parsing functions
Pass the new extended ACK reporting struct to all of the generic
netlink parsing functions. For now, pass NULL in almost all callers
(except for some in the core.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13 13:58:22 -04:00
Geliang Tang
e124557d60 net_sched: sch_fq: use rb_entry()
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20 14:22:48 -05:00
Eric Dumazet
29c58472ec net_sched: sch_fq: use hash_ptr()
When I wrote sch_fq.c, hash_ptr() on 64bit arches was awful,
and I chose hash_32().

Linus Torvalds and George Spelvin fixed this issue, so we can
use hash_ptr() to get more entropy on 64bit arches with Terabytes
of memory, and avoid the cast games.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17 13:28:56 -05:00
Eric Dumazet
fefa569a9d net_sched: sch_fq: account for schedule/timers drifts
It looks like the following patch can make FQ very precise, even in VM
or stressed hosts. It matters at high pacing rates.

We take into account the difference between the time that was programmed
when last packet was sent, and current time (a drift of tens of usecs is
often observed)

Add an EWMA of the unthrottle latency to help diagnostics.

This latency is the difference between current time and oldest packet in
delayed RB-tree. This accounts for the high resolution timer latency,
but can be different under stress, as fq_check_throttled() can be
opportunistically be called from a dequeue() called after an enqueue()
for a different flow.

Tested:
// Start a 10Gbit flow
$ netperf --google-pacing-rate 1250000000 -H lpaa24 -l 10000 -- -K bbr &

Before patch :
$ sar -n DEV 10 5 | grep eth0 | grep Average
Average:         eth0  17106.04 756876.84   1102.75 1119049.02      0.00      0.00      0.52

After patch :
$ sar -n DEV 10 5 | grep eth0 | grep Average
Average:         eth0  17867.00 800245.90   1151.77 1183172.12      0.00      0.00      0.52

A new iproute2 tc can output the 'unthrottle latency' :

$ tc -s qd sh dev eth0 | grep latency
  0 gc, 0 highprio, 32490767 throttled, 2382 ns latency

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23 07:19:06 -04:00
Eric Dumazet
77879147a3 net_sched: sch_fq: add low_rate_threshold parameter
This commit adds to the fq module a low_rate_threshold parameter to
insert a delay after all packets if the socket requests a pacing rate
below the threshold.

This helps achieve more precise control of the sending rate with
low-rate paths, especially policers. The basic issue is that if a
congestion control module detects a policer at a certain rate, it may
want fq to be able to shape to that policed rate. That way the sender
can avoid policer drops by having the packets arrive at the policer at
or just under the policed rate.

The default threshold of 550Kbps was chosen analytically so that for
policers or links at 500Kbps or 512Kbps fq would very likely invoke
this mechanism, even if the pacing rate was briefly slightly above the
available bandwidth. This value was then empirically validated with
two years of production testing on YouTube video servers.

Signed-off-by: Van Jacobson <vanj@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21 00:23:00 -04:00
Eric Dumazet
695b4ec0f0 pkt_sched: fq: use proper locking in fq_dump_stats()
When fq is used on 32bit kernels, we need to lock the qdisc before
copying 64bit fields.

Otherwise "tc -s qdisc ..." might report bogus values.

Fixes: afe4fd0624 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18 22:15:08 -04:00
Eric Dumazet
520ac30f45 net_sched: drop packets after root qdisc lock is released
Qdisc performance suffers when packets are dropped at enqueue()
time because drops (kfree_skb()) are done while qdisc lock is held,
delaying a dequeue() draining the queue.

Nominal throughput can be reduced by 50 % when this happens,
at a time we would like the dequeue() to proceed as fast as possible.

Even FQ is vulnerable to this problem, while one of FQ goals was
to provide some flow isolation.

This patch adds a 'struct sk_buff **to_free' parameter to all
qdisc->enqueue(), and in qdisc_drop() helper.

I measured a performance increase of up to 12 %, but this patch
is a prereq so that future batches in enqueue() can fly.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25 12:19:35 -04:00
Eric Dumazet
e14ffdfdd6 net_sched: sch_fq: defer skb freeing
Both fq_change() and fq_reset() can use rtnl_kfree_skbs()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet
45f50bed1d net_sched: remove generic throttled management
__QDISC_STATE_THROTTLED bit manipulation is rather expensive
for HTB and few others.

I already removed it for sch_fq in commit f2600cf02b
("net: sched: avoid costly atomic operation in fq_dequeue()")
and so far nobody complained.

When one ore more packets are stuck in one or more throttled
HTB class, a htb dequeue() performs two atomic operations
to clear/set __QDISC_STATE_THROTTLED bit, while root qdisc
lock is held.

Removing this pair of atomic operations bring me a 8 % performance
increase on 200 TCP_RR tests, in presence of throttled classes.

This patch has no side effect, since nothing actually uses
disc_is_throttled() anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 23:58:21 -07:00
WANG Cong
2ccccf5fb4 net_sched: update hierarchical backlog too
When the bottom qdisc decides to, for example, drop some packet,
it calls qdisc_tree_decrease_qlen() to update the queue length
for all its ancestors, we need to update the backlog too to
keep the stats on root qdisc accurate.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29 17:02:33 -05:00
Eric Dumazet
e446f9dfe1 net: synack packets can be attached to request sockets
selinux needs few changes to accommodate fact that SYNACK messages
can be attached to a request socket, lacking sk_security pointer

(Only syncookies are still attached to a TCP_LISTEN socket)

Adds a new sk_listener() helper, and use it in selinux and sch_fq

Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported by: kernel test robot <ying.huang@linux.intel.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11 05:05:06 -07:00
Eric Dumazet
ca6fb06518 tcp: attach SYNACK messages to request sockets instead of listener
If a listen backlog is very big (to avoid syncookies), then
the listener sk->sk_wmem_alloc is the main source of false
sharing, as we need to touch it twice per SYNACK re-transmit
and TX completion.

(One SYN packet takes listener lock once, but up to 6 SYNACK
are generated)

By attaching the skb to the request socket, we remove this
source of contention.

Tested:

 listen(fd, 10485760); // single listener (no SO_REUSEPORT)
 16 RX/TX queue NIC
 Sustain a SYNFLOOD attack of ~320,000 SYN per second,
 Sending ~1,400,000 SYNACK per second.
 Perf profiles now show listener spinlock being next bottleneck.

    20.29%  [kernel]  [k] queued_spin_lock_slowpath
    10.06%  [kernel]  [k] __inet_lookup_established
     5.12%  [kernel]  [k] reqsk_timer_handler
     3.22%  [kernel]  [k] get_next_timer_interrupt
     3.00%  [kernel]  [k] tcp_make_synack
     2.77%  [kernel]  [k] ipt_do_table
     2.70%  [kernel]  [k] run_timer_softirq
     2.50%  [kernel]  [k] ip_finish_output
     2.04%  [kernel]  [k] cascade

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 04:32:43 -07:00
Simon Horman
05e8bb860b pkt_sched: fq: correct spelling of locally
Correct spelling of locally.

Also remove extra space before tab character in struct fq_flow.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01 22:52:29 -04:00
David S. Miller
6e03f896b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/vxlan.c
	drivers/vhost/net.c
	include/linux/if_vlan.h
	net/core/dev.c

The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.

In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.

In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.

In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 14:33:28 -08:00
Eric Dumazet
06eb395fa9 pkt_sched: fq: better control of DDOS traffic
FQ has a fast path for skb attached to a socket, as it does not
have to compute a flow hash. But for other packets, FQ being non
stochastic means that hosts exposed to random Internet traffic
can allocate million of flows structure (104 bytes each) pretty
easily. Not only host can OOM, but lookup in RB trees can take
too much cpu and memory resources.

This patch adds a new attribute, orphan_mask, that is adding
possibility of having a stochastic hash for orphaned skb.

Its default value is 1024 slots, to mimic SFQ behavior.

Note: This does not apply to locally generated TCP traffic,
and no locally generated traffic will share a flow structure
with another perfect or stochastic flow.

This patch also handles the specific case of SYNACK messages:

They are attached to the listener socket, and therefore all map
to a single hash bucket. If listener have set SO_MAX_PACING_RATE,
hoping to have new accepted socket inherit this rate, SYNACK
might be paced and even dropped.

This is very similar to an internal patch Google have used more
than one year.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04 22:15:45 -08:00
Eric Dumazet
9878196578 tcp: do not pace pure ack packets
When we added pacing to TCP, we decided to let sch_fq take care
of actual pacing.

All TCP had to do was to compute sk->pacing_rate using simple formula:

sk->pacing_rate = 2 * cwnd * mss / rtt

It works well for senders (bulk flows), but not very well for receivers
or even RPC :

cwnd on the receiver can be less than 10, rtt can be around 100ms, so we
can end up pacing ACK packets, slowing down the sender.

Really, only the sender should pace, according to its own logic.

Instead of adding a new bit in skb, or call yet another flow
dissection, we tweak skb->truesize to a small value (2), and
we instruct sch_fq to use new helper and not pace pure ack.

Note this also helps TCP small queue, as ack packets present
in qdisc/NIC do not prevent sending a data packet (RPC workload)

This helps to reduce tx completion overhead, ack packets can use regular
sock_wfree() instead of tcp_wfree() which is a bit more expensive.

This has no impact in the case packets are sent to loopback interface,
as we do not coalesce ack packets (were we would detect skb->truesize
lie)

In case netem (with a delay) is used, skb_orphan_partial() also sets
skb->truesize to 1.

This patch is a combination of two patches we used for about one year at
Google.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04 20:36:31 -08:00