This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead. The ondisk format is of course left
unchanged.
This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.
Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.
This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.
Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.
Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:
text data bss dec hex filename
615957 2960 3848 622765 980ad fs/xfs/xfs.o
617231 3152 3848 624231 98667 fs/xfs/xfs.o.old
Fallout:
- xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
the inode locked and xfs_qm_dqattach which does the locking around it,
thus removing XFS_QMOPT_ILOCKED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
If we fail to initialise the VFS inode in inode_init_always(),
it will call ->delete_inode internally resulting in the inode being
freed. Hence we need to delay the call to inode_init_always()
until after the XFS inode is sufficient set up to handle a
call to ->delete_inode, and then if that fails do not touch
the inode again at all as it has been freed.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The inode can't be locked by anyone else as we just created it a few
lines above and it's not been added to any lookup data structure yet.
So use a trylock that must succeed to get around the lockdep warnings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Move the inode tracing into xfs_iget.c / xfs_inode.h and kill xfs_vnode.c
now that it's empty.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
There are a few inode flags around that aren't used anywhere, so remove
them. Also update xfsidbg to display all used inode flags correctly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Merge xfs_iextract and xfs_idestroy into xfs_ireclaim as they are never
called individually. Also rewrite most comments in this area as they
were severly out of date.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Allocate the inode in xfs_iget_cache_miss and pass it into xfs_iread. This
simplifies the error handling and allows xfs_iread to be shared with userspace
which already uses these semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Just pass down the XFS_IGET_* flags all the way down to xfs_imap instead
of translating them mid-way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
If we get a race looking up a reclaimable inode, we can end up with the
winner proceeding to use the inode before it has been completely
re-initialised. This is a Bad Thing.
Fix the race by checking whether we are still initialising the inod eonce
we have a reference to it, and if so wait for the initialisation to
complete before continuing.
While there, fix a leaked reference count in the same code when
encountering an unlinked inode and we are not doing a lookup for a create
operation.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32429a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
To make sure we free the security data inodes need to be freed using the
proper VFS helper (which we also need to export for this). We mark these
inodes bad so we can skip the flush path for them.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32398a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
When we are inside a radix tree preload region, we cannot sleep. Recently
we moved the inode locking inside the preload region for the inode radix
tree. Fix that, and fix a missed unlock in another error path in the same
code at the same time.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32385a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32353a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32334a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Prepare for removing the deleted inode list by marking inodes for reclaim
in the inode radix trees so that we can use the radix trees to find
reclaimable inodes.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32331a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
To avoid issues with different lifecycles of XFS and Linux inodes, embedd
the linux inode inside the XFS inode. This means that the linux inode has
the same lifecycle as the XFS inode, even when it has been released by the
OS. XFS inodes don't live much longer than this (a short stint in reclaim
at most), so there isn't significant memory usage penalties here.
Version 3 o kill xfs_icount()
Version 2 o remove unused commented out code from xfs_iget(). o kill
useless cast in VFS_I()
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32323a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
There are really two cases in xfs_iget_core(). The first is the cache hit
case, the second is the miss case. They share very little code, and hence
can easily be factored out into separate functions. This makes the code
much easier to understand and subsequently modify.
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32317a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
There are no more callers to xfs_sync() now, so remove the function
altogther.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32311a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now we've removed all users of the mount inode list, we can kill it. This
reduces the size of the xfs_inode by 2 pointers.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32293a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Lock debugging reported the ilock was being destroyed without being
unlocked. We don't need to lock the inode until we are going to insert it
into the radix tree.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32159a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
To avoid having to initialise some fields of the XFS inode on every
allocation, we can use the slab init-once feature to initialise them. All
we have to guarantee is that when we free the inode, all it's entries are
in the initial state. Add asserts where possible to ensure debug kernels
check this initial state before freeing and after allocation.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31925a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Sanitize setting up the Linux indode.
Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now
because that's the only place it needs to be done, xfs_initialize_vnode is
renamed to xfs_setup_inode and loses all superflous paramaters. The check
for I_NEW is removed because it always is true and the di_mode check moves
into xfs_iget_core because it's only needed there.
xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode
and the whole things is moved into xfs_iops.c where it belongs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31782a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In several places we directly convert from the XFS inode
to the linux (VFS) inode by a simple deference of ip->i_vnode.
We should not do this - a helper function should be used to
extract the VFS inode from the XFS inode.
Introduce the function VFS_I() to extract the VFS inode
from the XFS inode. The name was chosen to match XFS_I() which
is used to extract the XFS inode from the VFS inode.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31720a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The writer field is not needed for non_DEBU builds so remove it. While
we're at i also clean up the interface for is locked asserts to go through
and xfs_iget.c helper with an interface like the xfs_ilock routines to
isolated the XFS codebase from mrlock internals. That way we can kill
mrlock_t entirely once rw_semaphores grow an islocked facility. Also
remove unused flags to the ilock family of functions.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30902a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the xfs_icluster structure and replace with a radix tree lookup.
We don't need to keep a list of inodes in each cluster around anymore as
we can look them up quickly when we need to. The only time we need to do
this now is during inode writeback.
Factor the inode cluster writeback code out of xfs_iflush and convert it
to use radix_tree_gang_lookup() instead of walking a list of inodes built
when we first read in the inodes.
This remove 3 pointers from each xfs_inode structure and the xfs_icluster
structure per inode cluster. Hence we reduce the cache footprint of the
xfs_inodes by between 5-10% depending on cluster sparseness.
To be truly efficient we need a radix_tree_gang_lookup_range() call to
stop searching once we are past the end of the cluster instead of trying
to find a full cluster's worth of inodes.
Before (ia64):
$ cat /sys/slab/xfs_inode/object_size 536
After:
$ cat /sys/slab/xfs_inode/object_size 512
SGI-PV: 977460
SGI-Modid: xfs-linux-melb:xfs-kern:30502a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If the radix_tree_preload() fails, we need to destroy the inode we just
read in before trying again. This could leak xfs_vnode structures when
there is memory pressure. Noticed by Christoph Hellwig.
SGI-PV: 977823
SGI-Modid: xfs-linux-melb:xfs-kern:30606a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The log force added in xfs_iget_core() has been a performance issue since
it was introduced for tight loops that allocate then unlink a single file.
under heavy writeback, this can introduce unnecessary latency due tothe
log I/o getting stuck behind bulk data writes.
Fix this latency problem by avoinding the need for the log force by moving
the place we mark linux inode dirty to the transaction commit rather than
on transaction completion.
This also closes a potential hole in the sync code where a linux inode is
not dirty between the time it is modified and the time the log buffer has
been written to disk.
SGI-PV: 972753
SGI-Modid: xfs-linux-melb:xfs-kern:30007a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Get rid of vnode useage in xfs_iget.c and pass Linux inode / xfs_inode
where apropinquate. And kill some useless helpers while we're at it.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29808a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it
just duplicates fields already in xfs_inode, and there is nothing this
abstraction buys us on XFS/Linux. This patch removes it and shrinks source
and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44
bytes in debug/non-debug builds.
SGI-PV: 970852
SGI-Modid: xfs-linux-melb:xfs-kern:29754a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Simplify vnode tracing calls by embedding function name & return addr in
the calling macro.
Also do a lot of vnode->inode renaming for consistency, while we're at it.
SGI-PV: 970335
SGI-Modid: xfs-linux-melb:xfs-kern:29650a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The radix tree based inode caches did away with the inode cluster hashes,
replacing them with a bunch of masking and gang lookups on the radix tree.
This masking got broken when moving the code to per-ag radix trees and
indexing by agino # rather than straight inode number. The result is
clustered inode writeback does not cluster and things can go extremely
slowly when there are lots of inodes to write.
Fix it up by comparing the agino # of the inode we just looked up to the
index of the cluster we are looking for.
Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
SGI-PV: 972915
SGI-Modid: xfs-linux-melb:xfs-kern:30033a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that struct bhv_vfs doesn't have any members left we can kill it and
go directly from the super_block to the xfs_mount everywhere.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29509a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Also remove the now dead behavior code.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29505a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
It's entirely unused except for ignored arguments in the mrlock
initialization, so remove it.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29499a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS
inode. Note that this makes the tracing macros rather misnamed, but this
kind of fallout will be fixed up incrementally later on.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29498a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All flags previously handled at the vnode level are not in the xfs_inode
where we already have a flags mechanisms and free bits for flags
previously in the vnode.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29495a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
One of the perpetual scaling problems XFS has is indexing it's incore
inodes. We currently uses hashes and the default hash sizes chosen can
only ever be a tradeoff between memory consumption and the maximum
realistic size of the cache.
As a result, anyone who has millions of inodes cached on a filesystem
needs to tunes the size of the cache via the ihashsize mount option to
allow decent scalability with inode cache operations.
A further problem is the separate inode cluster hash, whose size is based
on the ihashsize but is smaller, and so under certain conditions (sparse
cluster cache population) this can become a limitation long before the
inode hash is causing issues.
The following patchset removes the inode hash and cluster hash and
replaces them with radix trees to avoid the scalability limitations of the
hashes. It also reduces the size of the inodes by 3 pointers....
SGI-PV: 969561
SGI-Modid: xfs-linux-melb:xfs-kern:29481a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The previous fixes for the use after free in xfs_iunpin left a nasty log
deadlock when xfslogd unpinned the inode and dropped the last reference to
the inode. the ->clear_inode() method can issue transactions, and if the
log was full, the transaction could push on the log and get stuck trying
to push the inode it was currently unpinning.
To fix this, we provide xfs_iunpin a guarantee that it will always have a
valid xfs_inode <-> linux inode link or a particular flag will be set on
the inode. We then use log forces during lookup to ensure transactions are
completed before we recycle the inode. This ensures that xfs_iunpin will
never use the linux inode after it is being freed, and any lookup on an
inode on the reclaim list will wait until it is safe to attach a new linux
inode to the xfs inode.
SGI-PV: 956832
SGI-Modid: xfs-linux-melb:xfs-kern:27359a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Shailendra Tripathi <stripathi@agami.com>
Signed-off-by: Takenori Nagano <t-nagano@ah.jp.nec.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The previous attempts to fix the linux inode use-after-free in xfs_iunpin
simply made the problem harder to hit. We actually need complete exclusion
between xfs_reclaim and xfs_iunpin, as well as ensuring that the i_flags
are consistent during both of these functions. Introduce a new spinlock
for exclusion and the i_flags, and fix up xfs_iunpin to use igrab before
marking the inode dirty.
SGI-PV: 952967
SGI-Modid: xfs-linux-melb:xfs-kern:26964a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
One sema to rule them all, one sema to find them...
SGI-PV: 907752
SGI-Modid: xfs-linux-melb:xfs-kern:26911a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
one page.
SGI-PV: 955302
SGI-Modid: xfs-linux-melb:xfs-kern:26800a
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
