The variable "offset" is not needed. Remove it.
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The UDF file-system does not need the 's_dirt' superblock flag because it does
not define the 'write_super()' method. This flag was set to 1 in few places and
set to 0 in '->sync_fs()' and was basically useless. Stop using it because it
is on its way out.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If ext3_setup_super() fails i.e. due to a too-high revision,
the error is logged in dmesg but the fs is not mounted RO as
indicated.
Tested by:
[164152.114551] EXT3-fs (sdb6): error: revision level too high, forcing read-only mode
/dev/sdb6 /mnt/test2 ext3 rw,seclabel,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0
^^
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Jan Kara <jack@suse.cz>
checkpatch.pl warns:
"WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>"
Below patch fixes it.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We already use them for openat() and friends, but fchdir() also wants to
be able to use O_PATH file descriptors. This should make it comparable
to the O_SEARCH of Solaris. In particular, O_PATH allows you to access
(not-quite-open) a directory you don't have read persmission to, only
execute permission.
Noticed during development of multithread support for ksh93.
Reported-by: ольга крыжановская <olga.kryzhanovska@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org # O_PATH introduced in 3.0+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
filesystem. This isn't an urgent fix, but it is simple and the check was
obviously incorrect.
Also fixes a couple important bugs in the eCryptfs miscdev interface. These
changes are low risk due to the small number of users that use the miscdev
interface. I was able to keep the changes minimal and I have some cleaner, more
complete changes queued up for the next merge window that will build on these
patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=TEei
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
"Fixes an incorrect access mode check when preparing to open a file in
the lower filesystem. This isn't an urgent fix, but it is simple and
the check was obviously incorrect.
Also fixes a couple important bugs in the eCryptfs miscdev interface.
These changes are low risk due to the small number of users that use
the miscdev interface. I was able to keep the changes minimal and I
have some cleaner, more complete changes queued up for the next merge
window that will build on these patches."
* tag 'ecryptfs-3.5-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Gracefully refuse miscdev file ops on inherited/passed files
eCryptfs: Fix lockdep warning in miscdev operations
eCryptfs: Properly check for O_RDONLY flag before doing privileged open
File operations on /dev/ecryptfs would BUG() when the operations were
performed by processes other than the process that originally opened the
file. This could happen with open files inherited after fork() or file
descriptors passed through IPC mechanisms. Rather than calling BUG(), an
error code can be safely returned in most situations.
In ecryptfs_miscdev_release(), eCryptfs still needs to handle the
release even if the last file reference is being held by a process that
didn't originally open the file. ecryptfs_find_daemon_by_euid() will not
be successful, so a pointer to the daemon is stored in the file's
private_data. The private_data pointer is initialized when the miscdev
file is opened and only used when the file is released.
https://launchpad.net/bugs/994247
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Pull ocfs2 fixes from Joel Becker.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
aio: make kiocb->private NUll in init_sync_kiocb()
ocfs2: Fix bogus error message from ocfs2_global_read_info
ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed.
ocfs2: use spinlock irqsave for downconvert lock.patch
ocfs2: Misplaced parens in unlikley
ocfs2: clear unaligned io flag when dio fails
Pull cifs fixes from Steve French.
* git://git.samba.org/sfrench/cifs-2.6:
cifs: when server doesn't set CAP_LARGE_READ_X, cap default rsize at MaxBufferSize
cifs: fix parsing of password mount option
Pull btrfs updates from Chris Mason:
"I held off on my rc5 pull because I hit an oops during log recovery
after a crash. I wanted to make sure it wasn't a regression because
we have some logging fixes in here.
It turns out that a commit during the merge window just made it much
more likely to trigger directory logging instead of full commits,
which exposed an old bug.
The new backref walking code got some additional fixes. This should
be the final set of them.
Josef fixed up a corner where our O_DIRECT writes and buffered reads
could expose old file contents (not stale, just not the most recent).
He and Liu Bo fixed crashes during tree log recover as well.
Ilya fixed errors while we resume disk balancing operations on
readonly mounts."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: run delayed directory updates during log replay
Btrfs: hold a ref on the inode during writepages
Btrfs: fix tree log remove space corner case
Btrfs: fix wrong check during log recovery
Btrfs: use _IOR for BTRFS_IOC_SUBVOL_GETFLAGS
Btrfs: resume balance on rw (re)mounts properly
Btrfs: restore restriper state on all mounts
Btrfs: fix dio write vs buffered read race
Btrfs: don't count I/O statistic read errors for missing devices
Btrfs: resolve tree mod log locking issue in btrfs_next_leaf
Btrfs: fix tree mod log rewind of ADD operations
Btrfs: leave critical region in btrfs_find_all_roots as soon as possible
Btrfs: always put insert_ptr modifications into the tree mod log
Btrfs: fix tree mod log for root replacements at leaf level
Btrfs: support root level changes in __resolve_indirect_ref
Btrfs: avoid waiting for delayed refs when we must not
'status' variable in ocfs2_global_read_info() is always != 0 when leaving the
function because it happens to contain number of read bytes. Thus we always log
error message although everything is OK. Since all error cases properly call
mlog_errno() before jumping to out_err, there's no reason to call mlog_errno()
on exit at all. This is a fallout of c1e8d35e (conversion of mlog_exit()
calls).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Hello,
Since ENXIO only means "offset beyond EOF" for SEEK_DATA/SEEK_HOLE,
Hence we should return the internal error unchanged if ocfs2_inode_lock() or
ocfs2_get_clusters_nocache() call failed rather than ENXIO.
Otherwise, it will confuse the user applications when they trying to understand the root cause.
Thanks Dave for pointing this out.
Thanks,
-Jeff
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
When ocfs2dc thread holds dc_task_lock spinlock and receives soft IRQ it
deadlock itself trying to get same spinlock in ocfs2_wake_downconvert_thread.
Below is the stack snippet.
The patch disables interrupts when acquiring dc_task_lock spinlock.
ocfs2_wake_downconvert_thread
ocfs2_rw_unlock
ocfs2_dio_end_io
dio_complete
.....
bio_endio
req_bio_endio
....
scsi_io_completion
blk_done_softirq
__do_softirq
do_softirq
irq_exit
do_IRQ
ocfs2_downconvert_thread
[kthread]
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
The unaligned io flag is set in the kiocb when an unaligned
dio is issued, it should be cleared even when the dio fails,
or it may affect the following io which are using the same
kiocb.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joel Becker <jlbec@evilplan.org>
If the first attempt at opening the lower file read/write fails,
eCryptfs will retry using a privileged kthread. However, the privileged
retry should not happen if the lower file's inode is read-only because a
read/write open will still be unsuccessful.
The check for determining if the open should be retried was intended to
be based on the access mode of the lower file's open flags being
O_RDONLY, but the check was incorrectly performed. This would cause the
open to be retried by the privileged kthread, resulting in a second
failed open of the lower file. This patch corrects the check to
determine if the open request should be handled by the privileged
kthread.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Pull block bits from Jens Axboe:
"As vacation is coming up, thought I'd better get rid of my pending
changes in my for-linus branch for this iteration. It contains:
- Two patches for mtip32xx. Killing a non-compliant sysfs interface
and moving it to debugfs, where it belongs.
- A few patches from Asias. Two legit bug fixes, and one killing an
interface that is no longer in use.
- A patch from Jan, making the annoying partition ioctl warning a bit
less annoying, by restricting it to !CAP_SYS_RAWIO only.
- Three bug fixes for drbd from Lars Ellenberg.
- A fix for an old regression for umem, it hasn't really worked since
the plugging scheme was changed in 3.0.
- A few fixes from Tejun.
- A splice fix from Eric Dumazet, fixing an issue with pipe
resizing."
* 'for-linus' of git://git.kernel.dk/linux-block:
scsi: Silence unnecessary warnings about ioctl to partition
block: Drop dead function blk_abort_queue()
block: Mitigate lock unbalance caused by lock switching
block: Avoid missed wakeup in request waitqueue
umem: fix up unplugging
splice: fix racy pipe->buffers uses
drbd: fix null pointer dereference with on-congestion policy when diskless
drbd: fix list corruption by failing but already aborted reads
drbd: fix access of unallocated pages and kernel panic
xen/blkfront: Add WARN to deal with misbehaving backends.
blkcg: drop local variable @q from blkg_destroy()
mtip32xx: Create debugfs entries for troubleshooting
mtip32xx: Remove 'registers' and 'flags' from sysfs
blkcg: fix blkg_alloc() failure path
block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
block: fix return value on cfq_init() failure
mtip32xx: Remove version.h header file inclusion
xen/blkback: Copy id field when doing BLKIF_DISCARD.
When the server doesn't advertise CAP_LARGE_READ_X, then MS-CIFS states
that you must cap the size of the read at the client's MaxBufferSize.
Unfortunately, testing with many older servers shows that they often
can't service a read larger than their own MaxBufferSize.
Since we can't assume what the server will do in this situation, we must
be conservative here for the default. When the server can't do large
reads, then assume that it can't satisfy any read larger than its
MaxBufferSize either.
Luckily almost all modern servers can do large reads, so this won't
affect them. This is really just for older win9x and OS/2 era servers.
Also, note that this patch just governs the default rsize. The admin can
always override this if he so chooses.
Cc: <stable@vger.kernel.org> # 3.2
Reported-by: David H. Durgee <dhdurgee@acm.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steven French <sfrench@w500smf.(none)>
While we are resolving directory modifications in the
tree log, we are triggering delayed metadata updates to
the filesystem btrees.
This commit forces the delayed updates to run so the
replay code can find any modifications done. It stops
us from crashing because the directory deleltion replay
expects items to be removed immediately from the tree.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
cc: stable@kernel.org
We can race with unlink and not actually be able to do our igrab in
btrfs_add_ordered_extent. This will result in all sorts of problems.
Instead of doing the complicated work to try and handle returning an error
properly from btrfs_add_ordered_extent, just hold a ref to the inode during
writepages. If we cannot grab a ref we know we're freeing this inode anyway
and can just drop the dirty pages on the floor, because screw them we're
going to invalidate them anyway. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The tree log stuff can have allocated space that we end up having split
across a bitmap and a real extent. The free space code does not deal with
this, it assumes that if it finds an extent or bitmap entry that the entire
range must fall within the entry it finds. This isn't necessarily the case,
so rework the remove function so it can handle this case properly. This
fixed two panics the user hit, first in the case where the space was
initially in a bitmap and then in an extent entry, and then the reverse
case. Thanks,
Reported-and-tested-by: Shaun Reich <sreich@kde.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When we're evicting an inode during log recovery, we need to ensure that the inode
is not in orphan state any more, which means inode's run_time flags has _no_
BTRFS_INODE_HAS_ORPHAN_ITEM. Thus, the BUG_ON was triggered because of a wrong
check for the flags.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We used the wrong ioctl macro for the getflags ioctl before.
As we don't have the set/getflags ioctls in the user space ioctl.h
at the moment, it's safe to fix it now.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Alexander Block <ablock84@googlemail.com>
This introduces btrfs_resume_balance_async(), which, given that
restriper state was recovered earlier by btrfs_recover_balance(),
resumes balance in btrfs-balance kthread.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix a bug that triggered asserts in btrfs_balance() in both normal and
resume modes -- restriper state was not properly restored on read-only
mounts. This factors out resuming code from btrfs_restore_balance(),
which is now also called earlier in the mount sequence to avoid the
problem of some early writes getting the old profile.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Miao pointed out there's a problem with mixing dio writes and buffered
reads. If the read happens between us invalidating the page range and
actually locking the extent we can bring in pages into page cache. Then
once the write finishes if somebody tries to read again it will just find
uptodate pages and we'll read stale data. So we need to lock the extent and
check for uptodate bits in the range. If there are uptodate bits we need to
unlock and invalidate again. This will keep this race from happening since
we will hold the extent locked until we create the ordered extent, and then
teh read side always waits for ordered extents. There was also a race in
how we updated i_size, previously we were relying on the generic DIO stuff
to adjust the i_size after the DIO had completed, but this happens outside
of the extent lock which means reads could come in and not see the updated
i_size. So instead move this work into where we create the extents, and
then this way the update ordered i_size stuff works properly in the endio
handlers. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
It is normal behaviour of the low level btrfs function btrfs_map_bio()
to complete a bio with -EIO if the device is missing, instead of just
preventing the bio creation in an earlier step.
This used to cause I/O statistic read error increments and annoying
printk_ratelimited messages. This commit fixes the issue.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reported-by: Carey Underwood <cwillu@cwillu.com>
Pull UDF fixes from Jan Kara:
"Make UDF more robust in presence of corrupted filesystem"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fortify loading of sparing table
udf: Avoid run away loop when partition table length is corrupted
udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()
'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)',
but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=iZTv
-----END PGP SIGNATURE-----
Merge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs
Pull ubi/ubifs fixes from Artem Bityutskiy:
"Fix the debugfs regression - we never enable it because incorrect
'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)',
but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion."
* tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs:
UBI: correct usage of IS_ENABLED()
UBIFS: correct usage of IS_ENABLED()
UBIFS: fix assertion
Check provided length of partition table so that (possibly maliciously)
corrupted partition table cannot cause accessing data beyond current buffer.
Signed-off-by: Jan Kara <jack@suse.cz>
With the tree mod log, we may end up with two roots (the current root and a
rewinded version of it) both pointing to two leaves, l1 and l2, of which l2
had already been cow-ed in the current transaction. If we don't rewind any
tree blocks, we cannot have two roots both pointing to an already cowed tree
block.
Now there is btrfs_next_leaf, which has a leaf locked and wants a lock on
the next (right) leaf. And there is push_leaf_left, which has a (cowed!)
leaf locked and wants a lock on the previous (left) leaf.
In order to solve this dead lock situation, we use try_lock in
btrfs_next_leaf (only in case it's called with a tree mod log time_seq
paramter) and if we fail to get a lock on the next leaf, we give up our lock
on the current leaf and retry from the very beginning.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
When a MOD_LOG_KEY_ADD operation is rewinded, we remove the key from the
tree block. If its not the last key, removal involves a move operation.
This move operation was explicitly done before this commit.
However, at insertion time, there's a move operation before the actual
addition to make room for the new key, which is recorded in the tree mod
log as well. This means, we must drop the move operation when rewinding the
add operation, because the next operation we'll be rewinding will be the
corresponding MOD_LOG_MOVE_KEYS operation.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
When delayed refs exist, btrfs_find_all_roots used to hold the delayed ref
mutex way longer than actually required. We ought to drop it immediately
after we're done collecting all the delayed refs.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Several callers of insert_ptr set the tree_mod_log parameter to 0 to avoid
addition to the tree mod log. In fact, we need all of those operations. This
commit simply removes the additional parameter and makes addition to the
tree mod log unconditional.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
For the tree mod log, we don't log any operations at leaf level. If the root
is at the leaf level (i.e. the tree consists only of the root), then
__tree_mod_log_oldest_root will find a ROOT_REPLACE operation in the log
(because we always log that one no matter which level), but no other
operations.
With this patch __tree_mod_log_oldest_root exits cleanly instead of
BUGging in this situation. get_old_root checks if its really a root at leaf
level in case we don't have any operations and WARNs if this assumption
breaks.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
With the tree mod log, we can have a tree that's two levels high, but
btrfs_search_old_slot may still return a path with the tree root at level
one instead. __resolve_indirect_ref must care for this and accept parents in
a lower level than expected.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
We track two conditions to decide if we should sleep while waiting for more
delayed refs, the number of delayed refs (num_refs) and the first entry in
the list of blockers (first_seq).
When we suspect staleness, we save num_refs and do one more cycle. If
nothing changes, we then save first_seq for later comparison and do
wait_event. We ought to save first_seq the very same moment we're saving
num_refs. Otherwise we cannot be sure that nothing has changed and we might
start waiting when we shouldn't, which could lead to starvation.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Commit "818039c UBIFS: fix debugfs-less systems support" fixed one
regression but introduced a different regression - the debugfs is now always
compiled out. Root cause: IS_ENABLED() arguments should be used with the
CONFIG_* prefix.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Pull Ceph fixes from Sage Weil:
"There are a couple of fixes from Yan for bad pointer dereferences in
the messenger code and when fiddling with page->private after page
migration, a fix from Alex for a use-after-free in the osd client
code, and a couple fixes for the message refcounting and shutdown
ordering."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: flush msgr queue during mon_client shutdown
rbd: Clear ceph_msg->bio_iter for retransmitted message
libceph: use con get/put ops from osd_client
libceph: osd_client: don't drop reply reference too early
ceph: check PG_Private flag before accessing page->private
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJP435OAAoJENaLyazVq6ZOms0P/38KYwNpgGgoeO57ZNXtGXen
C98aa0IwFkjNUFPIogJD4e6gcxfxI9d+626xFZpnkoIEXXpEco5xexjBSIRfg3d7
rNB4HgyQvybJrmRimqyIonTq5DVhQNnlxfYLJKtpM8dhSodNF3YGWmXMcXRSvoZO
D1gMXJxTCoZJ5HjVMFRUOfgKX8RYrM7zNmrzMnefUOkuyFN2Dll7ZxGil05GKnQn
IYds1DvRnyge8o4b7tRUrI50YM3j/w1HgtEDuquQ6UWvOCdbivpPH/+JaP5yD6kQ
H39UBmi+2orC5m8AbDGGaeNuWC844emsLHDkZ63YTrDlEPwo7XZZQ7q8PgKsfqWz
wzOUj9K0VAmcRmPjLsgwktsZYr+tyNYW+fYz6NzlSTtBK8fTyTPiyTNEJ4fEA42O
poRbwH1yoM0YLyII+I+dOb2gk7mOsJa7QMYUE+Art6QWapfUOvQEaIewIEoMyJL9
5Tl4jAZzso0aHmz/72s7CgV7j3gUrOCKGklPYIe5pGt5504CUxypjF2E01cqV5hJ
QNz3LuC8Koraj787DZqY/w7Kk+SNsyzBOidlgy7hgjJEmNrsXAtweyGXH1gKOF3G
ZstBsrgCacgPi+1ixJNJBCDbnM0p6XUZhqFT76aV78CaMgKfslzbgS9qFeCEBS2h
kMvFaTHC9obmAGikOD4f
=QLde
-----END PGP SIGNATURE-----
Merge tag 'for-linus-Jun-21-2012' of git://oss.sgi.com/xfs/xfs
Pull XFS fixes from Ben Myers:
- Fix stale data exposure with unwritten extents
- Fix a warning in xfs_alloc_vextent with ODEBUG
- Fix overallocation and alignment of pages for xfs_bufs
- Fix a cursor leak
- Fix a log hang
- Fix a crash related to xfs_sync_worker
- Rename xfs log structure from struct log to struct xlog so we can use
crash dumps effectively
* tag 'for-linus-Jun-21-2012' of git://oss.sgi.com/xfs/xfs:
xfs: rename log structure to xlog
xfs: shutdown xfs_sync_worker before the log
xfs: Fix overallocation in xfs_buf_allocate_memory()
xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_near
xfs: check for stale inode before acquiring iflock on push
xfs: fix debug_object WARN at xfs_alloc_vextent()
xfs: xfs_vm_writepage clear iomap_valid when !buffer_uptodate (REV2)
Fixes include:
- Fix a write hang due to an uninitalised variable when !defined(CONFIG_NFS_V4)
- Address upcall races in the legacy NFSv4 idmapper
- Remove an O_DIRECT refcounting issue
- Fix a pNFS refcounting bug when the file layout metadata server is also
acting as a data server
- Fix a pNFS module loading race.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=uEPz
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix a write hang due to an uninitalised variable when
!defined(CONFIG_NFS_V4)
- Address upcall races in the legacy NFSv4 idmapper
- Remove an O_DIRECT refcounting issue
- Fix a pNFS refcounting bug when the file layout metadata server is
also acting as a data server
- Fix a pNFS module loading race.
* tag 'nfs-for-3.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Force the legacy idmapper to be single threaded
NFS: Initialise commit_info.rpc_out when !defined(CONFIG_NFS_V4)
NFS: Fix a refcounting issue in O_DIRECT
NFSv4.1: Fix a race in set_pnfs_layoutdriver
NFSv4.1: Fix umount when filelayout DS is also the MDS
Pull btrfs fixes from Chris Mason:
"This is a small pull with btrfs fixes. The biggest of the bunch is
another fix for the new backref walking code.
We're still hammering out one btrfs dio vs buffered reads problem, but
that one will have to wait for the next rc."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: delay iput with async extents
Btrfs: add a missing spin_lock
Btrfs: don't assume to be on the correct extent in add_all_parents
Btrfs: introduce btrfs_next_old_item
Rename the XFS log structure to xlog to help crash distinquish it from the
other logs in Linux.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Revert commit 1307bbd, which uses the s_umount semaphore to provide
exclusion between xfs_sync_worker and unmount, in favor of shutting down
the sync worker before freeing the log in xfs_log_unmount. This is a
cleaner way of resolving the race between xfs_sync_worker and unmount
than using s_umount.
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Commit de1cbee which removed b_file_offset in favor of b_bn introduced a bug
causing xfs_buf_allocate_memory() to overestimate the number of necessary
pages. The problem is that xfs_buf_alloc() sets b_bn to -1 and thus effectively
every buffer is straddling a page boundary which causes
xfs_buf_allocate_memory() to allocate two pages and use vmalloc() for access
which is unnecessary.
Dave says xfs_buf_alloc() doesn't need to set b_bn to -1 anymore since the
buffer is inserted into the cache only after being fully initialized now.
So just make xfs_buf_alloc() fill in proper block number from the beginning.
CC: David Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we fail to find an matching extent near the requested extent
specification during a left-right distance search in
xfs_alloc_ag_vextent_near, we fail to free the original cursor that
we used to look up the XFS_BTNUM_CNT tree and hence leak it.
Reported-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
An inode in the AIL can be flush locked and marked stale if
a cluster free transaction occurs at the right time. The
inode item is then marked as flushing, which causes xfsaild
to spin and leaves the filesystem stalled. This is
reproduced by running xfstests 273 in a loop for an
extended period of time.
Check for stale inodes before the flush lock. This marks
the inode as pinned, leads to a log flush and allows the
filesystem to proceed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
