Commit Graph

542 Commits

Author SHA1 Message Date
Mat Martineau
cff70fae11 Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM
remote_tx_win is intended to be set on receipt of an L2CAP
configuration request.  The value is used to determine the size of the
transmit window on the remote side of an ERTM connection, so L2CAP
can stop sending frames when that remote window is full.

An incorrect remote_tx_win value will cause the stack to not fully
utilize the tx window (performance impact), or to overfill the remote
tx window (causing dropped frames or a disconnect).

This patch removes an extra setting of remote_tx_win when a
configuration response is received.  The transmit window has a
different meaning in a response - it is an informational value
less than or equal to the local tx_win.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10 07:59:11 -04:00
Mat Martineau
86b1b26326 Bluetooth: Fix endianness issue with L2CAP MPS configuration
Incoming configuration values must be converted to native CPU order
before use.  This fixes a bug where a little-endian MPS value is
compared to a native CPU value.  On big-endian processors, this
can cause ERTM and streaming mode segmentation to produce PDUs
that are larger than the remote stack is expecting, or that would
produce fragmented skbs that the current FCS code cannot handle.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10 07:59:09 -04:00
Ville Tervo
adb08edea0 Bluetooth: Check result code of L2CAP information response
Check result code of L2CAP information response. Otherwise
it would read invalid feature mask and access invalid memory.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04 07:25:17 -07:00
Gustavo F. Padovan
6340650400 Bluetooth: Don't send RFC for Basic Mode if only it is supported
If the remote side doesn't support Enhanced Retransmission Mode neither
Streaming Mode, we shall not send the RFC option.

Some devices that only supports Basic Mode do not understanding the RFC
option. This patch fixes the regression found with these devices.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04 07:23:00 -07:00
Gustavo F. Padovan
28e9509b12 Bluetooth: Remove __exit from rfcomm_cleanup_ttys()
rfcomm_cleanup_ttys() is also called from rfcomm_init(), so it can't
have __exit.

Reported-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-31 16:09:21 -07:00
David Miller
ea4bd8ba80 Bluetooth: Use list_head for HCI blacklist head
The bdaddr in the list root is completely unused and just
taking up space.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-31 16:06:58 -07:00
Gustavo F. Padovan
2f8362afcd Bluetooth: Add __init and __exit marks to RFCOMM
Those annotation save memory and space on the binary. __init code is
discarded just after execute and __exit code is discarded if the module
is built into the kernel image or unload of modules is not allowed.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27 12:37:27 -07:00
Gustavo F. Padovan
da5f6c37ee Bluetooth: Test 'count' value before enter the loop
Testing first we avoid enter the loop when count = 0.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27 12:33:49 -07:00
Marcel Holtmann
e73439d8c0 Bluetooth: Defer SCO setup if mode change is pending
Certain headsets such as the Motorola H350 will reject SCO and eSCO
connection requests while the ACL is transitioning from sniff mode
to active mode. Add synchronization so that SCO and eSCO connection
requests will wait until the ACL has fully transitioned to active mode.

< HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2
    handle 12
> HCI Event: Command Status (0x0f) plen 4
    Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1
< HCI Command:  Setup Synchronous Connection (0x01|0x0028) plen 17
    handle 12 voice setting 0x0040
> HCI Event: Command Status (0x0f) plen 4
    Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 12 packets 1
> HCI Event: Mode Change (0x14) plen 6
    status 0x00 handle 12 mode 0x00 interval 0
    Mode: Active
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
    status 0x10 handle 14 bdaddr 00:1A:0E:50:28:A4 type SCO
    Error: Connection Accept Timeout Exceeded

Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27 12:29:04 -07:00
Gustavo F. Padovan
d1c4a17d58 Bluetooth: Enable L2CAP Extended features by default
Change the enable_ertm param to disable_ertm and default value to 0. That
means that L2CAP Extended features are enabled by default now.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:13 -07:00
Gustavo F. Padovan
893ef97112 Bluetooth: Fix typo in hci_event.c
memmory -> memory

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:13 -07:00
Gustavo F. Padovan
5d8868ff3d Bluetooth: Add Google's copyright to L2CAP
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:12 -07:00
Suraj Sumangala
9981151086 Bluetooth: Implemented HCI frame reassembly for RX from stream
Implemented frame reassembly implementation for reassembling fragments
received from stream.

Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:12 -07:00
Suraj Sumangala
f39a3c0640 Bluetooth: Modified hci_recv_fragment() to use hci_reassembly helper
Modified packet based reassembly function hci_recv_fragment() to use
hci_reassembly()

Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:12 -07:00
Suraj Sumangala
33e882a5f2 Bluetooth: Implement hci_reassembly helper to reassemble RX packets
Implements feature to reassemble received HCI frames from any input stream

Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:12 -07:00
Suraj Sumangala
cd4c53919e Bluetooth: Add one more buffer for HCI stream reassembly
Additional reassembly buffer to keep track of stream reasembly

Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:12 -07:00
Gustavo F. Padovan
dd135240e8 Bluetooth: Update L2CAP version information
We did some changes on the L2CAP configuration process and its behaviour
is bit different now. That justifies a updated on the L2CAP version.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:12 -07:00
Gustavo F. Padovan
ce5706bd69 Bluetooth: Add Copyright notice to L2CAP
Copyright for the time I worked on L2CAP during the Google Summer of Code
program.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:11 -07:00
Gustavo F. Padovan
47731de789 Bluetooth: Keep code under column 80
Purely a cosmetic change, it doesn't change the code flow.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:11 -07:00
Gustavo F. Padovan
89746b856c Bluetooth: Fix bug in kzalloc allocation size
Probably a typo error. We were using the wrong struct to get size.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:11 -07:00
Gustavo F. Padovan
e9aeb2ddd4 Bluetooth: Send ConfigReq after send a ConnectionRsp
The extended L2CAP features requires that one should initiate a
ConfigReq after send the ConnectionRsp. This patch changes the behaviour
of the configuration process of our stack.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:11 -07:00
João Paulo Rechi Vita
963cf687e8 Bluetooth: Fix error return on L2CAP-HCI interface.
L2CAP only deals with ACL links. EINVAL should be returned otherwise.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:10 -07:00
João Paulo Rechi Vita
7a560e5c99 Bluetooth: Fix error value for wrong FCS.
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:10 -07:00
João Paulo Rechi Vita
57d3b22bf5 Bluetooth: Fix error return for l2cap_connect_rsp().
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:10 -07:00
João Paulo Rechi Vita
bc766db2ef Bluetooth: Fix error return value on sendmsg.
When the socket is in a bad state EBADFD is more appropriate then EINVAL.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:10 -07:00
João Paulo Rechi Vita
f9dd11b03c Bluetooth: Fix error return value on sendmsg.
When we try to send a message bigger than the outgoing MTU value
EMSGSIZE (message too long) should be returned.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:10 -07:00
João Paulo Rechi Vita
305682e837 Bluetooth: Make l2cap_streaming_send() void.
It doesn't make sense to have a return value since we always set it
to 0.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:10 -07:00
João Paulo Rechi Vita
8b0dc6dc82 Bluetooth: Fix l2cap_sock_connect error return.
Return a proper error value if socket is already connected.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:10 -07:00
Gustavo F. Padovan
712132eb54 Bluetooth: Improve ERTM local busy handling
Now we also check if can push skb userspace just after receive a new
skb instead of only wait the l2cap_busy_work wake up from time to time
to check the local busy condition.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:09 -07:00
Gustavo F. Padovan
218bb9dfd2 Bluetooth: Add backlog queue to ERTM code
backlog queue is the canonical mechanism to avoid race conditions due
interrupts in bottom half context. After the socket lock is released the
net core take care of push all skb in its backlog queue.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:09 -07:00
Gustavo F. Padovan
e0f66218b3 Bluetooth: Remove the send_lock spinlock from ERTM
Using a lock to deal with the ERTM race condition - interruption with
new data from the hci layer - is wrong. We should use the native skb
backlog queue.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:09 -07:00
Gustavo F. Padovan
8cb8e6f168 Bluetooth: Don't accept ConfigReq if we aren't in the BT_CONFIG state
If such event happens we shall reply with a Command Reject, because we are
not expecting any configure request.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:09 -07:00
Gustavo F. Padovan
cf6c2c0b9f Bluetooth: Disconnect early if mode is not supported
When mode is mandatory we shall not send connect request and report this
to the userspace as well.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:09 -07:00
Gustavo F. Padovan
2ba13ed678 Bluetooth: Remove check for supported mode
Since now we have checks for the supported mode before on
l2cap_info_rsp we can remove the check for it here.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:08 -07:00
Gustavo F. Padovan
6c2ea7a8f5 Bluetooth: Refuse ConfigRsp with different mode
If our mode is Basic Mode we have to refuse any ConfigRsp that proposes
a different mode.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:08 -07:00
Gustavo F. Padovan
625477523b Bluetooth: Actively send request for Basic Mode
The Profile Tuning Suite requires that we send a RFC containing the
Basic Mode configuration when requesting Basic Mode.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:08 -07:00
Gustavo F. Padovan
ae12d52efd Bluetooth: Prefer Basic Mode on receipt of ConfigReq
If we choose to use Basic Mode then we have to refuse the received mode
and propose Basic Mode again.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:08 -07:00
Gustavo F. Padovan
742e519b0d Bluetooth: Disconnect the channel if we don't want the proposed mode
If the device is a STATE 2 then it should disconnect the channel if the
remote device propose a mode different from its mandatory mode.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:08 -07:00
Gustavo F. Padovan
85eb53c6f7 Bluetooth: Change the way we set ERTM mode as mandatory
If the socket type is SOCK_STREAM we set Enhanced Retransmisson Mode or
Streaming Mode as mandatory. That means that we will close the channel
if the other side doesn't support or request the the mandatory mode.
Basic mode can't be set as mandatory.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:07 -07:00
Gustavo F. Padovan
6498886863 Bluetooth: Tweaks to l2cap_send_i_or_rr_or_rnr() flow
l2cap_send_sframe() already set the F-bit if we set L2CAP_CONN_SEND_FBIT
and unset L2CAP_CONN_SEND_FBIT after send the F-bit.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:07 -07:00
Gustavo F. Padovan
0e98958d4f Bluetooth: Add debug output to ERTM code
Use the dynamic debug to output info about ERTM protocol stuff.
The following script can be used to enable debug for ERTM:

DEBUGFS="/sys/kernel/debug/dynamic_debug/control"

echo -n 'func l2cap_send_disconn_req +p' > $DEBUGFS
echo -n 'func l2cap_monitor_timeout +p' > $DEBUGFS
echo -n 'func l2cap_retrans_timeout +p' > $DEBUGFS
echo -n 'func l2cap_busy_work  +p' > $DEBUGFS
echo -n 'func l2cap_push_rx_skb +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_iframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_rrframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_rejframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_srejframe +p' > $DEBUGFS
echo -n 'func l2cap_data_channel_rnrframe +p' > $DEBUGFS

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:07 -07:00
Gustavo F. Padovan
9b108fc0cf Bluetooth: Fix ERTM error reporting to the userspace
If any error occurs during transfers we have to tell userspace that
something wrong happened.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:07 -07:00
Gustavo F. Padovan
4ea727ef9d Bluetooth: Fix missing retransmission action with RR(P=1)
The Bluetooth SIG Profile Tuning Suite Software uses the CSA1 spec
to run the L2CAP tests. The new 3.0 spec has a missing
Retransmit-I-Frames action when the Remote side is Busy.
We still start the retransmission timer if Remote is Busy and unacked
frames > 0. We do everything we did before this change plus the
Retransmission of I-frames.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:07 -07:00
Gustavo F. Padovan
2600008967 Bluetooth: Check packet FCS earlier
This way, if FCS is enabled and the packet is corrupted, we just drop it
without read it len, which could be corrupted.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:07 -07:00
Gustavo F. Padovan
45d65c46ac Bluetooth: Check the tx_window size on setsockopt
We have to check if the proposed tx_window value is not greater that
maximum value supported.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:07 -07:00
Gustavo F. Padovan
3cb123d1c0 Bluetooth: Fix handle of received P-bit
ERTM spec mandates that after receive a P-bit we shall send an F-bit in
response. This patch fixes this for retransmitted packets, on
retransmitting we were missing to check for a pending F-bit to be sent.
Also we were missing some annotation to send a F-bit.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:06 -07:00
Gustavo F. Padovan
2ece3684b4 Bluetooth: Update buffer_seq before retransmit frames
Updating buffer_seq first make us able to ack the last I-frame received.
This is also a requirement of the  Profile Tuning Suite software.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:06 -07:00
Gustavo F. Padovan
7fe9b298c9 Bluetooth: Stop ack_timer if ERTM enters in Local Busy or SREJ_SENT
The ack_timer is implemation specific, disabling it in such situation
avoids some potencial errors in the ERTM protocol.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:06 -07:00
Ron Shaffer
2d0a03460a Bluetooth: Reassigned copyright to Code Aurora Forum
Qualcomm, Inc. has reassigned rights to Code Aurora Forum. Accordingly,
as files are modified by Code Aurora Forum members, the copyright
statement will be updated.

Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:06 -07:00
Johan Hedberg
32c2ece5ea Bluetooth: Add debugfs support for showing the blacklist
This patch adds a debugfs blacklist entry for each HCI device which can
be used to list the current content of the blacklist.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:05 -07:00