Introduce hierarchical task accounting for the group scheduling case in CFS, as
well as promoting the responsibility for maintaining rq->nr_running to the
scheduling classes.
The primary motivation for this is that with scheduling classes supporting
bandwidth throttling it is possible for entities participating in throttled
sub-trees to not have root visible changes in rq->nr_running across activate
and de-activate operations. This in turn leads to incorrect idle and
weight-per-task load balance decisions.
This also allows us to make a small fixlet to the fastpath in pick_next_task()
under group scheduling.
Note: this issue also exists with the existing sched_rt throttling mechanism.
This patch does not address that.
Signed-off-by: Paul Turner <pjt@google.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110721184756.878333391@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since [sched/cpupri: Remove the vec->lock], member pri_active
of struct cpupri is not needed any more, just remove it. Also
clean stuff related to it.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110806001004.GA2207@zhy
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ This patch actually compiles. Thanks to Mike Galbraith for pointing
that out. I compiled and booted this patch with no issues. ]
Re-examining the cpupri patch, I see there's a possible race because the
update of the two priorities vec->counts are not protected by a memory
barrier.
When a RT runqueue is overloaded and wants to push an RT task to another
runqueue, it scans the RT priority vectors in a loop from lowest
priority to highest.
When we queue or dequeue an RT task that changes a runqueue's highest
priority task, we update the vectors to show that a runqueue is rated at
a different priority. To do this, we first set the new priority mask,
and increment the vec->count, and then set the old priority mask by
decrementing the vec->count.
If we are lowering the runqueue's RT priority rating, it will trigger a
RT pull, and we do not care if we miss pushing to this runqueue or not.
But if we raise the priority, but the priority is still lower than an RT
task that is looking to be pushed, we must make sure that this runqueue
is still seen by the push algorithm (the loop).
Because the loop reads from lowest to highest, and the new priority is
set before the old one is cleared, we will either see the new or old
priority set and the vector will be checked.
But! Since there's no memory barrier between the updates of the two, the
old count may be decremented first before the new count is incremented.
This means the loop may see the old count of zero and skip it, and also
the new count of zero before it was updated. A possible runqueue that
the RT task could move to could be missed.
A conditional memory barrier is placed between the vec->count updates
and is only called when both updates are done.
The smp_wmb() has also been changed to smp_mb__before_atomic_inc/dec(),
as they are not needed by archs that already synchronize
atomic_inc/dec().
The smp_rmb() has been moved to be called at every iteration of the loop
so that the race between seeing the two updates is visible by each
iteration of the loop, as an arch is free to optimize the reading of
memory of the counters in the loop.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1312547269.18583.194.camel@gandalf.stny.rr.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sched/cpupri: Remove the vec->lock
The cpupri vec->lock has been showing up as a top contention
lately. This is because of the RT push/pull logic takes an
agressive approach for migrating RT tasks. The cpupri logic is
in place to improve the performance of the push/pull when dealing
with large number CPU machines.
The problem though is a vec->lock is required, where a vec is a
global per RT priority structure. That is, if there are lots of
RT tasks at the same priority, every time they are added or removed
from the RT queue, this global vec->lock is taken. Now that more
kernel threads are becoming RT (RCU boost and threaded interrupts)
this is becoming much more of an issue.
There are two variables that are being synced by the vec->lock.
The cpupri bitmask, and the vec->counter. The cpupri bitmask
is one bit per priority. If a RT priority vec has a process queued,
then the vec->count is > 0 and the cpupri bitmask is set for that
RT priority.
If the cpupri bitmask gets out of sync with the vec->counter, we could
end up pushing a low proirity RT task to a high priority queue.
That RT task that could have run immediately could be queued on a
run queue with a higher priority task indefinitely.
The solution is not to use the cpupri bitmask and just look at the
vec->count directly when doing a pull. The cpupri bitmask is just
a fast way to scan the RT priorities when a pull is made. Instead
of using the bitmask, and just examine all RT priorities, and
look at the vec->counts, we could eliminate the vec->lock. The
scan of RT tasks is to find a run queue that we can push an RT task
to, and we do not push to a high priority queue, thus the scan only
needs to go from 1 to RT task->prio, and not all 100 RT priorities.
The push algorithm, which does the scan of RT priorities (and
scan of the bitmask) only happens when we have an overloaded RT run
queue (more than one RT task queued). The grabbing of the vec->lock
happens every time any RT task is queued or dequeued on the run
queue for that priority. The slowing down of the scan by not using
a bitmask is negligible by the speed up of removing the vec->lock
contention, and replacing it with an atomic counter and memory barrier.
To prove this, I wrote a patch that times both the loop and the code
that grabs the vec->locks. I passed the patches to various people
(and companies) to test and show the results. I let everyone choose
their own load to test, giving different loads on the system,
for various different setups.
Here's some of the results: (snipping to a few CPUs to not make
this change log huge, but the results were consistent across
the entire system).
System 1 (24 CPUs)
Before patch:
CPU: Name Count Max Min Average Total
---- ---- ----- --- --- ------- -----
[...]
cpu 20: loop 3057 1.766 0.061 0.642 1963.170
vec 6782949 90.469 0.089 0.414 2811760.503
cpu 21: loop 2617 1.723 0.062 0.641 1679.074
vec 6782810 90.499 0.089 0.291 1978499.900
cpu 22: loop 2212 1.863 0.063 0.699 1547.160
vec 6767244 85.685 0.089 0.435 2949676.898
cpu 23: loop 2320 2.013 0.062 0.594 1380.265
vec 6781694 87.923 0.088 0.431 2928538.224
After patch:
cpu 20: loop 2078 1.579 0.061 0.533 1108.006
vec 6164555 5.704 0.060 0.143 885185.809
cpu 21: loop 2268 1.712 0.065 0.575 1305.248
vec 6153376 5.558 0.060 0.187 1154960.469
cpu 22: loop 1542 1.639 0.095 0.533 823.249
vec 6156510 5.720 0.060 0.190 1172727.232
cpu 23: loop 1650 1.733 0.068 0.545 900.781
vec 6170784 5.533 0.060 0.167 1034287.953
All times are in microseconds. The 'loop' is the amount of time spent
doing the loop across the priorities (before patch uses bitmask).
the 'vec' is the amount of time in the code that requires grabbing
the vec->lock. The second patch just does not have the vec lock, but
encompasses the same code.
Amazingly the loop code even went down on average. The vec code went
from .5 down to .18, that's more than half the time spent!
Note, more than one test was run, but they all had the same results.
System 2 (64 CPUs)
Before patch:
CPU: Name Count Max Min Average Total
---- ---- ----- --- --- ------- -----
cpu 60: loop 0 0 0 0 0
vec 5410840 277.954 0.084 0.782 4232895.727
cpu 61: loop 0 0 0 0 0
vec 4915648 188.399 0.084 0.570 2803220.301
cpu 62: loop 0 0 0 0 0
vec 5356076 276.417 0.085 0.786 4214544.548
cpu 63: loop 0 0 0 0 0
vec 4891837 170.531 0.085 0.799 3910948.833
After patch:
cpu 60: loop 0 0 0 0 0
vec 5365118 5.080 0.021 0.063 340490.267
cpu 61: loop 0 0 0 0 0
vec 4898590 1.757 0.019 0.071 347903.615
cpu 62: loop 0 0 0 0 0
vec 5737130 3.067 0.021 0.119 687108.734
cpu 63: loop 0 0 0 0 0
vec 4903228 1.822 0.021 0.071 348506.477
The test run during the measurement did not have any (very few,
from other CPUs) RT tasks pushing. But this shows that it helped
out tremendously with the contention, as the contention happens
because the vec->lock is taken only on queuing at an RT priority,
and different CPUs that queue tasks at the same priority will
have contention.
I tested on my own 4 CPU machine with the following results:
Before patch:
CPU: Name Count Max Min Average Total
---- ---- ----- --- --- ------- -----
cpu 0: loop 2377 1.489 0.158 0.588 1398.395
vec 4484 770.146 2.301 4.396 19711.755
cpu 1: loop 2169 1.962 0.160 0.576 1250.110
vec 4425 152.769 2.297 4.030 17834.228
cpu 2: loop 2324 1.749 0.155 0.559 1299.799
vec 4368 779.632 2.325 4.665 20379.268
cpu 3: loop 2325 1.629 0.157 0.561 1306.113
vec 4650 408.782 2.394 4.348 20222.577
After patch:
CPU: Name Count Max Min Average Total
---- ---- ----- --- --- ------- -----
cpu 0: loop 2121 1.616 0.113 0.636 1349.189
vec 4303 1.151 0.225 0.421 1811.966
cpu 1: loop 2130 1.638 0.178 0.644 1372.927
vec 4627 1.379 0.235 0.428 1983.648
cpu 2: loop 2056 1.464 0.165 0.637 1310.141
vec 4471 1.311 0.217 0.433 1937.927
cpu 3: loop 2154 1.481 0.162 0.601 1295.083
vec 4236 1.253 0.230 0.425 1803.008
This was running my migrate.c code that can be found at:
http://lwn.net/Articles/425763/
The migrate code does stress the RT tasks a bit. This shows that
the loop did increase a little after the patch, but not by much.
The vec code dropped dramatically. From 4.3us down to .42us.
That's a 10x improvement!
Tested-by: Mike Galbraith <mgalbraith@suse.de>
Tested-by: Luis Claudio R. Gonçalves <lgoncalv@redhat.com>
Tested-by: Matthew Hank Sabins<msabins@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Gregory Haskins <gregory.haskins@gmail.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Chris Mason <chris.mason@oracle.com>
Link: http://lkml.kernel.org/r/1312317372.18583.101.camel@gandalf.stny.rr.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Hillf Danton proposed a patch (see link) that cleaned up the
sched_rt code that calculates the priority of the next highest priority
task to be used in finding run queues to pull from.
His patch removed the calculating of the next prio to just use the current
prio when deteriming if we should examine a run queue to pull from. The problem
with his patch was that it caused more false checks. Because we check a run
queue for pushable tasks if the current priority of that run queue is higher
in priority than the task about to run on our run queue. But after grabbing
the locks and doing the real check, we find that there may not be a task
that has a higher prio task to pull. Thus the locks were taken with nothing to
do.
I added some trace_printks() to record when and how many times the run queue
locks were taken to check for pullable tasks, compared to how many times we
pulled a task.
With the current method, it was:
3806 locks taken vs 2812 pulled tasks
With Hillf's patch:
6728 locks taken vs 2804 pulled tasks
The number of times locks were taken to pull a task went up almost double with
no more success rate.
But his patch did get me thinking. When we look at the priority of the highest
task to consider taking the locks to do a pull, a failure to pull can be one
of the following: (in order of most likely)
o RT task was pushed off already between the check and taking the lock
o Waiting RT task can not be migrated
o RT task's CPU affinity does not include the target run queue's CPU
o RT task's priority changed between the check and taking the lock
And with Hillf's patch, the thing that caused most of the failures, is
the RT task to pull was not at the right priority to pull (not greater than
the current RT task priority on the target run queue).
Most of the above cases we can't help. But the current method does not check
if the next highest prio RT task can be migrated or not, and if it can not,
we still grab the locks to do the test (we don't find out about this fact until
after we have the locks). I thought about this case, and realized that the
pushable task plist that is maintained only holds RT tasks that can migrate.
If we move the calculating of the next highest prio task from the inc/dec_rt_task()
functions into the queuing of the pushable tasks, then we only measure the
priorities of those tasks that we push, and we get this basically for free.
Not only does this patch make the code a little more efficient, it cleans it
up and makes it a little simpler.
Thanks to Hillf Danton for inspiring me on this patch.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Gregory Haskins <ghaskins@novell.com>
Link: http://lkml.kernel.org/r/BANLkTimQ67180HxCx5vgMqumqw1EkFh3qg@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a new task is woken, the code to balance the RT task is currently
skipped in the select_task_rq() call. But it will be pushed if the rq
is currently overloaded with RT tasks anyway. The issue is that we
already queued the task, and if it does get pushed, it will have to
be dequeued and requeued on the new run queue. The advantage with
pushing it first is that we avoid this requeuing as we are pushing it
off before the task is ever queued.
See commit 318e0893ce ("sched: pre-route RT tasks on wakeup")
for more details.
The return of select_task_rq() when it is not a wake up has also been
changed to return task_cpu() instead of smp_processor_id(). This is more
of a sanity because the current only other user of select_task_rq()
besides wake ups, is an exec, where task_cpu() should also be the same
as smp_processor_id(). But if it is used for other purposes, lets keep
the task on the same CPU. Why would we mant to migrate it to the current
CPU?
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hillf Danton <dhillf@gmail.com>
Link: http://lkml.kernel.org/r/20110617015919.832743148@goodmis.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There's no reason to clean the exec_start in put_prev_task_rt() as it is reset
when the task gets back to the run queue. This saves us doing a store() in the
fast path.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Link: http://lkml.kernel.org/r/BANLkTimqWD=q6YnSDi-v9y=LMWecgEzEWg@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Do not call dequeue_pushable_task() when failing to push an eligible
task, as it remains pushable, merely not at this particular moment.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Mike Galbraith <mgalbraith@gmx.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Link: http://lkml.kernel.org/r/1306895385.4791.26.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Checking for the validity of sd is removed, since it is already
checked by the for_each_domain macro.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/BANLkTimT+Tut-3TshCDm-NiLLXrOznibNA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When computing the next priority for a given run-queue, the check for
RT priority of the task determined by the pick_next_highest_task_rt()
function could be removed, since only RT tasks are returned by the
function.
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/BANLkTimxmWiof9s5AvS3v_0X+sMiE=0x5g@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Setting child->prio = current->normal_prio _after_ SCHED_RESET_ON_FORK has
been handled for an RT parent gives birth to a deranged mutant child with
non-RT policy, but RT prio and sched_class.
Move PI leakage protection up, always set priorities and weight, and if the
child is leaving RT class, reset rt_priority to the proper value.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1311779695.8691.2.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the WAKEUP_PREEMPT feature, disabling it doesn't make any sense
and its outlived its use by a long long while.
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110729082033.GB12106@zhy
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since commit a2d47777 ("sched: fix stale value in average load per task")
the variable rq->avg_load_per_task is no longer required. Remove it.
Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312189408-17172-1-git-send-email-schnhrr@cs.tu-berlin.de
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just like files-layout, blocks & objects layouts are part of the
NFS 4.1 protocol and should be automatically selected if NFS_4_1
is selected. The small problem is that these depend on other
Kernel support being present, while files only depends on NFS
itself.
This patch removes from the user choice the presence of objects
and blocks layout. But makes sure these are selected only if
the depended subsystems are present in the Kernel.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit df5e622340 ("ext4: fix deadlock in ext4_symlink() in ENOSPC
conditions") recalculated the number of credits needed for a long
symlink, in the process of splitting it into two transactions. However,
the first credit calculation under-counted because if selinux is
enabled, credits are needed to create the selinux xattr as well.
Overrunning the reservation will result in an OOPS in
jbd2_journal_dirty_metadata() due to this assert:
J_ASSERT_JH(jh, handle->h_buffer_credits > 0);
Fix this by increasing the reservation size.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ae54870a1d ("ext3: Fix lock inversion in ext3_symlink()")
recalculated the number of credits needed for a long symlink, in the
process of splitting it into two transactions. However, the first
credit calculation under-counted because if selinux is enabled, credits
are needed to create the selinux xattr as well.
Overrunning the reservation will result in an OOPS in
journal_dirty_metadata() due to this assert:
J_ASSERT_JH(jh, handle->h_buffer_credits > 0);
Fix this by increasing the reservation size.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch http://lkml.org/lkml/2003/7/13/226 introduced an RLIMIT_NPROC
check in set_user() to check for NPROC exceeding via setuid() and
similar functions.
Before the check there was a possibility to greatly exceed the allowed
number of processes by an unprivileged user if the program relied on
rlimit only. But the check created new security threat: many poorly
written programs simply don't check setuid() return code and believe it
cannot fail if executed with root privileges. So, the check is removed
in this patch because of too often privilege escalations related to
buggy programs.
The NPROC can still be enforced in the common code flow of daemons
spawning user processes. Most of daemons do fork()+setuid()+execve().
The check introduced in execve() (1) enforces the same limit as in
setuid() and (2) doesn't create similar security issues.
Neil Brown suggested to track what specific process has exceeded the
limit by setting PF_NPROC_EXCEEDED process flag. With the change only
this process would fail on execve(), and other processes' execve()
behaviour is not changed.
Solar Designer suggested to re-check whether NPROC limit is still
exceeded at the moment of execve(). If the process was sleeping for
days between set*uid() and execve(), and the NPROC counter step down
under the limit, the defered execve() failure because NPROC limit was
exceeded days ago would be unexpected. If the limit is not exceeded
anymore, we clear the flag on successful calls to execve() and fork().
The flag is also cleared on successful calls to set_user() as the limit
was exceeded for the previous user, not the current one.
Similar check was introduced in -ow patches (without the process flag).
v3 - clear PF_NPROC_EXCEEDED on successful calls to set_user().
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf symbols: Check '/tmp/perf-' symbol file ownership
perf sched: Usage leftover from trace -> script rename
perf sched: Do not delete session object prematurely
perf tools: Check $HOME/.perfconfig ownership
perf, x86: Add model 45 SandyBridge support
perf tools: Add support to install perf python extension
perf tools: do not look at ./config for configuration
perf tools: Make clean leaves some files
perf lock: Dropping unsupported ':r' modifier
perf probe: Fix coredump introduced by probe module option
jump label: Reduce the cycle count by changing the link order
perf report: Use ui__warning in some more places
perf python: Add PERF_RECORD_{LOST,READ,SAMPLE} routine tables
perf evlist: Introduce 'disable' method
trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED
perf buildid-cache: Zero out buffer of filenames when adding/removing buildid
Change to new git tree -
(git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git).
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit af9d220bac.
It turns out that one was meant to be applied on top of the edac.git
tree in -next that has more i7core_edac changes, but that wasn't clear
in the original email.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PNFS_BLOCK needs BLK_DEV_DM/MD, which is not a dependency for other
pnfs layout drivers. Seperate it out so others can still build when
BLK_DEV_DM/MD is not enabled.
Also change select to depends on to avoid build failures.
Reported-and-tested-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: drop experimental status for ARM_PATCH_PHYS_VIRT
ARM: 7008/1: alignment: Make SIGBUS sent to userspace POSIXly correct
ARM: 7007/1: alignment: Prevent ignoring of faults with ARMv6 unaligned access model
ARM: 7010/1: mm: fix invalid loop for poison_init_mem
ARM: 7005/1: freshen up mm/proc-arm946.S
dmaengine: PL08x: Fix trivial build error
ARM: Fix build error for SMP=n builds
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Really fix build without CONFIG_PCI
powerpc: Fix build without CONFIG_PCI
powerpc/4xx: Fix build of PCI code on 405
powerpc/pseries: Simplify vpa deregistration functions
powerpc/pseries: Cleanup VPA registration and deregistration errors
powerpc/pseries: Fix kexec on recent firmware versions
MAINTAINERS: change maintainership of mpc5xxx
powerpc: Make KVM_GUEST default to n
powerpc/kvm: Fix build errors with older toolchains
powerpc: Lack of ibm,io-events not that important!
powerpc: Move kdump default base address to half RMO size on 64bit
powerpc/perf: Disable pagefaults during callchain stack read
ppc: Remove duplicate definition of PV_POWER7
powerpc: pseries: Fix kexec on machines with more than 4TB of RAM
powerpc: Jump label misalignment causes oops at boot
powerpc: Clean up some panic messages in prom_init
powerpc: Fix device tree claim code
powerpc: Return the_cpu_ spec from identify_cpu
powerpc: mtspr/mtmsr should take an unsigned long
Both AMD and Intel i7 EDAC drivers use MCE features and are thus
dependent of this functionality present in the kernel. Express this in
Kconfig so that randconfig builds don't break.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Brown paper bag day, previous commit wouldn't work very well with modules
enabled. Move the exports into the ifdef.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This has now been well tested, and several platforms are now selecting
this directly. It's time to drop its experimental status.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Close a TOCTOU race for mounts done via ecryptfs-mount-private. The mount
source (device) can be raced when the ownership test is done in userspace.
Provide Ecryptfs a means to force the uid check at mount time.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
syslog-ng versions before 3.3.0beta1 (2011-05-12) assume that
CAP_SYS_ADMIN is sufficient to access syslog, so ever since CAP_SYSLOG
was introduced (2010-11-25) they have triggered a warning.
Commit ee24aebffb ("cap_syslog: accept CAP_SYS_ADMIN for now")
improved matters a little by making syslog-ng work again, just keeping
the WARN_ONCE(). But still, this is a warning that writes a stack trace
we don't care about to syslog, sets a taint flag, and alarms sysadmins
when nothing worse has happened than use of an old userspace with a
recent kernel.
Convert the WARN_ONCE to a printk_once to avoid that while continuing to
give userspace developers a hint that this is an unwanted
backward-compatibility feature and won't be around forever.
Reported-by: Ralf Hildebrandt <ralf.hildebrandt@charite.de>
Reported-by: Niels <zorglub_olsen@hotmail.com>
Reported-by: Paweł Sikora <pluto@agmk.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Liked-by: Gergely Nagy <algernon@madhouse-project.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 8521fc50d4.
The patch incorrectly assumes that using atomic FLUSHING_CACHED_CHARGE
bit operations is sufficient but that is not true. Johannes Weiner has
reported a crash during parallel memory cgroup removal:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffff81083b70>] css_is_ancestor+0x20/0x70
Oops: 0000 [#1] PREEMPT SMP
Pid: 19677, comm: rmdir Tainted: G W 3.0.0-mm1-00188-gf38d32b #35 ECS MCP61M-M3/MCP61M-M3
RIP: 0010:[<ffffffff81083b70>] css_is_ancestor+0x20/0x70
RSP: 0018:ffff880077b09c88 EFLAGS: 00010202
Process rmdir (pid: 19677, threadinfo ffff880077b08000, task ffff8800781bb310)
Call Trace:
[<ffffffff810feba3>] mem_cgroup_same_or_subtree+0x33/0x40
[<ffffffff810feccf>] drain_all_stock+0x11f/0x170
[<ffffffff81103211>] mem_cgroup_force_empty+0x231/0x6d0
[<ffffffff811036c4>] mem_cgroup_pre_destroy+0x14/0x20
[<ffffffff81080559>] cgroup_rmdir+0xb9/0x500
[<ffffffff81114d26>] vfs_rmdir+0x86/0xe0
[<ffffffff81114e7b>] do_rmdir+0xfb/0x110
[<ffffffff81114ea6>] sys_rmdir+0x16/0x20
[<ffffffff8154d76b>] system_call_fastpath+0x16/0x1b
We are crashing because we try to dereference cached memcg when we are
checking whether we should wait for draining on the cache. The cache is
already cleaned up, though.
There is also a theoretical chance that the cached memcg gets freed
between we test for the FLUSHING_CACHED_CHARGE and dereference it in
mem_cgroup_same_or_subtree:
CPU0 CPU1 CPU2
mem=stock->cached
stock->cached=NULL
clear_bit
test_and_set_bit
test_bit() ...
<preempted> mem_cgroup_destroy
use after free
The percpu_charge_mutex protected from this race because sync draining
is exclusive.
It is safer to revert now and come up with a more parallel
implementation later.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/ecryptfs/keystore.c: In function ‘ecryptfs_generate_key_packet_set’:
fs/ecryptfs/keystore.c:1991:28: warning: ‘payload_len’ may be used uninitialized in this function [-Wuninitialized]
fs/ecryptfs/keystore.c:1976:9: note: ‘payload_len’ was declared here
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch fixes the compile error reported at the address:
https://bugzilla.kernel.org/show_bug.cgi?id=40292
The problem arises when compiling eCryptfs as built-in and the 'encrypted'
key type as a module. The patch prevents this combination from being set in
the kernel configuration, by fixing the eCryptfs dependencies.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Reported-by: David Hill <hilld@binarystorm.net>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
When an eCryptfs inode's lower file has been closed, and the pointer has
been set to NULL, return an error when trying to do a lower read or
write rather than calling BUG().
https://bugzilla.kernel.org/show_bug.cgi?id=37292
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
The external symbol files are generated by JIT compilers, for example, but we
need to make sure they're ours before injecting them to 'perf report'.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1312919658-17158-1-git-send-email-penberg@kernel.org
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
deactivate_slab() has the comparison if more than the minimum number of
partial pages are in the partial list wrong. An effect of this may be that
empty pages are not freed from deactivate_slab(). The result could be an
OOM due to growth of the partial slabs per node. Frees mostly occur from
__slab_free which is okay so this would only affect use cases where a lot
of switching around of per cpu slabs occur.
Switching per cpu slabs occurs with high frequency if debugging options are
enabled.
Reported-and-tested-by: Xiaotian Feng <xtfeng@gmail.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
The 'perf sched' command usage still showing 'trace' command instead of
the 'script' command.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110809124651.GD2056@jolsa.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The session object is released prematurely when processing events for
latency command. The session's thread objects are used within the
output_lat_thread function.
Runnning following commands:
# perf sched record
# perf sched latency
the latter displays incorrect data and might cause access violation.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312837414-3819-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: fix check_bytes() for slub debugging
slub: Fix full list corruption if debugging is on
Just like we do already for perf.data files.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christian Ohm <chr.ohm@gmx.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qgokmxsmvppwpc5404qhyk7e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
sound: pss - don't use the deprecated function check_region
ALSA: timer - Add NULL-check for invalid slave timer
ALSA: timer - Fix Oops at closing slave timer
ASoC: Acknowledge WM8996 interrupts before acting on them
ASoC: Rename WM8915 to WM8996
ALSA: Fix dependency of CONFIG_SND_TEA575X
ALSA: asihpi - use kzalloc()
ALSA: snd-usb-caiaq: Fix keymap for RigKontrol3
ALSA: snd-usb: Fix uninitialized variable usage
ALSA: hda - Fix a complile warning in patch_via.c
ALSA: hdspm - Fix uninitialized compile warnings
ALSA: usb-audio - add quirk for Keith McMillen StringPort
ALSA: snd-usb: operate on given mixer interface only
ALSA: snd-usb: avoid dividing by zero on invalid input
ALSA: snd-usb: Accept UAC2 FORMAT_TYPE descriptors with bLength > 6
sound: oss/pas2: Remove CLOCK_TICK_RATE dependency from PAS16 driver
ALSA: hda - Use auto-parser for ASUS UX50, Eee PC P901, S101 and P1005
ALSA: hda - Fix digital-mic mono recording on ASUS Eee PC
ASoC: sgtl5000: fix cache handling
ASoC: Disable wm_hubs periodic DC servo update
The private object support has migrated from gma500 into the DRM core,
remove our now clashing copy.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The check_bytes() function is used by slub debugging. It returns a pointer
to the first unmatching byte for a character in the given memory area.
If the character for matching byte is greater than 0x80, check_bytes()
doesn't work. Becuase 64-bit pattern is generated as below.
value64 = value | value << 8 | value << 16 | value << 24;
value64 = value64 | value64 << 32;
The integer promotions are performed and sign-extended as the type of value
is u8. The upper 32 bits of value64 is 0xffffffff in the first line, and
the second line has no effect.
This fixes the 64-bit pattern generation.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Reviewed-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Add support to Romely-EP SandyBridge.
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Anhua Xu <anhua.xu@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312264895-2010-1-git-send-email-youquan.song@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the UM_SIGNAL alignment fault mode, no siginfo structure is
passed to userspace.
POSIX specifies how siginfo_t should be populated for alignment
faults, so this patch does just that:
* si_signo = SIGBUS
* si_code = BUS_ADRALN
* si_addr = misaligned data address at which access was attempted
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
