Commit Graph

68 Commits

Author SHA1 Message Date
Steven Rostedt (Red Hat)
0af26492d5 tracing/trivial: Fix typos and make an int into a bool
Fix up a few typos in comments and convert an int into a bool in
update_traceon_count().

Link: http://lkml.kernel.org/r/546DD445.5080108@hitachi.com

Suggested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-20 10:05:36 -05:00
Steven Rostedt (Red Hat)
a9ce7c36aa tracing: Fix race of function probes counting
The function probe counting for traceon and traceoff suffered a race
condition where if the probe was executing on two or more CPUs at the
same time, it could decrement the counter by more than one when
disabling (or enabling) the tracer only once.

The way the traceon and traceoff probes are suppose to work is that
they disable (or enable) tracing once per count. If a user were to
echo 'schedule:traceoff:3' into set_ftrace_filter, then when the
schedule function was called, it would disable tracing. But the count
should only be decremented once (to 2). Then if the user enabled tracing
again (via tracing_on file), the next call to schedule would disable
tracing again and the count would be decremented to 1.

But if multiple CPUS called schedule at the same time, it is possible
that the count would be decremented more than once because of the
simple "count--" used.

By reading the count into a local variable and using memory barriers
we can guarantee that the count would only be decremented once per
disable (or enable).

The stack trace probe had a similar race, but here the stack trace will
decrement for each time it is called. But this had the read-modify-
write race, where it could stack trace more than the number of times
that was specified. This case we use a cmpxchg to stack trace only the
number of times specified.

The dump probes can still use the old "update_count()" function as
they only run once, and that is controlled by the dump logic
itself.

Link: http://lkml.kernel.org/r/20141118134643.4b550ee4@gandalf.local.home

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-18 23:06:35 -05:00
Rasmus Villemoes
fa6f0cc751 tracing: Replace seq_printf by simpler equivalents
Using seq_printf to print a simple string or a single character is a
lot more expensive than it needs to be, since seq_puts and seq_putc
exist.

These patches do

  seq_printf(m, s) -> seq_puts(m, s)
  seq_printf(m, "%s", s) -> seq_puts(m, s)
  seq_printf(m, "%c", c) -> seq_putc(m, c)

Subsequent patches will simplify further.

Link: http://lkml.kernel.org/r/1415479332-25944-2-git-send-email-linux@rasmusvillemoes.dk

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-13 21:32:19 -05:00
Steven Rostedt (Red Hat)
b1169cc69b tracing: Remove mock up poll wait function
Now that the ring buffer has a built in way to wake up readers
when there's data, using irq_work such that it is safe to do it
in any context. But it was still using the old "poor man's"
wait polling that checks every 1/10 of a second to see if it
should wake up a waiter. This makes the latency for a wake up
excruciatingly long. No need to do that anymore.

Completely remove the different wait_poll types from the tracers
and have them all use the default one now.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-30 08:40:05 -04:00
Steven Rostedt (Red Hat)
4104d326b6 ftrace: Remove global function list and call function directly
Instead of having a list of global functions that are called,
as only one global function is allow to be enabled at a time, there's
no reason to have a list.

Instead, simply have all the users of the global ops, use the global ops
directly, instead of registering their own ftrace_ops. Just switch what
function is used before enabling the function tracer.

This removes a lot of code as well as the complexity involved with it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-21 13:59:25 -04:00
Steven Rostedt (Red Hat)
5d6c97c559 tracing: Do not try to recreated toplevel set_ftrace_* files
With the restructing of the function tracer working with instances, the
"top level" buffer is a bit special, as the function tracing is mapped
to the same set of filters. This is done by using a "global_ops" descriptor
and having the "set_ftrace_filter" and "set_ftrace_notrace" map to it.

When an instance is created, it creates the same files but its for the
local instance and not the global_ops.

The issues is that the local instance creation shares some code with
the global instance one and we end up trying to create th top level
"set_ftrace_*" files twice, and on boot up, we get an error like this:

 Could not create debugfs 'set_ftrace_filter' entry
 Could not create debugfs 'set_ftrace_notrace' entry

The reason they failed to be created was because they were created
twice, and the second time gives this error as you can not create the
same file twice.

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-16 19:21:53 -04:00
Steven Rostedt (Red Hat)
591dffdade ftrace: Allow for function tracing instance to filter functions
Create a "set_ftrace_filter" and "set_ftrace_notrace" files in the instance
directories to let users filter of functions to trace for the given instance.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-20 12:29:07 -05:00
Steven Rostedt (Red Hat)
f20a580627 ftrace: Allow instances to use function tracing
Allow instances (sub-buffers) to enable function tracing.
Each instance will have its own function tracing capability.
For now, instances will not have function stack tracing, or will
they be able to pick and choose what functions they can trace.

Picking and choosing their own functions will come later.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-20 12:13:18 -05:00
Steven Rostedt (Red Hat)
8c1a49aedb tracing: Pass trace_array to set_flag callback
As options (flags) may affect instances instead of being global
the set_flag() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-20 12:13:07 -05:00
Steven Rostedt (Red Hat)
8f76899339 tracing: Add ref_data to function and fgraph tracer structs
The selftest for function and function graph tracers are defined as
__init, as they are only executed at boot up. The "tracer" structs
that are associated to those tracers are not setup as __init as they
are used after boot. To stop mismatch warnings, those structures
need to be annotated with __ref_data.

Currently, the tracer structures are defined to __read_mostly, as they
do not really change. But in the future they should be converted to
consts, but that will take a little work because they have a "next"
pointer that gets updated when they are registered. That will have to
wait till the next major release.

Link: http://lkml.kernel.org/r/1373596735.17876.84.camel@gandalf.local.home

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18 21:31:31 -04:00
Steven Rostedt (Red Hat)
90e3c03c3a tracing: Add function probe to trigger a ftrace dump of current CPU trace
Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.

This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.

Format is:

  <function>:cpudump

echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-11 18:38:48 -04:00
Steven Rostedt (Red Hat)
ad71d889b8 tracing: Add function probe to trigger a ftrace dump to console
Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.

Format is:

  <function>:dump

echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter

Requested-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-11 18:38:46 -04:00
Steven Rostedt (Red Hat)
dd42cd3ea9 tracing: Add function probe to trigger stack traces
Add a function probe that will cause a stack trace to be traced in
the ring buffer when the given function(s) are called.

format is:

 <function>:stacktrace[:<count>]

 echo 'schedule:stacktrace' > /debug/tracing/set_ftrace_filter
 cat /debug/tracing/trace_pipe
     kworker/2:0-4329  [002] ...2  2933.558007: <stack trace>
 => kthread
 => ret_from_fork
          <idle>-0     [000] .N.2  2933.558019: <stack trace>
 => rest_init
 => start_kernel
 => x86_64_start_reservations
 => x86_64_start_kernel
     kworker/2:0-4329  [002] ...2  2933.558109: <stack trace>
 => kthread
 => ret_from_fork
[...]

This can be set to only trace a specific amount of times:

 echo 'schedule:stacktrace:3' > /debug/tracing/set_ftrace_filter
 cat /debug/tracing/trace_pipe
           <...>-58    [003] ...2   841.801694: <stack trace>
 => kthread
 => ret_from_fork
          <idle>-0     [001] .N.2   841.801697: <stack trace>
 => start_secondary
           <...>-2059  [001] ...2   841.801736: <stack trace>
 => wait_for_common
 => wait_for_completion
 => flush_work
 => tty_flush_to_ldisc
 => input_available_p
 => n_tty_poll
 => tty_poll
 => do_select
 => core_sys_select
 => sys_select
 => system_call_fastpath

To remove these:

 echo '!schedule:stacktrace' > /debug/tracing/set_ftrace_filter
 echo '!schedule:stacktrace:0' > /debug/tracing/set_ftrace_filter

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:36:05 -04:00
Steven Rostedt (Red Hat)
8380d24860 ftrace: Separate unlimited probes from count limited probes
The function tracing probes that trigger traceon or traceoff can be
set to unlimited, or given a count of # of times to execute.

By separating these two types of probes, we can then use the dynamic
ftrace function filtering directly, and remove the brute force
"check if this function called is my probe" routines in ftrace.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:59 -04:00
Steven Rostedt (Red Hat)
8b8fa62c60 tracing: Consolidate ftrace_trace_onoff_unreg() into callback
The only thing ftrace_trace_onoff_unreg() does is to do a strcmp()
against the cmd parameter to determine what op to unregister. But
this compare is also done after the location that this function is
called (and returns). By moving the check for '!' to unregister after
the strcmp(), the callback function itself can just do the unregister
and we can get rid of the helper function.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:58 -04:00
Steven Rostedt (Red Hat)
1c31714328 tracing: Consolidate updating of count for traceon/off
Remove some duplicate code and replace it with a helper function.
This makes the code a it cleaner.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:58 -04:00
Steven Rostedt (Red Hat)
12883efb67 tracing: Consolidate max_tr into main trace_array structure
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:40 -04:00
Steven Rostedt
a7603ff4b5 tracing: Replace the static global per_cpu arrays with allocated per_cpu
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:43 -04:00
Steven Rostedt
d41032a83b tracing: Fix unsigned int compare of zero in recursion check
Dan's smatch found a compare bug with the result of the
trace_test_and_set_recursion() and comparing to less than
zero. If the function fails, it returns -1, but was saved in
an unsigned int, which will never be less than zero and will
ignore the result of the test if a recursion did happen.

Luckily this is the last of the recursion tests, as the
infrastructure of ftrace would catch recursions before it
got here, except for some few exceptions.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-24 07:52:34 -05:00
Steven Rostedt
897f68a48b ftrace: Use only the preempt version of function tracing
The function tracer had two different versions of function tracing.

The disabling of irqs version and the preempt disable version.

As function tracing in very intrusive and can cause nasty recursion
issues, it has its own recursion protection. But the old method to
do this was a flat layer. If it detected that a recursion was happening
then it would just return without recording.

This made the preempt version (much faster than the irq disabling one)
not very useful, because if an interrupt were to occur after the
recursion flag was set, the interrupt would not be traced at all,
because every function that was traced would think it recursed on
itself (due to the context it preempted setting the recursive flag).

Now that we have a recursion flag for every context level, we
no longer need to worry about that. We can disable preemption,
set the current context recursion check bit, and go on. If an
interrupt were to come along, it would check its own context bit
and happily continue to trace.

As the preempt version is faster than the irq disable version,
there's no more reason to keep the preempt version around.
And the irq disable version still had an issue with missing
out on tracing NMI code.

Remove the irq disable function tracer version and have the
preempt disable version be the default (and only version).

Before this patch we had from running:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 12.028
Time: 11.945
Time: 11.925
Time: 11.964
Time: 12.002
Time: 11.910
Time: 11.944
Time: 11.929
Time: 11.941
Time: 11.924

(average: 11.9512)

Now we have:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253

(average: 10.3012)

 a 13.8% savings!

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-22 23:38:02 -05:00
Linus Torvalds
a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Nadia Yvette Chambers
6d49e352ae propagate name change to comments in kernel source
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.

Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:39:54 +01:00
Steven Rostedt
6f4156723c tracing: Allow tracers to start at core initcall
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().

There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:45:24 -04:00
Daniel Walter
bcd83ea6cb tracing: Replace strict_strto* with kstrto*
* remove old string conversions with kstrto*

Link: http://lkml.kernel.org/r/20120926200838.GC1244@0x90.at

Signed-off-by: Daniel Walter <sahne@0x90.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:45:23 -04:00
Linus Torvalds
7f60ba388f 1. We no longer ad-hoc to the function tracer "high level" infrastructure
and no longer use its debugfs knobs. The change slightly touches
    kernel/trace directory, but it got the needed ack from Steven Rostedt:
    http://lkml.org/lkml/2012/8/21/688
 2. Added maintainers entry;
 3. A bunch of fixes, nothing special.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQbjoFAAoJEGgI9fZJve1bZgUP/A/ZwFGfdnochDgRhK5p7ljY
 baRZpgSh2B+BxIDTEPLfVh6HbOivmYJ8WF0unD9kKTzCCS71ZUMiLB25G/bV4lnZ
 fawAOhGfOLG3rXmldxf6nJllHr9JpoSmVEHypvjFNcbjYZ04zhe7jM+YsaWmBw68
 eHXQkOSdfPPpKXZ2B0Eef/EoGWhORW0kTD7xFlorsxYAkksSheY0PC0nYgCFhvCZ
 168y9pi4T4lucr4s44x8AJ/r/5BQ1jEQAY/A2qUE/iBfRFP4XyE1Oao4OHtVDYdU
 KjVPA1VYmwkKSfnkiVFrpb/94IyrKslblgR8nX0kK3L/ccFYjQix4nd9jR+n857s
 xfAuj9nfhUO6fI5qoaVSOBufxKyPp1S7X8INEAJ7WQ0c9VoMv00biK9M77ifDGZg
 ll/Ecq1CADtcbOnQXf6qwGwRKmpR+qgPkIzpNXcuGMuM4AEPwtckOhCyXFr37Txk
 6ZoGM8IIaBJ0yXxHkfpUA7l9ZF0gXR+qHMQCwpUS8tIMx35On+IbybEaKbniKEi1
 AURgQ7ZimVYAHPi0Y0L00+EKI3IPVQJvCFH7SG+wUfLWcbEtNbTv3MAer5o3DANJ
 GMnWBwNw9ClTydWKI0GMNmnWpFukWhd4OXleyl2+q4qRJi3HhNacrok3s/2r+CnT
 QRg8i/0SDvxGuXazrTZT
 =1HAE
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore

Pull pstore changes from Anton Vorontsov:

 1) We no longer ad-hoc to the function tracer "high level"
    infrastructure and no longer use its debugfs knobs.  The change
    slightly touches kernel/trace directory, but it got the needed ack
    from Steven Rostedt:

      http://lkml.org/lkml/2012/8/21/688

 2) Added maintainers entry;

 3) A bunch of fixes, nothing special.

* tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore:
  pstore: Avoid recursive spinlocks in the oops_in_progress case
  pstore/ftrace: Convert to its own enable/disable debugfs knob
  pstore/ram: Add missing platform_device_unregister
  MAINTAINERS: Add pstore maintainers
  pstore/ram: Mark ramoops_pstore_write_buf() as notrace
  pstore/ram: Fix printk format warning
  pstore/ram: Fix possible NULL dereference
2012-10-07 17:30:50 +09:00
Anton Vorontsov
65f8c95e46 pstore/ftrace: Convert to its own enable/disable debugfs knob
With this patch we no longer reuse function tracer infrastructure, now
we register our own tracer back-end via a debugfs knob.

It's a bit more code, but that is the only downside. On the bright side we
have:

- Ability to make persistent_ram module removable (when needed, we can
  move ftrace_ops struct into a module). Note that persistent_ram is still
  not removable for other reasons, but with this patch it's just one
  thing less to worry about;

- Pstore part is more isolated from the generic function tracer. We tried
  it already by registering our own tracer in available_tracers, but that
  way we're loosing ability to see the traces while we record them to
  pstore. This solution is somewhere in the middle: we only register
  "internal ftracer" back-end, but not the "front-end";

- When there is only pstore tracing enabled, the kernel will only write
  to the pstore buffer, omitting function tracer buffer (which, of course,
  still can be enabled via 'echo function > current_tracer').

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-09-06 22:16:58 -07:00
Ingo Molnar
bcada3d4b8 perf/core improvements and fixes:
. Fix include order for bison/flex-generated C files, from Ben Hutchings
 
  . Build fixes and documentation corrections from David Ahern
 
  . Group parsing support, from Jiri Olsa
 
  . UI/gtk refactorings and improvements from Namhyung Kim
 
  . NULL deref fix for perf script, from Namhyung Kim
 
  . Assorted cleanups from Robert Richter
 
  . Let O= makes handle relative paths, from Steven Rostedt
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJQMkGhAAoJENZQFvNTUqpAqjsQAJE5iD1LFogC8o/WjvRHz0TY
 Y0x+sR/XfW61KYpeq5g+UaKuFU3P44ijCoyks3y5sza97DkYgUwMpEHlLXFSM8Pp
 sNOapqY57s24nq3MLrhH1V9w+cSE+m2u/Gi5fGLCQekio9gkOBwYxNGk7vpKri/n
 LBRsMozBu/mZjMy20uWOb7Uk8xsAToh+TFaAtjyQ9Snn9nNJj49NUAp37uN888H/
 ducMLq32HN5v/6Zd3q6IWdDWgZsHLkIa3R5FIs/GNe3Dih07gtYLmDol4ktPbTFm
 yoaWpP5wbtu/62EZlJwE393vMuoeqN/96394ZZQGFafhHVxN4+rcBhXbejBs0T2b
 wk/0CzntW8bbUAI/cl3SB9aui//FWOxcjG9aDQ7PsmHzPw1Q4VD0F9Mcod4p+dRX
 PsA9q/tST1eAiwzWYthDtj81U7iChINcXKhoZn2xn6+0+aMH+6FFNBmCH8MR5aCU
 BvrXhTJjvau/Ym/sILl4Tf4wfssTq49yMsn/YKCwLJ0hg0XlTObWfQRy2MOayXH9
 NJvUE+9GSXoTEKhmr1AfTYEG9vObaXZyFwAI74xvPPwUYojCb4ZjEKmG0egW+VGk
 IJKFCaJZwwVsGau4aIbFAMP12/L8Qs/Ox91ddCJ0j5TIlSGMaqW5lbV1N1crzlTT
 a0GsN49NvhbFttBXrcNX
 =0a2X
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Fix include order for bison/flex-generated C files, from Ben Hutchings

 * Build fixes and documentation corrections from David Ahern

 * Group parsing support, from Jiri Olsa

 * UI/gtk refactorings and improvements from Namhyung Kim

 * NULL deref fix for perf script, from Namhyung Kim

 * Assorted cleanups from Robert Richter

 * Let O= makes handle relative paths, from Steven Rostedt

 * perf script python fixes, from Feng Tang.

 * Improve 'perf lock' error message when the needed tracepoints
   are not present, from David Ahern.

 * Initial bash completion support, from Frederic Weisbecker

 * Allow building without libelf, from Namhyung Kim.

 * Support DWARF CFI based unwind to have callchains when %bp
   based unwinding is not possible, from Jiri Olsa.

 * Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
   section was the end goal, several fixes for code that handles all
   architectures and cleanups are included, from Cody Schafer.

 * Add a description for the JIT interface, from Andi Kleen.

 * Assorted fixes for Documentation and build in 32 bit, from Robert Richter

 * Add support for non-tracepoint events in perf script python, from Feng Tang

 * Cache the libtraceevent event_format associated to each evsel early, so that we
   avoid relookups, i.e. calling pevent_find_event repeatedly when processing
   tracepoint events.

   [ This is to reduce the surface contact with libtraceevents and make clear what
     is that the perf tools needs from that lib: so far parsing the common and per
     event fields. ]

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-21 11:27:00 +02:00
Steven Rostedt
4740974a68 ftrace: Add default recursion protection for function tracing
As more users of the function tracer utility are being added, they do
not always add the necessary recursion protection. To protect from
function recursion due to tracing, if the callback ftrace_ops does not
specifically specify that it protects against recursion (by setting
the FTRACE_OPS_FL_RECURSION_SAFE flag), the list operation will be
called by the mcount trampoline which adds recursion protection.

If the flag is set, then the function will be called directly with no
extra protection.

Note, the list operation is called if more than one function callback
is registered, or if the arch does not support all of the function
tracer features.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-31 10:29:52 -04:00
Steven Rostedt
a1e2e31d17 ftrace: Return pt_regs to function trace callback
Return as the 4th paramater to the function tracer callback the pt_regs.

Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.

If an arch can pass full regs, then it should define:
 ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1

Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 13:18:49 -04:00
Steven Rostedt
2f5f6ad939 ftrace: Pass ftrace_ops as third parameter to function trace callback
Currently the function trace callback receives only the ip and parent_ip
of the function that it traced. It would be more powerful to also return
the ops that registered the function as well. This allows the same function
to act differently depending on what ftrace_ops registered it.

Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 13:17:35 -04:00
Anton Vorontsov
f555f1231a tracing/function: Convert func_set_flag() to a switch statement
Since the function accepts just one bit, we can use the switch
construction instead of if/else if/...

Just a cosmetic change, there should be no functional changes.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17 10:15:04 -07:00
Anton Vorontsov
21f679404a tracing/function: Introduce persistent trace option
This patch introduces 'func_ptrace' option, now available in
/sys/kernel/debug/tracing/options when function tracer
is selected.

The patch also adds some tiny code that calls back to pstore
to record the trace. The callback is no-op when PSTORE=n.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17 10:07:00 -07:00
Steven Rostedt
43dd61c9a0 ftrace: Fix regression of :mod:module function enabling
The new code that allows different utilities to pick and choose
what functions they trace broke the :mod: hook that allows users
to trace only functions of a particular module.

The reason is that the :mod: hook bypasses the hash that is setup
to allow individual users to trace their own functions and uses
the global hash directly. But if the global hash has not been
set up, it will cause a bug:

echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter

produces:

 [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
 [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip
 BUG: unable to handle kernel paging request at ffffffff8160ec90
 IP: [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1
 Oops: 0003 [#1] SMP Jul  7 04:02:28 phyllis kernel: [55303.858604] CPU 1
 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt

 Pid: 10344, comm: bash Tainted: G        WC  3.0.0-rc5 #1 Dell Inc. Inspiron N5010/0YXXJJ
 RIP: 0010:[<ffffffff810d9136>]  [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
 RSP: 0018:ffff88003a96bda8  EFLAGS: 00010246
 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940
 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78
 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000
 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470)
 Stack:
  0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5
  ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80
  ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00
 Call Trace:
  [<ffffffff810d92f5>] match_records+0x155/0x1b0
  [<ffffffff810d940c>] ftrace_mod_callback+0xbc/0x100
  [<ffffffff810dafdf>] ftrace_regex_write+0x16f/0x210
  [<ffffffff810db09f>] ftrace_filter_write+0xf/0x20
  [<ffffffff81166e48>] vfs_write+0xc8/0x190
  [<ffffffff81167001>] sys_write+0x51/0x90
  [<ffffffff815c7e02>] system_call_fastpath+0x16/0x1b
 Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2
 RIP [<ffffffff810d9136>] add_hash_entry+0x66/0xd0
  RSP <ffff88003a96bda8>
 CR2: ffffffff8160ec90
 ---[ end trace a5d031828efdd88e ]---

Reported-by: Brian Marete <marete@toshnix.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07 11:30:08 -04:00
Steven Rostedt
b848914ce3 ftrace: Implement separate user function filtering
ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-18 15:29:50 -04:00
Steven Rostedt
5168ae50a6 tracing: Remove ftrace_preempt_disable/enable
The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).

The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.

This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.

This bug would cause a missed preemption check and cause lower latencies.

Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 19:32:38 -04:00
Steven Rostedt
b375a11a23 tracing: switch function prints from %pf to %ps
For direct function pointers (like what mcount provides) PowerPC64
requires the use of %ps, otherwise nothing is printed.

This patch converts all prints of functions retrieved through mcount
to use the %ps format from the %pf.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-17 15:53:40 -04:00
Ingo Molnar
45bceffc30 Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on an older, pre-rc1 base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-18 12:20:01 +02:00
Xiao Guangrong
6f2f3cf00e tracing/function: Cleanup for function tracer
We can directly use %pf input format instead of kallsyms_lookup()
and %s input format

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-17 01:45:51 -04:00
Xiao Guangrong
04aef32d39 tracing/function: Fix the return value of ftrace_trace_onoff_callback()
ftrace_trace_onoff_callback() will return an error even if we do the
right operation, for example:

 # echo _spin_*:traceon:10 > set_ftrace_filter
 -bash: echo: write error: Invalid argument
 # cat set_ftrace_filter
 #### all functions enabled ####
 _spin_trylock_bh:traceon:count=10
 _spin_unlock_irq:traceon:count=10
 _spin_unlock_bh:traceon:count=10
 _spin_lock_irq:traceon:count=10
 _spin_unlock:traceon:count=10
 _spin_trylock:traceon:count=10
 _spin_unlock_irqrestore:traceon:count=10
 _spin_lock_irqsave:traceon:count=10
 _spin_lock_bh:traceon:count=10
 _spin_lock:traceon:count=10

We want to set _spin_*:traceon:10 to set_ftrace_filter, it complains
with "Invalid argument", but the operation is successful.

This is because ftrace_process_regex() returns the number of functions that
matched the pattern. If the number is not 0, this value is returned
by ftrace_regex_write() whereas we want to return the number of bytes
virtually written.
Also the file offset pointer is not updated in this case.

If the number of matched functions is lower than the number of bytes written
by the user, this results to a reprocessing of the string given by the user with
a lower size, leading to a malformed ftrace regex and then a -EINVAL returned.

So, this patch fixes it by returning 0 if no error occured.
The fix also applies on 2.6.30

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-16 23:34:32 -04:00
Li Zefan
00e54d087a ftrace: Remove duplicate newline
Before:
  # echo 'sys_open:traceon:' > set_ftrace_filter
  # echo 'sys_close:traceoff:5' > set_ftrace_filter
  # cat set_ftrace_filter
  #### all functions enabled ####
  sys_open:traceon:unlimited

  sys_close:traceoff:count=0

After:
  # cat set_ftrace_filter
  #### all functions enabled ####
  sys_open:traceon:unlimited
  sys_close:traceoff:count=0

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4313A7.7030105@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 10:28:36 +02:00
Frederic Weisbecker
c85a17e226 tracing/urgent: fix unbalanced ftrace_start_up
Perfcounter reports the following stats for a wide system
profiling:

 #
 # (2364 samples)
 #
 # Overhead  Symbol
 # ........  ......
 #
    15.40%  [k] mwait_idle_with_hints
     8.29%  [k] read_hpet
     5.75%  [k] ftrace_caller
     3.60%  [k] ftrace_call
     [...]

This snapshot has been taken while neither the function tracer nor
the function graph tracer was running.
With dynamic ftrace, such results show a wrong ftrace behaviour
because all calls to ftrace_caller or ftrace_graph_caller (the patched
calls to mcount) are supposed to be patched into nop if none of those
tracers are running.

The problem occurs after the first run of the function tracer. Once we
launch it a second time, the callsites will never be nopped back,
unless you set custom filters.
For example it happens during the self tests at boot time.
The function tracer selftest runs, and then the dynamic tracing is
tested too. After that, the callsites are left un-nopped.

This is because the reset callback of the function tracer tries to
unregister two ftrace callbacks in once: the common function tracer
and the function tracer with stack backtrace, regardless of which
one is currently in use.
It then creates an unbalance on ftrace_start_up value which is expected
to be zero when the last ftrace callback is unregistered. When it
reaches zero, the FTRACE_DISABLE_CALLS is set on the next ftrace
command, triggering the patching into nop. But since it becomes
unbalanced, ie becomes lower than zero, if the kernel functions
are patched again (as in every further function tracer runs), they
won't ever be nopped back.

Note that ftrace_call and ftrace_graph_call are still patched back
to ftrace_stub in the off case, but not the callers of ftrace_call
and ftrace_graph_caller. It means that the tracing is well deactivated
but we waste a useless call into every kernel function.

This patch just unregisters the right ftrace_ops for the function
tracer on its reset callback and ignores the other one which is
not registered, fixing the unbalance. The problem also happens
is .30

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
2009-06-20 06:28:46 +02:00
Frederic Weisbecker
6eaaa5d57e tracing/core: use appropriate waiting on trace_pipe
Impact: api and pipe waiting change

Currently, the waiting used in tracing_read_pipe() is done through a
100 msecs schedule_timeout() loop which periodically check if there
are traces on the buffer.

This can cause small latencies for programs which are reading the incoming
events.

This patch makes the reader waiting for the trace_wait waitqueue except
for few tracers such as the sched and functions tracers which might be
already hold the runqueue lock while waking up the reader.

This is performed through a new callback wait_pipe() on struct tracer.
If none is implemented on a specific tracer, the default waiting for
trace_wait queue is attached.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-18 01:40:20 +01:00
Steven Rostedt
35ebf1caa4 ftrace: show unlimited when traceon or traceoff has no counter
Impact: clean up

The traceon and traceoff function probes are confusing to developers
to what happens when a counter is not specified. This should help
clear things up.

 # echo "*:traceoff" > set_ftrace_filter
 # cat /debug/tracing/set_ftrace_filter

  #### all functions enabled ####
  do_fork:traceoff:unlimited

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 13:12:12 -05:00
Steven Rostedt
b6887d7916 ftrace: rename _hook to _probe
Impact: clean up

Ingo Molnar did not like the _hook naming convention used by the
select function tracer. Luis Claudio R. Goncalves suggested using
the "_probe" extension. This patch implements the change of
calling the functions and variables "_hook" and replacing them
with "_probe".

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 12:32:04 -05:00
Steven Rostedt
6a24a244cd ftrace: clean up coding style
Ingo Molnar pointed out some coding style issues with the recent ftrace
updates. This patch cleans them up.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-17 11:20:26 -05:00
Steven Rostedt
e110e3d1ea ftrace: add pretty print function for traceon and traceoff hooks
This patch adds a pretty print version of traceon and traceoff
output for set_ftrace_filter.

  # echo 'sys_open:traceon:4' > set_ftrace_filter
  # cat set_ftrace_filter

 #### all functions enabled ####
 sys_open:traceon:count=4

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 23:38:13 -05:00
Steven Rostedt
23b4ff3aa4 ftrace: add traceon traceoff commands to enable/disable the buffers
This patch adds the new function selection commands traceon and
traceoff. traceon sets the function to enable the ring buffers
while traceoff disables the ring buffers.  You can pass in the
number of times you want the command to be executed when the function
is hit. It will only execute if the state of the buffers are not
already in that state.

Example:

 # echo do_fork:traceon:4

Will enable the ring buffers if they are disabled every time it
hits do_fork, up to 4 times.

 # echo sys_close:traceoff

This will disable the ring buffers every time (unlimited) when
sys_close is called.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-16 22:50:04 -05:00
Arnaldo Carvalho de Melo
b6f11df26f trace: Call tracing_reset_online_cpus before tracer->init()
Impact: cleanup

To make it easy for ftrace plugin writers, as this was open coded in
the existing plugins

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-06 01:01:41 +01:00
Arnaldo Carvalho de Melo
7be421510b trace: Remove unused trace_array_cpu parameter
Impact: cleanup

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 14:35:47 +01:00
Steven Rostedt
a225cdd263 ftrace: remove static from function tracer functions
Impact: clean up

After reorganizing the functions in trace.c and trace_function.c,
they no longer need to be in global context. This patch makes the
functions and one variable into static.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 12:17:58 +01:00