Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
The reference count in kernfs_node structure is treated like a rwsem by
using lockdep instrumentation code. The lockdep name, however, is still
"s_active" which is carried over from the old sysfs code. As s_active
is no longer the variable name, its use may confuse users on where the
lock is when it is reported by lockdep. So it is changed to "kn->count"
which is how this variable is normally referenced in kernfs code.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
inode number and generation can identify a kernfs node. We are going to
export the identification by exportfs operations, so put ino and
generation into a separate structure. It's convenient when later patches
use the identification.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When working on adding exportfs operations in kernfs, I found it's hard
to initialize dentry->d_fsdata in the exportfs operations. Looks there
is no way to do it without race condition. Look at the kernfs code
closely, there is no point to set dentry->d_fsdata. inode->i_private
already points to kernfs_node, and we can get inode from a dentry. So
this patch just delete the d_fsdata usage.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recently started seeing a kernel oops when a module tries removing a
memory mapped sysfs bin_attribute. On closer investigation the root
cause seems to be kernfs_release_file() trying to call
kernfs_op.release() callback that's NULL for such sysfs
bin_attributes. The oops occurs when kernfs_release_file() is called from
kernfs_drain_open_files() to cleanup any open handles with active
memory mappings.
The patch fixes this by checking for flag KERNFS_HAS_RELEASE before
calling kernfs_release_file() in function kernfs_drain_open_files().
On ppc64-le arch with cxl module the oops back-trace is of the
form below:
[ 861.381126] Unable to handle kernel paging request for instruction fetch
[ 861.381360] Faulting instruction address: 0x00000000
[ 861.381428] Oops: Kernel access of bad area, sig: 11 [#1]
....
[ 861.382481] NIP: 0000000000000000 LR: c000000000362c60 CTR:
0000000000000000
....
Call Trace:
[c000000f1680b750] [c000000000362c34] kernfs_drain_open_files+0x104/0x1d0 (unreliable)
[c000000f1680b790] [c00000000035fa00] __kernfs_remove+0x260/0x2c0
[c000000f1680b820] [c000000000360da0] kernfs_remove_by_name_ns+0x60/0xe0
[c000000f1680b8b0] [c0000000003638f4] sysfs_remove_bin_file+0x24/0x40
[c000000f1680b8d0] [c00000000062a164] device_remove_bin_file+0x24/0x40
[c000000f1680b8f0] [d000000009b7b22c] cxl_sysfs_afu_remove+0x144/0x170 [cxl]
[c000000f1680b940] [d000000009b7c7e4] cxl_remove+0x6c/0x1a0 [cxl]
[c000000f1680b990] [c00000000052f694] pci_device_remove+0x64/0x110
[c000000f1680b9d0] [c0000000006321d4] device_release_driver_internal+0x1f4/0x2b0
[c000000f1680ba20] [c000000000525cb0] pci_stop_bus_device+0xa0/0xd0
[c000000f1680ba60] [c000000000525e80] pci_stop_and_remove_bus_device+0x20/0x40
[c000000f1680ba90] [c00000000004a6c4] pci_hp_remove_devices+0x84/0xc0
[c000000f1680bad0] [c00000000004a688] pci_hp_remove_devices+0x48/0xc0
[c000000f1680bb10] [c0000000009dfda4] eeh_reset_device+0xb0/0x290
[c000000f1680bbb0] [c000000000032b4c] eeh_handle_normal_event+0x47c/0x530
[c000000f1680bc60] [c000000000032e64] eeh_handle_event+0x174/0x350
[c000000f1680bd10] [c000000000033228] eeh_event_handler+0x1e8/0x1f0
[c000000f1680bdc0] [c0000000000d384c] kthread+0x14c/0x190
[c000000f1680be30] [c00000000000b5a0] ret_from_kernel_thread+0x5c/0xbc
Fixes: f83f3c5156 ("kernfs: fix locking around kernfs_ops->release() callback")
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update code that relied on sched.h including various MM types for them.
This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull cgroup updates from Tejun Heo:
"Several noteworthy changes.
- Parav's rdma controller is finally merged. It is very straight
forward and can limit the abosolute numbers of common rdma
constructs used by different cgroups.
- kernel/cgroup.c got too chubby and disorganized. Created
kernel/cgroup/ subdirectory and moved all cgroup related files
under kernel/ there and reorganized the core code. This hurts for
backporting patches but was long overdue.
- cgroup v2 process listing reimplemented so that it no longer
depends on allocating a buffer large enough to cache the entire
result to sort and uniq the output. v2 has always mangled the sort
order to ensure that users don't depend on the sorted output, so
this shouldn't surprise anybody. This makes the pid listing
functions use the same iterators that are used internally, which
have to have the same iterating capabilities anyway.
- perf cgroup filtering now works automatically on cgroup v2. This
patch was posted a long time ago but somehow fell through the
cracks.
- misc fixes asnd documentation updates"
* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (27 commits)
kernfs: fix locking around kernfs_ops->release() callback
cgroup: drop the matching uid requirement on migration for cgroup v2
cgroup, perf_event: make perf_event controller work on cgroup2 hierarchy
cgroup: misc cleanups
cgroup: call subsys->*attach() only for subsystems which are actually affected by migration
cgroup: track migration context in cgroup_mgctx
cgroup: cosmetic update to cgroup_taskset_add()
rdmacg: Fixed uninitialized current resource usage
cgroup: Add missing cgroup-v2 PID controller documentation.
rdmacg: Added documentation for rdmacg
IB/core: added support to use rdma cgroup controller
rdmacg: Added rdma cgroup controller
cgroup: fix a comment typo
cgroup: fix RCU related sparse warnings
cgroup: move namespace code to kernel/cgroup/namespace.c
cgroup: rename functions for consistency
cgroup: move v1 mount functions to kernel/cgroup/cgroup-v1.c
cgroup: separate out cgroup1_kf_syscall_ops
cgroup: refactor mount path and clearly distinguish v1 and v2 paths
cgroup: move cgroup v1 specific code to kernel/cgroup/cgroup-v1.c
...
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The release callback may be called from two places - file release
operation and kernfs open file draining. kernfs_open_file->mutex is
used to synchronize the two callsites. This unfortunately leads to
possible circular locking because of->mutex is used to protect the
usual kernfs operations which may use locking constructs which are
held while removing and thus draining kernfs files.
@of->mutex is for synchronizing concurrent kernfs access operations
and all we need here is synchronization between the releaes and drain
paths. As the drain path has to grab kernfs_open_file_mutex anyway,
let's use the mutex to synchronize the release operation instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Fixes: 0e67db2f9f ("kernfs: add kernfs_ops->open/release() callbacks")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ->open/release() methods to kernfs_ops. ->open() is called when
the file is opened and ->release() when the file is either released or
severed. These callbacks can be used, for example, to manage
persistent caching objects over multiple seq_file iterations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Acked-by: Zefan Li <lizefan@huawei.com>
More kernfs_open_file->mutex synchronized flags are planned to be
added. Convert ->mmapped to a bitfield in preparation.
While at it, make kernfs_fop_mmap() use "true" instead of "1" on
->mmapped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Acked-by: Zefan Li <lizefan@huawei.com>
If you edit a kernfs backed file with vi(1), you see an ugly error
message when you write the file because vi tries to fsync(2) the
file after writing, which fails.
We have noop_fsync() for this, use it.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_notify_workfn() sends out file modified events for the
scheduled kernfs_nodes. Because the modifications aren't from
userland, it doesn't have the matching file struct at hand and can't
use fsnotify_modify(). Instead, it looked up the inode and then used
d_find_any_alias() to find the dentry and used fsnotify_parent() and
fsnotify() directly to generate notifications.
The assumption was that the relevant dentries would have been pinned
if there are listeners, which isn't true as inotify doesn't pin
dentries at all and watching the parent doesn't pin the child dentries
even for dnotify. This led to, for example, inotify watchers not
getting notifications if the system is under memory pressure and the
matching dentries got reclaimed. It can also be triggered through
/proc/sys/vm/drop_caches or a remount attempt which involves shrinking
dcache.
fsnotify_parent() only uses the dentry to access the parent inode,
which kernfs can do easily. Update kernfs_notify_workfn() so that it
uses fsnotify() directly for both the parent and target inodes without
going through d_find_any_alias(). While at it, supply the target file
name to fsnotify() from kernfs_node->name.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Fixes: d911d98748 ("kernfs: make kernfs_notify() trigger inotify events too")
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grabbing the parent is not happening anymore since 2010 (e72ceb8cca
"sysfs: Remove sysfs_get/put_active_two"). Remove this confusing
comment.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernfs supports two styles of read: direct_read and seqfile_read.
The latter supports 'poll' correctly thanks to the update of
'->event' in kernfs_seq_show.
The former does not as '->event' is never updated on a read.
So add an appropriate update in kernfs_file_direct_read().
This was noticed because some 'md' sysfs attributes were
recently changed to use direct reads.
Reported-by: Prakash Punnoor <prakash@punnoor.de>
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Fixes: 750f199ee8
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a new kernfs node is created, KERNFS_STATIC_NAME is used to avoid
making a separate copy of its name. It's currently only used for sysfs
attributes whose filenames are required to stay accessible and unchanged.
There are rare exceptions where these names are allocated and formatted
dynamically but for the vast majority of cases they're consts in the
rodata section.
Now that kernfs is converted to use kstrdup_const() and kfree_const(),
there's little point in keeping KERNFS_STATIC_NAME around. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
the only instance this method has ever grown was one in kernfs -
one that call ->migrate() of another vm_ops if it exists.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To match the previous patch which used the pre-alloc buffer for
writes, this patch causes reads to use the same buffer.
This is not strictly necessary as the current seq_read() will allocate
on first read, so user-space can trigger the required pre-alloc. But
consistency is valuable.
The read function is somewhat simpler than seq_read() and, for example,
does not support reading from an offset into the file: reads must be
at the start of the file.
As seq_read() does not use the prealloc buffer, ->seq_show is
incompatible with ->prealloc and caused an EINVAL return from open().
sysfs code which calls into kernfs always chooses the correct function.
As the buffer is shared with writes and other reads, the mutex is
extended to cover the copy_to_user.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
md/raid allows metadata management to be performed in user-space.
A various times, particularly on device failure, the metadata needs
to be updated before further writes can be permitted.
This means that the user-space program which updates metadata much
not block on writeout, and so must not allocate memory.
mlockall(MCL_CURRENT|MCL_FUTURE) and pre-allocation can avoid all
memory allocation issues for user-memory, but that does not help
kernel memory.
Several kernel objects can be pre-allocated. e.g. files opened before
any writes to the array are permitted.
However some kernel allocation happens in places that cannot be
pre-allocated.
In particular, writes to sysfs files (to tell md that it can now
allow writes to the array) allocate a buffer using GFP_KERNEL.
This patch allows attributes to be marked as "PREALLOC". In that case
the maximal buffer is allocated when the file is opened, and then used
on each write instead of allocating a new buffer.
As the same buffer is now shared for all writes on the same file
description, the mutex is extended to cover full use of the buffer
including the copy_from_user().
The new __ATTR_PREALLOC() 'or's a new flag in to the 'mode', which is
inspected by sysfs_add_file_mode_ns() to determine if the file should be
marked as requiring prealloc.
Despite the comment, we *do* use ->seq_show together with ->prealloc
in this patch. The next patch fixes that.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
d911d98748 ("kernfs: make kernfs_notify() trigger inotify events
too") added fsnotify triggering to kernfs_notify() which requires a
sleepable context. There are already existing users of
kernfs_notify() which invoke it from an atomic context and in general
it's silly to require a sleepable context for triggering a
notification.
The following is an invalid context bug triggerd by md invoking
sysfs_notify() from IO completion path.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586
in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
2 locks held by swapper/1/0:
#0: (&(&vblk->vq_lock)->rlock){-.-...}, at: [<ffffffffa0039042>] virtblk_done+0x42/0xe0 [virtio_blk]
#1: (&(&bitmap->counts.lock)->rlock){-.....}, at: [<ffffffff81633718>] bitmap_endwrite+0x68/0x240
irq event stamp: 33518
hardirqs last enabled at (33515): [<ffffffff8102544f>] default_idle+0x1f/0x230
hardirqs last disabled at (33516): [<ffffffff818122ed>] common_interrupt+0x6d/0x72
softirqs last enabled at (33518): [<ffffffff810a1272>] _local_bh_enable+0x22/0x50
softirqs last disabled at (33517): [<ffffffff810a29e0>] irq_enter+0x60/0x80
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-0.rc2.git2.1.fc21.x86_64 #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
0000000000000000 f90db13964f4ee05 ffff88007d403b80 ffffffff81807b4c
0000000000000000 ffff88007d403ba8 ffffffff810d4f14 0000000000000000
0000000000441800 ffff880078fa1780 ffff88007d403c38 ffffffff8180caf2
Call Trace:
<IRQ> [<ffffffff81807b4c>] dump_stack+0x4d/0x66
[<ffffffff810d4f14>] __might_sleep+0x184/0x240
[<ffffffff8180caf2>] mutex_lock_nested+0x42/0x440
[<ffffffff812d76a0>] kernfs_notify+0x90/0x150
[<ffffffff8163377c>] bitmap_endwrite+0xcc/0x240
[<ffffffffa00de863>] close_write+0x93/0xb0 [raid1]
[<ffffffffa00df029>] r1_bio_write_done+0x29/0x50 [raid1]
[<ffffffffa00e0474>] raid1_end_write_request+0xe4/0x260 [raid1]
[<ffffffff813acb8b>] bio_endio+0x6b/0xa0
[<ffffffff813b46c4>] blk_update_request+0x94/0x420
[<ffffffff813bf0ea>] blk_mq_end_io+0x1a/0x70
[<ffffffffa00392c2>] virtblk_request_done+0x32/0x80 [virtio_blk]
[<ffffffff813c0648>] __blk_mq_complete_request+0x88/0x120
[<ffffffff813c070a>] blk_mq_complete_request+0x2a/0x30
[<ffffffffa0039066>] virtblk_done+0x66/0xe0 [virtio_blk]
[<ffffffffa002535a>] vring_interrupt+0x3a/0xa0 [virtio_ring]
[<ffffffff81116177>] handle_irq_event_percpu+0x77/0x340
[<ffffffff8111647d>] handle_irq_event+0x3d/0x60
[<ffffffff81119436>] handle_edge_irq+0x66/0x130
[<ffffffff8101c3e4>] handle_irq+0x84/0x150
[<ffffffff818146ad>] do_IRQ+0x4d/0xe0
[<ffffffff818122f2>] common_interrupt+0x72/0x72
<EOI> [<ffffffff8105f706>] ? native_safe_halt+0x6/0x10
[<ffffffff81025454>] default_idle+0x24/0x230
[<ffffffff81025f9f>] arch_cpu_idle+0xf/0x20
[<ffffffff810f5adc>] cpu_startup_entry+0x37c/0x7b0
[<ffffffff8104df1b>] start_secondary+0x25b/0x300
This patch fixes it by punting the notification delivery through a
work item. This ends up adding an extra pointer to kernfs_elem_attr
enlarging kernfs_node by a pointer, which is not ideal but not a very
big deal either. If this turns out to be an actual issue, we can move
kernfs_elem_attr->size to kernfs_node->iattr later.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernfs open method - kernfs_fop_open() - inherited extra
permission checks from sysfs. While the vfs layer allows ignoring the
read/write permissions checks if the issuer has CAP_DAC_OVERRIDE,
sysfs explicitly denied open regardless of the cap if the file doesn't
have any of the UGO perms of the requested access or doesn't implement
the requested operation. It can be debated whether this was a good
idea or not but the behavior is too subtle and dangerous to change at
this point.
After cgroup got converted to kernfs, this extra perm check also got
applied to cgroup breaking libcgroup which opens write-only files with
O_RDWR as root. This patch gates the extra open permission check with
a new flag KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK and enables it for sysfs.
For sysfs, nothing changes. For cgroup, root now can perform any
operation regardless of the permissions as it was before kernfs
conversion. Note that kernfs still fails unimplemented operations
with -EINVAL.
While at it, add comments explaining KERNFS_ROOT flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Wagin <avagin@gmail.com>
Tested-by: Andrey Wagin <avagin@gmail.com>
Cc: Li Zefan <lizefan@huawei.com>
References: http://lkml.kernel.org/g/CANaxB-xUm3rJ-Cbp72q-rQJO5mZe1qK6qXsQM=vh0U8upJ44+A@mail.gmail.com
Fixes: 2bd59d48eb ("cgroup: convert to kernfs")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While updating how mmap enabled kernfs files are handled by lockdep,
9b2db6e189 ("sysfs: bail early from kernfs_file_mmap() to avoid
spurious lockdep warning") inadvertently dropped error return check
from kernfs_file_mmap(). The intention was just dropping "if
(ops->mmap)" check as the control won't reach the point if the mmap
callback isn't implemented, but I mistakenly removed the error return
check together with it.
This led to Xorg crash on i810 which was reported and bisected to the
commit and then to the specific change by Tobias.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: Tobias Powalowski <tobias.powalowski@googlemail.com>
Tested-by: Tobias Powalowski <tobias.powalowski@googlemail.com>
References: http://lkml.kernel.org/g/533D01BD.1010200@googlemail.com
Cc: stable <stable@vger.kernel.org> # 3.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_notify() is used to indicate either new data is available or
the content of a file has changed. It currently only triggers poll
which may not be the most convenient to monitor especially when there
are a lot to monitor. Let's hook it up to fsnotify too so that the
events can be monitored via inotify too.
fsnotify_modify() requires file * but kernfs_notify() doesn't have any
specific file associated; however, we can walk all super_blocks
associated with a kernfs_root and as kernfs always associate one ino
with inode and one dentry with an inode, it's trivial to look up the
dentry associated with a given kernfs_node. As any active monitor
would pin dentry, just looking up existing dentry is enough. This
patch looks up the dentry associated with the specified kernfs_node
and generates events equivalent to fsnotify_modify().
Note that as fsnotify doesn't provide fsnotify_modify() equivalent
which can be called with dentry, kernfs_notify() directly calls
fsnotify_parent() and fsnotify(). It might be better to add a wrapper
in fsnotify.h instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A write to a kernfs_node is buffered through a kernel buffer. Writes
<= PAGE_SIZE are performed atomically, while larger ones are executed
in PAGE_SIZE chunks. While this is enough for sysfs, cgroup which is
scheduled to be converted to use kernfs needs a bit more control over
it.
This patch adds kernfs_ops->atomic_write_len. If not set (zero), the
behavior stays the same. If set, writes upto the size are executed
atomically and larger writes are rejected with -E2BIG.
A different implementation strategy would be allowing configuring
chunking size while making the original write size available to the
write method; however, such strategy, while being more complicated,
doesn't really buy anything. If the write implementation has to
handle chunking, the specific chunk size shouldn't matter all that
much.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_addrm_cxt and the accompanying kernfs_addrm_start/finish() were
added because there were operations which should be performed outside
kernfs_mutex after adding and removing kernfs_nodes. The necessary
operations were recorded in kernfs_addrm_cxt and performed by
kernfs_addrm_finish(); however, after the recent changes which
relocated deactivation and unmapping so that they're performed
directly during removal, the only operation kernfs_addrm_finish()
performs is kernfs_put(), which can be moved inside the removal path
too.
This patch moves the kernfs_put() of the base ref to __kernfs_remove()
and remove kernfs_addrm_cxt and kernfs_addrm_start/finish().
* kernfs_add_one() is updated to grab and release kernfs_mutex itself.
sysfs_addrm_start/finish() invocations around it are removed from
all users.
* __kernfs_remove() puts an unlinked node directly instead of chaining
it to kernfs_addrm_cxt. Its callers are updated to grab and release
kernfs_mutex instead of calling kernfs_addrm_start/finish() around
it.
v2: Rebased on top of "kernfs: associate a new kernfs_node with its
parent on creation" which dropped @parent from kernfs_add_one().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once created, a kernfs_node is always destroyed by kernfs_put().
Since ba7443bc65 ("sysfs, kernfs: implement
kernfs_create/destroy_root()"), kernfs_put() depends on kernfs_root()
to locate the ino_ida. kernfs_root() in turn depends on
kernfs_node->parent being set for !dir nodes. This means that
kernfs_put() of a !dir node requires its ->parent to be initialized.
This leads to oops when a newly created !dir node is destroyed without
going through kernfs_add_one() or after failing kernfs_add_one()
before ->parent is set. kernfs_root() invoked from kernfs_put() will
try to dereference NULL parent.
Fix it by moving parent association to kernfs_new_node() from
kernfs_add_one(). kernfs_new_node() now takes @parent instead of
@root and determines the root from the parent and also sets the new
node's parent properly. @parent parameter is removed from
kernfs_add_one(). As there's no parent when creating the root node,
__kernfs_new_node() which takes @root as before and doesn't set the
parent is used in that case.
This ensures that a kernfs_node in any stage in its life has its
parent associated and thus can be put.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kernfs_seq_start() fails to obtain an active reference, it
returns ERR_PTR(-ENODEV). kernfs_seq_stop() is then invoked with the
error pointer value; however, it still proceeds to invoke
kernfs_put_active() on the node leading to unbalanced put.
If kernfs_seq_stop() is called even after active ref failure, it
should skip invocation of @ops->seq_stop() and put_active.
Unfortunately, this is a bit complicated because active ref failure
isn't the only thing which may fail with ERR_PTR(-ENODEV).
@ops->seq_start/next() may also fail with the error value and
kernfs_seq_stop() doesn't have a way to tell apart those failures.
Work it around by factoring out the active part of kernfs_seq_stop()
into kernfs_seq_stop_active() and invoking it directly if
@ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating
kernfs_seq_stop() to skip kernfs_seq_stop_active() on
ERR_PTR(-ENODEV). This is a bit nasty but ensures that the active put
is skipped iff get_active failed in kernfs_seq_start().
tj: This was originally committed as d92d2e6bd7 but got reverted by
683bb2761f along with other kernfs self removal patches.
However, this one is an independent fix and shouldn't have been
reverted together. Reinstate the change. Sorry about the mess.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d92d2e6bd7.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ae34372eb8.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit f601f9a2bf.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 99177a3411.
Tejun writes:
I'm sorry but can you please revert the whole series?
get_active() waiting while a node is deactivated has potential
to lead to deadlock and that deactivate/reactivate interface is
something fundamentally flawed and that cgroup will have to work
with the remove_self() like everybody else. IOW, I think the
first posting was correct.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_addrm_cxt and the accompanying kernfs_addrm_start/finish() were
added because there were operations which should be performed outside
kernfs_mutex after adding and removing kernfs_nodes. The necessary
operations were recorded in kernfs_addrm_cxt and performed by
kernfs_addrm_finish(); however, after the recent changes which
relocated deactivation and unmapping so that they're performed
directly during removal, the only operation kernfs_addrm_finish()
performs is kernfs_put(), which can be moved inside the removal path
too.
This patch moves the kernfs_put() of the base ref to __kernfs_remove()
and remove kernfs_addrm_cxt and kernfs_addrm_start/finish().
* kernfs_add_one() is updated to grab and release the parent's active
ref and kernfs_mutex itself. kernfs_get/put_active() and
kernfs_addrm_start/finish() invocations around it are removed from
all users.
* __kernfs_remove() puts an unlinked node directly instead of chaining
it to kernfs_addrm_cxt. Its callers are updated to grab and release
kernfs_mutex instead of calling kernfs_addrm_start/finish() around
it.
v2: Updated to fit the v2 restructuring of removal path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_unmap_bin_file() is supposed to unmap all memory mappings of
the target file before kernfs_remove() finishes; however, it currently
is being called from kernfs_addrm_finish() and has the same race
problem as the original implementation of deactivation when there are
multiple removers - only the remover which snatches the node to its
addrm_cxt->removed list is guaranteed to wait for its completion
before returning.
It can be fixed by moving kernfs_unmap_bin_file() invocation from
kernfs_addrm_finish() to __kernfs_remove(). The function may be
called multiple times but that shouldn't do any harm.
We end up dropping kernfs_mutex in the removal loop and the node may
be removed inbetween by someone else. kernfs_unlink_sibling() is
updated to test whether the node has already been removed and return
accordingly. __kernfs_remove() in turn performs post-unlinking
cleanup only if it actually unlinked the node.
KERNFS_HAS_MMAP test is moved out of the unmap function into
__kernfs_remove() so that we don't unlock kernfs_mutex unnecessarily.
While at it, drop the now meaningless "bin" qualifier from the
function name.
v2: Rewritten to fit the v2 restructuring of removal path. HAS_MMAP
test relocated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KERNFS_REMOVED is used to mark half-initialized and dying nodes so
that they don't show up in lookups and deny adding new nodes under or
renaming it; however, its role overlaps those of deactivation and
removal from rbtree.
It's necessary to deny addition of new children while removal is in
progress; however, this role considerably intersects with deactivation
- KERNFS_REMOVED prevents new children while deactivation prevents new
file operations. There's no reason to have them separate making
things more complex than necessary.
KERNFS_REMOVED is also used to decide whether a node is still visible
to vfs layer, which is rather redundant as equivalent determination
can be made by testing whether the node is on its parent's children
rbtree or not.
This patch removes KERNFS_REMOVED.
* Instead of KERNFS_REMOVED, each node now starts its life
deactivated. This means that we now use both atomic_add() and
atomic_sub() on KN_DEACTIVATED_BIAS, which is INT_MIN. The compiler
generates an overflow warnings when negating INT_MIN as the negation
can't be represented as a positive number. Nothing is actually
broken but let's bump BIAS by one to avoid the warnings for archs
which negates the subtrahend..
* KERNFS_REMOVED tests in add and rename paths are replaced with
kernfs_get/put_active() of the target nodes. Due to the way the add
path is structured now, active ref handling is done in the callers
of kernfs_add_one(). This will be consolidated up later.
* kernfs_remove_one() is updated to deactivate instead of setting
KERNFS_REMOVED. This removes deactivation from kernfs_deactivate(),
which is now renamed to kernfs_drain().
* kernfs_dop_revalidate() now tests RB_EMPTY_NODE(&kn->rb) instead of
KERNFS_REMOVED and KERNFS_REMOVED test in kernfs_dir_pos() is
dropped. A node which is removed from the children rbtree is not
included in the iteration in the first place. This means that a
node may be visible through vfs a bit longer - it's now also visible
after deactivation until the actual removal. This slightly enlarged
window difference doesn't make any difference to the userland.
* Sanity check on KERNFS_REMOVED in kernfs_put() is replaced with
checks on the active ref.
* Some comment style updates in the affected area.
v2: Reordered before removal path restructuring. kernfs_active()
dropped and kernfs_get/put_active() used instead. RB_EMPTY_NODE()
used in the lookup paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kernfs_seq_start() fails to obtain an active reference, it
returns ERR_PTR(-ENODEV). kernfs_seq_stop() is then invoked with the
error pointer value; however, it still proceeds to invoke
kernfs_put_active() on the node leading to unbalanced put.
If kernfs_seq_stop() is called even after active ref failure, it
should skip invocation of @ops->seq_stop() and put_active.
Unfortunately, this is a bit complicated because active ref failure
isn't the only thing which may fail with ERR_PTR(-ENODEV).
@ops->seq_start/next() may also fail with the error value and
kernfs_seq_stop() doesn't have a way to tell apart those failures.
Work it around by factoring out the active part of kernfs_seq_stop()
into kernfs_seq_stop_active() and invoking it directly if
@ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating
kernfs_seq_stop() to skip kernfs_seq_stop_active() on
ERR_PTR(-ENODEV). This is a bit nasty but ensures that the active put
is skipped iff get_active failed in kernfs_seq_start().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because sysfs used struct attribute which are supposed to stay
constant, sysfs didn't copy names when creating regular files. The
specified string for name was supposed to stay constant. Such
distinction isn't inherent for kernfs. kernfs_create_file[_ns]()
should be able to take the same @name as kernfs_create_dir[_ns]()
As there can be huge number of sysfs attributes, we still want to be
able to use static names for sysfs attributes. This patch renames
kernfs_create_file_ns_key() to __kernfs_create_file() and adds
@name_is_static parameter so that the caller can explicitly indicate
that @name can be used without copying. kernfs is updated to use
KERNFS_STATIC_NAME to distinguish static and copied names.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_*()/kernfs_*()/ in all internal functions
* s/sysfs/kernfs/ in internal strings, comments and whatever is remaining
* Uniformly rename various vfs operations so that they're consistently
named and distinguishable.
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_mutex/kernfs_mutex/
* s/sysfs_dentry_ops/kernfs_dops/
* s/sysfs_dir_operations/kernfs_dir_fops/
* s/sysfs_dir_inode_operations/kernfs_dir_iops/
* s/kernfs_file_operations/kernfs_file_fops/ - renamed for consistency
* s/sysfs_symlink_inode_operations/kernfs_symlink_iops/
* s/sysfs_aops/kernfs_aops/
* s/sysfs_backing_dev_info/kernfs_bdi/
* s/sysfs_inode_operations/kernfs_iops/
* s/sysfs_dir_cachep/kernfs_node_cache/
* s/sysfs_ops/kernfs_sops/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/SYSFS_DIR/KERNFS_DIR/
* s/SYSFS_KOBJ_ATTR/KERNFS_FILE/
* s/SYSFS_KOBJ_LINK/KERNFS_LINK/
* s/SYSFS_{TYPE_FLAGS}/KERNFS_{TYPE_FLAGS}/
* s/SYSFS_FLAG_{FLAG}/KERNFS_{FLAG}/
* s/sysfs_type()/kernfs_type()/
* s/SD_DEACTIVATED_BIAS/KN_DEACTIVATED_BIAS/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_open_dirent/kernfs_open_node/
* s/sysfs_open_file/kernfs_open_file/
* s/sysfs_inode_attrs/kernfs_iattrs/
* s/sysfs_addrm_cxt/kernfs_addrm_cxt/
* s/sysfs_super_info/kernfs_super_info/
* s/sysfs_info()/kernfs_info()/
* s/sysfs_open_dirent_lock/kernfs_open_node_lock/
* s/sysfs_open_file_mutex/kernfs_open_file_mutex/
* s/sysfs_of()/kernfs_of()/
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
s_ prefix for kernfs members is used inconsistently and a misnomer
now. It's not like kernfs_node is used widely across the kernel
making the ability to grep for the members particularly useful. Let's
just drop the prefix.
This patch is strictly rename only and doesn't introduce any
functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs has just been separated out from sysfs and we're already in
full conflict mode. Nothing can make the situation any worse. Let's
take the chance to name things properly.
This patch performs the following renames.
* s/sysfs_elem_dir/kernfs_elem_dir/
* s/sysfs_elem_symlink/kernfs_elem_symlink/
* s/sysfs_elem_attr/kernfs_elem_file/
* s/sysfs_dirent/kernfs_node/
* s/sd/kn/ in kernfs proper
* s/parent_sd/parent/
* s/target_sd/target/
* s/dir_sd/parent/
* s/to_sysfs_dirent()/rb_to_kn()/
* misc renames of local vars when they conflict with the above
Because md, mic and gpio dig into sysfs details, this patch ends up
modifying them. All are sysfs_dirent renames and trivial. While we
can avoid these by introducing a dummy wrapping struct sysfs_dirent
around kernfs_node, given the limited usage outside kernfs and sysfs
proper, I don't think such workaround is called for.
This patch is strictly rename only and doesn't introduce any
functional difference.
- mic / gpio renames were missing. Spotted by kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is v3.14 fix for the same issue that a8b1474442 ("sysfs: give
different locking key to regular and bin files") addresses for v3.13.
Due to the extensive kernfs reorganization in v3.14 branch, the same
fix couldn't be ported as-is. The v3.13 fix was ignored while merging
it into v3.14 branch.
027a485d12 ("sysfs: use a separate locking class for open files
depending on mmap") assigned different lockdep key to
sysfs_open_file->mutex depending on whether the file implements mmap
or not in an attempt to avoid spurious lockdep warning caused by
merging of regular and bin file paths.
While this restored some of the original behavior of using different
locks (at least lockdep is concerned) for the different clases of
files. The restoration wasn't full because now the lockdep key
assignment depends on whether the file has mmap or not instead of
whether it's a regular file or not.
This means that bin files which don't implement mmap will get assigned
the same lockdep class as regular files. This is problematic because
file_operations for bin files still implements the mmap file operation
and checking whether the sysfs file actually implements mmap happens
in the file operation after grabbing @sysfs_open_file->mutex. We
still end up adding locking dependency from mmap locking to
sysfs_open_file->mutex to the regular file mutex which triggers
spurious circular locking warning.
For v3.13, a8b1474442 ("sysfs: give different locking key to regular
and bin files") fixed it by giving sysfs_open_file->mutex different
lockdep keys depending on whether the file is regular or bin instead
of whether mmap exists or not; however, due to the way sysfs is now
layered behind kernfs, this approach is no longer viable. kernfs can
tell whether a sysfs node has mmap implemented or not but can't tell
whether a bin file from a regular one.
This patch updates kernfs such that kernfs_file_mmap() checks
SYSFS_FLAG_HAS_MMAP and bail before grabbing sysfs_open_file->mutex so
that it doesn't add spurious locking dependency from mmap to
sysfs_open_file->mutex and changes sysfs so that it specifies
kernfs_ops->mmap iff the sysfs file implements mmap. Combined, this
ensures that sysfs_open_file->mutex is grabbed under mmap path iff the
sysfs file actually implements mmap. As sysfs_open_file->mutex is
already given a different lockdep key if mmap is implemented, this
removes the spurious locking dependency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <davej@redhat.com>
Link: http://lkml.kernel.org/g/20131203184324.GA11320@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs is being updated to allow multiple sysfs_dirent hierarchies so
that it can also be used by other users. Currently, inode number is
allocated using a global ida, sysfs_ino_ida; however, inos for
different hierarchies should be handled separately.
This patch makes ino allocation per kernfs_root. sysfs_ino_ida is
replaced by kernfs_root->ino_ida and sysfs_new_dirent() is updated to
take @root and allocate ino from it. ida_simple_get/remove() are used
instead of sysfs_ino_lock and sysfs_alloc/free_ino().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
